diff options
Diffstat (limited to 'drivers/net/cxgb4/t4_hw.c')
| -rw-r--r-- | drivers/net/cxgb4/t4_hw.c | 2856 |
1 files changed, 0 insertions, 2856 deletions
diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/cxgb4/t4_hw.c deleted file mode 100644 index d1ec111aebd..00000000000 --- a/drivers/net/cxgb4/t4_hw.c +++ /dev/null @@ -1,2856 +0,0 @@ -/* - * This file is part of the Chelsio T4 Ethernet driver for Linux. - * - * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#include <linux/init.h> -#include <linux/delay.h> -#include "cxgb4.h" -#include "t4_regs.h" -#include "t4fw_api.h" - -/** - * t4_wait_op_done_val - wait until an operation is completed - * @adapter: the adapter performing the operation - * @reg: the register to check for completion - * @mask: a single-bit field within @reg that indicates completion - * @polarity: the value of the field when the operation is completed - * @attempts: number of check iterations - * @delay: delay in usecs between iterations - * @valp: where to store the value of the register at completion time - * - * Wait until an operation is completed by checking a bit in a register - * up to @attempts times. If @valp is not NULL the value of the register - * at the time it indicated completion is stored there. Returns 0 if the - * operation completes and -EAGAIN otherwise. - */ -static int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask, - int polarity, int attempts, int delay, u32 *valp) -{ - while (1) { - u32 val = t4_read_reg(adapter, reg); - - if (!!(val & mask) == polarity) { - if (valp) - *valp = val; - return 0; - } - if (--attempts == 0) - return -EAGAIN; - if (delay) - udelay(delay); - } -} - -static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask, - int polarity, int attempts, int delay) -{ - return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts, - delay, NULL); -} - -/** - * t4_set_reg_field - set a register field to a value - * @adapter: the adapter to program - * @addr: the register address - * @mask: specifies the portion of the register to modify - * @val: the new value for the register field - * - * Sets a register field specified by the supplied mask to the - * given value. - */ -void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask, - u32 val) -{ - u32 v = t4_read_reg(adapter, addr) & ~mask; - - t4_write_reg(adapter, addr, v | val); - (void) t4_read_reg(adapter, addr); /* flush */ -} - -/** - * t4_read_indirect - read indirectly addressed registers - * @adap: the adapter - * @addr_reg: register holding the indirect address - * @data_reg: register holding the value of the indirect register - * @vals: where the read register values are stored - * @nregs: how many indirect registers to read - * @start_idx: index of first indirect register to read - * - * Reads registers that are accessed indirectly through an address/data - * register pair. - */ -static void t4_read_indirect(struct adapter *adap, unsigned int addr_reg, - unsigned int data_reg, u32 *vals, - unsigned int nregs, unsigned int start_idx) -{ - while (nregs--) { - t4_write_reg(adap, addr_reg, start_idx); - *vals++ = t4_read_reg(adap, data_reg); - start_idx++; - } -} - -/* - * Get the reply to a mailbox command and store it in @rpl in big-endian order. - */ -static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit, - u32 mbox_addr) -{ - for ( ; nflit; nflit--, mbox_addr += 8) - *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr)); -} - -/* - * Handle a FW assertion reported in a mailbox. - */ -static void fw_asrt(struct adapter *adap, u32 mbox_addr) -{ - struct fw_debug_cmd asrt; - - get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr); - dev_alert(adap->pdev_dev, - "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n", - asrt.u.assert.filename_0_7, ntohl(asrt.u.assert.line), - ntohl(asrt.u.assert.x), ntohl(asrt.u.assert.y)); -} - -static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg) -{ - dev_err(adap->pdev_dev, - "mbox %d: %llx %llx %llx %llx %llx %llx %llx %llx\n", mbox, - (unsigned long long)t4_read_reg64(adap, data_reg), - (unsigned long long)t4_read_reg64(adap, data_reg + 8), - (unsigned long long)t4_read_reg64(adap, data_reg + 16), - (unsigned long long)t4_read_reg64(adap, data_reg + 24), - (unsigned long long)t4_read_reg64(adap, data_reg + 32), - (unsigned long long)t4_read_reg64(adap, data_reg + 40), - (unsigned long long)t4_read_reg64(adap, data_reg + 48), - (unsigned long long)t4_read_reg64(adap, data_reg + 56)); -} - -/** - * t4_wr_mbox_meat - send a command to FW through the given mailbox - * @adap: the adapter - * @mbox: index of the mailbox to use - * @cmd: the command to write - * @size: command length in bytes - * @rpl: where to optionally store the reply - * @sleep_ok: if true we may sleep while awaiting command completion - * - * Sends the given command to FW through the selected mailbox and waits - * for the FW to execute the command. If @rpl is not %NULL it is used to - * store the FW's reply to the command. The command and its optional - * reply are of the same length. FW can take up to %FW_CMD_MAX_TIMEOUT ms - * to respond. @sleep_ok determines whether we may sleep while awaiting - * the response. If sleeping is allowed we use progressive backoff - * otherwise we spin. - * - * The return value is 0 on success or a negative errno on failure. A - * failure can happen either because we are not able to execute the - * command or FW executes it but signals an error. In the latter case - * the return value is the error code indicated by FW (negated). - */ -int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, - void *rpl, bool sleep_ok) -{ - static const int delay[] = { - 1, 1, 3, 5, 10, 10, 20, 50, 100, 200 - }; - - u32 v; - u64 res; - int i, ms, delay_idx; - const __be64 *p = cmd; - u32 data_reg = PF_REG(mbox, CIM_PF_MAILBOX_DATA); - u32 ctl_reg = PF_REG(mbox, CIM_PF_MAILBOX_CTRL); - - if ((size & 15) || size > MBOX_LEN) - return -EINVAL; - - /* - * If the device is off-line, as in EEH, commands will time out. - * Fail them early so we don't waste time waiting. - */ - if (adap->pdev->error_state != pci_channel_io_normal) - return -EIO; - - v = MBOWNER_GET(t4_read_reg(adap, ctl_reg)); - for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++) - v = MBOWNER_GET(t4_read_reg(adap, ctl_reg)); - - if (v != MBOX_OWNER_DRV) - return v ? -EBUSY : -ETIMEDOUT; - - for (i = 0; i < size; i += 8) - t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++)); - - t4_write_reg(adap, ctl_reg, MBMSGVALID | MBOWNER(MBOX_OWNER_FW)); - t4_read_reg(adap, ctl_reg); /* flush write */ - - delay_idx = 0; - ms = delay[0]; - - for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) { - if (sleep_ok) { - ms = delay[delay_idx]; /* last element may repeat */ - if (delay_idx < ARRAY_SIZE(delay) - 1) - delay_idx++; - msleep(ms); - } else - mdelay(ms); - - v = t4_read_reg(adap, ctl_reg); - if (MBOWNER_GET(v) == MBOX_OWNER_DRV) { - if (!(v & MBMSGVALID)) { - t4_write_reg(adap, ctl_reg, 0); - continue; - } - - res = t4_read_reg64(adap, data_reg); - if (FW_CMD_OP_GET(res >> 32) == FW_DEBUG_CMD) { - fw_asrt(adap, data_reg); - res = FW_CMD_RETVAL(EIO); - } else if (rpl) - get_mbox_rpl(adap, rpl, size / 8, data_reg); - - if (FW_CMD_RETVAL_GET((int)res)) - dump_mbox(adap, mbox, data_reg); - t4_write_reg(adap, ctl_reg, 0); - return -FW_CMD_RETVAL_GET((int)res); - } - } - - dump_mbox(adap, mbox, data_reg); - dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n", - *(const u8 *)cmd, mbox); - return -ETIMEDOUT; -} - -/** - * t4_mc_read - read from MC through backdoor accesses - * @adap: the adapter - * @addr: address of first byte requested - * @data: 64 bytes of data containing the requested address - * @ecc: where to store the corresponding 64-bit ECC word - * - * Read 64 bytes of data from MC starting at a 64-byte-aligned address - * that covers the requested address @addr. If @parity is not %NULL it - * is assigned the 64-bit ECC word for the read data. - */ -int t4_mc_read(struct adapter *adap, u32 addr, __be32 *data, u64 *ecc) -{ - int i; - - if (t4_read_reg(adap, MC_BIST_CMD) & START_BIST) - return -EBUSY; - t4_write_reg(adap, MC_BIST_CMD_ADDR, addr & ~0x3fU); - t4_write_reg(adap, MC_BIST_CMD_LEN, 64); - t4_write_reg(adap, MC_BIST_DATA_PATTERN, 0xc); - t4_write_reg(adap, MC_BIST_CMD, BIST_OPCODE(1) | START_BIST | - BIST_CMD_GAP(1)); - i = t4_wait_op_done(adap, MC_BIST_CMD, START_BIST, 0, 10, 1); - if (i) - return i; - -#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i) - - for (i = 15; i >= 0; i--) - *data++ = htonl(t4_read_reg(adap, MC_DATA(i))); - if (ecc) - *ecc = t4_read_reg64(adap, MC_DATA(16)); -#undef MC_DATA - return 0; -} - -/** - * t4_edc_read - read from EDC through backdoor accesses - * @adap: the adapter - * @idx: which EDC to access - * @addr: address of first byte requested - * @data: 64 bytes of data containing the requested address - * @ecc: where to store the corresponding 64-bit ECC word - * - * Read 64 bytes of data from EDC starting at a 64-byte-aligned address - * that covers the requested address @addr. If @parity is not %NULL it - * is assigned the 64-bit ECC word for the read data. - */ -int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) -{ - int i; - - idx *= EDC_STRIDE; - if (t4_read_reg(adap, EDC_BIST_CMD + idx) & START_BIST) - return -EBUSY; - t4_write_reg(adap, EDC_BIST_CMD_ADDR + idx, addr & ~0x3fU); - t4_write_reg(adap, EDC_BIST_CMD_LEN + idx, 64); - t4_write_reg(adap, EDC_BIST_DATA_PATTERN + idx, 0xc); - t4_write_reg(adap, EDC_BIST_CMD + idx, - BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST); - i = t4_wait_op_done(adap, EDC_BIST_CMD + idx, START_BIST, 0, 10, 1); - if (i) - return i; - -#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx) - - for (i = 15; i >= 0; i--) - *data++ = htonl(t4_read_reg(adap, EDC_DATA(i))); - if (ecc) - *ecc = t4_read_reg64(adap, EDC_DATA(16)); -#undef EDC_DATA - return 0; -} - -#define EEPROM_STAT_ADDR 0x7bfc -#define VPD_BASE 0 -#define VPD_LEN 512 - -/** - * t4_seeprom_wp - enable/disable EEPROM write protection - * @adapter: the adapter - * @enable: whether to enable or disable write protection - * - * Enables or disables write protection on the serial EEPROM. - */ -int t4_seeprom_wp(struct adapter *adapter, bool enable) -{ - unsigned int v = enable ? 0xc : 0; - int ret = pci_write_vpd(adapter->pdev, EEPROM_STAT_ADDR, 4, &v); - return ret < 0 ? ret : 0; -} - -/** - * get_vpd_params - read VPD parameters from VPD EEPROM - * @adapter: adapter to read - * @p: where to store the parameters - * - * Reads card parameters stored in VPD EEPROM. - */ -static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) -{ - int i, ret; - int ec, sn; - u8 vpd[VPD_LEN], csum; - unsigned int vpdr_len, kw_offset, id_len; - - ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(vpd), vpd); - if (ret < 0) - return ret; - - if (vpd[0] != PCI_VPD_LRDT_ID_STRING) { - dev_err(adapter->pdev_dev, "missing VPD ID string\n"); - return -EINVAL; - } - - id_len = pci_vpd_lrdt_size(vpd); - if (id_len > ID_LEN) - id_len = ID_LEN; - - i = pci_vpd_find_tag(vpd, 0, VPD_LEN, PCI_VPD_LRDT_RO_DATA); - if (i < 0) { - dev_err(adapter->pdev_dev, "missing VPD-R section\n"); - return -EINVAL; - } - - vpdr_len = pci_vpd_lrdt_size(&vpd[i]); - kw_offset = i + PCI_VPD_LRDT_TAG_SIZE; - if (vpdr_len + kw_offset > VPD_LEN) { - dev_err(adapter->pdev_dev, "bad VPD-R length %u\n", vpdr_len); - return -EINVAL; - } - -#define FIND_VPD_KW(var, name) do { \ - var = pci_vpd_find_info_keyword(vpd, kw_offset, vpdr_len, name); \ - if (var < 0) { \ - dev_err(adapter->pdev_dev, "missing VPD keyword " name "\n"); \ - return -EINVAL; \ - } \ - var += PCI_VPD_INFO_FLD_HDR_SIZE; \ -} while (0) - - FIND_VPD_KW(i, "RV"); - for (csum = 0; i >= 0; i--) - csum += vpd[i]; - - if (csum) { - dev_err(adapter->pdev_dev, - "corrupted VPD EEPROM, actual csum %u\n", csum); - return -EINVAL; - } - - FIND_VPD_KW(ec, "EC"); - FIND_VPD_KW(sn, "SN"); -#undef FIND_VPD_KW - - memcpy(p->id, vpd + PCI_VPD_LRDT_TAG_SIZE, id_len); - strim(p->id); - memcpy(p->ec, vpd + ec, EC_LEN); - strim(p->ec); - i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE); - memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); - strim(p->sn); - return 0; -} - -/* serial flash and firmware constants */ -enum { - SF_ATTEMPTS = 10, /* max retries for SF operations */ - - /* flash command opcodes */ - SF_PROG_PAGE = 2, /* program page */ - SF_WR_DISABLE = 4, /* disable writes */ - SF_RD_STATUS = 5, /* read status register */ - SF_WR_ENABLE = 6, /* enable writes */ - SF_RD_DATA_FAST = 0xb, /* read flash */ - SF_RD_ID = 0x9f, /* read ID */ - SF_ERASE_SECTOR = 0xd8, /* erase sector */ - - FW_MAX_SIZE = 512 * 1024, -}; - -/** - * sf1_read - read data from the serial flash - * @adapter: the adapter - * @byte_cnt: number of bytes to read - * @cont: whether another operation will be chained - * @lock: whether to lock SF for PL access only - * @valp: where to store the read data - * - * Reads up to 4 bytes of data from the serial flash. The location of - * the read needs to be specified prior to calling this by issuing the - * appropriate commands to the serial flash. - */ -static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont, - int lock, u32 *valp) -{ - int ret; - - if (!byte_cnt || byte_cnt > 4) - return -EINVAL; - if (t4_read_reg(adapter, SF_OP) & BUSY) - return -EBUSY; - cont = cont ? SF_CONT : 0; - lock = lock ? SF_LOCK : 0; - t4_write_reg(adapter, SF_OP, lock | cont | BYTECNT(byte_cnt - 1)); - ret = t4_wait_op_done(adapter, SF_OP, BUSY, 0, SF_ATTEMPTS, 5); - if (!ret) - *valp = t4_read_reg(adapter, SF_DATA); - return ret; -} - -/** - * sf1_write - write data to the serial flash - * @adapter: the adapter - * @byte_cnt: number of bytes to write - * @cont: whether another operation will be chained - * @lock: whether to lock SF for PL access only - * @val: value to write - * - * Writes up to 4 bytes of data to the serial flash. The location of - * the write needs to be specified prior to calling this by issuing the - * appropriate commands to the serial flash. - */ -static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont, - int lock, u32 val) -{ - if (!byte_cnt || byte_cnt > 4) - return -EINVAL; - if (t4_read_reg(adapter, SF_OP) & BUSY) - return -EBUSY; - cont = cont ? SF_CONT : 0; - lock = lock ? SF_LOCK : 0; - t4_write_reg(adapter, SF_DATA, val); - t4_write_reg(adapter, SF_OP, lock | - cont | BYTECNT(byte_cnt - 1) | OP_WR); - return t4_wait_op_done(adapter, SF_OP, BUSY, 0, SF_ATTEMPTS, 5); -} - -/** - * flash_wait_op - wait for a flash operation to complete - * @adapter: the adapter - * @attempts: max number of polls of the status register - * @delay: delay between polls in ms - * - * Wait for a flash operation to complete by polling the status register. - */ -static int flash_wait_op(struct adapter *adapter, int attempts, int delay) -{ - int ret; - u32 status; - - while (1) { - if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 || - (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0) - return ret; - if (!(status & 1)) - return 0; - if (--attempts == 0) - return -EAGAIN; - if (delay) - msleep(delay); - } -} - -/** - * t4_read_flash - read words from serial flash - * @adapter: the adapter - * @addr: the start address for the read - * @nwords: how many 32-bit words to read - * @data: where to store the read data - * @byte_oriented: whether to store data as bytes or as words - * - * Read the specified number of 32-bit words from the serial flash. - * If @byte_oriented is set the read data is stored as a byte array - * (i.e., big-endian), otherwise as 32-bit words in the platform's - * natural endianess. - */ -static int t4_read_flash(struct adapter *adapter, unsigned int addr, - unsigned int nwords, u32 *data, int byte_oriented) -{ - int ret; - - if (addr + nwords * sizeof(u32) > adapter->params.sf_size || (addr & 3)) - return -EINVAL; - - addr = swab32(addr) | SF_RD_DATA_FAST; - - if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 || - (ret = sf1_read(adapter, 1, 1, 0, data)) != 0) - return ret; - - for ( ; nwords; nwords--, data++) { - ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data); - if (nwords == 1) - t4_write_reg(adapter, SF_OP, 0); /* unlock SF */ - if (ret) - return ret; - if (byte_oriented) - *data = htonl(*data); - } - return 0; -} - -/** - * t4_write_flash - write up to a page of data to the serial flash - * @adapter: the adapter - * @addr: the start address to write - * @n: length of data to write in bytes - * @data: the data to write - * - * Writes up to a page of data (256 bytes) to the serial flash starting - * at the given address. All the data must be written to the same page. - */ -static int t4_write_flash(struct adapter *adapter, unsigned int addr, - unsigned int n, const u8 *data) -{ - int ret; - u32 buf[64]; - unsigned int i, c, left, val, offset = addr & 0xff; - - if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE) - return -EINVAL; - - val = swab32(addr) | SF_PROG_PAGE; - - if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || - (ret = sf1_write(adapter, 4, 1, 1, val)) != 0) - goto unlock; - - for (left = n; left; left -= c) { - c = min(left, 4U); - for (val = 0, i = 0; i < c; ++i) - val = (val << 8) + *data++; - - ret = sf1_write(adapter, c, c != left, 1, val); - if (ret) - goto unlock; - } - ret = flash_wait_op(adapter, 8, 1); - if (ret) - goto unlock; - - t4_write_reg(adapter, SF_OP, 0); /* unlock SF */ - - /* Read the page to verify the write succeeded */ - ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); - if (ret) - return ret; - - if (memcmp(data - n, (u8 *)buf + offset, n)) { - dev_err(adapter->pdev_dev, - "failed to correctly write the flash page at %#x\n", - addr); - return -EIO; - } - return 0; - -unlock: - t4_write_reg(adapter, SF_OP, 0); /* unlock SF */ - return ret; -} - -/** - * get_fw_version - read the firmware version - * @adapter: the adapter - * @vers: where to place the version - * - * Reads the FW version from flash. - */ -static int get_fw_version(struct adapter *adapter, u32 *vers) -{ - return t4_read_flash(adapter, adapter->params.sf_fw_start + - offsetof(struct fw_hdr, fw_ver), 1, vers, 0); -} - -/** - * get_tp_version - read the TP microcode version - * @adapter: the adapter - * @vers: where to place the version - * - * Reads the TP microcode version from flash. - */ -static int get_tp_version(struct adapter *adapter, u32 *vers) -{ - return t4_read_flash(adapter, adapter->params.sf_fw_start + - offsetof(struct fw_hdr, tp_microcode_ver), - 1, vers, 0); -} - -/** - * t4_check_fw_version - check if the FW is compatible with this driver - * @adapter: the adapter - * - * Checks if an adapter's FW is compatible with the driver. Returns 0 - * if there's exact match, a negative error if the version could not be - * read or there's a major version mismatch, and a positive value if the - * expected major version is found but there's a minor version mismatch. - */ -int t4_check_fw_version(struct adapter *adapter) -{ - u32 api_vers[2]; - int ret, major, minor, micro; - - ret = get_fw_version(adapter, &adapter->params.fw_vers); - if (!ret) - ret = get_tp_version(adapter, &adapter->params.tp_vers); - if (!ret) - ret = t4_read_flash(adapter, adapter->params.sf_fw_start + - offsetof(struct fw_hdr, intfver_nic), - 2, api_vers, 1); - if (ret) - return ret; - - major = FW_HDR_FW_VER_MAJOR_GET(adapter->params.fw_vers); - minor = FW_HDR_FW_VER_MINOR_GET(adapter->params.fw_vers); - micro = FW_HDR_FW_VER_MICRO_GET(adapter->params.fw_vers); - memcpy(adapter->params.api_vers, api_vers, - sizeof(adapter->params.api_vers)); - - if (major != FW_VERSION_MAJOR) { /* major mismatch - fail */ - dev_err(adapter->pdev_dev, - "card FW has major version %u, driver wants %u\n", - major, FW_VERSION_MAJOR); - return -EINVAL; - } - - if (minor == FW_VERSION_MINOR && micro == FW_VERSION_MICRO) - return 0; /* perfect match */ - - /* Minor/micro version mismatch. Report it but often it's OK. */ - return 1; -} - -/** - * t4_flash_erase_sectors - erase a range of flash sectors - * @adapter: the adapter - * @start: the first sector to erase - * @end: the last sector to erase - * - * Erases the sectors in the given inclusive range. - */ -static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end) -{ - int ret = 0; - - while (start <= end) { - if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || - (ret = sf1_write(adapter, 4, 0, 1, - SF_ERASE_SECTOR | (start << 8))) != 0 || - (ret = flash_wait_op(adapter, 14, 500)) != 0) { - dev_err(adapter->pdev_dev, - "erase of flash sector %d failed, error %d\n", - start, ret); - break; - } - start++; - } - t4_write_reg(adapter, SF_OP, 0); /* unlock SF */ - return ret; -} - -/** - * t4_load_fw - download firmware - * @adap: the adapter - * @fw_data: the firmware image to write - * @size: image size - * - * Write the supplied firmware image to the card's serial flash. - */ -int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size) -{ - u32 csum; - int ret, addr; - unsigned int i; - u8 first_page[SF_PAGE_SIZE]; - const u32 *p = (const u32 *)fw_data; - const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data; - unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; - unsigned int fw_img_start = adap->params.sf_fw_start; - unsigned int fw_start_sec = fw_img_start / sf_sec_size; - - if (!size) { - dev_err(adap->pdev_dev, "FW image has no data\n"); - return -EINVAL; - } - if (size & 511) { - dev_err(adap->pdev_dev, - "FW image size not multiple of 512 bytes\n"); - return -EINVAL; - } - if (ntohs(hdr->len512) * 512 != size) { - dev_err(adap->pdev_dev, - "FW image size differs from size in FW header\n"); - return -EINVAL; - } - if (size > FW_MAX_SIZE) { - dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n", - FW_MAX_SIZE); - return -EFBIG; - } - - for (csum = 0, i = 0; i < size / sizeof(csum); i++) - csum += ntohl(p[i]); - - if (csum != 0xffffffff) { - dev_err(adap->pdev_dev, - "corrupted firmware image, checksum %#x\n", csum); - return -EINVAL; - } - - i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */ - ret = t4_flash_erase_sectors(adap, fw_start_sec, fw_start_sec + i - 1); - if (ret) - goto out; - - /* - * We write the correct version at the end so the driver can see a bad - * version if the FW write fails. Start by writing a copy of the - * first page with a bad version. - */ - memcpy(first_page, fw_data, SF_PAGE_SIZE); - ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff); - ret = t4_write_flash(adap, fw_img_start, SF_PAGE_SIZE, first_page); - if (ret) - goto out; - - addr = fw_img_start; - for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) { - addr += SF_PAGE_SIZE; - fw_data += SF_PAGE_SIZE; - ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data); - if (ret) - goto out; - } - - ret = t4_write_flash(adap, - fw_img_start + offsetof(struct fw_hdr, fw_ver), - sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver); -out: - if (ret) - dev_err(adap->pdev_dev, "firmware download failed, error %d\n", - ret); - return ret; -} - -#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ - FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_ANEG) - -/** - * t4_link_start - apply link configuration to MAC/PHY - * @phy: the PHY to setup - * @mac: the MAC to setup - * @lc: the requested link configuration - * - * Set up a port's MAC and PHY according to a desired link configuration. - * - If the PHY can auto-negotiate first decide what to advertise, then - * enable/disable auto-negotiation as desired, and reset. - * - If the PHY does not auto-negotiate just reset it. - * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC, - * otherwise do it later based on the outcome of auto-negotiation. - */ -int t4_link_start(struct adapter *adap, unsigned int mbox, unsigned int port, - struct link_config *lc) -{ - struct fw_port_cmd c; - unsigned int fc = 0, mdi = FW_PORT_MDI(FW_PORT_MDI_AUTO); - - lc->link_ok = 0; - if (lc->requested_fc & PAUSE_RX) - fc |= FW_PORT_CAP_FC_RX; - if (lc->requested_fc & PAUSE_TX) - fc |= FW_PORT_CAP_FC_TX; - - memset(&c, 0, sizeof(c)); - c.op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) | FW_CMD_REQUEST | - FW_CMD_EXEC | FW_PORT_CMD_PORTID(port)); - c.action_to_len16 = htonl(FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | - FW_LEN16(c)); - - if (!(lc->supported & FW_PORT_CAP_ANEG)) { - c.u.l1cfg.rcap = htonl((lc->supported & ADVERT_MASK) | fc); - lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); - } else if (lc->autoneg == AUTONEG_DISABLE) { - c.u.l1cfg.rcap = htonl(lc->requested_speed | fc | mdi); - lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); - } else - c.u.l1cfg.rcap = htonl(lc->advertising | fc | mdi); - - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_restart_aneg - restart autonegotiation - * @adap: the adapter - * @mbox: mbox to use for the FW command - * @port: the port id - * - * Restarts autonegotiation for the selected port. - */ -int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port) -{ - struct fw_port_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) | FW_CMD_REQUEST | - FW_CMD_EXEC | FW_PORT_CMD_PORTID(port)); - c.action_to_len16 = htonl(FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | - FW_LEN16(c)); - c.u.l1cfg.rcap = htonl(FW_PORT_CAP_ANEG); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -struct intr_info { - unsigned int mask; /* bits to check in interrupt status */ - const char *msg; /* message to print or NULL */ - short stat_idx; /* stat counter to increment or -1 */ - unsigned short fatal; /* whether the condition reported is fatal */ -}; - -/** - * t4_handle_intr_status - table driven interrupt handler - * @adapter: the adapter that generated the interrupt - * @reg: the interrupt status register to process - * @acts: table of interrupt actions - * - * A table driven interrupt handler that applies a set of masks to an - * interrupt status word and performs the corresponding actions if the - * interrupts described by the mask have occurred. The actions include - * optionally emitting a warning or alert message. The table is terminated - * by an entry specifying mask 0. Returns the number of fatal interrupt - * conditions. - */ -static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg, - const struct intr_info *acts) -{ - int fatal = 0; - unsigned int mask = 0; - unsigned int status = t4_read_reg(adapter, reg); - - for ( ; acts->mask; ++acts) { - if (!(status & acts->mask)) - continue; - if (acts->fatal) { - fatal++; - dev_alert(adapter->pdev_dev, "%s (0x%x)\n", acts->msg, - status & acts->mask); - } else if (acts->msg && printk_ratelimit()) - dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg, - status & acts->mask); - mask |= acts->mask; - } - status &= mask; - if (status) /* clear processed interrupts */ - t4_write_reg(adapter, reg, status); - return fatal; -} - -/* - * Interrupt handler for the PCIE module. - */ -static void pcie_intr_handler(struct adapter *adapter) -{ - static const struct intr_info sysbus_intr_info[] = { - { RNPP, "RXNP array parity error", -1, 1 }, - { RPCP, "RXPC array parity error", -1, 1 }, - { RCIP, "RXCIF array parity error", -1, 1 }, - { RCCP, "Rx completions control array parity error", -1, 1 }, - { RFTP, "RXFT array parity error", -1, 1 }, - { 0 } - }; - static const struct intr_info pcie_port_intr_info[] = { - { TPCP, "TXPC array parity error", -1, 1 }, - { TNPP, "TXNP array parity error", -1, 1 }, - { TFTP, "TXFT array parity error", -1, 1 }, - { TCAP, "TXCA array parity error", -1, 1 }, - { TCIP, "TXCIF array parity error", -1, 1 }, - { RCAP, "RXCA array parity error", -1, 1 }, - { OTDD, "outbound request TLP discarded", -1, 1 }, - { RDPE, "Rx data parity error", -1, 1 }, - { TDUE, "Tx uncorrectable data error", -1, 1 }, - { 0 } - }; - static const struct intr_info pcie_intr_info[] = { - { MSIADDRLPERR, "MSI AddrL parity error", -1, 1 }, - { MSIADDRHPERR, "MSI AddrH parity error", -1, 1 }, - { MSIDATAPERR, "MSI data parity error", -1, 1 }, - { MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 }, - { MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 }, - { MSIXDATAPERR, "MSI-X data parity error", -1, 1 }, - { MSIXDIPERR, "MSI-X DI parity error", -1, 1 }, - { PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 }, - { PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 }, - { TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 }, - { CCNTPERR, "PCI CMD channel count parity error", -1, 1 }, - { CREQPERR, "PCI CMD channel request parity error", -1, 1 }, - { CRSPPERR, "PCI CMD channel response parity error", -1, 1 }, - { DCNTPERR, "PCI DMA channel count parity error", -1, 1 }, - { DREQPERR, "PCI DMA channel request parity error", -1, 1 }, - { DRSPPERR, "PCI DMA channel response parity error", -1, 1 }, - { HCNTPERR, "PCI HMA channel count parity error", -1, 1 }, - { HREQPERR, "PCI HMA channel request parity error", -1, 1 }, - { HRSPPERR, "PCI HMA channel response parity error", -1, 1 }, - { CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 }, - { FIDPERR, "PCI FID parity error", -1, 1 }, - { INTXCLRPERR, "PCI INTx clear parity error", -1, 1 }, - { MATAGPERR, "PCI MA tag parity error", -1, 1 }, - { PIOTAGPERR, "PCI PIO tag parity error", -1, 1 }, - { RXCPLPERR, "PCI Rx completion parity error", -1, 1 }, - { RXWRPERR, "PCI Rx write parity error", -1, 1 }, - { RPLPERR, "PCI replay buffer parity error", -1, 1 }, - { PCIESINT, "PCI core secondary fault", -1, 1 }, - { PCIEPINT, "PCI core primary fault", -1, 1 }, - { UNXSPLCPLERR, "PCI unexpected split completion error", -1, 0 }, - { 0 } - }; - - int fat; - - fat = t4_handle_intr_status(adapter, - PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS, - sysbus_intr_info) + - t4_handle_intr_status(adapter, - PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS, - pcie_port_intr_info) + - t4_handle_intr_status(adapter, PCIE_INT_CAUSE, pcie_intr_info); - if (fat) - t4_fatal_err(adapter); -} - -/* - * TP interrupt handler. - */ -static void tp_intr_handler(struct adapter *adapter) -{ - static const struct intr_info tp_intr_info[] = { - { 0x3fffffff, "TP parity error", -1, 1 }, - { FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1 }, - { 0 } - }; - - if (t4_handle_intr_status(adapter, TP_INT_CAUSE, tp_intr_info)) - t4_fatal_err(adapter); -} - -/* - * SGE interrupt handler. - */ -static void sge_intr_handler(struct adapter *adapter) -{ - u64 v; - - static const struct intr_info sge_intr_info[] = { - { ERR_CPL_EXCEED_IQE_SIZE, - "SGE received CPL exceeding IQE size", -1, 1 }, - { ERR_INVALID_CIDX_INC, - "SGE GTS CIDX increment too large", -1, 0 }, - { ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 }, - { ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 }, - { ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0, - "SGE IQID > 1023 received CPL for FL", -1, 0 }, - { ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1, - 0 }, - { ERR_BAD_DB_PIDX2, "SGE DBP 2 pidx increment too large", -1, - 0 }, - { ERR_BAD_DB_PIDX1, "SGE DBP 1 pidx increment too large", -1, - 0 }, - { ERR_BAD_DB_PIDX0, "SGE DBP 0 pidx increment too large", -1, - 0 }, - { ERR_ING_CTXT_PRIO, - "SGE too many priority ingress contexts", -1, 0 }, - { ERR_EGR_CTXT_PRIO, - "SGE too many priority egress contexts", -1, 0 }, - { INGRESS_SIZE_ERR, "SGE illegal ingress QID", -1, 0 }, - { EGRESS_SIZE_ERR, "SGE illegal egress QID", -1, 0 }, - { 0 } - }; - - v = (u64)t4_read_reg(adapter, SGE_INT_CAUSE1) | - ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2) << 32); - if (v) { - dev_alert(adapter->pdev_dev, "SGE parity error (%#llx)\n", - (unsigned long long)v); - t4_write_reg(adapter, SGE_INT_CAUSE1, v); - t4_write_reg(adapter, SGE_INT_CAUSE2, v >> 32); - } - - if (t4_handle_intr_status(adapter, SGE_INT_CAUSE3, sge_intr_info) || - v != 0) - t4_fatal_err(adapter); -} - -/* - * CIM interrupt handler. - */ -static void cim_intr_handler(struct adapter *adapter) -{ - static const struct intr_info cim_intr_info[] = { - { PREFDROPINT, "CIM control register prefetch drop", -1, 1 }, - { OBQPARERR, "CIM OBQ parity error", -1, 1 }, - { IBQPARERR, "CIM IBQ parity error", -1, 1 }, - { MBUPPARERR, "CIM mailbox uP parity error", -1, 1 }, - { MBHOSTPARERR, "CIM mailbox host parity error", -1, 1 }, - { TIEQINPARERRINT, "CIM TIEQ outgoing parity error", -1, 1 }, - { TIEQOUTPARERRINT, "CIM TIEQ incoming parity error", -1, 1 }, - { 0 } - }; - static const struct intr_info cim_upintr_info[] = { - { RSVDSPACEINT, "CIM reserved space access", -1, 1 }, - { ILLTRANSINT, "CIM illegal transaction", -1, 1 }, - { ILLWRINT, "CIM illegal write", -1, 1 }, - { ILLRDINT, "CIM illegal read", -1, 1 }, - { ILLRDBEINT, "CIM illegal read BE", -1, 1 }, - { ILLWRBEINT, "CIM illegal write BE", -1, 1 }, - { SGLRDBOOTINT, "CIM single read from boot space", -1, 1 }, - { SGLWRBOOTINT, "CIM single write to boot space", -1, 1 }, - { BLKWRBOOTINT, "CIM block write to boot space", -1, 1 }, - { SGLRDFLASHINT, "CIM single read from flash space", -1, 1 }, - { SGLWRFLASHINT, "CIM single write to flash space", -1, 1 }, - { BLKWRFLASHINT, "CIM block write to flash space", -1, 1 }, - { SGLRDEEPROMINT, "CIM single EEPROM read", -1, 1 }, - { SGLWREEPROMINT, "CIM single EEPROM write", -1, 1 }, - { BLKRDEEPROMINT, "CIM block EEPROM read", -1, 1 }, - { BLKWREEPROMINT, "CIM block EEPROM write", -1, 1 }, - { SGLRDCTLINT , "CIM single read from CTL space", -1, 1 }, - { SGLWRCTLINT , "CIM single write to CTL space", -1, 1 }, - { BLKRDCTLINT , "CIM block read from CTL space", -1, 1 }, - { BLKWRCTLINT , "CIM block write to CTL space", -1, 1 }, - { SGLRDPLINT , "CIM single read from PL space", -1, 1 }, - { SGLWRPLINT , "CIM single write to PL space", -1, 1 }, - { BLKRDPLINT , "CIM block read from PL space", -1, 1 }, - { BLKWRPLINT , "CIM block write to PL space", -1, 1 }, - { REQOVRLOOKUPINT , "CIM request FIFO overwrite", -1, 1 }, - { RSPOVRLOOKUPINT , "CIM response FIFO overwrite", -1, 1 }, - { TIMEOUTINT , "CIM PIF timeout", -1, 1 }, - { TIMEOUTMAINT , "CIM PIF MA timeout", -1, 1 }, - { 0 } - }; - - int fat; - - fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE, - cim_intr_info) + - t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE, - cim_upintr_info); - if (fat) - t4_fatal_err(adapter); -} - -/* - * ULP RX interrupt handler. - */ -static void ulprx_intr_handler(struct adapter *adapter) -{ - static const struct intr_info ulprx_intr_info[] = { - { 0x1800000, "ULPRX context error", -1, 1 }, - { 0x7fffff, "ULPRX parity error", -1, 1 }, - { 0 } - }; - - if (t4_handle_intr_status(adapter, ULP_RX_INT_CAUSE, ulprx_intr_info)) - t4_fatal_err(adapter); -} - -/* - * ULP TX interrupt handler. - */ -static void ulptx_intr_handler(struct adapter *adapter) -{ - static const struct intr_info ulptx_intr_info[] = { - { PBL_BOUND_ERR_CH3, "ULPTX channel 3 PBL out of bounds", -1, - 0 }, - { PBL_BOUND_ERR_CH2, "ULPTX channel 2 PBL out of bounds", -1, - 0 }, - { PBL_BOUND_ERR_CH1, "ULPTX channel 1 PBL out of bounds", -1, - 0 }, - { PBL_BOUND_ERR_CH0, "ULPTX channel 0 PBL out of bounds", -1, - 0 }, - { 0xfffffff, "ULPTX parity error", -1, 1 }, - { 0 } - }; - - if (t4_handle_intr_status(adapter, ULP_TX_INT_CAUSE, ulptx_intr_info)) - t4_fatal_err(adapter); -} - -/* - * PM TX interrupt handler. - */ -static void pmtx_intr_handler(struct adapter *adapter) -{ - static const struct intr_info pmtx_intr_info[] = { - { PCMD_LEN_OVFL0, "PMTX channel 0 pcmd too large", -1, 1 }, - { PCMD_LEN_OVFL1, "PMTX channel 1 pcmd too large", -1, 1 }, - { PCMD_LEN_OVFL2, "PMTX channel 2 pcmd too large", -1, 1 }, - { ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1 }, - { PMTX_FRAMING_ERROR, "PMTX framing error", -1, 1 }, - { OESPI_PAR_ERROR, "PMTX oespi parity error", -1, 1 }, - { DB_OPTIONS_PAR_ERROR, "PMTX db_options parity error", -1, 1 }, - { ICSPI_PAR_ERROR, "PMTX icspi parity error", -1, 1 }, - { C_PCMD_PAR_ERROR, "PMTX c_pcmd parity error", -1, 1}, - { 0 } - }; - - if (t4_handle_intr_status(adapter, PM_TX_INT_CAUSE, pmtx_intr_info)) - t4_fatal_err(adapter); -} - -/* - * PM RX interrupt handler. - */ -static void pmrx_intr_handler(struct adapter *adapter) -{ - static const struct intr_info pmrx_intr_info[] = { - { ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1 }, - { PMRX_FRAMING_ERROR, "PMRX framing error", -1, 1 }, - { OCSPI_PAR_ERROR, "PMRX ocspi parity error", -1, 1 }, - { DB_OPTIONS_PAR_ERROR, "PMRX db_options parity error", -1, 1 }, - { IESPI_PAR_ERROR, "PMRX iespi parity error", -1, 1 }, - { E_PCMD_PAR_ERROR, "PMRX e_pcmd parity error", -1, 1}, - { 0 } - }; - - if (t4_handle_intr_status(adapter, PM_RX_INT_CAUSE, pmrx_intr_info)) - t4_fatal_err(adapter); -} - -/* - * CPL switch interrupt handler. - */ -static void cplsw_intr_handler(struct adapter *adapter) -{ - static const struct intr_info cplsw_intr_info[] = { - { CIM_OP_MAP_PERR, "CPLSW CIM op_map parity error", -1, 1 }, - { CIM_OVFL_ERROR, "CPLSW CIM overflow", -1, 1 }, - { TP_FRAMING_ERROR, "CPLSW TP framing error", -1, 1 }, - { SGE_FRAMING_ERROR, "CPLSW SGE framing error", -1, 1 }, - { CIM_FRAMING_ERROR, "CPLSW CIM framing error", -1, 1 }, - { ZERO_SWITCH_ERROR, "CPLSW no-switch error", -1, 1 }, - { 0 } - }; - - if (t4_handle_intr_status(adapter, CPL_INTR_CAUSE, cplsw_intr_info)) - t4_fatal_err(adapter); -} - -/* - * LE interrupt handler. - */ -static void le_intr_handler(struct adapter *adap) -{ - static const struct intr_info le_intr_info[] = { - { LIPMISS, "LE LIP miss", -1, 0 }, - { LIP0, "LE 0 LIP error", -1, 0 }, - { PARITYERR, "LE parity error", -1, 1 }, - { UNKNOWNCMD, "LE unknown command", -1, 1 }, - { REQQPARERR, "LE request queue parity error", -1, 1 }, - { 0 } - }; - - if (t4_handle_intr_status(adap, LE_DB_INT_CAUSE, le_intr_info)) - t4_fatal_err(adap); -} - -/* - * MPS interrupt handler. - */ -static void mps_intr_handler(struct adapter *adapter) -{ - static const struct intr_info mps_rx_intr_info[] = { - { 0xffffff, "MPS Rx parity error", -1, 1 }, - { 0 } - }; - static const struct intr_info mps_tx_intr_info[] = { - { TPFIFO, "MPS Tx TP FIFO parity error", -1, 1 }, - { NCSIFIFO, "MPS Tx NC-SI FIFO parity error", -1, 1 }, - { TXDATAFIFO, "MPS Tx data FIFO parity error", -1, 1 }, - { TXDESCFIFO, "MPS Tx desc FIFO parity error", -1, 1 }, - { BUBBLE, "MPS Tx underflow", -1, 1 }, - { SECNTERR, "MPS Tx SOP/EOP error", -1, 1 }, - { FRMERR, "MPS Tx framing error", -1, 1 }, - { 0 } - }; - static const struct intr_info mps_trc_intr_info[] = { - { FILTMEM, "MPS TRC filter parity error", -1, 1 }, - { PKTFIFO, "MPS TRC packet FIFO parity error", -1, 1 }, - { MISCPERR, "MPS TRC misc parity error", -1, 1 }, - { 0 } - }; - static const struct intr_info mps_stat_sram_intr_info[] = { - { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 }, - { 0 } - }; - static const struct intr_info mps_stat_tx_intr_info[] = { - { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 }, - { 0 } - }; - static const struct intr_info mps_stat_rx_intr_info[] = { - { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 }, - { 0 } - }; - static const struct intr_info mps_cls_intr_info[] = { - { MATCHSRAM, "MPS match SRAM parity error", -1, 1 }, - { MATCHTCAM, "MPS match TCAM parity error", -1, 1 }, - { HASHSRAM, "MPS hash SRAM parity error", -1, 1 }, - { 0 } - }; - - int fat; - - fat = t4_handle_intr_status(adapter, MPS_RX_PERR_INT_CAUSE, - mps_rx_intr_info) + - t4_handle_intr_status(adapter, MPS_TX_INT_CAUSE, - mps_tx_intr_info) + - t4_handle_intr_status(adapter, MPS_TRC_INT_CAUSE, - mps_trc_intr_info) + - t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_SRAM, - mps_stat_sram_intr_info) + - t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_TX_FIFO, - mps_stat_tx_intr_info) + - t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_RX_FIFO, - mps_stat_rx_intr_info) + - t4_handle_intr_status(adapter, MPS_CLS_INT_CAUSE, - mps_cls_intr_info); - - t4_write_reg(adapter, MPS_INT_CAUSE, CLSINT | TRCINT | - RXINT | TXINT | STATINT); - t4_read_reg(adapter, MPS_INT_CAUSE); /* flush */ - if (fat) - t4_fatal_err(adapter); -} - -#define MEM_INT_MASK (PERR_INT_CAUSE | ECC_CE_INT_CAUSE | ECC_UE_INT_CAUSE) - -/* - * EDC/MC interrupt handler. - */ -static void mem_intr_handler(struct adapter *adapter, int idx) -{ - static const char name[3][5] = { "EDC0", "EDC1", "MC" }; - - unsigned int addr, cnt_addr, v; - - if (idx <= MEM_EDC1) { - addr = EDC_REG(EDC_INT_CAUSE, idx); - cnt_addr = EDC_REG(EDC_ECC_STATUS, idx); - } else { - addr = MC_INT_CAUSE; - cnt_addr = MC_ECC_STATUS; - } - - v = t4_read_reg(adapter, addr) & MEM_INT_MASK; - if (v & PERR_INT_CAUSE) - dev_alert(adapter->pdev_dev, "%s FIFO parity error\n", - name[idx]); - if (v & ECC_CE_INT_CAUSE) { - u32 cnt = ECC_CECNT_GET(t4_read_reg(adapter, cnt_addr)); - - t4_write_reg(adapter, cnt_addr, ECC_CECNT_MASK); - if (printk_ratelimit()) - dev_warn(adapter->pdev_dev, - "%u %s correctable ECC data error%s\n", - cnt, name[idx], cnt > 1 ? "s" : ""); - } - if (v & ECC_UE_INT_CAUSE) - dev_alert(adapter->pdev_dev, - "%s uncorrectable ECC data error\n", name[idx]); - - t4_write_reg(adapter, addr, v); - if (v & (PERR_INT_CAUSE | ECC_UE_INT_CAUSE)) - t4_fatal_err(adapter); -} - -/* - * MA interrupt handler. - */ -static void ma_intr_handler(struct adapter *adap) -{ - u32 v, status = t4_read_reg(adap, MA_INT_CAUSE); - - if (status & MEM_PERR_INT_CAUSE) - dev_alert(adap->pdev_dev, - "MA parity error, parity status %#x\n", - t4_read_reg(adap, MA_PARITY_ERROR_STATUS)); - if (status & MEM_WRAP_INT_CAUSE) { - v = t4_read_reg(adap, MA_INT_WRAP_STATUS); - dev_alert(adap->pdev_dev, "MA address wrap-around error by " - "client %u to address %#x\n", - MEM_WRAP_CLIENT_NUM_GET(v), - MEM_WRAP_ADDRESS_GET(v) << 4); - } - t4_write_reg(adap, MA_INT_CAUSE, status); - t4_fatal_err(adap); -} - -/* - * SMB interrupt handler. - */ -static void smb_intr_handler(struct adapter *adap) -{ - static const struct intr_info smb_intr_info[] = { - { MSTTXFIFOPARINT, "SMB master Tx FIFO parity error", -1, 1 }, - { MSTRXFIFOPARINT, "SMB master Rx FIFO parity error", -1, 1 }, - { SLVFIFOPARINT, "SMB slave FIFO parity error", -1, 1 }, - { 0 } - }; - - if (t4_handle_intr_status(adap, SMB_INT_CAUSE, smb_intr_info)) - t4_fatal_err(adap); -} - -/* - * NC-SI interrupt handler. - */ -static void ncsi_intr_handler(struct adapter *adap) -{ - static const struct intr_info ncsi_intr_info[] = { - { CIM_DM_PRTY_ERR, "NC-SI CIM parity error", -1, 1 }, - { MPS_DM_PRTY_ERR, "NC-SI MPS parity error", -1, 1 }, - { TXFIFO_PRTY_ERR, "NC-SI Tx FIFO parity error", -1, 1 }, - { RXFIFO_PRTY_ERR, "NC-SI Rx FIFO parity error", -1, 1 }, - { 0 } - }; - - if (t4_handle_intr_status(adap, NCSI_INT_CAUSE, ncsi_intr_info)) - t4_fatal_err(adap); -} - -/* - * XGMAC interrupt handler. - */ -static void xgmac_intr_handler(struct adapter *adap, int port) -{ - u32 v = t4_read_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE)); - - v &= TXFIFO_PRTY_ERR | RXFIFO_PRTY_ERR; - if (!v) - return; - - if (v & TXFIFO_PRTY_ERR) - dev_alert(adap->pdev_dev, "XGMAC %d Tx FIFO parity error\n", - port); - if (v & RXFIFO_PRTY_ERR) - dev_alert(adap->pdev_dev, "XGMAC %d Rx FIFO parity error\n", - port); - t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE), v); - t4_fatal_err(adap); -} - -/* - * PL interrupt handler. - */ -static void pl_intr_handler(struct adapter *adap) -{ - static const struct intr_info pl_intr_info[] = { - { FATALPERR, "T4 fatal parity error", -1, 1 }, - { PERRVFID, "PL VFID_MAP parity error", -1, 1 }, - { 0 } - }; - - if (t4_handle_intr_status(adap, PL_PL_INT_CAUSE, pl_intr_info)) - t4_fatal_err(adap); -} - -#define PF_INTR_MASK (PFSW) -#define GLBL_INTR_MASK (CIM | MPS | PL | PCIE | MC | EDC0 | \ - EDC1 | LE | TP | MA | PM_TX | PM_RX | ULP_RX | \ - CPL_SWITCH | SGE | ULP_TX) - -/** - * t4_slow_intr_handler - control path interrupt handler - * @adapter: the adapter - * - * T4 interrupt handler for non-data global interrupt events, e.g., errors. - * The designation 'slow' is because it involves register reads, while - * data interrupts typically don't involve any MMIOs. - */ -int t4_slow_intr_handler(struct adapter *adapter) -{ - u32 cause = t4_read_reg(adapter, PL_INT_CAUSE); - - if (!(cause & GLBL_INTR_MASK)) - return 0; - if (cause & CIM) - cim_intr_handler(adapter); - if (cause & MPS) - mps_intr_handler(adapter); - if (cause & NCSI) - ncsi_intr_handler(adapter); - if (cause & PL) - pl_intr_handler(adapter); - if (cause & SMB) - smb_intr_handler(adapter); - if (cause & XGMAC0) - xgmac_intr_handler(adapter, 0); - if (cause & XGMAC1) - xgmac_intr_handler(adapter, 1); - if (cause & XGMAC_KR0) - xgmac_intr_handler(adapter, 2); - if (cause & XGMAC_KR1) - xgmac_intr_handler(adapter, 3); - if (cause & PCIE) - pcie_intr_handler(adapter); - if (cause & MC) - mem_intr_handler(adapter, MEM_MC); - if (cause & EDC0) - mem_intr_handler(adapter, MEM_EDC0); - if (cause & EDC1) - mem_intr_handler(adapter, MEM_EDC1); - if (cause & LE) - le_intr_handler(adapter); - if (cause & TP) - tp_intr_handler(adapter); - if (cause & MA) - ma_intr_handler(adapter); - if (cause & PM_TX) - pmtx_intr_handler(adapter); - if (cause & PM_RX) - pmrx_intr_handler(adapter); - if (cause & ULP_RX) - ulprx_intr_handler(adapter); - if (cause & CPL_SWITCH) - cplsw_intr_handler(adapter); - if (cause & SGE) - sge_intr_handler(adapter); - if (cause & ULP_TX) - ulptx_intr_handler(adapter); - - /* Clear the interrupts just processed for which we are the master. */ - t4_write_reg(adapter, PL_INT_CAUSE, cause & GLBL_INTR_MASK); - (void) t4_read_reg(adapter, PL_INT_CAUSE); /* flush */ - return 1; -} - -/** - * t4_intr_enable - enable interrupts - * @adapter: the adapter whose interrupts should be enabled - * - * Enable PF-specific interrupts for the calling function and the top-level - * interrupt concentrator for global interrupts. Interrupts are already - * enabled at each module, here we just enable the roots of the interrupt - * hierarchies. - * - * Note: this function should be called only when the driver manages - * non PF-specific interrupts from the various HW modules. Only one PCI - * function at a time should be doing this. - */ -void t4_intr_enable(struct adapter *adapter) -{ - u32 pf = SOURCEPF_GET(t4_read_reg(adapter, PL_WHOAMI)); - - t4_write_reg(adapter, SGE_INT_ENABLE3, ERR_CPL_EXCEED_IQE_SIZE | - ERR_INVALID_CIDX_INC | ERR_CPL_OPCODE_0 | - ERR_DROPPED_DB | ERR_DATA_CPL_ON_HIGH_QID1 | - ERR_DATA_CPL_ON_HIGH_QID0 | ERR_BAD_DB_PIDX3 | - ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 | - ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO | - ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR | - EGRESS_SIZE_ERR); - t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE), PF_INTR_MASK); - t4_set_reg_field(adapter, PL_INT_MAP0, 0, 1 << pf); -} - -/** - * t4_intr_disable - disable interrupts - * @adapter: the adapter whose interrupts should be disabled - * - * Disable interrupts. We only disable the top-level interrupt - * concentrators. The caller must be a PCI function managing global - * interrupts. - */ -void t4_intr_disable(struct adapter *adapter) -{ - u32 pf = SOURCEPF_GET(t4_read_reg(adapter, PL_WHOAMI)); - - t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE), 0); - t4_set_reg_field(adapter, PL_INT_MAP0, 1 << pf, 0); -} - -/** - * hash_mac_addr - return the hash value of a MAC address - * @addr: the 48-bit Ethernet MAC address - * - * Hashes a MAC address according to the hash function used by HW inexact - * (hash) address matching. - */ -static int hash_mac_addr(const u8 *addr) -{ - u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2]; - u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5]; - a ^= b; - a ^= (a >> 12); - a ^= (a >> 6); - return a & 0x3f; -} - -/** - * t4_config_rss_range - configure a portion of the RSS mapping table - * @adapter: the adapter - * @mbox: mbox to use for the FW command - * @viid: virtual interface whose RSS subtable is to be written - * @start: start entry in the table to write - * @n: how many table entries to write - * @rspq: values for the response queue lookup table - * @nrspq: number of values in @rspq - * - * Programs the selected part of the VI's RSS mapping table with the - * provided values. If @nrspq < @n the supplied values are used repeatedly - * until the full table range is populated. - * - * The caller must ensure the values in @rspq are in the range allowed for - * @viid. - */ -int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid, - int start, int n, const u16 *rspq, unsigned int nrspq) -{ - int ret; - const u16 *rsp = rspq; - const u16 *rsp_end = rspq + nrspq; - struct fw_rss_ind_tbl_cmd cmd; - - memset(&cmd, 0, sizeof(cmd)); - cmd.op_to_viid = htonl(FW_CMD_OP(FW_RSS_IND_TBL_CMD) | - FW_CMD_REQUEST | FW_CMD_WRITE | - FW_RSS_IND_TBL_CMD_VIID(viid)); - cmd.retval_len16 = htonl(FW_LEN16(cmd)); - - /* each fw_rss_ind_tbl_cmd takes up to 32 entries */ - while (n > 0) { - int nq = min(n, 32); - __be32 *qp = &cmd.iq0_to_iq2; - - cmd.niqid = htons(nq); - cmd.startidx = htons(start); - - start += nq; - n -= nq; - - while (nq > 0) { - unsigned int v; - - v = FW_RSS_IND_TBL_CMD_IQ0(*rsp); - if (++rsp >= rsp_end) - rsp = rspq; - v |= FW_RSS_IND_TBL_CMD_IQ1(*rsp); - if (++rsp >= rsp_end) - rsp = rspq; - v |= FW_RSS_IND_TBL_CMD_IQ2(*rsp); - if (++rsp >= rsp_end) - rsp = rspq; - - *qp++ = htonl(v); - nq -= 3; - } - - ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL); - if (ret) - return ret; - } - return 0; -} - -/** - * t4_config_glbl_rss - configure the global RSS mode - * @adapter: the adapter - * @mbox: mbox to use for the FW command - * @mode: global RSS mode - * @flags: mode-specific flags - * - * Sets the global RSS mode. - */ -int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode, - unsigned int flags) -{ - struct fw_rss_glb_config_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_write = htonl(FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) | - FW_CMD_REQUEST | FW_CMD_WRITE); - c.retval_len16 = htonl(FW_LEN16(c)); - if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) { - c.u.manual.mode_pkd = htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode)); - } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { - c.u.basicvirtual.mode_pkd = - htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode)); - c.u.basicvirtual.synmapen_to_hashtoeplitz = htonl(flags); - } else - return -EINVAL; - return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_tp_get_tcp_stats - read TP's TCP MIB counters - * @adap: the adapter - * @v4: holds the TCP/IP counter values - * @v6: holds the TCP/IPv6 counter values - * - * Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters. - * Either @v4 or @v6 may be %NULL to skip the corresponding stats. - */ -void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4, - struct tp_tcp_stats *v6) -{ - u32 val[TP_MIB_TCP_RXT_SEG_LO - TP_MIB_TCP_OUT_RST + 1]; - -#define STAT_IDX(x) ((TP_MIB_TCP_##x) - TP_MIB_TCP_OUT_RST) -#define STAT(x) val[STAT_IDX(x)] -#define STAT64(x) (((u64)STAT(x##_HI) << 32) | STAT(x##_LO)) - - if (v4) { - t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, val, - ARRAY_SIZE(val), TP_MIB_TCP_OUT_RST); - v4->tcpOutRsts = STAT(OUT_RST); - v4->tcpInSegs = STAT64(IN_SEG); - v4->tcpOutSegs = STAT64(OUT_SEG); - v4->tcpRetransSegs = STAT64(RXT_SEG); - } - if (v6) { - t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, val, - ARRAY_SIZE(val), TP_MIB_TCP_V6OUT_RST); - v6->tcpOutRsts = STAT(OUT_RST); - v6->tcpInSegs = STAT64(IN_SEG); - v6->tcpOutSegs = STAT64(OUT_SEG); - v6->tcpRetransSegs = STAT64(RXT_SEG); - } -#undef STAT64 -#undef STAT -#undef STAT_IDX -} - -/** - * t4_read_mtu_tbl - returns the values in the HW path MTU table - * @adap: the adapter - * @mtus: where to store the MTU values - * @mtu_log: where to store the MTU base-2 log (may be %NULL) - * - * Reads the HW path MTU table. - */ -void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log) -{ - u32 v; - int i; - - for (i = 0; i < NMTUS; ++i) { - t4_write_reg(adap, TP_MTU_TABLE, - MTUINDEX(0xff) | MTUVALUE(i)); - v = t4_read_reg(adap, TP_MTU_TABLE); - mtus[i] = MTUVALUE_GET(v); - if (mtu_log) - mtu_log[i] = MTUWIDTH_GET(v); - } -} - -/** - * init_cong_ctrl - initialize congestion control parameters - * @a: the alpha values for congestion control - * @b: the beta values for congestion control - * - * Initialize the congestion control parameters. - */ -static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b) -{ - a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1; - a[9] = 2; - a[10] = 3; - a[11] = 4; - a[12] = 5; - a[13] = 6; - a[14] = 7; - a[15] = 8; - a[16] = 9; - a[17] = 10; - a[18] = 14; - a[19] = 17; - a[20] = 21; - a[21] = 25; - a[22] = 30; - a[23] = 35; - a[24] = 45; - a[25] = 60; - a[26] = 80; - a[27] = 100; - a[28] = 200; - a[29] = 300; - a[30] = 400; - a[31] = 500; - - b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0; - b[9] = b[10] = 1; - b[11] = b[12] = 2; - b[13] = b[14] = b[15] = b[16] = 3; - b[17] = b[18] = b[19] = b[20] = b[21] = 4; - b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5; - b[28] = b[29] = 6; - b[30] = b[31] = 7; -} - -/* The minimum additive increment value for the congestion control table */ -#define CC_MIN_INCR 2U - -/** - * t4_load_mtus - write the MTU and congestion control HW tables - * @adap: the adapter - * @mtus: the values for the MTU table - * @alpha: the values for the congestion control alpha parameter - * @beta: the values for the congestion control beta parameter - * - * Write the HW MTU table with the supplied MTUs and the high-speed - * congestion control table with the supplied alpha, beta, and MTUs. - * We write the two tables together because the additive increments - * depend on the MTUs. - */ -void t4_load_mtus(struct adapter *adap, const unsigned short *mtus, - const unsigned short *alpha, const unsigned short *beta) -{ - static const unsigned int avg_pkts[NCCTRL_WIN] = { - 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640, - 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480, - 28672, 40960, 57344, 81920, 114688, 163840, 229376 - }; - - unsigned int i, w; - - for (i = 0; i < NMTUS; ++i) { - unsigned int mtu = mtus[i]; - unsigned int log2 = fls(mtu); - - if (!(mtu & ((1 << log2) >> 2))) /* round */ - log2--; - t4_write_reg(adap, TP_MTU_TABLE, MTUINDEX(i) | - MTUWIDTH(log2) | MTUVALUE(mtu)); - - for (w = 0; w < NCCTRL_WIN; ++w) { - unsigned int inc; - - inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w], - CC_MIN_INCR); - - t4_write_reg(adap, TP_CCTRL_TABLE, (i << 21) | - (w << 16) | (beta[w] << 13) | inc); - } - } -} - -/** - * get_mps_bg_map - return the buffer groups associated with a port - * @adap: the adapter - * @idx: the port index - * - * Returns a bitmap indicating which MPS buffer groups are associated - * with the given port. Bit i is set if buffer group i is used by the - * port. - */ -static unsigned int get_mps_bg_map(struct adapter *adap, int idx) -{ - u32 n = NUMPORTS_GET(t4_read_reg(adap, MPS_CMN_CTL)); - - if (n == 0) - return idx == 0 ? 0xf : 0; - if (n == 1) - return idx < 2 ? (3 << (2 * idx)) : 0; - return 1 << idx; -} - -/** - * t4_get_port_stats - collect port statistics - * @adap: the adapter - * @idx: the port index - * @p: the stats structure to fill - * - * Collect statistics related to the given port from HW. - */ -void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p) -{ - u32 bgmap = get_mps_bg_map(adap, idx); - -#define GET_STAT(name) \ - t4_read_reg64(adap, PORT_REG(idx, MPS_PORT_STAT_##name##_L)) -#define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L) - - p->tx_octets = GET_STAT(TX_PORT_BYTES); - p->tx_frames = GET_STAT(TX_PORT_FRAMES); - p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST); - p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST); - p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST); - p->tx_error_frames = GET_STAT(TX_PORT_ERROR); - p->tx_frames_64 = GET_STAT(TX_PORT_64B); - p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B); - p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B); - p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B); - p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B); - p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B); - p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX); - p->tx_drop = GET_STAT(TX_PORT_DROP); - p->tx_pause = GET_STAT(TX_PORT_PAUSE); - p->tx_ppp0 = GET_STAT(TX_PORT_PPP0); - p->tx_ppp1 = GET_STAT(TX_PORT_PPP1); - p->tx_ppp2 = GET_STAT(TX_PORT_PPP2); - p->tx_ppp3 = GET_STAT(TX_PORT_PPP3); - p->tx_ppp4 = GET_STAT(TX_PORT_PPP4); - p->tx_ppp5 = GET_STAT(TX_PORT_PPP5); - p->tx_ppp6 = GET_STAT(TX_PORT_PPP6); - p->tx_ppp7 = GET_STAT(TX_PORT_PPP7); - - p->rx_octets = GET_STAT(RX_PORT_BYTES); - p->rx_frames = GET_STAT(RX_PORT_FRAMES); - p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST); - p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST); - p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST); - p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR); - p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR); - p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR); - p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR); - p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR); - p->rx_runt = GET_STAT(RX_PORT_LESS_64B); - p->rx_frames_64 = GET_STAT(RX_PORT_64B); - p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B); - p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B); - p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B); - p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B); - p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B); - p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX); - p->rx_pause = GET_STAT(RX_PORT_PAUSE); - p->rx_ppp0 = GET_STAT(RX_PORT_PPP0); - p->rx_ppp1 = GET_STAT(RX_PORT_PPP1); - p->rx_ppp2 = GET_STAT(RX_PORT_PPP2); - p->rx_ppp3 = GET_STAT(RX_PORT_PPP3); - p->rx_ppp4 = GET_STAT(RX_PORT_PPP4); - p->rx_ppp5 = GET_STAT(RX_PORT_PPP5); - p->rx_ppp6 = GET_STAT(RX_PORT_PPP6); - p->rx_ppp7 = GET_STAT(RX_PORT_PPP7); - - p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0; - p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0; - p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0; - p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0; - p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0; - p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0; - p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0; - p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0; - -#undef GET_STAT -#undef GET_STAT_COM -} - -/** - * t4_wol_magic_enable - enable/disable magic packet WoL - * @adap: the adapter - * @port: the physical port index - * @addr: MAC address expected in magic packets, %NULL to disable - * - * Enables/disables magic packet wake-on-LAN for the selected port. - */ -void t4_wol_magic_enable(struct adapter *adap, unsigned int port, - const u8 *addr) -{ - if (addr) { - t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_MAGIC_MACID_LO), - (addr[2] << 24) | (addr[3] << 16) | - (addr[4] << 8) | addr[5]); - t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_MAGIC_MACID_HI), - (addr[0] << 8) | addr[1]); - } - t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2), MAGICEN, - addr ? MAGICEN : 0); -} - -/** - * t4_wol_pat_enable - enable/disable pattern-based WoL - * @adap: the adapter - * @port: the physical port index - * @map: bitmap of which HW pattern filters to set - * @mask0: byte mask for bytes 0-63 of a packet - * @mask1: byte mask for bytes 64-127 of a packet - * @crc: Ethernet CRC for selected bytes - * @enable: enable/disable switch - * - * Sets the pattern filters indicated in @map to mask out the bytes - * specified in @mask0/@mask1 in received packets and compare the CRC of - * the resulting packet against @crc. If @enable is %true pattern-based - * WoL is enabled, otherwise disabled. - */ -int t4_wol_pat_enable(struct adapter *adap, unsigned int port, unsigned int map, - u64 mask0, u64 mask1, unsigned int crc, bool enable) -{ - int i; - - if (!enable) { - t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2), - PATEN, 0); - return 0; - } - if (map > 0xff) - return -EINVAL; - -#define EPIO_REG(name) PORT_REG(port, XGMAC_PORT_EPIO_##name) - - t4_write_reg(adap, EPIO_REG(DATA1), mask0 >> 32); - t4_write_reg(adap, EPIO_REG(DATA2), mask1); - t4_write_reg(adap, EPIO_REG(DATA3), mask1 >> 32); - - for (i = 0; i < NWOL_PAT; i++, map >>= 1) { - if (!(map & 1)) - continue; - - /* write byte masks */ - t4_write_reg(adap, EPIO_REG(DATA0), mask0); - t4_write_reg(adap, EPIO_REG(OP), ADDRESS(i) | EPIOWR); - t4_read_reg(adap, EPIO_REG(OP)); /* flush */ - if (t4_read_reg(adap, EPIO_REG(OP)) & BUSY) - return -ETIMEDOUT; - - /* write CRC */ - t4_write_reg(adap, EPIO_REG(DATA0), crc); - t4_write_reg(adap, EPIO_REG(OP), ADDRESS(i + 32) | EPIOWR); - t4_read_reg(adap, EPIO_REG(OP)); /* flush */ - if (t4_read_reg(adap, EPIO_REG(OP)) & BUSY) - return -ETIMEDOUT; - } -#undef EPIO_REG - - t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2), 0, PATEN); - return 0; -} - -#define INIT_CMD(var, cmd, rd_wr) do { \ - (var).op_to_write = htonl(FW_CMD_OP(FW_##cmd##_CMD) | \ - FW_CMD_REQUEST | FW_CMD_##rd_wr); \ - (var).retval_len16 = htonl(FW_LEN16(var)); \ -} while (0) - -/** - * t4_mdio_rd - read a PHY register through MDIO - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @phy_addr: the PHY address - * @mmd: the PHY MMD to access (0 for clause 22 PHYs) - * @reg: the register to read - * @valp: where to store the value - * - * Issues a FW command through the given mailbox to read a PHY register. - */ -int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, - unsigned int mmd, unsigned int reg, u16 *valp) -{ - int ret; - struct fw_ldst_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST | - FW_CMD_READ | FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO)); - c.cycles_to_len16 = htonl(FW_LEN16(c)); - c.u.mdio.paddr_mmd = htons(FW_LDST_CMD_PADDR(phy_addr) | - FW_LDST_CMD_MMD(mmd)); - c.u.mdio.raddr = htons(reg); - - ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); - if (ret == 0) - *valp = ntohs(c.u.mdio.rval); - return ret; -} - -/** - * t4_mdio_wr - write a PHY register through MDIO - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @phy_addr: the PHY address - * @mmd: the PHY MMD to access (0 for clause 22 PHYs) - * @reg: the register to write - * @valp: value to write - * - * Issues a FW command through the given mailbox to write a PHY register. - */ -int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, - unsigned int mmd, unsigned int reg, u16 val) -{ - struct fw_ldst_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST | - FW_CMD_WRITE | FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO)); - c.cycles_to_len16 = htonl(FW_LEN16(c)); - c.u.mdio.paddr_mmd = htons(FW_LDST_CMD_PADDR(phy_addr) | - FW_LDST_CMD_MMD(mmd)); - c.u.mdio.raddr = htons(reg); - c.u.mdio.rval = htons(val); - - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_fw_hello - establish communication with FW - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @evt_mbox: mailbox to receive async FW events - * @master: specifies the caller's willingness to be the device master - * @state: returns the current device state - * - * Issues a command to establish communication with FW. - */ -int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, - enum dev_master master, enum dev_state *state) -{ - int ret; - struct fw_hello_cmd c; - - INIT_CMD(c, HELLO, WRITE); - c.err_to_mbasyncnot = htonl( - FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) | - FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) | - FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : 0xff) | - FW_HELLO_CMD_MBASYNCNOT(evt_mbox)); - - ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); - if (ret == 0 && state) { - u32 v = ntohl(c.err_to_mbasyncnot); - if (v & FW_HELLO_CMD_INIT) - *state = DEV_STATE_INIT; - else if (v & FW_HELLO_CMD_ERR) - *state = DEV_STATE_ERR; - else - *state = DEV_STATE_UNINIT; - } - return ret; -} - -/** - * t4_fw_bye - end communication with FW - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * - * Issues a command to terminate communication with FW. - */ -int t4_fw_bye(struct adapter *adap, unsigned int mbox) -{ - struct fw_bye_cmd c; - - INIT_CMD(c, BYE, WRITE); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_init_cmd - ask FW to initialize the device - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * - * Issues a command to FW to partially initialize the device. This - * performs initialization that generally doesn't depend on user input. - */ -int t4_early_init(struct adapter *adap, unsigned int mbox) -{ - struct fw_initialize_cmd c; - - INIT_CMD(c, INITIALIZE, WRITE); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_fw_reset - issue a reset to FW - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @reset: specifies the type of reset to perform - * - * Issues a reset command of the specified type to FW. - */ -int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) -{ - struct fw_reset_cmd c; - - INIT_CMD(c, RESET, WRITE); - c.val = htonl(reset); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_query_params - query FW or device parameters - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @pf: the PF - * @vf: the VF - * @nparams: the number of parameters - * @params: the parameter names - * @val: the parameter values - * - * Reads the value of FW or device parameters. Up to 7 parameters can be - * queried at once. - */ -int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, - unsigned int vf, unsigned int nparams, const u32 *params, - u32 *val) -{ - int i, ret; - struct fw_params_cmd c; - __be32 *p = &c.param[0].mnem; - - if (nparams > 7) - return -EINVAL; - - memset(&c, 0, sizeof(c)); - c.op_to_vfn = htonl(FW_CMD_OP(FW_PARAMS_CMD) | FW_CMD_REQUEST | - FW_CMD_READ | FW_PARAMS_CMD_PFN(pf) | - FW_PARAMS_CMD_VFN(vf)); - c.retval_len16 = htonl(FW_LEN16(c)); - for (i = 0; i < nparams; i++, p += 2) - *p = htonl(*params++); - - ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); - if (ret == 0) - for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2) - *val++ = ntohl(*p); - return ret; -} - -/** - * t4_set_params - sets FW or device parameters - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @pf: the PF - * @vf: the VF - * @nparams: the number of parameters - * @params: the parameter names - * @val: the parameter values - * - * Sets the value of FW or device parameters. Up to 7 parameters can be - * specified at once. - */ -int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf, - unsigned int vf, unsigned int nparams, const u32 *params, - const u32 *val) -{ - struct fw_params_cmd c; - __be32 *p = &c.param[0].mnem; - - if (nparams > 7) - return -EINVAL; - - memset(&c, 0, sizeof(c)); - c.op_to_vfn = htonl(FW_CMD_OP(FW_PARAMS_CMD) | FW_CMD_REQUEST | - FW_CMD_WRITE | FW_PARAMS_CMD_PFN(pf) | - FW_PARAMS_CMD_VFN(vf)); - c.retval_len16 = htonl(FW_LEN16(c)); - while (nparams--) { - *p++ = htonl(*params++); - *p++ = htonl(*val++); - } - - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_cfg_pfvf - configure PF/VF resource limits - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @pf: the PF being configured - * @vf: the VF being configured - * @txq: the max number of egress queues - * @txq_eth_ctrl: the max number of egress Ethernet or control queues - * @rxqi: the max number of interrupt-capable ingress queues - * @rxq: the max number of interruptless ingress queues - * @tc: the PCI traffic class - * @vi: the max number of virtual interfaces - * @cmask: the channel access rights mask for the PF/VF - * @pmask: the port access rights mask for the PF/VF - * @nexact: the maximum number of exact MPS filters - * @rcaps: read capabilities - * @wxcaps: write/execute capabilities - * - * Configures resource limits and capabilities for a physical or virtual - * function. - */ -int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf, - unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl, - unsigned int rxqi, unsigned int rxq, unsigned int tc, - unsigned int vi, unsigned int cmask, unsigned int pmask, - unsigned int nexact, unsigned int rcaps, unsigned int wxcaps) -{ - struct fw_pfvf_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_vfn = htonl(FW_CMD_OP(FW_PFVF_CMD) | FW_CMD_REQUEST | - FW_CMD_WRITE | FW_PFVF_CMD_PFN(pf) | - FW_PFVF_CMD_VFN(vf)); - c.retval_len16 = htonl(FW_LEN16(c)); - c.niqflint_niq = htonl(FW_PFVF_CMD_NIQFLINT(rxqi) | - FW_PFVF_CMD_NIQ(rxq)); - c.type_to_neq = htonl(FW_PFVF_CMD_CMASK(cmask) | - FW_PFVF_CMD_PMASK(pmask) | - FW_PFVF_CMD_NEQ(txq)); - c.tc_to_nexactf = htonl(FW_PFVF_CMD_TC(tc) | FW_PFVF_CMD_NVI(vi) | - FW_PFVF_CMD_NEXACTF(nexact)); - c.r_caps_to_nethctrl = htonl(FW_PFVF_CMD_R_CAPS(rcaps) | - FW_PFVF_CMD_WX_CAPS(wxcaps) | - FW_PFVF_CMD_NETHCTRL(txq_eth_ctrl)); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_alloc_vi - allocate a virtual interface - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @port: physical port associated with the VI - * @pf: the PF owning the VI - * @vf: the VF owning the VI - * @nmac: number of MAC addresses needed (1 to 5) - * @mac: the MAC addresses of the VI - * @rss_size: size of RSS table slice associated with this VI - * - * Allocates a virtual interface for the given physical port. If @mac is - * not %NULL it contains the MAC addresses of the VI as assigned by FW. - * @mac should be large enough to hold @nmac Ethernet addresses, they are - * stored consecutively so the space needed is @nmac * 6 bytes. - * Returns a negative error number or the non-negative VI id. - */ -int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port, - unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac, - unsigned int *rss_size) -{ - int ret; - struct fw_vi_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_vfn = htonl(FW_CMD_OP(FW_VI_CMD) | FW_CMD_REQUEST | - FW_CMD_WRITE | FW_CMD_EXEC | - FW_VI_CMD_PFN(pf) | FW_VI_CMD_VFN(vf)); - c.alloc_to_len16 = htonl(FW_VI_CMD_ALLOC | FW_LEN16(c)); - c.portid_pkd = FW_VI_CMD_PORTID(port); - c.nmac = nmac - 1; - - ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); - if (ret) - return ret; - - if (mac) { - memcpy(mac, c.mac, sizeof(c.mac)); - switch (nmac) { - case 5: - memcpy(mac + 24, c.nmac3, sizeof(c.nmac3)); - case 4: - memcpy(mac + 18, c.nmac2, sizeof(c.nmac2)); - case 3: - memcpy(mac + 12, c.nmac1, sizeof(c.nmac1)); - case 2: - memcpy(mac + 6, c.nmac0, sizeof(c.nmac0)); - } - } - if (rss_size) - *rss_size = FW_VI_CMD_RSSSIZE_GET(ntohs(c.rsssize_pkd)); - return FW_VI_CMD_VIID_GET(ntohs(c.type_viid)); -} - -/** - * t4_set_rxmode - set Rx properties of a virtual interface - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @viid: the VI id - * @mtu: the new MTU or -1 - * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change - * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change - * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change - * @vlanex: 1 to enable HW VLAN extraction, 0 to disable it, -1 no change - * @sleep_ok: if true we may sleep while awaiting command completion - * - * Sets Rx properties of a virtual interface. - */ -int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid, - int mtu, int promisc, int all_multi, int bcast, int vlanex, - bool sleep_ok) -{ - struct fw_vi_rxmode_cmd c; - - /* convert to FW values */ - if (mtu < 0) - mtu = FW_RXMODE_MTU_NO_CHG; - if (promisc < 0) - promisc = FW_VI_RXMODE_CMD_PROMISCEN_MASK; - if (all_multi < 0) - all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_MASK; - if (bcast < 0) - bcast = FW_VI_RXMODE_CMD_BROADCASTEN_MASK; - if (vlanex < 0) - vlanex = FW_VI_RXMODE_CMD_VLANEXEN_MASK; - - memset(&c, 0, sizeof(c)); - c.op_to_viid = htonl(FW_CMD_OP(FW_VI_RXMODE_CMD) | FW_CMD_REQUEST | - FW_CMD_WRITE | FW_VI_RXMODE_CMD_VIID(viid)); - c.retval_len16 = htonl(FW_LEN16(c)); - c.mtu_to_vlanexen = htonl(FW_VI_RXMODE_CMD_MTU(mtu) | - FW_VI_RXMODE_CMD_PROMISCEN(promisc) | - FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) | - FW_VI_RXMODE_CMD_BROADCASTEN(bcast) | - FW_VI_RXMODE_CMD_VLANEXEN(vlanex)); - return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); -} - -/** - * t4_alloc_mac_filt - allocates exact-match filters for MAC addresses - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @viid: the VI id - * @free: if true any existing filters for this VI id are first removed - * @naddr: the number of MAC addresses to allocate filters for (up to 7) - * @addr: the MAC address(es) - * @idx: where to store the index of each allocated filter - * @hash: pointer to hash address filter bitmap - * @sleep_ok: call is allowed to sleep - * - * Allocates an exact-match filter for each of the supplied addresses and - * sets it to the corresponding address. If @idx is not %NULL it should - * have at least @naddr entries, each of which will be set to the index of - * the filter allocated for the corresponding MAC address. If a filter - * could not be allocated for an address its index is set to 0xffff. - * If @hash is not %NULL addresses that fail to allocate an exact filter - * are hashed and update the hash filter bitmap pointed at by @hash. - * - * Returns a negative error number or the number of filters allocated. - */ -int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox, - unsigned int viid, bool free, unsigned int naddr, - const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok) -{ - int i, ret; - struct fw_vi_mac_cmd c; - struct fw_vi_mac_exact *p; - - if (naddr > 7) - return -EINVAL; - - memset(&c, 0, sizeof(c)); - c.op_to_viid = htonl(FW_CMD_OP(FW_VI_MAC_CMD) | FW_CMD_REQUEST | - FW_CMD_WRITE | (free ? FW_CMD_EXEC : 0) | - FW_VI_MAC_CMD_VIID(viid)); - c.freemacs_to_len16 = htonl(FW_VI_MAC_CMD_FREEMACS(free) | - FW_CMD_LEN16((naddr + 2) / 2)); - - for (i = 0, p = c.u.exact; i < naddr; i++, p++) { - p->valid_to_idx = htons(FW_VI_MAC_CMD_VALID | - FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC)); - memcpy(p->macaddr, addr[i], sizeof(p->macaddr)); - } - - ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok); - if (ret) - return ret; - - for (i = 0, p = c.u.exact; i < naddr; i++, p++) { - u16 index = FW_VI_MAC_CMD_IDX_GET(ntohs(p->valid_to_idx)); - - if (idx) - idx[i] = index >= NEXACT_MAC ? 0xffff : index; - if (index < NEXACT_MAC) - ret++; - else if (hash) - *hash |= (1ULL << hash_mac_addr(addr[i])); - } - return ret; -} - -/** - * t4_change_mac - modifies the exact-match filter for a MAC address - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @viid: the VI id - * @idx: index of existing filter for old value of MAC address, or -1 - * @addr: the new MAC address value - * @persist: whether a new MAC allocation should be persistent - * @add_smt: if true also add the address to the HW SMT - * - * Modifies an exact-match filter and sets it to the new MAC address. - * Note that in general it is not possible to modify the value of a given - * filter so the generic way to modify an address filter is to free the one - * being used by the old address value and allocate a new filter for the - * new address value. @idx can be -1 if the address is a new addition. - * - * Returns a negative error number or the index of the filter with the new - * MAC value. - */ -int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid, - int idx, const u8 *addr, bool persist, bool add_smt) -{ - int ret, mode; - struct fw_vi_mac_cmd c; - struct fw_vi_mac_exact *p = c.u.exact; - - if (idx < 0) /* new allocation */ - idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC; - mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY; - - memset(&c, 0, sizeof(c)); - c.op_to_viid = htonl(FW_CMD_OP(FW_VI_MAC_CMD) | FW_CMD_REQUEST | - FW_CMD_WRITE | FW_VI_MAC_CMD_VIID(viid)); - c.freemacs_to_len16 = htonl(FW_CMD_LEN16(1)); - p->valid_to_idx = htons(FW_VI_MAC_CMD_VALID | - FW_VI_MAC_CMD_SMAC_RESULT(mode) | - FW_VI_MAC_CMD_IDX(idx)); - memcpy(p->macaddr, addr, sizeof(p->macaddr)); - - ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); - if (ret == 0) { - ret = FW_VI_MAC_CMD_IDX_GET(ntohs(p->valid_to_idx)); - if (ret >= NEXACT_MAC) - ret = -ENOMEM; - } - return ret; -} - -/** - * t4_set_addr_hash - program the MAC inexact-match hash filter - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @viid: the VI id - * @ucast: whether the hash filter should also match unicast addresses - * @vec: the value to be written to the hash filter - * @sleep_ok: call is allowed to sleep - * - * Sets the 64-bit inexact-match hash filter for a virtual interface. - */ -int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid, - bool ucast, u64 vec, bool sleep_ok) -{ - struct fw_vi_mac_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_viid = htonl(FW_CMD_OP(FW_VI_MAC_CMD) | FW_CMD_REQUEST | - FW_CMD_WRITE | FW_VI_ENABLE_CMD_VIID(viid)); - c.freemacs_to_len16 = htonl(FW_VI_MAC_CMD_HASHVECEN | - FW_VI_MAC_CMD_HASHUNIEN(ucast) | - FW_CMD_LEN16(1)); - c.u.hash.hashvec = cpu_to_be64(vec); - return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); -} - -/** - * t4_enable_vi - enable/disable a virtual interface - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @viid: the VI id - * @rx_en: 1=enable Rx, 0=disable Rx - * @tx_en: 1=enable Tx, 0=disable Tx - * - * Enables/disables a virtual interface. - */ -int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid, - bool rx_en, bool tx_en) -{ - struct fw_vi_enable_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST | - FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid)); - c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_IEN(rx_en) | - FW_VI_ENABLE_CMD_EEN(tx_en) | FW_LEN16(c)); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_identify_port - identify a VI's port by blinking its LED - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @viid: the VI id - * @nblinks: how many times to blink LED at 2.5 Hz - * - * Identifies a VI's port by blinking its LED. - */ -int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid, - unsigned int nblinks) -{ - struct fw_vi_enable_cmd c; - - c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST | - FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid)); - c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_LED | FW_LEN16(c)); - c.blinkdur = htons(nblinks); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_iq_free - free an ingress queue and its FLs - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @pf: the PF owning the queues - * @vf: the VF owning the queues - * @iqtype: the ingress queue type - * @iqid: ingress queue id - * @fl0id: FL0 queue id or 0xffff if no attached FL0 - * @fl1id: FL1 queue id or 0xffff if no attached FL1 - * - * Frees an ingress queue and its associated FLs, if any. - */ -int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, - unsigned int vf, unsigned int iqtype, unsigned int iqid, - unsigned int fl0id, unsigned int fl1id) -{ - struct fw_iq_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_vfn = htonl(FW_CMD_OP(FW_IQ_CMD) | FW_CMD_REQUEST | - FW_CMD_EXEC | FW_IQ_CMD_PFN(pf) | - FW_IQ_CMD_VFN(vf)); - c.alloc_to_len16 = htonl(FW_IQ_CMD_FREE | FW_LEN16(c)); - c.type_to_iqandstindex = htonl(FW_IQ_CMD_TYPE(iqtype)); - c.iqid = htons(iqid); - c.fl0id = htons(fl0id); - c.fl1id = htons(fl1id); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_eth_eq_free - free an Ethernet egress queue - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @pf: the PF owning the queue - * @vf: the VF owning the queue - * @eqid: egress queue id - * - * Frees an Ethernet egress queue. - */ -int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, - unsigned int vf, unsigned int eqid) -{ - struct fw_eq_eth_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_ETH_CMD) | FW_CMD_REQUEST | - FW_CMD_EXEC | FW_EQ_ETH_CMD_PFN(pf) | - FW_EQ_ETH_CMD_VFN(vf)); - c.alloc_to_len16 = htonl(FW_EQ_ETH_CMD_FREE | FW_LEN16(c)); - c.eqid_pkd = htonl(FW_EQ_ETH_CMD_EQID(eqid)); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_ctrl_eq_free - free a control egress queue - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @pf: the PF owning the queue - * @vf: the VF owning the queue - * @eqid: egress queue id - * - * Frees a control egress queue. - */ -int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, - unsigned int vf, unsigned int eqid) -{ - struct fw_eq_ctrl_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_CTRL_CMD) | FW_CMD_REQUEST | - FW_CMD_EXEC | FW_EQ_CTRL_CMD_PFN(pf) | - FW_EQ_CTRL_CMD_VFN(vf)); - c.alloc_to_len16 = htonl(FW_EQ_CTRL_CMD_FREE | FW_LEN16(c)); - c.cmpliqid_eqid = htonl(FW_EQ_CTRL_CMD_EQID(eqid)); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_ofld_eq_free - free an offload egress queue - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @pf: the PF owning the queue - * @vf: the VF owning the queue - * @eqid: egress queue id - * - * Frees a control egress queue. - */ -int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, - unsigned int vf, unsigned int eqid) -{ - struct fw_eq_ofld_cmd c; - - memset(&c, 0, sizeof(c)); - c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_OFLD_CMD) | FW_CMD_REQUEST | - FW_CMD_EXEC | FW_EQ_OFLD_CMD_PFN(pf) | - FW_EQ_OFLD_CMD_VFN(vf)); - c.alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_FREE | FW_LEN16(c)); - c.eqid_pkd = htonl(FW_EQ_OFLD_CMD_EQID(eqid)); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); -} - -/** - * t4_handle_fw_rpl - process a FW reply message - * @adap: the adapter - * @rpl: start of the FW message - * - * Processes a FW message, such as link state change messages. - */ -int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl) -{ - u8 opcode = *(const u8 *)rpl; - - if (opcode == FW_PORT_CMD) { /* link/module state change message */ - int speed = 0, fc = 0; - const struct fw_port_cmd *p = (void *)rpl; - int chan = FW_PORT_CMD_PORTID_GET(ntohl(p->op_to_portid)); - int port = adap->chan_map[chan]; - struct port_info *pi = adap2pinfo(adap, port); - struct link_config *lc = &pi->link_cfg; - u32 stat = ntohl(p->u.info.lstatus_to_modtype); - int link_ok = (stat & FW_PORT_CMD_LSTATUS) != 0; - u32 mod = FW_PORT_CMD_MODTYPE_GET(stat); - - if (stat & FW_PORT_CMD_RXPAUSE) - fc |= PAUSE_RX; - if (stat & FW_PORT_CMD_TXPAUSE) - fc |= PAUSE_TX; - if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M)) - speed = SPEED_100; - else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G)) - speed = SPEED_1000; - else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G)) - speed = SPEED_10000; - - if (link_ok != lc->link_ok || speed != lc->speed || - fc != lc->fc) { /* something changed */ - lc->link_ok = link_ok; - lc->speed = speed; - lc->fc = fc; - t4_os_link_changed(adap, port, link_ok); - } - if (mod != pi->mod_type) { - pi->mod_type = mod; - t4_os_portmod_changed(adap, port); - } - } - return 0; -} - -static void __devinit get_pci_mode(struct adapter *adapter, - struct pci_params *p) -{ - u16 val; - u32 pcie_cap = pci_pcie_cap(adapter->pdev); - - if (pcie_cap) { - pci_read_config_word(adapter->pdev, pcie_cap + PCI_EXP_LNKSTA, - &val); - p->speed = val & PCI_EXP_LNKSTA_CLS; - p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4; - } -} - -/** - * init_link_config - initialize a link's SW state - * @lc: structure holding the link state - * @caps: link capabilities - * - * Initializes the SW state maintained for each link, including the link's - * capabilities and default speed/flow-control/autonegotiation settings. - */ -static void __devinit init_link_config(struct link_config *lc, - unsigned int caps) -{ - lc->supported = caps; - lc->requested_speed = 0; - lc->speed = 0; - lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; - if (lc->supported & FW_PORT_CAP_ANEG) { - lc->advertising = lc->supported & ADVERT_MASK; - lc->autoneg = AUTONEG_ENABLE; - lc->requested_fc |= PAUSE_AUTONEG; - } else { - lc->advertising = 0; - lc->autoneg = AUTONEG_DISABLE; - } -} - -int t4_wait_dev_ready(struct adapter *adap) -{ - if (t4_read_reg(adap, PL_WHOAMI) != 0xffffffff) - return 0; - msleep(500); - return t4_read_reg(adap, PL_WHOAMI) != 0xffffffff ? 0 : -EIO; -} - -static int __devinit get_flash_params(struct adapter *adap) -{ - int ret; - u32 info; - - ret = sf1_write(adap, 1, 1, 0, SF_RD_ID); - if (!ret) - ret = sf1_read(adap, 3, 0, 1, &info); - t4_write_reg(adap, SF_OP, 0); /* unlock SF */ - if (ret) - return ret; - - if ((info & 0xff) != 0x20) /* not a Numonix flash */ - return -EINVAL; - info >>= 16; /* log2 of size */ - if (info >= 0x14 && info < 0x18) - adap->params.sf_nsec = 1 << (info - 16); - else if (info == 0x18) - adap->params.sf_nsec = 64; - else - return -EINVAL; - adap->params.sf_size = 1 << info; - adap->params.sf_fw_start = - t4_read_reg(adap, CIM_BOOT_CFG) & BOOTADDR_MASK; - return 0; -} - -/** - * t4_prep_adapter - prepare SW and HW for operation - * @adapter: the adapter - * @reset: if true perform a HW reset - * - * Initialize adapter SW state for the various HW modules, set initial - * values for some adapter tunables, take PHYs out of reset, and - * initialize the MDIO interface. - */ -int __devinit t4_prep_adapter(struct adapter *adapter) -{ - int ret; - - ret = t4_wait_dev_ready(adapter); - if (ret < 0) - return ret; - - get_pci_mode(adapter, &adapter->params.pci); - adapter->params.rev = t4_read_reg(adapter, PL_REV); - - ret = get_flash_params(adapter); - if (ret < 0) { - dev_err(adapter->pdev_dev, "error %d identifying flash\n", ret); - return ret; - } - - ret = get_vpd_params(adapter, &adapter->params.vpd); - if (ret < 0) - return ret; - - init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); - - /* - * Default port for debugging in case we can't reach FW. - */ - adapter->params.nports = 1; - adapter->params.portvec = 1; - return 0; -} - -int __devinit t4_port_init(struct adapter *adap, int mbox, int pf, int vf) -{ - u8 addr[6]; - int ret, i, j = 0; - struct fw_port_cmd c; - struct fw_rss_vi_config_cmd rvc; - - memset(&c, 0, sizeof(c)); - memset(&rvc, 0, sizeof(rvc)); - - for_each_port(adap, i) { - unsigned int rss_size; - struct port_info *p = adap2pinfo(adap, i); - - while ((adap->params.portvec & (1 << j)) == 0) - j++; - - c.op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) | - FW_CMD_REQUEST | FW_CMD_READ | - FW_PORT_CMD_PORTID(j)); - c.action_to_len16 = htonl( - FW_PORT_CMD_ACTION(FW_PORT_ACTION_GET_PORT_INFO) | - FW_LEN16(c)); - ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); - if (ret) - return ret; - - ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size); - if (ret < 0) - return ret; - - p->viid = ret; - p->tx_chan = j; - p->lport = j; - p->rss_size = rss_size; - memcpy(adap->port[i]->dev_addr, addr, ETH_ALEN); - memcpy(adap->port[i]->perm_addr, addr, ETH_ALEN); - adap->port[i]->dev_id = j; - - ret = ntohl(c.u.info.lstatus_to_modtype); - p->mdio_addr = (ret & FW_PORT_CMD_MDIOCAP) ? - FW_PORT_CMD_MDIOADDR_GET(ret) : -1; - p->port_type = FW_PORT_CMD_PTYPE_GET(ret); - p->mod_type = FW_PORT_MOD_TYPE_NA; - - rvc.op_to_viid = htonl(FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) | - FW_CMD_REQUEST | FW_CMD_READ | - FW_RSS_VI_CONFIG_CMD_VIID(p->viid)); - rvc.retval_len16 = htonl(FW_LEN16(rvc)); - ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc); - if (ret) - return ret; - p->rss_mode = ntohl(rvc.u.basicvirtual.defaultq_to_udpen); - - init_link_config(&p->link_cfg, ntohs(c.u.info.pcap)); - j++; - } - return 0; -} |