diff options
Diffstat (limited to 'arch/arm/plat-samsung')
72 files changed, 9740 insertions, 0 deletions
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 486a0d6301e..d552c65fa1b 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -7,11 +7,240 @@ config PLAT_SAMSUNG bool depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX + select NO_IOPORT default y help Base platform code for all Samsung SoC based systems if PLAT_SAMSUNG +# boot configurations + +comment "Boot options" + +config S3C_BOOT_WATCHDOG + bool "S3C Initialisation watchdog" + depends on S3C2410_WATCHDOG + help + Say y to enable the watchdog during the kernel decompression + stage. If the kernel fails to uncompress, then the watchdog + will trigger a reset and the system should restart. + +config S3C_BOOT_ERROR_RESET + bool "S3C Reboot on decompression error" + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + +config S3C_BOOT_UART_FORCE_FIFO + bool "Force UART FIFO on during boot process" + default y + help + Say Y here to force the UART FIFOs on during the kernel + uncompressor + + +config S3C_LOWLEVEL_UART_PORT + int "S3C UART to use for low-level messages" + default 0 + help + Choice of which UART port to use for the low-level messages, + such as the `Uncompressing...` at start time. The value of + this configuration should be between zero and two. The port + must have been initialised by the boot-loader before use. + +# clock options + +config SAMSUNG_CLKSRC + bool + help + Select the clock code for the clksrc implementation + used by newer systems such as the S3C64XX. + +# options for IRQ support + +config SAMSUNG_IRQ_VIC_TIMER + bool + help + Internal configuration to build the VIC timer interrupt code. + +config SAMSUNG_IRQ_UART + bool + help + Internal configuration to build the IRQ UART demux code. + +# options for gpio configuration support + +config SAMSUNG_GPIOLIB_4BIT + bool + help + GPIOlib file contains the 4 bit modification functions for gpio + configuration. GPIOlib shall be compiled only for S3C64XX and S5P + series of processors. + +config S3C_GPIO_CFG_S3C24XX + bool + help + Internal configuration to enable S3C24XX style GPIO configuration + functions. + +config S3C_GPIO_CFG_S3C64XX + bool + help + Internal configuration to enable S3C64XX style GPIO configuration + functions. + +config S5P_GPIO_CFG_S5PC1XX + bool + help + Internal configuration to enable S5PC1XX style GPIO configuration + functions. + +config S3C_GPIO_PULL_UPDOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_DOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_UP + bool + help + Internal configuration to enable the correct GPIO pull helper + +config SAMSUNG_GPIO_EXTRA + int "Number of additional GPIO pins" + default 0 + help + Use additional GPIO space in addition to the GPIO's the SOC + provides. This allows expanding the GPIO space for use with + GPIO expanders. + +config S3C_GPIO_SPACE + int "Space between gpio banks" + default 0 + help + Add a number of spare GPIO entries between each bank for debugging + purposes. This allows any problems where an counter overflows from + one bank to another to be caught, at the expense of using a little + more memory. + +config S3C_GPIO_TRACK + bool + help + Internal configuration option to enable the s3c specific gpio + chip tracking if the platform requires it. + +# ADC driver + +config S3C_ADC + bool "ADC common driver support" + help + Core support for the ADC block found in the Samsung SoC systems + for drivers such as the touchscreen and hwmon to use to share + this resource. + +# device definitions to compile in + +config S3C_DEV_HSMMC + bool + help + Compile in platform device definitions for HSMMC code + +config S3C_DEV_HSMMC1 + bool + help + Compile in platform device definitions for HSMMC channel 1 + +config S3C_DEV_HSMMC2 + bool + help + Compile in platform device definitions for HSMMC channel 2 + +config S3C_DEV_I2C1 + bool + help + Compile in platform device definitions for I2C channel 1 + +config S3C_DEV_FB + bool + help + Compile in platform device definition for framebuffer + +config S3C_DEV_USB_HOST + bool + help + Compile in platform device definition for USB host. + +config S3C_DEV_USB_HSOTG + bool + help + Compile in platform device definition for USB high-speed OtG + +config S3C_DEV_NAND + bool + help + Compile in platform device definition for NAND controller + +config S3C64XX_DEV_SPI + bool + help + Compile in platform device definitions for S3C64XX's type + SPI controllers. + +# DMA + +config S3C_DMA + bool + help + Internal configuration for S3C DMA core + +comment "Power management" + +config SAMSUNG_PM_DEBUG + bool "S3C2410 PM Suspend debug" + depends on PM + help + Say Y here if you want verbose debugging from the PM Suspend and + Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + for more information. + +config S3C_PM_DEBUG_LED_SMDK + bool "SMDK LED suspend/resume debugging" + depends on PM && (MACH_SMDK6410) + help + Say Y here to enable the use of the SMDK LEDs on the baseboard + for debugging of the state of the suspend and resume process. + + Note, this currently only works for S3C64XX based SMDK boards. + +config SAMSUNG_PM_CHECK + bool "S3C2410 PM Suspend Memory CRC" + depends on PM && CRC32 + help + Enable the PM code's memory area checksum over sleep. This option + will generate CRCs of all blocks of memory, and store them before + going to sleep. The blocks are then checked on resume for any + errors. + + Note, this can take several seconds depending on memory size + and CPU speed. + + See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> + +config SAMSUNG_PM_CHECK_CHUNKSIZE + int "S3C2410 PM Suspend CRC Chunksize (KiB)" + depends on PM && SAMSUNG_PM_CHECK + default 64 + help + Set the chunksize in Kilobytes of the CRC for checking memory + corruption over suspend and resume. A smaller value will mean that + the CRC data block will take more memory, but wil identify any + faults with better precision. + + See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 4478b9f7dc3..22c89d08f6e 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -9,3 +9,48 @@ obj-m := obj-n := dummy.o obj- := +# Objects we always build independent of SoC choice + +obj-y += init.o +obj-y += time.o +obj-y += clock.o +obj-y += pwm-clock.o +obj-y += gpio.o +obj-y += gpio-config.o + +obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o +obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o + +obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o +obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o + +# ADC + +obj-$(CONFIG_S3C_ADC) += adc.o + +# devices + +obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o +obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o +obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o +obj-y += dev-i2c0.o +obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o +obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o +obj-y += dev-uart.o +obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o +obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o +obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o + +# DMA support + +obj-$(CONFIG_S3C_DMA) += dma.o + +# PM support + +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += pm-gpio.o +obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o + +# PWM support + +obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c new file mode 100644 index 00000000000..0b5833b9ac5 --- /dev/null +++ b/arch/arm/plat-samsung/adc.c @@ -0,0 +1,474 @@ +/* arch/arm/plat-samsung/adc.c + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> + * + * Samsung ADC device core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <plat/regs-adc.h> +#include <plat/adc.h> + +/* This driver is designed to control the usage of the ADC block between + * the touchscreen and any other drivers that may need to use it, such as + * the hwmon driver. + * + * Priority will be given to the touchscreen driver, but as this itself is + * rate limited it should not starve other requests which are processed in + * order that they are received. + * + * Each user registers to get a client block which uniquely identifies it + * and stores information such as the necessary functions to callback when + * action is required. + */ + +enum s3c_cpu_type { + TYPE_S3C24XX, + TYPE_S3C64XX +}; + +struct s3c_adc_client { + struct platform_device *pdev; + struct list_head pend; + wait_queue_head_t *wait; + + unsigned int nr_samples; + int result; + unsigned char is_ts; + unsigned char channel; + + void (*select_cb)(struct s3c_adc_client *c, unsigned selected); + void (*convert_cb)(struct s3c_adc_client *c, + unsigned val1, unsigned val2, + unsigned *samples_left); +}; + +struct adc_device { + struct platform_device *pdev; + struct platform_device *owner; + struct clk *clk; + struct s3c_adc_client *cur; + struct s3c_adc_client *ts_pend; + void __iomem *regs; + + unsigned int prescale; + + int irq; +}; + +static struct adc_device *adc_dev; + +static LIST_HEAD(adc_pending); + +#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg) + +static inline void s3c_adc_convert(struct adc_device *adc) +{ + unsigned con = readl(adc->regs + S3C2410_ADCCON); + + con |= S3C2410_ADCCON_ENABLE_START; + writel(con, adc->regs + S3C2410_ADCCON); +} + +static inline void s3c_adc_select(struct adc_device *adc, + struct s3c_adc_client *client) +{ + unsigned con = readl(adc->regs + S3C2410_ADCCON); + + client->select_cb(client, 1); + + con &= ~S3C2410_ADCCON_MUXMASK; + con &= ~S3C2410_ADCCON_STDBM; + con &= ~S3C2410_ADCCON_STARTMASK; + + if (!client->is_ts) + con |= S3C2410_ADCCON_SELMUX(client->channel); + + writel(con, adc->regs + S3C2410_ADCCON); +} + +static void s3c_adc_dbgshow(struct adc_device *adc) +{ + adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n", + readl(adc->regs + S3C2410_ADCCON), + readl(adc->regs + S3C2410_ADCTSC), + readl(adc->regs + S3C2410_ADCDLY)); +} + +static void s3c_adc_try(struct adc_device *adc) +{ + struct s3c_adc_client *next = adc->ts_pend; + + if (!next && !list_empty(&adc_pending)) { + next = list_first_entry(&adc_pending, + struct s3c_adc_client, pend); + list_del(&next->pend); + } else + adc->ts_pend = NULL; + + if (next) { + adc_dbg(adc, "new client is %p\n", next); + adc->cur = next; + s3c_adc_select(adc, next); + s3c_adc_convert(adc); + s3c_adc_dbgshow(adc); + } +} + +int s3c_adc_start(struct s3c_adc_client *client, + unsigned int channel, unsigned int nr_samples) +{ + struct adc_device *adc = adc_dev; + unsigned long flags; + + if (!adc) { + printk(KERN_ERR "%s: failed to find adc\n", __func__); + return -EINVAL; + } + + if (client->is_ts && adc->ts_pend) + return -EAGAIN; + + local_irq_save(flags); + + client->channel = channel; + client->nr_samples = nr_samples; + + if (client->is_ts) + adc->ts_pend = client; + else + list_add_tail(&client->pend, &adc_pending); + + if (!adc->cur) + s3c_adc_try(adc); + local_irq_restore(flags); + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_adc_start); + +static void s3c_convert_done(struct s3c_adc_client *client, + unsigned v, unsigned u, unsigned *left) +{ + client->result = v; + wake_up(client->wait); +} + +int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch) +{ + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); + int ret; + + client->convert_cb = s3c_convert_done; + client->wait = &wake; + client->result = -1; + + ret = s3c_adc_start(client, ch, 1); + if (ret < 0) + goto err; + + ret = wait_event_timeout(wake, client->result >= 0, HZ / 2); + if (client->result < 0) { + ret = -ETIMEDOUT; + goto err; + } + + client->convert_cb = NULL; + return client->result; + +err: + return ret; +} +EXPORT_SYMBOL_GPL(s3c_adc_read); + +static void s3c_adc_default_select(struct s3c_adc_client *client, + unsigned select) +{ +} + +struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev, + void (*select)(struct s3c_adc_client *client, + unsigned int selected), + void (*conv)(struct s3c_adc_client *client, + unsigned d0, unsigned d1, + unsigned *samples_left), + unsigned int is_ts) +{ + struct s3c_adc_client *client; + + WARN_ON(!pdev); + + if (!select) + select = s3c_adc_default_select; + + if (!pdev) + return ERR_PTR(-EINVAL); + + client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL); + if (!client) { + dev_err(&pdev->dev, "no memory for adc client\n"); + return ERR_PTR(-ENOMEM); + } + + client->pdev = pdev; + client->is_ts = is_ts; + client->select_cb = select; + client->convert_cb = conv; + + return client; +} +EXPORT_SYMBOL_GPL(s3c_adc_register); + +void s3c_adc_release(struct s3c_adc_client *client) +{ + /* We should really check that nothing is in progress. */ + if (adc_dev->cur == client) + adc_dev->cur = NULL; + if (adc_dev->ts_pend == client) + adc_dev->ts_pend = NULL; + else { + struct list_head *p, *n; + struct s3c_adc_client *tmp; + + list_for_each_safe(p, n, &adc_pending) { + tmp = list_entry(p, struct s3c_adc_client, pend); + if (tmp == client) + list_del(&tmp->pend); + } + } + + if (adc_dev->cur == NULL) + s3c_adc_try(adc_dev); + kfree(client); +} +EXPORT_SYMBOL_GPL(s3c_adc_release); + +static irqreturn_t s3c_adc_irq(int irq, void *pw) +{ + struct adc_device *adc = pw; + struct s3c_adc_client *client = adc->cur; + enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data; + unsigned long flags; + unsigned data0, data1; + + if (!client) { + dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__); + goto exit; + } + + data0 = readl(adc->regs + S3C2410_ADCDAT0); + data1 = readl(adc->regs + S3C2410_ADCDAT1); + adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1); + + client->nr_samples--; + + if (cpu == TYPE_S3C64XX) { + /* S3C64XX ADC resolution is 12-bit */ + data0 &= 0xfff; + data1 &= 0xfff; + } else { + data0 &= 0x3ff; + data1 &= 0x3ff; + } + + if (client->convert_cb) + (client->convert_cb)(client, data0, data1, &client->nr_samples); + + if (client->nr_samples > 0) { + /* fire another conversion for this */ + + client->select_cb(client, 1); + s3c_adc_convert(adc); + } else { + local_irq_save(flags); + (client->select_cb)(client, 0); + adc->cur = NULL; + + s3c_adc_try(adc); + local_irq_restore(flags); + } + +exit: + if (cpu == TYPE_S3C64XX) { + /* Clear ADC interrupt */ + writel(0, adc->regs + S3C64XX_ADCCLRINT); + } + return IRQ_HANDLED; +} + +static int s3c_adc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct adc_device *adc; + struct resource *regs; + int ret; + unsigned tmp; + + adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL); + if (adc == NULL) { + dev_err(dev, "failed to allocate adc_device\n"); + return -ENOMEM; + } + + adc->pdev = pdev; + adc->prescale = S3C2410_ADCCON_PRSCVL(49); + + adc->irq = platform_get_irq(pdev, 1); + if (adc->irq <= 0) { + dev_err(dev, "failed to get adc irq\n"); + ret = -ENOENT; + goto err_alloc; + } + + ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc); + if (ret < 0) { + dev_err(dev, "failed to attach adc irq\n"); + goto err_alloc; + } + + adc->clk = clk_get(dev, "adc"); + if (IS_ERR(adc->clk)) { + dev_err(dev, "failed to get adc clock\n"); + ret = PTR_ERR(adc->clk); + goto err_irq; + } + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(dev, "failed to find registers\n"); + ret = -ENXIO; + goto err_clk; + } + + adc->regs = ioremap(regs->start, resource_size(regs)); + if (!adc->regs) { + dev_err(dev, "failed to map registers\n"); + ret = -ENXIO; + goto err_clk; + } + + clk_enable(adc->clk); + + tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; + if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) { + /* Enable 12-bit ADC resolution */ + tmp |= S3C64XX_ADCCON_RESSEL; + } + writel(tmp, adc->regs + S3C2410_ADCCON); + + dev_info(dev, "attached adc driver\n"); + + platform_set_drvdata(pdev, adc); + adc_dev = adc; + + return 0; + + err_clk: + clk_put(adc->clk); + + err_irq: + free_irq(adc->irq, adc); + + err_alloc: + kfree(adc); + return ret; +} + +static int __devexit s3c_adc_remove(struct platform_device *pdev) +{ + struct adc_device *adc = platform_get_drvdata(pdev); + + iounmap(adc->regs); + free_irq(adc->irq, adc); + clk_disable(adc->clk); + clk_put(adc->clk); + kfree(adc); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct adc_device *adc = platform_get_drvdata(pdev); + u32 con; + + con = readl(adc->regs + S3C2410_ADCCON); + con |= S3C2410_ADCCON_STDBM; + writel(con, adc->regs + S3C2410_ADCCON); + + disable_irq(adc->irq); + clk_disable(adc->clk); + + return 0; +} + +static int s3c_adc_resume(struct platform_device *pdev) +{ + struct adc_device *adc = platform_get_drvdata(pdev); + + clk_enable(adc->clk); + enable_irq(adc->irq); + + writel(adc->prescale | S3C2410_ADCCON_PRSCEN, + adc->regs + S3C2410_ADCCON); + + return 0; +} + +#else +#define s3c_adc_suspend NULL +#define s3c_adc_resume NULL +#endif + +static struct platform_device_id s3c_adc_driver_ids[] = { + { + .name = "s3c24xx-adc", + .driver_data = TYPE_S3C24XX, + }, { + .name = "s3c64xx-adc", + .driver_data = TYPE_S3C64XX, + }, + { } +}; +MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids); + +static struct platform_driver s3c_adc_driver = { + .id_table = s3c_adc_driver_ids, + .driver = { + .name = "s3c-adc", + .owner = THIS_MODULE, + }, + .probe = s3c_adc_probe, + .remove = __devexit_p(s3c_adc_remove), + .suspend = s3c_adc_suspend, + .resume = s3c_adc_resume, +}; + +static int __init adc_init(void) +{ + int ret; + + ret = platform_driver_register(&s3c_adc_driver); + if (ret) + printk(KERN_ERR "%s: failed to add adc driver\n", __func__); + + return ret; +} + +arch_initcall(adc_init); diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c new file mode 100644 index 00000000000..ae8b8507663 --- /dev/null +++ b/arch/arm/plat-samsung/clock-clksrc.c @@ -0,0 +1,212 @@ +/* linux/arch/arm/plat-samsung/clock-clksrc.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/cpu-freq.h> + +static inline struct clksrc_clk *to_clksrc(struct clk *clk) +{ + return container_of(clk, struct clksrc_clk, clk); +} + +static inline u32 bit_mask(u32 shift, u32 nr_bits) +{ + u32 mask = 0xffffffff >> (32 - nr_bits); + + return mask << shift; +} + +static unsigned long s3c_getrate_clksrc(struct clk *clk) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv = __raw_readl(sclk->reg_div.reg); + u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size); + + clkdiv &= mask; + clkdiv >>= sclk->reg_div.shift; + clkdiv++; + + rate /= clkdiv; + return rate; +} + +static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + void __iomem *reg = sclk->reg_div.reg; + unsigned int div; + u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size); + u32 val; + + rate = clk_round_rate(clk, rate); + div = clk_get_rate(clk->parent) / rate; + if (div > (1 << sclk->reg_div.size)) + return -EINVAL; + + val = __raw_readl(reg); + val &= ~mask; + val |= (div - 1) << sclk->reg_div.shift; + __raw_writel(val, reg); + + return 0; +} + +static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + struct clksrc_sources *srcs = sclk->sources; + u32 clksrc = __raw_readl(sclk->reg_src.reg); + u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size); + int src_nr = -1; + int ptr; + + for (ptr = 0; ptr < srcs->nr_sources; ptr++) + if (srcs->sources[ptr] == parent) { + src_nr = ptr; + break; + } + + if (src_nr >= 0) { + clk->parent = parent; + + clksrc &= ~mask; + clksrc |= src_nr << sclk->reg_src.shift; + + __raw_writel(clksrc, sclk->reg_src.reg); + return 0; + } + + return -EINVAL; +} + +static unsigned long s3c_roundrate_clksrc(struct clk *clk, + unsigned long rate) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + unsigned long parent_rate = clk_get_rate(clk->parent); + int max_div = 1 << sclk->reg_div.size; + int div; + + if (rate >= parent_rate) + rate = parent_rate; + else { + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div == 0) + div = 1; + if (div > max_div) + div = max_div; + + rate = parent_rate / div; + } + + return rate; +} + +/* Clock initialisation code */ + +void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce) +{ + struct clksrc_sources *srcs = clk->sources; + u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size); + u32 clksrc; + + if (!clk->reg_src.reg) { + if (!clk->clk.parent) + printk(KERN_ERR "%s: no parent clock specified\n", + clk->clk.name); + return; + } + + clksrc = __raw_readl(clk->reg_src.reg); + clksrc &= mask; + clksrc >>= clk->reg_src.shift; + + if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { + printk(KERN_ERR "%s: bad source %d\n", + clk->clk.name, clksrc); + return; + } + + clk->clk.parent = srcs->sources[clksrc]; + + if (announce) + printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", + clk->clk.name, clk->clk.parent->name, clksrc, + clk_get_rate(&clk->clk)); +} + +static struct clk_ops clksrc_ops = { + .set_parent = s3c_setparent_clksrc, + .get_rate = s3c_getrate_clksrc, + .set_rate = s3c_setrate_clksrc, + .round_rate = s3c_roundrate_clksrc, +}; + +static struct clk_ops clksrc_ops_nodiv = { + .set_parent = s3c_setparent_clksrc, +}; + +static struct clk_ops clksrc_ops_nosrc = { + .get_rate = s3c_getrate_clksrc, + .set_rate = s3c_setrate_clksrc, + .round_rate = s3c_roundrate_clksrc, +}; + +void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size) +{ + int ret; + + for (; size > 0; size--, clksrc++) { + if (!clksrc->reg_div.reg && !clksrc->reg_src.reg) + printk(KERN_ERR "%s: clock %s has no registers set\n", + __func__, clksrc->clk.name); + + /* fill in the default functions */ + + if (!clksrc->clk.ops) { + if (!clksrc->reg_div.reg) + clksrc->clk.ops = &clksrc_ops_nodiv; + else if (!clksrc->reg_src.reg) + clksrc->clk.ops = &clksrc_ops_nosrc; + else + clksrc->clk.ops = &clksrc_ops; + } + + /* setup the clocksource, but do not announce it + * as it may be re-set by the setup routines + * called after the rest of the clocks have been + * registered + */ + s3c_set_clksrc(clksrc, false); + + ret = s3c24xx_register_clock(&clksrc->clk); + + if (ret < 0) { + printk(KERN_ERR "%s: failed to register %s (%d)\n", + __func__, clksrc->clk.name, ret); + } + } +} diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c new file mode 100644 index 00000000000..1b25c9d8c40 --- /dev/null +++ b/arch/arm/plat-samsung/clock.c @@ -0,0 +1,409 @@ +/* linux/arch/arm/plat-s3c24xx/clock.c + * + * Copyright 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX Core clock control support + * + * Based on, and code from linux/arch/arm/mach-versatile/clock.c + ** + ** Copyright (C) 2004 ARM Limited. + ** Written by Deep Blue Solutions Limited. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <plat/cpu-freq.h> + +#include <plat/clock.h> +#include <plat/cpu.h> + +/* clock information */ + +static LIST_HEAD(clocks); + +/* We originally used an mutex here, but some contexts (see resume) + * are calling functions such as clk_set_parent() with IRQs disabled + * causing an BUG to be triggered. + */ +DEFINE_SPINLOCK(clocks_lock); + +/* enable and disable calls for use with the clk struct */ + +static int clk_null_enable(struct clk *clk, int enable) +{ + return 0; +} + +/* Clock API calls */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p; + struct clk *clk = ERR_PTR(-ENOENT); + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; + + spin_lock(&clocks_lock); + + list_for_each_entry(p, &clocks, list) { + if (p->id == idno && + strcmp(id, p->name) == 0 && + try_module_get(p->owner)) { + clk = p; + break; + } + } + + /* check for the case where a device was supplied, but the + * clock that was being searched for is not device specific */ + + if (IS_ERR(clk)) { + list_for_each_entry(p, &clocks, list) { + if (p->id == -1 && strcmp(id, p->name) == 0 && + try_module_get(p->owner)) { + clk = p; + break; + } + } + } + + spin_unlock(&clocks_lock); + return clk; +} + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} + +int clk_enable(struct clk *clk) +{ + if (IS_ERR(clk) || clk == NULL) + return -EINVAL; + + clk_enable(clk->parent); + + spin_lock(&clocks_lock); + + if ((clk->usage++) == 0) + (clk->enable)(clk, 1); + + spin_unlock(&clocks_lock); + return 0; +} + +void clk_disable(struct clk *clk) +{ + if (IS_ERR(clk) || clk == NULL) + return; + + spin_lock(&clocks_lock); + + if ((--clk->usage) == 0) + (clk->enable)(clk, 0); + + spin_unlock(&clocks_lock); + clk_disable(clk->parent); +} + + +unsigned long clk_get_rate(struct clk *clk) +{ + if (IS_ERR(clk)) + return 0; + + if (clk->rate != 0) + return clk->rate; + + if (clk->ops != NULL && clk->ops->get_rate != NULL) + return (clk->ops->get_rate)(clk); + + if (clk->parent != NULL) + return clk_get_rate(clk->parent); + + return clk->rate; +} + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate) + return (clk->ops->round_rate)(clk, rate); + + return rate; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret; + + if (IS_ERR(clk)) + return -EINVAL; + + /* We do not default just do a clk->rate = rate as + * the clock may have been made this way by choice. + */ + + WARN_ON(clk->ops == NULL); + WARN_ON(clk->ops && clk->ops->set_rate == NULL); + + if (clk->ops == NULL || clk->ops->set_rate == NULL) + return -EINVAL; + + spin_lock(&clocks_lock); + ret = (clk->ops->set_rate)(clk, rate); + spin_unlock(&clocks_lock); + + return ret; +} + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = 0; + + if (IS_ERR(clk)) + return -EINVAL; + + spin_lock(&clocks_lock); + + if (clk->ops && clk->ops->set_parent) + ret = (clk->ops->set_parent)(clk, parent); + + spin_unlock(&clocks_lock); + + return ret; +} + +EXPORT_SYMBOL(clk_get); +EXPORT_SYMBOL(clk_put); +EXPORT_SYMBOL(clk_enable); +EXPORT_SYMBOL(clk_disable); +EXPORT_SYMBOL(clk_get_rate); +EXPORT_SYMBOL(clk_round_rate); +EXPORT_SYMBOL(clk_set_rate); +EXPORT_SYMBOL(clk_get_parent); +EXPORT_SYMBOL(clk_set_parent); + +/* base clocks */ + +int clk_default_setrate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} + +struct clk_ops clk_ops_def_setrate = { + .set_rate = clk_default_setrate, +}; + +struct clk clk_xtal = { + .name = "xtal", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_ext = { + .name = "ext", + .id = -1, +}; + +struct clk clk_epll = { + .name = "epll", + .id = -1, +}; + +struct clk clk_mpll = { + .name = "mpll", + .id = -1, + .ops = &clk_ops_def_setrate, +}; + +struct clk clk_upll = { + .name = "upll", + .id = -1, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_f = { + .name = "fclk", + .id = -1, + .rate = 0, + .parent = &clk_mpll, + .ctrlbit = 0, +}; + +struct clk clk_h = { + .name = "hclk", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .ops = &clk_ops_def_setrate, +}; + +struct clk clk_p = { + .name = "pclk", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .ops = &clk_ops_def_setrate, +}; + +struct clk clk_usb_bus = { + .name = "usb-bus", + .id = -1, + .rate = 0, + .parent = &clk_upll, +}; + + +struct clk s3c24xx_uclk = { + .name = "uclk", + .id = -1, +}; + +/* initialise the clock system */ + +/** + * s3c24xx_register_clock() - register a clock + * @clk: The clock to register + * + * Add the specified clock to the list of clocks known by the system. + */ +int s3c24xx_register_clock(struct clk *clk) +{ + if (clk->enable == NULL) + clk->enable = clk_null_enable; + + /* add to the list of available clocks */ + + /* Quick check to see if this clock has already been registered. */ + BUG_ON(clk->list.prev != clk->list.next); + + spin_lock(&clocks_lock); + list_add(&clk->list, &clocks); + spin_unlock(&clocks_lock); + + return 0; +} + +/** + * s3c24xx_register_clocks() - register an array of clock pointers + * @clks: Pointer to an array of struct clk pointers + * @nr_clks: The number of clocks in the @clks array. + * + * Call s3c24xx_register_clock() for all the clock pointers contained + * in the @clks list. Returns the number of failures. + */ +int s3c24xx_register_clocks(struct clk **clks, int nr_clks) +{ + int fails = 0; + + for (; nr_clks > 0; nr_clks--, clks++) { + if (s3c24xx_register_clock(*clks) < 0) { + struct clk *clk = *clks; + printk(KERN_ERR "%s: failed to register %p: %s\n", + __func__, clk, clk->name); + fails++; + } + } + + return fails; +} + +/** + * s3c_register_clocks() - register an array of clocks + * @clkp: Pointer to the first clock in the array. + * @nr_clks: Number of clocks to register. + * + * Call s3c24xx_register_clock() on the @clkp array given, printing an + * error if it fails to register the clock (unlikely). + */ +void __init s3c_register_clocks(struct clk *clkp, int nr_clks) +{ + int ret; + + for (; nr_clks > 0; nr_clks--, clkp++) { + ret = s3c24xx_register_clock(clkp); + + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } +} + +/* initalise all the clocks */ + +int __init s3c24xx_register_baseclocks(unsigned long xtal) +{ + printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n"); + + clk_xtal.rate = xtal; + + /* register our clocks */ + + if (s3c24xx_register_clock(&clk_xtal) < 0) + printk(KERN_ERR "failed to register master xtal\n"); + + if (s3c24xx_register_clock(&clk_mpll) < 0) + printk(KERN_ERR "failed to register mpll clock\n"); + + if (s3c24xx_register_clock(&clk_upll) < 0) + printk(KERN_ERR "failed to register upll clock\n"); + + if (s3c24xx_register_clock(&clk_f) < 0) + printk(KERN_ERR "failed to register cpu fclk\n"); + + if (s3c24xx_register_clock(&clk_h) < 0) + printk(KERN_ERR "failed to register cpu hclk\n"); + + if (s3c24xx_register_clock(&clk_p) < 0) + printk(KERN_ERR "failed to register cpu pclk\n"); + + return 0; +} + diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c new file mode 100644 index 00000000000..a90198fc4b0 --- /dev/null +++ b/arch/arm/plat-samsung/dev-fb.c @@ -0,0 +1,73 @@ +/* linux/arch/arm/plat-s3c/dev-fb.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for framebuffer device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/fb.h> + +#include <mach/irqs.h> +#include <mach/map.h> +#include <mach/regs-fb.h> + +#include <plat/fb.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_fb_resource[] = { + [0] = { + .start = S3C_PA_FB, + .end = S3C_PA_FB + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_LCD_VSYNC, + .end = IRQ_LCD_VSYNC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_LCD_FIFO, + .end = IRQ_LCD_FIFO, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_LCD_SYSTEM, + .end = IRQ_LCD_SYSTEM, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_fb = { + .name = "s3c-fb", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_fb_resource), + .resource = s3c_fb_resource, + .dev.dma_mask = &s3c_device_fb.dev.coherent_dma_mask, + .dev.coherent_dma_mask = 0xffffffffUL, +}; + +void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd) +{ + struct s3c_fb_platdata *npd; + + if (!pd) { + printk(KERN_ERR "%s: no platform data\n", __func__); + return; + } + + npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_fb.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c new file mode 100644 index 00000000000..4c05b39810e --- /dev/null +++ b/arch/arm/plat-samsung/dev-hsmmc.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-hsmmc.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for hsmmc devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc_resource[] = { + [0] = { + .start = S3C_PA_HSMMC0, + .end = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HSMMC0, + .end = IRQ_HSMMC0, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc0 = { + .name = "s3c-sdhci", + .id = 0, + .num_resources = ARRAY_SIZE(s3c_hsmmc_resource), + .resource = s3c_hsmmc_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc0_def_platdata, + }, +}; + +void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c new file mode 100644 index 00000000000..e49bc4cd0ee --- /dev/null +++ b/arch/arm/plat-samsung/dev-hsmmc1.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-hsmmc1.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for hsmmc device 1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc1_resource[] = { + [0] = { + .start = S3C_PA_HSMMC1, + .end = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HSMMC1, + .end = IRQ_HSMMC1, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc1 = { + .name = "s3c-sdhci", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource), + .resource = s3c_hsmmc1_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc1_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc1_def_platdata, + }, +}; + +void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c new file mode 100644 index 00000000000..824580bc0e0 --- /dev/null +++ b/arch/arm/plat-samsung/dev-hsmmc2.c @@ -0,0 +1,69 @@ +/* linux/arch/arm/plat-s3c/dev-hsmmc2.c + * + * Copyright (c) 2009 Samsung Electronics + * Copyright (c) 2009 Maurus Cuelenaere + * + * Based on arch/arm/plat-s3c/dev-hsmmc1.c + * original file Copyright (c) 2008 Simtec Electronics + * + * S3C series device definition for hsmmc device 2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc2_resource[] = { + [0] = { + .start = S3C_PA_HSMMC2, + .end = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HSMMC2, + .end = IRQ_HSMMC2, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc2 = { + .name = "s3c-sdhci", + .id = 2, + .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource), + .resource = s3c_hsmmc2_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc2_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc2_def_platdata, + }, +}; + +void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c new file mode 100644 index 00000000000..4c761529b94 --- /dev/null +++ b/arch/arm/plat-samsung/dev-i2c0.c @@ -0,0 +1,71 @@ +/* linux/arch/arm/plat-s3c/dev-i2c0.c + * + * Copyright 2008-2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for i2c device 0 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC, + .end = S3C_PA_IIC + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC, + .end = IRQ_IIC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c0 = { + .name = "s3c2410-i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .id = 0, +#else + .id = -1, +#endif + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data0 __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data0; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c0_cfg_gpio; + + s3c_device_i2c0.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c new file mode 100644 index 00000000000..d44f7911050 --- /dev/null +++ b/arch/arm/plat-samsung/dev-i2c1.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-i2c1.c + * + * Copyright 2008-2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for i2c device 1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC1, + .end = S3C_PA_IIC1 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC1, + .end = IRQ_IIC1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c1 = { + .name = "s3c2410-i2c", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data1 __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data1; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c1_cfg_gpio; + + s3c_device_i2c1.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c new file mode 100644 index 00000000000..a52fb6cf618 --- /dev/null +++ b/arch/arm/plat-samsung/dev-nand.c @@ -0,0 +1,129 @@ +/* + * S3C series device definition for nand device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <mach/map.h> +#include <plat/devs.h> +#include <plat/nand.h> + +static struct resource s3c_nand_resource[] = { + [0] = { + .start = S3C_PA_NAND, + .end = S3C_PA_NAND + SZ_1M, + .flags = IORESOURCE_MEM, + } +}; + +struct platform_device s3c_device_nand = { + .name = "s3c2410-nand", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_nand_resource), + .resource = s3c_nand_resource, +}; + +EXPORT_SYMBOL(s3c_device_nand); + +/** + * s3c_nand_copy_set() - copy nand set data + * @set: The new structure, directly copied from the old. + * + * Copy all the fields from the NAND set field from what is probably __initdata + * to new kernel memory. The code returns 0 if the copy happened correctly or + * an error code for the calling function to display. + * + * Note, we currently do not try and look to see if we've already copied the + * data in a previous set. + */ +static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set) +{ + void *ptr; + int size; + + size = sizeof(struct mtd_partition) * set->nr_partitions; + if (size) { + ptr = kmemdup(set->partitions, size, GFP_KERNEL); + set->partitions = ptr; + + if (!ptr) + return -ENOMEM; + } + + if (set->nr_map && set->nr_chips) { + size = sizeof(int) * set->nr_chips; + ptr = kmemdup(set->nr_map, size, GFP_KERNEL); + set->nr_map = ptr; + + if (!ptr) + return -ENOMEM; + } + + if (set->ecc_layout) { + ptr = kmemdup(set->ecc_layout, + sizeof(struct nand_ecclayout), GFP_KERNEL); + set->ecc_layout = ptr; + + if (!ptr) + return -ENOMEM; + } + + return 0; +} + +void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) +{ + struct s3c2410_platform_nand *npd; + int size; + int ret; + + /* note, if we get a failure in allocation, we simply drop out of the + * function. If there is so little memory available at initialisation + * time then there is little chance the system is going to run. + */ + + npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL); + if (!npd) { + printk(KERN_ERR "%s: failed copying platform data\n", __func__); + return; + } + + /* now see if we need to copy any of the nand set data */ + + size = sizeof(struct s3c2410_nand_set) * npd->nr_sets; + if (size) { + struct s3c2410_nand_set *from = npd->sets; + struct s3c2410_nand_set *to; + int i; + + to = kmemdup(from, size, GFP_KERNEL); + npd->sets = to; /* set, even if we failed */ + + if (!to) { + printk(KERN_ERR "%s: no memory for sets\n", __func__); + return; + } + + for (i = 0; i < npd->nr_sets; i++) { + ret = s3c_nand_copy_set(to); + if (ret) { + printk(KERN_ERR "%s: failed to copy set %d\n", + __func__, i); + return; + } + to++; + } + } + + s3c_device_nand.dev.platform_data = npd; +} + +EXPORT_SYMBOL_GPL(s3c_nand_set_platdata); diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c new file mode 100644 index 00000000000..3776cd95245 --- /dev/null +++ b/arch/arm/plat-samsung/dev-uart.c @@ -0,0 +1,44 @@ +/* linux/arch/arm/plat-samsung/dev-uart.c + * originally from arch/arm/plat-s3c24xx/devs.c + *x + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Base S3C24XX platform device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +/* uart devices */ + +static struct platform_device s3c24xx_uart_device0 = { + .id = 0, +}; + +static struct platform_device s3c24xx_uart_device1 = { + .id = 1, +}; + +static struct platform_device s3c24xx_uart_device2 = { + .id = 2, +}; + +static struct platform_device s3c24xx_uart_device3 = { + .id = 3, +}; + +struct platform_device *s3c24xx_uart_src[4] = { + &s3c24xx_uart_device0, + &s3c24xx_uart_device1, + &s3c24xx_uart_device2, + &s3c24xx_uart_device3, +}; + +struct platform_device *s3c24xx_uart_devs[4] = { +}; diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c new file mode 100644 index 00000000000..33a844ab691 --- /dev/null +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c @@ -0,0 +1,48 @@ +/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for USB high-speed UDC/OtG block + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + +static struct resource s3c_usb_hsotg_resources[] = { + [0] = { + .start = S3C_PA_USB_HSOTG, + .end = S3C_PA_USB_HSOTG + 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_OTG, + .end = IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); + +struct platform_device s3c_device_usb_hsotg = { + .name = "s3c-hsotg", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources), + .resource = s3c_usb_hsotg_resources, + .dev = { + .dma_mask = &s3c_hsotg_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c new file mode 100644 index 00000000000..88165657fa5 --- /dev/null +++ b/arch/arm/plat-samsung/dev-usb.c @@ -0,0 +1,69 @@ +/* linux/arch/arm/plat-s3c/dev-usb.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for USB host + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> +#include <plat/usb-control.h> + +static struct resource s3c_usb_resource[] = { + [0] = { + .start = S3C_PA_USBHOST, + .end = S3C_PA_USBHOST + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBH, + .end = IRQ_USBH, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_usb_dmamask = 0xffffffffUL; + +struct platform_device s3c_device_ohci = { + .name = "s3c2410-ohci", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_usb_resource), + .resource = s3c_usb_resource, + .dev = { + .dma_mask = &s3c_device_usb_dmamask, + .coherent_dma_mask = 0xffffffffUL + } +}; + +EXPORT_SYMBOL(s3c_device_ohci); + +/** + * s3c_ohci_set_platdata - initialise OHCI device platform data + * @info: The platform data. + * + * This call copies the @info passed in and sets the device .platform_data + * field to that copy. The @info is copied so that the original can be marked + * __initdata. + */ +void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info) +{ + struct s3c2410_hcd_info *npd; + + npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_ohci.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c new file mode 100644 index 00000000000..cb459dd9545 --- /dev/null +++ b/arch/arm/plat-samsung/dma.c @@ -0,0 +1,84 @@ +/* linux/arch/arm/plat-samsung/dma.c + * + * Copyright (c) 2003-2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C DMA core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct s3c2410_dma_buf; + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> + +#include <mach/dma.h> +#include <mach/irqs.h> + +/* dma channel state information */ +struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; +struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX]; + +/* s3c_dma_lookup_channel + * + * change the dma channel number given into a real dma channel id +*/ + +struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel) +{ + if (channel & DMACH_LOW_LEVEL) + return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; + else + return s3c_dma_chan_map[channel]; +} + +/* do we need to protect the settings of the fields from + * irq? +*/ + +int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn); + + chan->op_fn = rtn; + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_set_opfn); + +int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + if (chan == NULL) + return -EINVAL; + + pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn); + + chan->callback_fn = rtn; + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); + +int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) +{ + struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); + + if (chan == NULL) + return -EINVAL; + + chan->flags = flags; + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_setflags); diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c new file mode 100644 index 00000000000..44a84e89654 --- /dev/null +++ b/arch/arm/plat-samsung/gpio-config.c @@ -0,0 +1,166 @@ +/* linux/arch/arm/plat-s3c/gpio-config.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO configuration core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + int offset; + int ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_setcfg(chip, offset, config); + local_irq_restore(flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_cfgpin); + +int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + int offset, ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_setpull(chip, offset, pull); + local_irq_restore(flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_setpull); + +#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX +int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off; + u32 con; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + + /* Map output to 0, and SFN2 to 1 */ + cfg -= 1; + if (cfg > 1) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x1 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off * 2; + u32 con; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + if (cfg > 3) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x3 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} +#endif + +#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX +int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} +#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ + +#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN +int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup; + + pup = __raw_readl(reg); + pup &= ~(3 << shift); + pup |= pull << shift; + __raw_writel(pup, reg); + + return 0; +} + +s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup = __raw_readl(reg); + + pup >>= shift; + pup &= 0x3; + return (__force s3c_gpio_pull_t)pup; +} +#endif diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c new file mode 100644 index 00000000000..28d2ab8a08d --- /dev/null +++ b/arch/arm/plat-samsung/gpio.c @@ -0,0 +1,156 @@ +/* linux/arch/arm/plat-s3c/gpio.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <plat/gpio-core.h> + +#ifdef CONFIG_S3C_GPIO_TRACK +struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip) +{ + unsigned int gpn; + int i; + + gpn = chip->chip.base; + for (i = 0; i < chip->chip.ngpio; i++, gpn++) { + BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); + s3c_gpios[gpn] = chip; + } +} +#endif /* CONFIG_S3C_GPIO_TRACK */ + +/* Default routines for controlling GPIO, based on the original S3C24XX + * GPIO functions which deal with the case where each gpio bank of the + * chip is as following: + * + * base + 0x00: Control register, 2 bits per gpio + * gpio n: 2 bits starting at (2*n) + * 00 = input, 01 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n +*/ + +static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long con; + + local_irq_save(flags); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + + __raw_writel(con, base + 0x00); + + local_irq_restore(flags); + return 0; +} + +static int s3c_gpiolib_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + local_irq_save(flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + con |= 1 << (offset * 2); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); + return 0; +} + +static void s3c_gpiolib_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + + local_irq_save(flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); +} + +static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + unsigned long val; + + val = __raw_readl(ourchip->base + 0x04); + val >>= offset; + val &= 1; + + return val; +} + +__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) +{ + struct gpio_chip *gc = &chip->chip; + int ret; + + BUG_ON(!chip->base); + BUG_ON(!gc->label); + BUG_ON(!gc->ngpio); + + if (!gc->direction_input) + gc->direction_input = s3c_gpiolib_input; + if (!gc->direction_output) + gc->direction_output = s3c_gpiolib_output; + if (!gc->set) + gc->set = s3c_gpiolib_set; + if (!gc->get) + gc->get = s3c_gpiolib_get; + +#ifdef CONFIG_PM + if (chip->pm != NULL) { + if (!chip->pm->save || !chip->pm->resume) + printk(KERN_ERR "gpio: %s has missing PM functions\n", + gc->label); + } else + printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); +#endif + + /* gpiochip_add() prints own failure message on error. */ + ret = gpiochip_add(gc); + if (ret >= 0) + s3c_gpiolib_track(chip); +} diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c new file mode 100644 index 00000000000..8a8ba8bc1d9 --- /dev/null +++ b/arch/arm/plat-samsung/gpiolib.c @@ -0,0 +1,199 @@ +/* arch/arm/plat-samsung/gpiolib.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * SAMSUNG - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <mach/gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +#ifndef DEBUG_GPIO +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +/* The samsung_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of + * the output. +*/ + +static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + GPIOCON_OFF); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, base + GPIOCON_OFF); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we + * store the 'base + 0x4' address so that these routines see the data + * register at ourchip->base + 0x04. + */ + +static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + if (con_offset > 7) + con_offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit_input; + chip->chip.direction_output = samsung_gpiolib_4bit_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit2_input; + chip->chip.direction_output = samsung_gpiolib_4bit2_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit(chip); + s3c_gpiolib_add(chip); + } +} + +void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit2(chip); + s3c_gpiolib_add(chip); + } +} diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h new file mode 100644 index 00000000000..e8382c7be10 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/adc.h @@ -0,0 +1,35 @@ +/* arch/arm/plat-samsung/include/plat/adc.h + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simnte.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C ADC driver information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_ADC_H +#define __ASM_PLAT_ADC_H __FILE__ + +struct s3c_adc_client; + +extern int s3c_adc_start(struct s3c_adc_client *client, + unsigned int channel, unsigned int nr_samples); + +extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch); + +extern struct s3c_adc_client * + s3c_adc_register(struct platform_device *pdev, + void (*select)(struct s3c_adc_client *client, + unsigned selected), + void (*conv)(struct s3c_adc_client *client, + unsigned d0, unsigned d1, + unsigned *samples_left), + unsigned int is_ts); + +extern void s3c_adc_release(struct s3c_adc_client *client); + +#endif /* __ASM_PLAT_ADC_H */ diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h new file mode 100644 index 00000000000..e32f9edfd4b --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/audio.h @@ -0,0 +1,25 @@ +/* arch/arm/plat-samsung/include/plat/audio.h + * + * Copyright (c) 2009 Samsung Electronics Co. Ltd + * Author: Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* The machine init code calls s3c*_ac97_setup_gpio with + * one of these defines in order to select appropriate bank + * of GPIO for AC97 pins + */ +#define S3C64XX_AC97_GPD 0 +#define S3C64XX_AC97_GPE 1 +extern void s3c64xx_ac97_setup_gpio(int); + +/** + * struct s3c_audio_pdata - common platform data for audio device drivers + * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode + */ +struct s3c_audio_pdata { + int (*cfg_gpio)(struct platform_device *); +}; diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h new file mode 100644 index 00000000000..50a8ca7c376 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/clock-clksrc.h @@ -0,0 +1,83 @@ +/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h + * + * Parts taken from arch/arm/plat-s3c64xx/clock.c + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Copyright 2009 Ben Dooks <ben-linux@fluff.org> + * Copyright 2009 Harald Welte + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/** + * struct clksrc_sources - list of sources for a given clock + * @sources: array of pointers to clocks + * @nr_sources: The size of @sources + */ +struct clksrc_sources { + unsigned int nr_sources; + struct clk **sources; +}; + +/** + * struct clksrc_reg - register definition for clock control bits + * @reg: pointer to the register in virtual memory. + * @shift: the shift in bits to where the bitfield is. + * @size: the size in bits of the bitfield. + * + * This specifies the size and position of the bits we are interested + * in within the register specified by @reg. + */ +struct clksrc_reg { + void __iomem *reg; + unsigned short shift; + unsigned short size; +}; + +/** + * struct clksrc_clk - class of clock for newer style samsung devices. + * @clk: the standard clock representation + * @sources: the sources for this clock + * @reg_src: the register definition for selecting the clock's source + * @reg_div: the register definition for the clock's output divisor + * + * This clock implements the features required by the newer SoCs where + * the standard clock block provides an input mux and a post-mux divisor + * to provide the periperhal's clock. + * + * The array of @sources provides the mapping of mux position to the + * clock, and @reg_src shows the code where to modify to change the mux + * position. The @reg_div defines how to change the divider settings on + * the output. + */ +struct clksrc_clk { + struct clk clk; + struct clksrc_sources *sources; + + struct clksrc_reg reg_src; + struct clksrc_reg reg_div; +}; + +/** + * s3c_set_clksrc() - setup the clock from the register settings + * @clk: The clock to setup. + * @announce: true to announce the setting to printk(). + * + * Setup the clock from the current register settings, for when the + * kernel boots or if it is resuming from a possibly unknown state. + */ +extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce); + +/** + * s3c_register_clksrc() register clocks from an array of clksrc clocks + * @srcs: The array of clocks to register + * @size: The size of the @srcs array. + * + * Initialise and register the array of clocks described by @srcs. + */ +extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size); diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h new file mode 100644 index 00000000000..60b62692ac7 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -0,0 +1,115 @@ +/* linux/arch/arm/plat-s3c/include/plat/clock.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Written by Ben Dooks, <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/spinlock.h> + +struct clk; + +/** + * struct clk_ops - standard clock operations + * @set_rate: set the clock rate, see clk_set_rate(). + * @get_rate: get the clock rate, see clk_get_rate(). + * @round_rate: round a given clock rate, see clk_round_rate(). + * @set_parent: set the clock's parent, see clk_set_parent(). + * + * Group the common clock implementations together so that we + * don't have to keep setting the same fiels again. We leave + * enable in struct clk. + * + * Adding an extra layer of indirection into the process should + * not be a problem as it is unlikely these operations are going + * to need to be called quickly. + */ +struct clk_ops { + int (*set_rate)(struct clk *c, unsigned long rate); + unsigned long (*get_rate)(struct clk *c); + unsigned long (*round_rate)(struct clk *c, unsigned long rate); + int (*set_parent)(struct clk *c, struct clk *parent); +}; + +struct clk { + struct list_head list; + struct module *owner; + struct clk *parent; + const char *name; + int id; + int usage; + unsigned long rate; + unsigned long ctrlbit; + + struct clk_ops *ops; + int (*enable)(struct clk *, int enable); +}; + +/* other clocks which may be registered by board support */ + +extern struct clk s3c24xx_dclk0; +extern struct clk s3c24xx_dclk1; +extern struct clk s3c24xx_clkout0; +extern struct clk s3c24xx_clkout1; +extern struct clk s3c24xx_uclk; + +extern struct clk clk_usb_bus; + +/* core clock support */ + +extern struct clk clk_f; +extern struct clk clk_h; +extern struct clk clk_p; +extern struct clk clk_mpll; +extern struct clk clk_upll; +extern struct clk clk_epll; +extern struct clk clk_xtal; +extern struct clk clk_ext; + +/* S3C64XX specific clocks */ +extern struct clk clk_h2; +extern struct clk clk_27m; +extern struct clk clk_48m; + +extern int clk_default_setrate(struct clk *clk, unsigned long rate); +extern struct clk_ops clk_ops_def_setrate; + +/* exports for arch/arm/mach-s3c2410 + * + * Please DO NOT use these outside of arch/arm/mach-s3c2410 +*/ + +extern spinlock_t clocks_lock; + +extern int s3c2410_clkcon_enable(struct clk *clk, int enable); + +extern int s3c24xx_register_clock(struct clk *clk); +extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); + +extern void s3c_register_clocks(struct clk *clk, int nr_clks); + +extern int s3c24xx_register_baseclocks(unsigned long xtal); + +extern void s5p_register_clocks(unsigned long xtal_freq); + +extern void s3c24xx_setup_clocks(unsigned long fclk, + unsigned long hclk, + unsigned long pclk); + +extern void s3c2410_setup_clocks(void); +extern void s3c2412_setup_clocks(void); +extern void s3c244x_setup_clocks(void); +extern void s3c2443_setup_clocks(void); + +/* S3C64XX specific functions and clocks */ + +extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); + +/* Init for pwm clock code */ + +extern void s3c_pwmclk_init(void); + diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h new file mode 100644 index 00000000000..80c4a809c72 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h @@ -0,0 +1,145 @@ +/* arch/arm/plat-samsung/include/plat/cpu-freq.h + * + * Copyright (c) 2006-2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C CPU frequency scaling support - driver and board + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/cpufreq.h> + +struct s3c_cpufreq_info; +struct s3c_cpufreq_board; +struct s3c_iotimings; + +/** + * struct s3c_freq - frequency information (mainly for core drivers) + * @fclk: The FCLK frequency in Hz. + * @armclk: The ARMCLK frequency in Hz. + * @hclk_tns: HCLK cycle time in 10ths of nano-seconds. + * @hclk: The HCLK frequency in Hz. + * @pclk: The PCLK frequency in Hz. + * + * This contains the frequency information about the current configuration + * mainly for the core drivers to ensure we do not end up passing about + * a large number of parameters. + * + * The @hclk_tns field is a useful cache for the parts of the drivers that + * need to calculate IO timings and suchlike. + */ +struct s3c_freq { + unsigned long fclk; + unsigned long armclk; + unsigned long hclk_tns; /* in 10ths of ns */ + unsigned long hclk; + unsigned long pclk; +}; + +/** + * struct s3c_cpufreq_freqs - s3c cpufreq notification information. + * @freqs: The cpufreq setting information. + * @old: The old clock settings. + * @new: The new clock settings. + * @pll_changing: Set if the PLL is changing. + * + * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the + * notification can use this information that is not provided by just + * having the core frequency alone. + * + * The pll_changing flag is used to indicate if the PLL itself is + * being set during this change. This is important as the clocks + * will temporarily be set to the XTAL clock during this time, so + * drivers may want to close down their output during this time. + * + * Note, this is not being used by any current drivers and therefore + * may be removed in the future. + */ +struct s3c_cpufreq_freqs { + struct cpufreq_freqs freqs; + struct s3c_freq old; + struct s3c_freq new; + + unsigned int pll_changing:1; +}; + +#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) + +/** + * struct s3c_clkdivs - clock divisor information + * @p_divisor: Divisor from FCLK to PCLK. + * @h_divisor: Divisor from FCLK to HCLK. + * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs). + * @dvs: Non-zero if using DVS mode for ARMCLK. + * + * Divisor settings for the core clocks. + */ +struct s3c_clkdivs { + int p_divisor; + int h_divisor; + int arm_divisor; + unsigned char dvs; +}; + +#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) + +/** + * struct s3c_pllval - PLL value entry. + * @freq: The frequency for this entry in Hz. + * @pll_reg: The PLL register setting for this PLL value. + */ +struct s3c_pllval { + unsigned long freq; + unsigned long pll_reg; +}; + +/** + * struct s3c_cpufreq_board - per-board cpu frequency informatin + * @refresh: The SDRAM refresh period in nanoseconds. + * @auto_io: Set if the IO timing settings should be generated from the + * initialisation time hardware registers. + * @need_io: Set if the board has external IO on any of the chipselect + * lines that will require the hardware timing registers to be + * updated on a clock change. + * @max: The maxium frequency limits for the system. Any field that + * is left at zero will use the CPU's settings. + * + * This contains the board specific settings that affect how the CPU + * drivers chose settings. These include the memory refresh and IO + * timing information. + * + * Registration depends on the driver being used, the ARMCLK only + * implementation does not currently need this but the older style + * driver requires this to be available. + */ +struct s3c_cpufreq_board { + unsigned int refresh; + unsigned int auto_io:1; /* automatically init io timings. */ + unsigned int need_io:1; /* set if needs io timing support. */ + + /* any non-zero field in here is taken as an upper limit. */ + struct s3c_freq max; /* frequency limits */ +}; + +/* Things depending on frequency scaling. */ +#ifdef CONFIG_CPU_FREQ_S3C +#define __init_or_cpufreq +#else +#define __init_or_cpufreq __init +#endif + +/* Board functions */ + +#ifdef CONFIG_CPU_FREQ_S3C +extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); +#else + +static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + return 0; +} +#endif /* CONFIG_CPU_FREQ_S3C */ diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h new file mode 100644 index 00000000000..d316b4a579f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -0,0 +1,84 @@ +/* linux/arch/arm/plat-samsung/include/plat/cpu.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for S3C24XX CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* todo - fix when rmk changes iodescs to use `void __iomem *` */ + +#ifndef __SAMSUNG_PLAT_CPU_H +#define __SAMSUNG_PLAT_CPU_H + +#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } + +#ifndef MHZ +#define MHZ (1000*1000) +#endif + +#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000) + +/* forward declaration */ +struct s3c24xx_uart_resources; +struct platform_device; +struct s3c2410_uartcfg; +struct map_desc; + +/* per-cpu initialisation function table. */ + +struct cpu_table { + unsigned long idcode; + unsigned long idmask; + void (*map_io)(void); + void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no); + void (*init_clocks)(int xtal); + int (*init)(void); + const char *name; +}; + +extern void s3c_init_cpu(unsigned long idcode, + struct cpu_table *cpus, unsigned int cputab_size); + +/* core initialisation functions */ + +extern void s3c24xx_init_irq(void); +extern void s3c64xx_init_irq(u32 vic0, u32 vic1); +extern void s5p_init_irq(u32 *vic, u32 num_vic); + +extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); +extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); +extern void s5p_init_io(struct map_desc *mach_desc, + int size, void __iomem *cpuid_addr); + +extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c24xx_init_clocks(int xtal); + +extern void s3c24xx_init_uartdevs(char *name, + struct s3c24xx_uart_resources *res, + struct s3c2410_uartcfg *cfg, int no); + +/* timer for 2410/2440 */ + +struct sys_timer; +extern struct sys_timer s3c24xx_timer; + +/* system device classes */ + +extern struct sysdev_class s3c2410_sysclass; +extern struct sysdev_class s3c2410a_sysclass; +extern struct sysdev_class s3c2412_sysclass; +extern struct sysdev_class s3c2440_sysclass; +extern struct sysdev_class s3c2442_sysclass; +extern struct sysdev_class s3c2443_sysclass; +extern struct sysdev_class s3c6410_sysclass; +extern struct sysdev_class s3c64xx_sysclass; + +extern void (*s5pc1xx_idle)(void); + +#endif diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S new file mode 100644 index 00000000000..dc6efd90e8f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -0,0 +1,87 @@ +/* arch/arm/plat-samsung/include/plat/debug-macro.S + * + * Copyright 2005, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <plat/regs-serial.h> + +/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */ + + .macro fifo_level_s5pv210 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S5PV210_UFSTAT_TXMASK + .endm + + .macro fifo_full_s5pv210 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S5PV210_UFSTAT_TXFULL + .endm + +/* The S3C2440 implementations are used by default as they are the + * most widely re-used */ + + .macro fifo_level_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S3C2440_UFSTAT_TXMASK + .endm + +#ifndef fifo_level +#define fifo_level fifo_level_s3c2440 +#endif + + .macro fifo_full_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S3C2440_UFSTAT_TXFULL + .endm + +#ifndef fifo_full +#define fifo_full fifo_full_s3c2440 +#endif + + .macro senduart,rd,rx + strb \rd, [\rx, # S3C2410_UTXH ] + .endm + + .macro busyuart, rd, rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_full \rd, \rx + bne 1003b + b 1002f + +1001: + @ busy waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm + + .macro waituart,rd,rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_level \rd, \rx + teq \rd, #0 + bne 1003b + b 1002f +1001: + @ idle waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h new file mode 100644 index 00000000000..796d2425831 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -0,0 +1,74 @@ +/* arch/arm/plat-samsung/include/plat/devs.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for s3c2410 standard platform devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ +#include <linux/platform_device.h> + +struct s3c24xx_uart_resources { + struct resource *resources; + unsigned long nr_resources; +}; + +extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; +extern struct s3c24xx_uart_resources s3c64xx_uart_resources[]; +extern struct s3c24xx_uart_resources s5p_uart_resources[]; + +extern struct platform_device *s3c24xx_uart_devs[]; +extern struct platform_device *s3c24xx_uart_src[]; + +extern struct platform_device s3c_device_timer[]; + +extern struct platform_device s3c64xx_device_iis0; +extern struct platform_device s3c64xx_device_iis1; +extern struct platform_device s3c64xx_device_iisv4; + +extern struct platform_device s3c64xx_device_spi0; +extern struct platform_device s3c64xx_device_spi1; + +extern struct platform_device s3c64xx_device_pcm0; +extern struct platform_device s3c64xx_device_pcm1; + +extern struct platform_device s3c64xx_device_ac97; + +extern struct platform_device s3c_device_ts; + +extern struct platform_device s3c_device_fb; +extern struct platform_device s3c_device_ohci; +extern struct platform_device s3c_device_lcd; +extern struct platform_device s3c_device_wdt; +extern struct platform_device s3c_device_i2c0; +extern struct platform_device s3c_device_i2c1; +extern struct platform_device s3c_device_rtc; +extern struct platform_device s3c_device_adc; +extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_iis; +extern struct platform_device s3c_device_hwmon; +extern struct platform_device s3c_device_hsmmc0; +extern struct platform_device s3c_device_hsmmc1; +extern struct platform_device s3c_device_hsmmc2; + +extern struct platform_device s3c_device_spi0; +extern struct platform_device s3c_device_spi1; + +extern struct platform_device s3c_device_hwmon; + +extern struct platform_device s3c_device_nand; + +extern struct platform_device s3c_device_usbgadget; +extern struct platform_device s3c_device_usb_hsotg; + +/* s3c2440 specific devices */ + +#ifdef CONFIG_CPU_S3C2440 + +extern struct platform_device s3c_device_camif; +extern struct platform_device s3c_device_ac97; + +#endif diff --git a/arch/arm/plat-samsung/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h new file mode 100644 index 00000000000..32ff2a92cb3 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/dma-core.h @@ -0,0 +1,22 @@ +/* arch/arm/plat-s3c/include/plat/dma.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Samsung S3C DMA core support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel); + +extern struct s3c2410_dma_chan *s3c_dma_chan_map[]; + +/* the currently allocated channel information */ +extern struct s3c2410_dma_chan s3c2410_chans[]; + + diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h new file mode 100644 index 00000000000..336d5ac0203 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h @@ -0,0 +1,84 @@ +/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C24XX DMA support - per SoC functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <plat/dma-core.h> + +extern struct sysdev_class dma_sysclass; +extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; + +#define DMA_CH_VALID (1<<31) +#define DMA_CH_NEVER (1<<30) + +struct s3c24xx_dma_addr { + unsigned long from; + unsigned long to; +}; + +/* struct s3c24xx_dma_map + * + * this holds the mapping information for the channel selected + * to be connected to the specified device +*/ + +struct s3c24xx_dma_map { + const char *name; + struct s3c24xx_dma_addr hw_addr; + + unsigned long channels[S3C_DMA_CHANNELS]; + unsigned long channels_rx[S3C_DMA_CHANNELS]; +}; + +struct s3c24xx_dma_selection { + struct s3c24xx_dma_map *map; + unsigned long map_size; + unsigned long dcon_mask; + + void (*select)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map); + + void (*direction)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map, + enum s3c2410_dmasrc dir); +}; + +extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); + +/* struct s3c24xx_dma_order_ch + * + * channel map for one of the `enum dma_ch` dma channels. the list + * entry contains a set of low-level channel numbers, orred with + * DMA_CH_VALID, which are checked in the order in the array. +*/ + +struct s3c24xx_dma_order_ch { + unsigned int list[S3C_DMA_CHANNELS]; /* list of channels */ + unsigned int flags; /* flags */ +}; + +/* struct s3c24xx_dma_order + * + * information provided by either the core or the board to give the + * dma system a hint on how to allocate channels +*/ + +struct s3c24xx_dma_order { + struct s3c24xx_dma_order_ch channels[DMACH_MAX]; +}; + +extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map); + +/* DMA init code, called from the cpu support code */ + +extern int s3c2410_dma_init(void); + +extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq, + unsigned int stride); diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h new file mode 100644 index 00000000000..7584d751ed5 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -0,0 +1,127 @@ +/* arch/arm/plat-samsung/include/plat/dma.h + * + * Copyright (C) 2003-2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Samsung S3C DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +enum s3c2410_dma_buffresult { + S3C2410_RES_OK, + S3C2410_RES_ERR, + S3C2410_RES_ABORT +}; + +enum s3c2410_dmasrc { + S3C2410_DMASRC_HW, /* source is memory */ + S3C2410_DMASRC_MEM /* source is hardware */ +}; + +/* enum s3c2410_chan_op + * + * operation codes passed to the DMA code by the user, and also used + * to inform the current channel owner of any changes to the system state +*/ + +enum s3c2410_chan_op { + S3C2410_DMAOP_START, + S3C2410_DMAOP_STOP, + S3C2410_DMAOP_PAUSE, + S3C2410_DMAOP_RESUME, + S3C2410_DMAOP_FLUSH, + S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ + S3C2410_DMAOP_STARTED, /* indicate channel started */ +}; + +struct s3c2410_dma_client { + char *name; +}; + +struct s3c2410_dma_chan; + +/* s3c2410_dma_cbfn_t + * + * buffer callback routine type +*/ + +typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *, + void *buf, int size, + enum s3c2410_dma_buffresult result); + +typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, + enum s3c2410_chan_op ); + + + +/* s3c2410_dma_request + * + * request a dma channel exclusivley +*/ + +extern int s3c2410_dma_request(unsigned int channel, + struct s3c2410_dma_client *, void *dev); + + +/* s3c2410_dma_ctrl + * + * change the state of the dma channel +*/ + +extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op); + +/* s3c2410_dma_setflags + * + * set the channel's flags to a given state +*/ + +extern int s3c2410_dma_setflags(unsigned int channel, + unsigned int flags); + +/* s3c2410_dma_free + * + * free the dma channel (will also abort any outstanding operations) +*/ + +extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); + +/* s3c2410_dma_enqueue + * + * place the given buffer onto the queue of operations for the channel. + * The buffer must be allocated from dma coherent memory, or the Dcache/WB + * drained before the buffer is given to the DMA system. +*/ + +extern int s3c2410_dma_enqueue(unsigned int channel, void *id, + dma_addr_t data, int size); + +/* s3c2410_dma_config + * + * configure the dma channel +*/ + +extern int s3c2410_dma_config(unsigned int channel, int xferunit); + +/* s3c2410_dma_devconfig + * + * configure the device we're talking to +*/ + +extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, + unsigned long devaddr); + +/* s3c2410_dma_getposition + * + * get the position that the dma transfer is currently at +*/ + +extern int s3c2410_dma_getposition(unsigned int channel, + dma_addr_t *src, dma_addr_t *dest); + +extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn); + + diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h new file mode 100644 index 00000000000..ffc01a76b7c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -0,0 +1,80 @@ +/* arch/arm/plat-samsung/include/plat/fb.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - FB platform data definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_FB_H +#define __PLAT_S3C_FB_H __FILE__ + +/** + * struct s3c_fb_pd_win - per window setup data + * @win_mode: The display parameters to initialise (not for window 0) + * @virtual_x: The virtual X size. + * @virtual_y: The virtual Y size. + */ +struct s3c_fb_pd_win { + struct fb_videomode win_mode; + + unsigned short default_bpp; + unsigned short max_bpp; + unsigned short virtual_x; + unsigned short virtual_y; +}; + +/** + * struct s3c_fb_platdata - S3C driver platform specific information + * @setup_gpio: Setup the external GPIO pins to the right state to transfer + * the data from the display system to the connected display + * device. + * @vidcon0: The base vidcon0 values to control the panel data format. + * @vidcon1: The base vidcon1 values to control the panel data output. + * @win: The setup data for each hardware window, or NULL for unused. + * @display_mode: The LCD output display mode. + * + * The platform data supplies the video driver with all the information + * it requires to work with the display(s) attached to the machine. It + * controls the initial mode, the number of display windows (0 is always + * the base framebuffer) that are initialised etc. + * + */ +struct s3c_fb_platdata { + void (*setup_gpio)(void); + + struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; + + u32 vidcon0; + u32 vidcon1; +}; + +/** + * s3c_fb_set_platdata() - Setup the FB device with platform data. + * @pd: The platform data to set. The data is copied from the passed structure + * so the machine data can mark the data __initdata so that any unused + * machines will end up dumping their data at runtime. + */ +extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd); + +/** + * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s3c64xx_fb_gpio_setup_24bpp(void); + +/** + * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s5pc100_fb_gpio_setup_24bpp(void); + +#endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h new file mode 100644 index 00000000000..dda19da037a --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -0,0 +1,176 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO pin configuration helper definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This is meant for core cpu support, machine or other driver files + * should not be including this header. + */ + +#ifndef __PLAT_GPIO_CFG_HELPERS_H +#define __PLAT_GPIO_CFG_HELPERS_H __FILE__ + +/* As a note, all gpio configuration functions are entered exclusively, either + * with the relevant lock held or the system prevented from doing anything else + * by disabling interrupts. +*/ + +static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int config) +{ + return (chip->config->set_config)(chip, off, config); +} + +static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + return (chip->config->set_pull)(chip, off, pull); +} + +/** + * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has two bits of configuration per gpio, which have the following + * functions: + * 00 = input + * 01 = output + * 1x = special function +*/ +extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has one bit of configuration for the gpio, where setting the bit + * means the pin is in special function mode and unset means output. +*/ +extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependant on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a separate set of functions for + * each case. +*/ +extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + + +/* Pull-{up,down} resistor controls. + * + * S3C2410,S3C2440,S3C24A0 = Pull-UP, + * S3C2412,S3C2413 = Pull-Down + * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef] + * S3C2443 = Pull-Both [not same as S3C6400] + */ + +/** + * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-up resistor. + */ +extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none + * @chip: The gpio chip that is being configured + * @off: The offset for the GPIO being configured + * @param: pull: The pull mode being requested + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-down resistor. + */ +extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = No pull resistor connected + * 01 = Pull-up resistor connected + * 10 = Pull-down resistor connected + */ +extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + + +/** + * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, + unsigned int off); + +/** + * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = Pull-up resistor connected + * 10 = Pull-down resistor connected + * x1 = No pull up resistor + */ +extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors + * @chip: The gpio chip that the GPIO pin belongs to. + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + +#endif /* __PLAT_GPIO_CFG_HELPERS_H */ + diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h new file mode 100644 index 00000000000..29cd6a86cad --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -0,0 +1,110 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO pin configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This file contains the necessary definitions to get the basic gpio + * pin configuration done such as setting a pin to input or output or + * changing the pull-{up,down} configurations. + */ + +/* Note, this interface is being added to the s3c64xx arch first and will + * be added to the s3c24xx systems later. + */ + +#ifndef __PLAT_GPIO_CFG_H +#define __PLAT_GPIO_CFG_H __FILE__ + +typedef unsigned int __bitwise__ s3c_gpio_pull_t; + +/* forward declaration if gpio-core.h hasn't been included */ +struct s3c_gpio_chip; + +/** + * struct s3c_gpio_cfg GPIO configuration + * @cfg_eint: Configuration setting when used for external interrupt source + * @get_pull: Read the current pull configuration for the GPIO + * @set_pull: Set the current pull configuraiton for the GPIO + * @set_config: Set the current configuration for the GPIO + * @get_config: Read the current configuration for the GPIO + * + * Each chip can have more than one type of GPIO bank available and some + * have different capabilites even when they have the same control register + * layouts. Provide an point to vector control routine and provide any + * per-bank configuration information that other systems such as the + * external interrupt code will need. + */ +struct s3c_gpio_cfg { + unsigned int cfg_eint; + + s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs); + int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs, + s3c_gpio_pull_t pull); + + unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs); + int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs, + unsigned config); +}; + +#define S3C_GPIO_SPECIAL_MARK (0xfffffff0) +#define S3C_GPIO_SPECIAL(x) (S3C_GPIO_SPECIAL_MARK | (x)) + +/* Defines for generic pin configurations */ +#define S3C_GPIO_INPUT (S3C_GPIO_SPECIAL(0)) +#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1)) +#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x)) + +#define s3c_gpio_is_cfg_special(_cfg) \ + (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK) + +/** + * s3c_gpio_cfgpin() - Change the GPIO function of a pin. + * @pin pin The pin number to configure. + * @pin to The configuration for the pin's function. + * + * Configure which function is actually connected to the external + * pin, such as an gpio input, output or some form of special function + * connected to an internal peripheral block. + */ +extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); + +/* Define values for the pull-{up,down} available for each gpio pin. + * + * These values control the state of the weak pull-{up,down} resistors + * available on most pins on the S3C series. Not all chips support both + * up or down settings, and it may be dependant on the chip that is being + * used to whether the particular mode is available. + */ +#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) +#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01) +#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02) + +/** + * s3c_gpio_setpull() - set the state of a gpio pin pull resistor + * @pin: The pin number to configure the pull resistor. + * @pull: The configuration for the pull resistor. + * + * This function sets the state of the pull-{up,down} resistor for the + * specified pin. It will return 0 if successfull, or a negative error + * code if the pin cannot support the requested pull setting. +*/ +extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_getpull() - get the pull resistor state of a gpio pin + * @pin: The pin number to get the settings for + * + * Read the pull resistor value for the specified pin. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); + +#endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h new file mode 100644 index 00000000000..49ff406a706 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -0,0 +1,137 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h + * + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define GPIOCON_OFF (0x00) +#define GPIODAT_OFF (0x04) + +#define con_4bit_shift(__off) ((__off) * 4) + +/* Define the core gpiolib support functions that the s3c platforms may + * need to extend or change depending on the hardware and the s3c chip + * selected at build or found at run time. + * + * These definitions are not intended for driver inclusion, there is + * nothing here that should not live outside the platform and core + * specific code. +*/ + +struct s3c_gpio_chip; + +/** + * struct s3c_gpio_pm - power management (suspend/resume) information + * @save: Routine to save the state of the GPIO block + * @resume: Routine to resume the GPIO block. + */ +struct s3c_gpio_pm { + void (*save)(struct s3c_gpio_chip *chip); + void (*resume)(struct s3c_gpio_chip *chip); +}; + +struct s3c_gpio_cfg; + +/** + * struct s3c_gpio_chip - wrapper for specific implementation of gpio + * @chip: The chip structure to be exported via gpiolib. + * @base: The base pointer to the gpio configuration registers. + * @config: special function and pull-resistor control information. + * @pm_save: Save information for suspend/resume support. + * + * This wrapper provides the necessary information for the Samsung + * specific gpios being registered with gpiolib. + */ +struct s3c_gpio_chip { + struct gpio_chip chip; + struct s3c_gpio_cfg *config; + struct s3c_gpio_pm *pm; + void __iomem *base; +#ifdef CONFIG_PM + u32 pm_save[4]; +#endif +}; + +static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc) +{ + return container_of(gpc, struct s3c_gpio_chip, chip); +} + +/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip. + * @chip: The chip to register + * + * This is a wrapper to gpiochip_add() that takes our specific gpio chip + * information and makes the necessary alterations for the platform and + * notes the information for use with the configuration systems and any + * other parts of the system. + */ +extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); + +/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios + * for use with the configuration calls, and other parts of the s3c gpiolib + * support code. + * + * Not all s3c support code will need this, as some configurations of cpu + * may only support one or two different configuration options and have an + * easy gpio to s3c_gpio_chip mapping function. If this is the case, then + * the machine support file should provide its own s3c_gpiolib_getchip() + * and any other necessary functions. + */ + +/** + * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependant on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a seperate set of function + * (samsung_gpiolib_add_4bit2_chips)for each case. + */ +extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, + int nr_chips); +extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, + int nr_chips); + +extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); +extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); + +#ifdef CONFIG_S3C_GPIO_TRACK +extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) +{ + return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL; +} +#else +/* machine specific code should provide s3c_gpiolib_getchip */ + +#include <mach/gpio-track.h> + +static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } +#endif + +#ifdef CONFIG_PM +extern struct s3c_gpio_pm s3c_gpio_pm_1bit; +extern struct s3c_gpio_pm s3c_gpio_pm_2bit; +extern struct s3c_gpio_pm s3c_gpio_pm_4bit; +#define __gpio_pm(x) x +#else +#define s3c_gpio_pm_1bit NULL +#define s3c_gpio_pm_2bit NULL +#define s3c_gpio_pm_4bit NULL +#define __gpio_pm(x) NULL + +#endif /* CONFIG_PM */ diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h new file mode 100644 index 00000000000..1ba88ea0aa3 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hwmon.h @@ -0,0 +1,41 @@ +/* linux/arch/arm/plat-s3c/include/plat/hwmon.h + * + * Copyright 2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C - HWMon interface for ADC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_ADC_HWMON_H +#define __ASM_ARCH_ADC_HWMON_H __FILE__ + +/** + * s3c_hwmon_chcfg - channel configuration + * @name: The name to give this channel. + * @mult: Multiply the ADC value read by this. + * @div: Divide the value from the ADC by this. + * + * The value read from the ADC is converted to a value that + * hwmon expects (mV) by result = (value_read * @mult) / @div. + */ +struct s3c_hwmon_chcfg { + const char *name; + unsigned int mult; + unsigned int div; +}; + +/** + * s3c_hwmon_pdata - HWMON platform data + * @in: One configuration for each possible channel used. + */ +struct s3c_hwmon_pdata { + struct s3c_hwmon_chcfg *in[8]; +}; + +#endif /* __ASM_ARCH_ADC_HWMON_H */ + diff --git a/arch/arm/plat-samsung/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h new file mode 100644 index 00000000000..36397ca2096 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/iic-core.h @@ -0,0 +1,35 @@ +/* arch/arm/mach-s3c2410/include/mach/iic-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - I2C Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IIC_CORE_H +#define __ASM_ARCH_IIC_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_i2c0_setname(char *name) +{ + /* currently this device is always compiled in */ + s3c_device_i2c0.name = name; +} + +static inline void s3c_i2c1_setname(char *name) +{ +#ifdef CONFIG_S3C_DEV_I2C1 + s3c_device_i2c1.name = name; +#endif +} + +#endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h new file mode 100644 index 00000000000..3083df00dee --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/iic.h @@ -0,0 +1,62 @@ +/* arch/arm/plat-s3c/include/plat/iic.h + * + * Copyright 2004-2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - I2C Controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IIC_H +#define __ASM_ARCH_IIC_H __FILE__ + +#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ + +/** + * struct s3c2410_platform_i2c - Platform data for s3c I2C. + * @bus_num: The bus number to use (if possible). + * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER). + * @slave_addr: The I2C address for the slave device (if enabled). + * @frequency: The desired frequency in Hz of the bus. This is + * guaranteed to not be exceeded. If the caller does + * not care, use zero and the driver will select a + * useful default. + * @sda_delay: The delay (in ns) applied to SDA edges. + * @cfg_gpio: A callback to configure the pins for I2C operation. + */ +struct s3c2410_platform_i2c { + int bus_num; + unsigned int flags; + unsigned int slave_addr; + unsigned long frequency; + unsigned int sda_delay; + + void (*cfg_gpio)(struct platform_device *dev); +}; + +/** + * s3c_i2c0_set_platdata - set platform data for i2c0 device + * @i2c: The platform data to set, or NULL for default data. + * + * Register the given platform data for use with the i2c0 device. This + * call copies the platform data, so the caller can use __initdata for + * their copy. + * + * This call will set cfg_gpio if is null to the default platform + * implementation. + * + * Any user of s3c_device_i2c0 should call this, even if it is with + * NULL to ensure that the device is given the default platform data + * as the driver will no longer carry defaults. + */ +extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); + +/* defined by architecture to configure gpio */ +extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); + +#endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/irq-uart.h b/arch/arm/plat-samsung/include/plat/irq-uart.h new file mode 100644 index 00000000000..a9331e49bea --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/irq-uart.h @@ -0,0 +1,20 @@ +/* arch/arm/plat-samsung/include/plat/irq-uart.h + * + * Copyright (c) 2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for Samsung SoC UART IRQ demux for S3C64XX and later + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct s3c_uart_irq { + void __iomem *regs; + unsigned int base_irq; + unsigned int parent_irq; +}; + +extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs); + diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h new file mode 100644 index 00000000000..a90b53431b5 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h @@ -0,0 +1,13 @@ +/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h + * + * Copyright (c) 2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Header file for Samsung SoC IRQ VIC timer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void s3c_init_vic_timer_irq(unsigned int vic, unsigned int timer); diff --git a/arch/arm/plat-samsung/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h new file mode 100644 index 00000000000..250be311c85 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/map-base.h @@ -0,0 +1,46 @@ +/* linux/include/asm-arm/plat-s3c/map.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - Memory map definitions (virtual addresses) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_H +#define __ASM_PLAT_MAP_H __FILE__ + +/* Fit all our registers in at 0xF4000000 upwards, trying to use as + * little of the VA space as possible so vmalloc and friends have a + * better chance of getting memory. + * + * we try to ensure stuff like the IRQ registers are available for + * an single MOVS instruction (ie, only 8 bits of set data) + */ + +#define S3C_ADDR_BASE (0xF4000000) + +#ifndef __ASSEMBLY__ +#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) +#else +#define S3C_ADDR(x) (S3C_ADDR_BASE + (x)) +#endif + +#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */ +#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */ +#define S3C_VA_MEM S3C_ADDR(0x00200000) /* memory control */ +#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */ +#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */ +#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */ + +/* This is used for the CPU specific mappings that may be needed, so that + * they do not need to directly used S3C_ADDR() and thus make it easier to + * modify the space for mapping. + */ +#define S3C_ADDR_CPU(x) S3C_ADDR(0x00500000 + (x)) + +#endif /* __ASM_PLAT_MAP_H */ diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h new file mode 100644 index 00000000000..b64115fa93a --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/nand.h @@ -0,0 +1,67 @@ +/* arch/arm/mach-s3c2410/include/mach/nand.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - NAND device controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/** + * struct s3c2410_nand_set - define a set of one or more nand chips + * @disable_ecc: Entirely disable ECC - Dangerous + * @flash_bbt: Openmoko u-boot can create a Bad Block Table + * Setting this flag will allow the kernel to + * look for it at boot time and also skip the NAND + * scan. + * @options: Default value to set into 'struct nand_chip' options. + * @nr_chips: Number of chips in this set + * @nr_partitions: Number of partitions pointed to by @partitions + * @name: Name of set (optional) + * @nr_map: Map for low-layer logical to physical chip numbers (option) + * @partitions: The mtd partition list + * + * define a set of one or more nand chips registered with an unique mtd. Also + * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger + * a warning at boot time. + */ +struct s3c2410_nand_set { + unsigned int disable_ecc:1; + unsigned int flash_bbt:1; + + unsigned int options; + int nr_chips; + int nr_partitions; + char *name; + int *nr_map; + struct mtd_partition *partitions; + struct nand_ecclayout *ecc_layout; +}; + +struct s3c2410_platform_nand { + /* timing information for controller, all times in nanoseconds */ + + int tacls; /* time for active CLE/ALE to nWE/nOE */ + int twrph0; /* active time for nWE/nOE */ + int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + + unsigned int ignore_unset_ecc:1; + + int nr_sets; + struct s3c2410_nand_set *sets; + + void (*select_chip)(struct s3c2410_nand_set *, + int chip); +}; + +/** + * s3c_nand_set_platdata() - register NAND platform data. + * @nand: The NAND platform data to register with s3c_device_nand. + * + * This function copies the given NAND platform data, @nand and registers + * it with the s3c_device_nand. This allows @nand to be __initdata. +*/ +extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h new file mode 100644 index 00000000000..245836d9193 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -0,0 +1,189 @@ +/* arch/arm/plat-samsung/include/plat/pm.h + * + * Copyright (c) 2004 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Written by Ben Dooks, <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* s3c_pm_init + * + * called from board at initialisation time to setup the power + * management +*/ + +#ifdef CONFIG_PM + +extern __init int s3c_pm_init(void); + +#else + +static inline int s3c_pm_init(void) +{ + return 0; +} +#endif + +/* configuration for the IRQ mask over sleep */ +extern unsigned long s3c_irqwake_intmask; +extern unsigned long s3c_irqwake_eintmask; + +/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ +extern unsigned long s3c_irqwake_intallow; +extern unsigned long s3c_irqwake_eintallow; + +/* per-cpu sleep functions */ + +extern void (*pm_cpu_prep)(void); +extern void (*pm_cpu_sleep)(void); + +/* Flags for PM Control */ + +extern unsigned long s3c_pm_flags; + +extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ + +/* from sleep.S */ + +extern int s3c_cpu_save(unsigned long *saveblk); +extern void s3c_cpu_resume(void); + +extern void s3c2410_cpu_suspend(void); + +extern unsigned long s3c_sleep_save_phys; + +/* sleep save info */ + +/** + * struct sleep_save - save information for shared peripherals. + * @reg: Pointer to the register to save. + * @val: Holder for the value saved from reg. + * + * This describes a list of registers which is used by the pm core and + * other subsystem to save and restore register values over suspend. + */ +struct sleep_save { + void __iomem *reg; + unsigned long val; +}; + +#define SAVE_ITEM(x) \ + { .reg = (x) } + +/** + * struct pm_uart_save - save block for core UART + * @ulcon: Save value for S3C2410_ULCON + * @ucon: Save value for S3C2410_UCON + * @ufcon: Save value for S3C2410_UFCON + * @umcon: Save value for S3C2410_UMCON + * @ubrdiv: Save value for S3C2410_UBRDIV + * + * Save block for UART registers to be held over sleep and restored if they + * are needed (say by debug). +*/ +struct pm_uart_save { + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 ubrdiv; + u32 udivslot; +}; + +/* helper functions to save/restore lists of registers. */ + +extern void s3c_pm_do_save(struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore(struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); + +#ifdef CONFIG_PM +extern int s3c_irqext_wake(unsigned int irqno, unsigned int state); +extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s3c24xx_irq_resume(struct sys_device *dev); +#else +#define s3c_irqext_wake NULL +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif + +/* PM debug functions */ + +#ifdef CONFIG_SAMSUNG_PM_DEBUG +/** + * s3c_pm_dbg() - low level debug function for use in suspend/resume. + * @msg: The message to print. + * + * This function is used mainly to debug the resume process before the system + * can rely on printk/console output. It uses the low-level debugging output + * routine printascii() to do its work. + */ +extern void s3c_pm_dbg(const char *msg, ...); + +#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) +#else +#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt) +#endif + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK +/** + * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs + * @set: set bits for the state of the LEDs + * @clear: clear bits for the state of the LEDs. + */ +extern void s3c_pm_debug_smdkled(u32 set, u32 clear); + +#else +static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { } +#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */ + +/* suspend memory checking */ + +#ifdef CONFIG_SAMSUNG_PM_CHECK +extern void s3c_pm_check_prepare(void); +extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_cleanup(void); +extern void s3c_pm_check_store(void); +#else +#define s3c_pm_check_prepare() do { } while(0) +#define s3c_pm_check_restore() do { } while(0) +#define s3c_pm_check_cleanup() do { } while(0) +#define s3c_pm_check_store() do { } while(0) +#endif + +/** + * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ + * + * Setup all the necessary GPIO pins for waking the system on external + * interrupt. + */ +extern void s3c_pm_configure_extint(void); + +/** + * s3c_pm_restore_gpios() - restore the state of the gpios after sleep. + * + * Restore the state of the GPIO pins after sleep, which may involve ensuring + * that we do not glitch the state of the pins from that the bootloader's + * resume code has done. +*/ +extern void s3c_pm_restore_gpios(void); + +/** + * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. + * + * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios(). + */ +extern void s3c_pm_save_gpios(void); + +/** + * s3c_pm_cb_flushcache - callback for assembly code + * + * Callback to issue flush_cache_all() as this call is + * not a directly callable object. + */ +extern void s3c_pm_cb_flushcache(void); + +extern void s3c_pm_save_core(void); +extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-samsung/include/plat/regs-ac97.h b/arch/arm/plat-samsung/include/plat/regs-ac97.h new file mode 100644 index 00000000000..c3878f7acb8 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-ac97.h @@ -0,0 +1,67 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h + * + * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2440 AC97 Controller +*/ + +#ifndef __ASM_ARCH_REGS_AC97_H +#define __ASM_ARCH_REGS_AC97_H __FILE__ + +#define S3C_AC97_GLBCTRL (0x00) + +#define S3C_AC97_GLBCTRL_CODECREADYIE (1<<22) +#define S3C_AC97_GLBCTRL_PCMOUTURIE (1<<21) +#define S3C_AC97_GLBCTRL_PCMINORIE (1<<20) +#define S3C_AC97_GLBCTRL_MICINORIE (1<<19) +#define S3C_AC97_GLBCTRL_PCMOUTTIE (1<<18) +#define S3C_AC97_GLBCTRL_PCMINTIE (1<<17) +#define S3C_AC97_GLBCTRL_MICINTIE (1<<16) +#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF (0<<12) +#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO (1<<12) +#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA (2<<12) +#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK (3<<12) +#define S3C_AC97_GLBCTRL_PCMINTM_OFF (0<<10) +#define S3C_AC97_GLBCTRL_PCMINTM_PIO (1<<10) +#define S3C_AC97_GLBCTRL_PCMINTM_DMA (2<<10) +#define S3C_AC97_GLBCTRL_PCMINTM_MASK (3<<10) +#define S3C_AC97_GLBCTRL_MICINTM_OFF (0<<8) +#define S3C_AC97_GLBCTRL_MICINTM_PIO (1<<8) +#define S3C_AC97_GLBCTRL_MICINTM_DMA (2<<8) +#define S3C_AC97_GLBCTRL_MICINTM_MASK (3<<8) +#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE (1<<3) +#define S3C_AC97_GLBCTRL_ACLINKON (1<<2) +#define S3C_AC97_GLBCTRL_WARMRESET (1<<1) +#define S3C_AC97_GLBCTRL_COLDRESET (1<<0) + +#define S3C_AC97_GLBSTAT (0x04) + +#define S3C_AC97_GLBSTAT_CODECREADY (1<<22) +#define S3C_AC97_GLBSTAT_PCMOUTUR (1<<21) +#define S3C_AC97_GLBSTAT_PCMINORI (1<<20) +#define S3C_AC97_GLBSTAT_MICINORI (1<<19) +#define S3C_AC97_GLBSTAT_PCMOUTTI (1<<18) +#define S3C_AC97_GLBSTAT_PCMINTI (1<<17) +#define S3C_AC97_GLBSTAT_MICINTI (1<<16) +#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE (0<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_INIT (1<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_READY (2<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE (3<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_LP (4<<0) +#define S3C_AC97_GLBSTAT_MAINSTATE_WARM (5<<0) + +#define S3C_AC97_CODEC_CMD (0x08) + +#define S3C_AC97_CODEC_CMD_READ (1<<23) + +#define S3C_AC97_STAT (0x0c) +#define S3C_AC97_PCM_ADDR (0x10) +#define S3C_AC97_PCM_DATA (0x18) +#define S3C_AC97_MIC_DATA (0x1C) + +#endif /* __ASM_ARCH_REGS_AC97_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h new file mode 100644 index 00000000000..7554c4fcddb --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-adc.h @@ -0,0 +1,64 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-adc.h + * + * Copyright (c) 2004 Shannon Holland <holland@loser.net> + * + * This program is free software; yosu can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 ADC registers +*/ + +#ifndef __ASM_ARCH_REGS_ADC_H +#define __ASM_ARCH_REGS_ADC_H "regs-adc.h" + +#define S3C2410_ADCREG(x) (x) + +#define S3C2410_ADCCON S3C2410_ADCREG(0x00) +#define S3C2410_ADCTSC S3C2410_ADCREG(0x04) +#define S3C2410_ADCDLY S3C2410_ADCREG(0x08) +#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C) +#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) +#define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14) +#define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18) +#define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20) + + +/* ADCCON Register Bits */ +#define S3C64XX_ADCCON_RESSEL (1<<16) +#define S3C2410_ADCCON_ECFLG (1<<15) +#define S3C2410_ADCCON_PRSCEN (1<<14) +#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6) +#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6) +#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3) +#define S3C2410_ADCCON_MUXMASK (0x7<<3) +#define S3C2410_ADCCON_STDBM (1<<2) +#define S3C2410_ADCCON_READ_START (1<<1) +#define S3C2410_ADCCON_ENABLE_START (1<<0) +#define S3C2410_ADCCON_STARTMASK (0x3<<0) + + +/* ADCTSC Register Bits */ +#define S3C2410_ADCTSC_YM_SEN (1<<7) +#define S3C2410_ADCTSC_YP_SEN (1<<6) +#define S3C2410_ADCTSC_XM_SEN (1<<5) +#define S3C2410_ADCTSC_XP_SEN (1<<4) +#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3) +#define S3C2410_ADCTSC_AUTO_PST (1<<2) +#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0) + +/* ADCDAT0 Bits */ +#define S3C2410_ADCDAT0_UPDOWN (1<<15) +#define S3C2410_ADCDAT0_AUTO_PST (1<<14) +#define S3C2410_ADCDAT0_XY_PST (0x3<<12) +#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF) + +/* ADCDAT1 Bits */ +#define S3C2410_ADCDAT1_UPDOWN (1<<15) +#define S3C2410_ADCDAT1_AUTO_PST (1<<14) +#define S3C2410_ADCDAT1_XY_PST (0x3<<12) +#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF) + +#endif /* __ASM_ARCH_REGS_ADC_H */ + + diff --git a/arch/arm/plat-samsung/include/plat/regs-fb-v4.h b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h new file mode 100644 index 00000000000..0f43599248a --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h @@ -0,0 +1,235 @@ +/* arch/arm/plat-samsung/include/plat/regs-fb-v4.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - new-style framebuffer register definitions + * + * This is the register set for the new style framebuffer interface + * found from the S3C2443 onwards and specifically the S3C64XX series + * S3C6400 and S3C6410. + * + * The file contains the cpu specific items which change between whichever + * architecture is selected. See <plat/regs-fb.h> for the core definitions + * that are the same. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* include the core definitions here, in case we really do need to + * override them at a later date. +*/ + +#include <plat/regs-fb.h> + +#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */ +#define VIDCON1_FSTATUS_EVEN (1 << 15) + +/* Video timing controls */ +#define VIDTCON0 (0x10) +#define VIDTCON1 (0x14) +#define VIDTCON2 (0x18) + +/* Window position controls */ + +#define WINCON(_win) (0x20 + ((_win) * 4)) + +/* OSD1 and OSD4 do not have register D */ + +#define VIDOSD_A(_win) (0x40 + ((_win) * 16)) +#define VIDOSD_B(_win) (0x44 + ((_win) * 16)) +#define VIDOSD_C(_win) (0x48 + ((_win) * 16)) +#define VIDOSD_D(_win) (0x4C + ((_win) * 16)) + + +#define VIDINTCON0 (0x130) + +#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4)) + +/* WINCONx */ + +#define WINCONx_CSCWIDTH_MASK (0x3 << 26) +#define WINCONx_CSCWIDTH_SHIFT (26) +#define WINCONx_CSCWIDTH_WIDE (0x0 << 26) +#define WINCONx_CSCWIDTH_NARROW (0x3 << 26) + +#define WINCONx_ENLOCAL (1 << 22) +#define WINCONx_BUFSTATUS (1 << 21) +#define WINCONx_BUFSEL (1 << 20) +#define WINCONx_BUFAUTOEN (1 << 19) +#define WINCONx_YCbCr (1 << 13) + +#define WINCON1_LOCALSEL_CAMIF (1 << 23) + +#define WINCON2_LOCALSEL_CAMIF (1 << 23) +#define WINCON2_BLD_PIX (1 << 6) + +#define WINCON2_ALPHA_SEL (1 << 1) +#define WINCON2_BPPMODE_MASK (0xf << 2) +#define WINCON2_BPPMODE_SHIFT (2) +#define WINCON2_BPPMODE_1BPP (0x0 << 2) +#define WINCON2_BPPMODE_2BPP (0x1 << 2) +#define WINCON2_BPPMODE_4BPP (0x2 << 2) +#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON2_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2) + +#define WINCON3_BLD_PIX (1 << 6) + +#define WINCON3_ALPHA_SEL (1 << 1) +#define WINCON3_BPPMODE_MASK (0xf << 2) +#define WINCON3_BPPMODE_SHIFT (2) +#define WINCON3_BPPMODE_1BPP (0x0 << 2) +#define WINCON3_BPPMODE_2BPP (0x1 << 2) +#define WINCON3_BPPMODE_4BPP (0x2 << 2) +#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON3_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2) + +#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5) + +#define DITHMODE (0x170) +#define WINxMAP(_win) (0x180 + ((_win) * 4)) + + +#define DITHMODE_R_POS_MASK (0x3 << 5) +#define DITHMODE_R_POS_SHIFT (5) +#define DITHMODE_R_POS_8BIT (0x0 << 5) +#define DITHMODE_R_POS_6BIT (0x1 << 5) +#define DITHMODE_R_POS_5BIT (0x2 << 5) + +#define DITHMODE_G_POS_MASK (0x3 << 3) +#define DITHMODE_G_POS_SHIFT (3) +#define DITHMODE_G_POS_8BIT (0x0 << 3) +#define DITHMODE_G_POS_6BIT (0x1 << 3) +#define DITHMODE_G_POS_5BIT (0x2 << 3) + +#define DITHMODE_B_POS_MASK (0x3 << 1) +#define DITHMODE_B_POS_SHIFT (1) +#define DITHMODE_B_POS_8BIT (0x0 << 1) +#define DITHMODE_B_POS_6BIT (0x1 << 1) +#define DITHMODE_B_POS_5BIT (0x2 << 1) + +#define DITHMODE_DITH_EN (1 << 0) + +#define WPALCON (0x1A0) + +/* Palette control */ +/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L), + * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */ +#define WPALCON_W4PAL_16BPP_A555 (1 << 8) +#define WPALCON_W3PAL_16BPP_A555 (1 << 7) +#define WPALCON_W2PAL_16BPP_A555 (1 << 6) + + +/* system specific implementation code for palette sizes, and other + * information that changes depending on which architecture is being + * compiled. +*/ + +/* return true if window _win has OSD register D */ +#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0) + +static inline unsigned int s3c_fb_win_pal_size(unsigned int win) +{ + if (win < 2) + return 256; + if (win < 4) + return 16; + if (win == 4) + return 4; + + BUG(); /* shouldn't get here */ +} + +static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp) +{ + /* all windows can do 1/2 bpp */ + + if ((bpp == 25 || bpp == 19) && win == 0) + return 0; /* win 0 does not have 19 or 25bpp modes */ + + if (bpp == 4 && win == 4) + return 0; + + if (bpp == 8 && (win >= 3)) + return 0; /* win 3/4 cannot do 8bpp in any mode */ + + return 1; +} + +static inline int s3c_fb_pal_is16(unsigned int window) +{ + return window > 1; +} + +struct s3c_fb_palette { + struct fb_bitfield r; + struct fb_bitfield g; + struct fb_bitfield b; + struct fb_bitfield a; +}; + +static inline void s3c_fb_init_palette(unsigned int window, + struct s3c_fb_palette *palette) +{ + if (window < 2) { + /* Windows 0/1 are 8/8/8 or A/8/8/8 */ + palette->r.offset = 16; + palette->r.length = 8; + palette->g.offset = 8; + palette->g.length = 8; + palette->b.offset = 0; + palette->b.length = 8; + } else { + /* currently we assume RGB 5/6/5 */ + palette->r.offset = 11; + palette->r.length = 5; + palette->g.offset = 5; + palette->g.length = 6; + palette->b.offset = 0; + palette->b.length = 5; + } +} + +/* Notes on per-window bpp settings + * + * Value Win0 Win1 Win2 Win3 Win 4 + * 0000 1(P) 1(P) 1(P) 1(P) 1(P) + * 0001 2(P) 2(P) 2(P) 2(P) 2(P) + * 0010 4(P) 4(P) 4(P) 4(P) -none- + * 0011 8(P) 8(P) -none- -none- -none- + * 0100 -none- 8(A232) 8(A232) -none- -none- + * 0101 16(565) 16(565) 16(565) 16(565) 16(565) + * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555) + * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555) + * 1000 18(666) 18(666) 18(666) 18(666) 18(666) + * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665) + * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666) + * 1011 24(888) 24(888) 24(888) 24(888) 24(888) + * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887) + * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888) + * 1110 -none- -none- -none- -none- -none- + * 1111 -none- -none- -none- -none- -none- +*/ diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h new file mode 100644 index 00000000000..0ef806e5034 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-fb.h @@ -0,0 +1,366 @@ +/* arch/arm/plat-samsung/include/plat/regs-fb.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - new-style framebuffer register definitions + * + * This is the register set for the new style framebuffer interface + * found from the S3C2443 onwards into the S3C2416, S3C2450 and the + * S3C64XX series such as the S3C6400 and S3C6410. + * + * The file does not contain the cpu specific items which are based on + * whichever architecture is selected, it only contains the core of the + * register set. See <mach/regs-fb.h> to get the specifics. + * + * Note, we changed to using regs-fb.h as it avoids any clashes with + * the original regs-lcd.h so out of the way of regs-lcd.h as well as + * indicating the newer block is much more than just an LCD interface. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Please do not include this file directly, use <mach/regs-fb.h> to + * ensure all the localised SoC support is included as necessary. +*/ + +/* VIDCON0 */ + +#define VIDCON0 (0x00) +#define VIDCON0_INTERLACE (1 << 29) +#define VIDCON0_VIDOUT_MASK (0x3 << 26) +#define VIDCON0_VIDOUT_SHIFT (26) +#define VIDCON0_VIDOUT_RGB (0x0 << 26) +#define VIDCON0_VIDOUT_TV (0x1 << 26) +#define VIDCON0_VIDOUT_I80_LDI0 (0x2 << 26) +#define VIDCON0_VIDOUT_I80_LDI1 (0x3 << 26) + +#define VIDCON0_L1_DATA_MASK (0x7 << 23) +#define VIDCON0_L1_DATA_SHIFT (23) +#define VIDCON0_L1_DATA_16BPP (0x0 << 23) +#define VIDCON0_L1_DATA_18BPP16 (0x1 << 23) +#define VIDCON0_L1_DATA_18BPP9 (0x2 << 23) +#define VIDCON0_L1_DATA_24BPP (0x3 << 23) +#define VIDCON0_L1_DATA_18BPP (0x4 << 23) +#define VIDCON0_L1_DATA_16BPP8 (0x5 << 23) + +#define VIDCON0_L0_DATA_MASK (0x7 << 20) +#define VIDCON0_L0_DATA_SHIFT (20) +#define VIDCON0_L0_DATA_16BPP (0x0 << 20) +#define VIDCON0_L0_DATA_18BPP16 (0x1 << 20) +#define VIDCON0_L0_DATA_18BPP9 (0x2 << 20) +#define VIDCON0_L0_DATA_24BPP (0x3 << 20) +#define VIDCON0_L0_DATA_18BPP (0x4 << 20) +#define VIDCON0_L0_DATA_16BPP8 (0x5 << 20) + +#define VIDCON0_PNRMODE_MASK (0x3 << 17) +#define VIDCON0_PNRMODE_SHIFT (17) +#define VIDCON0_PNRMODE_RGB (0x0 << 17) +#define VIDCON0_PNRMODE_BGR (0x1 << 17) +#define VIDCON0_PNRMODE_SERIAL_RGB (0x2 << 17) +#define VIDCON0_PNRMODE_SERIAL_BGR (0x3 << 17) + +#define VIDCON0_CLKVALUP (1 << 16) +#define VIDCON0_CLKVAL_F_MASK (0xff << 6) +#define VIDCON0_CLKVAL_F_SHIFT (6) +#define VIDCON0_CLKVAL_F_LIMIT (0xff) +#define VIDCON0_CLKVAL_F(_x) ((_x) << 6) +#define VIDCON0_VLCKFREE (1 << 5) +#define VIDCON0_CLKDIR (1 << 4) + +#define VIDCON0_CLKSEL_MASK (0x3 << 2) +#define VIDCON0_CLKSEL_SHIFT (2) +#define VIDCON0_CLKSEL_HCLK (0x0 << 2) +#define VIDCON0_CLKSEL_LCD (0x1 << 2) +#define VIDCON0_CLKSEL_27M (0x3 << 2) + +#define VIDCON0_ENVID (1 << 1) +#define VIDCON0_ENVID_F (1 << 0) + +#define VIDCON1 (0x04) +#define VIDCON1_LINECNT_MASK (0x7ff << 16) +#define VIDCON1_LINECNT_SHIFT (16) +#define VIDCON1_LINECNT_GET(_v) (((_v) >> 16) & 0x7ff) +#define VIDCON1_VSTATUS_MASK (0x3 << 13) +#define VIDCON1_VSTATUS_SHIFT (13) +#define VIDCON1_VSTATUS_VSYNC (0x0 << 13) +#define VIDCON1_VSTATUS_BACKPORCH (0x1 << 13) +#define VIDCON1_VSTATUS_ACTIVE (0x2 << 13) +#define VIDCON1_VSTATUS_FRONTPORCH (0x0 << 13) + +#define VIDCON1_INV_VCLK (1 << 7) +#define VIDCON1_INV_HSYNC (1 << 6) +#define VIDCON1_INV_VSYNC (1 << 5) +#define VIDCON1_INV_VDEN (1 << 4) + +/* VIDCON2 */ + +#define VIDCON2 (0x08) +#define VIDCON2_EN601 (1 << 23) +#define VIDCON2_TVFMTSEL_SW (1 << 14) + +#define VIDCON2_TVFMTSEL1_MASK (0x3 << 12) +#define VIDCON2_TVFMTSEL1_SHIFT (12) +#define VIDCON2_TVFMTSEL1_RGB (0x0 << 12) +#define VIDCON2_TVFMTSEL1_YUV422 (0x1 << 12) +#define VIDCON2_TVFMTSEL1_YUV444 (0x2 << 12) + +#define VIDCON2_ORGYCbCr (1 << 8) +#define VIDCON2_YUVORDCrCb (1 << 7) + +/* VIDTCON0 */ + +#define VIDTCON0_VBPDE_MASK (0xff << 24) +#define VIDTCON0_VBPDE_SHIFT (24) +#define VIDTCON0_VBPDE_LIMIT (0xff) +#define VIDTCON0_VBPDE(_x) ((_x) << 24) + +#define VIDTCON0_VBPD_MASK (0xff << 16) +#define VIDTCON0_VBPD_SHIFT (16) +#define VIDTCON0_VBPD_LIMIT (0xff) +#define VIDTCON0_VBPD(_x) ((_x) << 16) + +#define VIDTCON0_VFPD_MASK (0xff << 8) +#define VIDTCON0_VFPD_SHIFT (8) +#define VIDTCON0_VFPD_LIMIT (0xff) +#define VIDTCON0_VFPD(_x) ((_x) << 8) + +#define VIDTCON0_VSPW_MASK (0xff << 0) +#define VIDTCON0_VSPW_SHIFT (0) +#define VIDTCON0_VSPW_LIMIT (0xff) +#define VIDTCON0_VSPW(_x) ((_x) << 0) + +/* VIDTCON1 */ + +#define VIDTCON1_VFPDE_MASK (0xff << 24) +#define VIDTCON1_VFPDE_SHIFT (24) +#define VIDTCON1_VFPDE_LIMIT (0xff) +#define VIDTCON1_VFPDE(_x) ((_x) << 24) + +#define VIDTCON1_HBPD_MASK (0xff << 16) +#define VIDTCON1_HBPD_SHIFT (16) +#define VIDTCON1_HBPD_LIMIT (0xff) +#define VIDTCON1_HBPD(_x) ((_x) << 16) + +#define VIDTCON1_HFPD_MASK (0xff << 8) +#define VIDTCON1_HFPD_SHIFT (8) +#define VIDTCON1_HFPD_LIMIT (0xff) +#define VIDTCON1_HFPD(_x) ((_x) << 8) + +#define VIDTCON1_HSPW_MASK (0xff << 0) +#define VIDTCON1_HSPW_SHIFT (0) +#define VIDTCON1_HSPW_LIMIT (0xff) +#define VIDTCON1_HSPW(_x) ((_x) << 0) + +#define VIDTCON2 (0x18) +#define VIDTCON2_LINEVAL_MASK (0x7ff << 11) +#define VIDTCON2_LINEVAL_SHIFT (11) +#define VIDTCON2_LINEVAL_LIMIT (0x7ff) +#define VIDTCON2_LINEVAL(_x) ((_x) << 11) + +#define VIDTCON2_HOZVAL_MASK (0x7ff << 0) +#define VIDTCON2_HOZVAL_SHIFT (0) +#define VIDTCON2_HOZVAL_LIMIT (0x7ff) +#define VIDTCON2_HOZVAL(_x) ((_x) << 0) + +/* WINCONx */ + + +#define WINCONx_BITSWP (1 << 18) +#define WINCONx_BYTSWP (1 << 17) +#define WINCONx_HAWSWP (1 << 16) +#define WINCONx_BURSTLEN_MASK (0x3 << 9) +#define WINCONx_BURSTLEN_SHIFT (9) +#define WINCONx_BURSTLEN_16WORD (0x0 << 9) +#define WINCONx_BURSTLEN_8WORD (0x1 << 9) +#define WINCONx_BURSTLEN_4WORD (0x2 << 9) + +#define WINCONx_ENWIN (1 << 0) +#define WINCON0_BPPMODE_MASK (0xf << 2) +#define WINCON0_BPPMODE_SHIFT (2) +#define WINCON0_BPPMODE_1BPP (0x0 << 2) +#define WINCON0_BPPMODE_2BPP (0x1 << 2) +#define WINCON0_BPPMODE_4BPP (0x2 << 2) +#define WINCON0_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON0_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON0_BPPMODE_16BPP_1555 (0x7 << 2) +#define WINCON0_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON0_BPPMODE_24BPP_888 (0xb << 2) + +#define WINCON1_BLD_PIX (1 << 6) + +#define WINCON1_ALPHA_SEL (1 << 1) +#define WINCON1_BPPMODE_MASK (0xf << 2) +#define WINCON1_BPPMODE_SHIFT (2) +#define WINCON1_BPPMODE_1BPP (0x0 << 2) +#define WINCON1_BPPMODE_2BPP (0x1 << 2) +#define WINCON1_BPPMODE_4BPP (0x2 << 2) +#define WINCON1_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON1_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON1_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON1_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON1_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON1_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON1_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON1_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON1_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON1_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON1_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON1_BPPMODE_28BPP_A4888 (0xd << 2) + + +#define VIDOSDxA_TOPLEFT_X_MASK (0x7ff << 11) +#define VIDOSDxA_TOPLEFT_X_SHIFT (11) +#define VIDOSDxA_TOPLEFT_X_LIMIT (0x7ff) +#define VIDOSDxA_TOPLEFT_X(_x) ((_x) << 11) + +#define VIDOSDxA_TOPLEFT_Y_MASK (0x7ff << 0) +#define VIDOSDxA_TOPLEFT_Y_SHIFT (0) +#define VIDOSDxA_TOPLEFT_Y_LIMIT (0x7ff) +#define VIDOSDxA_TOPLEFT_Y(_x) ((_x) << 0) + +#define VIDOSDxB_BOTRIGHT_X_MASK (0x7ff << 11) +#define VIDOSDxB_BOTRIGHT_X_SHIFT (11) +#define VIDOSDxB_BOTRIGHT_X_LIMIT (0x7ff) +#define VIDOSDxB_BOTRIGHT_X(_x) ((_x) << 11) + +#define VIDOSDxB_BOTRIGHT_Y_MASK (0x7ff << 0) +#define VIDOSDxB_BOTRIGHT_Y_SHIFT (0) +#define VIDOSDxB_BOTRIGHT_Y_LIMIT (0x7ff) +#define VIDOSDxB_BOTRIGHT_Y(_x) ((_x) << 0) + +/* For VIDOSD[1..4]C */ +#define VIDISD14C_ALPHA0_R(_x) ((_x) << 20) +#define VIDISD14C_ALPHA0_G_MASK (0xf << 16) +#define VIDISD14C_ALPHA0_G_SHIFT (16) +#define VIDISD14C_ALPHA0_G_LIMIT (0xf) +#define VIDISD14C_ALPHA0_G(_x) ((_x) << 16) +#define VIDISD14C_ALPHA0_B_MASK (0xf << 12) +#define VIDISD14C_ALPHA0_B_SHIFT (12) +#define VIDISD14C_ALPHA0_B_LIMIT (0xf) +#define VIDISD14C_ALPHA0_B(_x) ((_x) << 12) +#define VIDISD14C_ALPHA1_R_MASK (0xf << 8) +#define VIDISD14C_ALPHA1_R_SHIFT (8) +#define VIDISD14C_ALPHA1_R_LIMIT (0xf) +#define VIDISD14C_ALPHA1_R(_x) ((_x) << 8) +#define VIDISD14C_ALPHA1_G_MASK (0xf << 4) +#define VIDISD14C_ALPHA1_G_SHIFT (4) +#define VIDISD14C_ALPHA1_G_LIMIT (0xf) +#define VIDISD14C_ALPHA1_G(_x) ((_x) << 4) +#define VIDISD14C_ALPHA1_B_MASK (0xf << 0) +#define VIDISD14C_ALPHA1_B_SHIFT (0) +#define VIDISD14C_ALPHA1_B_LIMIT (0xf) +#define VIDISD14C_ALPHA1_B(_x) ((_x) << 0) + +/* Video buffer addresses */ +#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8)) +#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8)) +#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8)) +#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) +#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) + +#define VIDW_BUF_SIZE_OFFSET_MASK (0x1fff << 13) +#define VIDW_BUF_SIZE_OFFSET_SHIFT (13) +#define VIDW_BUF_SIZE_OFFSET_LIMIT (0x1fff) +#define VIDW_BUF_SIZE_OFFSET(_x) ((_x) << 13) + +#define VIDW_BUF_SIZE_PAGEWIDTH_MASK (0x1fff << 0) +#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT (0) +#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT (0x1fff) +#define VIDW_BUF_SIZE_PAGEWIDTH(_x) ((_x) << 0) + +/* Interrupt controls and status */ + +#define VIDINTCON0_FIFOINTERVAL_MASK (0x3f << 20) +#define VIDINTCON0_FIFOINTERVAL_SHIFT (20) +#define VIDINTCON0_FIFOINTERVAL_LIMIT (0x3f) +#define VIDINTCON0_FIFOINTERVAL(_x) ((_x) << 20) + +#define VIDINTCON0_INT_SYSMAINCON (1 << 19) +#define VIDINTCON0_INT_SYSSUBCON (1 << 18) +#define VIDINTCON0_INT_I80IFDONE (1 << 17) + +#define VIDINTCON0_FRAMESEL0_MASK (0x3 << 15) +#define VIDINTCON0_FRAMESEL0_SHIFT (15) +#define VIDINTCON0_FRAMESEL0_BACKPORCH (0x0 << 15) +#define VIDINTCON0_FRAMESEL0_VSYNC (0x1 << 15) +#define VIDINTCON0_FRAMESEL0_ACTIVE (0x2 << 15) +#define VIDINTCON0_FRAMESEL0_FRONTPORCH (0x3 << 15) + +#define VIDINTCON0_FRAMESEL1 (1 << 14) +#define VIDINTCON0_FRAMESEL1_NONE (0x0 << 14) +#define VIDINTCON0_FRAMESEL1_BACKPORCH (0x1 << 14) +#define VIDINTCON0_FRAMESEL1_VSYNC (0x2 << 14) +#define VIDINTCON0_FRAMESEL1_FRONTPORCH (0x3 << 14) + +#define VIDINTCON0_INT_FRAME (1 << 12) +#define VIDINTCON0_FIFIOSEL_MASK (0x7f << 5) +#define VIDINTCON0_FIFIOSEL_SHIFT (5) +#define VIDINTCON0_FIFIOSEL_WINDOW0 (0x1 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW1 (0x2 << 5) + +#define VIDINTCON0_FIFOLEVEL_MASK (0x7 << 2) +#define VIDINTCON0_FIFOLEVEL_SHIFT (2) +#define VIDINTCON0_FIFOLEVEL_TO25PC (0x0 << 2) +#define VIDINTCON0_FIFOLEVEL_TO50PC (0x1 << 2) +#define VIDINTCON0_FIFOLEVEL_TO75PC (0x2 << 2) +#define VIDINTCON0_FIFOLEVEL_EMPTY (0x3 << 2) +#define VIDINTCON0_FIFOLEVEL_FULL (0x4 << 2) + +#define VIDINTCON0_INT_FIFO_MASK (0x3 << 0) +#define VIDINTCON0_INT_FIFO_SHIFT (0) +#define VIDINTCON0_INT_ENABLE (1 << 0) + +#define VIDINTCON1 (0x134) +#define VIDINTCON1_INT_I180 (1 << 2) +#define VIDINTCON1_INT_FRAME (1 << 1) +#define VIDINTCON1_INT_FIFO (1 << 0) + +/* Window colour-key control registers */ + +#define WxKEYCON0_KEYBL_EN (1 << 26) +#define WxKEYCON0_KEYEN_F (1 << 25) +#define WxKEYCON0_DIRCON (1 << 24) +#define WxKEYCON0_COMPKEY_MASK (0xffffff << 0) +#define WxKEYCON0_COMPKEY_SHIFT (0) +#define WxKEYCON0_COMPKEY_LIMIT (0xffffff) +#define WxKEYCON0_COMPKEY(_x) ((_x) << 0) +#define WxKEYCON1_COLVAL_MASK (0xffffff << 0) +#define WxKEYCON1_COLVAL_SHIFT (0) +#define WxKEYCON1_COLVAL_LIMIT (0xffffff) +#define WxKEYCON1_COLVAL(_x) ((_x) << 0) + + +/* Window blanking (MAP) */ + +#define WINxMAP_MAP (1 << 24) +#define WINxMAP_MAP_COLOUR_MASK (0xffffff << 0) +#define WINxMAP_MAP_COLOUR_SHIFT (0) +#define WINxMAP_MAP_COLOUR_LIMIT (0xffffff) +#define WINxMAP_MAP_COLOUR(_x) ((_x) << 0) + +#define WPALCON_PAL_UPDATE (1 << 9) +#define WPALCON_W1PAL_MASK (0x7 << 3) +#define WPALCON_W1PAL_SHIFT (3) +#define WPALCON_W1PAL_25BPP_A888 (0x0 << 3) +#define WPALCON_W1PAL_24BPP (0x1 << 3) +#define WPALCON_W1PAL_19BPP_A666 (0x2 << 3) +#define WPALCON_W1PAL_18BPP_A665 (0x3 << 3) +#define WPALCON_W1PAL_18BPP (0x4 << 3) +#define WPALCON_W1PAL_16BPP_A555 (0x5 << 3) +#define WPALCON_W1PAL_16BPP_565 (0x6 << 3) + +#define WPALCON_W0PAL_MASK (0x7 << 0) +#define WPALCON_W0PAL_SHIFT (0) +#define WPALCON_W0PAL_25BPP_A888 (0x0 << 0) +#define WPALCON_W0PAL_24BPP (0x1 << 0) +#define WPALCON_W0PAL_19BPP_A666 (0x2 << 0) +#define WPALCON_W0PAL_18BPP_A665 (0x3 << 0) +#define WPALCON_W0PAL_18BPP (0x4 << 0) +#define WPALCON_W0PAL_16BPP_A555 (0x5 << 0) +#define WPALCON_W0PAL_16BPP_565 (0x6 << 0) + diff --git a/arch/arm/plat-samsung/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h new file mode 100644 index 00000000000..2f7c17de8ac --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-iic.h @@ -0,0 +1,56 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-iic.h + * + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 I2C Controller +*/ + +#ifndef __ASM_ARCH_REGS_IIC_H +#define __ASM_ARCH_REGS_IIC_H __FILE__ + +/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ + +#define S3C2410_IICREG(x) (x) + +#define S3C2410_IICCON S3C2410_IICREG(0x00) +#define S3C2410_IICSTAT S3C2410_IICREG(0x04) +#define S3C2410_IICADD S3C2410_IICREG(0x08) +#define S3C2410_IICDS S3C2410_IICREG(0x0C) +#define S3C2440_IICLC S3C2410_IICREG(0x10) + +#define S3C2410_IICCON_ACKEN (1<<7) +#define S3C2410_IICCON_TXDIV_16 (0<<6) +#define S3C2410_IICCON_TXDIV_512 (1<<6) +#define S3C2410_IICCON_IRQEN (1<<5) +#define S3C2410_IICCON_IRQPEND (1<<4) +#define S3C2410_IICCON_SCALE(x) ((x)&15) +#define S3C2410_IICCON_SCALEMASK (0xf) + +#define S3C2410_IICSTAT_MASTER_RX (2<<6) +#define S3C2410_IICSTAT_MASTER_TX (3<<6) +#define S3C2410_IICSTAT_SLAVE_RX (0<<6) +#define S3C2410_IICSTAT_SLAVE_TX (1<<6) +#define S3C2410_IICSTAT_MODEMASK (3<<6) + +#define S3C2410_IICSTAT_START (1<<5) +#define S3C2410_IICSTAT_BUSBUSY (1<<5) +#define S3C2410_IICSTAT_TXRXEN (1<<4) +#define S3C2410_IICSTAT_ARBITR (1<<3) +#define S3C2410_IICSTAT_ASSLAVE (1<<2) +#define S3C2410_IICSTAT_ADDR0 (1<<1) +#define S3C2410_IICSTAT_LASTBIT (1<<0) + +#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) +#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) +#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) +#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) +#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) + +#define S3C2410_IICLC_FILTER_ON (1<<2) + +#endif /* __ASM_ARCH_REGS_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-irqtype.h b/arch/arm/plat-samsung/include/plat/regs-irqtype.h new file mode 100644 index 00000000000..c63cd3fc5ad --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-irqtype.h @@ -0,0 +1,21 @@ +/* arch/arm/plat-s3c/include/plat/regs-irqtype.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C - IRQ detection types. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including + * the S3C64XX +*/ +#define S3C2410_EXTINT_LOWLEV (0x00) +#define S3C2410_EXTINT_HILEV (0x01) +#define S3C2410_EXTINT_FALLEDGE (0x02) +#define S3C2410_EXTINT_RISEEDGE (0x04) +#define S3C2410_EXTINT_BOTHEDGE (0x06) diff --git a/arch/arm/plat-samsung/include/plat/regs-nand.h b/arch/arm/plat-samsung/include/plat/regs-nand.h new file mode 100644 index 00000000000..238efea7b9e --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-nand.h @@ -0,0 +1,123 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-nand.h + * + * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 NAND register definitions +*/ + +#ifndef __ASM_ARM_REGS_NAND +#define __ASM_ARM_REGS_NAND + + +#define S3C2410_NFREG(x) (x) + +#define S3C2410_NFCONF S3C2410_NFREG(0x00) +#define S3C2410_NFCMD S3C2410_NFREG(0x04) +#define S3C2410_NFADDR S3C2410_NFREG(0x08) +#define S3C2410_NFDATA S3C2410_NFREG(0x0C) +#define S3C2410_NFSTAT S3C2410_NFREG(0x10) +#define S3C2410_NFECC S3C2410_NFREG(0x14) + +#define S3C2440_NFCONT S3C2410_NFREG(0x04) +#define S3C2440_NFCMD S3C2410_NFREG(0x08) +#define S3C2440_NFADDR S3C2410_NFREG(0x0C) +#define S3C2440_NFDATA S3C2410_NFREG(0x10) +#define S3C2440_NFECCD0 S3C2410_NFREG(0x14) +#define S3C2440_NFECCD1 S3C2410_NFREG(0x18) +#define S3C2440_NFECCD S3C2410_NFREG(0x1C) +#define S3C2440_NFSTAT S3C2410_NFREG(0x20) +#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24) +#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28) +#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C) +#define S3C2440_NFMECC1 S3C2410_NFREG(0x30) +#define S3C2440_NFSECC S3C2410_NFREG(0x34) +#define S3C2440_NFSBLK S3C2410_NFREG(0x38) +#define S3C2440_NFEBLK S3C2410_NFREG(0x3C) + +#define S3C2412_NFSBLK S3C2410_NFREG(0x20) +#define S3C2412_NFEBLK S3C2410_NFREG(0x24) +#define S3C2412_NFSTAT S3C2410_NFREG(0x28) +#define S3C2412_NFMECC_ERR0 S3C2410_NFREG(0x2C) +#define S3C2412_NFMECC_ERR1 S3C2410_NFREG(0x30) +#define S3C2412_NFMECC0 S3C2410_NFREG(0x34) +#define S3C2412_NFMECC1 S3C2410_NFREG(0x38) +#define S3C2412_NFSECC S3C2410_NFREG(0x3C) + +#define S3C2410_NFCONF_EN (1<<15) +#define S3C2410_NFCONF_512BYTE (1<<14) +#define S3C2410_NFCONF_4STEP (1<<13) +#define S3C2410_NFCONF_INITECC (1<<12) +#define S3C2410_NFCONF_nFCE (1<<11) +#define S3C2410_NFCONF_TACLS(x) ((x)<<8) +#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) +#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) + +#define S3C2410_NFSTAT_BUSY (1<<0) + +#define S3C2440_NFCONF_BUSWIDTH_8 (0<<0) +#define S3C2440_NFCONF_BUSWIDTH_16 (1<<0) +#define S3C2440_NFCONF_ADVFLASH (1<<3) +#define S3C2440_NFCONF_TACLS(x) ((x)<<12) +#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8) +#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4) + +#define S3C2440_NFCONT_LOCKTIGHT (1<<13) +#define S3C2440_NFCONT_SOFTLOCK (1<<12) +#define S3C2440_NFCONT_ILLEGALACC_EN (1<<10) +#define S3C2440_NFCONT_RNBINT_EN (1<<9) +#define S3C2440_NFCONT_RN_FALLING (1<<8) +#define S3C2440_NFCONT_SPARE_ECCLOCK (1<<6) +#define S3C2440_NFCONT_MAIN_ECCLOCK (1<<5) +#define S3C2440_NFCONT_INITECC (1<<4) +#define S3C2440_NFCONT_nFCE (1<<1) +#define S3C2440_NFCONT_ENABLE (1<<0) + +#define S3C2440_NFSTAT_READY (1<<0) +#define S3C2440_NFSTAT_nCE (1<<1) +#define S3C2440_NFSTAT_RnB_CHANGE (1<<2) +#define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3) + +#define S3C2412_NFCONF_NANDBOOT (1<<31) +#define S3C2412_NFCONF_ECCCLKCON (1<<30) +#define S3C2412_NFCONF_ECC_MLC (1<<24) +#define S3C2412_NFCONF_TACLS_MASK (7<<12) /* 1 extra bit of Tacls */ + +#define S3C2412_NFCONT_ECC4_DIRWR (1<<18) +#define S3C2412_NFCONT_LOCKTIGHT (1<<17) +#define S3C2412_NFCONT_SOFTLOCK (1<<16) +#define S3C2412_NFCONT_ECC4_ENCINT (1<<13) +#define S3C2412_NFCONT_ECC4_DECINT (1<<12) +#define S3C2412_NFCONT_MAIN_ECC_LOCK (1<<7) +#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5) +#define S3C2412_NFCONT_nFCE1 (1<<2) +#define S3C2412_NFCONT_nFCE0 (1<<1) + +#define S3C2412_NFSTAT_ECC_ENCDONE (1<<7) +#define S3C2412_NFSTAT_ECC_DECDONE (1<<6) +#define S3C2412_NFSTAT_ILLEGAL_ACCESS (1<<5) +#define S3C2412_NFSTAT_RnB_CHANGE (1<<4) +#define S3C2412_NFSTAT_nFCE1 (1<<3) +#define S3C2412_NFSTAT_nFCE0 (1<<2) +#define S3C2412_NFSTAT_Res1 (1<<1) +#define S3C2412_NFSTAT_READY (1<<0) + +#define S3C2412_NFECCERR_SERRDATA(x) (((x) >> 21) & 0xf) +#define S3C2412_NFECCERR_SERRBIT(x) (((x) >> 18) & 0x7) +#define S3C2412_NFECCERR_MERRDATA(x) (((x) >> 7) & 0x3ff) +#define S3C2412_NFECCERR_MERRBIT(x) (((x) >> 4) & 0x7) +#define S3C2412_NFECCERR_SPARE_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_MAIN_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_NONE (0) +#define S3C2412_NFECCERR_1BIT (1) +#define S3C2412_NFECCERR_MULTIBIT (2) +#define S3C2412_NFECCERR_ECCAREA (3) + + + +#endif /* __ASM_ARM_REGS_NAND */ + diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h new file mode 100644 index 00000000000..d5837cf8e40 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h @@ -0,0 +1,61 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Internal RTC register definition +*/ + +#ifndef __ASM_ARCH_REGS_RTC_H +#define __ASM_ARCH_REGS_RTC_H __FILE__ + +#define S3C2410_RTCREG(x) (x) + +#define S3C2410_RTCCON S3C2410_RTCREG(0x40) +#define S3C2410_RTCCON_RTCEN (1<<0) +#define S3C2410_RTCCON_CLKSEL (1<<1) +#define S3C2410_RTCCON_CNTSEL (1<<2) +#define S3C2410_RTCCON_CLKRST (1<<3) + +#define S3C2410_TICNT S3C2410_RTCREG(0x44) +#define S3C2410_TICNT_ENABLE (1<<7) + +#define S3C2410_RTCALM S3C2410_RTCREG(0x50) +#define S3C2410_RTCALM_ALMEN (1<<6) +#define S3C2410_RTCALM_YEAREN (1<<5) +#define S3C2410_RTCALM_MONEN (1<<4) +#define S3C2410_RTCALM_DAYEN (1<<3) +#define S3C2410_RTCALM_HOUREN (1<<2) +#define S3C2410_RTCALM_MINEN (1<<1) +#define S3C2410_RTCALM_SECEN (1<<0) + +#define S3C2410_RTCALM_ALL \ + S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\ + S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\ + S3C2410_RTCALM_SECEN + + +#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) +#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) +#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) + +#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) +#define S3C2410_ALMMON S3C2410_RTCREG(0x64) +#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) + +#define S3C2410_RTCRST S3C2410_RTCREG(0x6c) + +#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) +#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) +#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) +#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) +#define S3C2410_RTCDAY S3C2410_RTCREG(0x80) +#define S3C2410_RTCMON S3C2410_RTCREG(0x84) +#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) + + +#endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h new file mode 100644 index 00000000000..abf2fbc2eb2 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h @@ -0,0 +1,82 @@ +/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h + * + * Copyright 2007 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H +#define __ASM_ARCH_REGS_S3C2412_IIS_H + +#define S3C2412_IISCON (0x00) +#define S3C2412_IISMOD (0x04) +#define S3C2412_IISFIC (0x08) +#define S3C2412_IISPSR (0x0C) +#define S3C2412_IISTXD (0x10) +#define S3C2412_IISRXD (0x14) + +#define S3C2412_IISCON_LRINDEX (1 << 11) +#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) +#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) +#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) +#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) +#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) +#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) +#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) +#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) +#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) +#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) +#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) + +#define S3C64XX_IISMOD_BLC_16BIT (0 << 13) +#define S3C64XX_IISMOD_BLC_8BIT (1 << 13) +#define S3C64XX_IISMOD_BLC_24BIT (2 << 13) +#define S3C64XX_IISMOD_BLC_MASK (3 << 13) + +#define S3C64XX_IISMOD_IMS_PCLK (0 << 10) +#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10) + +#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) +#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) +#define S3C2412_IISMOD_SLAVE (2 << 10) +#define S3C2412_IISMOD_MASTER_MASK (3 << 10) +#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) +#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) +#define S3C2412_IISMOD_MODE_TXRX (2 << 8) +#define S3C2412_IISMOD_MODE_MASK (3 << 8) +#define S3C2412_IISMOD_LR_LLOW (0 << 7) +#define S3C2412_IISMOD_LR_RLOW (1 << 7) +#define S3C2412_IISMOD_SDF_IIS (0 << 5) +#define S3C2412_IISMOD_SDF_MSB (1 << 5) +#define S3C2412_IISMOD_SDF_LSB (2 << 5) +#define S3C2412_IISMOD_SDF_MASK (3 << 5) +#define S3C2412_IISMOD_RCLK_256FS (0 << 3) +#define S3C2412_IISMOD_RCLK_512FS (1 << 3) +#define S3C2412_IISMOD_RCLK_384FS (2 << 3) +#define S3C2412_IISMOD_RCLK_768FS (3 << 3) +#define S3C2412_IISMOD_RCLK_MASK (3 << 3) +#define S3C2412_IISMOD_BCLK_32FS (0 << 1) +#define S3C2412_IISMOD_BCLK_48FS (1 << 1) +#define S3C2412_IISMOD_BCLK_16FS (2 << 1) +#define S3C2412_IISMOD_BCLK_24FS (3 << 1) +#define S3C2412_IISMOD_BCLK_MASK (3 << 1) +#define S3C2412_IISMOD_8BIT (1 << 0) + +#define S3C64XX_IISMOD_CDCLKCON (1 << 12) + +#define S3C2412_IISPSR_PSREN (1 << 15) + +#define S3C2412_IISFIC_TXFLUSH (1 << 15) +#define S3C2412_IISFIC_RXFLUSH (1 << 7) +#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) + + + +#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ + diff --git a/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h new file mode 100644 index 00000000000..e34049ad44c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-sdhci.h @@ -0,0 +1,87 @@ +/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - SDHCI (HSMMC) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_SDHCI_REGS_H +#define __PLAT_S3C_SDHCI_REGS_H __FILE__ + +#define S3C_SDHCI_CONTROL2 (0x80) +#define S3C_SDHCI_CONTROL3 (0x84) +#define S3C64XX_SDHCI_CONTROL4 (0x8C) + +#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) +#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) +#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) +#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) + +#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) +#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) +#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) +#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) +#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) + +#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) +#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) + +#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) +#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) +#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) +#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) +#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) +#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) +#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) + +#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) +#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) +#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) +#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) + +#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) +#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) +#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) +#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) +#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) +#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) +#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) + +#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) +#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) +#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) + +#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) + +#define S3C64XX_SDHCI_CONTROL4_BUSY (1) + +#endif /* __PLAT_S3C_SDHCI_REGS_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h new file mode 100644 index 00000000000..a6eba8496b2 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -0,0 +1,281 @@ +/* arch/arm/plat-samsung/include/plat/regs-serial.h + * + * From linux/include/asm-arm/hardware/serial_s3c2410.h + * + * Internal header file for Samsung S3C2410 serial ports (UART0-2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) + * + * Adapted from: + * + * Internal header file for MX1ADS serial ports (UART1 & 2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef __ASM_ARM_REGS_SERIAL_H +#define __ASM_ARM_REGS_SERIAL_H + +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) + +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) + +#define S3C2410_URXH (0x24) +#define S3C2410_UTXH (0x20) +#define S3C2410_ULCON (0x00) +#define S3C2410_UCON (0x04) +#define S3C2410_UFCON (0x08) +#define S3C2410_UMCON (0x0C) +#define S3C2410_UBRDIV (0x28) +#define S3C2410_UTRSTAT (0x10) +#define S3C2410_UERSTAT (0x14) +#define S3C2410_UFSTAT (0x18) +#define S3C2410_UMSTAT (0x1C) + +#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) + +#define S3C2410_LCON_CS5 (0x0) +#define S3C2410_LCON_CS6 (0x1) +#define S3C2410_LCON_CS7 (0x2) +#define S3C2410_LCON_CS8 (0x3) +#define S3C2410_LCON_CSMASK (0x3) + +#define S3C2410_LCON_PNONE (0x0) +#define S3C2410_LCON_PEVEN (0x5 << 3) +#define S3C2410_LCON_PODD (0x4 << 3) +#define S3C2410_LCON_PMASK (0x7 << 3) + +#define S3C2410_LCON_STOPB (1<<2) +#define S3C2410_LCON_IRM (1<<6) + +#define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_PCLK (0<<10) +#define S3C2440_UCON_UCLK (1<<10) +#define S3C2440_UCON_PCLK2 (2<<10) +#define S3C2440_UCON_FCLK (3<<10) +#define S3C2443_UCON_EPLL (3<<10) + +#define S3C6400_UCON_CLKMASK (3<<10) +#define S3C6400_UCON_PCLK (0<<10) +#define S3C6400_UCON_PCLK2 (2<<10) +#define S3C6400_UCON_UCLK0 (1<<10) +#define S3C6400_UCON_UCLK1 (3<<10) + +#define S3C2440_UCON2_FCLK_EN (1<<15) +#define S3C2440_UCON0_DIVMASK (15 << 12) +#define S3C2440_UCON1_DIVMASK (15 << 12) +#define S3C2440_UCON2_DIVMASK (7 << 12) +#define S3C2440_UCON_DIVSHIFT (12) + +#define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_UCLK (1<<10) +#define S3C2412_UCON_USYSCLK (3<<10) +#define S3C2412_UCON_PCLK (0<<10) +#define S3C2412_UCON_PCLK2 (2<<10) + +#define S3C2410_UCON_UCLK (1<<10) +#define S3C2410_UCON_SBREAK (1<<4) + +#define S3C2410_UCON_TXILEVEL (1<<9) +#define S3C2410_UCON_RXILEVEL (1<<8) +#define S3C2410_UCON_TXIRQMODE (1<<2) +#define S3C2410_UCON_RXIRQMODE (1<<0) +#define S3C2410_UCON_RXFIFO_TOI (1<<7) +#define S3C2443_UCON_RXERR_IRQEN (1<<6) +#define S3C2443_UCON_LOOPBACK (1<<5) + +#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI) + +#define S3C2410_UFCON_FIFOMODE (1<<0) +#define S3C2410_UFCON_TXTRIG0 (0<<6) +#define S3C2410_UFCON_RXTRIG8 (1<<4) +#define S3C2410_UFCON_RXTRIG12 (2<<4) + +/* S3C2440 FIFO trigger levels */ +#define S3C2440_UFCON_RXTRIG1 (0<<4) +#define S3C2440_UFCON_RXTRIG8 (1<<4) +#define S3C2440_UFCON_RXTRIG16 (2<<4) +#define S3C2440_UFCON_RXTRIG32 (3<<4) + +#define S3C2440_UFCON_TXTRIG0 (0<<6) +#define S3C2440_UFCON_TXTRIG16 (1<<6) +#define S3C2440_UFCON_TXTRIG32 (2<<6) +#define S3C2440_UFCON_TXTRIG48 (3<<6) + +#define S3C2410_UFCON_RESETBOTH (3<<1) +#define S3C2410_UFCON_RESETTX (1<<2) +#define S3C2410_UFCON_RESETRX (1<<1) + +#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2410_UFCON_TXTRIG0 | \ + S3C2410_UFCON_RXTRIG8 ) + +#define S3C2410_UMCOM_AFC (1<<4) +#define S3C2410_UMCOM_RTS_LOW (1<<0) + +#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ +#define S3C2412_UMCON_AFC_56 (1<<5) +#define S3C2412_UMCON_AFC_48 (2<<5) +#define S3C2412_UMCON_AFC_40 (3<<5) +#define S3C2412_UMCON_AFC_32 (4<<5) +#define S3C2412_UMCON_AFC_24 (5<<5) +#define S3C2412_UMCON_AFC_16 (6<<5) +#define S3C2412_UMCON_AFC_8 (7<<5) + +#define S3C2410_UFSTAT_TXFULL (1<<9) +#define S3C2410_UFSTAT_RXFULL (1<<8) +#define S3C2410_UFSTAT_TXMASK (15<<4) +#define S3C2410_UFSTAT_TXSHIFT (4) +#define S3C2410_UFSTAT_RXMASK (15<<0) +#define S3C2410_UFSTAT_RXSHIFT (0) + +/* UFSTAT S3C24A0 */ +#define S3C24A0_UFSTAT_TXFULL (1 << 14) +#define S3C24A0_UFSTAT_RXFULL (1 << 6) +#define S3C24A0_UFSTAT_TXMASK (63 << 8) +#define S3C24A0_UFSTAT_TXSHIFT (8) +#define S3C24A0_UFSTAT_RXMASK (63) +#define S3C24A0_UFSTAT_RXSHIFT (0) + +/* UFSTAT S3C2443 same as S3C2440 */ +#define S3C2440_UFSTAT_TXFULL (1<<14) +#define S3C2440_UFSTAT_RXFULL (1<<6) +#define S3C2440_UFSTAT_TXSHIFT (8) +#define S3C2440_UFSTAT_RXSHIFT (0) +#define S3C2440_UFSTAT_TXMASK (63<<8) +#define S3C2440_UFSTAT_RXMASK (63) + +#define S3C2410_UTRSTAT_TXE (1<<2) +#define S3C2410_UTRSTAT_TXFE (1<<1) +#define S3C2410_UTRSTAT_RXDR (1<<0) + +#define S3C2410_UERSTAT_OVERRUN (1<<0) +#define S3C2410_UERSTAT_FRAME (1<<2) +#define S3C2410_UERSTAT_BREAK (1<<3) +#define S3C2443_UERSTAT_PARITY (1<<1) + +#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ + S3C2410_UERSTAT_FRAME | \ + S3C2410_UERSTAT_BREAK) + +#define S3C2410_UMSTAT_CTS (1<<0) +#define S3C2410_UMSTAT_DeltaCTS (1<<2) + +#define S3C2443_DIVSLOT (0x2C) + +/* S3C64XX interrupt registers. */ +#define S3C64XX_UINTP 0x30 +#define S3C64XX_UINTSP 0x34 +#define S3C64XX_UINTM 0x38 + +/* Following are specific to S5PV210 and S5P6442 */ +#define S5PV210_UCON_CLKMASK (1<<10) +#define S5PV210_UCON_PCLK (0<<10) +#define S5PV210_UCON_UCLK (1<<10) + +#define S5PV210_UFCON_TXTRIG0 (0<<8) +#define S5PV210_UFCON_TXTRIG4 (1<<8) +#define S5PV210_UFCON_TXTRIG8 (2<<8) +#define S5PV210_UFCON_TXTRIG16 (3<<8) +#define S5PV210_UFCON_TXTRIG32 (4<<8) +#define S5PV210_UFCON_TXTRIG64 (5<<8) +#define S5PV210_UFCON_TXTRIG128 (6<<8) +#define S5PV210_UFCON_TXTRIG256 (7<<8) + +#define S5PV210_UFCON_RXTRIG1 (0<<4) +#define S5PV210_UFCON_RXTRIG4 (1<<4) +#define S5PV210_UFCON_RXTRIG8 (2<<4) +#define S5PV210_UFCON_RXTRIG16 (3<<4) +#define S5PV210_UFCON_RXTRIG32 (4<<4) +#define S5PV210_UFCON_RXTRIG64 (5<<4) +#define S5PV210_UFCON_RXTRIG128 (6<<4) +#define S5PV210_UFCON_RXTRIG256 (7<<4) + +#define S5PV210_UFSTAT_TXFULL (1<<24) +#define S5PV210_UFSTAT_RXFULL (1<<8) +#define S5PV210_UFSTAT_TXMASK (255<<16) +#define S5PV210_UFSTAT_TXSHIFT (16) +#define S5PV210_UFSTAT_RXMASK (255<<0) +#define S5PV210_UFSTAT_RXSHIFT (0) + +#ifndef __ASSEMBLY__ + +/* struct s3c24xx_uart_clksrc + * + * this structure defines a named clock source that can be used for the + * uart, so that the best clock can be selected for the requested baud + * rate. + * + * min_baud and max_baud define the range of baud-rates this clock is + * acceptable for, if they are both zero, it is assumed any baud rate that + * can be generated from this clock will be used. + * + * divisor gives the divisor from the clock to the one seen by the uart +*/ + +struct s3c24xx_uart_clksrc { + const char *name; + unsigned int divisor; + unsigned int min_baud; + unsigned int max_baud; +}; + +/* configuration structure for per-machine configurations for the + * serial port + * + * the pointer is setup by the machine specific initialisation from the + * arch/arm/mach-s3c2410/ directory. +*/ + +struct s3c2410_uartcfg { + unsigned char hwport; /* hardware port number */ + unsigned char unused; + unsigned short flags; + upf_t uart_flags; /* default uart flags */ + + unsigned long ucon; /* value of ucon for port */ + unsigned long ulcon; /* value of ulcon for port */ + unsigned long ufcon; /* value of ufcon for port */ + + struct s3c24xx_uart_clksrc *clocks; + unsigned int clocks_size; +}; + +/* s3c24xx_uart_devs + * + * this is exported from the core as we cannot use driver_register(), + * or platform_add_device() before the console_initcall() +*/ + +extern struct platform_device *s3c24xx_uart_devs[4]; + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARM_REGS_SERIAL_H */ + diff --git a/arch/arm/plat-samsung/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h new file mode 100644 index 00000000000..d097d92f8cc --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-timer.h @@ -0,0 +1,124 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-timer.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Timer configuration +*/ + +#ifndef __ASM_ARCH_REGS_TIMER_H +#define __ASM_ARCH_REGS_TIMER_H + +#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) +#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) + +#define S3C2410_TCFG0 S3C_TIMERREG(0x00) +#define S3C2410_TCFG1 S3C_TIMERREG(0x04) +#define S3C2410_TCON S3C_TIMERREG(0x08) + +#define S3C64XX_TINT_CSTAT S3C_TIMERREG(0x44) + +#define S3C2410_TCFG_PRESCALER0_MASK (255<<0) +#define S3C2410_TCFG_PRESCALER1_MASK (255<<8) +#define S3C2410_TCFG_PRESCALER1_SHIFT (8) +#define S3C2410_TCFG_DEADZONE_MASK (255<<16) +#define S3C2410_TCFG_DEADZONE_SHIFT (16) + +#define S3C2410_TCFG1_MUX4_DIV2 (0<<16) +#define S3C2410_TCFG1_MUX4_DIV4 (1<<16) +#define S3C2410_TCFG1_MUX4_DIV8 (2<<16) +#define S3C2410_TCFG1_MUX4_DIV16 (3<<16) +#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16) +#define S3C2410_TCFG1_MUX4_MASK (15<<16) +#define S3C2410_TCFG1_MUX4_SHIFT (16) + +#define S3C2410_TCFG1_MUX3_DIV2 (0<<12) +#define S3C2410_TCFG1_MUX3_DIV4 (1<<12) +#define S3C2410_TCFG1_MUX3_DIV8 (2<<12) +#define S3C2410_TCFG1_MUX3_DIV16 (3<<12) +#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12) +#define S3C2410_TCFG1_MUX3_MASK (15<<12) + + +#define S3C2410_TCFG1_MUX2_DIV2 (0<<8) +#define S3C2410_TCFG1_MUX2_DIV4 (1<<8) +#define S3C2410_TCFG1_MUX2_DIV8 (2<<8) +#define S3C2410_TCFG1_MUX2_DIV16 (3<<8) +#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8) +#define S3C2410_TCFG1_MUX2_MASK (15<<8) + + +#define S3C2410_TCFG1_MUX1_DIV2 (0<<4) +#define S3C2410_TCFG1_MUX1_DIV4 (1<<4) +#define S3C2410_TCFG1_MUX1_DIV8 (2<<4) +#define S3C2410_TCFG1_MUX1_DIV16 (3<<4) +#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4) +#define S3C2410_TCFG1_MUX1_MASK (15<<4) + +#define S3C2410_TCFG1_MUX0_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX0_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX0_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX0_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0) +#define S3C2410_TCFG1_MUX0_MASK (15<<0) + +#define S3C2410_TCFG1_MUX_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX_TCLK (4<<0) +#define S3C2410_TCFG1_MUX_MASK (15<<0) + +#define S3C64XX_TCFG1_MUX_DIV1 (0<<0) +#define S3C64XX_TCFG1_MUX_DIV2 (1<<0) +#define S3C64XX_TCFG1_MUX_DIV4 (2<<0) +#define S3C64XX_TCFG1_MUX_DIV8 (3<<0) +#define S3C64XX_TCFG1_MUX_DIV16 (4<<0) +#define S3C64XX_TCFG1_MUX_TCLK (5<<0) /* 3 sets of TCLK */ +#define S3C64XX_TCFG1_MUX_MASK (15<<0) + +#define S3C2410_TCFG1_SHIFT(x) ((x) * 4) + +/* for each timer, we have an count buffer, an compare buffer and + * an observation buffer +*/ + +/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ + +#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00) +#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04) +#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) + +#define S3C2410_TCON_T4RELOAD (1<<22) +#define S3C2410_TCON_T4MANUALUPD (1<<21) +#define S3C2410_TCON_T4START (1<<20) + +#define S3C2410_TCON_T3RELOAD (1<<19) +#define S3C2410_TCON_T3INVERT (1<<18) +#define S3C2410_TCON_T3MANUALUPD (1<<17) +#define S3C2410_TCON_T3START (1<<16) + +#define S3C2410_TCON_T2RELOAD (1<<15) +#define S3C2410_TCON_T2INVERT (1<<14) +#define S3C2410_TCON_T2MANUALUPD (1<<13) +#define S3C2410_TCON_T2START (1<<12) + +#define S3C2410_TCON_T1RELOAD (1<<11) +#define S3C2410_TCON_T1INVERT (1<<10) +#define S3C2410_TCON_T1MANUALUPD (1<<9) +#define S3C2410_TCON_T1START (1<<8) + +#define S3C2410_TCON_T0DEADZONE (1<<4) +#define S3C2410_TCON_T0RELOAD (1<<3) +#define S3C2410_TCON_T0INVERT (1<<2) +#define S3C2410_TCON_T0MANUALUPD (1<<1) +#define S3C2410_TCON_T0START (1<<0) + +#endif /* __ASM_ARCH_REGS_TIMER_H */ + + + diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h new file mode 100644 index 00000000000..a111ad87183 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h @@ -0,0 +1,50 @@ +/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - USB2.0 Highspeed/OtG device PHY registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Note, this is a separate header file as some of the clock framework + * needs to touch this if the clk_48m is used as the USB OHCI or other + * peripheral source. +*/ + +#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H +#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__ + +/* S3C64XX_PA_USB_HSPHY */ + +#define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY) + +#define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00) +#define SRC_PHYPWR_OTG_DISABLE (1 << 4) +#define SRC_PHYPWR_ANALOG_POWERDOWN (1 << 3) +#define SRC_PHYPWR_FORCE_SUSPEND (1 << 1) + +#define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04) +#define S3C_PHYCLK_MODE_USB11 (1 << 6) +#define S3C_PHYCLK_EXT_OSC (1 << 5) +#define S3C_PHYCLK_CLK_FORCE (1 << 4) +#define S3C_PHYCLK_ID_PULL (1 << 2) +#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0) +#define S3C_PHYCLK_CLKSEL_SHIFT (0) +#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0) +#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0) +#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0) + +#define S3C_RSTCON S3C_HSOTG_PHYREG(0x08) +#define S3C_RSTCON_PHYCLK (1 << 2) +#define S3C_RSTCON_HCLK (1 << 2) +#define S3C_RSTCON_PHY (1 << 0) + +#define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20) + +#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h new file mode 100644 index 00000000000..8d18d9d4d14 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h @@ -0,0 +1,377 @@ +/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - USB2.0 Highspeed/OtG device block registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H +#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__ + +#define S3C_HSOTG_REG(x) (x) + +#define S3C_GOTGCTL S3C_HSOTG_REG(0x000) +#define S3C_GOTGCTL_BSESVLD (1 << 19) +#define S3C_GOTGCTL_ASESVLD (1 << 18) +#define S3C_GOTGCTL_DBNC_SHORT (1 << 17) +#define S3C_GOTGCTL_CONID_B (1 << 16) +#define S3C_GOTGCTL_DEVHNPEN (1 << 11) +#define S3C_GOTGCTL_HSSETHNPEN (1 << 10) +#define S3C_GOTGCTL_HNPREQ (1 << 9) +#define S3C_GOTGCTL_HSTNEGSCS (1 << 8) +#define S3C_GOTGCTL_SESREQ (1 << 1) +#define S3C_GOTGCTL_SESREQSCS (1 << 0) + +#define S3C_GOTGINT S3C_HSOTG_REG(0x004) +#define S3C_GOTGINT_DbnceDone (1 << 19) +#define S3C_GOTGINT_ADevTOUTChg (1 << 18) +#define S3C_GOTGINT_HstNegDet (1 << 17) +#define S3C_GOTGINT_HstnegSucStsChng (1 << 9) +#define S3C_GOTGINT_SesReqSucStsChng (1 << 8) +#define S3C_GOTGINT_SesEndDet (1 << 2) + +#define S3C_GAHBCFG S3C_HSOTG_REG(0x008) +#define S3C_GAHBCFG_PTxFEmpLvl (1 << 8) +#define S3C_GAHBCFG_NPTxFEmpLvl (1 << 7) +#define S3C_GAHBCFG_DMAEn (1 << 5) +#define S3C_GAHBCFG_HBstLen_MASK (0xf << 1) +#define S3C_GAHBCFG_HBstLen_SHIFT (1) +#define S3C_GAHBCFG_HBstLen_Single (0x0 << 1) +#define S3C_GAHBCFG_HBstLen_Incr (0x1 << 1) +#define S3C_GAHBCFG_HBstLen_Incr4 (0x3 << 1) +#define S3C_GAHBCFG_HBstLen_Incr8 (0x5 << 1) +#define S3C_GAHBCFG_HBstLen_Incr16 (0x7 << 1) +#define S3C_GAHBCFG_GlblIntrEn (1 << 0) + +#define S3C_GUSBCFG S3C_HSOTG_REG(0x00C) +#define S3C_GUSBCFG_PHYLPClkSel (1 << 15) +#define S3C_GUSBCFG_HNPCap (1 << 9) +#define S3C_GUSBCFG_SRPCap (1 << 8) +#define S3C_GUSBCFG_PHYIf16 (1 << 3) +#define S3C_GUSBCFG_TOutCal_MASK (0x7 << 0) +#define S3C_GUSBCFG_TOutCal_SHIFT (0) +#define S3C_GUSBCFG_TOutCal_LIMIT (0x7) +#define S3C_GUSBCFG_TOutCal(_x) ((_x) << 0) + +#define S3C_GRSTCTL S3C_HSOTG_REG(0x010) + +#define S3C_GRSTCTL_AHBIdle (1 << 31) +#define S3C_GRSTCTL_DMAReq (1 << 30) +#define S3C_GRSTCTL_TxFNum_MASK (0x1f << 6) +#define S3C_GRSTCTL_TxFNum_SHIFT (6) +#define S3C_GRSTCTL_TxFNum_LIMIT (0x1f) +#define S3C_GRSTCTL_TxFNum(_x) ((_x) << 6) +#define S3C_GRSTCTL_TxFFlsh (1 << 5) +#define S3C_GRSTCTL_RxFFlsh (1 << 4) +#define S3C_GRSTCTL_INTknQFlsh (1 << 3) +#define S3C_GRSTCTL_FrmCntrRst (1 << 2) +#define S3C_GRSTCTL_HSftRst (1 << 1) +#define S3C_GRSTCTL_CSftRst (1 << 0) + +#define S3C_GINTSTS S3C_HSOTG_REG(0x014) +#define S3C_GINTMSK S3C_HSOTG_REG(0x018) + +#define S3C_GINTSTS_WkUpInt (1 << 31) +#define S3C_GINTSTS_SessReqInt (1 << 30) +#define S3C_GINTSTS_DisconnInt (1 << 29) +#define S3C_GINTSTS_ConIDStsChng (1 << 28) +#define S3C_GINTSTS_PTxFEmp (1 << 26) +#define S3C_GINTSTS_HChInt (1 << 25) +#define S3C_GINTSTS_PrtInt (1 << 24) +#define S3C_GINTSTS_FetSusp (1 << 22) +#define S3C_GINTSTS_incompIP (1 << 21) +#define S3C_GINTSTS_IncomplSOIN (1 << 20) +#define S3C_GINTSTS_OEPInt (1 << 19) +#define S3C_GINTSTS_IEPInt (1 << 18) +#define S3C_GINTSTS_EPMis (1 << 17) +#define S3C_GINTSTS_EOPF (1 << 15) +#define S3C_GINTSTS_ISOutDrop (1 << 14) +#define S3C_GINTSTS_EnumDone (1 << 13) +#define S3C_GINTSTS_USBRst (1 << 12) +#define S3C_GINTSTS_USBSusp (1 << 11) +#define S3C_GINTSTS_ErlySusp (1 << 10) +#define S3C_GINTSTS_GOUTNakEff (1 << 7) +#define S3C_GINTSTS_GINNakEff (1 << 6) +#define S3C_GINTSTS_NPTxFEmp (1 << 5) +#define S3C_GINTSTS_RxFLvl (1 << 4) +#define S3C_GINTSTS_SOF (1 << 3) +#define S3C_GINTSTS_OTGInt (1 << 2) +#define S3C_GINTSTS_ModeMis (1 << 1) +#define S3C_GINTSTS_CurMod_Host (1 << 0) + +#define S3C_GRXSTSR S3C_HSOTG_REG(0x01C) +#define S3C_GRXSTSP S3C_HSOTG_REG(0x020) + +#define S3C_GRXSTS_FN_MASK (0x7f << 25) +#define S3C_GRXSTS_FN_SHIFT (25) + +#define S3C_GRXSTS_PktSts_MASK (0xf << 17) +#define S3C_GRXSTS_PktSts_SHIFT (17) +#define S3C_GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) +#define S3C_GRXSTS_PktSts_OutRX (0x2 << 17) +#define S3C_GRXSTS_PktSts_OutDone (0x3 << 17) +#define S3C_GRXSTS_PktSts_SetupDone (0x4 << 17) +#define S3C_GRXSTS_PktSts_SetupRX (0x6 << 17) + +#define S3C_GRXSTS_DPID_MASK (0x3 << 15) +#define S3C_GRXSTS_DPID_SHIFT (15) +#define S3C_GRXSTS_ByteCnt_MASK (0x7ff << 4) +#define S3C_GRXSTS_ByteCnt_SHIFT (4) +#define S3C_GRXSTS_EPNum_MASK (0xf << 0) +#define S3C_GRXSTS_EPNum_SHIFT (0) + +#define S3C_GRXFSIZ S3C_HSOTG_REG(0x024) + +#define S3C_GNPTXFSIZ S3C_HSOTG_REG(0x028) + +#define S3C_GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) +#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT (16) +#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) +#define S3C_GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) +#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) +#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT (0) +#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) +#define S3C_GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) + +#define S3C_GNPTXSTS S3C_HSOTG_REG(0x02C) + +#define S3C_GNPTXSTS_NPtxQTop_MASK (0x7f << 24) +#define S3C_GNPTXSTS_NPtxQTop_SHIFT (24) + +#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) +#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT (16) +#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) + +#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) +#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT (0) +#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) + + +#define S3C_HPTXFSIZ S3C_HSOTG_REG(0x100) + +#define S3C_DPTXFSIZn(_a) S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4)) + +#define S3C_DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) +#define S3C_DPTXFSIZn_DPTxFSize_SHIFT (16) +#define S3C_DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) +#define S3C_DPTXFSIZn_DPTxFSize_LIMIT (0xffff) +#define S3C_DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) + +#define S3C_DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) +#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT (0) + +/* Device mode registers */ +#define S3C_DCFG S3C_HSOTG_REG(0x800) + +#define S3C_DCFG_EPMisCnt_MASK (0x1f << 18) +#define S3C_DCFG_EPMisCnt_SHIFT (18) +#define S3C_DCFG_EPMisCnt_LIMIT (0x1f) +#define S3C_DCFG_EPMisCnt(_x) ((_x) << 18) + +#define S3C_DCFG_PerFrInt_MASK (0x3 << 11) +#define S3C_DCFG_PerFrInt_SHIFT (11) +#define S3C_DCFG_PerFrInt_LIMIT (0x3) +#define S3C_DCFG_PerFrInt(_x) ((_x) << 11) + +#define S3C_DCFG_DevAddr_MASK (0x7f << 4) +#define S3C_DCFG_DevAddr_SHIFT (4) +#define S3C_DCFG_DevAddr_LIMIT (0x7f) +#define S3C_DCFG_DevAddr(_x) ((_x) << 4) + +#define S3C_DCFG_NZStsOUTHShk (1 << 2) + +#define S3C_DCFG_DevSpd_MASK (0x3 << 0) +#define S3C_DCFG_DevSpd_SHIFT (0) +#define S3C_DCFG_DevSpd_HS (0x0 << 0) +#define S3C_DCFG_DevSpd_FS (0x1 << 0) +#define S3C_DCFG_DevSpd_LS (0x2 << 0) +#define S3C_DCFG_DevSpd_FS48 (0x3 << 0) + +#define S3C_DCTL S3C_HSOTG_REG(0x804) + +#define S3C_DCTL_PWROnPrgDone (1 << 11) +#define S3C_DCTL_CGOUTNak (1 << 10) +#define S3C_DCTL_SGOUTNak (1 << 9) +#define S3C_DCTL_CGNPInNAK (1 << 8) +#define S3C_DCTL_SGNPInNAK (1 << 7) +#define S3C_DCTL_TstCtl_MASK (0x7 << 4) +#define S3C_DCTL_TstCtl_SHIFT (4) +#define S3C_DCTL_GOUTNakSts (1 << 3) +#define S3C_DCTL_GNPINNakSts (1 << 2) +#define S3C_DCTL_SftDiscon (1 << 1) +#define S3C_DCTL_RmtWkUpSig (1 << 0) + +#define S3C_DSTS S3C_HSOTG_REG(0x808) + +#define S3C_DSTS_SOFFN_MASK (0x3fff << 8) +#define S3C_DSTS_SOFFN_SHIFT (8) +#define S3C_DSTS_SOFFN_LIMIT (0x3fff) +#define S3C_DSTS_SOFFN(_x) ((_x) << 8) +#define S3C_DSTS_ErraticErr (1 << 3) +#define S3C_DSTS_EnumSpd_MASK (0x3 << 1) +#define S3C_DSTS_EnumSpd_SHIFT (1) +#define S3C_DSTS_EnumSpd_HS (0x0 << 1) +#define S3C_DSTS_EnumSpd_FS (0x1 << 1) +#define S3C_DSTS_EnumSpd_LS (0x2 << 1) +#define S3C_DSTS_EnumSpd_FS48 (0x3 << 1) + +#define S3C_DSTS_SuspSts (1 << 0) + +#define S3C_DIEPMSK S3C_HSOTG_REG(0x810) + +#define S3C_DIEPMSK_INEPNakEffMsk (1 << 6) +#define S3C_DIEPMSK_INTknEPMisMsk (1 << 5) +#define S3C_DIEPMSK_INTknTXFEmpMsk (1 << 4) +#define S3C_DIEPMSK_TimeOUTMsk (1 << 3) +#define S3C_DIEPMSK_AHBErrMsk (1 << 2) +#define S3C_DIEPMSK_EPDisbldMsk (1 << 1) +#define S3C_DIEPMSK_XferComplMsk (1 << 0) + +#define S3C_DOEPMSK S3C_HSOTG_REG(0x814) + +#define S3C_DOEPMSK_Back2BackSetup (1 << 6) +#define S3C_DOEPMSK_OUTTknEPdisMsk (1 << 4) +#define S3C_DOEPMSK_SetupMsk (1 << 3) +#define S3C_DOEPMSK_AHBErrMsk (1 << 2) +#define S3C_DOEPMSK_EPDisbldMsk (1 << 1) +#define S3C_DOEPMSK_XferComplMsk (1 << 0) + +#define S3C_DAINT S3C_HSOTG_REG(0x818) +#define S3C_DAINTMSK S3C_HSOTG_REG(0x81C) + +#define S3C_DAINT_OutEP_SHIFT (16) +#define S3C_DAINT_OutEP(x) (1 << ((x) + 16)) +#define S3C_DAINT_InEP(x) (1 << (x)) + +#define S3C_DTKNQR1 S3C_HSOTG_REG(0x820) +#define S3C_DTKNQR2 S3C_HSOTG_REG(0x824) +#define S3C_DTKNQR3 S3C_HSOTG_REG(0x830) +#define S3C_DTKNQR4 S3C_HSOTG_REG(0x834) + +#define S3C_DVBUSDIS S3C_HSOTG_REG(0x828) +#define S3C_DVBUSPULSE S3C_HSOTG_REG(0x82C) + +#define S3C_DIEPCTL0 S3C_HSOTG_REG(0x900) +#define S3C_DOEPCTL0 S3C_HSOTG_REG(0xB00) +#define S3C_DIEPCTL(_a) S3C_HSOTG_REG(0x900 + ((_a) * 0x20)) +#define S3C_DOEPCTL(_a) S3C_HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting differenct for EP0 +*/ +#define S3C_D0EPCTL_MPS_MASK (0x3 << 0) +#define S3C_D0EPCTL_MPS_SHIFT (0) +#define S3C_D0EPCTL_MPS_64 (0x0 << 0) +#define S3C_D0EPCTL_MPS_32 (0x1 << 0) +#define S3C_D0EPCTL_MPS_16 (0x2 << 0) +#define S3C_D0EPCTL_MPS_8 (0x3 << 0) + +#define S3C_DxEPCTL_EPEna (1 << 31) +#define S3C_DxEPCTL_EPDis (1 << 30) +#define S3C_DxEPCTL_SetD1PID (1 << 29) +#define S3C_DxEPCTL_SetOddFr (1 << 29) +#define S3C_DxEPCTL_SetD0PID (1 << 28) +#define S3C_DxEPCTL_SetEvenFr (1 << 28) +#define S3C_DxEPCTL_SNAK (1 << 27) +#define S3C_DxEPCTL_CNAK (1 << 26) +#define S3C_DxEPCTL_TxFNum_MASK (0xf << 22) +#define S3C_DxEPCTL_TxFNum_SHIFT (22) +#define S3C_DxEPCTL_TxFNum_LIMIT (0xf) +#define S3C_DxEPCTL_TxFNum(_x) ((_x) << 22) + +#define S3C_DxEPCTL_Stall (1 << 21) +#define S3C_DxEPCTL_Snp (1 << 20) +#define S3C_DxEPCTL_EPType_MASK (0x3 << 18) +#define S3C_DxEPCTL_EPType_SHIFT (18) +#define S3C_DxEPCTL_EPType_Control (0x0 << 18) +#define S3C_DxEPCTL_EPType_Iso (0x1 << 18) +#define S3C_DxEPCTL_EPType_Bulk (0x2 << 18) +#define S3C_DxEPCTL_EPType_Intterupt (0x3 << 18) + +#define S3C_DxEPCTL_NAKsts (1 << 17) +#define S3C_DxEPCTL_DPID (1 << 16) +#define S3C_DxEPCTL_EOFrNum (1 << 16) +#define S3C_DxEPCTL_USBActEp (1 << 15) +#define S3C_DxEPCTL_NextEp_MASK (0xf << 11) +#define S3C_DxEPCTL_NextEp_SHIFT (11) +#define S3C_DxEPCTL_NextEp_LIMIT (0xf) +#define S3C_DxEPCTL_NextEp(_x) ((_x) << 11) + +#define S3C_DxEPCTL_MPS_MASK (0x7ff << 0) +#define S3C_DxEPCTL_MPS_SHIFT (0) +#define S3C_DxEPCTL_MPS_LIMIT (0x7ff) +#define S3C_DxEPCTL_MPS(_x) ((_x) << 0) + +#define S3C_DIEPINT(_a) S3C_HSOTG_REG(0x908 + ((_a) * 0x20)) +#define S3C_DOEPINT(_a) S3C_HSOTG_REG(0xB08 + ((_a) * 0x20)) + +#define S3C_DxEPINT_INEPNakEff (1 << 6) +#define S3C_DxEPINT_Back2BackSetup (1 << 6) +#define S3C_DxEPINT_INTknEPMis (1 << 5) +#define S3C_DxEPINT_INTknTXFEmp (1 << 4) +#define S3C_DxEPINT_OUTTknEPdis (1 << 4) +#define S3C_DxEPINT_Timeout (1 << 3) +#define S3C_DxEPINT_Setup (1 << 3) +#define S3C_DxEPINT_AHBErr (1 << 2) +#define S3C_DxEPINT_EPDisbld (1 << 1) +#define S3C_DxEPINT_XferCompl (1 << 0) + +#define S3C_DIEPTSIZ0 S3C_HSOTG_REG(0x910) + +#define S3C_DIEPTSIZ0_PktCnt_MASK (0x3 << 19) +#define S3C_DIEPTSIZ0_PktCnt_SHIFT (19) +#define S3C_DIEPTSIZ0_PktCnt_LIMIT (0x3) +#define S3C_DIEPTSIZ0_PktCnt(_x) ((_x) << 19) + +#define S3C_DIEPTSIZ0_XferSize_MASK (0x7f << 0) +#define S3C_DIEPTSIZ0_XferSize_SHIFT (0) +#define S3C_DIEPTSIZ0_XferSize_LIMIT (0x7f) +#define S3C_DIEPTSIZ0_XferSize(_x) ((_x) << 0) + + +#define DOEPTSIZ0 S3C_HSOTG_REG(0xB10) +#define S3C_DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) +#define S3C_DOEPTSIZ0_SUPCnt_SHIFT (29) +#define S3C_DOEPTSIZ0_SUPCnt_LIMIT (0x3) +#define S3C_DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) + +#define S3C_DOEPTSIZ0_PktCnt (1 << 19) +#define S3C_DOEPTSIZ0_XferSize_MASK (0x7f << 0) +#define S3C_DOEPTSIZ0_XferSize_SHIFT (0) + +#define S3C_DIEPTSIZ(_a) S3C_HSOTG_REG(0x910 + ((_a) * 0x20)) +#define S3C_DOEPTSIZ(_a) S3C_HSOTG_REG(0xB10 + ((_a) * 0x20)) + +#define S3C_DxEPTSIZ_MC_MASK (0x3 << 29) +#define S3C_DxEPTSIZ_MC_SHIFT (29) +#define S3C_DxEPTSIZ_MC_LIMIT (0x3) +#define S3C_DxEPTSIZ_MC(_x) ((_x) << 29) + +#define S3C_DxEPTSIZ_PktCnt_MASK (0x3ff << 19) +#define S3C_DxEPTSIZ_PktCnt_SHIFT (19) +#define S3C_DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) +#define S3C_DxEPTSIZ_PktCnt_LIMIT (0x3ff) +#define S3C_DxEPTSIZ_PktCnt(_x) ((_x) << 19) + +#define S3C_DxEPTSIZ_XferSize_MASK (0x7ffff << 0) +#define S3C_DxEPTSIZ_XferSize_SHIFT (0) +#define S3C_DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) +#define S3C_DxEPTSIZ_XferSize_LIMIT (0x7ffff) +#define S3C_DxEPTSIZ_XferSize(_x) ((_x) << 0) + + +#define S3C_DIEPDMA(_a) S3C_HSOTG_REG(0x914 + ((_a) * 0x20)) +#define S3C_DOEPDMA(_a) S3C_HSOTG_REG(0xB14 + ((_a) * 0x20)) + +#define S3C_EPFIFO(_a) S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-watchdog.h b/arch/arm/plat-samsung/include/plat/regs-watchdog.h new file mode 100644 index 00000000000..4938492470f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-watchdog.h @@ -0,0 +1,41 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Watchdog timer control +*/ + + +#ifndef __ASM_ARCH_REGS_WATCHDOG_H +#define __ASM_ARCH_REGS_WATCHDOG_H + +#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG) + +#define S3C2410_WTCON S3C_WDOGREG(0x00) +#define S3C2410_WTDAT S3C_WDOGREG(0x04) +#define S3C2410_WTCNT S3C_WDOGREG(0x08) + +/* the watchdog can either generate a reset pulse, or an + * interrupt. + */ + +#define S3C2410_WTCON_RSTEN (0x01) +#define S3C2410_WTCON_INTEN (1<<2) +#define S3C2410_WTCON_ENABLE (1<<5) + +#define S3C2410_WTCON_DIV16 (0<<3) +#define S3C2410_WTCON_DIV32 (1<<3) +#define S3C2410_WTCON_DIV64 (2<<3) +#define S3C2410_WTCON_DIV128 (3<<3) + +#define S3C2410_WTCON_PRESCALE(x) ((x) << 8) +#define S3C2410_WTCON_PRESCALE_MASK (0xff00) + +#endif /* __ASM_ARCH_REGS_WATCHDOG_H */ + + diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h new file mode 100644 index 00000000000..d1772414931 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -0,0 +1,67 @@ +/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S3C64XX_PLAT_SPI_H +#define __S3C64XX_PLAT_SPI_H + +/** + * struct s3c64xx_spi_csinfo - ChipSelect description + * @fb_delay: Slave specific feedback delay. + * Refer to FB_CLK_SEL register definition in SPI chapter. + * @line: Custom 'identity' of the CS line. + * @set_level: CS line control. + * + * This is per SPI-Slave Chipselect information. + * Allocate and initialize one in machine init code and make the + * spi_board_info.controller_data point to it. + */ +struct s3c64xx_spi_csinfo { + u8 fb_delay; + unsigned line; + void (*set_level)(unsigned line_id, int lvl); +}; + +/** + * struct s3c64xx_spi_info - SPI Controller defining structure + * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. + * @src_clk_name: Platform name of the corresponding clock. + * @num_cs: Number of CS this controller emulates. + * @cfg_gpio: Configure pins for this SPI controller. + * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 + * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number + * @high_speed: If the controller supports HIGH_SPEED_EN bit + */ +struct s3c64xx_spi_info { + int src_clk_nr; + char *src_clk_name; + + int num_cs; + + int (*cfg_gpio)(struct platform_device *pdev); + + /* Following two fields are for future compatibility */ + int fifo_lvl_mask; + int rx_lvl_offset; + int high_speed; +}; + +/** + * s3c64xx_spi_set_info - SPI Controller configure callback by the board + * initialization code. + * @cntrlr: SPI controller number the configuration is for. + * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. + * @num_cs: Number of elements in the 'cs' array. + * + * Call this from machine init code for each SPI Controller that + * has some chips attached to it. + */ +extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); + +#endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h new file mode 100644 index 00000000000..7d07cd7aa4f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -0,0 +1,221 @@ +/* linux/arch/arm/plat-s3c/include/plat/sdhci.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - SDHCI (HSMMC) platform data definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_SDHCI_H +#define __PLAT_S3C_SDHCI_H __FILE__ + +struct platform_device; +struct mmc_host; +struct mmc_card; +struct mmc_ios; + +/** + * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI + * @max_width: The maximum number of data bits supported. + * @host_caps: Standard MMC host capabilities bit field. + * @cfg_gpio: Configure the GPIO for a specific card bit-width + * @cfg_card: Configure the interface for a specific card and speed. This + * is necessary the controllers and/or GPIO blocks require the + * changing of driver-strength and other controls dependant on + * the card and speed of operation. + * + * Initialisation data specific to either the machine or the platform + * for the device driver to use or call-back when configuring gpio or + * card speed information. +*/ +struct s3c_sdhci_platdata { + unsigned int max_width; + unsigned int host_caps; + + char **clocks; /* set of clock sources */ + + void (*cfg_gpio)(struct platform_device *dev, int width); + void (*cfg_card)(struct platform_device *dev, + void __iomem *regbase, + struct mmc_ios *ios, + struct mmc_card *card); +}; + +/** + * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device. + * @pd: Platform data to register to device. + * + * Register the given platform data for use withe S3C SDHCI device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); +extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); +extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd); + +/* Default platform data, exported so that per-cpu initialisation can + * set the correct one when there are more than one cpu type selected. +*/ + +extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; +extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; +extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; + +/* Helper function availablity */ + +extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); + +/* S3C6400 SDHCI setup */ + +#ifdef CONFIG_S3C64XX_SETUP_SDHCI +extern char *s3c64xx_hsmmc_clksrcs[4]; + +#ifdef CONFIG_S3C_DEV_HSMMC +extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +static inline void s3c6400_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +} + +#else +static inline void s3c6400_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s3c6400_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +} +#else +static inline void s3c6400_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s3c6400_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; +} +#else +static inline void s3c6400_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC2 */ + +/* S3C6410 SDHCI setup */ + +extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +#ifdef CONFIG_S3C_DEV_HSMMC +static inline void s3c6410_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; +} +#else +static inline void s3c6410_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s3c6410_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; +} +#else +static inline void s3c6410_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s3c6410_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; +} +#else +static inline void s3c6410_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC2 */ + +#else +static inline void s3c6410_default_sdhci0(void) { } +static inline void s3c6410_default_sdhci1(void) { } +static inline void s3c6400_default_sdhci0(void) { } +static inline void s3c6400_default_sdhci1(void) { } + +#endif /* CONFIG_S3C64XX_SETUP_SDHCI */ + +/* S5PC100 SDHCI setup */ + +#ifdef CONFIG_S5PC100_SETUP_SDHCI +extern char *s5pc100_hsmmc_clksrcs[4]; + +extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +#ifdef CONFIG_S3C_DEV_HSMMC +static inline void s5pc100_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +} +#else +static inline void s5pc100_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s5pc100_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +} +#else +static inline void s5pc100_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s5pc100_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; +} +#else +static inline void s5pc100_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + + +#else +static inline void s5pc100_default_sdhci0(void) { } +static inline void s5pc100_default_sdhci1(void) { } +static inline void s5pc100_default_sdhci2(void) { } +#endif /* CONFIG_S5PC100_SETUP_SDHCI */ + +#endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-samsung/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h new file mode 100644 index 00000000000..a22a4f2eea9 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/udc-hs.h @@ -0,0 +1,29 @@ +/* arch/arm/plat-s3c/include/plat/udc-hs.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C USB2.0 High-speed / OtG platform information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +enum s3c_hsotg_dmamode { + S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ + S3C_HSOTG_DMA_ONLY, /* always use DMA */ + S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ +}; + +/** + * struct s3c_hsotg_plat - platform data for high-speed otg/udc + * @dma: Whether to use DMA or not. + * @is_osc: The clock source is an oscillator, not a crystal + */ +struct s3c_hsotg_plat { + enum s3c_hsotg_dmamode dma; + unsigned int is_osc : 1; +}; diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h new file mode 100644 index 00000000000..7d6ed7263d5 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -0,0 +1,184 @@ +/* arch/arm/plat-samsung/include/plat/uncompress.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_UNCOMPRESS_H +#define __ASM_PLAT_UNCOMPRESS_H + +typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ + +/* uart setup */ + +static unsigned int fifo_mask; +static unsigned int fifo_max; + +/* forward declerations */ + +static void arch_detect_cpu(void); + +/* defines for UART registers */ + +#include <plat/regs-serial.h> +#include <plat/regs-watchdog.h> + +/* working in physical space... */ +#undef S3C2410_WDOGREG +#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +/* how many bytes we allow into the FIFO at a time in FIFO mode */ +#define FIFO_MAX (14) + +#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT) + +static __inline__ void +uart_wr(unsigned int reg, unsigned int val) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + *ptr = val; +} + +static __inline__ unsigned int +uart_rd(unsigned int reg) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + return *ptr; +} + +/* we can deal with the case the UARTs are being run + * in FIFO mode, so that we don't hold up our execution + * waiting for tx to happen... +*/ + +static void putc(int ch) +{ + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { + int level; + + while (1) { + level = uart_rd(S3C2410_UFSTAT); + level &= fifo_mask; + + if (level < fifo_max) + break; + } + + } else { + /* not using fifos */ + + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); + } + + /* write byte to transmission register */ + uart_wr(S3C2410_UTXH, ch); +} + +static inline void flush(void) +{ +} + +#define __raw_writel(d, ad) \ + do { \ + *((volatile unsigned int __force *)(ad)) = (d); \ + } while (0) + +/* CONFIG_S3C_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process +*/ + +#ifdef CONFIG_S3C_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +#ifdef CONFIG_S3C_BOOT_ERROR_RESET + +static void arch_decomp_error(const char *x) +{ + putstr("\n\n"); + putstr(x); + putstr("\n\n -- System resetting\n"); + + __raw_writel(0x4000, S3C2410_WTDAT); + __raw_writel(0x4000, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + + while(1); +} + +#define arch_error arch_decomp_error +#endif + +#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO +static inline void arch_enable_uart_fifo(void) +{ + u32 fifocon = uart_rd(S3C2410_UFCON); + + if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { + fifocon |= S3C2410_UFCON_RESETBOTH; + uart_wr(S3C2410_UFCON, fifocon); + + /* wait for fifo reset to complete */ + while (1) { + fifocon = uart_rd(S3C2410_UFCON); + if (!(fifocon & S3C2410_UFCON_RESETBOTH)) + break; + } + } +} +#else +#define arch_enable_uart_fifo() do { } while(0) +#endif + + +static void +arch_decomp_setup(void) +{ + /* we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_detect_cpu(); + arch_decomp_wdog_start(); + + /* Enable the UART FIFOs if they where not enabled and our + * configuration says we should turn them on. + */ + + arch_enable_uart_fifo(); +} + + +#endif /* __ASM_PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/plat-samsung/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h new file mode 100644 index 00000000000..7fa1fbefc3f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/usb-control.h @@ -0,0 +1,43 @@ +/* arch/arm/plat-samsung/include/plat/usb-control.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - USB host port information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_USBCONTROL_H +#define __ASM_ARCH_USBCONTROL_H + +#define S3C_HCDFLG_USED (1) + +struct s3c2410_hcd_port { + unsigned char flags; + unsigned char power; + unsigned char oc_status; + unsigned char oc_changed; +}; + +struct s3c2410_hcd_info { + struct usb_hcd *hcd; + struct s3c2410_hcd_port port[2]; + + void (*power_control)(int port, int to); + void (*enable_oc)(struct s3c2410_hcd_info *, int on); + void (*report_oc)(struct s3c2410_hcd_info *, int ports); +}; + +static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) +{ + if (info->report_oc != NULL) { + (info->report_oc)(info, ports); + } +} + +extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info); + +#endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h new file mode 100644 index 00000000000..54b762acb5a --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -0,0 +1,49 @@ +/* arch/arm/plat-s3c/include/plat/watchdog-reset.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - System define for arch_reset() function + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <plat/regs-watchdog.h> +#include <mach/map.h> + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +static inline void arch_wdt_reset(void) +{ + struct clk *wdtclk; + + printk("arch_reset: attempting watchdog reset\n"); + + __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ + + wdtclk = clk_get(NULL, "watchdog"); + if (!IS_ERR(wdtclk)) { + clk_enable(wdtclk); + } else + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + + /* put initial values into count and data */ + __raw_writel(0x80, S3C2410_WTCNT); + __raw_writel(0x80, S3C2410_WTDAT); + + /* set the watchdog to go and reset... */ + __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | + S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); + + /* wait for reset to assert... */ + mdelay(500); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); +} diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c new file mode 100644 index 00000000000..6790edfaca6 --- /dev/null +++ b/arch/arm/plat-samsung/init.c @@ -0,0 +1,160 @@ +/* linux/arch/arm/plat-s3c/init.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series CPU initialisation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <mach/hardware.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> + +#include <plat/regs-serial.h> + +static struct cpu_table *cpu; + +static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, + struct cpu_table *tab, + unsigned int count) +{ + for (; count != 0; count--, tab++) { + if ((idcode & tab->idmask) == tab->idcode) + return tab; + } + + return NULL; +} + +void __init s3c_init_cpu(unsigned long idcode, + struct cpu_table *cputab, unsigned int cputab_size) +{ + cpu = s3c_lookup_cpu(idcode, cputab, cputab_size); + + if (cpu == NULL) { + printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode); + panic("Unknown S3C24XX CPU"); + } + + printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); + + if (cpu->map_io == NULL || cpu->init == NULL) { + printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); + panic("Unsupported Samsung CPU"); + } + + cpu->map_io(); +} + +/* s3c24xx_init_clocks + * + * Initialise the clock subsystem and associated information from the + * given master crystal value. + * + * xtal = 0 -> use default PLL crystal value (normally 12MHz) + * != 0 -> PLL crystal value in Hz +*/ + +void __init s3c24xx_init_clocks(int xtal) +{ + if (xtal == 0) + xtal = 12*1000*1000; + + if (cpu == NULL) + panic("s3c24xx_init_clocks: no cpu setup?\n"); + + if (cpu->init_clocks == NULL) + panic("s3c24xx_init_clocks: cpu has no clock init\n"); + else + (cpu->init_clocks)(xtal); +} + +/* uart management */ + +static int nr_uarts __initdata = 0; + +static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; + +/* s3c24xx_init_uartdevs + * + * copy the specified platform data and configuration into our central + * set of devices, before the data is thrown away after the init process. + * + * This also fills in the array passed to the serial driver for the + * early initialisation of the console. +*/ + +void __init s3c24xx_init_uartdevs(char *name, + struct s3c24xx_uart_resources *res, + struct s3c2410_uartcfg *cfg, int no) +{ + struct platform_device *platdev; + struct s3c2410_uartcfg *cfgptr = uart_cfgs; + struct s3c24xx_uart_resources *resp; + int uart; + + memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no); + + for (uart = 0; uart < no; uart++, cfg++, cfgptr++) { + platdev = s3c24xx_uart_src[cfgptr->hwport]; + + resp = res + cfgptr->hwport; + + s3c24xx_uart_devs[uart] = platdev; + + platdev->name = name; + platdev->resource = resp->resources; + platdev->num_resources = resp->nr_resources; + + platdev->dev.platform_data = cfgptr; + } + + nr_uarts = no; +} + +void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + if (cpu == NULL) + return; + + if (cpu->init_uarts == NULL) { + printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); + } else + (cpu->init_uarts)(cfg, no); +} + +static int __init s3c_arch_init(void) +{ + int ret; + + // do the correct init for cpu + + if (cpu == NULL) + panic("s3c_arch_init: NULL cpu\n"); + + ret = (cpu->init)(); + if (ret != 0) + return ret; + + ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts); + return ret; +} + +arch_initcall(s3c_arch_init); diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c new file mode 100644 index 00000000000..4f8c102674a --- /dev/null +++ b/arch/arm/plat-samsung/irq-uart.c @@ -0,0 +1,143 @@ +/* arch/arm/plat-samsung/irq-uart.c + * originally part of arch/arm/plat-s3c64xx/irq.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Samsung- UART Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/serial_core.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/map.h> +#include <plat/irq-uart.h> +#include <plat/regs-serial.h> +#include <plat/cpu.h> + +/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] + * are consecutive when looking up the interrupt in the demux routines. + */ + +static inline void __iomem *s3c_irq_uart_base(unsigned int irq) +{ + struct s3c_uart_irq *uirq = get_irq_chip_data(irq); + return uirq->regs; +} + +static inline unsigned int s3c_irq_uart_bit(unsigned int irq) +{ + return irq & 3; +} + +static void s3c_irq_uart_mask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_maskack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_uart_unmask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg &= ~(1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_ack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) +{ + struct s3c_uart_irq *uirq = desc->handler_data; + u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); + int base = uirq->base_irq; + + if (pend & (1 << 0)) + generic_handle_irq(base); + if (pend & (1 << 1)) + generic_handle_irq(base + 1); + if (pend & (1 << 2)) + generic_handle_irq(base + 2); + if (pend & (1 << 3)) + generic_handle_irq(base + 3); +} + +static struct irq_chip s3c_irq_uart = { + .name = "s3c-uart", + .mask = s3c_irq_uart_mask, + .unmask = s3c_irq_uart_unmask, + .mask_ack = s3c_irq_uart_maskack, + .ack = s3c_irq_uart_ack, +}; + +static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) +{ + struct irq_desc *desc = irq_to_desc(uirq->parent_irq); + void __iomem *reg_base = uirq->regs; + unsigned int irq; + int offs; + + /* mask all interrupts at the start. */ + __raw_writel(0xf, reg_base + S3C64XX_UINTM); + + for (offs = 0; offs < 3; offs++) { + irq = uirq->base_irq + offs; + + set_irq_chip(irq, &s3c_irq_uart); + set_irq_chip_data(irq, uirq); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + desc->handler_data = uirq; + set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); +} + +/** + * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing + * @irq: The interrupt data for registering + * @nr_irqs: The number of interrupt descriptions in @irq. + * + * Register the UART interrupts specified by @irq including the demuxing + * routines. This supports the S3C6400 and newer style of devices. + */ +void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs) +{ + for (; nr_irqs > 0; nr_irqs--, irq++) + s3c_init_uart_irq(irq); +} diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c new file mode 100644 index 00000000000..0270519fcab --- /dev/null +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -0,0 +1,86 @@ +/* arch/arm/plat-samsung/irq-vic-timer.c + * originally part of arch/arm/plat-s3c64xx/irq.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/map.h> +#include <plat/irq-vic-timer.h> +#include <plat/regs-timer.h> + +static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) +{ + generic_handle_irq((int)desc->handler_data); +} + +/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ + +static void s3c_irq_timer_mask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg &= ~(1 << (irq - IRQ_TIMER0)); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_unmask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg |= 1 << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_ack(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; + reg |= (1 << 5) << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static struct irq_chip s3c_irq_timer = { + .name = "s3c-timer", + .mask = s3c_irq_timer_mask, + .unmask = s3c_irq_timer_unmask, + .ack = s3c_irq_timer_ack, +}; + +/** + * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\ + * @parent_irq: The parent IRQ on the VIC for the timer. + * @timer_irq: The IRQ to be used for the timer. + * + * Register the necessary IRQ chaining and support for the timer IRQs + * chained of the VIC. + */ +void __init s3c_init_vic_timer_irq(unsigned int parent_irq, + unsigned int timer_irq) +{ + struct irq_desc *desc = irq_to_desc(parent_irq); + + set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer); + + set_irq_chip(timer_irq, &s3c_irq_timer); + set_irq_handler(timer_irq, handle_level_irq); + set_irq_flags(timer_irq, IRQF_VALID); + + desc->handler_data = (void *)timer_irq; +} diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c new file mode 100644 index 00000000000..0b5bb774192 --- /dev/null +++ b/arch/arm/plat-samsung/pm-check.c @@ -0,0 +1,242 @@ +/* linux/arch/arm/plat-s3c/pm-check.c + * originally in linux/arch/arm/plat-s3c24xx/pm.c + * + * Copyright (c) 2004-2008 Simtec Electronics + * http://armlinux.simtec.co.uk + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Power Mangament - suspend/resume memory corruptiuon check. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/init.h> +#include <linux/crc32.h> +#include <linux/ioport.h> + +#include <plat/pm.h> + +#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1 +#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value +#endif + +/* suspend checking code... + * + * this next area does a set of crc checks over all the installed + * memory, so the system can verify if the resume was ok. + * + * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * increasing it will mean that the area corrupted will be less easy to spot, + * and reducing the size will cause the CRC save area to grow +*/ + +#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024) + +static u32 crc_size; /* size needed for the crc block */ +static u32 *crcs; /* allocated over suspend/resume */ + +typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); + +/* s3c_pm_run_res + * + * go through the given resource list, and look for system ram +*/ + +static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) +{ + while (ptr != NULL) { + if (ptr->child != NULL) + s3c_pm_run_res(ptr->child, fn, arg); + + if ((ptr->flags & IORESOURCE_MEM) && + strcmp(ptr->name, "System RAM") == 0) { + S3C_PMDBG("Found system RAM at %08lx..%08lx\n", + (unsigned long)ptr->start, + (unsigned long)ptr->end); + arg = (fn)(ptr, arg); + } + + ptr = ptr->sibling; + } +} + +static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg) +{ + s3c_pm_run_res(&iomem_resource, fn, arg); +} + +static u32 *s3c_pm_countram(struct resource *res, u32 *val) +{ + u32 size = (u32)(res->end - res->start)+1; + + size += CHECK_CHUNKSIZE-1; + size /= CHECK_CHUNKSIZE; + + S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", + (unsigned long)res->start, (unsigned long)res->end, size); + + *val += size * sizeof(u32); + return val; +} + +/* s3c_pm_prepare_check + * + * prepare the necessary information for creating the CRCs. This + * must be done before the final save, as it will require memory + * allocating, and thus touching bits of the kernel we do not + * know about. +*/ + +void s3c_pm_check_prepare(void) +{ + crc_size = 0; + + s3c_pm_run_sysram(s3c_pm_countram, &crc_size); + + S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size); + + crcs = kmalloc(crc_size+4, GFP_KERNEL); + if (crcs == NULL) + printk(KERN_ERR "Cannot allocated CRC save area\n"); +} + +static u32 *s3c_pm_makecheck(struct resource *res, u32 *val) +{ + unsigned long addr, left; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + *val = crc32_le(~0, phys_to_virt(addr), left); + val++; + } + + return val; +} + +/* s3c_pm_check_store + * + * compute the CRC values for the memory blocks before the final + * sleep. +*/ + +void s3c_pm_check_store(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_makecheck, crcs); +} + +/* in_region + * + * return TRUE if the area defined by ptr..ptr+size contains the + * what..what+whatsz +*/ + +static inline int in_region(void *ptr, int size, void *what, size_t whatsz) +{ + if ((what+whatsz) < ptr) + return 0; + + if (what > (ptr+size)) + return 0; + + return 1; +} + +/** + * s3c_pm_runcheck() - helper to check a resource on restore. + * @res: The resource to check + * @vak: Pointer to list of CRC32 values to check. + * + * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this + * function runs the given memory resource checking it against the stored + * CRC to ensure that memory is restored. The function tries to skip as + * many of the areas used during the suspend process. + */ +static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) +{ + void *save_at = phys_to_virt(s3c_sleep_save_phys); + unsigned long addr; + unsigned long left; + void *stkpage; + void *ptr; + u32 calc; + + stkpage = (void *)((u32)&calc & ~PAGE_MASK); + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + ptr = phys_to_virt(addr); + + if (in_region(ptr, left, stkpage, 4096)) { + S3C_PMDBG("skipping %08lx, has stack in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, crcs, crc_size)) { + S3C_PMDBG("skipping %08lx, has crc block in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, save_at, 32*4 )) { + S3C_PMDBG("skipping %08lx, has save block in\n", addr); + goto skip_check; + } + + /* calculate and check the checksum */ + + calc = crc32_le(~0, ptr, left); + if (calc != *val) { + printk(KERN_ERR "Restore CRC error at " + "%08lx (%08x vs %08x)\n", addr, calc, *val); + + S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n", + addr, calc, *val); + } + + skip_check: + val++; + } + + return val; +} + +/** + * s3c_pm_check_restore() - memory check called on resume + * + * check the CRCs after the restore event and free the memory used + * to hold them +*/ +void s3c_pm_check_restore(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_runcheck, crcs); +} + +/** + * s3c_pm_check_cleanup() - free memory resources + * + * Free the resources that where allocated by the suspend + * memory check code. We do this separately from the + * s3c_pm_check_restore() function as we cannot call any + * functions that might sleep during that resume. + */ +void s3c_pm_check_cleanup(void) +{ + kfree(crcs); + crcs = NULL; +} + diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c new file mode 100644 index 00000000000..69a4c7f02e2 --- /dev/null +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -0,0 +1,380 @@ + +/* linux/arch/arm/plat-s3c/pm-gpio.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO PM code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/sysdev.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <plat/gpio-core.h> +#include <plat/pm.h> + +/* PM GPIO helpers */ + +#define OFFS_CON (0x00) +#define OFFS_DAT (0x04) +#define OFFS_UP (0x08) + +static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip) +{ + chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); + chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); +} + +static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip) +{ + void __iomem *base = chip->base; + u32 old_gpcon = __raw_readl(base + OFFS_CON); + u32 old_gpdat = __raw_readl(base + OFFS_DAT); + u32 gps_gpcon = chip->pm_save[0]; + u32 gps_gpdat = chip->pm_save[1]; + u32 gpcon; + + /* GPACON only has one bit per control / data and no PULLUPs. + * GPACON[x] = 0 => Output, 1 => SFN */ + + /* first set all SFN bits to SFN */ + + gpcon = old_gpcon | gps_gpcon; + __raw_writel(gpcon, base + OFFS_CON); + + /* now set all the other bits */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + + S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); +} + +struct s3c_gpio_pm s3c_gpio_pm_1bit = { + .save = s3c_gpio_pm_1bit_save, + .resume = s3c_gpio_pm_1bit_resume, +}; + +static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip) +{ + chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); + chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); + chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP); +} + +/* Test whether the given masked+shifted bits of an GPIO configuration + * are one of the SFN (special function) modes. */ + +static inline int is_sfn(unsigned long con) +{ + return con >= 2; +} + +/* Test if the given masked+shifted GPIO configuration is an input */ + +static inline int is_in(unsigned long con) +{ + return con == 0; +} + +/* Test if the given masked+shifted GPIO configuration is an output */ + +static inline int is_out(unsigned long con) +{ + return con == 1; +} + +/** + * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank + * @chip: The chip information to resume. + * + * Restore one of the GPIO banks that was saved during suspend. This is + * not as simple as once thought, due to the possibility of glitches + * from the order that the CON and DAT registers are set in. + * + * The three states the pin can be are {IN,OUT,SFN} which gives us 9 + * combinations of changes to check. Three of these, if the pin stays + * in the same configuration can be discounted. This leaves us with + * the following: + * + * { IN => OUT } Change DAT first + * { IN => SFN } Change CON first + * { OUT => SFN } Change CON first, so new data will not glitch + * { OUT => IN } Change CON first, so new data will not glitch + * { SFN => IN } Change CON first + * { SFN => OUT } Change DAT first, so new data will not glitch [1] + * + * We do not currently deal with the UP registers as these control + * weak resistors, so a small delay in change should not need to bring + * these into the calculations. + * + * [1] this assumes that writing to a pin DAT whilst in SFN will set the + * state for when it is next output. + */ +static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip) +{ + void __iomem *base = chip->base; + u32 old_gpcon = __raw_readl(base + OFFS_CON); + u32 old_gpdat = __raw_readl(base + OFFS_DAT); + u32 gps_gpcon = chip->pm_save[0]; + u32 gps_gpdat = chip->pm_save[1]; + u32 gpcon, old, new, mask; + u32 change_mask = 0x0; + int nr; + + /* restore GPIO pull-up settings */ + __raw_writel(chip->pm_save[2], base + OFFS_UP); + + /* Create a change_mask of all the items that need to have + * their CON value changed before their DAT value, so that + * we minimise the work between the two settings. + */ + + for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) { + old = (old_gpcon & mask) >> nr; + new = (gps_gpcon & mask) >> nr; + + /* If there is no change, then skip */ + + if (old == new) + continue; + + /* If both are special function, then skip */ + + if (is_sfn(old) && is_sfn(new)) + continue; + + /* Change is IN => OUT, do not change now */ + + if (is_in(old) && is_out(new)) + continue; + + /* Change is SFN => OUT, do not change now */ + + if (is_sfn(old) && is_out(new)) + continue; + + /* We should now be at the case of IN=>SFN, + * OUT=>SFN, OUT=>IN, SFN=>IN. */ + + change_mask |= mask; + } + + + /* Write the new CON settings */ + + gpcon = old_gpcon & ~change_mask; + gpcon |= gps_gpcon & change_mask; + + __raw_writel(gpcon, base + OFFS_CON); + + /* Now change any items that require DAT,CON */ + + __raw_writel(gps_gpdat, base + OFFS_DAT); + __raw_writel(gps_gpcon, base + OFFS_CON); + + S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); +} + +struct s3c_gpio_pm s3c_gpio_pm_2bit = { + .save = s3c_gpio_pm_2bit_save, + .resume = s3c_gpio_pm_2bit_resume, +}; + +#ifdef CONFIG_ARCH_S3C64XX +static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) +{ + chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); + chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT); + chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP); + + if (chip->chip.ngpio > 8) + chip->pm_save[0] = __raw_readl(chip->base - 4); +} + +static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) +{ + u32 old, new, mask; + u32 change_mask = 0x0; + int nr; + + for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) { + old = (old_gpcon & mask) >> nr; + new = (gps_gpcon & mask) >> nr; + + /* If there is no change, then skip */ + + if (old == new) + continue; + + /* If both are special function, then skip */ + + if (is_sfn(old) && is_sfn(new)) + continue; + + /* Change is IN => OUT, do not change now */ + + if (is_in(old) && is_out(new)) + continue; + + /* Change is SFN => OUT, do not change now */ + + if (is_sfn(old) && is_out(new)) + continue; + + /* We should now be at the case of IN=>SFN, + * OUT=>SFN, OUT=>IN, SFN=>IN. */ + + change_mask |= mask; + } + + return change_mask; +} + +static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index) +{ + void __iomem *con = chip->base + (index * 4); + u32 old_gpcon = __raw_readl(con); + u32 gps_gpcon = chip->pm_save[index + 1]; + u32 gpcon, mask; + + mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon); + + gpcon = old_gpcon & ~mask; + gpcon |= gps_gpcon & mask; + + __raw_writel(gpcon, con); +} + +static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) +{ + void __iomem *base = chip->base; + u32 old_gpcon[2]; + u32 old_gpdat = __raw_readl(base + OFFS_DAT); + u32 gps_gpdat = chip->pm_save[2]; + + /* First, modify the CON settings */ + + old_gpcon[0] = 0; + old_gpcon[1] = __raw_readl(base + OFFS_CON); + + s3c_gpio_pm_4bit_con(chip, 0); + if (chip->chip.ngpio > 8) { + old_gpcon[0] = __raw_readl(base - 4); + s3c_gpio_pm_4bit_con(chip, -1); + } + + /* Now change the configurations that require DAT,CON */ + + __raw_writel(chip->pm_save[2], base + OFFS_DAT); + __raw_writel(chip->pm_save[1], base + OFFS_CON); + if (chip->chip.ngpio > 8) + __raw_writel(chip->pm_save[0], base - 4); + + __raw_writel(chip->pm_save[2], base + OFFS_DAT); + __raw_writel(chip->pm_save[3], base + OFFS_UP); + + if (chip->chip.ngpio > 8) { + S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon[0], old_gpcon[1], + __raw_readl(base - 4), + __raw_readl(base + OFFS_CON), + old_gpdat, gps_gpdat); + } else + S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n", + chip->chip.label, old_gpcon[1], + __raw_readl(base + OFFS_CON), + old_gpdat, gps_gpdat); +} + +struct s3c_gpio_pm s3c_gpio_pm_4bit = { + .save = s3c_gpio_pm_4bit_save, + .resume = s3c_gpio_pm_4bit_resume, +}; +#endif /* CONFIG_ARCH_S3C64XX */ + +/** + * s3c_pm_save_gpio() - save gpio chip data for suspend + * @ourchip: The chip for suspend. + */ +static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip) +{ + struct s3c_gpio_pm *pm = ourchip->pm; + + if (pm == NULL || pm->save == NULL) + S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); + else + pm->save(ourchip); +} + +/** + * s3c_pm_save_gpios() - Save the state of the GPIO banks. + * + * For all the GPIO banks, save the state of each one ready for going + * into a suspend mode. + */ +void s3c_pm_save_gpios(void) +{ + struct s3c_gpio_chip *ourchip; + unsigned int gpio_nr; + + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + ourchip = s3c_gpiolib_getchip(gpio_nr); + if (!ourchip) + continue; + + s3c_pm_save_gpio(ourchip); + + S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n", + ourchip->chip.label, + ourchip->pm_save[0], + ourchip->pm_save[1], + ourchip->pm_save[2], + ourchip->pm_save[3]); + + gpio_nr += ourchip->chip.ngpio; + gpio_nr += CONFIG_S3C_GPIO_SPACE; + } +} + +/** + * s3c_pm_resume_gpio() - restore gpio chip data after suspend + * @ourchip: The suspended chip. + */ +static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip) +{ + struct s3c_gpio_pm *pm = ourchip->pm; + + if (pm == NULL || pm->resume == NULL) + S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); + else + pm->resume(ourchip); +} + +void s3c_pm_restore_gpios(void) +{ + struct s3c_gpio_chip *ourchip; + unsigned int gpio_nr; + + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + ourchip = s3c_gpiolib_getchip(gpio_nr); + if (!ourchip) + continue; + + s3c_pm_resume_gpio(ourchip); + + gpio_nr += ourchip->chip.ngpio; + gpio_nr += CONFIG_S3C_GPIO_SPACE; + } +} diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c new file mode 100644 index 00000000000..27cfca59769 --- /dev/null +++ b/arch/arm/plat-samsung/pm.c @@ -0,0 +1,378 @@ +/* linux/arch/arm/plat-s3c/pm.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2004-2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C common power management (suspend to ram) support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/regs-serial.h> +#include <mach/regs-clock.h> +#include <mach/regs-irq.h> +#include <asm/irq.h> + +#include <plat/pm.h> +#include <mach/pm-core.h> + +/* for external use */ + +unsigned long s3c_pm_flags; + +/* Debug code: + * + * This code supports debug output to the low level UARTs for use on + * resume before the console layer is available. +*/ + +#ifdef CONFIG_SAMSUNG_PM_DEBUG +extern void printascii(const char *); + +void s3c_pm_dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} + +static inline void s3c_pm_debug_init(void) +{ + /* restart uart clocks so we can use them to output */ + s3c_pm_debug_init_uart(); +} + +#else +#define s3c_pm_debug_init() do { } while(0) + +#endif /* CONFIG_SAMSUNG_PM_DEBUG */ + +/* Save the UART configurations if we are configured for debug. */ + +unsigned char pm_uart_udivslot; + +#ifdef CONFIG_SAMSUNG_PM_DEBUG + +struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; + +static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + save->ulcon = __raw_readl(regs + S3C2410_ULCON); + save->ucon = __raw_readl(regs + S3C2410_UCON); + save->ufcon = __raw_readl(regs + S3C2410_UFCON); + save->umcon = __raw_readl(regs + S3C2410_UMCON); + save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV); + + if (pm_uart_udivslot) + save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT); + + S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n", + uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv); +} + +static void s3c_pm_save_uarts(void) +{ + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_save_uart(uart, save); +} + +static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + s3c_pm_arch_update_uart(regs, save); + + __raw_writel(save->ulcon, regs + S3C2410_ULCON); + __raw_writel(save->ucon, regs + S3C2410_UCON); + __raw_writel(save->ufcon, regs + S3C2410_UFCON); + __raw_writel(save->umcon, regs + S3C2410_UMCON); + __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV); + + if (pm_uart_udivslot) + __raw_writel(save->udivslot, regs + S3C2443_DIVSLOT); +} + +static void s3c_pm_restore_uarts(void) +{ + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_restore_uart(uart, save); +} +#else +static void s3c_pm_save_uarts(void) { } +static void s3c_pm_restore_uarts(void) { } +#endif + +/* The IRQ ext-int code goes here, it is too small to currently bother + * with its own file. */ + +unsigned long s3c_irqwake_intmask = 0xffffffffL; +unsigned long s3c_irqwake_eintmask = 0xffffffffL; + +int s3c_irqext_wake(unsigned int irqno, unsigned int state) +{ + unsigned long bit = 1L << IRQ_EINT_BIT(irqno); + + if (!(s3c_irqwake_eintallow & bit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_eintmask |= bit; + else + s3c_irqwake_eintmask &= ~bit; + + return 0; +} + +/* helper functions to save and restore register state */ + +/** + * s3c_pm_do_save() - save a set of registers for restoration on resume. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Run through the list of registers given, saving their contents in the + * array for later restoration when we wakeup. + */ +void s3c_pm_do_save(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + ptr->val = __raw_readl(ptr->reg); + S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val); + } +} + +/** + * s3c_pm_do_restore() - restore register values from the save list. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Restore the register values saved from s3c_pm_do_save(). + * + * Note, we do not use S3C_PMDBG() in here, as the system may not have + * restore the UARTs state yet +*/ + +void s3c_pm_do_restore(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", + ptr->reg, ptr->val, __raw_readl(ptr->reg)); + + __raw_writel(ptr->val, ptr->reg); + } +} + +/** + * s3c_pm_do_restore_core() - early restore register values from save list. + * + * This is similar to s3c_pm_do_restore() except we try and minimise the + * side effects of the function in case registers that hardware might need + * to work has been restored. + * + * WARNING: Do not put any debug in here that may effect memory or use + * peripherals, as things may be changing! +*/ + +void s3c_pm_do_restore_core(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) + __raw_writel(ptr->val, ptr->reg); +} + +/* s3c2410_pm_show_resume_irqs + * + * print any IRQs asserted at resume time (ie, we woke from) +*/ +static void s3c_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask) +{ + int i; + + which &= ~mask; + + for (i = 0; i <= 31; i++) { + if (which & (1L<<i)) { + S3C_PMDBG("IRQ %d asserted at resume\n", start+i); + } + } +} + + +void (*pm_cpu_prep)(void); +void (*pm_cpu_sleep)(void); + +#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) + +/* s3c_pm_enter + * + * central control for sleep/resume process +*/ + +static int s3c_pm_enter(suspend_state_t state) +{ + static unsigned long regs_save[16]; + + /* ensure the debug is initialised (if enabled) */ + + s3c_pm_debug_init(); + + S3C_PMDBG("%s(%d)\n", __func__, state); + + if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { + printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__); + return -EINVAL; + } + + /* check if we have anything to wake-up with... bad things seem + * to happen if you suspend with no wakeup (system will often + * require a full power-cycle) + */ + + if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && + !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { + printk(KERN_ERR "%s: No wake-up sources!\n", __func__); + printk(KERN_ERR "%s: Aborting sleep\n", __func__); + return -EINVAL; + } + + /* store the physical address of the register recovery block */ + + s3c_sleep_save_phys = virt_to_phys(regs_save); + + S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys); + + /* save all necessary core registers not covered by the drivers */ + + s3c_pm_save_gpios(); + s3c_pm_save_uarts(); + s3c_pm_save_core(); + + /* set the irq configuration for wake */ + + s3c_pm_configure_extint(); + + S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n", + s3c_irqwake_intmask, s3c_irqwake_eintmask); + + s3c_pm_arch_prepare_irqs(); + + /* call cpu specific preparation */ + + pm_cpu_prep(); + + /* flush cache back to ram */ + + flush_cache_all(); + + s3c_pm_check_store(); + + /* send the cpu to sleep... */ + + s3c_pm_arch_stop_clocks(); + + /* s3c_cpu_save will also act as our return point from when + * we resume as it saves its own register state and restores it + * during the resume. */ + + s3c_cpu_save(regs_save); + + /* restore the cpu state using the kernel's cpu init code. */ + + cpu_init(); + + /* restore the system state */ + + s3c_pm_restore_core(); + s3c_pm_restore_uarts(); + s3c_pm_restore_gpios(); + + s3c_pm_debug_init(); + + /* check what irq (if any) restored the system */ + + s3c_pm_arch_show_resume_irqs(); + + S3C_PMDBG("%s: post sleep, preparing to return\n", __func__); + + /* LEDs should now be 1110 */ + s3c_pm_debug_smdkled(1 << 1, 0); + + s3c_pm_check_restore(); + + /* ok, let's return from sleep */ + + S3C_PMDBG("S3C PM Resume (post-restore)\n"); + return 0; +} + +/* callback from assembly code */ +void s3c_pm_cb_flushcache(void) +{ + flush_cache_all(); +} + +static int s3c_pm_prepare(void) +{ + /* prepare check area if configured */ + + s3c_pm_check_prepare(); + return 0; +} + +static void s3c_pm_finish(void) +{ + s3c_pm_check_cleanup(); +} + +static struct platform_suspend_ops s3c_pm_ops = { + .enter = s3c_pm_enter, + .prepare = s3c_pm_prepare, + .finish = s3c_pm_finish, + .valid = suspend_valid_only_mem, +}; + +/* s3c_pm_init + * + * Attach the power management functions. This should be called + * from the board specific initialisation if the board supports + * it. +*/ + +int __init s3c_pm_init(void) +{ + printk("S3C Power Management, Copyright 2004 Simtec Electronics\n"); + + suspend_set_ops(&s3c_pm_ops); + return 0; +} diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c new file mode 100644 index 00000000000..46c9381e083 --- /dev/null +++ b/arch/arm/plat-samsung/pwm-clock.c @@ -0,0 +1,455 @@ +/* linux/arch/arm/plat-s3c24xx/pwm-clock.c + * + * Copyright (c) 2007 Simtec Electronics + * Copyright (c) 2007, 2008 Ben Dooks + * Ben Dooks <ben-linux@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/log2.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <asm/irq.h> + +#include <plat/clock.h> +#include <plat/cpu.h> + +#include <plat/regs-timer.h> +#include <mach/pwm-clock.h> + +/* Each of the timers 0 through 5 go through the following + * clock tree, with the inputs depending on the timers. + * + * pclk ---- [ prescaler 0 ] -+---> timer 0 + * +---> timer 1 + * + * pclk ---- [ prescaler 1 ] -+---> timer 2 + * +---> timer 3 + * \---> timer 4 + * + * Which are fed into the timers as so: + * + * prescaled 0 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 0 + * tclk 0 ------------------------------/ + * + * prescaled 0 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 1 + * tclk 0 ------------------------------/ + * + * + * prescaled 1 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 2 + * tclk 1 ------------------------------/ + * + * prescaled 1 ---- [ div 2,4,8,16 ] ---\ + * [mux] -> timer 3 + * tclk 1 ------------------------------/ + * + * prescaled 1 ---- [ div 2,4,8, 16 ] --\ + * [mux] -> timer 4 + * tclk 1 ------------------------------/ + * + * Since the mux and the divider are tied together in the + * same register space, it is impossible to set the parent + * and the rate at the same time. To avoid this, we add an + * intermediate 'prescaled-and-divided' clock to select + * as the parent for the timer input clock called tdiv. + * + * prescaled clk --> pwm-tdiv ---\ + * [ mux ] --> timer X + * tclk -------------------------/ +*/ + +static struct clk clk_timer_scaler[]; + +static unsigned long clk_pwm_scaler_get_rate(struct clk *clk) +{ + unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0); + + if (clk == &clk_timer_scaler[1]) { + tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK; + tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT; + } else { + tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK; + } + + return clk_get_rate(clk->parent) / (tcfg0 + 1); +} + +static unsigned long clk_pwm_scaler_round_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long divisor = parent_rate / rate; + + if (divisor > 256) + divisor = 256; + else if (divisor < 2) + divisor = 2; + + return parent_rate / divisor; +} + +static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long round = clk_pwm_scaler_round_rate(clk, rate); + unsigned long tcfg0; + unsigned long divisor; + unsigned long flags; + + divisor = clk_get_rate(clk->parent) / round; + divisor--; + + local_irq_save(flags); + tcfg0 = __raw_readl(S3C2410_TCFG0); + + if (clk == &clk_timer_scaler[1]) { + tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; + tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT; + } else { + tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK; + tcfg0 |= divisor; + } + + __raw_writel(tcfg0, S3C2410_TCFG0); + local_irq_restore(flags); + + return 0; +} + +static struct clk_ops clk_pwm_scaler_ops = { + .get_rate = clk_pwm_scaler_get_rate, + .set_rate = clk_pwm_scaler_set_rate, + .round_rate = clk_pwm_scaler_round_rate, +}; + +static struct clk clk_timer_scaler[] = { + [0] = { + .name = "pwm-scaler0", + .id = -1, + .ops = &clk_pwm_scaler_ops, + }, + [1] = { + .name = "pwm-scaler1", + .id = -1, + .ops = &clk_pwm_scaler_ops, + }, +}; + +static struct clk clk_timer_tclk[] = { + [0] = { + .name = "pwm-tclk0", + .id = -1, + }, + [1] = { + .name = "pwm-tclk1", + .id = -1, + }, +}; + +struct pwm_tdiv_clk { + struct clk clk; + unsigned int divisor; +}; + +static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk) +{ + return container_of(clk, struct pwm_tdiv_clk, clk); +} + +static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk) +{ + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned int divisor; + + tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + if (pwm_cfg_src_is_tclk(tcfg1)) + divisor = to_tdiv(clk)->divisor; + else + divisor = tcfg_to_divisor(tcfg1); + + return clk_get_rate(clk->parent) / divisor; +} + +static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate; + unsigned long divisor; + + parent_rate = clk_get_rate(clk->parent); + divisor = parent_rate / rate; + + if (divisor <= 1 && pwm_tdiv_has_div1()) + divisor = 1; + else if (divisor <= 2) + divisor = 2; + else if (divisor <= 4) + divisor = 4; + else if (divisor <= 8) + divisor = 8; + else + divisor = 16; + + return parent_rate / divisor; +} + +static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk) +{ + return pwm_tdiv_div_bits(divclk->divisor); +} + +static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk) +{ + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned long bits = clk_pwm_tdiv_bits(divclk); + unsigned long flags; + unsigned long shift = S3C2410_TCFG1_SHIFT(divclk->clk.id); + + local_irq_save(flags); + + tcfg1 = __raw_readl(S3C2410_TCFG1); + tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); + tcfg1 |= bits << shift; + __raw_writel(tcfg1, S3C2410_TCFG1); + + local_irq_restore(flags); +} + +static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate) +{ + struct pwm_tdiv_clk *divclk = to_tdiv(clk); + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long divisor; + + tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + rate = clk_round_rate(clk, rate); + divisor = parent_rate / rate; + + if (divisor > 16) + return -EINVAL; + + divclk->divisor = divisor; + + /* Update the current MUX settings if we are currently + * selected as the clock source for this clock. */ + + if (!pwm_cfg_src_is_tclk(tcfg1)) + clk_pwm_tdiv_update(divclk); + + return 0; +} + +static struct clk_ops clk_tdiv_ops = { + .get_rate = clk_pwm_tdiv_get_rate, + .set_rate = clk_pwm_tdiv_set_rate, + .round_rate = clk_pwm_tdiv_round_rate, +}; + +static struct pwm_tdiv_clk clk_timer_tdiv[] = { + [0] = { + .clk = { + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[0], + }, + }, + [1] = { + .clk = { + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[0], + } + }, + [2] = { + .clk = { + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[1], + }, + }, + [3] = { + .clk = { + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[1], + }, + }, + [4] = { + .clk = { + .name = "pwm-tdiv", + .ops = &clk_tdiv_ops, + .parent = &clk_timer_scaler[1], + }, + }, +}; + +static int __init clk_pwm_tdiv_register(unsigned int id) +{ + struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id]; + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + + tcfg1 >>= S3C2410_TCFG1_SHIFT(id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + divclk->clk.id = id; + divclk->divisor = tcfg_to_divisor(tcfg1); + + return s3c24xx_register_clock(&divclk->clk); +} + +static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id) +{ + return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0]; +} + +static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id) +{ + return &clk_timer_tdiv[id].clk; +} + +static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned int id = clk->id; + unsigned long tcfg1; + unsigned long flags; + unsigned long bits; + unsigned long shift = S3C2410_TCFG1_SHIFT(id); + + if (parent == s3c24xx_pwmclk_tclk(id)) + bits = S3C_TCFG1_MUX_TCLK << shift; + else if (parent == s3c24xx_pwmclk_tdiv(id)) + bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift; + else + return -EINVAL; + + clk->parent = parent; + + local_irq_save(flags); + + tcfg1 = __raw_readl(S3C2410_TCFG1); + tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); + __raw_writel(tcfg1 | bits, S3C2410_TCFG1); + + local_irq_restore(flags); + + return 0; +} + +static struct clk_ops clk_tin_ops = { + .set_parent = clk_pwm_tin_set_parent, +}; + +static struct clk clk_tin[] = { + [0] = { + .name = "pwm-tin", + .id = 0, + .ops = &clk_tin_ops, + }, + [1] = { + .name = "pwm-tin", + .id = 1, + .ops = &clk_tin_ops, + }, + [2] = { + .name = "pwm-tin", + .id = 2, + .ops = &clk_tin_ops, + }, + [3] = { + .name = "pwm-tin", + .id = 3, + .ops = &clk_tin_ops, + }, + [4] = { + .name = "pwm-tin", + .id = 4, + .ops = &clk_tin_ops, + }, +}; + +static __init int clk_pwm_tin_register(struct clk *pwm) +{ + unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); + unsigned int id = pwm->id; + + struct clk *parent; + int ret; + + ret = s3c24xx_register_clock(pwm); + if (ret < 0) + return ret; + + tcfg1 >>= S3C2410_TCFG1_SHIFT(id); + tcfg1 &= S3C2410_TCFG1_MUX_MASK; + + if (pwm_cfg_src_is_tclk(tcfg1)) + parent = s3c24xx_pwmclk_tclk(id); + else + parent = s3c24xx_pwmclk_tdiv(id); + + return clk_set_parent(pwm, parent); +} + +/** + * s3c_pwmclk_init() - initialise pwm clocks + * + * Initialise and register the clocks which provide the inputs for the + * pwm timer blocks. + * + * Note, this call is required by the time core, so must be called after + * the base clocks are added and before any of the initcalls are run. + */ +__init void s3c_pwmclk_init(void) +{ + struct clk *clk_timers; + unsigned int clk; + int ret; + + clk_timers = clk_get(NULL, "timers"); + if (IS_ERR(clk_timers)) { + printk(KERN_ERR "%s: no parent clock\n", __func__); + return; + } + + for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) + clk_timer_scaler[clk].parent = clk_timers; + + s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler)); + s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk)); + + for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) { + ret = clk_pwm_tdiv_register(clk); + + if (ret < 0) { + printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk); + return; + } + } + + for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) { + ret = clk_pwm_tin_register(&clk_tin[clk]); + if (ret < 0) { + printk(KERN_ERR "error adding pwm%d tin clock\n", clk); + return; + } + } +} diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c new file mode 100644 index 00000000000..f2d11390d01 --- /dev/null +++ b/arch/arm/plat-samsung/pwm.c @@ -0,0 +1,445 @@ +/* arch/arm/plat-s3c/pwm.c + * + * Copyright (c) 2007 Ben Dooks + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> + * + * S3C series PWM device core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pwm.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> +#include <plat/regs-timer.h> + +struct pwm_device { + struct list_head list; + struct platform_device *pdev; + + struct clk *clk_div; + struct clk *clk; + const char *label; + + unsigned int period_ns; + unsigned int duty_ns; + + unsigned char tcon_base; + unsigned char running; + unsigned char use_count; + unsigned char pwm_id; +}; + +#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg) + +static struct clk *clk_scaler[2]; + +/* Standard setup for a timer block. */ + +#define TIMER_RESOURCE_SIZE (1) + +#define TIMER_RESOURCE(_tmr, _irq) \ + (struct resource [TIMER_RESOURCE_SIZE]) { \ + [0] = { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + } \ + } + +#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ + .name = "s3c24xx-pwm", \ + .id = _tmr_no, \ + .num_resources = TIMER_RESOURCE_SIZE, \ + .resource = TIMER_RESOURCE(_tmr_no, _irq), \ + +/* since we already have an static mapping for the timer, we do not + * bother setting any IO resource for the base. + */ + +struct platform_device s3c_device_timer[] = { + [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, + [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, + [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, + [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, + [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, +}; + +static inline int pwm_is_tdiv(struct pwm_device *pwm) +{ + return clk_get_parent(pwm->clk) == pwm->clk_div; +} + +static DEFINE_MUTEX(pwm_lock); +static LIST_HEAD(pwm_list); + +struct pwm_device *pwm_request(int pwm_id, const char *label) +{ + struct pwm_device *pwm; + int found = 0; + + mutex_lock(&pwm_lock); + + list_for_each_entry(pwm, &pwm_list, list) { + if (pwm->pwm_id == pwm_id) { + found = 1; + break; + } + } + + if (found) { + if (pwm->use_count == 0) { + pwm->use_count = 1; + pwm->label = label; + } else + pwm = ERR_PTR(-EBUSY); + } else + pwm = ERR_PTR(-ENOENT); + + mutex_unlock(&pwm_lock); + return pwm; +} + +EXPORT_SYMBOL(pwm_request); + + +void pwm_free(struct pwm_device *pwm) +{ + mutex_lock(&pwm_lock); + + if (pwm->use_count) { + pwm->use_count--; + pwm->label = NULL; + } else + printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id); + + mutex_unlock(&pwm_lock); +} + +EXPORT_SYMBOL(pwm_free); + +#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0)) +#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2)) +#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3)) +#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1)) + +int pwm_enable(struct pwm_device *pwm) +{ + unsigned long flags; + unsigned long tcon; + + local_irq_save(flags); + + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_start(pwm); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + pwm->running = 1; + return 0; +} + +EXPORT_SYMBOL(pwm_enable); + +void pwm_disable(struct pwm_device *pwm) +{ + unsigned long flags; + unsigned long tcon; + + local_irq_save(flags); + + tcon = __raw_readl(S3C2410_TCON); + tcon &= ~pwm_tcon_start(pwm); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + pwm->running = 0; +} + +EXPORT_SYMBOL(pwm_disable); + +static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq) +{ + unsigned long tin_parent_rate; + unsigned int div; + + tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div)); + pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate); + + for (div = 2; div <= 16; div *= 2) { + if ((tin_parent_rate / (div << 16)) < freq) + return tin_parent_rate / div; + } + + return tin_parent_rate / 16; +} + +#define NS_IN_HZ (1000000000UL) + +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + unsigned long tin_rate; + unsigned long tin_ns; + unsigned long period; + unsigned long flags; + unsigned long tcon; + unsigned long tcnt; + long tcmp; + + /* We currently avoid using 64bit arithmetic by using the + * fact that anything faster than 1Hz is easily representable + * by 32bits. */ + + if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ) + return -ERANGE; + + if (duty_ns > period_ns) + return -EINVAL; + + if (period_ns == pwm->period_ns && + duty_ns == pwm->duty_ns) + return 0; + + /* The TCMP and TCNT can be read without a lock, they're not + * shared between the timers. */ + + tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id)); + tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id)); + + period = NS_IN_HZ / period_ns; + + pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n", + duty_ns, period_ns, period); + + /* Check to see if we are changing the clock rate of the PWM */ + + if (pwm->period_ns != period_ns) { + if (pwm_is_tdiv(pwm)) { + tin_rate = pwm_calc_tin(pwm, period); + clk_set_rate(pwm->clk_div, tin_rate); + } else + tin_rate = clk_get_rate(pwm->clk); + + pwm->period_ns = period_ns; + + pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate); + + tin_ns = NS_IN_HZ / tin_rate; + tcnt = period_ns / tin_ns; + } else + tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk); + + /* Note, counters count down */ + + tcmp = duty_ns / tin_ns; + tcmp = tcnt - tcmp; + /* the pwm hw only checks the compare register after a decrement, + so the pin never toggles if tcmp = tcnt */ + if (tcmp == tcnt) + tcmp--; + + pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt); + + if (tcmp < 0) + tcmp = 0; + + /* Update the PWM register block. */ + + local_irq_save(flags); + + __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id)); + __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id)); + + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_manulupdate(pwm); + tcon |= pwm_tcon_autoreload(pwm); + __raw_writel(tcon, S3C2410_TCON); + + tcon &= ~pwm_tcon_manulupdate(pwm); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + return 0; +} + +EXPORT_SYMBOL(pwm_config); + +static int pwm_register(struct pwm_device *pwm) +{ + pwm->duty_ns = -1; + pwm->period_ns = -1; + + mutex_lock(&pwm_lock); + list_add_tail(&pwm->list, &pwm_list); + mutex_unlock(&pwm_lock); + + return 0; +} + +static int s3c_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pwm_device *pwm; + unsigned long flags; + unsigned long tcon; + unsigned int id = pdev->id; + int ret; + + if (id == 4) { + dev_err(dev, "TIMER4 is currently not supported\n"); + return -ENXIO; + } + + pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); + if (pwm == NULL) { + dev_err(dev, "failed to allocate pwm_device\n"); + return -ENOMEM; + } + + pwm->pdev = pdev; + pwm->pwm_id = id; + + /* calculate base of control bits in TCON */ + pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4; + + pwm->clk = clk_get(dev, "pwm-tin"); + if (IS_ERR(pwm->clk)) { + dev_err(dev, "failed to get pwm tin clk\n"); + ret = PTR_ERR(pwm->clk); + goto err_alloc; + } + + pwm->clk_div = clk_get(dev, "pwm-tdiv"); + if (IS_ERR(pwm->clk_div)) { + dev_err(dev, "failed to get pwm tdiv clk\n"); + ret = PTR_ERR(pwm->clk_div); + goto err_clk_tin; + } + + local_irq_save(flags); + + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_invert(pwm); + __raw_writel(tcon, S3C2410_TCON); + + local_irq_restore(flags); + + + ret = pwm_register(pwm); + if (ret) { + dev_err(dev, "failed to register pwm\n"); + goto err_clk_tdiv; + } + + pwm_dbg(pwm, "config bits %02x\n", + (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f); + + dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n", + clk_get_rate(pwm->clk), + clk_get_rate(pwm->clk_div), + pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base); + + platform_set_drvdata(pdev, pwm); + return 0; + + err_clk_tdiv: + clk_put(pwm->clk_div); + + err_clk_tin: + clk_put(pwm->clk); + + err_alloc: + kfree(pwm); + return ret; +} + +static int __devexit s3c_pwm_remove(struct platform_device *pdev) +{ + struct pwm_device *pwm = platform_get_drvdata(pdev); + + clk_put(pwm->clk_div); + clk_put(pwm->clk); + kfree(pwm); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct pwm_device *pwm = platform_get_drvdata(pdev); + + /* No one preserve these values during suspend so reset them + * Otherwise driver leaves PWM unconfigured if same values + * passed to pwm_config + */ + pwm->period_ns = 0; + pwm->duty_ns = 0; + + return 0; +} + +static int s3c_pwm_resume(struct platform_device *pdev) +{ + struct pwm_device *pwm = platform_get_drvdata(pdev); + unsigned long tcon; + + /* Restore invertion */ + tcon = __raw_readl(S3C2410_TCON); + tcon |= pwm_tcon_invert(pwm); + __raw_writel(tcon, S3C2410_TCON); + + return 0; +} + +#else +#define s3c_pwm_suspend NULL +#define s3c_pwm_resume NULL +#endif + +static struct platform_driver s3c_pwm_driver = { + .driver = { + .name = "s3c24xx-pwm", + .owner = THIS_MODULE, + }, + .probe = s3c_pwm_probe, + .remove = __devexit_p(s3c_pwm_remove), + .suspend = s3c_pwm_suspend, + .resume = s3c_pwm_resume, +}; + +static int __init pwm_init(void) +{ + int ret; + + clk_scaler[0] = clk_get(NULL, "pwm-scaler0"); + clk_scaler[1] = clk_get(NULL, "pwm-scaler1"); + + if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) { + printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__); + return -EINVAL; + } + + ret = platform_driver_register(&s3c_pwm_driver); + if (ret) + printk(KERN_ERR "%s: failed to add pwm driver\n", __func__); + + return ret; +} + +arch_initcall(pwm_init); diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c new file mode 100644 index 00000000000..2231d80ad81 --- /dev/null +++ b/arch/arm/plat-samsung/time.c @@ -0,0 +1,285 @@ +/* linux/arch/arm/plat-samsung/time.c + * + * Copyright (C) 2003-2005 Simtec Electronics + * Ben Dooks, <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#include <asm/system.h> +#include <asm/leds.h> +#include <asm/mach-types.h> + +#include <asm/irq.h> +#include <mach/map.h> +#include <plat/regs-timer.h> +#include <mach/regs-irq.h> +#include <asm/mach/time.h> +#include <mach/tick.h> + +#include <plat/clock.h> +#include <plat/cpu.h> + +static unsigned long timer_startval; +static unsigned long timer_usec_ticks; + +#ifndef TICK_MAX +#define TICK_MAX (0xffff) +#endif + +#define TIMER_USEC_SHIFT 16 + +/* we use the shifted arithmetic to work out the ratio of timer ticks + * to usecs, as often the peripheral clock is not a nice even multiple + * of 1MHz. + * + * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok + * for the current HZ value of 200 without producing overflows. + * + * Original patch by Dimitry Andric, updated by Ben Dooks +*/ + + +/* timer_mask_usec_ticks + * + * given a clock and divisor, make the value to pass into timer_ticks_to_usec + * to scale the ticks into usecs +*/ + +static inline unsigned long +timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk) +{ + unsigned long den = pclk / 1000; + + return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den; +} + +/* timer_ticks_to_usec + * + * convert timer ticks to usec. +*/ + +static inline unsigned long timer_ticks_to_usec(unsigned long ticks) +{ + unsigned long res; + + res = ticks * timer_usec_ticks; + res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */ + + return res >> TIMER_USEC_SHIFT; +} + +/*** + * Returns microsecond since last clock interrupt. Note that interrupts + * will have been disabled by do_gettimeoffset() + * IRQs are disabled before entering here from do_gettimeofday() + */ + +static unsigned long s3c2410_gettimeoffset (void) +{ + unsigned long tdone; + unsigned long tval; + + /* work out how many ticks have gone since last timer interrupt */ + + tval = __raw_readl(S3C2410_TCNTO(4)); + tdone = timer_startval - tval; + + /* check to see if there is an interrupt pending */ + + if (s3c24xx_ostimer_pending()) { + /* re-read the timer, and try and fix up for the missed + * interrupt. Note, the interrupt may go off before the + * timer has re-loaded from wrapping. + */ + + tval = __raw_readl(S3C2410_TCNTO(4)); + tdone = timer_startval - tval; + + if (tval != 0) + tdone += timer_startval; + } + + return timer_ticks_to_usec(tdone); +} + + +/* + * IRQ handler for the timer + */ +static irqreturn_t +s3c2410_timer_interrupt(int irq, void *dev_id) +{ + timer_tick(); + return IRQ_HANDLED; +} + +static struct irqaction s3c2410_timer_irq = { + .name = "S3C2410 Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = s3c2410_timer_interrupt, +}; + +#define use_tclk1_12() ( \ + machine_is_bast() || \ + machine_is_vr1000() || \ + machine_is_anubis() || \ + machine_is_osiris()) + +static struct clk *tin; +static struct clk *tdiv; +static struct clk *timerclk; + +/* + * Set up timer interrupt, and return the current time in seconds. + * + * Currently we only use timer4, as it is the only timer which has no + * other function that can be exploited externally + */ +static void s3c2410_timer_setup (void) +{ + unsigned long tcon; + unsigned long tcnt; + unsigned long tcfg1; + unsigned long tcfg0; + + tcnt = TICK_MAX; /* default value for tcnt */ + + /* configure the system for whichever machine is in use */ + + if (use_tclk1_12()) { + /* timer is at 12MHz, scaler is 1 */ + timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); + tcnt = 12000000 / HZ; + + tcfg1 = __raw_readl(S3C2410_TCFG1); + tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; + tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; + __raw_writel(tcfg1, S3C2410_TCFG1); + } else { + unsigned long pclk; + struct clk *tscaler; + + /* for the h1940 (and others), we use the pclk from the core + * to generate the timer values. since values around 50 to + * 70MHz are not values we can directly generate the timer + * value from, we need to pre-scale and divide before using it. + * + * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz + * (8.45 ticks per usec) + */ + + pclk = clk_get_rate(timerclk); + + /* configure clock tick */ + + timer_usec_ticks = timer_mask_usec_ticks(6, pclk); + + tscaler = clk_get_parent(tdiv); + + clk_set_rate(tscaler, pclk / 3); + clk_set_rate(tdiv, pclk / 6); + clk_set_parent(tin, tdiv); + + tcnt = clk_get_rate(tin) / HZ; + } + + tcon = __raw_readl(S3C2410_TCON); + tcfg0 = __raw_readl(S3C2410_TCFG0); + tcfg1 = __raw_readl(S3C2410_TCFG1); + + /* timers reload after counting zero, so reduce the count by 1 */ + + tcnt--; + + printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n", + tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks); + + /* check to see if timer is within 16bit range... */ + if (tcnt > TICK_MAX) { + panic("setup_timer: HZ is too small, cannot configure timer!"); + return; + } + + __raw_writel(tcfg1, S3C2410_TCFG1); + __raw_writel(tcfg0, S3C2410_TCFG0); + + timer_startval = tcnt; + __raw_writel(tcnt, S3C2410_TCNTB(4)); + + /* ensure timer is stopped... */ + + tcon &= ~(7<<20); + tcon |= S3C2410_TCON_T4RELOAD; + tcon |= S3C2410_TCON_T4MANUALUPD; + + __raw_writel(tcon, S3C2410_TCON); + __raw_writel(tcnt, S3C2410_TCNTB(4)); + __raw_writel(tcnt, S3C2410_TCMPB(4)); + + /* start the timer running */ + tcon |= S3C2410_TCON_T4START; + tcon &= ~S3C2410_TCON_T4MANUALUPD; + __raw_writel(tcon, S3C2410_TCON); +} + +static void __init s3c2410_timer_resources(void) +{ + struct platform_device tmpdev; + + tmpdev.dev.bus = &platform_bus_type; + tmpdev.id = 4; + + timerclk = clk_get(NULL, "timers"); + if (IS_ERR(timerclk)) + panic("failed to get clock for system timer"); + + clk_enable(timerclk); + + if (!use_tclk1_12()) { + tin = clk_get(&tmpdev.dev, "pwm-tin"); + if (IS_ERR(tin)) + panic("failed to get pwm-tin clock for system timer"); + + tdiv = clk_get(&tmpdev.dev, "pwm-tdiv"); + if (IS_ERR(tdiv)) + panic("failed to get pwm-tdiv clock for system timer"); + } + + clk_enable(tin); +} + +static void __init s3c2410_timer_init(void) +{ + s3c2410_timer_resources(); + s3c2410_timer_setup(); + setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); +} + +struct sys_timer s3c24xx_timer = { + .init = s3c2410_timer_init, + .offset = s3c2410_gettimeoffset, + .resume = s3c2410_timer_setup +}; |