aboutsummaryrefslogtreecommitdiff
path: root/arch/arc
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-09 14:36:27 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-09 14:36:27 -0700
commite30f4192456971623b40c97a027346b69457ef69 (patch)
tree11a9a7ccfdc18f5e448661f65b8bbf2a1007b79a /arch/arc
parentb32729b1eeae7ef8f5709923b36b5a0906d213df (diff)
parenteacd0e950dc2100af54f2a94ae29105bf48ab921 (diff)
Merge tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC port updates from Vineet Gupta: "Support for two new platforms based on ARC700: - Abilis TB10x SoC [Chritisian/Pierrick] - Simulator only System-C Model [Mischa] ARC specific MM improvements: - Avoid full TLB flush (ASID increment) on munmap (even single page) - VIPT Cache Flushing improvements + Delayed dcache flush for non-aliasing dcache (big performance boost) + icache flush aliasing agnostic (no need to kill all possible aliases) Others: - Avoid needless rebuild of DTB files for every kernel build - Remove builtin cmdline as that is already provided by DeviceTree/bootargs - Fixing unaligned access emulation corner case - checkpatch fixes [Sachin] - Various fixlets [Noam] - Minor build failures/cleanups" * tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (35 commits) ARC: [mm] Lazy D-cache flush (non aliasing VIPT) ARC: [mm] micro-optimize page size icache invalidate ARC: [mm] remove the pessimistic all-alias-invalidate icache helpers ARC: [mm] consolidate icache/dcache sync code ARC: [mm] optimise icache flush for kernel mappings ARC: [mm] optimise icache flush for user mappings ARC: [mm] optimize needless full mm TLB flush on munmap ARC: Add support for nSIM OSCI System C model ARC: [TB10x] Adapt device tree to new compatible string ARC: [TB10x] Add support for TB10x platform ARC: [TB10x] Device tree of TB100 and TB101 Development Kits ARC: Prepare interrupt code for external controllers ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchy ARC: [cmdline] Don't overwrite u-boot provided bootargs ARC: [cmdline] Remove CONFIG_CMDLINE ARC: [plat-arcfpga] defconfig update ARC: unaligned access emulation broken if callee-reg dest of LD/ST ARC: unaligned access emulation error handling consolidation ARC: Debug/crash-printing Improvements ARC: fix typo with clock speed ...
Diffstat (limited to 'arch/arc')
-rw-r--r--arch/arc/Kconfig31
-rw-r--r--arch/arc/Makefile15
-rw-r--r--arch/arc/boot/Makefile19
-rw-r--r--arch/arc/boot/dts/Makefile4
-rw-r--r--arch/arc/boot/dts/abilis_tb100.dtsi340
-rw-r--r--arch/arc/boot/dts/abilis_tb100_dvk.dts127
-rw-r--r--arch/arc/boot/dts/abilis_tb101.dtsi349
-rw-r--r--arch/arc/boot/dts/abilis_tb101_dvk.dts127
-rw-r--r--arch/arc/boot/dts/abilis_tb10x.dtsi247
-rw-r--r--arch/arc/boot/dts/nsimosci.dts77
-rw-r--r--arch/arc/configs/fpga_defconfig3
-rw-r--r--arch/arc/configs/nsimosci_defconfig75
-rw-r--r--arch/arc/configs/tb10x_defconfig117
-rw-r--r--arch/arc/include/asm/cacheflush.h16
-rw-r--r--arch/arc/include/asm/irq.h3
-rw-r--r--arch/arc/include/asm/serial.h10
-rw-r--r--arch/arc/include/asm/tlb.h16
-rw-r--r--arch/arc/kernel/asm-offsets.c2
-rw-r--r--arch/arc/kernel/clk.c2
-rw-r--r--arch/arc/kernel/disasm.c2
-rw-r--r--arch/arc/kernel/entry.S8
-rw-r--r--arch/arc/kernel/irq.c25
-rw-r--r--arch/arc/kernel/kprobes.c1
-rw-r--r--arch/arc/kernel/module.c4
-rw-r--r--arch/arc/kernel/setup.c36
-rw-r--r--arch/arc/kernel/time.c1
-rw-r--r--arch/arc/kernel/traps.c24
-rw-r--r--arch/arc/kernel/troubleshoot.c50
-rw-r--r--arch/arc/mm/cache_arc700.c269
-rw-r--r--arch/arc/mm/extable.c4
-rw-r--r--arch/arc/mm/fault.c1
-rw-r--r--arch/arc/mm/init.c3
-rw-r--r--arch/arc/mm/ioremap.c2
-rw-r--r--arch/arc/mm/tlb.c32
-rw-r--r--arch/arc/plat-arcfpga/platform.c12
-rw-r--r--arch/arc/plat-tb10x/Kconfig36
-rw-r--r--arch/arc/plat-tb10x/Makefile21
-rw-r--r--arch/arc/plat-tb10x/tb10x.c71
38 files changed, 1840 insertions, 342 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index e6f4eca09ee..491ae7923b1 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -16,8 +16,6 @@ config ARC
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
- select GENERIC_KERNEL_EXECVE
- select GENERIC_KERNEL_THREAD
select GENERIC_PENDING_IRQ if SMP
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
@@ -61,9 +59,6 @@ config GENERIC_CALIBRATE_DELAY
config GENERIC_HWEIGHT
def_bool y
-config BINFMT_ELF
- def_bool y
-
config STACKTRACE_SUPPORT
def_bool y
select STACKTRACE
@@ -82,6 +77,7 @@ menu "ARC Architecture Configuration"
menu "ARC Platform/SoC/Board"
source "arch/arc/plat-arcfpga/Kconfig"
+source "arch/arc/plat-tb10x/Kconfig"
#New platform adds here
endmenu
@@ -134,9 +130,6 @@ if SMP
config ARC_HAS_COH_CACHES
def_bool n
-config ARC_HAS_COH_LLSC
- def_bool n
-
config ARC_HAS_COH_RTSC
def_bool n
@@ -304,6 +297,9 @@ config ARC_FPU_SAVE_RESTORE
based on actual usage of FPU by a task. Thus our implemn does
this for all tasks in system.
+config ARC_CANT_LLSC
+ def_bool n
+
menuconfig ARC_CPU_REL_4_10
bool "Enable support for Rel 4.10 features"
default n
@@ -314,9 +310,7 @@ menuconfig ARC_CPU_REL_4_10
config ARC_HAS_LLSC
bool "Insn: LLOCK/SCOND (efficient atomic ops)"
default y
- depends on ARC_CPU_770
- # if SMP, enable LLSC ONLY if ARC implementation has coherent atomics
- depends on !SMP || ARC_HAS_COH_LLSC
+ depends on ARC_CPU_770 && !ARC_CANT_LLSC
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"
@@ -415,13 +409,6 @@ config ARC_DBG_TLB_MISS_COUNT
Counts number of I and D TLB Misses and exports them via Debugfs
The counters can be cleared via Debugfs as well
-config CMDLINE
- string "Kernel command line to built-in"
- default "print-fatal-signals=1"
- help
- The default command line which will be appended to the optional
- u-boot provided command line (see below)
-
config CMDLINE_UBOOT
bool "Support U-boot kernel command line passing"
default n
@@ -430,8 +417,8 @@ config CMDLINE_UBOOT
command line from the U-boot environment to the Linux kernel then
switch this option on.
ARC U-boot will setup the cmdline in RAM/flash and set r2 to point
- to it. kernel startup code will copy the string into cmdline buffer
- and also append CONFIG_CMDLINE.
+ to it. kernel startup code will append this to DeviceTree
+ /bootargs provided cmdline args.
config ARC_BUILTIN_DTB_NAME
string "Built in DTB"
@@ -441,6 +428,10 @@ config ARC_BUILTIN_DTB_NAME
source "kernel/Kconfig.preempt"
+menu "Executable file formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
endmenu # "ARC Architecture Configuration"
source "mm/Kconfig"
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 92379c7cbc1..183397fd289 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -8,6 +8,10 @@
UTS_MACHINE := arc
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE := arc-elf32-
+endif
+
KBUILD_DEFCONFIG := fpga_defconfig
cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__
@@ -87,20 +91,23 @@ core-y += arch/arc/
core-y += arch/arc/boot/dts/
core-$(CONFIG_ARC_PLAT_FPGA_LEGACY) += arch/arc/plat-arcfpga/
+core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/
drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/
libs-y += arch/arc/lib/ $(LIBGCC)
+boot := arch/arc/boot
+
#default target for make without any arguements.
-KBUILD_IMAGE := bootpImage
+KBUILD_IMAGE := bootpImage
all: $(KBUILD_IMAGE)
-boot := arch/arc/boot
-
bootpImage: vmlinux
-uImage: vmlinux
+boot_targets += uImage uImage.bin uImage.gz
+
+$(boot_targets): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
%.dtb %.dtb.S %.dtb.o: scripts
diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile
index 7d514c24e09..e597cb34c16 100644
--- a/arch/arc/boot/Makefile
+++ b/arch/arc/boot/Makefile
@@ -3,7 +3,6 @@ targets := vmlinux.bin vmlinux.bin.gz uImage
# uImage build relies on mkimage being availble on your host for ARC target
# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
# and make sure it's reacable from your PATH
-MKIMAGE := $(srctree)/scripts/mkuboot.sh
OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
@@ -12,7 +11,12 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \
UIMAGE_LOADADDR = $(CONFIG_LINUX_LINK_BASE)
UIMAGE_ENTRYADDR = $(LINUX_START_TEXT)
-UIMAGE_COMPRESSION = gzip
+
+suffix-y := bin
+suffix-$(CONFIG_KERNEL_GZIP) := gz
+
+targets += uImage uImage.bin uImage.gz
+extra-y += vmlinux.bin vmlinux.bin.gz
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
@@ -20,7 +24,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
-$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,uimage)
+$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,uimage,none)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,uimage,gzip)
-PHONY += FORCE
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+ @ln -sf $(notdir $<) $@
+ @echo ' Image $@ is ready'
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
index 5776835d583..faf240e29ec 100644
--- a/arch/arc/boot/dts/Makefile
+++ b/arch/arc/boot/dts/Makefile
@@ -8,6 +8,8 @@ endif
obj-y += $(builtindtb-y).dtb.o
targets += $(builtindtb-y).dtb
+.SECONDARY: $(obj)/$(builtindtb-y).dtb.S
+
dtbs: $(addprefix $(obj)/, $(builtindtb-y).dtb)
-clean-files := *.dtb
+clean-files := *.dtb *.dtb.S
diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi
new file mode 100644
index 00000000000..941ad118a7e
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb100.dtsi
@@ -0,0 +1,340 @@
+/*
+ * Abilis Systems TB100 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+/* interrupt specifiers
+ * --------------------
+ * 0: rising, 1: low, 2: high, 3: falling,
+ */
+
+/ {
+ clock-frequency = <500000000>; /* 500 MHZ */
+
+ soc100 {
+ bus-frequency = <166666666>;
+
+ pll0: oscillator {
+ clock-frequency = <1000000000>;
+ };
+ cpu_clk: clkdiv_cpu {
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+ ahb_clk: clkdiv_ahb {
+ clock-mult = <1>;
+ clock-div = <6>;
+ };
+
+ iomux: iomux@FF10601c {
+ /* Port 1 */
+ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
+ pingrp = "mis0_pins";
+ };
+ pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */
+ pingrp = "mis1_pins";
+ };
+ pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */
+ pingrp = "gpioa_pins";
+ };
+ pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */
+ pingrp = "mip1_pins";
+ };
+ /* Port 2 */
+ pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */
+ pingrp = "mis2_pins";
+ };
+ pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */
+ pingrp = "mis3_pins";
+ };
+ pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */
+ pingrp = "gpioc_pins";
+ };
+ pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */
+ pingrp = "mip3_pins";
+ };
+ /* Port 3 */
+ pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */
+ pingrp = "mis4_pins";
+ };
+ pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */
+ pingrp = "mis5_pins";
+ };
+ pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */
+ pingrp = "gpioe_pins";
+ };
+ pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */
+ pingrp = "mip5_pins";
+ };
+ /* Port 4 */
+ pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */
+ pingrp = "mis6_pins";
+ };
+ pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */
+ pingrp = "mis7_pins";
+ };
+ pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */
+ pingrp = "gpiog_pins";
+ };
+ pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */
+ pingrp = "mip7_pins";
+ };
+ /* Port 5 */
+ pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */
+ pingrp = "gpioj_pins";
+ };
+ pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */
+ pingrp = "gpiok_pins";
+ };
+ pctl_ciplus: pctl-ciplus { /* CI+ interface */
+ pingrp = "ciplus_pins";
+ };
+ pctl_mcard: pctl-mcard { /* M-Card interface */
+ pingrp = "mcard_pins";
+ };
+ /* Port 6 */
+ pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */
+ pingrp = "mop_pins";
+ };
+ pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+ pingrp = "mos0_pins";
+ };
+ pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+ pingrp = "mos1_pins";
+ };
+ pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+ pingrp = "mos2_pins";
+ };
+ pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+ pingrp = "mos3_pins";
+ };
+ /* Port 7 */
+ pctl_uart0: pctl-uart0 { /* UART 0 */
+ pingrp = "uart0_pins";
+ };
+ pctl_uart1: pctl-uart1 { /* UART 1 */
+ pingrp = "uart1_pins";
+ };
+ pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */
+ pingrp = "gpiol_pins";
+ };
+ pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */
+ pingrp = "gpiom_pins";
+ };
+ /* Port 8 */
+ pctl_spi3: pctl-spi3 {
+ pingrp = "spi3_pins";
+ };
+ /* Port 9 */
+ pctl_spi1: pctl-spi1 {
+ pingrp = "spi1_pins";
+ };
+ pctl_gpio_n: pctl-gpio-n {
+ pingrp = "gpion_pins";
+ };
+ /* Unmuxed GPIOs */
+ pctl_gpio_b: pctl-gpio-b {
+ pingrp = "gpiob_pins";
+ };
+ pctl_gpio_d: pctl-gpio-d {
+ pingrp = "gpiod_pins";
+ };
+ pctl_gpio_f: pctl-gpio-f {
+ pingrp = "gpiof_pins";
+ };
+ pctl_gpio_h: pctl-gpio-h {
+ pingrp = "gpioh_pins";
+ };
+ pctl_gpio_i: pctl-gpio-i {
+ pingrp = "gpioi_pins";
+ };
+ };
+
+ gpioa: gpio@FF140000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF140000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <0>;
+ gpio-pins = <&pctl_gpio_a>;
+ };
+ gpiob: gpio@FF141000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF141000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <3>;
+ gpio-pins = <&pctl_gpio_b>;
+ };
+ gpioc: gpio@FF142000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF142000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <5>;
+ gpio-pins = <&pctl_gpio_c>;
+ };
+ gpiod: gpio@FF143000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF143000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <8>;
+ gpio-pins = <&pctl_gpio_d>;
+ };
+ gpioe: gpio@FF144000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF144000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <10>;
+ gpio-pins = <&pctl_gpio_e>;
+ };
+ gpiof: gpio@FF145000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF145000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <13>;
+ gpio-pins = <&pctl_gpio_f>;
+ };
+ gpiog: gpio@FF146000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF146000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <15>;
+ gpio-pins = <&pctl_gpio_g>;
+ };
+ gpioh: gpio@FF147000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF147000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <18>;
+ gpio-pins = <&pctl_gpio_h>;
+ };
+ gpioi: gpio@FF148000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF148000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <20>;
+ gpio-pins = <&pctl_gpio_i>;
+ };
+ gpioj: gpio@FF149000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF149000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <32>;
+ gpio-pins = <&pctl_gpio_j>;
+ };
+ gpiok: gpio@FF14a000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF14A000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <64>;
+ gpio-pins = <&pctl_gpio_k>;
+ };
+ gpiol: gpio@FF14b000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF14B000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <86>;
+ gpio-pins = <&pctl_gpio_l>;
+ };
+ gpiom: gpio@FF14c000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF14C000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <90>;
+ gpio-pins = <&pctl_gpio_m>;
+ };
+ gpion: gpio@FF14d000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF14D000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <94>;
+ gpio-pins = <&pctl_gpio_n>;
+ };
+ };
+};
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
new file mode 100644
index 00000000000..c0fd3623c39
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -0,0 +1,127 @@
+/*
+ * Abilis Systems TB100 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb100.dtsi"
+
+/ {
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+ };
+
+ aliases { };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x08000000>; /* 128M */
+ };
+
+ soc100 {
+ uart@FF100000 {
+ pinctrl-names = "abilis,simple-default";
+ pinctrl-0 = <&pctl_uart0>;
+ };
+ ethernet@FE100000 {
+ phy-mode = "rgmii";
+ };
+
+ i2c0: i2c@FF120000 {
+ sda-hold-time = <432>;
+ };
+ i2c1: i2c@FF121000 {
+ sda-hold-time = <432>;
+ };
+ i2c2: i2c@FF122000 {
+ sda-hold-time = <432>;
+ };
+ i2c3: i2c@FF123000 {
+ sda-hold-time = <432>;
+ };
+ i2c4: i2c@FF124000 {
+ sda-hold-time = <432>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power {
+ label = "Power";
+ gpios = <&gpioi 0>;
+ linux,default-trigger = "default-on";
+ };
+ heartbeat {
+ label = "Heartbeat";
+ gpios = <&gpioi 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ label = "LED2";
+ gpios = <&gpioi 2>;
+ default-state = "off";
+ };
+ led3 {
+ label = "LED3";
+ gpios = <&gpioi 3>;
+ default-state = "off";
+ };
+ led4 {
+ label = "LED4";
+ gpios = <&gpioi 4>;
+ default-state = "off";
+ };
+ led5 {
+ label = "LED5";
+ gpios = <&gpioi 5>;
+ default-state = "off";
+ };
+ led6 {
+ label = "LED6";
+ gpios = <&gpioi 6>;
+ default-state = "off";
+ };
+ led7 {
+ label = "LED7";
+ gpios = <&gpioi 7>;
+ default-state = "off";
+ };
+ led8 {
+ label = "LED8";
+ gpios = <&gpioi 8>;
+ default-state = "off";
+ };
+ led9 {
+ label = "LED9";
+ gpios = <&gpioi 9>;
+ default-state = "off";
+ };
+ led10 {
+ label = "LED10";
+ gpios = <&gpioi 10>;
+ default-state = "off";
+ };
+ led11 {
+ label = "LED11";
+ gpios = <&gpioi 11>;
+ default-state = "off";
+ };
+ };
+ };
+};
diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi
new file mode 100644
index 00000000000..fd25c212049
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb101.dtsi
@@ -0,0 +1,349 @@
+/*
+ * Abilis Systems TB101 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+/* interrupt specifiers
+ * --------------------
+ * 0: rising, 1: low, 2: high, 3: falling,
+ */
+
+/ {
+ clock-frequency = <500000000>; /* 500 MHZ */
+
+ soc100 {
+ bus-frequency = <166666666>;
+
+ pll0: oscillator {
+ clock-frequency = <1000000000>;
+ };
+ cpu_clk: clkdiv_cpu {
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+ ahb_clk: clkdiv_ahb {
+ clock-mult = <1>;
+ clock-div = <6>;
+ };
+
+ iomux: iomux@FF10601c {
+ /* Port 1 */
+ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
+ pingrp = "mis0_pins";
+ };
+ pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */
+ pingrp = "mis1_pins";
+ };
+ pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */
+ pingrp = "gpioa_pins";
+ };
+ pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */
+ pingrp = "mip1_pins";
+ };
+ /* Port 2 */
+ pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */
+ pingrp = "mis2_pins";
+ };
+ pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */
+ pingrp = "mis3_pins";
+ };
+ pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */
+ pingrp = "gpioc_pins";
+ };
+ pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */
+ pingrp = "mip3_pins";
+ };
+ /* Port 3 */
+ pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */
+ pingrp = "mis4_pins";
+ };
+ pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */
+ pingrp = "mis5_pins";
+ };
+ pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */
+ pingrp = "gpioe_pins";
+ };
+ pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */
+ pingrp = "mip5_pins";
+ };
+ /* Port 4 */
+ pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */
+ pingrp = "mis6_pins";
+ };
+ pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */
+ pingrp = "mis7_pins";
+ };
+ pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */
+ pingrp = "gpiog_pins";
+ };
+ pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */
+ pingrp = "mip7_pins";
+ };
+ /* Port 5 */
+ pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */
+ pingrp = "gpioj_pins";
+ };
+ pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */
+ pingrp = "gpiok_pins";
+ };
+ pctl_ciplus: pctl-ciplus { /* CI+ interface */
+ pingrp = "ciplus_pins";
+ };
+ pctl_mcard: pctl-mcard { /* M-Card interface */
+ pingrp = "mcard_pins";
+ };
+ pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */
+ pingrp = "stc0_pins";
+ };
+ pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */
+ pingrp = "stc1_pins";
+ };
+ /* Port 6 */
+ pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */
+ pingrp = "mop_pins";
+ };
+ pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+ pingrp = "mos0_pins";
+ };
+ pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+ pingrp = "mos1_pins";
+ };
+ pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+ pingrp = "mos2_pins";
+ };
+ pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+ pingrp = "mos3_pins";
+ };
+ /* Port 7 */
+ pctl_uart0: pctl-uart0 { /* UART 0 */
+ pingrp = "uart0_pins";
+ };
+ pctl_uart1: pctl-uart1 { /* UART 1 */
+ pingrp = "uart1_pins";
+ };
+ pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */
+ pingrp = "gpiol_pins";
+ };
+ pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */
+ pingrp = "gpiom_pins";
+ };
+ /* Port 8 */
+ pctl_spi3: pctl-spi3 {
+ pingrp = "spi3_pins";
+ };
+ pctl_jtag: pctl-jtag {
+ pingrp = "jtag_pins";
+ };
+ /* Port 9 */
+ pctl_spi1: pctl-spi1 {
+ pingrp = "spi1_pins";
+ };
+ pctl_gpio_n: pctl-gpio-n {
+ pingrp = "gpion_pins";
+ };
+ /* Unmuxed GPIOs */
+ pctl_gpio_b: pctl-gpio-b {
+ pingrp = "gpiob_pins";
+ };
+ pctl_gpio_d: pctl-gpio-d {
+ pingrp = "gpiod_pins";
+ };
+ pctl_gpio_f: pctl-gpio-f {
+ pingrp = "gpiof_pins";
+ };
+ pctl_gpio_h: pctl-gpio-h {
+ pingrp = "gpioh_pins";
+ };
+ pctl_gpio_i: pctl-gpio-i {
+ pingrp = "gpioi_pins";
+ };
+ };
+
+ gpioa: gpio@FF140000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF140000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <0>;
+ gpio-pins = <&pctl_gpio_a>;
+ };
+ gpiob: gpio@FF141000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF141000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <3>;
+ gpio-pins = <&pctl_gpio_b>;
+ };
+ gpioc: gpio@FF142000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF142000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <5>;
+ gpio-pins = <&pctl_gpio_c>;
+ };
+ gpiod: gpio@FF143000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF143000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <8>;
+ gpio-pins = <&pctl_gpio_d>;
+ };
+ gpioe: gpio@FF144000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF144000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <10>;
+ gpio-pins = <&pctl_gpio_e>;
+ };
+ gpiof: gpio@FF145000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF145000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <13>;
+ gpio-pins = <&pctl_gpio_f>;
+ };
+ gpiog: gpio@FF146000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF146000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <15>;
+ gpio-pins = <&pctl_gpio_g>;
+ };
+ gpioh: gpio@FF147000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF147000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <18>;
+ gpio-pins = <&pctl_gpio_h>;
+ };
+ gpioi: gpio@FF148000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF148000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <20>;
+ gpio-pins = <&pctl_gpio_i>;
+ };
+ gpioj: gpio@FF149000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF149000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <32>;
+ gpio-pins = <&pctl_gpio_j>;
+ };
+ gpiok: gpio@FF14a000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF14A000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <64>;
+ gpio-pins = <&pctl_gpio_k>;
+ };
+ gpiol: gpio@FF14b000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF14B000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <86>;
+ gpio-pins = <&pctl_gpio_l>;
+ };
+ gpiom: gpio@FF14c000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF14C000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <90>;
+ gpio-pins = <&pctl_gpio_m>;
+ };
+ gpion: gpio@FF14d000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <27 1>;
+ reg = <0xFF14D000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-base = <94>;
+ gpio-pins = <&pctl_gpio_n>;
+ };
+ };
+};
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
new file mode 100644
index 00000000000..6f8c381f626
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -0,0 +1,127 @@
+/*
+ * Abilis Systems TB101 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb101.dtsi"
+
+/ {
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+ };
+
+ aliases { };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x08000000>; /* 128M */
+ };
+
+ soc100 {
+ uart@FF100000 {
+ pinctrl-names = "abilis,simple-default";
+ pinctrl-0 = <&pctl_uart0>;
+ };
+ ethernet@FE100000 {
+ phy-mode = "rgmii";
+ };
+
+ i2c0: i2c@FF120000 {
+ sda-hold-time = <432>;
+ };
+ i2c1: i2c@FF121000 {
+ sda-hold-time = <432>;
+ };
+ i2c2: i2c@FF122000 {
+ sda-hold-time = <432>;
+ };
+ i2c3: i2c@FF123000 {
+ sda-hold-time = <432>;
+ };
+ i2c4: i2c@FF124000 {
+ sda-hold-time = <432>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power {
+ label = "Power";
+ gpios = <&gpioi 0>;
+ linux,default-trigger = "default-on";
+ };
+ heartbeat {
+ label = "Heartbeat";
+ gpios = <&gpioi 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ label = "LED2";
+ gpios = <&gpioi 2>;
+ default-state = "off";
+ };
+ led3 {
+ label = "LED3";
+ gpios = <&gpioi 3>;
+ default-state = "off";
+ };
+ led4 {
+ label = "LED4";
+ gpios = <&gpioi 4>;
+ default-state = "off";
+ };
+ led5 {
+ label = "LED5";
+ gpios = <&gpioi 5>;
+ default-state = "off";
+ };
+ led6 {
+ label = "LED6";
+ gpios = <&gpioi 6>;
+ default-state = "off";
+ };
+ led7 {
+ label = "LED7";
+ gpios = <&gpioi 7>;
+ default-state = "off";
+ };
+ led8 {
+ label = "LED8";
+ gpios = <&gpioi 8>;
+ default-state = "off";
+ };
+ led9 {
+ label = "LED9";
+ gpios = <&gpioi 9>;
+ default-state = "off";
+ };
+ led10 {
+ label = "LED10";
+ gpios = <&gpioi 10>;
+ default-state = "off";
+ };
+ led11 {
+ label = "LED11";
+ gpios = <&gpioi 11>;
+ default-state = "off";
+ };
+ };
+ };
+};
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
new file mode 100644
index 00000000000..a6139fc5aaa
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -0,0 +1,247 @@
+/*
+ * Abilis Systems TB10X SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* interrupt specifiers
+ * --------------------
+ * 0: rising, 1: low, 2: high, 3: falling,
+ */
+
+/ {
+ compatible = "abilis,arc-tb10x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "snps,arc770d";
+ reg = <0>;
+ };
+ };
+
+ soc100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0xfe000000 0xfe000000 0x02000000
+ 0x000F0000 0x000F0000 0x00010000>;
+ compatible = "abilis,tb10x", "simple-bus";
+
+ pll0: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "pll0";
+ };
+ cpu_clk: clkdiv_cpu {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&pll0>;
+ clock-output-names = "cpu_clk";
+ };
+ ahb_clk: clkdiv_ahb {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&pll0>;
+ clock-output-names = "ahb_clk";
+ };
+
+ iomux: iomux@FF10601c {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "abilis,tb10x-iomux";
+ reg = <0xFF10601c 0x4>;
+ };
+
+ intc: interrupt-controller {
+ compatible = "snps,arc700-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ tb10x_ictl: pic@fe002000 {
+ compatible = "abilis,tb10x_ictl";
+ reg = <0xFE002000 0x20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29 30 31>;
+ };
+
+ uart@FF100000 {
+ compatible = "snps,dw-apb-uart",
+ "abilis,simple-pinctrl";
+ reg = <0xFF100000 0x100>;
+ clock-frequency = <166666666>;
+ interrupts = <25 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupt-parent = <&tb10x_ictl>;
+ };
+ ethernet@FE100000 {
+ compatible = "snps,dwmac-3.70a","snps,dwmac";
+ reg = <0xFE100000 0x1058>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <6 1>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_clk>;
+ clock-names = "stmmaceth";
+ };
+ dma@FE000000 {
+ compatible = "snps,dma-spear1340";
+ reg = <0xFE000000 0x400>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <14 1>;
+ dma-channels = <6>;
+ dma-requests = <0>;
+ dma-masters = <1>;
+ #dma-cells = <3>;
+ chan_allocation_order = <0>;
+ chan_priority = <1>;
+ block_size = <0x7ff>;
+ data_width = <2 0 0 0>;
+ clocks = <&ahb_clk>;
+ clock-names = "hclk";
+ };
+
+ i2c0: i2c@FF120000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xFF120000 0x1000>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <12 1>;
+ clocks = <&ahb_clk>;
+ };
+ i2c1: i2c@FF121000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xFF121000 0x1000>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <12 1>;
+ clocks = <&ahb_clk>;
+ };
+ i2c2: i2c@FF122000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xFF122000 0x1000>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <12 1>;
+ clocks = <&ahb_clk>;
+ };
+ i2c3: i2c@FF123000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xFF123000 0x1000>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <12 1>;
+ clocks = <&ahb_clk>;
+ };
+ i2c4: i2c@FF124000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xFF124000 0x1000>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <12 1>;
+ clocks = <&ahb_clk>;
+ };
+
+ spi0: spi@0xFE010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "abilis,tb100-spi";
+ num-cs = <1>;
+ reg = <0xFE010000 0x20>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <26 1>;
+ clocks = <&ahb_clk>;
+ };
+ spi1: spi@0xFE011000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "abilis,tb100-spi",
+ "abilis,simple-pinctrl";
+ num-cs = <2>;
+ reg = <0xFE011000 0x20>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <10 1>;
+ clocks = <&ahb_clk>;
+ };
+
+ tb10x_tsm: tb10x-tsm@ff316000 {
+ compatible = "abilis,tb100-tsm";
+ reg = <0xff316000 0x400>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <17 1>;
+ output-clkdiv = <4>;
+ global-packet-delay = <0x21>;
+ port-packet-delay = <0>;
+ };
+ tb10x_stream_proc: tb10x-stream-proc {
+ compatible = "abilis,tb100-streamproc";
+ reg = <0xfff00000 0x200>,
+ <0x000f0000 0x10000>,
+ <0xfff00200 0x105>,
+ <0xff10600c 0x1>,
+ <0xfe001018 0x1>;
+ reg-names = "mbox",
+ "sp_iccm",
+ "mbox_irq",
+ "cpuctrl",
+ "a6it_int_force";
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <20 1>, <19 1>;
+ interrupt-names = "cmd_irq", "event_irq";
+ };
+ tb10x_mdsc0: tb10x-mdscr@FF300000 {
+ compatible = "abilis,tb100-mdscr";
+ reg = <0xFF300000 0x7000>;
+ tb100-mdscr-manage-tsin;
+ };
+ tb10x_mscr0: tb10x-mdscr@FF307000 {
+ compatible = "abilis,tb100-mdscr";
+ reg = <0xFF307000 0x7000>;
+ };
+ tb10x_scr0: tb10x-mdscr@ff30e000 {
+ compatible = "abilis,tb100-mdscr";
+ reg = <0xFF30e000 0x4000>;
+ tb100-mdscr-manage-tsin;
+ };
+ tb10x_scr1: tb10x-mdscr@ff312000 {
+ compatible = "abilis,tb100-mdscr";
+ reg = <0xFF312000 0x4000>;
+ tb100-mdscr-manage-tsin;
+ };
+ tb10x_wfb: tb10x-wfb@ff319000 {
+ compatible = "abilis,tb100-wfb";
+ reg = <0xff319000 0x1000>;
+ interrupt-parent = <&tb10x_ictl>;
+ interrupts = <16 1>;
+ };
+ };
+};
diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts
new file mode 100644
index 00000000000..ea16d782af5
--- /dev/null
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "snps,nsimosci";
+ clock-frequency = <80000000>; /* 80 MHZ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ chosen {
+ bootargs = "console=tty0 consoleblank=0";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256M */
+ };
+
+ fpga {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* child and parent address space 1:1 mapped */
+ ranges;
+
+ intc: interrupt-controller {
+ compatible = "snps,arc700-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ uart0: serial@c0000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xc0000000 0x2000>;
+ interrupts = <11>;
+ #clock-frequency = <80000000>;
+ clock-frequency = <3686400>;
+ baud = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "okay";
+ };
+
+ pgu0: pgu@c9000000 {
+ compatible = "snps,arcpgufb";
+ reg = <0xc9000000 0x400>;
+ };
+
+ ps2: ps2@c9001000 {
+ compatible = "snps,arc_ps2";
+ reg = <0xc9000400 0x14>;
+ interrupts = <13>;
+ interrupt-names = "arc_ps2_irq";
+ };
+
+ eth0: ethernet@c0003000 {
+ compatible = "snps,oscilan";
+ reg = <0xc0003000 0x44>;
+ interrupts = <7>, <8>;
+ interrupt-names = "rx", "tx";
+ };
+ };
+};
diff --git a/arch/arc/configs/fpga_defconfig b/arch/arc/configs/fpga_defconfig
index b8698067ebb..95350be6ef6 100644
--- a/arch/arc/configs/fpga_defconfig
+++ b/arch/arc/configs/fpga_defconfig
@@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../arc_initramfs"
+CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
@@ -24,6 +24,7 @@ CONFIG_ARC_PLAT_FPGA_LEGACY=y
CONFIG_ARC_BOARD_ML509=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
+CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
new file mode 100644
index 00000000000..446c96c24ef
--- /dev/null
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -0,0 +1,75 @@
+CONFIG_CROSS_COMPILE="arc-elf32-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="ARCLinux"
+# CONFIG_SWAP is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../arc_initramfs"
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_FPGA_LEGACY=y
+CONFIG_ARC_BOARD_ML509=y
+# CONFIG_ARC_IDE is not set
+# CONFIG_ARCTANGENT_EMAC is not set
+# CONFIG_ARC_HAS_RTSC is not set
+CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_ARC=y
+CONFIG_SERIAL_ARC_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_XZ_DEC=y
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
new file mode 100644
index 00000000000..4fa5cd9f220
--- /dev/null
+++ b/arch/arc/configs/tb10x_defconfig
@@ -0,0 +1,117 @@
+CONFIG_CROSS_COMPILE="arc-elf32-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="tb10x"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio"
+CONFIG_INITRAMFS_ROOT_UID=2100
+CONFIG_INITRAMFS_ROOT_GID=501
+# CONFIG_RD_GZIP is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLOCK is not set
+CONFIG_ARC_PLAT_TB10X=y
+CONFIG_ARC_CACHE_LINE_SHIFT=5
+# CONFIG_ARC_HAS_RTSC is not set
+CONFIG_ARC_STACK_NONEXEC=y
+CONFIG_HZ=250
+CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_DEBUG_FS=y
+CONFIG_STMMAC_DA=y
+CONFIG_STMMAC_CHAINED=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_NET_DMA=y
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
index 97ee96f2650..ee1f6eae82d 100644
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@@ -20,12 +20,20 @@
#include <linux/mm.h>
+/*
+ * Semantically we need this because icache doesn't snoop dcache/dma.
+ * However ARC Cache flush requires paddr as well as vaddr, latter not available
+ * in the flush_icache_page() API. So we no-op it but do the equivalent work
+ * in update_mmu_cache()
+ */
+#define flush_icache_page(vma, page)
+
void flush_cache_all(void);
void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr,
- int len);
+void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len);
+void __inv_icache_page(unsigned long paddr, unsigned long vaddr);
+void __flush_dcache_page(unsigned long paddr);
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
@@ -58,7 +66,7 @@ void dma_cache_wback(unsigned long start, unsigned long sz);
do { \
memcpy(dst, src, len); \
if (vma->vm_flags & VM_EXEC) \
- flush_icache_range_vaddr((unsigned long)(dst), vaddr, len);\
+ __sync_icache_dcache((unsigned long)(dst), vaddr, len); \
} while (0)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index 4c588f9820c..57898a17eb8 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -9,7 +9,8 @@
#ifndef __ASM_ARC_IRQ_H
#define __ASM_ARC_IRQ_H
-#define NR_IRQS 32
+#define NR_CPU_IRQS 32 /* number of interrupt lines of ARC770 CPU */
+#define NR_IRQS 128 /* allow some CPU external IRQ handling */
/* Platform Independent IRQs */
#define TIMER0_IRQ 3
diff --git a/arch/arc/include/asm/serial.h b/arch/arc/include/asm/serial.h
index 4dff5a1e412..602b0970a76 100644
--- a/arch/arc/include/asm/serial.h
+++ b/arch/arc/include/asm/serial.h
@@ -22,4 +22,14 @@
#define BASE_BAUD (arc_get_core_freq() / 16)
+/*
+ * This is definitely going to break early 8250 consoles on multi-platform
+ * images but hey, it won't add any code complexity for a debug feature of
+ * one broken driver.
+ */
+#ifdef CONFIG_ARC_PLAT_TB10X
+#undef BASE_BAUD
+#define BASE_BAUD (arc_get_core_freq() / 16 / 3)
+#endif
+
#endif /* _ASM_ARC_SERIAL_H */
diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h
index 3eb2ce0bdfa..fe91719866a 100644
--- a/arch/arc/include/asm/tlb.h
+++ b/arch/arc/include/asm/tlb.h
@@ -21,20 +21,28 @@
#ifndef __ASSEMBLY__
-#define tlb_flush(tlb) local_flush_tlb_mm((tlb)->mm)
+#define tlb_flush(tlb) \
+do { \
+ if (tlb->fullmm) \
+ flush_tlb_mm((tlb)->mm); \
+} while (0)
/*
* This pair is called at time of munmap/exit to flush cache and TLB entries
* for mappings being torn down.
* 1) cache-flush part -implemented via tlb_start_vma( ) can be NOP (for now)
* as we don't support aliasing configs in our VIPT D$.
- * 2) tlb-flush part - implemted via tlb_end_vma( ) can be NOP as well-
- * albiet for difft reasons - its better handled by moving to new ASID
+ * 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range
*
* Note, read http://lkml.org/lkml/2004/1/15/6
*/
#define tlb_start_vma(tlb, vma)
-#define tlb_end_vma(tlb, vma)
+
+#define tlb_end_vma(tlb, vma) \
+do { \
+ if (!tlb->fullmm) \
+ flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
+} while (0)
#define __tlb_remove_tlb_entry(tlb, ptep, address)
diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c
index 0dc148ebce7..7dcda702524 100644
--- a/arch/arc/kernel/asm-offsets.c
+++ b/arch/arc/kernel/asm-offsets.c
@@ -11,9 +11,9 @@
#include <linux/interrupt.h>
#include <linux/thread_info.h>
#include <linux/kbuild.h>
+#include <linux/ptrace.h>
#include <asm/hardirq.h>
#include <asm/page.h>
-#include <asm/ptrace.h>
int main(void)
{
diff --git a/arch/arc/kernel/clk.c b/arch/arc/kernel/clk.c
index 66ce0dc917f..10c7b0b5a07 100644
--- a/arch/arc/kernel/clk.c
+++ b/arch/arc/kernel/clk.c
@@ -8,7 +8,7 @@
#include <asm/clk.h>
-unsigned long core_freq = 800000000;
+unsigned long core_freq = 80000000;
/*
* As of now we default to device-tree provided clock
diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c
index d14764ae2c6..b8a549c4f54 100644
--- a/arch/arc/kernel/disasm.c
+++ b/arch/arc/kernel/disasm.c
@@ -12,8 +12,8 @@
#include <linux/types.h>
#include <linux/kprobes.h>
#include <linux/slab.h>
+#include <linux/uaccess.h>
#include <asm/disasm.h>
-#include <asm/uaccess.h>
#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \
defined(CONFIG_KPROBES)
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 91eeab81f52..0c6d664d4a8 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -393,12 +393,14 @@ ARC_ENTRY EV_TLBProtV
#ifdef CONFIG_ARC_MISALIGN_ACCESS
SAVE_CALLEE_SAVED_USER
mov r3, sp ; callee_regs
-#endif
bl do_misaligned_access
-#ifdef CONFIG_ARC_MISALIGN_ACCESS
- DISCARD_CALLEE_SAVED_USER
+ ; TBD: optimize - do this only if a callee reg was involved
+ ; either a dst of emulated LD/ST or src with address-writeback
+ RESTORE_CALLEE_SAVED_USER
+#else
+ bl do_misaligned_error
#endif
b ret_from_exception
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index 551c10dff48..8115fa53157 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -11,6 +11,8 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include "../../drivers/irqchip/irqchip.h"
#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/mach_desc.h>
@@ -26,7 +28,7 @@
* -Disable all IRQs (on CPU side)
* -Optionally, setup the High priority Interrupts as Level 2 IRQs
*/
-void __init arc_init_IRQ(void)
+void __cpuinit arc_init_IRQ(void)
{
int level_mask = 0;
@@ -97,15 +99,13 @@ static const struct irq_domain_ops arc_intc_domain_ops = {
static struct irq_domain *root_domain;
-void __init init_onchip_IRQ(void)
+static int __init
+init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
{
- struct device_node *intc = NULL;
+ if (parent)
+ panic("DeviceTree incore intc not a root irq controller\n");
- intc = of_find_compatible_node(NULL, NULL, "snps,arc700-intc");
- if(!intc)
- panic("DeviceTree Missing incore intc\n");
-
- root_domain = irq_domain_add_legacy(intc, NR_IRQS, 0, 0,
+ root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,
&arc_intc_domain_ops, NULL);
if (!root_domain)
@@ -113,8 +113,12 @@ void __init init_onchip_IRQ(void)
/* with this we don't need to export root_domain */
irq_set_default_host(root_domain);
+
+ return 0;
}
+IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
+
/*
* Late Interrupt system init called from start_kernel for Boot CPU only
*
@@ -123,12 +127,13 @@ void __init init_onchip_IRQ(void)
*/
void __init init_IRQ(void)
{
- init_onchip_IRQ();
-
/* Any external intc can be setup here */
if (machine_desc->init_irq)
machine_desc->init_irq();
+ /* process the entire interrupt tree in one go */
+ irqchip_init();
+
#ifdef CONFIG_SMP
/* Master CPU can initialize it's side of IPI */
if (machine_desc->init_smp)
diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
index 3bfeacb674d..5a7b80e2d88 100644
--- a/arch/arc/kernel/kprobes.c
+++ b/arch/arc/kernel/kprobes.c
@@ -10,7 +10,6 @@
#include <linux/kprobes.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/kprobes.h>
#include <linux/kdebug.h>
#include <linux/sched.h>
#include <linux/uaccess.h>
diff --git a/arch/arc/kernel/module.c b/arch/arc/kernel/module.c
index cdd359352c0..376e0462296 100644
--- a/arch/arc/kernel/module.c
+++ b/arch/arc/kernel/module.c
@@ -47,7 +47,7 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
}
}
#endif
- return 0;
+ return 0;
}
void module_arch_cleanup(struct module *mod)
@@ -141,5 +141,5 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
mod->arch.unw_info = unw;
}
#endif
- return 0;
+ return 0;
}
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 2d95ac07df7..b2b3731dd1e 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -14,14 +14,13 @@
#include <linux/module.h>
#include <linux/cpu.h>
#include <linux/of_fdt.h>
+#include <linux/cache.h>
#include <asm/sections.h>
#include <asm/arcregs.h>
#include <asm/tlb.h>
-#include <asm/cache.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/irq.h>
-#include <asm/arcregs.h>
#include <asm/prom.h>
#include <asm/unwind.h>
#include <asm/clk.h>
@@ -32,14 +31,14 @@
int running_on_hw = 1; /* vs. on ISS */
char __initdata command_line[COMMAND_LINE_SIZE];
-struct machine_desc *machine_desc __initdata;
+struct machine_desc *machine_desc __cpuinitdata;
struct task_struct *_current_task[NR_CPUS]; /* For stack switching */
struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
-void __init read_arc_build_cfg_regs(void)
+void __cpuinit read_arc_build_cfg_regs(void)
{
struct bcr_perip uncached_space;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -238,7 +237,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
return buf;
}
-void __init arc_chk_ccms(void)
+void __cpuinit arc_chk_ccms(void)
{
#if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM)
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -273,7 +272,7 @@ void __init arc_chk_ccms(void)
* hardware has dedicated regs which need to be saved/restored on ctx-sw
* (Single Precision uses core regs), thus kernel is kind of oblivious to it
*/
-void __init arc_chk_fpu(void)
+void __cpuinit arc_chk_fpu(void)
{
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -294,7 +293,7 @@ void __init arc_chk_fpu(void)
* such as only for boot CPU etc
*/
-void __init setup_processor(void)
+void __cpuinit setup_processor(void)
{
char str[512];
int cpu_id = smp_processor_id();
@@ -319,23 +318,20 @@ void __init setup_processor(void)
void __init setup_arch(char **cmdline_p)
{
+ /* This also populates @boot_command_line from /bootargs */
+ machine_desc = setup_machine_fdt(__dtb_start);
+ if (!machine_desc)
+ panic("Embedded DT invalid\n");
+
+ /* Append any u-boot provided cmdline */
#ifdef CONFIG_CMDLINE_UBOOT
- /* Make sure that a whitespace is inserted before */
- strlcat(command_line, " ", sizeof(command_line));
+ /* Add a whitespace seperator between the 2 cmdlines */
+ strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+ strlcat(boot_command_line, command_line, COMMAND_LINE_SIZE);
#endif
- /*
- * Append .config cmdline to base command line, which might already
- * contain u-boot "bootargs" (handled by head.S, if so configured)
- */
- strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
/* Save unparsed command line copy for /proc/cmdline */
- strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- machine_desc = setup_machine_fdt(__dtb_start);
- if (!machine_desc)
- panic("Embedded DT invalid\n");
+ *cmdline_p = boot_command_line;
/* To force early parsing of things like mem=xxx */
parse_early_param();
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index f13f72807aa..09f4309aa2c 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -33,7 +33,6 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c
index 7496995371e..0471d9c9dd5 100644
--- a/arch/arc/kernel/traps.c
+++ b/arch/arc/kernel/traps.c
@@ -16,11 +16,12 @@
#include <linux/sched.h>
#include <linux/kdebug.h>
#include <linux/uaccess.h>
-#include <asm/ptrace.h>
+#include <linux/ptrace.h>
+#include <linux/kprobes.h>
+#include <linux/kgdb.h>
#include <asm/setup.h>
-#include <asm/kprobes.h>
#include <asm/unaligned.h>
-#include <asm/kgdb.h>
+#include <asm/kprobes.h>
void __init trap_init(void)
{
@@ -83,6 +84,7 @@ DO_ERROR_INFO(SIGILL, "Invalid Extn Insn", do_extension_fault, ILL_ILLOPC)
DO_ERROR_INFO(SIGILL, "Illegal Insn (or Seq)", insterror_is_error, ILL_ILLOPC)
DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", do_memory_error, BUS_ADRERR)
DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT)
+DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN)
#ifdef CONFIG_ARC_MISALIGN_ACCESS
/*
@@ -91,21 +93,11 @@ DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT)
int do_misaligned_access(unsigned long cause, unsigned long address,
struct pt_regs *regs, struct callee_regs *cregs)
{
- if (misaligned_fixup(address, regs, cause, cregs) != 0) {
- siginfo_t info;
-
- info.si_signo = SIGBUS;
- info.si_errno = 0;
- info.si_code = BUS_ADRALN;
- info.si_addr = (void __user *)address;
- return handle_exception(cause, "Misaligned Access", regs,
- &info);
- }
+ if (misaligned_fixup(address, regs, cause, cregs) != 0)
+ return do_misaligned_error(cause, address, regs);
+
return 0;
}
-
-#else
-DO_ERROR_INFO(SIGSEGV, "Misaligned Access", do_misaligned_access, SEGV_ACCERR)
#endif
/*
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
index 0aec01985bf..11c301b81c9 100644
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@@ -26,7 +26,6 @@ static noinline void print_reg_file(long *reg_rev, int start_num)
char buf[512];
int n = 0, len = sizeof(buf);
- /* weird loop because pt_regs regs rev r12..r0, r25..r13 */
for (i = start_num; i < start_num + 13; i++) {
n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t",
i, (unsigned long)*reg_rev);
@@ -34,13 +33,18 @@ static noinline void print_reg_file(long *reg_rev, int start_num)
if (((i + 1) % 3) == 0)
n += scnprintf(buf + n, len - n, "\n");
+ /* because pt_regs has regs reversed: r12..r0, r25..r13 */
reg_rev--;
}
if (start_num != 0)
n += scnprintf(buf + n, len - n, "\n\n");
- pr_info("%s", buf);
+ /* To continue printing callee regs on same line as scratch regs */
+ if (start_num == 0)
+ pr_info("%s", buf);
+ else
+ pr_cont("%s\n", buf);
}
static void show_callee_regs(struct callee_regs *cregs)
@@ -83,6 +87,10 @@ static void show_faulting_vma(unsigned long address, char *buf)
dev_t dev = 0;
char *nm = buf;
+ /* can't use print_vma_addr() yet as it doesn't check for
+ * non-inclusive vma
+ */
+
vma = find_vma(current->active_mm, address);
/* check against the find_vma( ) behaviour which returns the next VMA
@@ -98,10 +106,13 @@ static void show_faulting_vma(unsigned long address, char *buf)
ino = inode->i_ino;
}
pr_info(" @off 0x%lx in [%s]\n"
- " VMA: 0x%08lx to 0x%08lx\n\n",
- address - vma->vm_start, nm, vma->vm_start, vma->vm_end);
- } else
+ " VMA: 0x%08lx to 0x%08lx\n",
+ vma->vm_start < TASK_UNMAPPED_BASE ?
+ address : address - vma->vm_start,
+ nm, vma->vm_start, vma->vm_end);
+ } else {
pr_info(" @No matching VMA found\n");
+ }
}
static void show_ecr_verbose(struct pt_regs *regs)
@@ -110,7 +121,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
unsigned long address;
cause_reg = current->thread.cause_code;
- pr_info("\n[ECR]: 0x%08x => ", cause_reg);
+ pr_info("\n[ECR ]: 0x%08x => ", cause_reg);
/* For Data fault, this is data address not instruction addr */
address = current->thread.fault_address;
@@ -120,7 +131,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
/* For DTLB Miss or ProtV, display the memory involved too */
if (vec == ECR_V_DTLB_MISS) {
- pr_cont("Invalid (%s) @ 0x%08lx by insn @ 0x%08lx\n",
+ pr_cont("Invalid %s 0x%08lx by insn @ 0x%08lx\n",
(cause_code == 0x01) ? "Read From" :
((cause_code == 0x02) ? "Write to" : "EX"),
address, regs->ret);
@@ -168,20 +179,23 @@ void show_regs(struct pt_regs *regs)
if (current->thread.cause_code)
show_ecr_verbose(regs);
- pr_info("[EFA]: 0x%08lx\n", current->thread.fault_address);
- pr_info("[ERET]: 0x%08lx (PC of Faulting Instr)\n", regs->ret);
+ pr_info("[EFA ]: 0x%08lx\n[BLINK ]: %pS\n[ERET ]: %pS\n",
+ current->thread.fault_address,
+ (void *)regs->blink, (void *)regs->ret);
- show_faulting_vma(regs->ret, buf); /* faulting code, not data */
+ if (user_mode(regs))
+ show_faulting_vma(regs->ret, buf); /* faulting code, not data */
- /* can't use print_vma_addr() yet as it doesn't check for
- * non-inclusive vma
- */
+ pr_info("[STAT32]: 0x%08lx", regs->status32);
+
+#define STS_BIT(r, bit) r->status32 & STATUS_##bit##_MASK ? #bit : ""
+ if (!user_mode(regs))
+ pr_cont(" : %2s %2s %2s %2s %2s\n",
+ STS_BIT(regs, AE), STS_BIT(regs, A2), STS_BIT(regs, A1),
+ STS_BIT(regs, E2), STS_BIT(regs, E1));
- /* print special regs */
- pr_info("status32: 0x%08lx\n", regs->status32);
- pr_info(" SP: 0x%08lx\tFP: 0x%08lx\n", regs->sp, regs->fp);
- pr_info("BTA: 0x%08lx\tBLINK: 0x%08lx\n",
- regs->bta, regs->blink);
+ pr_info("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n",
+ regs->bta, regs->sp, regs->fp);
pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
regs->lp_start, regs->lp_end, regs->lp_count);
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 88d617d8423..c854cf95f70 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -72,16 +72,6 @@
#include <asm/cachectl.h>
#include <asm/setup.h>
-
-#ifdef CONFIG_ARC_HAS_ICACHE
-static void __ic_line_inv_no_alias(unsigned long, int);
-static void __ic_line_inv_2_alias(unsigned long, int);
-static void __ic_line_inv_4_alias(unsigned long, int);
-
-/* Holds the ptr to flush routine, dependign on size due to aliasing issues */
-static void (*___flush_icache_rtn) (unsigned long, int);
-#endif
-
char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
{
int n = 0;
@@ -109,7 +99,7 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
* the cpuinfo structure for later use.
* No Validation done here, simply read/convert the BCRs
*/
-void __init read_decode_cache_bcr(void)
+void __cpuinit read_decode_cache_bcr(void)
{
struct bcr_cache ibcr, dbcr;
struct cpuinfo_arc_cache *p_ic, *p_dc;
@@ -141,7 +131,7 @@ void __init read_decode_cache_bcr(void)
* 3. Enable the Caches, setup default flush mode for D-Cache
* 3. Calculate the SHMLBA used by user space
*/
-void __init arc_cache_init(void)
+void __cpuinit arc_cache_init(void)
{
unsigned int temp;
unsigned int cpu = smp_processor_id();
@@ -171,30 +161,6 @@ void __init arc_cache_init(void)
}
#endif
-
- /*
- * if Cache way size is <= page size then no aliasing exhibited
- * otherwise ratio determines num of aliases.
- * e.g. 32K I$, 2 way set assoc, 8k pg size
- * way-sz = 32k/2 = 16k
- * way-pg-ratio = 16k/8k = 2, so 2 aliases possible
- * (meaning 1 line could be in 2 possible locations).
- */
- way_pg_ratio = ic->sz / ARC_ICACHE_WAYS / PAGE_SIZE;
- switch (way_pg_ratio) {
- case 0:
- case 1:
- ___flush_icache_rtn = __ic_line_inv_no_alias;
- break;
- case 2:
- ___flush_icache_rtn = __ic_line_inv_2_alias;
- break;
- case 4:
- ___flush_icache_rtn = __ic_line_inv_4_alias;
- break;
- default:
- panic("Unsupported I-Cache Sz\n");
- }
#endif
/* Enable/disable I-Cache */
@@ -391,75 +357,38 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz,
/*
* I-Cache Aliasing in ARC700 VIPT caches
*
- * For fetching code from I$, ARC700 uses vaddr (embedded in program code)
- * to "index" into SET of cache-line and paddr from MMU to match the TAG
- * in the WAYS of SET.
+ * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
+ * The orig Cache Management Module "CDU" only required paddr to invalidate a
+ * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
+ * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
+ * the exact same line.
*
- * However the CDU iterface (to flush/inv) lines from software, only takes
- * paddr (to have simpler hardware interface). For simpler cases, using paddr
- * alone suffices.
- * e.g. 2-way-set-assoc, 16K I$ (8k MMU pg sz, 32b cache line size):
- * way_sz = cache_sz / num_ways = 16k/2 = 8k
- * num_sets = way_sz / line_sz = 8k/32 = 256 => 8 bits
- * Ignoring the bottom 5 bits corresp to the off within a 32b cacheline,
- * bits req for calc set-index = bits 12:5 (0 based). Since this range fits
- * inside the bottom 13 bits of paddr, which are same for vaddr and paddr
- * (with 8k pg sz), paddr alone can be safely used by CDU to unambigously
- * locate a cache-line.
- *
- * However for a difft sized cache, say 32k I$, above math yields need
- * for 14 bits of vaddr to locate a cache line, which can't be provided by
- * paddr, since the bit 13 (0 based) might differ between the two.
- *
- * This lack of extra bits needed for correct line addressing, defines the
- * classical problem of Cache aliasing with VIPT architectures
- * num_aliases = 1 << extra_bits
- * e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz => 2 aliases
- * 2-way-set-assoc, 64K I$ with 8k MMU pg sz => 4 aliases
- * 2-way-set-assoc, 16K I$ with 8k MMU pg sz => NO aliases
+ * However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
+ * paddr alone could not be used to correctly index the cache.
*
* ------------------
* MMU v1/v2 (Fixed Page Size 8k)
* ------------------
* The solution was to provide CDU with these additonal vaddr bits. These
- * would be bits [x:13], x would depend on cache-geom.
+ * would be bits [x:13], x would depend on cache-geometry, 13 comes from
+ * standard page size of 8k.
* H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
* of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
* orig 5 bits of paddr were anyways ignored by CDU line ops, as they
* represent the offset within cache-line. The adv of using this "clumsy"
- * interface for additional info was no new reg was needed in CDU.
+ * interface for additional info was no new reg was needed in CDU programming
+ * model.
*
* 17:13 represented the max num of bits passable, actual bits needed were
* fewer, based on the num-of-aliases possible.
* -for 2 alias possibility, only bit 13 needed (32K cache)
* -for 4 alias possibility, bits 14:13 needed (64K cache)
*
- * Since vaddr was not available for all instances of I$ flush req by core
- * kernel, the only safe way (non-optimal though) was to kill all possible
- * lines which could represent an alias (even if they didnt represent one
- * in execution).
- * e.g. for 64K I$, 4 aliases possible, so we did
- * flush start
- * flush start | 0x01
- * flush start | 0x2
- * flush start | 0x3
- *
- * The penalty was invoking the operation itself, since tag match is anyways
- * paddr based, a line which didn't represent an alias would not match the
- * paddr, hence wont be killed
- *
- * Note that aliasing concerns are independent of line-sz for a given cache
- * geometry (size + set_assoc) because the extra bits required by line-sz are
- * reduced from the set calc.
- * e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz and using math above
- * 32b line-sz: 9 bits set-index-calc, 5 bits offset-in-line => 1 extra bit
- * 64b line-sz: 8 bits set-index-calc, 6 bits offset-in-line => 1 extra bit
- *
* ------------------
* MMU v3
* ------------------
- * This ver of MMU supports var page sizes (1k-16k) - Linux will support
- * 8k (default), 16k and 4k.
+ * This ver of MMU supports variable page sizes (1k-16k): although Linux will
+ * only support 8k (default), 16k and 4k.
* However from hardware perspective, smaller page sizes aggrevate aliasing
* meaning more vaddr bits needed to disambiguate the cache-line-op ;
* the existing scheme of piggybacking won't work for certain configurations.
@@ -468,115 +397,29 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz,
*/
/***********************************************************
- * Machine specific helpers for per line I-Cache invalidate.
- * 3 routines to accpunt for 1, 2, 4 aliases possible
+ * Machine specific helper for per line I-Cache invalidate.
*/
-
-static void __ic_line_inv_no_alias(unsigned long start, int num_lines)
-{
- while (num_lines-- > 0) {
-#if (CONFIG_ARC_MMU_VER > 2)
- write_aux_reg(ARC_REG_IC_PTAG, start);
-#endif
- write_aux_reg(ARC_REG_IC_IVIL, start);
- start += ARC_ICACHE_LINE_LEN;
- }
-}
-
-static void __ic_line_inv_2_alias(unsigned long start, int num_lines)
-{
- while (num_lines-- > 0) {
-
-#if (CONFIG_ARC_MMU_VER > 2)
- /*
- * MMU v3, CDU prog model (for line ops) now uses a new IC_PTAG
- * reg to pass the "tag" bits and existing IVIL reg only looks
- * at bits relevant for "index" (details above)
- * Programming Notes:
- * -when writing tag to PTAG reg, bit chopping can be avoided,
- * CDU ignores non-tag bits.
- * -Ideally "index" must be computed from vaddr, but it is not
- * avail in these rtns. So to be safe, we kill the lines in all
- * possible indexes corresp to num of aliases possible for
- * given cache config.
- */
- write_aux_reg(ARC_REG_IC_PTAG, start);
- write_aux_reg(ARC_REG_IC_IVIL,
- start & ~(0x1 << PAGE_SHIFT));
- write_aux_reg(ARC_REG_IC_IVIL, start | (0x1 << PAGE_SHIFT));
-#else
- write_aux_reg(ARC_REG_IC_IVIL, start);
- write_aux_reg(ARC_REG_IC_IVIL, start | 0x01);
-#endif
- start += ARC_ICACHE_LINE_LEN;
- }
-}
-
-static void __ic_line_inv_4_alias(unsigned long start, int num_lines)
-{
- while (num_lines-- > 0) {
-
-#if (CONFIG_ARC_MMU_VER > 2)
- write_aux_reg(ARC_REG_IC_PTAG, start);
-
- write_aux_reg(ARC_REG_IC_IVIL,
- start & ~(0x3 << PAGE_SHIFT));
- write_aux_reg(ARC_REG_IC_IVIL,
- start & ~(0x2 << PAGE_SHIFT));
- write_aux_reg(ARC_REG_IC_IVIL,
- start & ~(0x1 << PAGE_SHIFT));
- write_aux_reg(ARC_REG_IC_IVIL, start | (0x3 << PAGE_SHIFT));
-#else
- write_aux_reg(ARC_REG_IC_IVIL, start);
- write_aux_reg(ARC_REG_IC_IVIL, start | 0x01);
- write_aux_reg(ARC_REG_IC_IVIL, start | 0x02);
- write_aux_reg(ARC_REG_IC_IVIL, start | 0x03);
-#endif
- start += ARC_ICACHE_LINE_LEN;
- }
-}
-
-static void __ic_line_inv(unsigned long start, unsigned long sz)
+static void __ic_line_inv_vaddr(unsigned long phy_start, unsigned long vaddr,
+ unsigned long sz)
{
unsigned long flags;
int num_lines, slack;
+ unsigned int addr;
/*
- * Ensure we properly floor/ceil the non-line aligned/sized requests
- * and have @start - aligned to cache line, and integral @num_lines
+ * Ensure we properly floor/ceil the non-line aligned/sized requests:
* However page sized flushes can be compile time optimised.
- * -@start will be cache-line aligned already (being page aligned)
+ * -@phy_start will be cache-line aligned already (being page aligned)
* -@sz will be integral multiple of line size (being page sized).
*/
if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) {
- slack = start & ~ICACHE_LINE_MASK;
+ slack = phy_start & ~ICACHE_LINE_MASK;
sz += slack;
- start -= slack;
+ phy_start -= slack;
}
num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN);
- local_irq_save(flags);
- (*___flush_icache_rtn) (start, num_lines);
- local_irq_restore(flags);
-}
-
-/* Unlike routines above, having vaddr for flush op (along with paddr),
- * prevents the need to speculatively kill the lines in multiple sets
- * based on ratio of way_sz : pg_sz
- */
-static void __ic_line_inv_vaddr(unsigned long phy_start,
- unsigned long vaddr, unsigned long sz)
-{
- unsigned long flags;
- int num_lines, slack;
- unsigned int addr;
-
- slack = phy_start & ~ICACHE_LINE_MASK;
- sz += slack;
- phy_start -= slack;
- num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN);
-
#if (CONFIG_ARC_MMU_VER > 2)
vaddr &= ~ICACHE_LINE_MASK;
addr = phy_start;
@@ -595,7 +438,7 @@ static void __ic_line_inv_vaddr(unsigned long phy_start,
write_aux_reg(ARC_REG_IC_IVIL, vaddr);
vaddr += ARC_ICACHE_LINE_LEN;
#else
- /* this paddr contains vaddrs bits as needed */
+ /* paddr contains stuffed vaddrs bits */
write_aux_reg(ARC_REG_IC_IVIL, addr);
#endif
addr += ARC_ICACHE_LINE_LEN;
@@ -605,7 +448,6 @@ static void __ic_line_inv_vaddr(unsigned long phy_start,
#else
-#define __ic_line_inv(start, sz)
#define __ic_line_inv_vaddr(pstart, vstart, sz)
#endif /* CONFIG_ARC_HAS_ICACHE */
@@ -615,10 +457,10 @@ static void __ic_line_inv_vaddr(unsigned long phy_start,
* Exported APIs
*/
-/* TBD: use pg_arch_1 to optimize this */
void flush_dcache_page(struct page *page)
{
- __dc_line_op((unsigned long)page_address(page), PAGE_SIZE, OP_FLUSH);
+ /* Make a note that dcache is not yet flushed for this page */
+ set_bit(PG_arch_1, &page->flags);
}
EXPORT_SYMBOL(flush_dcache_page);
@@ -642,8 +484,8 @@ void dma_cache_wback(unsigned long start, unsigned long sz)
EXPORT_SYMBOL(dma_cache_wback);
/*
- * This is API for making I/D Caches consistent when modifying code
- * (loadable modules, kprobes, etc)
+ * This is API for making I/D Caches consistent when modifying
+ * kernel code (loadable modules, kprobes, kgdb...)
* This is called on insmod, with kernel virtual address for CODE of
* the module. ARC cache maintenance ops require PHY address thus we
* need to convert vmalloc addr to PHY addr
@@ -652,7 +494,6 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
{
unsigned int tot_sz, off, sz;
unsigned long phy, pfn;
- unsigned long flags;
/* printk("Kernel Cache Cohenercy: %lx to %lx\n",kstart, kend); */
@@ -673,8 +514,13 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
/* Case: Kernel Phy addr (0x8000_0000 onwards) */
if (likely(kstart > PAGE_OFFSET)) {
- __ic_line_inv(kstart, kend - kstart);
- __dc_line_op(kstart, kend - kstart, OP_FLUSH);
+ /*
+ * The 2nd arg despite being paddr will be used to index icache
+ * This is OK since no alternate virtual mappings will exist
+ * given the callers for this case: kprobe/kgdb in built-in
+ * kernel code only.
+ */
+ __sync_icache_dcache(kstart, kstart, kend - kstart);
return;
}
@@ -692,42 +538,41 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
pfn = vmalloc_to_pfn((void *)kstart);
phy = (pfn << PAGE_SHIFT) + off;
sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off);
- local_irq_save(flags);
- __dc_line_op(phy, sz, OP_FLUSH);
- __ic_line_inv(phy, sz);
- local_irq_restore(flags);
+ __sync_icache_dcache(phy, kstart, sz);
kstart += sz;
tot_sz -= sz;
}
}
/*
- * Optimised ver of flush_icache_range() with spec callers: ptrace/signals
- * where vaddr is also available. This allows passing both vaddr and paddr
- * bits to CDU for cache flush, short-circuting the current pessimistic algo
- * which kills all possible aliases.
- * An added adv of knowing that vaddr is user-vaddr avoids various checks
- * and handling for k-vaddr, k-paddr as done in orig ver above
+ * General purpose helper to make I and D cache lines consistent.
+ * @paddr is phy addr of region
+ * @vaddr is typically user or kernel vaddr (vmalloc)
+ * Howver in one instance, flush_icache_range() by kprobe (for a breakpt in
+ * builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
+ * use a paddr to index the cache (despite VIPT). This is fine since since a
+ * built-in kernel page will not have any virtual mappings (not even kernel)
+ * kprobe on loadable module is different as it will have kvaddr.
*/
-void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr,
- int len)
+void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
{
- __ic_line_inv_vaddr(paddr, u_vaddr, len);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __ic_line_inv_vaddr(paddr, vaddr, len);
__dc_line_op(paddr, len, OP_FLUSH);
+ local_irq_restore(flags);
}
-/*
- * XXX: This also needs to be optim using pg_arch_1
- * This is called when a page-cache page is about to be mapped into a
- * user process' address space. It offers an opportunity for a
- * port to ensure d-cache/i-cache coherency if necessary.
- */
-void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+/* wrapper to compile time eliminate alignment checks in flush loop */
+void __inv_icache_page(unsigned long paddr, unsigned long vaddr)
{
- if (!(vma->vm_flags & VM_EXEC))
- return;
+ __ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
+}
- __ic_line_inv((unsigned long)page_address(page), PAGE_SIZE);
+void __flush_dcache_page(unsigned long paddr)
+{
+ __dc_line_op(paddr, PAGE_SIZE, OP_FLUSH_N_INV);
}
void flush_icache_all(void)
diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c
index 014172ba843..aa652e28132 100644
--- a/arch/arc/mm/extable.c
+++ b/arch/arc/mm/extable.c
@@ -27,7 +27,7 @@ int fixup_exception(struct pt_regs *regs)
#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-long arc_copy_from_user_noinline(void *to, const void __user * from,
+long arc_copy_from_user_noinline(void *to, const void __user *from,
unsigned long n)
{
return __arc_copy_from_user(to, from, n);
@@ -48,7 +48,7 @@ unsigned long arc_clear_user_noinline(void __user *to,
}
EXPORT_SYMBOL(arc_clear_user_noinline);
-long arc_strncpy_from_user_noinline (char *dst, const char __user *src,
+long arc_strncpy_from_user_noinline(char *dst, const char __user *src,
long count)
{
return __arc_strncpy_from_user(dst, src, count);
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index af55aab803d..689ffd86d5e 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -12,7 +12,6 @@
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
-#include <linux/version.h>
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <asm/pgalloc.h>
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index 727d4794ea0..4a177365b2c 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -10,9 +10,6 @@
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
-#ifdef CONFIG_BLOCK_DEV_RAM
-#include <linux/blk.h>
-#endif
#include <linux/swap.h>
#include <linux/module.h>
#include <asm/page.h>
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index 3e5c92c7993..739e65f355d 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -12,7 +12,7 @@
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <asm/cache.h>
+#include <linux/cache.h>
void __iomem *ioremap(unsigned long paddr, unsigned long size)
{
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 9b9ce23f4ec..003d69ac6ff 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -418,23 +418,37 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
local_irq_restore(flags);
}
-/* arch hook called by core VM at the end of handle_mm_fault( ),
- * when a new PTE is entered in Page Tables or an existing one
- * is modified. We aggresively pre-install a TLB entry
+/*
+ * Called at the end of pagefault, for a userspace mapped page
+ * -pre-install the corresponding TLB entry into MMU
+ * -Finalize the delayed D-cache flush (wback+inv kernel mapping)
*/
-
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddress,
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
pte_t *ptep)
{
+ unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
+
+ create_tlb(vma, vaddr, ptep);
- create_tlb(vma, vaddress, ptep);
+ /* icache doesn't snoop dcache, thus needs to be made coherent here */
+ if (vma->vm_flags & VM_EXEC) {
+ struct page *page = pfn_to_page(pte_pfn(*ptep));
+
+ /* if page was dcache dirty, flush now */
+ int dirty = test_and_clear_bit(PG_arch_1, &page->flags);
+ if (dirty) {
+ unsigned long paddr = pte_val(*ptep) & PAGE_MASK;
+ __flush_dcache_page(paddr);
+ __inv_icache_page(paddr, vaddr);
+ }
+ }
}
/* Read the Cache Build Confuration Registers, Decode them and save into
* the cpuinfo structure for later use.
* No Validation is done here, simply read/convert the BCRs
*/
-void __init read_decode_mmu_bcr(void)
+void __cpuinit read_decode_mmu_bcr(void)
{
unsigned int tmp;
struct bcr_mmu_1_2 *mmu2; /* encoded MMU2 attr */
@@ -466,7 +480,7 @@ void __init read_decode_mmu_bcr(void)
char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
{
int n = 0;
- struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+ struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu;
n += scnprintf(buf + n, len - n, "ARC700 MMU [v%x]\t: %dk PAGE, ",
p_mmu->ver, TO_KB(p_mmu->pg_sz));
@@ -480,7 +494,7 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
return buf;
}
-void __init arc_mmu_init(void)
+void __cpuinit arc_mmu_init(void)
{
char str[256];
struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c
index 4e20a1a5104..b3700c064c0 100644
--- a/arch/arc/plat-arcfpga/platform.c
+++ b/arch/arc/plat-arcfpga/platform.c
@@ -224,3 +224,15 @@ MACHINE_START(ML509, "ml509")
.init_smp = iss_model_init_smp,
#endif
MACHINE_END
+
+static const char *nsimosci_compat[] __initdata = {
+ "snps,nsimosci",
+ NULL,
+};
+
+MACHINE_START(NSIMOSCI, "nsimosci")
+ .dt_compat = nsimosci_compat,
+ .init_early = NULL,
+ .init_machine = plat_fpga_populate_dev,
+ .init_irq = NULL,
+MACHINE_END
diff --git a/arch/arc/plat-tb10x/Kconfig b/arch/arc/plat-tb10x/Kconfig
new file mode 100644
index 00000000000..4e121272c4e
--- /dev/null
+++ b/arch/arc/plat-tb10x/Kconfig
@@ -0,0 +1,36 @@
+# Abilis Systems TB10x platform kernel configuration file
+#
+# Author: Christian Ruppert <christian.ruppert@abilis.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+menuconfig ARC_PLAT_TB10X
+ bool "Abilis TB10x"
+ select COMMON_CLK
+ select PINCTRL
+ select PINMUX
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for platforms based on the TB10x home media gateway SOC by
+ Abilis Systems. TB10x is based on the ARC700 CPU architecture.
+ Say Y if you are building a kernel for one of the SOCs in this
+ series (e.g. TB100 or TB101). If in doubt say N.
+
+if ARC_PLAT_TB10X
+
+config GENERIC_GPIO
+ def_bool y
+
+endif
diff --git a/arch/arc/plat-tb10x/Makefile b/arch/arc/plat-tb10x/Makefile
new file mode 100644
index 00000000000..89611d25ef3
--- /dev/null
+++ b/arch/arc/plat-tb10x/Makefile
@@ -0,0 +1,21 @@
+# Abilis Systems TB10x platform Makefile
+#
+# Author: Christian Ruppert <christian.ruppert@abilis.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+KBUILD_CFLAGS += -Iarch/arc/plat-tb10x/include
+
+obj-y += tb10x.o
diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c
new file mode 100644
index 00000000000..d3567691c7e
--- /dev/null
+++ b/arch/arc/plat-tb10x/tb10x.c
@@ -0,0 +1,71 @@
+/*
+ * Abilis Systems TB10x platform initialisation
+ *
+ * Copyright (C) Abilis Systems 2012
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <asm/mach_desc.h>
+
+
+static void __init tb10x_platform_init(void)
+{
+ of_clk_init(NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void __init tb10x_platform_late_init(void)
+{
+ struct device_node *dn;
+
+ /*
+ * Pinctrl documentation recommends setting up the iomux here for
+ * all modules which don't require control over the pins themselves.
+ * Modules which need this kind of assistance are compatible with
+ * "abilis,simple-pinctrl", i.e. we can easily iterate over them.
+ * TODO: Does this recommended method work cleanly with pins required
+ * by modules?
+ */
+ for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") {
+ struct platform_device *pd = of_find_device_by_node(dn);
+ struct pinctrl *pctl;
+
+ pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default");
+ if (IS_ERR(pctl)) {
+ int ret = PTR_ERR(pctl);
+ dev_err(&pd->dev, "Could not set up pinctrl: %d\n",
+ ret);
+ }
+ }
+}
+
+static const char *tb10x_compat[] __initdata = {
+ "abilis,arc-tb10x",
+ NULL,
+};
+
+MACHINE_START(TB10x, "tb10x")
+ .dt_compat = tb10x_compat,
+ .init_machine = tb10x_platform_init,
+ .init_late = tb10x_platform_late_init,
+MACHINE_END