Merge tag 'for-4.2' of git://git.infradead.org/battery-2.6

Pull power supply and reset updates from Sebastian Reichel:

 - new charger drivers: BQ24257, BQ25890, AXP288, RT9455

 - MAX17042 battery: add health & temperature support

 - BQ2415x charger: add ACPI support

 - misc fixes and cleanups

* tag 'for-4.2' of git://git.infradead.org/battery-2.6: (32 commits)
  power_supply: Correct kerneldoc copy paste errors
  wm831x_power: Fix off-by-one at free_irq()
  power_supply: rt9455_charger: Fix error reported by static analysis tool
  power_supply: bq24257: use flags argument of devm_gpiod_get
  power_supply: bq25890: use flags argument of devm_gpiod_get
  sbs-battery: add option to always register battery
  power: Add devm_power_supply_get_by_phandle() helper function
  power_supply: max17042: Add OF support for setting thresholds
  power_supply: sysfs: Bring back write to writeable properties
  power_supply: rt9455_charger: Check if CONFIG_USB_PHY is enabled
  power: reset: gpio-restart: increase priority slightly
  power_supply: bq25890: make chip_id int
  power_supply: Add support for Richtek RT9455 battery charger
  Documentation: devicetree: Add Richtek RT9455 bindings
  of: Add vendor prefix for Richtek Technology Corporation
  power_supply: 88pm860x_charger: Do not call free_irq() twice
  power: bq24190_charger: Change first_time flag reset condition
  power: axp288_charger: axp288 charger driver
  power: max17042_battery: add HEALTH and TEMP_* properties support
  power_supply: Add support for TI BQ25890 charger chip
  ...

5 files changed, 129 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/power/bq24257.txt b/Documentation/devicetree/bindings/power/bq24257.txt
new file mode 100644
index 000000000000..5c9d3940d07c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/bq24257.txt
@@ -0,0 +1,21 @@
+Binding for TI bq24257 Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24257"
+- reg:			   integer, i2c address of the device.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
+- ti,charge-current:	   integer, maximum charging current in uA.
+- ti,termination-current:  integer, charge will be terminated when current in
+			   constant-voltage phase drops below this value (in uA).
+
+Example:
+
+bq24257 {
+	compatible = "ti,bq24257";
+	reg = <0x6a>;
+
+	ti,battery-regulation-voltage = <4200000>;
+	ti,charge-current = <1000000>;
+	ti,termination-current = <50000>;
+};
diff --git a/Documentation/devicetree/bindings/power/bq25890.txt b/Documentation/devicetree/bindings/power/bq25890.txt
new file mode 100644
index 000000000000..c9dd17d142ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/bq25890.txt
@@ -0,0 +1,46 @@
+Binding for TI bq25890 Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+    * "ti,bq25890"
+- reg: integer, i2c address of the device.
+- ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
+- ti,charge-current: integer, maximum charging current (in uA);
+- ti,termination-current: integer, charge will be terminated when current in
+    constant-voltage phase drops below this value (in uA);
+- ti,precharge-current: integer, maximum charge current during precharge
+    phase (in uA);
+- ti,minimum-sys-voltage: integer, when battery is charging and it is below
+    minimum system voltage, the system will be regulated above
+    minimum-sys-voltage setting (in uV);
+- ti,boost-voltage: integer, VBUS voltage level in boost mode (in uV);
+- ti,boost-max-current: integer, maximum allowed current draw in boost mode
+    (in uA).
+
+Optional properties:
+- ti,boost-low-freq: boolean, if present boost mode frequency will be 500kHz,
+    otherwise 1.5MHz;
+- ti,use-ilim-pin: boolean, if present the ILIM resistor will be used and the
+    input current will be the lower between the resistor setting and the IINLIM
+    register setting;
+- ti,thermal-regulation-threshold: integer, temperature above which the charge
+    current is lowered, to avoid overheating (in degrees Celsius). If omitted,
+    the default setting will be used (120 degrees);
+
+Example:
+
+bq25890 {
+        compatible = "ti,bq25890";
+        reg = <0x6a>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+        ti,precharge-current = <128000>;
+        ti,minimum-sys-voltage = <3600000>;
+        ti,boost-voltage = <5000000>;
+        ti,boost-max-current = <1000000>;
+
+        ti,use-ilim-pin;
+        ti,thermal-regulation-threshold = <120>;
+};
diff --git a/Documentation/devicetree/bindings/power/rt9455_charger.txt b/Documentation/devicetree/bindings/power/rt9455_charger.txt
new file mode 100644
index 000000000000..5d9ad5cf2c5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rt9455_charger.txt
@@ -0,0 +1,48 @@
+Binding for Richtek rt9455 battery charger
+
+Required properties:
+- compatible:				it should contain one of the following:
+					"richtek,rt9455".
+- reg:					integer, i2c address of the device.
+- interrupt-parent:			the phandle for the interrupt controller that
+					services interrupts for this device.
+- interrupts:				interrupt mapping for GPIO IRQ, it should be
+					configured with IRQ_TYPE_LEVEL_LOW flag.
+- richtek,output-charge-current:	integer, output current from the charger to the
+					battery, in uA.
+- richtek,end-of-charge-percentage:	integer, percent of the output charge current.
+					When the current in constant-voltage phase drops
+					below output_charge_current x end-of-charge-percentage,
+					charge is terminated.
+- richtek,battery-regulation-voltage:	integer, maximum battery voltage in uV.
+- richtek,boost-output-voltage:		integer, maximum voltage provided to consumer
+					devices, when the charger is in boost mode, in uV.
+
+Optional properties:
+- richtek,min-input-voltage-regulation: integer, input voltage level in uV, used to
+					decrease voltage level when the over current
+					of the input power source occurs.
+					This prevents input voltage drop due to insufficient
+					current provided by the power source.
+					Default: 4500000 uV (4.5V)
+- richtek,avg-input-current-regulation: integer, input current value in uA drained by the
+					charger from the power source.
+					Default: 500000 uA (500mA)
+
+Example:
+
+rt9455@22 {
+	compatible = "richtek,rt9455";
+	reg = <0x22>;
+
+	interrupt-parent = <&gpio1>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+	richtek,output-charge-current	    = <500000>;
+	richtek,end-of-charge-percentage    = <10>;
+	richtek,battery-regulation-voltage  = <4200000>;
+	richtek,boost-output-voltage	    = <5050000>;
+
+	richtek,min-input-voltage-regulation = <4500000>;
+	richtek,avg-input-current-regulation = <500000>;
+};
diff --git a/Documentation/devicetree/bindings/power_supply/max17042_battery.txt b/Documentation/devicetree/bindings/power_supply/max17042_battery.txt
index 5bc9b685cf8a..3f3894aaeebc 100644
--- a/Documentation/devicetree/bindings/power_supply/max17042_battery.txt
+++ b/Documentation/devicetree/bindings/power_supply/max17042_battery.txt
@@ -9,10 +9,23 @@ Optional properties :
                          (datasheet-recommended value is 10000).
    Defining this property enables current-sense functionality.
 
+Optional threshold properties :
+ If skipped the condition won't be reported.
+ - maxim,cold-temp :      Temperature threshold to report battery
+                          as cold (in tenths of degree Celsius).
+ - maxim,over-heat-temp : Temperature threshold to report battery
+                          as over heated (in tenths of degree Celsius).
+ - maxim,dead-volt :      Voltage threshold to report battery
+                          as dead (in mV).
+ - maxim,over-volt :      Voltage threshold to report battery
+                          as over voltage (in mV).
+
 Example:
 
 	battery-charger@36 {
 		compatible = "maxim,max17042";
 		reg = <0x36>;
 		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4300>;
 	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 80339192c93e..7b8c1295fd90 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -161,6 +161,7 @@ ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
+richtek	Richtek Technology Corporation
 ricoh	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor