aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/bcm43xx/bcm43xx.h
AgeCommit message (Collapse)Author
2008-03-13the scheduled bcm43xx removalAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: <Larry.Finger@lwfinger.net> Cc: <stefano.brivio@polimi.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28bcm43xx annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[PATCH] bcm43xx: Remove dead configuration variable CONFIG_947XXLarry Finger
The CONFIG_BCM947XX configuration variable was designed for use by the embedded device used by the OpenWRT project. The device has been shifted to the ssb driver in bcm43xx-mac80211 and will not be used with SoftMAC. Accordingly, this "dead" configuration variable is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] bcm43xx:Eliminate some 'G Mode Enable' magic numbersLarry Finger
In code manipulating the TM State Low register of 802.11 cores, two different magic numbers are used to reference the 'G Mode Enable' bit. One of these, 0x20000000, is clear, but the other, (0x800 << 18), is not. This patch replaces both types with a defined constant. In addition, two bits in the TM State High registers are given definitions to help in following the code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-17Merge branch 'upstream' into upstream-jgarzikJohn W. Linville
Conflicts: net/ieee80211/softmac/ieee80211softmac_module.c net/ieee80211/softmac/ieee80211softmac_wx.c
2007-02-14[PATCH] bcm43xx: Fix for 4311 and 02/07/07 specification changesLarry Finger
The specifications for the bcm43xx driver have been modified. This patch incorporates these changes in the code, which results in the BCM4311 and BCM4312 working. The name of one of the PHY parameters, previously known as "version", has been changed to "analog", short for "analog core version" . Signed-off-by: Larry Finger<Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-14[PATCH] bcm43xx: Fix for oops on resumeLarry Finger
There is a kernel oops on bcm43xx when resuming due to an overly tight timeout loop. Signed-off-by: Larry Finger<Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-14[PATCH] bcm43xx: Janitorial change - remove two unused variablesLarry Finger
Two bit-field values are extracted from the sprom data and never used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-09Merge branch 'upstream' of ↵Jeff Garzik
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2007-02-07[PATCH] bcm43xx: Fix problem with >1 GB RAMLarry Finger
Some versions of the bcm43xx chips only support 30-bit DMA, which means that the descriptors and buffers must be in the first 1 GB of RAM. On the i386 and x86_64 architectures with more than 1 GB RAM, an incorrect assignment may occur. This patch ensures that the various DMA addresses are within the capability of the chip. Testing has been limited to x86_64 as no one has an i386 system with more than 1 GB RAM. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-02-05[PATCH] bcm43xx: Interrogate hardware-enable switch and update LEDsLarry Finger
The current bcm43xx driver ignores any wireless-enable switches on mini-PCI and mini-PCI-E cards. This patch implements a new routine to interrogate the radio hardware enabled bit in the interface, logs the initial state and any changes in the switch (if debugging enabled), activates the LED to show the state, and changes the periodic work handler to provide 1 second response to switch changes and to account for changes in the periodic work specs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-02[PATCH] bcm43xx: add PCI-E codeStefano Brivio
The current bcm43xx driver does not contain code to handle PCI-E interfaces such as the BCM4311 and BCM4312. This patch, originally written by Stefano Brivio adds the necessary code to enable these interfaces. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: output proper link quality with scansLarry Finger
The bcm43xx-softmac driver fails to set two quantities needed for iwlist to compute wireless quality when scanning. As a result, userland programs using the quality to determine the best connection fail. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-09-25[PATCH] bcm43xx-softmac: update noise handlingLarry Finger
In bcm43xx-softmac, the bcm43xx_stats struct contains a variable that is no longer used. In addition, two TODO entries related to noise processing in bcm43xx_rx have been completed, and as unused one is removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: ucode debug status via sysfsLarry Finger
This patch prints out the ucode debug status to sysfs. So, users can watch the microcode status of their hardware. Signed-off-by: Martin Langer <martin-langer@gmx.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: Add firmware version printoutLarry Finger
This patch prints microcode revision, patchlevel, date and time to KERN_INFO. Also, version 4.xx microcodes (rev>0x128) will be rejected by the driver, because they still do not work. Signed-off-by: Martin Langer <martin-langer@gmx.de> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx: >1G and 64bit DMA supportMichael Buesch
This is a rewrite of the bcm43xx DMA engine. It adds support for >1G of memory (for chips that support the extension bits) and 64-bit DMA (for chips that support it). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27[PATCH] bcm43xx: init routine rewriteMichael Buesch
Rewrite of the bcm43xx initialization routines. This fixes several issues: * up-down-up-down-up... stale data issue (May fix some DHCP issues) * Fix the init vs IRQ handler race (and remove the workaround) * Fix init for cards with multiple cores (APHY) As softmac has no internal PHY handling (unlike dscape), this adds the file "phymode" to sysfs. The active PHY can be selected by writing either a, b or g to this file. Current PHY can be determined by reading from it. * Fix the controller restart code. Controller restart can now also be triggered through echo 1 > /debug/bcm43xx/ethX/restart Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27[PATCH] bcm43xx: suspend MAC while executing long pworkMichael Buesch
Suspend MAC (and make MAC-suspend refcounting) when doing long periodic work. On long periodic work, we disable IRQs on the device, so we don't want the MAC to stay operating and probably miss packets due do non-delivery of interrupts. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-10[PATCH] bcm43xx: opencoded lockingMichael Buesch
As many people don't seem to like the locking "obfuscation" in the bcm43xx driver, this patch removes it. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-26[PATCH] Add bcm43xx HW RNG supportMichael Buesch
Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-15[PATCH] bcm43xx: redesign lockingMichael Buesch
Redesign the bcm43xx locking. This is pre-work to get a preemptible periodic work handler. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24[PATCH] bcm43xx: use pci_iomap() for convenience.Michael Buesch
This reduces codesize. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-19[PATCH] bcm43xx: sysfs code cleanupMichael Buesch
This cleans up the bcm43xx sysfs code and makes it compliant with the unwritten sysfs rules (at least I hope so). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: sync GPHY init with the specs.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: add useless and broken statistics stuff. People seem to ↵Michael Buesch
want it. well... Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: sync interference mitigation code to the specs.Michael Buesch
This also includes a rewritten valuesave-stack. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: set default attenuation values.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Do boardflags workarounds for specific boards.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: reduce the size of bcm43xx_private by removing unneeded ↵Michael Buesch
members. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Remove the mmio access printing facility overhead.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Abstract the locking mechanism.Michael Buesch
This is the starting point to make the driver out-of-order-MMIO-stores safe. There are more mmiowb() needed. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Add sysfs attributes for device specific tunables.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Move TX/RX related functions to its own file. Add basic ↵Michael Buesch
RTS/CTS code. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Code cleanups. This removes various "inline" statements and ↵Michael Buesch
reduces codesize. Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: rewrite and simplify the periodic task handling.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Partially fix PIO code. Add Kconfig option for PIO or DMA ↵Michael Buesch
mode (or both). Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: fix txpower reporting in WE.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: Fix makefile. Remove all the "out-of-tree" stuff.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] bcm43xx: remove linux version compatibility code.Michael Buesch
Signed-off-by: Michael Buesch <mbuesch@freenet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27[PATCH] wireless: import bcm43xx sourcesJohn W. Linville
Import the bcm43xx driver from the upstream sources here: ftp://ftp.berlios.de/pub/bcm43xx/snapshots/bcm43xx/bcm43xx-20060123.tar.bz2 Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 12:51:43 +0000