diff options
Diffstat (limited to 'arch/blackfin/mach-bf537/include/mach')
| -rw-r--r-- | arch/blackfin/mach-bf537/include/mach/anomaly.h | 11 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/include/mach/cdefBF534.h | 44 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/include/mach/defBF534.h | 160 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/include/mach/gpio.h | 96 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/include/mach/pll.h | 57 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/include/mach/portmux.h | 7 |
6 files changed, 136 insertions, 239 deletions
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index d2c427bc665..43df6afd22a 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -5,7 +5,7 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ @@ -162,8 +162,14 @@ #define ANOMALY_05000461 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -179,6 +185,7 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) @@ -211,6 +218,6 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) -#define ANOMALY_05000475 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h index 91825c9bd22..fbeb35e1413 100644 --- a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h @@ -1750,48 +1750,4 @@ /* These need to be last due to the cdef/linux inter-dependencies */ #include <asm/irq.h> -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore_hw(flags); -} - -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save_hw(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore_hw(flags); -} - #endif /* _CDEF_BF534_H */ diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index cf396ea4009..0323e6bacda 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -434,22 +434,22 @@ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ #define TWI0_REGBASE 0xFFC01400 -#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ -#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ -#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ -#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ -#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ -#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ -#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ -#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ -#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ -#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ -#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ -#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ -#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ -#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ -#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ -#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ +#define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI0_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI0_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI0_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ #define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ @@ -1071,50 +1071,6 @@ #define FPE 0x10 /* Force Parity Error On Transmit */ #define FFE 0x20 /* Force Framing Error On Transmit */ -/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ -/* SPI_CTL Masks */ -#define TIMOD 0x0003 /* Transfer Initiate Mode */ -#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ -#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ -#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ -#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ -#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ -#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ -#define PSSE 0x0010 /* Slave-Select Input Enable */ -#define EMISO 0x0020 /* Enable MISO As Output */ -#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ -#define LSBF 0x0200 /* LSB First */ -#define CPHA 0x0400 /* Clock Phase */ -#define CPOL 0x0800 /* Clock Polarity */ -#define MSTR 0x1000 /* Master/Slave* */ -#define WOM 0x2000 /* Write Open Drain Master */ -#define SPE 0x4000 /* SPI Enable */ - -/* SPI_FLG Masks */ -#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ -#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ -#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ -#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ -#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ -#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ -#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ -#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ -#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ -#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ -#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ -#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ -#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ -#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ - -/* SPI_STAT Masks */ -#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ -#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ -#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ -#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ -#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ -#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ -#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ - /* **************** GENERAL PURPOSE TIMER MASKS **********************/ /* TIMER_ENABLE Masks */ #define TIMEN0 0x0001 /* Enable Timer 0 */ @@ -1241,86 +1197,6 @@ #define PH14 0x4000 #define PH15 0x8000 -/* ******************* SERIAL PORT MASKS **************************************/ -/* SPORTx_TCR1 Masks */ -#define TSPEN 0x0001 /* Transmit Enable */ -#define ITCLK 0x0002 /* Internal Transmit Clock Select */ -#define DTYPE_NORM 0x0004 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define TLSBIT 0x0010 /* Transmit Bit Order */ -#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ -#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ -#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ -#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ -#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ -#define TCKFE 0x4000 /* Clock Falling Edge Select */ - -/* SPORTx_TCR2 Masks and Macro */ -#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ -#define TXSE 0x0100 /* TX Secondary Enable */ -#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ -#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ - -/* SPORTx_RCR1 Masks */ -#define RSPEN 0x0001 /* Receive Enable */ -#define IRCLK 0x0002 /* Internal Receive Clock Select */ -#define DTYPE_NORM 0x0004 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define RLSBIT 0x0010 /* Receive Bit Order */ -#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ -#define RFSR 0x0400 /* Receive Frame Sync Required Select */ -#define LRFS 0x1000 /* Low Receive Frame Sync Select */ -#define LARFS 0x2000 /* Late Receive Frame Sync Select */ -#define RCKFE 0x4000 /* Clock Falling Edge Select */ - -/* SPORTx_RCR2 Masks */ -#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ -#define RXSE 0x0100 /* RX Secondary Enable */ -#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ -#define RRFST 0x0400 /* Right-First Data Order */ - -/* SPORTx_STAT Masks */ -#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ -#define RUVF 0x0002 /* Sticky Receive Underflow Status */ -#define ROVF 0x0004 /* Sticky Receive Overflow Status */ -#define TXF 0x0008 /* Transmit FIFO Full Status */ -#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ -#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ -#define TXHRE 0x0040 /* Transmit Hold Register Empty */ - -/* SPORTx_MCMC1 Macros */ -#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ - -/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ -#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ - -/* SPORTx_MCMC2 Masks */ -#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ -#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ -#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ -#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ -#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ -#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ -#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ -#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ -#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ -#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ -#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ -#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ -#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ -#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ -#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ -#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ -#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ -#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ -#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ -#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ -#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ -#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ -#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ - /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ /* EBIU_AMGCTL Masks */ #define AMCKEN 0x0001 /* Enable CLKOUT */ @@ -1642,7 +1518,7 @@ #define TWI_ENA 0x0080 /* TWI Enable */ #define SCCB 0x0200 /* SCCB Compatibility Enable */ -/* TWI_SLAVE_CTRL Masks */ +/* TWI_SLAVE_CTL Masks */ #define SEN 0x0001 /* Slave Enable */ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ @@ -1653,7 +1529,7 @@ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ #define GCALL 0x0002 /* General Call Indicator */ -/* TWI_MASTER_CTRL Masks */ +/* TWI_MASTER_CTL Masks */ #define MEN 0x0001 /* Master Mode Enable */ #define MADD_LEN 0x0002 /* Master Address Length */ #define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ diff --git a/arch/blackfin/mach-bf537/include/mach/gpio.h b/arch/blackfin/mach-bf537/include/mach/gpio.h index 104bff85290..f80c2995efd 100644 --- a/arch/blackfin/mach-bf537/include/mach/gpio.h +++ b/arch/blackfin/mach-bf537/include/mach/gpio.h @@ -9,54 +9,54 @@ #define MAX_BLACKFIN_GPIOS 48 -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 -#define GPIO_PG0 16 -#define GPIO_PG1 17 -#define GPIO_PG2 18 -#define GPIO_PG3 19 -#define GPIO_PG4 20 -#define GPIO_PG5 21 -#define GPIO_PG6 22 -#define GPIO_PG7 23 -#define GPIO_PG8 24 -#define GPIO_PG9 25 -#define GPIO_PG10 26 -#define GPIO_PG11 27 -#define GPIO_PG12 28 -#define GPIO_PG13 29 -#define GPIO_PG14 30 -#define GPIO_PG15 31 -#define GPIO_PH0 32 -#define GPIO_PH1 33 -#define GPIO_PH2 34 -#define GPIO_PH3 35 -#define GPIO_PH4 36 -#define GPIO_PH5 37 -#define GPIO_PH6 38 -#define GPIO_PH7 39 -#define GPIO_PH8 40 -#define GPIO_PH9 41 -#define GPIO_PH10 42 -#define GPIO_PH11 43 -#define GPIO_PH12 44 -#define GPIO_PH13 45 -#define GPIO_PH14 46 -#define GPIO_PH15 47 +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 +#define GPIO_PH9 41 +#define GPIO_PH10 42 +#define GPIO_PH11 43 +#define GPIO_PH12 44 +#define GPIO_PH13 45 +#define GPIO_PH14 46 +#define GPIO_PH15 47 #define PORT_F GPIO_PF0 #define PORT_G GPIO_PG0 diff --git a/arch/blackfin/mach-bf537/include/mach/pll.h b/arch/blackfin/mach-bf537/include/mach/pll.h new file mode 100644 index 00000000000..169c106d0ed --- /dev/null +++ b/arch/blackfin/mach-bf537/include/mach/pll.h @@ -0,0 +1,57 @@ +/* + * Copyright 2005-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PLL_H +#define _MACH_PLL_H + +#include <asm/blackfin.h> +#include <asm/irqflags.h> + +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + hard_local_irq_restore(flags); +} + +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_VR_CTL()) + return; + + flags = hard_local_irq_save(); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + hard_local_irq_restore(flags); +} + +#endif /* _MACH_PLL_H */ diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h index da9760329e4..71d9eaeb579 100644 --- a/arch/blackfin/mach-bf537/include/mach/portmux.h +++ b/arch/blackfin/mach-bf537/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE) /* We additionally handle PORTJ */ +#define MAX_RESOURCES (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE) /* We additionally handle PORTJ */ #define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) #define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) @@ -37,6 +37,7 @@ #define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) #define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF10 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) @@ -135,7 +136,6 @@ P_MDC, \ P_MDIO, 0} - #define P_RMII0 {\ P_MII0_ETxD0, \ P_MII0_ETxD1, \ @@ -148,4 +148,5 @@ P_RMII0_CRS_DV, \ P_MDC, \ P_MDIO, 0} -#endif /* _MACH_PORTMUX_H_ */ + +#endif /* _MACH_PORTMUX_H_ */ |