diff options
Diffstat (limited to 'drivers/staging/ath6kl/os/linux')
19 files changed, 0 insertions, 14117 deletions
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c deleted file mode 100644 index 32ee39ad00d..00000000000 --- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c +++ /dev/null @@ -1,6267 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -/* - * This driver is a pseudo ethernet driver to access the Atheros AR6000 - * WLAN Device - */ - -#include "ar6000_drv.h" -#include "cfg80211.h" -#include "htc.h" -#include "wmi_filter_linux.h" -#include "epping_test.h" -#include "wlan_config.h" -#include "ar3kconfig.h" -#include "ar6k_pal.h" -#include "AR6002/addrs.h" - - -/* LINUX_HACK_FUDGE_FACTOR -- this is used to provide a workaround for linux behavior. When - * the meta data was added to the header it was found that linux did not correctly provide - * enough headroom. However when more headroom was requested beyond what was truly needed - * Linux gave the requested headroom. Therefore to get the necessary headroom from Linux - * the driver requests more than is needed by the amount = LINUX_HACK_FUDGE_FACTOR */ -#define LINUX_HACK_FUDGE_FACTOR 16 -#define BDATA_BDADDR_OFFSET 28 - -u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; -u8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; - -#ifdef DEBUG - -#define ATH_DEBUG_DBG_LOG ATH_DEBUG_MAKE_MODULE_MASK(0) -#define ATH_DEBUG_WLAN_CONNECT ATH_DEBUG_MAKE_MODULE_MASK(1) -#define ATH_DEBUG_WLAN_SCAN ATH_DEBUG_MAKE_MODULE_MASK(2) -#define ATH_DEBUG_WLAN_TX ATH_DEBUG_MAKE_MODULE_MASK(3) -#define ATH_DEBUG_WLAN_RX ATH_DEBUG_MAKE_MODULE_MASK(4) -#define ATH_DEBUG_HTC_RAW ATH_DEBUG_MAKE_MODULE_MASK(5) -#define ATH_DEBUG_HCI_BRIDGE ATH_DEBUG_MAKE_MODULE_MASK(6) - -static struct ath_debug_mask_description driver_debug_desc[] = { - { ATH_DEBUG_DBG_LOG , "Target Debug Logs"}, - { ATH_DEBUG_WLAN_CONNECT , "WLAN connect"}, - { ATH_DEBUG_WLAN_SCAN , "WLAN scan"}, - { ATH_DEBUG_WLAN_TX , "WLAN Tx"}, - { ATH_DEBUG_WLAN_RX , "WLAN Rx"}, - { ATH_DEBUG_HTC_RAW , "HTC Raw IF tracing"}, - { ATH_DEBUG_HCI_BRIDGE , "HCI Bridge Setup"}, - { ATH_DEBUG_HCI_RECV , "HCI Recv tracing"}, - { ATH_DEBUG_HCI_DUMP , "HCI Packet dumps"}, -}; - -ATH_DEBUG_INSTANTIATE_MODULE_VAR(driver, - "driver", - "Linux Driver Interface", - ATH_DEBUG_MASK_DEFAULTS | ATH_DEBUG_WLAN_SCAN | - ATH_DEBUG_HCI_BRIDGE, - ATH_DEBUG_DESCRIPTION_COUNT(driver_debug_desc), - driver_debug_desc); - -#endif - - -#define IS_MAC_NULL(mac) (mac[0]==0 && mac[1]==0 && mac[2]==0 && mac[3]==0 && mac[4]==0 && mac[5]==0) -#define IS_MAC_BCAST(mac) (*mac==0xff) - -#define DESCRIPTION "Driver to access the Atheros AR600x Device, version " __stringify(__VER_MAJOR_) "." __stringify(__VER_MINOR_) "." __stringify(__VER_PATCH_) "." __stringify(__BUILD_NUMBER_) - -MODULE_AUTHOR("Atheros Communications, Inc."); -MODULE_DESCRIPTION(DESCRIPTION); -MODULE_LICENSE("Dual BSD/GPL"); - -#ifndef REORG_APTC_HEURISTICS -#undef ADAPTIVE_POWER_THROUGHPUT_CONTROL -#endif /* REORG_APTC_HEURISTICS */ - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -#define APTC_TRAFFIC_SAMPLING_INTERVAL 100 /* msec */ -#define APTC_UPPER_THROUGHPUT_THRESHOLD 3000 /* Kbps */ -#define APTC_LOWER_THROUGHPUT_THRESHOLD 2000 /* Kbps */ - -typedef struct aptc_traffic_record { - bool timerScheduled; - struct timeval samplingTS; - unsigned long bytesReceived; - unsigned long bytesTransmitted; -} APTC_TRAFFIC_RECORD; - -A_TIMER aptcTimer; -APTC_TRAFFIC_RECORD aptcTR; -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -// callbacks registered by HCI transport driver -struct hci_transport_callbacks ar6kHciTransCallbacks = { NULL }; -#endif - -unsigned int processDot11Hdr = 0; - -char ifname[IFNAMSIZ] = {0,}; - -int wlaninitmode = WLAN_INIT_MODE_DEFAULT; -static bool bypasswmi; -unsigned int debuglevel = 0; -int tspecCompliance = ATHEROS_COMPLIANCE; -unsigned int busspeedlow = 0; -unsigned int onebitmode = 0; -unsigned int skipflash = 0; -unsigned int wmitimeout = 2; -unsigned int wlanNodeCaching = 1; -unsigned int enableuartprint = ENABLEUARTPRINT_DEFAULT; -unsigned int logWmiRawMsgs = 0; -unsigned int enabletimerwar = 0; -unsigned int num_device = 1; -unsigned int regscanmode; -unsigned int fwmode = 1; -unsigned int mbox_yield_limit = 99; -unsigned int enablerssicompensation = 0; -int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF; -int allow_trace_signal = 0; -#ifdef CONFIG_HOST_TCMD_SUPPORT -unsigned int testmode =0; -#endif - -unsigned int irqprocmode = HIF_DEVICE_IRQ_SYNC_ONLY;//HIF_DEVICE_IRQ_ASYNC_SYNC; -unsigned int panic_on_assert = 1; -unsigned int nohifscattersupport = NOHIFSCATTERSUPPORT_DEFAULT; - -unsigned int setuphci = SETUPHCI_DEFAULT; -unsigned int loghci = 0; -unsigned int setupbtdev = SETUPBTDEV_DEFAULT; -#ifndef EXPORT_HCI_BRIDGE_INTERFACE -unsigned int ar3khcibaud = AR3KHCIBAUD_DEFAULT; -unsigned int hciuartscale = HCIUARTSCALE_DEFAULT; -unsigned int hciuartstep = HCIUARTSTEP_DEFAULT; -#endif -unsigned int csumOffload=0; -unsigned int csumOffloadTest=0; -unsigned int eppingtest=0; -unsigned int mac_addr_method; -unsigned int firmware_bridge; - -module_param_string(ifname, ifname, sizeof(ifname), 0644); -module_param(wlaninitmode, int, 0644); -module_param(bypasswmi, bool, 0644); -module_param(debuglevel, uint, 0644); -module_param(tspecCompliance, int, 0644); -module_param(onebitmode, uint, 0644); -module_param(busspeedlow, uint, 0644); -module_param(skipflash, uint, 0644); -module_param(wmitimeout, uint, 0644); -module_param(wlanNodeCaching, uint, 0644); -module_param(logWmiRawMsgs, uint, 0644); -module_param(enableuartprint, uint, 0644); -module_param(enabletimerwar, uint, 0644); -module_param(fwmode, uint, 0644); -module_param(mbox_yield_limit, uint, 0644); -module_param(reduce_credit_dribble, int, 0644); -module_param(allow_trace_signal, int, 0644); -module_param(enablerssicompensation, uint, 0644); -module_param(processDot11Hdr, uint, 0644); -module_param(csumOffload, uint, 0644); -#ifdef CONFIG_HOST_TCMD_SUPPORT -module_param(testmode, uint, 0644); -#endif -module_param(irqprocmode, uint, 0644); -module_param(nohifscattersupport, uint, 0644); -module_param(panic_on_assert, uint, 0644); -module_param(setuphci, uint, 0644); -module_param(loghci, uint, 0644); -module_param(setupbtdev, uint, 0644); -#ifndef EXPORT_HCI_BRIDGE_INTERFACE -module_param(ar3khcibaud, uint, 0644); -module_param(hciuartscale, uint, 0644); -module_param(hciuartstep, uint, 0644); -#endif -module_param(eppingtest, uint, 0644); - -/* in 2.6.10 and later this is now a pointer to a uint */ -unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX; -#define mboxnum &_mboxnum - -#ifdef DEBUG -u32 g_dbg_flags = DBG_DEFAULTS; -unsigned int debugflags = 0; -int debugdriver = 0; -unsigned int debughtc = 0; -unsigned int debugbmi = 0; -unsigned int debughif = 0; -unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0}; -module_param(debugflags, uint, 0644); -module_param(debugdriver, int, 0644); -module_param(debughtc, uint, 0644); -module_param(debugbmi, uint, 0644); -module_param(debughif, uint, 0644); -module_param_array(txcreditsavailable, uint, mboxnum, 0644); -module_param_array(txcreditsconsumed, uint, mboxnum, 0644); -module_param_array(txcreditintrenable, uint, mboxnum, 0644); -module_param_array(txcreditintrenableaggregate, uint, mboxnum, 0644); - -#endif /* DEBUG */ - -unsigned int resetok = 1; -unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int hifBusRequestNumMax = 40; -unsigned int war23838_disabled = 0; -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -unsigned int enableAPTCHeuristics = 1; -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -module_param_array(tx_attempt, uint, mboxnum, 0644); -module_param_array(tx_post, uint, mboxnum, 0644); -module_param_array(tx_complete, uint, mboxnum, 0644); -module_param(hifBusRequestNumMax, uint, 0644); -module_param(war23838_disabled, uint, 0644); -module_param(resetok, uint, 0644); -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -module_param(enableAPTCHeuristics, uint, 0644); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - -#ifdef BLOCK_TX_PATH_FLAG -int blocktx = 0; -module_param(blocktx, int, 0644); -#endif /* BLOCK_TX_PATH_FLAG */ - -typedef struct user_rssi_compensation_t { - u16 customerID; - union { - u16 a_enable; - u16 bg_enable; - u16 enable; - }; - s16 bg_param_a; - s16 bg_param_b; - s16 a_param_a; - s16 a_param_b; - u32 reserved; -} USER_RSSI_CPENSATION; - -static USER_RSSI_CPENSATION rssi_compensation_param; - -static s16 rssi_compensation_table[96]; - -int reconnect_flag = 0; -static ar6k_pal_config_t ar6k_pal_config_g; - -/* Function declarations */ -static int ar6000_init_module(void); -static void ar6000_cleanup_module(void); - -int ar6000_init(struct net_device *dev); -static int ar6000_open(struct net_device *dev); -static int ar6000_close(struct net_device *dev); -static void ar6000_init_control_info(struct ar6_softc *ar); -static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev); - -void ar6000_destroy(struct net_device *dev, unsigned int unregister); -static void ar6000_detect_error(unsigned long ptr); -static void ar6000_set_multicast_list(struct net_device *dev); -static struct net_device_stats *ar6000_get_stats(struct net_device *dev); - -static void disconnect_timer_handler(unsigned long ptr); - -void read_rssi_compensation_param(struct ar6_softc *ar); - -/* - * HTC service connection handlers - */ -static int ar6000_avail_ev(void *context, void *hif_handle); - -static int ar6000_unavail_ev(void *context, void *hif_handle); - -int ar6000_configure_target(struct ar6_softc *ar); - -static void ar6000_target_failure(void *Instance, int Status); - -static void ar6000_rx(void *Context, struct htc_packet *pPacket); - -static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint); - -static void ar6000_tx_complete(void *Context, struct htc_packet_queue *pPackets); - -static HTC_SEND_FULL_ACTION ar6000_tx_queue_full(void *Context, struct htc_packet *pPacket); - -static void ar6000_alloc_netbufs(A_NETBUF_QUEUE_T *q, u16 num); -static void ar6000_deliver_frames_to_nw_stack(void * dev, void *osbuf); -//static void ar6000_deliver_frames_to_bt_stack(void * dev, void *osbuf); - -static struct htc_packet *ar6000_alloc_amsdu_rxbuf(void *Context, HTC_ENDPOINT_ID Endpoint, int Length); - -static void ar6000_refill_amsdu_rxbufs(struct ar6_softc *ar, int Count); - -static void ar6000_cleanup_amsdu_rxbufs(struct ar6_softc *ar); - -static ssize_t -ar6000_sysfs_bmi_read(struct file *fp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t pos, size_t count); - -static ssize_t -ar6000_sysfs_bmi_write(struct file *fp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t pos, size_t count); - -static int -ar6000_sysfs_bmi_init(struct ar6_softc *ar); - -void ar6k_cleanup_hci_pal(struct ar6_softc *ar); - -static void -ar6000_sysfs_bmi_deinit(struct ar6_softc *ar); - -int -ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode); - -/* - * Static variables - */ - -struct net_device *ar6000_devices[MAX_AR6000]; -static int is_netdev_registered; -DECLARE_WAIT_QUEUE_HEAD(arEvent); -static void ar6000_cookie_init(struct ar6_softc *ar); -static void ar6000_cookie_cleanup(struct ar6_softc *ar); -static void ar6000_free_cookie(struct ar6_softc *ar, struct ar_cookie * cookie); -static struct ar_cookie *ar6000_alloc_cookie(struct ar6_softc *ar); - -static int ar6000_reinstall_keys(struct ar6_softc *ar,u8 key_op_ctrl); - -#ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT -struct net_device *arApNetDev; -#endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - -static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM]; - -#define HOST_INTEREST_ITEM_ADDRESS(ar, item) \ - (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_HOST_INTEREST_ITEM_ADDRESS(item) : \ - (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_HOST_INTEREST_ITEM_ADDRESS(item) : 0)) - - -static struct net_device_ops ar6000_netdev_ops = { - .ndo_init = NULL, - .ndo_open = ar6000_open, - .ndo_stop = ar6000_close, - .ndo_get_stats = ar6000_get_stats, - .ndo_start_xmit = ar6000_data_tx, - .ndo_set_multicast_list = ar6000_set_multicast_list, -}; - -/* Debug log support */ - -/* - * Flag to govern whether the debug logs should be parsed in the kernel - * or reported to the application. - */ -#define REPORT_DEBUG_LOGS_TO_APP - -int -ar6000_set_host_app_area(struct ar6_softc *ar) -{ - u32 address, data; - struct host_app_area_s host_app_area; - - /* Fetch the address of the host_app_area_s instance in the host interest area */ - address = TARG_VTOP(ar->arTargetType, HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest)); - if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != 0) { - return A_ERROR; - } - address = TARG_VTOP(ar->arTargetType, data); - host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION; - if (ar6000_WriteDataDiag(ar->arHifDevice, address, - (u8 *)&host_app_area, - sizeof(struct host_app_area_s)) != 0) - { - return A_ERROR; - } - - return 0; -} - -u32 dbglog_get_debug_hdr_ptr(struct ar6_softc *ar) -{ - u32 param; - u32 address; - int status; - - address = TARG_VTOP(ar->arTargetType, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr)); - if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address, - (u8 *)¶m, 4)) != 0) - { - param = 0; - } - - return param; -} - -/* - * The dbglog module has been initialized. Its ok to access the relevant - * data stuctures over the diagnostic window. - */ -void -ar6000_dbglog_init_done(struct ar6_softc *ar) -{ - ar->dbglog_init_done = true; -} - -u32 dbglog_get_debug_fragment(s8 *datap, u32 len, u32 limit) -{ - s32 *buffer; - u32 count; - u32 numargs; - u32 length; - u32 fraglen; - - count = fraglen = 0; - buffer = (s32 *)datap; - length = (limit >> 2); - - if (len <= limit) { - fraglen = len; - } else { - while (count < length) { - numargs = DBGLOG_GET_NUMARGS(buffer[count]); - fraglen = (count << 2); - count += numargs + 1; - } - } - - return fraglen; -} - -void -dbglog_parse_debug_logs(s8 *datap, u32 len) -{ - s32 *buffer; - u32 count; - u32 timestamp; - u32 debugid; - u32 moduleid; - u32 numargs; - u32 length; - - count = 0; - buffer = (s32 *)datap; - length = (len >> 2); - while (count < length) { - debugid = DBGLOG_GET_DBGID(buffer[count]); - moduleid = DBGLOG_GET_MODULEID(buffer[count]); - numargs = DBGLOG_GET_NUMARGS(buffer[count]); - timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]); - switch (numargs) { - case 0: - AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d)\n", moduleid, debugid, timestamp)); - break; - - case 1: - AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d): 0x%x\n", moduleid, debugid, - timestamp, buffer[count+1])); - break; - - case 2: - AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid, - timestamp, buffer[count+1], buffer[count+2])); - break; - - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid args: %d\n", numargs)); - } - count += numargs + 1; - } -} - -int -ar6000_dbglog_get_debug_logs(struct ar6_softc *ar) -{ - u32 data[8]; /* Should be able to accommodate struct dbglog_buf_s */ - u32 address; - u32 length; - u32 dropped; - u32 firstbuf; - u32 debug_hdr_ptr; - - if (!ar->dbglog_init_done) return A_ERROR; - - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - if (ar->dbgLogFetchInProgress) { - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - return A_EBUSY; - } - - /* block out others */ - ar->dbgLogFetchInProgress = true; - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar); - printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr); - - /* Get the contents of the ring buffer */ - if (debug_hdr_ptr) { - address = TARG_VTOP(ar->arTargetType, debug_hdr_ptr); - length = 4 /* sizeof(dbuf) */ + 4 /* sizeof(dropped) */; - A_MEMZERO(data, sizeof(data)); - ar6000_ReadDataDiag(ar->arHifDevice, address, (u8 *)data, length); - address = TARG_VTOP(ar->arTargetType, data[0] /* dbuf */); - firstbuf = address; - dropped = data[1]; /* dropped */ - length = 4 /* sizeof(next) */ + 4 /* sizeof(buffer) */ + 4 /* sizeof(bufsize) */ + 4 /* sizeof(length) */ + 4 /* sizeof(count) */ + 4 /* sizeof(free) */; - A_MEMZERO(data, sizeof(data)); - ar6000_ReadDataDiag(ar->arHifDevice, address, (u8 *)&data, length); - - do { - address = TARG_VTOP(ar->arTargetType, data[1] /* buffer*/); - length = data[3]; /* length */ - if ((length) && (length <= data[2] /* bufsize*/)) { - /* Rewind the index if it is about to overrun the buffer */ - if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) { - ar->log_cnt = 0; - } - if(0 != ar6000_ReadDataDiag(ar->arHifDevice, address, - (u8 *)&ar->log_buffer[ar->log_cnt], length)) - { - break; - } - ar6000_dbglog_event(ar, dropped, (s8 *)&ar->log_buffer[ar->log_cnt], length); - ar->log_cnt += length; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("Length: %d (Total size: %d)\n", - data[3], data[2])); - } - - address = TARG_VTOP(ar->arTargetType, data[0] /* next */); - length = 4 /* sizeof(next) */ + 4 /* sizeof(buffer) */ + 4 /* sizeof(bufsize) */ + 4 /* sizeof(length) */ + 4 /* sizeof(count) */ + 4 /* sizeof(free) */; - A_MEMZERO(data, sizeof(data)); - if(0 != ar6000_ReadDataDiag(ar->arHifDevice, address, - (u8 *)&data, length)) - { - break; - } - - } while (address != firstbuf); - } - - ar->dbgLogFetchInProgress = false; - - return 0; -} - -void -ar6000_dbglog_event(struct ar6_softc *ar, u32 dropped, - s8 *buffer, u32 length) -{ -#ifdef REPORT_DEBUG_LOGS_TO_APP - #define MAX_WIRELESS_EVENT_SIZE 252 - /* - * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages. - * There seems to be a limitation on the length of message that could be - * transmitted to the user app via this mechanism. - */ - u32 send, sent; - - sent = 0; - send = dbglog_get_debug_fragment(&buffer[sent], length - sent, - MAX_WIRELESS_EVENT_SIZE); - while (send) { - sent += send; - send = dbglog_get_debug_fragment(&buffer[sent], length - sent, - MAX_WIRELESS_EVENT_SIZE); - } -#else - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Dropped logs: 0x%x\nDebug info length: %d\n", - dropped, length)); - - /* Interpret the debug logs */ - dbglog_parse_debug_logs((s8 *)buffer, length); -#endif /* REPORT_DEBUG_LOGS_TO_APP */ -} - - -static int __init -ar6000_init_module(void) -{ - static int probed = 0; - int r; - OSDRV_CALLBACKS osdrvCallbacks; - - a_module_debug_support_init(); - -#ifdef DEBUG - /* check for debug mask overrides */ - if (debughtc != 0) { - ATH_DEBUG_SET_DEBUG_MASK(htc,debughtc); - } - if (debugbmi != 0) { - ATH_DEBUG_SET_DEBUG_MASK(bmi,debugbmi); - } - if (debughif != 0) { - ATH_DEBUG_SET_DEBUG_MASK(hif,debughif); - } - if (debugdriver != 0) { - ATH_DEBUG_SET_DEBUG_MASK(driver,debugdriver); - } - -#endif - - A_REGISTER_MODULE_DEBUG_INFO(driver); - - A_MEMZERO(&osdrvCallbacks,sizeof(osdrvCallbacks)); - osdrvCallbacks.deviceInsertedHandler = ar6000_avail_ev; - osdrvCallbacks.deviceRemovedHandler = ar6000_unavail_ev; -#ifdef CONFIG_PM - osdrvCallbacks.deviceSuspendHandler = ar6000_suspend_ev; - osdrvCallbacks.deviceResumeHandler = ar6000_resume_ev; - osdrvCallbacks.devicePowerChangeHandler = ar6000_power_change_ev; -#endif - -#ifdef DEBUG - /* Set the debug flags if specified at load time */ - if(debugflags != 0) - { - g_dbg_flags = debugflags; - } -#endif - - if (probed) { - return -ENODEV; - } - probed++; - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD)); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - - r = HIFInit(&osdrvCallbacks); - if (r) - return r; - - return 0; -} - -static void __exit -ar6000_cleanup_module(void) -{ - int i = 0; - struct net_device *ar6000_netdev; - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - /* Delete the Adaptive Power Control timer */ - if (timer_pending(&aptcTimer)) { - del_timer_sync(&aptcTimer); - } -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - - for (i=0; i < MAX_AR6000; i++) { - if (ar6000_devices[i] != NULL) { - ar6000_netdev = ar6000_devices[i]; - ar6000_devices[i] = NULL; - ar6000_destroy(ar6000_netdev, 1); - } - } - - HIFShutDownDevice(NULL); - - a_module_debug_support_cleanup(); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_cleanup: success\n")); -} - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -void -aptcTimerHandler(unsigned long arg) -{ - u32 numbytes; - u32 throughput; - struct ar6_softc *ar; - int status; - - ar = (struct ar6_softc *)arg; - A_ASSERT(ar != NULL); - A_ASSERT(!timer_pending(&aptcTimer)); - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - /* Get the number of bytes transferred */ - numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived; - aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0; - - /* Calculate and decide based on throughput thresholds */ - throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */ - if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) { - /* Enable Sleep and delete the timer */ - A_ASSERT(ar->arWmiReady == true); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - status = wmi_powermode_cmd(ar->arWmi, REC_POWER); - AR6000_SPIN_LOCK(&ar->arLock, 0); - A_ASSERT(status == 0); - aptcTR.timerScheduled = false; - } else { - A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0); - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); -} -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - -static void -ar6000_alloc_netbufs(A_NETBUF_QUEUE_T *q, u16 num) -{ - void * osbuf; - - while(num) { - if((osbuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE))) { - A_NETBUF_ENQUEUE(q, osbuf); - } else { - break; - } - num--; - } - - if(num) { - A_PRINTF("%s(), allocation of netbuf failed", __func__); - } -} - -static struct bin_attribute bmi_attr = { - .attr = {.name = "bmi", .mode = 0600}, - .read = ar6000_sysfs_bmi_read, - .write = ar6000_sysfs_bmi_write, -}; - -static ssize_t -ar6000_sysfs_bmi_read(struct file *fp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t pos, size_t count) -{ - int index; - struct ar6_softc *ar; - struct hif_device_os_device_info *osDevInfo; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Read %d bytes\n", (u32)count)); - for (index=0; index < MAX_AR6000; index++) { - ar = (struct ar6_softc *)ar6k_priv(ar6000_devices[index]); - osDevInfo = &ar->osDevInfo; - if (kobj == (&(((struct device *)osDevInfo->pOSDevice)->kobj))) { - break; - } - } - - if (index == MAX_AR6000) return 0; - - if ((BMIRawRead(ar->arHifDevice, (u8*)buf, count, true)) != 0) { - return 0; - } - - return count; -} - -static ssize_t -ar6000_sysfs_bmi_write(struct file *fp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t pos, size_t count) -{ - int index; - struct ar6_softc *ar; - struct hif_device_os_device_info *osDevInfo; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Write %d bytes\n", (u32)count)); - for (index=0; index < MAX_AR6000; index++) { - ar = (struct ar6_softc *)ar6k_priv(ar6000_devices[index]); - osDevInfo = &ar->osDevInfo; - if (kobj == (&(((struct device *)osDevInfo->pOSDevice)->kobj))) { - break; - } - } - - if (index == MAX_AR6000) return 0; - - if ((BMIRawWrite(ar->arHifDevice, (u8*)buf, count)) != 0) { - return 0; - } - - return count; -} - -static int -ar6000_sysfs_bmi_init(struct ar6_softc *ar) -{ - int status; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Creating sysfs entry\n")); - A_MEMZERO(&ar->osDevInfo, sizeof(struct hif_device_os_device_info)); - - /* Get the underlying OS device */ - status = HIFConfigureDevice(ar->arHifDevice, - HIF_DEVICE_GET_OS_DEVICE, - &ar->osDevInfo, - sizeof(struct hif_device_os_device_info)); - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI: Failed to get OS device info from HIF\n")); - return A_ERROR; - } - - /* Create a bmi entry in the sysfs filesystem */ - if ((sysfs_create_bin_file(&(((struct device *)ar->osDevInfo.pOSDevice)->kobj), &bmi_attr)) < 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMI: Failed to create entry for bmi in sysfs filesystem\n")); - return A_ERROR; - } - - return 0; -} - -static void -ar6000_sysfs_bmi_deinit(struct ar6_softc *ar) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Deleting sysfs entry\n")); - - sysfs_remove_bin_file(&(((struct device *)ar->osDevInfo.pOSDevice)->kobj), &bmi_attr); -} - -#define bmifn(fn) do { \ - if ((fn) < 0) { \ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__)); \ - return A_ERROR; \ - } \ -} while(0) - -#ifdef SOFTMAC_FILE_USED -#define AR6002_MAC_ADDRESS_OFFSET 0x0A -#define AR6003_MAC_ADDRESS_OFFSET 0x16 -static -void calculate_crc(u32 TargetType, u8 *eeprom_data) -{ - u16 *ptr_crc; - u16 *ptr16_eeprom; - u16 checksum; - u32 i; - u32 eeprom_size; - - if (TargetType == TARGET_TYPE_AR6001) - { - eeprom_size = 512; - ptr_crc = (u16 *)eeprom_data; - } - else if (TargetType == TARGET_TYPE_AR6003) - { - eeprom_size = 1024; - ptr_crc = (u16 *)((u8 *)eeprom_data + 0x04); - } - else - { - eeprom_size = 768; - ptr_crc = (u16 *)((u8 *)eeprom_data + 0x04); - } - - - // Clear the crc - *ptr_crc = 0; - - // Recalculate new CRC - checksum = 0; - ptr16_eeprom = (u16 *)eeprom_data; - for (i = 0;i < eeprom_size; i += 2) - { - checksum = checksum ^ (*ptr16_eeprom); - ptr16_eeprom++; - } - checksum = 0xFFFF ^ checksum; - *ptr_crc = checksum; -} - -static void -ar6000_softmac_update(struct ar6_softc *ar, u8 *eeprom_data, size_t size) -{ - const char *source = "random generated"; - const struct firmware *softmac_entry; - u8 *ptr_mac; - switch (ar->arTargetType) { - case TARGET_TYPE_AR6002: - ptr_mac = (u8 *)((u8 *)eeprom_data + AR6002_MAC_ADDRESS_OFFSET); - break; - case TARGET_TYPE_AR6003: - ptr_mac = (u8 *)((u8 *)eeprom_data + AR6003_MAC_ADDRESS_OFFSET); - break; - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Target Type\n")); - return; - } - printk(KERN_DEBUG "MAC from EEPROM %pM\n", ptr_mac); - - /* create a random MAC in case we cannot read file from system */ - ptr_mac[0] = 0; - ptr_mac[1] = 0x03; - ptr_mac[2] = 0x7F; - ptr_mac[3] = random32() & 0xff; - ptr_mac[4] = random32() & 0xff; - ptr_mac[5] = random32() & 0xff; - if ((A_REQUEST_FIRMWARE(&softmac_entry, "softmac", ((struct device *)ar->osDevInfo.pOSDevice))) == 0) - { - char *macbuf = A_MALLOC_NOWAIT(softmac_entry->size+1); - if (macbuf) { - unsigned int softmac[6]; - memcpy(macbuf, softmac_entry->data, softmac_entry->size); - macbuf[softmac_entry->size] = '\0'; - if (sscanf(macbuf, "%02x:%02x:%02x:%02x:%02x:%02x", - &softmac[0], &softmac[1], &softmac[2], - &softmac[3], &softmac[4], &softmac[5])==6) { - int i; - for (i=0; i<6; ++i) { - ptr_mac[i] = softmac[i] & 0xff; - } - source = "softmac file"; - } - kfree(macbuf); - } - A_RELEASE_FIRMWARE(softmac_entry); - } - printk(KERN_DEBUG "MAC from %s %pM\n", source, ptr_mac); - calculate_crc(ar->arTargetType, eeprom_data); -} -#endif /* SOFTMAC_FILE_USED */ - -static int -ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address, bool compressed) -{ - int status; - const char *filename; - const struct firmware *fw_entry; - u32 fw_entry_size; - u8 **buf; - size_t *buf_len; - - switch (file) { - case AR6K_OTP_FILE: - buf = &ar->fw_otp; - buf_len = &ar->fw_otp_len; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_OTP_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_OTP_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_OTP_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - break; - - case AR6K_FIRMWARE_FILE: - buf = &ar->fw; - buf_len = &ar->fw_len; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_FIRMWARE_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - - if (eppingtest) { - bypasswmi = true; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_EPPING_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_EPPING_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_EPPING_FIRMWARE_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("eppingtest : unsupported firmware revision: %d\n", - ar->arVersion.target_ver)); - return A_ERROR; - } - compressed = false; - } - -#ifdef CONFIG_HOST_TCMD_SUPPORT - if(testmode) { - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_TCMD_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_TCMD_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_TCMD_FIRMWARE_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - compressed = false; - } -#endif -#ifdef HTC_RAW_INTERFACE - if (!eppingtest && bypasswmi) { - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_ART_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_ART_FIRMWARE_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - compressed = false; - } -#endif - break; - - case AR6K_PATCH_FILE: - buf = &ar->fw_patch; - buf_len = &ar->fw_patch_len; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_PATCH_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_PATCH_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_PATCH_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - break; - - case AR6K_BOARD_DATA_FILE: - buf = &ar->fw_data; - buf_len = &ar->fw_data_len; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_BOARD_DATA_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_BOARD_DATA_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_BOARD_DATA_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - break; - - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown file type: %d\n", file)); - return A_ERROR; - } - - if (*buf == NULL) { - if ((A_REQUEST_FIRMWARE(&fw_entry, filename, ((struct device *)ar->osDevInfo.pOSDevice))) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to get %s\n", filename)); - return A_ENOENT; - } - - *buf = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL); - *buf_len = fw_entry->size; - A_RELEASE_FIRMWARE(fw_entry); - } - -#ifdef SOFTMAC_FILE_USED - if (file==AR6K_BOARD_DATA_FILE && *buf_len) { - ar6000_softmac_update(ar, *buf, *buf_len); - } -#endif - - - fw_entry_size = *buf_len; - - /* Load extended board data for AR6003 */ - if ((file==AR6K_BOARD_DATA_FILE) && *buf) { - u32 board_ext_address; - u32 board_ext_data_size; - u32 board_data_size; - - board_ext_data_size = (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_BOARD_EXT_DATA_SZ : \ - (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_BOARD_EXT_DATA_SZ : 0)); - - board_data_size = (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_BOARD_DATA_SZ : \ - (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_BOARD_DATA_SZ : 0)); - - /* Determine where in Target RAM to write Board Data */ - bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data), (u8 *)&board_ext_address, 4)); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board extended Data download address: 0x%x\n", board_ext_address)); - - /* check whether the target has allocated memory for extended board data and file contains extended board data */ - if ((board_ext_address) && (*buf_len == (board_data_size + board_ext_data_size))) { - u32 param; - - status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (u8 *)(*buf + board_data_size), board_ext_data_size); - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__)); - return A_ERROR; - } - - /* Record the fact that extended board Data IS initialized */ - param = (board_ext_data_size << 16) | 1; - bmifn(BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data_config), - (unsigned char *)¶m, 4)); - } - fw_entry_size = board_data_size; - } - - if (compressed) { - status = BMIFastDownload(ar->arHifDevice, address, *buf, fw_entry_size); - } else { - status = BMIWriteMemory(ar->arHifDevice, address, *buf, fw_entry_size); - } - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__)); - return A_ERROR; - } - - return 0; -} - -int -ar6000_update_bdaddr(struct ar6_softc *ar) -{ - - if (setupbtdev != 0) { - u32 address; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (u8 *)&address, 4) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for hi_board_data failed\n")); - return A_ERROR; - } - - if (BMIReadMemory(ar->arHifDevice, address + BDATA_BDADDR_OFFSET, (u8 *)ar->bdaddr, 6) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for BD address failed\n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BDADDR 0x%x:0x%x:0x%x:0x%x:0x%x:0x%x\n", ar->bdaddr[0], - ar->bdaddr[1], ar->bdaddr[2], ar->bdaddr[3], - ar->bdaddr[4], ar->bdaddr[5])); - } - -return 0; -} - -int -ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Requesting device specific configuration\n")); - - if (mode == WLAN_INIT_MODE_UDEV) { - char version[16]; - const struct firmware *fw_entry; - - /* Get config using udev through a script in user space */ - sprintf(version, "%2.2x", ar->arVersion.target_ver); - if ((A_REQUEST_FIRMWARE(&fw_entry, version, ((struct device *)ar->osDevInfo.pOSDevice))) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI: Failure to get configuration for target version: %s\n", version)); - return A_ERROR; - } - - A_RELEASE_FIRMWARE(fw_entry); - } else { - /* The config is contained within the driver itself */ - int status; - u32 param, options, sleep, address; - - /* Temporarily disable system sleep */ - address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS; - bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m)); - options = param; - param |= AR6K_OPTION_SLEEP_DISABLE; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS; - bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m)); - sleep = param; - param |= WLAN_SYSTEM_SLEEP_DISABLE_SET(1); - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("old options: %d, old sleep: %d\n", options, sleep)); - - if (ar->arTargetType == TARGET_TYPE_AR6003) { - /* Program analog PLL register */ - bmifn(BMIWriteSOCRegister(ar->arHifDevice, ANALOG_INTF_BASE_ADDRESS + 0x284, 0xF9104001)); - /* Run at 80/88MHz by default */ - param = CPU_CLOCK_STANDARD_SET(1); - } else { - /* Run at 40/44MHz by default */ - param = CPU_CLOCK_STANDARD_SET(0); - } - address = RTC_BASE_ADDRESS + CPU_CLOCK_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - param = 0; - if (ar->arTargetType == TARGET_TYPE_AR6002) { - bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (u8 *)¶m, 4)); - } - - /* LPO_CAL.ENABLE = 1 if no external clk is detected */ - if (param != 1) { - address = RTC_BASE_ADDRESS + LPO_CAL_ADDRESS; - param = LPO_CAL_ENABLE_SET(1); - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - } - - /* Venus2.0: Lower SDIO pad drive strength, - * temporary WAR to avoid SDIO CRC error */ - if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("AR6K: Temporary WAR to avoid SDIO CRC error\n")); - param = 0x20; - address = GPIO_BASE_ADDRESS + GPIO_PIN10_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - address = GPIO_BASE_ADDRESS + GPIO_PIN11_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - address = GPIO_BASE_ADDRESS + GPIO_PIN12_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - address = GPIO_BASE_ADDRESS + GPIO_PIN13_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - } - -#ifdef FORCE_INTERNAL_CLOCK - /* Ignore external clock, if any, and force use of internal clock */ - if (ar->arTargetType == TARGET_TYPE_AR6003) { - /* hi_ext_clk_detected = 0 */ - param = 0; - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (u8 *)¶m, 4)); - - /* CLOCK_CONTROL &= ~LF_CLK32 */ - address = RTC_BASE_ADDRESS + CLOCK_CONTROL_ADDRESS; - bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m)); - param &= (~CLOCK_CONTROL_LF_CLK32_SET(1)); - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - } -#endif /* FORCE_INTERNAL_CLOCK */ - - /* Transfer Board Data from Target EEPROM to Target RAM */ - if (ar->arTargetType == TARGET_TYPE_AR6003) { - /* Determine where in Target RAM to write Board Data */ - bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (u8 *)&address, 4)); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board Data download address: 0x%x\n", address)); - - /* Write EEPROM data to Target RAM */ - if ((ar6000_transfer_bin_file(ar, AR6K_BOARD_DATA_FILE, address, false)) != 0) { - return A_ERROR; - } - - /* Record the fact that Board Data IS initialized */ - param = 1; - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data_initialized), (u8 *)¶m, 4)); - - /* Transfer One time Programmable data */ - AR6K_APP_LOAD_ADDRESS(address, ar->arVersion.target_ver); - if (ar->arVersion.target_ver == AR6003_REV3_VERSION) - address = 0x1234; - status = ar6000_transfer_bin_file(ar, AR6K_OTP_FILE, address, true); - if (status == 0) { - /* Execute the OTP code */ - param = 0; - AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver); - bmifn(BMIExecute(ar->arHifDevice, address, ¶m)); - } else if (status != A_ENOENT) { - return A_ERROR; - } - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Programming of board data for chip %d not supported\n", ar->arTargetType)); - return A_ERROR; - } - - /* Download Target firmware */ - AR6K_APP_LOAD_ADDRESS(address, ar->arVersion.target_ver); - if (ar->arVersion.target_ver == AR6003_REV3_VERSION) - address = 0x1234; - if ((ar6000_transfer_bin_file(ar, AR6K_FIRMWARE_FILE, address, true)) != 0) { - return A_ERROR; - } - - /* Set starting address for firmware */ - AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver); - bmifn(BMISetAppStart(ar->arHifDevice, address)); - - if(ar->arTargetType == TARGET_TYPE_AR6003) { - AR6K_DATASET_PATCH_ADDRESS(address, ar->arVersion.target_ver); - if ((ar6000_transfer_bin_file(ar, AR6K_PATCH_FILE, - address, false)) != 0) - return A_ERROR; - param = address; - bmifn(BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_dset_list_head), - (unsigned char *)¶m, 4)); - } - - /* Restore system sleep */ - address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, sleep)); - - address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS; - param = options | 0x20; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - if (ar->arTargetType == TARGET_TYPE_AR6003) { - /* Configure GPIO AR6003 UART */ -#ifndef CONFIG_AR600x_DEBUG_UART_TX_PIN -#define CONFIG_AR600x_DEBUG_UART_TX_PIN 8 -#endif - param = CONFIG_AR600x_DEBUG_UART_TX_PIN; - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbg_uart_txpin), (u8 *)¶m, 4)); - -#if (CONFIG_AR600x_DEBUG_UART_TX_PIN == 23) - { - address = GPIO_BASE_ADDRESS + CLOCK_GPIO_ADDRESS; - bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m)); - param |= CLOCK_GPIO_BT_CLK_OUT_EN_SET(1); - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - } -#endif - - /* Configure GPIO for BT Reset */ -#ifdef ATH6KL_CONFIG_GPIO_BT_RESET -#define CONFIG_AR600x_BT_RESET_PIN 0x16 - param = CONFIG_AR600x_BT_RESET_PIN; - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_support_pins), (u8 *)¶m, 4)); -#endif /* ATH6KL_CONFIG_GPIO_BT_RESET */ - - /* Configure UART flow control polarity */ -#ifndef CONFIG_ATH6KL_BT_UART_FC_POLARITY -#define CONFIG_ATH6KL_BT_UART_FC_POLARITY 0 -#endif - -#if (CONFIG_ATH6KL_BT_UART_FC_POLARITY == 1) - if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - param = ((CONFIG_ATH6KL_BT_UART_FC_POLARITY << 1) & 0x2); - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_pwr_mgmt_params), (u8 *)¶m, 4)); - } -#endif /* CONFIG_ATH6KL_BT_UART_FC_POLARITY */ - } - -#ifdef HTC_RAW_INTERFACE - if (!eppingtest && bypasswmi) { - /* Don't run BMIDone for ART mode and force resetok=0 */ - resetok = 0; - msleep(1000); - } -#endif /* HTC_RAW_INTERFACE */ - } - - return 0; -} - -int -ar6000_configure_target(struct ar6_softc *ar) -{ - u32 param; - if (enableuartprint) { - param = 1; - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enableuartprint failed \n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Serial console prints enabled\n")); - } - - /* Tell target which HTC version it is used*/ - param = HTC_PROTOCOL_VERSION; - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for htc version failed \n")); - return A_ERROR; - } - -#ifdef CONFIG_HOST_TCMD_SUPPORT - if(testmode) { - ar->arTargetMode = AR6000_TCMD_MODE; - }else { - ar->arTargetMode = AR6000_WLAN_MODE; - } -#endif - if (enabletimerwar) { - u32 param; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for enabletimerwar failed \n")); - return A_ERROR; - } - - param |= HI_OPTION_TIMER_WAR; - - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enabletimerwar failed \n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Timer WAR enabled\n")); - } - - /* set the firmware mode to STA/IBSS/AP */ - { - u32 param; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for setting fwmode failed \n")); - return A_ERROR; - } - - param |= (num_device << HI_OPTION_NUM_DEV_SHIFT); - param |= (fwmode << HI_OPTION_FW_MODE_SHIFT); - param |= (mac_addr_method << HI_OPTION_MAC_ADDR_METHOD_SHIFT); - param |= (firmware_bridge << HI_OPTION_FW_BRIDGE_SHIFT); - - - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for setting fwmode failed \n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n")); - } - -#ifdef ATH6KL_DISABLE_TARGET_DBGLOGS - { - u32 param; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for disabling debug logs failed\n")); - return A_ERROR; - } - - param |= HI_OPTION_DISABLE_DBGLOG; - - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for HI_OPTION_DISABLE_DBGLOG\n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n")); - } -#endif /* ATH6KL_DISABLE_TARGET_DBGLOGS */ - - /* - * Hardcode the address use for the extended board data - * Ideally this should be pre-allocate by the OS at boot time - * But since it is a new feature and board data is loaded - * at init time, we have to workaround this from host. - * It is difficult to patch the firmware boot code, - * but possible in theory. - */ - - if (ar->arTargetType == TARGET_TYPE_AR6003) { - u32 ramReservedSz; - if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - param = AR6003_REV2_BOARD_EXT_DATA_ADDRESS; - ramReservedSz = AR6003_REV2_RAM_RESERVE_SIZE; - } else { - param = AR6003_REV3_BOARD_EXT_DATA_ADDRESS; - ramReservedSz = AR6003_REV3_RAM_RESERVE_SIZE; - } - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data), - (u8 *)¶m, 4) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("BMIWriteMemory for " - "hi_board_ext_data failed\n")); - return A_ERROR; - } - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, - hi_end_RAM_reserve_sz), - (u8 *)&ramReservedSz, 4) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR , - ("BMIWriteMemory for " - "hi_end_RAM_reserve_sz failed\n")); - return A_ERROR; - } - } - - /* since BMIInit is called in the driver layer, we have to set the block - * size here for the target */ - - if (ar6000_set_htc_params(ar->arHifDevice, ar->arTargetType, - mbox_yield_limit, 0)) { - /* use default number of control buffers */ - return A_ERROR; - } - - if (setupbtdev != 0) { - if (ar6000_set_hci_bridge_flags(ar->arHifDevice, - ar->arTargetType, - setupbtdev)) { - return A_ERROR; - } - } - return 0; -} - -static void -init_netdev(struct net_device *dev, char *name) -{ - dev->netdev_ops = &ar6000_netdev_ops; - dev->watchdog_timeo = AR6000_TX_TIMEOUT; - - /* - * We need the OS to provide us with more headroom in order to - * perform dix to 802.3, WMI header encap, and the HTC header - */ - if (processDot11Hdr) { - dev->hard_header_len = sizeof(struct ieee80211_qosframe) + sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN + WMI_MAX_TX_META_SZ + LINUX_HACK_FUDGE_FACTOR; - } else { - dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) + - sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN + WMI_MAX_TX_META_SZ + LINUX_HACK_FUDGE_FACTOR; - } - - if (name[0]) - { - strcpy(dev->name, name); - } - -#ifdef CONFIG_CHECKSUM_OFFLOAD - if(csumOffload){ - dev->features |= NETIF_F_IP_CSUM; /*advertise kernel capability to do TCP/UDP CSUM offload for IPV4*/ - } -#endif - - return; -} - -static int __ath6kl_init_netdev(struct net_device *dev) -{ - int r; - - rtnl_lock(); - r = ar6000_init(dev); - rtnl_unlock(); - - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_init\n")); - return r; - } - - return 0; -} - -#ifdef HTC_RAW_INTERFACE -static int ath6kl_init_netdev_wmi(struct net_device *dev) -{ - if (!eppingtest && bypasswmi) - return 0; - - return __ath6kl_init_netdev(dev); -} -#else -static int ath6kl_init_netdev_wmi(struct net_device *dev) -{ - return __ath6kl_init_netdev(dev); -} -#endif - -static int ath6kl_init_netdev(struct ar6_softc *ar) -{ - int r; - - r = ar6000_sysfs_bmi_get_config(ar, wlaninitmode); - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("ar6000_avail: " - "ar6000_sysfs_bmi_get_config failed\n")); - return r; - } - - return ath6kl_init_netdev_wmi(ar->arNetDev); -} - -/* - * HTC Event handlers - */ -static int -ar6000_avail_ev(void *context, void *hif_handle) -{ - int i; - struct net_device *dev; - void *ar_netif; - struct ar6_softc *ar; - int device_index = 0; - struct htc_init_info htcInfo; - struct wireless_dev *wdev; - int r = 0; - struct hif_device_os_device_info osDevInfo; - - memset(&osDevInfo, 0, sizeof(osDevInfo)); - if (HIFConfigureDevice(hif_handle, HIF_DEVICE_GET_OS_DEVICE, - &osDevInfo, sizeof(osDevInfo))) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s: Failed to get OS device instance\n", __func__)); - return A_ERROR; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_available\n")); - - for (i=0; i < MAX_AR6000; i++) { - if (ar6000_devices[i] == NULL) { - break; - } - } - - if (i == MAX_AR6000) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_available: max devices reached\n")); - return A_ERROR; - } - - /* Save this. It gives a bit better readability especially since */ - /* we use another local "i" variable below. */ - device_index = i; - - wdev = ar6k_cfg80211_init(osDevInfo.pOSDevice); - if (IS_ERR(wdev)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: ar6k_cfg80211_init failed\n", __func__)); - return A_ERROR; - } - ar_netif = wdev_priv(wdev); - - if (ar_netif == NULL) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Can't allocate ar6k priv memory\n", __func__)); - return A_ERROR; - } - - A_MEMZERO(ar_netif, sizeof(struct ar6_softc)); - ar = (struct ar6_softc *)ar_netif; - - ar->wdev = wdev; - wdev->iftype = NL80211_IFTYPE_STATION; - - dev = alloc_netdev_mq(0, "wlan%d", ether_setup, 1); - if (!dev) { - printk(KERN_CRIT "AR6K: no memory for network device instance\n"); - ar6k_cfg80211_deinit(ar); - return A_ERROR; - } - - dev->ieee80211_ptr = wdev; - SET_NETDEV_DEV(dev, wiphy_dev(wdev->wiphy)); - wdev->netdev = dev; - ar->arNetworkType = INFRA_NETWORK; - ar->smeState = SME_DISCONNECTED; - ar->arAutoAuthStage = AUTH_IDLE; - - init_netdev(dev, ifname); - - - ar->arNetDev = dev; - ar->arHifDevice = hif_handle; - ar->arWlanState = WLAN_ENABLED; - ar->arDeviceIndex = device_index; - - ar->arWlanPowerState = WLAN_POWER_STATE_ON; - ar->arWlanOff = false; /* We are in ON state */ -#ifdef CONFIG_PM - ar->arWowState = WLAN_WOW_STATE_NONE; - ar->arBTOff = true; /* BT chip assumed to be OFF */ - ar->arBTSharing = WLAN_CONFIG_BT_SHARING; - ar->arWlanOffConfig = WLAN_CONFIG_WLAN_OFF; - ar->arSuspendConfig = WLAN_CONFIG_PM_SUSPEND; - ar->arWow2Config = WLAN_CONFIG_PM_WOW2; -#endif /* CONFIG_PM */ - - A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev); - ar->arHBChallengeResp.seqNum = 0; - ar->arHBChallengeResp.outstanding = false; - ar->arHBChallengeResp.missCnt = 0; - ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT; - ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT; - - ar6000_init_control_info(ar); - init_waitqueue_head(&arEvent); - sema_init(&ar->arSem, 1); - ar->bIsDestroyProgress = false; - - INIT_HTC_PACKET_QUEUE(&ar->amsdu_rx_buffer_queue); - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - - A_INIT_TIMER(&ar->disconnect_timer, disconnect_timer_handler, dev); - - BMIInit(); - - ar6000_sysfs_bmi_init(ar); - - { - struct bmi_target_info targ_info; - - r = BMIGetTargetInfo(ar->arHifDevice, &targ_info); - if (r) - goto avail_ev_failed; - - ar->arVersion.target_ver = targ_info.target_ver; - ar->arTargetType = targ_info.target_type; - wdev->wiphy->hw_version = targ_info.target_ver; - } - - r = ar6000_configure_target(ar); - if (r) - goto avail_ev_failed; - - A_MEMZERO(&htcInfo,sizeof(htcInfo)); - htcInfo.pContext = ar; - htcInfo.TargetFailure = ar6000_target_failure; - - ar->arHtcTarget = HTCCreate(ar->arHifDevice,&htcInfo); - - if (!ar->arHtcTarget) { - r = -ENOMEM; - goto avail_ev_failed; - } - - spin_lock_init(&ar->arLock); - -#ifdef WAPI_ENABLE - ar->arWapiEnable = 0; -#endif - - - if(csumOffload){ - /*if external frame work is also needed, change and use an extended rxMetaVerion*/ - ar->rxMetaVersion=WMI_META_VERSION_2; - } - - ar->aggr_cntxt = aggr_init(ar6000_alloc_netbufs); - if (!ar->aggr_cntxt) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Failed to initialize aggr.\n", __func__)); - r = -ENOMEM; - goto avail_ev_failed; - } - - aggr_register_rx_dispatcher(ar->aggr_cntxt, (void *)dev, ar6000_deliver_frames_to_nw_stack); - - HIFClaimDevice(ar->arHifDevice, ar); - - /* We only register the device in the global list if we succeed. */ - /* If the device is in the global list, it will be destroyed */ - /* when the module is unloaded. */ - ar6000_devices[device_index] = dev; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("BMI enabled: %d\n", wlaninitmode)); - if ((wlaninitmode == WLAN_INIT_MODE_UDEV) || - (wlaninitmode == WLAN_INIT_MODE_DRV)) { - r = ath6kl_init_netdev(ar); - if (r) - goto avail_ev_failed; - } - - /* This runs the init function if registered */ - r = register_netdev(dev); - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: register_netdev failed\n")); - ar6000_destroy(dev, 0); - return r; - } - - is_netdev_registered = 1; - -#ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT - arApNetDev = NULL; -#endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_avail: name=%s hifdevice=0x%lx, dev=0x%lx (%d), ar=0x%lx\n", - dev->name, (unsigned long)ar->arHifDevice, (unsigned long)dev, device_index, - (unsigned long)ar)); - -avail_ev_failed : - if (r) - ar6000_sysfs_bmi_deinit(ar); - - return r; -} - -static void ar6000_target_failure(void *Instance, int Status) -{ - struct ar6_softc *ar = (struct ar6_softc *)Instance; - WMI_TARGET_ERROR_REPORT_EVENT errEvent; - static bool sip = false; - - if (Status != 0) { - - printk(KERN_ERR "ar6000_target_failure: target asserted \n"); - - if (timer_pending(&ar->arHBChallengeResp.timer)) { - A_UNTIMEOUT(&ar->arHBChallengeResp.timer); - } - - /* try dumping target assertion information (if any) */ - ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType); - - /* - * Fetch the logs from the target via the diagnostic - * window. - */ - ar6000_dbglog_get_debug_logs(ar); - - /* Report the error only once */ - if (!sip) { - sip = true; - errEvent.errorVal = WMI_TARGET_COM_ERR | - WMI_TARGET_FATAL_ERR; - } - } -} - -static int -ar6000_unavail_ev(void *context, void *hif_handle) -{ - struct ar6_softc *ar = (struct ar6_softc *)context; - /* NULL out it's entry in the global list */ - ar6000_devices[ar->arDeviceIndex] = NULL; - ar6000_destroy(ar->arNetDev, 1); - - return 0; -} - -void -ar6000_restart_endpoint(struct net_device *dev) -{ - int status = 0; - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - BMIInit(); - do { - if ( (status=ar6000_configure_target(ar))!= 0) - break; - if ( (status=ar6000_sysfs_bmi_get_config(ar, wlaninitmode)) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_sysfs_bmi_get_config failed\n")); - break; - } - rtnl_lock(); - status = (ar6000_init(dev)==0) ? 0 : A_ERROR; - rtnl_unlock(); - - if (status) { - break; - } - if (ar->arSsidLen && ar->arWlanState == WLAN_ENABLED) { - ar6000_connect_to_ap(ar); - } - } while (0); - - if (status== 0) { - return; - } - - ar6000_devices[ar->arDeviceIndex] = NULL; - ar6000_destroy(ar->arNetDev, 1); -} - -void -ar6000_stop_endpoint(struct net_device *dev, bool keepprofile, bool getdbglogs) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - /* Stop the transmit queues */ - netif_stop_queue(dev); - - /* Disable the target and the interrupts associated with it */ - if (ar->arWmiReady == true) - { - if (!bypasswmi) - { - bool disconnectIssued; - - disconnectIssued = (ar->arConnected) || (ar->arConnectPending); - ar6000_disconnect(ar); - if (!keepprofile) { - ar6000_init_profile_info(ar); - } - - A_UNTIMEOUT(&ar->disconnect_timer); - - if (getdbglogs) { - ar6000_dbglog_get_debug_logs(ar); - } - - ar->arWmiReady = false; - wmi_shutdown(ar->arWmi); - ar->arWmiEnabled = false; - ar->arWmi = NULL; - /* - * After wmi_shudown all WMI events will be dropped. - * We need to cleanup the buffers allocated in AP mode - * and give disconnect notification to stack, which usually - * happens in the disconnect_event. - * Simulate the disconnect_event by calling the function directly. - * Sometimes disconnect_event will be received when the debug logs - * are collected. - */ - if (disconnectIssued) { - if(ar->arNetworkType & AP_NETWORK) { - ar6000_disconnect_event(ar, DISCONNECT_CMD, bcast_mac, 0, NULL, 0); - } else { - ar6000_disconnect_event(ar, DISCONNECT_CMD, ar->arBssid, 0, NULL, 0); - } - } - ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; - ar->user_key_ctrl = 0; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): WMI stopped\n", __func__)); - } - else - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): WMI not ready 0x%lx 0x%lx\n", - __func__, (unsigned long) ar, (unsigned long) ar->arWmi)); - - /* Shut down WMI if we have started it */ - if(ar->arWmiEnabled == true) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): Shut down WMI\n", __func__)); - wmi_shutdown(ar->arWmi); - ar->arWmiEnabled = false; - ar->arWmi = NULL; - } - } - - if (ar->arHtcTarget != NULL) { -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - if (NULL != ar6kHciTransCallbacks.cleanupTransport) { - ar6kHciTransCallbacks.cleanupTransport(NULL); - } -#else - // FIXME: workaround to reset BT's UART baud rate to default - if (NULL != ar->exitCallback) { - struct ar3k_config_info ar3kconfig; - int status; - - A_MEMZERO(&ar3kconfig,sizeof(ar3kconfig)); - ar6000_set_default_ar3kconfig(ar, (void *)&ar3kconfig); - status = ar->exitCallback(&ar3kconfig); - if (0 != status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to reset AR3K baud rate! \n")); - } - } - // END workaround - if (setuphci) - ar6000_cleanup_hci(ar); -#endif - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Shutting down HTC .... \n")); - /* stop HTC */ - HTCStop(ar->arHtcTarget); - } - - if (resetok) { - /* try to reset the device if we can - * The driver may have been configure NOT to reset the target during - * a debug session */ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Attempting to reset target on instance destroy.... \n")); - if (ar->arHifDevice != NULL) { - bool coldReset = (ar->arTargetType == TARGET_TYPE_AR6003) ? true: false; - ar6000_reset_device(ar->arHifDevice, ar->arTargetType, true, coldReset); - } - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Host does not want target reset. \n")); - } - /* Done with cookies */ - ar6000_cookie_cleanup(ar); - - /* cleanup any allocated AMSDU buffers */ - ar6000_cleanup_amsdu_rxbufs(ar); -} -/* - * We need to differentiate between the surprise and planned removal of the - * device because of the following consideration: - * - In case of surprise removal, the hcd already frees up the pending - * for the device and hence there is no need to unregister the function - * driver inorder to get these requests. For planned removal, the function - * driver has to explicitly unregister itself to have the hcd return all the - * pending requests before the data structures for the devices are freed up. - * Note that as per the current implementation, the function driver will - * end up releasing all the devices since there is no API to selectively - * release a particular device. - * - Certain commands issued to the target can be skipped for surprise - * removal since they will anyway not go through. - */ -void -ar6000_destroy(struct net_device *dev, unsigned int unregister) -{ - struct ar6_softc *ar; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("+ar6000_destroy \n")); - - if((dev == NULL) || ((ar = ar6k_priv(dev)) == NULL)) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s(): Failed to get device structure.\n", __func__)); - return; - } - - ar->bIsDestroyProgress = true; - - if (down_interruptible(&ar->arSem)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s(): down_interruptible failed \n", __func__)); - return; - } - - if (ar->arWlanPowerState != WLAN_POWER_STATE_CUT_PWR) { - /* only stop endpoint if we are not stop it in suspend_ev */ - ar6000_stop_endpoint(dev, false, true); - } - - ar->arWlanState = WLAN_DISABLED; - if (ar->arHtcTarget != NULL) { - /* destroy HTC */ - HTCDestroy(ar->arHtcTarget); - } - if (ar->arHifDevice != NULL) { - /*release the device so we do not get called back on remove incase we - * we're explicity destroyed by module unload */ - HIFReleaseDevice(ar->arHifDevice); - HIFShutDownDevice(ar->arHifDevice); - } - aggr_module_destroy(ar->aggr_cntxt); - - /* Done with cookies */ - ar6000_cookie_cleanup(ar); - - /* cleanup any allocated AMSDU buffers */ - ar6000_cleanup_amsdu_rxbufs(ar); - - ar6000_sysfs_bmi_deinit(ar); - - /* Cleanup BMI */ - BMICleanup(); - - /* Clear the tx counters */ - memset(tx_attempt, 0, sizeof(tx_attempt)); - memset(tx_post, 0, sizeof(tx_post)); - memset(tx_complete, 0, sizeof(tx_complete)); - -#ifdef HTC_RAW_INTERFACE - if (ar->arRawHtc) { - kfree(ar->arRawHtc); - ar->arRawHtc = NULL; - } -#endif - /* Free up the device data structure */ - if (unregister && is_netdev_registered) { - unregister_netdev(dev); - is_netdev_registered = 0; - } - free_netdev(dev); - - ar6k_cfg80211_deinit(ar); - -#ifdef CONFIG_AP_VIRTUL_ADAPTER_SUPPORT - ar6000_remove_ap_interface(); -#endif /*CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - - kfree(ar->fw_otp); - kfree(ar->fw); - kfree(ar->fw_patch); - kfree(ar->fw_data); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("-ar6000_destroy \n")); -} - -static void disconnect_timer_handler(unsigned long ptr) -{ - struct net_device *dev = (struct net_device *)ptr; - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - A_UNTIMEOUT(&ar->disconnect_timer); - - ar6000_init_profile_info(ar); - ar6000_disconnect(ar); -} - -static void ar6000_detect_error(unsigned long ptr) -{ - struct net_device *dev = (struct net_device *)ptr; - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - WMI_TARGET_ERROR_REPORT_EVENT errEvent; - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - if (ar->arHBChallengeResp.outstanding) { - ar->arHBChallengeResp.missCnt++; - } else { - ar->arHBChallengeResp.missCnt = 0; - } - - if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) { - /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */ - ar->arHBChallengeResp.missCnt = 0; - ar->arHBChallengeResp.seqNum = 0; - errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR; - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - return; - } - - /* Generate the sequence number for the next challenge */ - ar->arHBChallengeResp.seqNum++; - ar->arHBChallengeResp.outstanding = true; - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - /* Send the challenge on the control channel */ - if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to send heart beat challenge\n")); - } - - - /* Reschedule the timer for the next challenge */ - A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0); -} - -void ar6000_init_profile_info(struct ar6_softc *ar) -{ - ar->arSsidLen = 0; - A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); - - switch(fwmode) { - case HI_OPTION_FW_MODE_IBSS: - ar->arNetworkType = ar->arNextMode = ADHOC_NETWORK; - break; - case HI_OPTION_FW_MODE_BSS_STA: - ar->arNetworkType = ar->arNextMode = INFRA_NETWORK; - break; - case HI_OPTION_FW_MODE_AP: - ar->arNetworkType = ar->arNextMode = AP_NETWORK; - break; - } - - ar->arDot11AuthMode = OPEN_AUTH; - ar->arAuthMode = NONE_AUTH; - ar->arPairwiseCrypto = NONE_CRYPT; - ar->arPairwiseCryptoLen = 0; - ar->arGroupCrypto = NONE_CRYPT; - ar->arGroupCryptoLen = 0; - A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList)); - A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); - A_MEMZERO(ar->arBssid, sizeof(ar->arBssid)); - ar->arBssChannel = 0; -} - -static void -ar6000_init_control_info(struct ar6_softc *ar) -{ - ar->arWmiEnabled = false; - ar6000_init_profile_info(ar); - ar->arDefTxKeyIndex = 0; - A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList)); - ar->arChannelHint = 0; - ar->arListenIntervalT = A_DEFAULT_LISTEN_INTERVAL; - ar->arListenIntervalB = 0; - ar->arVersion.host_ver = AR6K_SW_VERSION; - ar->arRssi = 0; - ar->arTxPwr = 0; - ar->arTxPwrSet = false; - ar->arSkipScan = 0; - ar->arBeaconInterval = 0; - ar->arBitRate = 0; - ar->arMaxRetries = 0; - ar->arWmmEnabled = true; - ar->intra_bss = 1; - ar->scan_triggered = 0; - A_MEMZERO(&ar->scParams, sizeof(ar->scParams)); - ar->scParams.shortScanRatio = WMI_SHORTSCANRATIO_DEFAULT; - ar->scParams.scanCtrlFlags = DEFAULT_SCAN_CTRL_FLAGS; - - /* Initialize the AP mode state info */ - { - u8 ctr; - A_MEMZERO((u8 *)ar->sta_list, AP_MAX_NUM_STA * sizeof(sta_t)); - - /* init the Mutexes */ - A_MUTEX_INIT(&ar->mcastpsqLock); - - /* Init the PS queues */ - for (ctr=0; ctr < AP_MAX_NUM_STA ; ctr++) { - A_MUTEX_INIT(&ar->sta_list[ctr].psqLock); - A_NETBUF_QUEUE_INIT(&ar->sta_list[ctr].psq); - } - - ar->ap_profile_flag = 0; - A_NETBUF_QUEUE_INIT(&ar->mcastpsq); - - memcpy(ar->ap_country_code, DEF_AP_COUNTRY_CODE, 3); - ar->ap_wmode = DEF_AP_WMODE_G; - ar->ap_dtim_period = DEF_AP_DTIM; - ar->ap_beacon_interval = DEF_BEACON_INTERVAL; - } -} - -static int -ar6000_open(struct net_device *dev) -{ - unsigned long flags; - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - spin_lock_irqsave(&ar->arLock, flags); - - if(ar->arWlanState == WLAN_DISABLED) { - ar->arWlanState = WLAN_ENABLED; - } - - if( ar->arConnected || bypasswmi) { - netif_carrier_on(dev); - /* Wake up the queues */ - netif_wake_queue(dev); - } - else - netif_carrier_off(dev); - - spin_unlock_irqrestore(&ar->arLock, flags); - return 0; -} - -static int -ar6000_close(struct net_device *dev) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - netif_stop_queue(dev); - - ar6000_disconnect(ar); - - if(ar->arWmiReady == true) { - if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, - 0, 0, 0, 0, 0, 0, 0, 0) != 0) { - return -EIO; - } - ar->arWlanState = WLAN_DISABLED; - } - ar6k_cfg80211_scanComplete_event(ar, A_ECANCELED); - - return 0; -} - -/* connect to a service */ -static int ar6000_connectservice(struct ar6_softc *ar, - struct htc_service_connect_req *pConnect, - char *pDesc) -{ - int status; - struct htc_service_connect_resp response; - - do { - - A_MEMZERO(&response,sizeof(response)); - - status = HTCConnectService(ar->arHtcTarget, - pConnect, - &response); - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" Failed to connect to %s service status:%d \n", - pDesc, status)); - break; - } - switch (pConnect->ServiceID) { - case WMI_CONTROL_SVC : - if (ar->arWmiEnabled) { - /* set control endpoint for WMI use */ - wmi_set_control_ep(ar->arWmi, response.Endpoint); - } - /* save EP for fast lookup */ - ar->arControlEp = response.Endpoint; - break; - case WMI_DATA_BE_SVC : - arSetAc2EndpointIDMap(ar, WMM_AC_BE, response.Endpoint); - break; - case WMI_DATA_BK_SVC : - arSetAc2EndpointIDMap(ar, WMM_AC_BK, response.Endpoint); - break; - case WMI_DATA_VI_SVC : - arSetAc2EndpointIDMap(ar, WMM_AC_VI, response.Endpoint); - break; - case WMI_DATA_VO_SVC : - arSetAc2EndpointIDMap(ar, WMM_AC_VO, response.Endpoint); - break; - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ServiceID not mapped %d\n", pConnect->ServiceID)); - status = A_EINVAL; - break; - } - - } while (false); - - return status; -} - -void ar6000_TxDataCleanup(struct ar6_softc *ar) -{ - /* flush all the data (non-control) streams - * we only flush packets that are tagged as data, we leave any control packets that - * were in the TX queues alone */ - HTCFlushEndpoint(ar->arHtcTarget, - arAc2EndpointID(ar, WMM_AC_BE), - AR6K_DATA_PKT_TAG); - HTCFlushEndpoint(ar->arHtcTarget, - arAc2EndpointID(ar, WMM_AC_BK), - AR6K_DATA_PKT_TAG); - HTCFlushEndpoint(ar->arHtcTarget, - arAc2EndpointID(ar, WMM_AC_VI), - AR6K_DATA_PKT_TAG); - HTCFlushEndpoint(ar->arHtcTarget, - arAc2EndpointID(ar, WMM_AC_VO), - AR6K_DATA_PKT_TAG); -} - -HTC_ENDPOINT_ID -ar6000_ac2_endpoint_id ( void * devt, u8 ac) -{ - struct ar6_softc *ar = (struct ar6_softc *) devt; - return(arAc2EndpointID(ar, ac)); -} - -u8 ar6000_endpoint_id2_ac(void * devt, HTC_ENDPOINT_ID ep ) -{ - struct ar6_softc *ar = (struct ar6_softc *) devt; - return(arEndpoint2Ac(ar, ep )); -} - -#if defined(CONFIG_ATH6KL_ENABLE_COEXISTENCE) -static int ath6kl_config_btcoex_params(struct ar6_softc *ar) -{ - int r; - WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD sbcb_cmd; - WMI_SET_BTCOEX_FE_ANT_CMD sbfa_cmd; - - /* Configure the type of BT collocated with WLAN */ - memset(&sbcb_cmd, 0, sizeof(WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD)); - sbcb_cmd.btcoexCoLocatedBTdev = ATH6KL_BT_DEV; - - r = wmi_set_btcoex_colocated_bt_dev_cmd(ar->arWmi, &sbcb_cmd); - - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("Unable to set collocated BT type\n")); - return r; - } - - /* Configure the type of BT collocated with WLAN */ - memset(&sbfa_cmd, 0, sizeof(WMI_SET_BTCOEX_FE_ANT_CMD)); - - sbfa_cmd.btcoexFeAntType = ATH6KL_BT_ANTENNA; - - r = wmi_set_btcoex_fe_ant_cmd(ar->arWmi, &sbfa_cmd); - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("Unable to set fornt end antenna configuration\n")); - return r; - } - - return 0; -} -#else -static int ath6kl_config_btcoex_params(struct ar6_softc *ar) -{ - return 0; -} -#endif /* CONFIG_ATH6KL_ENABLE_COEXISTENCE */ - -/* - * This function applies WLAN specific configuration defined in wlan_config.h - */ -int ar6000_target_config_wlan_params(struct ar6_softc *ar) -{ - int status = 0; - -#ifdef CONFIG_HOST_TCMD_SUPPORT - if (ar->arTargetMode != AR6000_WLAN_MODE) { - return 0; - } -#endif /* CONFIG_HOST_TCMD_SUPPORT */ - - /* - * configure the device for rx dot11 header rules 0,0 are the default values - * therefore this command can be skipped if the inputs are 0,FALSE,FALSE.Required - * if checksum offload is needed. Set RxMetaVersion to 2 - */ - if ((wmi_set_rx_frame_format_cmd(ar->arWmi,ar->rxMetaVersion, processDot11Hdr, processDot11Hdr)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the rx frame format.\n")); - status = A_ERROR; - } - - status = ath6kl_config_btcoex_params(ar); - if (status) - return status; - -#if WLAN_CONFIG_IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN - if ((wmi_pmparams_cmd(ar->arWmi, 0, 1, 0, 0, 1, IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set power save fail event policy\n")); - status = A_ERROR; - } -#endif - -#if WLAN_CONFIG_DONOT_IGNORE_BARKER_IN_ERP - if ((wmi_set_lpreamble_cmd(ar->arWmi, 0, WMI_DONOT_IGNORE_BARKER_IN_ERP)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set barker preamble policy\n")); - status = A_ERROR; - } -#endif - - if ((wmi_set_keepalive_cmd(ar->arWmi, WLAN_CONFIG_KEEP_ALIVE_INTERVAL)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set keep alive interval\n")); - status = A_ERROR; - } - -#if WLAN_CONFIG_DISABLE_11N - { - WMI_SET_HT_CAP_CMD htCap; - - memset(&htCap, 0, sizeof(WMI_SET_HT_CAP_CMD)); - htCap.band = 0; - if ((wmi_set_ht_cap_cmd(ar->arWmi, &htCap)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set ht capabilities \n")); - status = A_ERROR; - } - - htCap.band = 1; - if ((wmi_set_ht_cap_cmd(ar->arWmi, &htCap)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set ht capabilities \n")); - status = A_ERROR; - } - } -#endif /* WLAN_CONFIG_DISABLE_11N */ - -#ifdef ATH6K_CONFIG_OTA_MODE - if ((wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set power mode \n")); - status = A_ERROR; - } -#endif - - if ((wmi_disctimeout_cmd(ar->arWmi, WLAN_CONFIG_DISCONNECT_TIMEOUT)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set disconnect timeout \n")); - status = A_ERROR; - } - -#if WLAN_CONFIG_DISABLE_TX_BURSTING - if ((wmi_set_wmm_txop(ar->arWmi, WMI_TXOP_DISABLED)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set txop bursting \n")); - status = A_ERROR; - } -#endif - - return status; -} - -/* This function does one time initialization for the lifetime of the device */ -int ar6000_init(struct net_device *dev) -{ - struct ar6_softc *ar; - int status; - s32 timeleft; - s16 i; - int ret = 0; - - if((ar = ar6k_priv(dev)) == NULL) - { - return -EIO; - } - - if (wlaninitmode == WLAN_INIT_MODE_USR || wlaninitmode == WLAN_INIT_MODE_DRV) { - - ar6000_update_bdaddr(ar); - - if (enablerssicompensation) { - ar6000_copy_cust_data_from_target(ar->arHifDevice, ar->arTargetType); - read_rssi_compensation_param(ar); - for (i=-95; i<=0; i++) { - rssi_compensation_table[0-i] = rssi_compensation_calc(ar,i); - } - } - } - - dev_hold(dev); - rtnl_unlock(); - - /* Do we need to finish the BMI phase */ - if ((wlaninitmode == WLAN_INIT_MODE_USR || wlaninitmode == WLAN_INIT_MODE_DRV) && - (BMIDone(ar->arHifDevice) != 0)) - { - ret = -EIO; - goto ar6000_init_done; - } - - if (!bypasswmi) - { -#if 0 /* TBDXXX */ - if (ar->arVersion.host_ver != ar->arVersion.target_ver) { - A_PRINTF("WARNING: Host version 0x%x does not match Target " - " version 0x%x!\n", - ar->arVersion.host_ver, ar->arVersion.target_ver); - } -#endif - - /* Indicate that WMI is enabled (although not ready yet) */ - ar->arWmiEnabled = true; - if ((ar->arWmi = wmi_init((void *) ar)) == NULL) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Failed to initialize WMI.\n", __func__)); - ret = -EIO; - goto ar6000_init_done; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Got WMI @ 0x%lx.\n", __func__, - (unsigned long) ar->arWmi)); - } - - do { - struct htc_service_connect_req connect; - - /* the reason we have to wait for the target here is that the driver layer - * has to init BMI in order to set the host block size, - */ - status = HTCWaitTarget(ar->arHtcTarget); - - if (status) { - break; - } - - A_MEMZERO(&connect,sizeof(connect)); - /* meta data is unused for now */ - connect.pMetaData = NULL; - connect.MetaDataLength = 0; - /* these fields are the same for all service endpoints */ - connect.EpCallbacks.pContext = ar; - connect.EpCallbacks.EpTxCompleteMultiple = ar6000_tx_complete; - connect.EpCallbacks.EpRecv = ar6000_rx; - connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill; - connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full; - /* set the max queue depth so that our ar6000_tx_queue_full handler gets called. - * Linux has the peculiarity of not providing flow control between the - * NIC and the network stack. There is no API to indicate that a TX packet - * was sent which could provide some back pressure to the network stack. - * Under linux you would have to wait till the network stack consumed all sk_buffs - * before any back-flow kicked in. Which isn't very friendly. - * So we have to manage this ourselves */ - connect.MaxSendQueueDepth = MAX_DEFAULT_SEND_QUEUE_DEPTH; - connect.EpCallbacks.RecvRefillWaterMark = AR6000_MAX_RX_BUFFERS / 4; /* set to 25 % */ - if (0 == connect.EpCallbacks.RecvRefillWaterMark) { - connect.EpCallbacks.RecvRefillWaterMark++; - } - /* connect to control service */ - connect.ServiceID = WMI_CONTROL_SVC; - status = ar6000_connectservice(ar, - &connect, - "WMI CONTROL"); - if (status) { - break; - } - - connect.LocalConnectionFlags |= HTC_LOCAL_CONN_FLAGS_ENABLE_SEND_BUNDLE_PADDING; - /* limit the HTC message size on the send path, although we can receive A-MSDU frames of - * 4K, we will only send ethernet-sized (802.3) frames on the send path. */ - connect.MaxSendMsgSize = WMI_MAX_TX_DATA_FRAME_LENGTH; - - /* to reduce the amount of committed memory for larger A_MSDU frames, use the recv-alloc threshold - * mechanism for larger packets */ - connect.EpCallbacks.RecvAllocThreshold = AR6000_BUFFER_SIZE; - connect.EpCallbacks.EpRecvAllocThresh = ar6000_alloc_amsdu_rxbuf; - - /* for the remaining data services set the connection flag to reduce dribbling, - * if configured to do so */ - if (reduce_credit_dribble) { - connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE; - /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value - * of 0-3 */ - connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK; - connect.ConnectionFlags |= - ((u16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK; - } - /* connect to best-effort service */ - connect.ServiceID = WMI_DATA_BE_SVC; - - status = ar6000_connectservice(ar, - &connect, - "WMI DATA BE"); - if (status) { - break; - } - - /* connect to back-ground - * map this to WMI LOW_PRI */ - connect.ServiceID = WMI_DATA_BK_SVC; - status = ar6000_connectservice(ar, - &connect, - "WMI DATA BK"); - if (status) { - break; - } - - /* connect to Video service, map this to - * to HI PRI */ - connect.ServiceID = WMI_DATA_VI_SVC; - status = ar6000_connectservice(ar, - &connect, - "WMI DATA VI"); - if (status) { - break; - } - - /* connect to VO service, this is currently not - * mapped to a WMI priority stream due to historical reasons. - * WMI originally defined 3 priorities over 3 mailboxes - * We can change this when WMI is reworked so that priorities are not - * dependent on mailboxes */ - connect.ServiceID = WMI_DATA_VO_SVC; - status = ar6000_connectservice(ar, - &connect, - "WMI DATA VO"); - if (status) { - break; - } - - A_ASSERT(arAc2EndpointID(ar,WMM_AC_BE) != 0); - A_ASSERT(arAc2EndpointID(ar,WMM_AC_BK) != 0); - A_ASSERT(arAc2EndpointID(ar,WMM_AC_VI) != 0); - A_ASSERT(arAc2EndpointID(ar,WMM_AC_VO) != 0); - - /* setup access class priority mappings */ - ar->arAcStreamPriMap[WMM_AC_BK] = 0; /* lowest */ - ar->arAcStreamPriMap[WMM_AC_BE] = 1; /* */ - ar->arAcStreamPriMap[WMM_AC_VI] = 2; /* */ - ar->arAcStreamPriMap[WMM_AC_VO] = 3; /* highest */ - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - if (setuphci && (NULL != ar6kHciTransCallbacks.setupTransport)) { - struct hci_transport_misc_handles hciHandles; - - hciHandles.netDevice = ar->arNetDev; - hciHandles.hifDevice = ar->arHifDevice; - hciHandles.htcHandle = ar->arHtcTarget; - status = (int)(ar6kHciTransCallbacks.setupTransport(&hciHandles)); - } -#else - if (setuphci) { - /* setup HCI */ - status = ar6000_setup_hci(ar); - } -#endif - - } while (false); - - if (status) { - ret = -EIO; - goto ar6000_init_done; - } - - if (regscanmode) { - u32 param; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, - hi_option_flag), - (u8 *)¶m, - 4) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("BMIReadMemory forsetting " - "regscanmode failed\n")); - return A_ERROR; - } - - if (regscanmode == 1) - param |= HI_OPTION_SKIP_REG_SCAN; - else if (regscanmode == 2) - param |= HI_OPTION_INIT_REG_SCAN; - - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, - hi_option_flag), - (u8 *)¶m, - 4) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("BMIWriteMemory forsetting " - "regscanmode failed\n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Regulatory scan mode set\n")); - } - - /* - * give our connected endpoints some buffers - */ - - ar6000_rx_refill(ar, ar->arControlEp); - ar6000_rx_refill(ar, arAc2EndpointID(ar,WMM_AC_BE)); - - /* - * We will post the receive buffers only for SPE or endpoint ping testing so we are - * making it conditional on the 'bypasswmi' flag. - */ - if (bypasswmi) { - ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_BK)); - ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_VI)); - ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_VO)); - } - - /* allocate some buffers that handle larger AMSDU frames */ - ar6000_refill_amsdu_rxbufs(ar,AR6000_MAX_AMSDU_RX_BUFFERS); - - /* setup credit distribution */ - ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo); - - /* Since cookies are used for HTC transports, they should be */ - /* initialized prior to enabling HTC. */ - ar6000_cookie_init(ar); - - /* start HTC */ - status = HTCStart(ar->arHtcTarget); - - if (status) { - if (ar->arWmiEnabled == true) { - wmi_shutdown(ar->arWmi); - ar->arWmiEnabled = false; - ar->arWmi = NULL; - } - ar6000_cookie_cleanup(ar); - ret = -EIO; - goto ar6000_init_done; - } - - if (!bypasswmi) { - /* Wait for Wmi event to be ready */ - timeleft = wait_event_interruptible_timeout(arEvent, - (ar->arWmiReady == true), wmitimeout * HZ); - - if (ar->arVersion.abi_ver != AR6K_ABI_VERSION) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ABI Version mismatch: Host(0x%x), Target(0x%x)\n", AR6K_ABI_VERSION, ar->arVersion.abi_ver)); -#ifndef ATH6K_SKIP_ABI_VERSION_CHECK - ret = -EIO; - goto ar6000_init_done; -#endif /* ATH6K_SKIP_ABI_VERSION_CHECK */ - } - - if(!timeleft || signal_pending(current)) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI is not ready or wait was interrupted\n")); - ret = -EIO; - goto ar6000_init_done; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() WMI is ready\n", __func__)); - - /* Communicate the wmi protocol verision to the target */ - if ((ar6000_set_host_app_area(ar)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the host app area\n")); - } - ar6000_target_config_wlan_params(ar); - } - - ar->arNumDataEndPts = 1; - - if (bypasswmi) { - /* for tests like endpoint ping, the MAC address needs to be non-zero otherwise - * the data path through a raw socket is disabled */ - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x01; - dev->dev_addr[2] = 0x02; - dev->dev_addr[3] = 0xAA; - dev->dev_addr[4] = 0xBB; - dev->dev_addr[5] = 0xCC; - } - -ar6000_init_done: - rtnl_lock(); - dev_put(dev); - - return ret; -} - - -void -ar6000_bitrate_rx(void *devt, s32 rateKbps) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - ar->arBitRate = rateKbps; - wake_up(&arEvent); -} - -void -ar6000_ratemask_rx(void *devt, u32 ratemask) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - ar->arRateMask = ratemask; - wake_up(&arEvent); -} - -void -ar6000_txPwr_rx(void *devt, u8 txPwr) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - ar->arTxPwr = txPwr; - wake_up(&arEvent); -} - - -void -ar6000_channelList_rx(void *devt, s8 numChan, u16 *chanList) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - memcpy(ar->arChannelList, chanList, numChan * sizeof (u16)); - ar->arNumChannels = numChan; - - wake_up(&arEvent); -} - -u8 ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, u32 *mapNo) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - u8 *datap; - ATH_MAC_HDR *macHdr; - u32 i, eptMap; - - (*mapNo) = 0; - datap = A_NETBUF_DATA(skb); - macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR)); - if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) { - return ENDPOINT_2; - } - - eptMap = -1; - for (i = 0; i < ar->arNodeNum; i ++) { - if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) { - (*mapNo) = i + 1; - ar->arNodeMap[i].txPending ++; - return ar->arNodeMap[i].epId; - } - - if ((eptMap == -1) && !ar->arNodeMap[i].txPending) { - eptMap = i; - } - } - - if (eptMap == -1) { - eptMap = ar->arNodeNum; - ar->arNodeNum ++; - A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM); - } - - memcpy(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN); - - for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) { - if (!ar->arTxPending[i]) { - ar->arNodeMap[eptMap].epId = i; - break; - } - // No free endpoint is available, start redistribution on the inuse endpoints. - if (i == ENDPOINT_5) { - ar->arNodeMap[eptMap].epId = ar->arNexEpId; - ar->arNexEpId ++; - if (ar->arNexEpId > ENDPOINT_5) { - ar->arNexEpId = ENDPOINT_2; - } - } - } - - (*mapNo) = eptMap + 1; - ar->arNodeMap[eptMap].txPending ++; - - return ar->arNodeMap[eptMap].epId; -} - -#ifdef DEBUG -static void ar6000_dump_skb(struct sk_buff *skb) -{ - u_char *ch; - for (ch = A_NETBUF_DATA(skb); - (unsigned long)ch < ((unsigned long)A_NETBUF_DATA(skb) + - A_NETBUF_LEN(skb)); ch++) - { - AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("%2.2x ", *ch)); - } - AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("\n")); -} -#endif - -#ifdef HTC_TEST_SEND_PKTS -static void DoHTCSendPktsTest(struct ar6_softc *ar, int MapNo, HTC_ENDPOINT_ID eid, struct sk_buff *skb); -#endif - -static int -ar6000_data_tx(struct sk_buff *skb, struct net_device *dev) -{ -#define AC_NOT_MAPPED 99 - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - u8 ac = AC_NOT_MAPPED; - HTC_ENDPOINT_ID eid = ENDPOINT_UNUSED; - u32 mapNo = 0; - int len; - struct ar_cookie *cookie; - bool checkAdHocPsMapping = false,bMoreData = false; - HTC_TX_TAG htc_tag = AR6K_DATA_PKT_TAG; - u8 dot11Hdr = processDot11Hdr; -#ifdef CONFIG_PM - if (ar->arWowState != WLAN_WOW_STATE_NONE) { - A_NETBUF_FREE(skb); - return 0; - } -#endif /* CONFIG_PM */ - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar6000_data_tx start - skb=0x%lx, data=0x%lx, len=0x%x\n", - (unsigned long)skb, (unsigned long)A_NETBUF_DATA(skb), - A_NETBUF_LEN(skb))); - - /* If target is not associated */ - if( (!ar->arConnected && !bypasswmi) -#ifdef CONFIG_HOST_TCMD_SUPPORT - /* TCMD doesn't support any data, free the buf and return */ - || (ar->arTargetMode == AR6000_TCMD_MODE) -#endif - ) { - A_NETBUF_FREE(skb); - return 0; - } - - do { - - if (ar->arWmiReady == false && bypasswmi == 0) { - break; - } - -#ifdef BLOCK_TX_PATH_FLAG - if (blocktx) { - break; - } -#endif /* BLOCK_TX_PATH_FLAG */ - - /* AP mode Power save processing */ - /* If the dst STA is in sleep state, queue the pkt in its PS queue */ - - if (ar->arNetworkType == AP_NETWORK) { - ATH_MAC_HDR *datap = (ATH_MAC_HDR *)A_NETBUF_DATA(skb); - sta_t *conn = NULL; - - /* If the dstMac is a Multicast address & atleast one of the - * associated STA is in PS mode, then queue the pkt to the - * mcastq - */ - if (IEEE80211_IS_MULTICAST(datap->dstMac)) { - u8 ctr=0; - bool qMcast=false; - - - for (ctr=0; ctr<AP_MAX_NUM_STA; ctr++) { - if (STA_IS_PWR_SLEEP((&ar->sta_list[ctr]))) { - qMcast = true; - } - } - if(qMcast) { - - /* If this transmit is not because of a Dtim Expiry q it */ - if (ar->DTIMExpired == false) { - bool isMcastqEmpty = false; - - A_MUTEX_LOCK(&ar->mcastpsqLock); - isMcastqEmpty = A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq); - A_NETBUF_ENQUEUE(&ar->mcastpsq, skb); - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - /* If this is the first Mcast pkt getting queued - * indicate to the target to set the BitmapControl LSB - * of the TIM IE. - */ - if (isMcastqEmpty) { - wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 1); - } - return 0; - } else { - /* This transmit is because of Dtim expiry. Determine if - * MoreData bit has to be set. - */ - A_MUTEX_LOCK(&ar->mcastpsqLock); - if(!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) { - bMoreData = true; - } - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - } - } - } else { - conn = ieee80211_find_conn(ar, datap->dstMac); - if (conn) { - if (STA_IS_PWR_SLEEP(conn)) { - /* If this transmit is not because of a PsPoll q it*/ - if (!STA_IS_PS_POLLED(conn)) { - bool isPsqEmpty = false; - /* Queue the frames if the STA is sleeping */ - A_MUTEX_LOCK(&conn->psqLock); - isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq); - A_NETBUF_ENQUEUE(&conn->psq, skb); - A_MUTEX_UNLOCK(&conn->psqLock); - - /* If this is the first pkt getting queued - * for this STA, update the PVB for this STA - */ - if (isPsqEmpty) { - wmi_set_pvb_cmd(ar->arWmi, conn->aid, 1); - } - - return 0; - } else { - /* This tx is because of a PsPoll. Determine if - * MoreData bit has to be set - */ - A_MUTEX_LOCK(&conn->psqLock); - if (!A_NETBUF_QUEUE_EMPTY(&conn->psq)) { - bMoreData = true; - } - A_MUTEX_UNLOCK(&conn->psqLock); - } - } - } else { - - /* non existent STA. drop the frame */ - A_NETBUF_FREE(skb); - return 0; - } - } - } - - if (ar->arWmiEnabled) { - u8 csumStart=0; - u8 csumDest=0; - u8 csum=skb->ip_summed; - if(csumOffload && (csum==CHECKSUM_PARTIAL)){ - csumStart = (skb->head + skb->csum_start - skb_network_header(skb) + - sizeof(ATH_LLC_SNAP_HDR)); - csumDest=skb->csum_offset+csumStart; - } - if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len - LINUX_HACK_FUDGE_FACTOR) { - struct sk_buff *newbuf; - - /* - * We really should have gotten enough headroom but sometimes - * we still get packets with not enough headroom. Copy the packet. - */ - len = A_NETBUF_LEN(skb); - newbuf = A_NETBUF_ALLOC(len); - if (newbuf == NULL) { - break; - } - A_NETBUF_PUT(newbuf, len); - memcpy(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len); - A_NETBUF_FREE(skb); - skb = newbuf; - /* fall through and assemble header */ - } - - if (dot11Hdr) { - if (wmi_dot11_hdr_add(ar->arWmi,skb,ar->arNetworkType) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx-wmi_dot11_hdr_add failed\n")); - break; - } - } else { - if (wmi_dix_2_dot3(ar->arWmi, skb) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_dix_2_dot3 failed\n")); - break; - } - } - if(csumOffload && (csum ==CHECKSUM_PARTIAL)){ - WMI_TX_META_V2 metaV2; - metaV2.csumStart =csumStart; - metaV2.csumDest = csumDest; - metaV2.csumFlags = 0x1;/*instruct target to calculate checksum*/ - if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE, bMoreData, dot11Hdr, - WMI_META_VERSION_2,&metaV2) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_data_hdr_add failed\n")); - break; - } - - } - else - { - if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE, bMoreData, dot11Hdr,0,NULL) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_data_hdr_add failed\n")); - break; - } - } - - - if ((ar->arNetworkType == ADHOC_NETWORK) && - ar->arIbssPsEnable && ar->arConnected) { - /* flag to check adhoc mapping once we take the lock below: */ - checkAdHocPsMapping = true; - - } else { - /* get the stream mapping */ - ac = wmi_implicit_create_pstream(ar->arWmi, skb, 0, ar->arWmmEnabled); - } - - } else { - EPPING_HEADER *eppingHdr; - - eppingHdr = A_NETBUF_DATA(skb); - - if (IS_EPPING_PACKET(eppingHdr)) { - /* the stream ID is mapped to an access class */ - ac = eppingHdr->StreamNo_h; - /* some EPPING packets cannot be dropped no matter what access class it was - * sent on. We can change the packet tag to guarantee it will not get dropped */ - if (IS_EPING_PACKET_NO_DROP(eppingHdr)) { - htc_tag = AR6K_CONTROL_PKT_TAG; - } - - if (ac == HCI_TRANSPORT_STREAM_NUM) { - /* pass this to HCI */ -#ifndef EXPORT_HCI_BRIDGE_INTERFACE - if (!hci_test_send(ar,skb)) { - return 0; - } -#endif - /* set AC to discard this skb */ - ac = AC_NOT_MAPPED; - } else { - /* a quirk of linux, the payload of the frame is 32-bit aligned and thus the addition - * of the HTC header will mis-align the start of the HTC frame, so we add some - * padding which will be stripped off in the target */ - if (EPPING_ALIGNMENT_PAD > 0) { - A_NETBUF_PUSH(skb, EPPING_ALIGNMENT_PAD); - } - } - - } else { - /* not a ping packet, drop it */ - ac = AC_NOT_MAPPED; - } - } - - } while (false); - - /* did we succeed ? */ - if ((ac == AC_NOT_MAPPED) && !checkAdHocPsMapping) { - /* cleanup and exit */ - A_NETBUF_FREE(skb); - AR6000_STAT_INC(ar, tx_dropped); - AR6000_STAT_INC(ar, tx_aborted_errors); - return 0; - } - - cookie = NULL; - - /* take the lock to protect driver data */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - - do { - - if (checkAdHocPsMapping) { - eid = ar6000_ibss_map_epid(skb, dev, &mapNo); - }else { - eid = arAc2EndpointID (ar, ac); - } - /* validate that the endpoint is connected */ - if (eid == 0 || eid == ENDPOINT_UNUSED ) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" eid %d is NOT mapped!\n", eid)); - break; - } - /* allocate resource for this packet */ - cookie = ar6000_alloc_cookie(ar); - - if (cookie != NULL) { - /* update counts while the lock is held */ - ar->arTxPending[eid]++; - ar->arTotalTxDataPending++; - } - - } while (false); - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (cookie != NULL) { - cookie->arc_bp[0] = (unsigned long)skb; - cookie->arc_bp[1] = mapNo; - SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, - cookie, - A_NETBUF_DATA(skb), - A_NETBUF_LEN(skb), - eid, - htc_tag); - -#ifdef DEBUG - if (debugdriver >= 3) { - ar6000_dump_skb(skb); - } -#endif -#ifdef HTC_TEST_SEND_PKTS - DoHTCSendPktsTest(ar,mapNo,eid,skb); -#endif - /* HTC interface is asynchronous, if this fails, cleanup will happen in - * the ar6000_tx_complete callback */ - HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); - } else { - /* no packet to send, cleanup */ - A_NETBUF_FREE(skb); - AR6000_STAT_INC(ar, tx_dropped); - AR6000_STAT_INC(ar, tx_aborted_errors); - } - - return 0; -} - -int -ar6000_acl_data_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - struct ar_cookie *cookie; - HTC_ENDPOINT_ID eid = ENDPOINT_UNUSED; - - cookie = NULL; - AR6000_SPIN_LOCK(&ar->arLock, 0); - - /* For now we send ACL on BE endpoint: We can also have a dedicated EP */ - eid = arAc2EndpointID (ar, 0); - /* allocate resource for this packet */ - cookie = ar6000_alloc_cookie(ar); - - if (cookie != NULL) { - /* update counts while the lock is held */ - ar->arTxPending[eid]++; - ar->arTotalTxDataPending++; - } - - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (cookie != NULL) { - cookie->arc_bp[0] = (unsigned long)skb; - cookie->arc_bp[1] = 0; - SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, - cookie, - A_NETBUF_DATA(skb), - A_NETBUF_LEN(skb), - eid, - AR6K_DATA_PKT_TAG); - - /* HTC interface is asynchronous, if this fails, cleanup will happen in - * the ar6000_tx_complete callback */ - HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); - } else { - /* no packet to send, cleanup */ - A_NETBUF_FREE(skb); - AR6000_STAT_INC(ar, tx_dropped); - AR6000_STAT_INC(ar, tx_aborted_errors); - } - return 0; -} - - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -static void -tvsub(register struct timeval *out, register struct timeval *in) -{ - if((out->tv_usec -= in->tv_usec) < 0) { - out->tv_sec--; - out->tv_usec += 1000000; - } - out->tv_sec -= in->tv_sec; -} - -void -applyAPTCHeuristics(struct ar6_softc *ar) -{ - u32 duration; - u32 numbytes; - u32 throughput; - struct timeval ts; - int status; - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) { - do_gettimeofday(&ts); - tvsub(&ts, &aptcTR.samplingTS); - duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */ - numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived; - - if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) { - /* Initialize the time stamp and byte count */ - aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0; - do_gettimeofday(&aptcTR.samplingTS); - - /* Calculate and decide based on throughput thresholds */ - throughput = ((numbytes * 8) / duration); - if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) { - /* Disable Sleep and schedule a timer */ - A_ASSERT(ar->arWmiReady == true); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER); - AR6000_SPIN_LOCK(&ar->arLock, 0); - A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0); - aptcTR.timerScheduled = true; - } - } - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); -} -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - -static HTC_SEND_FULL_ACTION ar6000_tx_queue_full(void *Context, struct htc_packet *pPacket) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - HTC_SEND_FULL_ACTION action = HTC_SEND_FULL_KEEP; - bool stopNet = false; - HTC_ENDPOINT_ID Endpoint = HTC_GET_ENDPOINT_FROM_PKT(pPacket); - - do { - - if (bypasswmi) { - int accessClass; - - if (HTC_GET_TAG_FROM_PKT(pPacket) == AR6K_CONTROL_PKT_TAG) { - /* don't drop special control packets */ - break; - } - - accessClass = arEndpoint2Ac(ar,Endpoint); - /* for endpoint ping testing drop Best Effort and Background */ - if ((accessClass == WMM_AC_BE) || (accessClass == WMM_AC_BK)) { - action = HTC_SEND_FULL_DROP; - stopNet = false; - } else { - /* keep but stop the netqueues */ - stopNet = true; - } - break; - } - - if (Endpoint == ar->arControlEp) { - /* under normal WMI if this is getting full, then something is running rampant - * the host should not be exhausting the WMI queue with too many commands - * the only exception to this is during testing using endpointping */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - /* set flag to handle subsequent messages */ - ar->arWMIControlEpFull = true; - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI Control Endpoint is FULL!!! \n")); - /* no need to stop the network */ - stopNet = false; - break; - } - - /* if we get here, we are dealing with data endpoints getting full */ - - if (HTC_GET_TAG_FROM_PKT(pPacket) == AR6K_CONTROL_PKT_TAG) { - /* don't drop control packets issued on ANY data endpoint */ - break; - } - - if (ar->arNetworkType == ADHOC_NETWORK) { - /* in adhoc mode, we cannot differentiate traffic priorities so there is no need to - * continue, however we should stop the network */ - stopNet = true; - break; - } - /* the last MAX_HI_COOKIE_NUM "batch" of cookies are reserved for the highest - * active stream */ - if (ar->arAcStreamPriMap[arEndpoint2Ac(ar,Endpoint)] < ar->arHiAcStreamActivePri && - ar->arCookieCount <= MAX_HI_COOKIE_NUM) { - /* this stream's priority is less than the highest active priority, we - * give preference to the highest priority stream by directing - * HTC to drop the packet that overflowed */ - action = HTC_SEND_FULL_DROP; - /* since we are dropping packets, no need to stop the network */ - stopNet = false; - break; - } - - } while (false); - - if (stopNet) { - AR6000_SPIN_LOCK(&ar->arLock, 0); - ar->arNetQueueStopped = true; - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - /* one of the data endpoints queues is getting full..need to stop network stack - * the queue will resume in ar6000_tx_complete() */ - netif_stop_queue(ar->arNetDev); - } - - return action; -} - - -static void -ar6000_tx_complete(void *Context, struct htc_packet_queue *pPacketQueue) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - u32 mapNo = 0; - int status; - struct ar_cookie * ar_cookie; - HTC_ENDPOINT_ID eid; - bool wakeEvent = false; - struct sk_buff_head skb_queue; - struct htc_packet *pPacket; - struct sk_buff *pktSkb; - bool flushing = false; - - skb_queue_head_init(&skb_queue); - - /* lock the driver as we update internal state */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - - /* reap completed packets */ - while (!HTC_QUEUE_EMPTY(pPacketQueue)) { - - pPacket = HTC_PACKET_DEQUEUE(pPacketQueue); - - ar_cookie = (struct ar_cookie *)pPacket->pPktContext; - A_ASSERT(ar_cookie); - - status = pPacket->Status; - pktSkb = (struct sk_buff *)ar_cookie->arc_bp[0]; - eid = pPacket->Endpoint; - mapNo = ar_cookie->arc_bp[1]; - - A_ASSERT(pktSkb); - A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(pktSkb)); - - /* add this to the list, use faster non-lock API */ - __skb_queue_tail(&skb_queue,pktSkb); - - if (!status) { - A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(pktSkb)); - } - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar6000_tx_complete skb=0x%lx data=0x%lx len=0x%x eid=%d ", - (unsigned long)pktSkb, (unsigned long)pPacket->pBuffer, - pPacket->ActualLength, - eid)); - - ar->arTxPending[eid]--; - - if ((eid != ar->arControlEp) || bypasswmi) { - ar->arTotalTxDataPending--; - } - - if (eid == ar->arControlEp) - { - if (ar->arWMIControlEpFull) { - /* since this packet completed, the WMI EP is no longer full */ - ar->arWMIControlEpFull = false; - } - - if (ar->arTxPending[eid] == 0) { - wakeEvent = true; - } - } - - if (status) { - if (status == A_ECANCELED) { - /* a packet was flushed */ - flushing = true; - } - AR6000_STAT_INC(ar, tx_errors); - if (status != A_NO_RESOURCE) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() -TX ERROR, status: 0x%x\n", __func__, - status)); - } - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("OK\n")); - flushing = false; - AR6000_STAT_INC(ar, tx_packets); - ar->arNetStats.tx_bytes += A_NETBUF_LEN(pktSkb); -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - aptcTR.bytesTransmitted += a_netbuf_to_len(pktSkb); - applyAPTCHeuristics(ar); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - } - - // TODO this needs to be looked at - if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable - && (eid != ar->arControlEp) && mapNo) - { - mapNo --; - ar->arNodeMap[mapNo].txPending --; - - if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) { - u32 i; - for (i = ar->arNodeNum; i > 0; i --) { - if (!ar->arNodeMap[i - 1].txPending) { - A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping)); - ar->arNodeNum --; - } else { - break; - } - } - } - } - - ar6000_free_cookie(ar, ar_cookie); - - if (ar->arNetQueueStopped) { - ar->arNetQueueStopped = false; - } - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - /* lock is released, we can freely call other kernel APIs */ - - /* free all skbs in our local list */ - while (!skb_queue_empty(&skb_queue)) { - /* use non-lock version */ - pktSkb = __skb_dequeue(&skb_queue); - A_NETBUF_FREE(pktSkb); - } - - if ((ar->arConnected == true) || bypasswmi) { - if (!flushing) { - /* don't wake the queue if we are flushing, other wise it will just - * keep queueing packets, which will keep failing */ - netif_wake_queue(ar->arNetDev); - } - } - - if (wakeEvent) { - wake_up(&arEvent); - } - -} - -sta_t * -ieee80211_find_conn(struct ar6_softc *ar, u8 *node_addr) -{ - sta_t *conn = NULL; - u8 i, max_conn; - - switch(ar->arNetworkType) { - case AP_NETWORK: - max_conn = AP_MAX_NUM_STA; - break; - default: - max_conn=0; - break; - } - - for (i = 0; i < max_conn; i++) { - if (IEEE80211_ADDR_EQ(node_addr, ar->sta_list[i].mac)) { - conn = &ar->sta_list[i]; - break; - } - } - - return conn; -} - -sta_t *ieee80211_find_conn_for_aid(struct ar6_softc *ar, u8 aid) -{ - sta_t *conn = NULL; - u8 ctr; - - for (ctr = 0; ctr < AP_MAX_NUM_STA; ctr++) { - if (ar->sta_list[ctr].aid == aid) { - conn = &ar->sta_list[ctr]; - break; - } - } - return conn; -} - -/* - * Receive event handler. This is called by HTC when a packet is received - */ -int pktcount; -static void -ar6000_rx(void *Context, struct htc_packet *pPacket) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext; - int minHdrLen; - u8 containsDot11Hdr = 0; - int status = pPacket->Status; - HTC_ENDPOINT_ID ept = pPacket->Endpoint; - - A_ASSERT((status) || - (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN))); - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_rx ar=0x%lx eid=%d, skb=0x%lx, data=0x%lx, len=0x%x status:%d", - (unsigned long)ar, ept, (unsigned long)skb, (unsigned long)pPacket->pBuffer, - pPacket->ActualLength, status)); - if (status) { - if (status != A_ECANCELED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("RX ERR (%d) \n",status)); - } - } - - /* take lock to protect buffer counts - * and adaptive power throughput state */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - - if (!status) { - AR6000_STAT_INC(ar, rx_packets); - ar->arNetStats.rx_bytes += pPacket->ActualLength; -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - aptcTR.bytesReceived += a_netbuf_to_len(skb); - applyAPTCHeuristics(ar); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - - A_NETBUF_PUT(skb, pPacket->ActualLength + HTC_HEADER_LEN); - A_NETBUF_PULL(skb, HTC_HEADER_LEN); - -#ifdef DEBUG - if (debugdriver >= 2) { - ar6000_dump_skb(skb); - } -#endif /* DEBUG */ - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - skb->dev = ar->arNetDev; - if (status) { - AR6000_STAT_INC(ar, rx_errors); - A_NETBUF_FREE(skb); - } else if (ar->arWmiEnabled == true) { - if (ept == ar->arControlEp) { - /* - * this is a wmi control msg - */ -#ifdef CONFIG_PM - ar6000_check_wow_status(ar, skb, true); -#endif /* CONFIG_PM */ - wmi_control_rx(ar->arWmi, skb); - } else { - WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb); - bool is_amsdu; - u8 tid; - - /* - * This check can be removed if after a while we do not - * see the warning. For now we leave it to ensure - * we drop these frames accordingly in case the - * target generates them for some reason. These - * were used for an internal PAL but that's not - * used or supported anymore. These frames should - * not come up from the target. - */ - if (WARN_ON(WMI_DATA_HDR_GET_DATA_TYPE(dhdr) == - WMI_DATA_HDR_DATA_TYPE_ACL)) { - AR6000_STAT_INC(ar, rx_errors); - A_NETBUF_FREE(skb); - return; - } - -#ifdef CONFIG_PM - ar6000_check_wow_status(ar, NULL, false); -#endif /* CONFIG_PM */ - /* - * this is a wmi data packet - */ - // NWF - - if (processDot11Hdr) { - minHdrLen = sizeof(WMI_DATA_HDR) + sizeof(struct ieee80211_frame) + sizeof(ATH_LLC_SNAP_HDR); - } else { - minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) + - sizeof(ATH_LLC_SNAP_HDR); - } - - /* In the case of AP mode we may receive NULL data frames - * that do not have LLC hdr. They are 16 bytes in size. - * Allow these frames in the AP mode. - * ACL data frames don't follow ethernet frame bounds for - * min length - */ - if (ar->arNetworkType != AP_NETWORK && - ((pPacket->ActualLength < minHdrLen) || - (pPacket->ActualLength > AR6000_MAX_RX_MESSAGE_SIZE))) - { - /* - * packet is too short or too long - */ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("TOO SHORT or TOO LONG\n")); - AR6000_STAT_INC(ar, rx_errors); - AR6000_STAT_INC(ar, rx_length_errors); - A_NETBUF_FREE(skb); - } else { - u16 seq_no; - u8 meta_type; - -#if 0 - /* Access RSSI values here */ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("RSSI %d\n", - ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi)); -#endif - /* Get the Power save state of the STA */ - if (ar->arNetworkType == AP_NETWORK) { - sta_t *conn = NULL; - u8 psState=0,prevPsState; - ATH_MAC_HDR *datap=NULL; - u16 offset; - - meta_type = WMI_DATA_HDR_GET_META(dhdr); - - psState = (((WMI_DATA_HDR *)A_NETBUF_DATA(skb))->info - >> WMI_DATA_HDR_PS_SHIFT) & WMI_DATA_HDR_PS_MASK; - - offset = sizeof(WMI_DATA_HDR); - - switch (meta_type) { - case 0: - break; - case WMI_META_VERSION_1: - offset += sizeof(WMI_RX_META_V1); - break; - case WMI_META_VERSION_2: - offset += sizeof(WMI_RX_META_V2); - break; - default: - break; - } - - datap = (ATH_MAC_HDR *)(A_NETBUF_DATA(skb)+offset); - conn = ieee80211_find_conn(ar, datap->srcMac); - - if (conn) { - /* if there is a change in PS state of the STA, - * take appropriate steps. - * 1. If Sleep-->Awake, flush the psq for the STA - * Clear the PVB for the STA. - * 2. If Awake-->Sleep, Starting queueing frames - * the STA. - */ - prevPsState = STA_IS_PWR_SLEEP(conn); - if (psState) { - STA_SET_PWR_SLEEP(conn); - } else { - STA_CLR_PWR_SLEEP(conn); - } - - if (prevPsState ^ STA_IS_PWR_SLEEP(conn)) { - - if (!STA_IS_PWR_SLEEP(conn)) { - - A_MUTEX_LOCK(&conn->psqLock); - while (!A_NETBUF_QUEUE_EMPTY(&conn->psq)) { - struct sk_buff *skb=NULL; - - skb = A_NETBUF_DEQUEUE(&conn->psq); - A_MUTEX_UNLOCK(&conn->psqLock); - ar6000_data_tx(skb,ar->arNetDev); - A_MUTEX_LOCK(&conn->psqLock); - } - A_MUTEX_UNLOCK(&conn->psqLock); - /* Clear the PVB for this STA */ - wmi_set_pvb_cmd(ar->arWmi, conn->aid, 0); - } - } - } else { - /* This frame is from a STA that is not associated*/ - A_ASSERT(false); - } - - /* Drop NULL data frames here */ - if((pPacket->ActualLength < minHdrLen) || - (pPacket->ActualLength > AR6000_MAX_RX_MESSAGE_SIZE)) { - A_NETBUF_FREE(skb); - goto rx_done; - } - } - - is_amsdu = WMI_DATA_HDR_IS_AMSDU(dhdr) ? true : false; - tid = WMI_DATA_HDR_GET_UP(dhdr); - seq_no = WMI_DATA_HDR_GET_SEQNO(dhdr); - meta_type = WMI_DATA_HDR_GET_META(dhdr); - containsDot11Hdr = WMI_DATA_HDR_GET_DOT11(dhdr); - - wmi_data_hdr_remove(ar->arWmi, skb); - - switch (meta_type) { - case WMI_META_VERSION_1: - { - WMI_RX_META_V1 *pMeta = (WMI_RX_META_V1 *)A_NETBUF_DATA(skb); - A_PRINTF("META %d %d %d %d %x\n", pMeta->status, pMeta->rix, pMeta->rssi, pMeta->channel, pMeta->flags); - A_NETBUF_PULL((void*)skb, sizeof(WMI_RX_META_V1)); - break; - } - case WMI_META_VERSION_2: - { - WMI_RX_META_V2 *pMeta = (WMI_RX_META_V2 *)A_NETBUF_DATA(skb); - if(pMeta->csumFlags & 0x1){ - skb->ip_summed=CHECKSUM_COMPLETE; - skb->csum=(pMeta->csum); - } - A_NETBUF_PULL((void*)skb, sizeof(WMI_RX_META_V2)); - break; - } - default: - break; - } - - A_ASSERT(status == 0); - - /* NWF: print the 802.11 hdr bytes */ - if(containsDot11Hdr) { - status = wmi_dot11_hdr_remove(ar->arWmi,skb); - } else if(!is_amsdu) { - status = wmi_dot3_2_dix(skb); - } - - if (status) { - /* Drop frames that could not be processed (lack of memory, etc.) */ - A_NETBUF_FREE(skb); - goto rx_done; - } - - if ((ar->arNetDev->flags & IFF_UP) == IFF_UP) { - if (ar->arNetworkType == AP_NETWORK) { - struct sk_buff *skb1 = NULL; - ATH_MAC_HDR *datap; - - datap = (ATH_MAC_HDR *)A_NETBUF_DATA(skb); - if (IEEE80211_IS_MULTICAST(datap->dstMac)) { - /* Bcast/Mcast frames should be sent to the OS - * stack as well as on the air. - */ - skb1 = skb_copy(skb,GFP_ATOMIC); - } else { - /* Search for a connected STA with dstMac as - * the Mac address. If found send the frame to - * it on the air else send the frame up the - * stack - */ - sta_t *conn = NULL; - conn = ieee80211_find_conn(ar, datap->dstMac); - - if (conn && ar->intra_bss) { - skb1 = skb; - skb = NULL; - } else if(conn && !ar->intra_bss) { - A_NETBUF_FREE(skb); - skb = NULL; - } - } - if (skb1) { - ar6000_data_tx(skb1, ar->arNetDev); - } - } - } - aggr_process_recv_frm(ar->aggr_cntxt, tid, seq_no, is_amsdu, (void **)&skb); - ar6000_deliver_frames_to_nw_stack((void *) ar->arNetDev, (void *)skb); - } - } - } else { - if (EPPING_ALIGNMENT_PAD > 0) { - A_NETBUF_PULL(skb, EPPING_ALIGNMENT_PAD); - } - ar6000_deliver_frames_to_nw_stack((void *)ar->arNetDev, (void *)skb); - } - -rx_done: - - return; -} - -static void -ar6000_deliver_frames_to_nw_stack(void *dev, void *osbuf) -{ - struct sk_buff *skb = (struct sk_buff *)osbuf; - - if(skb) { - skb->dev = dev; - if ((skb->dev->flags & IFF_UP) == IFF_UP) { -#ifdef CONFIG_PM - ar6000_check_wow_status((struct ar6_softc *)ar6k_priv(dev), skb, false); -#endif /* CONFIG_PM */ - skb->protocol = eth_type_trans(skb, skb->dev); - /* - * If this routine is called on a ISR (Hard IRQ) or DSR (Soft IRQ) - * or tasklet use the netif_rx to deliver the packet to the stack - * netif_rx will queue the packet onto the receive queue and mark - * the softirq thread has a pending action to complete. Kernel will - * schedule the softIrq kernel thread after processing the DSR. - * - * If this routine is called on a process context, use netif_rx_ni - * which will schedle the softIrq kernel thread after queuing the packet. - */ - if (in_interrupt()) { - netif_rx(skb); - } else { - netif_rx_ni(skb); - } - } else { - A_NETBUF_FREE(skb); - } - } -} - -#if 0 -static void -ar6000_deliver_frames_to_bt_stack(void *dev, void *osbuf) -{ - struct sk_buff *skb = (struct sk_buff *)osbuf; - - if(skb) { - skb->dev = dev; - if ((skb->dev->flags & IFF_UP) == IFF_UP) { - skb->protocol = htons(ETH_P_CONTROL); - netif_rx(skb); - } else { - A_NETBUF_FREE(skb); - } - } -} -#endif - -static void -ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - void *osBuf; - int RxBuffers; - int buffersToRefill; - struct htc_packet *pPacket; - struct htc_packet_queue queue; - - buffersToRefill = (int)AR6000_MAX_RX_BUFFERS - - HTCGetNumRecvBuffers(ar->arHtcTarget, Endpoint); - - if (buffersToRefill <= 0) { - /* fast return, nothing to fill */ - return; - } - - INIT_HTC_PACKET_QUEUE(&queue); - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n", - buffersToRefill, Endpoint)); - - for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) { - osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE); - if (NULL == osBuf) { - break; - } - /* the HTC packet wrapper is at the head of the reserved area - * in the skb */ - pPacket = (struct htc_packet *)(A_NETBUF_HEAD(osBuf)); - /* set re-fill info */ - SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint); - /* add to queue */ - HTC_PACKET_ENQUEUE(&queue,pPacket); - } - - if (!HTC_QUEUE_EMPTY(&queue)) { - /* add packets */ - HTCAddReceivePktMultiple(ar->arHtcTarget, &queue); - } - -} - - /* clean up our amsdu buffer list */ -static void ar6000_cleanup_amsdu_rxbufs(struct ar6_softc *ar) -{ - struct htc_packet *pPacket; - void *osBuf; - - /* empty AMSDU buffer queue and free OS bufs */ - while (true) { - - AR6000_SPIN_LOCK(&ar->arLock, 0); - pPacket = HTC_PACKET_DEQUEUE(&ar->amsdu_rx_buffer_queue); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (NULL == pPacket) { - break; - } - - osBuf = pPacket->pPktContext; - if (NULL == osBuf) { - A_ASSERT(false); - break; - } - - A_NETBUF_FREE(osBuf); - } - -} - - - /* refill the amsdu buffer list */ -static void ar6000_refill_amsdu_rxbufs(struct ar6_softc *ar, int Count) -{ - struct htc_packet *pPacket; - void *osBuf; - - while (Count > 0) { - osBuf = A_NETBUF_ALLOC(AR6000_AMSDU_BUFFER_SIZE); - if (NULL == osBuf) { - break; - } - /* the HTC packet wrapper is at the head of the reserved area - * in the skb */ - pPacket = (struct htc_packet *)(A_NETBUF_HEAD(osBuf)); - /* set re-fill info */ - SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_AMSDU_BUFFER_SIZE,0); - - AR6000_SPIN_LOCK(&ar->arLock, 0); - /* put it in the list */ - HTC_PACKET_ENQUEUE(&ar->amsdu_rx_buffer_queue,pPacket); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - Count--; - } - -} - - /* callback to allocate a large receive buffer for a pending packet. This function is called when - * an HTC packet arrives whose length exceeds a threshold value - * - * We use a pre-allocated list of buffers of maximum AMSDU size (4K). Under linux it is more optimal to - * keep the allocation size the same to optimize cached-slab allocations. - * - * */ -static struct htc_packet *ar6000_alloc_amsdu_rxbuf(void *Context, HTC_ENDPOINT_ID Endpoint, int Length) -{ - struct htc_packet *pPacket = NULL; - struct ar6_softc *ar = (struct ar6_softc *)Context; - int refillCount = 0; - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_alloc_amsdu_rxbuf: eid=%d, Length:%d\n",Endpoint,Length)); - - do { - - if (Length <= AR6000_BUFFER_SIZE) { - /* shouldn't be getting called on normal sized packets */ - A_ASSERT(false); - break; - } - - if (Length > AR6000_AMSDU_BUFFER_SIZE) { - A_ASSERT(false); - break; - } - - AR6000_SPIN_LOCK(&ar->arLock, 0); - /* allocate a packet from the list */ - pPacket = HTC_PACKET_DEQUEUE(&ar->amsdu_rx_buffer_queue); - /* see if we need to refill again */ - refillCount = AR6000_MAX_AMSDU_RX_BUFFERS - HTC_PACKET_QUEUE_DEPTH(&ar->amsdu_rx_buffer_queue); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (NULL == pPacket) { - break; - } - /* set actual endpoint ID */ - pPacket->Endpoint = Endpoint; - - } while (false); - - if (refillCount >= AR6000_AMSDU_REFILL_THRESHOLD) { - ar6000_refill_amsdu_rxbufs(ar,refillCount); - } - - return pPacket; -} - -static void -ar6000_set_multicast_list(struct net_device *dev) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000: Multicast filter not supported\n")); -} - -static struct net_device_stats * -ar6000_get_stats(struct net_device *dev) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - return &ar->arNetStats; -} - -void -ar6000_ready_event(void *devt, u8 *datap, u8 phyCap, u32 sw_ver, u32 abi_ver) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - struct net_device *dev = ar->arNetDev; - - memcpy(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", - dev->dev_addr[0], dev->dev_addr[1], - dev->dev_addr[2], dev->dev_addr[3], - dev->dev_addr[4], dev->dev_addr[5])); - - ar->arPhyCapability = phyCap; - ar->arVersion.wlan_ver = sw_ver; - ar->arVersion.abi_ver = abi_ver; - - snprintf(ar->wdev->wiphy->fw_version, sizeof(ar->wdev->wiphy->fw_version), - "%u:%u:%u:%u", - (ar->arVersion.wlan_ver & 0xf0000000) >> 28, - (ar->arVersion.wlan_ver & 0x0f000000) >> 24, - (ar->arVersion.wlan_ver & 0x00ff0000) >> 16, - (ar->arVersion.wlan_ver & 0x0000ffff)); - - /* Indicate to the waiting thread that the ready event was received */ - ar->arWmiReady = true; - wake_up(&arEvent); -} - -void ar6000_install_static_wep_keys(struct ar6_softc *ar) -{ - u8 index; - u8 keyUsage; - - for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) { - if (ar->arWepKeyList[index].arKeyLen) { - keyUsage = GROUP_USAGE; - if (index == ar->arDefTxKeyIndex) { - keyUsage |= TX_USAGE; - } - wmi_addKey_cmd(ar->arWmi, - index, - WEP_CRYPT, - keyUsage, - ar->arWepKeyList[index].arKeyLen, - NULL, - ar->arWepKeyList[index].arKey, KEY_OP_INIT_VAL, NULL, - NO_SYNC_WMIFLAG); - } - } -} - -void -add_new_sta(struct ar6_softc *ar, u8 *mac, u16 aid, u8 *wpaie, - u8 ielen, u8 keymgmt, u8 ucipher, u8 auth) -{ - u8 free_slot=aid-1; - - memcpy(ar->sta_list[free_slot].mac, mac, ATH_MAC_LEN); - memcpy(ar->sta_list[free_slot].wpa_ie, wpaie, ielen); - ar->sta_list[free_slot].aid = aid; - ar->sta_list[free_slot].keymgmt = keymgmt; - ar->sta_list[free_slot].ucipher = ucipher; - ar->sta_list[free_slot].auth = auth; - ar->sta_list_index = ar->sta_list_index | (1 << free_slot); - ar->arAPStats.sta[free_slot].aid = aid; -} - -void -ar6000_connect_event(struct ar6_softc *ar, u16 channel, u8 *bssid, - u16 listenInterval, u16 beaconInterval, - NETWORK_TYPE networkType, u8 beaconIeLen, - u8 assocReqLen, u8 assocRespLen, - u8 *assocInfo) -{ - union iwreq_data wrqu; - int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos; - static const char *tag1 = "ASSOCINFO(ReqIEs="; - static const char *tag2 = "ASSOCRESPIE="; - static const char *beaconIetag = "BEACONIE="; - char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + strlen(tag1) + 1]; - char *pos; - u8 key_op_ctrl; - unsigned long flags; - struct ieee80211req_key *ik; - CRYPTO_TYPE keyType = NONE_CRYPT; - - if(ar->arNetworkType & AP_NETWORK) { - struct net_device *dev = ar->arNetDev; - if(memcmp(dev->dev_addr, bssid, ATH_MAC_LEN)==0) { - ar->arACS = channel; - ik = &ar->ap_mode_bkey; - - switch(ar->arAuthMode) { - case NONE_AUTH: - if(ar->arPairwiseCrypto == WEP_CRYPT) { - ar6000_install_static_wep_keys(ar); - } -#ifdef WAPI_ENABLE - else if(ar->arPairwiseCrypto == WAPI_CRYPT) { - ap_set_wapi_key(ar, ik); - } -#endif - break; - case WPA_PSK_AUTH: - case WPA2_PSK_AUTH: - case (WPA_PSK_AUTH|WPA2_PSK_AUTH): - switch (ik->ik_type) { - case IEEE80211_CIPHER_TKIP: - keyType = TKIP_CRYPT; - break; - case IEEE80211_CIPHER_AES_CCM: - keyType = AES_CRYPT; - break; - default: - goto skip_key; - } - wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, GROUP_USAGE, - ik->ik_keylen, (u8 *)&ik->ik_keyrsc, - ik->ik_keydata, KEY_OP_INIT_VAL, ik->ik_macaddr, - SYNC_BOTH_WMIFLAG); - - break; - } -skip_key: - ar->arConnected = true; - return; - } - - A_PRINTF("NEW STA %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x \n " - " AID=%d \n", bssid[0], bssid[1], bssid[2], - bssid[3], bssid[4], bssid[5], channel); - switch ((listenInterval>>8)&0xFF) { - case OPEN_AUTH: - A_PRINTF("AUTH: OPEN\n"); - break; - case SHARED_AUTH: - A_PRINTF("AUTH: SHARED\n"); - break; - default: - A_PRINTF("AUTH: Unknown\n"); - break; - } - switch (listenInterval&0xFF) { - case WPA_PSK_AUTH: - A_PRINTF("KeyMgmt: WPA-PSK\n"); - break; - case WPA2_PSK_AUTH: - A_PRINTF("KeyMgmt: WPA2-PSK\n"); - break; - default: - A_PRINTF("KeyMgmt: NONE\n"); - break; - } - switch (beaconInterval) { - case AES_CRYPT: - A_PRINTF("Cipher: AES\n"); - break; - case TKIP_CRYPT: - A_PRINTF("Cipher: TKIP\n"); - break; - case WEP_CRYPT: - A_PRINTF("Cipher: WEP\n"); - break; -#ifdef WAPI_ENABLE - case WAPI_CRYPT: - A_PRINTF("Cipher: WAPI\n"); - break; -#endif - default: - A_PRINTF("Cipher: NONE\n"); - break; - } - - add_new_sta(ar, bssid, channel /*aid*/, - assocInfo /* WPA IE */, assocRespLen /* IE len */, - listenInterval&0xFF /* Keymgmt */, beaconInterval /* cipher */, - (listenInterval>>8)&0xFF /* auth alg */); - - /* Send event to application */ - A_MEMZERO(&wrqu, sizeof(wrqu)); - memcpy(wrqu.addr.sa_data, bssid, ATH_MAC_LEN); - wireless_send_event(ar->arNetDev, IWEVREGISTERED, &wrqu, NULL); - /* In case the queue is stopped when we switch modes, this will - * wake it up - */ - netif_wake_queue(ar->arNetDev); - return; - } - - ar6k_cfg80211_connect_event(ar, channel, bssid, - listenInterval, beaconInterval, - networkType, beaconIeLen, - assocReqLen, assocRespLen, - assocInfo); - - memcpy(ar->arBssid, bssid, sizeof(ar->arBssid)); - ar->arBssChannel = channel; - - A_PRINTF("AR6000 connected event on freq %d ", channel); - A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x " - " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d" - " assocRespLen =%d\n", - bssid[0], bssid[1], bssid[2], - bssid[3], bssid[4], bssid[5], - listenInterval, beaconInterval, - beaconIeLen, assocReqLen, assocRespLen); - if (networkType & ADHOC_NETWORK) { - if (networkType & ADHOC_CREATOR) { - A_PRINTF("Network: Adhoc (Creator)\n"); - } else { - A_PRINTF("Network: Adhoc (Joiner)\n"); - } - } else { - A_PRINTF("Network: Infrastructure\n"); - } - - if ((ar->arNetworkType == INFRA_NETWORK)) { - wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB); - } - - if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nBeaconIEs= ")); - - beacon_ie_pos = 0; - A_MEMZERO(buf, sizeof(buf)); - sprintf(buf, "%s", beaconIetag); - pos = buf + 9; - for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i])); - sprintf(pos, "%2.2x", assocInfo[i]); - pos += 2; - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); - } - - if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2)))) - { - assoc_resp_ie_pos = beaconIeLen + assocReqLen + - sizeof(u16) + /* capinfo*/ - sizeof(u16) + /* status Code */ - sizeof(u16) ; /* associd */ - A_MEMZERO(buf, sizeof(buf)); - sprintf(buf, "%s", tag2); - pos = buf + 12; - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nAssocRespIEs= ")); - /* - * The Association Response Frame w.o. the WLAN header is delivered to - * the host, so skip over to the IEs - */ - for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++) - { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i])); - sprintf(pos, "%2.2x", assocInfo[i]); - pos += 2; - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); - } - - if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) { - /* - * assoc Request includes capability and listen interval. Skip these. - */ - assoc_req_ie_pos = beaconIeLen + - sizeof(u16) + /* capinfo*/ - sizeof(u16); /* listen interval */ - - A_MEMZERO(buf, sizeof(buf)); - sprintf(buf, "%s", tag1); - pos = buf + 17; - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("AssocReqIEs= ")); - for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i])); - sprintf(pos, "%2.2x", assocInfo[i]); - pos += 2; - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); - } - - if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN && - ar->user_saved_keys.keyOk == true) - { - key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC; - - if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) { - key_op_ctrl &= ~KEY_OP_INIT_RSC; - } else { - key_op_ctrl |= KEY_OP_INIT_RSC; - } - ar6000_reinstall_keys(ar, key_op_ctrl); - } - - netif_wake_queue(ar->arNetDev); - - /* Update connect & link status atomically */ - spin_lock_irqsave(&ar->arLock, flags); - ar->arConnected = true; - ar->arConnectPending = false; - netif_carrier_on(ar->arNetDev); - spin_unlock_irqrestore(&ar->arLock, flags); - /* reset the rx aggr state */ - aggr_reset_state(ar->aggr_cntxt); - reconnect_flag = 0; - - A_MEMZERO(&wrqu, sizeof(wrqu)); - memcpy(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN); - wrqu.addr.sa_family = ARPHRD_ETHER; - wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL); - if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) { - A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap)); - ar->arNodeNum = 0; - ar->arNexEpId = ENDPOINT_2; - } - if (!ar->arUserBssFilter) { - wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0); - } - -} - -void ar6000_set_numdataendpts(struct ar6_softc *ar, u32 num) -{ - A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1)); - ar->arNumDataEndPts = num; -} - -void -sta_cleanup(struct ar6_softc *ar, u8 i) -{ - struct sk_buff *skb; - - /* empty the queued pkts in the PS queue if any */ - A_MUTEX_LOCK(&ar->sta_list[i].psqLock); - while (!A_NETBUF_QUEUE_EMPTY(&ar->sta_list[i].psq)) { - skb = A_NETBUF_DEQUEUE(&ar->sta_list[i].psq); - A_NETBUF_FREE(skb); - } - A_MUTEX_UNLOCK(&ar->sta_list[i].psqLock); - - /* Zero out the state fields */ - A_MEMZERO(&ar->arAPStats.sta[ar->sta_list[i].aid-1], sizeof(WMI_PER_STA_STAT)); - A_MEMZERO(&ar->sta_list[i].mac, ATH_MAC_LEN); - A_MEMZERO(&ar->sta_list[i].wpa_ie, IEEE80211_MAX_IE); - ar->sta_list[i].aid = 0; - ar->sta_list[i].flags = 0; - - ar->sta_list_index = ar->sta_list_index & ~(1 << i); - -} - -u8 remove_sta(struct ar6_softc *ar, u8 *mac, u16 reason) -{ - u8 i, removed=0; - - if(IS_MAC_NULL(mac)) { - return removed; - } - - if(IS_MAC_BCAST(mac)) { - A_PRINTF("DEL ALL STA\n"); - for(i=0; i < AP_MAX_NUM_STA; i++) { - if(!IS_MAC_NULL(ar->sta_list[i].mac)) { - sta_cleanup(ar, i); - removed = 1; - } - } - } else { - for(i=0; i < AP_MAX_NUM_STA; i++) { - if(memcmp(ar->sta_list[i].mac, mac, ATH_MAC_LEN)==0) { - A_PRINTF("DEL STA %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x " - " aid=%d REASON=%d\n", mac[0], mac[1], mac[2], - mac[3], mac[4], mac[5], ar->sta_list[i].aid, reason); - - sta_cleanup(ar, i); - removed = 1; - break; - } - } - } - return removed; -} - -void -ar6000_disconnect_event(struct ar6_softc *ar, u8 reason, u8 *bssid, - u8 assocRespLen, u8 *assocInfo, u16 protocolReasonStatus) -{ - u8 i; - unsigned long flags; - union iwreq_data wrqu; - - if(ar->arNetworkType & AP_NETWORK) { - union iwreq_data wrqu; - struct sk_buff *skb; - - if(!remove_sta(ar, bssid, protocolReasonStatus)) { - return; - } - - /* If there are no more associated STAs, empty the mcast PS q */ - if (ar->sta_list_index == 0) { - A_MUTEX_LOCK(&ar->mcastpsqLock); - while (!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) { - skb = A_NETBUF_DEQUEUE(&ar->mcastpsq); - A_NETBUF_FREE(skb); - } - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - /* Clear the LSB of the BitMapCtl field of the TIM IE */ - if (ar->arWmiReady) { - wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 0); - } - } - - if(!IS_MAC_BCAST(bssid)) { - /* Send event to application */ - A_MEMZERO(&wrqu, sizeof(wrqu)); - memcpy(wrqu.addr.sa_data, bssid, ATH_MAC_LEN); - wireless_send_event(ar->arNetDev, IWEVEXPIRED, &wrqu, NULL); - } - - ar->arConnected = false; - return; - } - - ar6k_cfg80211_disconnect_event(ar, reason, bssid, - assocRespLen, assocInfo, - protocolReasonStatus); - - /* Send disconnect event to supplicant */ - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.addr.sa_family = ARPHRD_ETHER; - wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL); - - /* it is necessary to clear the host-side rx aggregation state */ - aggr_reset_state(ar->aggr_cntxt); - - A_UNTIMEOUT(&ar->disconnect_timer); - - A_PRINTF("AR6000 disconnected"); - if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) { - A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", - bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]); - } - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nDisconnect Reason is %d", reason)); - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nProtocol Reason/Status Code is %d", protocolReasonStatus)); - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nAssocResp Frame = %s", - assocRespLen ? " " : "NULL")); - for (i = 0; i < assocRespLen; i++) { - if (!(i % 0x10)) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i])); - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - /* - * If the event is due to disconnect cmd from the host, only they the target - * would stop trying to connect. Under any other condition, target would - * keep trying to connect. - * - */ - if( reason == DISCONNECT_CMD) - { - if ((!ar->arUserBssFilter) && (ar->arWmiReady)) { - wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0); - } - } else { - ar->arConnectPending = true; - if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) || - ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) { - ar->arConnected = true; - return; - } - } - - if ((reason == NO_NETWORK_AVAIL) && (ar->arWmiReady)) - { - bss_t *pWmiSsidnode = NULL; - - /* remove the current associated bssid node */ - wmi_free_node (ar->arWmi, bssid); - - /* - * In case any other same SSID nodes are present - * remove it, since those nodes also not available now - */ - do - { - /* - * Find the nodes based on SSID and remove it - * NOTE :: This case will not work out for Hidden-SSID - */ - pWmiSsidnode = wmi_find_Ssidnode (ar->arWmi, ar->arSsid, ar->arSsidLen, false, true); - - if (pWmiSsidnode) - { - wmi_free_node (ar->arWmi, pWmiSsidnode->ni_macaddr); - } - - } while (pWmiSsidnode); - } - - /* Update connect & link status atomically */ - spin_lock_irqsave(&ar->arLock, flags); - ar->arConnected = false; - netif_carrier_off(ar->arNetDev); - spin_unlock_irqrestore(&ar->arLock, flags); - - if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) { - reconnect_flag = 0; - } - - if (reason != CSERV_DISCONNECT) - { - ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; - ar->user_key_ctrl = 0; - } - - netif_stop_queue(ar->arNetDev); - A_MEMZERO(ar->arBssid, sizeof(ar->arBssid)); - ar->arBssChannel = 0; - ar->arBeaconInterval = 0; - - ar6000_TxDataCleanup(ar); -} - -void -ar6000_regDomain_event(struct ar6_softc *ar, u32 regCode) -{ - A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode); - ar->arRegCode = regCode; -} - -void -ar6000_aggr_rcv_addba_req_evt(struct ar6_softc *ar, WMI_ADDBA_REQ_EVENT *evt) -{ - if(evt->status == 0) { - aggr_recv_addba_req_evt(ar->aggr_cntxt, evt->tid, evt->st_seq_no, evt->win_sz); - } -} - -void -ar6000_aggr_rcv_addba_resp_evt(struct ar6_softc *ar, WMI_ADDBA_RESP_EVENT *evt) -{ - A_PRINTF("ADDBA RESP. tid %d status %d, sz %d\n", evt->tid, evt->status, evt->amsdu_sz); - if(evt->status == 0) { - } -} - -void -ar6000_aggr_rcv_delba_req_evt(struct ar6_softc *ar, WMI_DELBA_EVENT *evt) -{ - aggr_recv_delba_req_evt(ar->aggr_cntxt, evt->tid); -} - -void register_pal_cb(ar6k_pal_config_t *palConfig_p) -{ - ar6k_pal_config_g = *palConfig_p; -} - -void -ar6000_hci_event_rcv_evt(struct ar6_softc *ar, WMI_HCI_EVENT *cmd) -{ - void *osbuf = NULL; - s8 i; - u8 size, *buf; - int ret = 0; - - size = cmd->evt_buf_sz + 4; - osbuf = A_NETBUF_ALLOC(size); - if (osbuf == NULL) { - ret = A_NO_MEMORY; - A_PRINTF("Error in allocating netbuf \n"); - return; - } - - A_NETBUF_PUT(osbuf, size); - buf = (u8 *)A_NETBUF_DATA(osbuf); - /* First 2-bytes carry HCI event/ACL data type - * the next 2 are free - */ - *((short *)buf) = WMI_HCI_EVENT_EVENTID; - buf += sizeof(int); - memcpy(buf, cmd->buf, cmd->evt_buf_sz); - - ar6000_deliver_frames_to_nw_stack(ar->arNetDev, osbuf); - if(loghci) { - A_PRINTF_LOG("HCI Event From PAL <-- \n"); - for(i = 0; i < cmd->evt_buf_sz; i++) { - A_PRINTF_LOG("0x%02x ", cmd->buf[i]); - if((i % 10) == 0) { - A_PRINTF_LOG("\n"); - } - } - A_PRINTF_LOG("\n"); - A_PRINTF_LOG("==================================\n"); - } -} - -void -ar6000_neighborReport_event(struct ar6_softc *ar, int numAps, WMI_NEIGHBOR_INFO *info) -{ -#if WIRELESS_EXT >= 18 - struct iw_pmkid_cand *pmkcand; -#else /* WIRELESS_EXT >= 18 */ - static const char *tag = "PRE-AUTH"; - char buf[128]; -#endif /* WIRELESS_EXT >= 18 */ - - union iwreq_data wrqu; - int i; - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("AR6000 Neighbor Report Event\n")); - for (i=0; i < numAps; info++, i++) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", - info->bssid[0], info->bssid[1], info->bssid[2], - info->bssid[3], info->bssid[4], info->bssid[5])); - if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("preauth-cap")); - } - if (info->bssFlags & WMI_PMKID_VALID_BSS) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,(" pmkid-valid\n")); - continue; /* we skip bss if the pmkid is already valid */ - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("\n")); - A_MEMZERO(&wrqu, sizeof(wrqu)); -#if WIRELESS_EXT >= 18 - pmkcand = A_MALLOC_NOWAIT(sizeof(struct iw_pmkid_cand)); - A_MEMZERO(pmkcand, sizeof(struct iw_pmkid_cand)); - pmkcand->index = i; - pmkcand->flags = info->bssFlags; - memcpy(pmkcand->bssid.sa_data, info->bssid, ATH_MAC_LEN); - wrqu.data.length = sizeof(struct iw_pmkid_cand); - wireless_send_event(ar->arNetDev, IWEVPMKIDCAND, &wrqu, (char *)pmkcand); - kfree(pmkcand); -#else /* WIRELESS_EXT >= 18 */ - snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x", - tag, - info->bssid[0], info->bssid[1], info->bssid[2], - info->bssid[3], info->bssid[4], info->bssid[5], - i, info->bssFlags); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -#endif /* WIRELESS_EXT >= 18 */ - } -} - -void -ar6000_tkip_micerr_event(struct ar6_softc *ar, u8 keyid, bool ismcast) -{ - static const char *tag = "MLME-MICHAELMICFAILURE.indication"; - char buf[128]; - union iwreq_data wrqu; - - /* - * For AP case, keyid will have aid of STA which sent pkt with - * MIC error. Use this aid to get MAC & send it to hostapd. - */ - if (ar->arNetworkType == AP_NETWORK) { - sta_t *s = ieee80211_find_conn_for_aid(ar, (keyid >> 2)); - if(!s){ - A_PRINTF("AP TKIP MIC error received from Invalid aid / STA not found =%d\n", keyid); - return; - } - A_PRINTF("AP TKIP MIC error received from aid=%d\n", keyid); - snprintf(buf,sizeof(buf), "%s addr=%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x", - tag, s->mac[0],s->mac[1],s->mac[2],s->mac[3],s->mac[4],s->mac[5]); - } else { - - ar6k_cfg80211_tkip_micerr_event(ar, keyid, ismcast); - - A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n", - keyid & 0x3, ismcast ? "multi": "uni"); - snprintf(buf, sizeof(buf), "%s(keyid=%d %sicast)", tag, keyid & 0x3, - ismcast ? "mult" : "un"); - } - - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -} - -void -ar6000_scanComplete_event(struct ar6_softc *ar, int status) -{ - - ar6k_cfg80211_scanComplete_event(ar, status); - - if (!ar->arUserBssFilter) { - wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0); - } - if (ar->scan_triggered) { - if (status== 0) { - union iwreq_data wrqu; - A_MEMZERO(&wrqu, sizeof(wrqu)); - wireless_send_event(ar->arNetDev, SIOCGIWSCAN, &wrqu, NULL); - } - ar->scan_triggered = 0; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,( "AR6000 scan complete: %d\n", status)); -} - -void -ar6000_targetStats_event(struct ar6_softc *ar, u8 *ptr, u32 len) -{ - u8 ac; - - if(ar->arNetworkType == AP_NETWORK) { - WMI_AP_MODE_STAT *p = (WMI_AP_MODE_STAT *)ptr; - WMI_AP_MODE_STAT *ap = &ar->arAPStats; - - if (len < sizeof(*p)) { - return; - } - - for(ac=0;ac<AP_MAX_NUM_STA;ac++) { - ap->sta[ac].tx_bytes += p->sta[ac].tx_bytes; - ap->sta[ac].tx_pkts += p->sta[ac].tx_pkts; - ap->sta[ac].tx_error += p->sta[ac].tx_error; - ap->sta[ac].tx_discard += p->sta[ac].tx_discard; - ap->sta[ac].rx_bytes += p->sta[ac].rx_bytes; - ap->sta[ac].rx_pkts += p->sta[ac].rx_pkts; - ap->sta[ac].rx_error += p->sta[ac].rx_error; - ap->sta[ac].rx_discard += p->sta[ac].rx_discard; - } - - } else { - WMI_TARGET_STATS *pTarget = (WMI_TARGET_STATS *)ptr; - TARGET_STATS *pStats = &ar->arTargetStats; - - if (len < sizeof(*pTarget)) { - return; - } - - // Update the RSSI of the connected bss. - if (ar->arConnected) { - bss_t *pConnBss = NULL; - - pConnBss = wmi_find_node(ar->arWmi,ar->arBssid); - if (pConnBss) - { - pConnBss->ni_rssi = pTarget->cservStats.cs_aveBeacon_rssi; - pConnBss->ni_snr = pTarget->cservStats.cs_aveBeacon_snr; - wmi_node_return(ar->arWmi, pConnBss); - } - } - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 updating target stats\n")); - pStats->tx_packets += pTarget->txrxStats.tx_stats.tx_packets; - pStats->tx_bytes += pTarget->txrxStats.tx_stats.tx_bytes; - pStats->tx_unicast_pkts += pTarget->txrxStats.tx_stats.tx_unicast_pkts; - pStats->tx_unicast_bytes += pTarget->txrxStats.tx_stats.tx_unicast_bytes; - pStats->tx_multicast_pkts += pTarget->txrxStats.tx_stats.tx_multicast_pkts; - pStats->tx_multicast_bytes += pTarget->txrxStats.tx_stats.tx_multicast_bytes; - pStats->tx_broadcast_pkts += pTarget->txrxStats.tx_stats.tx_broadcast_pkts; - pStats->tx_broadcast_bytes += pTarget->txrxStats.tx_stats.tx_broadcast_bytes; - pStats->tx_rts_success_cnt += pTarget->txrxStats.tx_stats.tx_rts_success_cnt; - for(ac = 0; ac < WMM_NUM_AC; ac++) - pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac]; - pStats->tx_errors += pTarget->txrxStats.tx_stats.tx_errors; - pStats->tx_failed_cnt += pTarget->txrxStats.tx_stats.tx_failed_cnt; - pStats->tx_retry_cnt += pTarget->txrxStats.tx_stats.tx_retry_cnt; - pStats->tx_mult_retry_cnt += pTarget->txrxStats.tx_stats.tx_mult_retry_cnt; - pStats->tx_rts_fail_cnt += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt; - pStats->tx_unicast_rate = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate); - - pStats->rx_packets += pTarget->txrxStats.rx_stats.rx_packets; - pStats->rx_bytes += pTarget->txrxStats.rx_stats.rx_bytes; - pStats->rx_unicast_pkts += pTarget->txrxStats.rx_stats.rx_unicast_pkts; - pStats->rx_unicast_bytes += pTarget->txrxStats.rx_stats.rx_unicast_bytes; - pStats->rx_multicast_pkts += pTarget->txrxStats.rx_stats.rx_multicast_pkts; - pStats->rx_multicast_bytes += pTarget->txrxStats.rx_stats.rx_multicast_bytes; - pStats->rx_broadcast_pkts += pTarget->txrxStats.rx_stats.rx_broadcast_pkts; - pStats->rx_broadcast_bytes += pTarget->txrxStats.rx_stats.rx_broadcast_bytes; - pStats->rx_fragment_pkt += pTarget->txrxStats.rx_stats.rx_fragment_pkt; - pStats->rx_errors += pTarget->txrxStats.rx_stats.rx_errors; - pStats->rx_crcerr += pTarget->txrxStats.rx_stats.rx_crcerr; - pStats->rx_key_cache_miss += pTarget->txrxStats.rx_stats.rx_key_cache_miss; - pStats->rx_decrypt_err += pTarget->txrxStats.rx_stats.rx_decrypt_err; - pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames; - pStats->rx_unicast_rate = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate); - - - pStats->tkip_local_mic_failure - += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure; - pStats->tkip_counter_measures_invoked - += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked; - pStats->tkip_replays += pTarget->txrxStats.tkipCcmpStats.tkip_replays; - pStats->tkip_format_errors += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors; - pStats->ccmp_format_errors += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors; - pStats->ccmp_replays += pTarget->txrxStats.tkipCcmpStats.ccmp_replays; - - pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt; - pStats->noise_floor_calibation = pTarget->noise_floor_calibation; - - pStats->cs_bmiss_cnt += pTarget->cservStats.cs_bmiss_cnt; - pStats->cs_lowRssi_cnt += pTarget->cservStats.cs_lowRssi_cnt; - pStats->cs_connect_cnt += pTarget->cservStats.cs_connect_cnt; - pStats->cs_disconnect_cnt += pTarget->cservStats.cs_disconnect_cnt; - pStats->cs_aveBeacon_snr = pTarget->cservStats.cs_aveBeacon_snr; - pStats->cs_aveBeacon_rssi = pTarget->cservStats.cs_aveBeacon_rssi; - - if (enablerssicompensation) { - pStats->cs_aveBeacon_rssi = - rssi_compensation_calc(ar, pStats->cs_aveBeacon_rssi); - } - pStats->cs_lastRoam_msec = pTarget->cservStats.cs_lastRoam_msec; - pStats->cs_snr = pTarget->cservStats.cs_snr; - pStats->cs_rssi = pTarget->cservStats.cs_rssi; - - pStats->lq_val = pTarget->lqVal; - - pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped; - pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups; - pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups; - pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded; - pStats->arp_received += pTarget->arpStats.arp_received; - pStats->arp_matched += pTarget->arpStats.arp_matched; - pStats->arp_replied += pTarget->arpStats.arp_replied; - - if (ar->statsUpdatePending) { - ar->statsUpdatePending = false; - wake_up(&arEvent); - } - } -} - -void -ar6000_rssiThreshold_event(struct ar6_softc *ar, WMI_RSSI_THRESHOLD_VAL newThreshold, s16 rssi) -{ - USER_RSSI_THOLD userRssiThold; - - rssi = rssi + SIGNAL_QUALITY_NOISE_FLOOR; - - if (enablerssicompensation) { - rssi = rssi_compensation_calc(ar, rssi); - } - - /* Send an event to the app */ - userRssiThold.tag = ar->rssi_map[newThreshold].tag; - userRssiThold.rssi = rssi; - A_PRINTF("rssi Threshold range = %d tag = %d rssi = %d\n", newThreshold, - userRssiThold.tag, userRssiThold.rssi); -} - - -void -ar6000_hbChallengeResp_event(struct ar6_softc *ar, u32 cookie, u32 source) -{ - if (source != APP_HB_CHALLENGE) { - /* This would ignore the replys that come in after their due time */ - if (cookie == ar->arHBChallengeResp.seqNum) { - ar->arHBChallengeResp.outstanding = false; - } - } -} - - -void -ar6000_reportError_event(struct ar6_softc *ar, WMI_TARGET_ERROR_VAL errorVal) -{ - static const char * const errString[] = { - [WMI_TARGET_PM_ERR_FAIL] "WMI_TARGET_PM_ERR_FAIL", - [WMI_TARGET_KEY_NOT_FOUND] "WMI_TARGET_KEY_NOT_FOUND", - [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR", - [WMI_TARGET_BMISS] "WMI_TARGET_BMISS", - [WMI_PSDISABLE_NODE_JOIN] "WMI_PSDISABLE_NODE_JOIN" - }; - - A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal); - - /* One error is reported at a time, and errorval is a bitmask */ - if(errorVal & (errorVal - 1)) - return; - - A_PRINTF("AR6000 Error type = "); - switch(errorVal) - { - case WMI_TARGET_PM_ERR_FAIL: - case WMI_TARGET_KEY_NOT_FOUND: - case WMI_TARGET_DECRYPTION_ERR: - case WMI_TARGET_BMISS: - case WMI_PSDISABLE_NODE_JOIN: - A_PRINTF("%s\n", errString[errorVal]); - break; - default: - A_PRINTF("INVALID\n"); - break; - } - -} - - -void -ar6000_cac_event(struct ar6_softc *ar, u8 ac, u8 cacIndication, - u8 statusCode, u8 *tspecSuggestion) -{ - WMM_TSPEC_IE *tspecIe; - - /* - * This is the TSPEC IE suggestion from AP. - * Suggestion provided by AP under some error - * cases, could be helpful for the host app. - * Check documentation. - */ - tspecIe = (WMM_TSPEC_IE *)tspecSuggestion; - - /* - * What do we do, if we get TSPEC rejection? One thought - * that comes to mind is implictly delete the pstream... - */ - A_PRINTF("AR6000 CAC notification. " - "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n", - ac, cacIndication, statusCode); -} - -void -ar6000_channel_change_event(struct ar6_softc *ar, u16 oldChannel, - u16 newChannel) -{ - A_PRINTF("Channel Change notification\nOld Channel: %d, New Channel: %d\n", - oldChannel, newChannel); -} - -#define AR6000_PRINT_BSSID(_pBss) do { \ - A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\ - (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\ - (_pBss)[4],(_pBss)[5]); \ -} while(0) - -void -ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl) -{ - u8 i; - - A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n", - pTbl->numEntries, pTbl->roamMode); - for (i= 0; i < pTbl->numEntries; i++) { - A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i, - pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1], - pTbl->bssRoamInfo[i].bssid[2], - pTbl->bssRoamInfo[i].bssid[3], - pTbl->bssRoamInfo[i].bssid[4], - pTbl->bssRoamInfo[i].bssid[5]); - A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d" - " BIAS %d\n", - pTbl->bssRoamInfo[i].rssi, - pTbl->bssRoamInfo[i].rssidt, - pTbl->bssRoamInfo[i].last_rssi, - pTbl->bssRoamInfo[i].util, - pTbl->bssRoamInfo[i].roam_util, - pTbl->bssRoamInfo[i].bias); - } -} - -void -ar6000_wow_list_event(struct ar6_softc *ar, u8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply) -{ - u8 i,j; - - /*Each event now contains exactly one filter, see bug 26613*/ - A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num, wow_reply->num_filters); - A_PRINTF("wow mode = %s host mode = %s\n", - (wow_reply->wow_mode == 0? "disabled":"enabled"), - (wow_reply->host_mode == 1 ? "awake":"asleep")); - - - /*If there are no patterns, the reply will only contain generic - WoW information. Pattern information will exist only if there are - patterns present. Bug 26716*/ - - /* If this event contains pattern information, display it*/ - if (wow_reply->this_filter_num) { - i=0; - A_PRINTF("id=%d size=%d offset=%d\n", - wow_reply->wow_filters[i].wow_filter_id, - wow_reply->wow_filters[i].wow_filter_size, - wow_reply->wow_filters[i].wow_filter_offset); - A_PRINTF("wow pattern = "); - for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) { - A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]); - } - - A_PRINTF("\nwow mask = "); - for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) { - A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]); - } - A_PRINTF("\n"); - } -} - -/* - * Report the Roaming related data collected on the target - */ -void -ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p) -{ - A_PRINTF("Disconnect Data : BSSID: "); - AR6000_PRINT_BSSID(p->disassoc_bssid); - A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n", - p->disassoc_bss_rssi,p->disassoc_time, - p->no_txrx_time); - A_PRINTF("Connect Data: BSSID: "); - AR6000_PRINT_BSSID(p->assoc_bssid); - A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n", - p->assoc_bss_rssi,p->assoc_time, - p->allow_txrx_time); -} - -void -ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p) -{ - switch (p->roamDataType) { - case ROAM_DATA_TIME: - ar6000_display_roam_time(&p->u.roamTime); - break; - default: - break; - } -} - -void -ar6000_bssInfo_event_rx(struct ar6_softc *ar, u8 *datap, int len) -{ - struct sk_buff *skb; - WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap; - - - if (!ar->arMgmtFilter) { - return; - } - if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) && - (bih->frameType != BEACON_FTYPE)) || - ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) && - (bih->frameType != PROBERESP_FTYPE))) - { - return; - } - - if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) { - - A_NETBUF_PUT(skb, len); - memcpy(A_NETBUF_DATA(skb), datap, len); - skb->dev = ar->arNetDev; - memcpy(skb_mac_header(skb), A_NETBUF_DATA(skb), 6); - skb->ip_summed = CHECKSUM_NONE; - skb->pkt_type = PACKET_OTHERHOST; - skb->protocol = __constant_htons(0x0019); - netif_rx(skb); - } -} - -u32 wmiSendCmdNum; - -int -ar6000_control_tx(void *devt, void *osbuf, HTC_ENDPOINT_ID eid) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - int status = 0; - struct ar_cookie *cookie = NULL; - int i; -#ifdef CONFIG_PM - if (ar->arWowState != WLAN_WOW_STATE_NONE) { - A_NETBUF_FREE(osbuf); - return A_EACCES; - } -#endif /* CONFIG_PM */ - /* take lock to protect ar6000_alloc_cookie() */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - - do { - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar_contrstatus = ol_tx: skb=0x%lx, len=0x%x eid =%d\n", - (unsigned long)osbuf, A_NETBUF_LEN(osbuf), eid)); - - if (ar->arWMIControlEpFull && (eid == ar->arControlEp)) { - /* control endpoint is full, don't allocate resources, we - * are just going to drop this packet */ - cookie = NULL; - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" WMI Control EP full, dropping packet : 0x%lX, len:%d \n", - (unsigned long)osbuf, A_NETBUF_LEN(osbuf))); - } else { - cookie = ar6000_alloc_cookie(ar); - } - - if (cookie == NULL) { - status = A_NO_MEMORY; - break; - } - - if(logWmiRawMsgs) { - A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum); - for(i = 0; i < a_netbuf_to_len(osbuf); i++) - A_PRINTF("%x ", ((u8 *)a_netbuf_to_data(osbuf))[i]); - A_PRINTF("\n"); - } - - wmiSendCmdNum++; - - } while (false); - - if (cookie != NULL) { - /* got a structure to send it out on */ - ar->arTxPending[eid]++; - - if (eid != ar->arControlEp) { - ar->arTotalTxDataPending++; - } - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (cookie != NULL) { - cookie->arc_bp[0] = (unsigned long)osbuf; - cookie->arc_bp[1] = 0; - SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, - cookie, - A_NETBUF_DATA(osbuf), - A_NETBUF_LEN(osbuf), - eid, - AR6K_CONTROL_PKT_TAG); - /* this interface is asynchronous, if there is an error, cleanup will happen in the - * TX completion callback */ - HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); - status = 0; - } - - if (status) { - A_NETBUF_FREE(osbuf); - } - return status; -} - -/* indicate tx activity or inactivity on a WMI stream */ -void ar6000_indicate_tx_activity(void *devt, u8 TrafficClass, bool Active) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - HTC_ENDPOINT_ID eid ; - int i; - - if (ar->arWmiEnabled) { - eid = arAc2EndpointID(ar, TrafficClass); - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - ar->arAcStreamActive[TrafficClass] = Active; - - if (Active) { - /* when a stream goes active, keep track of the active stream with the highest priority */ - - if (ar->arAcStreamPriMap[TrafficClass] > ar->arHiAcStreamActivePri) { - /* set the new highest active priority */ - ar->arHiAcStreamActivePri = ar->arAcStreamPriMap[TrafficClass]; - } - - } else { - /* when a stream goes inactive, we may have to search for the next active stream - * that is the highest priority */ - - if (ar->arHiAcStreamActivePri == ar->arAcStreamPriMap[TrafficClass]) { - - /* the highest priority stream just went inactive */ - - /* reset and search for the "next" highest "active" priority stream */ - ar->arHiAcStreamActivePri = 0; - for (i = 0; i < WMM_NUM_AC; i++) { - if (ar->arAcStreamActive[i]) { - if (ar->arAcStreamPriMap[i] > ar->arHiAcStreamActivePri) { - /* set the new highest active priority */ - ar->arHiAcStreamActivePri = ar->arAcStreamPriMap[i]; - } - } - } - } - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - } else { - /* for mbox ping testing, the traffic class is mapped directly as a stream ID, - * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c - * convert the stream ID to a endpoint */ - eid = arAc2EndpointID(ar, TrafficClass); - } - - /* notify HTC, this may cause credit distribution changes */ - - HTCIndicateActivityChange(ar->arHtcTarget, - eid, - Active); - -} - -void -ar6000_btcoex_config_event(struct ar6_softc *ar, u8 *ptr, u32 len) -{ - - WMI_BTCOEX_CONFIG_EVENT *pBtcoexConfig = (WMI_BTCOEX_CONFIG_EVENT *)ptr; - WMI_BTCOEX_CONFIG_EVENT *pArbtcoexConfig =&ar->arBtcoexConfig; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 BTCOEX CONFIG EVENT \n")); - - A_PRINTF("received config event\n"); - pArbtcoexConfig->btProfileType = pBtcoexConfig->btProfileType; - pArbtcoexConfig->linkId = pBtcoexConfig->linkId; - - switch (pBtcoexConfig->btProfileType) { - case WMI_BTCOEX_BT_PROFILE_SCO: - memcpy(&pArbtcoexConfig->info.scoConfigCmd, &pBtcoexConfig->info.scoConfigCmd, - sizeof(WMI_SET_BTCOEX_SCO_CONFIG_CMD)); - break; - case WMI_BTCOEX_BT_PROFILE_A2DP: - memcpy(&pArbtcoexConfig->info.a2dpConfigCmd, &pBtcoexConfig->info.a2dpConfigCmd, - sizeof(WMI_SET_BTCOEX_A2DP_CONFIG_CMD)); - break; - case WMI_BTCOEX_BT_PROFILE_ACLCOEX: - memcpy(&pArbtcoexConfig->info.aclcoexConfig, &pBtcoexConfig->info.aclcoexConfig, - sizeof(WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD)); - break; - case WMI_BTCOEX_BT_PROFILE_INQUIRY_PAGE: - memcpy(&pArbtcoexConfig->info.btinquiryPageConfigCmd, &pBtcoexConfig->info.btinquiryPageConfigCmd, - sizeof(WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD)); - break; - } - if (ar->statsUpdatePending) { - ar->statsUpdatePending = false; - wake_up(&arEvent); - } -} - -void -ar6000_btcoex_stats_event(struct ar6_softc *ar, u8 *ptr, u32 len) -{ - WMI_BTCOEX_STATS_EVENT *pBtcoexStats = (WMI_BTCOEX_STATS_EVENT *)ptr; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 BTCOEX CONFIG EVENT \n")); - - memcpy(&ar->arBtcoexStats, pBtcoexStats, sizeof(WMI_BTCOEX_STATS_EVENT)); - - if (ar->statsUpdatePending) { - ar->statsUpdatePending = false; - wake_up(&arEvent); - } - -} -module_init(ar6000_init_module); -module_exit(ar6000_cleanup_module); - -/* Init cookie queue */ -static void -ar6000_cookie_init(struct ar6_softc *ar) -{ - u32 i; - - ar->arCookieList = NULL; - ar->arCookieCount = 0; - - A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem)); - - for (i = 0; i < MAX_COOKIE_NUM; i++) { - ar6000_free_cookie(ar, &s_ar_cookie_mem[i]); - } -} - -/* cleanup cookie queue */ -static void -ar6000_cookie_cleanup(struct ar6_softc *ar) -{ - /* It is gone .... */ - ar->arCookieList = NULL; - ar->arCookieCount = 0; -} - -/* Init cookie queue */ -static void -ar6000_free_cookie(struct ar6_softc *ar, struct ar_cookie * cookie) -{ - /* Insert first */ - A_ASSERT(ar != NULL); - A_ASSERT(cookie != NULL); - - cookie->arc_list_next = ar->arCookieList; - ar->arCookieList = cookie; - ar->arCookieCount++; -} - -/* cleanup cookie queue */ -static struct ar_cookie * -ar6000_alloc_cookie(struct ar6_softc *ar) -{ - struct ar_cookie *cookie; - - cookie = ar->arCookieList; - if(cookie != NULL) - { - ar->arCookieList = cookie->arc_list_next; - ar->arCookieCount--; - } - - return cookie; -} - -void -ar6000_tx_retry_err_event(void *devt) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Tx retries reach maximum!\n")); -} - -void -ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, u8 snr) -{ - WMI_SNR_THRESHOLD_EVENT event; - - event.range = newThreshold; - event.snr = snr; -} - -void -ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, u8 lq) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("lq threshold range %d, lq %d\n", newThreshold, lq)); -} - - - -u32 a_copy_to_user(void *to, const void *from, u32 n) -{ - return(copy_to_user(to, from, n)); -} - -u32 a_copy_from_user(void *to, const void *from, u32 n) -{ - return(copy_from_user(to, from, n)); -} - - -int -ar6000_get_driver_cfg(struct net_device *dev, - u16 cfgParam, - void *result) -{ - - int ret = 0; - - switch(cfgParam) - { - case AR6000_DRIVER_CFG_GET_WLANNODECACHING: - *((u32 *)result) = wlanNodeCaching; - break; - case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS: - *((u32 *)result) = logWmiRawMsgs; - break; - default: - ret = EINVAL; - break; - } - - return ret; -} - -void -ar6000_keepalive_rx(void *devt, u8 configured) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - ar->arKeepaliveConfigured = configured; - wake_up(&arEvent); -} - -void -ar6000_pmkid_list_event(void *devt, u8 numPMKID, WMI_PMKID *pmkidList, - u8 *bssidList) -{ - u8 i, j; - - A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID); - - for (i = 0; i < numPMKID; i++) { - A_PRINTF("\nBSSID %d ", i); - for (j = 0; j < ATH_MAC_LEN; j++) { - A_PRINTF("%2.2x", bssidList[j]); - } - bssidList += (ATH_MAC_LEN + WMI_PMKID_LEN); - A_PRINTF("\nPMKID %d ", i); - for (j = 0; j < WMI_PMKID_LEN; j++) { - A_PRINTF("%2.2x", pmkidList->pmkid[j]); - } - pmkidList = (WMI_PMKID *)((u8 *)pmkidList + ATH_MAC_LEN + - WMI_PMKID_LEN); - } -} - -void ar6000_pspoll_event(struct ar6_softc *ar,u8 aid) -{ - sta_t *conn=NULL; - bool isPsqEmpty = false; - - conn = ieee80211_find_conn_for_aid(ar, aid); - - /* If the PS q for this STA is not empty, dequeue and send a pkt from - * the head of the q. Also update the More data bit in the WMI_DATA_HDR - * if there are more pkts for this STA in the PS q. If there are no more - * pkts for this STA, update the PVB for this STA. - */ - A_MUTEX_LOCK(&conn->psqLock); - isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq); - A_MUTEX_UNLOCK(&conn->psqLock); - - if (isPsqEmpty) { - /* TODO:No buffered pkts for this STA. Send out a NULL data frame */ - } else { - struct sk_buff *skb = NULL; - - A_MUTEX_LOCK(&conn->psqLock); - skb = A_NETBUF_DEQUEUE(&conn->psq); - A_MUTEX_UNLOCK(&conn->psqLock); - /* Set the STA flag to PSPolled, so that the frame will go out */ - STA_SET_PS_POLLED(conn); - ar6000_data_tx(skb, ar->arNetDev); - STA_CLR_PS_POLLED(conn); - - /* Clear the PVB for this STA if the queue has become empty */ - A_MUTEX_LOCK(&conn->psqLock); - isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq); - A_MUTEX_UNLOCK(&conn->psqLock); - - if (isPsqEmpty) { - wmi_set_pvb_cmd(ar->arWmi, conn->aid, 0); - } - } -} - -void ar6000_dtimexpiry_event(struct ar6_softc *ar) -{ - bool isMcastQueued = false; - struct sk_buff *skb = NULL; - - /* If there are no associated STAs, ignore the DTIM expiry event. - * There can be potential race conditions where the last associated - * STA may disconnect & before the host could clear the 'Indicate DTIM' - * request to the firmware, the firmware would have just indicated a DTIM - * expiry event. The race is between 'clear DTIM expiry cmd' going - * from the host to the firmware & the DTIM expiry event happening from - * the firmware to the host. - */ - if (ar->sta_list_index == 0) { - return; - } - - A_MUTEX_LOCK(&ar->mcastpsqLock); - isMcastQueued = A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq); - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - A_ASSERT(isMcastQueued == false); - - /* Flush the mcast psq to the target */ - /* Set the STA flag to DTIMExpired, so that the frame will go out */ - ar->DTIMExpired = true; - - A_MUTEX_LOCK(&ar->mcastpsqLock); - while (!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) { - skb = A_NETBUF_DEQUEUE(&ar->mcastpsq); - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - ar6000_data_tx(skb, ar->arNetDev); - - A_MUTEX_LOCK(&ar->mcastpsqLock); - } - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - /* Reset the DTIMExpired flag back to 0 */ - ar->DTIMExpired = false; - - /* Clear the LSB of the BitMapCtl field of the TIM IE */ - wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 0); -} - -void -read_rssi_compensation_param(struct ar6_softc *ar) -{ - u8 *cust_data_ptr; - -//#define RSSICOMPENSATION_PRINT - -#ifdef RSSICOMPENSATION_PRINT - s16 i; - cust_data_ptr = ar6000_get_cust_data_buffer(ar->arTargetType); - for (i=0; i<16; i++) { - A_PRINTF("cust_data_%d = %x \n", i, *(u8 *)cust_data_ptr); - cust_data_ptr += 1; - } -#endif - - cust_data_ptr = ar6000_get_cust_data_buffer(ar->arTargetType); - - rssi_compensation_param.customerID = *(u16 *)cust_data_ptr & 0xffff; - rssi_compensation_param.enable = *(u16 *)(cust_data_ptr+2) & 0xffff; - rssi_compensation_param.bg_param_a = *(u16 *)(cust_data_ptr+4) & 0xffff; - rssi_compensation_param.bg_param_b = *(u16 *)(cust_data_ptr+6) & 0xffff; - rssi_compensation_param.a_param_a = *(u16 *)(cust_data_ptr+8) & 0xffff; - rssi_compensation_param.a_param_b = *(u16 *)(cust_data_ptr+10) &0xffff; - rssi_compensation_param.reserved = *(u32 *)(cust_data_ptr+12); - -#ifdef RSSICOMPENSATION_PRINT - A_PRINTF("customerID = 0x%x \n", rssi_compensation_param.customerID); - A_PRINTF("enable = 0x%x \n", rssi_compensation_param.enable); - A_PRINTF("bg_param_a = 0x%x and %d \n", rssi_compensation_param.bg_param_a, rssi_compensation_param.bg_param_a); - A_PRINTF("bg_param_b = 0x%x and %d \n", rssi_compensation_param.bg_param_b, rssi_compensation_param.bg_param_b); - A_PRINTF("a_param_a = 0x%x and %d \n", rssi_compensation_param.a_param_a, rssi_compensation_param.a_param_a); - A_PRINTF("a_param_b = 0x%x and %d \n", rssi_compensation_param.a_param_b, rssi_compensation_param.a_param_b); - A_PRINTF("Last 4 bytes = 0x%x \n", rssi_compensation_param.reserved); -#endif - - if (rssi_compensation_param.enable != 0x1) { - rssi_compensation_param.enable = 0; - } - - return; -} - -s32 rssi_compensation_calc_tcmd(u32 freq, s32 rssi, u32 totalPkt) -{ - - if (freq > 5000) - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d, totalPkt = %d\n", rssi,totalPkt)); - rssi = rssi * rssi_compensation_param.a_param_a + totalPkt * rssi_compensation_param.a_param_b; - rssi = (rssi-50) /100; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi)); - } - } - else - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d, totalPkt = %d\n", rssi,totalPkt)); - rssi = rssi * rssi_compensation_param.bg_param_a + totalPkt * rssi_compensation_param.bg_param_b; - rssi = (rssi-50) /100; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi)); - } - } - - return rssi; -} - -s16 rssi_compensation_calc(struct ar6_softc *ar, s16 rssi) -{ - if (ar->arBssChannel > 5000) - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d\n", rssi)); - rssi = rssi * rssi_compensation_param.a_param_a + rssi_compensation_param.a_param_b; - rssi = (rssi-50) /100; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi)); - } - } - else - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d\n", rssi)); - rssi = rssi * rssi_compensation_param.bg_param_a + rssi_compensation_param.bg_param_b; - rssi = (rssi-50) /100; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi)); - } - } - - return rssi; -} - -s16 rssi_compensation_reverse_calc(struct ar6_softc *ar, s16 rssi, bool Above) -{ - s16 i; - - if (ar->arBssChannel > 5000) - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before rev compensation = %d\n", rssi)); - rssi = rssi * 100; - rssi = (rssi - rssi_compensation_param.a_param_b) / rssi_compensation_param.a_param_a; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after rev compensation = %d\n", rssi)); - } - } - else - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before rev compensation = %d\n", rssi)); - - if (Above) { - for (i=95; i>=0; i--) { - if (rssi <= rssi_compensation_table[i]) { - rssi = 0 - i; - break; - } - } - } else { - for (i=0; i<=95; i++) { - if (rssi >= rssi_compensation_table[i]) { - rssi = 0 - i; - break; - } - } - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after rev compensation = %d\n", rssi)); - } - } - - return rssi; -} - -#ifdef WAPI_ENABLE -void ap_wapi_rekey_event(struct ar6_softc *ar, u8 type, u8 *mac) -{ - union iwreq_data wrqu; - char buf[20]; - - A_MEMZERO(buf, sizeof(buf)); - - strcpy(buf, "WAPI_REKEY"); - buf[10] = type; - memcpy(&buf[11], mac, ATH_MAC_LEN); - - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.data.length = 10+1+ATH_MAC_LEN; - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); - - A_PRINTF("WAPI REKEY - %d - %02x:%02x\n", type, mac[4], mac[5]); -} -#endif - -static int -ar6000_reinstall_keys(struct ar6_softc *ar, u8 key_op_ctrl) -{ - int status = 0; - struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik; - struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik; - CRYPTO_TYPE keyType = ar->user_saved_keys.keyType; - - if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) { - if (NONE_CRYPT == keyType) { - goto _reinstall_keys_out; - } - - if (uik->ik_keylen) { - status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix, - ar->user_saved_keys.keyType, PAIRWISE_USAGE, - uik->ik_keylen, (u8 *)&uik->ik_keyrsc, - uik->ik_keydata, key_op_ctrl, uik->ik_macaddr, SYNC_BEFORE_WMIFLAG); - } - - } else { - status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata); - } - - if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) { - if (NONE_CRYPT == keyType) { - goto _reinstall_keys_out; - } - - if (bik->ik_keylen) { - status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix, - ar->user_saved_keys.keyType, GROUP_USAGE, - bik->ik_keylen, (u8 *)&bik->ik_keyrsc, - bik->ik_keydata, key_op_ctrl, bik->ik_macaddr, NO_SYNC_WMIFLAG); - } - } else { - status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata); - } - -_reinstall_keys_out: - ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; - ar->user_key_ctrl = 0; - - return status; -} - - -void -ar6000_dset_open_req( - void *context, - u32 id, - u32 targHandle, - u32 targReplyFn, - u32 targReplyArg) -{ -} - -void -ar6000_dset_close( - void *context, - u32 access_cookie) -{ - return; -} - -void -ar6000_dset_data_req( - void *context, - u32 accessCookie, - u32 offset, - u32 length, - u32 targBuf, - u32 targReplyFn, - u32 targReplyArg) -{ -} - -int -ar6000_ap_mode_profile_commit(struct ar6_softc *ar) -{ - WMI_CONNECT_CMD p; - unsigned long flags; - - /* No change in AP's profile configuration */ - if(ar->ap_profile_flag==0) { - A_PRINTF("COMMIT: No change in profile!!!\n"); - return -ENODATA; - } - - if(!ar->arSsidLen) { - A_PRINTF("SSID not set!!!\n"); - return -ECHRNG; - } - - switch(ar->arAuthMode) { - case NONE_AUTH: - if((ar->arPairwiseCrypto != NONE_CRYPT) && -#ifdef WAPI_ENABLE - (ar->arPairwiseCrypto != WAPI_CRYPT) && -#endif - (ar->arPairwiseCrypto != WEP_CRYPT)) { - A_PRINTF("Cipher not supported in AP mode Open auth\n"); - return -EOPNOTSUPP; - } - break; - case WPA_PSK_AUTH: - case WPA2_PSK_AUTH: - case (WPA_PSK_AUTH|WPA2_PSK_AUTH): - break; - default: - A_PRINTF("This key mgmt type not supported in AP mode\n"); - return -EOPNOTSUPP; - } - - /* Update the arNetworkType */ - ar->arNetworkType = ar->arNextMode; - - A_MEMZERO(&p,sizeof(p)); - p.ssidLength = ar->arSsidLen; - memcpy(p.ssid,ar->arSsid,p.ssidLength); - p.channel = ar->arChannelHint; - p.networkType = ar->arNetworkType; - - p.dot11AuthMode = ar->arDot11AuthMode; - p.authMode = ar->arAuthMode; - p.pairwiseCryptoType = ar->arPairwiseCrypto; - p.pairwiseCryptoLen = ar->arPairwiseCryptoLen; - p.groupCryptoType = ar->arGroupCrypto; - p.groupCryptoLen = ar->arGroupCryptoLen; - p.ctrl_flags = ar->arConnectCtrlFlags; - - wmi_ap_profile_commit(ar->arWmi, &p); - spin_lock_irqsave(&ar->arLock, flags); - ar->arConnected = true; - netif_carrier_on(ar->arNetDev); - spin_unlock_irqrestore(&ar->arLock, flags); - ar->ap_profile_flag = 0; - return 0; -} - -int -ar6000_connect_to_ap(struct ar6_softc *ar) -{ - /* The ssid length check prevents second "essid off" from the user, - to be treated as a connect cmd. The second "essid off" is ignored. - */ - if((ar->arWmiReady == true) && (ar->arSsidLen > 0) && ar->arNetworkType!=AP_NETWORK) - { - int status; - if((ADHOC_NETWORK != ar->arNetworkType) && - (NONE_AUTH==ar->arAuthMode) && - (WEP_CRYPT==ar->arPairwiseCrypto)) { - ar6000_install_static_wep_keys(ar); - } - - if (!ar->arUserBssFilter) { - if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != 0) { - return -EIO; - } - } -#ifdef WAPI_ENABLE - if (ar->arWapiEnable) { - ar->arPairwiseCrypto = WAPI_CRYPT; - ar->arPairwiseCryptoLen = 0; - ar->arGroupCrypto = WAPI_CRYPT; - ar->arGroupCryptoLen = 0; - ar->arAuthMode = NONE_AUTH; - ar->arConnectCtrlFlags |= CONNECT_IGNORE_WPAx_GROUP_CIPHER; - } -#endif - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("Connect called with authmode %d dot11 auth %d"\ - " PW crypto %d PW crypto Len %d GRP crypto %d"\ - " GRP crypto Len %d\n", - ar->arAuthMode, ar->arDot11AuthMode, - ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, - ar->arGroupCrypto, ar->arGroupCryptoLen)); - reconnect_flag = 0; - /* Set the listen interval into 1000TUs or more. This value will be indicated to Ap in the conn. - later set it back locally at the STA to 100/1000 TUs depending on the power mode */ - if ((ar->arNetworkType == INFRA_NETWORK)) { - wmi_listeninterval_cmd(ar->arWmi, max(ar->arListenIntervalT, (u16)A_MAX_WOW_LISTEN_INTERVAL), 0); - } - status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType, - ar->arDot11AuthMode, ar->arAuthMode, - ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, - ar->arGroupCrypto,ar->arGroupCryptoLen, - ar->arSsidLen, ar->arSsid, - ar->arReqBssid, ar->arChannelHint, - ar->arConnectCtrlFlags); - if (status) { - wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB); - if (!ar->arUserBssFilter) { - wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0); - } - return status; - } - - if ((!(ar->arConnectCtrlFlags & CONNECT_DO_WPA_OFFLOAD)) && - ((WPA_PSK_AUTH == ar->arAuthMode) || (WPA2_PSK_AUTH == ar->arAuthMode))) - { - A_TIMEOUT_MS(&ar->disconnect_timer, A_DISCONNECT_TIMER_INTERVAL, 0); - } - - ar->arConnectCtrlFlags &= ~CONNECT_DO_WPA_OFFLOAD; - - ar->arConnectPending = true; - return status; - } - return A_ERROR; -} - -int -ar6000_disconnect(struct ar6_softc *ar) -{ - if ((ar->arConnected == true) || (ar->arConnectPending == true)) { - wmi_disconnect_cmd(ar->arWmi); - /* - * Disconnect cmd is issued, clear connectPending. - * arConnected will be cleard in disconnect_event notification. - */ - ar->arConnectPending = false; - } - - return 0; -} - -int -ar6000_ap_mode_get_wpa_ie(struct ar6_softc *ar, struct ieee80211req_wpaie *wpaie) -{ - sta_t *conn = NULL; - conn = ieee80211_find_conn(ar, wpaie->wpa_macaddr); - - A_MEMZERO(wpaie->wpa_ie, IEEE80211_MAX_IE); - A_MEMZERO(wpaie->rsn_ie, IEEE80211_MAX_IE); - - if(conn) { - memcpy(wpaie->wpa_ie, conn->wpa_ie, IEEE80211_MAX_IE); - } - - return 0; -} - -int -is_iwioctl_allowed(u8 mode, u16 cmd) -{ - if(cmd >= SIOCSIWCOMMIT && cmd <= SIOCGIWPOWER) { - cmd -= SIOCSIWCOMMIT; - if(sioctl_filter[cmd] == 0xFF) return 0; - if(sioctl_filter[cmd] & mode) return 0; - } else if(cmd >= SIOCIWFIRSTPRIV && cmd <= (SIOCIWFIRSTPRIV+30)) { - cmd -= SIOCIWFIRSTPRIV; - if(pioctl_filter[cmd] == 0xFF) return 0; - if(pioctl_filter[cmd] & mode) return 0; - } else { - return A_ERROR; - } - return A_ENOTSUP; -} - -int -is_xioctl_allowed(u8 mode, int cmd) -{ - if(sizeof(xioctl_filter)-1 < cmd) { - A_PRINTF("Filter for this cmd=%d not defined\n",cmd); - return 0; - } - if(xioctl_filter[cmd] == 0xFF) return 0; - if(xioctl_filter[cmd] & mode) return 0; - return A_ERROR; -} - -#ifdef WAPI_ENABLE -int -ap_set_wapi_key(struct ar6_softc *ar, void *ikey) -{ - struct ieee80211req_key *ik = (struct ieee80211req_key *)ikey; - KEY_USAGE keyUsage = 0; - int status; - - if (memcmp(ik->ik_macaddr, bcast_mac, IEEE80211_ADDR_LEN) == 0) { - keyUsage = GROUP_USAGE; - } else { - keyUsage = PAIRWISE_USAGE; - } - A_PRINTF("WAPI_KEY: Type:%d ix:%d mac:%02x:%02x len:%d\n", - keyUsage, ik->ik_keyix, ik->ik_macaddr[4], ik->ik_macaddr[5], - ik->ik_keylen); - - status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, WAPI_CRYPT, keyUsage, - ik->ik_keylen, (u8 *)&ik->ik_keyrsc, - ik->ik_keydata, KEY_OP_INIT_VAL, ik->ik_macaddr, - SYNC_BOTH_WMIFLAG); - - if (0 != status) { - return -EIO; - } - return 0; -} -#endif - -void ar6000_peer_event( - void *context, - u8 eventCode, - u8 *macAddr) -{ - u8 pos; - - for (pos=0;pos<6;pos++) - printk("%02x: ",*(macAddr+pos)); - printk("\n"); -} - -#ifdef HTC_TEST_SEND_PKTS -#define HTC_TEST_DUPLICATE 8 -static void DoHTCSendPktsTest(struct ar6_softc *ar, int MapNo, HTC_ENDPOINT_ID eid, struct sk_buff *dupskb) -{ - struct ar_cookie *cookie; - struct ar_cookie *cookieArray[HTC_TEST_DUPLICATE]; - struct sk_buff *new_skb; - int i; - int pkts = 0; - struct htc_packet_queue pktQueue; - EPPING_HEADER *eppingHdr; - - eppingHdr = A_NETBUF_DATA(dupskb); - - if (eppingHdr->Cmd_h == EPPING_CMD_NO_ECHO) { - /* skip test if this is already a tx perf test */ - return; - } - - for (i = 0; i < HTC_TEST_DUPLICATE; i++,pkts++) { - AR6000_SPIN_LOCK(&ar->arLock, 0); - cookie = ar6000_alloc_cookie(ar); - if (cookie != NULL) { - ar->arTxPending[eid]++; - ar->arTotalTxDataPending++; - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (NULL == cookie) { - break; - } - - new_skb = A_NETBUF_ALLOC(A_NETBUF_LEN(dupskb)); - - if (new_skb == NULL) { - AR6000_SPIN_LOCK(&ar->arLock, 0); - ar6000_free_cookie(ar,cookie); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - break; - } - - A_NETBUF_PUT_DATA(new_skb, A_NETBUF_DATA(dupskb), A_NETBUF_LEN(dupskb)); - cookie->arc_bp[0] = (unsigned long)new_skb; - cookie->arc_bp[1] = MapNo; - SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, - cookie, - A_NETBUF_DATA(new_skb), - A_NETBUF_LEN(new_skb), - eid, - AR6K_DATA_PKT_TAG); - - cookieArray[i] = cookie; - - { - EPPING_HEADER *pHdr = (EPPING_HEADER *)A_NETBUF_DATA(new_skb); - pHdr->Cmd_h = EPPING_CMD_NO_ECHO; /* do not echo the packet */ - } - } - - if (pkts == 0) { - return; - } - - INIT_HTC_PACKET_QUEUE(&pktQueue); - - for (i = 0; i < pkts; i++) { - HTC_PACKET_ENQUEUE(&pktQueue,&cookieArray[i]->HtcPkt); - } - - HTCSendPktsMultiple(ar->arHtcTarget, &pktQueue); - -} -#endif - -#ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT -/* - * Add support for adding and removing a virtual adapter for soft AP. - * Some OS requires different adapters names for station and soft AP mode. - * To support these requirement, create and destroy a netdevice instance - * when the AP mode is operational. A full fledged support for virual device - * is not implemented. Rather a virtual interface is created and is linked - * with the existing physical device instance during the operation of the - * AP mode. - */ - -int ar6000_start_ap_interface(struct ar6_softc *ar) -{ - struct ar_virtual_interface *arApDev; - - /* Change net_device to point to AP instance */ - arApDev = (struct ar_virtual_interface *)ar->arApDev; - ar->arNetDev = arApDev->arNetDev; - - return 0; -} - -int ar6000_stop_ap_interface(struct ar6_softc *ar) -{ - struct ar_virtual_interface *arApDev; - - /* Change net_device to point to sta instance */ - arApDev = (struct ar_virtual_interface *)ar->arApDev; - if (arApDev) { - ar->arNetDev = arApDev->arStaNetDev; - } - - return 0; -} - - -int ar6000_create_ap_interface(struct ar6_softc *ar, char *ap_ifname) -{ - struct net_device *dev; - struct ar_virtual_interface *arApDev; - - dev = alloc_etherdev(sizeof(struct ar_virtual_interface)); - if (dev == NULL) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: can't alloc etherdev\n")); - return A_ERROR; - } - - ether_setup(dev); - init_netdev(dev, ap_ifname); - dev->priv_flags &= ~IFF_TX_SKB_SHARING; - - if (register_netdev(dev)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: register_netdev failed\n")); - return A_ERROR; - } - - arApDev = netdev_priv(dev); - arApDev->arDev = ar; - arApDev->arNetDev = dev; - arApDev->arStaNetDev = ar->arNetDev; - - ar->arApDev = arApDev; - arApNetDev = dev; - - /* Copy the MAC address */ - memcpy(dev->dev_addr, ar->arNetDev->dev_addr, AR6000_ETH_ADDR_LEN); - - return 0; -} - -int ar6000_add_ap_interface(struct ar6_softc *ar, char *ap_ifname) -{ - /* Interface already added, need not proceed further */ - if (ar->arApDev != NULL) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_add_ap_interface: interface already present \n")); - return 0; - } - - if (ar6000_create_ap_interface(ar, ap_ifname) != 0) { - return A_ERROR; - } - - A_PRINTF("Add AP interface %s \n",ap_ifname); - - return ar6000_start_ap_interface(ar); -} - -int ar6000_remove_ap_interface(struct ar6_softc *ar) -{ - if (arApNetDev) { - ar6000_stop_ap_interface(ar); - - unregister_netdev(arApNetDev); - free_netdev(apApNetDev); - - A_PRINTF("Remove AP interface\n"); - } - ar->arApDev = NULL; - arApNetDev = NULL; - - - return 0; -} -#endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -EXPORT_SYMBOL(setupbtdev); -#endif diff --git a/drivers/staging/ath6kl/os/linux/ar6000_pm.c b/drivers/staging/ath6kl/os/linux/ar6000_pm.c deleted file mode 100644 index 1e0ace8b6d1..00000000000 --- a/drivers/staging/ath6kl/os/linux/ar6000_pm.c +++ /dev/null @@ -1,626 +0,0 @@ -/* - * - * Copyright (c) 2004-2010 Atheros Communications Inc. - * All rights reserved. - * - * -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// - * - */ - -/* - * Implementation of system power management - */ - -#include "ar6000_drv.h" -#include <linux/inetdevice.h> -#include <linux/platform_device.h> -#include "wlan_config.h" - -#define WOW_ENABLE_MAX_INTERVAL 0 -#define WOW_SET_SCAN_PARAMS 0 - -extern unsigned int wmitimeout; -extern wait_queue_head_t arEvent; - -#undef ATH_MODULE_NAME -#define ATH_MODULE_NAME pm -#define ATH_DEBUG_PM ATH_DEBUG_MAKE_MODULE_MASK(0) - -#ifdef DEBUG -static struct ath_debug_mask_description pm_debug_desc[] = { - { ATH_DEBUG_PM , "System power management"}, -}; - -ATH_DEBUG_INSTANTIATE_MODULE_VAR(pm, - "pm", - "System Power Management", - ATH_DEBUG_MASK_DEFAULTS | ATH_DEBUG_PM, - ATH_DEBUG_DESCRIPTION_COUNT(pm_debug_desc), - pm_debug_desc); - -#endif /* DEBUG */ - -int ar6000_exit_cut_power_state(struct ar6_softc *ar); - -#ifdef CONFIG_PM -static void ar6k_send_asleep_event_to_app(struct ar6_softc *ar, bool asleep) -{ - char buf[128]; - union iwreq_data wrqu; - - snprintf(buf, sizeof(buf), "HOST_ASLEEP=%s", asleep ? "asleep" : "awake"); - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -} - -static void ar6000_wow_resume(struct ar6_softc *ar) -{ - if (ar->arWowState!= WLAN_WOW_STATE_NONE) { - u16 fg_start_period = (ar->scParams.fg_start_period==0) ? 1 : ar->scParams.fg_start_period; - u16 bg_period = (ar->scParams.bg_period==0) ? 60 : ar->scParams.bg_period; - WMI_SET_HOST_SLEEP_MODE_CMD hostSleepMode = {true, false}; - ar->arWowState = WLAN_WOW_STATE_NONE; - if (wmi_set_host_sleep_mode_cmd(ar->arWmi, &hostSleepMode)!= 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to setup restore host awake\n")); - } -#if WOW_SET_SCAN_PARAMS - wmi_scanparams_cmd(ar->arWmi, fg_start_period, - ar->scParams.fg_end_period, - bg_period, - ar->scParams.minact_chdwell_time, - ar->scParams.maxact_chdwell_time, - ar->scParams.pas_chdwell_time, - ar->scParams.shortScanRatio, - ar->scParams.scanCtrlFlags, - ar->scParams.max_dfsch_act_time, - ar->scParams.maxact_scan_per_ssid); -#else - (void)fg_start_period; - (void)bg_period; -#endif - - -#if WOW_ENABLE_MAX_INTERVAL /* we don't do it if the power consumption is already good enough. */ - if (wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB) == 0) { - } -#endif - ar6k_send_asleep_event_to_app(ar, false); - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("Resume WoW successfully\n")); - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("WoW does not invoked. skip resume")); - } - ar->arWlanPowerState = WLAN_POWER_STATE_ON; -} - -static void ar6000_wow_suspend(struct ar6_softc *ar) -{ -#define WOW_LIST_ID 1 - if (ar->arNetworkType != AP_NETWORK) { - /* Setup WoW for unicast & Arp request for our own IP - disable background scan. Set listen interval into 1000 TUs - Enable keepliave for 110 seconds - */ - struct in_ifaddr **ifap = NULL; - struct in_ifaddr *ifa = NULL; - struct in_device *in_dev; - u8 macMask[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - int status; - WMI_ADD_WOW_PATTERN_CMD addWowCmd = { .filter = { 0 } }; - WMI_DEL_WOW_PATTERN_CMD delWowCmd; - WMI_SET_HOST_SLEEP_MODE_CMD hostSleepMode = {false, true}; - WMI_SET_WOW_MODE_CMD wowMode = { .enable_wow = true, - .hostReqDelay = 500 };/*500 ms delay*/ - - if (ar->arWowState!= WLAN_WOW_STATE_NONE) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("System already go into wow mode!\n")); - return; - } - - ar6000_TxDataCleanup(ar); /* IMPORTANT, otherwise there will be 11mA after listen interval as 1000*/ - -#if WOW_ENABLE_MAX_INTERVAL /* we don't do it if the power consumption is already good enough. */ - if (wmi_listeninterval_cmd(ar->arWmi, A_MAX_WOW_LISTEN_INTERVAL, 0) == 0) { - } -#endif - -#if WOW_SET_SCAN_PARAMS - status = wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, 0xFFFF, 0, 0, 0, 0, 0, 0, 0); -#endif - /* clear up our WoW pattern first */ - delWowCmd.filter_list_id = WOW_LIST_ID; - delWowCmd.filter_id = 0; - wmi_del_wow_pattern_cmd(ar->arWmi, &delWowCmd); - - /* setup unicast packet pattern for WoW */ - if (ar->arNetDev->dev_addr[1]) { - addWowCmd.filter_list_id = WOW_LIST_ID; - addWowCmd.filter_size = 6; /* MAC address */ - addWowCmd.filter_offset = 0; - status = wmi_add_wow_pattern_cmd(ar->arWmi, &addWowCmd, ar->arNetDev->dev_addr, macMask, addWowCmd.filter_size); - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to add WoW pattern\n")); - } - } - /* setup ARP request for our own IP */ - if ((in_dev = __in_dev_get_rtnl(ar->arNetDev)) != NULL) { - for (ifap = &in_dev->ifa_list; (ifa = *ifap) != NULL; ifap = &ifa->ifa_next) { - if (!strcmp(ar->arNetDev->name, ifa->ifa_label)) { - break; /* found */ - } - } - } - if (ifa && ifa->ifa_local) { - WMI_SET_IP_CMD ipCmd; - memset(&ipCmd, 0, sizeof(ipCmd)); - ipCmd.ips[0] = ifa->ifa_local; - status = wmi_set_ip_cmd(ar->arWmi, &ipCmd); - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to setup IP for ARP agent\n")); - } - } - -#ifndef ATH6K_CONFIG_OTA_MODE - wmi_powermode_cmd(ar->arWmi, REC_POWER); -#endif - - status = wmi_set_wow_mode_cmd(ar->arWmi, &wowMode); - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to enable wow mode\n")); - } - ar6k_send_asleep_event_to_app(ar, true); - - status = wmi_set_host_sleep_mode_cmd(ar->arWmi, &hostSleepMode); - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to set host asleep\n")); - } - - ar->arWowState = WLAN_WOW_STATE_SUSPENDING; - if (ar->arTxPending[ar->arControlEp]) { - u32 timeleft = wait_event_interruptible_timeout(arEvent, - ar->arTxPending[ar->arControlEp] == 0, wmitimeout * HZ); - if (!timeleft || signal_pending(current)) { - /* what can I do? wow resume at once */ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to setup WoW. Pending wmi control data %d\n", ar->arTxPending[ar->arControlEp])); - } - } - - status = hifWaitForPendingRecv(ar->arHifDevice); - - ar->arWowState = WLAN_WOW_STATE_SUSPENDED; - ar->arWlanPowerState = WLAN_POWER_STATE_WOW; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Not allowed to go to WOW at this moment.\n")); - } -} - -int ar6000_suspend_ev(void *context) -{ - int status = 0; - struct ar6_softc *ar = (struct ar6_softc *)context; - s16 pmmode = ar->arSuspendConfig; -wow_not_connected: - switch (pmmode) { - case WLAN_SUSPEND_WOW: - if (ar->arWmiReady && ar->arWlanState==WLAN_ENABLED && ar->arConnected) { - ar6000_wow_suspend(ar); - AR_DEBUG_PRINTF(ATH_DEBUG_PM,("%s:Suspend for wow mode %d\n", __func__, ar->arWlanPowerState)); - } else { - pmmode = ar->arWow2Config; - goto wow_not_connected; - } - break; - case WLAN_SUSPEND_CUT_PWR: - /* fall through */ - case WLAN_SUSPEND_CUT_PWR_IF_BT_OFF: - /* fall through */ - case WLAN_SUSPEND_DEEP_SLEEP: - /* fall through */ - default: - status = ar6000_update_wlan_pwr_state(ar, WLAN_DISABLED, true); - if (ar->arWlanPowerState==WLAN_POWER_STATE_ON || - ar->arWlanPowerState==WLAN_POWER_STATE_WOW) { - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("Strange suspend state for not wow mode %d", ar->arWlanPowerState)); - } - AR_DEBUG_PRINTF(ATH_DEBUG_PM,("%s:Suspend for %d mode pwr %d status %d\n", __func__, pmmode, ar->arWlanPowerState, status)); - status = (ar->arWlanPowerState == WLAN_POWER_STATE_CUT_PWR) ? 0 : A_EBUSY; - break; - } - - ar->scan_triggered = 0; - return status; -} - -int ar6000_resume_ev(void *context) -{ - struct ar6_softc *ar = (struct ar6_softc *)context; - u16 powerState = ar->arWlanPowerState; - - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("%s: enter previous state %d wowState %d\n", __func__, powerState, ar->arWowState)); - switch (powerState) { - case WLAN_POWER_STATE_WOW: - ar6000_wow_resume(ar); - break; - case WLAN_POWER_STATE_CUT_PWR: - /* fall through */ - case WLAN_POWER_STATE_DEEP_SLEEP: - ar6000_update_wlan_pwr_state(ar, WLAN_ENABLED, true); - AR_DEBUG_PRINTF(ATH_DEBUG_PM,("%s:Resume for %d mode pwr %d\n", __func__, powerState, ar->arWlanPowerState)); - break; - case WLAN_POWER_STATE_ON: - break; - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Strange SDIO bus power mode!!\n")); - break; - } - return 0; -} - -void ar6000_check_wow_status(struct ar6_softc *ar, struct sk_buff *skb, bool isEvent) -{ - if (ar->arWowState!=WLAN_WOW_STATE_NONE) { - if (ar->arWowState==WLAN_WOW_STATE_SUSPENDING) { - AR_DEBUG_PRINTF(ATH_DEBUG_PM,("\n%s: Received IRQ while we are wow suspending!!!\n\n", __func__)); - return; - } - /* Wow resume from irq interrupt */ - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("%s: WoW resume from irq thread status %d\n", __func__, ar->arWlanPowerState)); - ar6000_wow_resume(ar); - } -} - -int ar6000_power_change_ev(void *context, u32 config) -{ - struct ar6_softc *ar = (struct ar6_softc *)context; - int status = 0; - - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("%s: power change event callback %d \n", __func__, config)); - switch (config) { - case HIF_DEVICE_POWER_UP: - ar6000_restart_endpoint(ar->arNetDev); - status = 0; - break; - case HIF_DEVICE_POWER_DOWN: - case HIF_DEVICE_POWER_CUT: - status = 0; - break; - } - return status; -} - -#endif /* CONFIG_PM */ - -int -ar6000_setup_cut_power_state(struct ar6_softc *ar, AR6000_WLAN_STATE state) -{ - int status = 0; - HIF_DEVICE_POWER_CHANGE_TYPE config; - - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("%s: Cut power %d %d \n", __func__,state, ar->arWlanPowerState)); -#ifdef CONFIG_PM - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("Wlan OFF %d BT OFf %d \n", ar->arWlanOff, ar->arBTOff)); -#endif - do { - if (state == WLAN_ENABLED) { - /* Not in cut power state.. exit */ - if (ar->arWlanPowerState != WLAN_POWER_STATE_CUT_PWR) { - break; - } - - /* Change the state to ON */ - ar->arWlanPowerState = WLAN_POWER_STATE_ON; - - - /* Indicate POWER_UP to HIF */ - config = HIF_DEVICE_POWER_UP; - status = HIFConfigureDevice(ar->arHifDevice, - HIF_DEVICE_POWER_STATE_CHANGE, - &config, - sizeof(HIF_DEVICE_POWER_CHANGE_TYPE)); - - if (status == A_PENDING) { - } else if (status == 0) { - ar6000_restart_endpoint(ar->arNetDev); - status = 0; - } - } else if (state == WLAN_DISABLED) { - - - /* Already in cut power state.. exit */ - if (ar->arWlanPowerState == WLAN_POWER_STATE_CUT_PWR) { - break; - } - ar6000_stop_endpoint(ar->arNetDev, true, false); - - config = HIF_DEVICE_POWER_CUT; - status = HIFConfigureDevice(ar->arHifDevice, - HIF_DEVICE_POWER_STATE_CHANGE, - &config, - sizeof(HIF_DEVICE_POWER_CHANGE_TYPE)); - - ar->arWlanPowerState = WLAN_POWER_STATE_CUT_PWR; - } - } while (0); - - return status; -} - -int -ar6000_setup_deep_sleep_state(struct ar6_softc *ar, AR6000_WLAN_STATE state) -{ - int status = 0; - - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("%s: Deep sleep %d %d \n", __func__,state, ar->arWlanPowerState)); -#ifdef CONFIG_PM - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("Wlan OFF %d BT OFf %d \n", ar->arWlanOff, ar->arBTOff)); -#endif - do { - WMI_SET_HOST_SLEEP_MODE_CMD hostSleepMode; - - if (state == WLAN_ENABLED) { - u16 fg_start_period; - - /* Not in deep sleep state.. exit */ - if (ar->arWlanPowerState != WLAN_POWER_STATE_DEEP_SLEEP) { - if (ar->arWlanPowerState != WLAN_POWER_STATE_ON) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Strange state when we resume from deep sleep %d\n", ar->arWlanPowerState)); - } - break; - } - - fg_start_period = (ar->scParams.fg_start_period==0) ? 1 : ar->scParams.fg_start_period; - hostSleepMode.awake = true; - hostSleepMode.asleep = false; - - if ((status=wmi_set_host_sleep_mode_cmd(ar->arWmi, &hostSleepMode)) != 0) { - break; - } - - /* Change the state to ON */ - ar->arWlanPowerState = WLAN_POWER_STATE_ON; - - /* Enable foreground scanning */ - if ((status=wmi_scanparams_cmd(ar->arWmi, fg_start_period, - ar->scParams.fg_end_period, - ar->scParams.bg_period, - ar->scParams.minact_chdwell_time, - ar->scParams.maxact_chdwell_time, - ar->scParams.pas_chdwell_time, - ar->scParams.shortScanRatio, - ar->scParams.scanCtrlFlags, - ar->scParams.max_dfsch_act_time, - ar->scParams.maxact_scan_per_ssid)) != 0) - { - break; - } - - if (ar->arNetworkType != AP_NETWORK) - { - if (ar->arSsidLen) { - if (ar6000_connect_to_ap(ar) != 0) { - /* no need to report error if connection failed */ - break; - } - } - } - } else if (state == WLAN_DISABLED){ - WMI_SET_WOW_MODE_CMD wowMode = { .enable_wow = false }; - - /* Already in deep sleep state.. exit */ - if (ar->arWlanPowerState != WLAN_POWER_STATE_ON) { - if (ar->arWlanPowerState != WLAN_POWER_STATE_DEEP_SLEEP) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Strange state when we suspend for deep sleep %d\n", ar->arWlanPowerState)); - } - break; - } - - if (ar->arNetworkType != AP_NETWORK) - { - /* Disconnect from the AP and disable foreground scanning */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - if (ar->arConnected == true || ar->arConnectPending == true) { - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - wmi_disconnect_cmd(ar->arWmi); - } else { - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - } - } - - ar->scan_triggered = 0; - - if ((status=wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0, 0, 0)) != 0) { - break; - } - - /* make sure we disable wow for deep sleep */ - if ((status=wmi_set_wow_mode_cmd(ar->arWmi, &wowMode))!= 0) - { - break; - } - - ar6000_TxDataCleanup(ar); -#ifndef ATH6K_CONFIG_OTA_MODE - wmi_powermode_cmd(ar->arWmi, REC_POWER); -#endif - - hostSleepMode.awake = false; - hostSleepMode.asleep = true; - if ((status=wmi_set_host_sleep_mode_cmd(ar->arWmi, &hostSleepMode))!= 0) { - break; - } - if (ar->arTxPending[ar->arControlEp]) { - u32 timeleft = wait_event_interruptible_timeout(arEvent, - ar->arTxPending[ar->arControlEp] == 0, wmitimeout * HZ); - if (!timeleft || signal_pending(current)) { - status = A_ERROR; - break; - } - } - status = hifWaitForPendingRecv(ar->arHifDevice); - - ar->arWlanPowerState = WLAN_POWER_STATE_DEEP_SLEEP; - } - } while (0); - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to enter/exit deep sleep %d\n", state)); - } - - return status; -} - -int -ar6000_update_wlan_pwr_state(struct ar6_softc *ar, AR6000_WLAN_STATE state, bool pmEvent) -{ - int status = 0; - u16 powerState, oldPowerState; - AR6000_WLAN_STATE oldstate = ar->arWlanState; - bool wlanOff = ar->arWlanOff; -#ifdef CONFIG_PM - bool btOff = ar->arBTOff; -#endif /* CONFIG_PM */ - - if ((state!=WLAN_DISABLED && state!=WLAN_ENABLED)) { - return A_ERROR; - } - - if (ar->bIsDestroyProgress) { - return A_EBUSY; - } - - if (down_interruptible(&ar->arSem)) { - return A_ERROR; - } - - if (ar->bIsDestroyProgress) { - up(&ar->arSem); - return A_EBUSY; - } - - ar->arWlanState = wlanOff ? WLAN_DISABLED : state; - oldPowerState = ar->arWlanPowerState; - if (state == WLAN_ENABLED) { - powerState = ar->arWlanPowerState; - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("WLAN PWR set to ENABLE^^\n")); - if (!wlanOff) { - if (powerState == WLAN_POWER_STATE_DEEP_SLEEP) { - status = ar6000_setup_deep_sleep_state(ar, WLAN_ENABLED); - } else if (powerState == WLAN_POWER_STATE_CUT_PWR) { - status = ar6000_setup_cut_power_state(ar, WLAN_ENABLED); - } - } -#ifdef CONFIG_PM - else if (pmEvent && wlanOff) { - bool allowCutPwr = ((!ar->arBTSharing) || btOff); - if ((powerState==WLAN_POWER_STATE_CUT_PWR) && (!allowCutPwr)) { - /* Come out of cut power */ - ar6000_setup_cut_power_state(ar, WLAN_ENABLED); - status = ar6000_setup_deep_sleep_state(ar, WLAN_DISABLED); - } - } -#endif /* CONFIG_PM */ - } else if (state == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("WLAN PWR set to DISABLED~\n")); - powerState = WLAN_POWER_STATE_DEEP_SLEEP; -#ifdef CONFIG_PM - if (pmEvent) { /* disable due to suspend */ - bool suspendCutPwr = (ar->arSuspendConfig == WLAN_SUSPEND_CUT_PWR || - (ar->arSuspendConfig == WLAN_SUSPEND_WOW && - ar->arWow2Config==WLAN_SUSPEND_CUT_PWR)); - bool suspendCutIfBtOff = ((ar->arSuspendConfig == - WLAN_SUSPEND_CUT_PWR_IF_BT_OFF || - (ar->arSuspendConfig == WLAN_SUSPEND_WOW && - ar->arWow2Config==WLAN_SUSPEND_CUT_PWR_IF_BT_OFF)) && - (!ar->arBTSharing || btOff)); - if ((suspendCutPwr) || - (suspendCutIfBtOff) || - (ar->arWlanState==WLAN_POWER_STATE_CUT_PWR)) - { - powerState = WLAN_POWER_STATE_CUT_PWR; - } - } else { - if ((wlanOff) && - (ar->arWlanOffConfig == WLAN_OFF_CUT_PWR) && - (!ar->arBTSharing || btOff)) - { - /* For BT clock sharing designs, CUT_POWER depend on BT state */ - powerState = WLAN_POWER_STATE_CUT_PWR; - } - } -#endif /* CONFIG_PM */ - - if (powerState == WLAN_POWER_STATE_DEEP_SLEEP) { - if (ar->arWlanPowerState == WLAN_POWER_STATE_CUT_PWR) { - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("Load firmware before set to deep sleep\n")); - ar6000_setup_cut_power_state(ar, WLAN_ENABLED); - } - status = ar6000_setup_deep_sleep_state(ar, WLAN_DISABLED); - } else if (powerState == WLAN_POWER_STATE_CUT_PWR) { - status = ar6000_setup_cut_power_state(ar, WLAN_DISABLED); - } - - } - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Fail to setup WLAN state %d\n", ar->arWlanState)); - ar->arWlanState = oldstate; - } else if (status == 0) { - WMI_REPORT_SLEEP_STATE_EVENT wmiSleepEvent, *pSleepEvent = NULL; - if ((ar->arWlanPowerState == WLAN_POWER_STATE_ON) && (oldPowerState != WLAN_POWER_STATE_ON)) { - wmiSleepEvent.sleepState = WMI_REPORT_SLEEP_STATUS_IS_AWAKE; - pSleepEvent = &wmiSleepEvent; - } else if ((ar->arWlanPowerState != WLAN_POWER_STATE_ON) && (oldPowerState == WLAN_POWER_STATE_ON)) { - wmiSleepEvent.sleepState = WMI_REPORT_SLEEP_STATUS_IS_DEEP_SLEEP; - pSleepEvent = &wmiSleepEvent; - } - if (pSleepEvent) { - AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("SENT WLAN Sleep Event %d\n", wmiSleepEvent.sleepState)); - } - } - up(&ar->arSem); - return status; -} - -int -ar6000_set_bt_hw_state(struct ar6_softc *ar, u32 enable) -{ -#ifdef CONFIG_PM - bool off = (enable == 0); - int status; - if (ar->arBTOff == off) { - return 0; - } - ar->arBTOff = off; - status = ar6000_update_wlan_pwr_state(ar, ar->arWlanOff ? WLAN_DISABLED : WLAN_ENABLED, false); - return status; -#else - return 0; -#endif -} - -int -ar6000_set_wlan_state(struct ar6_softc *ar, AR6000_WLAN_STATE state) -{ - int status; - bool off = (state == WLAN_DISABLED); - if (ar->arWlanOff == off) { - return 0; - } - ar->arWlanOff = off; - status = ar6000_update_wlan_pwr_state(ar, state, false); - return status; -} diff --git a/drivers/staging/ath6kl/os/linux/ar6000_raw_if.c b/drivers/staging/ath6kl/os/linux/ar6000_raw_if.c deleted file mode 100644 index ae7c1dd96d8..00000000000 --- a/drivers/staging/ath6kl/os/linux/ar6000_raw_if.c +++ /dev/null @@ -1,455 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#include "ar6000_drv.h" - -#ifdef HTC_RAW_INTERFACE - -static void -ar6000_htc_raw_read_cb(void *Context, struct htc_packet *pPacket) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - raw_htc_buffer *busy; - HTC_RAW_STREAM_ID streamID; - AR_RAW_HTC_T *arRaw = ar->arRawHtc; - - busy = (raw_htc_buffer *)pPacket->pPktContext; - A_ASSERT(busy != NULL); - - if (pPacket->Status == A_ECANCELED) { - /* - * HTC provides A_ECANCELED status when it doesn't want to be refilled - * (probably due to a shutdown) - */ - return; - } - - streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint); - A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED); - -#ifdef CF - if (down_trylock(&arRaw->raw_htc_read_sem[streamID])) { -#else - if (down_interruptible(&arRaw->raw_htc_read_sem[streamID])) { -#endif /* CF */ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to down the semaphore\n")); - } - - A_ASSERT((pPacket->Status != 0) || - (pPacket->pBuffer == (busy->data + HTC_HEADER_LEN))); - - busy->length = pPacket->ActualLength + HTC_HEADER_LEN; - busy->currPtr = HTC_HEADER_LEN; - arRaw->read_buffer_available[streamID] = true; - //AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("raw read cb: 0x%X 0x%X \n", busy->currPtr,busy->length); - up(&arRaw->raw_htc_read_sem[streamID]); - - /* Signal the waiting process */ - AR_DEBUG_PRINTF(ATH_DEBUG_HTC_RAW,("Waking up the StreamID(%d) read process\n", streamID)); - wake_up_interruptible(&arRaw->raw_htc_read_queue[streamID]); -} - -static void -ar6000_htc_raw_write_cb(void *Context, struct htc_packet *pPacket) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - raw_htc_buffer *free; - HTC_RAW_STREAM_ID streamID; - AR_RAW_HTC_T *arRaw = ar->arRawHtc; - - free = (raw_htc_buffer *)pPacket->pPktContext; - A_ASSERT(free != NULL); - - if (pPacket->Status == A_ECANCELED) { - /* - * HTC provides A_ECANCELED status when it doesn't want to be refilled - * (probably due to a shutdown) - */ - return; - } - - streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint); - A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED); - -#ifdef CF - if (down_trylock(&arRaw->raw_htc_write_sem[streamID])) { -#else - if (down_interruptible(&arRaw->raw_htc_write_sem[streamID])) { -#endif - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to down the semaphore\n")); - } - - A_ASSERT(pPacket->pBuffer == (free->data + HTC_HEADER_LEN)); - - free->length = 0; - arRaw->write_buffer_available[streamID] = true; - up(&arRaw->raw_htc_write_sem[streamID]); - - /* Signal the waiting process */ - AR_DEBUG_PRINTF(ATH_DEBUG_HTC_RAW,("Waking up the StreamID(%d) write process\n", streamID)); - wake_up_interruptible(&arRaw->raw_htc_write_queue[streamID]); -} - -/* connect to a service */ -static int ar6000_connect_raw_service(struct ar6_softc *ar, - HTC_RAW_STREAM_ID StreamID) -{ - int status; - struct htc_service_connect_resp response; - u8 streamNo; - struct htc_service_connect_req connect; - - do { - - A_MEMZERO(&connect,sizeof(connect)); - /* pass the stream ID as meta data to the RAW streams service */ - streamNo = (u8)StreamID; - connect.pMetaData = &streamNo; - connect.MetaDataLength = sizeof(u8); - /* these fields are the same for all endpoints */ - connect.EpCallbacks.pContext = ar; - connect.EpCallbacks.EpTxComplete = ar6000_htc_raw_write_cb; - connect.EpCallbacks.EpRecv = ar6000_htc_raw_read_cb; - /* simple interface, we don't need these optional callbacks */ - connect.EpCallbacks.EpRecvRefill = NULL; - connect.EpCallbacks.EpSendFull = NULL; - connect.MaxSendQueueDepth = RAW_HTC_WRITE_BUFFERS_NUM; - - /* connect to the raw streams service, we may be able to get 1 or more - * connections, depending on WHAT is running on the target */ - connect.ServiceID = HTC_RAW_STREAMS_SVC; - - A_MEMZERO(&response,sizeof(response)); - - /* try to connect to the raw stream, it is okay if this fails with - * status HTC_SERVICE_NO_MORE_EP */ - status = HTCConnectService(ar->arHtcTarget, - &connect, - &response); - - if (status) { - if (response.ConnectRespCode == HTC_SERVICE_NO_MORE_EP) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("HTC RAW , No more streams allowed \n")); - status = 0; - } - break; - } - - /* set endpoint mapping for the RAW HTC streams */ - arSetRawStream2EndpointIDMap(ar,StreamID,response.Endpoint); - - AR_DEBUG_PRINTF(ATH_DEBUG_HTC_RAW,("HTC RAW : stream ID: %d, endpoint: %d\n", - StreamID, arRawStream2EndpointID(ar,StreamID))); - - } while (false); - - return status; -} - -int ar6000_htc_raw_open(struct ar6_softc *ar) -{ - int status; - int streamID, endPt, count2; - raw_htc_buffer *buffer; - HTC_SERVICE_ID servicepriority; - AR_RAW_HTC_T *arRaw = ar->arRawHtc; - if (!arRaw) { - arRaw = ar->arRawHtc = A_MALLOC(sizeof(AR_RAW_HTC_T)); - if (arRaw) { - A_MEMZERO(arRaw, sizeof(AR_RAW_HTC_T)); - } - } - A_ASSERT(ar->arHtcTarget != NULL); - if (!arRaw) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Faile to allocate memory for HTC RAW interface\n")); - return -ENOMEM; - } - /* wait for target */ - status = HTCWaitTarget(ar->arHtcTarget); - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("HTCWaitTarget failed (%d)\n", status)); - return -ENODEV; - } - - for (endPt = 0; endPt < ENDPOINT_MAX; endPt++) { - arRaw->arEp2RawMapping[endPt] = HTC_RAW_STREAM_NOT_MAPPED; - } - - for (streamID = HTC_RAW_STREAM_0; streamID < HTC_RAW_STREAM_NUM_MAX; streamID++) { - /* Initialize the data structures */ - sema_init(&arRaw->raw_htc_read_sem[streamID], 1); - sema_init(&arRaw->raw_htc_write_sem[streamID], 1); - init_waitqueue_head(&arRaw->raw_htc_read_queue[streamID]); - init_waitqueue_head(&arRaw->raw_htc_write_queue[streamID]); - - /* try to connect to the raw service */ - status = ar6000_connect_raw_service(ar,streamID); - - if (status) { - break; - } - - if (arRawStream2EndpointID(ar,streamID) == 0) { - break; - } - - for (count2 = 0; count2 < RAW_HTC_READ_BUFFERS_NUM; count2 ++) { - /* Initialize the receive buffers */ - buffer = &arRaw->raw_htc_write_buffer[streamID][count2]; - memset(buffer, 0, sizeof(raw_htc_buffer)); - buffer = &arRaw->raw_htc_read_buffer[streamID][count2]; - memset(buffer, 0, sizeof(raw_htc_buffer)); - - SET_HTC_PACKET_INFO_RX_REFILL(&buffer->HTCPacket, - buffer, - buffer->data, - HTC_RAW_BUFFER_SIZE, - arRawStream2EndpointID(ar,streamID)); - - /* Queue buffers to HTC for receive */ - if ((status = HTCAddReceivePkt(ar->arHtcTarget, &buffer->HTCPacket)) != 0) - { - BMIInit(); - return -EIO; - } - } - - for (count2 = 0; count2 < RAW_HTC_WRITE_BUFFERS_NUM; count2 ++) { - /* Initialize the receive buffers */ - buffer = &arRaw->raw_htc_write_buffer[streamID][count2]; - memset(buffer, 0, sizeof(raw_htc_buffer)); - } - - arRaw->read_buffer_available[streamID] = false; - arRaw->write_buffer_available[streamID] = true; - } - - if (status) { - return -EIO; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("HTC RAW, number of streams the target supports: %d \n", streamID)); - - servicepriority = HTC_RAW_STREAMS_SVC; /* only 1 */ - - /* set callbacks and priority list */ - HTCSetCreditDistribution(ar->arHtcTarget, - ar, - NULL, /* use default */ - NULL, /* use default */ - &servicepriority, - 1); - - /* Start the HTC component */ - if ((status = HTCStart(ar->arHtcTarget)) != 0) { - BMIInit(); - return -EIO; - } - - (ar)->arRawIfInit = true; - - return 0; -} - -int ar6000_htc_raw_close(struct ar6_softc *ar) -{ - A_PRINTF("ar6000_htc_raw_close called \n"); - HTCStop(ar->arHtcTarget); - - /* reset the device */ - ar6000_reset_device(ar->arHifDevice, ar->arTargetType, true, false); - /* Initialize the BMI component */ - BMIInit(); - - return 0; -} - -raw_htc_buffer * -get_filled_buffer(struct ar6_softc *ar, HTC_RAW_STREAM_ID StreamID) -{ - int count; - raw_htc_buffer *busy; - AR_RAW_HTC_T *arRaw = ar->arRawHtc; - - /* Check for data */ - for (count = 0; count < RAW_HTC_READ_BUFFERS_NUM; count ++) { - busy = &arRaw->raw_htc_read_buffer[StreamID][count]; - if (busy->length) { - break; - } - } - if (busy->length) { - arRaw->read_buffer_available[StreamID] = true; - } else { - arRaw->read_buffer_available[StreamID] = false; - } - - return busy; -} - -ssize_t ar6000_htc_raw_read(struct ar6_softc *ar, HTC_RAW_STREAM_ID StreamID, - char __user *buffer, size_t length) -{ - int readPtr; - raw_htc_buffer *busy; - AR_RAW_HTC_T *arRaw = ar->arRawHtc; - - if (arRawStream2EndpointID(ar,StreamID) == 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("StreamID(%d) not connected! \n", StreamID)); - return -EFAULT; - } - - if (down_interruptible(&arRaw->raw_htc_read_sem[StreamID])) { - return -ERESTARTSYS; - } - - busy = get_filled_buffer(ar,StreamID); - while (!arRaw->read_buffer_available[StreamID]) { - up(&arRaw->raw_htc_read_sem[StreamID]); - - /* Wait for the data */ - AR_DEBUG_PRINTF(ATH_DEBUG_HTC_RAW,("Sleeping StreamID(%d) read process\n", StreamID)); - if (wait_event_interruptible(arRaw->raw_htc_read_queue[StreamID], - arRaw->read_buffer_available[StreamID])) - { - return -EINTR; - } - if (down_interruptible(&arRaw->raw_htc_read_sem[StreamID])) { - return -ERESTARTSYS; - } - busy = get_filled_buffer(ar,StreamID); - } - - /* Read the data */ - readPtr = busy->currPtr; - if (length > busy->length - HTC_HEADER_LEN) { - length = busy->length - HTC_HEADER_LEN; - } - if (copy_to_user(buffer, &busy->data[readPtr], length)) { - up(&arRaw->raw_htc_read_sem[StreamID]); - return -EFAULT; - } - - busy->currPtr += length; - - if (busy->currPtr == busy->length) - { - busy->currPtr = 0; - busy->length = 0; - HTC_PACKET_RESET_RX(&busy->HTCPacket); - //AR_DEBUG_PRINTF(ATH_DEBUG_HTC_RAW,("raw read ioctl: ep for packet:%d \n", busy->HTCPacket.Endpoint)); - HTCAddReceivePkt(ar->arHtcTarget, &busy->HTCPacket); - } - arRaw->read_buffer_available[StreamID] = false; - up(&arRaw->raw_htc_read_sem[StreamID]); - - return length; -} - -static raw_htc_buffer * -get_free_buffer(struct ar6_softc *ar, HTC_ENDPOINT_ID StreamID) -{ - int count; - raw_htc_buffer *free; - AR_RAW_HTC_T *arRaw = ar->arRawHtc; - - free = NULL; - for (count = 0; count < RAW_HTC_WRITE_BUFFERS_NUM; count ++) { - free = &arRaw->raw_htc_write_buffer[StreamID][count]; - if (free->length == 0) { - break; - } - } - if (!free->length) { - arRaw->write_buffer_available[StreamID] = true; - } else { - arRaw->write_buffer_available[StreamID] = false; - } - - return free; -} - -ssize_t ar6000_htc_raw_write(struct ar6_softc *ar, HTC_RAW_STREAM_ID StreamID, - char __user *buffer, size_t length) -{ - int writePtr; - raw_htc_buffer *free; - AR_RAW_HTC_T *arRaw = ar->arRawHtc; - if (arRawStream2EndpointID(ar,StreamID) == 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("StreamID(%d) not connected! \n", StreamID)); - return -EFAULT; - } - - if (down_interruptible(&arRaw->raw_htc_write_sem[StreamID])) { - return -ERESTARTSYS; - } - - /* Search for a free buffer */ - free = get_free_buffer(ar,StreamID); - - /* Check if there is space to write else wait */ - while (!arRaw->write_buffer_available[StreamID]) { - up(&arRaw->raw_htc_write_sem[StreamID]); - - /* Wait for buffer to become free */ - AR_DEBUG_PRINTF(ATH_DEBUG_HTC_RAW,("Sleeping StreamID(%d) write process\n", StreamID)); - if (wait_event_interruptible(arRaw->raw_htc_write_queue[StreamID], - arRaw->write_buffer_available[StreamID])) - { - return -EINTR; - } - if (down_interruptible(&arRaw->raw_htc_write_sem[StreamID])) { - return -ERESTARTSYS; - } - free = get_free_buffer(ar,StreamID); - } - - /* Send the data */ - writePtr = HTC_HEADER_LEN; - if (length > (HTC_RAW_BUFFER_SIZE - HTC_HEADER_LEN)) { - length = HTC_RAW_BUFFER_SIZE - HTC_HEADER_LEN; - } - - if (copy_from_user(&free->data[writePtr], buffer, length)) { - up(&arRaw->raw_htc_read_sem[StreamID]); - return -EFAULT; - } - - free->length = length; - - SET_HTC_PACKET_INFO_TX(&free->HTCPacket, - free, - &free->data[writePtr], - length, - arRawStream2EndpointID(ar,StreamID), - AR6K_DATA_PKT_TAG); - - HTCSendPkt(ar->arHtcTarget,&free->HTCPacket); - - arRaw->write_buffer_available[StreamID] = false; - up(&arRaw->raw_htc_write_sem[StreamID]); - - return length; -} -#endif /* HTC_RAW_INTERFACE */ diff --git a/drivers/staging/ath6kl/os/linux/cfg80211.c b/drivers/staging/ath6kl/os/linux/cfg80211.c deleted file mode 100644 index 5fdda4aa2fe..00000000000 --- a/drivers/staging/ath6kl/os/linux/cfg80211.c +++ /dev/null @@ -1,1892 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#include <linux/wireless.h> -#include <linux/ieee80211.h> -#include <net/cfg80211.h> -#include <net/netlink.h> - -#include "ar6000_drv.h" - - -extern A_WAITQUEUE_HEAD arEvent; -extern unsigned int wmitimeout; -extern int reconnect_flag; - - -#define RATETAB_ENT(_rate, _rateid, _flags) { \ - .bitrate = (_rate), \ - .flags = (_flags), \ - .hw_value = (_rateid), \ -} - -#define CHAN2G(_channel, _freq, _flags) { \ - .band = IEEE80211_BAND_2GHZ, \ - .hw_value = (_channel), \ - .center_freq = (_freq), \ - .flags = (_flags), \ - .max_antenna_gain = 0, \ - .max_power = 30, \ -} - -#define CHAN5G(_channel, _flags) { \ - .band = IEEE80211_BAND_5GHZ, \ - .hw_value = (_channel), \ - .center_freq = 5000 + (5 * (_channel)), \ - .flags = (_flags), \ - .max_antenna_gain = 0, \ - .max_power = 30, \ -} - -static struct -ieee80211_rate ar6k_rates[] = { - RATETAB_ENT(10, 0x1, 0), - RATETAB_ENT(20, 0x2, 0), - RATETAB_ENT(55, 0x4, 0), - RATETAB_ENT(110, 0x8, 0), - RATETAB_ENT(60, 0x10, 0), - RATETAB_ENT(90, 0x20, 0), - RATETAB_ENT(120, 0x40, 0), - RATETAB_ENT(180, 0x80, 0), - RATETAB_ENT(240, 0x100, 0), - RATETAB_ENT(360, 0x200, 0), - RATETAB_ENT(480, 0x400, 0), - RATETAB_ENT(540, 0x800, 0), -}; - -#define ar6k_a_rates (ar6k_rates + 4) -#define ar6k_a_rates_size 8 -#define ar6k_g_rates (ar6k_rates + 0) -#define ar6k_g_rates_size 12 - -static struct -ieee80211_channel ar6k_2ghz_channels[] = { - CHAN2G(1, 2412, 0), - CHAN2G(2, 2417, 0), - CHAN2G(3, 2422, 0), - CHAN2G(4, 2427, 0), - CHAN2G(5, 2432, 0), - CHAN2G(6, 2437, 0), - CHAN2G(7, 2442, 0), - CHAN2G(8, 2447, 0), - CHAN2G(9, 2452, 0), - CHAN2G(10, 2457, 0), - CHAN2G(11, 2462, 0), - CHAN2G(12, 2467, 0), - CHAN2G(13, 2472, 0), - CHAN2G(14, 2484, 0), -}; - -static struct -ieee80211_channel ar6k_5ghz_a_channels[] = { - CHAN5G(34, 0), CHAN5G(36, 0), - CHAN5G(38, 0), CHAN5G(40, 0), - CHAN5G(42, 0), CHAN5G(44, 0), - CHAN5G(46, 0), CHAN5G(48, 0), - CHAN5G(52, 0), CHAN5G(56, 0), - CHAN5G(60, 0), CHAN5G(64, 0), - CHAN5G(100, 0), CHAN5G(104, 0), - CHAN5G(108, 0), CHAN5G(112, 0), - CHAN5G(116, 0), CHAN5G(120, 0), - CHAN5G(124, 0), CHAN5G(128, 0), - CHAN5G(132, 0), CHAN5G(136, 0), - CHAN5G(140, 0), CHAN5G(149, 0), - CHAN5G(153, 0), CHAN5G(157, 0), - CHAN5G(161, 0), CHAN5G(165, 0), - CHAN5G(184, 0), CHAN5G(188, 0), - CHAN5G(192, 0), CHAN5G(196, 0), - CHAN5G(200, 0), CHAN5G(204, 0), - CHAN5G(208, 0), CHAN5G(212, 0), - CHAN5G(216, 0), -}; - -static struct -ieee80211_supported_band ar6k_band_2ghz = { - .n_channels = ARRAY_SIZE(ar6k_2ghz_channels), - .channels = ar6k_2ghz_channels, - .n_bitrates = ar6k_g_rates_size, - .bitrates = ar6k_g_rates, -}; - -static struct -ieee80211_supported_band ar6k_band_5ghz = { - .n_channels = ARRAY_SIZE(ar6k_5ghz_a_channels), - .channels = ar6k_5ghz_a_channels, - .n_bitrates = ar6k_a_rates_size, - .bitrates = ar6k_a_rates, -}; - -static int -ar6k_set_wpa_version(struct ar6_softc *ar, enum nl80211_wpa_versions wpa_version) -{ - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: %u\n", __func__, wpa_version)); - - if (!wpa_version) { - ar->arAuthMode = NONE_AUTH; - } else if (wpa_version & NL80211_WPA_VERSION_1) { - ar->arAuthMode = WPA_AUTH; - } else if (wpa_version & NL80211_WPA_VERSION_2) { - ar->arAuthMode = WPA2_AUTH; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("%s: %u not spported\n", __func__, wpa_version)); - return -ENOTSUPP; - } - - return 0; -} - -static int -ar6k_set_auth_type(struct ar6_softc *ar, enum nl80211_auth_type auth_type) -{ - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: 0x%x\n", __func__, auth_type)); - - switch (auth_type) { - case NL80211_AUTHTYPE_OPEN_SYSTEM: - ar->arDot11AuthMode = OPEN_AUTH; - break; - case NL80211_AUTHTYPE_SHARED_KEY: - ar->arDot11AuthMode = SHARED_AUTH; - break; - case NL80211_AUTHTYPE_NETWORK_EAP: - ar->arDot11AuthMode = LEAP_AUTH; - break; - - case NL80211_AUTHTYPE_AUTOMATIC: - ar->arDot11AuthMode = OPEN_AUTH; - ar->arAutoAuthStage = AUTH_OPEN_IN_PROGRESS; - break; - - default: - ar->arDot11AuthMode = OPEN_AUTH; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: 0x%x not spported\n", __func__, auth_type)); - return -ENOTSUPP; - } - - return 0; -} - -static int -ar6k_set_cipher(struct ar6_softc *ar, u32 cipher, bool ucast) -{ - u8 *ar_cipher = ucast ? &ar->arPairwiseCrypto : - &ar->arGroupCrypto; - u8 *ar_cipher_len = ucast ? &ar->arPairwiseCryptoLen : - &ar->arGroupCryptoLen; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: cipher 0x%x, ucast %u\n", __func__, cipher, ucast)); - - switch (cipher) { - case 0: - case IW_AUTH_CIPHER_NONE: - *ar_cipher = NONE_CRYPT; - *ar_cipher_len = 0; - break; - case WLAN_CIPHER_SUITE_WEP40: - *ar_cipher = WEP_CRYPT; - *ar_cipher_len = 5; - break; - case WLAN_CIPHER_SUITE_WEP104: - *ar_cipher = WEP_CRYPT; - *ar_cipher_len = 13; - break; - case WLAN_CIPHER_SUITE_TKIP: - *ar_cipher = TKIP_CRYPT; - *ar_cipher_len = 0; - break; - case WLAN_CIPHER_SUITE_CCMP: - *ar_cipher = AES_CRYPT; - *ar_cipher_len = 0; - break; - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("%s: cipher 0x%x not supported\n", __func__, cipher)); - return -ENOTSUPP; - } - - return 0; -} - -static void -ar6k_set_key_mgmt(struct ar6_softc *ar, u32 key_mgmt) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: 0x%x\n", __func__, key_mgmt)); - - if (WLAN_AKM_SUITE_PSK == key_mgmt) { - if (WPA_AUTH == ar->arAuthMode) { - ar->arAuthMode = WPA_PSK_AUTH; - } else if (WPA2_AUTH == ar->arAuthMode) { - ar->arAuthMode = WPA2_PSK_AUTH; - } - } else if (WLAN_AKM_SUITE_8021X != key_mgmt) { - ar->arAuthMode = NONE_AUTH; - } -} - -static int -ar6k_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_connect_params *sme) -{ - struct ar6_softc *ar = ar6k_priv(dev); - int status; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: \n", __func__)); - ar->smeState = SME_CONNECTING; - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready yet\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if(ar->bIsDestroyProgress) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: destroy in progress\n", __func__)); - return -EBUSY; - } - - if(!sme->ssid_len || IEEE80211_MAX_SSID_LEN < sme->ssid_len) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: ssid invalid\n", __func__)); - return -EINVAL; - } - - if(ar->arSkipScan == true && - ((sme->channel && sme->channel->center_freq == 0) || - (sme->bssid && !sme->bssid[0] && !sme->bssid[1] && !sme->bssid[2] && - !sme->bssid[3] && !sme->bssid[4] && !sme->bssid[5]))) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s:SkipScan: channel or bssid invalid\n", __func__)); - return -EINVAL; - } - - if(down_interruptible(&ar->arSem)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: busy, couldn't get access\n", __func__)); - return -ERESTARTSYS; - } - - if(ar->bIsDestroyProgress) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: busy, destroy in progress\n", __func__)); - up(&ar->arSem); - return -EBUSY; - } - - if(ar->arTxPending[wmi_get_control_ep(ar->arWmi)]) { - /* - * sleep until the command queue drains - */ - wait_event_interruptible_timeout(arEvent, - ar->arTxPending[wmi_get_control_ep(ar->arWmi)] == 0, wmitimeout * HZ); - if (signal_pending(current)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: cmd queue drain timeout\n", __func__)); - up(&ar->arSem); - return -EINTR; - } - } - - if(ar->arConnected == true && - ar->arSsidLen == sme->ssid_len && - !memcmp(ar->arSsid, sme->ssid, ar->arSsidLen)) { - reconnect_flag = true; - status = wmi_reconnect_cmd(ar->arWmi, - ar->arReqBssid, - ar->arChannelHint); - - up(&ar->arSem); - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: wmi_reconnect_cmd failed\n", __func__)); - return -EIO; - } - return 0; - } else if(ar->arSsidLen == sme->ssid_len && - !memcmp(ar->arSsid, sme->ssid, ar->arSsidLen)) { - ar6000_disconnect(ar); - } - - A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); - ar->arSsidLen = sme->ssid_len; - memcpy(ar->arSsid, sme->ssid, sme->ssid_len); - - if(sme->channel){ - ar->arChannelHint = sme->channel->center_freq; - } - - A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); - if(sme->bssid){ - if(memcmp(&sme->bssid, bcast_mac, AR6000_ETH_ADDR_LEN)) { - memcpy(ar->arReqBssid, sme->bssid, sizeof(ar->arReqBssid)); - } - } - - ar6k_set_wpa_version(ar, sme->crypto.wpa_versions); - ar6k_set_auth_type(ar, sme->auth_type); - - if(sme->crypto.n_ciphers_pairwise) { - ar6k_set_cipher(ar, sme->crypto.ciphers_pairwise[0], true); - } else { - ar6k_set_cipher(ar, IW_AUTH_CIPHER_NONE, true); - } - ar6k_set_cipher(ar, sme->crypto.cipher_group, false); - - if(sme->crypto.n_akm_suites) { - ar6k_set_key_mgmt(ar, sme->crypto.akm_suites[0]); - } - - if((sme->key_len) && - (NONE_AUTH == ar->arAuthMode) && - (WEP_CRYPT == ar->arPairwiseCrypto)) { - struct ar_key *key = NULL; - - if(sme->key_idx < WMI_MIN_KEY_INDEX || sme->key_idx > WMI_MAX_KEY_INDEX) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("%s: key index %d out of bounds\n", __func__, sme->key_idx)); - up(&ar->arSem); - return -ENOENT; - } - - key = &ar->keys[sme->key_idx]; - key->key_len = sme->key_len; - memcpy(key->key, sme->key, key->key_len); - key->cipher = ar->arPairwiseCrypto; - ar->arDefTxKeyIndex = sme->key_idx; - - wmi_addKey_cmd(ar->arWmi, sme->key_idx, - ar->arPairwiseCrypto, - GROUP_USAGE | TX_USAGE, - key->key_len, - NULL, - key->key, KEY_OP_INIT_VAL, NULL, - NO_SYNC_WMIFLAG); - } - - if (!ar->arUserBssFilter) { - if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Couldn't set bss filtering\n", __func__)); - up(&ar->arSem); - return -EIO; - } - } - - ar->arNetworkType = ar->arNextMode; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: Connect called with authmode %d dot11 auth %d"\ - " PW crypto %d PW crypto Len %d GRP crypto %d"\ - " GRP crypto Len %d channel hint %u\n", - __func__, ar->arAuthMode, ar->arDot11AuthMode, - ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, - ar->arGroupCrypto, ar->arGroupCryptoLen, ar->arChannelHint)); - - reconnect_flag = 0; - status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType, - ar->arDot11AuthMode, ar->arAuthMode, - ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, - ar->arGroupCrypto,ar->arGroupCryptoLen, - ar->arSsidLen, ar->arSsid, - ar->arReqBssid, ar->arChannelHint, - ar->arConnectCtrlFlags); - - up(&ar->arSem); - - if (A_EINVAL == status) { - A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); - ar->arSsidLen = 0; - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Invalid request\n", __func__)); - return -ENOENT; - } else if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: wmi_connect_cmd failed\n", __func__)); - return -EIO; - } - - if ((!(ar->arConnectCtrlFlags & CONNECT_DO_WPA_OFFLOAD)) && - ((WPA_PSK_AUTH == ar->arAuthMode) || (WPA2_PSK_AUTH == ar->arAuthMode))) - { - A_TIMEOUT_MS(&ar->disconnect_timer, A_DISCONNECT_TIMER_INTERVAL, 0); - } - - ar->arConnectCtrlFlags &= ~CONNECT_DO_WPA_OFFLOAD; - ar->arConnectPending = true; - - return 0; -} - -void -ar6k_cfg80211_connect_event(struct ar6_softc *ar, u16 channel, - u8 *bssid, u16 listenInterval, - u16 beaconInterval,NETWORK_TYPE networkType, - u8 beaconIeLen, u8 assocReqLen, - u8 assocRespLen, u8 *assocInfo) -{ - u16 size = 0; - u16 capability = 0; - struct cfg80211_bss *bss = NULL; - struct ieee80211_mgmt *mgmt = NULL; - struct ieee80211_channel *ibss_channel = NULL; - s32 signal = 50 * 100; - u8 ie_buf_len = 0; - unsigned char ie_buf[256]; - unsigned char *ptr_ie_buf = ie_buf; - unsigned char *ieeemgmtbuf = NULL; - u8 source_mac[ATH_MAC_LEN]; - - u8 assocReqIeOffset = sizeof(u16) + /* capinfo*/ - sizeof(u16); /* listen interval */ - u8 assocRespIeOffset = sizeof(u16) + /* capinfo*/ - sizeof(u16) + /* status Code */ - sizeof(u16); /* associd */ - u8 *assocReqIe = assocInfo + beaconIeLen + assocReqIeOffset; - u8 *assocRespIe = assocInfo + beaconIeLen + assocReqLen + assocRespIeOffset; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: \n", __func__)); - - assocReqLen -= assocReqIeOffset; - assocRespLen -= assocRespIeOffset; - - ar->arAutoAuthStage = AUTH_IDLE; - - if((ADHOC_NETWORK & networkType)) { - if(NL80211_IFTYPE_ADHOC != ar->wdev->iftype) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: ath6k not in ibss mode\n", __func__)); - return; - } - } - - if((INFRA_NETWORK & networkType)) { - if(NL80211_IFTYPE_STATION != ar->wdev->iftype) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: ath6k not in station mode\n", __func__)); - return; - } - } - - /* Before informing the join/connect event, make sure that - * bss entry is present in scan list, if it not present - * construct and insert into scan list, otherwise that - * event will be dropped on the way by cfg80211, due to - * this keys will not be plumbed in case of WEP and - * application will not be aware of join/connect status. */ - bss = cfg80211_get_bss(ar->wdev->wiphy, NULL, bssid, - ar->wdev->ssid, ar->wdev->ssid_len, - ((ADHOC_NETWORK & networkType) ? WLAN_CAPABILITY_IBSS : WLAN_CAPABILITY_ESS), - ((ADHOC_NETWORK & networkType) ? WLAN_CAPABILITY_IBSS : WLAN_CAPABILITY_ESS)); - - /* - * Earlier we were updating the cfg about bss by making a beacon frame - * only if the entry for bss is not there. This can have some issue if - * ROAM event is generated and a heavy traffic is ongoing. The ROAM - * event is handled through a work queue and by the time it really gets - * handled, BSS would have been aged out. So it is better to update the - * cfg about BSS irrespective of its entry being present right now or - * not. - */ - - if (ADHOC_NETWORK & networkType) { - /* construct 802.11 mgmt beacon */ - if(ptr_ie_buf) { - *ptr_ie_buf++ = WLAN_EID_SSID; - *ptr_ie_buf++ = ar->arSsidLen; - memcpy(ptr_ie_buf, ar->arSsid, ar->arSsidLen); - ptr_ie_buf +=ar->arSsidLen; - - *ptr_ie_buf++ = WLAN_EID_IBSS_PARAMS; - *ptr_ie_buf++ = 2; /* length */ - *ptr_ie_buf++ = 0; /* ATIM window */ - *ptr_ie_buf++ = 0; /* ATIM window */ - - /* TODO: update ibss params and include supported rates, - * DS param set, extened support rates, wmm. */ - - ie_buf_len = ptr_ie_buf - ie_buf; - } - - capability |= IEEE80211_CAPINFO_IBSS; - if(WEP_CRYPT == ar->arPairwiseCrypto) { - capability |= IEEE80211_CAPINFO_PRIVACY; - } - memcpy(source_mac, ar->arNetDev->dev_addr, ATH_MAC_LEN); - ptr_ie_buf = ie_buf; - } else { - capability = *(u16 *)(&assocInfo[beaconIeLen]); - memcpy(source_mac, bssid, ATH_MAC_LEN); - ptr_ie_buf = assocReqIe; - ie_buf_len = assocReqLen; - } - - size = offsetof(struct ieee80211_mgmt, u) - + sizeof(mgmt->u.beacon) - + ie_buf_len; - - ieeemgmtbuf = A_MALLOC_NOWAIT(size); - if(!ieeemgmtbuf) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("%s: ieeeMgmtbuf alloc error\n", __func__)); - cfg80211_put_bss(bss); - return; - } - - A_MEMZERO(ieeemgmtbuf, size); - mgmt = (struct ieee80211_mgmt *)ieeemgmtbuf; - mgmt->frame_control = (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); - memcpy(mgmt->da, bcast_mac, ATH_MAC_LEN); - memcpy(mgmt->sa, source_mac, ATH_MAC_LEN); - memcpy(mgmt->bssid, bssid, ATH_MAC_LEN); - mgmt->u.beacon.beacon_int = beaconInterval; - mgmt->u.beacon.capab_info = capability; - memcpy(mgmt->u.beacon.variable, ptr_ie_buf, ie_buf_len); - - ibss_channel = ieee80211_get_channel(ar->wdev->wiphy, (int)channel); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: inform bss with bssid %pM channel %d beaconInterval %d " - "capability 0x%x\n", __func__, mgmt->bssid, - ibss_channel->hw_value, beaconInterval, capability)); - - bss = cfg80211_inform_bss_frame(ar->wdev->wiphy, - ibss_channel, mgmt, - le16_to_cpu(size), - signal, GFP_KERNEL); - kfree(ieeemgmtbuf); - cfg80211_put_bss(bss); - - if((ADHOC_NETWORK & networkType)) { - cfg80211_ibss_joined(ar->arNetDev, bssid, GFP_KERNEL); - return; - } - - if (false == ar->arConnected) { - /* inform connect result to cfg80211 */ - ar->smeState = SME_DISCONNECTED; - cfg80211_connect_result(ar->arNetDev, bssid, - assocReqIe, assocReqLen, - assocRespIe, assocRespLen, - WLAN_STATUS_SUCCESS, GFP_KERNEL); - } else { - /* inform roam event to cfg80211 */ - cfg80211_roamed(ar->arNetDev, ibss_channel, bssid, - assocReqIe, assocReqLen, - assocRespIe, assocRespLen, - GFP_KERNEL); - } -} - -static int -ar6k_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev, - u16 reason_code) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: reason=%u\n", __func__, reason_code)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if(ar->bIsDestroyProgress) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: busy, destroy in progress\n", __func__)); - return -EBUSY; - } - - if(down_interruptible(&ar->arSem)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: busy, couldn't get access\n", __func__)); - return -ERESTARTSYS; - } - - reconnect_flag = 0; - ar6000_disconnect(ar); - A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); - ar->arSsidLen = 0; - - if (ar->arSkipScan == false) { - A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); - } - - up(&ar->arSem); - - return 0; -} - -void -ar6k_cfg80211_disconnect_event(struct ar6_softc *ar, u8 reason, - u8 *bssid, u8 assocRespLen, - u8 *assocInfo, u16 protocolReasonStatus) -{ - - u16 status; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: reason=%u\n", __func__, reason)); - - if (ar->scan_request) { - cfg80211_scan_done(ar->scan_request, true); - ar->scan_request = NULL; - } - if((ADHOC_NETWORK & ar->arNetworkType)) { - if(NL80211_IFTYPE_ADHOC != ar->wdev->iftype) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: ath6k not in ibss mode\n", __func__)); - return; - } - A_MEMZERO(bssid, ETH_ALEN); - cfg80211_ibss_joined(ar->arNetDev, bssid, GFP_KERNEL); - return; - } - - if((INFRA_NETWORK & ar->arNetworkType)) { - if(NL80211_IFTYPE_STATION != ar->wdev->iftype) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: ath6k not in station mode\n", __func__)); - return; - } - } - - if(true == ar->arConnectPending) { - if(NO_NETWORK_AVAIL == reason) { - /* connect cmd failed */ - wmi_disconnect_cmd(ar->arWmi); - } else if (reason == DISCONNECT_CMD) { - if (ar->arAutoAuthStage) { - /* - * If the current auth algorithm is open try shared - * and make autoAuthStage idle. We do not make it - * leap for now being. - */ - if (ar->arDot11AuthMode == OPEN_AUTH) { - struct ar_key *key = NULL; - key = &ar->keys[ar->arDefTxKeyIndex]; - if (down_interruptible(&ar->arSem)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: busy, couldn't get access\n", __func__)); - return; - } - - - ar->arDot11AuthMode = SHARED_AUTH; - ar->arAutoAuthStage = AUTH_IDLE; - - wmi_addKey_cmd(ar->arWmi, ar->arDefTxKeyIndex, - ar->arPairwiseCrypto, - GROUP_USAGE | TX_USAGE, - key->key_len, - NULL, - key->key, KEY_OP_INIT_VAL, NULL, - NO_SYNC_WMIFLAG); - - status = wmi_connect_cmd(ar->arWmi, - ar->arNetworkType, - ar->arDot11AuthMode, - ar->arAuthMode, - ar->arPairwiseCrypto, - ar->arPairwiseCryptoLen, - ar->arGroupCrypto, - ar->arGroupCryptoLen, - ar->arSsidLen, - ar->arSsid, - ar->arReqBssid, - ar->arChannelHint, - ar->arConnectCtrlFlags); - up(&ar->arSem); - - } else if (ar->arDot11AuthMode == SHARED_AUTH) { - /* should not reach here */ - } - } else { - ar->arConnectPending = false; - if (ar->smeState == SME_CONNECTING) { - cfg80211_connect_result(ar->arNetDev, bssid, - NULL, 0, - NULL, 0, - WLAN_STATUS_UNSPECIFIED_FAILURE, - GFP_KERNEL); - } else { - cfg80211_disconnected(ar->arNetDev, - reason, - NULL, 0, - GFP_KERNEL); - } - ar->smeState = SME_DISCONNECTED; - } - } - } else { - if (reason != DISCONNECT_CMD) - wmi_disconnect_cmd(ar->arWmi); - } -} - -void -ar6k_cfg80211_scan_node(void *arg, bss_t *ni) -{ - struct wiphy *wiphy = (struct wiphy *)arg; - u16 size; - unsigned char *ieeemgmtbuf = NULL; - struct ieee80211_mgmt *mgmt; - struct ieee80211_channel *channel; - struct ieee80211_supported_band *band; - struct ieee80211_common_ie *cie; - s32 signal; - int freq; - - cie = &ni->ni_cie; - -#define CHAN_IS_11A(x) (!((x >= 2412) && (x <= 2484))) - if(CHAN_IS_11A(cie->ie_chan)) { - /* 11a */ - band = wiphy->bands[IEEE80211_BAND_5GHZ]; - } else if((cie->ie_erp) || (cie->ie_xrates)) { - /* 11g */ - band = wiphy->bands[IEEE80211_BAND_2GHZ]; - } else { - /* 11b */ - band = wiphy->bands[IEEE80211_BAND_2GHZ]; - } - - size = ni->ni_framelen + offsetof(struct ieee80211_mgmt, u); - ieeemgmtbuf = A_MALLOC_NOWAIT(size); - if(!ieeemgmtbuf) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: ieeeMgmtbuf alloc error\n", __func__)); - return; - } - - /* Note: - TODO: Update target to include 802.11 mac header while sending bss info. - Target removes 802.11 mac header while sending the bss info to host, - cfg80211 needs it, for time being just filling the da, sa and bssid fields alone. - */ - mgmt = (struct ieee80211_mgmt *)ieeemgmtbuf; - memcpy(mgmt->da, bcast_mac, ATH_MAC_LEN); - memcpy(mgmt->sa, ni->ni_macaddr, ATH_MAC_LEN); - memcpy(mgmt->bssid, ni->ni_macaddr, ATH_MAC_LEN); - memcpy(ieeemgmtbuf + offsetof(struct ieee80211_mgmt, u), - ni->ni_buf, ni->ni_framelen); - - freq = cie->ie_chan; - channel = ieee80211_get_channel(wiphy, freq); - signal = ni->ni_snr * 100; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: bssid %pM channel %d freq %d size %d\n", __func__, - mgmt->bssid, channel->hw_value, freq, size)); - cfg80211_inform_bss_frame(wiphy, channel, mgmt, - le16_to_cpu(size), - signal, GFP_KERNEL); - - kfree (ieeemgmtbuf); -} - -static int -ar6k_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev, - struct cfg80211_scan_request *request) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(ndev); - int ret = 0; - u32 forceFgScan = 0; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: \n", __func__)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if (!ar->arUserBssFilter) { - if (wmi_bssfilter_cmd(ar->arWmi, - (ar->arConnected ? ALL_BUT_BSS_FILTER : ALL_BSS_FILTER), - 0) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Couldn't set bss filtering\n", __func__)); - return -EIO; - } - } - - if(request->n_ssids && - request->ssids[0].ssid_len) { - u8 i; - - if(request->n_ssids > (MAX_PROBED_SSID_INDEX - 1)) { - request->n_ssids = MAX_PROBED_SSID_INDEX - 1; - } - - for (i = 0; i < request->n_ssids; i++) { - wmi_probedSsid_cmd(ar->arWmi, i+1, SPECIFIC_SSID_FLAG, - request->ssids[i].ssid_len, - request->ssids[i].ssid); - } - } - - if(ar->arConnected) { - forceFgScan = 1; - } - - if(wmi_startscan_cmd(ar->arWmi, WMI_LONG_SCAN, forceFgScan, false, \ - 0, 0, 0, NULL) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: wmi_startscan_cmd failed\n", __func__)); - ret = -EIO; - } - - ar->scan_request = request; - - return ret; -} - -void -ar6k_cfg80211_scanComplete_event(struct ar6_softc *ar, int status) -{ - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: status %d\n", __func__, status)); - - if (!ar->scan_request) - return; - - if ((status == A_ECANCELED) || (status == A_EBUSY)) { - cfg80211_scan_done(ar->scan_request, true); - goto out; - } - - /* Translate data to cfg80211 mgmt format */ - wmi_iterate_nodes(ar->arWmi, ar6k_cfg80211_scan_node, ar->wdev->wiphy); - - cfg80211_scan_done(ar->scan_request, false); - - if(ar->scan_request->n_ssids && - ar->scan_request->ssids[0].ssid_len) { - u8 i; - - for (i = 0; i < ar->scan_request->n_ssids; i++) { - wmi_probedSsid_cmd(ar->arWmi, i+1, DISABLE_SSID_FLAG, - 0, NULL); - } - } - -out: - ar->scan_request = NULL; -} - -static int -ar6k_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev, - u8 key_index, bool pairwise, const u8 *mac_addr, - struct key_params *params) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(ndev); - struct ar_key *key = NULL; - u8 key_usage; - u8 key_type; - int status = 0; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s:\n", __func__)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if(key_index < WMI_MIN_KEY_INDEX || key_index > WMI_MAX_KEY_INDEX) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: key index %d out of bounds\n", __func__, key_index)); - return -ENOENT; - } - - key = &ar->keys[key_index]; - A_MEMZERO(key, sizeof(struct ar_key)); - - if(!mac_addr || is_broadcast_ether_addr(mac_addr)) { - key_usage = GROUP_USAGE; - } else { - key_usage = PAIRWISE_USAGE; - } - - if(params) { - if(params->key_len > WLAN_MAX_KEY_LEN || - params->seq_len > IW_ENCODE_SEQ_MAX_SIZE) - return -EINVAL; - - key->key_len = params->key_len; - memcpy(key->key, params->key, key->key_len); - key->seq_len = params->seq_len; - memcpy(key->seq, params->seq, key->seq_len); - key->cipher = params->cipher; - } - - switch (key->cipher) { - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - key_type = WEP_CRYPT; - break; - - case WLAN_CIPHER_SUITE_TKIP: - key_type = TKIP_CRYPT; - break; - - case WLAN_CIPHER_SUITE_CCMP: - key_type = AES_CRYPT; - break; - - default: - return -ENOTSUPP; - } - - if (((WPA_PSK_AUTH == ar->arAuthMode) || (WPA2_PSK_AUTH == ar->arAuthMode)) && - (GROUP_USAGE & key_usage)) - { - A_UNTIMEOUT(&ar->disconnect_timer); - } - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: index %d, key_len %d, key_type 0x%x,"\ - " key_usage 0x%x, seq_len %d\n", - __func__, key_index, key->key_len, key_type, - key_usage, key->seq_len)); - - ar->arDefTxKeyIndex = key_index; - status = wmi_addKey_cmd(ar->arWmi, ar->arDefTxKeyIndex, key_type, key_usage, - key->key_len, key->seq, key->key, KEY_OP_INIT_VAL, - (u8 *)mac_addr, SYNC_BOTH_WMIFLAG); - - - if (status) { - return -EIO; - } - - return 0; -} - -static int -ar6k_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, - u8 key_index, bool pairwise, const u8 *mac_addr) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(ndev); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: index %d\n", __func__, key_index)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if(key_index < WMI_MIN_KEY_INDEX || key_index > WMI_MAX_KEY_INDEX) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: key index %d out of bounds\n", __func__, key_index)); - return -ENOENT; - } - - if(!ar->keys[key_index].key_len) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: index %d is empty\n", __func__, key_index)); - return 0; - } - - ar->keys[key_index].key_len = 0; - - return wmi_deleteKey_cmd(ar->arWmi, key_index); -} - - -static int -ar6k_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev, - u8 key_index, bool pairwise, const u8 *mac_addr, - void *cookie, - void (*callback)(void *cookie, struct key_params*)) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(ndev); - struct ar_key *key = NULL; - struct key_params params; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: index %d\n", __func__, key_index)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if(key_index < WMI_MIN_KEY_INDEX || key_index > WMI_MAX_KEY_INDEX) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: key index %d out of bounds\n", __func__, key_index)); - return -ENOENT; - } - - key = &ar->keys[key_index]; - A_MEMZERO(¶ms, sizeof(params)); - params.cipher = key->cipher; - params.key_len = key->key_len; - params.seq_len = key->seq_len; - params.seq = key->seq; - params.key = key->key; - - callback(cookie, ¶ms); - - return key->key_len ? 0 : -ENOENT; -} - - -static int -ar6k_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *ndev, - u8 key_index, bool unicast, bool multicast) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(ndev); - struct ar_key *key = NULL; - int status = 0; - u8 key_usage; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: index %d\n", __func__, key_index)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if(key_index < WMI_MIN_KEY_INDEX || key_index > WMI_MAX_KEY_INDEX) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: key index %d out of bounds\n", - __func__, key_index)); - return -ENOENT; - } - - if(!ar->keys[key_index].key_len) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: invalid key index %d\n", - __func__, key_index)); - return -EINVAL; - } - - ar->arDefTxKeyIndex = key_index; - key = &ar->keys[ar->arDefTxKeyIndex]; - key_usage = GROUP_USAGE; - if (WEP_CRYPT == ar->arPairwiseCrypto) { - key_usage |= TX_USAGE; - } - - status = wmi_addKey_cmd(ar->arWmi, ar->arDefTxKeyIndex, - ar->arPairwiseCrypto, key_usage, - key->key_len, key->seq, key->key, KEY_OP_INIT_VAL, - NULL, SYNC_BOTH_WMIFLAG); - if (status) { - return -EIO; - } - - return 0; -} - -static int -ar6k_cfg80211_set_default_mgmt_key(struct wiphy *wiphy, struct net_device *ndev, - u8 key_index) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(ndev); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: index %d\n", __func__, key_index)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: not supported\n", __func__)); - return -ENOTSUPP; -} - -void -ar6k_cfg80211_tkip_micerr_event(struct ar6_softc *ar, u8 keyid, bool ismcast) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, - ("%s: keyid %d, ismcast %d\n", __func__, keyid, ismcast)); - - cfg80211_michael_mic_failure(ar->arNetDev, ar->arBssid, - (ismcast ? NL80211_KEYTYPE_GROUP : NL80211_KEYTYPE_PAIRWISE), - keyid, NULL, GFP_KERNEL); -} - -static int -ar6k_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) -{ - struct ar6_softc *ar = (struct ar6_softc *)wiphy_priv(wiphy); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: changed 0x%x\n", __func__, changed)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if (changed & WIPHY_PARAM_RTS_THRESHOLD) { - if (wmi_set_rts_cmd(ar->arWmi,wiphy->rts_threshold) != 0){ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: wmi_set_rts_cmd failed\n", __func__)); - return -EIO; - } - } - - return 0; -} - -static int -ar6k_cfg80211_set_bitrate_mask(struct wiphy *wiphy, struct net_device *dev, - const u8 *peer, - const struct cfg80211_bitrate_mask *mask) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Setting rates: Not supported\n")); - return -EIO; -} - -/* The type nl80211_tx_power_setting replaces the following data type from 2.6.36 onwards */ -static int -ar6k_cfg80211_set_txpower(struct wiphy *wiphy, enum nl80211_tx_power_setting type, int dbm) -{ - struct ar6_softc *ar = (struct ar6_softc *)wiphy_priv(wiphy); - u8 ar_dbm; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: type 0x%x, dbm %d\n", __func__, type, dbm)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - ar->arTxPwrSet = false; - switch(type) { - case NL80211_TX_POWER_AUTOMATIC: - return 0; - case NL80211_TX_POWER_LIMITED: - ar->arTxPwr = ar_dbm = dbm; - ar->arTxPwrSet = true; - break; - default: - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: type 0x%x not supported\n", __func__, type)); - return -EOPNOTSUPP; - } - - wmi_set_txPwr_cmd(ar->arWmi, ar_dbm); - - return 0; -} - -static int -ar6k_cfg80211_get_txpower(struct wiphy *wiphy, int *dbm) -{ - struct ar6_softc *ar = (struct ar6_softc *)wiphy_priv(wiphy); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: \n", __func__)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if((ar->arConnected == true)) { - ar->arTxPwr = 0; - - if(wmi_get_txPwr_cmd(ar->arWmi) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: wmi_get_txPwr_cmd failed\n", __func__)); - return -EIO; - } - - wait_event_interruptible_timeout(arEvent, ar->arTxPwr != 0, 5 * HZ); - - if(signal_pending(current)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Target did not respond\n", __func__)); - return -EINTR; - } - } - - *dbm = ar->arTxPwr; - return 0; -} - -static int -ar6k_cfg80211_set_power_mgmt(struct wiphy *wiphy, - struct net_device *dev, - bool pmgmt, int timeout) -{ - struct ar6_softc *ar = ar6k_priv(dev); - WMI_POWER_MODE_CMD pwrMode; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: pmgmt %d, timeout %d\n", __func__, pmgmt, timeout)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if(pmgmt) { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: Max Perf\n", __func__)); - pwrMode.powerMode = REC_POWER; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: Rec Power\n", __func__)); - pwrMode.powerMode = MAX_PERF_POWER; - } - - if(wmi_powermode_cmd(ar->arWmi, pwrMode.powerMode) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: wmi_powermode_cmd failed\n", __func__)); - return -EIO; - } - - return 0; -} - -static struct net_device * -ar6k_cfg80211_add_virtual_intf(struct wiphy *wiphy, char *name, - enum nl80211_iftype type, u32 *flags, - struct vif_params *params) -{ - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: not supported\n", __func__)); - - /* Multiple virtual interface is not supported. - * The default interface supports STA and IBSS type - */ - return ERR_PTR(-EOPNOTSUPP); -} - -static int -ar6k_cfg80211_del_virtual_intf(struct wiphy *wiphy, struct net_device *dev) -{ - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: not supported\n", __func__)); - - /* Multiple virtual interface is not supported. - * The default interface supports STA and IBSS type - */ - return -EOPNOTSUPP; -} - -static int -ar6k_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, - enum nl80211_iftype type, u32 *flags, - struct vif_params *params) -{ - struct ar6_softc *ar = ar6k_priv(ndev); - struct wireless_dev *wdev = ar->wdev; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: type %u\n", __func__, type)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - switch (type) { - case NL80211_IFTYPE_STATION: - ar->arNextMode = INFRA_NETWORK; - break; - case NL80211_IFTYPE_ADHOC: - ar->arNextMode = ADHOC_NETWORK; - break; - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: type %u\n", __func__, type)); - return -EOPNOTSUPP; - } - - wdev->iftype = type; - - return 0; -} - -static int -ar6k_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_ibss_params *ibss_param) -{ - struct ar6_softc *ar = ar6k_priv(dev); - int status; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: \n", __func__)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - if(!ibss_param->ssid_len || IEEE80211_MAX_SSID_LEN < ibss_param->ssid_len) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: ssid invalid\n", __func__)); - return -EINVAL; - } - - ar->arSsidLen = ibss_param->ssid_len; - memcpy(ar->arSsid, ibss_param->ssid, ar->arSsidLen); - - if(ibss_param->channel) { - ar->arChannelHint = ibss_param->channel->center_freq; - } - - if(ibss_param->channel_fixed) { - /* TODO: channel_fixed: The channel should be fixed, do not search for - * IBSSs to join on other channels. Target firmware does not support this - * feature, needs to be updated.*/ - } - - A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); - if(ibss_param->bssid) { - if(memcmp(&ibss_param->bssid, bcast_mac, AR6000_ETH_ADDR_LEN)) { - memcpy(ar->arReqBssid, ibss_param->bssid, sizeof(ar->arReqBssid)); - } - } - - ar6k_set_wpa_version(ar, 0); - ar6k_set_auth_type(ar, NL80211_AUTHTYPE_OPEN_SYSTEM); - - if(ibss_param->privacy) { - ar6k_set_cipher(ar, WLAN_CIPHER_SUITE_WEP40, true); - ar6k_set_cipher(ar, WLAN_CIPHER_SUITE_WEP40, false); - } else { - ar6k_set_cipher(ar, IW_AUTH_CIPHER_NONE, true); - ar6k_set_cipher(ar, IW_AUTH_CIPHER_NONE, false); - } - - ar->arNetworkType = ar->arNextMode; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: Connect called with authmode %d dot11 auth %d"\ - " PW crypto %d PW crypto Len %d GRP crypto %d"\ - " GRP crypto Len %d channel hint %u\n", - __func__, ar->arAuthMode, ar->arDot11AuthMode, - ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, - ar->arGroupCrypto, ar->arGroupCryptoLen, ar->arChannelHint)); - - status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType, - ar->arDot11AuthMode, ar->arAuthMode, - ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, - ar->arGroupCrypto,ar->arGroupCryptoLen, - ar->arSsidLen, ar->arSsid, - ar->arReqBssid, ar->arChannelHint, - ar->arConnectCtrlFlags); - ar->arConnectPending = true; - - return 0; -} - -static int -ar6k_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: \n", __func__)); - - if(ar->arWmiReady == false) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wmi not ready\n", __func__)); - return -EIO; - } - - if(ar->arWlanState == WLAN_DISABLED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Wlan disabled\n", __func__)); - return -EIO; - } - - ar6000_disconnect(ar); - A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); - ar->arSsidLen = 0; - - return 0; -} - -#ifdef CONFIG_NL80211_TESTMODE -enum ar6k_testmode_attr { - __AR6K_TM_ATTR_INVALID = 0, - AR6K_TM_ATTR_CMD = 1, - AR6K_TM_ATTR_DATA = 2, - - /* keep last */ - __AR6K_TM_ATTR_AFTER_LAST, - AR6K_TM_ATTR_MAX = __AR6K_TM_ATTR_AFTER_LAST - 1 -}; - -enum ar6k_testmode_cmd { - AR6K_TM_CMD_TCMD = 0, - AR6K_TM_CMD_RX_REPORT = 1, -}; - -#define AR6K_TM_DATA_MAX_LEN 5000 - -static const struct nla_policy ar6k_testmode_policy[AR6K_TM_ATTR_MAX + 1] = { - [AR6K_TM_ATTR_CMD] = { .type = NLA_U32 }, - [AR6K_TM_ATTR_DATA] = { .type = NLA_BINARY, - .len = AR6K_TM_DATA_MAX_LEN }, -}; - -void ar6000_testmode_rx_report_event(struct ar6_softc *ar, void *buf, - int buf_len) -{ - if (down_interruptible(&ar->arSem)) - return; - - kfree(ar->tcmd_rx_report); - - ar->tcmd_rx_report = kmemdup(buf, buf_len, GFP_KERNEL); - ar->tcmd_rx_report_len = buf_len; - - up(&ar->arSem); - - wake_up(&arEvent); -} - -static int ar6000_testmode_rx_report(struct ar6_softc *ar, void *buf, - int buf_len, struct sk_buff *skb) -{ - int ret = 0; - long left; - - if (down_interruptible(&ar->arSem)) - return -ERESTARTSYS; - - if (ar->arWmiReady == false) { - ret = -EIO; - goto out; - } - - if (ar->bIsDestroyProgress) { - ret = -EBUSY; - goto out; - } - - WARN_ON(ar->tcmd_rx_report != NULL); - WARN_ON(ar->tcmd_rx_report_len > 0); - - if (wmi_test_cmd(ar->arWmi, buf, buf_len) < 0) { - up(&ar->arSem); - return -EIO; - } - - left = wait_event_interruptible_timeout(arEvent, - ar->tcmd_rx_report != NULL, - wmitimeout * HZ); - - if (left == 0) { - ret = -ETIMEDOUT; - goto out; - } else if (left < 0) { - ret = left; - goto out; - } - - if (ar->tcmd_rx_report == NULL || ar->tcmd_rx_report_len == 0) { - ret = -EINVAL; - goto out; - } - - NLA_PUT(skb, AR6K_TM_ATTR_DATA, ar->tcmd_rx_report_len, - ar->tcmd_rx_report); - - kfree(ar->tcmd_rx_report); - ar->tcmd_rx_report = NULL; - -out: - up(&ar->arSem); - - return ret; - -nla_put_failure: - ret = -ENOBUFS; - goto out; -} - -static int ar6k_testmode_cmd(struct wiphy *wiphy, void *data, int len) -{ - struct ar6_softc *ar = wiphy_priv(wiphy); - struct nlattr *tb[AR6K_TM_ATTR_MAX + 1]; - int err, buf_len, reply_len; - struct sk_buff *skb; - void *buf; - - err = nla_parse(tb, AR6K_TM_ATTR_MAX, data, len, - ar6k_testmode_policy); - if (err) - return err; - - if (!tb[AR6K_TM_ATTR_CMD]) - return -EINVAL; - - switch (nla_get_u32(tb[AR6K_TM_ATTR_CMD])) { - case AR6K_TM_CMD_TCMD: - if (!tb[AR6K_TM_ATTR_DATA]) - return -EINVAL; - - buf = nla_data(tb[AR6K_TM_ATTR_DATA]); - buf_len = nla_len(tb[AR6K_TM_ATTR_DATA]); - - wmi_test_cmd(ar->arWmi, buf, buf_len); - - return 0; - - break; - case AR6K_TM_CMD_RX_REPORT: - if (!tb[AR6K_TM_ATTR_DATA]) - return -EINVAL; - - buf = nla_data(tb[AR6K_TM_ATTR_DATA]); - buf_len = nla_len(tb[AR6K_TM_ATTR_DATA]); - - reply_len = nla_total_size(AR6K_TM_DATA_MAX_LEN); - skb = cfg80211_testmode_alloc_reply_skb(wiphy, reply_len); - if (!skb) - return -ENOMEM; - - err = ar6000_testmode_rx_report(ar, buf, buf_len, skb); - if (err < 0) { - kfree_skb(skb); - return err; - } - - return cfg80211_testmode_reply(skb); - default: - return -EOPNOTSUPP; - } -} -#endif - -static const -u32 cipher_suites[] = { - WLAN_CIPHER_SUITE_WEP40, - WLAN_CIPHER_SUITE_WEP104, - WLAN_CIPHER_SUITE_TKIP, - WLAN_CIPHER_SUITE_CCMP, -}; - -bool is_rate_legacy(s32 rate) -{ - static const s32 legacy[] = { 1000, 2000, 5500, 11000, - 6000, 9000, 12000, 18000, 24000, - 36000, 48000, 54000 }; - u8 i; - - for (i = 0; i < ARRAY_SIZE(legacy); i++) { - if (rate == legacy[i]) - return true; - } - - return false; -} - -bool is_rate_ht20(s32 rate, u8 *mcs, bool *sgi) -{ - static const s32 ht20[] = { 6500, 13000, 19500, 26000, 39000, - 52000, 58500, 65000, 72200 }; - u8 i; - - for (i = 0; i < ARRAY_SIZE(ht20); i++) { - if (rate == ht20[i]) { - if (i == ARRAY_SIZE(ht20) - 1) - /* last rate uses sgi */ - *sgi = true; - else - *sgi = false; - - *mcs = i; - return true; - } - } - return false; -} - -bool is_rate_ht40(s32 rate, u8 *mcs, bool *sgi) -{ - static const s32 ht40[] = { 13500, 27000, 40500, 54000, - 81000, 108000, 121500, 135000, - 150000 }; - u8 i; - - for (i = 0; i < ARRAY_SIZE(ht40); i++) { - if (rate == ht40[i]) { - if (i == ARRAY_SIZE(ht40) - 1) - /* last rate uses sgi */ - *sgi = true; - else - *sgi = false; - - *mcs = i; - return true; - } - } - - return false; -} - -static int ar6k_get_station(struct wiphy *wiphy, struct net_device *dev, - u8 *mac, struct station_info *sinfo) -{ - struct ar6_softc *ar = ar6k_priv(dev); - long left; - bool sgi; - s32 rate; - int ret; - u8 mcs; - - if (memcmp(mac, ar->arBssid, ETH_ALEN) != 0) - return -ENOENT; - - if (down_interruptible(&ar->arSem)) - return -EBUSY; - - ar->statsUpdatePending = true; - - ret = wmi_get_stats_cmd(ar->arWmi); - - if (ret != 0) { - up(&ar->arSem); - return -EIO; - } - - left = wait_event_interruptible_timeout(arEvent, - ar->statsUpdatePending == false, - wmitimeout * HZ); - - up(&ar->arSem); - - if (left == 0) - return -ETIMEDOUT; - else if (left < 0) - return left; - - if (ar->arTargetStats.rx_bytes) { - sinfo->rx_bytes = ar->arTargetStats.rx_bytes; - sinfo->filled |= STATION_INFO_RX_BYTES; - sinfo->rx_packets = ar->arTargetStats.rx_packets; - sinfo->filled |= STATION_INFO_RX_PACKETS; - } - - if (ar->arTargetStats.tx_bytes) { - sinfo->tx_bytes = ar->arTargetStats.tx_bytes; - sinfo->filled |= STATION_INFO_TX_BYTES; - sinfo->tx_packets = ar->arTargetStats.tx_packets; - sinfo->filled |= STATION_INFO_TX_PACKETS; - } - - sinfo->signal = ar->arTargetStats.cs_rssi; - sinfo->filled |= STATION_INFO_SIGNAL; - - rate = ar->arTargetStats.tx_unicast_rate; - - if (is_rate_legacy(rate)) { - sinfo->txrate.legacy = rate / 100; - } else if (is_rate_ht20(rate, &mcs, &sgi)) { - if (sgi) { - sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; - sinfo->txrate.mcs = mcs - 1; - } else { - sinfo->txrate.mcs = mcs; - } - - sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS; - } else if (is_rate_ht40(rate, &mcs, &sgi)) { - if (sgi) { - sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; - sinfo->txrate.mcs = mcs - 1; - } else { - sinfo->txrate.mcs = mcs; - } - - sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; - sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS; - } else { - WARN(1, "invalid rate: %d", rate); - return 0; - } - - sinfo->filled |= STATION_INFO_TX_BITRATE; - - return 0; -} - -static int ar6k_set_pmksa(struct wiphy *wiphy, struct net_device *netdev, - struct cfg80211_pmksa *pmksa) -{ - struct ar6_softc *ar = ar6k_priv(netdev); - return wmi_setPmkid_cmd(ar->arWmi, pmksa->bssid, pmksa->pmkid, true); -} - -static int ar6k_del_pmksa(struct wiphy *wiphy, struct net_device *netdev, - struct cfg80211_pmksa *pmksa) -{ - struct ar6_softc *ar = ar6k_priv(netdev); - return wmi_setPmkid_cmd(ar->arWmi, pmksa->bssid, pmksa->pmkid, false); -} - -static int ar6k_flush_pmksa(struct wiphy *wiphy, struct net_device *netdev) -{ - struct ar6_softc *ar = ar6k_priv(netdev); - if (ar->arConnected) - return wmi_setPmkid_cmd(ar->arWmi, ar->arBssid, NULL, false); - return 0; -} - -static struct -cfg80211_ops ar6k_cfg80211_ops = { - .change_virtual_intf = ar6k_cfg80211_change_iface, - .add_virtual_intf = ar6k_cfg80211_add_virtual_intf, - .del_virtual_intf = ar6k_cfg80211_del_virtual_intf, - .scan = ar6k_cfg80211_scan, - .connect = ar6k_cfg80211_connect, - .disconnect = ar6k_cfg80211_disconnect, - .add_key = ar6k_cfg80211_add_key, - .get_key = ar6k_cfg80211_get_key, - .del_key = ar6k_cfg80211_del_key, - .set_default_key = ar6k_cfg80211_set_default_key, - .set_default_mgmt_key = ar6k_cfg80211_set_default_mgmt_key, - .set_wiphy_params = ar6k_cfg80211_set_wiphy_params, - .set_bitrate_mask = ar6k_cfg80211_set_bitrate_mask, - .set_tx_power = ar6k_cfg80211_set_txpower, - .get_tx_power = ar6k_cfg80211_get_txpower, - .set_power_mgmt = ar6k_cfg80211_set_power_mgmt, - .join_ibss = ar6k_cfg80211_join_ibss, - .leave_ibss = ar6k_cfg80211_leave_ibss, - .get_station = ar6k_get_station, - .set_pmksa = ar6k_set_pmksa, - .del_pmksa = ar6k_del_pmksa, - .flush_pmksa = ar6k_flush_pmksa, - CFG80211_TESTMODE_CMD(ar6k_testmode_cmd) -}; - -struct wireless_dev * -ar6k_cfg80211_init(struct device *dev) -{ - int ret = 0; - struct wireless_dev *wdev; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: \n", __func__)); - - wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); - if(!wdev) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("%s: Couldn't allocate wireless device\n", __func__)); - return ERR_PTR(-ENOMEM); - } - - /* create a new wiphy for use with cfg80211 */ - wdev->wiphy = wiphy_new(&ar6k_cfg80211_ops, sizeof(struct ar6_softc)); - if(!wdev->wiphy) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("%s: Couldn't allocate wiphy device\n", __func__)); - kfree(wdev); - return ERR_PTR(-ENOMEM); - } - - /* set device pointer for wiphy */ - set_wiphy_dev(wdev->wiphy, dev); - - wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC); - /* max num of ssids that can be probed during scanning */ - wdev->wiphy->max_scan_ssids = MAX_PROBED_SSID_INDEX; - wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &ar6k_band_2ghz; - wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &ar6k_band_5ghz; - wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; - - wdev->wiphy->cipher_suites = cipher_suites; - wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); - - ret = wiphy_register(wdev->wiphy); - if(ret < 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("%s: Couldn't register wiphy device\n", __func__)); - wiphy_free(wdev->wiphy); - return ERR_PTR(ret); - } - - return wdev; -} - -void -ar6k_cfg80211_deinit(struct ar6_softc *ar) -{ - struct wireless_dev *wdev = ar->wdev; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("%s: \n", __func__)); - - if(ar->scan_request) { - cfg80211_scan_done(ar->scan_request, true); - ar->scan_request = NULL; - } - - if(!wdev) - return; - - wiphy_unregister(wdev->wiphy); - wiphy_free(wdev->wiphy); - kfree(wdev); -} - - - - - - - diff --git a/drivers/staging/ath6kl/os/linux/export_hci_transport.c b/drivers/staging/ath6kl/os/linux/export_hci_transport.c deleted file mode 100644 index 430998edacc..00000000000 --- a/drivers/staging/ath6kl/os/linux/export_hci_transport.c +++ /dev/null @@ -1,124 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2009-2010 Atheros Corporation. All rights reserved. -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -//------------------------------------------------------------------------------ -//============================================================================== -// HCI bridge implementation -// -// Author(s): ="Atheros" -//============================================================================== -#include <a_config.h> -#include <athdefs.h> -#include "a_osapi.h" -#include "htc_api.h" -#include "a_drv.h" -#include "hif.h" -#include "common_drv.h" -#include "a_debug.h" -#include "hci_transport_api.h" - -#include "AR6002/hw4.0/hw/apb_athr_wlan_map.h" -#include "AR6002/hw4.0/hw/uart_reg.h" -#include "AR6002/hw4.0/hw/rtc_wlan_reg.h" - -HCI_TRANSPORT_HANDLE (*_HCI_TransportAttach)(void *HTCHandle, struct hci_transport_config_info *pInfo); -void (*_HCI_TransportDetach)(HCI_TRANSPORT_HANDLE HciTrans); -int (*_HCI_TransportAddReceivePkts)(HCI_TRANSPORT_HANDLE HciTrans, struct htc_packet_queue *pQueue); -int (*_HCI_TransportSendPkt)(HCI_TRANSPORT_HANDLE HciTrans, struct htc_packet *pPacket, bool Synchronous); -void (*_HCI_TransportStop)(HCI_TRANSPORT_HANDLE HciTrans); -int (*_HCI_TransportStart)(HCI_TRANSPORT_HANDLE HciTrans); -int (*_HCI_TransportEnableDisableAsyncRecv)(HCI_TRANSPORT_HANDLE HciTrans, bool Enable); -int (*_HCI_TransportRecvHCIEventSync)(HCI_TRANSPORT_HANDLE HciTrans, - struct htc_packet *pPacket, - int MaxPollMS); -int (*_HCI_TransportSetBaudRate)(HCI_TRANSPORT_HANDLE HciTrans, u32 Baud); -int (*_HCI_TransportEnablePowerMgmt)(HCI_TRANSPORT_HANDLE HciTrans, bool Enable); - -extern struct hci_transport_callbacks ar6kHciTransCallbacks; - -int ar6000_register_hci_transport(struct hci_transport_callbacks *hciTransCallbacks) -{ - ar6kHciTransCallbacks = *hciTransCallbacks; - - _HCI_TransportAttach = HCI_TransportAttach; - _HCI_TransportDetach = HCI_TransportDetach; - _HCI_TransportAddReceivePkts = HCI_TransportAddReceivePkts; - _HCI_TransportSendPkt = HCI_TransportSendPkt; - _HCI_TransportStop = HCI_TransportStop; - _HCI_TransportStart = HCI_TransportStart; - _HCI_TransportEnableDisableAsyncRecv = HCI_TransportEnableDisableAsyncRecv; - _HCI_TransportRecvHCIEventSync = HCI_TransportRecvHCIEventSync; - _HCI_TransportSetBaudRate = HCI_TransportSetBaudRate; - _HCI_TransportEnablePowerMgmt = HCI_TransportEnablePowerMgmt; - - return 0; -} - -int -ar6000_get_hif_dev(struct hif_device *device, void *config) -{ - int status; - - status = HIFConfigureDevice(device, - HIF_DEVICE_GET_OS_DEVICE, - (struct hif_device_os_device_info *)config, - sizeof(struct hif_device_os_device_info)); - return status; -} - -int ar6000_set_uart_config(struct hif_device *hifDevice, - u32 scale, - u32 step) -{ - u32 regAddress; - u32 regVal; - int status; - - regAddress = WLAN_UART_BASE_ADDRESS | UART_CLKDIV_ADDRESS; - regVal = ((u32)scale << 16) | step; - /* change the HCI UART scale/step values through the diagnostic window */ - status = ar6000_WriteRegDiag(hifDevice, ®Address, ®Val); - - return status; -} - -int ar6000_get_core_clock_config(struct hif_device *hifDevice, u32 *data) -{ - u32 regAddress; - int status; - - regAddress = WLAN_RTC_BASE_ADDRESS | WLAN_CPU_CLOCK_ADDRESS; - /* read CPU clock settings*/ - status = ar6000_ReadRegDiag(hifDevice, ®Address, data); - - return status; -} - -EXPORT_SYMBOL(ar6000_register_hci_transport); -EXPORT_SYMBOL(ar6000_get_hif_dev); -EXPORT_SYMBOL(ar6000_set_uart_config); -EXPORT_SYMBOL(ar6000_get_core_clock_config); -EXPORT_SYMBOL(_HCI_TransportAttach); -EXPORT_SYMBOL(_HCI_TransportDetach); -EXPORT_SYMBOL(_HCI_TransportAddReceivePkts); -EXPORT_SYMBOL(_HCI_TransportSendPkt); -EXPORT_SYMBOL(_HCI_TransportStop); -EXPORT_SYMBOL(_HCI_TransportStart); -EXPORT_SYMBOL(_HCI_TransportEnableDisableAsyncRecv); -EXPORT_SYMBOL(_HCI_TransportRecvHCIEventSync); -EXPORT_SYMBOL(_HCI_TransportSetBaudRate); -EXPORT_SYMBOL(_HCI_TransportEnablePowerMgmt); diff --git a/drivers/staging/ath6kl/os/linux/hci_bridge.c b/drivers/staging/ath6kl/os/linux/hci_bridge.c deleted file mode 100644 index 6087edcb1d6..00000000000 --- a/drivers/staging/ath6kl/os/linux/hci_bridge.c +++ /dev/null @@ -1,1141 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2009-2010 Atheros Corporation. All rights reserved. -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -//------------------------------------------------------------------------------ -//============================================================================== -// HCI bridge implementation -// -// Author(s): ="Atheros" -//============================================================================== - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -#include <linux/etherdevice.h> -#include <a_config.h> -#include <athdefs.h> -#include "a_osapi.h" -#include "htc_api.h" -#include "wmi.h" -#include "a_drv.h" -#include "hif.h" -#include "common_drv.h" -#include "a_debug.h" -#define ATH_DEBUG_HCI_BRIDGE ATH_DEBUG_MAKE_MODULE_MASK(6) -#define ATH_DEBUG_HCI_RECV ATH_DEBUG_MAKE_MODULE_MASK(7) -#define ATH_DEBUG_HCI_SEND ATH_DEBUG_MAKE_MODULE_MASK(8) -#define ATH_DEBUG_HCI_DUMP ATH_DEBUG_MAKE_MODULE_MASK(9) -#else -#include "ar6000_drv.h" -#endif /* EXPORT_HCI_BRIDGE_INTERFACE */ - -#ifdef ATH_AR6K_ENABLE_GMBOX -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -#include "export_hci_transport.h" -#else -#include "hci_transport_api.h" -#endif -#include "epping_test.h" -#include "gmboxif.h" -#include "ar3kconfig.h" -#include <net/bluetooth/bluetooth.h> -#include <net/bluetooth/hci_core.h> - - /* only build on newer kernels which have BT configured */ -#if defined(CONFIG_BT_MODULE) || defined(CONFIG_BT) -#define CONFIG_BLUEZ_HCI_BRIDGE -#endif - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -unsigned int ar3khcibaud = 0; -unsigned int hciuartscale = 0; -unsigned int hciuartstep = 0; - -module_param(ar3khcibaud, int, 0644); -module_param(hciuartscale, int, 0644); -module_param(hciuartstep, int, 0644); -#else -extern unsigned int ar3khcibaud; -extern unsigned int hciuartscale; -extern unsigned int hciuartstep; -#endif /* EXPORT_HCI_BRIDGE_INTERFACE */ - -struct ar6k_hci_bridge_info { - void *pHCIDev; /* HCI bridge device */ - struct hci_transport_properties HCIProps; /* HCI bridge props */ - struct hci_dev *pBtStackHCIDev; /* BT Stack HCI dev */ - bool HciNormalMode; /* Actual HCI mode enabled (non-TEST)*/ - bool HciRegistered; /* HCI device registered with stack */ - struct htc_packet_queue HTCPacketStructHead; - u8 *pHTCStructAlloc; - spinlock_t BridgeLock; -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - struct hci_transport_misc_handles HCITransHdl; -#else - struct ar6_softc *ar; -#endif /* EXPORT_HCI_BRIDGE_INTERFACE */ -}; - -#define MAX_ACL_RECV_BUFS 16 -#define MAX_EVT_RECV_BUFS 8 -#define MAX_HCI_WRITE_QUEUE_DEPTH 32 -#define MAX_ACL_RECV_LENGTH 1200 -#define MAX_EVT_RECV_LENGTH 257 -#define TX_PACKET_RSV_OFFSET 32 -#define NUM_HTC_PACKET_STRUCTS ((MAX_ACL_RECV_BUFS + MAX_EVT_RECV_BUFS + MAX_HCI_WRITE_QUEUE_DEPTH) * 2) - -#define HCI_GET_OP_CODE(p) (((u16)((p)[1])) << 8) | ((u16)((p)[0])) - -extern unsigned int setupbtdev; -struct ar3k_config_info ar3kconfig; - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -struct ar6k_hci_bridge_info *g_pHcidevInfo; -#endif - -static int bt_setup_hci(struct ar6k_hci_bridge_info *pHcidevInfo); -static void bt_cleanup_hci(struct ar6k_hci_bridge_info *pHcidevInfo); -static int bt_register_hci(struct ar6k_hci_bridge_info *pHcidevInfo); -static bool bt_indicate_recv(struct ar6k_hci_bridge_info *pHcidevInfo, - HCI_TRANSPORT_PACKET_TYPE Type, - struct sk_buff *skb); -static struct sk_buff *bt_alloc_buffer(struct ar6k_hci_bridge_info *pHcidevInfo, int Length); -static void bt_free_buffer(struct ar6k_hci_bridge_info *pHcidevInfo, struct sk_buff *skb); - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -int ar6000_setup_hci(void *ar); -void ar6000_cleanup_hci(void *ar); -int hci_test_send(void *ar, struct sk_buff *skb); -#else -int ar6000_setup_hci(struct ar6_softc *ar); -void ar6000_cleanup_hci(struct ar6_softc *ar); -/* HCI bridge testing */ -int hci_test_send(struct ar6_softc *ar, struct sk_buff *skb); -#endif /* EXPORT_HCI_BRIDGE_INTERFACE */ - -#define LOCK_BRIDGE(dev) spin_lock_bh(&(dev)->BridgeLock) -#define UNLOCK_BRIDGE(dev) spin_unlock_bh(&(dev)->BridgeLock) - -static inline void FreeBtOsBuf(struct ar6k_hci_bridge_info *pHcidevInfo, void *osbuf) -{ - if (pHcidevInfo->HciNormalMode) { - bt_free_buffer(pHcidevInfo, (struct sk_buff *)osbuf); - } else { - /* in test mode, these are just ordinary netbuf allocations */ - A_NETBUF_FREE(osbuf); - } -} - -static void FreeHTCStruct(struct ar6k_hci_bridge_info *pHcidevInfo, struct htc_packet *pPacket) -{ - LOCK_BRIDGE(pHcidevInfo); - HTC_PACKET_ENQUEUE(&pHcidevInfo->HTCPacketStructHead,pPacket); - UNLOCK_BRIDGE(pHcidevInfo); -} - -static struct htc_packet * AllocHTCStruct(struct ar6k_hci_bridge_info *pHcidevInfo) -{ - struct htc_packet *pPacket = NULL; - LOCK_BRIDGE(pHcidevInfo); - pPacket = HTC_PACKET_DEQUEUE(&pHcidevInfo->HTCPacketStructHead); - UNLOCK_BRIDGE(pHcidevInfo); - return pPacket; -} - -#define BLOCK_ROUND_UP_PWR2(x, align) (((int) (x) + ((align)-1)) & ~((align)-1)) - -static void RefillRecvBuffers(struct ar6k_hci_bridge_info *pHcidevInfo, - HCI_TRANSPORT_PACKET_TYPE Type, - int NumBuffers) -{ - int length, i; - void *osBuf = NULL; - struct htc_packet_queue queue; - struct htc_packet *pPacket; - - INIT_HTC_PACKET_QUEUE(&queue); - - if (Type == HCI_ACL_TYPE) { - if (pHcidevInfo->HciNormalMode) { - length = HCI_MAX_FRAME_SIZE; - } else { - length = MAX_ACL_RECV_LENGTH; - } - } else { - length = MAX_EVT_RECV_LENGTH; - } - - /* add on transport head and tail room */ - length += pHcidevInfo->HCIProps.HeadRoom + pHcidevInfo->HCIProps.TailRoom; - /* round up to the required I/O padding */ - length = BLOCK_ROUND_UP_PWR2(length,pHcidevInfo->HCIProps.IOBlockPad); - - for (i = 0; i < NumBuffers; i++) { - - if (pHcidevInfo->HciNormalMode) { - osBuf = bt_alloc_buffer(pHcidevInfo,length); - } else { - osBuf = A_NETBUF_ALLOC(length); - } - - if (NULL == osBuf) { - break; - } - - pPacket = AllocHTCStruct(pHcidevInfo); - if (NULL == pPacket) { - FreeBtOsBuf(pHcidevInfo,osBuf); - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to alloc HTC struct \n")); - break; - } - - SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),length,Type); - /* add to queue */ - HTC_PACKET_ENQUEUE(&queue,pPacket); - } - - if (i > 0) { - HCI_TransportAddReceivePkts(pHcidevInfo->pHCIDev, &queue); - } -} - -#define HOST_INTEREST_ITEM_ADDRESS(ar, item) \ - (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_HOST_INTEREST_ITEM_ADDRESS(item) : \ - (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_HOST_INTEREST_ITEM_ADDRESS(item) : 0)) -static int ar6000_hci_transport_ready(HCI_TRANSPORT_HANDLE HCIHandle, - struct hci_transport_properties *pProps, - void *pContext) -{ - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)pContext; - int status; - u32 address, hci_uart_pwr_mgmt_params; -// struct ar3k_config_info ar3kconfig; - - pHcidevInfo->pHCIDev = HCIHandle; - - memcpy(&pHcidevInfo->HCIProps,pProps,sizeof(*pProps)); - - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_BRIDGE,("HCI ready (hci:0x%lX, headroom:%d, tailroom:%d blockpad:%d) \n", - (unsigned long)HCIHandle, - pHcidevInfo->HCIProps.HeadRoom, - pHcidevInfo->HCIProps.TailRoom, - pHcidevInfo->HCIProps.IOBlockPad)); - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - A_ASSERT((pProps->HeadRoom + pProps->TailRoom) <= (struct net_device *)(pHcidevInfo->HCITransHdl.netDevice)->hard_header_len); -#else - A_ASSERT((pProps->HeadRoom + pProps->TailRoom) <= pHcidevInfo->ar->arNetDev->hard_header_len); -#endif - - /* provide buffers */ - RefillRecvBuffers(pHcidevInfo, HCI_ACL_TYPE, MAX_ACL_RECV_BUFS); - RefillRecvBuffers(pHcidevInfo, HCI_EVENT_TYPE, MAX_EVT_RECV_BUFS); - - do { - /* start transport */ - status = HCI_TransportStart(pHcidevInfo->pHCIDev); - - if (status) { - break; - } - - if (!pHcidevInfo->HciNormalMode) { - /* in test mode, no need to go any further */ - break; - } - - // The delay is required when AR6K is driving the BT reset line - // where time is needed after the BT chip is out of reset (HCI_TransportStart) - // and before the first HCI command is issued (AR3KConfigure) - // FIXME - // The delay should be configurable and be only applied when AR6K driving the BT - // reset line. This could be done by some module parameter or based on some HW config - // info. For now apply 100ms delay blindly - A_MDELAY(100); - - A_MEMZERO(&ar3kconfig,sizeof(ar3kconfig)); - ar3kconfig.pHCIDev = pHcidevInfo->pHCIDev; - ar3kconfig.pHCIProps = &pHcidevInfo->HCIProps; -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - ar3kconfig.pHIFDevice = (struct hif_device *)(pHcidevInfo->HCITransHdl.hifDevice); -#else - ar3kconfig.pHIFDevice = pHcidevInfo->ar->arHifDevice; -#endif - ar3kconfig.pBtStackHCIDev = pHcidevInfo->pBtStackHCIDev; - - if (ar3khcibaud != 0) { - /* user wants ar3k baud rate change */ - ar3kconfig.Flags |= AR3K_CONFIG_FLAG_SET_AR3K_BAUD; - ar3kconfig.Flags |= AR3K_CONFIG_FLAG_AR3K_BAUD_CHANGE_DELAY; - ar3kconfig.AR3KBaudRate = ar3khcibaud; - } - - if ((hciuartscale != 0) || (hciuartstep != 0)) { - /* user wants to tune HCI bridge UART scale/step values */ - ar3kconfig.AR6KScale = (u16)hciuartscale; - ar3kconfig.AR6KStep = (u16)hciuartstep; - ar3kconfig.Flags |= AR3K_CONFIG_FLAG_SET_AR6K_SCALE_STEP; - } - - /* Fetch the address of the hi_hci_uart_pwr_mgmt_params instance in the host interest area */ - address = TARG_VTOP(pHcidevInfo->ar->arTargetType, - HOST_INTEREST_ITEM_ADDRESS(pHcidevInfo->ar, hi_hci_uart_pwr_mgmt_params)); - status = ar6000_ReadRegDiag(pHcidevInfo->ar->arHifDevice, &address, &hci_uart_pwr_mgmt_params); - if (0 == status) { - ar3kconfig.PwrMgmtEnabled = (hci_uart_pwr_mgmt_params & 0x1); - ar3kconfig.IdleTimeout = (hci_uart_pwr_mgmt_params & 0xFFFF0000) >> 16; - ar3kconfig.WakeupTimeout = (hci_uart_pwr_mgmt_params & 0xFF00) >> 8; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HCI Bridge: failed to read hci_uart_pwr_mgmt_params! \n")); - } - /* configure the AR3K device */ - memcpy(ar3kconfig.bdaddr,pHcidevInfo->ar->bdaddr,6); - status = AR3KConfigure(&ar3kconfig); - if (status) { - break; - } - - /* Make sure both AR6K and AR3K have power management enabled */ - if (ar3kconfig.PwrMgmtEnabled) { - status = HCI_TransportEnablePowerMgmt(pHcidevInfo->pHCIDev, true); - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HCI Bridge: failed to enable TLPM for AR6K! \n")); - } - } - - status = bt_register_hci(pHcidevInfo); - - } while (false); - - return status; -} - -static void ar6000_hci_transport_failure(void *pContext, int Status) -{ - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)pContext; - - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HCI Bridge: transport failure! \n")); - - if (pHcidevInfo->HciNormalMode) { - /* TODO .. */ - } -} - -static void ar6000_hci_transport_removed(void *pContext) -{ - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)pContext; - - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_BRIDGE, ("HCI Bridge: transport removed. \n")); - - A_ASSERT(pHcidevInfo->pHCIDev != NULL); - - HCI_TransportDetach(pHcidevInfo->pHCIDev); - bt_cleanup_hci(pHcidevInfo); - pHcidevInfo->pHCIDev = NULL; -} - -static void ar6000_hci_send_complete(void *pContext, struct htc_packet *pPacket) -{ - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)pContext; - void *osbuf = pPacket->pPktContext; - A_ASSERT(osbuf != NULL); - A_ASSERT(pHcidevInfo != NULL); - - if (pPacket->Status) { - if ((pPacket->Status != A_ECANCELED) && (pPacket->Status != A_NO_RESOURCE)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HCI Bridge: Send Packet Failed: %d \n",pPacket->Status)); - } - } - - FreeHTCStruct(pHcidevInfo,pPacket); - FreeBtOsBuf(pHcidevInfo,osbuf); - -} - -static void ar6000_hci_pkt_recv(void *pContext, struct htc_packet *pPacket) -{ - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)pContext; - struct sk_buff *skb; - - A_ASSERT(pHcidevInfo != NULL); - skb = (struct sk_buff *)pPacket->pPktContext; - A_ASSERT(skb != NULL); - - do { - - if (pPacket->Status) { - break; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_RECV, - ("HCI Bridge, packet received type : %d len:%d \n", - HCI_GET_PACKET_TYPE(pPacket),pPacket->ActualLength)); - - /* set the actual buffer position in the os buffer, HTC recv buffers posted to HCI are set - * to fill the front of the buffer */ - A_NETBUF_PUT(skb,pPacket->ActualLength + pHcidevInfo->HCIProps.HeadRoom); - A_NETBUF_PULL(skb,pHcidevInfo->HCIProps.HeadRoom); - - if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_HCI_DUMP)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ANY,("<<< Recv HCI %s packet len:%d \n", - (HCI_GET_PACKET_TYPE(pPacket) == HCI_EVENT_TYPE) ? "EVENT" : "ACL", - skb->len)); - AR_DEBUG_PRINTBUF(skb->data, skb->len,"BT HCI RECV Packet Dump"); - } - - if (pHcidevInfo->HciNormalMode) { - /* indicate the packet */ - if (bt_indicate_recv(pHcidevInfo,HCI_GET_PACKET_TYPE(pPacket),skb)) { - /* bt stack accepted the packet */ - skb = NULL; - } - break; - } - - /* for testing, indicate packet to the network stack */ -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - skb->dev = (struct net_device *)(pHcidevInfo->HCITransHdl.netDevice); - if ((((struct net_device *)pHcidevInfo->HCITransHdl.netDevice)->flags & IFF_UP) == IFF_UP) { - skb->protocol = eth_type_trans(skb, (struct net_device *)(pHcidevInfo->HCITransHdl.netDevice)); -#else - skb->dev = pHcidevInfo->ar->arNetDev; - if ((pHcidevInfo->ar->arNetDev->flags & IFF_UP) == IFF_UP) { - skb->protocol = eth_type_trans(skb, pHcidevInfo->ar->arNetDev); -#endif - netif_rx(skb); - skb = NULL; - } - - } while (false); - - FreeHTCStruct(pHcidevInfo,pPacket); - - if (skb != NULL) { - /* packet was not accepted, free it */ - FreeBtOsBuf(pHcidevInfo,skb); - } - -} - -static void ar6000_hci_pkt_refill(void *pContext, HCI_TRANSPORT_PACKET_TYPE Type, int BuffersAvailable) -{ - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)pContext; - int refillCount; - - if (Type == HCI_ACL_TYPE) { - refillCount = MAX_ACL_RECV_BUFS - BuffersAvailable; - } else { - refillCount = MAX_EVT_RECV_BUFS - BuffersAvailable; - } - - if (refillCount > 0) { - RefillRecvBuffers(pHcidevInfo,Type,refillCount); - } - -} - -static HCI_SEND_FULL_ACTION ar6000_hci_pkt_send_full(void *pContext, struct htc_packet *pPacket) -{ - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)pContext; - HCI_SEND_FULL_ACTION action = HCI_SEND_FULL_KEEP; - - if (!pHcidevInfo->HciNormalMode) { - /* for epping testing, check packet tag, some epping packets are - * special and cannot be dropped */ - if (HTC_GET_TAG_FROM_PKT(pPacket) == AR6K_DATA_PKT_TAG) { - action = HCI_SEND_FULL_DROP; - } - } - - return action; -} - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -int ar6000_setup_hci(void *ar) -#else -int ar6000_setup_hci(struct ar6_softc *ar) -#endif -{ - struct hci_transport_config_info config; - int status = 0; - int i; - struct htc_packet *pPacket; - struct ar6k_hci_bridge_info *pHcidevInfo; - - - do { - - pHcidevInfo = (struct ar6k_hci_bridge_info *)A_MALLOC(sizeof(struct ar6k_hci_bridge_info)); - - if (NULL == pHcidevInfo) { - status = A_NO_MEMORY; - break; - } - - A_MEMZERO(pHcidevInfo, sizeof(struct ar6k_hci_bridge_info)); -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - g_pHcidevInfo = pHcidevInfo; - pHcidevInfo->HCITransHdl = *(struct hci_transport_misc_handles *)ar; -#else - ar->hcidev_info = pHcidevInfo; - pHcidevInfo->ar = ar; -#endif - spin_lock_init(&pHcidevInfo->BridgeLock); - INIT_HTC_PACKET_QUEUE(&pHcidevInfo->HTCPacketStructHead); - - ar->exitCallback = AR3KConfigureExit; - - status = bt_setup_hci(pHcidevInfo); - if (status) { - break; - } - - if (pHcidevInfo->HciNormalMode) { - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_BRIDGE, ("HCI Bridge: running in normal mode... \n")); - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_BRIDGE, ("HCI Bridge: running in test mode... \n")); - } - - pHcidevInfo->pHTCStructAlloc = (u8 *)A_MALLOC((sizeof(struct htc_packet)) * NUM_HTC_PACKET_STRUCTS); - - if (NULL == pHcidevInfo->pHTCStructAlloc) { - status = A_NO_MEMORY; - break; - } - - pPacket = (struct htc_packet *)pHcidevInfo->pHTCStructAlloc; - for (i = 0; i < NUM_HTC_PACKET_STRUCTS; i++,pPacket++) { - FreeHTCStruct(pHcidevInfo,pPacket); - } - - A_MEMZERO(&config,sizeof(struct hci_transport_config_info)); - config.ACLRecvBufferWaterMark = MAX_ACL_RECV_BUFS / 2; - config.EventRecvBufferWaterMark = MAX_EVT_RECV_BUFS / 2; - config.MaxSendQueueDepth = MAX_HCI_WRITE_QUEUE_DEPTH; - config.pContext = pHcidevInfo; - config.TransportFailure = ar6000_hci_transport_failure; - config.TransportReady = ar6000_hci_transport_ready; - config.TransportRemoved = ar6000_hci_transport_removed; - config.pHCISendComplete = ar6000_hci_send_complete; - config.pHCIPktRecv = ar6000_hci_pkt_recv; - config.pHCIPktRecvRefill = ar6000_hci_pkt_refill; - config.pHCISendFull = ar6000_hci_pkt_send_full; - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - pHcidevInfo->pHCIDev = HCI_TransportAttach(pHcidevInfo->HCITransHdl.htcHandle, &config); -#else - pHcidevInfo->pHCIDev = HCI_TransportAttach(ar->arHtcTarget, &config); -#endif - - if (NULL == pHcidevInfo->pHCIDev) { - status = A_ERROR; - } - - } while (false); - - if (status) { - if (pHcidevInfo != NULL) { - if (NULL == pHcidevInfo->pHCIDev) { - /* GMBOX may not be present in older chips */ - /* just return success */ - status = 0; - } - } - ar6000_cleanup_hci(ar); - } - - return status; -} - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -void ar6000_cleanup_hci(void *ar) -#else -void ar6000_cleanup_hci(struct ar6_softc *ar) -#endif -{ -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - struct ar6k_hci_bridge_info *pHcidevInfo = g_pHcidevInfo; -#else - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)ar->hcidev_info; -#endif - - if (pHcidevInfo != NULL) { - bt_cleanup_hci(pHcidevInfo); - - if (pHcidevInfo->pHCIDev != NULL) { - HCI_TransportStop(pHcidevInfo->pHCIDev); - HCI_TransportDetach(pHcidevInfo->pHCIDev); - pHcidevInfo->pHCIDev = NULL; - } - - if (pHcidevInfo->pHTCStructAlloc != NULL) { - kfree(pHcidevInfo->pHTCStructAlloc); - pHcidevInfo->pHTCStructAlloc = NULL; - } - - kfree(pHcidevInfo); -#ifndef EXPORT_HCI_BRIDGE_INTERFACE - ar->hcidev_info = NULL; -#endif - } - - -} - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -int hci_test_send(void *ar, struct sk_buff *skb) -#else -int hci_test_send(struct ar6_softc *ar, struct sk_buff *skb) -#endif -{ - int status = 0; - int length; - EPPING_HEADER *pHeader; - struct htc_packet *pPacket; - HTC_TX_TAG htc_tag = AR6K_DATA_PKT_TAG; -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - struct ar6k_hci_bridge_info *pHcidevInfo = g_pHcidevInfo; -#else - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)ar->hcidev_info; -#endif - - do { - - if (NULL == pHcidevInfo) { - status = A_ERROR; - break; - } - - if (NULL == pHcidevInfo->pHCIDev) { - status = A_ERROR; - break; - } - - if (pHcidevInfo->HciNormalMode) { - /* this interface cannot run when normal WMI is running */ - status = A_ERROR; - break; - } - - pHeader = (EPPING_HEADER *)A_NETBUF_DATA(skb); - - if (!IS_EPPING_PACKET(pHeader)) { - status = A_EINVAL; - break; - } - - if (IS_EPING_PACKET_NO_DROP(pHeader)) { - htc_tag = AR6K_CONTROL_PKT_TAG; - } - - length = sizeof(EPPING_HEADER) + pHeader->DataLength; - - pPacket = AllocHTCStruct(pHcidevInfo); - if (NULL == pPacket) { - status = A_NO_MEMORY; - break; - } - - SET_HTC_PACKET_INFO_TX(pPacket, - skb, - A_NETBUF_DATA(skb), - length, - HCI_ACL_TYPE, /* send every thing out as ACL */ - htc_tag); - - HCI_TransportSendPkt(pHcidevInfo->pHCIDev,pPacket,false); - pPacket = NULL; - - } while (false); - - return status; -} - -void ar6000_set_default_ar3kconfig(struct ar6_softc *ar, void *ar3kconfig) -{ - struct ar6k_hci_bridge_info *pHcidevInfo = (struct ar6k_hci_bridge_info *)ar->hcidev_info; - struct ar3k_config_info *config = (struct ar3k_config_info *)ar3kconfig; - - config->pHCIDev = pHcidevInfo->pHCIDev; - config->pHCIProps = &pHcidevInfo->HCIProps; - config->pHIFDevice = ar->arHifDevice; - config->pBtStackHCIDev = pHcidevInfo->pBtStackHCIDev; - config->Flags |= AR3K_CONFIG_FLAG_SET_AR3K_BAUD; - config->AR3KBaudRate = 115200; -} - -#ifdef CONFIG_BLUEZ_HCI_BRIDGE -/*** BT Stack Entrypoints *******/ - -/* - * bt_open - open a handle to the device -*/ -static int bt_open(struct hci_dev *hdev) -{ - - AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HCI Bridge: bt_open - enter - x\n")); - set_bit(HCI_RUNNING, &hdev->flags); - set_bit(HCI_UP, &hdev->flags); - set_bit(HCI_INIT, &hdev->flags); - return 0; -} - -/* - * bt_close - close handle to the device -*/ -static int bt_close(struct hci_dev *hdev) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HCI Bridge: bt_close - enter\n")); - clear_bit(HCI_RUNNING, &hdev->flags); - return 0; -} - -/* - * bt_send_frame - send data frames -*/ -static int bt_send_frame(struct sk_buff *skb) -{ - struct hci_dev *hdev = (struct hci_dev *)skb->dev; - HCI_TRANSPORT_PACKET_TYPE type; - struct ar6k_hci_bridge_info *pHcidevInfo; - struct htc_packet *pPacket; - int status = 0; - struct sk_buff *txSkb = NULL; - - if (!hdev) { - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, ("HCI Bridge: bt_send_frame - no device\n")); - return -ENODEV; - } - - if (!test_bit(HCI_RUNNING, &hdev->flags)) { - AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HCI Bridge: bt_send_frame - not open\n")); - return -EBUSY; - } - - pHcidevInfo = (struct ar6k_hci_bridge_info *)hdev->driver_data; - A_ASSERT(pHcidevInfo != NULL); - - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_SEND, ("+bt_send_frame type: %d \n",bt_cb(skb)->pkt_type)); - type = HCI_COMMAND_TYPE; - - switch (bt_cb(skb)->pkt_type) { - case HCI_COMMAND_PKT: - type = HCI_COMMAND_TYPE; - hdev->stat.cmd_tx++; - break; - - case HCI_ACLDATA_PKT: - type = HCI_ACL_TYPE; - hdev->stat.acl_tx++; - break; - - case HCI_SCODATA_PKT: - /* we don't support SCO over the bridge */ - kfree_skb(skb); - return 0; - default: - A_ASSERT(false); - kfree_skb(skb); - return 0; - } - - if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_HCI_DUMP)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ANY,(">>> Send HCI %s packet len: %d\n", - (type == HCI_COMMAND_TYPE) ? "COMMAND" : "ACL", - skb->len)); - if (type == HCI_COMMAND_TYPE) { - u16 opcode = HCI_GET_OP_CODE(skb->data); - AR_DEBUG_PRINTF(ATH_DEBUG_ANY,(" HCI Command: OGF:0x%X OCF:0x%X \r\n", - opcode >> 10, opcode & 0x3FF)); - } - AR_DEBUG_PRINTBUF(skb->data,skb->len,"BT HCI SEND Packet Dump"); - } - - do { - - txSkb = bt_skb_alloc(TX_PACKET_RSV_OFFSET + pHcidevInfo->HCIProps.HeadRoom + - pHcidevInfo->HCIProps.TailRoom + skb->len, - GFP_ATOMIC); - - if (txSkb == NULL) { - status = A_NO_MEMORY; - break; - } - - bt_cb(txSkb)->pkt_type = bt_cb(skb)->pkt_type; - txSkb->dev = (void *)pHcidevInfo->pBtStackHCIDev; - skb_reserve(txSkb, TX_PACKET_RSV_OFFSET + pHcidevInfo->HCIProps.HeadRoom); - memcpy(txSkb->data, skb->data, skb->len); - skb_put(txSkb,skb->len); - - pPacket = AllocHTCStruct(pHcidevInfo); - if (NULL == pPacket) { - status = A_NO_MEMORY; - break; - } - - /* HCI packet length here doesn't include the 1-byte transport header which - * will be handled by the HCI transport layer. Enough headroom has already - * been reserved above for the transport header - */ - SET_HTC_PACKET_INFO_TX(pPacket, - txSkb, - txSkb->data, - txSkb->len, - type, - AR6K_CONTROL_PKT_TAG); /* HCI packets cannot be dropped */ - - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_SEND, ("HCI Bridge: bt_send_frame skb:0x%lX \n",(unsigned long)txSkb)); - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_SEND, ("HCI Bridge: type:%d, Total Length:%d Bytes \n", - type, txSkb->len)); - - status = HCI_TransportSendPkt(pHcidevInfo->pHCIDev,pPacket,false); - pPacket = NULL; - txSkb = NULL; - - } while (false); - - if (txSkb != NULL) { - kfree_skb(txSkb); - } - - kfree_skb(skb); - - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_SEND, ("-bt_send_frame \n")); - return 0; -} - -/* - * bt_ioctl - ioctl processing -*/ -static int bt_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HCI Bridge: bt_ioctl - enter\n")); - return -ENOIOCTLCMD; -} - -/* - * bt_flush - flush outstandingbpackets -*/ -static int bt_flush(struct hci_dev *hdev) -{ - struct ar6k_hci_bridge_info *pHcidevInfo; - - AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HCI Bridge: bt_flush - enter\n")); - - pHcidevInfo = (struct ar6k_hci_bridge_info *)hdev->driver_data; - - /* TODO??? */ - - return 0; -} - - -/* - * bt_destruct - -*/ -static void bt_destruct(struct hci_dev *hdev) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HCI Bridge: bt_destruct - enter\n")); - /* nothing to do here */ -} - -static int bt_setup_hci(struct ar6k_hci_bridge_info *pHcidevInfo) -{ - int status = 0; - struct hci_dev *pHciDev = NULL; - struct hif_device_os_device_info osDevInfo; - - if (!setupbtdev) { - return 0; - } - - do { - - A_MEMZERO(&osDevInfo,sizeof(osDevInfo)); - /* get the underlying OS device */ -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - status = ar6000_get_hif_dev((struct hif_device *)(pHcidevInfo->HCITransHdl.hifDevice), - &osDevInfo); -#else - status = HIFConfigureDevice(pHcidevInfo->ar->arHifDevice, - HIF_DEVICE_GET_OS_DEVICE, - &osDevInfo, - sizeof(osDevInfo)); -#endif - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to OS device info from HIF\n")); - break; - } - - /* allocate a BT HCI struct for this device */ - pHciDev = hci_alloc_dev(); - if (NULL == pHciDev) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HCI Bridge - failed to allocate bt struct \n")); - status = A_NO_MEMORY; - break; - } - /* save the device, we'll register this later */ - pHcidevInfo->pBtStackHCIDev = pHciDev; - SET_HCIDEV_DEV(pHciDev,osDevInfo.pOSDevice); - SET_HCI_BUS_TYPE(pHciDev, HCI_VIRTUAL, HCI_BREDR); - pHciDev->driver_data = pHcidevInfo; - pHciDev->open = bt_open; - pHciDev->close = bt_close; - pHciDev->send = bt_send_frame; - pHciDev->ioctl = bt_ioctl; - pHciDev->flush = bt_flush; - pHciDev->destruct = bt_destruct; - pHciDev->owner = THIS_MODULE; - /* driver is running in normal BT mode */ - pHcidevInfo->HciNormalMode = true; - - } while (false); - - if (status) { - bt_cleanup_hci(pHcidevInfo); - } - - return status; -} - -static void bt_cleanup_hci(struct ar6k_hci_bridge_info *pHcidevInfo) -{ - int err; - - if (pHcidevInfo->HciRegistered) { - pHcidevInfo->HciRegistered = false; - clear_bit(HCI_RUNNING, &pHcidevInfo->pBtStackHCIDev->flags); - clear_bit(HCI_UP, &pHcidevInfo->pBtStackHCIDev->flags); - clear_bit(HCI_INIT, &pHcidevInfo->pBtStackHCIDev->flags); - A_ASSERT(pHcidevInfo->pBtStackHCIDev != NULL); - /* unregister */ - if ((err = hci_unregister_dev(pHcidevInfo->pBtStackHCIDev)) < 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HCI Bridge: failed to unregister with bluetooth %d\n",err)); - } - } - - kfree(pHcidevInfo->pBtStackHCIDev); - pHcidevInfo->pBtStackHCIDev = NULL; -} - -static int bt_register_hci(struct ar6k_hci_bridge_info *pHcidevInfo) -{ - int err; - int status = 0; - - do { - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_BRIDGE, ("HCI Bridge: registering HCI... \n")); - A_ASSERT(pHcidevInfo->pBtStackHCIDev != NULL); - /* mark that we are registered */ - pHcidevInfo->HciRegistered = true; - if ((err = hci_register_dev(pHcidevInfo->pBtStackHCIDev)) < 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HCI Bridge: failed to register with bluetooth %d\n",err)); - pHcidevInfo->HciRegistered = false; - status = A_ERROR; - break; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_BRIDGE, ("HCI Bridge: HCI registered \n")); - - } while (false); - - return status; -} - -static bool bt_indicate_recv(struct ar6k_hci_bridge_info *pHcidevInfo, - HCI_TRANSPORT_PACKET_TYPE Type, - struct sk_buff *skb) -{ - u8 btType; - int len; - bool success = false; - BT_HCI_EVENT_HEADER *pEvent; - - do { - - if (!test_bit(HCI_RUNNING, &pHcidevInfo->pBtStackHCIDev->flags)) { - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, ("HCI Bridge: bt_indicate_recv - not running\n")); - break; - } - - switch (Type) { - case HCI_ACL_TYPE: - btType = HCI_ACLDATA_PKT; - break; - case HCI_EVENT_TYPE: - btType = HCI_EVENT_PKT; - break; - default: - btType = 0; - A_ASSERT(false); - break; - } - - if (0 == btType) { - break; - } - - /* set the final type */ - bt_cb(skb)->pkt_type = btType; - /* set dev */ - skb->dev = (void *)pHcidevInfo->pBtStackHCIDev; - len = skb->len; - - if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_HCI_RECV)) { - if (bt_cb(skb)->pkt_type == HCI_EVENT_PKT) { - pEvent = (BT_HCI_EVENT_HEADER *)skb->data; - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_RECV, ("BT HCI EventCode: %d, len:%d \n", - pEvent->EventCode, pEvent->ParamLength)); - } - } - - /* pass receive packet up the stack */ - if (hci_recv_frame(skb) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HCI Bridge: hci_recv_frame failed \n")); - break; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_HCI_RECV, - ("HCI Bridge: Indicated RCV of type:%d, Length:%d \n",btType,len)); - } - - success = true; - - } while (false); - - return success; -} - -static struct sk_buff* bt_alloc_buffer(struct ar6k_hci_bridge_info *pHcidevInfo, int Length) -{ - struct sk_buff *skb; - /* in normal HCI mode we need to alloc from the bt core APIs */ - skb = bt_skb_alloc(Length, GFP_ATOMIC); - if (NULL == skb) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to alloc bt sk_buff \n")); - } - return skb; -} - -static void bt_free_buffer(struct ar6k_hci_bridge_info *pHcidevInfo, struct sk_buff *skb) -{ - kfree_skb(skb); -} - -#else // { CONFIG_BLUEZ_HCI_BRIDGE - - /* stubs when we only want to test the HCI bridging Interface without the HT stack */ -static int bt_setup_hci(struct ar6k_hci_bridge_info *pHcidevInfo) -{ - return 0; -} -static void bt_cleanup_hci(struct ar6k_hci_bridge_info *pHcidevInfo) -{ - -} -static int bt_register_hci(struct ar6k_hci_bridge_info *pHcidevInfo) -{ - A_ASSERT(false); - return A_ERROR; -} - -static bool bt_indicate_recv(struct ar6k_hci_bridge_info *pHcidevInfo, - HCI_TRANSPORT_PACKET_TYPE Type, - struct sk_buff *skb) -{ - A_ASSERT(false); - return false; -} - -static struct sk_buff* bt_alloc_buffer(struct ar6k_hci_bridge_info *pHcidevInfo, int Length) -{ - A_ASSERT(false); - return NULL; -} -static void bt_free_buffer(struct ar6k_hci_bridge_info *pHcidevInfo, struct sk_buff *skb) -{ - A_ASSERT(false); -} - -#endif // } CONFIG_BLUEZ_HCI_BRIDGE - -#else // { ATH_AR6K_ENABLE_GMBOX - - /* stubs when GMBOX support is not needed */ - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -int ar6000_setup_hci(void *ar) -#else -int ar6000_setup_hci(struct ar6_softc *ar) -#endif -{ - return 0; -} - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -void ar6000_cleanup_hci(void *ar) -#else -void ar6000_cleanup_hci(struct ar6_softc *ar) -#endif -{ - return; -} - -#ifndef EXPORT_HCI_BRIDGE_INTERFACE -void ar6000_set_default_ar3kconfig(struct ar6_softc *ar, void *ar3kconfig) -{ - return; -} -#endif - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -int hci_test_send(void *ar, struct sk_buff *skb) -#else -int hci_test_send(struct ar6_softc *ar, struct sk_buff *skb) -#endif -{ - return -EOPNOTSUPP; -} - -#endif // } ATH_AR6K_ENABLE_GMBOX - - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -static int __init -hcibridge_init_module(void) -{ - int status; - struct hci_transport_callbacks hciTransCallbacks; - - hciTransCallbacks.setupTransport = ar6000_setup_hci; - hciTransCallbacks.cleanupTransport = ar6000_cleanup_hci; - - status = ar6000_register_hci_transport(&hciTransCallbacks); - if (status) - return -ENODEV; - - return 0; -} - -static void __exit -hcibridge_cleanup_module(void) -{ -} - -module_init(hcibridge_init_module); -module_exit(hcibridge_cleanup_module); -MODULE_LICENSE("Dual BSD/GPL"); -#endif diff --git a/drivers/staging/ath6kl/os/linux/include/ar6000_drv.h b/drivers/staging/ath6kl/os/linux/include/ar6000_drv.h deleted file mode 100644 index 80cef77738f..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/ar6000_drv.h +++ /dev/null @@ -1,776 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#ifndef _AR6000_H_ -#define _AR6000_H_ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/if_ether.h> -#include <linux/etherdevice.h> -#include <net/iw_handler.h> -#include <linux/if_arp.h> -#include <linux/ip.h> -#include <linux/wireless.h> -#include <net/cfg80211.h> -#include <linux/module.h> -#include <asm/io.h> - -#include <a_config.h> -#include <athdefs.h> -#include "a_osapi.h" -#include "htc_api.h" -#include "wmi.h" -#include "a_drv.h" -#include "bmi.h" -#include <ieee80211.h> -#include <ieee80211_ioctl.h> -#include <wlan_api.h> -#include <wmi_api.h> -#include "pkt_log.h" -#include "aggr_recv_api.h" -#include <host_version.h> -#include <linux/rtnetlink.h> -#include <linux/moduleparam.h> -#include "ar6000_api.h" -#ifdef CONFIG_HOST_TCMD_SUPPORT -#include <testcmd.h> -#endif -#include <linux/firmware.h> - -#include "targaddrs.h" -#include "dbglog_api.h" -#include "ar6000_diag.h" -#include "common_drv.h" -#include "roaming.h" -#include "hci_transport_api.h" -#define ATH_MODULE_NAME driver -#include "a_debug.h" -#include "hw/apb_map.h" -#include "hw/rtc_reg.h" -#include "hw/mbox_reg.h" -#include "gpio_reg.h" - -#define ATH_DEBUG_DBG_LOG ATH_DEBUG_MAKE_MODULE_MASK(0) -#define ATH_DEBUG_WLAN_CONNECT ATH_DEBUG_MAKE_MODULE_MASK(1) -#define ATH_DEBUG_WLAN_SCAN ATH_DEBUG_MAKE_MODULE_MASK(2) -#define ATH_DEBUG_WLAN_TX ATH_DEBUG_MAKE_MODULE_MASK(3) -#define ATH_DEBUG_WLAN_RX ATH_DEBUG_MAKE_MODULE_MASK(4) -#define ATH_DEBUG_HTC_RAW ATH_DEBUG_MAKE_MODULE_MASK(5) -#define ATH_DEBUG_HCI_BRIDGE ATH_DEBUG_MAKE_MODULE_MASK(6) -#define ATH_DEBUG_HCI_RECV ATH_DEBUG_MAKE_MODULE_MASK(7) -#define ATH_DEBUG_HCI_SEND ATH_DEBUG_MAKE_MODULE_MASK(8) -#define ATH_DEBUG_HCI_DUMP ATH_DEBUG_MAKE_MODULE_MASK(9) - -#ifndef __dev_put -#define __dev_put(dev) dev_put(dev) -#endif - - -#define USER_SAVEDKEYS_STAT_INIT 0 -#define USER_SAVEDKEYS_STAT_RUN 1 - -// TODO this needs to move into the AR_SOFTC struct -struct USER_SAVEDKEYS { - struct ieee80211req_key ucast_ik; - struct ieee80211req_key bcast_ik; - CRYPTO_TYPE keyType; - bool keyOk; -}; - -#define DBG_INFO 0x00000001 -#define DBG_ERROR 0x00000002 -#define DBG_WARNING 0x00000004 -#define DBG_SDIO 0x00000008 -#define DBG_HIF 0x00000010 -#define DBG_HTC 0x00000020 -#define DBG_WMI 0x00000040 -#define DBG_WMI2 0x00000080 -#define DBG_DRIVER 0x00000100 - -#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING) - - -int ar6000_ReadRegDiag(struct hif_device *hifDevice, u32 *address, u32 *data); -int ar6000_WriteRegDiag(struct hif_device *hifDevice, u32 *address, u32 *data); - -#ifdef __cplusplus -extern "C" { -#endif - -#define MAX_AR6000 1 -#define AR6000_MAX_RX_BUFFERS 16 -#define AR6000_BUFFER_SIZE 1664 -#define AR6000_MAX_AMSDU_RX_BUFFERS 4 -#define AR6000_AMSDU_REFILL_THRESHOLD 3 -#define AR6000_AMSDU_BUFFER_SIZE (WMI_MAX_AMSDU_RX_DATA_FRAME_LENGTH + 128) -#define AR6000_MAX_RX_MESSAGE_SIZE (max(WMI_MAX_NORMAL_RX_DATA_FRAME_LENGTH,WMI_MAX_AMSDU_RX_DATA_FRAME_LENGTH)) - -#define AR6000_TX_TIMEOUT 10 -#define AR6000_ETH_ADDR_LEN 6 -#define AR6000_MAX_ENDPOINTS 4 -#define MAX_NODE_NUM 15 -/* MAX_HI_COOKIE_NUM are reserved for high priority traffic */ -#define MAX_DEF_COOKIE_NUM 180 -#define MAX_HI_COOKIE_NUM 18 /* 10% of MAX_COOKIE_NUM */ -#define MAX_COOKIE_NUM (MAX_DEF_COOKIE_NUM + MAX_HI_COOKIE_NUM) - -/* MAX_DEFAULT_SEND_QUEUE_DEPTH is used to set the default queue depth for the - * WMM send queues. If a queue exceeds this depth htc will query back to the - * OS specific layer by calling EpSendFull(). This gives the OS layer the - * opportunity to drop the packet if desired. Therefore changing - * MAX_DEFAULT_SEND_QUEUE_DEPTH does not affect resource utilization but - * does impact the threshold used to identify if a packet should be - * dropped. */ -#define MAX_DEFAULT_SEND_QUEUE_DEPTH (MAX_DEF_COOKIE_NUM / WMM_NUM_AC) - -#define AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT 1 -#define AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT 1 -#define A_DISCONNECT_TIMER_INTERVAL 10 * 1000 -#define A_DEFAULT_LISTEN_INTERVAL 100 -#define A_MAX_WOW_LISTEN_INTERVAL 1000 - -enum { - DRV_HB_CHALLENGE = 0, - APP_HB_CHALLENGE -}; - -enum { - WLAN_INIT_MODE_NONE = 0, - WLAN_INIT_MODE_USR, - WLAN_INIT_MODE_UDEV, - WLAN_INIT_MODE_DRV -}; - -/* Suspend - configuration */ -enum { - WLAN_SUSPEND_CUT_PWR = 0, - WLAN_SUSPEND_DEEP_SLEEP, - WLAN_SUSPEND_WOW, - WLAN_SUSPEND_CUT_PWR_IF_BT_OFF -}; - -/* WiFi OFF - configuration */ -enum { - WLAN_OFF_CUT_PWR = 0, - WLAN_OFF_DEEP_SLEEP, -}; - -/* WLAN low power state */ -enum { - WLAN_POWER_STATE_ON = 0, - WLAN_POWER_STATE_CUT_PWR = 1, - WLAN_POWER_STATE_DEEP_SLEEP, - WLAN_POWER_STATE_WOW -}; - -/* WLAN WoW State */ -enum { - WLAN_WOW_STATE_NONE = 0, - WLAN_WOW_STATE_SUSPENDED, - WLAN_WOW_STATE_SUSPENDING -}; - - -typedef enum _AR6K_BIN_FILE { - AR6K_OTP_FILE, - AR6K_FIRMWARE_FILE, - AR6K_PATCH_FILE, - AR6K_BOARD_DATA_FILE, -} AR6K_BIN_FILE; - -#ifdef SETUPHCI_ENABLED -#define SETUPHCI_DEFAULT 1 -#else -#define SETUPHCI_DEFAULT 0 -#endif /* SETUPHCI_ENABLED */ - -#ifdef SETUPBTDEV_ENABLED -#define SETUPBTDEV_DEFAULT 1 -#else -#define SETUPBTDEV_DEFAULT 0 -#endif /* SETUPBTDEV_ENABLED */ - -#ifdef ENABLEUARTPRINT_SET -#define ENABLEUARTPRINT_DEFAULT 1 -#else -#define ENABLEUARTPRINT_DEFAULT 0 -#endif /* ENABLEARTPRINT_SET */ - -#ifdef ATH6KL_CONFIG_HIF_VIRTUAL_SCATTER -#define NOHIFSCATTERSUPPORT_DEFAULT 1 -#else /* ATH6KL_CONFIG_HIF_VIRTUAL_SCATTER */ -#define NOHIFSCATTERSUPPORT_DEFAULT 0 -#endif /* ATH6KL_CONFIG_HIF_VIRTUAL_SCATTER */ - - -#if defined(CONFIG_ATH6KL_ENABLE_COEXISTENCE) - -#ifdef CONFIG_AR600x_BT_QCOM -#define ATH6KL_BT_DEV 1 -#elif defined(CONFIG_AR600x_BT_CSR) -#define ATH6KL_BT_DEV 2 -#else -#define ATH6KL_BT_DEV 3 -#endif - -#ifdef CONFIG_AR600x_DUAL_ANTENNA -#define ATH6KL_BT_ANTENNA 2 -#else -#define ATH6KL_BT_ANTENNA 1 -#endif - -#endif /* CONFIG_ATH6KL_ENABLE_COEXISTENCE */ - -#ifdef AR600x_BT_AR3001 -#define AR3KHCIBAUD_DEFAULT 3000000 -#define HCIUARTSCALE_DEFAULT 1 -#define HCIUARTSTEP_DEFAULT 8937 -#else -#define AR3KHCIBAUD_DEFAULT 0 -#define HCIUARTSCALE_DEFAULT 0 -#define HCIUARTSTEP_DEFAULT 0 -#endif /* AR600x_BT_AR3001 */ - -#define WLAN_INIT_MODE_DEFAULT WLAN_INIT_MODE_DRV - -#define AR6K_PATCH_DOWNLOAD_ADDRESS(_param, _ver) do { \ - if ((_ver) == AR6003_REV1_VERSION) { \ - (_param) = AR6003_REV1_PATCH_DOWNLOAD_ADDRESS; \ - } else if ((_ver) == AR6003_REV2_VERSION) { \ - (_param) = AR6003_REV2_PATCH_DOWNLOAD_ADDRESS; \ - } else { \ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown Version: %d\n", _ver)); \ - A_ASSERT(0); \ - } \ -} while (0) - -#define AR6K_DATA_DOWNLOAD_ADDRESS(_param, _ver) do { \ - if ((_ver) == AR6003_REV1_VERSION) { \ - (_param) = AR6003_REV1_DATA_DOWNLOAD_ADDRESS; \ - } else if ((_ver) == AR6003_REV2_VERSION) { \ - (_param) = AR6003_REV2_DATA_DOWNLOAD_ADDRESS; \ - } else { \ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown Version: %d\n", _ver)); \ - A_ASSERT(0); \ - } \ -} while (0) - -#define AR6K_DATASET_PATCH_ADDRESS(_param, _ver) do { \ - if ((_ver) == AR6003_REV2_VERSION) { \ - (_param) = AR6003_REV2_DATASET_PATCH_ADDRESS; \ - } else if ((_ver) == AR6003_REV3_VERSION) { \ - (_param) = AR6003_REV3_DATASET_PATCH_ADDRESS; \ - } else { \ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown Version: %d\n", _ver)); \ - A_ASSERT(0); \ - } \ -} while (0) - -#define AR6K_APP_LOAD_ADDRESS(_param, _ver) do { \ - if ((_ver) == AR6003_REV2_VERSION) { \ - (_param) = AR6003_REV2_APP_LOAD_ADDRESS; \ - } else if ((_ver) == AR6003_REV3_VERSION) { \ - (_param) = AR6003_REV3_APP_LOAD_ADDRESS; \ - } else { \ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown Version: %d\n", _ver)); \ - A_ASSERT(0); \ - } \ -} while (0) - -#define AR6K_APP_START_OVERRIDE_ADDRESS(_param, _ver) do { \ - if ((_ver) == AR6003_REV2_VERSION) { \ - (_param) = AR6003_REV2_APP_START_OVERRIDE; \ - } else if ((_ver) == AR6003_REV3_VERSION) { \ - (_param) = AR6003_REV3_APP_START_OVERRIDE; \ - } else { \ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown Version: %d\n", _ver)); \ - A_ASSERT(0); \ - } \ -} while (0) - -/* AR6003 1.0 definitions */ -#define AR6003_REV1_VERSION 0x300002ba -#define AR6003_REV1_DATA_DOWNLOAD_ADDRESS AR6003_REV1_OTP_DATA_ADDRESS -#define AR6003_REV1_PATCH_DOWNLOAD_ADDRESS 0x57ea6c -#define AR6003_REV1_OTP_FILE "ath6k/AR6003/hw1.0/otp.bin.z77" -#define AR6003_REV1_FIRMWARE_FILE "ath6k/AR6003/hw1.0/athwlan.bin.z77" -#define AR6003_REV1_TCMD_FIRMWARE_FILE "ath6k/AR6003/hw1.0/athtcmd_ram.bin" -#define AR6003_REV1_ART_FIRMWARE_FILE "ath6k/AR6003/hw1.0/device.bin" -#define AR6003_REV1_PATCH_FILE "ath6k/AR6003/hw1.0/data.patch.bin" -#define AR6003_REV1_EPPING_FIRMWARE_FILE "ath6k/AR6003/hw1.0/endpointping.bin" -#ifdef CONFIG_AR600x_SD31_XXX -#define AR6003_REV1_BOARD_DATA_FILE "ath6k/AR6003/hw1.0/bdata.SD31.bin" -#elif defined(CONFIG_AR600x_SD32_XXX) -#define AR6003_REV1_BOARD_DATA_FILE "ath6k/AR6003/hw1.0/bdata.SD32.bin" -#elif defined(CONFIG_AR600x_WB31_XXX) -#define AR6003_REV1_BOARD_DATA_FILE "ath6k/AR6003/hw1.0/bdata.WB31.bin" -#else -#define AR6003_REV1_BOARD_DATA_FILE "ath6k/AR6003/hw1.0/bdata.CUSTOM.bin" -#endif /* Board Data File */ - -/* AR6003 2.0 definitions */ -#define AR6003_REV2_VERSION 0x30000384 -#define AR6003_REV2_DATA_DOWNLOAD_ADDRESS AR6003_REV2_OTP_DATA_ADDRESS -#define AR6003_REV2_PATCH_DOWNLOAD_ADDRESS 0x57e910 -#define AR6003_REV2_OTP_FILE "ath6k/AR6003/hw2.0/otp.bin.z77" -#define AR6003_REV2_FIRMWARE_FILE "ath6k/AR6003/hw2.0/athwlan.bin.z77" -#define AR6003_REV2_TCMD_FIRMWARE_FILE "ath6k/AR6003/hw2.0/athtcmd_ram.bin" -#define AR6003_REV2_ART_FIRMWARE_FILE "ath6k/AR6003/hw2.0/device.bin" -#define AR6003_REV2_PATCH_FILE "ath6k/AR6003/hw2.0/data.patch.bin" -#define AR6003_REV2_EPPING_FIRMWARE_FILE "ath6k/AR6003/hw2.0/endpointping.bin" -#ifdef CONFIG_AR600x_SD31_XXX -#define AR6003_REV2_BOARD_DATA_FILE "ath6k/AR6003/hw2.0/bdata.SD31.bin" -#elif defined(CONFIG_AR600x_SD32_XXX) -#define AR6003_REV2_BOARD_DATA_FILE "ath6k/AR6003/hw2.0/bdata.SD32.bin" -#elif defined(CONFIG_AR600x_WB31_XXX) -#define AR6003_REV2_BOARD_DATA_FILE "ath6k/AR6003/hw2.0/bdata.WB31.bin" -#else -#define AR6003_REV2_BOARD_DATA_FILE "ath6k/AR6003/hw2.0/bdata.CUSTOM.bin" -#endif /* Board Data File */ - -/* AR6003 3.0 definitions */ -#define AR6003_REV3_VERSION 0x30000582 -#define AR6003_REV3_OTP_FILE "ath6k/AR6003/hw2.1.1/otp.bin" -#define AR6003_REV3_FIRMWARE_FILE "ath6k/AR6003/hw2.1.1/athwlan.bin" -#define AR6003_REV3_TCMD_FIRMWARE_FILE "ath6k/AR6003/hw2.1.1/athtcmd_ram.bin" -#define AR6003_REV3_ART_FIRMWARE_FILE "ath6k/AR6003/hw2.1.1/device.bin" -#define AR6003_REV3_PATCH_FILE "ath6k/AR6003/hw2.1.1/data.patch.bin" -#define AR6003_REV3_EPPING_FIRMWARE_FILE "ath6k/AR6003/hw2.1.1/endpointping.bin" -#ifdef CONFIG_AR600x_SD31_XXX -#define AR6003_REV3_BOARD_DATA_FILE "ath6k/AR6003/hw2.1.1/bdata.SD31.bin" -#elif defined(CONFIG_AR600x_SD32_XXX) -#define AR6003_REV3_BOARD_DATA_FILE "ath6k/AR6003/hw2.1.1/bdata.SD32.bin" -#elif defined(CONFIG_AR600x_WB31_XXX) -#define AR6003_REV3_BOARD_DATA_FILE "ath6k/AR6003/hw2.1.1/bdata.WB31.bin" -#else -#define AR6003_REV3_BOARD_DATA_FILE "ath6k/AR6003/hw2.1.1/bdata.CUSTOM.bin" -#endif /* Board Data File */ - - -/* Power states */ -enum { - WLAN_PWR_CTRL_UP = 0, - WLAN_PWR_CTRL_CUT_PWR, - WLAN_PWR_CTRL_DEEP_SLEEP, - WLAN_PWR_CTRL_WOW, - WLAN_PWR_CTRL_DEEP_SLEEP_DISABLED -}; - -/* HTC RAW streams */ -typedef enum _HTC_RAW_STREAM_ID { - HTC_RAW_STREAM_NOT_MAPPED = -1, - HTC_RAW_STREAM_0 = 0, - HTC_RAW_STREAM_1 = 1, - HTC_RAW_STREAM_2 = 2, - HTC_RAW_STREAM_3 = 3, - HTC_RAW_STREAM_NUM_MAX -} HTC_RAW_STREAM_ID; - -#define RAW_HTC_READ_BUFFERS_NUM 4 -#define RAW_HTC_WRITE_BUFFERS_NUM 4 - -#define HTC_RAW_BUFFER_SIZE 1664 - -typedef struct { - int currPtr; - int length; - unsigned char data[HTC_RAW_BUFFER_SIZE]; - struct htc_packet HTCPacket; -} raw_htc_buffer; - -#ifdef CONFIG_HOST_TCMD_SUPPORT -/* - * add TCMD_MODE besides wmi and bypasswmi - * in TCMD_MODE, only few TCMD releated wmi commands - * counld be hanlder - */ -enum { - AR6000_WMI_MODE = 0, - AR6000_BYPASS_MODE, - AR6000_TCMD_MODE, - AR6000_WLAN_MODE -}; -#endif /* CONFIG_HOST_TCMD_SUPPORT */ - -struct ar_wep_key { - u8 arKeyIndex; - u8 arKeyLen; - u8 arKey[64]; -} ; - -struct ar_key { - u8 key[WLAN_MAX_KEY_LEN]; - u8 key_len; - u8 seq[IW_ENCODE_SEQ_MAX_SIZE]; - u8 seq_len; - u32 cipher; -}; - -enum { - SME_DISCONNECTED, - SME_CONNECTING, - SME_CONNECTED -}; - -struct ar_node_mapping { - u8 macAddress[6]; - u8 epId; - u8 txPending; -}; - -struct ar_cookie { - unsigned long arc_bp[2]; /* Must be first field */ - struct htc_packet HtcPkt; /* HTC packet wrapper */ - struct ar_cookie *arc_list_next; -}; - -struct ar_hb_chlng_resp { - A_TIMER timer; - u32 frequency; - u32 seqNum; - bool outstanding; - u8 missCnt; - u8 missThres; -}; - -/* Per STA data, used in AP mode */ -/*TODO: All this should move to OS independent dir */ - -#define STA_PWR_MGMT_MASK 0x1 -#define STA_PWR_MGMT_SHIFT 0x0 -#define STA_PWR_MGMT_AWAKE 0x0 -#define STA_PWR_MGMT_SLEEP 0x1 - -#define STA_SET_PWR_SLEEP(sta) (sta->flags |= (STA_PWR_MGMT_MASK << STA_PWR_MGMT_SHIFT)) -#define STA_CLR_PWR_SLEEP(sta) (sta->flags &= ~(STA_PWR_MGMT_MASK << STA_PWR_MGMT_SHIFT)) -#define STA_IS_PWR_SLEEP(sta) ((sta->flags >> STA_PWR_MGMT_SHIFT) & STA_PWR_MGMT_MASK) - -#define STA_PS_POLLED_MASK 0x1 -#define STA_PS_POLLED_SHIFT 0x1 -#define STA_SET_PS_POLLED(sta) (sta->flags |= (STA_PS_POLLED_MASK << STA_PS_POLLED_SHIFT)) -#define STA_CLR_PS_POLLED(sta) (sta->flags &= ~(STA_PS_POLLED_MASK << STA_PS_POLLED_SHIFT)) -#define STA_IS_PS_POLLED(sta) (sta->flags & (STA_PS_POLLED_MASK << STA_PS_POLLED_SHIFT)) - -typedef struct { - u16 flags; - u8 mac[ATH_MAC_LEN]; - u8 aid; - u8 keymgmt; - u8 ucipher; - u8 auth; - u8 wpa_ie[IEEE80211_MAX_IE]; - A_NETBUF_QUEUE_T psq; /* power save q */ - A_MUTEX_T psqLock; -} sta_t; - -typedef struct ar6_raw_htc { - HTC_ENDPOINT_ID arRaw2EpMapping[HTC_RAW_STREAM_NUM_MAX]; - HTC_RAW_STREAM_ID arEp2RawMapping[ENDPOINT_MAX]; - struct semaphore raw_htc_read_sem[HTC_RAW_STREAM_NUM_MAX]; - struct semaphore raw_htc_write_sem[HTC_RAW_STREAM_NUM_MAX]; - wait_queue_head_t raw_htc_read_queue[HTC_RAW_STREAM_NUM_MAX]; - wait_queue_head_t raw_htc_write_queue[HTC_RAW_STREAM_NUM_MAX]; - raw_htc_buffer raw_htc_read_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_READ_BUFFERS_NUM]; - raw_htc_buffer raw_htc_write_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_WRITE_BUFFERS_NUM]; - bool write_buffer_available[HTC_RAW_STREAM_NUM_MAX]; - bool read_buffer_available[HTC_RAW_STREAM_NUM_MAX]; -} AR_RAW_HTC_T; - -struct ar6_softc { - struct net_device *arNetDev; /* net_device pointer */ - void *arWmi; - int arTxPending[ENDPOINT_MAX]; - int arTotalTxDataPending; - u8 arNumDataEndPts; - bool arWmiEnabled; - bool arWmiReady; - bool arConnected; - HTC_HANDLE arHtcTarget; - void *arHifDevice; - spinlock_t arLock; - struct semaphore arSem; - int arSsidLen; - u_char arSsid[32]; - u8 arNextMode; - u8 arNetworkType; - u8 arDot11AuthMode; - u8 arAuthMode; - u8 arPairwiseCrypto; - u8 arPairwiseCryptoLen; - u8 arGroupCrypto; - u8 arGroupCryptoLen; - u8 arDefTxKeyIndex; - struct ar_wep_key arWepKeyList[WMI_MAX_KEY_INDEX + 1]; - u8 arBssid[6]; - u8 arReqBssid[6]; - u16 arChannelHint; - u16 arBssChannel; - u16 arListenIntervalB; - u16 arListenIntervalT; - struct ar6000_version arVersion; - u32 arTargetType; - s8 arRssi; - u8 arTxPwr; - bool arTxPwrSet; - s32 arBitRate; - struct net_device_stats arNetStats; - struct iw_statistics arIwStats; - s8 arNumChannels; - u16 arChannelList[32]; - u32 arRegCode; - bool statsUpdatePending; - TARGET_STATS arTargetStats; - s8 arMaxRetries; - u8 arPhyCapability; -#ifdef CONFIG_HOST_TCMD_SUPPORT - u32 arTargetMode; - void *tcmd_rx_report; - int tcmd_rx_report_len; -#endif - AR6000_WLAN_STATE arWlanState; - struct ar_node_mapping arNodeMap[MAX_NODE_NUM]; - u8 arIbssPsEnable; - u8 arNodeNum; - u8 arNexEpId; - struct ar_cookie *arCookieList; - u32 arCookieCount; - u32 arRateMask; - u8 arSkipScan; - u16 arBeaconInterval; - bool arConnectPending; - bool arWmmEnabled; - struct ar_hb_chlng_resp arHBChallengeResp; - u8 arKeepaliveConfigured; - u32 arMgmtFilter; - HTC_ENDPOINT_ID arAc2EpMapping[WMM_NUM_AC]; - bool arAcStreamActive[WMM_NUM_AC]; - u8 arAcStreamPriMap[WMM_NUM_AC]; - u8 arHiAcStreamActivePri; - u8 arEp2AcMapping[ENDPOINT_MAX]; - HTC_ENDPOINT_ID arControlEp; -#ifdef HTC_RAW_INTERFACE - AR_RAW_HTC_T *arRawHtc; -#endif - bool arNetQueueStopped; - bool arRawIfInit; - int arDeviceIndex; - struct common_credit_state_info arCreditStateInfo; - bool arWMIControlEpFull; - bool dbgLogFetchInProgress; - u8 log_buffer[DBGLOG_HOST_LOG_BUFFER_SIZE]; - u32 log_cnt; - u32 dbglog_init_done; - u32 arConnectCtrlFlags; - s32 user_savedkeys_stat; - u32 user_key_ctrl; - struct USER_SAVEDKEYS user_saved_keys; - USER_RSSI_THOLD rssi_map[12]; - u8 arUserBssFilter; - u16 ap_profile_flag; /* AP mode */ - WMI_AP_ACL g_acl; /* AP mode */ - sta_t sta_list[AP_MAX_NUM_STA]; /* AP mode */ - u8 sta_list_index; /* AP mode */ - struct ieee80211req_key ap_mode_bkey; /* AP mode */ - A_NETBUF_QUEUE_T mcastpsq; /* power save q for Mcast frames */ - A_MUTEX_T mcastpsqLock; - bool DTIMExpired; /* flag to indicate DTIM expired */ - u8 intra_bss; /* enable/disable intra bss data forward */ - void *aggr_cntxt; -#ifndef EXPORT_HCI_BRIDGE_INTERFACE - void *hcidev_info; -#endif - WMI_AP_MODE_STAT arAPStats; - u8 ap_hidden_ssid; - u8 ap_country_code[3]; - u8 ap_wmode; - u8 ap_dtim_period; - u16 ap_beacon_interval; - u16 arRTS; - u16 arACS; /* AP mode - Auto Channel Selection */ - struct htc_packet_queue amsdu_rx_buffer_queue; - bool bIsDestroyProgress; /* flag to indicate ar6k destroy is in progress */ - A_TIMER disconnect_timer; - u8 rxMetaVersion; -#ifdef WAPI_ENABLE - u8 arWapiEnable; -#endif - WMI_BTCOEX_CONFIG_EVENT arBtcoexConfig; - WMI_BTCOEX_STATS_EVENT arBtcoexStats; - s32 (*exitCallback)(void *config); /* generic callback at AR6K exit */ - struct hif_device_os_device_info osDevInfo; - struct wireless_dev *wdev; - struct cfg80211_scan_request *scan_request; - struct ar_key keys[WMI_MAX_KEY_INDEX + 1]; - u32 smeState; - u16 arWlanPowerState; - bool arWlanOff; -#ifdef CONFIG_PM - u16 arWowState; - bool arBTOff; - bool arBTSharing; - u16 arSuspendConfig; - u16 arWlanOffConfig; - u16 arWow2Config; -#endif - u8 scan_triggered; - WMI_SCAN_PARAMS_CMD scParams; -#define AR_MCAST_FILTER_MAC_ADDR_SIZE 4 - u8 mcast_filters[MAC_MAX_FILTERS_PER_LIST][AR_MCAST_FILTER_MAC_ADDR_SIZE]; - u8 bdaddr[6]; - bool scanSpecificSsid; -#ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT - void *arApDev; -#endif - u8 arAutoAuthStage; - - u8 *fw_otp; - size_t fw_otp_len; - u8 *fw; - size_t fw_len; - u8 *fw_patch; - size_t fw_patch_len; - u8 *fw_data; - size_t fw_data_len; -}; - -#ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT -struct ar_virtual_interface { - struct net_device *arNetDev; /* net_device pointer */ - struct ar6_softc *arDev; /* ar device pointer */ - struct net_device *arStaNetDev; /* net_device pointer */ -}; -#endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - -static inline void *ar6k_priv(struct net_device *dev) -{ - return (wdev_priv(dev->ieee80211_ptr)); -} - -#define SET_HCI_BUS_TYPE(pHciDev, __bus, __type) do { \ - (pHciDev)->bus = (__bus); \ - (pHciDev)->dev_type = (__type); \ -} while(0) - -#define GET_INODE_FROM_FILEP(filp) \ - (filp)->f_path.dentry->d_inode - -#define arAc2EndpointID(ar,ac) (ar)->arAc2EpMapping[(ac)] -#define arSetAc2EndpointIDMap(ar,ac,ep) \ -{ (ar)->arAc2EpMapping[(ac)] = (ep); \ - (ar)->arEp2AcMapping[(ep)] = (ac); } -#define arEndpoint2Ac(ar,ep) (ar)->arEp2AcMapping[(ep)] - -#define arRawIfEnabled(ar) (ar)->arRawIfInit -#define arRawStream2EndpointID(ar,raw) (ar)->arRawHtc->arRaw2EpMapping[(raw)] -#define arSetRawStream2EndpointIDMap(ar,raw,ep) \ -{ (ar)->arRawHtc->arRaw2EpMapping[(raw)] = (ep); \ - (ar)->arRawHtc->arEp2RawMapping[(ep)] = (raw); } -#define arEndpoint2RawStreamID(ar,ep) (ar)->arRawHtc->arEp2RawMapping[(ep)] - -struct ar_giwscan_param { - char *current_ev; - char *end_buf; - u32 bytes_needed; - struct iw_request_info *info; -}; - -#define AR6000_STAT_INC(ar, stat) (ar->arNetStats.stat++) - -#define AR6000_SPIN_LOCK(lock, param) do { \ - if (irqs_disabled()) { \ - AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("IRQs disabled:AR6000_LOCK\n")); \ - } \ - spin_lock_bh(lock); \ -} while (0) - -#define AR6000_SPIN_UNLOCK(lock, param) do { \ - if (irqs_disabled()) { \ - AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("IRQs disabled: AR6000_UNLOCK\n")); \ - } \ - spin_unlock_bh(lock); \ -} while (0) - -void ar6000_init_profile_info(struct ar6_softc *ar); -void ar6000_install_static_wep_keys(struct ar6_softc *ar); -int ar6000_init(struct net_device *dev); -int ar6000_dbglog_get_debug_logs(struct ar6_softc *ar); -void ar6000_TxDataCleanup(struct ar6_softc *ar); -int ar6000_acl_data_tx(struct sk_buff *skb, struct net_device *dev); -void ar6000_restart_endpoint(struct net_device *dev); -void ar6000_stop_endpoint(struct net_device *dev, bool keepprofile, bool getdbglogs); - -#ifdef HTC_RAW_INTERFACE - -#ifndef __user -#define __user -#endif - -int ar6000_htc_raw_open(struct ar6_softc *ar); -int ar6000_htc_raw_close(struct ar6_softc *ar); -ssize_t ar6000_htc_raw_read(struct ar6_softc *ar, - HTC_RAW_STREAM_ID StreamID, - char __user *buffer, size_t count); -ssize_t ar6000_htc_raw_write(struct ar6_softc *ar, - HTC_RAW_STREAM_ID StreamID, - char __user *buffer, size_t count); - -#endif /* HTC_RAW_INTERFACE */ - -/* AP mode */ -/*TODO: These routines should be moved to a file that is common across OS */ -sta_t * -ieee80211_find_conn(struct ar6_softc *ar, u8 *node_addr); - -sta_t * -ieee80211_find_conn_for_aid(struct ar6_softc *ar, u8 aid); - -u8 remove_sta(struct ar6_softc *ar, u8 *mac, u16 reason); - -/* HCI support */ - -#ifndef EXPORT_HCI_BRIDGE_INTERFACE -int ar6000_setup_hci(struct ar6_softc *ar); -void ar6000_cleanup_hci(struct ar6_softc *ar); -void ar6000_set_default_ar3kconfig(struct ar6_softc *ar, void *ar3kconfig); - -/* HCI bridge testing */ -int hci_test_send(struct ar6_softc *ar, struct sk_buff *skb); -#endif - -ATH_DEBUG_DECLARE_EXTERN(htc); -ATH_DEBUG_DECLARE_EXTERN(wmi); -ATH_DEBUG_DECLARE_EXTERN(bmi); -ATH_DEBUG_DECLARE_EXTERN(hif); -ATH_DEBUG_DECLARE_EXTERN(wlan); -ATH_DEBUG_DECLARE_EXTERN(misc); - -extern u8 bcast_mac[]; -extern u8 null_mac[]; - -#ifdef __cplusplus -} -#endif - -#endif /* _AR6000_H_ */ diff --git a/drivers/staging/ath6kl/os/linux/include/ar6k_pal.h b/drivers/staging/ath6kl/os/linux/include/ar6k_pal.h deleted file mode 100644 index 39e0873aff2..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/ar6k_pal.h +++ /dev/null @@ -1,36 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2009-2010 Atheros Corporation. All rights reserved. -// -// The software source and binaries included in this development package are -// licensed, not sold. You, or your company, received the package under one -// or more license agreements. The rights granted to you are specifically -// listed in these license agreement(s). All other rights remain with Atheros -// Communications, Inc., its subsidiaries, or the respective owner including -// those listed on the included copyright notices. Distribution of any -// portion of this package must be in strict compliance with the license -// agreement(s) terms. -// </copyright> -// -// <summary> -// PAL driver for AR6003 -// </summary> -// -//------------------------------------------------------------------------------ -//============================================================================== -// Author(s): ="Atheros" -//============================================================================== -#ifndef _AR6K_PAL_H_ -#define _AR6K_PAL_H_ -#define HCI_GET_OP_CODE(p) (((u16)((p)[1])) << 8) | ((u16)((p)[0])) - -/* transmit packet reserve offset */ -#define TX_PACKET_RSV_OFFSET 32 -/* pal specific config structure */ -typedef bool (*ar6k_pal_recv_pkt_t)(void *pHciPalInfo, void *skb); -typedef struct ar6k_pal_config_s -{ - ar6k_pal_recv_pkt_t fpar6k_pal_recv_pkt; -}ar6k_pal_config_t; - -void register_pal_cb(ar6k_pal_config_t *palConfig_p); -#endif /* _AR6K_PAL_H_ */ diff --git a/drivers/staging/ath6kl/os/linux/include/ar6xapi_linux.h b/drivers/staging/ath6kl/os/linux/include/ar6xapi_linux.h deleted file mode 100644 index 184dbdb5049..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/ar6xapi_linux.h +++ /dev/null @@ -1,190 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#ifndef _AR6XAPI_LINUX_H -#define _AR6XAPI_LINUX_H -#ifdef __cplusplus -extern "C" { -#endif - -struct ar6_softc; - -void ar6000_ready_event(void *devt, u8 *datap, u8 phyCap, - u32 sw_ver, u32 abi_ver); -int ar6000_control_tx(void *devt, void *osbuf, HTC_ENDPOINT_ID eid); -void ar6000_connect_event(struct ar6_softc *ar, u16 channel, - u8 *bssid, u16 listenInterval, - u16 beaconInterval, NETWORK_TYPE networkType, - u8 beaconIeLen, u8 assocReqLen, - u8 assocRespLen,u8 *assocInfo); -void ar6000_disconnect_event(struct ar6_softc *ar, u8 reason, - u8 *bssid, u8 assocRespLen, - u8 *assocInfo, u16 protocolReasonStatus); -void ar6000_tkip_micerr_event(struct ar6_softc *ar, u8 keyid, - bool ismcast); -void ar6000_bitrate_rx(void *devt, s32 rateKbps); -void ar6000_channelList_rx(void *devt, s8 numChan, u16 *chanList); -void ar6000_regDomain_event(struct ar6_softc *ar, u32 regCode); -void ar6000_txPwr_rx(void *devt, u8 txPwr); -void ar6000_keepalive_rx(void *devt, u8 configured); -void ar6000_neighborReport_event(struct ar6_softc *ar, int numAps, - WMI_NEIGHBOR_INFO *info); -void ar6000_set_numdataendpts(struct ar6_softc *ar, u32 num); -void ar6000_scanComplete_event(struct ar6_softc *ar, int status); -void ar6000_targetStats_event(struct ar6_softc *ar, u8 *ptr, u32 len); -void ar6000_rssiThreshold_event(struct ar6_softc *ar, - WMI_RSSI_THRESHOLD_VAL newThreshold, - s16 rssi); -void ar6000_reportError_event(struct ar6_softc *, WMI_TARGET_ERROR_VAL errorVal); -void ar6000_cac_event(struct ar6_softc *ar, u8 ac, u8 cac_indication, - u8 statusCode, u8 *tspecSuggestion); -void ar6000_channel_change_event(struct ar6_softc *ar, u16 oldChannel, u16 newChannel); -void ar6000_hbChallengeResp_event(struct ar6_softc *, u32 cookie, u32 source); -void -ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl); - -void -ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p); - -void -ar6000_wow_list_event(struct ar6_softc *ar, u8 num_filters, - WMI_GET_WOW_LIST_REPLY *wow_reply); - -void ar6000_pmkid_list_event(void *devt, u8 numPMKID, - WMI_PMKID *pmkidList, u8 *bssidList); - -void ar6000_gpio_intr_rx(u32 intr_mask, u32 input_values); -void ar6000_gpio_data_rx(u32 reg_id, u32 value); -void ar6000_gpio_ack_rx(void); - -s32 rssi_compensation_calc_tcmd(u32 freq, s32 rssi, u32 totalPkt); -s16 rssi_compensation_calc(struct ar6_softc *ar, s16 rssi); -s16 rssi_compensation_reverse_calc(struct ar6_softc *ar, s16 rssi, bool Above); - -void ar6000_dbglog_init_done(struct ar6_softc *ar); - -#ifdef CONFIG_HOST_TCMD_SUPPORT -void ar6000_tcmd_rx_report_event(void *devt, u8 *results, int len); -#endif - -void ar6000_tx_retry_err_event(void *devt); - -void ar6000_snrThresholdEvent_rx(void *devt, - WMI_SNR_THRESHOLD_VAL newThreshold, - u8 snr); - -void ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL range, u8 lqVal); - - -void ar6000_ratemask_rx(void *devt, u32 ratemask); - -int ar6000_get_driver_cfg(struct net_device *dev, - u16 cfgParam, - void *result); -void ar6000_bssInfo_event_rx(struct ar6_softc *ar, u8 *data, int len); - -void ar6000_dbglog_event(struct ar6_softc *ar, u32 dropped, - s8 *buffer, u32 length); - -int ar6000_dbglog_get_debug_logs(struct ar6_softc *ar); - -void ar6000_peer_event(void *devt, u8 eventCode, u8 *bssid); - -void ar6000_indicate_tx_activity(void *devt, u8 trafficClass, bool Active); -HTC_ENDPOINT_ID ar6000_ac2_endpoint_id ( void * devt, u8 ac); -u8 ar6000_endpoint_id2_ac (void * devt, HTC_ENDPOINT_ID ep ); - -void ar6000_btcoex_config_event(struct ar6_softc *ar, u8 *ptr, u32 len); - -void ar6000_btcoex_stats_event(struct ar6_softc *ar, u8 *ptr, u32 len) ; - -void ar6000_dset_open_req(void *devt, - u32 id, - u32 targ_handle, - u32 targ_reply_fn, - u32 targ_reply_arg); -void ar6000_dset_close(void *devt, u32 access_cookie); -void ar6000_dset_data_req(void *devt, - u32 access_cookie, - u32 offset, - u32 length, - u32 targ_buf, - u32 targ_reply_fn, - u32 targ_reply_arg); - - -#if defined(CONFIG_TARGET_PROFILE_SUPPORT) -void prof_count_rx(unsigned int addr, unsigned int count); -#endif - -u32 ar6000_getnodeAge (void); - -u32 ar6000_getclkfreq (void); - -int ar6000_ap_mode_profile_commit(struct ar6_softc *ar); - -struct ieee80211req_wpaie; -int -ar6000_ap_mode_get_wpa_ie(struct ar6_softc *ar, struct ieee80211req_wpaie *wpaie); - -int is_iwioctl_allowed(u8 mode, u16 cmd); - -int is_xioctl_allowed(u8 mode, int cmd); - -void ar6000_pspoll_event(struct ar6_softc *ar,u8 aid); - -void ar6000_dtimexpiry_event(struct ar6_softc *ar); - -void ar6000_aggr_rcv_addba_req_evt(struct ar6_softc *ar, WMI_ADDBA_REQ_EVENT *cmd); -void ar6000_aggr_rcv_addba_resp_evt(struct ar6_softc *ar, WMI_ADDBA_RESP_EVENT *cmd); -void ar6000_aggr_rcv_delba_req_evt(struct ar6_softc *ar, WMI_DELBA_EVENT *cmd); -void ar6000_hci_event_rcv_evt(struct ar6_softc *ar, WMI_HCI_EVENT *cmd); - -#ifdef WAPI_ENABLE -int ap_set_wapi_key(struct ar6_softc *ar, void *ik); -void ap_wapi_rekey_event(struct ar6_softc *ar, u8 type, u8 *mac); -#endif - -int ar6000_connect_to_ap(struct ar6_softc *ar); -int ar6000_disconnect(struct ar6_softc *ar); -int ar6000_update_wlan_pwr_state(struct ar6_softc *ar, AR6000_WLAN_STATE state, bool suspending); -int ar6000_set_wlan_state(struct ar6_softc *ar, AR6000_WLAN_STATE state); -int ar6000_set_bt_hw_state(struct ar6_softc *ar, u32 state); - -#ifdef CONFIG_PM -int ar6000_suspend_ev(void *context); -int ar6000_resume_ev(void *context); -int ar6000_power_change_ev(void *context, u32 config); -void ar6000_check_wow_status(struct ar6_softc *ar, struct sk_buff *skb, bool isEvent); -#endif - -#ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT -int ar6000_add_ap_interface(struct ar6_softc *ar, char *ifname); -int ar6000_remove_ap_interface(struct ar6_softc *ar); -#endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/drivers/staging/ath6kl/os/linux/include/athdrv_linux.h b/drivers/staging/ath6kl/os/linux/include/athdrv_linux.h deleted file mode 100644 index 3d5f01da543..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/athdrv_linux.h +++ /dev/null @@ -1,1217 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#ifndef _ATHDRV_LINUX_H -#define _ATHDRV_LINUX_H - -#ifdef __cplusplus -extern "C" { -#endif - - -/* - * There are two types of ioctl's here: Standard ioctls and - * eXtended ioctls. All extended ioctls (XIOCTL) are multiplexed - * off of the single ioctl command, AR6000_IOCTL_EXTENDED. The - * arguments for every XIOCTL starts with a 32-bit command word - * that is used to select which extended ioctl is in use. After - * the command word are command-specific arguments. - */ - -/* Linux standard Wireless Extensions, private ioctl interfaces */ -#define IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0) -#define IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+1) -#define IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+2) -#define IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+3) -#define IEEE80211_IOCTL_ADDPMKID (SIOCIWFIRSTPRIV+4) -#define IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+5) -//#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+6) -//#define IEEE80211_IOCTL_SETWMMPARAMS (SIOCIWFIRSTPRIV+7) -//#define IEEE80211_IOCTL_GETWMMPARAMS (SIOCIWFIRSTPRIV+8) -//#define IEEE80211_IOCTL_GETOPTIE (SIOCIWFIRSTPRIV+9) -//#define IEEE80211_IOCTL_SETAUTHALG (SIOCIWFIRSTPRIV+10) -#define IEEE80211_IOCTL_LASTONE (SIOCIWFIRSTPRIV+10) - - - -/* ====WMI Ioctls==== */ -/* - * - * Many ioctls simply provide WMI services to application code: - * an application makes such an ioctl call with a set of arguments - * that are packaged into the corresponding WMI message, and sent - * to the Target. - */ - -#define AR6000_IOCTL_WMI_GETREV (SIOCIWFIRSTPRIV+11) -/* - * arguments: - * ar6000_version *revision - */ - -#define AR6000_IOCTL_WMI_SETPWR (SIOCIWFIRSTPRIV+12) -/* - * arguments: - * WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h) - * uses: WMI_SET_POWER_MODE_CMDID - */ - -#define AR6000_IOCTL_WMI_SETSCAN (SIOCIWFIRSTPRIV+13) -/* - * arguments: - * WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h) - * uses: WMI_SET_SCAN_PARAMS_CMDID - */ - -#define AR6000_IOCTL_WMI_SETLISTENINT (SIOCIWFIRSTPRIV+14) -/* - * arguments: - * UINT32 listenInterval - * uses: WMI_SET_LISTEN_INT_CMDID - */ - -#define AR6000_IOCTL_WMI_SETBSSFILTER (SIOCIWFIRSTPRIV+15) -/* - * arguments: - * WMI_BSS_FILTER filter (see include/wmi.h) - * uses: WMI_SET_BSS_FILTER_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS (SIOCIWFIRSTPRIV+16) -/* - * arguments: - * WMI_CHANNEL_PARAMS_CMD chParams - * uses: WMI_SET_CHANNEL_PARAMS_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_PROBEDSSID (SIOCIWFIRSTPRIV+17) -/* - * arguments: - * WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h) - * uses: WMI_SETPROBED_SSID_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_PMPARAMS (SIOCIWFIRSTPRIV+18) -/* - * arguments: - * WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h) - * uses: WMI_SET_POWER_PARAMS_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_BADAP (SIOCIWFIRSTPRIV+19) -/* - * arguments: - * WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h) - * uses: WMI_ADD_BAD_AP_CMDID - */ - -#define AR6000_IOCTL_WMI_GET_QOS_QUEUE (SIOCIWFIRSTPRIV+20) -/* - * arguments: - * ar6000_queuereq queueRequest (see below) - */ - -#define AR6000_IOCTL_WMI_CREATE_QOS (SIOCIWFIRSTPRIV+21) -/* - * arguments: - * WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h) - * uses: WMI_CREATE_PSTREAM_CMDID - */ - -#define AR6000_IOCTL_WMI_DELETE_QOS (SIOCIWFIRSTPRIV+22) -/* - * arguments: - * WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h) - * uses: WMI_DELETE_PSTREAM_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD (SIOCIWFIRSTPRIV+23) -/* - * arguments: - * WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) - * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24) -/* - * arguments: - * WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h) - * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID - */ - -#define AR6000_IOCTL_WMI_GET_TARGET_STATS (SIOCIWFIRSTPRIV+25) -/* - * arguments: - * TARGET_STATS *targetStats (see below) - * uses: WMI_GET_STATISTICS_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_ASSOC_INFO (SIOCIWFIRSTPRIV+26) -/* - * arguments: - * WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd - * uses: WMI_SET_ASSOC_INFO_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS (SIOCIWFIRSTPRIV+27) -/* - * arguments: - * WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h) - * uses: WMI_SET_ACCESS_PARAMS_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_BMISS_TIME (SIOCIWFIRSTPRIV+28) -/* - * arguments: - * UINT32 beaconMissTime - * uses: WMI_SET_BMISS_TIME_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT (SIOCIWFIRSTPRIV+29) -/* - * arguments: - * WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h) - * uses: WMI_SET_DISC_TIMEOUT_CMDID - */ - -#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS (SIOCIWFIRSTPRIV+30) -/* - * arguments: - * WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd - * uses: WMI_SET_IBSS_PM_CAPS_CMDID - */ - -/* - * There is a very small space available for driver-private - * wireless ioctls. In order to circumvent this limitation, - * we multiplex a bunch of ioctls (XIOCTLs) on top of a - * single AR6000_IOCTL_EXTENDED ioctl. - */ -#define AR6000_IOCTL_EXTENDED (SIOCIWFIRSTPRIV+31) - - -/* ====BMI Extended Ioctls==== */ - -#define AR6000_XIOCTL_BMI_DONE 1 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_BMI_DONE) - * uses: BMI_DONE - */ - -#define AR6000_XIOCTL_BMI_READ_MEMORY 2 -/* - * arguments: - * union { - * struct { - * UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY) - * UINT32 address - * UINT32 length - * } - * char results[length] - * } - * uses: BMI_READ_MEMORY - */ - -#define AR6000_XIOCTL_BMI_WRITE_MEMORY 3 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY) - * UINT32 address - * UINT32 length - * char data[length] - * uses: BMI_WRITE_MEMORY - */ - -#define AR6000_XIOCTL_BMI_EXECUTE 4 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE) - * UINT32 TargetAddress - * UINT32 parameter - * uses: BMI_EXECUTE - */ - -#define AR6000_XIOCTL_BMI_SET_APP_START 5 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START) - * UINT32 TargetAddress - * uses: BMI_SET_APP_START - */ - -#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER 6 -/* - * arguments: - * union { - * struct { - * UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER) - * UINT32 TargetAddress, 32-bit aligned - * } - * UINT32 result - * } - * uses: BMI_READ_SOC_REGISTER - */ - -#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER 7 -/* - * arguments: - * struct { - * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER) - * UINT32 TargetAddress, 32-bit aligned - * UINT32 newValue - * } - * uses: BMI_WRITE_SOC_REGISTER - */ - -#define AR6000_XIOCTL_BMI_TEST 8 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_BMI_TEST) - * UINT32 address - * UINT32 length - * UINT32 count - */ - - - -/* Historical Host-side DataSet support */ -#define AR6000_XIOCTL_UNUSED9 9 -#define AR6000_XIOCTL_UNUSED10 10 -#define AR6000_XIOCTL_UNUSED11 11 - -/* ====Misc Extended Ioctls==== */ - -#define AR6000_XIOCTL_FORCE_TARGET_RESET 12 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET) - */ - - -#ifdef HTC_RAW_INTERFACE -/* HTC Raw Interface Ioctls */ -#define AR6000_XIOCTL_HTC_RAW_OPEN 13 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN) - */ - -#define AR6000_XIOCTL_HTC_RAW_CLOSE 14 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE) - */ - -#define AR6000_XIOCTL_HTC_RAW_READ 15 -/* - * arguments: - * union { - * struct { - * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ) - * UINT32 mailboxID - * UINT32 length - * } - * results[length] - * } - */ - -#define AR6000_XIOCTL_HTC_RAW_WRITE 16 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE) - * UINT32 mailboxID - * UINT32 length - * char buffer[length] - */ -#endif /* HTC_RAW_INTERFACE */ - -#define AR6000_XIOCTL_CHECK_TARGET_READY 17 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY) - */ - - - -/* ====GPIO (General Purpose I/O) Extended Ioctls==== */ - -#define AR6000_XIOCTL_GPIO_OUTPUT_SET 18 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET) - * ar6000_gpio_output_set_cmd_s (see below) - * uses: WMIX_GPIO_OUTPUT_SET_CMDID - */ - -#define AR6000_XIOCTL_GPIO_INPUT_GET 19 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET) - * uses: WMIX_GPIO_INPUT_GET_CMDID - */ - -#define AR6000_XIOCTL_GPIO_REGISTER_SET 20 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET) - * ar6000_gpio_register_cmd_s (see below) - * uses: WMIX_GPIO_REGISTER_SET_CMDID - */ - -#define AR6000_XIOCTL_GPIO_REGISTER_GET 21 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET) - * ar6000_gpio_register_cmd_s (see below) - * uses: WMIX_GPIO_REGISTER_GET_CMDID - */ - -#define AR6000_XIOCTL_GPIO_INTR_ACK 22 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK) - * ar6000_cpio_intr_ack_cmd_s (see below) - * uses: WMIX_GPIO_INTR_ACK_CMDID - */ - -#define AR6000_XIOCTL_GPIO_INTR_WAIT 23 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT) - */ - - - -/* ====more wireless commands==== */ - -#define AR6000_XIOCTL_SET_ADHOC_BSSID 24 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID) - * WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h) - */ - -#define AR6000_XIOCTL_SET_OPT_MODE 25 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE) - * WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h) - * uses: WMI_SET_OPT_MODE_CMDID - */ - -#define AR6000_XIOCTL_OPT_SEND_FRAME 26 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME) - * WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h) - * uses: WMI_OPT_TX_FRAME_CMDID - */ - -#define AR6000_XIOCTL_SET_BEACON_INTVAL 27 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_SET_BEACON_INTVAL) - * WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h) - * uses: WMI_SET_BEACON_INT_CMDID - */ - - -#define IEEE80211_IOCTL_SETAUTHALG 28 - - -#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE 29 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE) - * WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h) - * uses: WMI_SET_VOICE_PKT_SIZE_CMDID - */ - - -#define AR6000_XIOCTL_SET_MAX_SP 30 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP) - * WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h) - * uses: WMI_SET_MAX_SP_LEN_CMDID - */ - -#define AR6000_XIOCTL_WMI_GET_ROAM_TBL 31 - -#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL 32 - -#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS 33 - - -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS) - * WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h) - * WMI_SET_POWERSAVE_TIMERS_CMDID - */ - -#define AR6000_XIOCTRL_WMI_GET_POWER_MODE 34 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE) - */ - -#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE 35 -typedef enum { - WLAN_DISABLED, - WLAN_ENABLED -} AR6000_WLAN_STATE; -/* - * arguments: - * enable/disable - */ - -#define AR6000_XIOCTL_WMI_GET_ROAM_DATA 36 - -#define AR6000_XIOCTL_WMI_SETRETRYLIMITS 37 -/* - * arguments: - * WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd - * uses: WMI_SET_RETRY_LIMITS_CMDID - */ - -#ifdef CONFIG_HOST_TCMD_SUPPORT -/* ====extended commands for radio test ==== */ - -#define AR6000_XIOCTL_TCMD_CONT_TX 38 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX) - * WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h) - * uses: WMI_TCMD_CONT_TX_CMDID - */ - -#define AR6000_XIOCTL_TCMD_CONT_RX 39 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX) - * WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h) - * uses: WMI_TCMD_CONT_RX_CMDID - */ - -#define AR6000_XIOCTL_TCMD_PM 40 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_TCMD_PM) - * WMI_TCMD_PM_CMD pmCmd (see include/wmi.h) - * uses: WMI_TCMD_PM_CMDID - */ - -#endif /* CONFIG_HOST_TCMD_SUPPORT */ - -#define AR6000_XIOCTL_WMI_STARTSCAN 41 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN) - * UINT8 scanType - * UINT8 scanConnected - * u32 forceFgScan - * uses: WMI_START_SCAN_CMDID - */ - -#define AR6000_XIOCTL_WMI_SETFIXRATES 42 - -#define AR6000_XIOCTL_WMI_GETFIXRATES 43 - - -#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD 44 -/* - * arguments: - * WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) - * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID - */ - -#define AR6000_XIOCTL_WMI_CLR_RSSISNR 45 -/* - * arguments: - * WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h) - * uses: WMI_CLR_RSSISNR_CMDID - */ - -#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD 46 -/* - * arguments: - * WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) - * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID - */ - -#define AR6000_XIOCTL_WMI_SET_RTS 47 -/* - * arguments: - * WMI_SET_RTS_MODE_CMD (see include/wmi.h) - * uses: WMI_SET_RTS_MODE_CMDID - */ - -#define AR6000_XIOCTL_WMI_SET_LPREAMBLE 48 - -#define AR6000_XIOCTL_WMI_SET_AUTHMODE 49 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE) - * UINT8 mode - * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID - */ - -#define AR6000_XIOCTL_WMI_SET_REASSOCMODE 50 - -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM) - * UINT8 mode - * uses: WMI_SET_WMM_CMDID - */ -#define AR6000_XIOCTL_WMI_SET_WMM 51 - -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS) - * UINT32 frequency - * UINT8 threshold - */ -#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS 52 - -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP) - * UINT32 cookie - */ -#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP 53 - -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD) - * UINT32 regDomain - */ -#define AR6000_XIOCTL_WMI_GET_RD 54 - -#define AR6000_XIOCTL_DIAG_READ 55 - -#define AR6000_XIOCTL_DIAG_WRITE 56 - -/* - * arguments cmd (AR6000_XIOCTL_SET_TXOP) - * WMI_TXOP_CFG txopEnable - */ -#define AR6000_XIOCTL_WMI_SET_TXOP 57 - -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS) - * UINT32 keyOpCtrl - * uses struct ar6000_user_setkeys_info - */ -#define AR6000_XIOCTL_USER_SETKEYS 58 - -#define AR6000_XIOCTL_WMI_SET_KEEPALIVE 59 -/* - * arguments: - * UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE) - * UINT8 keepaliveInterval - * uses: WMI_SET_KEEPALIVE_CMDID - */ - -#define AR6000_XIOCTL_WMI_GET_KEEPALIVE 60 -/* - * arguments: - * UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE) - * UINT8 keepaliveInterval - * u32 configured - * uses: WMI_GET_KEEPALIVE_CMDID - */ - -/* ====ROM Patching Extended Ioctls==== */ - -#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL 61 -/* - * arguments: - * union { - * struct { - * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL) - * UINT32 ROM Address - * UINT32 RAM Address - * UINT32 number of bytes - * UINT32 activate? (0 or 1) - * } - * u32 resulting rompatch ID - * } - * uses: BMI_ROMPATCH_INSTALL - */ - -#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL 62 -/* - * arguments: - * struct { - * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL) - * UINT32 rompatch ID - * } - * uses: BMI_ROMPATCH_UNINSTALL - */ - -#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE 63 -/* - * arguments: - * struct { - * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) - * UINT32 rompatch count - * UINT32 rompatch IDs[rompatch count] - * } - * uses: BMI_ROMPATCH_ACTIVATE - */ - -#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE 64 -/* - * arguments: - * struct { - * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE) - * UINT32 rompatch count - * UINT32 rompatch IDs[rompatch count] - * } - * uses: BMI_ROMPATCH_DEACTIVATE - */ - -#define AR6000_XIOCTL_WMI_SET_APPIE 65 -/* - * arguments: - * struct { - * UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE) - * UINT32 app_frmtype; - * UINT32 app_buflen; - * UINT8 app_buf[]; - * } - */ -#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER 66 -/* - * arguments: - * u32 filter_type; - */ - -#define AR6000_XIOCTL_DBGLOG_CFG_MODULE 67 - -#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS 68 - -#define AR6000_XIOCTL_WMI_SET_WSC_STATUS 70 -/* - * arguments: - * u32 wsc_status; - * (WSC_REG_INACTIVE or WSC_REG_ACTIVE) - */ - -/* - * arguments: - * struct { - * u8 streamType; - * u8 status; - * } - * uses: WMI_SET_BT_STATUS_CMDID - */ -#define AR6000_XIOCTL_WMI_SET_BT_STATUS 71 - -/* - * arguments: - * struct { - * u8 paramType; - * union { - * u8 noSCOPkts; - * BT_PARAMS_A2DP a2dpParams; - * BT_COEX_REGS regs; - * }; - * } - * uses: WMI_SET_BT_PARAM_CMDID - */ -#define AR6000_XIOCTL_WMI_SET_BT_PARAMS 72 - -#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE 73 -#define AR6000_XIOCTL_WMI_SET_WOW_MODE 74 -#define AR6000_XIOCTL_WMI_GET_WOW_LIST 75 -#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN 76 -#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN 77 - - - -#define AR6000_XIOCTL_TARGET_INFO 78 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_TARGET_INFO) - * u32 TargetVersion (returned) - * u32 TargetType (returned) - * (See also bmi_msg.h target_ver and target_type) - */ - -#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE 79 -/* - * arguments: - * none - */ - -#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE 80 -/* - * This ioctl is used to emulate traffic activity - * timeouts. Activity/inactivity will trigger the driver - * to re-balance credits. - * - * arguments: - * ar6000_traffic_activity_change - */ - -#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS 81 -/* - * This ioctl is used to set the connect control flags - * - * arguments: - * u32 connectCtrlFlags - */ - -#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS 82 -/* - * This IOCTL sets any Authentication,Key Management and Protection - * related parameters. This is used along with the information set in - * Connect Command. - * Currently this enables Multiple PMKIDs to an AP. - * - * arguments: - * struct { - * u32 akmpInfo; - * } - * uses: WMI_SET_AKMP_PARAMS_CMD - */ - -#define AR6000_XIOCTL_WMI_GET_PMKID_LIST 83 - -#define AR6000_XIOCTL_WMI_SET_PMKID_LIST 84 -/* - * This IOCTL is used to set a list of PMKIDs. This list of - * PMKIDs is used in the [Re]AssocReq Frame. This list is used - * only if the MultiPMKID option is enabled via the - * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS IOCTL. - * - * arguments: - * struct { - * u32 numPMKID; - * WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE]; - * } - * uses: WMI_SET_PMKIDLIST_CMD - */ - -#define AR6000_XIOCTL_WMI_SET_PARAMS 85 -#define AR6000_XIOCTL_WMI_SET_MCAST_FILTER 86 -#define AR6000_XIOCTL_WMI_DEL_MCAST_FILTER 87 - - -/* Historical DSETPATCH support for INI patches */ -#define AR6000_XIOCTL_UNUSED90 90 - - -/* Support LZ-compressed firmware download */ -#define AR6000_XIOCTL_BMI_LZ_STREAM_START 91 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_BMI_LZ_STREAM_START) - * UINT32 address - * uses: BMI_LZ_STREAM_START - */ - -#define AR6000_XIOCTL_BMI_LZ_DATA 92 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_BMI_LZ_DATA) - * UINT32 length - * char data[length] - * uses: BMI_LZ_DATA - */ - -#define AR6000_XIOCTL_PROF_CFG 93 -/* - * arguments: - * u32 period - * u32 nbins - */ - -#define AR6000_XIOCTL_PROF_ADDR_SET 94 -/* - * arguments: - * u32 Target address - */ - -#define AR6000_XIOCTL_PROF_START 95 - -#define AR6000_XIOCTL_PROF_STOP 96 - -#define AR6000_XIOCTL_PROF_COUNT_GET 97 - -#define AR6000_XIOCTL_WMI_ABORT_SCAN 98 - -/* - * AP mode - */ -#define AR6000_XIOCTL_AP_GET_STA_LIST 99 - -#define AR6000_XIOCTL_AP_HIDDEN_SSID 100 - -#define AR6000_XIOCTL_AP_SET_NUM_STA 101 - -#define AR6000_XIOCTL_AP_SET_ACL_MAC 102 - -#define AR6000_XIOCTL_AP_GET_ACL_LIST 103 - -#define AR6000_XIOCTL_AP_COMMIT_CONFIG 104 - -#define IEEE80211_IOCTL_GETWPAIE 105 - -#define AR6000_XIOCTL_AP_CONN_INACT_TIME 106 - -#define AR6000_XIOCTL_AP_PROT_SCAN_TIME 107 - -#define AR6000_XIOCTL_AP_SET_COUNTRY 108 - -#define AR6000_XIOCTL_AP_SET_DTIM 109 - - - - -#define AR6000_XIOCTL_WMI_TARGET_EVENT_REPORT 110 - -#define AR6000_XIOCTL_SET_IP 111 - -#define AR6000_XIOCTL_AP_SET_ACL_POLICY 112 - -#define AR6000_XIOCTL_AP_INTRA_BSS_COMM 113 - -#define AR6000_XIOCTL_DUMP_MODULE_DEBUG_INFO 114 - -#define AR6000_XIOCTL_MODULE_DEBUG_SET_MASK 115 - -#define AR6000_XIOCTL_MODULE_DEBUG_GET_MASK 116 - -#define AR6000_XIOCTL_DUMP_RCV_AGGR_STATS 117 - -#define AR6000_XIOCTL_SET_HT_CAP 118 - -#define AR6000_XIOCTL_SET_HT_OP 119 - -#define AR6000_XIOCTL_AP_GET_STAT 120 - -#define AR6000_XIOCTL_SET_TX_SELECT_RATES 121 - -#define AR6000_XIOCTL_SETUP_AGGR 122 - -#define AR6000_XIOCTL_ALLOW_AGGR 123 - -#define AR6000_XIOCTL_AP_GET_HIDDEN_SSID 124 - -#define AR6000_XIOCTL_AP_GET_COUNTRY 125 - -#define AR6000_XIOCTL_AP_GET_WMODE 126 - -#define AR6000_XIOCTL_AP_GET_DTIM 127 - -#define AR6000_XIOCTL_AP_GET_BINTVL 128 - -#define AR6000_XIOCTL_AP_GET_RTS 129 - -#define AR6000_XIOCTL_DELE_AGGR 130 - -#define AR6000_XIOCTL_FETCH_TARGET_REGS 131 - -#define AR6000_XIOCTL_HCI_CMD 132 - -#define AR6000_XIOCTL_ACL_DATA 133 /* used to be used for PAL */ - -#define AR6000_XIOCTL_WLAN_CONN_PRECEDENCE 134 - -#define AR6000_XIOCTL_AP_SET_11BG_RATESET 135 - -/* - * arguments: - * WMI_AP_PS_CMD apPsCmd - * uses: WMI_AP_PS_CMDID - */ - -#define AR6000_XIOCTL_WMI_SET_AP_PS 136 - -#define AR6000_XIOCTL_WMI_MCAST_FILTER 137 - -#define AR6000_XIOCTL_WMI_SET_BTCOEX_FE_ANT 138 - -#define AR6000_XIOCTL_WMI_SET_BTCOEX_COLOCATED_BT_DEV 139 - -#define AR6000_XIOCTL_WMI_SET_BTCOEX_BTINQUIRY_PAGE_CONFIG 140 - -#define AR6000_XIOCTL_WMI_SET_BTCOEX_SCO_CONFIG 141 - -#define AR6000_XIOCTL_WMI_SET_BTCOEX_A2DP_CONFIG 142 - -#define AR6000_XIOCTL_WMI_SET_BTCOEX_ACLCOEX_CONFIG 143 - -#define AR6000_XIOCTL_WMI_SET_BTCOEX_DEBUG 144 - -#define AR6000_XIOCTL_WMI_SET_BT_OPERATING_STATUS 145 - -#define AR6000_XIOCTL_WMI_GET_BTCOEX_CONFIG 146 - -#define AR6000_XIOCTL_WMI_GET_BTCOEX_STATS 147 -/* - * arguments: - * UINT32 cmd (AR6000_XIOCTL_WMI_SET_QOS_SUPP) - * UINT8 mode - * uses: WMI_SET_QOS_SUPP_CMDID - */ -#define AR6000_XIOCTL_WMI_SET_QOS_SUPP 148 - -#define AR6000_XIOCTL_GET_WLAN_SLEEP_STATE 149 - -#define AR6000_XIOCTL_SET_BT_HW_POWER_STATE 150 - -#define AR6000_XIOCTL_GET_BT_HW_POWER_STATE 151 - -#define AR6000_XIOCTL_ADD_AP_INTERFACE 152 - -#define AR6000_XIOCTL_REMOVE_AP_INTERFACE 153 - -#define AR6000_XIOCTL_WMI_SET_TX_SGI_PARAM 154 - -#define AR6000_XIOCTL_WMI_SET_EXCESS_TX_RETRY_THRES 161 - -/* used by AR6000_IOCTL_WMI_GETREV */ -struct ar6000_version { - u32 host_ver; - u32 target_ver; - u32 wlan_ver; - u32 abi_ver; -}; - -/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */ -struct ar6000_queuereq { - u8 trafficClass; - u16 activeTsids; -}; - -/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */ -typedef struct targetStats_t { - u64 tx_packets; - u64 tx_bytes; - u64 tx_unicast_pkts; - u64 tx_unicast_bytes; - u64 tx_multicast_pkts; - u64 tx_multicast_bytes; - u64 tx_broadcast_pkts; - u64 tx_broadcast_bytes; - u64 tx_rts_success_cnt; - u64 tx_packet_per_ac[4]; - - u64 tx_errors; - u64 tx_failed_cnt; - u64 tx_retry_cnt; - u64 tx_mult_retry_cnt; - u64 tx_rts_fail_cnt; - - u64 rx_packets; - u64 rx_bytes; - u64 rx_unicast_pkts; - u64 rx_unicast_bytes; - u64 rx_multicast_pkts; - u64 rx_multicast_bytes; - u64 rx_broadcast_pkts; - u64 rx_broadcast_bytes; - u64 rx_fragment_pkt; - - u64 rx_errors; - u64 rx_crcerr; - u64 rx_key_cache_miss; - u64 rx_decrypt_err; - u64 rx_duplicate_frames; - - u64 tkip_local_mic_failure; - u64 tkip_counter_measures_invoked; - u64 tkip_replays; - u64 tkip_format_errors; - u64 ccmp_format_errors; - u64 ccmp_replays; - - u64 power_save_failure_cnt; - - u64 cs_bmiss_cnt; - u64 cs_lowRssi_cnt; - u64 cs_connect_cnt; - u64 cs_disconnect_cnt; - - s32 tx_unicast_rate; - s32 rx_unicast_rate; - - u32 lq_val; - - u32 wow_num_pkts_dropped; - u16 wow_num_events_discarded; - - s16 noise_floor_calibation; - s16 cs_rssi; - s16 cs_aveBeacon_rssi; - u8 cs_aveBeacon_snr; - u8 cs_lastRoam_msec; - u8 cs_snr; - - u8 wow_num_host_pkt_wakeups; - u8 wow_num_host_event_wakeups; - - u32 arp_received; - u32 arp_matched; - u32 arp_replied; -}TARGET_STATS; - -typedef struct targetStats_cmd_t { - TARGET_STATS targetStats; - int clearStats; -} TARGET_STATS_CMD; - -/* used by AR6000_XIOCTL_USER_SETKEYS */ - -/* - * Setting this bit to 1 doesnot initialize the RSC on the firmware - */ -#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL 1 -#define AR6000_USER_SETKEYS_RSC_UNCHANGED 0x00000002 - -struct ar6000_user_setkeys_info { - u32 keyOpCtrl; /* Bit Map of Key Mgmt Ctrl Flags */ -}; /* XXX: unused !? */ - -/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */ -struct ar6000_gpio_output_set_cmd_s { - u32 set_mask; - u32 clear_mask; - u32 enable_mask; - u32 disable_mask; -}; - -/* - * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET - */ -struct ar6000_gpio_register_cmd_s { - u32 gpioreg_id; - u32 value; -}; - -/* used by AR6000_XIOCTL_GPIO_INTR_ACK */ -struct ar6000_gpio_intr_ack_cmd_s { - u32 ack_mask; -}; - -/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */ -struct ar6000_gpio_intr_wait_cmd_s { - u32 intr_mask; - u32 input_values; -}; - -/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */ -typedef struct ar6000_dbglog_module_config_s { - u32 valid; - u16 mmask; - u16 tsr; - u32 rep; - u16 size; -} DBGLOG_MODULE_CONFIG; - -typedef struct user_rssi_thold_t { - s16 tag; - s16 rssi; -} USER_RSSI_THOLD; - -typedef struct user_rssi_params_t { - u8 weight; - u32 pollTime; - USER_RSSI_THOLD tholds[12]; -} USER_RSSI_PARAMS; - -typedef struct ar6000_get_btcoex_config_cmd_t{ - u32 btProfileType; - u32 linkId; - }AR6000_GET_BTCOEX_CONFIG_CMD; - -typedef struct ar6000_btcoex_config_t { - AR6000_GET_BTCOEX_CONFIG_CMD configCmd; - u32 *configEvent; -} AR6000_BTCOEX_CONFIG; - -typedef struct ar6000_btcoex_stats_t { - u32 *statsEvent; - }AR6000_BTCOEX_STATS; -/* - * Host driver may have some config parameters. Typically, these - * config params are one time config parameters. These could - * correspond to any of the underlying modules. Host driver exposes - * an api for the underlying modules to get this config. - */ -#define AR6000_DRIVER_CFG_BASE 0x8000 - -/* Should driver perform wlan node caching? */ -#define AR6000_DRIVER_CFG_GET_WLANNODECACHING 0x8001 -/*Should we log raw WMI msgs */ -#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS 0x8002 - -/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */ -struct ar6000_diag_window_cmd_s { - unsigned int addr; - unsigned int value; -}; - - -struct ar6000_traffic_activity_change { - u32 StreamID; /* stream ID to indicate activity change */ - u32 Active; /* active (1) or inactive (0) */ -}; - -/* Used with AR6000_XIOCTL_PROF_COUNT_GET */ -struct prof_count_s { - u32 addr; /* bin start address */ - u32 count; /* hit count */ -}; - - -/* used by AR6000_XIOCTL_MODULE_DEBUG_SET_MASK */ -/* AR6000_XIOCTL_MODULE_DEBUG_GET_MASK */ -/* AR6000_XIOCTL_DUMP_MODULE_DEBUG_INFO */ -struct drv_debug_module_s { - char modulename[128]; /* name of module */ - u32 mask; /* new mask to set .. or .. current mask */ -}; - - -/* All HCI related rx events are sent up to the host app - * via a wmi event id. It can contain ACL data or HCI event, - * based on which it will be de-multiplexed. - */ -typedef enum { - PAL_HCI_EVENT = 0, - PAL_HCI_RX_DATA, -} WMI_PAL_EVENT_INFO; - - -#ifdef __cplusplus -} -#endif -#endif diff --git a/drivers/staging/ath6kl/os/linux/include/cfg80211.h b/drivers/staging/ath6kl/os/linux/include/cfg80211.h deleted file mode 100644 index d5253207b19..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/cfg80211.h +++ /dev/null @@ -1,61 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#ifndef _AR6K_CFG80211_H_ -#define _AR6K_CFG80211_H_ - -struct wireless_dev *ar6k_cfg80211_init(struct device *dev); -void ar6k_cfg80211_deinit(struct ar6_softc *ar); - -void ar6k_cfg80211_scanComplete_event(struct ar6_softc *ar, int status); - -void ar6k_cfg80211_connect_event(struct ar6_softc *ar, u16 channel, - u8 *bssid, u16 listenInterval, - u16 beaconInterval,NETWORK_TYPE networkType, - u8 beaconIeLen, u8 assocReqLen, - u8 assocRespLen, u8 *assocInfo); - -void ar6k_cfg80211_disconnect_event(struct ar6_softc *ar, u8 reason, - u8 *bssid, u8 assocRespLen, - u8 *assocInfo, u16 protocolReasonStatus); - -void ar6k_cfg80211_tkip_micerr_event(struct ar6_softc *ar, u8 keyid, bool ismcast); - -#ifdef CONFIG_NL80211_TESTMODE -void ar6000_testmode_rx_report_event(struct ar6_softc *ar, void *buf, - int buf_len); -#else -static inline void ar6000_testmode_rx_report_event(struct ar6_softc *ar, - void *buf, int buf_len) -{ -} -#endif - - -#endif /* _AR6K_CFG80211_H_ */ - - - - - - diff --git a/drivers/staging/ath6kl/os/linux/include/config_linux.h b/drivers/staging/ath6kl/os/linux/include/config_linux.h deleted file mode 100644 index dbbe1a00b92..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/config_linux.h +++ /dev/null @@ -1,51 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#ifndef _CONFIG_LINUX_H_ -#define _CONFIG_LINUX_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * Host side Test Command support - */ -#define CONFIG_HOST_TCMD_SUPPORT - -#define USE_4BYTE_REGISTER_ACCESS - -/* Host-side support for Target-side profiling */ -#undef CONFIG_TARGET_PROFILE_SUPPORT - -/* IP/TCP checksum offload */ -/* Checksum offload is currently not supported for 64 bit platforms */ -#ifndef __LP64__ -#define CONFIG_CHECKSUM_OFFLOAD -#endif /* __LP64__ */ - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/drivers/staging/ath6kl/os/linux/include/debug_linux.h b/drivers/staging/ath6kl/os/linux/include/debug_linux.h deleted file mode 100644 index b8dba52badc..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/debug_linux.h +++ /dev/null @@ -1,50 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#ifndef _DEBUG_LINUX_H_ -#define _DEBUG_LINUX_H_ - - /* macro to remove parens */ -#define ATH_PRINTX_ARG(arg...) arg - -#ifdef DEBUG - /* NOTE: the AR_DEBUG_PRINTF macro is defined here to handle special handling of variable arg macros - * which may be compiler dependent. */ -#define AR_DEBUG_PRINTF(mask, args) do { \ - if (GET_ATH_MODULE_DEBUG_VAR_MASK(ATH_MODULE_NAME) & (mask)) { \ - A_LOGGER(mask, ATH_MODULE_NAME, ATH_PRINTX_ARG args); \ - } \ -} while (0) -#else - /* on non-debug builds, keep in error and warning messages in the driver, all other - * message tracing will get compiled out */ -#define AR_DEBUG_PRINTF(mask, args) \ - if ((mask) & (ATH_DEBUG_ERR | ATH_DEBUG_WARN)) { A_PRINTF(ATH_PRINTX_ARG args); } - -#endif - - /* compile specific macro to get the function name string */ -#define _A_FUNCNAME_ __func__ - - -#endif /* _DEBUG_LINUX_H_ */ diff --git a/drivers/staging/ath6kl/os/linux/include/export_hci_transport.h b/drivers/staging/ath6kl/os/linux/include/export_hci_transport.h deleted file mode 100644 index 74f98618334..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/export_hci_transport.h +++ /dev/null @@ -1,76 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2009-2010 Atheros Corporation. All rights reserved. -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -//------------------------------------------------------------------------------ -//============================================================================== -// HCI bridge implementation -// -// Author(s): ="Atheros" -//============================================================================== - -#include "hci_transport_api.h" -#include "common_drv.h" - -extern HCI_TRANSPORT_HANDLE (*_HCI_TransportAttach)(void *HTCHandle, struct hci_transport_config_info *pInfo); -extern void (*_HCI_TransportDetach)(HCI_TRANSPORT_HANDLE HciTrans); -extern int (*_HCI_TransportAddReceivePkts)(HCI_TRANSPORT_HANDLE HciTrans, struct htc_packet_queue *pQueue); -extern int (*_HCI_TransportSendPkt)(HCI_TRANSPORT_HANDLE HciTrans, struct htc_packet *pPacket, bool Synchronous); -extern void (*_HCI_TransportStop)(HCI_TRANSPORT_HANDLE HciTrans); -extern int (*_HCI_TransportStart)(HCI_TRANSPORT_HANDLE HciTrans); -extern int (*_HCI_TransportEnableDisableAsyncRecv)(HCI_TRANSPORT_HANDLE HciTrans, bool Enable); -extern int (*_HCI_TransportRecvHCIEventSync)(HCI_TRANSPORT_HANDLE HciTrans, - struct htc_packet *pPacket, - int MaxPollMS); -extern int (*_HCI_TransportSetBaudRate)(HCI_TRANSPORT_HANDLE HciTrans, u32 Baud); -extern int (*_HCI_TransportEnablePowerMgmt)(HCI_TRANSPORT_HANDLE HciTrans, bool Enable); - - -#define HCI_TransportAttach(HTCHandle, pInfo) \ - _HCI_TransportAttach((HTCHandle), (pInfo)) -#define HCI_TransportDetach(HciTrans) \ - _HCI_TransportDetach(HciTrans) -#define HCI_TransportAddReceivePkts(HciTrans, pQueue) \ - _HCI_TransportAddReceivePkts((HciTrans), (pQueue)) -#define HCI_TransportSendPkt(HciTrans, pPacket, Synchronous) \ - _HCI_TransportSendPkt((HciTrans), (pPacket), (Synchronous)) -#define HCI_TransportStop(HciTrans) \ - _HCI_TransportStop((HciTrans)) -#define HCI_TransportStart(HciTrans) \ - _HCI_TransportStart((HciTrans)) -#define HCI_TransportEnableDisableAsyncRecv(HciTrans, Enable) \ - _HCI_TransportEnableDisableAsyncRecv((HciTrans), (Enable)) -#define HCI_TransportRecvHCIEventSync(HciTrans, pPacket, MaxPollMS) \ - _HCI_TransportRecvHCIEventSync((HciTrans), (pPacket), (MaxPollMS)) -#define HCI_TransportSetBaudRate(HciTrans, Baud) \ - _HCI_TransportSetBaudRate((HciTrans), (Baud)) -#define HCI_TransportEnablePowerMgmt(HciTrans, Enable) \ - _HCI_TransportEnablePowerMgmt((HciTrans), (Enable)) - - -extern int ar6000_register_hci_transport(struct hci_transport_callbacks *hciTransCallbacks); - -extern int ar6000_get_hif_dev(struct hif_device *device, void *config); - -extern int ar6000_set_uart_config(struct hif_device *hifDevice, u32 scale, u32 step); - -/* get core clock register settings - * data: 0 - 40/44MHz - * 1 - 80/88MHz - * where (5G band/2.4G band) - * assume 2.4G band for now - */ -extern int ar6000_get_core_clock_config(struct hif_device *hifDevice, u32 *data); diff --git a/drivers/staging/ath6kl/os/linux/include/ieee80211_ioctl.h b/drivers/staging/ath6kl/os/linux/include/ieee80211_ioctl.h deleted file mode 100644 index e6e96de3fc6..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/ieee80211_ioctl.h +++ /dev/null @@ -1,177 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#ifndef _IEEE80211_IOCTL_H_ -#define _IEEE80211_IOCTL_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * Extracted from the MADWIFI net80211/ieee80211_ioctl.h - */ - -/* - * WPA/RSN get/set key request. Specify the key/cipher - * type and whether the key is to be used for sending and/or - * receiving. The key index should be set only when working - * with global keys (use IEEE80211_KEYIX_NONE for ``no index''). - * Otherwise a unicast/pairwise key is specified by the bssid - * (on a station) or mac address (on an ap). They key length - * must include any MIC key data; otherwise it should be no - more than IEEE80211_KEYBUF_SIZE. - */ -struct ieee80211req_key { - u_int8_t ik_type; /* key/cipher type */ - u_int8_t ik_pad; - u_int16_t ik_keyix; /* key index */ - u_int8_t ik_keylen; /* key length in bytes */ - u_int8_t ik_flags; -#define IEEE80211_KEY_XMIT 0x01 -#define IEEE80211_KEY_RECV 0x02 -#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */ - u_int8_t ik_macaddr[IEEE80211_ADDR_LEN]; - u_int64_t ik_keyrsc; /* key receive sequence counter */ - u_int64_t ik_keytsc; /* key transmit sequence counter */ - u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; -}; -/* - * Delete a key either by index or address. Set the index - * to IEEE80211_KEYIX_NONE when deleting a unicast key. - */ -struct ieee80211req_del_key { - u_int8_t idk_keyix; /* key index */ - u_int8_t idk_macaddr[IEEE80211_ADDR_LEN]; -}; -/* - * MLME state manipulation request. IEEE80211_MLME_ASSOC - * only makes sense when operating as a station. The other - * requests can be used when operating as a station or an - * ap (to effect a station). - */ -struct ieee80211req_mlme { - u_int8_t im_op; /* operation to perform */ -#define IEEE80211_MLME_ASSOC 1 /* associate station */ -#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */ -#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */ -#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */ -#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */ - u_int16_t im_reason; /* 802.11 reason code */ - u_int8_t im_macaddr[IEEE80211_ADDR_LEN]; -}; - -struct ieee80211req_addpmkid { - u_int8_t pi_bssid[IEEE80211_ADDR_LEN]; - u_int8_t pi_enable; - u_int8_t pi_pmkid[16]; -}; - -#define AUTH_ALG_OPEN_SYSTEM 0x01 -#define AUTH_ALG_SHARED_KEY 0x02 -#define AUTH_ALG_LEAP 0x04 - -struct ieee80211req_authalg { - u_int8_t auth_alg; -}; - -/* - * Request to add an IE to a Management Frame - */ -enum{ - IEEE80211_APPIE_FRAME_BEACON = 0, - IEEE80211_APPIE_FRAME_PROBE_REQ = 1, - IEEE80211_APPIE_FRAME_PROBE_RESP = 2, - IEEE80211_APPIE_FRAME_ASSOC_REQ = 3, - IEEE80211_APPIE_FRAME_ASSOC_RESP = 4, - IEEE80211_APPIE_NUM_OF_FRAME = 5 -}; - -/* - * The Maximum length of the IE that can be added to a Management frame - */ -#define IEEE80211_APPIE_FRAME_MAX_LEN 200 - -struct ieee80211req_getset_appiebuf { - u_int32_t app_frmtype; /* management frame type for which buffer is added */ - u_int32_t app_buflen; /*application supplied buffer length */ - u_int8_t app_buf[]; -}; - -/* - * The following definitions are used by an application to set filter - * for receiving management frames - */ -enum { - IEEE80211_FILTER_TYPE_BEACON = 0x1, - IEEE80211_FILTER_TYPE_PROBE_REQ = 0x2, - IEEE80211_FILTER_TYPE_PROBE_RESP = 0x4, - IEEE80211_FILTER_TYPE_ASSOC_REQ = 0x8, - IEEE80211_FILTER_TYPE_ASSOC_RESP = 0x10, - IEEE80211_FILTER_TYPE_AUTH = 0x20, - IEEE80211_FILTER_TYPE_DEAUTH = 0x40, - IEEE80211_FILTER_TYPE_DISASSOC = 0x80, - IEEE80211_FILTER_TYPE_ALL = 0xFF /* used to check the valid filter bits */ -}; - -struct ieee80211req_set_filter { - u_int32_t app_filterype; /* management frame filter type */ -}; - -enum { - IEEE80211_PARAM_AUTHMODE = 3, /* Authentication Mode */ - IEEE80211_PARAM_MCASTCIPHER = 5, - IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */ - IEEE80211_PARAM_UCASTCIPHER = 8, - IEEE80211_PARAM_UCASTKEYLEN = 9, /* unicast key length */ - IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */ - IEEE80211_PARAM_ROAMING = 12, /* roaming mode */ - IEEE80211_PARAM_PRIVACY = 13, /* privacy invoked */ - IEEE80211_PARAM_COUNTERMEASURES = 14, /* WPA/TKIP countermeasures */ - IEEE80211_PARAM_DROPUNENCRYPTED = 15, /* discard unencrypted frames */ - IEEE80211_PARAM_WAPI = 16, /* WAPI policy from wapid */ -}; - -/* - * Values for IEEE80211_PARAM_WPA - */ -#define WPA_MODE_WPA1 1 -#define WPA_MODE_WPA2 2 -#define WPA_MODE_AUTO 3 -#define WPA_MODE_NONE 4 - -struct ieee80211req_wpaie { - u_int8_t wpa_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t wpa_ie[IEEE80211_MAX_IE]; - u_int8_t rsn_ie[IEEE80211_MAX_IE]; -}; - -#ifndef IW_ENCODE_ALG_PMK -#define IW_ENCODE_ALG_PMK 4 -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* _IEEE80211_IOCTL_H_ */ diff --git a/drivers/staging/ath6kl/os/linux/include/osapi_linux.h b/drivers/staging/ath6kl/os/linux/include/osapi_linux.h deleted file mode 100644 index 41f43730772..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/osapi_linux.h +++ /dev/null @@ -1,339 +0,0 @@ -//------------------------------------------------------------------------------ -// This file contains the definitions of the basic atheros data types. -// It is used to map the data types in atheros files to a platform specific -// type. -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#ifndef _OSAPI_LINUX_H_ -#define _OSAPI_LINUX_H_ - -#ifdef __KERNEL__ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/jiffies.h> -#include <linux/timer.h> -#include <linux/delay.h> -#include <linux/wait.h> -#include <linux/semaphore.h> -#include <linux/cache.h> - -#ifdef __GNUC__ -#define __ATTRIB_PACK __attribute__ ((packed)) -#define __ATTRIB_PRINTF __attribute__ ((format (printf, 1, 2))) -#define __ATTRIB_NORETURN __attribute__ ((noreturn)) -#ifndef INLINE -#define INLINE __inline__ -#endif -#else /* Not GCC */ -#define __ATTRIB_PACK -#define __ATTRIB_PRINTF -#define __ATTRIB_NORETURN -#ifndef INLINE -#define INLINE __inline -#endif -#endif /* End __GNUC__ */ - -#define PREPACK -#define POSTPACK __ATTRIB_PACK - -/* - * Endianes macros - */ -#define A_BE2CPU8(x) ntohb(x) -#define A_BE2CPU16(x) ntohs(x) -#define A_BE2CPU32(x) ntohl(x) - -#define A_LE2CPU8(x) (x) -#define A_LE2CPU16(x) (x) -#define A_LE2CPU32(x) (x) - -#define A_CPU2BE8(x) htonb(x) -#define A_CPU2BE16(x) htons(x) -#define A_CPU2BE32(x) htonl(x) - -#define A_MEMZERO(addr, len) memset(addr, 0, len) -#define A_MALLOC(size) kmalloc((size), GFP_KERNEL) -#define A_MALLOC_NOWAIT(size) kmalloc((size), GFP_ATOMIC) - -#define A_LOGGER(mask, mod, args...) printk(KERN_ALERT args) -#define A_PRINTF(args...) printk(KERN_ALERT args) - -#define A_PRINTF_LOG(args...) printk(args) -#define A_SPRINTF(buf, args...) sprintf (buf, args) - -/* Mutual Exclusion */ -typedef spinlock_t A_MUTEX_T; -#define A_MUTEX_INIT(mutex) spin_lock_init(mutex) -#define A_MUTEX_LOCK(mutex) spin_lock_bh(mutex) -#define A_MUTEX_UNLOCK(mutex) spin_unlock_bh(mutex) -#define A_IS_MUTEX_VALID(mutex) true /* okay to return true, since A_MUTEX_DELETE does nothing */ -#define A_MUTEX_DELETE(mutex) /* spin locks are not kernel resources so nothing to free.. */ - -/* Get current time in ms adding a constant offset (in ms) */ -#define A_GET_MS(offset) \ - (((jiffies / HZ) * 1000) + (offset)) - -/* - * Timer Functions - */ -#define A_MDELAY(msecs) mdelay(msecs) -typedef struct timer_list A_TIMER; - -#define A_INIT_TIMER(pTimer, pFunction, pArg) do { \ - init_timer(pTimer); \ - (pTimer)->function = (pFunction); \ - (pTimer)->data = (unsigned long)(pArg); \ -} while (0) - -/* - * Start a Timer that elapses after 'periodMSec' milli-seconds - * Support is provided for a one-shot timer. The 'repeatFlag' is - * ignored. - */ -#define A_TIMEOUT_MS(pTimer, periodMSec, repeatFlag) do { \ - if (repeatFlag) { \ - printk("\n" __FILE__ ":%d: Timer Repeat requested\n",__LINE__); \ - panic("Timer Repeat"); \ - } \ - mod_timer((pTimer), jiffies + HZ * (periodMSec) / 1000); \ -} while (0) - -/* - * Cancel the Timer. - */ -#define A_UNTIMEOUT(pTimer) do { \ - del_timer((pTimer)); \ -} while (0) - -#define A_DELETE_TIMER(pTimer) do { \ -} while (0) - -/* - * Wait Queue related functions - */ -typedef wait_queue_head_t A_WAITQUEUE_HEAD; -#define A_INIT_WAITQUEUE_HEAD(head) init_waitqueue_head(head) -#ifndef wait_event_interruptible_timeout -#define __wait_event_interruptible_timeout(wq, condition, ret) \ -do { \ - wait_queue_t __wait; \ - init_waitqueue_entry(&__wait, current); \ - \ - add_wait_queue(&wq, &__wait); \ - for (;;) { \ - set_current_state(TASK_INTERRUPTIBLE); \ - if (condition) \ - break; \ - if (!signal_pending(current)) { \ - ret = schedule_timeout(ret); \ - if (!ret) \ - break; \ - continue; \ - } \ - ret = -ERESTARTSYS; \ - break; \ - } \ - current->state = TASK_RUNNING; \ - remove_wait_queue(&wq, &__wait); \ -} while (0) - -#define wait_event_interruptible_timeout(wq, condition, timeout) \ -({ \ - long __ret = timeout; \ - if (!(condition)) \ - __wait_event_interruptible_timeout(wq, condition, __ret); \ - __ret; \ -}) -#endif /* wait_event_interruptible_timeout */ - -#define A_WAIT_EVENT_INTERRUPTIBLE_TIMEOUT(head, condition, timeout) do { \ - wait_event_interruptible_timeout(head, condition, timeout); \ -} while (0) - -#define A_WAKE_UP(head) wake_up(head) - -#ifdef DEBUG -extern unsigned int panic_on_assert; -#define A_ASSERT(expr) \ - if (!(expr)) { \ - printk(KERN_ALERT"Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#expr); \ - if (panic_on_assert) panic(#expr); \ - } -#else -#define A_ASSERT(expr) -#endif /* DEBUG */ - -#define A_REQUEST_FIRMWARE(_ppf, _pfile, _dev) request_firmware(_ppf, _pfile, _dev) -#define A_RELEASE_FIRMWARE(_pf) release_firmware(_pf) - -/* - * Initialization of the network buffer subsystem - */ -#define A_NETBUF_INIT() - -/* - * Network buffer queue support - */ -typedef struct sk_buff_head A_NETBUF_QUEUE_T; - -#define A_NETBUF_QUEUE_INIT(q) \ - a_netbuf_queue_init(q) - -#define A_NETBUF_ENQUEUE(q, pkt) \ - a_netbuf_enqueue((q), (pkt)) -#define A_NETBUF_PREQUEUE(q, pkt) \ - a_netbuf_prequeue((q), (pkt)) -#define A_NETBUF_DEQUEUE(q) \ - (a_netbuf_dequeue(q)) -#define A_NETBUF_QUEUE_SIZE(q) \ - a_netbuf_queue_size(q) -#define A_NETBUF_QUEUE_EMPTY(q) \ - (a_netbuf_queue_empty(q) ? true : false) - -/* - * Network buffer support - */ -#define A_NETBUF_ALLOC(size) \ - a_netbuf_alloc(size) -#define A_NETBUF_ALLOC_RAW(size) \ - a_netbuf_alloc_raw(size) -#define A_NETBUF_FREE(bufPtr) \ - a_netbuf_free(bufPtr) -#define A_NETBUF_DATA(bufPtr) \ - a_netbuf_to_data(bufPtr) -#define A_NETBUF_LEN(bufPtr) \ - a_netbuf_to_len(bufPtr) -#define A_NETBUF_PUSH(bufPtr, len) \ - a_netbuf_push(bufPtr, len) -#define A_NETBUF_PUT(bufPtr, len) \ - a_netbuf_put(bufPtr, len) -#define A_NETBUF_TRIM(bufPtr,len) \ - a_netbuf_trim(bufPtr, len) -#define A_NETBUF_PULL(bufPtr, len) \ - a_netbuf_pull(bufPtr, len) -#define A_NETBUF_HEADROOM(bufPtr)\ - a_netbuf_headroom(bufPtr) -#define A_NETBUF_SETLEN(bufPtr,len) \ - a_netbuf_setlen(bufPtr, len) - -/* Add data to end of a buffer */ -#define A_NETBUF_PUT_DATA(bufPtr, srcPtr, len) \ - a_netbuf_put_data(bufPtr, srcPtr, len) - -/* Add data to start of the buffer */ -#define A_NETBUF_PUSH_DATA(bufPtr, srcPtr, len) \ - a_netbuf_push_data(bufPtr, srcPtr, len) - -/* Remove data at start of the buffer */ -#define A_NETBUF_PULL_DATA(bufPtr, dstPtr, len) \ - a_netbuf_pull_data(bufPtr, dstPtr, len) - -/* Remove data from the end of the buffer */ -#define A_NETBUF_TRIM_DATA(bufPtr, dstPtr, len) \ - a_netbuf_trim_data(bufPtr, dstPtr, len) - -/* View data as "size" contiguous bytes of type "t" */ -#define A_NETBUF_VIEW_DATA(bufPtr, t, size) \ - (t )( ((struct skbuf *)(bufPtr))->data) - -/* return the beginning of the headroom for the buffer */ -#define A_NETBUF_HEAD(bufPtr) \ - ((((struct sk_buff *)(bufPtr))->head)) - -/* - * OS specific network buffer access routines - */ -void *a_netbuf_alloc(int size); -void *a_netbuf_alloc_raw(int size); -void a_netbuf_free(void *bufPtr); -void *a_netbuf_to_data(void *bufPtr); -u32 a_netbuf_to_len(void *bufPtr); -int a_netbuf_push(void *bufPtr, s32 len); -int a_netbuf_push_data(void *bufPtr, char *srcPtr, s32 len); -int a_netbuf_put(void *bufPtr, s32 len); -int a_netbuf_put_data(void *bufPtr, char *srcPtr, s32 len); -int a_netbuf_pull(void *bufPtr, s32 len); -int a_netbuf_pull_data(void *bufPtr, char *dstPtr, s32 len); -int a_netbuf_trim(void *bufPtr, s32 len); -int a_netbuf_trim_data(void *bufPtr, char *dstPtr, s32 len); -int a_netbuf_setlen(void *bufPtr, s32 len); -s32 a_netbuf_headroom(void *bufPtr); -void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt); -void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt); -void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q); -int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q); -int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q); -int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q); -void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q); - -/* - * Kernel v.s User space functions - */ -u32 a_copy_to_user(void *to, const void *from, u32 n); -u32 a_copy_from_user(void *to, const void *from, u32 n); - -/* In linux, WLAN Rx and Tx run in different contexts, so no need to check - * for any commands/data queued for WLAN */ -#define A_CHECK_DRV_TX() - -#define A_GET_CACHE_LINE_BYTES() L1_CACHE_BYTES - -#define A_CACHE_LINE_PAD 128 - -static inline void *A_ALIGN_TO_CACHE_LINE(void *ptr) { - return (void *)L1_CACHE_ALIGN((unsigned long)ptr); -} - -#else /* __KERNEL__ */ - -#ifdef __GNUC__ -#define __ATTRIB_PACK __attribute__ ((packed)) -#define __ATTRIB_PRINTF __attribute__ ((format (printf, 1, 2))) -#define __ATTRIB_NORETURN __attribute__ ((noreturn)) -#ifndef INLINE -#define INLINE __inline__ -#endif -#else /* Not GCC */ -#define __ATTRIB_PACK -#define __ATTRIB_PRINTF -#define __ATTRIB_NORETURN -#ifndef INLINE -#define INLINE __inline -#endif -#endif /* End __GNUC__ */ - -#define PREPACK -#define POSTPACK __ATTRIB_PACK - -#define A_MEMZERO(addr, len) memset((addr), 0, (len)) -#define A_MALLOC(size) malloc(size) - -#include <err.h> - -#endif /* __KERNEL__ */ - -#endif /* _OSAPI_LINUX_H_ */ diff --git a/drivers/staging/ath6kl/os/linux/include/wlan_config.h b/drivers/staging/ath6kl/os/linux/include/wlan_config.h deleted file mode 100644 index c1fe0c6e4fa..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/wlan_config.h +++ /dev/null @@ -1,108 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved. -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -//------------------------------------------------------------------------------ -//============================================================================== -// This file contains the tunable configuration items for the WLAN module -// -// Author(s): ="Atheros" -//============================================================================== -#ifndef _HOST_WLAN_CONFIG_H_ -#define _HOST_WLAN_CONFIG_H_ - -/* Include definitions here that can be used to tune the WLAN module behavior. - * Different customers can tune the behavior as per their needs, here. - */ - -/* This configuration item when defined will consider the barker preamble - * mentioned in the ERP IE of the beacons from the AP to determine the short - * preamble support sent in the (Re)Assoc request frames. - */ -#define WLAN_CONFIG_DONOT_IGNORE_BARKER_IN_ERP 0 - -/* This config item when defined will not send the power module state transition - * failure events that happen during scan, to the host. - */ -#define WLAN_CONFIG_IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN 0 - -/* - * This configuration item enable/disable keepalive support. - * Keepalive support: In the absence of any data traffic to AP, null - * frames will be sent to the AP at periodic interval, to keep the association - * active. This configuration item defines the periodic interval. - * Use value of zero to disable keepalive support - * Default: 60 seconds - */ -#define WLAN_CONFIG_KEEP_ALIVE_INTERVAL 60 - -/* - * This configuration item sets the value of disconnect timeout - * Firmware delays sending the disconnec event to the host for this - * timeout after is gets disconnected from the current AP. - * If the firmware successly roams within the disconnect timeout - * it sends a new connect event - */ -#define WLAN_CONFIG_DISCONNECT_TIMEOUT 10 - -/* - * This configuration item disables 11n support. - * 0 - Enable - * 1 - Disable - */ -#define WLAN_CONFIG_DISABLE_11N 0 - -/* - * This configuration item enable BT clock sharing support - * 1 - Enable - * 0 - Disable (Default) - */ -#define WLAN_CONFIG_BT_SHARING 0 - -/* - * This configuration item sets WIFI OFF policy - * 0 - CUT_POWER - * 1 - DEEP_SLEEP (Default) - */ -#define WLAN_CONFIG_WLAN_OFF 1 - -/* - * This configuration item sets suspend policy - * 0 - CUT_POWER (Default) - * 1 - DEEP_SLEEP - * 2 - WoW - * 3 - CUT_POWER if BT OFF (clock sharing designs only) - */ -#define WLAN_CONFIG_PM_SUSPEND 0 - -/* - * This configuration item sets suspend policy to use if PM_SUSPEND is - * set to WoW and device is not connected at the time of suspend - * 0 - CUT_POWER (Default) - * 1 - DEEP_SLEEP - * 2 - WoW - * 3 - CUT_POWER if BT OFF (clock sharing designs only) - */ -#define WLAN_CONFIG_PM_WOW2 0 - -/* - * This configuration item enables/disables transmit bursting - * 0 - Enable tx Bursting (default) - * 1 - Disable tx bursting - */ -#define WLAN_CONFIG_DISABLE_TX_BURSTING 0 - -#endif /* _HOST_WLAN_CONFIG_H_ */ diff --git a/drivers/staging/ath6kl/os/linux/include/wmi_filter_linux.h b/drivers/staging/ath6kl/os/linux/include/wmi_filter_linux.h deleted file mode 100644 index 1eb6f822d64..00000000000 --- a/drivers/staging/ath6kl/os/linux/include/wmi_filter_linux.h +++ /dev/null @@ -1,300 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -#ifndef _WMI_FILTER_LINUX_H_ -#define _WMI_FILTER_LINUX_H_ - -/* - * sioctl_filter - Standard ioctl - * pioctl_filter - Priv ioctl - * xioctl_filter - eXtended ioctl - * - * ---- Possible values for the WMI filter --------------- - * (0) - Block this cmd always (or) not implemented - * (INFRA_NETWORK) - Allow this cmd only in STA mode - * (ADHOC_NETWORK) - Allow this cmd only in IBSS mode - * (AP_NETWORK) - Allow this cmd only in AP mode - * (INFRA_NETWORK | ADHOC_NETWORK) - Block this cmd in AP mode - * (ADHOC_NETWORK | AP_NETWORK) - Block this cmd in STA mode - * (INFRA_NETWORK | AP_NETWORK) - Block this cmd in IBSS mode - * (INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK)- allow only when mode is set - * (0xFF) - Allow this cmd always irrespective of mode - */ - -u8 sioctl_filter[] = { -(AP_NETWORK), /* SIOCSIWCOMMIT 0x8B00 */ -(0xFF), /* SIOCGIWNAME 0x8B01 */ -(0), /* SIOCSIWNWID 0x8B02 */ -(0), /* SIOCGIWNWID 0x8B03 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCSIWFREQ 0x8B04 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCGIWFREQ 0x8B05 */ -(0xFF), /* SIOCSIWMODE 0x8B06 */ -(0xFF), /* SIOCGIWMODE 0x8B07 */ -(0), /* SIOCSIWSENS 0x8B08 */ -(0), /* SIOCGIWSENS 0x8B09 */ -(0), /* SIOCSIWRANGE 0x8B0A */ -(0xFF), /* SIOCGIWRANGE 0x8B0B */ -(0), /* SIOCSIWPRIV 0x8B0C */ -(0), /* SIOCGIWPRIV 0x8B0D */ -(0), /* SIOCSIWSTATS 0x8B0E */ -(0), /* SIOCGIWSTATS 0x8B0F */ -(0), /* SIOCSIWSPY 0x8B10 */ -(0), /* SIOCGIWSPY 0x8B11 */ -(0), /* SIOCSIWTHRSPY 0x8B12 */ -(0), /* SIOCGIWTHRSPY 0x8B13 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCSIWAP 0x8B14 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCGIWAP 0x8B15 */ -#if (WIRELESS_EXT >= 18) -(INFRA_NETWORK | ADHOC_NETWORK), /* SIOCSIWMLME 0X8B16 */ -#else -(0), /* Dummy 0 */ -#endif /* WIRELESS_EXT */ -(0), /* SIOCGIWAPLIST 0x8B17 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* SIOCSIWSCAN 0x8B18 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* SIOCGIWSCAN 0x8B19 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCSIWESSID 0x8B1A */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCGIWESSID 0x8B1B */ -(0), /* SIOCSIWNICKN 0x8B1C */ -(0), /* SIOCGIWNICKN 0x8B1D */ -(0), /* Dummy 0 */ -(0), /* Dummy 0 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCSIWRATE 0x8B20 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCGIWRATE 0x8B21 */ -(0), /* SIOCSIWRTS 0x8B22 */ -(0), /* SIOCGIWRTS 0x8B23 */ -(0), /* SIOCSIWFRAG 0x8B24 */ -(0), /* SIOCGIWFRAG 0x8B25 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCSIWTXPOW 0x8B26 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCGIWTXPOW 0x8B27 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* SIOCSIWRETRY 0x8B28 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* SIOCGIWRETRY 0x8B29 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCSIWENCODE 0x8B2A */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCGIWENCODE 0x8B2B */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCSIWPOWER 0x8B2C */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* SIOCGIWPOWER 0x8B2D */ -}; - - - -u8 pioctl_filter[] = { -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0) */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+1) */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+2) */ -(AP_NETWORK), /* IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+3) */ -(INFRA_NETWORK), /* IEEE80211_IOCTL_ADDPMKID (SIOCIWFIRSTPRIV+4) */ -(0), /* IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+5) */ -(0), /* (SIOCIWFIRSTPRIV+6) */ -(0), /* (SIOCIWFIRSTPRIV+7) */ -(0), /* (SIOCIWFIRSTPRIV+8) */ -(0), /* (SIOCIWFIRSTPRIV+9) */ -(0), /* IEEE80211_IOCTL_LASTONE (SIOCIWFIRSTPRIV+10) */ -(0xFF), /* AR6000_IOCTL_WMI_GETREV (SIOCIWFIRSTPRIV+11) */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_IOCTL_WMI_SETPWR (SIOCIWFIRSTPRIV+12) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SETSCAN (SIOCIWFIRSTPRIV+13) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SETLISTENINT (SIOCIWFIRSTPRIV+14) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SETBSSFILTER (SIOCIWFIRSTPRIV+15) */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_IOCTL_WMI_SET_CHANNELPARAMS (SIOCIWFIRSTPRIV+16) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SET_PROBEDSSID (SIOCIWFIRSTPRIV+17) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SET_PMPARAMS (SIOCIWFIRSTPRIV+18) */ -(INFRA_NETWORK), /* AR6000_IOCTL_WMI_SET_BADAP (SIOCIWFIRSTPRIV+19) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_GET_QOS_QUEUE (SIOCIWFIRSTPRIV+20) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_CREATE_QOS (SIOCIWFIRSTPRIV+21) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_DELETE_QOS (SIOCIWFIRSTPRIV+22) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SET_SNRTHRESHOLD (SIOCIWFIRSTPRIV+23) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24)*/ -(0xFF), /* AR6000_IOCTL_WMI_GET_TARGET_STATS (SIOCIWFIRSTPRIV+25) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SET_ASSOC_INFO (SIOCIWFIRSTPRIV+26) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SET_ACCESS_PARAMS (SIOCIWFIRSTPRIV+27) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SET_BMISS_TIME (SIOCIWFIRSTPRIV+28) */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SET_DISC_TIMEOUT (SIOCIWFIRSTPRIV+29) */ -(ADHOC_NETWORK), /* AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS (SIOCIWFIRSTPRIV+30) */ -}; - - - -u8 xioctl_filter[] = { -(0xFF), /* Dummy 0 */ -(0xFF), /* AR6000_XIOCTL_BMI_DONE 1 */ -(0xFF), /* AR6000_XIOCTL_BMI_READ_MEMORY 2 */ -(0xFF), /* AR6000_XIOCTL_BMI_WRITE_MEMORY 3 */ -(0xFF), /* AR6000_XIOCTL_BMI_EXECUTE 4 */ -(0xFF), /* AR6000_XIOCTL_BMI_SET_APP_START 5 */ -(0xFF), /* AR6000_XIOCTL_BMI_READ_SOC_REGISTER 6 */ -(0xFF), /* AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER 7 */ -(0xFF), /* AR6000_XIOCTL_BMI_TEST 8 */ -(0xFF), /* AR6000_XIOCTL_UNUSED9 9 */ -(0xFF), /* AR6000_XIOCTL_UNUSED10 10 */ -(0xFF), /* AR6000_XIOCTL_UNUSED11 11 */ -(0xFF), /* AR6000_XIOCTL_FORCE_TARGET_RESET 12 */ -(0xFF), /* AR6000_XIOCTL_HTC_RAW_OPEN 13 */ -(0xFF), /* AR6000_XIOCTL_HTC_RAW_CLOSE 14 */ -(0xFF), /* AR6000_XIOCTL_HTC_RAW_READ 15 */ -(0xFF), /* AR6000_XIOCTL_HTC_RAW_WRITE 16 */ -(0xFF), /* AR6000_XIOCTL_CHECK_TARGET_READY 17 */ -(0xFF), /* AR6000_XIOCTL_GPIO_OUTPUT_SET 18 */ -(0xFF), /* AR6000_XIOCTL_GPIO_INPUT_GET 19 */ -(0xFF), /* AR6000_XIOCTL_GPIO_REGISTER_SET 20 */ -(0xFF), /* AR6000_XIOCTL_GPIO_REGISTER_GET 21 */ -(0xFF), /* AR6000_XIOCTL_GPIO_INTR_ACK 22 */ -(0xFF), /* AR6000_XIOCTL_GPIO_INTR_WAIT 23 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_SET_ADHOC_BSSID 24 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_SET_OPT_MODE 25 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_OPT_SEND_FRAME 26 */ -(ADHOC_NETWORK | AP_NETWORK), /* AR6000_XIOCTL_SET_BEACON_INTVAL 27 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* IEEE80211_IOCTL_SETAUTHALG 28 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_SET_VOICE_PKT_SIZE 29 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_SET_MAX_SP 30 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_GET_ROAM_TBL 31 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_ROAM_CTRL 32 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS 33 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_XIOCTRL_WMI_GET_POWER_MODE 34 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_XIOCTRL_WMI_SET_WLAN_STATE 35 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_GET_ROAM_DATA 36 */ -(0xFF), /* AR6000_XIOCTL_WMI_SETRETRYLIMITS 37 */ -(0xFF), /* AR6000_XIOCTL_TCMD_CONT_TX 38 */ -(0xFF), /* AR6000_XIOCTL_TCMD_CONT_RX 39 */ -(0xFF), /* AR6000_XIOCTL_TCMD_PM 40 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_STARTSCAN 41 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_XIOCTL_WMI_SETFIXRATES 42 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_XIOCTL_WMI_GETFIXRATES 43 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD 44 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_CLR_RSSISNR 45 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_LQTHRESHOLD 46 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_XIOCTL_WMI_SET_RTS 47 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_XIOCTL_WMI_SET_LPREAMBLE 48 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_XIOCTL_WMI_SET_AUTHMODE 49 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_REASSOCMODE 50 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_WMM 51 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS 52 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP 53 */ -(INFRA_NETWORK | ADHOC_NETWORK | AP_NETWORK), /* AR6000_XIOCTL_WMI_GET_RD 54 */ -(0xFF), /* AR6000_XIOCTL_DIAG_READ 55 */ -(0xFF), /* AR6000_XIOCTL_DIAG_WRITE 56 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_TXOP 57 */ -(INFRA_NETWORK), /* AR6000_XIOCTL_USER_SETKEYS 58 */ -(INFRA_NETWORK), /* AR6000_XIOCTL_WMI_SET_KEEPALIVE 59 */ -(INFRA_NETWORK), /* AR6000_XIOCTL_WMI_GET_KEEPALIVE 60 */ -(0xFF), /* AR6000_XIOCTL_BMI_ROMPATCH_INSTALL 61 */ -(0xFF), /* AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL 62 */ -(0xFF), /* AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE 63 */ -(0xFF), /* AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE 64 */ -(0xFF), /* AR6000_XIOCTL_WMI_SET_APPIE 65 */ -(0xFF), /* AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER 66 */ -(0xFF), /* AR6000_XIOCTL_DBGLOG_CFG_MODULE 67 */ -(0xFF), /* AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS 68 */ -(0xFF), /* Dummy 69 */ -(0xFF), /* AR6000_XIOCTL_WMI_SET_WSC_STATUS 70 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BT_STATUS 71 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BT_PARAMS 72 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE 73 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_WOW_MODE 74 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_GET_WOW_LIST 75 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_ADD_WOW_PATTERN 76 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_DEL_WOW_PATTERN 77 */ -(0xFF), /* AR6000_XIOCTL_TARGET_INFO 78 */ -(0xFF), /* AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE 79 */ -(0xFF), /* AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE 80 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS 81 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_AKMP_PARAMS 82 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_GET_PMKID_LIST 83 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_PMKID_LIST 84 */ -(0xFF), /* Dummy 85 */ -(0xFF), /* Dummy 86 */ -(0xFF), /* Dummy 87 */ -(0xFF), /* Dummy 88 */ -(0xFF), /* Dummy 89 */ -(0xFF), /* AR6000_XIOCTL_UNUSED90 90 */ -(0xFF), /* AR6000_XIOCTL_BMI_LZ_STREAM_START 91 */ -(0xFF), /* AR6000_XIOCTL_BMI_LZ_DATA 92 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_PROF_CFG 93 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_PROF_ADDR_SET 94 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_PROF_START 95 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_PROF_STOP 96 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_PROF_COUNT_GET 97 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_ABORT_SCAN 98 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_GET_STA_LIST 99 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_HIDDEN_SSID 100 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_SET_NUM_STA 101 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_SET_ACL_MAC 102 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_GET_ACL_LIST 103 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_COMMIT_CONFIG 104 */ -(AP_NETWORK), /* IEEE80211_IOCTL_GETWPAIE 105 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_CONN_INACT_TIME 106 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_PROT_SCAN_TIME 107 */ -(AP_NETWORK), /* AR6000_XIOCTL_WMI_SET_COUNTRY 108 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_SET_DTIM 109 */ -(0xFF), /* AR6000_XIOCTL_WMI_TARGET_EVENT_REPORT 110 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_SET_IP 111 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_SET_ACL_POLICY 112 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_INTRA_BSS_COMM 113 */ -(0xFF), /* AR6000_XIOCTL_DUMP_MODULE_DEBUG_INFO 114 */ -(0xFF), /* AR6000_XIOCTL_MODULE_DEBUG_SET_MASK 115 */ -(0xFF), /* AR6000_XIOCTL_MODULE_DEBUG_GET_MASK 116 */ -(0xFF), /* AR6000_XIOCTL_DUMP_RCV_AGGR_STATS 117 */ -(0xFF), /* AR6000_XIOCTL_SET_HT_CAP 118 */ -(0xFF), /* AR6000_XIOCTL_SET_HT_OP 119 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_GET_STAT 120 */ -(0xFF), /* AR6000_XIOCTL_SET_TX_SELECT_RATES 121 */ -(0xFF), /* AR6000_XIOCTL_SETUP_AGGR 122 */ -(0xFF), /* AR6000_XIOCTL_ALLOW_AGGR 123 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_GET_HIDDEN_SSID 124 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_GET_COUNTRY 125 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_GET_WMODE 126 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_GET_DTIM 127 */ -(AP_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_AP_GET_BINTVL 128 */ -(0xFF), /* AR6000_XIOCTL_AP_GET_RTS 129 */ -(0xFF), /* AR6000_XIOCTL_DELE_AGGR 130 */ -(0xFF), /* AR6000_XIOCTL_FETCH_TARGET_REGS 131 */ -(0xFF), /* AR6000_XIOCTL_HCI_CMD 132 */ -(0xFF), /* AR6000_XIOCTL_ACL_DATA(used to be used for PAL) 133 */ -(0xFF), /* AR6000_XIOCTL_WLAN_CONN_PRECEDENCE 134 */ -(AP_NETWORK), /* AR6000_XIOCTL_AP_SET_11BG_RATESET 135 */ -(0xFF), -(0xFF), -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BTCOEX_FE_ANT 138 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BTCOEX_COLOCATED_BT_DEV 139 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BTCOEX_BTINQUIRY_PAGE_CONFIG 140 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BTCOEX_SCO_CONFIG 141 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BTCOEX_A2DP_CONFIG 142 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BTCOEX_ACLCOEX_CONFIG 143 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BTCOEX_DEBUG 144 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_BT_OPERATING_STATUS 145 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_GET_BTCOEX_CONFIG 146 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_GET_BTCOEX_GET_STATS 147 */ -(0xFF), /* AR6000_XIOCTL_WMI_SET_QOS_SUPP 148 */ -(0xFF), /* AR6000_XIOCTL_GET_WLAN_SLEEP_STATE 149 */ -(0xFF), /* AR6000_XIOCTL_SET_BT_HW_POWER_STATE 150 */ -(0xFF), /* AR6000_XIOCTL_GET_BT_HW_POWER_STATE 151 */ -(0xFF), /* AR6000_XIOCTL_ADD_AP_INTERFACE 152 */ -(0xFF), /* AR6000_XIOCTL_REMOVE_AP_INTERFACE 153 */ -(0xFF), /* AR6000_XIOCTL_WMI_SET_TX_SGI_PARAM 154 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_WPA_OFFLOAD_STATE 155 */ -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_PASSPHRASE 156 */ -(0xFF), -(0xFF), -(0xFF), -(0xFF), -(INFRA_NETWORK | ADHOC_NETWORK), /* AR6000_XIOCTL_WMI_SET_EXCESS_TX_RETRY_THRES 161 */ -}; - -#endif /*_WMI_FILTER_LINUX_H_*/ diff --git a/drivers/staging/ath6kl/os/linux/netbuf.c b/drivers/staging/ath6kl/os/linux/netbuf.c deleted file mode 100644 index 963a2fb76a9..00000000000 --- a/drivers/staging/ath6kl/os/linux/netbuf.c +++ /dev/null @@ -1,231 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ -#include <a_config.h> -#include "athdefs.h" -#include "a_osapi.h" -#include "htc_packet.h" - -#define AR6000_DATA_OFFSET 64 - -void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt) -{ - skb_queue_tail((struct sk_buff_head *) q, (struct sk_buff *) pkt); -} - -void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt) -{ - skb_queue_head((struct sk_buff_head *) q, (struct sk_buff *) pkt); -} - -void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q) -{ - return((void *) skb_dequeue((struct sk_buff_head *) q)); -} - -int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q) -{ - return(skb_queue_len((struct sk_buff_head *) q)); -} - -int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q) -{ - return(skb_queue_empty((struct sk_buff_head *) q)); -} - -void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q) -{ - skb_queue_head_init((struct sk_buff_head *) q); -} - -void * -a_netbuf_alloc(int size) -{ - struct sk_buff *skb; - size += 2 * (A_GET_CACHE_LINE_BYTES()); /* add some cacheline space at front and back of buffer */ - skb = dev_alloc_skb(AR6000_DATA_OFFSET + sizeof(struct htc_packet) + size); - skb_reserve(skb, AR6000_DATA_OFFSET + sizeof(struct htc_packet) + A_GET_CACHE_LINE_BYTES()); - return ((void *)skb); -} - -/* - * Allocate an SKB w.o. any encapsulation requirement. - */ -void * -a_netbuf_alloc_raw(int size) -{ - struct sk_buff *skb; - - skb = dev_alloc_skb(size); - - return ((void *)skb); -} - -void -a_netbuf_free(void *bufPtr) -{ - struct sk_buff *skb = (struct sk_buff *)bufPtr; - - dev_kfree_skb(skb); -} - -u32 a_netbuf_to_len(void *bufPtr) -{ - return (((struct sk_buff *)bufPtr)->len); -} - -void * -a_netbuf_to_data(void *bufPtr) -{ - return (((struct sk_buff *)bufPtr)->data); -} - -/* - * Add len # of bytes to the beginning of the network buffer - * pointed to by bufPtr - */ -int -a_netbuf_push(void *bufPtr, s32 len) -{ - skb_push((struct sk_buff *)bufPtr, len); - - return 0; -} - -/* - * Add len # of bytes to the beginning of the network buffer - * pointed to by bufPtr and also fill with data - */ -int -a_netbuf_push_data(void *bufPtr, char *srcPtr, s32 len) -{ - skb_push((struct sk_buff *) bufPtr, len); - memcpy(((struct sk_buff *)bufPtr)->data, srcPtr, len); - - return 0; -} - -/* - * Add len # of bytes to the end of the network buffer - * pointed to by bufPtr - */ -int -a_netbuf_put(void *bufPtr, s32 len) -{ - skb_put((struct sk_buff *)bufPtr, len); - - return 0; -} - -/* - * Add len # of bytes to the end of the network buffer - * pointed to by bufPtr and also fill with data - */ -int -a_netbuf_put_data(void *bufPtr, char *srcPtr, s32 len) -{ - char *start = (char*)(((struct sk_buff *)bufPtr)->data + - ((struct sk_buff *)bufPtr)->len); - skb_put((struct sk_buff *)bufPtr, len); - memcpy(start, srcPtr, len); - - return 0; -} - - -/* - * Trim the network buffer pointed to by bufPtr to len # of bytes - */ -int -a_netbuf_setlen(void *bufPtr, s32 len) -{ - skb_trim((struct sk_buff *)bufPtr, len); - - return 0; -} - -/* - * Chop of len # of bytes from the end of the buffer. - */ -int -a_netbuf_trim(void *bufPtr, s32 len) -{ - skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len); - - return 0; -} - -/* - * Chop of len # of bytes from the end of the buffer and return the data. - */ -int -a_netbuf_trim_data(void *bufPtr, char *dstPtr, s32 len) -{ - char *start = (char*)(((struct sk_buff *)bufPtr)->data + - (((struct sk_buff *)bufPtr)->len - len)); - - memcpy(dstPtr, start, len); - skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len); - - return 0; -} - - -/* - * Returns the number of bytes available to a a_netbuf_push() - */ -s32 a_netbuf_headroom(void *bufPtr) -{ - return (skb_headroom((struct sk_buff *)bufPtr)); -} - -/* - * Removes specified number of bytes from the beginning of the buffer - */ -int -a_netbuf_pull(void *bufPtr, s32 len) -{ - skb_pull((struct sk_buff *)bufPtr, len); - - return 0; -} - -/* - * Removes specified number of bytes from the beginning of the buffer - * and return the data - */ -int -a_netbuf_pull_data(void *bufPtr, char *dstPtr, s32 len) -{ - memcpy(dstPtr, ((struct sk_buff *)bufPtr)->data, len); - skb_pull((struct sk_buff *)bufPtr, len); - - return 0; -} - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -EXPORT_SYMBOL(a_netbuf_to_data); -EXPORT_SYMBOL(a_netbuf_put); -EXPORT_SYMBOL(a_netbuf_pull); -EXPORT_SYMBOL(a_netbuf_alloc); -EXPORT_SYMBOL(a_netbuf_free); -#endif |