diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 112 |
1 files changed, 112 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 82e14cf08d8a..6147ae33ac4e 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -496,6 +496,118 @@ status = "okay"; firmware-name = "qcom/msm8916/wcnss.mdt"; }; + + camera_vdddo_1v8: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdddo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + camera_vdda_2v8: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdda"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + camera_vddd_1v5: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "camera_vddd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + cci@1b0c000 { + status = "okay"; + i2c-bus@0 { + camera_rear@76 { + compatible = "ovti,ov5645"; + reg = <0x76>; + + enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + clock-names = "xclk"; + assigned-clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + assigned-clock-rates = <23880000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v8>; + vddd-supply = <&camera_vddd_1v5>; + + status = "disabled"; + + port { + ov5645_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + + camera_rear@74 { + compatible = "ovti,ov5645"; + reg = <0x74>; + + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&msmgpio 28 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&camera_front_default>; + + clocks = <&gcc GCC_CAMSS_MCLK1_CLK>; + clock-names = "xclk"; + assigned-clocks = <&gcc GCC_CAMSS_MCLK1_CLK>; + assigned-clock-rates = <23880000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v8>; + vddd-supply = <&camera_vddd_1v5>; + + status = "disabled"; + + port { + ov5645_2_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&csiphy1_ep>; + }; + }; + }; + }; + }; + + camss@1b00000 { + status = "ok"; + ports { + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&ov5645_ep>; + status = "disabled"; + }; + }; + + port@1 { + reg = <1>; + csiphy1_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&ov5645_2_ep>; + status = "disabled"; + }; + }; + }; + }; }; usb2513 { |