diff options
Diffstat (limited to 'drivers/mmc/host/mmci.c')
| -rw-r--r-- | drivers/mmc/host/mmci.c | 55 |
1 files changed, 46 insertions, 9 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 295826bee3a..ff3ae15adaa 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -45,6 +45,7 @@ static unsigned int fmax = 515633; * struct variant_data - MMCI variant-specific quirks * @clkreg: default value for MCICLOCK register * @clkreg_enable: enable value for MMCICLOCK register + * @dma_sdio_req_ctrl: enable value for DMAREQCTL register for SDIO write * @datalength_bits: number of bits in the MMCIDATALENGTH register * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY * is asserted (likewise for RX) @@ -60,6 +61,7 @@ static unsigned int fmax = 515633; struct variant_data { unsigned int clkreg; unsigned int clkreg_enable; + unsigned int dma_sdio_req_ctrl; unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; @@ -100,6 +102,7 @@ static struct variant_data variant_ux500 = { .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, .clkreg_enable = MCI_ST_UX500_HWFCEN, + .dma_sdio_req_ctrl = MCI_ST_DPSM_DMAREQCTL, .datalength_bits = 24, .sdio = true, .st_clkdiv = true, @@ -112,6 +115,7 @@ static struct variant_data variant_ux500v2 = { .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, .clkreg_enable = MCI_ST_UX500_HWFCEN, + .dma_sdio_req_ctrl = MCI_ST_DPSM_DMAREQCTL, .datalength_bits = 24, .sdio = true, .st_clkdiv = true, @@ -122,6 +126,31 @@ static struct variant_data variant_ux500v2 = { }; /* + * Validate mmc prerequisites + */ +static int mmci_validate_data(struct mmci_host *host, + struct mmc_data *data) +{ + if (!data) + return 0; + + if (!host->variant->non_power_of_2_blksize && + !is_power_of_2(data->blksz)) { + dev_err(mmc_dev(host->mmc), + "unsupported block size (%d bytes)\n", data->blksz); + return -EINVAL; + } + + if (data->sg->offset & 3) { + dev_err(mmc_dev(host->mmc), + "unsupported alginment (0x%x)\n", data->sg->offset); + return -EINVAL; + } + + return 0; +} + +/* * This must be called with host->lock held */ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) @@ -416,8 +445,12 @@ static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data, if (!chan) return -EINVAL; - /* If less than or equal to the fifo size, don't bother with DMA */ - if (data->blksz * data->blocks <= variant->fifosize) + /* + * If less than or equal to the fifo size, don't bother with DMA + * SDIO transfers may not be 4 bytes aligned, fall back to PIO + */ + if (data->blksz * data->blocks <= variant->fifosize || + (data->blksz * data->blocks) & 3) return -EINVAL; device = chan->device; @@ -452,6 +485,7 @@ static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) { int ret; struct mmc_data *data = host->data; + struct variant_data *variant = host->variant; ret = mmci_dma_prep_data(host, host->data, NULL); if (ret) @@ -466,6 +500,11 @@ static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) datactrl |= MCI_DPSM_DMAENABLE; + /* Some hardware versions need special flags for SDIO DMA write */ + if (variant->sdio && host->mmc->card && mmc_card_sdio(host->mmc->card) + && (data->flags & MMC_DATA_WRITE)) + datactrl |= variant->dma_sdio_req_ctrl; + /* Trigger the DMA transfer */ writel(datactrl, host->base + MMCIDATACTRL); @@ -510,6 +549,9 @@ static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq, if (!data) return; + if (mmci_validate_data(host, mrq->data)) + return; + if (data->host_cookie) { data->host_cookie = 0; return; @@ -1003,17 +1045,12 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct mmci_host *host = mmc_priv(mmc); - struct variant_data *variant = host->variant; unsigned long flags; WARN_ON(host->mrq != NULL); - if (mrq->data && - !variant->non_power_of_2_blksize && - !is_power_of_2(mrq->data->blksz)) { - dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n", - mrq->data->blksz); - mrq->cmd->error = -EINVAL; + mrq->cmd->error = mmci_validate_data(host, mrq->data); + if (mrq->cmd->error) { mmc_request_done(mmc, mrq); return; } |