aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/00-INDEX149
-rw-r--r--Documentation/ABI/testing/sysfs-devices-system-cpu14
-rw-r--r--Documentation/DocBook/kernel-hacking.tmpl4
-rw-r--r--Documentation/x86/x86_64/boot-options.txt4
-rw-r--r--arch/h8300/README2
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-util.c4
-rw-r--r--arch/mips/include/asm/octeon/cvmx-helper-util.h4
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c8
-rw-r--r--arch/powerpc/platforms/86xx/mpc8610_hpcd.c4
-rw-r--r--arch/x86/kernel/cpu/perf_event_amd_ibs.c2
-rw-r--r--arch/xtensa/Kconfig2
-rw-r--r--drivers/bluetooth/ath3k.c2
-rw-r--r--drivers/devfreq/exynos4_bus.c2
-rw-r--r--drivers/firewire/ohci.c2
-rw-r--r--drivers/gpu/drm/i915/i915_debugfs.c2
-rw-r--r--drivers/hid/Kconfig2
-rw-r--r--drivers/ide/Kconfig5
-rw-r--r--drivers/infiniband/hw/cxgb3/iwch_provider.c2
-rw-r--r--drivers/isdn/hardware/eicon/divacapi.h6
-rw-r--r--drivers/isdn/hardware/eicon/pc.h4
-rw-r--r--drivers/isdn/mISDN/l1oip_core.c2
-rw-r--r--drivers/media/platform/soc_camera/mx2_camera.c2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c2
-rw-r--r--drivers/net/ethernet/marvell/mvneta.c1
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_main.c2
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c2
-rw-r--r--drivers/net/irda/ali-ircc.c2
-rw-r--r--drivers/of/address.c2
-rw-r--r--drivers/of/platform.c1
-rw-r--r--drivers/pcmcia/rsrc_nonstatic.c6
-rw-r--r--drivers/rpmsg/virtio_rpmsg_bus.c2
-rw-r--r--drivers/scsi/Kconfig2
-rw-r--r--drivers/staging/android/binder.h2
-rw-r--r--drivers/staging/octeon/ethernet.c2
-rw-r--r--drivers/target/sbp/sbp_target.c2
-rw-r--r--drivers/tty/ipwireless/hardware.c4
-rw-r--r--fs/btrfs/extent-tree.c6
-rw-r--r--fs/btrfs/relocation.c4
-rw-r--r--fs/btrfs/transaction.c1
-rw-r--r--fs/cifs/link.c2
-rw-r--r--fs/hpfs/inode.c2
-rw-r--r--fs/jfs/super.c2
-rw-r--r--fs/ocfs2/cluster/tcp.c2
-rw-r--r--fs/qnx6/inode.c2
-rw-r--r--include/linux/dma-buf.h2
-rw-r--r--include/linux/percpu_counter.h2
-rw-r--r--include/net/irda/irlmp.h2
-rw-r--r--include/net/irda/irttp.h2
-rw-r--r--net/bluetooth/hci_core.c2
-rw-r--r--net/caif/cfcnfg.c2
-rw-r--r--net/irda/timer.c2
-rw-r--r--net/sctp/sm_make_chunk.c2
-rw-r--r--scripts/basic/fixdep.c2
-rw-r--r--sound/soc/codecs/ab8500-codec.c2
-rw-r--r--sound/soc/codecs/wm8974.c6
-rw-r--r--sound/soc/codecs/wm8978.c6
-rw-r--r--sound/soc/codecs/wm8983.c6
-rw-r--r--sound/soc/codecs/wm8985.c6
58 files changed, 215 insertions, 110 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 8afe64fb200..0f3e8bbab8d 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -2,7 +2,7 @@
This is a brief list of all the files in ./linux/Documentation and what
they contain. If you add a documentation file, please list it here in
alphabetical order as well, or risk being hunted down like a rabid dog.
-Please try and keep the descriptions small enough to fit on one line.
+Please keep the descriptions small enough to fit on one line.
Thanks -- Paul G.
Following translations are available on the WWW:
@@ -20,24 +20,33 @@ BUG-HUNTING
Changes
- list of changes that break older software packages.
CodingStyle
- - how the boss likes the C code in the kernel to look.
-development-process/
- - An extended tutorial on how to work with the kernel development
- process.
+ - how the maintainers expect the C code in the kernel to look.
DMA-API.txt
- DMA API, pci_ API & extensions for non-consistent memory machines.
+DMA-API-HOWTO.txt
+ - Dynamic DMA mapping Guide
DMA-ISA-LPC.txt
- How to do DMA with ISA (and LPC) devices.
+DMA-attributes.txt
+ - listing of the various possible attributes a DMA region can have
DocBook/
- directory with DocBook templates etc. for kernel documentation.
+EDID/
+ - directory with info on customizing EDID for broken gfx/displays.
HOWTO
- the process and procedures of how to do Linux kernel development.
IPMI.txt
- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
IRQ-affinity.txt
- how to select which CPU(s) handle which interrupt events on SMP.
+IRQ-domain.txt
+ - info on inerrupt numbering and setting up IRQ domains.
IRQ.txt
- description of what an IRQ is.
+Intel-IOMMU.txt
+ - basic info on the Intel IOMMU virtualization support.
+Makefile
+ - some files in Documentation dir are actually sample code to build
ManagementStyle
- how to (attempt to) manage kernel hackers.
RCU/
@@ -66,10 +75,16 @@ applying-patches.txt
- description of various trees and how to apply their patches.
arm/
- directory with info about Linux on the ARM architecture.
+arm64/
+ - directory with info about Linux on the 64 bit ARM architecture.
atomic_ops.txt
- semantics and behavior of atomic and bitmask operations.
auxdisplay/
- misc. LCD driver documentation (cfag12864b, ks0108).
+backlight/
+ - directory with info on controlling backlights in flat panel displays
+bad_memory.txt
+ - how to use kernel parameters to exclude bad RAM regions.
basic_profiling.txt
- basic instructions for those who wants to profile Linux kernel.
binfmt_misc.txt
@@ -80,8 +95,14 @@ block/
- info on the Block I/O (BIO) layer.
blockdev/
- info on block devices & drivers
+braille-console.txt
+ - info on how to use serial devices for Braille support.
+bt8xxgpio.txt
+ - info on how to modify a bt8xx video card for GPIO usage.
btmrvl.txt
- info on Marvell Bluetooth driver usage.
+bus-devices/
+ - directory with info on TI GPMC (General Purpose Memory Controller)
bus-virt-phys-mapping.txt
- how to access I/O mapped memory from within device drivers.
cachetlb.txt
@@ -90,6 +111,12 @@ cdrom/
- directory with information on the CD-ROM drivers that Linux has.
cgroups/
- cgroups features, including cpusets and memory controller.
+circular-buffers.txt
+ - how to make use of the existing circular buffer infrastructure
+clk.txt
+ - info on the common clock framework
+coccinelle.txt
+ - info on how to get and use the Coccinelle code checking tool.
connector/
- docs on the netlink based userspace<->kernel space communication mod.
console/
@@ -114,24 +141,42 @@ dcdbas.txt
- information on the Dell Systems Management Base Driver.
debugging-modules.txt
- some notes on debugging modules after Linux 2.6.3.
+debugging-via-ohci1394.txt
+ - how to use firewire like a hardware debugger memory reader.
dell_rbu.txt
- document demonstrating the use of the Dell Remote BIOS Update driver.
+development-process/
+ - how to work with the mainline kernel development process.
device-mapper/
- directory with info on Device Mapper.
devices.txt
- plain ASCII listing of all the nodes in /dev/ with major minor #'s.
+devicetree/
+ - directory with info on device tree files used by OF/PowerPC/ARM
+digsig.txt
+ -info on the Digital Signature Verification API
+dma-buf-sharing.txt
+ - the DMA Buffer Sharing API Guide
+dmaengine.txt
+ -the DMA Engine API Guide
dontdiff
- file containing a list of files that should never be diff'ed.
driver-model/
- directory with info about Linux driver model.
dvb/
- info on Linux Digital Video Broadcast (DVB) subsystem.
+dynamic-debug-howto.txt
+ - how to use the dynamic debug (dyndbg) feature.
early-userspace/
- info about initramfs, klibc, and userspace early during boot.
edac.txt
- information on EDAC - Error Detection And Correction
eisa.txt
- info on EISA bus support.
+email-clients.txt
+ - info on how to use e-mail to send un-mangled (git) patches.
+extcon/
+ - directory with porting guide for Android kernel switch driver.
fault-injection/
- dir with docs about the fault injection capabilities infrastructure.
fb/
@@ -140,12 +185,22 @@ filesystems/
- info on the vfs and the various filesystems that Linux supports.
firmware_class/
- request_firmware() hotplug interface info.
+flexible-arrays.txt
+ - how to make use of flexible sized arrays in linux
frv/
- Fujitsu FR-V Linux documentation.
+futex-requeue-pi.txt
+ - info on requeueing of tasks from a non-PI futex to a PI futex
+gcov.txt
+ - use of GCC's coverage testing tool "gcov" with the Linux kernel
gpio.txt
- overview of GPIO (General Purpose Input/Output) access conventions.
+hid/
+ - directory with information on human interface devices
highuid.txt
- notes on the change from 16 bit to 32 bit user/group IDs.
+hwspinlock.txt
+ - hardware spinlock provides hardware assistance for synchronization
timers/
- info on the timer related topics
hw_random.txt
@@ -162,10 +217,14 @@ ia64/
- directory with info about Linux on Intel 64 bit architecture.
infiniband/
- directory with documents concerning Linux InfiniBand support.
+init.txt
+ - what to do when the kernel can't find the 1st process to run.
initrd.txt
- how to use the RAM disk as an initial/temporary root filesystem.
input/
- info on Linux input device support.
+intel_txt.txt
+ - info on intel Trusted Execution Technology (intel TXT).
io-mapping.txt
- description of io_mapping functions in linux/io-mapping.h
io_ordering.txt
@@ -182,6 +241,8 @@ isdn/
- directory with info on the Linux ISDN support, and supported cards.
java.txt
- info on the in-kernel binary support for Java(tm).
+ja_JP/
+ - directory with Japanese translations of various documents
kbuild/
- directory with info about the kernel build process.
kdump/
@@ -192,6 +253,12 @@ kernel-docs.txt
- listing of various WWW + books that document kernel internals.
kernel-parameters.txt
- summary listing of command line / boot prompt args for the kernel.
+kmemcheck.txt
+ - info on dynamic checker that detects uses of uninitialized memory.
+kmemleak.txt
+ - info on how to make use of the kernel memory leak detection system
+ko_KR/
+ - directory with Korean translations of various documents
kobject.txt
- info of the kobject infrastructure of the Linux kernel.
kprobes.txt
@@ -208,6 +275,8 @@ local_ops.txt
- semantics and behavior of local atomic operations.
lockdep-design.txt
- documentation on the runtime locking correctness validator.
+lockstat.txt
+ - info on collecting statistics on locks (and contention).
lockup-watchdogs.txt
- info on soft and hard lockup detectors (aka nmi_watchdog).
logo.gif
@@ -220,16 +289,26 @@ magic-number.txt
- list of magic numbers used to mark/protect kernel data structures.
md.txt
- info on boot arguments for the multiple devices driver.
+media-framework.txt
+ - info on media framework, its data structures, functions and usage.
memory-barriers.txt
- info on Linux kernel memory barriers.
+memory-devices/
+ - directory with info on parts like the Texas Instruments EMIF driver
memory-hotplug.txt
- Hotpluggable memory support, how to use and current status.
memory.txt
- info on typical Linux memory problems.
mips/
- directory with info about Linux on MIPS architecture.
+misc-devices/
+ - directory with info about devices using the misc dev subsystem
mmc/
- directory with info about the MMC subsystem
+mn10300/
+ - directory with info about the mn10300 architecture port
+mtd/
+ - directory with info about memory technology devices (flash)
mono.txt
- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
mutex-design.txt
@@ -240,6 +319,8 @@ netlabel/
- directory with information on the NetLabel subsystem.
networking/
- directory with info on various aspects of networking with Linux.
+nfc/
+ - directory relating info about Near Field Communications support.
nommu-mmap.txt
- documentation about no-mmu memory mapping support.
numastat.txt
@@ -256,26 +337,46 @@ parport-lowlevel.txt
- description and usage of the low level parallel port functions.
pcmcia/
- info on the Linux PCMCIA driver.
+percpu-rw-semaphore.txt
+ - RCU based read-write semaphore optimized for locking for reading
pi-futex.txt
- - documentation on lightweight PI-futexes.
+ - documentation on lightweight priority inheritance futexes.
+pinctrl.txt
+ - info on pinctrl subsystem and the PINMUX/PINCONF and drivers
pnp.txt
- Linux Plug and Play documentation.
power/
- directory with info on Linux PCI power management.
powerpc/
- directory with info on using Linux with the PowerPC.
+prctl/
+ - directory with info on the priveledge control subsystem
preempt-locking.txt
- info on locking under a preemptive kernel.
printk-formats.txt
- how to get printk format specifiers right
+pps/
+ - directory with information on the pulse-per-second support
+ptp/
+ - directory with info on support for IEEE 1588 PTP clocks in Linux.
+pwm.txt
+ - info on the pulse width modulation driver subsystem
ramoops.txt
- documentation of the ramoops oops/panic logging module.
+rapidio/
+ - directory with info on RapidIO packet-based fabric interconnect
rbtree.txt
- info on what red-black trees are and what they are for.
+remoteproc.txt
+ - info on how to handle remote processor (e.g. AMP) offloads/usage.
+rfkill.txt
+ - info on the radio frequency kill switch subsystem/support.
robust-futex-ABI.txt
- documentation of the robust futex ABI.
robust-futexes.txt
- a description of what robust futexes are.
+rpmsg.txt
+ - info on the Remote Processor Messaging (rpmsg) Framework
rt-mutex-design.txt
- description of the RealTime mutex implementation design.
rt-mutex.txt
@@ -300,10 +401,10 @@ sgi-visws.txt
- short blurb on the SGI Visual Workstations.
sh/
- directory with info on porting Linux to a new architecture.
+smsc_ece1099.txt
+ -info on the smsc Keyboard Scan Expansion/GPIO Expansion device.
sound/
- directory with info on sound card support.
-sparc/
- - directory with info on using Linux on Sparc architecture.
sparse.txt
- info on how to obtain and use the sparse tool for typechecking.
spi/
@@ -314,6 +415,8 @@ stable_api_nonsense.txt
- info on why the kernel does not have a stable in-kernel api or abi.
stable_kernel_rules.txt
- rules and procedures for the -stable kernel releases.
+static-keys.txt
+ - info on how static keys allow debug code in hotpaths via patching
svga.txt
- short guide on selecting video modes at boot via VGA BIOS.
sysfs-rules.txt
@@ -322,27 +425,53 @@ sysctl/
- directory with info on the /proc/sys/* files.
sysrq.txt
- info on the magic SysRq key.
-telephony/
- - directory with info on telephony (e.g. voice over IP) support.
+target/
+ - directory with info on generating TCM v4 fabric .ko modules
+thermal/
+ - directory with information on managing thermal issues (CPU/temp)
+trace/
+ - directory with info on tracing technologies within linux
+unaligned-memory-access.txt
+ - info on how to avoid arch breaking unaligned memory access in code.
unicode.txt
- info on the Unicode character/font mapping used in Linux.
unshare.txt
- description of the Linux unshare system call.
usb/
- directory with info regarding the Universal Serial Bus.
+vDSO/
+ - directory with info regarding virtual dynamic shared objects
+vfio.txt
+ - info on Virtual Function I/O used in guest/hypervisor instances.
+vgaarbiter.txt
+ - info on enable/disable the legacy decoding on different VGA devices
video-output.txt
- sysfs class driver interface to enable/disable a video output device.
video4linux/
- directory with info regarding video/TV/radio cards and linux.
+virtual/
+ - directory with information on the various linux virtualizations.
vm/
- directory with info on the Linux vm code.
+vme_api.txt
+ - file relating info on the VME bus API in linux
volatile-considered-harmful.txt
- Why the "volatile" type class should not be used
w1/
- directory with documents regarding the 1-wire (w1) subsystem.
watchdog/
- how to auto-reboot Linux if it has "fallen and can't get up". ;-)
+wimax/
+ - directory with info about Intel Wireless Wimax Connections
+workqueue.txt
+ - information on the Concurrency Managed Workqueue implementation
x86/x86_64/
- directory with info on Linux support for AMD x86-64 (Hammer) machines.
+xtensa/
+ - directory with documents relating to arch/xtensa port/implementation
+xz.txt
+ - how to make use of the XZ data compression within linux kernel
+zh_CN/
+ - directory with Chinese translations of various documents
zorro.txt
- info on writing drivers for Zorro bus devices found on Amigas.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 6943133afcb..9c978dcae07 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -67,20 +67,6 @@ Description: Discover NUMA node a CPU belongs to
/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
-What: /sys/devices/system/cpu/cpu#/node
-Date: October 2009
-Contact: Linux memory management mailing list <linux-mm@kvack.org>
-Description: Discover NUMA node a CPU belongs to
-
- When CONFIG_NUMA is enabled, a symbolic link that points
- to the corresponding NUMA node directory.
-
- For example, the following symlink is created for cpu42
- in NUMA node 2:
-
- /sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
-
-
What: /sys/devices/system/cpu/cpu#/topology/core_id
/sys/devices/system/cpu/cpu#/topology/core_siblings
/sys/devices/system/cpu/cpu#/topology/core_siblings_list
diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl
index 22e0bd1adf2..d0758b241b2 100644
--- a/Documentation/DocBook/kernel-hacking.tmpl
+++ b/Documentation/DocBook/kernel-hacking.tmpl
@@ -945,7 +945,7 @@ printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
<sect1 id="sym-exportsymbols">
<title><function>EXPORT_SYMBOL()</function>
- <filename class="headerfile">include/linux/module.h</filename></title>
+ <filename class="headerfile">include/linux/export.h</filename></title>
<para>
This is the classic method of exporting a symbol: dynamically
@@ -955,7 +955,7 @@ printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
<sect1 id="sym-exportsymbols-gpl">
<title><function>EXPORT_SYMBOL_GPL()</function>
- <filename class="headerfile">include/linux/module.h</filename></title>
+ <filename class="headerfile">include/linux/export.h</filename></title>
<para>
Similar to <function>EXPORT_SYMBOL()</function> except that the
diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt
index de38429beb7..e015a83c399 100644
--- a/Documentation/x86/x86_64/boot-options.txt
+++ b/Documentation/x86/x86_64/boot-options.txt
@@ -112,10 +112,6 @@ Timing
This can be used to work around timing problems on multiprocessor systems
with not properly synchronized CPUs.
- report_lost_ticks
- Report when timer interrupts are lost because some code turned off
- interrupts for too long.
-
nohpet
Don't use the HPET timer.
diff --git a/arch/h8300/README b/arch/h8300/README
index 637f5a02f31..efa805fda19 100644
--- a/arch/h8300/README
+++ b/arch/h8300/README
@@ -11,7 +11,7 @@ H8/300H and H8S
2.AE 3068/AE 3069
more information
MICROTRONIQUE <http://www.microtronique.com/>
- Akizuki Denshi Tsusho Ltd. <http://www.akizuki.ne.jp> (Japanese Only)
+ Akizuki Denshi Tsusho Ltd. <http://akizukidenshi.com/> (Japanese Only)
3.H8MAX
see http://ip-sol.jp/h8max/ (Japanese Only)
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
index 116dea17acf..dfdfe8bdc9c 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
@@ -175,7 +175,7 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work)
* Packets will begin slowly dropping when there are less than
* this many packet buffers free in FPA 0.
* @drop_thresh:
- * All incomming packets will be dropped when there are less
+ * All incoming packets will be dropped when there are less
* than this many free packet buffers in FPA 0.
* Returns Zero on success. Negative on failure
*/
@@ -210,7 +210,7 @@ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh)
* Packets will begin slowly dropping when there are less than
* this many packet buffers free in FPA 0.
* @drop_thresh:
- * All incomming packets will be dropped when there are less
+ * All incoming packets will be dropped when there are less
* than this many free packet buffers in FPA 0.
* Returns Zero on success. Negative on failure
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-util.h b/arch/mips/include/asm/octeon/cvmx-helper-util.h
index 6a6e52fc22c..01c8ddd84ff 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-util.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-util.h
@@ -60,7 +60,7 @@ extern int cvmx_helper_dump_packet(cvmx_wqe_t *work);
* Packets will begin slowly dropping when there are less than
* this many packet buffers free in FPA 0.
* @drop_thresh:
- * All incomming packets will be dropped when there are less
+ * All incoming packets will be dropped when there are less
* than this many free packet buffers in FPA 0.
* Returns Zero on success. Negative on failure
*/
@@ -74,7 +74,7 @@ extern int cvmx_helper_setup_red_queue(int queue, int pass_thresh,
* Packets will begin slowly dropping when there are less than
* this many packet buffers free in FPA 0.
* @drop_thresh:
- * All incomming packets will be dropped when there are less
+ * All incoming packets will be dropped when there are less
* than this many free packet buffers in FPA 0.
* Returns Zero on success. Negative on failure
*/
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 7328b8d7412..e346edf7f15 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -215,13 +215,13 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
/* Map the global utilities registers. */
guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
if (!guts_node) {
- pr_err("p1022ds: missing global utilties device node\n");
+ pr_err("p1022ds: missing global utilities device node\n");
return;
}
guts = of_iomap(guts_node, 0);
if (!guts) {
- pr_err("p1022ds: could not map global utilties device\n");
+ pr_err("p1022ds: could not map global utilities device\n");
goto exit;
}
@@ -416,14 +416,14 @@ void p1022ds_set_pixel_clock(unsigned int pixclock)
/* Map the global utilities registers. */
guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
if (!guts_np) {
- pr_err("p1022ds: missing global utilties device node\n");
+ pr_err("p1022ds: missing global utilities device node\n");
return;
}
guts = of_iomap(guts_np, 0);
of_node_put(guts_np);
if (!guts) {
- pr_err("p1022ds: could not map global utilties device\n");
+ pr_err("p1022ds: could not map global utilities device\n");
return;
}
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 04d9d317f74..d479d68fbb2 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -236,14 +236,14 @@ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
/* Map the global utilities registers. */
guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts");
if (!guts_np) {
- pr_err("mpc8610hpcd: missing global utilties device node\n");
+ pr_err("mpc8610hpcd: missing global utilities device node\n");
return;
}
guts = of_iomap(guts_np, 0);
of_node_put(guts_np);
if (!guts) {
- pr_err("mpc8610hpcd: could not map global utilties device\n");
+ pr_err("mpc8610hpcd: could not map global utilities device\n");
return;
}
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index 6336bcbd061..5f0581e713c 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -528,7 +528,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs)
if (!test_bit(IBS_STARTED, pcpu->state)) {
/*
* Catch spurious interrupts after stopping IBS: After
- * disabling IBS there could be still incomming NMIs
+ * disabling IBS there could be still incoming NMIs
* with samples that even have the valid bit cleared.
* Mark all this NMIs as handled.
*/
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index ad64c73b867..cb557be492b 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -22,7 +22,7 @@ config XTENSA
configurable and extensible. The Linux port to the Xtensa
architecture supports all processor configurations and extensions,
with reasonable minimum requirements. The Xtensa Linux project has
- a home page at <http://xtensa.sourceforge.net/>.
+ a home page at <http://www.linux-xtensa.org/>.
config RWSEM_XCHGADD_ALGORITHM
def_bool y
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 33c9a44a967..a8a41e07a22 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -349,7 +349,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
ret = ath3k_get_state(udev, &fw_state);
if (ret < 0) {
- BT_ERR("Can't get state to change to load configration err");
+ BT_ERR("Can't get state to change to load configuration err");
return -EBUSY;
}
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 46d94e9e95b..3f37f3b3f26 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -658,7 +658,7 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
if (old_freq == freq)
return 0;
- dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt);
+ dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt);
mutex_lock(&data->lock);
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 6ce6e07c38c..45912e6e0ac 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -329,7 +329,7 @@ module_param_named(quirks, param_quirks, int, 0644);
MODULE_PARM_DESC(quirks, "Chip quirks (default = 0"
", nonatomic cycle timer = " __stringify(QUIRK_CYCLE_TIMER)
", reset packet generation = " __stringify(QUIRK_RESET_PACKET)
- ", AR/selfID endianess = " __stringify(QUIRK_BE_HEADERS)
+ ", AR/selfID endianness = " __stringify(QUIRK_BE_HEADERS)
", no 1394a enhancements = " __stringify(QUIRK_NO_1394A)
", disable MSI = " __stringify(QUIRK_NO_MSI)
", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 9d4a2c2adf0..32158d21c63 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1460,7 +1460,7 @@ static const char *swizzle_string(unsigned swizzle)
case I915_BIT_6_SWIZZLE_9_10_17:
return "bit9/bit10/bit17";
case I915_BIT_6_SWIZZLE_UNKNOWN:
- return "unkown";
+ return "unknown";
}
return "bug";
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e7d6a13ec6a..eae0c7e468c 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -320,7 +320,7 @@ config HID_LOGITECH_DJ
Say Y if you want support for Logitech Unifying receivers and devices.
Unifying receivers are capable of pairing up to 6 Logitech compliant
devices to the same receiver. Without this driver it will be handled by
- generic USB_HID driver and all incomming events will be multiplexed
+ generic USB_HID driver and all incoming events will be multiplexed
into a single mouse and a single keyboard device.
config LOGITECH_FF
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3c4417a1d43..02906ca99b4 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -700,11 +700,6 @@ config BLK_DEV_IDE_TX4939
depends on SOC_TX4939
select BLK_DEV_IDEDMA_SFF
-config BLK_DEV_IDE_AT91
- tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
- depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
- select IDE_TIMINGS
-
config BLK_DEV_IDE_ICSIDE
tristate "ICS IDE interface support"
depends on ARM && ARCH_ACORN
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 0bdf09aa6f4..145d82a64d0 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -783,8 +783,8 @@ static int iwch_dealloc_mw(struct ib_mw *mw)
mmid = (mw->rkey) >> 8;
cxio_deallocate_window(&rhp->rdev, mhp->attr.stag);
remove_handle(rhp, &rhp->mmidr, mmid);
- kfree(mhp);
PDBG("%s ib_mw %p mmid 0x%x ptr %p\n", __func__, mw, mmid, mhp);
+ kfree(mhp);
return 0;
}
diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h
index 3942efbbfb5..a315a2914d7 100644
--- a/drivers/isdn/hardware/eicon/divacapi.h
+++ b/drivers/isdn/hardware/eicon/divacapi.h
@@ -422,11 +422,11 @@ struct _DIVA_CAPI_ADAPTER {
#define LAPD 6 /* lapd (Q.921) */
#define X25_L2 7 /* x.25 layer-2 */
#define V120_L2 8 /* V.120 layer-2 protocol */
-#define V42_IN 9 /* V.42 layer-2 protocol, incomming */
+#define V42_IN 9 /* V.42 layer-2 protocol, incoming */
#define V42 10 /* V.42 layer-2 protocol */
#define MDM_ATP 11 /* AT Parser built in the L2 */
#define X75_V42BIS 12 /* ISO7776 (X.75 SLP) modified to support V.42 bis compression */
-#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */
+#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */
#define RTPL2 14 /* RTP layer-2 protocol */
#define V120_V42BIS 15 /* V.120 layer-2 protocol supporting V.42 bis compression */
@@ -1125,7 +1125,7 @@ extern word li_total_channels;
| Direction | word | Enable compression/decompression for |
| | | 0: All direction |
| | | 1: disable outgoing data |
- | | | 2: disable incomming data |
+ | | | 2: disable incoming data |
| | | 3: disable both direction (default) |
+---------------------+------+-----------------------------------------+
| Number of code | word | Parameter P1 of V.42bis in accordance |
diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h
index 889dc984bbc..329c0c26abf 100644
--- a/drivers/isdn/hardware/eicon/pc.h
+++ b/drivers/isdn/hardware/eicon/pc.h
@@ -419,11 +419,11 @@ struct dual
#define LAPD 6 /* lapd (Q.921) */
#define X25_L2 7 /* x.25 layer-2 */
#define V120_L2 8 /* V.120 layer-2 protocol */
-#define V42_IN 9 /* V.42 layer-2 protocol, incomming */
+#define V42_IN 9 /* V.42 layer-2 protocol, incoming */
#define V42 10 /* V.42 layer-2 protocol */
#define MDM_ATP 11 /* AT Parser built in the L2 */
#define X75_V42BIS 12 /* x.75 with V.42bis */
-#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */
+#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */
#define RTPL2 14 /* RTP layer-2 protocol */
#define V120_V42BIS 15 /* V.120 asynchronous mode supporting V.42bis compression */
#define LISTENER 27 /* Layer 2 to listen line */
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index f8e405c383a..2c0d2c2bf94 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -689,7 +689,7 @@ l1oip_socket_thread(void *data)
hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip);
hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport);
- /* bind to incomming port */
+ /* bind to incoming port */
if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local,
sizeof(hc->sin_local))) {
printk(KERN_ERR "%s: Failed to bind socket to port %d.\n",
diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
index 1abdc7d9c74..4a574f3cfb2 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -345,7 +345,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = {
/*
* This is a generic configuration which is valid for most
* prp input-output format combinations.
- * We set the incomming and outgoing pixelformat to a
+ * We set the incoming and outgoing pixelformat to a
* 16 Bit wide format and adjust the bytesperline
* accordingly. With this configuration the inputdata
* will not be changed by the emma and could be any type
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c4daee1b728..e81a747ea8c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8843,7 +8843,7 @@ static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
(!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
(val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
} else {
- /* Prevent incomming interrupts in IGU */
+ /* Prevent incoming interrupts in IGU */
val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION,
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index b6025c305e1..cd345b8969b 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -12,7 +12,6 @@
*/
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index e3c3d122979..b2cca58de91 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -64,7 +64,7 @@ static const char mlx4_en_version[] =
/* Enable RSS UDP traffic */
MLX4_EN_PARM_INT(udp_rss, 1,
- "Enable RSS for incomming UDP traffic or disabled (0)");
+ "Enable RSS for incoming UDP traffic or disabled (0)");
/* Priority pausing */
MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 5d5fd06c4b4..28a6d483836 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -1150,7 +1150,7 @@ static int qlcnic_check_npar_opertional(struct qlcnic_adapter *adapter)
}
if (!npar_opt_timeo) {
dev_err(&adapter->pdev->dev,
- "Waiting for NPAR state to opertional timeout\n");
+ "Waiting for NPAR state to operational timeout\n");
return -EIO;
}
return 0;
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 84872043b5c..9cea451a608 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -993,7 +993,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
/* Enable Interuupt */
self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
- /* Be ready for incomming frames */
+ /* Be ready for incoming frames */
ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete
}
/* Go to SIR Speed */
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 0125524c08c..04da786c84d 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -429,7 +429,7 @@ static u64 __of_translate_address(struct device_node *dev,
goto bail;
bus = of_match_bus(parent);
- /* Cound address cells & copy address locally */
+ /* Count address cells & copy address locally */
bus->count_cells(dev, &na, &ns);
if (!OF_CHECK_COUNTS(na, ns)) {
printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index b80891b4381..e0a6514ab46 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -436,6 +436,7 @@ EXPORT_SYMBOL(of_platform_bus_probe);
* of_platform_populate() - Populate platform_devices from device tree data
* @root: parent of the first level to probe or NULL for the root of the tree
* @matches: match table, NULL to use the default
+ * @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent to hook devices from, NULL for toplevel
*
* Similar to of_platform_bus_probe(), this function walks the device tree
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 430a9ac5609..065704c605d 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -369,12 +369,12 @@ static int do_validate_mem(struct pcmcia_socket *s,
}
}
- free_region(res2);
- free_region(res1);
-
dev_dbg(&s->dev, "cs: memory probe 0x%06lx-0x%06lx: %p %p %u %u %u",
base, base+size-1, res1, res2, ret, info1, info2);
+ free_region(res2);
+ free_region(res1);
+
if ((ret) || (info1 != info2) || (info1 == 0))
return -EINVAL;
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index f1e323924f1..d85446021dd 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -839,7 +839,7 @@ static void rpmsg_recv_done(struct virtqueue *rvq)
/* farewell, ept, we don't need you anymore */
kref_put(&ept->refcount, __ept_release);
} else
- dev_warn(dev, "msg received with no recepient\n");
+ dev_warn(dev, "msg received with no recipient\n");
/* publish the real size of the buffer */
sg_init_one(&sg, msg, RPMSG_BUF_SIZE);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d56b2534f3e..db95c547c09 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -883,7 +883,7 @@ config SCSI_IBMVSCSI
This is the IBM POWER Virtual SCSI Client
To compile this driver as a module, choose M here: the
- module will be called ibmvscsic.
+ module will be called ibmvscsi.
config SCSI_IBMVSCSIS
tristate "IBM Virtual SCSI Server support"
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index 76ead8dac26..f240464effd 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -224,7 +224,7 @@ enum binder_driver_return_protocol {
BR_SPAWN_LOOPER = _IO('r', 13),
/*
* No parameters. The driver has determined that a process has no
- * threads waiting to service incomming transactions. When a process
+ * threads waiting to service incoming transactions. When a process
* receives this command, it must spawn a new service thread and
* register it via bcENTER_LOOPER.
*/
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 9a2ec251ae4..c3a90e7012a 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -72,7 +72,7 @@ int pow_receive_group = 15;
module_param(pow_receive_group, int, 0444);
MODULE_PARM_DESC(pow_receive_group, "\n"
"\tPOW group to receive packets from. All ethernet hardware\n"
- "\twill be configured to send incomming packets to this POW\n"
+ "\twill be configured to send incoming packets to this POW\n"
"\tgroup. Also any other software can submit packets to this\n"
"\tgroup for the kernel to process.");
diff --git a/drivers/target/sbp/sbp_target.c b/drivers/target/sbp/sbp_target.c
index 2e8d06f198a..6917a9e938e 100644
--- a/drivers/target/sbp/sbp_target.c
+++ b/drivers/target/sbp/sbp_target.c
@@ -1719,7 +1719,7 @@ static struct se_node_acl *sbp_alloc_fabric_acl(struct se_portal_group *se_tpg)
nacl = kzalloc(sizeof(struct sbp_nacl), GFP_KERNEL);
if (!nacl) {
- pr_err("Unable to alocate struct sbp_nacl\n");
+ pr_err("Unable to allocate struct sbp_nacl\n");
return NULL;
}
diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
index b4ba0670dc5..97a511f4185 100644
--- a/drivers/tty/ipwireless/hardware.c
+++ b/drivers/tty/ipwireless/hardware.c
@@ -646,7 +646,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
(*assem) = pool_allocate(hw, *assem, length);
if (!(*assem)) {
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
- ": no memory for incomming data packet, dropped!\n");
+ ": no memory for incoming data packet, dropped!\n");
return;
}
(*assem)->protocol = protocol;
@@ -670,7 +670,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
packet = pool_allocate(hw, NULL, length);
if (!packet) {
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
- ": no memory for incomming ctrl packet, dropped!\n");
+ ": no memory for incoming ctrl packet, dropped!\n");
return;
}
packet->protocol = protocol;
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 5a3327b8f90..1e59ed575cc 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -6522,7 +6522,7 @@ reada:
}
/*
- * hepler to process tree block while walking down the tree.
+ * helper to process tree block while walking down the tree.
*
* when wc->stage == UPDATE_BACKREF, this function updates
* back refs for pointers in the block.
@@ -6597,7 +6597,7 @@ static noinline int walk_down_proc(struct btrfs_trans_handle *trans,
}
/*
- * hepler to process tree block pointer.
+ * helper to process tree block pointer.
*
* when wc->stage == DROP_REFERENCE, this function checks
* reference count of the block pointed to. if the block
@@ -6735,7 +6735,7 @@ skip:
}
/*
- * hepler to process tree block while walking up the tree.
+ * helper to process tree block while walking up the tree.
*
* when wc->stage == DROP_REFERENCE, this function drops
* reference count on the block.
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 300e09ac365..17c306bf177 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -3472,7 +3472,7 @@ out:
}
/*
- * hepler to find all tree blocks that reference a given data extent
+ * helper to find all tree blocks that reference a given data extent
*/
static noinline_for_stack
int add_data_references(struct reloc_control *rc,
@@ -3566,7 +3566,7 @@ int add_data_references(struct reloc_control *rc,
}
/*
- * hepler to find next unprocessed extent
+ * helper to find next unprocessed extent
*/
static noinline_for_stack
int find_next_extent(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index fc03aa60b68..4c0067c4f76 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -112,7 +112,6 @@ loop:
* to redo the trans_no_join checks above
*/
kmem_cache_free(btrfs_transaction_cachep, cur_trans);
- cur_trans = fs_info->running_transaction;
goto loop;
} else if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) {
spin_unlock(&fs_info->trans_lock);
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 51dc2fb6e85..9f6c4c45d21 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -76,7 +76,7 @@ symlink_hash(unsigned int link_len, const char *link_str, u8 *md5_hash)
}
rc = crypto_shash_update(&sdescmd5->shash, link_str, link_len);
if (rc) {
- cERROR(1, "%s: Could not update iwth link_str", __func__);
+ cERROR(1, "%s: Could not update with link_str", __func__);
goto symlink_hash_err;
}
rc = crypto_shash_final(&sdescmd5->shash, md5_hash);
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 5dc06c83710..9edeeb0ea97 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -147,7 +147,7 @@ static void hpfs_write_inode_ea(struct inode *i, struct fnode *fnode)
/*if (le32_to_cpu(fnode->acl_size_l) || le16_to_cpu(fnode->acl_size_s)) {
Some unknown structures like ACL may be in fnode,
we'd better not overwrite them
- hpfs_error(i->i_sb, "fnode %08x has some unknown HPFS386 stuctures", i->i_ino);
+ hpfs_error(i->i_sb, "fnode %08x has some unknown HPFS386 structures", i->i_ino);
} else*/ if (hpfs_sb(i->i_sb)->sb_eas >= 2) {
__le32 ea;
if (!uid_eq(i->i_uid, hpfs_sb(i->i_sb)->sb_uid) || hpfs_inode->i_ea_uid) {
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 1a543be09c7..060ba638bec 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -154,7 +154,7 @@ static int jfs_statfs(struct dentry *dentry, struct kstatfs *buf)
/*
* If we really return the number of allocated & free inodes, some
* applications will fail because they won't see enough free inodes.
- * We'll try to calculate some guess as to how may inodes we can
+ * We'll try to calculate some guess as to how many inodes we can
* really allocate
*
* buf->f_files = atomic_read(&imap->im_numinos);
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index f0edbd84f7b..0d2bf566e39 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -870,7 +870,7 @@ int o2net_register_handler(u32 msg_type, u32 key, u32 max_len,
/* we've had some trouble with handlers seemingly vanishing. */
mlog_bug_on_msg(o2net_handler_tree_lookup(msg_type, key, &p,
&parent) == NULL,
- "couldn't find handler we *just* registerd "
+ "couldn't find handler we *just* registered "
"for type %u key %08x\n", msg_type, key);
}
write_unlock(&o2net_handler_lock);
diff --git a/fs/qnx6/inode.c b/fs/qnx6/inode.c
index b6addf56048..57199a52a35 100644
--- a/fs/qnx6/inode.c
+++ b/fs/qnx6/inode.c
@@ -285,7 +285,7 @@ static struct buffer_head *qnx6_check_first_superblock(struct super_block *s,
if (fs32_to_cpu(sbi, sb->sb_magic) == QNX6_SUPER_MAGIC) {
/* we got a big endian fs */
QNX6DEBUG((KERN_INFO "qnx6: fs got different"
- " endianess.\n"));
+ " endianness.\n"));
return bh;
} else
sbi->s_bytesex = BYTESEX_LE;
diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
index bd2e52ccc4f..3d754a394e9 100644
--- a/include/linux/dma-buf.h
+++ b/include/linux/dma-buf.h
@@ -53,7 +53,7 @@ struct dma_buf_attachment;
* @begin_cpu_access: [optional] called before cpu access to invalidate cpu
* caches and allocate backing storage (if not yet done)
* respectively pin the objet into memory.
- * @end_cpu_access: [optional] called after cpu access to flush cashes.
+ * @end_cpu_access: [optional] called after cpu access to flush caches.
* @kmap_atomic: maps a page from the buffer into kernel address
* space, users may not block until the subsequent unmap call.
* This callback must not sleep.
diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h
index b9df9ed1adc..d5dd4657c8d 100644
--- a/include/linux/percpu_counter.h
+++ b/include/linux/percpu_counter.h
@@ -83,7 +83,7 @@ static inline int percpu_counter_initialized(struct percpu_counter *fbc)
return (fbc->counters != NULL);
}
-#else
+#else /* !CONFIG_SMP */
struct percpu_counter {
s64 count;
diff --git a/include/net/irda/irlmp.h b/include/net/irda/irlmp.h
index 591f78631f1..f74109144d3 100644
--- a/include/net/irda/irlmp.h
+++ b/include/net/irda/irlmp.h
@@ -278,7 +278,7 @@ static inline int irlmp_lap_tx_queue_full(struct lsap_cb *self)
}
/* After doing a irlmp_dup(), this get one of the two socket back into
- * a state where it's waiting incomming connections.
+ * a state where it's waiting incoming connections.
* Note : this can be used *only* if the socket is not yet connected
* (i.e. NO irlmp_connect_response() done on this socket).
* - Jean II */
diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h
index af4b87721d1..98682d4bae8 100644
--- a/include/net/irda/irttp.h
+++ b/include/net/irda/irttp.h
@@ -185,7 +185,7 @@ static inline __u32 irttp_get_max_seg_size(struct tsap_cb *self)
}
/* After doing a irttp_dup(), this get one of the two socket back into
- * a state where it's waiting incomming connections.
+ * a state where it's waiting incoming connections.
* Note : this can be used *only* if the socket is not yet connected
* (i.e. NO irttp_connect_response() done on this socket).
* - Jean II */
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 22e77a78654..60793e7b768 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1929,7 +1929,7 @@ int hci_recv_frame(struct sk_buff *skb)
return -ENXIO;
}
- /* Incomming skb */
+ /* Incoming skb */
bt_cb(skb)->incoming = 1;
/* Time stamp */
diff --git a/net/caif/cfcnfg.c b/net/caif/cfcnfg.c
index ba9cfd47778..f1dbddb95a6 100644
--- a/net/caif/cfcnfg.c
+++ b/net/caif/cfcnfg.c
@@ -402,7 +402,7 @@ cfcnfg_linkup_rsp(struct cflayer *layer, u8 channel_id, enum cfctrl_srv serv,
phyinfo = cfcnfg_get_phyinfo_rcu(cnfg, phyid);
if (phyinfo == NULL) {
- pr_err("ERROR: Link Layer Device dissapeared"
+ pr_err("ERROR: Link Layer Device disappeared"
"while connecting\n");
goto unlock;
}
diff --git a/net/irda/timer.c b/net/irda/timer.c
index 1d552b3946f..0c4c115a5ca 100644
--- a/net/irda/timer.c
+++ b/net/irda/timer.c
@@ -57,7 +57,7 @@ void irlap_start_query_timer(struct irlap_cb *self, int S, int s)
* Basically, we multiply the number of remaining slots by our
* slot time, plus add some extra time to properly receive the last
* discovery packet (which is longer due to extra discovery info),
- * to avoid messing with for incomming connections requests and
+ * to avoid messing with for incoming connections requests and
* to accommodate devices that perform discovery slower than us.
* Jean II */
timeout = ((sysctl_slot_timeout * HZ / 1000) * (S - s)
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index a193f3bc814..cf579e71cff 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1201,7 +1201,7 @@ nodata:
* specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT)
* This is a helper function to allocate an error chunk for
* for those invalid parameter codes in which we may not want
- * to report all the errors, if the incomming chunk is large
+ * to report all the errors, if the incoming chunk is large
*/
static inline struct sctp_chunk *sctp_make_op_error_fixed(
const struct sctp_association *asoc,
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index cb1f50cf12e..7f6425e24ce 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -409,7 +409,7 @@ static void traps(void)
int *p = (int *)test;
if (*p != INT_CONF) {
- fprintf(stderr, "fixdep: sizeof(int) != 4 or wrong endianess? %#x\n",
+ fprintf(stderr, "fixdep: sizeof(int) != 4 or wrong endianness? %#x\n",
*p);
exit(2);
}
diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c
index 6c12ac206ee..a153b168129 100644
--- a/sound/soc/codecs/ab8500-codec.c
+++ b/sound/soc/codecs/ab8500-codec.c
@@ -2147,7 +2147,7 @@ static int ab8500_codec_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
status = ab8500_codec_set_dai_clock_gate(codec, fmt);
if (status) {
dev_err(dai->codec->dev,
- "%s: ERRROR: Failed to set clock gate (%d).\n",
+ "%s: ERROR: Failed to set clock gate (%d).\n",
__func__, status);
return status;
}
diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index ea58b73e86b..b47c252ef90 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -113,15 +113,15 @@ SOC_ENUM("Equaliser Function", wm8974_enum[3]),
SOC_ENUM("EQ1 Cut Off", wm8974_enum[4]),
SOC_SINGLE_TLV("EQ1 Volume", WM8974_EQ1, 0, 24, 1, eq_tlv),
-SOC_ENUM("Equaliser EQ2 Bandwith", wm8974_enum[5]),
+SOC_ENUM("Equaliser EQ2 Bandwidth", wm8974_enum[5]),
SOC_ENUM("EQ2 Cut Off", wm8974_enum[6]),
SOC_SINGLE_TLV("EQ2 Volume", WM8974_EQ2, 0, 24, 1, eq_tlv),
-SOC_ENUM("Equaliser EQ3 Bandwith", wm8974_enum[7]),
+SOC_ENUM("Equaliser EQ3 Bandwidth", wm8974_enum[7]),
SOC_ENUM("EQ3 Cut Off", wm8974_enum[8]),
SOC_SINGLE_TLV("EQ3 Volume", WM8974_EQ3, 0, 24, 1, eq_tlv),
-SOC_ENUM("Equaliser EQ4 Bandwith", wm8974_enum[9]),
+SOC_ENUM("Equaliser EQ4 Bandwidth", wm8974_enum[9]),
SOC_ENUM("EQ4 Cut Off", wm8974_enum[10]),
SOC_SINGLE_TLV("EQ4 Volume", WM8974_EQ4, 0, 24, 1, eq_tlv),
diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c
index f347af3a67c..029f31c8e70 100644
--- a/sound/soc/codecs/wm8978.c
+++ b/sound/soc/codecs/wm8978.c
@@ -166,15 +166,15 @@ static const struct snd_kcontrol_new wm8978_snd_controls[] = {
SOC_ENUM("EQ1 Cut Off", eq1),
SOC_SINGLE_TLV("EQ1 Volume", WM8978_EQ1, 0, 24, 1, eq_tlv),
- SOC_ENUM("Equaliser EQ2 Bandwith", eq2bw),
+ SOC_ENUM("Equaliser EQ2 Bandwidth", eq2bw),
SOC_ENUM("EQ2 Cut Off", eq2),
SOC_SINGLE_TLV("EQ2 Volume", WM8978_EQ2, 0, 24, 1, eq_tlv),
- SOC_ENUM("Equaliser EQ3 Bandwith", eq3bw),
+ SOC_ENUM("Equaliser EQ3 Bandwidth", eq3bw),
SOC_ENUM("EQ3 Cut Off", eq3),
SOC_SINGLE_TLV("EQ3 Volume", WM8978_EQ3, 0, 24, 1, eq_tlv),
- SOC_ENUM("Equaliser EQ4 Bandwith", eq4bw),
+ SOC_ENUM("Equaliser EQ4 Bandwidth", eq4bw),
SOC_ENUM("EQ4 Cut Off", eq4),
SOC_SINGLE_TLV("EQ4 Volume", WM8978_EQ4, 0, 24, 1, eq_tlv),
diff --git a/sound/soc/codecs/wm8983.c b/sound/soc/codecs/wm8983.c
index c9c707b8698..aa41ba0dfff 100644
--- a/sound/soc/codecs/wm8983.c
+++ b/sound/soc/codecs/wm8983.c
@@ -353,13 +353,13 @@ static const struct snd_kcontrol_new wm8983_snd_controls[] = {
SOC_ENUM_EXT("Equalizer Function", eqmode, eqmode_get, eqmode_put),
SOC_ENUM("EQ1 Cutoff", eq1_cutoff),
SOC_SINGLE_TLV("EQ1 Volume", WM8983_EQ1_LOW_SHELF, 0, 24, 1, eq_tlv),
- SOC_ENUM("EQ2 Bandwith", eq2_bw),
+ SOC_ENUM("EQ2 Bandwidth", eq2_bw),
SOC_ENUM("EQ2 Cutoff", eq2_cutoff),
SOC_SINGLE_TLV("EQ2 Volume", WM8983_EQ2_PEAK_1, 0, 24, 1, eq_tlv),
- SOC_ENUM("EQ3 Bandwith", eq3_bw),
+ SOC_ENUM("EQ3 Bandwidth", eq3_bw),
SOC_ENUM("EQ3 Cutoff", eq3_cutoff),
SOC_SINGLE_TLV("EQ3 Volume", WM8983_EQ3_PEAK_2, 0, 24, 1, eq_tlv),
- SOC_ENUM("EQ4 Bandwith", eq4_bw),
+ SOC_ENUM("EQ4 Bandwidth", eq4_bw),
SOC_ENUM("EQ4 Cutoff", eq4_cutoff),
SOC_SINGLE_TLV("EQ4 Volume", WM8983_EQ4_PEAK_3, 0, 24, 1, eq_tlv),
SOC_ENUM("EQ5 Cutoff", eq5_cutoff),
diff --git a/sound/soc/codecs/wm8985.c b/sound/soc/codecs/wm8985.c
index dd6ce3bc01c..18f2babe109 100644
--- a/sound/soc/codecs/wm8985.c
+++ b/sound/soc/codecs/wm8985.c
@@ -371,13 +371,13 @@ static const struct snd_kcontrol_new wm8985_snd_controls[] = {
SOC_ENUM_EXT("Equalizer Function", eqmode, eqmode_get, eqmode_put),
SOC_ENUM("EQ1 Cutoff", eq1_cutoff),
SOC_SINGLE_TLV("EQ1 Volume", WM8985_EQ1_LOW_SHELF, 0, 24, 1, eq_tlv),
- SOC_ENUM("EQ2 Bandwith", eq2_bw),
+ SOC_ENUM("EQ2 Bandwidth", eq2_bw),
SOC_ENUM("EQ2 Cutoff", eq2_cutoff),
SOC_SINGLE_TLV("EQ2 Volume", WM8985_EQ2_PEAK_1, 0, 24, 1, eq_tlv),
- SOC_ENUM("EQ3 Bandwith", eq3_bw),
+ SOC_ENUM("EQ3 Bandwidth", eq3_bw),
SOC_ENUM("EQ3 Cutoff", eq3_cutoff),
SOC_SINGLE_TLV("EQ3 Volume", WM8985_EQ3_PEAK_2, 0, 24, 1, eq_tlv),
- SOC_ENUM("EQ4 Bandwith", eq4_bw),
+ SOC_ENUM("EQ4 Bandwidth", eq4_bw),
SOC_ENUM("EQ4 Cutoff", eq4_cutoff),
SOC_SINGLE_TLV("EQ4 Volume", WM8985_EQ4_PEAK_3, 0, 24, 1, eq_tlv),
SOC_ENUM("EQ5 Cutoff", eq5_cutoff),