diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-apq8064-ifc6410.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 192 |
1 files changed, 191 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index f3100da082b2..19b16218e3c8 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,5 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; @@ -14,6 +15,18 @@ stdout-path = "serial0:115200n8"; }; + pwrseq { + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios &bt_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>, + <&pm8921_gpio 44 GPIO_ACTIVE_LOW>; + }; + }; + soc { pinctrl@800000 { card_detect: card_detect { @@ -66,6 +79,12 @@ qcom,switch-mode-frequency = <3200000>; }; + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + pm8921_l3: l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; @@ -99,6 +118,14 @@ pm8921_lvs1: lvs1 { bias-pull-down; }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; }; }; @@ -114,6 +141,61 @@ regulator-boot-on; }; + hdmi: qcom,hdmi-tx@4a00000 { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; + hdmi-mux-supply = <&ext_3p3v>; + }; + + mdp: qcom,mdp@5100000 { + status = "okay"; + lvds-vccs-3p3v-supply = <&ext_3p3v>; + lvds-pll-vdda-supply = <&pm8921_l2>; + lvds-vdda-supply = <&pm8921_lvs7>; + + port { + lvds_out: endpoint { + remote-endpoint = <&auo_in>; + }; + }; + }; + + panel_3p3v: panel_3p3v { + compatible = "regulator-fixed"; + pinctrl-0 = <&disp_en_gpios>; + pinctrl-names = "default"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "panel_en_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + backlight: backlight{ + pinctrl-0 = <&pwm_bl_gpios>; + pinctrl-names = "default"; + compatible = "gpio-backlight"; + gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>; + default-on; + }; + + panel: auo,b101xtn01 { + status = "okay"; + compatible = "auo,b101xtn01"; + + ddc-i2c-bus = <&i2c3>; + backlight = <&backlight>; + power-supply = <&panel_3p3v>; + port { + auo_in: endpoint { + remote-endpoint = <&lvds_out>; + }; + }; + }; + gsbi3: gsbi@16200000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; @@ -144,7 +226,7 @@ gsbi@16500000 { status = "ok"; - qcom,mode = <GSBI_PROT_I2C_UART>; + qcom,mode = <GSBI_PROT_UART_W_FC>; serial@16540000 { status = "ok"; @@ -162,6 +244,10 @@ }; }; + adm: dma@18320000 { + status = "okay"; + }; + sata_phy0: phy@1b400000 { status = "okay"; }; @@ -209,6 +295,93 @@ usb4: usb@12530000 { status = "okay"; }; + + /* on board fixed 3.3v supply */ + v3p3_pcieclk: v3p3-pcieclk { + compatible = "regulator-fixed"; + regulator-name = "PCIE V3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pci@1b500000 { + status = "ok"; + pcie-clk-supply = <&v3p3_pcieclk>; + avdd-supply = <&pm8921_s3>; + vdd-supply = <&pm8921_lvs6>; + ext-3p3v-supply = <&ext_3p3v>; + qcom,external-phy-refclk; + reset-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <¬ify_led>; + + led@1 { + label = "apq8064:green:user1"; + gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + + pwm_bl_gpios: pwm-bl-gpios { + pios { + pins = "gpio26"; + bias-disable; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + power-source = <PM8921_GPIO_S4>; + }; + }; + + disp_en_gpios: disp-en-gpios { + pios { + pins = "gpio36"; + bias-disable; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + power-source = <PM8921_GPIO_S4>; + }; + }; + + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + + bt_gpios: bt-gpio { + pios { + pins = "gpio44"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + + notify_led: nled { + pios { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; + }; + }; amba { /* eMMC */ @@ -231,7 +404,24 @@ status = "okay"; vmmc-supply = <&ext_3p3v>; vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; }; + +&CPU0 { + cpu-supply = <&saw0>; +}; + +&CPU1 { + cpu-supply = <&saw1>; +}; + +&CPU2 { + cpu-supply = <&saw2>; +}; + +&CPU3 { + cpu-supply = <&saw3>; +}; |