diff options
Diffstat (limited to 'arch/arm/mach-s5pv310/include/mach')
18 files changed, 931 insertions, 0 deletions
diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S new file mode 100644 index 00000000000..b0d920c474d --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/debug-macro.S @@ -0,0 +1,35 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <mach/map.h> + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rp, rv + ldreq \rp, = S3C_PA_UART + ldrne \rv, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#define fifo_full fifo_full_s5pv210 +#define fifo_level fifo_level_s5pv210 + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5pv310/include/mach/entry-macro.S b/arch/arm/mach-s5pv310/include/mach/entry-macro.S new file mode 100644 index 00000000000..e600e1d522d --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/entry-macro.S @@ -0,0 +1,84 @@ +/* arch/arm/mach-s5pv310/include/mach/entry-macro.S + * + * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for S5PV310 platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include <mach/hardware.h> +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + addne \irqnr, \irqnr, #32 + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-s5pv310/include/mach/gpio.h b/arch/arm/mach-s5pv310/include/mach/gpio.h new file mode 100644 index 00000000000..20cb80c2346 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/gpio.h @@ -0,0 +1,135 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/gpio.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ + +/* GPIO bank sizes */ +#define S5PV310_GPIO_A0_NR (8) +#define S5PV310_GPIO_A1_NR (6) +#define S5PV310_GPIO_B_NR (8) +#define S5PV310_GPIO_C0_NR (5) +#define S5PV310_GPIO_C1_NR (5) +#define S5PV310_GPIO_D0_NR (4) +#define S5PV310_GPIO_D1_NR (4) +#define S5PV310_GPIO_E0_NR (5) +#define S5PV310_GPIO_E1_NR (8) +#define S5PV310_GPIO_E2_NR (6) +#define S5PV310_GPIO_E3_NR (8) +#define S5PV310_GPIO_E4_NR (8) +#define S5PV310_GPIO_F0_NR (8) +#define S5PV310_GPIO_F1_NR (8) +#define S5PV310_GPIO_F2_NR (8) +#define S5PV310_GPIO_F3_NR (6) +#define S5PV310_GPIO_J0_NR (8) +#define S5PV310_GPIO_J1_NR (5) +#define S5PV310_GPIO_K0_NR (7) +#define S5PV310_GPIO_K1_NR (7) +#define S5PV310_GPIO_K2_NR (7) +#define S5PV310_GPIO_K3_NR (7) +#define S5PV310_GPIO_L0_NR (8) +#define S5PV310_GPIO_L1_NR (3) +#define S5PV310_GPIO_L2_NR (8) +#define S5PV310_GPIO_X0_NR (8) +#define S5PV310_GPIO_X1_NR (8) +#define S5PV310_GPIO_X2_NR (8) +#define S5PV310_GPIO_X3_NR (8) +#define S5PV310_GPIO_Z_NR (7) + +/* GPIO bank numbers */ + +#define S5PV310_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p_gpio_number { + S5PV310_GPIO_A0_START = 0, + S5PV310_GPIO_A1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A0), + S5PV310_GPIO_B_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A1), + S5PV310_GPIO_C0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_B), + S5PV310_GPIO_C1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C0), + S5PV310_GPIO_D0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C1), + S5PV310_GPIO_D1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D0), + S5PV310_GPIO_E0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D1), + S5PV310_GPIO_E1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E0), + S5PV310_GPIO_E2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E1), + S5PV310_GPIO_E3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E2), + S5PV310_GPIO_E4_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E3), + S5PV310_GPIO_F0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E4), + S5PV310_GPIO_F1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F0), + S5PV310_GPIO_F2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F1), + S5PV310_GPIO_F3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F2), + S5PV310_GPIO_J0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F3), + S5PV310_GPIO_J1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J0), + S5PV310_GPIO_K0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J1), + S5PV310_GPIO_K1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K0), + S5PV310_GPIO_K2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K1), + S5PV310_GPIO_K3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K2), + S5PV310_GPIO_L0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K3), + S5PV310_GPIO_L1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L0), + S5PV310_GPIO_L2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L1), + S5PV310_GPIO_X0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L2), + S5PV310_GPIO_X1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X0), + S5PV310_GPIO_X2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X1), + S5PV310_GPIO_X3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X2), + S5PV310_GPIO_Z_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X3), +}; + +/* S5PV310 GPIO number definitions */ +#define S5PV310_GPA0(_nr) (S5PV310_GPIO_A0_START + (_nr)) +#define S5PV310_GPA1(_nr) (S5PV310_GPIO_A1_START + (_nr)) +#define S5PV310_GPB(_nr) (S5PV310_GPIO_B_START + (_nr)) +#define S5PV310_GPC0(_nr) (S5PV310_GPIO_C0_START + (_nr)) +#define S5PV310_GPC1(_nr) (S5PV310_GPIO_C1_START + (_nr)) +#define S5PV310_GPD0(_nr) (S5PV310_GPIO_D0_START + (_nr)) +#define S5PV310_GPD1(_nr) (S5PV310_GPIO_D1_START + (_nr)) +#define S5PV310_GPE0(_nr) (S5PV310_GPIO_E0_START + (_nr)) +#define S5PV310_GPE1(_nr) (S5PV310_GPIO_E1_START + (_nr)) +#define S5PV310_GPE2(_nr) (S5PV310_GPIO_E2_START + (_nr)) +#define S5PV310_GPE3(_nr) (S5PV310_GPIO_E3_START + (_nr)) +#define S5PV310_GPE4(_nr) (S5PV310_GPIO_E4_START + (_nr)) +#define S5PV310_GPF0(_nr) (S5PV310_GPIO_F0_START + (_nr)) +#define S5PV310_GPF1(_nr) (S5PV310_GPIO_F1_START + (_nr)) +#define S5PV310_GPF2(_nr) (S5PV310_GPIO_F2_START + (_nr)) +#define S5PV310_GPF3(_nr) (S5PV310_GPIO_F3_START + (_nr)) +#define S5PV310_GPJ0(_nr) (S5PV310_GPIO_J0_START + (_nr)) +#define S5PV310_GPJ1(_nr) (S5PV310_GPIO_J1_START + (_nr)) +#define S5PV310_GPK0(_nr) (S5PV310_GPIO_K0_START + (_nr)) +#define S5PV310_GPK1(_nr) (S5PV310_GPIO_K1_START + (_nr)) +#define S5PV310_GPK2(_nr) (S5PV310_GPIO_K2_START + (_nr)) +#define S5PV310_GPK3(_nr) (S5PV310_GPIO_K3_START + (_nr)) +#define S5PV310_GPL0(_nr) (S5PV310_GPIO_L0_START + (_nr)) +#define S5PV310_GPL1(_nr) (S5PV310_GPIO_L1_START + (_nr)) +#define S5PV310_GPL2(_nr) (S5PV310_GPIO_L2_START + (_nr)) +#define S5PV310_GPX0(_nr) (S5PV310_GPIO_X0_START + (_nr)) +#define S5PV310_GPX1(_nr) (S5PV310_GPIO_X1_START + (_nr)) +#define S5PV310_GPX2(_nr) (S5PV310_GPIO_X2_START + (_nr)) +#define S5PV310_GPX3(_nr) (S5PV310_GPIO_X3_START + (_nr)) +#define S5PV310_GPZ(_nr) (S5PV310_GPIO_Z_START + (_nr)) + +/* the end of the S5PV310 specific gpios */ +#define S5PV310_GPIO_END (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + 1) +#define S3C_GPIO_END S5PV310_GPIO_END + +/* define the number of gpios we need to the one after the GPZ() range */ +#define ARCH_NR_GPIOS (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + \ + CONFIG_SAMSUNG_GPIO_EXTRA + 1) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/hardware.h b/arch/arm/mach-s5pv310/include/mach/hardware.h new file mode 100644 index 00000000000..28ff9881f1a --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/hardware.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Hardware support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/io.h b/arch/arm/mach-s5pv310/include/mach/io.h new file mode 100644 index 00000000000..8a7f9128391 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/io.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/io.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> + * + * Based on arch/arm/mach-s5p6442/include/mach/io.h + * + * Default IO routines for S5PV310 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H __FILE__ + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h new file mode 100644 index 00000000000..99e7dad8a85 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/irqs.h @@ -0,0 +1,115 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - IRQ definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ + +#include <plat/irqs.h> + +/* PPI: Private Peripheral Interrupt */ + +#define IRQ_PPI(x) S5P_IRQ(x+16) + +#define IRQ_LOCALTIMER IRQ_PPI(13) + +/* SPI: Shared Peripheral Interrupt */ + +#define IRQ_SPI(x) S5P_IRQ(x+32) + +#define IRQ_EINT0 IRQ_SPI(40) +#define IRQ_EINT1 IRQ_SPI(41) +#define IRQ_EINT2 IRQ_SPI(42) +#define IRQ_EINT3 IRQ_SPI(43) +#define IRQ_USB_HSOTG IRQ_SPI(44) +#define IRQ_USB_HOST IRQ_SPI(45) +#define IRQ_MODEM_IF IRQ_SPI(46) +#define IRQ_ROTATOR IRQ_SPI(47) +#define IRQ_JPEG IRQ_SPI(48) +#define IRQ_2D IRQ_SPI(49) +#define IRQ_PCIE IRQ_SPI(50) +#define IRQ_SYSTEM_TIMER IRQ_SPI(51) +#define IRQ_MFC IRQ_SPI(52) +#define IRQ_WDT IRQ_SPI(53) +#define IRQ_AUDIO_SS IRQ_SPI(54) +#define IRQ_AC97 IRQ_SPI(55) +#define IRQ_SPDIF IRQ_SPI(56) +#define IRQ_KEYPAD IRQ_SPI(57) +#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58) +#define IRQ_SLIMBUS IRQ_SPI(59) +#define IRQ_PMU IRQ_SPI(60) +#define IRQ_TSI IRQ_SPI(61) +#define IRQ_SATA IRQ_SPI(62) +#define IRQ_GPS IRQ_SPI(63) + +#define MAX_IRQ_IN_COMBINER 8 +#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64)) +#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) + +#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0) +#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1) +#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2) +#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3) +#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4) + +#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) +#define IRQ_RTC_TIC COMBINER_IRQ(23, 1) + +#define IRQ_UART0 COMBINER_IRQ(26, 0) +#define IRQ_UART1 COMBINER_IRQ(26, 1) +#define IRQ_UART2 COMBINER_IRQ(26, 2) +#define IRQ_UART3 COMBINER_IRQ(26, 3) +#define IRQ_UART4 COMBINER_IRQ(26, 4) + +#define IRQ_IIC COMBINER_IRQ(27, 0) +#define IRQ_IIC1 COMBINER_IRQ(27, 1) +#define IRQ_IIC2 COMBINER_IRQ(27, 2) +#define IRQ_IIC3 COMBINER_IRQ(27, 3) +#define IRQ_IIC4 COMBINER_IRQ(27, 4) +#define IRQ_IIC5 COMBINER_IRQ(27, 5) +#define IRQ_IIC6 COMBINER_IRQ(27, 6) +#define IRQ_IIC7 COMBINER_IRQ(27, 7) + +#define IRQ_HSMMC0 COMBINER_IRQ(29, 0) +#define IRQ_HSMMC1 COMBINER_IRQ(29, 1) +#define IRQ_HSMMC2 COMBINER_IRQ(29, 2) +#define IRQ_HSMMC3 COMBINER_IRQ(29, 3) + +#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) + +#define IRQ_EINT4 COMBINER_IRQ(37, 0) +#define IRQ_EINT5 COMBINER_IRQ(37, 1) +#define IRQ_EINT6 COMBINER_IRQ(37, 2) +#define IRQ_EINT7 COMBINER_IRQ(37, 3) +#define IRQ_EINT8 COMBINER_IRQ(38, 0) + +#define IRQ_EINT9 COMBINER_IRQ(38, 1) +#define IRQ_EINT10 COMBINER_IRQ(38, 2) +#define IRQ_EINT11 COMBINER_IRQ(38, 3) +#define IRQ_EINT12 COMBINER_IRQ(38, 4) +#define IRQ_EINT13 COMBINER_IRQ(38, 5) +#define IRQ_EINT14 COMBINER_IRQ(38, 6) +#define IRQ_EINT15 COMBINER_IRQ(38, 7) + +#define IRQ_EINT16_31 COMBINER_IRQ(39, 0) + +#define MAX_COMBINER_NR 40 + +#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) + +#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0) +#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16) + +/* Set the default NR_IRQS */ + +#define NR_IRQS (S5P_IRQ_EINT_BASE + 32) + +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h new file mode 100644 index 00000000000..7acf4e77e92 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -0,0 +1,99 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/map.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> + +/* + * S5PV310 UART offset is 0x10000 but the older S5P SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x10000) + +#include <plat/map-s5p.h> + +#define S5PV310_PA_SYSRAM (0x02025000) + +#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) + +#define S5PC210_PA_ONENAND (0x0C000000) +#define S5P_PA_ONENAND S5PC210_PA_ONENAND + +#define S5PC210_PA_ONENAND_DMA (0x0C600000) +#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA + +#define S5PV310_PA_CHIPID (0x10000000) +#define S5P_PA_CHIPID S5PV310_PA_CHIPID + +#define S5PV310_PA_SYSCON (0x10010000) +#define S5P_PA_SYSCON S5PV310_PA_SYSCON + +#define S5PV310_PA_CMU (0x10030000) + +#define S5PV310_PA_WATCHDOG (0x10060000) +#define S5PV310_PA_RTC (0x10070000) + +#define S5PV310_PA_COMBINER (0x10448000) + +#define S5PV310_PA_COREPERI (0x10500000) +#define S5PV310_PA_GIC_CPU (0x10500100) +#define S5PV310_PA_TWD (0x10500600) +#define S5PV310_PA_GIC_DIST (0x10501000) +#define S5PV310_PA_L2CC (0x10502000) + +#define S5PV310_PA_GPIO1 (0x11400000) +#define S5PV310_PA_GPIO2 (0x11000000) +#define S5PV310_PA_GPIO3 (0x03860000) + +#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) + +#define S5PV310_PA_SROMC (0x12570000) + +#define S5PV310_PA_UART (0x13800000) + +#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) +#define S5P_PA_UART4 S5P_PA_UART(4) + +#define S5P_SZ_UART SZ_256 + +#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) + +#define S5PV310_PA_TIMER (0x139D0000) +#define S5P_PA_TIMER S5PV310_PA_TIMER + +#define S5PV310_PA_SDRAM (0x40000000) +#define S5P_PA_SDRAM S5PV310_PA_SDRAM + +/* compatibiltiy defines. */ +#define S3C_PA_UART S5PV310_PA_UART +#define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2) +#define S3C_PA_HSMMC3 S5PV310_PA_HSMMC(3) +#define S3C_PA_IIC S5PV310_PA_IIC(0) +#define S3C_PA_IIC1 S5PV310_PA_IIC(1) +#define S3C_PA_IIC2 S5PV310_PA_IIC(2) +#define S3C_PA_IIC3 S5PV310_PA_IIC(3) +#define S3C_PA_IIC4 S5PV310_PA_IIC(4) +#define S3C_PA_IIC5 S5PV310_PA_IIC(5) +#define S3C_PA_IIC6 S5PV310_PA_IIC(6) +#define S3C_PA_IIC7 S5PV310_PA_IIC(7) +#define S3C_PA_RTC S5PV310_PA_RTC +#define S3C_PA_WDT S5PV310_PA_WATCHDOG + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/memory.h b/arch/arm/mach-s5pv310/include/mach/memory.h new file mode 100644 index 00000000000..1dffb482324 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/memory.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/memory.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Memory definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H __FILE__ + +#define PHYS_OFFSET UL(0x40000000) + +/* Maximum of 256MiB in one bank */ +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS 28 + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h new file mode 100644 index 00000000000..7e6da270108 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h @@ -0,0 +1,70 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h + * + * S5PV310 - pwm clock and timer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_PWMCLK_H +#define __ASM_ARCH_PWMCLK_H __FILE__ + +/** + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk + * @tcfg: The timer TCFG1 register bits shifted down to 0. + * + * Return true if the given configuration from TCFG1 is a TCLK instead + * any of the TDIV clocks. + */ +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) +{ + return tcfg == S3C64XX_TCFG1_MUX_TCLK; +} + +/** + * tcfg_to_divisor() - convert tcfg1 setting to a divisor + * @tcfg1: The tcfg1 setting, shifted down. + * + * Get the divisor value for the given tcfg1 setting. We assume the + * caller has already checked to see if this is not a TCLK source. + */ +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << tcfg1; +} + +/** + * pwm_tdiv_has_div1() - does the tdiv setting have a /1 + * + * Return true if we have a /1 in the tdiv setting. + */ +static inline unsigned int pwm_tdiv_has_div1(void) +{ + return 1; +} + +/** + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. + * @div: The divisor to calculate the bit information for. + * + * Turn a divisor into the necessary bit field for TCFG1. + */ +static inline unsigned long pwm_tdiv_div_bits(unsigned int div) +{ + return ilog2(div); +} + +#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK + +#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h new file mode 100644 index 00000000000..f1028cad978 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h @@ -0,0 +1,91 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S5P_VA_CMU + (x)) + +#define S5P_INFORM0 S5P_CLKREG(0x800) + +#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) +#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) +#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) +#define S5P_VPLL_CON1 S5P_CLKREG(0x0C124) + +#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) +#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) +#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) +#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) +#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) +#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) +#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) +#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) + +#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) +#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) +#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) +#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) +#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) +#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) +#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548) +#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C) +#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550) +#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554) +#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558) +#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C) +#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) +#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) + +#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) +#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) +#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) +#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) +#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) + +#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) +#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) +#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) +#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) +#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) +#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) + +#define S5P_CLKSRC_CORE S5P_CLKREG(0x10200) +#define S5P_CLKDIV_CORE0 S5P_CLKREG(0x10500) + +#define S5P_APLL_LOCK S5P_CLKREG(0x14000) +#define S5P_MPLL_LOCK S5P_CLKREG(0x14004) +#define S5P_APLL_CON0 S5P_CLKREG(0x14100) +#define S5P_APLL_CON1 S5P_CLKREG(0x14104) +#define S5P_MPLL_CON0 S5P_CLKREG(0x14108) +#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C) + +#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200) +#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) + +#define S5P_CLKDIV_CPU S5P_CLKREG(0x14500) +#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600) + +#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) + +/* Compatibility defines */ + +#define S5P_EPLL_CON S5P_EPLL_CON0 + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h new file mode 100644 index 00000000000..82e9e0c9d45 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h @@ -0,0 +1,42 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-gpio.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - GPIO (including EINT) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> +#include <mach/irqs.h> + +#define S5PV310_EINT40CON (S5P_VA_GPIO2 + 0xE00) +#define S5P_EINT_CON(x) (S5PV310_EINT40CON + ((x) * 0x4)) + +#define S5PV310_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) +#define S5P_EINT_FLTCON(x) (S5PV310_EINT40FLTCON0 + ((x) * 0x4)) + +#define S5PV310_EINT40MASK (S5P_VA_GPIO2 + 0xF00) +#define S5P_EINT_MASK(x) (S5PV310_EINT40MASK + ((x) * 0x4)) + +#define S5PV310_EINT40PEND (S5P_VA_GPIO2 + 0xF40) +#define S5P_EINT_PEND(x) (S5PV310_EINT40PEND + ((x) * 0x4)) + +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) + +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define EINT_GPIO_0(x) S5PV310_GPX0(x) +#define EINT_GPIO_1(x) S5PV310_GPX1(x) +#define EINT_GPIO_2(x) S5PV310_GPX2(x) +#define EINT_GPIO_3(x) S5PV310_GPX3(x) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-irq.h b/arch/arm/mach-s5pv310/include/mach/regs-irq.h new file mode 100644 index 00000000000..c6e09c7f916 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-irq.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include <asm/hardware/gic.h> +#include <mach/map.h> + +#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-srom.h b/arch/arm/mach-s5pv310/include/mach/regs-srom.h new file mode 100644 index 00000000000..1898b3e1055 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-srom.h @@ -0,0 +1,50 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-srom.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - SROMC register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_SROM_H +#define __ASM_ARCH_REGS_SROM_H __FILE__ + +#include <mach/map.h> + +#define S5PV310_SROMREG(x) (S5P_VA_SROMC + (x)) + +#define S5PV310_SROM_BW S5PV310_SROMREG(0x0) +#define S5PV310_SROM_BC0 S5PV310_SROMREG(0x4) +#define S5PV310_SROM_BC1 S5PV310_SROMREG(0x8) +#define S5PV310_SROM_BC2 S5PV310_SROMREG(0xc) +#define S5PV310_SROM_BC3 S5PV310_SROMREG(0x10) + +/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ + +#define S5PV310_SROM_BW__DATAWIDTH__SHIFT 0 +#define S5PV310_SROM_BW__ADDRMODE__SHIFT 1 +#define S5PV310_SROM_BW__WAITENABLE__SHIFT 2 +#define S5PV310_SROM_BW__BYTEENABLE__SHIFT 3 + +#define S5PV310_SROM_BW__CS_MASK 0xf + +#define S5PV310_SROM_BW__NCS0__SHIFT 0 +#define S5PV310_SROM_BW__NCS1__SHIFT 4 +#define S5PV310_SROM_BW__NCS2__SHIFT 8 +#define S5PV310_SROM_BW__NCS3__SHIFT 12 + +/* applies to same to BCS0 - BCS3 */ + +#define S5PV310_SROM_BCX__PMC__SHIFT 0 +#define S5PV310_SROM_BCX__TACP__SHIFT 4 +#define S5PV310_SROM_BCX__TCAH__SHIFT 8 +#define S5PV310_SROM_BCX__TCOH__SHIFT 12 +#define S5PV310_SROM_BCX__TACC__SHIFT 16 +#define S5PV310_SROM_BCX__TCOS__SHIFT 24 +#define S5PV310_SROM_BCX__TACS__SHIFT 28 + +#endif /* __ASM_ARCH_REGS_SROM_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h new file mode 100644 index 00000000000..b7ec252384f --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/smp.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/smp.h + * + * Cloned from arch/arm/mach-realview/include/mach/smp.h +*/ + +#ifndef ASM_ARCH_SMP_H +#define ASM_ARCH_SMP_H __FILE__ + +#include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> + +extern void __iomem *gic_cpu_base_addr; + +/* + * We use IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} + +#endif diff --git a/arch/arm/mach-s5pv310/include/mach/system.h b/arch/arm/mach-s5pv310/include/mach/system.h new file mode 100644 index 00000000000..d10c009cf0f --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/system.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/system.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +#include <plat/system-reset.h> + +static void arch_idle(void) +{ + /* nothing here yet */ +} +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/timex.h b/arch/arm/mach-s5pv310/include/mach/timex.h new file mode 100644 index 00000000000..bd2359b952b --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/timex.h @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/timex.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright (c) 2003-2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Based on arch/arm/mach-s5p6442/include/mach/timex.h + * + * S5PV310 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H __FILE__ + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/uncompress.h b/arch/arm/mach-s5pv310/include/mach/uncompress.h new file mode 100644 index 00000000000..59593c1e241 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/uncompress.h @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/uncompress.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H __FILE__ + +#include <mach/map.h> +#include <plat/uncompress.h> + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ + + /* + * For preventing FIFO overrun or infinite loop of UART console, + * fifo_max should be the minimum fifo size of all of the UART channels + */ + fifo_mask = S5PV210_UFSTAT_TXMASK; + fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT; +} +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-s5pv310/include/mach/vmalloc.h new file mode 100644 index 00000000000..65759fb9758 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/vmalloc.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/vmalloc.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S5PV310 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H __FILE__ + +#define VMALLOC_END 0xF6000000UL + +#endif /* __ASM_ARCH_VMALLOC_H */ |