Merge remote-tracking branch 'tsens-thermal/thermal-integration' into integration-linux-qcomltintegration-linux-qcomlt-20180813-135216-v4.18-256-g6f841652448d

9 files changed, 330 insertions, 104 deletions

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 06195e8f35e2..1d9e8cf61018 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -1,18 +1,28 @@
 * QCOM SoC Temperature Sensor (TSENS)
 
 Required properties:
-- compatible :
- - "qcom,msm8916-tsens" : For 8916 Family of SoCs
- - "qcom,msm8974-tsens" : For 8974 Family of SoCs
- - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+- compatible:
+  Must be one of the following:
+    - "qcom,msm8916-tsens" (MSM8916)
+    - "qcom,msm8974-tsens" (MSM8974)
+    - "qcom,msm8996-tsens" (MSM8996)
+    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
+    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
+  with version 2 of the TSENS IP. MSM8996 is the only exception because the
+  generic property did not exist when support was added.
+
+- reg: Address range of the thermal registers.
+  New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
+  register spaces separately, with order being TM before SROT.
+  See Example 2, below.
 
-- reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
 - #qcom,sensors: Number of sensors in tsens block
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
-Example:
+Example 1 (legacy support before a fallback tsens-v2 property was introduced):
 tsens: thermal-sensor@900000 {
 		compatible = "qcom,msm8916-tsens";
 		reg = <0x4a8000 0x2000>;
@@ -20,3 +30,12 @@ tsens: thermal-sensor@900000 {
 		nvmem-cell-names = "caldata", "calsel";
 		#thermal-sensor-cells = <1>;
 	};
+
+Example 2 (for any platform containing v2 of the TSENS IP):
+tsens0: thermal-sensor@c263000 {
+		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+		reg = <0xc263000 0x1ff>, /* TM */
+			<0xc222000 0x1ff>; /* SROT */
+		#qcom,sensors = <13>;
+		#thermal-sensor-cells = <1>;
+	};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index bd7633dff2e5..c2dca3a30091 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -965,9 +965,19 @@
 			status = "disabled";
 		};
 
-		tsens0: thermal-sensor@4a8000 {
+		tsens0: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8996-tsens";
-			reg = <0x4a8000 0x2000>;
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@4ad000 {
+			compatible = "qcom,msm8996-tsens";
+			reg = <0x4ad000 0x1000>, /* TM */
+			      <0x4ac000 0x1000>; /* SROT */
+			#qcom,sensors = <8>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index accd522f28c7..26600c0f0b7f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1527,6 +1527,22 @@
 			};
 		};
 
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc263000 0x1ff>, /* TM */
+			      <0xc222000 0x1ff>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc265000 0x1ff>, /* TM */
+			      <0xc223000 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0x1100>,
@@ -1741,4 +1757,174 @@
 			status = "disabled";
 		};
 	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu_alert4: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit4: trip1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu_alert5: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit5: trip1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu_alert6: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit6: trip1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu_alert7: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit7: trip1 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index 2cc2193637e7..a821929ede0b 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
diff --git a/drivers/thermal/qcom/tsens-8996.c b/drivers/thermal/qcom/tsens-8996.c
deleted file mode 100644
index e1f77818d8fa..000000000000
--- a/drivers/thermal/qcom/tsens-8996.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include "tsens.h"
-
-#define STATUS_OFFSET	0x10a0
-#define LAST_TEMP_MASK	0xfff
-#define STATUS_VALID_BIT	BIT(21)
-#define CODE_SIGN_BIT		BIT(11)
-
-static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
-{
-	struct tsens_sensor *s = &tmdev->sensor[id];
-	u32 code;
-	unsigned int sensor_addr;
-	int last_temp = 0, last_temp2 = 0, last_temp3 = 0, ret;
-
-	sensor_addr = STATUS_OFFSET + s->hw_id * 4;
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
-	if (ret)
-		return ret;
-	last_temp = code & LAST_TEMP_MASK;
-	if (code & STATUS_VALID_BIT)
-		goto done;
-
-	/* Try a second time */
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
-	if (ret)
-		return ret;
-	if (code & STATUS_VALID_BIT) {
-		last_temp = code & LAST_TEMP_MASK;
-		goto done;
-	} else {
-		last_temp2 = code & LAST_TEMP_MASK;
-	}
-
-	/* Try a third/last time */
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
-	if (ret)
-		return ret;
-	if (code & STATUS_VALID_BIT) {
-		last_temp = code & LAST_TEMP_MASK;
-		goto done;
-	} else {
-		last_temp3 = code & LAST_TEMP_MASK;
-	}
-
-	if (last_temp == last_temp2)
-		last_temp = last_temp2;
-	else if (last_temp2 == last_temp3)
-		last_temp = last_temp3;
-done:
-	/* Code sign bit is the sign extension for a negative value */
-	if (last_temp & CODE_SIGN_BIT)
-		last_temp |= ~CODE_SIGN_BIT;
-
-	/* Temperatures are in deciCelicius */
-	*temp = last_temp * 100;
-
-	return 0;
-}
-
-static const struct tsens_ops ops_8996 = {
-	.init		= init_common,
-	.get_temp	= get_temp_8996,
-};
-
-const struct tsens_data data_8996 = {
-	.num_sensors	= 13,
-	.ops		= &ops_8996,
-};
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index b1449ad67fc0..6207d8d92351 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of_address.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include "tsens.h"
@@ -103,11 +104,11 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
 {
 	struct tsens_sensor *s = &tmdev->sensor[id];
 	u32 code;
-	unsigned int sensor_addr;
+	unsigned int status_reg;
 	int last_temp = 0, ret;
 
-	sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
+	status_reg = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
+	ret = regmap_read(tmdev->map, status_reg, &code);
 	if (ret)
 		return ret;
 	last_temp = code & SN_ST_TEMP_MASK;
@@ -126,16 +127,28 @@ static const struct regmap_config tsens_config = {
 int __init init_common(struct tsens_device *tmdev)
 {
 	void __iomem *base;
+	struct resource *res;
+	struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
 
-	base = of_iomap(tmdev->dev->of_node, 0);
-	if (!base)
+	if (!op)
 		return -EINVAL;
 
+	/* The driver only uses the TM register address space for now */
+	if (op->num_resources > 1) {
+		tmdev->tm_offset = 0;
+	} else {
+		/* old DTs where SROT and TM were in a contiguous 2K block */
+		tmdev->tm_offset = 0x1000;
+	}
+
+	res = platform_get_resource(op, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&op->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
 	tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
-	if (IS_ERR(tmdev->map)) {
-		iounmap(base);
+	if (IS_ERR(tmdev->map))
 		return PTR_ERR(tmdev->map);
-	}
 
 	return 0;
 }
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
new file mode 100644
index 000000000000..44da02f594ac
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include "tsens.h"
+
+#define STATUS_OFFSET		0xa0
+#define LAST_TEMP_MASK		0xfff
+#define STATUS_VALID_BIT	BIT(21)
+
+static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
+{
+	struct tsens_sensor *s = &tmdev->sensor[id];
+	u32 code;
+	unsigned int status_reg;
+	u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0;
+	int ret;
+
+	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
+	ret = regmap_read(tmdev->map, status_reg, &code);
+	if (ret)
+		return ret;
+	last_temp = code & LAST_TEMP_MASK;
+	if (code & STATUS_VALID_BIT)
+		goto done;
+
+	/* Try a second time */
+	ret = regmap_read(tmdev->map, status_reg, &code);
+	if (ret)
+		return ret;
+	if (code & STATUS_VALID_BIT) {
+		last_temp = code & LAST_TEMP_MASK;
+		goto done;
+	} else {
+		last_temp2 = code & LAST_TEMP_MASK;
+	}
+
+	/* Try a third/last time */
+	ret = regmap_read(tmdev->map, status_reg, &code);
+	if (ret)
+		return ret;
+	if (code & STATUS_VALID_BIT) {
+		last_temp = code & LAST_TEMP_MASK;
+		goto done;
+	} else {
+		last_temp3 = code & LAST_TEMP_MASK;
+	}
+
+	if (last_temp == last_temp2)
+		last_temp = last_temp2;
+	else if (last_temp2 == last_temp3)
+		last_temp = last_temp3;
+done:
+	/* Convert temperature from deciCelsius to milliCelsius */
+	*temp = sign_extend32(last_temp, fls(LAST_TEMP_MASK) - 1) * 100;
+
+	return 0;
+}
+
+static const struct tsens_ops ops_generic_v2 = {
+	.init		= init_common,
+	.get_temp	= get_temp_tsens_v2,
+};
+
+const struct tsens_data data_tsens_v2 = {
+	.ops            = &ops_generic_v2,
+};
+
+/* Kept around for backward compatibility with old msm8996.dtsi */
+const struct tsens_data data_8996 = {
+	.num_sensors	= 13,
+	.ops		= &ops_generic_v2,
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 3440166c2ae9..a2c9bfae3d86 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -72,6 +72,9 @@ static const struct of_device_id tsens_table[] = {
 	}, {
 		.compatible = "qcom,msm8996-tsens",
 		.data = &data_8996,
+	}, {
+		.compatible = "qcom,tsens-v2",
+		.data = &data_tsens_v2,
 	},
 	{}
 };
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 911c1978892b..14331eb45a86 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -77,9 +77,8 @@ struct tsens_device {
 	struct device			*dev;
 	u32				num_sensors;
 	struct regmap			*map;
-	struct regmap_field		*status_field;
+	u32				tm_offset;
 	struct tsens_context		ctx;
-	bool				trdy;
 	const struct tsens_ops		*ops;
 	struct tsens_sensor		sensor[0];
 };
@@ -89,6 +88,9 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
 int init_common(struct tsens_device *);
 int get_temp_common(struct tsens_device *, int, int *);
 
-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
+/* TSENS v1 targets */
+extern const struct tsens_data data_8916, data_8974, data_8960;
+/* TSENS v2 targets */
+extern const struct tsens_data data_8996, data_tsens_v2;
 
 #endif /* __QCOM_TSENS_H__ */