diff options
Diffstat (limited to 'arch/arm/cpu/armv7/sunxi/clock_sun4i.c')
| -rw-r--r-- | arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c new file mode 100644 index 000000000..5a7da3c6b --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -0,0 +1,188 @@ +/* + * sun4i, sun5i and sun7i specific clock code + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> + +#ifdef CONFIG_SPL_BUILD +void clock_init_safe(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Set safe defaults until PMU is configured */ + writel(AXI_DIV_1 << AXI_DIV_SHIFT | + AHB_DIV_2 << AHB_DIV_SHIFT | + APB0_DIV_1 << APB0_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg); + sdelay(200); + writel(AXI_DIV_1 << AXI_DIV_SHIFT | + AHB_DIV_2 << AHB_DIV_SHIFT | + APB0_DIV_1 << APB0_DIV_SHIFT | + CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); +#ifdef CONFIG_SUN7I + writel(0x1 << AHB_GATE_OFFSET_DMA | readl(&ccm->ahb_gate0), + &ccm->ahb_gate0); +#endif + writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); +} +#endif + +void clock_init_uart(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* uart clock source is apb1 */ + writel(APB1_CLK_SRC_OSC24M| + APB1_CLK_RATE_N_1| + APB1_CLK_RATE_M(1), + &ccm->apb1_clk_div_cfg); + + /* open the clock for uart */ + setbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1)); +} + +int clock_twi_onoff(int port, int state) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (port > 2) + return -1; + + /* set the apb clock gate for twi */ + if (state) + setbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); + else + clrbits_le32(&ccm->apb1_gate, + CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port)); + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +#define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \ + 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \ + 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \ + 0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \ + 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \ + (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \ + 2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \ + (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \ + (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \ + 0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \ + 0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \ + (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT) + +static struct { + u32 pll1_cfg; + unsigned int freq; +} pll1_para[] = { + /* This array must be ordered by frequency. */ + { PLL1_CFG(16, 0, 0, 0), 384000000 }, + { PLL1_CFG(16, 1, 0, 0), 768000000 }, + { PLL1_CFG(20, 1, 0, 0), 960000000 }, + { PLL1_CFG(21, 1, 0, 0), 1008000000}, + { PLL1_CFG(22, 1, 0, 0), 1056000000}, + { PLL1_CFG(23, 1, 0, 0), 1104000000}, + { PLL1_CFG(24, 1, 0, 0), 1152000000}, + { PLL1_CFG(25, 1, 0, 0), 1200000000}, + { PLL1_CFG(26, 1, 0, 0), 1248000000}, + { PLL1_CFG(27, 1, 0, 0), 1296000000}, + { PLL1_CFG(28, 1, 0, 0), 1344000000}, + { PLL1_CFG(29, 1, 0, 0), 1392000000}, + { PLL1_CFG(30, 1, 0, 0), 1440000000}, + { PLL1_CFG(31, 1, 0, 0), 1488000000}, + /* Final catchall entry */ + { PLL1_CFG(31, 1, 0, 0), ~0}, +}; + +void clock_set_pll1(unsigned int hz) +{ + int i = 0; + int axi, ahb, apb0; + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* Find target frequency */ + while (pll1_para[i].freq < hz) + i++; + + hz = pll1_para[i].freq; + + /* Calculate system clock divisors */ + axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */ + ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */ + apb0 = 2; /* Max 150MHz */ + + printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0); + + /* Map divisors to register values */ + axi = axi - 1; + if (ahb > 4) + ahb = 3; + else if (ahb > 2) + ahb = 2; + else if (ahb > 1) + ahb = 1; + else + ahb = 0; + + apb0 = apb0 - 1; + + /* Switch to 24MHz clock while changing PLL1 */ + writel(AXI_DIV_1 << AXI_DIV_SHIFT | + AHB_DIV_2 << AHB_DIV_SHIFT | + APB0_DIV_1 << APB0_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + sdelay(20); + + /* Configure sys clock divisors */ + writel(axi << AXI_DIV_SHIFT | + ahb << AHB_DIV_SHIFT | + apb0 << APB0_DIV_SHIFT | + CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + + /* Configure PLL1 at the desired frequency */ + writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg); + sdelay(200); + + /* Switch CPU to PLL1 */ + writel(axi << AXI_DIV_SHIFT | + ahb << AHB_DIV_SHIFT | + apb0 << APB0_DIV_SHIFT | + CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, + &ccm->cpu_ahb_apb0_cfg); + sdelay(20); +} +#endif + +unsigned int clock_get_pll6(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll6_cfg); + int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT); + int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; + return 24000000 * n * k / 2; +} |