Move USB network drivers to drivers/net/usb.

It is preferable to group drivers by usage (net, scsi, ATA, ...) than
by bus.  When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer
is probably less qualified on networking issues than a networking
maintainer.  Also, from a practical standpoint, chips often
appear on multiple buses, which is why we do not put drivers into
drivers/pci/net.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 307 insertions, 0 deletions

diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h
new file mode 100644
index 00000000000..c7467823cd1
--- /dev/null
+++ b/drivers/net/usb/pegasus.h
@@ -0,0 +1,307 @@
+/*
+ * Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+
+#ifndef	PEGASUS_DEV
+
+#define	PEGASUS_II		0x80000000
+#define	HAS_HOME_PNA		0x40000000
+
+#define	PEGASUS_MTU		1536
+#define	RX_SKBS			4
+
+#define	EPROM_WRITE		0x01
+#define	EPROM_READ		0x02
+#define	EPROM_DONE		0x04
+#define	EPROM_WR_ENABLE		0x10
+#define	EPROM_LOAD		0x20
+
+#define	PHY_DONE		0x80
+#define	PHY_READ		0x40
+#define	PHY_WRITE		0x20
+#define	DEFAULT_GPIO_RESET	0x24
+#define	DEFAULT_GPIO_SET	0x26
+
+#define	PEGASUS_PRESENT		0x00000001
+#define	PEGASUS_TX_BUSY		0x00000004
+#define	PEGASUS_RX_BUSY		0x00000008
+#define	CTRL_URB_RUNNING	0x00000010
+#define	CTRL_URB_SLEEP		0x00000020
+#define	PEGASUS_UNPLUG		0x00000040
+#define	PEGASUS_RX_URB_FAIL	0x00000080
+#define	ETH_REGS_CHANGE		0x40000000
+#define	ETH_REGS_CHANGED	0x80000000
+
+#define	RX_MULTICAST		2
+#define	RX_PROMISCUOUS		4
+
+#define	REG_TIMEOUT		(HZ)
+#define	PEGASUS_TX_TIMEOUT	(HZ*10)
+
+#define	TX_UNDERRUN		0x80
+#define	EXCESSIVE_COL		0x40
+#define	LATE_COL		0x20
+#define	NO_CARRIER		0x10
+#define	LOSS_CARRIER		0x08
+#define	JABBER_TIMEOUT		0x04
+
+#define	LINK_STATUS		0x01
+
+#define	PEGASUS_REQT_READ	0xc0
+#define	PEGASUS_REQT_WRITE	0x40
+#define	PEGASUS_REQ_GET_REGS	0xf0
+#define	PEGASUS_REQ_SET_REGS	0xf1
+#define	PEGASUS_REQ_SET_REG	PEGASUS_REQ_SET_REGS
+
+enum pegasus_registers {
+	EthCtrl0 = 0,
+	EthCtrl1 = 1,
+	EthCtrl2 = 2,
+	EthID = 0x10,
+	Reg1d = 0x1d,
+	EpromOffset = 0x20,
+	EpromData = 0x21,	/* 0x21 low, 0x22 high byte */
+	EpromCtrl = 0x23,
+	PhyAddr = 0x25,
+	PhyData = 0x26, 	/* 0x26 low, 0x27 high byte */
+	PhyCtrl = 0x28,
+	UsbStst = 0x2a,
+	EthTxStat0 = 0x2b,
+	EthTxStat1 = 0x2c,
+	EthRxStat = 0x2d,
+	WakeupControl = 0x78,
+	Reg7b = 0x7b,
+	Gpio0 = 0x7e,
+	Gpio1 = 0x7f,
+	Reg81 = 0x81,
+};
+
+
+typedef struct pegasus {
+	struct usb_device	*usb;
+	struct usb_interface	*intf;
+	struct net_device	*net;
+	struct net_device_stats	stats;
+	struct mii_if_info	mii;
+	unsigned		flags;
+	unsigned		features;
+	u32			msg_enable;
+	u32			wolopts;
+	int			dev_index;
+	int			intr_interval;
+	struct tasklet_struct	rx_tl;
+	struct delayed_work	carrier_check;
+	struct urb		*ctrl_urb, *rx_urb, *tx_urb, *intr_urb;
+	struct sk_buff		*rx_pool[RX_SKBS];
+	struct sk_buff		*rx_skb;
+	struct usb_ctrlrequest	dr;
+	wait_queue_head_t	ctrl_wait;
+	spinlock_t		rx_pool_lock;
+	int			chip;
+	unsigned char		intr_buff[8];
+	__u8			tx_buff[PEGASUS_MTU];
+	__u8			eth_regs[4];
+	__u8			phy;
+	__u8			gpio_res;
+} pegasus_t;
+
+
+struct usb_eth_dev {
+	char	*name;
+	__u16	vendor;
+	__u16	device;
+	__u32	private; /* LSB is gpio reset value */
+};
+
+#define	VENDOR_3COM		0x0506
+#define	VENDOR_ABOCOM		0x07b8
+#define	VENDOR_ACCTON		0x083a
+#define	VENDOR_ADMTEK		0x07a6
+#define	VENDOR_AEILAB		0x3334
+#define	VENDOR_ALLIEDTEL	0x07c9
+#define	VENDOR_ATEN		0x0557
+#define	VENDOR_BELKIN		0x050d
+#define	VENDOR_BILLIONTON	0x08dd
+#define	VENDOR_COMPAQ		0x049f
+#define	VENDOR_COREGA		0x07aa
+#define	VENDOR_DLINK		0x2001
+#define	VENDOR_ELCON		0x0db7
+#define	VENDOR_ELECOM		0x056e
+#define	VENDOR_ELSA		0x05cc
+#define	VENDOR_GIGABYTE		0x1044
+#define	VENDOR_HAWKING		0x0e66
+#define	VENDOR_HP		0x03f0
+#define	VENDOR_IODATA		0x04bb
+#define	VENDOR_KINGSTON		0x0951
+#define	VENDOR_LANEED		0x056e
+#define	VENDOR_LINKSYS		0x066b
+#define	VENDOR_LINKSYS2		0x077b
+#define	VENDOR_MELCO		0x0411
+#define	VENDOR_MICROSOFT	0x045e
+#define	VENDOR_MOBILITY		0x1342
+#define	VENDOR_NETGEAR		0x0846
+#define	VENDOR_OCT		0x0b39
+#define	VENDOR_SMARTBRIDGES	0x08d1
+#define	VENDOR_SMC		0x0707
+#define	VENDOR_SOHOWARE		0x15e8
+#define	VENDOR_SIEMENS		0x067c
+
+
+#else	/* PEGASUS_DEV */
+
+PEGASUS_DEV( "3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
+		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II ) 	
+PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
+		VENDOR_ADMTEK, 0x8511,
+		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
+		VENDOR_ADMTEK, 0x8513,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
+		VENDOR_ADMTEK, 0x8515,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
+		VENDOR_ADMTEK, 0x0986,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "AN986A USB MAC", VENDOR_ADMTEK, 1986,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
+		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM,  0x4010,
+		DEFAULT_GPIO_RESET  | PEGASUS_II )
+PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
+		DEFAULT_GPIO_RESET | PEGASUS_II )	
+PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "OCT Inc.", VENDOR_OCT, 0x0109,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
+		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
+
+
+#endif	/* PEGASUS_DEV */