aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/mmc_block.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/mmc_block.c')
-rw-r--r--drivers/mmc/mmc_block.c60
1 files changed, 7 insertions, 53 deletions
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 115cc21094b..a0e0dad1b41 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -30,6 +30,7 @@
#include <linux/mutex.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
#include <asm/system.h>
@@ -171,8 +172,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.cmd.arg = req->sector << 9;
brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
- brq.data.timeout_ns = card->csd.tacc_ns * 10;
- brq.data.timeout_clks = card->csd.tacc_clks * 10;
brq.data.blksz_bits = md->block_bits;
brq.data.blksz = 1 << md->block_bits;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
@@ -180,6 +179,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.stop.arg = 0;
brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
+
if (rq_data_dir(req) == READ) {
brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
brq.data.flags |= MMC_DATA_READ;
@@ -187,12 +188,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.cmd.opcode = MMC_WRITE_BLOCK;
brq.data.flags |= MMC_DATA_WRITE;
brq.data.blocks = 1;
-
- /*
- * Scale up the timeout by the r2w factor
- */
- brq.data.timeout_ns <<= card->csd.r2w_factor;
- brq.data.timeout_clks <<= card->csd.r2w_factor;
}
if (brq.data.blocks > 1) {
@@ -324,52 +319,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
md->read_only = mmc_blk_readonly(card);
/*
- * Figure out a workable block size. MMC cards have:
- * - two block sizes, one for read and one for write.
- * - may support partial reads and/or writes
- * (allows block sizes smaller than specified)
- */
- md->block_bits = card->csd.read_blkbits;
- if (card->csd.write_blkbits != card->csd.read_blkbits) {
- if (card->csd.write_blkbits < card->csd.read_blkbits &&
- card->csd.read_partial) {
- /*
- * write block size is smaller than read block
- * size, but we support partial reads, so choose
- * the smaller write block size.
- */
- md->block_bits = card->csd.write_blkbits;
- } else if (card->csd.write_blkbits > card->csd.read_blkbits &&
- card->csd.write_partial) {
- /*
- * read block size is smaller than write block
- * size, but we support partial writes. Use read
- * block size.
- */
- } else {
- /*
- * We don't support this configuration for writes.
- */
- printk(KERN_ERR "%s: unable to select block size for "
- "writing (rb%u wb%u rp%u wp%u)\n",
- mmc_card_id(card),
- 1 << card->csd.read_blkbits,
- 1 << card->csd.write_blkbits,
- card->csd.read_partial,
- card->csd.write_partial);
- md->read_only = 1;
- }
- }
-
- /*
- * Refuse to allow block sizes smaller than 512 bytes.
+ * Both SD and MMC specifications state (although a bit
+ * unclearly in the MMC case) that a block size of 512
+ * bytes must always be supported by the card.
*/
- if (md->block_bits < 9) {
- printk(KERN_ERR "%s: unable to support block size %u\n",
- mmc_card_id(card), 1 << md->block_bits);
- ret = -EINVAL;
- goto err_kfree;
- }
+ md->block_bits = 9;
md->disk = alloc_disk(1 << MMC_SHIFT);
if (md->disk == NULL) {