aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43/b43.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/b43/b43.h')
-rw-r--r--drivers/net/wireless/b43/b43.h21
1 files changed, 17 insertions, 4 deletions
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 72821c456b0..bd4cb75b6ca 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -153,6 +153,19 @@
#define B43_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna
* with bluetooth */
+/* SPROM boardflags2_lo values */
+#define B43_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */
+#define B43_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */
+#define B43_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */
+#define B43_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */
+#define B43_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */
+#define B43_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */
+#define B43_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */
+#define B43_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */
+#define B43_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */
+#define B43_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */
+#define B43_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */
+
/* GPIO register offset, in both ChipCommon and PCI core. */
#define B43_GPIO_CONTROL 0x6c
@@ -403,10 +416,10 @@ enum {
/* 802.11 core specific TM State Low (SSB_TMSLOW) flags */
#define B43_TMSLOW_GMODE 0x20000000 /* G Mode Enable */
-#define B43_TMSLOW_PHYCLKSPEED 0x00C00000 /* PHY clock speed mask (N-PHY only) */
-#define B43_TMSLOW_PHYCLKSPEED_40MHZ 0x00000000 /* 40 MHz PHY */
-#define B43_TMSLOW_PHYCLKSPEED_80MHZ 0x00400000 /* 80 MHz PHY */
-#define B43_TMSLOW_PHYCLKSPEED_160MHZ 0x00800000 /* 160 MHz PHY */
+#define B43_TMSLOW_PHY_BANDWIDTH 0x00C00000 /* PHY band width and clock speed mask (N-PHY only) */
+#define B43_TMSLOW_PHY_BANDWIDTH_10MHZ 0x00000000 /* 10 MHz bandwidth, 40 MHz PHY */
+#define B43_TMSLOW_PHY_BANDWIDTH_20MHZ 0x00400000 /* 20 MHz bandwidth, 80 MHz PHY */
+#define B43_TMSLOW_PHY_BANDWIDTH_40MHZ 0x00800000 /* 40 MHz bandwidth, 160 MHz PHY */
#define B43_TMSLOW_PLLREFSEL 0x00200000 /* PLL Frequency Reference Select (rev >= 5) */
#define B43_TMSLOW_MACPHYCLKEN 0x00100000 /* MAC PHY Clock Control Enable (rev >= 5) */
#define B43_TMSLOW_PHYRESET 0x00080000 /* PHY Reset */