Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 155 insertions, 0 deletions

diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
new file mode 100644
index 00000000000..c1669905abe
--- /dev/null
+++ b/arch/sh/drivers/pci/pci.c
@@ -0,0 +1,155 @@
+/* arch/sh/kernel/pci.c
+ * $Id: pci.c,v 1.1 2003/08/24 19:15:45 lethal Exp $
+ *
+ * Copyright (c) 2002 M. R. Brown  <mrbrown@linux-sh.org>
+ * 
+ * 
+ * These functions are collected here to reduce duplication of common
+ * code amongst the many platform-specific PCI support code files.
+ * 
+ * These routines require the following board-specific routines:
+ * void pcibios_fixup_irqs();
+ *
+ * See include/asm-sh/pci.h for more information.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+static int __init pcibios_init(void)
+{
+	struct pci_channel *p;
+	struct pci_bus *bus;
+	int busno;
+
+#ifdef CONFIG_PCI_AUTO
+	/* assign resources */
+	busno = 0;
+	for (p = board_pci_channels; p->pci_ops != NULL; p++) {
+		busno = pciauto_assign_resources(busno, p) + 1;
+	}
+#endif
+
+	/* scan the buses */
+	busno = 0;
+	for (p= board_pci_channels; p->pci_ops != NULL; p++) {
+		bus = pci_scan_bus(busno, p->pci_ops, p);
+		busno = bus->subordinate+1;
+	}
+
+	/* board-specific fixups */
+	pcibios_fixup_irqs();
+
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+void
+pcibios_update_resource(struct pci_dev *dev, struct resource *root,
+			struct resource *res, int resource)
+{
+	u32 new, check;
+	int reg;
+
+	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
+	if (resource < 6) {
+		reg = PCI_BASE_ADDRESS_0 + 4*resource;
+	} else if (resource == PCI_ROM_RESOURCE) {
+		res->flags |= IORESOURCE_ROM_ENABLE;
+		new |= PCI_ROM_ADDRESS_ENABLE;
+		reg = dev->rom_base_reg;
+	} else {
+		/* Somebody might have asked allocation of a non-standard resource */
+		return;
+	}
+	
+	pci_write_config_dword(dev, reg, new);
+	pci_read_config_dword(dev, reg, &check);
+	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
+		printk(KERN_ERR "PCI: Error while updating region "
+		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
+		       new, check);
+	}
+}
+
+void pcibios_align_resource(void *data, struct resource *res,
+			    unsigned long size, unsigned long align)
+			    __attribute__ ((weak));
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+			    unsigned long size, unsigned long align)
+{
+	if (res->flags & IORESOURCE_IO) {
+		unsigned long start = res->start;
+
+		if (start & 0x300) {
+			start = (start + 0x3ff) & ~0x3ff;
+			res->start = start;
+		}
+	}
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for(idx=0; idx<6; idx++) {
+		if (!(mask & (1 << idx)))
+			continue;
+		r = &dev->resource[idx];
+		if (!r->start && r->end) {
+			printk(KERN_ERR "PCI: Device %s not available because "
+			       "of resource collisions\n", pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (dev->resource[PCI_ROM_RESOURCE].start)
+		cmd |= PCI_COMMAND_MEMORY;
+	if (cmd != old_cmd) {
+		printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n",
+		       pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+/*
+ *  If we set up a device for bus mastering, we need to check and set
+ *  the latency timer as it may not be properly set.
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+	u8 lat;
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+	if (lat < 16)
+		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+	else if (lat > pcibios_max_latency)
+		lat = pcibios_max_latency;
+	else
+		return;
+	printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}