aboutsummaryrefslogtreecommitdiff
path: root/cpu/blackfin
AgeCommit message (Expand)Author
2009-05-19Blackfin: fix timer_init()/timer_reset()Graf Yang
2009-05-06Blackfin: avoid get_sclk() with early serial debugMike Frysinger
2009-05-06Blackfin: fix booting with older bootroms (no EVT1)Mike Frysinger
2009-05-06Blackfin: recurse with early serial initcodeMike Frysinger
2009-04-06Blackfin: audit UART for all known anomaliesMike Frysinger
2009-04-06Blackfin: add check for anomaly 05000362Mike Frysinger
2009-04-06Blackfin: add comment about anomaly 05000430 avoidanceMike Frysinger
2009-04-06Blackfin: add workaround for anomaly 05000242Mike Frysinger
2009-04-06Blackfin: add workaround for anomaly 05000171Mike Frysinger
2009-04-02Blackfin: do not delay on output bytesMike Frysinger
2009-04-02Blackfin: fix crash when booting from external memoryMike Frysinger
2009-03-23Blackfin: put memory into self-refresh before/after programming clocksMike Frysinger
2009-03-23Blackfin: do not program voltage regulator on parts that do not have oneMike Frysinger
2009-03-23Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllersMike Frysinger
2009-03-23Blackfin: handle reboot anomaly 432Mike Frysinger
2009-03-23Blackfin: kill off LDR jump blockMike Frysinger
2009-03-23Blackfin: simplify symbol_lookup() a bitMike Frysinger
2009-03-23Blackfin: mark bfin_reset staticMike Frysinger
2009-03-23Blackfin: fix jtag console tstcMike Frysinger
2009-02-21Blackfin: disable syscontrol code for nowMike Frysinger
2009-02-05Blackfin: dynamically update UART speed when initializingMike Frysinger
2009-02-05Blackfin: add support for fast SPI reads with Boot ROMMike Frysinger
2009-02-05Blackfin: check for reserved settings in DDR MMRsMike Frysinger
2009-02-05Blackfin: set default voltage levels for BF538/BF539 partsMike Frysinger
2009-02-05Blackfin: use on-chip syscontrol() rom function when availableMike Frysinger
2009-02-02Blackfin: rewrite cache handling functionsMike Frysinger
2009-02-02Blackfin: enable --gc-sectionsMike Frysinger
2009-02-02Blackfin: dont check baud if it wont actually get usedMike Frysinger
2009-01-28Blackfin: fixup misc warnings such as printf's and missing castsMike Frysinger
2009-01-28Blackfin: allow serial console to be disabledMike Frysinger
2009-01-28Blackfin: support console-over-JTAGMike Frysinger
2009-01-28Blackfin: handle new anomalies with resetMike Frysinger
2009-01-28Blackfin: pass RETX to LinuxMike Frysinger
2009-01-28Blackfin: clarify relocation comment during initMike Frysinger
2009-01-28Blackfin: just set SP register directly during initMike Frysinger
2009-01-28Blackfin: add portmuxing for UARTs on the BF51xMike Frysinger
2009-01-28Blackfin: respect CONFIG_CLKIN_HALFMike Frysinger
2009-01-28Blackfin: use common memcpy routine during initMike Frysinger
2009-01-28Blackfin: overhaul i2c driverMike Frysinger
2009-01-28Blackfin: fix dcache handling when doing dma memcpy'sMike Frysinger
2009-01-28Blackfin: minimize time cache is turned off when replacing cplb entriesMike Frysinger
2008-12-15i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functionsTimur Tabi
2008-10-23Blackfin: fix up UART status bit handlingMike Frysinger
2008-10-23Blackfin: small cpu init optimization while setting interrupt maskMike Frysinger
2008-10-23Blackfin: set initial stack correctly according to Blackfin ABIMike Frysinger
2008-10-23Blackfin: make baud calculation more accurateMike Frysinger
2008-10-23Blackfin: decode hwerrcause/excause when crashingMike Frysinger
2008-10-23Blackfin: fix register dump messagesMike Frysinger
2008-10-23Blackfin: don't bother displaying reboot msg when crashingMike Frysinger
2008-10-23Blackfin: enable support for nested interruptsMike Frysinger
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-01 03:22:32 +0000