aboutsummaryrefslogtreecommitdiff
path: root/arch/frv/kernel/setup.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/frv/kernel/setup.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/frv/kernel/setup.c')
-rw-r--r--arch/frv/kernel/setup.c1194
1 files changed, 1194 insertions, 0 deletions
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
new file mode 100644
index 00000000000..ef6865f0b97
--- /dev/null
+++ b/arch/frv/kernel/setup.c
@@ -0,0 +1,1194 @@
+/* setup.c: FRV specific setup
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68k/kernel/setup.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/genhd.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/major.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+#include <asm/setup.h>
+#include <asm/serial.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/pgalloc.h>
+#include <asm/busctl-regs.h>
+#include <asm/serial-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/irc-regs.h>
+#include <asm/spr-regs.h>
+#include <asm/mb-regs.h>
+#include <asm/mb93493-regs.h>
+#include <asm/gdb-stub.h>
+#include <asm/irq-routing.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#include <linux/blk.h>
+#include <asm/pgtable.h>
+#endif
+
+#include "local.h"
+
+#ifdef CONFIG_MB93090_MB00
+static void __init mb93090_display(void);
+#endif
+#ifdef CONFIG_MMU
+static void __init setup_linux_memory(void);
+#else
+static void __init setup_uclinux_memory(void);
+#endif
+
+#ifdef CONFIG_CONSOLE
+extern struct consw *conswitchp;
+#endif
+
+#ifdef CONFIG_MB93090_MB00
+static char __initdata mb93090_banner[] = "FJ/RH FR-V Linux";
+static char __initdata mb93090_version[] = UTS_RELEASE;
+
+int __nongprelbss mb93090_mb00_detected;
+#endif
+
+const char __frv_unknown_system[] = "unknown";
+const char __frv_mb93091_cb10[] = "mb93091-cb10";
+const char __frv_mb93091_cb11[] = "mb93091-cb11";
+const char __frv_mb93091_cb30[] = "mb93091-cb30";
+const char __frv_mb93091_cb41[] = "mb93091-cb41";
+const char __frv_mb93091_cb60[] = "mb93091-cb60";
+const char __frv_mb93091_cb70[] = "mb93091-cb70";
+const char __frv_mb93091_cb451[] = "mb93091-cb451";
+const char __frv_mb93090_mb00[] = "mb93090-mb00";
+
+const char __frv_mb93493[] = "mb93493";
+
+const char __frv_mb93093[] = "mb93093";
+
+static const char *__nongprelbss cpu_series;
+static const char *__nongprelbss cpu_core;
+static const char *__nongprelbss cpu_silicon;
+static const char *__nongprelbss cpu_mmu;
+static const char *__nongprelbss cpu_system;
+static const char *__nongprelbss cpu_board1;
+static const char *__nongprelbss cpu_board2;
+
+static unsigned long __nongprelbss cpu_psr_all;
+static unsigned long __nongprelbss cpu_hsr0_all;
+
+unsigned long __nongprelbss pdm_suspend_mode;
+
+unsigned long __nongprelbss rom_length;
+unsigned long __nongprelbss memory_start;
+unsigned long __nongprelbss memory_end;
+
+unsigned long __nongprelbss dma_coherent_mem_start;
+unsigned long __nongprelbss dma_coherent_mem_end;
+
+unsigned long __initdata __sdram_old_base;
+unsigned long __initdata num_mappedpages;
+
+struct cpuinfo_frv __nongprelbss boot_cpu_data;
+
+char command_line[COMMAND_LINE_SIZE];
+char __initdata redboot_command_line[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_PM
+#define __pminit
+#define __pminitdata
+#else
+#define __pminit __init
+#define __pminitdata __initdata
+#endif
+
+struct clock_cmode {
+ uint8_t xbus, sdram, corebus, core, dsu;
+};
+
+#define _frac(N,D) ((N)<<4 | (D))
+#define _x0_16 _frac(1,6)
+#define _x0_25 _frac(1,4)
+#define _x0_33 _frac(1,3)
+#define _x0_375 _frac(3,8)
+#define _x0_5 _frac(1,2)
+#define _x0_66 _frac(2,3)
+#define _x0_75 _frac(3,4)
+#define _x1 _frac(1,1)
+#define _x1_5 _frac(3,2)
+#define _x2 _frac(2,1)
+#define _x3 _frac(3,1)
+#define _x4 _frac(4,1)
+#define _x4_5 _frac(9,2)
+#define _x6 _frac(6,1)
+#define _x8 _frac(8,1)
+#define _x9 _frac(9,1)
+
+int __nongprelbss clock_p0_current;
+int __nongprelbss clock_cm_current;
+int __nongprelbss clock_cmode_current;
+#ifdef CONFIG_PM
+int __nongprelbss clock_cmodes_permitted;
+unsigned long __nongprelbss clock_bits_settable;
+#endif
+
+static struct clock_cmode __pminitdata undef_clock_cmode = { _x1, _x1, _x1, _x1, _x1 };
+
+static struct clock_cmode __pminitdata clock_cmodes_fr401_fr403[16] = {
+ [4] = { _x1, _x1, _x2, _x2, _x0_25 },
+ [5] = { _x1, _x2, _x4, _x4, _x0_5 },
+ [8] = { _x1, _x1, _x1, _x2, _x0_25 },
+ [9] = { _x1, _x2, _x2, _x4, _x0_5 },
+ [11] = { _x1, _x4, _x4, _x8, _x1 },
+ [12] = { _x1, _x1, _x2, _x4, _x0_5 },
+ [13] = { _x1, _x2, _x4, _x8, _x1 },
+};
+
+static struct clock_cmode __pminitdata clock_cmodes_fr405[16] = {
+ [0] = { _x1, _x1, _x1, _x1, _x0_5 },
+ [1] = { _x1, _x1, _x1, _x3, _x0_25 },
+ [2] = { _x1, _x1, _x2, _x6, _x0_5 },
+ [3] = { _x1, _x2, _x2, _x6, _x0_5 },
+ [4] = { _x1, _x1, _x2, _x2, _x0_16 },
+ [8] = { _x1, _x1, _x1, _x2, _x0_16 },
+ [9] = { _x1, _x2, _x2, _x4, _x0_33 },
+ [12] = { _x1, _x1, _x2, _x4, _x0_33 },
+ [14] = { _x1, _x3, _x3, _x9, _x0_75 },
+ [15] = { _x1, _x1_5, _x1_5, _x4_5, _x0_375 },
+
+#define CLOCK_CMODES_PERMITTED_FR405 0xd31f
+};
+
+static struct clock_cmode __pminitdata clock_cmodes_fr555[16] = {
+ [0] = { _x1, _x2, _x2, _x4, _x0_33 },
+ [1] = { _x1, _x3, _x3, _x6, _x0_5 },
+ [2] = { _x1, _x2, _x4, _x8, _x0_66 },
+ [3] = { _x1, _x1_5, _x3, _x6, _x0_5 },
+ [4] = { _x1, _x3, _x3, _x9, _x0_75 },
+ [5] = { _x1, _x2, _x2, _x6, _x0_5 },
+ [6] = { _x1, _x1_5, _x1_5, _x4_5, _x0_375 },
+};
+
+static const struct clock_cmode __pminitdata *clock_cmodes;
+static int __pminitdata clock_doubled;
+
+static struct uart_port __initdata __frv_uart0 = {
+ .uartclk = 0,
+ .membase = (char *) UART0_BASE,
+ .irq = IRQ_CPU_UART0,
+ .regshift = 3,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+};
+
+static struct uart_port __initdata __frv_uart1 = {
+ .uartclk = 0,
+ .membase = (char *) UART1_BASE,
+ .irq = IRQ_CPU_UART1,
+ .regshift = 3,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+};
+
+#if 0
+static void __init printk_xampr(unsigned long ampr, unsigned long amlr, char i_d, int n)
+{
+ unsigned long phys, virt, cxn, size;
+
+#ifdef CONFIG_MMU
+ virt = amlr & 0xffffc000;
+ cxn = amlr & 0x3fff;
+#else
+ virt = ampr & 0xffffc000;
+ cxn = 0;
+#endif
+ phys = ampr & xAMPRx_PPFN;
+ size = 1 << (((ampr & xAMPRx_SS) >> 4) + 17);
+
+ printk("%cAMPR%d: va %08lx-%08lx [pa %08lx] %c%c%c%c [cxn:%04lx]\n",
+ i_d, n,
+ virt, virt + size - 1,
+ phys,
+ ampr & xAMPRx_S ? 'S' : '-',
+ ampr & xAMPRx_C ? 'C' : '-',
+ ampr & DAMPRx_WP ? 'W' : '-',
+ ampr & xAMPRx_V ? 'V' : '-',
+ cxn
+ );
+}
+#endif
+
+/*****************************************************************************/
+/*
+ * dump the memory map
+ */
+static void __init dump_memory_map(void)
+{
+
+#if 0
+ /* dump the protection map */
+ printk_xampr(__get_IAMPR(0), __get_IAMLR(0), 'I', 0);
+ printk_xampr(__get_IAMPR(1), __get_IAMLR(1), 'I', 1);
+ printk_xampr(__get_IAMPR(2), __get_IAMLR(2), 'I', 2);
+ printk_xampr(__get_IAMPR(3), __get_IAMLR(3), 'I', 3);
+ printk_xampr(__get_IAMPR(4), __get_IAMLR(4), 'I', 4);
+ printk_xampr(__get_IAMPR(5), __get_IAMLR(5), 'I', 5);
+ printk_xampr(__get_IAMPR(6), __get_IAMLR(6), 'I', 6);
+ printk_xampr(__get_IAMPR(7), __get_IAMLR(7), 'I', 7);
+ printk_xampr(__get_IAMPR(8), __get_IAMLR(8), 'I', 8);
+ printk_xampr(__get_IAMPR(9), __get_IAMLR(9), 'i', 9);
+ printk_xampr(__get_IAMPR(10), __get_IAMLR(10), 'I', 10);
+ printk_xampr(__get_IAMPR(11), __get_IAMLR(11), 'I', 11);
+ printk_xampr(__get_IAMPR(12), __get_IAMLR(12), 'I', 12);
+ printk_xampr(__get_IAMPR(13), __get_IAMLR(13), 'I', 13);
+ printk_xampr(__get_IAMPR(14), __get_IAMLR(14), 'I', 14);
+ printk_xampr(__get_IAMPR(15), __get_IAMLR(15), 'I', 15);
+
+ printk_xampr(__get_DAMPR(0), __get_DAMLR(0), 'D', 0);
+ printk_xampr(__get_DAMPR(1), __get_DAMLR(1), 'D', 1);
+ printk_xampr(__get_DAMPR(2), __get_DAMLR(2), 'D', 2);
+ printk_xampr(__get_DAMPR(3), __get_DAMLR(3), 'D', 3);
+ printk_xampr(__get_DAMPR(4), __get_DAMLR(4), 'D', 4);
+ printk_xampr(__get_DAMPR(5), __get_DAMLR(5), 'D', 5);
+ printk_xampr(__get_DAMPR(6), __get_DAMLR(6), 'D', 6);
+ printk_xampr(__get_DAMPR(7), __get_DAMLR(7), 'D', 7);
+ printk_xampr(__get_DAMPR(8), __get_DAMLR(8), 'D', 8);
+ printk_xampr(__get_DAMPR(9), __get_DAMLR(9), 'D', 9);
+ printk_xampr(__get_DAMPR(10), __get_DAMLR(10), 'D', 10);
+ printk_xampr(__get_DAMPR(11), __get_DAMLR(11), 'D', 11);
+ printk_xampr(__get_DAMPR(12), __get_DAMLR(12), 'D', 12);
+ printk_xampr(__get_DAMPR(13), __get_DAMLR(13), 'D', 13);
+ printk_xampr(__get_DAMPR(14), __get_DAMLR(14), 'D', 14);
+ printk_xampr(__get_DAMPR(15), __get_DAMLR(15), 'D', 15);
+#endif
+
+#if 0
+ /* dump the bus controller registers */
+ printk("LGCR: %08lx\n", __get_LGCR());
+ printk("Master: %08lx-%08lx CR=%08lx\n",
+ __get_LEMBR(), __get_LEMBR() + __get_LEMAM(),
+ __get_LMAICR());
+
+ int loop;
+ for (loop = 1; loop <= 7; loop++) {
+ unsigned long lcr = __get_LCR(loop), lsbr = __get_LSBR(loop);
+ printk("CS#%d: %08lx-%08lx %c%c%c%c%c%c%c%c%c\n",
+ loop,
+ lsbr, lsbr + __get_LSAM(loop),
+ lcr & 0x80000000 ? 'r' : '-',
+ lcr & 0x40000000 ? 'w' : '-',
+ lcr & 0x08000000 ? 'b' : '-',
+ lcr & 0x04000000 ? 'B' : '-',
+ lcr & 0x02000000 ? 'C' : '-',
+ lcr & 0x01000000 ? 'D' : '-',
+ lcr & 0x00800000 ? 'W' : '-',
+ lcr & 0x00400000 ? 'R' : '-',
+ (lcr & 0x00030000) == 0x00000000 ? '4' :
+ (lcr & 0x00030000) == 0x00010000 ? '2' :
+ (lcr & 0x00030000) == 0x00020000 ? '1' :
+ '-'
+ );
+ }
+#endif
+
+#if 0
+ printk("\n");
+#endif
+} /* end dump_memory_map() */
+
+/*****************************************************************************/
+/*
+ * attempt to detect a VDK motherboard and DAV daughter board on an MB93091 system
+ */
+#ifdef CONFIG_MB93091_VDK
+static void __init detect_mb93091(void)
+{
+#ifdef CONFIG_MB93090_MB00
+ /* Detect CB70 without motherboard */
+ if (!(cpu_system == __frv_mb93091_cb70 && ((*(unsigned short *)0xffc00030) & 0x100))) {
+ cpu_board1 = __frv_mb93090_mb00;
+ mb93090_mb00_detected = 1;
+ }
+#endif
+
+#ifdef CONFIG_FUJITSU_MB93493
+ cpu_board2 = __frv_mb93493;
+#endif
+
+} /* end detect_mb93091() */
+#endif
+
+/*****************************************************************************/
+/*
+ * determine the CPU type and set appropriate parameters
+ *
+ * Family Series CPU Core Silicon Imple Vers
+ * ----------------------------------------------------------
+ * FR-V --+-> FR400 --+-> FR401 --+-> MB93401 02 00 [1]
+ * | | |
+ * | | +-> MB93401/A 02 01
+ * | | |
+ * | | +-> MB93403 02 02
+ * | |
+ * | +-> FR405 ----> MB93405 04 00
+ * |
+ * +-> FR450 ----> FR451 ----> MB93451 05 00
+ * |
+ * +-> FR500 ----> FR501 --+-> MB93501 01 01 [2]
+ * | |
+ * | +-> MB93501/A 01 02
+ * |
+ * +-> FR550 --+-> FR551 ----> MB93555 03 01
+ *
+ * [1] The MB93401 is an obsolete CPU replaced by the MB93401A
+ * [2] The MB93501 is an obsolete CPU replaced by the MB93501A
+ *
+ * Imple is PSR(Processor Status Register)[31:28].
+ * Vers is PSR(Processor Status Register)[27:24].
+ *
+ * A "Silicon" consists of CPU core and some on-chip peripherals.
+ */
+static void __init determine_cpu(void)
+{
+ unsigned long hsr0 = __get_HSR(0);
+ unsigned long psr = __get_PSR();
+
+ /* work out what selectable services the CPU supports */
+ __set_PSR(psr | PSR_EM | PSR_EF | PSR_CM | PSR_NEM);
+ cpu_psr_all = __get_PSR();
+ __set_PSR(psr);
+
+ __set_HSR(0, hsr0 | HSR0_GRLE | HSR0_GRHE | HSR0_FRLE | HSR0_FRHE);
+ cpu_hsr0_all = __get_HSR(0);
+ __set_HSR(0, hsr0);
+
+ /* derive other service specs from the CPU type */
+ cpu_series = "unknown";
+ cpu_core = "unknown";
+ cpu_silicon = "unknown";
+ cpu_mmu = "Prot";
+ cpu_system = __frv_unknown_system;
+ clock_cmodes = NULL;
+ clock_doubled = 0;
+#ifdef CONFIG_PM
+ clock_bits_settable = CLOCK_BIT_CM_H | CLOCK_BIT_CM_M | CLOCK_BIT_P0;
+#endif
+
+ switch (PSR_IMPLE(psr)) {
+ case PSR_IMPLE_FR401:
+ cpu_series = "fr400";
+ cpu_core = "fr401";
+ pdm_suspend_mode = HSR0_PDM_PLL_RUN;
+
+ switch (PSR_VERSION(psr)) {
+ case PSR_VERSION_FR401_MB93401:
+ cpu_silicon = "mb93401";
+ cpu_system = __frv_mb93091_cb10;
+ clock_cmodes = clock_cmodes_fr401_fr403;
+ clock_doubled = 1;
+ break;
+ case PSR_VERSION_FR401_MB93401A:
+ cpu_silicon = "mb93401/A";
+ cpu_system = __frv_mb93091_cb11;
+ clock_cmodes = clock_cmodes_fr401_fr403;
+ break;
+ case PSR_VERSION_FR401_MB93403:
+ cpu_silicon = "mb93403";
+#ifndef CONFIG_MB93093_PDK
+ cpu_system = __frv_mb93091_cb30;
+#else
+ cpu_system = __frv_mb93093;
+#endif
+ clock_cmodes = clock_cmodes_fr401_fr403;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case PSR_IMPLE_FR405:
+ cpu_series = "fr400";
+ cpu_core = "fr405";
+ pdm_suspend_mode = HSR0_PDM_PLL_STOP;
+
+ switch (PSR_VERSION(psr)) {
+ case PSR_VERSION_FR405_MB93405:
+ cpu_silicon = "mb93405";
+ cpu_system = __frv_mb93091_cb60;
+ clock_cmodes = clock_cmodes_fr405;
+#ifdef CONFIG_PM
+ clock_bits_settable |= CLOCK_BIT_CMODE;
+ clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405;
+#endif
+
+ /* the FPGA on the CB70 has extra registers
+ * - it has 0x0046 in the VDK_ID FPGA register at 0x1a0, which is
+ * how we tell the difference between it and a CB60
+ */
+ if (*(volatile unsigned short *) 0xffc001a0 == 0x0046)
+ cpu_system = __frv_mb93091_cb70;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case PSR_IMPLE_FR451:
+ cpu_series = "fr450";
+ cpu_core = "fr451";
+ pdm_suspend_mode = HSR0_PDM_PLL_STOP;
+#ifdef CONFIG_PM
+ clock_bits_settable |= CLOCK_BIT_CMODE;
+ clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405;
+#endif
+ switch (PSR_VERSION(psr)) {
+ case PSR_VERSION_FR451_MB93451:
+ cpu_silicon = "mb93451";
+ cpu_mmu = "Prot, SAT, xSAT, DAT";
+ cpu_system = __frv_mb93091_cb451;
+ clock_cmodes = clock_cmodes_fr405;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case PSR_IMPLE_FR501:
+ cpu_series = "fr500";
+ cpu_core = "fr501";
+ pdm_suspend_mode = HSR0_PDM_PLL_STOP;
+
+ switch (PSR_VERSION(psr)) {
+ case PSR_VERSION_FR501_MB93501: cpu_silicon = "mb93501"; break;
+ case PSR_VERSION_FR501_MB93501A: cpu_silicon = "mb93501/A"; break;
+ default:
+ break;
+ }
+ break;
+
+ case PSR_IMPLE_FR551:
+ cpu_series = "fr550";
+ cpu_core = "fr551";
+ pdm_suspend_mode = HSR0_PDM_PLL_RUN;
+
+ switch (PSR_VERSION(psr)) {
+ case PSR_VERSION_FR551_MB93555:
+ cpu_silicon = "mb93555";
+ cpu_mmu = "Prot, SAT";
+ cpu_system = __frv_mb93091_cb41;
+ clock_cmodes = clock_cmodes_fr555;
+ clock_doubled = 1;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ printk("- Series:%s CPU:%s Silicon:%s\n",
+ cpu_series, cpu_core, cpu_silicon);
+
+#ifdef CONFIG_MB93091_VDK
+ detect_mb93091();
+#endif
+
+#if defined(CONFIG_MB93093_PDK) && defined(CONFIG_FUJITSU_MB93493)
+ cpu_board2 = __frv_mb93493;
+#endif
+
+} /* end determine_cpu() */
+
+/*****************************************************************************/
+/*
+ * calculate the bus clock speed
+ */
+void __pminit determine_clocks(int verbose)
+{
+ const struct clock_cmode *mode, *tmode;
+ unsigned long clkc, psr, quot;
+
+ clkc = __get_CLKC();
+ psr = __get_PSR();
+
+ clock_p0_current = !!(clkc & CLKC_P0);
+ clock_cm_current = clkc & CLKC_CM;
+ clock_cmode_current = (clkc & CLKC_CMODE) >> CLKC_CMODE_s;
+
+ if (verbose)
+ printk("psr=%08lx hsr0=%08lx clkc=%08lx\n", psr, __get_HSR(0), clkc);
+
+ /* the CB70 has some alternative ways of setting the clock speed through switches accessed
+ * through the FPGA. */
+ if (cpu_system == __frv_mb93091_cb70) {
+ unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL;
+
+ if (clkswr & 0x1000)
+ __clkin_clock_speed_HZ = 60000000UL;
+ else
+ __clkin_clock_speed_HZ =
+ ((clkswr >> 8) & 0xf) * 10000000 +
+ ((clkswr >> 4) & 0xf) * 1000000 +
+ ((clkswr ) & 0xf) * 100000;
+ }
+ /* the FR451 is currently fixed at 24MHz */
+ else if (cpu_system == __frv_mb93091_cb451) {
+ //__clkin_clock_speed_HZ = 24000000UL; // CB451-FPGA
+ unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL;
+
+ if (clkswr & 0x1000)
+ __clkin_clock_speed_HZ = 60000000UL;
+ else
+ __clkin_clock_speed_HZ =
+ ((clkswr >> 8) & 0xf) * 10000000 +
+ ((clkswr >> 4) & 0xf) * 1000000 +
+ ((clkswr ) & 0xf) * 100000;
+ }
+ /* otherwise determine the clockspeed from VDK or other registers */
+ else {
+ __clkin_clock_speed_HZ = __get_CLKIN();
+ }
+
+ /* look up the appropriate clock relationships table entry */
+ mode = &undef_clock_cmode;
+ if (clock_cmodes) {
+ tmode = &clock_cmodes[(clkc & CLKC_CMODE) >> CLKC_CMODE_s];
+ if (tmode->xbus)
+ mode = tmode;
+ }
+
+#define CLOCK(SRC,RATIO) ((SRC) * (((RATIO) >> 4) & 0x0f) / ((RATIO) & 0x0f))
+
+ if (clock_doubled)
+ __clkin_clock_speed_HZ <<= 1;
+
+ __ext_bus_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->xbus);
+ __sdram_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->sdram);
+ __dsu_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->dsu);
+
+ switch (clkc & CLKC_CM) {
+ case 0: /* High */
+ __core_bus_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->corebus);
+ __core_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->core);
+ break;
+ case 1: /* Medium */
+ __core_bus_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->sdram);
+ __core_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->sdram);
+ break;
+ case 2: /* Low; not supported */
+ case 3: /* UNDEF */
+ printk("Unsupported CLKC CM %ld\n", clkc & CLKC_CM);
+ panic("Bye");
+ }
+
+ __res_bus_clock_speed_HZ = __ext_bus_clock_speed_HZ;
+ if (clkc & CLKC_P0)
+ __res_bus_clock_speed_HZ >>= 1;
+
+ if (verbose) {
+ printk("CLKIN: %lu.%3.3luMHz\n",
+ __clkin_clock_speed_HZ / 1000000,
+ (__clkin_clock_speed_HZ / 1000) % 1000);
+
+ printk("CLKS:"
+ " ext=%luMHz res=%luMHz sdram=%luMHz cbus=%luMHz core=%luMHz dsu=%luMHz\n",
+ __ext_bus_clock_speed_HZ / 1000000,
+ __res_bus_clock_speed_HZ / 1000000,
+ __sdram_clock_speed_HZ / 1000000,
+ __core_bus_clock_speed_HZ / 1000000,
+ __core_clock_speed_HZ / 1000000,
+ __dsu_clock_speed_HZ / 1000000
+ );
+ }
+
+ /* calculate the number of __delay() loop iterations per sec (2 insn loop) */
+ __delay_loops_MHz = __core_clock_speed_HZ / (1000000 * 2);
+
+ /* set the serial prescaler */
+ __serial_clock_speed_HZ = __res_bus_clock_speed_HZ;
+ quot = 1;
+ while (__serial_clock_speed_HZ / quot / 16 / 65536 > 3000)
+ quot += 1;
+
+ /* double the divisor if P0 is clear, so that if/when P0 is set, it's still achievable
+ * - we have to be careful - dividing too much can mean we can't get 115200 baud
+ */
+ if (__serial_clock_speed_HZ > 32000000 && !(clkc & CLKC_P0))
+ quot <<= 1;
+
+ __serial_clock_speed_HZ /= quot;
+ __frv_uart0.uartclk = __serial_clock_speed_HZ;
+ __frv_uart1.uartclk = __serial_clock_speed_HZ;
+
+ if (verbose)
+ printk(" uart=%luMHz\n", __serial_clock_speed_HZ / 1000000 * quot);
+
+ while (!(__get_UART0_LSR() & UART_LSR_TEMT))
+ continue;
+
+ while (!(__get_UART1_LSR() & UART_LSR_TEMT))
+ continue;
+
+ __set_UCPVR(quot);
+ __set_UCPSR(0);
+} /* end determine_clocks() */
+
+/*****************************************************************************/
+/*
+ * reserve some DMA consistent memory
+ */
+#ifdef CONFIG_RESERVE_DMA_COHERENT
+static void __init reserve_dma_coherent(void)
+{
+ unsigned long ampr;
+
+ /* find the first non-kernel memory tile and steal it */
+#define __steal_AMPR(r) \
+ if (__get_DAMPR(r) & xAMPRx_V) { \
+ ampr = __get_DAMPR(r); \
+ __set_DAMPR(r, ampr | xAMPRx_S | xAMPRx_C); \
+ __set_IAMPR(r, 0); \
+ goto found; \
+ }
+
+ __steal_AMPR(1);
+ __steal_AMPR(2);
+ __steal_AMPR(3);
+ __steal_AMPR(4);
+ __steal_AMPR(5);
+ __steal_AMPR(6);
+
+ if (PSR_IMPLE(__get_PSR()) == PSR_IMPLE_FR551) {
+ __steal_AMPR(7);
+ __steal_AMPR(8);
+ __steal_AMPR(9);
+ __steal_AMPR(10);
+ __steal_AMPR(11);
+ __steal_AMPR(12);
+ __steal_AMPR(13);
+ __steal_AMPR(14);
+ }
+
+ /* unable to grant any DMA consistent memory */
+ printk("No DMA consistent memory reserved\n");
+ return;
+
+ found:
+ dma_coherent_mem_start = ampr & xAMPRx_PPFN;
+ ampr &= xAMPRx_SS;
+ ampr >>= 4;
+ ampr = 1 << (ampr - 3 + 20);
+ dma_coherent_mem_end = dma_coherent_mem_start + ampr;
+
+ printk("DMA consistent memory reserved %lx-%lx\n",
+ dma_coherent_mem_start, dma_coherent_mem_end);
+
+} /* end reserve_dma_coherent() */
+#endif
+
+/*****************************************************************************/
+/*
+ * calibrate the delay loop
+ */
+void __init calibrate_delay(void)
+{
+ loops_per_jiffy = __delay_loops_MHz * (1000000 / HZ);
+
+ printk("Calibrating delay loop... %lu.%02lu BogoMIPS\n",
+ loops_per_jiffy / (500000 / HZ),
+ (loops_per_jiffy / (5000 / HZ)) % 100);
+
+} /* end calibrate_delay() */
+
+/*****************************************************************************/
+/*
+ * look through the command line for some things we need to know immediately
+ */
+static void __init parse_cmdline_early(char *cmdline)
+{
+ if (!cmdline)
+ return;
+
+ while (*cmdline) {
+ if (*cmdline == ' ')
+ cmdline++;
+
+ /* "mem=XXX[kKmM]" sets SDRAM size to <mem>, overriding the value we worked
+ * out from the SDRAM controller mask register
+ */
+ if (!memcmp(cmdline, "mem=", 4)) {
+ unsigned long long mem_size;
+
+ mem_size = memparse(cmdline + 4, &cmdline);
+ memory_end = memory_start + mem_size;
+ }
+
+ while (*cmdline && *cmdline != ' ')
+ cmdline++;
+ }
+
+} /* end parse_cmdline_early() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+void __init setup_arch(char **cmdline_p)
+{
+#ifdef CONFIG_MMU
+ printk("Linux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n");
+#else
+ printk("uClinux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n");
+#endif
+
+ memcpy(saved_command_line, redboot_command_line, COMMAND_LINE_SIZE);
+
+ determine_cpu();
+ determine_clocks(1);
+
+ /* For printk-directly-beats-on-serial-hardware hack */
+ console_set_baud(115200);
+#ifdef CONFIG_GDBSTUB
+ gdbstub_set_baud(115200);
+#endif
+
+#ifdef CONFIG_RESERVE_DMA_COHERENT
+ reserve_dma_coherent();
+#endif
+ dump_memory_map();
+
+#ifdef CONFIG_MB93090_MB00
+ if (mb93090_mb00_detected)
+ mb93090_display();
+#endif
+
+ /* register those serial ports that are available */
+#ifndef CONFIG_GDBSTUB_UART0
+ __reg(UART0_BASE + UART_IER * 8) = 0;
+ early_serial_setup(&__frv_uart0);
+// register_serial(&__frv_uart0);
+#endif
+#ifndef CONFIG_GDBSTUB_UART1
+ __reg(UART1_BASE + UART_IER * 8) = 0;
+ early_serial_setup(&__frv_uart1);
+// register_serial(&__frv_uart1);
+#endif
+
+#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
+ /* we need to initialize the Flashrom device here since we might
+ * do things with flash early on in the boot
+ */
+ flash_probe();
+#endif
+
+ /* deal with the command line - RedBoot may have passed one to the kernel */
+ memcpy(command_line, saved_command_line, sizeof(command_line));
+ *cmdline_p = &command_line[0];
+ parse_cmdline_early(command_line);
+
+ /* set up the memory description
+ * - by now the stack is part of the init task */
+ printk("Memory %08lx-%08lx\n", memory_start, memory_end);
+
+ if (memory_start == memory_end) BUG();
+
+ init_mm.start_code = (unsigned long) &_stext;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+#if 0 /* DAVIDM - don't set brk just incase someone decides to use it */
+ init_mm.brk = (unsigned long) &_end;
+#else
+ init_mm.brk = (unsigned long) 0;
+#endif
+
+#ifdef DEBUG
+ printk("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x BSS=0x%06x-0x%06x\n",
+ (int) &_stext, (int) &_etext,
+ (int) &_sdata, (int) &_edata,
+ (int) &_sbss, (int) &_ebss);
+#endif
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+
+#ifdef CONFIG_BLK_DEV_BLKMEM
+ ROOT_DEV = MKDEV(BLKMEM_MAJOR,0);
+#endif
+ /*rom_length = (unsigned long)&_flashend - (unsigned long)&_romvec;*/
+
+#ifdef CONFIG_MMU
+ setup_linux_memory();
+#else
+ setup_uclinux_memory();
+#endif
+
+ /* get kmalloc into gear */
+ paging_init();
+
+ /* init DMA */
+ frv_dma_init();
+#ifdef DEBUG
+ printk("Done setup_arch\n");
+#endif
+
+ /* start the decrement timer running */
+// asm volatile("movgs %0,timerd" :: "r"(10000000));
+// __set_HSR(0, __get_HSR(0) | HSR0_ETMD);
+
+} /* end setup_arch() */
+
+#if 0
+/*****************************************************************************/
+/*
+ *
+ */
+static int __devinit setup_arch_serial(void)
+{
+ /* register those serial ports that are available */
+#ifndef CONFIG_GDBSTUB_UART0
+ early_serial_setup(&__frv_uart0);
+#endif
+#ifndef CONFIG_GDBSTUB_UART1
+ early_serial_setup(&__frv_uart1);
+#endif
+
+ return 0;
+} /* end setup_arch_serial() */
+
+late_initcall(setup_arch_serial);
+#endif
+
+/*****************************************************************************/
+/*
+ * set up the memory map for normal MMU linux
+ */
+#ifdef CONFIG_MMU
+static void __init setup_linux_memory(void)
+{
+ unsigned long bootmap_size, low_top_pfn, kstart, kend, high_mem;
+
+ kstart = (unsigned long) &__kernel_image_start - PAGE_OFFSET;
+ kend = (unsigned long) &__kernel_image_end - PAGE_OFFSET;
+
+ kstart = kstart & PAGE_MASK;
+ kend = (kend + PAGE_SIZE - 1) & PAGE_MASK;
+
+ /* give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map immediately following the kernel image
+ */
+ bootmap_size = init_bootmem_node(NODE_DATA(0),
+ kend >> PAGE_SHIFT, /* map addr */
+ memory_start >> PAGE_SHIFT, /* start of RAM */
+ memory_end >> PAGE_SHIFT /* end of RAM */
+ );
+
+ /* pass the memory that the kernel can immediately use over to the bootmem allocator */
+ max_mapnr = num_physpages = (memory_end - memory_start) >> PAGE_SHIFT;
+ low_top_pfn = (KERNEL_LOWMEM_END - KERNEL_LOWMEM_START) >> PAGE_SHIFT;
+ high_mem = 0;
+
+ if (num_physpages > low_top_pfn) {
+#ifdef CONFIG_HIGHMEM
+ high_mem = num_physpages - low_top_pfn;
+#else
+ max_mapnr = num_physpages = low_top_pfn;
+#endif
+ }
+ else {
+ low_top_pfn = num_physpages;
+ }
+
+ min_low_pfn = memory_start >> PAGE_SHIFT;
+ max_low_pfn = low_top_pfn;
+ max_pfn = memory_end >> PAGE_SHIFT;
+
+ num_mappedpages = low_top_pfn;
+
+ printk(KERN_NOTICE "%ldMB LOWMEM available.\n", low_top_pfn >> (20 - PAGE_SHIFT));
+
+ free_bootmem(memory_start, low_top_pfn << PAGE_SHIFT);
+
+#ifdef CONFIG_HIGHMEM
+ if (high_mem)
+ printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", high_mem >> (20 - PAGE_SHIFT));
+#endif
+
+ /* take back the memory occupied by the kernel image and the bootmem alloc map */
+ reserve_bootmem(kstart, kend - kstart + bootmap_size);
+
+ /* reserve the memory occupied by the initial ramdisk */
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (LOADER_TYPE && INITRD_START) {
+ if (INITRD_START + INITRD_SIZE <= (low_top_pfn << PAGE_SHIFT)) {
+ reserve_bootmem(INITRD_START, INITRD_SIZE);
+ initrd_start = INITRD_START ? INITRD_START + PAGE_OFFSET : 0;
+ initrd_end = initrd_start + INITRD_SIZE;
+ }
+ else {
+ printk(KERN_ERR
+ "initrd extends beyond end of memory (0x%08lx > 0x%08lx)\n"
+ "disabling initrd\n",
+ INITRD_START + INITRD_SIZE,
+ low_top_pfn << PAGE_SHIFT);
+ initrd_start = 0;
+ }
+ }
+#endif
+
+} /* end setup_linux_memory() */
+#endif
+
+/*****************************************************************************/
+/*
+ * set up the memory map for uClinux
+ */
+#ifndef CONFIG_MMU
+static void __init setup_uclinux_memory(void)
+{
+#ifdef CONFIG_PROTECT_KERNEL
+ unsigned long dampr;
+#endif
+ unsigned long kend;
+ int bootmap_size;
+
+ kend = (unsigned long) &__kernel_image_end;
+ kend = (kend + PAGE_SIZE - 1) & PAGE_MASK;
+
+ /* give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map immediately following the kernel image
+ */
+ bootmap_size = init_bootmem_node(NODE_DATA(0),
+ kend >> PAGE_SHIFT, /* map addr */
+ memory_start >> PAGE_SHIFT, /* start of RAM */
+ memory_end >> PAGE_SHIFT /* end of RAM */
+ );
+
+ /* free all the usable memory */
+ free_bootmem(memory_start, memory_end - memory_start);
+
+ high_memory = (void *) (memory_end & PAGE_MASK);
+ max_mapnr = num_physpages = ((unsigned long) high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
+
+ min_low_pfn = memory_start >> PAGE_SHIFT;
+ max_low_pfn = memory_end >> PAGE_SHIFT;
+ max_pfn = max_low_pfn;
+
+ /* now take back the bits the core kernel is occupying */
+#ifndef CONFIG_PROTECT_KERNEL
+ reserve_bootmem(kend, bootmap_size);
+ reserve_bootmem((unsigned long) &__kernel_image_start,
+ kend - (unsigned long) &__kernel_image_start);
+
+#else
+ dampr = __get_DAMPR(0);
+ dampr &= xAMPRx_SS;
+ dampr = (dampr >> 4) + 17;
+ dampr = 1 << dampr;
+
+ reserve_bootmem(__get_DAMPR(0) & xAMPRx_PPFN, dampr);
+#endif
+
+ /* reserve some memory to do uncached DMA through if requested */
+#ifdef CONFIG_RESERVE_DMA_COHERENT
+ if (dma_coherent_mem_start)
+ reserve_bootmem(dma_coherent_mem_start,
+ dma_coherent_mem_end - dma_coherent_mem_start);
+#endif
+
+} /* end setup_uclinux_memory() */
+#endif
+
+/*****************************************************************************/
+/*
+ * get CPU information for use by procfs
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ const char *gr, *fr, *fm, *fp, *cm, *nem, *ble;
+#ifdef CONFIG_PM
+ const char *sep;
+#endif
+
+ gr = cpu_hsr0_all & HSR0_GRHE ? "gr0-63" : "gr0-31";
+ fr = cpu_hsr0_all & HSR0_FRHE ? "fr0-63" : "fr0-31";
+ fm = cpu_psr_all & PSR_EM ? ", Media" : "";
+ fp = cpu_psr_all & PSR_EF ? ", FPU" : "";
+ cm = cpu_psr_all & PSR_CM ? ", CCCR" : "";
+ nem = cpu_psr_all & PSR_NEM ? ", NE" : "";
+ ble = cpu_psr_all & PSR_BE ? "BE" : "LE";
+
+ seq_printf(m,
+ "CPU-Series:\t%s\n"
+ "CPU-Core:\t%s, %s, %s%s%s\n"
+ "CPU:\t\t%s\n"
+ "MMU:\t\t%s\n"
+ "FP-Media:\t%s%s%s\n"
+ "System:\t\t%s",
+ cpu_series,
+ cpu_core, gr, ble, cm, nem,
+ cpu_silicon,
+ cpu_mmu,
+ fr, fm, fp,
+ cpu_system);
+
+ if (cpu_board1)
+ seq_printf(m, ", %s", cpu_board1);
+
+ if (cpu_board2)
+ seq_printf(m, ", %s", cpu_board2);
+
+ seq_printf(m, "\n");
+
+#ifdef CONFIG_PM
+ seq_printf(m, "PM-Controls:");
+ sep = "\t";
+
+ if (clock_bits_settable & CLOCK_BIT_CMODE) {
+ seq_printf(m, "%scmode=0x%04hx", sep, clock_cmodes_permitted);
+ sep = ", ";
+ }
+
+ if (clock_bits_settable & CLOCK_BIT_CM) {
+ seq_printf(m, "%scm=0x%lx", sep, clock_bits_settable & CLOCK_BIT_CM);
+ sep = ", ";
+ }
+
+ if (clock_bits_settable & CLOCK_BIT_P0) {
+ seq_printf(m, "%sp0=0x3", sep);
+ sep = ", ";
+ }
+
+ seq_printf(m, "%ssuspend=0x22\n", sep);
+#endif
+
+ seq_printf(m,
+ "PM-Status:\tcmode=%d, cm=%d, p0=%d\n",
+ clock_cmode_current, clock_cm_current, clock_p0_current);
+
+#define print_clk(TAG, VAR) \
+ seq_printf(m, "Clock-" TAG ":\t%lu.%2.2lu MHz\n", VAR / 1000000, (VAR / 10000) % 100)
+
+ print_clk("In", __clkin_clock_speed_HZ);
+ print_clk("Core", __core_clock_speed_HZ);
+ print_clk("SDRAM", __sdram_clock_speed_HZ);
+ print_clk("CBus", __core_bus_clock_speed_HZ);
+ print_clk("Res", __res_bus_clock_speed_HZ);
+ print_clk("Ext", __ext_bus_clock_speed_HZ);
+ print_clk("DSU", __dsu_clock_speed_HZ);
+
+ seq_printf(m,
+ "BogoMips:\t%lu.%02lu\n",
+ (loops_per_jiffy * HZ) / 500000, ((loops_per_jiffy * HZ) / 5000) % 100);
+
+ return 0;
+} /* end show_cpuinfo() */
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < NR_CPUS ? (void *) 0x12345678 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+void arch_gettod(int *year, int *mon, int *day, int *hour,
+ int *min, int *sec)
+{
+ *year = *mon = *day = *hour = *min = *sec = 0;
+}
+
+/*****************************************************************************/
+/*
+ *
+ */
+#ifdef CONFIG_MB93090_MB00
+static void __init mb93090_sendlcdcmd(uint32_t cmd)
+{
+ unsigned long base = __addr_LCD();
+ int loop;
+
+ /* request reading of the busy flag */
+ __set_LCD(base, LCD_CMD_READ_BUSY);
+ __set_LCD(base, LCD_CMD_READ_BUSY & ~LCD_E);
+
+ /* wait for the busy flag to become clear */
+ for (loop = 10000; loop > 0; loop--)
+ if (!(__get_LCD(base) & 0x80))
+ break;
+
+ /* send the command */
+ __set_LCD(base, cmd);
+ __set_LCD(base, cmd & ~LCD_E);
+
+} /* end mb93090_sendlcdcmd() */
+
+/*****************************************************************************/
+/*
+ * write to the MB93090 LEDs and LCD
+ */
+static void __init mb93090_display(void)
+{
+ const char *p;
+
+ __set_LEDS(0);
+
+ /* set up the LCD */
+ mb93090_sendlcdcmd(LCD_CMD_CLEAR);
+ mb93090_sendlcdcmd(LCD_CMD_FUNCSET(1,1,0));
+ mb93090_sendlcdcmd(LCD_CMD_ON(0,0));
+ mb93090_sendlcdcmd(LCD_CMD_HOME);
+
+ mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(0));
+ for (p = mb93090_banner; *p; p++)
+ mb93090_sendlcdcmd(LCD_DATA_WRITE(*p));
+
+ mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(64));
+ for (p = mb93090_version; *p; p++)
+ mb93090_sendlcdcmd(LCD_DATA_WRITE(*p));
+
+} /* end mb93090_display() */
+
+#endif // CONFIG_MB93090_MB00