aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-05-16 00:51:43 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-05-16 00:51:43 +0200
commit5fd216bbb277b645109a889c489e13a7aafbc304 (patch)
tree9ab2016779ea6e49dff6aa49299bbc37f5381406 /drivers/ide
parent793a97228d3da876f42b7fb4d4a52cc8cc86dc81 (diff)
cs5530/sc1200: add ->udma_filter methods
CS5530/SC1200 specifies that two drives on the same cable cannot mix UDMA/MDMA. Add {cs5530,sc1200}_udma_filter() to handle this. This also makes it possible to remove open-coded best DMA mode selection and use standard ide_use_dma()/ide_max_dma_mode() helpers. While at it bump version numbers. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/pci/cs5530.c120
-rw-r--r--drivers/ide/pci/sc1200.c86
2 files changed, 89 insertions, 117 deletions
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index b2d7c132ef4..845500115f3 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -1,10 +1,10 @@
/*
- * linux/drivers/ide/pci/cs5530.c Version 0.7 Sept 10, 2002
+ * linux/drivers/ide/pci/cs5530.c Version 0.71 Mar 10 2007
*
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
- * Ditto of GNU General Public License.
- *
* Copyright (C) 2000 Mark Lord <mlord@pobox.com>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ *
* May be copied or modified under the terms of the GNU General Public License
*
* Development of this chipset driver was funded
@@ -88,79 +88,66 @@ static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autot
}
/**
- * cs5530_config_dma - select/set DMA and UDMA modes
+ * cs5530_udma_filter - UDMA filter
+ * @drive: drive
+ *
+ * cs5530_udma_filter() does UDMA mask filtering for the given drive
+ * taking into the consideration capabilities of the mate device.
+ *
+ * The CS5530 specifies that two drives sharing a cable cannot mix
+ * UDMA/MDMA. It has to be one or the other, for the pair, though
+ * different timings can still be chosen for each drive. We could
+ * set the appropriate timing bits on the fly, but that might be
+ * a bit confusing. So, for now we statically handle this requirement
+ * by looking at our mate drive to see what it is capable of, before
+ * choosing a mode for our own drive.
+ *
+ * Note: This relies on the fact we never fail from UDMA to MWDMA2
+ * but instead drop to PIO.
+ */
+
+static u8 cs5530_udma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
+ struct hd_driveid *mateid = mate->id;
+ u8 mask = hwif->ultra_mask;
+
+ if (mate->present == 0)
+ goto out;
+
+ if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
+ if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
+ goto out;
+ if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
+ mask = 0;
+ }
+out:
+ return mask;
+}
+
+/**
+ * cs5530_config_dma - set DMA/UDMA mode
* @drive: drive to tune
*
- * cs5530_config_dma() handles selection/setting of DMA/UDMA modes
- * for both the chipset and drive. The CS5530 has limitations about
- * mixing DMA/UDMA on the same cable.
+ * cs5530_config_dma() handles setting of DMA/UDMA mode
+ * for both the chipset and drive.
*/
-
-static int cs5530_config_dma (ide_drive_t *drive)
+
+static int cs5530_config_dma(ide_drive_t *drive)
{
- int udma_ok = 1, mode = 0;
- ide_hwif_t *hwif = HWIF(drive);
- int unit = drive->select.b.unit;
- ide_drive_t *mate = &hwif->drives[unit^1];
- struct hd_driveid *id = drive->id;
- unsigned int reg, timings = 0;
- unsigned long basereg;
+ ide_hwif_t *hwif = drive->hwif;
+ unsigned int reg, timings = 0;
+ unsigned long basereg;
+ u8 unit = drive->dn & 1, mode = 0;
/*
* Default to DMA-off in case we run into trouble here.
*/
hwif->dma_off_quietly(drive);
- /*
- * The CS5530 specifies that two drives sharing a cable cannot
- * mix UDMA/MDMA. It has to be one or the other, for the pair,
- * though different timings can still be chosen for each drive.
- * We could set the appropriate timing bits on the fly,
- * but that might be a bit confusing. So, for now we statically
- * handle this requirement by looking at our mate drive to see
- * what it is capable of, before choosing a mode for our own drive.
- *
- * Note: This relies on the fact we never fail from UDMA to MWDMA_2
- * but instead drop to PIO
- */
- if (mate->present) {
- struct hd_driveid *mateid = mate->id;
- if (mateid && (mateid->capability & 1) &&
- !__ide_dma_bad_drive(mate)) {
- if ((mateid->field_valid & 4) &&
- (mateid->dma_ultra & 7))
- udma_ok = 1;
- else if ((mateid->field_valid & 2) &&
- (mateid->dma_mword & 7))
- udma_ok = 0;
- else
- udma_ok = 1;
- }
- }
-
- /*
- * Now see what the current drive is capable of,
- * selecting UDMA only if the mate said it was ok.
- */
- if (id && (id->capability & 1) && drive->autodma &&
- !__ide_dma_bad_drive(drive)) {
- if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) {
- if (id->dma_ultra & 4)
- mode = XFER_UDMA_2;
- else if (id->dma_ultra & 2)
- mode = XFER_UDMA_1;
- else if (id->dma_ultra & 1)
- mode = XFER_UDMA_0;
- }
- if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
- if (id->dma_mword & 4)
- mode = XFER_MW_DMA_2;
- else if (id->dma_mword & 2)
- mode = XFER_MW_DMA_1;
- else if (id->dma_mword & 1)
- mode = XFER_MW_DMA_0;
- }
- }
+ if (ide_use_dma(drive))
+ mode = ide_max_dma_mode(drive);
/*
* Tell the drive to switch to the new mode; abort on failure.
@@ -332,6 +319,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
hwif->ultra_mask = 0x07;
hwif->mwdma_mask = 0x07;
+ hwif->udma_filter = cs5530_udma_filter;
hwif->ide_dma_check = &cs5530_config_dma;
if (!noautodma)
hwif->autodma = 1;
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index b5ae0c50e21..c0254b5e7d9 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -1,7 +1,9 @@
/*
- * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003
+ * linux/drivers/ide/pci/sc1200.c Version 0.92 Mar 10 2007
*
* Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ *
* May be copied or modified under the terms of the GNU General Public License
*
* Development of this chipset driver was funded
@@ -93,57 +95,33 @@ static const unsigned int sc1200_pio_timings[4][5] =
*/
//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
-static int sc1200_autoselect_dma_mode (ide_drive_t *drive)
+/*
+ * The SC1200 specifies that two drives sharing a cable cannot mix
+ * UDMA/MDMA. It has to be one or the other, for the pair, though
+ * different timings can still be chosen for each drive. We could
+ * set the appropriate timing bits on the fly, but that might be
+ * a bit confusing. So, for now we statically handle this requirement
+ * by looking at our mate drive to see what it is capable of, before
+ * choosing a mode for our own drive.
+ */
+static u8 sc1200_udma_filter(ide_drive_t *drive)
{
- int udma_ok = 1, mode = 0;
- ide_hwif_t *hwif = HWIF(drive);
- int unit = drive->select.b.unit;
- ide_drive_t *mate = &hwif->drives[unit^1];
- struct hd_driveid *id = drive->id;
-
- /*
- * The SC1200 specifies that two drives sharing a cable cannot
- * mix UDMA/MDMA. It has to be one or the other, for the pair,
- * though different timings can still be chosen for each drive.
- * We could set the appropriate timing bits on the fly,
- * but that might be a bit confusing. So, for now we statically
- * handle this requirement by looking at our mate drive to see
- * what it is capable of, before choosing a mode for our own drive.
- */
- if (mate->present) {
- struct hd_driveid *mateid = mate->id;
- if (mateid && (mateid->capability & 1) && !__ide_dma_bad_drive(mate)) {
- if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
- udma_ok = 1;
- else if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
- udma_ok = 0;
- else
- udma_ok = 1;
- }
- }
- /*
- * Now see what the current drive is capable of,
- * selecting UDMA only if the mate said it was ok.
- */
- if (id && (id->capability & 1) && hwif->autodma && !__ide_dma_bad_drive(drive)) {
- if (udma_ok && (id->field_valid & 4) && (id->dma_ultra & 7)) {
- if (id->dma_ultra & 4)
- mode = XFER_UDMA_2;
- else if (id->dma_ultra & 2)
- mode = XFER_UDMA_1;
- else if (id->dma_ultra & 1)
- mode = XFER_UDMA_0;
- }
- if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) {
- if (id->dma_mword & 4)
- mode = XFER_MW_DMA_2;
- else if (id->dma_mword & 2)
- mode = XFER_MW_DMA_1;
- else if (id->dma_mword & 1)
- mode = XFER_MW_DMA_0;
- }
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
+ struct hd_driveid *mateid = mate->id;
+ u8 mask = hwif->ultra_mask;
+
+ if (mate->present == 0)
+ goto out;
+
+ if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
+ if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
+ goto out;
+ if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
+ mask = 0;
}
- return mode;
+out:
+ return mask;
}
/*
@@ -250,7 +228,12 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
*/
static int sc1200_config_dma (ide_drive_t *drive)
{
- return sc1200_config_dma2(drive, sc1200_autoselect_dma_mode(drive));
+ u8 mode = 0;
+
+ if (ide_use_dma(drive))
+ mode = ide_max_dma_mode(drive);
+
+ return sc1200_config_dma2(drive, mode);
}
@@ -461,6 +444,7 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
hwif->serialized = hwif->mate->serialized = 1;
hwif->autodma = 0;
if (hwif->dma_base) {
+ hwif->udma_filter = sc1200_udma_filter;
hwif->ide_dma_check = &sc1200_config_dma;
hwif->ide_dma_end = &sc1200_ide_dma_end;
if (!noautodma)