diff options
Diffstat (limited to 'arch/sh/boards/se/7751')
| -rw-r--r-- | arch/sh/boards/se/7751/Makefile | 8 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/io.c | 244 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/irq.c | 67 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/led.c | 68 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/mach.c | 55 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/pci.c | 148 | ||||
| -rw-r--r-- | arch/sh/boards/se/7751/setup.c | 228 |
7 files changed, 818 insertions, 0 deletions
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile new file mode 100644 index 00000000000..ce7ca247f84 --- /dev/null +++ b/arch/sh/boards/se/7751/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the 7751 SolutionEngine specific parts of the kernel +# + +obj-y := mach.o setup.o io.o irq.o led.o + +obj-$(CONFIG_PCI) += pci.o + diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c new file mode 100644 index 00000000000..99041b26926 --- /dev/null +++ b/arch/sh/boards/se/7751/io.c @@ -0,0 +1,244 @@ +/* + * linux/arch/sh/kernel/io_7751se.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for Hitachi 7751 SolutionEngine. + * + * Initial version only to support LAN access; some + * placeholder code from io_se.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/se7751/se7751.h> +#include <asm/addrspace.h> + +#include <linux/pci.h> +#include "../../../drivers/pci/pci-sh7751.h" + +#if 0 +/****************************************************************** + * Variables from io_se.c, related to PCMCIA (not PCI); we're not + * compiling them in, and have removed references from functions + * which follow. [Many checked for IO ports in the range bounded + * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset. + * As start/stop are uninitialized, only port 0x0 would match?] + * When used, remember to adjust names to avoid clash with io_se? + *****************************************************************/ +/* SH pcmcia io window base, start and end. */ +int sh_pcic_io_wbase = 0xb8400000; +int sh_pcic_io_start; +int sh_pcic_io_stop; +int sh_pcic_io_type; +int sh_pcic_io_dummy; +/*************************************************************/ +#endif + +/* + * The 7751 Solution Engine uses the built-in PCI controller (PCIC) + * of the 7751 processor, and has a SuperIO accessible via the PCI. + * The board also includes a PCMCIA controller on its memory bus, + * like the other Solution Engine boards. + */ + +#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) +#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) +#define PCI_IO_AREA SH7751_PCI_IO_BASE +#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE + +#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +static inline volatile __u16 * +port2adr(unsigned int port) +{ + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); +#if 0 + else + return (volatile __u16 *) (PA_SUPERIO + (port << 1)); +#endif + maybebadio(name,(unsigned long)port); + return (volatile __u16*)port; +} + +#if 0 +/* The 7751 Solution Engine seems to have everything hooked */ +/* up pretty normally (nothing on high-bytes only...) so this */ +/* shouldn't be needed */ +static inline int +shifted_port(unsigned long port) +{ + /* For IDE registers, value is not shifted */ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + return 0; + else + return 1; +} +#endif + +/* In case someone configures the kernel w/o PCI support: in that */ +/* scenario, don't ever bother to check for PCI-window addresses */ + +/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ +#if defined(CONFIG_PCI) +#define CHECK_SH7751_PCIIO(port) \ + ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) +#else +#define CHECK_SH7751_PCIIO(port) (0) +#endif + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +unsigned char sh7751se_inb(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned char *)PCI_IOMAP(port); + else + return (*port2adr(port))&0xff; +} + +unsigned char sh7751se_inb_p(unsigned long port) +{ + unsigned char v; + + if (PXSEG(port)) + v = *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + v = *(volatile unsigned char *)PCI_IOMAP(port); + else + v = (*port2adr(port))&0xff; + delay(); + return v; +} + +unsigned short sh7751se_inw(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned short *)PCI_IOMAP(port); + else if (port >= 0x2000) + return *port2adr(port); + else + maybebadio(inw, port); + return 0; +} + +unsigned int sh7751se_inl(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned long *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned int *)PCI_IOMAP(port); + else if (port >= 0x2000) + return *port2adr(port); + else + maybebadio(inl, port); + return 0; +} + +void sh7751se_outb(unsigned char value, unsigned long port) +{ + + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned char*)PCI_IOMAP(port)) = value; + else + *(port2adr(port)) = value; +} + +void sh7751se_outb_p(unsigned char value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned char*)PCI_IOMAP(port)) = value; + else + *(port2adr(port)) = value; + delay(); +} + +void sh7751se_outw(unsigned short value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned short *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned short *)PCI_IOMAP(port)) = value; + else if (port >= 0x2000) + *port2adr(port) = value; + else + maybebadio(outw, port); +} + +void sh7751se_outl(unsigned int value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned long *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *((unsigned long*)PCI_IOMAP(port)) = value; + else + maybebadio(outl, port); +} + +void sh7751se_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(insl, port); +} + +void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(outsw, port); +} + +/* Map ISA bus address to the real address. Only for PCMCIA. */ + +/* ISA page descriptor. */ +static __u32 sh_isa_memmap[256]; + +#if 0 +static int +sh_isa_mmap(__u32 start, __u32 length, __u32 offset) +{ + int idx; + + if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) + return -1; + + idx = start >> 12; + sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); + printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", + start, length, offset, idx, sh_isa_memmap[idx]); + return 0; +} +#endif + +unsigned long +sh7751se_isa_port2addr(unsigned long offset) +{ + int idx; + + idx = (offset >> 12) & 0xff; + offset &= 0xfff; + return sh_isa_memmap[idx] + offset; +} diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c new file mode 100644 index 00000000000..ad71f3e66c1 --- /dev/null +++ b/arch/sh/boards/se/7751/irq.c @@ -0,0 +1,67 @@ +/* + * linux/arch/sh/boards/se/7751/irq.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/irq.h> +#include <asm/se7751/se7751.h> + +/* + * Initialize IRQ setting + */ +void __init init_7751se_IRQ(void) +{ + + /* Leave old Solution Engine code in for reference. */ +#if defined(CONFIG_SH_SOLUTION_ENGINE) + /* + * Super I/O (Just mimic PC): + * 1: keyboard + * 3: serial 0 + * 4: serial 1 + * 5: printer + * 6: floppy + * 8: rtc + * 12: mouse + * 14: ide0 + */ + make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); + make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); + make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); + make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); + make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); + make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); + make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); + make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); + + make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ + + make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ + make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ + make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ + make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ + + /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ + /* NOTE: #2 and #13 are not used on PC */ + make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ + make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ + +#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE) + + make_ipr_irq(13, BCR_ILCRD, 3, 2); + + /* Add additional calls to make_ipr_irq() as drivers are added + * and tested. + */ +#endif + +} diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c new file mode 100644 index 00000000000..0c788230cf8 --- /dev/null +++ b/arch/sh/boards/se/7751/led.c @@ -0,0 +1,68 @@ +/* + * linux/arch/sh/kernel/led_se.c + * + * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Solution Engine specific LED code. + */ + +#include <linux/config.h> +#include <asm/se7751/se7751.h> + +static void mach_led(int position, int value) +{ + volatile unsigned short* p = (volatile unsigned short*)PA_LED; + + if (value) { + *p |= (1<<8); + } else { + *p &= ~(1<<8); + } +} + +#ifdef CONFIG_HEARTBEAT + +#include <linux/sched.h> + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_7751se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short* p = (volatile unsigned short*)PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ( (300<<FSHIFT)/ + ((avenrun[0]/5) + (3<<FSHIFT)) ); + + if (up) { + if (bit == 7) { + bit--; + up=0; + } else { + bit ++; + } + } else { + if (bit == 0) { + bit++; + up=1; + } else { + bit--; + } + } + *p = 1<<(bit+8); + +} +#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/7751/mach.c b/arch/sh/boards/se/7751/mach.c new file mode 100644 index 00000000000..16d386b7e3b --- /dev/null +++ b/arch/sh/boards/se/7751/mach.c @@ -0,0 +1,55 @@ +/* + * linux/arch/sh/kernel/mach_7751se.c + * + * Minor tweak of mach_se.c file to reference 7751se-specific items. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Machine vector for the Hitachi 7751 SolutionEngine + */ + +#include <linux/config.h> +#include <linux/init.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> + +#include <asm/se7751/io.h> + +void heartbeat_7751se(void); +void init_7751se_IRQ(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_7751se __initmv = { + .mv_nr_irqs = 72, + + .mv_inb = sh7751se_inb, + .mv_inw = sh7751se_inw, + .mv_inl = sh7751se_inl, + .mv_outb = sh7751se_outb, + .mv_outw = sh7751se_outw, + .mv_outl = sh7751se_outl, + + .mv_inb_p = sh7751se_inb_p, + .mv_inw_p = sh7751se_inw, + .mv_inl_p = sh7751se_inl, + .mv_outb_p = sh7751se_outb_p, + .mv_outw_p = sh7751se_outw, + .mv_outl_p = sh7751se_outl, + + .mv_insl = sh7751se_insl, + .mv_outsl = sh7751se_outsl, + + .mv_isa_port2addr = sh7751se_isa_port2addr, + + .mv_init_irq = init_7751se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_7751se, +#endif +}; +ALIAS_MV(7751se) diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/se/7751/pci.c new file mode 100644 index 00000000000..1f273efd2cf --- /dev/null +++ b/arch/sh/boards/se/7751/pci.c @@ -0,0 +1,148 @@ +/* + * linux/arch/sh/kernel/pci-7751se.c + * + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01) + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include "../../../drivers/pci/pci-sh7751.h" + +#define PCIMCR_MRSET_OFF 0xBFFFFFFF +#define PCIMCR_RFSH_OFF 0xFFFFFFFB + +/* + * Only long word accesses of the PCIC's internal local registers and the + * configuration registers from the CPU is supported. + */ +#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) +#define PCIC_READ(x) readl(PCI_REG(x)) + +/* + * Description: This function sets up and initializes the pcic, sets + * up the BARS, maps the DRAM into the address space etc, etc. + */ +int __init pcibios_init_platform(void) +{ + unsigned long bcr1, wcr1, wcr2, wcr3, mcr; + unsigned short bcr2; + + /* + * Initialize the slave bus controller on the pcic. The values used + * here should not be hardcoded, but they should be taken from the bsc + * on the processor, to make this function as generic as possible. + * (i.e. Another sbc may usr different SDRAM timing settings -- in order + * for the pcic to work, its settings need to be exactly the same.) + */ + bcr1 = (*(volatile unsigned long*)(SH7751_BCR1)); + bcr2 = (*(volatile unsigned short*)(SH7751_BCR2)); + wcr1 = (*(volatile unsigned long*)(SH7751_WCR1)); + wcr2 = (*(volatile unsigned long*)(SH7751_WCR2)); + wcr3 = (*(volatile unsigned long*)(SH7751_WCR3)); + mcr = (*(volatile unsigned long*)(SH7751_MCR)); + + bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ + (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1; + + bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ + PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ + PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ + PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ + PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ + PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ + mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; + PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ + + + /* Enable all interrupts, so we know what to fix */ + PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); + PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); + + /* Set up standard PCI config registers */ + PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */ + PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ + PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ + PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ + PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ + PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ + PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ + PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ + PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ + PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ + + /* Now turn it on... */ + PCIC_WRITE(SH7751_PCICR, 0xa5000001); + + /* + * Set PCIMBR and PCIIOBR here, assuming a single window + * (16M MEM, 256K IO) is enough. If a larger space is + * needed, the readx/writex and inx/outx functions will + * have to do more (e.g. setting registers for each call). + */ + + /* + * Set the MBR so PCI address is one-to-one with window, + * meaning all calls go straight through... use BUG_ON to + * catch erroneous assumption. + */ + BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); + + PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM); + + /* Set IOBR for window containing area specified in pci.h */ + PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); + + /* All done, may as well say so... */ + printk("SH7751 PCI: Finished initialization of the PCI controller\n"); + + return 1; +} + +int __init pcibios_map_platform_irq(u8 slot, u8 pin) +{ + switch (slot) { + case 0: return 13; + case 1: return 13; /* AMD Ethernet controller */ + case 2: return -1; + case 3: return -1; + case 4: return -1; + default: + printk("PCI: Bad IRQ mapping request for slot %d\n", slot); + return -1; + } +} + +static struct resource sh7751_io_resource = { + .name = "SH7751 IO", + .start = SH7751_PCI_IO_BASE, + .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751 mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops sh7751_pci_ops; + +struct pci_channel board_pci_channels[] = { + { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; + diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c new file mode 100644 index 00000000000..9d111bb884f --- /dev/null +++ b/arch/sh/boards/se/7751/setup.c @@ -0,0 +1,228 @@ +/* + * linux/arch/sh/kernel/setup_7751se.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <asm/io.h> +#include <asm/se7751/se7751.h> + +#ifdef CONFIG_SH_KGDB +#include <asm/kgdb.h> +#endif + +/* + * Configure the Super I/O chip + */ +#if 0 +/* Leftover code from regular Solution Engine, for reference. */ +/* The SH7751 Solution Engine has a different SuperIO. */ +static void __init smsc_config(int index, int data) +{ + outb_p(index, INDEX_PORT); + outb_p(data, DATA_PORT); +} + +static void __init init_smsc(void) +{ + outb_p(CONFIG_ENTER, CONFIG_PORT); + outb_p(CONFIG_ENTER, CONFIG_PORT); + + /* FDC */ + smsc_config(CURRENT_LDN_INDEX, LDN_FDC); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ + + /* IDE1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ + + /* AUXIO (GPIO): to use IDE1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); + smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ + smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */ + + /* COM1 */ + smsc_config(CURRENT_LDN_INDEX, LDN_COM1); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IO_BASE_HI_INDEX, 0x03); + smsc_config(IO_BASE_LO_INDEX, 0xf8); + smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */ + + /* COM2 */ + smsc_config(CURRENT_LDN_INDEX, LDN_COM2); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IO_BASE_HI_INDEX, 0x02); + smsc_config(IO_BASE_LO_INDEX, 0xf8); + smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */ + + /* RTC */ + smsc_config(CURRENT_LDN_INDEX, LDN_RTC); + smsc_config(ACTIVATE_INDEX, 0x01); + smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */ + + /* XXX: PARPORT, KBD, and MOUSE will come here... */ + outb_p(CONFIG_EXIT, CONFIG_PORT); +} +#endif + +const char *get_system_type(void) +{ + return "7751 SolutionEngine"; +} + +#ifdef CONFIG_SH_KGDB +static int kgdb_uart_setup(void); +static struct kgdb_sermap kgdb_uart_sermap = +{ "ttyS", 0, kgdb_uart_setup, NULL }; +#endif + +/* + * Initialize the board + */ +void __init platform_setup(void) +{ + /* Call init_smsc() replacement to set up SuperIO. */ + /* XXX: RTC setting comes here */ +#ifdef CONFIG_SH_KGDB + kgdb_register_sermap(&kgdb_uart_sermap); +#endif +} + +/********************************************************************* + * Currently a hack (e.g. does not interact well w/serial.c, lots of * + * hardcoded stuff) but may be useful if SCI/F needs debugging. * + * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and * + * arch/i386/lib/kgdb_serial.c). * + *********************************************************************/ + +#ifdef CONFIG_SH_KGDB +#include <linux/types.h> +#include <linux/serial.h> +#include <linux/serialP.h> +#include <linux/serial_reg.h> + +#define COM1_PORT 0x3f8 /* Base I/O address */ +#define COM1_IRQ 4 /* IRQ not used yet */ +#define COM2_PORT 0x2f8 /* Base I/O address */ +#define COM2_IRQ 3 /* IRQ not used yet */ + +#define SB_CLOCK 1843200 /* Serial baud clock */ +#define SB_BASE (SB_CLOCK/16) +#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS + +struct uart_port { + int base; +}; +#define UART_NPORTS 2 +struct uart_port uart_ports[] = { + { COM1_PORT }, + { COM2_PORT }, +}; +struct uart_port *kgdb_uart_port; + +#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg) +#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg) + +/* Basic read/write functions for the UART */ +#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE) +static int kgdb_uart_getchar(void) +{ + int lsr; + int c = -1; + + while (c == -1) { + lsr = UART_IN(UART_LSR); + if (lsr & UART_LSR_DR) + c = UART_IN(UART_RX); + if ((lsr & UART_LSR_RXCERR)) + c = -1; + } + return c; +} + +static void kgdb_uart_putchar(int c) +{ + while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0) + ; + UART_OUT(UART_TX, c); +} + +/* + * Initialize UART to configured/requested values. + * (But we don't interrupts yet, or interact w/serial.c) + */ +static int kgdb_uart_setup(void) +{ + int port; + int lcr = 0; + int bdiv = 0; + + if (kgdb_portnum >= UART_NPORTS) { + KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum); + return -1; + } + + kgdb_uart_port = &uart_ports[kgdb_portnum]; + + /* Init sequence from gdb_hook_interrupt */ + UART_IN(UART_RX); + UART_OUT(UART_IER, 0); + + UART_IN(UART_RX); /* Serial driver comments say */ + UART_IN(UART_IIR); /* this clears interrupt regs */ + UART_IN(UART_MSR); + + /* Figure basic LCR values */ + switch (kgdb_bits) { + case '7': + lcr |= UART_LCR_WLEN7; + break; + default: case '8': + lcr |= UART_LCR_WLEN8; + break; + } + switch (kgdb_parity) { + case 'O': + lcr |= UART_LCR_PARITY; + break; + case 'E': + lcr |= (UART_LCR_PARITY | UART_LCR_EPAR); + break; + default: break; + } + + /* Figure the baud rate divisor */ + bdiv = (SB_BASE/kgdb_baud); + + /* Set the baud rate and LCR values */ + UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB)); + UART_OUT(UART_DLL, (bdiv & 0xff)); + UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff)); + UART_OUT(UART_LCR, lcr); + + /* Set the MCR */ + UART_OUT(UART_MCR, SB_MCR); + + /* Turn off FIFOs for now */ + UART_OUT(UART_FCR, 0); + + /* Setup complete: initialize function pointers */ + kgdb_getchar = kgdb_uart_getchar; + kgdb_putchar = kgdb_uart_putchar; + + return 0; +} +#endif /* CONFIG_SH_KGDB */ |