Merge branch 'regulator-drivers' into regulator-next

1 files changed, 23 insertions, 0 deletions

diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 2513a54ca2e..bac4c871f3b 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -69,6 +69,8 @@ enum regulator_status {
  *
  * @enable_time: Time taken for the regulator voltage output voltage to
  *               stabilise after being enabled, in microseconds.
+ * @set_ramp_delay: Set the ramp delay for the regulator. The driver should
+ *		select ramp delay equal to or less than(closest) ramp_delay.
  * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
  *               to stabilise after being set to a new value, in microseconds.
  *               The function provides the from and to voltage selector, the
@@ -115,6 +117,7 @@ struct regulator_ops {
 
 	/* Time taken to enable or set voltage on the regulator */
 	int (*enable_time) (struct regulator_dev *);
+	int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay);
 	int (*set_voltage_time_sel) (struct regulator_dev *,
 				     unsigned int old_selector,
 				     unsigned int new_selector);
@@ -172,12 +175,15 @@ enum regulator_type {
  *
  * @min_uV: Voltage given by the lowest selector (if linear mapping)
  * @uV_step: Voltage increase with each selector (if linear mapping)
+ * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
  * @volt_table: Voltage mapping table (if table based mapping)
  *
  * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
  * @vsel_mask: Mask for register bitfield used for selector
  * @enable_reg: Register for control when using regmap enable/disable ops
  * @enable_mask: Mask for control when using regmap enable/disable ops
+ *
+ * @enable_time: Time taken for initial enable of regulator (in uS).
  */
 struct regulator_desc {
 	const char *name;
@@ -191,6 +197,7 @@ struct regulator_desc {
 
 	unsigned int min_uV;
 	unsigned int uV_step;
+	unsigned int ramp_delay;
 
 	const unsigned int *volt_table;
 
@@ -198,6 +205,8 @@ struct regulator_desc {
 	unsigned int vsel_mask;
 	unsigned int enable_reg;
 	unsigned int enable_mask;
+
+	unsigned int enable_time;
 };
 
 /**
@@ -213,6 +222,9 @@ struct regulator_desc {
  * @of_node: OpenFirmware node to parse for device tree bindings (may be
  *           NULL).
  * @regmap: regmap to use for core regmap helpers
+ * @ena_gpio: GPIO controlling regulator enable.
+ * @ena_gpio_invert: Sense for GPIO enable control.
+ * @ena_gpio_flags: Flags to use when calling gpio_request_one()
  */
 struct regulator_config {
 	struct device *dev;
@@ -220,6 +232,10 @@ struct regulator_config {
 	void *driver_data;
 	struct device_node *of_node;
 	struct regmap *regmap;
+
+	int ena_gpio;
+	unsigned int ena_gpio_invert:1;
+	unsigned int ena_gpio_flags;
 };
 
 /*
@@ -258,6 +274,10 @@ struct regulator_dev {
 	void *reg_data;		/* regulator_dev data */
 
 	struct dentry *debugfs;
+
+	int ena_gpio;
+	unsigned int ena_gpio_invert:1;
+	unsigned int ena_gpio_state:1;
 };
 
 struct regulator_dev *
@@ -287,6 +307,9 @@ int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel);
 int regulator_is_enabled_regmap(struct regulator_dev *rdev);
 int regulator_enable_regmap(struct regulator_dev *rdev);
 int regulator_disable_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+				   unsigned int old_selector,
+				   unsigned int new_selector);
 
 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);