1 files changed, 183 insertions, 0 deletions
diff --git a/platform/linux-generic/miniz/miniz_tdef.h b/platform/linux-generic/miniz/miniz_tdef.h
new file mode 100644
index 000000000..25448b6fa
--- /dev/null
+++ b/platform/linux-generic/miniz/miniz_tdef.h
@@ -0,0 +1,183 @@
+#pragma once
+#include "miniz.h"
+#include "miniz_common.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/* ------------------- Low-level Compression API Definitions */
+
+/* Set TDEFL_LESS_MEMORY to 1 to use less memory (compression will be slightly slower, and raw/dynamic blocks will be output more frequently). */
+#define TDEFL_LESS_MEMORY 0
+
+/* tdefl_init() compression flags logically OR'd together (low 12 bits contain the max. number of probes per dictionary search): */
+/* TDEFL_DEFAULT_MAX_PROBES: The compressor defaults to 128 dictionary probes per dictionary search. 0=Huffman only, 1=Huffman+LZ (fastest/crap compression), 4095=Huffman+LZ (slowest/best compression). */
+enum
+{
+    TDEFL_HUFFMAN_ONLY = 0,
+    TDEFL_DEFAULT_MAX_PROBES = 128,
+    TDEFL_MAX_PROBES_MASK = 0xFFF
+};
+
+/* TDEFL_WRITE_ZLIB_HEADER: If set, the compressor outputs a zlib header before the deflate data, and the Adler-32 of the source data at the end. Otherwise, you'll get raw deflate data. */
+/* TDEFL_COMPUTE_ADLER32: Always compute the adler-32 of the input data (even when not writing zlib headers). */
+/* TDEFL_GREEDY_PARSING_FLAG: Set to use faster greedy parsing, instead of more efficient lazy parsing. */
+/* TDEFL_NONDETERMINISTIC_PARSING_FLAG: Enable to decrease the compressor's initialization time to the minimum, but the output may vary from run to run given the same input (depending on the contents of memory). */
+/* TDEFL_RLE_MATCHES: Only look for RLE matches (matches with a distance of 1) */
+/* TDEFL_FILTER_MATCHES: Discards matches <= 5 chars if enabled. */
+/* TDEFL_FORCE_ALL_STATIC_BLOCKS: Disable usage of optimized Huffman tables. */
+/* TDEFL_FORCE_ALL_RAW_BLOCKS: Only use raw (uncompressed) deflate blocks. */
+/* The low 12 bits are reserved to control the max # of hash probes per dictionary lookup (see TDEFL_MAX_PROBES_MASK). */
+enum
+{
+    TDEFL_WRITE_ZLIB_HEADER = 0x01000,
+    TDEFL_COMPUTE_ADLER32 = 0x02000,
+    TDEFL_GREEDY_PARSING_FLAG = 0x04000,
+    TDEFL_NONDETERMINISTIC_PARSING_FLAG = 0x08000,
+    TDEFL_RLE_MATCHES = 0x10000,
+    TDEFL_FILTER_MATCHES = 0x20000,
+    TDEFL_FORCE_ALL_STATIC_BLOCKS = 0x40000,
+    TDEFL_FORCE_ALL_RAW_BLOCKS = 0x80000
+};
+
+/* High level compression functions: */
+/* tdefl_compress_mem_to_heap() compresses a block in memory to a heap block allocated via malloc(). */
+/* On entry: */
+/*  pSrc_buf, src_buf_len: Pointer and size of source block to compress. */
+/*  flags: The max match finder probes (default is 128) logically OR'd against the above flags. Higher probes are slower but improve compression. */
+/* On return: */
+/*  Function returns a pointer to the compressed data, or NULL on failure. */
+/*  *pOut_len will be set to the compressed data's size, which could be larger than src_buf_len on uncompressible data. */
+/*  The caller must free() the returned block when it's no longer needed. */
+void *tdefl_compress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags);
+
+/* tdefl_compress_mem_to_mem() compresses a block in memory to another block in memory. */
+/* Returns 0 on failure. */
+size_t tdefl_compress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags);
+
+/* Compresses an image to a compressed PNG file in memory. */
+/* On entry: */
+/*  pImage, w, h, and num_chans describe the image to compress. num_chans may be 1, 2, 3, or 4. */
+/*  The image pitch in bytes per scanline will be w*num_chans. The leftmost pixel on the top scanline is stored first in memory. */
+/*  level may range from [0,10], use MZ_NO_COMPRESSION, MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc. or a decent default is MZ_DEFAULT_LEVEL */
+/*  If flip is true, the image will be flipped on the Y axis (useful for OpenGL apps). */
+/* On return: */
+/*  Function returns a pointer to the compressed data, or NULL on failure. */
+/*  *pLen_out will be set to the size of the PNG image file. */
+/*  The caller must mz_free() the returned heap block (which will typically be larger than *pLen_out) when it's no longer needed. */
+void *tdefl_write_image_to_png_file_in_memory_ex(const void *pImage, int w, int h, int num_chans, size_t *pLen_out, mz_uint level, mz_bool flip);
+void *tdefl_write_image_to_png_file_in_memory(const void *pImage, int w, int h, int num_chans, size_t *pLen_out);
+
+/* Output stream interface. The compressor uses this interface to write compressed data. It'll typically be called TDEFL_OUT_BUF_SIZE at a time. */
+typedef mz_bool (*tdefl_put_buf_func_ptr)(const void *pBuf, int len, void *pUser);
+
+/* tdefl_compress_mem_to_output() compresses a block to an output stream. The above helpers use this function internally. */
+mz_bool tdefl_compress_mem_to_output(const void *pBuf, size_t buf_len, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags);
+
+enum
+{
+    TDEFL_MAX_HUFF_TABLES = 3,
+    TDEFL_MAX_HUFF_SYMBOLS_0 = 288,
+    TDEFL_MAX_HUFF_SYMBOLS_1 = 32,
+    TDEFL_MAX_HUFF_SYMBOLS_2 = 19,
+    TDEFL_LZ_DICT_SIZE = 32768,
+    TDEFL_LZ_DICT_SIZE_MASK = TDEFL_LZ_DICT_SIZE - 1,
+    TDEFL_MIN_MATCH_LEN = 3,
+    TDEFL_MAX_MATCH_LEN = 258
+};
+
+/* TDEFL_OUT_BUF_SIZE MUST be large enough to hold a single entire compressed output block (using static/fixed Huffman codes). */
+#if TDEFL_LESS_MEMORY
+enum
+{
+    TDEFL_LZ_CODE_BUF_SIZE = 24 * 1024,
+    TDEFL_OUT_BUF_SIZE = (TDEFL_LZ_CODE_BUF_SIZE * 13) / 10,
+    TDEFL_MAX_HUFF_SYMBOLS = 288,
+    TDEFL_LZ_HASH_BITS = 12,
+    TDEFL_LEVEL1_HASH_SIZE_MASK = 4095,
+    TDEFL_LZ_HASH_SHIFT = (TDEFL_LZ_HASH_BITS + 2) / 3,
+    TDEFL_LZ_HASH_SIZE = 1 << TDEFL_LZ_HASH_BITS
+};
+#else
+enum
+{
+    TDEFL_LZ_CODE_BUF_SIZE = 64 * 1024,
+    TDEFL_OUT_BUF_SIZE = (TDEFL_LZ_CODE_BUF_SIZE * 13) / 10,
+    TDEFL_MAX_HUFF_SYMBOLS = 288,
+    TDEFL_LZ_HASH_BITS = 15,
+    TDEFL_LEVEL1_HASH_SIZE_MASK = 4095,
+    TDEFL_LZ_HASH_SHIFT = (TDEFL_LZ_HASH_BITS + 2) / 3,
+    TDEFL_LZ_HASH_SIZE = 1 << TDEFL_LZ_HASH_BITS
+};
+#endif
+
+/* The low-level tdefl functions below may be used directly if the above helper functions aren't flexible enough. The low-level functions don't make any heap allocations, unlike the above helper functions. */
+typedef enum {
+    TDEFL_STATUS_BAD_PARAM = -2,
+    TDEFL_STATUS_PUT_BUF_FAILED = -1,
+    TDEFL_STATUS_OKAY = 0,
+    TDEFL_STATUS_DONE = 1
+} tdefl_status;
+
+/* Must map to MZ_NO_FLUSH, MZ_SYNC_FLUSH, etc. enums */
+typedef enum {
+    TDEFL_NO_FLUSH = 0,
+    TDEFL_SYNC_FLUSH = 2,
+    TDEFL_FULL_FLUSH = 3,
+    TDEFL_FINISH = 4
+} tdefl_flush;
+
+/* tdefl's compression state structure. */
+typedef struct
+{
+    tdefl_put_buf_func_ptr m_pPut_buf_func;
+    void *m_pPut_buf_user;
+    mz_uint m_flags, m_max_probes[2];
+    int m_greedy_parsing;
+    mz_uint m_adler32, m_lookahead_pos, m_lookahead_size, m_dict_size;
+    mz_uint8 *m_pLZ_code_buf, *m_pLZ_flags, *m_pOutput_buf, *m_pOutput_buf_end;
+    mz_uint m_num_flags_left, m_total_lz_bytes, m_lz_code_buf_dict_pos, m_bits_in, m_bit_buffer;
+    mz_uint m_saved_match_dist, m_saved_match_len, m_saved_lit, m_output_flush_ofs, m_output_flush_remaining, m_finished, m_block_index, m_wants_to_finish;
+    tdefl_status m_prev_return_status;
+    const void *m_pIn_buf;
+    void *m_pOut_buf;
+    size_t *m_pIn_buf_size, *m_pOut_buf_size;
+    tdefl_flush m_flush;
+    const mz_uint8 *m_pSrc;
+    size_t m_src_buf_left, m_out_buf_ofs;
+    mz_uint8 m_dict[TDEFL_LZ_DICT_SIZE + TDEFL_MAX_MATCH_LEN - 1];
+    mz_uint16 m_huff_count[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS];
+    mz_uint16 m_huff_codes[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS];
+    mz_uint8 m_huff_code_sizes[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS];
+    mz_uint8 m_lz_code_buf[TDEFL_LZ_CODE_BUF_SIZE];
+    mz_uint16 m_next[TDEFL_LZ_DICT_SIZE];
+    mz_uint16 m_hash[TDEFL_LZ_HASH_SIZE];
+    mz_uint8 m_output_buf[TDEFL_OUT_BUF_SIZE];
+} tdefl_compressor;
+
+/* Initializes the compressor. */
+/* There is no corresponding deinit() function because the tdefl API's do not dynamically allocate memory. */
+/* pBut_buf_func: If NULL, output data will be supplied to the specified callback. In this case, the user should call the tdefl_compress_buffer() API for compression. */
+/* If pBut_buf_func is NULL the user should always call the tdefl_compress() API. */
+/* flags: See the above enums (TDEFL_HUFFMAN_ONLY, TDEFL_WRITE_ZLIB_HEADER, etc.) */
+tdefl_status tdefl_init(tdefl_compressor *d, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags);
+
+/* Compresses a block of data, consuming as much of the specified input buffer as possible, and writing as much compressed data to the specified output buffer as possible. */
+tdefl_status tdefl_compress(tdefl_compressor *d, const void *pIn_buf, size_t *pIn_buf_size, void *pOut_buf, size_t *pOut_buf_size, tdefl_flush flush);
+
+/* tdefl_compress_buffer() is only usable when the tdefl_init() is called with a non-NULL tdefl_put_buf_func_ptr. */
+/* tdefl_compress_buffer() always consumes the entire input buffer. */
+tdefl_status tdefl_compress_buffer(tdefl_compressor *d, const void *pIn_buf, size_t in_buf_size, tdefl_flush flush);
+
+tdefl_status tdefl_get_prev_return_status(tdefl_compressor *d);
+mz_uint32 tdefl_get_adler32(tdefl_compressor *d);
+
+/* Create tdefl_compress() flags given zlib-style compression parameters. */
+/* level may range from [0,10] (where 10 is absolute max compression, but may be much slower on some files) */
+/* window_bits may be -15 (raw deflate) or 15 (zlib) */
+/* strategy may be either MZ_DEFAULT_STRATEGY, MZ_FILTERED, MZ_HUFFMAN_ONLY, MZ_RLE, or MZ_FIXED */
+mz_uint tdefl_create_comp_flags_from_zip_params(int level, int window_bits, int strategy);
+
+#ifdef __cplusplus
+}
+#endif