Remove CPCI440 board

This board never left prototyping state and it
became a millstone round my neck. So remove it.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

1 files changed, 0 insertions, 152 deletions

diff --git a/board/esd/cpci440/cpci440.c b/board/esd/cpci440/cpci440.c
deleted file mode 100644
index caa6d5591..000000000
--- a/board/esd/cpci440/cpci440.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * (C) Copyright 2002
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-
-
-extern void lxt971_no_sleep(void);
-
-
-long int fixed_sdram( void );
-
-int board_early_init_f (void)
-{
-	uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr( ebccfga, xbcfg );
-	reg = mfdcr( ebccfgd );
-	mtdcr( ebccfgd, reg | 0x04000000 );	/* Set ATC */
-
-	mtebc( pb0ap, 0x92015480 );	/* FLASH/SRAM */
-	mtebc( pb0cr, 0xFF87A000 ); /* BAS=0xff8 8MB R/W 16-bit */
-	/* test-only: other regs still missing... */
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr( uic0sr, 0xffffffff );    /* clear all */
-	mtdcr( uic0er, 0x00000000 );    /* disable all */
-	mtdcr( uic0cr, 0x00000009 );    /* SMI & UIC1 crit are critical */
-	mtdcr( uic0pr, 0xfffffe13 );    /* per ref-board manual */
-	mtdcr( uic0tr, 0x01c00008 );    /* per ref-board manual */
-	mtdcr( uic0vr, 0x00000001 );    /* int31 highest, base=0x000 */
-	mtdcr( uic0sr, 0xffffffff );    /* clear all */
-
-	mtdcr( uic1sr, 0xffffffff );    /* clear all */
-	mtdcr( uic1er, 0x00000000 );    /* disable all */
-	mtdcr( uic1cr, 0x00000000 );    /* all non-critical */
-	mtdcr( uic1pr, 0xffffe0ff );    /* per ref-board manual */
-	mtdcr( uic1tr, 0x00ffc000 );    /* per ref-board manual */
-	mtdcr( uic1vr, 0x00000001 );    /* int31 highest, base=0x000 */
-	mtdcr( uic1sr, 0xffffffff );    /* clear all */
-
-	return 0;
-}
-
-
-int checkboard (void)
-{
-	sys_info_t sysinfo;
-	get_sys_info(&sysinfo);
-
-	printf("Board: esd CPCI-440\n");
-	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz/1000000);
-	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor/1000000);
-	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB/1000000);
-	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB/1000000);
-	printf("\tEBC: %lu MHz\n", sysinfo.freqEBC/1000000);
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
-	return (0);
-}
-
-
-long int initdram (int board_type)
-{
-	long    dram_size = 0;
-
-	dram_size = fixed_sdram();
-	return dram_size;
-}
-
-
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- *
- *  Assumes:    64 MB, non-ECC, non-registered
- *              PLB @ 133 MHz
- *
- ************************************************************************/
-long int fixed_sdram( void )
-{
-	uint    reg;
-
-#if 1 /* test-only */
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram( mem_uabba, 0x00000000 );   /* ubba=0 (default)             */
-	mtsdram( mem_slio,  0x00000000 );   /* rdre=0 wrre=0 rarw=0         */
-	mtsdram( mem_devopt,0x00000000 );   /* dll=0 ds=0 (normal)          */
-	mtsdram( mem_wddctr,0x40000000 );   /* wrcp=0 dcd=0                 */
-	mtsdram( mem_clktr, 0x40000000 );   /* clkp=1 (90 deg wr) dcdt=0    */
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram( mem_b0cr, 0x00082001 );/* SDBA=0x000, 64MB, Mode 2, enabled*/
-	mtsdram( mem_tr0,  0x410a4012 );/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
-	/* RA=10 RD=3                       */
-	mtsdram( mem_tr1,  0x8080082f );/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
-	mtsdram( mem_rtr,  0x08200000 );/* Rate 15.625 ns @ 133 MHz PLB     */
-	mtsdram( mem_cfg1, 0x00000000 );/* Self-refresh exit, disable PM    */
-	udelay( 400 );                  /* Delay 200 usecs (min)            */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram( mem_cfg0, 0x86000000 );/* DCEN=1, PMUD=1, 64-bit           */
-	for(;;)
-	{
-		mfsdram( mem_mcsts, reg );
-		if( reg & 0x80000000 )
-			break;
-	}
-
-	return( 64 * 1024 * 1024 );      /* 64 MB                           */
-#else
-	return( 32 * 1024 * 1024 );      /* 64 MB                           */
-#endif
-}