aboutsummaryrefslogtreecommitdiff
path: root/drivers/uwb/i1480/i1480u-wlp/lc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/uwb/i1480/i1480u-wlp/lc.c')
-rw-r--r--drivers/uwb/i1480/i1480u-wlp/lc.c424
1 files changed, 0 insertions, 424 deletions
diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c
deleted file mode 100644
index def778cf221..00000000000
--- a/drivers/uwb/i1480/i1480u-wlp/lc.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * WUSB Wire Adapter: WLP interface
- * Driver for the Linux Network stack.
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: docs
- *
- * This implements a very simple network driver for the WLP USB
- * device that is associated to a UWB (Ultra Wide Band) host.
- *
- * This is seen as an interface of a composite device. Once the UWB
- * host has an association to another WLP capable device, the
- * networking interface (aka WLP) can start to send packets back and
- * forth.
- *
- * Limitations:
- *
- * - Hand cranked; can't ifup the interface until there is an association
- *
- * - BW allocation very simplistic [see i1480u_mas_set() and callees].
- *
- *
- * ROADMAP:
- *
- * ENTRY POINTS (driver model):
- *
- * i1480u_driver_{exit,init}(): initialization of the driver.
- *
- * i1480u_probe(): called by the driver code when a device
- * matching 'i1480u_id_table' is connected.
- *
- * This allocs a netdev instance, inits with
- * i1480u_add(), then registers_netdev().
- * i1480u_init()
- * i1480u_add()
- *
- * i1480u_disconnect(): device has been disconnected/module
- * is being removed.
- * i1480u_rm()
- */
-#include <linux/gfp.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-
-#include "i1480u-wlp.h"
-
-
-
-static inline
-void i1480u_init(struct i1480u *i1480u)
-{
- /* nothing so far... doesn't it suck? */
- spin_lock_init(&i1480u->lock);
- INIT_LIST_HEAD(&i1480u->tx_list);
- spin_lock_init(&i1480u->tx_list_lock);
- wlp_options_init(&i1480u->options);
- edc_init(&i1480u->tx_errors);
- edc_init(&i1480u->rx_errors);
-#ifdef i1480u_FLOW_CONTROL
- edc_init(&i1480u->notif_edc);
-#endif
- stats_init(&i1480u->lqe_stats);
- stats_init(&i1480u->rssi_stats);
- wlp_init(&i1480u->wlp);
-}
-
-/**
- * Fill WLP device information structure
- *
- * The structure will contain a few character arrays, each ending with a
- * null terminated string. Each string has to fit (excluding terminating
- * character) into a specified range obtained from the WLP substack.
- *
- * It is still not clear exactly how this device information should be
- * obtained. Until we find out we use the USB device descriptor as backup, some
- * information elements have intuitive mappings, other not.
- */
-static
-void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info)
-{
- struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
- struct usb_device *usb_dev = i1480u->usb_dev;
- /* Treat device name and model name the same */
- if (usb_dev->descriptor.iProduct) {
- usb_string(usb_dev, usb_dev->descriptor.iProduct,
- dev_info->name, sizeof(dev_info->name));
- usb_string(usb_dev, usb_dev->descriptor.iProduct,
- dev_info->model_name, sizeof(dev_info->model_name));
- }
- if (usb_dev->descriptor.iManufacturer)
- usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
- dev_info->manufacturer,
- sizeof(dev_info->manufacturer));
- scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x",
- __le16_to_cpu(usb_dev->descriptor.bcdDevice));
- if (usb_dev->descriptor.iSerialNumber)
- usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
- dev_info->serial, sizeof(dev_info->serial));
- /* FIXME: where should we obtain category? */
- dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER);
- /* FIXME: Complete OUI and OUIsubdiv attributes */
-}
-
-#ifdef i1480u_FLOW_CONTROL
-/**
- * Callback for the notification endpoint
- *
- * This mostly controls the xon/xoff protocol. In case of hard error,
- * we stop the queue. If not, we always retry.
- */
-static
-void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs)
-{
- struct i1480u *i1480u = urb->context;
- struct usb_interface *usb_iface = i1480u->usb_iface;
- struct device *dev = &usb_iface->dev;
- int result;
-
- switch (urb->status) {
- case 0: /* Got valid data, do xon/xoff */
- switch (i1480u->notif_buffer[0]) {
- case 'N':
- dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies);
- netif_stop_queue(i1480u->net_dev);
- break;
- case 'A':
- dev_err(dev, "XON STARTING queue at %lu\n", jiffies);
- netif_start_queue(i1480u->net_dev);
- break;
- default:
- dev_err(dev, "NEP: unknown data 0x%02hhx\n",
- i1480u->notif_buffer[0]);
- }
- break;
- case -ECONNRESET: /* Controlled situation ... */
- case -ENOENT: /* we killed the URB... */
- dev_err(dev, "NEP: URB reset/noent %d\n", urb->status);
- goto error;
- case -ESHUTDOWN: /* going away! */
- dev_err(dev, "NEP: URB down %d\n", urb->status);
- goto error;
- default: /* Retry unless it gets ugly */
- if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS,
- EDC_ERROR_TIMEFRAME)) {
- dev_err(dev, "NEP: URB max acceptable errors "
- "exceeded; resetting device\n");
- goto error_reset;
- }
- dev_err(dev, "NEP: URB error %d\n", urb->status);
- break;
- }
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result < 0) {
- dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n",
- result);
- goto error_reset;
- }
- return;
-
-error_reset:
- wlp_reset_all(&i1480-wlp);
-error:
- netif_stop_queue(i1480u->net_dev);
- return;
-}
-#endif
-
-static const struct net_device_ops i1480u_netdev_ops = {
- .ndo_open = i1480u_open,
- .ndo_stop = i1480u_stop,
- .ndo_start_xmit = i1480u_hard_start_xmit,
- .ndo_tx_timeout = i1480u_tx_timeout,
- .ndo_set_config = i1480u_set_config,
- .ndo_change_mtu = i1480u_change_mtu,
-};
-
-static
-int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface)
-{
- int result = -ENODEV;
- struct wlp *wlp = &i1480u->wlp;
- struct usb_device *usb_dev = interface_to_usbdev(iface);
- struct net_device *net_dev = i1480u->net_dev;
- struct uwb_rc *rc;
- struct uwb_dev *uwb_dev;
-#ifdef i1480u_FLOW_CONTROL
- struct usb_endpoint_descriptor *epd;
-#endif
-
- i1480u->usb_dev = usb_get_dev(usb_dev);
- i1480u->usb_iface = iface;
- rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev);
- if (rc == NULL) {
- dev_err(&iface->dev, "Cannot get associated UWB Radio "
- "Controller\n");
- goto out;
- }
- wlp->xmit_frame = i1480u_xmit_frame;
- wlp->fill_device_info = i1480u_fill_device_info;
- wlp->stop_queue = i1480u_stop_queue;
- wlp->start_queue = i1480u_start_queue;
- result = wlp_setup(wlp, rc, net_dev);
- if (result < 0) {
- dev_err(&iface->dev, "Cannot setup WLP\n");
- goto error_wlp_setup;
- }
- result = 0;
- ether_setup(net_dev); /* make it an etherdevice */
- uwb_dev = &rc->uwb_dev;
- /* FIXME: hookup address change notifications? */
-
- memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data,
- sizeof(net_dev->dev_addr));
-
- net_dev->hard_header_len = sizeof(struct untd_hdr_cmp)
- + sizeof(struct wlp_tx_hdr)
- + WLP_DATA_HLEN
- + ETH_HLEN;
- net_dev->mtu = 3500;
- net_dev->tx_queue_len = 20; /* FIXME: maybe use 1000? */
-
-/* net_dev->flags &= ~IFF_BROADCAST; FIXME: BUG in firmware */
- /* FIXME: multicast disabled */
- net_dev->flags &= ~IFF_MULTICAST;
- net_dev->features &= ~NETIF_F_SG;
- net_dev->features &= ~NETIF_F_FRAGLIST;
- /* All NETIF_F_*_CSUM disabled */
- net_dev->features |= NETIF_F_HIGHDMA;
- net_dev->watchdog_timeo = 5*HZ; /* FIXME: a better default? */
-
- net_dev->netdev_ops = &i1480u_netdev_ops;
-
-#ifdef i1480u_FLOW_CONTROL
- /* Notification endpoint setup (submitted when we open the device) */
- i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (i1480u->notif_urb == NULL) {
- dev_err(&iface->dev, "Unable to allocate notification URB\n");
- result = -ENOMEM;
- goto error_urb_alloc;
- }
- epd = &iface->cur_altsetting->endpoint[0].desc;
- usb_fill_int_urb(i1480u->notif_urb, usb_dev,
- usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
- i1480u->notif_buffer, sizeof(i1480u->notif_buffer),
- i1480u_notif_cb, i1480u, epd->bInterval);
-
-#endif
-
- i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX;
- i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD;
- i1480u->tx_inflight.restart_ts = jiffies;
- usb_set_intfdata(iface, i1480u);
- return result;
-
-#ifdef i1480u_FLOW_CONTROL
-error_urb_alloc:
-#endif
- wlp_remove(wlp);
-error_wlp_setup:
- uwb_rc_put(rc);
-out:
- usb_put_dev(i1480u->usb_dev);
- return result;
-}
-
-static void i1480u_rm(struct i1480u *i1480u)
-{
- struct uwb_rc *rc = i1480u->wlp.rc;
- usb_set_intfdata(i1480u->usb_iface, NULL);
-#ifdef i1480u_FLOW_CONTROL
- usb_kill_urb(i1480u->notif_urb);
- usb_free_urb(i1480u->notif_urb);
-#endif
- wlp_remove(&i1480u->wlp);
- uwb_rc_put(rc);
- usb_put_dev(i1480u->usb_dev);
-}
-
-/** Just setup @net_dev's i1480u private data */
-static void i1480u_netdev_setup(struct net_device *net_dev)
-{
- struct i1480u *i1480u = netdev_priv(net_dev);
- /* Initialize @i1480u */
- memset(i1480u, 0, sizeof(*i1480u));
- i1480u_init(i1480u);
-}
-
-/**
- * Probe a i1480u interface and register it
- *
- * @iface: USB interface to link to
- * @id: USB class/subclass/protocol id
- * @returns: 0 if ok, < 0 errno code on error.
- *
- * Does basic housekeeping stuff and then allocs a netdev with space
- * for the i1480u data. Initializes, registers in i1480u, registers in
- * netdev, ready to go.
- */
-static int i1480u_probe(struct usb_interface *iface,
- const struct usb_device_id *id)
-{
- int result;
- struct net_device *net_dev;
- struct device *dev = &iface->dev;
- struct i1480u *i1480u;
-
- /* Allocate instance [calls i1480u_netdev_setup() on it] */
- result = -ENOMEM;
- net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup);
- if (net_dev == NULL) {
- dev_err(dev, "no memory for network device instance\n");
- goto error_alloc_netdev;
- }
- SET_NETDEV_DEV(net_dev, dev);
- i1480u = netdev_priv(net_dev);
- i1480u->net_dev = net_dev;
- result = i1480u_add(i1480u, iface); /* Now setup all the wlp stuff */
- if (result < 0) {
- dev_err(dev, "cannot add i1480u device: %d\n", result);
- goto error_i1480u_add;
- }
- result = register_netdev(net_dev); /* Okey dokey, bring it up */
- if (result < 0) {
- dev_err(dev, "cannot register network device: %d\n", result);
- goto error_register_netdev;
- }
- i1480u_sysfs_setup(i1480u);
- if (result < 0)
- goto error_sysfs_init;
- return 0;
-
-error_sysfs_init:
- unregister_netdev(net_dev);
-error_register_netdev:
- i1480u_rm(i1480u);
-error_i1480u_add:
- free_netdev(net_dev);
-error_alloc_netdev:
- return result;
-}
-
-
-/**
- * Disconect a i1480u from the system.
- *
- * i1480u_stop() has been called before, so al the rx and tx contexts
- * have been taken down already. Make sure the queue is stopped,
- * unregister netdev and i1480u, free and kill.
- */
-static void i1480u_disconnect(struct usb_interface *iface)
-{
- struct i1480u *i1480u;
- struct net_device *net_dev;
-
- i1480u = usb_get_intfdata(iface);
- net_dev = i1480u->net_dev;
- netif_stop_queue(net_dev);
-#ifdef i1480u_FLOW_CONTROL
- usb_kill_urb(i1480u->notif_urb);
-#endif
- i1480u_sysfs_release(i1480u);
- unregister_netdev(net_dev);
- i1480u_rm(i1480u);
- free_netdev(net_dev);
-}
-
-static struct usb_device_id i1480u_id_table[] = {
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE \
- | USB_DEVICE_ID_MATCH_DEV_INFO \
- | USB_DEVICE_ID_MATCH_INT_INFO,
- .idVendor = 0x8086,
- .idProduct = 0x0c3b,
- .bDeviceClass = 0xef,
- .bDeviceSubClass = 0x02,
- .bDeviceProtocol = 0x02,
- .bInterfaceClass = 0xff,
- .bInterfaceSubClass = 0xff,
- .bInterfaceProtocol = 0xff,
- },
- {},
-};
-MODULE_DEVICE_TABLE(usb, i1480u_id_table);
-
-static struct usb_driver i1480u_driver = {
- .name = KBUILD_MODNAME,
- .probe = i1480u_probe,
- .disconnect = i1480u_disconnect,
- .id_table = i1480u_id_table,
-};
-
-static int __init i1480u_driver_init(void)
-{
- return usb_register(&i1480u_driver);
-}
-module_init(i1480u_driver_init);
-
-
-static void __exit i1480u_driver_exit(void)
-{
- usb_deregister(&i1480u_driver);
-}
-module_exit(i1480u_driver_exit);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB");
-MODULE_LICENSE("GPL");