diff options
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/debug-macro.S | 23 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mx25.h | 4 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mx2x.h | 5 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mx3x.h | 5 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mx51.h | 5 |
5 files changed, 7 insertions, 35 deletions
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index d56213fb901..3b3a37c25c5 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -10,58 +10,49 @@ * published by the Free Software Foundation. * */ -#define IMX_NEEDS_DEPRECATED_SYMBOLS +#include <mach/hardware.h> #ifdef CONFIG_ARCH_MX1 -#include <mach/mx1.h> -#define UART_PADDR UART1_BASE_ADDR -#define UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) +#define UART_PADDR MX1_UART1_BASE_ADDR #endif #ifdef CONFIG_ARCH_MX25 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mx25.h> #define UART_PADDR MX25_UART1_BASE_ADDR -#define UART_VADDR MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR) #endif #ifdef CONFIG_ARCH_MX2 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mx2x.h> -#define UART_PADDR UART1_BASE_ADDR -#define UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) +#define UART_PADDR MX2x_UART1_BASE_ADDR #endif #ifdef CONFIG_ARCH_MX3 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mx3x.h> -#define UART_PADDR UART1_BASE_ADDR -#define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) +#define UART_PADDR MX3x_UART1_BASE_ADDR #endif #ifdef CONFIG_ARCH_MX5 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mx51.h> #define UART_PADDR MX51_UART1_BASE_ADDR -#define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR) #endif #ifdef CONFIG_ARCH_MXC91231 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif -#include <mach/mxc91231.h> #define UART_PADDR MXC91231_UART2_BASE_ADDR -#define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) #endif + +#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) + .macro addruart, rp, rv ldr \rp, =UART_PADDR @ physical ldr \rv, =UART_VADDR @ virtual diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index aac6a9c2b30..a2404b0d980 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -2,7 +2,6 @@ #define __MACH_MX25_H__ #define MX25_AIPS1_BASE_ADDR 0x43f00000 -#define MX25_AIPS1_BASE_ADDR_VIRT 0xf5300000 #define MX25_AIPS1_SIZE SZ_1M #define MX25_AIPS2_BASE_ADDR 0x53f00000 #define MX25_AIPS2_SIZE SZ_1M @@ -25,9 +24,6 @@ #define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000) #define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000) -#define MX25_AIPS1_IO_ADDRESS(x) \ - (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT) - #define MX25_UART1_BASE_ADDR 0x43f90000 #define MX25_UART2_BASE_ADDR 0x43f94000 #define MX25_AUDMUX_BASE_ADDR 0x43fb0000 diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index 46eeeb21533..a05694816cb 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -27,7 +27,6 @@ /* Register offsets */ #define MX2x_AIPI_BASE_ADDR 0x10000000 -#define MX2x_AIPI_BASE_ADDR_VIRT 0xf4400000 #define MX2x_AIPI_SIZE SZ_1M #define MX2x_DMA_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x01000) #define MX2x_WDOG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x02000) @@ -68,9 +67,6 @@ #define MX2x_SAHB1_SIZE SZ_1M #define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) -#define AIPI_IO_ADDRESS(x) \ - (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT) - /* fixed interrupt numbers */ #define MX2x_INT_CSPI3 6 #define MX2x_INT_GPIO 8 @@ -148,7 +144,6 @@ #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR -#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT #define AIPI_SIZE MX2x_AIPI_SIZE #define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR #define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index da22cd48182..3d6cc455cee 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -44,7 +44,6 @@ * AIPS 1 */ #define MX3x_AIPS1_BASE_ADDR 0x43f00000 -#define MX3x_AIPS1_BASE_ADDR_VIRT 0xf5300000 #define MX3x_AIPS1_SIZE SZ_1M #define MX3x_MAX_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x04000) #define MX3x_EVTMON_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x08000) @@ -141,9 +140,6 @@ #define MX3x_PCMCIA_MEM_BASE_ADDR 0xbc000000 -#define AIPS1_IO_ADDRESS(x) \ - (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) - /* * Interrupt numbers */ @@ -230,7 +226,6 @@ static inline int mx35_revision(void) #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR #define L2CC_SIZE MX3x_L2CC_SIZE #define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR -#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT #define AIPS1_SIZE MX3x_AIPS1_SIZE #define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR #define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 1b8715f2847..636347c3fa8 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -53,7 +53,6 @@ * AIPS 1 */ #define MX51_AIPS1_BASE_ADDR 0x73f00000 -#define MX51_AIPS1_BASE_ADDR_VIRT 0xf5700000 #define MX51_AIPS1_SIZE SZ_1M #define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000) @@ -137,10 +136,6 @@ #define MX51_IO_P2V(x) IMX_IO_P2V(x) #define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x)) -/* This is currently used in <mach/debug-macro.S>, but should go away */ -#define MX51_AIPS1_IO_ADDRESS(x) \ - (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) - /* * defines for SPBA modules */ |