ARM: ux500: Remove unused i2c platform_data initialisation code

Now that u5500 is obsolete, u8500 is the only user of the Nomadik
i2c driver. As such there is no requirement to differentiate between
initialisation values. By the time a new SoC is released, almost all
of the ux500 platform will be DT:ed, so we can make decisions based
on the compatible property instead.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

2 files changed, 5 insertions, 37 deletions

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 1bf179e91ea..f4bbe5d2fa5 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -331,43 +331,12 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	},
 };
 
-#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm)	\
-static struct nmk_i2c_controller u8500_i2c##id##_data = { \
-	/*				\
-	 * slave data setup time, which is	\
-	 * 250 ns,100ns,10ns which is 14,6,2	\
-	 * respectively for a 48 Mhz	\
-	 * i2c clock			\
-	 */				\
-	.slsu		= _slsu,	\
-	/* Tx FIFO threshold */		\
-	.tft		= _tft,		\
-	/* Rx FIFO threshold */		\
-	.rft		= _rft,		\
-	/* std. mode operation */	\
-	.clk_freq	= clk,		\
-	/* Slave response timeout(ms) */\
-	.timeout	= t_out,	\
-	.sm		= _sm,		\
-}
-
-/*
- * The board uses 4 i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 8 and standard
- * mode of operation
- */
-U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-
 static void __init mop500_i2c_init(struct device *parent)
 {
-	db8500_add_i2c0(parent, &u8500_i2c0_data);
-	db8500_add_i2c1(parent, &u8500_i2c1_data);
-	db8500_add_i2c2(parent, &u8500_i2c2_data);
-	db8500_add_i2c3(parent, &u8500_i2c3_data);
+	db8500_add_i2c0(parent, NULL);
+	db8500_add_i2c1(parent, NULL);
+	db8500_add_i2c2(parent, NULL);
+	db8500_add_i2c3(parent, NULL);
 }
 
 static struct gpio_keys_button mop500_gpio_keys[] = {
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 5267ab93d55..a92440dbef0 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -965,8 +965,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
 	adap->owner	= THIS_MODULE;
 	adap->class	= I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo	= &nmk_i2c_algo;
-	adap->timeout	= pdata->timeout ? msecs_to_jiffies(pdata->timeout) :
-		msecs_to_jiffies(20000);
+	adap->timeout	= msecs_to_jiffies(pdata->timeout);
 	snprintf(adap->name, sizeof(adap->name),
 		 "Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start);