diff options
Diffstat (limited to 'include/linux')
72 files changed, 1634 insertions, 339 deletions
diff --git a/include/linux/atalk.h b/include/linux/atalk.h index d34c187432e..f57c36881c4 100644 --- a/include/linux/atalk.h +++ b/include/linux/atalk.h @@ -3,6 +3,7 @@ #include <linux/types.h> #include <asm/byteorder.h> +#include <linux/socket.h> /* * AppleTalk networking structures @@ -28,7 +29,7 @@ struct atalk_addr { }; struct sockaddr_at { - sa_family_t sat_family; + __kernel_sa_family_t sat_family; __u8 sat_port; struct atalk_addr sat_addr; char sat_zero[8]; diff --git a/include/linux/ax25.h b/include/linux/ax25.h index 56c11f0dbd8..74c89a41732 100644 --- a/include/linux/ax25.h +++ b/include/linux/ax25.h @@ -47,7 +47,7 @@ typedef struct { } ax25_address; struct sockaddr_ax25 { - sa_family_t sax25_family; + __kernel_sa_family_t sax25_family; ax25_address sax25_call; int sax25_ndigis; /* Digipeater ax25_address sets follow */ diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 8c96654bef1..5dbd7055cb8 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -6,6 +6,7 @@ #include <linux/bcma/bcma_driver_chipcommon.h> #include <linux/bcma/bcma_driver_pci.h> +#include <linux/bcma/bcma_driver_mips.h> #include <linux/ssb/ssb.h> /* SPROM sharing */ #include "bcma_regs.h" @@ -14,9 +15,9 @@ struct bcma_device; struct bcma_bus; enum bcma_hosttype { - BCMA_HOSTTYPE_NONE, BCMA_HOSTTYPE_PCI, BCMA_HOSTTYPE_SDIO, + BCMA_HOSTTYPE_SOC, }; struct bcma_chipinfo { @@ -130,6 +131,7 @@ struct bcma_device { struct device dev; struct device *dma_dev; + unsigned int irq; bool dev_registered; @@ -138,6 +140,9 @@ struct bcma_device { u32 addr; u32 wrap; + void __iomem *io_addr; + void __iomem *io_wrap; + void *drvdata; struct list_head list; }; @@ -190,9 +195,11 @@ struct bcma_bus { struct bcma_device *mapped_core; struct list_head cores; u8 nr_cores; + u8 init_done:1; struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; + struct bcma_drv_mips drv_mips; /* We decided to share SPROM struct with SSB as long as we do not need * any hacks for BCMA. This simplifies drivers code. */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index a0f684615ae..1526d965ed0 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -24,6 +24,7 @@ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define BCMA_CC_FLASHT_NFLASH 0x00000200 #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 @@ -178,6 +179,7 @@ #define BCMA_CC_PROG_CFG 0x0120 #define BCMA_CC_PROG_WAITCNT 0x0124 #define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -239,6 +241,64 @@ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ #define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 +#define BCMA_CC_PMU5_MAINPLL_MEM 2 +#define BCMA_CC_PMU5_MAINPLL_SSB 3 + +/* PLL usage in 4716/47162 */ +#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 + +/* PLL usage in 5356/5357 */ +#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 +#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 + +/* 4706 PMU */ +#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 + +/* ALP clock on pre-PMU chips */ +#define BCMA_CC_PMU_ALP_CLOCK 20000000 +/* HT clock for systems with PMU-enabled chipcommon */ +#define BCMA_CC_PMU_HT_CLOCK 80000000 + +/* PMU rev 5 (& 6) */ +#define BCMA_CC_PPL_P1P2_OFF 0 +#define BCMA_CC_PPL_P1_MASK 0x0f000000 +#define BCMA_CC_PPL_P1_SHIFT 24 +#define BCMA_CC_PPL_P2_MASK 0x00f00000 +#define BCMA_CC_PPL_P2_SHIFT 20 +#define BCMA_CC_PPL_M14_OFF 1 +#define BCMA_CC_PPL_MDIV_MASK 0x000000ff +#define BCMA_CC_PPL_MDIV_WIDTH 8 +#define BCMA_CC_PPL_NM5_OFF 2 +#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 +#define BCMA_CC_PPL_NDIV_SHIFT 20 +#define BCMA_CC_PPL_FMAB_OFF 3 +#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 +#define BCMA_CC_PPL_MRAT_SHIFT 28 +#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 +#define BCMA_CC_PPL_ABRAT_SHIFT 27 +#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff +#define BCMA_CC_PPL_PLLCTL_OFF 4 +#define BCMA_CC_PPL_PCHI_OFF 5 +#define BCMA_CC_PPL_PCHI_MASK 0x0000003f + +/* BCM4331 ChipControl numbers. */ +#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ +#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ +#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ +#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ +#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ +#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ +#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ +#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ +#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ @@ -247,14 +307,37 @@ struct bcma_chipcommon_pmu { u32 crystalfreq; /* The active crystal frequency (in kHz) */ }; +#ifdef CONFIG_BCMA_DRIVER_MIPS +struct bcma_pflash { + u8 buswidth; + u32 window; + u32 window_size; +}; + +struct bcma_serial_port { + void *regs; + unsigned long clockspeed; + unsigned int irq; + unsigned int baud_base; + unsigned int reg_shift; +}; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ + struct bcma_drv_cc { struct bcma_device *core; u32 status; u32 capabilities; u32 capabilities_ext; + u8 setup_done:1; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; +#ifdef CONFIG_BCMA_DRIVER_MIPS + struct bcma_pflash pflash; + + int nr_serial_ports; + struct bcma_serial_port serial_ports[4]; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ }; /* Register access */ @@ -275,6 +358,8 @@ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); extern void bcma_chipco_resume(struct bcma_drv_cc *cc); +void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); + extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); @@ -293,4 +378,13 @@ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); /* PMU support */ extern void bcma_pmu_init(struct bcma_drv_cc *cc); +extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, + u32 value); +extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, + u32 mask, u32 set); +extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); +extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); + #endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h new file mode 100644 index 00000000000..c0043645cdc --- /dev/null +++ b/include/linux/bcma/bcma_driver_mips.h @@ -0,0 +1,51 @@ +#ifndef LINUX_BCMA_DRIVER_MIPS_H_ +#define LINUX_BCMA_DRIVER_MIPS_H_ + +#define BCMA_MIPS_IPSFLAG 0x0F08 +/* which sbflags get routed to mips interrupt 1 */ +#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F +#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 +/* which sbflags get routed to mips interrupt 2 */ +#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 +#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 +/* which sbflags get routed to mips interrupt 3 */ +#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 +#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 +/* which sbflags get routed to mips interrupt 4 */ +#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 +#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 + +/* MIPS 74K core registers */ +#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 +#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 +#define BCMA_MIPS_MIPS74K_BIST 0x000C +#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 +#define BCMA_MIPS_MIPS74K_INTMASK(int) \ + ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) +#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C +#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 +#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 +#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 +#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 + +#define BCMA_MIPS_OOBSELOUTA30 0x100 + +struct bcma_device; + +struct bcma_drv_mips { + struct bcma_device *core; + u8 setup_done:1; + unsigned int assigned_irqs; +}; + +#ifdef CONFIG_BCMA_DRIVER_MIPS +extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); +#else +static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } +#endif + +extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); + +extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); + +#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ diff --git a/include/linux/bcma/bcma_soc.h b/include/linux/bcma/bcma_soc.h new file mode 100644 index 00000000000..4203c5593b9 --- /dev/null +++ b/include/linux/bcma/bcma_soc.h @@ -0,0 +1,16 @@ +#ifndef LINUX_BCMA_SOC_H_ +#define LINUX_BCMA_SOC_H_ + +#include <linux/bcma/bcma.h> + +struct bcma_soc { + struct bcma_bus bus; + struct bcma_device core_cc; + struct bcma_device core_mips; +}; + +int __init bcma_host_soc_register(struct bcma_soc *soc); + +int bcma_bus_register(struct bcma_bus *bus); + +#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/include/linux/caif/caif_socket.h b/include/linux/caif/caif_socket.h index d9cb19b7cff..3f3bac6af7b 100644 --- a/include/linux/caif/caif_socket.h +++ b/include/linux/caif/caif_socket.h @@ -9,12 +9,7 @@ #define _LINUX_CAIF_SOCKET_H #include <linux/types.h> - -#ifdef __KERNEL__ #include <linux/socket.h> -#else -#include <sys/socket.h> -#endif /** * enum caif_link_selector - Physical Link Selection. @@ -144,7 +139,7 @@ enum caif_debug_service { * CAIF Channel. It defines the service to connect to on the modem. */ struct sockaddr_caif { - sa_family_t family; + __kernel_sa_family_t family; union { struct { __u8 type; /* type: enum caif_at_type */ diff --git a/include/linux/can.h b/include/linux/can.h index d18333302cb..9a19bcb3eea 100644 --- a/include/linux/can.h +++ b/include/linux/can.h @@ -8,8 +8,6 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_H @@ -78,7 +76,7 @@ struct can_frame { * @can_addr: protocol specific address information */ struct sockaddr_can { - sa_family_t can_family; + __kernel_sa_family_t can_family; int can_ifindex; union { /* transport protocol class address information (e.g. ISOTP) */ diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild index 8cb05aae661..c62b7f1728f 100644 --- a/include/linux/can/Kbuild +++ b/include/linux/can/Kbuild @@ -1,4 +1,5 @@ header-y += raw.h header-y += bcm.h +header-y += gw.h header-y += error.h header-y += netlink.h diff --git a/include/linux/can/bcm.h b/include/linux/can/bcm.h index 1432b278c52..3ebe387fea4 100644 --- a/include/linux/can/bcm.h +++ b/include/linux/can/bcm.h @@ -7,14 +7,13 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_BCM_H #define CAN_BCM_H #include <linux/types.h> +#include <linux/can.h> /** * struct bcm_msg_head - head of messages to/from the broadcast manager diff --git a/include/linux/can/core.h b/include/linux/can/core.h index 5ce6b5d62ec..0ccc1cd28b9 100644 --- a/include/linux/can/core.h +++ b/include/linux/can/core.h @@ -8,8 +8,6 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_CORE_H diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index cc0bb496166..a0969fcb72b 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -8,7 +8,6 @@ * * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com> * - * Send feedback to <socketcan-users@lists.berlios.de> */ #ifndef CAN_DEV_H diff --git a/include/linux/can/error.h b/include/linux/can/error.h index 5958074302a..63e855ea6b8 100644 --- a/include/linux/can/error.h +++ b/include/linux/can/error.h @@ -7,8 +7,6 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_ERROR_H diff --git a/include/linux/can/gw.h b/include/linux/can/gw.h new file mode 100644 index 00000000000..8e1db18c3cb --- /dev/null +++ b/include/linux/can/gw.h @@ -0,0 +1,162 @@ +/* + * linux/can/gw.h + * + * Definitions for CAN frame Gateway/Router/Bridge + * + * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> + * Copyright (c) 2011 Volkswagen Group Electronic Research + * All rights reserved. + * + */ + +#ifndef CAN_GW_H +#define CAN_GW_H + +#include <linux/types.h> +#include <linux/can.h> + +struct rtcanmsg { + __u8 can_family; + __u8 gwtype; + __u16 flags; +}; + +/* CAN gateway types */ +enum { + CGW_TYPE_UNSPEC, + CGW_TYPE_CAN_CAN, /* CAN->CAN routing */ + __CGW_TYPE_MAX +}; + +#define CGW_TYPE_MAX (__CGW_TYPE_MAX - 1) + +/* CAN rtnetlink attribute definitions */ +enum { + CGW_UNSPEC, + CGW_MOD_AND, /* CAN frame modification binary AND */ + CGW_MOD_OR, /* CAN frame modification binary OR */ + CGW_MOD_XOR, /* CAN frame modification binary XOR */ + CGW_MOD_SET, /* CAN frame modification set alternate values */ + CGW_CS_XOR, /* set data[] XOR checksum into data[index] */ + CGW_CS_CRC8, /* set data[] CRC8 checksum into data[index] */ + CGW_HANDLED, /* number of handled CAN frames */ + CGW_DROPPED, /* number of dropped CAN frames */ + CGW_SRC_IF, /* ifindex of source network interface */ + CGW_DST_IF, /* ifindex of destination network interface */ + CGW_FILTER, /* specify struct can_filter on source CAN device */ + __CGW_MAX +}; + +#define CGW_MAX (__CGW_MAX - 1) + +#define CGW_FLAGS_CAN_ECHO 0x01 +#define CGW_FLAGS_CAN_SRC_TSTAMP 0x02 + +#define CGW_MOD_FUNCS 4 /* AND OR XOR SET */ + +/* CAN frame elements that are affected by curr. 3 CAN frame modifications */ +#define CGW_MOD_ID 0x01 +#define CGW_MOD_DLC 0x02 +#define CGW_MOD_DATA 0x04 + +#define CGW_FRAME_MODS 3 /* ID DLC DATA */ + +#define MAX_MODFUNCTIONS (CGW_MOD_FUNCS * CGW_FRAME_MODS) + +struct cgw_frame_mod { + struct can_frame cf; + __u8 modtype; +} __attribute__((packed)); + +#define CGW_MODATTR_LEN sizeof(struct cgw_frame_mod) + +struct cgw_csum_xor { + __s8 from_idx; + __s8 to_idx; + __s8 result_idx; + __u8 init_xor_val; +} __attribute__((packed)); + +struct cgw_csum_crc8 { + __s8 from_idx; + __s8 to_idx; + __s8 result_idx; + __u8 init_crc_val; + __u8 final_xor_val; + __u8 crctab[256]; + __u8 profile; + __u8 profile_data[20]; +} __attribute__((packed)); + +/* length of checksum operation parameters. idx = index in CAN frame data[] */ +#define CGW_CS_XOR_LEN sizeof(struct cgw_csum_xor) +#define CGW_CS_CRC8_LEN sizeof(struct cgw_csum_crc8) + +/* CRC8 profiles (compute CRC for additional data elements - see below) */ +enum { + CGW_CRC8PRF_UNSPEC, + CGW_CRC8PRF_1U8, /* compute one additional u8 value */ + CGW_CRC8PRF_16U8, /* u8 value table indexed by data[1] & 0xF */ + CGW_CRC8PRF_SFFID_XOR, /* (can_id & 0xFF) ^ (can_id >> 8 & 0xFF) */ + __CGW_CRC8PRF_MAX +}; + +#define CGW_CRC8PRF_MAX (__CGW_CRC8PRF_MAX - 1) + +/* + * CAN rtnetlink attribute contents in detail + * + * CGW_XXX_IF (length 4 bytes): + * Sets an interface index for source/destination network interfaces. + * For the CAN->CAN gwtype the indices of _two_ CAN interfaces are mandatory. + * + * CGW_FILTER (length 8 bytes): + * Sets a CAN receive filter for the gateway job specified by the + * struct can_filter described in include/linux/can.h + * + * CGW_MOD_XXX (length 17 bytes): + * Specifies a modification that's done to a received CAN frame before it is + * send out to the destination interface. + * + * <struct can_frame> data used as operator + * <u8> affected CAN frame elements + * + * CGW_CS_XOR (length 4 bytes): + * Set a simple XOR checksum starting with an initial value into + * data[result-idx] using data[start-idx] .. data[end-idx] + * + * The XOR checksum is calculated like this: + * + * xor = init_xor_val + * + * for (i = from_idx .. to_idx) + * xor ^= can_frame.data[i] + * + * can_frame.data[ result_idx ] = xor + * + * CGW_CS_CRC8 (length 282 bytes): + * Set a CRC8 value into data[result-idx] using a given 256 byte CRC8 table, + * a given initial value and a defined input data[start-idx] .. data[end-idx]. + * Finally the result value is XOR'ed with the final_xor_val. + * + * The CRC8 checksum is calculated like this: + * + * crc = init_crc_val + * + * for (i = from_idx .. to_idx) + * crc = crctab[ crc ^ can_frame.data[i] ] + * + * can_frame.data[ result_idx ] = crc ^ final_xor_val + * + * The calculated CRC may contain additional source data elements that can be + * defined in the handling of 'checksum profiles' e.g. shown in AUTOSAR specs + * like http://www.autosar.org/download/R4.0/AUTOSAR_SWS_E2ELibrary.pdf + * E.g. the profile_data[] may contain additional u8 values (called DATA_IDs) + * that are used depending on counter values inside the CAN frame data[]. + * So far only three profiles have been implemented for illustration. + * + * Remark: In general the attribute data is a linear buffer. + * Beware of sending unpacked or aligned structs! + */ + +#endif diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h index 34542d374dd..14966ddb7df 100644 --- a/include/linux/can/netlink.h +++ b/include/linux/can/netlink.h @@ -5,8 +5,6 @@ * * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com> * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_NETLINK_H diff --git a/include/linux/can/raw.h b/include/linux/can/raw.h index b2a0f87492c..781f3a3701b 100644 --- a/include/linux/can/raw.h +++ b/include/linux/can/raw.h @@ -8,8 +8,6 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_RAW_H diff --git a/include/linux/capability.h b/include/linux/capability.h index c4211235000..a63d13d84ad 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -198,7 +198,7 @@ struct cpu_vfs_cap_data { /* Allow modification of routing tables */ /* Allow setting arbitrary process / process group ownership on sockets */ -/* Allow binding to any address for transparent proxying */ +/* Allow binding to any address for transparent proxying (also via NET_RAW) */ /* Allow setting TOS (type of service) */ /* Allow setting promiscuous mode */ /* Allow clearing driver statistics */ @@ -210,6 +210,7 @@ struct cpu_vfs_cap_data { /* Allow use of RAW sockets */ /* Allow use of PACKET sockets */ +/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */ #define CAP_NET_RAW 13 diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h index 12c517b51ca..d03612b196e 100644 --- a/include/linux/cn_proc.h +++ b/include/linux/cn_proc.h @@ -54,6 +54,7 @@ struct proc_event { PROC_EVENT_GID = 0x00000040, PROC_EVENT_SID = 0x00000080, PROC_EVENT_PTRACE = 0x00000100, + PROC_EVENT_COMM = 0x00000200, /* "next" should be 0x00000400 */ /* "last" is the last process event: exit */ PROC_EVENT_EXIT = 0x80000000 @@ -103,6 +104,12 @@ struct proc_event { __kernel_pid_t tracer_tgid; } ptrace; + struct comm_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + char comm[16]; + } comm; + struct exit_proc_event { __kernel_pid_t process_pid; __kernel_pid_t process_tgid; @@ -118,6 +125,7 @@ void proc_exec_connector(struct task_struct *task); void proc_id_connector(struct task_struct *task, int which_id); void proc_sid_connector(struct task_struct *task); void proc_ptrace_connector(struct task_struct *task, int which_id); +void proc_comm_connector(struct task_struct *task); void proc_exit_connector(struct task_struct *task); #else static inline void proc_fork_connector(struct task_struct *task) @@ -133,6 +141,9 @@ static inline void proc_id_connector(struct task_struct *task, static inline void proc_sid_connector(struct task_struct *task) {} +static inline void proc_comm_connector(struct task_struct *task) +{} + static inline void proc_ptrace_connector(struct task_struct *task, int ptrace_id) {} diff --git a/include/linux/device.h b/include/linux/device.h index 4639419522d..46751bdb71d 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -350,6 +350,8 @@ struct class_attribute { char *buf); ssize_t (*store)(struct class *class, struct class_attribute *attr, const char *buf, size_t count); + const void *(*namespace)(struct class *class, + const struct class_attribute *attr); }; #define CLASS_ATTR(_name, _mode, _show, _store) \ diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index c6e427ab65f..45f00b61c09 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -117,99 +117,101 @@ struct ethtool_eeprom { __u8 data[0]; }; -/* for configuring coalescing parameters of chip */ +/** + * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates + * @cmd: ETHTOOL_{G,S}COALESCE + * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after + * a packet arrives. + * @rx_max_coalesced_frames: Maximum number of packets to receive + * before an RX interrupt. + * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after + * a packet is sent. + * @tx_max_coalesced_frames: Maximum number of packets to be sent + * before a TX interrupt. + * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @stats_block_coalesce_usecs: How many usecs to delay in-memory + * statistics block updates. Some drivers do not have an + * in-memory statistic block, and in such cases this value is + * ignored. This value must not be zero. + * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing. + * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing. + * @pkt_rate_low: Threshold for low packet rate (packets per second). + * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is below @pkt_rate_low. + * @rx_max_coalesced_frames_low: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is below @pkt_rate_low. + * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is below @pkt_rate_low. + * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before + * a TX interrupt, when the packet rate is below @pkt_rate_low. + * @pkt_rate_high: Threshold for high packet rate (packets per second). + * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is above @pkt_rate_high. + * @rx_max_coalesced_frames_high: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is above @pkt_rate_high. + * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is above @pkt_rate_high. + * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before + * a TX interrupt, when the packet rate is above @pkt_rate_high. + * @rate_sample_interval: How often to do adaptive coalescing packet rate + * sampling, measured in seconds. Must not be zero. + * + * Each pair of (usecs, max_frames) fields specifies this exit + * condition for interrupt coalescing: + * (usecs > 0 && time_since_first_completion >= usecs) || + * (max_frames > 0 && completed_frames >= max_frames) + * It is illegal to set both usecs and max_frames to zero as this + * would cause interrupts to never be generated. To disable + * coalescing, set usecs = 0 and max_frames = 1. + * + * Some implementations ignore the value of max_frames and use the + * condition: + * time_since_first_completion >= usecs + * This is deprecated. Drivers for hardware that does not support + * counting completions should validate that max_frames == !rx_usecs. + * + * Adaptive RX/TX coalescing is an algorithm implemented by some + * drivers to improve latency under low packet rates and improve + * throughput under high packet rates. Some drivers only implement + * one of RX or TX adaptive coalescing. Anything not implemented by + * the driver causes these values to be silently ignored. + * + * When the packet rate is below @pkt_rate_high but above + * @pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ struct ethtool_coalesce { - __u32 cmd; /* ETHTOOL_{G,S}COALESCE */ - - /* How many usecs to delay an RX interrupt after - * a packet arrives. If 0, only rx_max_coalesced_frames - * is used. - */ + __u32 cmd; __u32 rx_coalesce_usecs; - - /* How many packets to delay an RX interrupt after - * a packet arrives. If 0, only rx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause RX interrupts to never be - * generated. - */ __u32 rx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ __u32 rx_coalesce_usecs_irq; __u32 rx_max_coalesced_frames_irq; - - /* How many usecs to delay a TX interrupt after - * a packet is sent. If 0, only tx_max_coalesced_frames - * is used. - */ __u32 tx_coalesce_usecs; - - /* How many packets to delay a TX interrupt after - * a packet is sent. If 0, only tx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause TX interrupts to never be - * generated. - */ __u32 tx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ __u32 tx_coalesce_usecs_irq; __u32 tx_max_coalesced_frames_irq; - - /* How many usecs to delay in-memory statistics - * block updates. Some drivers do not have an in-memory - * statistic block, and in such cases this value is ignored. - * This value must not be zero. - */ __u32 stats_block_coalesce_usecs; - - /* Adaptive RX/TX coalescing is an algorithm implemented by - * some drivers to improve latency under low packet rates and - * improve throughput under high packet rates. Some drivers - * only implement one of RX or TX adaptive coalescing. Anything - * not implemented by the driver causes these values to be - * silently ignored. - */ __u32 use_adaptive_rx_coalesce; __u32 use_adaptive_tx_coalesce; - - /* When the packet rate (measured in packets per second) - * is below pkt_rate_low, the {rx,tx}_*_low parameters are - * used. - */ __u32 pkt_rate_low; __u32 rx_coalesce_usecs_low; __u32 rx_max_coalesced_frames_low; __u32 tx_coalesce_usecs_low; __u32 tx_max_coalesced_frames_low; - - /* When the packet rate is below pkt_rate_high but above - * pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ - - /* When the packet rate is (measured in packets per second) - * is above pkt_rate_high, the {rx,tx}_*_high parameters are - * used. - */ __u32 pkt_rate_high; __u32 rx_coalesce_usecs_high; __u32 rx_max_coalesced_frames_high; __u32 tx_coalesce_usecs_high; __u32 tx_max_coalesced_frames_high; - - /* How often to do adaptive coalescing packet rate sampling, - * measured in seconds. Must not be zero. - */ __u32 rate_sample_interval; }; @@ -444,7 +446,7 @@ struct ethtool_flow_ext { }; /** - * struct ethtool_rx_flow_spec - specification for RX flow filter + * struct ethtool_rx_flow_spec - classification rule for RX flows * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW * @h_u: Flow fields to match (dependent on @flow_type) * @h_ext: Additional fields to match @@ -454,7 +456,9 @@ struct ethtool_flow_ext { * includes the %FLOW_EXT flag. * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC * if packets should be discarded - * @location: Index of filter in hardware table + * @location: Location of rule in the table. Locations must be + * numbered such that a flow matching multiple rules will be + * classified according to the first (lowest numbered) rule. */ struct ethtool_rx_flow_spec { __u32 flow_type; @@ -473,9 +477,9 @@ struct ethtool_rx_flow_spec { * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW * @data: Command-dependent value - * @fs: Flow filter specification + * @fs: Flow classification rule * @rule_cnt: Number of rules to be affected - * @rule_locs: Array of valid rule indices + * @rule_locs: Array of used rule locations * * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following @@ -487,23 +491,20 @@ struct ethtool_rx_flow_spec { * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined * rules on return. * - * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the index of an - * existing filter rule on entry and @fs contains the rule on return. + * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an + * existing rule on entry and @fs contains the rule on return. * * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the * user buffer for @rule_locs on entry. On return, @data is the size - * of the filter table and @rule_locs contains the indices of the - * defined rules. + * of the rule table, @rule_cnt is the number of defined rules, and + * @rule_locs contains the locations of the defined rules. Drivers + * must use the second parameter to get_rxnfc() instead of @rule_locs. * - * For %ETHTOOL_SRXCLSRLINS, @fs specifies the filter rule to add or - * update. @fs.@location specifies the index to use and must not be - * ignored. + * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update. + * @fs.@location specifies the location to use and must not be ignored. * - * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the index of an - * existing filter rule on entry. - * - * Implementation of indexed classification rules generally requires a - * TCAM. + * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an + * existing rule on entry. */ struct ethtool_rxnfc { __u32 cmd; @@ -726,6 +727,9 @@ enum ethtool_sfeatures_retval_bits { /* needed by dev_disable_lro() */ extern int __ethtool_set_flags(struct net_device *dev, u32 flags); +extern int __ethtool_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd); + /** * enum ethtool_phys_id_state - indicator state for physical identification * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated @@ -936,7 +940,7 @@ struct ethtool_ops { int (*set_priv_flags)(struct net_device *, u32); int (*get_sset_count)(struct net_device *, int); int (*get_rxnfc)(struct net_device *, - struct ethtool_rxnfc *, void *); + struct ethtool_rxnfc *, u32 *rule_locs); int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *); int (*flash_device)(struct net_device *, struct ethtool_flash *); int (*reset)(struct net_device *, u32 *); diff --git a/include/linux/filter.h b/include/linux/filter.h index 741956fa5bf..8eeb205f298 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -155,7 +155,7 @@ extern unsigned int sk_run_filter(const struct sk_buff *skb, const struct sock_filter *filter); extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); extern int sk_detach_filter(struct sock *sk); -extern int sk_chk_filter(struct sock_filter *filter, int flen); +extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen); #ifdef CONFIG_BPF_JIT extern void bpf_jit_compile(struct sk_filter *fp); diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 54c87896087..48363c3c40f 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -130,6 +130,8 @@ #define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK 0x0060 /* A-MSDU 802.11n */ #define IEEE80211_QOS_CTL_A_MSDU_PRESENT 0x0080 +/* Mesh Control 802.11s */ +#define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT 0x0100 /* U-APSD queue for WMM IEs sent by AP */ #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7) @@ -629,9 +631,14 @@ struct ieee80211_rann_ie { u8 rann_ttl; u8 rann_addr[6]; u32 rann_seq; + u32 rann_interval; u32 rann_metric; } __attribute__ ((packed)); +enum ieee80211_rann_flags { + RANN_FLAG_IS_GATE = 1 << 0, +}; + #define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { @@ -736,19 +743,10 @@ struct ieee80211_mgmt { __le16 params; __le16 reason_code; } __attribute__((packed)) delba; - struct{ + struct { u8 action_code; - /* capab_info for open and confirm, - * reason for close - */ - __le16 aux; - /* Followed in plink_confirm by status - * code, AID and supported rates, - * and directly by supported rates in - * plink_open and plink_close - */ u8 variable[0]; - } __attribute__((packed)) plink_action; + } __attribute__((packed)) self_prot; struct{ u8 action_code; u8 variable[0]; @@ -761,6 +759,12 @@ struct ieee80211_mgmt { u8 action; u8 smps_control; } __attribute__ ((packed)) ht_smps; + struct { + u8 action_code; + u8 dialog_token; + __le16 capability; + u8 variable[0]; + } __packed tdls_discover_resp; } u; } __attribute__ ((packed)) action; } u; @@ -779,6 +783,13 @@ struct ieee80211_mmie { u8 mic[8]; } __attribute__ ((packed)); +struct ieee80211_vendor_ie { + u8 element_id; + u8 len; + u8 oui[3]; + u8 oui_type; +} __packed; + /* Control frames */ struct ieee80211_rts { __le16 frame_control; @@ -800,6 +811,52 @@ struct ieee80211_pspoll { u8 ta[6]; } __attribute__ ((packed)); +/* TDLS */ + +/* Link-id information element */ +struct ieee80211_tdls_lnkie { + u8 ie_type; /* Link Identifier IE */ + u8 ie_len; + u8 bssid[6]; + u8 init_sta[6]; + u8 resp_sta[6]; +} __packed; + +struct ieee80211_tdls_data { + u8 da[6]; + u8 sa[6]; + __be16 ether_type; + u8 payload_type; + u8 category; + u8 action_code; + union { + struct { + u8 dialog_token; + __le16 capability; + u8 variable[0]; + } __packed setup_req; + struct { + __le16 status_code; + u8 dialog_token; + __le16 capability; + u8 variable[0]; + } __packed setup_resp; + struct { + __le16 status_code; + u8 dialog_token; + u8 variable[0]; + } __packed setup_cfm; + struct { + __le16 reason_code; + u8 variable[0]; + } __packed teardown; + struct { + u8 dialog_token; + u8 variable[0]; + } __packed discover_req; + } u; +} __packed; + /** * struct ieee80211_bar - HT Block Ack Request * @@ -816,9 +873,11 @@ struct ieee80211_bar { } __attribute__((packed)); /* 802.11 BAR control masks */ -#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 -#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 - +#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 +#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002 +#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 +#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000 +#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12 #define IEEE80211_HT_MCS_MASK_LEN 10 @@ -1189,16 +1248,13 @@ enum ieee80211_eid { WLAN_EID_TS_DELAY = 43, WLAN_EID_TCLAS_PROCESSING = 44, WLAN_EID_QOS_CAPA = 46, + /* 802.11z */ + WLAN_EID_LINK_ID = 101, /* 802.11s */ WLAN_EID_MESH_CONFIG = 113, WLAN_EID_MESH_ID = 114, WLAN_EID_LINK_METRIC_REPORT = 115, WLAN_EID_CONGESTION_NOTIFICATION = 116, - /* Note that the Peer Link IE has been replaced with the similar - * Peer Management IE. We will keep the former definition until mesh - * code is changed to comply with latest 802.11s drafts. - */ - WLAN_EID_PEER_LINK = 55, /* no longer in 802.11s drafts */ WLAN_EID_PEER_MGMT = 117, WLAN_EID_CHAN_SWITCH_PARAM = 118, WLAN_EID_MESH_AWAKE_WINDOW = 119, @@ -1277,13 +1333,11 @@ enum ieee80211_category { WLAN_CATEGORY_HT = 7, WLAN_CATEGORY_SA_QUERY = 8, WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9, + WLAN_CATEGORY_TDLS = 12, WLAN_CATEGORY_MESH_ACTION = 13, WLAN_CATEGORY_MULTIHOP_ACTION = 14, WLAN_CATEGORY_SELF_PROTECTED = 15, WLAN_CATEGORY_WMM = 17, - /* TODO: remove MESH_PATH_SEL after mesh is updated - * to current 802.11s draft */ - WLAN_CATEGORY_MESH_PATH_SEL = 32, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; @@ -1309,6 +1363,31 @@ enum ieee80211_ht_actioncode { WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, }; +/* Self Protected Action codes */ +enum ieee80211_self_protected_actioncode { + WLAN_SP_RESERVED = 0, + WLAN_SP_MESH_PEERING_OPEN = 1, + WLAN_SP_MESH_PEERING_CONFIRM = 2, + WLAN_SP_MESH_PEERING_CLOSE = 3, + WLAN_SP_MGK_INFORM = 4, + WLAN_SP_MGK_ACK = 5, +}; + +/* Mesh action codes */ +enum ieee80211_mesh_actioncode { + WLAN_MESH_ACTION_LINK_METRIC_REPORT, + WLAN_MESH_ACTION_HWMP_PATH_SELECTION, + WLAN_MESH_ACTION_GATE_ANNOUNCEMENT, + WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION, + WLAN_MESH_ACTION_MCCA_SETUP_REQUEST, + WLAN_MESH_ACTION_MCCA_SETUP_REPLY, + WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST, + WLAN_MESH_ACTION_MCCA_ADVERTISEMENT, + WLAN_MESH_ACTION_MCCA_TEARDOWN, + WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST, + WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE, +}; + /* Security key length */ enum ieee80211_key_len { WLAN_KEY_LEN_WEP40 = 5, @@ -1318,6 +1397,36 @@ enum ieee80211_key_len { WLAN_KEY_LEN_AES_CMAC = 16, }; +/* Public action codes */ +enum ieee80211_pub_actioncode { + WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14, +}; + +/* TDLS action codes */ +enum ieee80211_tdls_actioncode { + WLAN_TDLS_SETUP_REQUEST = 0, + WLAN_TDLS_SETUP_RESPONSE = 1, + WLAN_TDLS_SETUP_CONFIRM = 2, + WLAN_TDLS_TEARDOWN = 3, + WLAN_TDLS_PEER_TRAFFIC_INDICATION = 4, + WLAN_TDLS_CHANNEL_SWITCH_REQUEST = 5, + WLAN_TDLS_CHANNEL_SWITCH_RESPONSE = 6, + WLAN_TDLS_PEER_PSM_REQUEST = 7, + WLAN_TDLS_PEER_PSM_RESPONSE = 8, + WLAN_TDLS_PEER_TRAFFIC_RESPONSE = 9, + WLAN_TDLS_DISCOVERY_REQUEST = 10, +}; + +/* + * TDLS capabililites to be enabled in the 5th byte of the + * @WLAN_EID_EXT_CAPABILITY information element + */ +#define WLAN_EXT_CAPA5_TDLS_ENABLED BIT(5) +#define WLAN_EXT_CAPA5_TDLS_PROHIBITED BIT(6) + +/* TDLS specific payload type in the LLC/SNAP header */ +#define WLAN_TDLS_SNAP_RFTYPE 0x2 + /** * enum - mesh path selection protocol identifier * @@ -1453,6 +1562,9 @@ enum ieee80211_sa_query_action { #define WLAN_PMKID_LEN 16 +#define WLAN_OUI_WFA 0x506f9a +#define WLAN_OUI_TYPE_WFA_P2P 9 + /* * WMM/802.11e Tspec Element */ diff --git a/include/linux/if.h b/include/linux/if.h index 03489ca92de..db20bd4fd16 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -78,6 +78,7 @@ * datapath port */ #define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing * skbs on transmit */ +#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index a3d99ff6e3b..e473003e4bd 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -83,11 +83,13 @@ #define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ #define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ +#define ETH_P_TDLS 0x890D /* TDLS */ #define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ #define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ /* * Non DIX types. Won't clash for 1500 types. diff --git a/include/linux/if_link.h b/include/linux/if_link.h index 0ee969a5593..c52d4b5f872 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -279,6 +279,7 @@ enum { IFLA_VF_MAC, /* Hardware queue specific attributes */ IFLA_VF_VLAN, IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */ + IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ __IFLA_VF_MAX, }; @@ -300,13 +301,22 @@ struct ifla_vf_tx_rate { __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ }; +struct ifla_vf_spoofchk { + __u32 vf; + __u32 setting; +}; +#ifdef __KERNEL__ + +/* We don't want this structure exposed to user space */ struct ifla_vf_info { __u32 vf; __u8 mac[32]; __u32 vlan; __u32 qos; __u32 tx_rate; + __u32 spoofchk; }; +#endif /* VF ports management section * diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h index e28b2e4959d..d103dca5c56 100644 --- a/include/linux/if_macvlan.h +++ b/include/linux/if_macvlan.h @@ -64,6 +64,7 @@ struct macvlan_dev { int (*forward)(struct net_device *dev, struct sk_buff *skb); struct macvtap_queue *taps[MAX_MACVTAP_QUEUES]; int numvtaps; + int minor; }; static inline void macvlan_count_rx(const struct macvlan_dev *vlan, diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h index c1486060f5e..f3799295d23 100644 --- a/include/linux/if_packet.h +++ b/include/linux/if_packet.h @@ -61,6 +61,17 @@ struct tpacket_stats { unsigned int tp_drops; }; +struct tpacket_stats_v3 { + unsigned int tp_packets; + unsigned int tp_drops; + unsigned int tp_freeze_q_cnt; +}; + +union tpacket_stats_u { + struct tpacket_stats stats1; + struct tpacket_stats_v3 stats3; +}; + struct tpacket_auxdata { __u32 tp_status; __u32 tp_len; @@ -78,6 +89,7 @@ struct tpacket_auxdata { #define TP_STATUS_LOSING 0x4 #define TP_STATUS_CSUMNOTREADY 0x8 #define TP_STATUS_VLAN_VALID 0x10 /* auxdata has valid tp_vlan_tci */ +#define TP_STATUS_BLK_TMO 0x20 /* Tx ring - header status */ #define TP_STATUS_AVAILABLE 0x0 @@ -85,6 +97,9 @@ struct tpacket_auxdata { #define TP_STATUS_SENDING 0x2 #define TP_STATUS_WRONG_FORMAT 0x4 +/* Rx ring - feature request bits */ +#define TP_FT_REQ_FILL_RXHASH 0x1 + struct tpacket_hdr { unsigned long tp_status; unsigned int tp_len; @@ -111,11 +126,100 @@ struct tpacket2_hdr { __u16 tp_padding; }; +struct tpacket_hdr_variant1 { + __u32 tp_rxhash; + __u32 tp_vlan_tci; +}; + +struct tpacket3_hdr { + __u32 tp_next_offset; + __u32 tp_sec; + __u32 tp_nsec; + __u32 tp_snaplen; + __u32 tp_len; + __u32 tp_status; + __u16 tp_mac; + __u16 tp_net; + /* pkt_hdr variants */ + union { + struct tpacket_hdr_variant1 hv1; + }; +}; + +struct tpacket_bd_ts { + unsigned int ts_sec; + union { + unsigned int ts_usec; + unsigned int ts_nsec; + }; +}; + +struct tpacket_hdr_v1 { + __u32 block_status; + __u32 num_pkts; + __u32 offset_to_first_pkt; + + /* Number of valid bytes (including padding) + * blk_len <= tp_block_size + */ + __u32 blk_len; + + /* + * Quite a few uses of sequence number: + * 1. Make sure cache flush etc worked. + * Well, one can argue - why not use the increasing ts below? + * But look at 2. below first. + * 2. When you pass around blocks to other user space decoders, + * you can see which blk[s] is[are] outstanding etc. + * 3. Validate kernel code. + */ + __aligned_u64 seq_num; + + /* + * ts_last_pkt: + * + * Case 1. Block has 'N'(N >=1) packets and TMO'd(timed out) + * ts_last_pkt == 'time-stamp of last packet' and NOT the + * time when the timer fired and the block was closed. + * By providing the ts of the last packet we can absolutely + * guarantee that time-stamp wise, the first packet in the + * next block will never precede the last packet of the + * previous block. + * Case 2. Block has zero packets and TMO'd + * ts_last_pkt = time when the timer fired and the block + * was closed. + * Case 3. Block has 'N' packets and NO TMO. + * ts_last_pkt = time-stamp of the last pkt in the block. + * + * ts_first_pkt: + * Is always the time-stamp when the block was opened. + * Case a) ZERO packets + * No packets to deal with but atleast you know the + * time-interval of this block. + * Case b) Non-zero packets + * Use the ts of the first packet in the block. + * + */ + struct tpacket_bd_ts ts_first_pkt, ts_last_pkt; +}; + +union tpacket_bd_header_u { + struct tpacket_hdr_v1 bh1; +}; + +struct tpacket_block_desc { + __u32 version; + __u32 offset_to_priv; + union tpacket_bd_header_u hdr; +}; + #define TPACKET2_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll)) +#define TPACKET3_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll)) enum tpacket_versions { TPACKET_V1, TPACKET_V2, + TPACKET_V3 }; /* @@ -138,6 +242,21 @@ struct tpacket_req { unsigned int tp_frame_nr; /* Total number of frames */ }; +struct tpacket_req3 { + unsigned int tp_block_size; /* Minimal size of contiguous block */ + unsigned int tp_block_nr; /* Number of blocks */ + unsigned int tp_frame_size; /* Size of frame */ + unsigned int tp_frame_nr; /* Total number of frames */ + unsigned int tp_retire_blk_tov; /* timeout in msecs */ + unsigned int tp_sizeof_priv; /* offset to private data area */ + unsigned int tp_feature_req_word; +}; + +union tpacket_req_u { + struct tpacket_req req; + struct tpacket_req3 req3; +}; + struct packet_mreq { int mr_ifindex; unsigned short mr_type; diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h index 184bc556620..23cefa1111b 100644 --- a/include/linux/if_pppol2tp.h +++ b/include/linux/if_pppol2tp.h @@ -39,7 +39,7 @@ struct pppol2tp_addr { * bits. So we need a different sockaddr structure. */ struct pppol2tpv3_addr { - pid_t pid; /* pid that owns the fd. + __kernel_pid_t pid; /* pid that owns the fd. * 0 => current */ int fd; /* FD of UDP or IP socket to use */ diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h index 397921b09ef..b5f927f59f2 100644 --- a/include/linux/if_pppox.h +++ b/include/linux/if_pppox.h @@ -20,8 +20,9 @@ #include <linux/types.h> #include <asm/byteorder.h> -#ifdef __KERNEL__ +#include <linux/socket.h> #include <linux/if_ether.h> +#ifdef __KERNEL__ #include <linux/if.h> #include <linux/netdevice.h> #include <linux/ppp_channel.h> @@ -63,7 +64,7 @@ struct pptp_addr { #define PX_MAX_PROTO 3 struct sockaddr_pppox { - sa_family_t sa_family; /* address family, AF_PPPOX */ + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ unsigned int sa_protocol; /* protocol identifier */ union { struct pppoe_addr pppoe; @@ -77,7 +78,7 @@ struct sockaddr_pppox { * type instead. */ struct sockaddr_pppol2tp { - sa_family_t sa_family; /* address family, AF_PPPOX */ + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ unsigned int sa_protocol; /* protocol identifier */ struct pppol2tp_addr pppol2tp; } __attribute__((packed)); @@ -86,7 +87,7 @@ struct sockaddr_pppol2tp { * bits. So we need a different sockaddr structure. */ struct sockaddr_pppol2tpv3 { - sa_family_t sa_family; /* address family, AF_PPPOX */ + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ unsigned int sa_protocol; /* protocol identifier */ struct pppol2tpv3_addr pppol2tp; } __attribute__((packed)); diff --git a/include/linux/in.h b/include/linux/in.h index beeb6dee2b4..01129c0ea87 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -182,7 +182,7 @@ struct in_pktinfo { /* Structure describing an Internet (IP) socket address. */ #define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ struct sockaddr_in { - sa_family_t sin_family; /* Address family */ + __kernel_sa_family_t sin_family; /* Address family */ __be16 sin_port; /* Port number */ struct in_addr sin_addr; /* Internet address */ diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index bc8c4902208..80b480c9753 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -97,9 +97,10 @@ enum { INET_DIAG_INFO, INET_DIAG_VEGASINFO, INET_DIAG_CONG, + INET_DIAG_TOS, }; -#define INET_DIAG_MAX INET_DIAG_CONG +#define INET_DIAG_MAX INET_DIAG_TOS /* INET_DIAG_MEM */ diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h index acb9ad684d6..bf22b031790 100644 --- a/include/linux/ip6_tunnel.h +++ b/include/linux/ip6_tunnel.h @@ -16,6 +16,8 @@ #define IP6_TNL_F_MIP6_DEV 0x8 /* copy DSCP from the outer packet */ #define IP6_TNL_F_RCV_DSCP_COPY 0x10 +/* copy fwmark from inner packet */ +#define IP6_TNL_F_USE_ORIG_FWMARK 0x20 struct ip6_tnl_parm { char name[IFNAMSIZ]; /* name of tunnel device */ diff --git a/include/linux/ipx.h b/include/linux/ipx.h index aabb1d29402..3d48014cdd7 100644 --- a/include/linux/ipx.h +++ b/include/linux/ipx.h @@ -7,7 +7,7 @@ #define IPX_MTU 576 struct sockaddr_ipx { - sa_family_t sipx_family; + __kernel_sa_family_t sipx_family; __be16 sipx_port; __be32 sipx_network; unsigned char sipx_node[IPX_NODE_LEN]; diff --git a/include/linux/irda.h b/include/linux/irda.h index 00bdad0e851..a014c325231 100644 --- a/include/linux/irda.h +++ b/include/linux/irda.h @@ -26,12 +26,9 @@ #define KERNEL_IRDA_H #include <linux/types.h> +#include <linux/socket.h> -/* Please do *not* add any #include in this file, this file is - * included as-is in user space. - * Please fix the calling file to properly included needed files before - * this one, or preferably to include <net/irda/irda.h> instead. - * Jean II */ +/* Note that this file is shared with user space. */ /* Hint bit positions for first hint byte */ #define HINT_PNP 0x01 @@ -125,7 +122,7 @@ enum { #define LSAP_ANY 0xff struct sockaddr_irda { - sa_family_t sir_family; /* AF_IRDA */ + __kernel_sa_family_t sir_family; /* AF_IRDA */ __u8 sir_lsap_sel; /* LSAP selector */ __u32 sir_addr; /* Device address */ char sir_name[25]; /* Usually <service>:IrDA:TinyTP */ diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h index 4bdb31df8e7..e77d7f9bb24 100644 --- a/include/linux/l2tp.h +++ b/include/linux/l2tp.h @@ -8,8 +8,8 @@ #define _LINUX_L2TP_H_ #include <linux/types.h> -#ifdef __KERNEL__ #include <linux/socket.h> +#ifdef __KERNEL__ #include <linux/in.h> #else #include <netinet/in.h> @@ -26,14 +26,15 @@ #define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ struct sockaddr_l2tpip { /* The first fields must match struct sockaddr_in */ - sa_family_t l2tp_family; /* AF_INET */ + __kernel_sa_family_t l2tp_family; /* AF_INET */ __be16 l2tp_unused; /* INET port number (unused) */ struct in_addr l2tp_addr; /* Internet address */ __u32 l2tp_conn_id; /* Connection ID of tunnel */ /* Pad to size of `struct sockaddr'. */ - unsigned char __pad[sizeof(struct sockaddr) - sizeof(sa_family_t) - + unsigned char __pad[sizeof(struct sockaddr) - + sizeof(__kernel_sa_family_t) - sizeof(__be16) - sizeof(struct in_addr) - sizeof(__u32)]; }; diff --git a/include/linux/lapb.h b/include/linux/lapb.h index ce709e1885c..873c1eb635e 100644 --- a/include/linux/lapb.h +++ b/include/linux/lapb.h @@ -44,7 +44,8 @@ struct lapb_parms_struct { unsigned int mode; }; -extern int lapb_register(struct net_device *dev, struct lapb_register_struct *callbacks); +extern int lapb_register(struct net_device *dev, + const struct lapb_register_struct *callbacks); extern int lapb_unregister(struct net_device *dev); extern int lapb_getparms(struct net_device *dev, struct lapb_parms_struct *parms); extern int lapb_setparms(struct net_device *dev, struct lapb_parms_struct *parms); diff --git a/include/linux/llc.h b/include/linux/llc.h index ad7074ba81a..a2418ae13ee 100644 --- a/include/linux/llc.h +++ b/include/linux/llc.h @@ -12,16 +12,20 @@ * * See the GNU General Public License for more details. */ + +#include <linux/socket.h> + #define __LLC_SOCK_SIZE__ 16 /* sizeof(sockaddr_llc), word align. */ struct sockaddr_llc { - sa_family_t sllc_family; /* AF_LLC */ - sa_family_t sllc_arphrd; /* ARPHRD_ETHER */ + __kernel_sa_family_t sllc_family; /* AF_LLC */ + __kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */ unsigned char sllc_test; unsigned char sllc_xid; unsigned char sllc_ua; /* UA data, only for SOCK_STREAM. */ unsigned char sllc_sap; unsigned char sllc_mac[IFHWADDRLEN]; - unsigned char __pad[__LLC_SOCK_SIZE__ - sizeof(sa_family_t) * 2 - + unsigned char __pad[__LLC_SOCK_SIZE__ - + sizeof(__kernel_sa_family_t) * 2 - sizeof(unsigned char) * 4 - IFHWADDRLEN]; }; diff --git a/include/linux/mii.h b/include/linux/mii.h index 103113a2fd1..27748230aa6 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -11,131 +11,130 @@ #include <linux/types.h> /* Generic MII registers. */ - -#define MII_BMCR 0x00 /* Basic mode control register */ -#define MII_BMSR 0x01 /* Basic mode status register */ -#define MII_PHYSID1 0x02 /* PHYS ID 1 */ -#define MII_PHYSID2 0x03 /* PHYS ID 2 */ -#define MII_ADVERTISE 0x04 /* Advertisement control reg */ -#define MII_LPA 0x05 /* Link partner ability reg */ -#define MII_EXPANSION 0x06 /* Expansion register */ -#define MII_CTRL1000 0x09 /* 1000BASE-T control */ -#define MII_STAT1000 0x0a /* 1000BASE-T status */ -#define MII_ESTATUS 0x0f /* Extended Status */ -#define MII_DCOUNTER 0x12 /* Disconnect counter */ -#define MII_FCSCOUNTER 0x13 /* False carrier counter */ -#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ -#define MII_RERRCOUNTER 0x15 /* Receive error counter */ -#define MII_SREVISION 0x16 /* Silicon revision */ -#define MII_RESV1 0x17 /* Reserved... */ -#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ -#define MII_PHYADDR 0x19 /* PHY address */ -#define MII_RESV2 0x1a /* Reserved... */ -#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ -#define MII_NCONFIG 0x1c /* Network interface config */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +#define MII_CTRL1000 0x09 /* 1000BASE-T control */ +#define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_ESTATUS 0x0f /* Extended Status */ +#define MII_DCOUNTER 0x12 /* Disconnect counter */ +#define MII_FCSCOUNTER 0x13 /* False carrier counter */ +#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ +#define MII_RERRCOUNTER 0x15 /* Receive error counter */ +#define MII_SREVISION 0x16 /* Silicon revision */ +#define MII_RESV1 0x17 /* Reserved... */ +#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ +#define MII_PHYADDR 0x19 /* PHY address */ +#define MII_RESV2 0x1a /* Reserved... */ +#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ +#define MII_NCONFIG 0x1c /* Network interface config */ /* Basic mode control register. */ -#define BMCR_RESV 0x003f /* Unused... */ -#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ -#define BMCR_CTST 0x0080 /* Collision test */ -#define BMCR_FULLDPLX 0x0100 /* Full duplex */ -#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ -#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */ -#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */ -#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ -#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ -#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ -#define BMCR_RESET 0x8000 /* Reset the DP83840 */ +#define BMCR_RESV 0x003f /* Unused... */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ +#define BMCR_CTST 0x0080 /* Collision test */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ +#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */ +#define BMCR_PDOWN 0x0800 /* Enable low power state */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ +#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ +#define BMCR_RESET 0x8000 /* Reset to default state */ /* Basic mode status register. */ -#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ -#define BMSR_JCD 0x0002 /* Jabber detected */ -#define BMSR_LSTATUS 0x0004 /* Link status */ -#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ -#define BMSR_RFAULT 0x0010 /* Remote fault detected */ -#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ -#define BMSR_RESV 0x00c0 /* Unused... */ -#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ -#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ -#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ -#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ -#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ -#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ -#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ -#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_JCD 0x0002 /* Jabber detected */ +#define BMSR_LSTATUS 0x0004 /* Link status */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_RFAULT 0x0010 /* Remote fault detected */ +#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ +#define BMSR_RESV 0x00c0 /* Unused... */ +#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ +#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ +#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ /* Advertisement control register. */ -#define ADVERTISE_SLCT 0x001f /* Selector bits */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ -#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ -#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ -#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ -#define ADVERTISE_RESV 0x1000 /* Unused... */ -#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ -#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ -#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ - -#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ - ADVERTISE_CSMA) -#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ +#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ +#define ADVERTISE_RESV 0x1000 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ + +#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ + ADVERTISE_CSMA) +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) /* Link partner ability register. */ -#define LPA_SLCT 0x001f /* Same as advertise selector */ -#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ -#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */ -#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ -#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */ -#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ -#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */ -#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ -#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ -#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ -#define LPA_PAUSE_CAP 0x0400 /* Can pause */ -#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ -#define LPA_RESV 0x1000 /* Unused... */ -#define LPA_RFAULT 0x2000 /* Link partner faulted */ -#define LPA_LPACK 0x4000 /* Link partner acked us */ -#define LPA_NPAGE 0x8000 /* Next page bit */ +#define LPA_SLCT 0x001f /* Same as advertise selector */ +#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */ +#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */ +#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */ +#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ +#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ +#define LPA_PAUSE_CAP 0x0400 /* Can pause */ +#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ +#define LPA_RESV 0x1000 /* Unused... */ +#define LPA_RFAULT 0x2000 /* Link partner faulted */ +#define LPA_LPACK 0x4000 /* Link partner acked us */ +#define LPA_NPAGE 0x8000 /* Next page bit */ #define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) #define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) /* Expansion register for auto-negotiation. */ -#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ -#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ -#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ -#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ -#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ -#define EXPANSION_RESV 0xffe0 /* Unused... */ +#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ +#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ +#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ +#define EXPANSION_RESV 0xffe0 /* Unused... */ -#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ -#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ +#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ +#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ /* N-way test register. */ -#define NWAYTEST_RESV1 0x00ff /* Unused... */ -#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ -#define NWAYTEST_RESV2 0xfe00 /* Unused... */ +#define NWAYTEST_RESV1 0x00ff /* Unused... */ +#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ +#define NWAYTEST_RESV2 0xfe00 /* Unused... */ /* 1000BASE-T Control register */ -#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ -#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ +#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ #define CTL1000_AS_MASTER 0x0800 #define CTL1000_ENABLE_MASTER 0x1000 /* 1000BASE-T Status register */ -#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ -#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ -#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ -#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ +#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ +#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ +#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ +#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ /* Flow control flags */ #define FLOW_CTRL_TX 0x01 @@ -149,7 +148,7 @@ struct mii_ioctl_data { __u16 val_out; }; -#ifdef __KERNEL__ +#ifdef __KERNEL__ #include <linux/if.h> @@ -180,7 +179,7 @@ extern unsigned int mii_check_media (struct mii_if_info *mii, unsigned int ok_to_print, unsigned int init_media); extern int generic_mii_ioctl(struct mii_if_info *mii_if, - struct mii_ioctl_data *mii_data, int cmd, + struct mii_ioctl_data *mii_data, int cmd, unsigned int *duplex_changed); @@ -189,7 +188,6 @@ static inline struct mii_ioctl_data *if_mii(struct ifreq *rq) return (struct mii_ioctl_data *) &rq->ifr_ifru; } - /** * mii_nway_result * @negotiated: value of MII ANAR and'd with ANLPAR diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 53ef894bfa0..2366f94a095 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -75,6 +75,7 @@ enum { MLX4_DEV_CAP_FLAG_UD_MCAST = 1LL << 21, MLX4_DEV_CAP_FLAG_IBOE = 1LL << 30, MLX4_DEV_CAP_FLAG_UC_LOOPBACK = 1LL << 32, + MLX4_DEV_CAP_FLAG_FCS_KEEP = 1LL << 34, MLX4_DEV_CAP_FLAG_WOL = 1LL << 38, MLX4_DEV_CAP_FLAG_UDP_RSS = 1LL << 40, MLX4_DEV_CAP_FLAG_VEP_UC_STEER = 1LL << 41, diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 774b8952deb..29971a589ff 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -135,6 +135,17 @@ struct page { #endif ; +struct page_frag { + struct page *page; +#if (BITS_PER_LONG > 32) || (PAGE_SIZE >= 65536) + __u32 offset; + __u32 size; +#else + __u16 offset; + __u16 size; +#endif +}; + typedef unsigned long __nocast vm_flags_t; /* diff --git a/include/linux/net_tstamp.h b/include/linux/net_tstamp.h index a3b8546354a..ae5df122e42 100644 --- a/include/linux/net_tstamp.h +++ b/include/linux/net_tstamp.h @@ -45,7 +45,7 @@ struct hwtstamp_config { }; /* possible values for hwtstamp_config->tx_type */ -enum { +enum hwtstamp_tx_types { /* * No outgoing packet will need hardware time stamping; * should a packet arrive which asks for it, no hardware @@ -60,10 +60,19 @@ enum { * before sending the packet. */ HWTSTAMP_TX_ON, + + /* + * Enables time stamping for outgoing packets just as + * HWTSTAMP_TX_ON does, but also enables time stamp insertion + * directly into Sync packets. In this case, transmitted Sync + * packets will not received a time stamp via the socket error + * queue. + */ + HWTSTAMP_TX_ONESTEP_SYNC, }; /* possible values for hwtstamp_config->rx_filter */ -enum { +enum hwtstamp_rx_filters { /* time stamp no incoming packet at all */ HWTSTAMP_FILTER_NONE, diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 279726039f0..c8615cd0b2f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -723,9 +723,8 @@ struct netdev_tc_txq { * * void (*ndo_set_rx_mode)(struct net_device *dev); * This function is called device changes address list filtering. - * - * void (*ndo_set_multicast_list)(struct net_device *dev); - * This function is called when the multicast address list changes. + * If driver handles unicast address filtering, it should set + * IFF_UNICAST_FLT to its priv_flags. * * int (*ndo_set_mac_address)(struct net_device *dev, void *addr); * This function is called when the Media Access Control address @@ -782,6 +781,7 @@ struct netdev_tc_txq { * int (*ndo_set_vf_mac)(struct net_device *dev, int vf, u8* mac); * int (*ndo_set_vf_vlan)(struct net_device *dev, int vf, u16 vlan, u8 qos); * int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate); + * int (*ndo_set_vf_spoofchk)(struct net_device *dev, int vf, bool setting); * int (*ndo_get_vf_config)(struct net_device *dev, * int vf, struct ifla_vf_info *ivf); * int (*ndo_set_vf_port)(struct net_device *dev, int vf, @@ -868,7 +868,6 @@ struct net_device_ops { void (*ndo_change_rx_flags)(struct net_device *dev, int flags); void (*ndo_set_rx_mode)(struct net_device *dev); - void (*ndo_set_multicast_list)(struct net_device *dev); int (*ndo_set_mac_address)(struct net_device *dev, void *addr); int (*ndo_validate_addr)(struct net_device *dev); @@ -902,6 +901,8 @@ struct net_device_ops { int queue, u16 vlan, u8 qos); int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate); + int (*ndo_set_vf_spoofchk)(struct net_device *dev, + int vf, bool setting); int (*ndo_get_vf_config)(struct net_device *dev, int vf, struct ifla_vf_info *ivf); @@ -924,11 +925,15 @@ struct net_device_ops { u16 xid, struct scatterlist *sgl, unsigned int sgc); +#endif + +#if defined(CONFIG_LIBFCOE) || defined(CONFIG_LIBFCOE_MODULE) #define NETDEV_FCOE_WWNN 0 #define NETDEV_FCOE_WWPN 1 int (*ndo_fcoe_get_wwn)(struct net_device *dev, u64 *wwn, int type); #endif + #ifdef CONFIG_RFS_ACCEL int (*ndo_rx_flow_steer)(struct net_device *dev, const struct sk_buff *skb, @@ -2587,9 +2592,6 @@ static inline int netif_is_bond_slave(struct net_device *dev) extern struct pernet_operations __net_initdata loopback_net_ops; -int dev_ethtool_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd); - static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev) { if (dev->features & NETIF_F_RXCSUM) diff --git a/include/linux/netfilter/xt_connlimit.h b/include/linux/netfilter/xt_connlimit.h index 0ca66e97acb..d1366f05d1b 100644 --- a/include/linux/netfilter/xt_connlimit.h +++ b/include/linux/netfilter/xt_connlimit.h @@ -2,6 +2,7 @@ #define _XT_CONNLIMIT_H #include <linux/types.h> +#include <linux/netfilter.h> struct xt_connlimit_data; diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h index 74b904d8f99..e3c041d5402 100644 --- a/include/linux/netfilter/xt_conntrack.h +++ b/include/linux/netfilter/xt_conntrack.h @@ -6,6 +6,7 @@ #define _XT_CONNTRACK_H #include <linux/types.h> +#include <linux/netfilter.h> #include <linux/netfilter/nf_conntrack_tuple_common.h> #define XT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1)) diff --git a/include/linux/netfilter/xt_iprange.h b/include/linux/netfilter/xt_iprange.h index c1f21a779a4..25fd7cf851f 100644 --- a/include/linux/netfilter/xt_iprange.h +++ b/include/linux/netfilter/xt_iprange.h @@ -2,6 +2,7 @@ #define _LINUX_NETFILTER_XT_IPRANGE_H 1 #include <linux/types.h> +#include <linux/netfilter.h> enum { IPRANGE_SRC = 1 << 0, /* match source IP address */ diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h index adbf4bff87e..e08565d4517 100644 --- a/include/linux/netfilter_arp/arp_tables.h +++ b/include/linux/netfilter_arp/arp_tables.h @@ -52,7 +52,7 @@ struct arpt_arp { struct in_addr smsk, tmsk; /* Device hw address length, src+target device addresses */ - u_int8_t arhln, arhln_mask; + __u8 arhln, arhln_mask; struct arpt_devaddr_info src_devaddr; struct arpt_devaddr_info tgt_devaddr; @@ -71,9 +71,9 @@ struct arpt_arp { unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ]; /* Flags word */ - u_int8_t flags; + __u8 flags; /* Inverse flags */ - u_int16_t invflags; + __u16 invflags; }; /* Values for "flag" field in struct arpt_ip (general arp structure). @@ -102,9 +102,9 @@ struct arpt_entry struct arpt_arp arp; /* Size of arpt_entry + matches */ - u_int16_t target_offset; + __u16 target_offset; /* Size of arpt_entry + matches + target */ - u_int16_t next_offset; + __u16 next_offset; /* Back pointer */ unsigned int comefrom; @@ -260,8 +260,8 @@ extern unsigned int arpt_do_table(struct sk_buff *skb, struct compat_arpt_entry { struct arpt_arp arp; - u_int16_t target_offset; - u_int16_t next_offset; + __u16 target_offset; + __u16 next_offset; compat_uint_t comefrom; struct compat_xt_counters counters; unsigned char elems[0]; diff --git a/include/linux/netfilter_decnet.h b/include/linux/netfilter_decnet.h index 6f425369ee2..0b09732aacd 100644 --- a/include/linux/netfilter_decnet.h +++ b/include/linux/netfilter_decnet.h @@ -11,6 +11,9 @@ /* only for userspace compatibility */ #ifndef __KERNEL__ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + /* IP Cache bits. */ /* Src IP address. */ #define NFC_DN_SRC 0x0001 diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index 29c7727ff0e..fa0946c549d 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -9,6 +9,9 @@ /* only for userspace compatibility */ #ifndef __KERNEL__ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + /* IP Cache bits. */ /* Src IP address. */ #define NFC_IP_SRC 0x0001 diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h index 64a5d95c58e..db79231914c 100644 --- a/include/linux/netfilter_ipv4/ip_tables.h +++ b/include/linux/netfilter_ipv4/ip_tables.h @@ -81,12 +81,12 @@ struct ipt_ip { unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ]; /* Protocol, 0 = ANY */ - u_int16_t proto; + __u16 proto; /* Flags word */ - u_int8_t flags; + __u8 flags; /* Inverse flags */ - u_int8_t invflags; + __u8 invflags; }; /* Values for "flag" field in struct ipt_ip (general ip structure). */ @@ -114,9 +114,9 @@ struct ipt_entry { unsigned int nfcache; /* Size of ipt_entry + matches */ - u_int16_t target_offset; + __u16 target_offset; /* Size of ipt_entry + matches + target */ - u_int16_t next_offset; + __u16 next_offset; /* Back pointer */ unsigned int comefrom; @@ -149,9 +149,9 @@ struct ipt_entry { /* ICMP matching stuff */ struct ipt_icmp { - u_int8_t type; /* type to match */ - u_int8_t code[2]; /* range of code */ - u_int8_t invflags; /* Inverse flags */ + __u8 type; /* type to match */ + __u8 code[2]; /* range of code */ + __u8 invflags; /* Inverse flags */ }; /* Values for "inv" field for struct ipt_icmp. */ @@ -288,8 +288,8 @@ extern unsigned int ipt_do_table(struct sk_buff *skb, struct compat_ipt_entry { struct ipt_ip ip; compat_uint_t nfcache; - u_int16_t target_offset; - u_int16_t next_offset; + __u16 target_offset; + __u16 next_offset; compat_uint_t comefrom; struct compat_xt_counters counters; unsigned char elems[0]; diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 1f7e300094c..57c025127f1 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -12,6 +12,9 @@ /* only for userspace compatibility */ #ifndef __KERNEL__ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + /* IP Cache bits. */ /* Src IP address. */ #define NFC_IP6_SRC 0x0001 diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index c9784f7a9c1..f549adccc94 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -81,14 +81,14 @@ struct ip6t_ip6 { * MH do not match any packets. * - You also need to set IP6T_FLAGS_PROTO to "flags" to check protocol. */ - u_int16_t proto; + __u16 proto; /* TOS to match iff flags & IP6T_F_TOS */ - u_int8_t tos; + __u8 tos; /* Flags word */ - u_int8_t flags; + __u8 flags; /* Inverse flags */ - u_int8_t invflags; + __u8 invflags; }; /* Values for "flag" field in struct ip6t_ip6 (general ip6 structure). */ @@ -118,9 +118,9 @@ struct ip6t_entry { unsigned int nfcache; /* Size of ipt_entry + matches */ - u_int16_t target_offset; + __u16 target_offset; /* Size of ipt_entry + matches + target */ - u_int16_t next_offset; + __u16 next_offset; /* Back pointer */ unsigned int comefrom; @@ -186,9 +186,9 @@ struct ip6t_error { /* ICMP matching stuff */ struct ip6t_icmp { - u_int8_t type; /* type to match */ - u_int8_t code[2]; /* range of code */ - u_int8_t invflags; /* Inverse flags */ + __u8 type; /* type to match */ + __u8 code[2]; /* range of code */ + __u8 invflags; /* Inverse flags */ }; /* Values for "inv" field for struct ipt_icmp. */ @@ -298,8 +298,8 @@ extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset, struct compat_ip6t_entry { struct ip6t_ip6 ipv6; compat_uint_t nfcache; - u_int16_t target_offset; - u_int16_t next_offset; + __u16 target_offset; + __u16 next_offset; compat_uint_t comefrom; struct compat_xt_counters counters; unsigned char elems[0]; diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 180540a84d3..8180cd9d73d 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -1,7 +1,7 @@ #ifndef __LINUX_NETLINK_H #define __LINUX_NETLINK_H -#include <linux/socket.h> /* for sa_family_t */ +#include <linux/socket.h> /* for __kernel_sa_family_t */ #include <linux/types.h> #define NETLINK_ROUTE 0 /* Routing/device hook */ diff --git a/include/linux/netrom.h b/include/linux/netrom.h index 6939b32f66a..af7313cc9cb 100644 --- a/include/linux/netrom.h +++ b/include/linux/netrom.h @@ -7,6 +7,8 @@ #ifndef NETROM_KERNEL_H #define NETROM_KERNEL_H +#include <linux/ax25.h> + #define NETROM_MTU 236 #define NETROM_T1 1 diff --git a/include/linux/nfc.h b/include/linux/nfc.h index 330a4c5db58..36cb955b05c 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -39,6 +39,10 @@ * * @NFC_CMD_GET_DEVICE: request information about a device (requires * %NFC_ATTR_DEVICE_INDEX) or dump request to get a list of all nfc devices + * @NFC_CMD_DEV_UP: turn on the nfc device + * (requires %NFC_ATTR_DEVICE_INDEX) + * @NFC_CMD_DEV_DOWN: turn off the nfc device + * (requires %NFC_ATTR_DEVICE_INDEX) * @NFC_CMD_START_POLL: start polling for targets using the given protocols * (requires %NFC_ATTR_DEVICE_INDEX and %NFC_ATTR_PROTOCOLS) * @NFC_CMD_STOP_POLL: stop polling for targets (requires @@ -56,6 +60,8 @@ enum nfc_commands { NFC_CMD_UNSPEC, NFC_CMD_GET_DEVICE, + NFC_CMD_DEV_UP, + NFC_CMD_DEV_DOWN, NFC_CMD_START_POLL, NFC_CMD_STOP_POLL, NFC_CMD_GET_TARGET, @@ -123,4 +129,6 @@ struct sockaddr_nfc { #define NFC_SOCKPROTO_RAW 0 #define NFC_SOCKPROTO_MAX 1 +#define NFC_HEADER_SIZE 1 + #endif /*__LINUX_NFC_H */ diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 8ad70dcac3f..8049bf77d79 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -161,6 +161,13 @@ * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. + * Following attributes are provided for drivers that generate full Beacon + * and Probe Response frames internally: %NL80211_ATTR_SSID, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, + * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, + * %NL80211_ATTR_IE_ASSOC_RESP. * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, * parameters are like for %NL80211_CMD_SET_BEACON. * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it @@ -231,6 +238,8 @@ * * @NL80211_CMD_GET_SCAN: get scan results * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * probe requests at CCK rate or not. * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to * NL80211_CMD_GET_SCAN and on the "scan" multicast group) * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, @@ -425,6 +434,8 @@ * specified using %NL80211_ATTR_DURATION. When called, this operation * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the * TX status event pertaining to the TX request. + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * management frames at CCK rate or not in 2GHz band. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. @@ -492,6 +503,12 @@ * this command may also be sent by the driver as an MLME event to * inform userspace of the new replay counter. * + * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace + * of PMKSA caching dandidates. + * + * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -616,6 +633,11 @@ enum nl80211_commands { NL80211_CMD_SET_REKEY_OFFLOAD, + NL80211_CMD_PMKSA_CANDIDATE, + + NL80211_CMD_TDLS_OPER, + NL80211_CMD_TDLS_MGMT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -762,6 +784,8 @@ enum nl80211_commands { * that can be added to a scan request * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information * elements that can be added to a scheduled scan request + * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be + * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. * * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive @@ -842,18 +866,20 @@ enum nl80211_commands { * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT * event (u16) * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating - * that protected APs should be used. + * that protected APs should be used. This is also used with NEW_BEACON to + * indicate that the BSS is to use protection. * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to - * indicate which unicast key ciphers will be used with the connection + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON + * to indicate which unicast key ciphers will be used with the connection * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate - * which group key cipher will be used with the connection (a u32). - * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate - * which WPA version(s) the AP we want to associate with is using + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which group key cipher will be used with the connection (a + * u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which WPA version(s) the AP we want to associate with is using * (a u32 with flags from &enum nl80211_wpa_versions). - * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate - * which key management algorithm(s) to use (an array of u32). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which key management algorithm(s) to use (an array of u32). * * @NL80211_ATTR_REQ_IE: (Re)association request information elements as * sent out by the card, for ROAM and successful CONNECT events. @@ -1002,6 +1028,24 @@ enum nl80211_commands { * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan * cycles, in msecs. + + * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more + * sets of attributes to match during scheduled scans. Only BSSs + * that match any of the sets will be reported. These are + * pass-thru filter rules. + * For a match to succeed, the BSS must match all attributes of a + * set. Since not every hardware supports matching all types of + * attributes, there is no guarantee that the reported BSSs are + * fully complying with the match sets and userspace needs to be + * able to ignore them by itself. + * Thus, the implementation is somewhat hardware-dependent, but + * this is only an optimization and the userspace application + * needs to handle all the non-filtered results anyway. + * If the match attributes don't make sense when combined with + * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID + * is included in the probe request, but the match attributes + * will never let it go through), -EINVAL may be returned. + * If ommited, no filtering is done. * * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported * interface combinations. In each nested item, it contains attributes @@ -1019,6 +1063,52 @@ enum nl80211_commands { * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but * without the length restriction (at most %NL80211_MAX_SUPP_RATES). * + * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon + * and Probe Response (when response to wildcard Probe Request); see + * &enum nl80211_hidden_ssid, represented as a u32 + * + * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. + * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to + * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the + * driver (or firmware) replies to Probe Request frames. + * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association + * Response frames. This is used with %NL80211_CMD_NEW_BEACON and + * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into + * (Re)Association Response frames when the driver (or firmware) replies to + * (Re)Association Request frames. + * + * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration + * of the station, see &enum nl80211_sta_wme_attr. + * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working + * as AP. + * + * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of + * roaming to another AP in the same ESS if the signal lever is low. + * + * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching + * candidate information, see &enum nl80211_pmksa_candidate_attr. + * + * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not + * for management frames transmission. In order to avoid p2p probe/action + * frames are being transmitted at CCK rate in 2GHz band, the user space + * applications use this attribute. + * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and + * %NL80211_CMD_FRAME commands. + * + * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup + * request, link setup confirm, link teardown, etc.). Values are + * described in the TDLS (802.11z) specification. + * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a + * TDLS conversation between two devices. + * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see + * &enum nl80211_tdls_operation, represented as a u8. + * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate + * as a TDLS peer sta. + * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown + * procedures should be performed by sending TDLS packets via + * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be + * used for asking the driver to perform a TDLS operation. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1224,6 +1314,29 @@ enum nl80211_attrs { NL80211_ATTR_SCAN_SUPP_RATES, + NL80211_ATTR_HIDDEN_SSID, + + NL80211_ATTR_IE_PROBE_RESP, + NL80211_ATTR_IE_ASSOC_RESP, + + NL80211_ATTR_STA_WME, + NL80211_ATTR_SUPPORT_AP_UAPSD, + + NL80211_ATTR_ROAM_SUPPORT, + + NL80211_ATTR_SCHED_SCAN_MATCH, + NL80211_ATTR_MAX_MATCH_SETS, + + NL80211_ATTR_PMKSA_CANDIDATE, + + NL80211_ATTR_TX_NO_CCK_RATE, + + NL80211_ATTR_TDLS_ACTION, + NL80211_ATTR_TDLS_DIALOG_TOKEN, + NL80211_ATTR_TDLS_OPERATION, + NL80211_ATTR_TDLS_SUPPORT, + NL80211_ATTR_TDLS_EXTERNAL_SETUP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1321,6 +1434,7 @@ enum nl80211_iftype { * @NL80211_STA_FLAG_WME: station is WME/QoS capable * @NL80211_STA_FLAG_MFP: station uses management frame protection * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated + * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1331,6 +1445,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_WME, NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, + NL80211_STA_FLAG_TDLS_PEER, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -1433,6 +1548,7 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute * containing info as possible, see &enum nl80211_sta_bss_param * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected + * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1454,6 +1570,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_RX_BITRATE, NL80211_STA_INFO_BSS_PARAM, NL80211_STA_INFO_CONNECTED_TIME, + NL80211_STA_INFO_STA_FLAGS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1683,6 +1800,26 @@ enum nl80211_reg_rule_attr { }; /** + * enum nl80211_sched_scan_match_attr - scheduled scan match attributes + * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, + * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter + * attribute number currently defined + * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_match_attr { + __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, + + NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + + /* keep last */ + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, + NL80211_SCHED_SCAN_MATCH_ATTR_MAX = + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 +}; + +/** * enum nl80211_reg_rule_flags - regulatory rule flags * * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed @@ -1833,6 +1970,13 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a * source mesh point for path selection elements. * + * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between + * root announcements are transmitted. + * + * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -1854,6 +1998,8 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, NL80211_MESHCONF_HWMP_ROOTMODE, NL80211_MESHCONF_ELEMENT_TTL, + NL80211_MESHCONF_HWMP_RANN_INTERVAL, + NL80211_MESHCONF_GATE_ANNOUNCEMENTS, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2430,4 +2576,78 @@ enum nl80211_rekey_data { MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 }; +/** + * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID + * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in + * Beacon frames) + * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element + * in Beacon frames + * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID + * element in Beacon frames but zero out each byte in the SSID + */ +enum nl80211_hidden_ssid { + NL80211_HIDDEN_SSID_NOT_IN_USE, + NL80211_HIDDEN_SSID_ZERO_LEN, + NL80211_HIDDEN_SSID_ZERO_CONTENTS +}; + +/** + * enum nl80211_sta_wme_attr - station WME attributes + * @__NL80211_STA_WME_INVALID: invalid number for nested attribute + * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format + * is the same as the AC bitmap in the QoS info field. + * @NL80211_STA_WME_MAX_SP: max service period. the format is the same + * as the MAX_SP field in the QoS info field (but already shifted down). + * @__NL80211_STA_WME_AFTER_LAST: internal + * @NL80211_STA_WME_MAX: highest station WME attribute + */ +enum nl80211_sta_wme_attr { + __NL80211_STA_WME_INVALID, + NL80211_STA_WME_UAPSD_QUEUES, + NL80211_STA_WME_MAX_SP, + + /* keep last */ + __NL80211_STA_WME_AFTER_LAST, + NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 +}; + +/** + * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates + * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes + * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher + * priority) + * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) + * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) + * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes + * (internal) + * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute + * (internal) + */ +enum nl80211_pmksa_candidate_attr { + __NL80211_PMKSA_CANDIDATE_INVALID, + NL80211_PMKSA_CANDIDATE_INDEX, + NL80211_PMKSA_CANDIDATE_BSSID, + NL80211_PMKSA_CANDIDATE_PREAUTH, + + /* keep last */ + NUM_NL80211_PMKSA_CANDIDATE, + MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 +}; + +/** + * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION + * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request + * @NL80211_TDLS_SETUP: Setup TDLS link + * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established + * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link + * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link + */ +enum nl80211_tdls_operation { + NL80211_TDLS_DISCOVERY_REQ, + NL80211_TDLS_SETUP, + NL80211_TDLS_TEARDOWN, + NL80211_TDLS_ENABLE_LINK, + NL80211_TDLS_DISABLE_LINK, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 9fc01226055..f1b1ca1a09e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -174,6 +174,8 @@ enum pci_dev_flags { PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1, /* Device configuration is irrevocably lost if disabled into D3 */ PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2, + /* Provide indication device is assigned by a Virtual Machine Manager */ + PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4, }; enum pci_irq_reroute_variant { diff --git a/include/linux/phonet.h b/include/linux/phonet.h index 6fb13841db4..f53a4167c5f 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -24,6 +24,7 @@ #define LINUX_PHONET_H #include <linux/types.h> +#include <linux/socket.h> /* Automatic protocol selection */ #define PN_PROTO_TRANSPORT 0 @@ -96,11 +97,11 @@ struct phonetmsg { /* Phonet socket address structure */ struct sockaddr_pn { - sa_family_t spn_family; + __kernel_sa_family_t spn_family; __u8 spn_obj; __u8 spn_dev; __u8 spn_resource; - __u8 spn_zero[sizeof(struct sockaddr) - sizeof(sa_family_t) - 3]; + __u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3]; } __attribute__((packed)); /* Well known address */ diff --git a/include/linux/phy.h b/include/linux/phy.h index 54fc4138955..79f337c4738 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -420,7 +420,7 @@ struct phy_driver { /* * Requests a Tx timestamp for 'skb'. The phy driver promises - * to deliver it to the socket's error queue as soon as a + * to deliver it using skb_complete_tx_timestamp() as soon as a * timestamp becomes available. One of the PTP_CLASS_ values * is passed in 'type'. */ diff --git a/include/linux/rfkill-gpio.h b/include/linux/rfkill-gpio.h index a175d059803..4d09f6eab35 100644 --- a/include/linux/rfkill-gpio.h +++ b/include/linux/rfkill-gpio.h @@ -30,6 +30,8 @@ * @reset_gpio: GPIO which is used for reseting rfkill switch * @shutdown_gpio: GPIO which is used for shutdown of rfkill switch * @power_clk_name: [optional] name of clk to turn off while blocked + * @gpio_runtime_close: clean up platform specific gpio configuration + * @gpio_runtime_setup: set up platform specific gpio configuration */ struct rfkill_gpio_platform_data { @@ -38,6 +40,8 @@ struct rfkill_gpio_platform_data { int shutdown_gpio; const char *power_clk_name; enum rfkill_type type; + void (*gpio_runtime_close)(struct platform_device *); + int (*gpio_runtime_setup)(struct platform_device *); }; #endif /* __RFKILL_GPIO_H */ diff --git a/include/linux/rose.h b/include/linux/rose.h index c7b4b184c82..1fcfe95893b 100644 --- a/include/linux/rose.h +++ b/include/linux/rose.h @@ -7,6 +7,9 @@ #ifndef ROSE_KERNEL_H #define ROSE_KERNEL_H +#include <linux/socket.h> +#include <linux/ax25.h> + #define ROSE_MTU 251 #define ROSE_MAX_DIGIS 6 @@ -44,7 +47,7 @@ typedef struct { } rose_address; struct sockaddr_rose { - sa_family_t srose_family; + __kernel_sa_family_t srose_family; rose_address srose_addr; ax25_address srose_call; int srose_ndigis; @@ -52,7 +55,7 @@ struct sockaddr_rose { }; struct full_sockaddr_rose { - sa_family_t srose_family; + __kernel_sa_family_t srose_family; rose_address srose_addr; ax25_address srose_call; unsigned int srose_ndigis; diff --git a/include/linux/sh_eth.h b/include/linux/sh_eth.h new file mode 100644 index 00000000000..2076acf8294 --- /dev/null +++ b/include/linux/sh_eth.h @@ -0,0 +1,25 @@ +#ifndef __ASM_SH_ETH_H__ +#define __ASM_SH_ETH_H__ + +#include <linux/phy.h> + +enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN}; +enum { + SH_ETH_REG_GIGABIT, + SH_ETH_REG_FAST_SH4, + SH_ETH_REG_FAST_SH3_SH2 +}; + +struct sh_eth_plat_data { + int phy; + int edmac_endian; + int register_type; + phy_interface_t phy_interface; + void (*set_mdio_gate)(void *addr); + + unsigned char mac_addr[6]; + unsigned no_ether_link:1; + unsigned ether_link_active_low:1; +}; + +#endif diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 8bd383caa36..6a6b352326d 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -29,6 +29,7 @@ #include <linux/rcupdate.h> #include <linux/dmaengine.h> #include <linux/hrtimer.h> +#include <linux/dma-mapping.h> /* Don't change this without changing skb_csum_unnecessary! */ #define CHECKSUM_NONE 0 @@ -45,6 +46,11 @@ #define SKB_MAX_HEAD(X) (SKB_MAX_ORDER((X), 0)) #define SKB_MAX_ALLOC (SKB_MAX_ORDER(0, 2)) +/* return minimum truesize of one skb containing X bytes of data */ +#define SKB_TRUESIZE(X) ((X) + \ + SKB_DATA_ALIGN(sizeof(struct sk_buff)) + \ + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) + /* A. Checksumming of received packets by device. * * NONE: device failed to checksum this packet. @@ -134,7 +140,9 @@ struct sk_buff; typedef struct skb_frag_struct skb_frag_t; struct skb_frag_struct { - struct page *page; + struct { + struct page *p; + } page; #if (BITS_PER_LONG > 32) || (PAGE_SIZE >= 65536) __u32 page_offset; __u32 size; @@ -144,6 +152,26 @@ struct skb_frag_struct { #endif }; +static inline unsigned int skb_frag_size(const skb_frag_t *frag) +{ + return frag->size; +} + +static inline void skb_frag_size_set(skb_frag_t *frag, unsigned int size) +{ + frag->size = size; +} + +static inline void skb_frag_size_add(skb_frag_t *frag, int delta) +{ + frag->size += delta; +} + +static inline void skb_frag_size_sub(skb_frag_t *frag, int delta) +{ + frag->size -= delta; +} + #define HAVE_HW_TIME_STAMP /** @@ -322,6 +350,8 @@ typedef unsigned char *sk_buff_data_t; * @queue_mapping: Queue mapping for multiqueue devices * @ndisc_nodetype: router type (from link layer) * @ooo_okay: allow the mapping of a socket to a queue to be changed + * @l4_rxhash: indicate rxhash is a canonical 4-tuple hash over transport + * ports. * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -414,6 +444,7 @@ struct sk_buff { __u8 ndisc_nodetype:2; #endif __u8 ooo_okay:1; + __u8 l4_rxhash:1; kmemcheck_bitfield_end(flags2); /* 0/13 bit hole */ @@ -521,6 +552,7 @@ static inline struct sk_buff *alloc_skb_fclone(unsigned int size, return __alloc_skb(size, priority, 1, NUMA_NO_NODE); } +extern void skb_recycle(struct sk_buff *skb); extern bool skb_recycle_check(struct sk_buff *skb, int skb_size); extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src); @@ -573,11 +605,11 @@ extern unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, unsigned int to, struct ts_config *config, struct ts_state *state); -extern __u32 __skb_get_rxhash(struct sk_buff *skb); +extern void __skb_get_rxhash(struct sk_buff *skb); static inline __u32 skb_get_rxhash(struct sk_buff *skb) { if (!skb->rxhash) - skb->rxhash = __skb_get_rxhash(skb); + __skb_get_rxhash(skb); return skb->rxhash; } @@ -823,9 +855,9 @@ static inline struct sk_buff *skb_unshare(struct sk_buff *skb, * The reference count is not incremented and the reference is therefore * volatile. Use with caution. */ -static inline struct sk_buff *skb_peek(struct sk_buff_head *list_) +static inline struct sk_buff *skb_peek(const struct sk_buff_head *list_) { - struct sk_buff *list = ((struct sk_buff *)list_)->next; + struct sk_buff *list = ((const struct sk_buff *)list_)->next; if (list == (struct sk_buff *)list_) list = NULL; return list; @@ -844,9 +876,9 @@ static inline struct sk_buff *skb_peek(struct sk_buff_head *list_) * The reference count is not incremented and the reference is therefore * volatile. Use with caution. */ -static inline struct sk_buff *skb_peek_tail(struct sk_buff_head *list_) +static inline struct sk_buff *skb_peek_tail(const struct sk_buff_head *list_) { - struct sk_buff *list = ((struct sk_buff *)list_)->prev; + struct sk_buff *list = ((const struct sk_buff *)list_)->prev; if (list == (struct sk_buff *)list_) list = NULL; return list; @@ -1123,18 +1155,51 @@ static inline int skb_pagelen(const struct sk_buff *skb) int i, len = 0; for (i = (int)skb_shinfo(skb)->nr_frags - 1; i >= 0; i--) - len += skb_shinfo(skb)->frags[i].size; + len += skb_frag_size(&skb_shinfo(skb)->frags[i]); return len + skb_headlen(skb); } -static inline void skb_fill_page_desc(struct sk_buff *skb, int i, - struct page *page, int off, int size) +/** + * __skb_fill_page_desc - initialise a paged fragment in an skb + * @skb: buffer containing fragment to be initialised + * @i: paged fragment index to initialise + * @page: the page to use for this fragment + * @off: the offset to the data with @page + * @size: the length of the data + * + * Initialises the @i'th fragment of @skb to point to &size bytes at + * offset @off within @page. + * + * Does not take any additional reference on the fragment. + */ +static inline void __skb_fill_page_desc(struct sk_buff *skb, int i, + struct page *page, int off, int size) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - frag->page = page; + frag->page.p = page; frag->page_offset = off; - frag->size = size; + skb_frag_size_set(frag, size); +} + +/** + * skb_fill_page_desc - initialise a paged fragment in an skb + * @skb: buffer containing fragment to be initialised + * @i: paged fragment index to initialise + * @page: the page to use for this fragment + * @off: the offset to the data with @page + * @size: the length of the data + * + * As per __skb_fill_page_desc() -- initialises the @i'th fragment of + * @skb to point to &size bytes at offset @off within @page. In + * addition updates @skb such that @i is the last fragment. + * + * Does not take any additional reference on the fragment. + */ +static inline void skb_fill_page_desc(struct sk_buff *skb, int i, + struct page *page, int off, int size) +{ + __skb_fill_page_desc(skb, i, page, off, size); skb_shinfo(skb)->nr_frags = i + 1; } @@ -1629,6 +1694,137 @@ static inline void netdev_free_page(struct net_device *dev, struct page *page) } /** + * skb_frag_page - retrieve the page refered to by a paged fragment + * @frag: the paged fragment + * + * Returns the &struct page associated with @frag. + */ +static inline struct page *skb_frag_page(const skb_frag_t *frag) +{ + return frag->page.p; +} + +/** + * __skb_frag_ref - take an addition reference on a paged fragment. + * @frag: the paged fragment + * + * Takes an additional reference on the paged fragment @frag. + */ +static inline void __skb_frag_ref(skb_frag_t *frag) +{ + get_page(skb_frag_page(frag)); +} + +/** + * skb_frag_ref - take an addition reference on a paged fragment of an skb. + * @skb: the buffer + * @f: the fragment offset. + * + * Takes an additional reference on the @f'th paged fragment of @skb. + */ +static inline void skb_frag_ref(struct sk_buff *skb, int f) +{ + __skb_frag_ref(&skb_shinfo(skb)->frags[f]); +} + +/** + * __skb_frag_unref - release a reference on a paged fragment. + * @frag: the paged fragment + * + * Releases a reference on the paged fragment @frag. + */ +static inline void __skb_frag_unref(skb_frag_t *frag) +{ + put_page(skb_frag_page(frag)); +} + +/** + * skb_frag_unref - release a reference on a paged fragment of an skb. + * @skb: the buffer + * @f: the fragment offset + * + * Releases a reference on the @f'th paged fragment of @skb. + */ +static inline void skb_frag_unref(struct sk_buff *skb, int f) +{ + __skb_frag_unref(&skb_shinfo(skb)->frags[f]); +} + +/** + * skb_frag_address - gets the address of the data contained in a paged fragment + * @frag: the paged fragment buffer + * + * Returns the address of the data within @frag. The page must already + * be mapped. + */ +static inline void *skb_frag_address(const skb_frag_t *frag) +{ + return page_address(skb_frag_page(frag)) + frag->page_offset; +} + +/** + * skb_frag_address_safe - gets the address of the data contained in a paged fragment + * @frag: the paged fragment buffer + * + * Returns the address of the data within @frag. Checks that the page + * is mapped and returns %NULL otherwise. + */ +static inline void *skb_frag_address_safe(const skb_frag_t *frag) +{ + void *ptr = page_address(skb_frag_page(frag)); + if (unlikely(!ptr)) + return NULL; + + return ptr + frag->page_offset; +} + +/** + * __skb_frag_set_page - sets the page contained in a paged fragment + * @frag: the paged fragment + * @page: the page to set + * + * Sets the fragment @frag to contain @page. + */ +static inline void __skb_frag_set_page(skb_frag_t *frag, struct page *page) +{ + frag->page.p = page; +} + +/** + * skb_frag_set_page - sets the page contained in a paged fragment of an skb + * @skb: the buffer + * @f: the fragment offset + * @page: the page to set + * + * Sets the @f'th fragment of @skb to contain @page. + */ +static inline void skb_frag_set_page(struct sk_buff *skb, int f, + struct page *page) +{ + __skb_frag_set_page(&skb_shinfo(skb)->frags[f], page); +} + +/** + * skb_frag_dma_map - maps a paged fragment via the DMA API + * @device: the device to map the fragment to + * @frag: the paged fragment to map + * @offset: the offset within the fragment (starting at the + * fragment's own offset) + * @size: the number of bytes to map + * @direction: the direction of the mapping (%PCI_DMA_*) + * + * Maps the page associated with @frag to @device. + */ +static inline dma_addr_t skb_frag_dma_map(struct device *dev, + const skb_frag_t *frag, + size_t offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_page(dev, skb_frag_page(frag), + frag->page_offset + offset, size, dir); +} + +/** * skb_clone_writable - is the header of a clone writable * @skb: buffer to check * @len: length up to which to write @@ -1636,7 +1832,7 @@ static inline void netdev_free_page(struct net_device *dev, struct page *page) * Returns true if modifying the header part of the cloned buffer * does not requires the data to be copied. */ -static inline int skb_clone_writable(struct sk_buff *skb, unsigned int len) +static inline int skb_clone_writable(const struct sk_buff *skb, unsigned int len) { return !skb_header_cloned(skb) && skb_headroom(skb) + len <= skb->hdr_len; @@ -1730,13 +1926,13 @@ static inline int skb_add_data(struct sk_buff *skb, } static inline int skb_can_coalesce(struct sk_buff *skb, int i, - struct page *page, int off) + const struct page *page, int off) { if (i) { - struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1]; + const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1]; - return page == frag->page && - off == frag->page_offset + frag->size; + return page == skb_frag_page(frag) && + off == frag->page_offset + skb_frag_size(frag); } return 0; } @@ -2020,8 +2216,13 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb) /** * skb_complete_tx_timestamp() - deliver cloned skb with tx timestamps * + * PHY drivers may accept clones of transmitted packets for + * timestamping via their phy_driver.txtstamp method. These drivers + * must call this function to return the skb back to the stack, with + * or without a timestamp. + * * @skb: clone of the the original outgoing packet - * @hwtstamps: hardware time stamps + * @hwtstamps: hardware time stamps, may be NULL if not available * */ void skb_complete_tx_timestamp(struct sk_buff *skb, @@ -2257,7 +2458,8 @@ static inline bool skb_warn_if_lro(const struct sk_buff *skb) { /* LRO sets gso_size but not gso_type, whereas if GSO is really * wanted then gso_type will be set. */ - struct skb_shared_info *shinfo = skb_shinfo(skb); + const struct skb_shared_info *shinfo = skb_shinfo(skb); + if (skb_is_nonlinear(skb) && shinfo->gso_size != 0 && unlikely(shinfo->gso_type == 0)) { __skb_warn_lro_forwarding(skb); @@ -2281,7 +2483,7 @@ static inline void skb_forward_csum(struct sk_buff *skb) * Instead of forcing ip_summed to CHECKSUM_NONE, we can * use this helper, to document places where we make this assertion. */ -static inline void skb_checksum_none_assert(struct sk_buff *skb) +static inline void skb_checksum_none_assert(const struct sk_buff *skb) { #ifdef DEBUG BUG_ON(skb->ip_summed != CHECKSUM_NONE); @@ -2290,5 +2492,25 @@ static inline void skb_checksum_none_assert(struct sk_buff *skb) bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off); +static inline bool skb_is_recycleable(const struct sk_buff *skb, int skb_size) +{ + if (irqs_disabled()) + return false; + + if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) + return false; + + if (skb_is_nonlinear(skb) || skb->fclone != SKB_FCLONE_UNAVAILABLE) + return false; + + skb_size = SKB_DATA_ALIGN(skb_size + NET_SKB_PAD); + if (skb_end_pointer(skb) - skb->head < skb_size) + return false; + + if (skb_shared(skb) || skb_cloned(skb)) + return false; + + return true; +} #endif /* __KERNEL__ */ #endif /* _LINUX_SKBUFF_H */ diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 8623217f84d..f10ed7b4a71 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -25,7 +25,7 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index efbf459d571..98941203a27 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -462,6 +462,46 @@ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ +/* Values for boardflags_lo read from SPROM */ +#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ +#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ +#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ +#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ +#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ +#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ +#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ +#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ +#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ +#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ +#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ +#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ +#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ +#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ +#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ +#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ + +/* Values for boardflags_hi read from SPROM */ +#define SSB_BFH_NOPA 0x0001 /* has no PA */ +#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ +#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ +#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ +#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ +#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ +#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ + +/* Values for boardflags2_lo read from SPROM */ +#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ +#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ +#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ +#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ +#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ +#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ +#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ +#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ +#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ +#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ +#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ + /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, diff --git a/include/linux/sungem_phy.h b/include/linux/sungem_phy.h new file mode 100644 index 00000000000..bd9be9f59d3 --- /dev/null +++ b/include/linux/sungem_phy.h @@ -0,0 +1,132 @@ +#ifndef __SUNGEM_PHY_H__ +#define __SUNGEM_PHY_H__ + +struct mii_phy; + +/* Operations supported by any kind of PHY */ +struct mii_phy_ops +{ + int (*init)(struct mii_phy *phy); + int (*suspend)(struct mii_phy *phy); + int (*setup_aneg)(struct mii_phy *phy, u32 advertise); + int (*setup_forced)(struct mii_phy *phy, int speed, int fd); + int (*poll_link)(struct mii_phy *phy); + int (*read_link)(struct mii_phy *phy); + int (*enable_fiber)(struct mii_phy *phy, int autoneg); +}; + +/* Structure used to statically define an mii/gii based PHY */ +struct mii_phy_def +{ + u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ + u32 phy_id_mask; /* Significant bits */ + u32 features; /* Ethtool SUPPORTED_* defines */ + int magic_aneg; /* Autoneg does all speed test for us */ + const char* name; + const struct mii_phy_ops* ops; +}; + +enum { + BCM54XX_COPPER, + BCM54XX_FIBER, + BCM54XX_GBIC, + BCM54XX_SGMII, + BCM54XX_UNKNOWN, +}; + +/* An instance of a PHY, partially borrowed from mii_if_info */ +struct mii_phy +{ + struct mii_phy_def* def; + u32 advertising; + int mii_id; + + /* 1: autoneg enabled, 0: disabled */ + int autoneg; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + + /* Provided by host chip */ + struct net_device *dev; + int (*mdio_read) (struct net_device *dev, int mii_id, int reg); + void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val); + void *platform_data; +}; + +/* Pass in a struct mii_phy with dev, mdio_read and mdio_write + * filled, the remaining fields will be filled on return + */ +extern int sungem_phy_probe(struct mii_phy *phy, int mii_id); + + +/* MII definitions missing from mii.h */ + +#define BMCR_SPD2 0x0040 /* Gigabit enable (bcm54xx) */ +#define LPA_PAUSE 0x0400 + +/* More PHY registers (model specific) */ + +/* MII BCM5201 MULTIPHY interrupt register */ +#define MII_BCM5201_INTERRUPT 0x1A +#define MII_BCM5201_INTERRUPT_INTENABLE 0x4000 + +#define MII_BCM5201_AUXMODE2 0x1B +#define MII_BCM5201_AUXMODE2_LOWPOWER 0x0008 + +#define MII_BCM5201_MULTIPHY 0x1E + +/* MII BCM5201 MULTIPHY register bits */ +#define MII_BCM5201_MULTIPHY_SERIALMODE 0x0002 +#define MII_BCM5201_MULTIPHY_SUPERISOLATE 0x0008 + +/* MII BCM5221 Additional registers */ +#define MII_BCM5221_TEST 0x1f +#define MII_BCM5221_TEST_ENABLE_SHADOWS 0x0080 +#define MII_BCM5221_SHDOW_AUX_STAT2 0x1b +#define MII_BCM5221_SHDOW_AUX_STAT2_APD 0x0020 +#define MII_BCM5221_SHDOW_AUX_MODE4 0x1a +#define MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE 0x0001 +#define MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR 0x0004 + +/* MII BCM5241 Additional registers */ +#define MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR 0x0008 + +/* MII BCM5400 1000-BASET Control register */ +#define MII_BCM5400_GB_CONTROL 0x09 +#define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP 0x0200 + +/* MII BCM5400 AUXCONTROL register */ +#define MII_BCM5400_AUXCONTROL 0x18 +#define MII_BCM5400_AUXCONTROL_PWR10BASET 0x0004 + +/* MII BCM5400 AUXSTATUS register */ +#define MII_BCM5400_AUXSTATUS 0x19 +#define MII_BCM5400_AUXSTATUS_LINKMODE_MASK 0x0700 +#define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT 8 + +/* 1000BT control (Marvell & BCM54xx at least) */ +#define MII_1000BASETCONTROL 0x09 +#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 +#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 + +/* Marvell 88E1011 PHY control */ +#define MII_M1011_PHY_SPEC_CONTROL 0x10 +#define MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX 0x20 +#define MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX 0x40 + +/* Marvell 88E1011 PHY status */ +#define MII_M1011_PHY_SPEC_STATUS 0x11 +#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 +#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 +#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 +#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 +#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 +#define MII_M1011_PHY_SPEC_STATUS_TX_PAUSE 0x0008 +#define MII_M1011_PHY_SPEC_STATUS_RX_PAUSE 0x0004 + +#endif /* __SUNGEM_PHY_H__ */ diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 11684d9e6bd..9a1ec10fd50 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -435,7 +435,7 @@ enum { NET_IPV4_ROUTE_MAX_SIZE=5, NET_IPV4_ROUTE_GC_MIN_INTERVAL=6, NET_IPV4_ROUTE_GC_TIMEOUT=7, - NET_IPV4_ROUTE_GC_INTERVAL=8, + NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */ NET_IPV4_ROUTE_REDIRECT_LOAD=9, NET_IPV4_ROUTE_REDIRECT_NUMBER=10, NET_IPV4_ROUTE_REDIRECT_SILENCE=11, diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index d7d2f215814..dac0859e644 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -112,6 +112,7 @@ struct bin_attribute { struct sysfs_ops { ssize_t (*show)(struct kobject *, struct attribute *,char *); ssize_t (*store)(struct kobject *,struct attribute *,const char *, size_t); + const void *(*namespace)(struct kobject *, const struct attribute *); }; struct sysfs_dirent; diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 531ede8006d..7f59ee94698 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -111,7 +111,8 @@ enum { #define TCPI_OPT_TIMESTAMPS 1 #define TCPI_OPT_SACK 2 #define TCPI_OPT_WSCALE 4 -#define TCPI_OPT_ECN 8 +#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ +#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ enum tcp_ca_state { TCP_CA_Open = 0, @@ -379,6 +380,10 @@ struct tcp_sock { u32 snd_cwnd_clamp; /* Do not allow snd_cwnd to grow above this */ u32 snd_cwnd_used; u32 snd_cwnd_stamp; + u32 prior_cwnd; /* Congestion window at start of Recovery. */ + u32 prr_delivered; /* Number of newly delivered packets to + * receiver in Recovery. */ + u32 prr_out; /* Total number of pkts sent during Recovery. */ u32 rcv_wnd; /* Current receiver window */ u32 write_seq; /* Tail(+1) of data held in tcp send buffer */ diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h index 0db239590b4..9730b0e51e4 100644 --- a/include/linux/tipc_config.h +++ b/include/linux/tipc_config.h @@ -41,6 +41,10 @@ #include <linux/string.h> #include <asm/byteorder.h> +#ifndef __KERNEL__ +#include <arpa/inet.h> /* for ntohs etc. */ +#endif + /* * Configuration * diff --git a/include/linux/un.h b/include/linux/un.h index 45561c564b8..3ed3e46c1b1 100644 --- a/include/linux/un.h +++ b/include/linux/un.h @@ -1,10 +1,12 @@ #ifndef _LINUX_UN_H #define _LINUX_UN_H +#include <linux/socket.h> + #define UNIX_PATH_MAX 108 struct sockaddr_un { - sa_family_t sun_family; /* AF_UNIX */ + __kernel_sa_family_t sun_family; /* AF_UNIX */ char sun_path[UNIX_PATH_MAX]; /* pathname */ }; diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 71088574960..851ebf1a447 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -61,6 +61,9 @@ struct virtqueue { * virtqueue_detach_unused_buf: detach first unused buffer * vq: the struct virtqueue we're talking about. * Returns NULL or the "data" token handed to add_buf + * virtqueue_get_vring_size: return the size of the virtqueue's vring + * vq: the struct virtqueue containing the vring of interest. + * Returns the size of the vring. * * Locking rules are straightforward: the driver is responsible for * locking. No two operations may be invoked simultaneously, with the exception @@ -97,6 +100,8 @@ bool virtqueue_enable_cb_delayed(struct virtqueue *vq); void *virtqueue_detach_unused_buf(struct virtqueue *vq); +unsigned int virtqueue_get_vring_size(struct virtqueue *vq); + /** * virtio_device - representation of a device using virtio * @index: unique position on the virtio bus diff --git a/include/linux/x25.h b/include/linux/x25.h index 6450a7f1207..810cce6737e 100644 --- a/include/linux/x25.h +++ b/include/linux/x25.h @@ -12,6 +12,7 @@ #define X25_KERNEL_H #include <linux/types.h> +#include <linux/socket.h> #define SIOCX25GSUBSCRIP (SIOCPROTOPRIVATE + 0) #define SIOCX25SSUBSCRIP (SIOCPROTOPRIVATE + 1) @@ -57,7 +58,7 @@ struct x25_address { * Linux X.25 Address structure, used for bind, and connect mostly. */ struct sockaddr_x25 { - sa_family_t sx25_family; /* Must be AF_X25 */ + __kernel_sa_family_t sx25_family; /* Must be AF_X25 */ struct x25_address sx25_addr; /* X.121 Address */ }; |