aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSukumar Ghorai <s-ghorai@ti.com>2010-09-18 20:59:54 -0700
committerWolfgang Denk <wd@denx.de>2010-10-17 20:14:15 +0200
commit084c4c1bc10ef7abd64eebaf4c0a559409c82ddb (patch)
treed93bac27f0a0afa8e661997c0f715c6f09c9ad47
parent7e982c956d74614fc59cacf39016fad8bbb194ed (diff)
ARMV7: OMAP4: Use generic mmc driver on SDP4430
This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
-rw-r--r--board/ti/sdp4430/sdp.c10
-rw-r--r--include/configs/omap4_sdp4430.h10
2 files changed, 15 insertions, 5 deletions
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 7039bd559..01d5ce4f4 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -24,6 +24,7 @@
*/
#include <common.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
#include "sdp.h"
@@ -88,3 +89,12 @@ void set_muxconf_regs(void)
sizeof(wkup_padconf_array) /
sizeof(struct pad_conf_entry));
}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ omap_mmc_init(1);
+ return 0;
+}
+#endif
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 98a86c3f5..1241b1e3d 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -90,7 +90,7 @@
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_OVERWRITE
+
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
@@ -108,8 +108,9 @@
#define CONFIG_TWL6030_POWER 1
/* MMC */
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_SYS_MMC_SET_DEV 1
#define CONFIG_DOS_PARTITION 1
@@ -151,7 +152,6 @@
#define CONFIG_BOOTDELAY 3
-/* allow overwriting serial config and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -159,7 +159,7 @@
"console=ttyS2,115200n8\0" \
"usbtty=cdc_acm\0" \
"vram=16M\0" \
- "mmcdev=1\0" \
+ "mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
"mmcrootfstype=ext3 rootwait\0" \
"mmcargs=setenv bootargs console=${console} " \
@@ -175,7 +175,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc init ${mmcdev}; then " \
+ "if mmc rescan ${mmcdev}; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \