aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-09-15 09:51:09 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-09-15 09:51:09 -0700
commit723e9db7a46e328527cc3da2b478b831184fe828 (patch)
treecdeda255633057dcb4c84097bed27b2bbf76970f
parentada3fa15057205b7d3f727bba5cd26b5912e350f (diff)
parentd331d8305cba713605854aab63a000fb892353a7 (diff)
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits) powerpc/nvram: Enable use Generic NVRAM driver for different size chips powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline powerpc/ps3: Workaround for flash memory I/O error powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead powerpc/perf_counters: Reduce stack usage of power_check_constraints powerpc: Fix bug where perf_counters breaks oprofile powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops powerpc/irq: Improve nanodoc powerpc: Fix some late PowerMac G5 with PCIe ATI graphics powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT powerpc/book3e: Add missing page sizes powerpc/pseries: Fix to handle slb resize across migration powerpc/powermac: Thermal control turns system off too eagerly powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan() powerpc/405ex: support cuImage via included dtb powerpc/405ex: provide necessary fixup function to support cuImage powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support. powerpc/44x: Update Arches defconfig powerpc/44x: Update Arches dts ... Fix up conflicts in drivers/char/agp/uninorth-agp.c
-rw-r--r--arch/powerpc/Kconfig29
-rw-r--r--arch/powerpc/Makefile2
-rw-r--r--arch/powerpc/boot/4xx.c142
-rw-r--r--arch/powerpc/boot/4xx.h1
-rw-r--r--arch/powerpc/boot/Makefile6
-rw-r--r--arch/powerpc/boot/cuboot-hotfoot.c142
-rw-r--r--arch/powerpc/boot/cuboot-kilauea.c49
-rw-r--r--arch/powerpc/boot/dcr.h4
-rw-r--r--arch/powerpc/boot/dts/arches.dts50
-rw-r--r--arch/powerpc/boot/dts/canyonlands.dts49
-rw-r--r--arch/powerpc/boot/dts/eiger.dts421
-rw-r--r--arch/powerpc/boot/dts/gef_sbc310.dts64
-rw-r--r--arch/powerpc/boot/dts/hotfoot.dts294
-rw-r--r--arch/powerpc/boot/dts/kilauea.dts44
-rw-r--r--arch/powerpc/boot/dts/mgcoge.dts53
-rw-r--r--arch/powerpc/boot/dts/mpc8272ads.dts8
-rw-r--r--arch/powerpc/boot/dts/mpc8377_rdb.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc8377_wlan.dts464
-rw-r--r--arch/powerpc/boot/dts/mpc8378_rdb.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc8379_rdb.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc8536ds.dts40
-rw-r--r--arch/powerpc/boot/dts/mpc8536ds_36b.dts475
-rw-r--r--arch/powerpc/boot/dts/mpc8548cds.dts20
-rw-r--r--arch/powerpc/boot/dts/mpc8569mds.dts45
-rw-r--r--arch/powerpc/boot/dts/p2020rdb.dts586
-rw-r--r--arch/powerpc/boot/dts/sbc8349.dts60
-rw-r--r--arch/powerpc/boot/dts/sbc8560.dts1
-rw-r--r--arch/powerpc/boot/mktree.c10
-rw-r--r--arch/powerpc/boot/ppcboot-hotfoot.h133
-rwxr-xr-xarch/powerpc/boot/wrapper3
-rw-r--r--arch/powerpc/configs/40x/kilauea_defconfig298
-rw-r--r--arch/powerpc/configs/44x/arches_defconfig382
-rw-r--r--arch/powerpc/configs/44x/canyonlands_defconfig350
-rw-r--r--arch/powerpc/configs/44x/eiger_defconfig1252
-rw-r--r--arch/powerpc/configs/83xx/sbc834x_defconfig320
-rw-r--r--arch/powerpc/configs/mgcoge_defconfig86
-rw-r--r--arch/powerpc/configs/mpc85xx_defconfig1
-rw-r--r--arch/powerpc/include/asm/bitops.h196
-rw-r--r--arch/powerpc/include/asm/cell-regs.h11
-rw-r--r--arch/powerpc/include/asm/cputhreads.h16
-rw-r--r--arch/powerpc/include/asm/device.h7
-rw-r--r--arch/powerpc/include/asm/dma-mapping.h318
-rw-r--r--arch/powerpc/include/asm/exception-64e.h205
-rw-r--r--arch/powerpc/include/asm/exception-64s.h (renamed from arch/powerpc/include/asm/exception.h)25
-rw-r--r--arch/powerpc/include/asm/hardirq.h30
-rw-r--r--arch/powerpc/include/asm/hw_irq.h5
-rw-r--r--arch/powerpc/include/asm/iommu.h10
-rw-r--r--arch/powerpc/include/asm/irq.h7
-rw-r--r--arch/powerpc/include/asm/machdep.h6
-rw-r--r--arch/powerpc/include/asm/mmu-40x.h3
-rw-r--r--arch/powerpc/include/asm/mmu-44x.h6
-rw-r--r--arch/powerpc/include/asm/mmu-8xx.h3
-rw-r--r--arch/powerpc/include/asm/mmu-book3e.h208
-rw-r--r--arch/powerpc/include/asm/mmu-hash32.h16
-rw-r--r--arch/powerpc/include/asm/mmu-hash64.h22
-rw-r--r--arch/powerpc/include/asm/mmu.h46
-rw-r--r--arch/powerpc/include/asm/mmu_context.h15
-rw-r--r--arch/powerpc/include/asm/nvram.h3
-rw-r--r--arch/powerpc/include/asm/paca.h23
-rw-r--r--arch/powerpc/include/asm/page.h4
-rw-r--r--arch/powerpc/include/asm/page_64.h10
-rw-r--r--arch/powerpc/include/asm/pci-bridge.h40
-rw-r--r--arch/powerpc/include/asm/pci.h11
-rw-r--r--arch/powerpc/include/asm/pgalloc.h46
-rw-r--r--arch/powerpc/include/asm/pgtable-ppc32.h9
-rw-r--r--arch/powerpc/include/asm/pgtable-ppc64-64k.h4
-rw-r--r--arch/powerpc/include/asm/pgtable-ppc64.h67
-rw-r--r--arch/powerpc/include/asm/pmc.h16
-rw-r--r--arch/powerpc/include/asm/ppc-opcode.h6
-rw-r--r--arch/powerpc/include/asm/ppc-pci.h1
-rw-r--r--arch/powerpc/include/asm/ppc_asm.h26
-rw-r--r--arch/powerpc/include/asm/pte-40x.h2
-rw-r--r--arch/powerpc/include/asm/pte-44x.h2
-rw-r--r--arch/powerpc/include/asm/pte-8xx.h1
-rw-r--r--arch/powerpc/include/asm/pte-book3e.h84
-rw-r--r--arch/powerpc/include/asm/pte-common.h25
-rw-r--r--arch/powerpc/include/asm/pte-fsl-booke.h9
-rw-r--r--arch/powerpc/include/asm/pte-hash32.h1
-rw-r--r--arch/powerpc/include/asm/reg.h141
-rw-r--r--arch/powerpc/include/asm/reg_booke.h50
-rw-r--r--arch/powerpc/include/asm/setup.h2
-rw-r--r--arch/powerpc/include/asm/smp.h10
-rw-r--r--arch/powerpc/include/asm/swiotlb.h8
-rw-r--r--arch/powerpc/include/asm/systbl.h4
-rw-r--r--arch/powerpc/include/asm/tlb.h38
-rw-r--r--arch/powerpc/include/asm/tlbflush.h11
-rw-r--r--arch/powerpc/include/asm/vdso.h3
-rw-r--r--arch/powerpc/kernel/Makefile19
-rw-r--r--arch/powerpc/kernel/asm-offsets.c19
-rw-r--r--arch/powerpc/kernel/cpu_setup_6xx.S2
-rw-r--r--arch/powerpc/kernel/cputable.c62
-rw-r--r--arch/powerpc/kernel/dma-iommu.c2
-rw-r--r--arch/powerpc/kernel/dma-swiotlb.c53
-rw-r--r--arch/powerpc/kernel/dma.c13
-rw-r--r--arch/powerpc/kernel/entry_32.S20
-rw-r--r--arch/powerpc/kernel/entry_64.S102
-rw-r--r--arch/powerpc/kernel/exceptions-64e.S1001
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S78
-rw-r--r--arch/powerpc/kernel/fpu.S2
-rw-r--r--arch/powerpc/kernel/head_32.S40
-rw-r--r--arch/powerpc/kernel/head_40x.S124
-rw-r--r--arch/powerpc/kernel/head_44x.S58
-rw-r--r--arch/powerpc/kernel/head_64.S83
-rw-r--r--arch/powerpc/kernel/head_8xx.S13
-rw-r--r--arch/powerpc/kernel/head_booke.h50
-rw-r--r--arch/powerpc/kernel/head_fsl_booke.S100
-rw-r--r--arch/powerpc/kernel/ibmebus.c2
-rw-r--r--arch/powerpc/kernel/lparcfg.c3
-rw-r--r--arch/powerpc/kernel/misc_32.S7
-rw-r--r--arch/powerpc/kernel/of_platform.c2
-rw-r--r--arch/powerpc/kernel/paca.c3
-rw-r--r--arch/powerpc/kernel/pci-common.c133
-rw-r--r--arch/powerpc/kernel/pci_32.c105
-rw-r--r--arch/powerpc/kernel/pci_64.c335
-rw-r--r--arch/powerpc/kernel/pci_of_scan.c358
-rw-r--r--arch/powerpc/kernel/perf_counter.c68
-rw-r--r--arch/powerpc/kernel/process.c16
-rw-r--r--arch/powerpc/kernel/prom_init.c107
-rw-r--r--arch/powerpc/kernel/rtas.c7
-rw-r--r--arch/powerpc/kernel/setup_32.c8
-rw-r--r--arch/powerpc/kernel/setup_64.c34
-rw-r--r--arch/powerpc/kernel/smp.c15
-rw-r--r--arch/powerpc/kernel/sys_ppc32.c12
-rw-r--r--arch/powerpc/kernel/sysfs.c3
-rw-r--r--arch/powerpc/kernel/time.c33
-rw-r--r--arch/powerpc/kernel/vdso.c7
-rw-r--r--arch/powerpc/kernel/vdso32/Makefile1
-rw-r--r--arch/powerpc/kernel/vdso64/Makefile2
-rw-r--r--arch/powerpc/kernel/vector.S2
-rw-r--r--arch/powerpc/kernel/vio.c2
-rw-r--r--arch/powerpc/kernel/vmlinux.lds.S8
-rw-r--r--arch/powerpc/kvm/booke_interrupts.S18
-rw-r--r--arch/powerpc/mm/40x_mmu.c4
-rw-r--r--arch/powerpc/mm/Makefile1
-rw-r--r--arch/powerpc/mm/fsl_booke_mmu.c2
-rw-r--r--arch/powerpc/mm/hash_low_32.S4
-rw-r--r--arch/powerpc/mm/hugetlbpage.c8
-rw-r--r--arch/powerpc/mm/init_32.c2
-rw-r--r--arch/powerpc/mm/init_64.c55
-rw-r--r--arch/powerpc/mm/mmu_context_nohash.c96
-rw-r--r--arch/powerpc/mm/mmu_decl.h37
-rw-r--r--arch/powerpc/mm/pgtable.c179
-rw-r--r--arch/powerpc/mm/pgtable_32.c2
-rw-r--r--arch/powerpc/mm/pgtable_64.c59
-rw-r--r--arch/powerpc/mm/slb.c46
-rw-r--r--arch/powerpc/mm/tlb_hash32.c3
-rw-r--r--arch/powerpc/mm/tlb_hash64.c20
-rw-r--r--arch/powerpc/mm/tlb_low_64e.S770
-rw-r--r--arch/powerpc/mm/tlb_nohash.c268
-rw-r--r--arch/powerpc/mm/tlb_nohash_low.S87
-rw-r--r--arch/powerpc/platforms/40x/Kconfig10
-rw-r--r--arch/powerpc/platforms/40x/ppc40x_simple.c3
-rw-r--r--arch/powerpc/platforms/44x/Kconfig12
-rw-r--r--arch/powerpc/platforms/44x/ppc44x_simple.c1
-rw-r--r--arch/powerpc/platforms/82xx/mgcoge.c69
-rw-r--r--arch/powerpc/platforms/82xx/mpc8272_ads.c22
-rw-r--r--arch/powerpc/platforms/83xx/Kconfig4
-rw-r--r--arch/powerpc/platforms/83xx/mpc837x_rdb.c28
-rw-r--r--arch/powerpc/platforms/83xx/mpc83xx.h4
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig9
-rw-r--r--arch/powerpc/platforms/85xx/Makefile3
-rw-r--r--arch/powerpc/platforms/85xx/mpc8536_ds.c3
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ds.c3
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c7
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_rdb.c141
-rw-r--r--arch/powerpc/platforms/85xx/sbc8560.c39
-rw-r--r--arch/powerpc/platforms/85xx/smp.c23
-rw-r--r--arch/powerpc/platforms/86xx/gef_ppc9a.c37
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c3
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_smp.c1
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype38
-rw-r--r--arch/powerpc/platforms/amigaone/setup.c6
-rw-r--r--arch/powerpc/platforms/cell/Kconfig7
-rw-r--r--arch/powerpc/platforms/cell/celleb_setup.c3
-rw-r--r--arch/powerpc/platforms/cell/iommu.c2
-rw-r--r--arch/powerpc/platforms/cell/smp.c2
-rw-r--r--arch/powerpc/platforms/cell/spufs/Makefile3
-rw-r--r--arch/powerpc/platforms/cell/spufs/context.c1
-rw-r--r--arch/powerpc/platforms/cell/spufs/file.c1
-rw-r--r--arch/powerpc/platforms/cell/spufs/sched.c2
-rw-r--r--arch/powerpc/platforms/cell/spufs/spufs.h5
-rw-r--r--arch/powerpc/platforms/cell/spufs/sputrace.c272
-rw-r--r--arch/powerpc/platforms/cell/spufs/sputrace.h39
-rw-r--r--arch/powerpc/platforms/iseries/exception.S59
-rw-r--r--arch/powerpc/platforms/iseries/exception.h6
-rw-r--r--arch/powerpc/platforms/iseries/mf.c2
-rw-r--r--arch/powerpc/platforms/pasemi/idle.c2
-rw-r--r--arch/powerpc/platforms/powermac/cpufreq_32.c8
-rw-r--r--arch/powerpc/platforms/powermac/feature.c13
-rw-r--r--arch/powerpc/platforms/powermac/pci.c61
-rw-r--r--arch/powerpc/platforms/powermac/smp.c2
-rw-r--r--arch/powerpc/platforms/ps3/mm.c2
-rw-r--r--arch/powerpc/platforms/ps3/system-bus.c6
-rw-r--r--arch/powerpc/platforms/pseries/pci_dlpar.c2
-rw-r--r--arch/powerpc/platforms/pseries/reconfig.c9
-rw-r--r--arch/powerpc/platforms/pseries/setup.c4
-rw-r--r--arch/powerpc/platforms/pseries/smp.c2
-rw-r--r--arch/powerpc/sysdev/fsl_rio.c18
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c6
-rw-r--r--arch/powerpc/sysdev/ipic.c7
-rw-r--r--arch/powerpc/sysdev/mmio_nvram.c32
-rw-r--r--arch/powerpc/sysdev/mpic.c13
-rw-r--r--arch/powerpc/sysdev/qe_lib/gpio.c4
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_ic.c5
-rw-r--r--arch/powerpc/xmon/Makefile2
-rw-r--r--arch/powerpc/xmon/xmon.c2
-rw-r--r--drivers/block/ps3vram.c2
-rw-r--r--drivers/char/agp/uninorth-agp.c49
-rw-r--r--drivers/char/generic_nvram.c27
-rw-r--r--drivers/char/hvc_console.c2
-rw-r--r--drivers/char/hvc_vio.c4
-rw-r--r--drivers/char/hvsi.c3
-rw-r--r--drivers/macintosh/macio_asic.c6
-rw-r--r--drivers/macintosh/therm_windtunnel.c4
-rw-r--r--drivers/ps3/ps3stor_lib.c65
-rw-r--r--drivers/video/ps3fb.c2
-rw-r--r--include/linux/dma-mapping.h1
-rw-r--r--include/linux/pci_ids.h1
-rw-r--r--kernel/gcov/Kconfig2
-rw-r--r--lib/Kconfig.debug2
220 files changed, 11256 insertions, 2461 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2c42e1526d0..8250902265c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -123,7 +123,8 @@ config PPC
select HAVE_KRETPROBES
select HAVE_ARCH_TRACEHOOK
select HAVE_LMB
- select HAVE_DMA_ATTRS if PPC64
+ select HAVE_DMA_ATTRS
+ select HAVE_DMA_API_DEBUG
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_OPROFILE
select HAVE_SYSCALL_WRAPPERS if PPC64
@@ -310,10 +311,6 @@ config SWIOTLB
platforms where the size of a physical address is larger
than the bus address. Not all platforms support this.
-config PPC_NEED_DMA_SYNC_OPS
- def_bool y
- depends on (NOT_COHERENT_CACHE || SWIOTLB)
-
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
@@ -475,7 +472,7 @@ config PPC_16K_PAGES
bool "16k page size" if 44x
config PPC_64K_PAGES
- bool "64k page size" if 44x || PPC_STD_MMU_64
+ bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
select PPC_HAS_HASH_64K if PPC_STD_MMU_64
config PPC_256K_PAGES
@@ -495,16 +492,16 @@ endchoice
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
- range 9 64 if PPC_STD_MMU_64 && PPC_64K_PAGES
- default "9" if PPC_STD_MMU_64 && PPC_64K_PAGES
- range 13 64 if PPC_STD_MMU_64 && !PPC_64K_PAGES
- default "13" if PPC_STD_MMU_64 && !PPC_64K_PAGES
- range 9 64 if PPC_STD_MMU_32 && PPC_16K_PAGES
- default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES
- range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES
- default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES
- range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES
- default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES
+ range 9 64 if PPC64 && PPC_64K_PAGES
+ default "9" if PPC64 && PPC_64K_PAGES
+ range 13 64 if PPC64 && !PPC_64K_PAGES
+ default "13" if PPC64 && !PPC_64K_PAGES
+ range 9 64 if PPC32 && PPC_16K_PAGES
+ default "9" if PPC32 && PPC_16K_PAGES
+ range 7 64 if PPC32 && PPC_64K_PAGES
+ default "7" if PPC32 && PPC_64K_PAGES
+ range 5 64 if PPC32 && PPC_256K_PAGES
+ default "5" if PPC32 && PPC_256K_PAGES
range 11 64
default "11"
help
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index bc35f4e2b81..952a3963e9e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -77,7 +77,7 @@ CPP = $(CC) -E $(KBUILD_CFLAGS)
CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
ifeq ($(CONFIG_PPC64),y)
-GCC_BROKEN_VEC := $(shell if [ $(call cc-version) -lt 0400 ] ; then echo "y"; fi)
+GCC_BROKEN_VEC := $(call cc-ifversion, -lt, 0400, y)
ifeq ($(CONFIG_POWER4_ONLY),y)
ifeq ($(CONFIG_ALTIVEC),y)
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 325b310573b..27db8938827 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -8,6 +8,10 @@
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003, 2004 Zultys Technologies
*
+ * Copyright (C) 2009 Wind River Systems, Inc.
+ * Updated for supporting PPC405EX on Kilauea.
+ * Tiejun Chen <tiejun.chen@windriver.com>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -659,3 +663,141 @@ void ibm405ep_fixup_clocks(unsigned int sys_clk)
dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
}
+
+static u8 ibm405ex_fwdv_multi_bits[] = {
+ /* values for: 1 - 16 */
+ 0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05,
+ 0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03
+};
+
+u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv)
+{
+ u32 index;
+
+ for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++)
+ if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index])
+ return index + 1;
+
+ return 0;
+}
+
+static u8 ibm405ex_fbdv_multi_bits[] = {
+ /* values for: 1 - 100 */
+ 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
+ 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
+ 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
+ 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
+ 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
+ 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
+ 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
+ 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
+ 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
+ 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
+ /* values for: 101 - 200 */
+ 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
+ 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
+ 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
+ 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
+ 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
+ 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
+ 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
+ 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
+ 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
+ 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
+ /* values for: 201 - 255 */
+ 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
+ 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
+ 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
+ 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
+ 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
+ 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
+};
+
+u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv)
+{
+ u32 index;
+
+ for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++)
+ if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index])
+ return index + 1;
+
+ return 0;
+}
+
+void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk)
+{
+ /* PLL config */
+ u32 pllc = CPR0_READ(DCRN_CPR0_PLLC);
+ u32 plld = CPR0_READ(DCRN_CPR0_PLLD);
+ u32 cpud = CPR0_READ(DCRN_CPR0_PRIMAD);
+ u32 plbd = CPR0_READ(DCRN_CPR0_PRIMBD);
+ u32 opbd = CPR0_READ(DCRN_CPR0_OPBD);
+ u32 perd = CPR0_READ(DCRN_CPR0_PERD);
+
+ /* Dividers */
+ u32 fbdv = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1));
+
+ u32 fwdva = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1));
+
+ u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8);
+
+ /* PLBDV0 is hardwared to 010. */
+ u32 plbdv0 = 2;
+ u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8);
+
+ u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4);
+
+ u32 perdv0 = __fix_zero((perd >> 24) & 3, 4);
+
+ /* Resulting clocks */
+ u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1;
+
+ /* PLL's VCO is the source for primary forward ? */
+ if (pllc & 0x40000000) {
+ u32 m;
+
+ /* Feedback path */
+ switch ((pllc >> 24) & 7) {
+ case 0:
+ /* PLLOUTx */
+ m = fbdv;
+ break;
+ case 1:
+ /* CPU */
+ m = fbdv * fwdva * cpudv0;
+ break;
+ case 5:
+ /* PERClk */
+ m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0;
+ break;
+ default:
+ printf("WARNING ! Invalid PLL feedback source !\n");
+ goto bypass;
+ }
+
+ vco = (unsigned int)(sys_clk * m);
+ } else {
+bypass:
+ /* Bypass system PLL */
+ vco = 0;
+ }
+
+ /* CPU = VCO / ( FWDVA x CPUDV0) */
+ cpu = vco / (fwdva * cpudv0);
+ /* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */
+ plb = vco / (fwdva * plb2xdv0 * plbdv0);
+ /* OPB = PLB / OPBDV0 */
+ opb = plb / opbdv0;
+ /* EBC = OPB / PERDV0 */
+ ebc = opb / perdv0;
+
+ tb = cpu;
+ uart0 = uart1 = uart_clk;
+
+ dt_fixup_cpu_clocks(cpu, tb, 0);
+ dt_fixup_clock("/plb", plb);
+ dt_fixup_clock("/plb/opb", opb);
+ dt_fixup_clock("/plb/opb/ebc", ebc);
+ dt_fixup_clock("/plb/opb/serial@ef600200", uart0);
+ dt_fixup_clock("/plb/opb/serial@ef600300", uart1);
+}
diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h
index 2606e64f0c4..7dc5d45361b 100644
--- a/arch/powerpc/boot/4xx.h
+++ b/arch/powerpc/boot/4xx.h
@@ -21,6 +21,7 @@ void ibm4xx_fixup_ebc_ranges(const char *ebc);
void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
void ibm405ep_fixup_clocks(unsigned int sys_clk);
+void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk);
void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
unsigned int tmr_clk);
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 9ae7b7e2ba7..7bfc8ad8779 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -39,6 +39,7 @@ DTS_FLAGS ?= -p 1024
$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
@@ -67,7 +68,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
fsl-soc.c mpc8xx.c pq2.c
src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
- cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
+ cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -75,7 +76,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
- cuboot-acadia.c cuboot-amigaone.c
+ cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -190,6 +191,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage
# Board ports in arch/powerpc/platform/40x/Kconfig
image-$(CONFIG_EP405) += dtbImage.ep405
+image-$(CONFIG_HOTFOOT) += cuImage.hotfoot
image-$(CONFIG_WALNUT) += treeImage.walnut
image-$(CONFIG_ACADIA) += cuImage.acadia
diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c
new file mode 100644
index 00000000000..8f697b958e4
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-hotfoot.c
@@ -0,0 +1,142 @@
+/*
+ * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board
+ *
+ * Author: Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_HOTFOOT
+
+#include "ppcboot-hotfoot.h"
+
+static bd_t bd;
+
+#define NUM_REGS 3
+
+static void hotfoot_fixups(void)
+{
+ u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f;
+
+ dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+
+ dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0);
+ dt_fixup_clock("/plb", bd.bi_plb_busfreq);
+ dt_fixup_clock("/plb/opb", bd.bi_opbfreq);
+ dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq);
+ dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart);
+ dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart);
+
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+
+ /* Is this a single eth/serial board? */
+ if ((bd.bi_enet1addr[0] == 0) &&
+ (bd.bi_enet1addr[1] == 0) &&
+ (bd.bi_enet1addr[2] == 0) &&
+ (bd.bi_enet1addr[3] == 0) &&
+ (bd.bi_enet1addr[4] == 0) &&
+ (bd.bi_enet1addr[5] == 0)) {
+ void *devp;
+
+ printf("Trimming devtree for single serial/eth board\n");
+
+ devp = finddevice("/plb/opb/serial@ef600300");
+ if (!devp)
+ fatal("Can't find node for /plb/opb/serial@ef600300");
+ del_node(devp);
+
+ devp = finddevice("/plb/opb/ethernet@ef600900");
+ if (!devp)
+ fatal("Can't find node for /plb/opb/ethernet@ef600900");
+ del_node(devp);
+ }
+
+ ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900);
+
+ /* Fix up flash size in fdt for 4M boards. */
+ if (bd.bi_flashsize < 0x800000) {
+ u32 regs[NUM_REGS];
+ void *devp = finddevice("/plb/ebc/nor_flash@0");
+ if (!devp)
+ fatal("Can't find FDT node for nor_flash!??");
+
+ printf("Fixing devtree for 4M Flash\n");
+
+ /* First fix up the base addresse */
+ getprop(devp, "reg", regs, sizeof(regs));
+ regs[0] = 0;
+ regs[1] = 0xffc00000;
+ regs[2] = 0x00400000;
+ setprop(devp, "reg", regs, sizeof(regs));
+
+ /* Then the offsets */
+ devp = finddevice("/plb/ebc/nor_flash@0/partition@0");
+ if (!devp)
+ fatal("Can't find FDT node for partition@0");
+ getprop(devp, "reg", regs, 2*sizeof(u32));
+ regs[0] -= 0x400000;
+ setprop(devp, "reg", regs, 2*sizeof(u32));
+
+ devp = finddevice("/plb/ebc/nor_flash@0/partition@1");
+ if (!devp)
+ fatal("Can't find FDT node for partition@1");
+ getprop(devp, "reg", regs, 2*sizeof(u32));
+ regs[0] -= 0x400000;
+ setprop(devp, "reg", regs, 2*sizeof(u32));
+
+ devp = finddevice("/plb/ebc/nor_flash@0/partition@2");
+ if (!devp)
+ fatal("Can't find FDT node for partition@2");
+ getprop(devp, "reg", regs, 2*sizeof(u32));
+ regs[0] -= 0x400000;
+ setprop(devp, "reg", regs, 2*sizeof(u32));
+
+ devp = finddevice("/plb/ebc/nor_flash@0/partition@3");
+ if (!devp)
+ fatal("Can't find FDT node for partition@3");
+ getprop(devp, "reg", regs, 2*sizeof(u32));
+ regs[0] -= 0x400000;
+ setprop(devp, "reg", regs, 2*sizeof(u32));
+
+ devp = finddevice("/plb/ebc/nor_flash@0/partition@4");
+ if (!devp)
+ fatal("Can't find FDT node for partition@4");
+ getprop(devp, "reg", regs, 2*sizeof(u32));
+ regs[0] -= 0x400000;
+ setprop(devp, "reg", regs, 2*sizeof(u32));
+
+ devp = finddevice("/plb/ebc/nor_flash@0/partition@6");
+ if (!devp)
+ fatal("Can't find FDT node for partition@6");
+ getprop(devp, "reg", regs, 2*sizeof(u32));
+ regs[0] -= 0x400000;
+ setprop(devp, "reg", regs, 2*sizeof(u32));
+
+ /* Delete the FeatFS node */
+ devp = finddevice("/plb/ebc/nor_flash@0/partition@5");
+ if (!devp)
+ fatal("Can't find FDT node for partition@5");
+ del_node(devp);
+ }
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+ platform_ops.fixups = hotfoot_fixups;
+ platform_ops.exit = ibm40x_dbcr_reset;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/cuboot-kilauea.c b/arch/powerpc/boot/cuboot-kilauea.c
new file mode 100644
index 00000000000..80cdad6bbc3
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-kilauea.c
@@ -0,0 +1,49 @@
+/*
+ * Old U-boot compatibility for PPC405EX. This image is already included
+ * a dtb.
+ *
+ * Author: Tiejun Chen <tiejun.chen@windriver.com>
+ *
+ * Copyright (C) 2009 Wind River Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "dcr.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+#define KILAUEA_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
+
+static bd_t bd;
+
+static void kilauea_fixups(void)
+{
+ unsigned long sysclk = 33333333;
+
+ ibm405ex_fixup_clocks(sysclk, KILAUEA_SYS_EXT_SERIAL_CLOCK);
+ dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+ ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+ platform_ops.fixups = kilauea_fixups;
+ platform_ops.exit = ibm40x_dbcr_reset;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index 95b9f534401..645a7c964e5 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -153,9 +153,7 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR,
#define DCRN_CPC0_PLLMR1 0xf4
#define DCRN_CPC0_UCR 0xf5
-/* 440GX Clock control etc */
-
-
+/* 440GX/405EX Clock Control reg */
#define DCRN_CPR0_CLKUPD 0x020
#define DCRN_CPR0_PLLC 0x040
#define DCRN_CPR0_PLLD 0x060
diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts
index d9113b1e8c1..414ef8b7e57 100644
--- a/arch/powerpc/boot/dts/arches.dts
+++ b/arch/powerpc/boot/dts/arches.dts
@@ -124,6 +124,16 @@
dcr-reg = <0x00c 0x002>;
};
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
plb {
compatible = "ibm,plb-460gt", "ibm,plb4";
#address-cells = <2>;
@@ -168,6 +178,38 @@
/* ranges property is supplied by U-Boot */
interrupts = <0x6 0x4>;
interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl256n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x00200000 0x00200000>;
+ };
+ partition@400000 {
+ label = "user";
+ reg = <0x00400000 0x01b60000>;
+ };
+ partition@1f60000 {
+ label = "env";
+ reg = <0x01f60000 0x00040000>;
+ };
+ partition@1fa0000 {
+ label = "u-boot";
+ reg = <0x01fa0000 0x00060000>;
+ };
+ };
};
UART0: serial@ef600300 {
@@ -186,6 +228,14 @@
reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sttm@4a {
+ compatible = "ad,ad7414";
+ reg = <0x4a>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x0 0x8>;
+ };
};
IIC1: i2c@ef600800 {
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 5fd1ad09bdf..c920170b7df 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for AMCC Canyonlands (460EX)
*
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
@@ -149,19 +149,19 @@
/*RXDE*/ 0x5 0x4>;
};
- USB0: ehci@bffd0400 {
- compatible = "ibm,usb-ehci-460ex", "usb-ehci";
- interrupt-parent = <&UIC2>;
- interrupts = <0x1d 4>;
- reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
- };
+ USB0: ehci@bffd0400 {
+ compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x1d 4>;
+ reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+ };
- USB1: usb@bffd0000 {
- compatible = "ohci-le";
- reg = <4 0xbffd0000 0x60>;
- interrupt-parent = <&UIC2>;
- interrupts = <0x1e 4>;
- };
+ USB1: usb@bffd0000 {
+ compatible = "ohci-le";
+ reg = <4 0xbffd0000 0x60>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x1e 4>;
+ };
POB0: opb {
compatible = "ibm,opb-460ex", "ibm,opb";
@@ -215,6 +215,29 @@
reg = <0x03fa0000 0x00060000>;
};
};
+
+ ndfc@3,0 {
+ compatible = "ibm,ndfc";
+ reg = <0x00000003 0x00000000 0x00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@100000 {
+ label = "user";
+ reg = <0x00000000 0x03f00000>;
+ };
+ };
+ };
};
UART0: serial@ef600300 {
diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts
new file mode 100644
index 00000000000..c4a934f2e88
--- /dev/null
+++ b/arch/powerpc/boot/dts/eiger.dts
@@ -0,0 +1,421 @@
+/*
+ * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX)
+ *
+ * Copyright 2009 AMCC (AppliedMicro) <ttnguyen@amcc.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,eiger";
+ compatible = "amcc,eiger";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ ethernet3 = &EMAC3;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460SX";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460sx";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460sx";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460sx", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
+ dcr-reg = <0x180 0x62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <32>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&UIC1>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x1 0x4
+ /*TXDE*/ 0x2 0x4
+ /*RXDE*/ 0x3 0x4
+ /*COAL TX0*/ 0x18 0x2
+ /*COAL TX1*/ 0x19 0x2
+ /*COAL TX2*/ 0x1a 0x2
+ /*COAL TX3*/ 0x1b 0x2
+ /*COAL RX0*/ 0x1c 0x2
+ /*COAL RX1*/ 0x1d 0x2
+ /*COAL RX2*/ 0x1e 0x2
+ /*COAL RX3*/ 0x1f 0x2>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460sx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460sx", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ /* reg property is supplied in by U-Boot */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "ramdisk";
+ reg = <0x00200000 0x01400000>;
+ };
+ partition@1600000 {
+ label = "jffs2";
+ reg = <0x01600000 0x00400000>;
+ };
+ partition@1a00000 {
+ label = "user";
+ reg = <0x01a00000 0x02560000>;
+ };
+ partition@3f60000 {
+ label = "env";
+ reg = <0x03f60000 0x00040000>;
+ };
+ partition@3fa0000 {
+ label = "u-boot";
+ reg = <0x03fa0000 0x00060000>;
+ };
+ };
+
+ ndfc@1,0 {
+ compatible = "ibm,ndfc";
+ /* reg property is supplied by U-boot */
+ ccr = <0x00003000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@200000 {
+ label = "uboot-environment";
+ reg = <0x00200000 0x00100000>;
+ };
+ partition@300000 {
+ label = "linux";
+ reg = <0x00300000 0x00300000>;
+ };
+ partition@600000 {
+ label = "root-file-system";
+ reg = <0x00600000 0x01900000>;
+ };
+ partition@1f00000 {
+ label = "device-tree";
+ reg = <0x01f00000 0x00020000>;
+ };
+ partition@1f20000 {
+ label = "data";
+ reg = <0x01f20000 0x060E0000>;
+ };
+ };
+ };
+ };
+
+ UART0: serial@ef600200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x0 0x4>;
+ };
+
+ UART1: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+ IIC0: i2c@ef600400 {
+ compatible = "ibm,iic-460sx", "ibm,iic";
+ reg = <0xef600400 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ index = <0>;
+ };
+
+ IIC1: i2c@ef600500 {
+ compatible = "ibm,iic-460sx", "ibm,iic";
+ reg = <0xef600500 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ index = <1>;
+ };
+
+ RGMII0: emac-rgmii@ef600900 {
+ compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+ reg = <0xef600900 0x00000008>;
+ has-mdio;
+ };
+
+ RGMII1: emac-rgmii@ef600920 {
+ compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+ reg = <0xef600920 0x00000008>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef600e50 {
+ compatible = "ibm,tah-460sx", "ibm,tah";
+ reg = <0xef600e50 0x00000030>;
+ };
+
+ TAH1: emac-tah@ef600f50 {
+ compatible = "ibm,tah-460sx", "ibm,tah";
+ reg = <0xef600f50 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600a00 {
+ device_type = "network";
+ compatible = "ibm,emac-460sx", "ibm,emac4";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
+ /*Wake*/ 0x1 &UIC2 0x1d 0x4>;
+ reg = <0xef600a00 0x00000070>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600b00 {
+ device_type = "network";
+ compatible = "ibm,emac-460sx", "ibm,emac4";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4
+ /*Wake*/ 0x1 &UIC2 0x1d 0x4>;
+ reg = <0xef600b00 0x00000070>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC2: ethernet@ef600c00 {
+ device_type = "network";
+ compatible = "ibm,emac-460sx", "ibm,emac4";
+ interrupt-parent = <&EMAC2>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x15 0x4
+ /*Wake*/ 0x1 &UIC2 0x1d 0x4>;
+ reg = <0xef600c00 0x00000070>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <16>;
+ cell-index = <2>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC3: ethernet@ef600d00 {
+ device_type = "network";
+ compatible = "ibm,emac-460sx", "ibm,emac4";
+ interrupt-parent = <&EMAC3>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x16 0x4
+ /*Wake*/ 0x1 &UIC2 0x1d 0x4>;
+ reg = <0xef600d00 0x00000070>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <3>;
+ mal-rx-channel = <24>;
+ cell-index = <3>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ };
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600200";
+ };
+
+};
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 0f4c9ec2c3a..2107d3c7cfe 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -83,34 +83,34 @@
/* flash@0,0 is a mirror of part of the memory in flash@1,0
flash@0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x01000000>;
+ compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
+ reg = <0x0 0x0 0x01000000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "firmware";
- reg = <0x00000000 0x01000000>;
+ reg = <0x0 0x01000000>;
read-only;
};
};
*/
flash@1,0 {
- compatible = "cfi-flash";
- reg = <1 0 0x8000000>;
+ compatible = "gef,sbc310-paged-flash", "cfi-flash";
+ reg = <0x1 0x0 0x8000000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "user";
- reg = <0x00000000 0x07800000>;
+ reg = <0x0 0x7800000>;
};
partition@7800000 {
label = "firmware";
- reg = <0x07800000 0x00800000>;
+ reg = <0x7800000 0x800000>;
read-only;
};
};
@@ -121,18 +121,16 @@
};
wdt@4,2000 {
- #interrupt-cells = <2>;
- device_type = "watchdog";
- compatible = "gef,fpga-wdt";
+ compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
reg = <0x4 0x2000 0x8>;
interrupts = <0x1a 0x4>;
interrupt-parent = <&gef_pic>;
};
/*
wdt@4,2010 {
- #interrupt-cells = <2>;
- device_type = "watchdog";
- compatible = "gef,fpga-wdt";
+ compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
reg = <0x4 0x2010 0x8>;
interrupts = <0x1b 0x4>;
interrupt-parent = <&gef_pic>;
@@ -141,7 +139,7 @@
gef_pic: pic@4,4000 {
#interrupt-cells = <1>;
interrupt-controller;
- compatible = "gef,fpga-pic";
+ compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
reg = <0x4 0x4000 0x20>;
interrupts = <0x8
0x9>;
@@ -161,7 +159,7 @@
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
- compatible = "simple-bus";
+ compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
bus-frequency = <33333333>;
@@ -376,4 +374,40 @@
0x0 0x00400000>;
};
};
+
+ pci1: pcie@fef09000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xfef09000 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x19 0x2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
+ 0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
+ 0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
+ 0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xc0000000
+ 0x02000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00400000>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts
new file mode 100644
index 00000000000..cad9c3840af
--- /dev/null
+++ b/arch/powerpc/boot/dts/hotfoot.dts
@@ -0,0 +1,294 @@
+/*
+ * Device Tree Source for ESTeem 195E Hotfoot
+ *
+ * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "est,hotfoot";
+ compatible = "est,hotfoot";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,405EP";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ timebase-frequency = <0>; /* Filled in by zImage */
+ i-cache-line-size = <0x20>;
+ d-cache-line-size = <0x20>;
+ i-cache-size = <0x4000>;
+ d-cache-size = <0x4000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
+ };
+
+ UIC0: interrupt-controller {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ plb {
+ compatible = "ibm,plb3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ SDRAM0: memory-controller {
+ compatible = "ibm,sdram-405ep";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ MAL: mcmal {
+ compatible = "ibm,mcmal-405ep", "ibm,mcmal";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <4>;
+ num-rx-chans = <2>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <
+ 0xb 0x4 /* TXEOB */
+ 0xc 0x4 /* RXEOB */
+ 0xa 0x4 /* SERR */
+ 0xd 0x4 /* TXDE */
+ 0xe 0x4 /* RXDE */>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-405ep", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xef600000 0xef600000 0x00a00000>;
+ dcr-reg = <0x0a0 0x005>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ /* Hotfoot has UART0/UART1 swapped */
+
+ UART0: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <0x9600>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+ UART1: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <0x9600>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x0 0x4>;
+ };
+
+ IIC: i2c@ef600500 {
+ compatible = "ibm,iic-405ep", "ibm,iic";
+ reg = <0xef600500 0x00000011>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+
+ rtc@68 {
+ /* Actually a DS1339 */
+ compatible = "dallas,ds1307";
+ reg = <0x68>;
+ };
+
+ temp@4a {
+ /* Not present on all boards */
+ compatible = "national,lm75";
+ reg = <0x4a>;
+ };
+ };
+
+ GPIO: gpio@ef600700 {
+ #gpio-cells = <2>;
+ compatible = "ibm,ppc4xx-gpio";
+ reg = <0xef600700 0x00000020>;
+ gpio-controller;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ status {
+ label = "Status";
+ gpios = <&GPIO 1 0>;
+ };
+ radiorx {
+ label = "Rx";
+ gpios = <&GPIO 0xe 0>;
+ };
+ };
+
+ EMAC0: ethernet@ef600800 {
+ linux,network-index = <0x0>;
+ device_type = "network";
+ compatible = "ibm,emac-405ep", "ibm,emac";
+ interrupt-parent = <&UIC0>;
+ interrupts = <
+ 0xf 0x4 /* Ethernet */
+ 0x9 0x4 /* Ethernet Wake Up */>;
+ local-mac-address = [000000000000]; /* Filled in by zImage */
+ reg = <0xef600800 0x00000070>;
+ mal-device = <&MAL>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <0x5dc>;
+ rx-fifo-size = <0x1000>;
+ tx-fifo-size = <0x800>;
+ phy-mode = "mii";
+ phy-map = <0x00000000>;
+ };
+
+ EMAC1: ethernet@ef600900 {
+ linux,network-index = <0x1>;
+ device_type = "network";
+ compatible = "ibm,emac-405ep", "ibm,emac";
+ interrupt-parent = <&UIC0>;
+ interrupts = <
+ 0x11 0x4 /* Ethernet */
+ 0x9 0x4 /* Ethernet Wake Up */>;
+ local-mac-address = [000000000000]; /* Filled in by zImage */
+ reg = <0xef600900 0x00000070>;
+ mal-device = <&MAL>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <1>;
+ cell-index = <1>;
+ max-frame-size = <0x5dc>;
+ rx-fifo-size = <0x1000>;
+ tx-fifo-size = <0x800>;
+ mdio-device = <&EMAC0>;
+ phy-mode = "mii";
+ phy-map = <0x0000001>;
+ };
+ };
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-405ep", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ /* The ranges property is supplied by the bootwrapper
+ * and is based on the firmware's configuration of the
+ * EBC bridge
+ */
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ nor_flash@0 {
+ compatible = "cfi-flash";
+ bank-width = <2>;
+ reg = <0x0 0xff800000 0x00800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* This mapping is for the 8M flash
+ 4M flash has all ofssets -= 4M,
+ and FeatFS partition is not present */
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x7c0000 0x40000>;
+ /* read-only; */
+ };
+ partition@1 {
+ label = "Env_and_Config_Primary";
+ reg = <0x400000 0x10000>;
+ };
+ partition@2 {
+ label = "Kernel";
+ reg = <0x420000 0x100000>;
+ };
+ partition@3 {
+ label = "Filesystem";
+ reg = <0x520000 0x2a0000>;
+ };
+ partition@4 {
+ label = "Env_and_Config_Secondary";
+ reg = <0x410000 0x10000>;
+ };
+ partition@5 {
+ label = "FeatFS";
+ reg = <0x000000 0x400000>;
+ };
+ partition@6 {
+ label = "Bootloader_Env";
+ reg = <0x7d0000 0x10000>;
+ };
+ };
+ };
+
+ PCI0: pci@ec000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
+ primary;
+ reg = <0xeec00000 0x00000008 /* Config space access */
+ 0xeed80000 0x00000004 /* IACK */
+ 0xeed80000 0x00000004 /* Special cycle */
+ 0xef480000 0x00000040>; /* Internal registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed. Chip supports a second
+ * IO range but we don't use it for now
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+ interrupt-parent = <&UIC0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
+ 0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
+ 0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
+
+ /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
+ 0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
+ 0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
+ >;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = &UART0;
+ };
+};
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 5e6b08ff6f6..c46561456ed 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for AMCC Kilauea (405EX)
*
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
@@ -150,7 +150,11 @@
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0x00000000 0x00200000>;
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
};
partition@200000 {
label = "root";
@@ -169,6 +173,29 @@
reg = <0x03fa0000 0x00060000>;
};
};
+
+ ndfc@1,0 {
+ compatible = "ibm,ndfc";
+ reg = <0x00000001 0x00000000 0x00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@100000 {
+ label = "user";
+ reg = <0x00000000 0x03f00000>;
+ };
+ };
+ };
};
UART0: serial@ef600200 {
@@ -198,6 +225,18 @@
reg = <0xef600400 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+
+ dtt@48 {
+ compatible = "dallas,ds1775";
+ reg = <0x48>;
+ };
};
IIC1: i2c@ef600500 {
@@ -207,7 +246,6 @@
interrupts = <0x7 0x4>;
};
-
RGMII0: emac-rgmii@ef600b00 {
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
reg = <0xef600b00 0x00000104>;
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index 633255a9755..0ce96644176 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -162,6 +162,59 @@
fixed-link = <0 0 10 0 0>;
};
+ i2c@11860 {
+ compatible = "fsl,mpc8272-i2c",
+ "fsl,cpm2-i2c";
+ reg = <0x11860 0x20 0x8afc 0x2>;
+ interrupts = <1 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-command = <0x29600000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@10d40 {
+ compatible = "fsl,cpm2-mdio-bitbang";
+ reg = <0x10d00 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fsl,mdio-pin = <12>;
+ fsl,mdc-pin = <13>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ /* FCC1 management to switch */
+ ethernet@11300 {
+ device_type = "network";
+ compatible = "fsl,cpm2-fcc-enet";
+ reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+ local-mac-address = [ 00 01 02 03 04 07 ];
+ interrupts = <32 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy0>;
+ linux,network-index = <1>;
+ fsl,cpm-command = <0x12000300>;
+ };
+
+ /* FCC2 to redundant core unit over backplane */
+ ethernet@11320 {
+ device_type = "network";
+ compatible = "fsl,cpm2-fcc-enet";
+ reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+ local-mac-address = [ 00 01 02 03 04 08 ];
+ interrupts = <33 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy1>;
+ linux,network-index = <2>;
+ fsl,cpm-command = <0x16200300>;
+ };
};
PIC: interrupt-controller@10c00 {
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 60f332778e4..e802ebd88cb 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -173,6 +173,14 @@
fsl,cpm-command = <0xce00000>;
};
+ usb@11b60 {
+ compatible = "fsl,mpc8272-cpm-usb";
+ reg = <0x11b60 0x40 0x8b00 0x100>;
+ interrupts = <11 8>;
+ interrupt-parent = <&PIC>;
+ mode = "peripheral";
+ };
+
mdio@10d40 {
device_type = "mdio";
compatible = "fsl,mpc8272ads-mdio-bitbang",
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 4f06dbc0d27..28e022ac417 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -174,7 +174,7 @@
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
- clock-frequency = <0>;
+ clock-frequency = <111111111>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
new file mode 100644
index 00000000000..3febc4e91b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -0,0 +1,464 @@
+/*
+ * MPC8377E WLAN Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ * Copyright 2009 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "fsl,mpc8377wlan";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8377@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; // 512MB at 0
+ };
+
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+ ranges = <0x0 0x0 0xfc000000 0x04000000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x4000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ reg = <0 0x8000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@a0000 {
+ reg = <0xa0000 0x300000>;
+ label = "kernel";
+ };
+
+ partition@3a0000 {
+ reg = <0x3a0000 0x3c60000>;
+ label = "rootfs";
+ };
+ };
+ };
+
+ immr@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ gpio1: gpio-controller@c00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+ reg = <0xc00 0x100>;
+ interrupts = <74 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ gpio2: gpio-controller@d00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+ reg = <0xd00 0x100>;
+ interrupts = <75 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x0c000000>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ at24@50 {
+ compatible = "at24,24c256";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <133333333>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <15 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x7000 0x1000>;
+ interrupts = <16 0x8>;
+ interrupt-parent = <&ipic>;
+ mode = "cpu";
+ };
+
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ cell-index = <3>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
+ usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <38 0x8>;
+ phy_type = "ulpi";
+ sleep = <&pmc 0x00c00000>;
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <32 0x8 33 0x8 34 0x8>;
+ phy-connection-type = "mii";
+ interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy2>;
+ sleep = <&pmc 0xc0000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 0x8 36 0x8 37 0x8>;
+ phy-connection-type = "mii";
+ interrupt-parent = <&ipic>;
+ phy-handle = <&phy3>;
+ tbi-handle = <&tbi1>;
+ sleep = <&pmc 0x30000000>;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <9 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <10 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ sleep = <&pmc 0x03000000>;
+ };
+
+ sata@18000 {
+ compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ interrupts = <44 0x8>;
+ interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x000000c0>;
+ };
+
+ sata@19000 {
+ compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ interrupts = <45 0x8>;
+ interrupt-parent = <&ipic>;
+ sleep = <&pmc 0x00000030>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: interrupt-controller@700 {
+ compatible = "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ };
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
+
+ pci0: pci@e0008500 {
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+ /* IDSEL AD14 IRQ6 inta */
+ 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+ /* IDSEL AD15 IRQ5 inta */
+ 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 0x8>;
+ bus-range = <0 0>;
+ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+ sleep = <&pmc 0x00010000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ sleep = <&pmc 0x00300000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa8000000
+ 0x02000000 0 0xa8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ sleep = <&pmc 0x000c0000>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xc8000000
+ 0x02000000 0 0xc8000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index aabf3437cad..a11ead8214b 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -174,7 +174,7 @@
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
- clock-frequency = <0>;
+ clock-frequency = <111111111>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 9b1da864d89..e35dfba587c 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -172,7 +172,7 @@
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
- clock-frequency = <0>;
+ clock-frequency = <111111111>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index e781ad2f1f8..815cebb2e3e 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -14,8 +14,8 @@
/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
aliases {
ethernet0 = &enet0;
@@ -42,7 +42,7 @@
memory {
device_type = "memory";
- reg = <00000000 00000000>; // Filled by U-Boot
+ reg = <0 0 0 0>; // Filled by U-Boot
};
soc@ffe00000 {
@@ -50,7 +50,7 @@
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
+ ranges = <0x0 0 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
@@ -250,6 +250,14 @@
phy_type = "ulpi";
};
+ sdhci@2e000 {
+ compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <250000000>;
+ };
+
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
@@ -347,13 +355,13 @@
interrupt-parent = <&mpic>;
interrupts = <24 0x2>;
bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000
- 0x01000000 0 0x00000000 0xffc00000 0 0x00010000>;
+ ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+ 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xffe08000 0x1000>;
+ reg = <0 0xffe08000 0 0x1000>;
};
pci1: pcie@ffe09000 {
@@ -362,10 +370,10 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xffe09000 0x1000>;
+ reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000
- 0x01000000 0 0x00000000 0xffc20000 0 0x00010000>;
+ ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
+ 0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 0x2>;
@@ -398,10 +406,10 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xffe0a000 0x1000>;
+ reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000
- 0x01000000 0 0x00000000 0xffc10000 0 0x00010000>;
+ ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
+ 0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 0x2>;
@@ -434,10 +442,10 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xffe0b000 0x1000>;
+ reg = <0 0xffe0b000 0 0x1000>;
bus-range = <0 0xff>;
- ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
- 0x01000000 0 0x00000000 0xffc30000 0 0x00010000>;
+ ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+ 0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <27 0x2>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
new file mode 100644
index 00000000000..d95b26021e6
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -0,0 +1,475 @@
+/*
+ * MPC8536 DS Device Tree Source
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "fsl,mpc8536ds";
+ compatible = "fsl,mpc8536ds";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8536@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0 0>; // Filled by U-Boot
+ };
+
+ soc@fffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8536-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 0x2>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8536-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 0x2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0 0x1>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
+ reg = <0x21300 4>;
+ ranges = <0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8536-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8536-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8536-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8536-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ usb@22000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <46 0x2>;
+ phy_type = "ulpi";
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 0x1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 0x1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ usb@2b000 {
+ compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+ reg = <0x2b000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <60 0x2>;
+ dr_mode = "peripheral";
+ phy_type = "ulpi";
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <250000000>;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ sata@18000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <74 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ sata@19000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <41 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+
+ msi@41600 {
+ compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ pci0: pci@fffe08000 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 J17 Slot 1 */
+ 0x8800 0 0 1 &mpic 1 1
+ 0x8800 0 0 2 &mpic 2 1
+ 0x8800 0 0 3 &mpic 3 1
+ 0x8800 0 0 4 &mpic 4 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <24 0x2>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xffe08000 0 0x1000>;
+ };
+
+ pci1: pcie@fffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xffe09000 0 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
+ 0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 0x2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 4 1
+ 0000 0 0 2 &mpic 5 1
+ 0000 0 0 3 &mpic 6 1
+ 0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xf8000000
+ 0x02000000 0 0xf8000000
+ 0 0x08000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@fffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
+ 0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <26 0x2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 0 1
+ 0000 0 0 2 &mpic 1 1
+ 0000 0 0 3 &mpic 2 1
+ 0000 0 0 4 &mpic 3 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xf8000000
+ 0x02000000 0 0xf8000000
+ 0 0x08000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci3: pcie@fffe0b000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xffe0b000 0 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <27 0x2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 8 1
+ 0000 0 0 2 &mpic 9 1
+ 0000 0 0 3 &mpic 10 1
+ 0000 0 0 4 &mpic 11 1
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00100000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 475be1433fe..4173af387c6 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -100,6 +100,21 @@
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
};
i2c@3100 {
@@ -111,6 +126,11 @@
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
dma@21300 {
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 9e4ce99e161..06332d61830 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -99,8 +99,18 @@
};
bcsr@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,mpc8569mds-bcsr";
reg = <1 0 0x8000>;
+ ranges = <0 1 0 0x8000>;
+
+ bcsr17: gpio-controller@11 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8569mds-bcsr-gpio";
+ reg = <0x11 0x1>;
+ gpio-controller;
+ };
};
nand@3,0 {
@@ -315,6 +325,14 @@
gpio-controller;
};
+ qe_pio_f: gpio-controller@a0 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8569-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0xa0 0x18>;
+ gpio-controller;
+ };
+
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
@@ -419,6 +437,16 @@
interrupt-parent = <&mpic>;
};
+ timer@440 {
+ compatible = "fsl,mpc8569-qe-gtm",
+ "fsl,qe-gtm", "fsl,gtm";
+ reg = <0x440 0x40>;
+ interrupts = <12 13 14 15>;
+ interrupt-parent = <&qeic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
spi@4c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -446,6 +474,23 @@
mode = "cpu";
};
+ usb@6c0 {
+ compatible = "fsl,mpc8569-qe-usb",
+ "fsl,mpc8323-qe-usb";
+ reg = <0x6c0 0x40 0x8b00 0x100>;
+ interrupts = <11>;
+ interrupt-parent = <&qeic>;
+ fsl,fullspeed-clock = "clk5";
+ fsl,lowspeed-clock = "brg10";
+ gpios = <&qe_pio_f 3 0 /* USBOE */
+ &qe_pio_f 4 0 /* USBTP */
+ &qe_pio_f 5 0 /* USBTN */
+ &qe_pio_f 6 0 /* USBRP */
+ &qe_pio_f 8 0 /* USBRN */
+ &bcsr17 6 0 /* SPEED */
+ &bcsr17 5 1>; /* POWER */
+ };
+
enet0: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
new file mode 100644
index 00000000000..da4cb0d8d21
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -0,0 +1,586 @@
+/*
+ * P2020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P2020";
+ compatible = "fsl,P2020RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P2020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ /* NOR and NAND Flashes */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR (RO) DTB Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR (RW) JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR (RO) U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND (RW) Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p2020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p2020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ mode = "cpu";
+
+ fsl_m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ modal = "s25sl128b";
+ spi-max-frequency = <50000000>;
+ mode = <0>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI (RO) DTB Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI (RW) JFFS2 RFS";
+ };
+ };
+ };
+
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ gpio: gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ phy_type = "ulpi";
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x1>;
+ };
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "sgmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi@41600 {
+ compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 2d9fa68f641..0dc90f9bd81 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -146,18 +146,6 @@
phy_type = "ulpi";
port0;
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
- usb@23000 {
- device_type = "usb";
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <38 0x8>;
- dr_mode = "otg";
- phy_type = "ulpi";
- };
enet0: ethernet@24000 {
#address-cells = <1>;
@@ -277,15 +265,55 @@
};
};
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-localbus", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+ ranges = <0x0 0x0 0xff800000 0x00800000 /* 8MB Flash */
+ 0x1 0x0 0xf8000000 0x00002000 /* 8KB EEPROM */
+ 0x2 0x0 0x10000000 0x04000000 /* 64MB SDRAM */
+ 0x3 0x0 0x10000000 0x04000000>; /* 64MB SDRAM */
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,28F640J3A", "cfi-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x006c0000>;
+ };
+
+ partition@700000 {
+ label = "legacy u-boot";
+ reg = <0x00700000 0x00100000>;
+ read-only;
+ };
+
+ };
+ };
+
pci0: pci@e0008500 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
- 0x8800 0x0 0x0 0x1 &ipic 20 0x8
- 0x8800 0x0 0x0 0x2 &ipic 21 0x8
- 0x8800 0x0 0x0 0x3 &ipic 22 0x8
- 0x8800 0x0 0x0 0x4 &ipic 23 0x8>;
+ 0x8800 0x0 0x0 0x1 &ipic 48 0x8
+ 0x8800 0x0 0x0 0x2 &ipic 17 0x8
+ 0x8800 0x0 0x0 0x3 &ipic 18 0x8
+ 0x8800 0x0 0x0 0x4 &ipic 19 0x8>;
interrupt-parent = <&ipic>;
interrupts = <0x42 0x8>;
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 239d57a55cf..9e13ed8a119 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -303,7 +303,6 @@
global-utilities@e0000 {
compatible = "fsl,mpc8560-guts";
reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
};
diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
index c2baae0a3d8..e2ae24340fc 100644
--- a/arch/powerpc/boot/mktree.c
+++ b/arch/powerpc/boot/mktree.c
@@ -36,7 +36,7 @@ typedef struct boot_block {
} boot_block_t;
#define IMGBLK 512
-char tmpbuf[IMGBLK];
+unsigned int tmpbuf[IMGBLK / sizeof(unsigned int)];
int main(int argc, char *argv[])
{
@@ -95,13 +95,13 @@ int main(int argc, char *argv[])
/* Assume zImage is an ELF file, and skip the 64K header.
*/
- if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
+ if (read(in_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
fprintf(stderr, "%s is too small to be an ELF image\n",
argv[1]);
exit(4);
}
- if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
+ if (tmpbuf[0] != htonl(0x7f454c46)) {
fprintf(stderr, "%s is not an ELF image\n", argv[1]);
exit(4);
}
@@ -121,11 +121,11 @@ int main(int argc, char *argv[])
}
while (nblks-- > 0) {
- if (read(in_fd, tmpbuf, IMGBLK) < 0) {
+ if (read(in_fd, tmpbuf, sizeof(tmpbuf)) < 0) {
perror("zImage read");
exit(5);
}
- cp = (unsigned int *)tmpbuf;
+ cp = tmpbuf;
for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
cksum += *cp++;
if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
diff --git a/arch/powerpc/boot/ppcboot-hotfoot.h b/arch/powerpc/boot/ppcboot-hotfoot.h
new file mode 100644
index 00000000000..1a3e80b533d
--- /dev/null
+++ b/arch/powerpc/boot/ppcboot-hotfoot.h
@@ -0,0 +1,133 @@
+/*
+ * This interface is used for compatibility with old U-boots *ONLY*.
+ * Please do not imitate or extend this.
+ */
+
+/*
+ * Unfortunately, the ESTeem Hotfoot board uses a mangled version of
+ * ppcboot.h for historical reasons, and in the interest of having a
+ * mainline kernel boot on the production board+bootloader, this was the
+ * least-offensive solution. Please direct all flames to:
+ *
+ * Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * (This header is identical to ppcboot.h except for the
+ * TARGET_HOTFOOT bits)
+ */
+
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PPCBOOT_H__
+#define __PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#include "types.h"
+
+typedef struct bd_info {
+ unsigned long bi_memstart; /* start of DRAM memory */
+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+ unsigned long bi_sramstart; /* start of SRAM memory */
+ unsigned long bi_sramsize; /* size of SRAM memory */
+#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
+ defined(TARGET_83xx)
+ unsigned long bi_immr_base; /* base of IMMR register */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+ unsigned long bi_mbar_base; /* base of internal registers */
+#endif
+ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet address */
+#if defined(TARGET_HOTFOOT)
+ /* second onboard ethernet port */
+ unsigned char bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif /* TARGET_HOOTFOOT */
+ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
+ unsigned long bi_intfreq; /* Internal Freq, in MHz */
+ unsigned long bi_busfreq; /* Bus Freq, in MHz */
+#if defined(TARGET_CPM2)
+ unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
+ unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
+ unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
+ unsigned long bi_vco; /* VCO Out from PLL, in MHz */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+ unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
+ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
+#endif
+ unsigned long bi_baudrate; /* Console Baudrate */
+#if defined(TARGET_4xx)
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */
+ unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
+ unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
+#endif
+#if defined(TARGET_HOTFOOT)
+ unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */
+#endif
+#if defined(TARGET_HYMOD)
+ hymod_conf_t bi_hymod_conf; /* hymod configuration information */
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
+ defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1)
+ /* second onboard ethernet port */
+ unsigned char bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \
+ defined(TARGET_85xx) || defined(TARGET_HAS_ETH2)
+ /* third onboard ethernet ports */
+ unsigned char bi_enet2addr[6];
+#define HAVE_ENET2ADDR
+#endif
+#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3)
+ /* fourth onboard ethernet ports */
+ unsigned char bi_enet3addr[6];
+#define HAVE_ENET3ADDR
+#endif
+#if defined(TARGET_HOTFOOT)
+ int bi_phynum[2]; /* Determines phy mapping */
+ int bi_phymode[2]; /* Determines phy mode */
+#endif
+#if defined(TARGET_4xx)
+ unsigned int bi_opbfreq; /* OB clock in Hz */
+ int bi_iic_fast[2]; /* Use fast i2c mode */
+#endif
+#if defined(TARGET_440GX)
+ int bi_phynum[4]; /* phy mapping */
+ int bi_phymode[4]; /* phy mode */
+#endif
+} bd_t;
+
+#define bi_tbfreq bi_intfreq
+
+#endif /* __PPCBOOT_H__ */
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 4db487d1d2a..ac9e9a58b2b 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -46,6 +46,7 @@ CROSS=
# directory for object and other files used by this script
object=arch/powerpc/boot
objbin=$object
+dtc=scripts/dtc/dtc
# directory for working files
tmpdir=.
@@ -124,7 +125,7 @@ if [ -n "$dts" ]; then
if [ -z "$dtb" ]; then
dtb="$platform.dtb"
fi
- $object/dtc -O dtb -o "$dtb" -b 0 "$dts"
+ $dtc -O dtb -o "$dtb" -b 0 "$dts"
fi
if [ -z "$kernel" ]; then
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 865725effe9..9a05ec0ec31 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Wed Jun 3 10:18:16 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 13:28:37 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
@@ -32,11 +32,11 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -57,6 +57,7 @@ CONFIG_PPC_DCR_NATIVE=y
CONFIG_PPC_DCR=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -108,7 +109,6 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -121,9 +121,16 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -137,6 +144,11 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -149,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -220,6 +232,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +252,9 @@ CONFIG_MIGRATION=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -344,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -393,9 +407,8 @@ CONFIG_MTD_OF_PARTS=y
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
@@ -452,7 +465,17 @@ CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
#
@@ -465,6 +488,7 @@ CONFIG_MTD_PHYSMAP_OF=y
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -504,14 +528,17 @@ CONFIG_HAVE_IDE=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -546,6 +573,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -621,20 +649,150 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -649,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -691,10 +840,69 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -708,11 +916,12 @@ CONFIG_EXT2_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -818,6 +1027,7 @@ CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -848,6 +1058,9 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -859,7 +1072,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -873,16 +1085,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -891,6 +1102,9 @@ CONFIG_TRACING_SUPPORT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index f7fd32c0942..6f976b51cdd 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:31 2009
+# Linux kernel version: 2.6.31-rc5
+# Thu Aug 13 14:14:07 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -71,9 +75,19 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
@@ -84,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -95,23 +113,30 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -119,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -130,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,11 +177,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
@@ -172,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
CONFIG_ARCHES=y
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
@@ -214,6 +240,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -233,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
@@ -261,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -278,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -335,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -347,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -371,8 +402,92 @@ CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -412,7 +527,11 @@ CONFIG_HAVE_IDE=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -433,6 +552,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
@@ -451,6 +572,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -461,7 +583,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -533,13 +654,143 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+CONFIG_SENSORS_AD7414=y
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
@@ -556,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -600,7 +842,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -614,11 +861,12 @@ CONFIG_EXT2_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -628,6 +876,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -660,6 +913,17 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -670,6 +934,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -681,7 +946,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -697,6 +961,7 @@ CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -711,11 +976,14 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -733,6 +1001,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -743,6 +1014,9 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -754,7 +1028,6 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -762,27 +1035,36 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 5e85412eb9f..b312b166be6 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Mon Feb 2 13:13:04 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 17:27:20 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -71,6 +75,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
@@ -93,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -104,23 +113,30 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -139,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -176,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_ARCHES is not set
CONFIG_CANYONLANDS=y
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
@@ -218,6 +240,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -237,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
@@ -265,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -282,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -339,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -351,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -375,7 +402,101 @@ CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
@@ -418,7 +539,11 @@ CONFIG_HAVE_IDE=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -439,6 +564,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
@@ -457,6 +584,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -467,7 +595,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -542,7 +669,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -608,14 +734,17 @@ CONFIG_I2C_IBM_IIC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -640,6 +769,7 @@ CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -654,11 +784,14 @@ CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -666,6 +799,7 @@ CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -700,24 +834,9 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -759,6 +878,7 @@ CONFIG_USB_MON=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -767,9 +887,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -789,11 +909,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_LIBUSUAL=y
@@ -821,7 +941,6 @@ CONFIG_USB_LIBUSUAL=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -837,6 +956,7 @@ CONFIG_USB_LIBUSUAL=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -844,9 +964,70 @@ CONFIG_USB_LIBUSUAL=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -860,11 +1041,12 @@ CONFIG_EXT2_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -874,6 +1056,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -906,6 +1093,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -916,6 +1104,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -927,7 +1116,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -941,8 +1129,48 @@ CONFIG_SUNRPC=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -957,11 +1185,13 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -979,6 +1209,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -989,6 +1222,9 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1000,7 +1236,6 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1008,27 +1243,36 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
new file mode 100644
index 00000000000..007f3bd939e
--- /dev/null
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -0,0 +1,1252 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Wed Aug 19 13:06:50 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+CONFIG_EIGER=y
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_460SX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=y
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+# CONFIG_I2O_CONFIG is not set
+# CONFIG_I2O_BUS is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index a592b5efdc4..3a68f861b1b 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:13 2009
+# Linux kernel version: 2.6.31-rc5
+# Tue Aug 11 19:57:51 2009
#
# CONFIG_PPC64 is not set
@@ -420,7 +420,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@@ -436,6 +519,7 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
@@ -468,9 +552,38 @@ CONFIG_HAVE_IDE=y
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -578,11 +691,21 @@ CONFIG_GIANFAR=y
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -633,9 +756,9 @@ CONFIG_DEVKMEM=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -700,6 +823,7 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
@@ -814,6 +938,11 @@ CONFIG_WATCHDOG=y
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
@@ -856,12 +985,134 @@ CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set
#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
# Special HID drivers
#
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -882,9 +1133,14 @@ CONFIG_HID=y
#
# File systems
#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@@ -940,6 +1196,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -977,7 +1234,46 @@ CONFIG_RPCSEC_GSS_KRB5=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index e9491c1c3f3..30b68bfaceb 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:51 2009
+# Linux kernel version: 2.6.31-rc5
+# Fri Aug 7 08:19:15 2009
#
# CONFIG_PPC64 is not set
@@ -158,6 +158,7 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
@@ -506,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -582,7 +584,8 @@ CONFIG_PHYLIB=y
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_MACE is not set
@@ -608,8 +611,8 @@ CONFIG_MII=y
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
-# CONFIG_FS_ENET_HAS_FCC is not set
-# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_FS_ENET_MDIO_FCC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -680,7 +683,68 @@ CONFIG_HW_RANDOM=y
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_POWERMAC is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_CPM=y
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_PCF8575 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -699,6 +763,9 @@ CONFIG_GPIOLIB=y
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
@@ -727,7 +794,14 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index ada595898af..ee6acc6557f 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -203,6 +203,7 @@ CONFIG_MPC85xx_CDS=y
CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
+CONFIG_MPC85xx_RDB=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
# CONFIG_XES_MPC85xx is not set
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index 897eade3afb..56f2f2ea563 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -56,174 +56,102 @@
#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG)
#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7)
+/* Macro for generating the ***_bits() functions */
+#define DEFINE_BITOP(fn, op, prefix, postfix) \
+static __inline__ void fn(unsigned long mask, \
+ volatile unsigned long *_p) \
+{ \
+ unsigned long old; \
+ unsigned long *p = (unsigned long *)_p; \
+ __asm__ __volatile__ ( \
+ prefix \
+"1:" PPC_LLARX "%0,0,%3\n" \
+ stringify_in_c(op) "%0,%0,%2\n" \
+ PPC405_ERR77(0,%3) \
+ PPC_STLCX "%0,0,%3\n" \
+ "bne- 1b\n" \
+ postfix \
+ : "=&r" (old), "+m" (*p) \
+ : "r" (mask), "r" (p) \
+ : "cc", "memory"); \
+}
+
+DEFINE_BITOP(set_bits, or, "", "")
+DEFINE_BITOP(clear_bits, andc, "", "")
+DEFINE_BITOP(clear_bits_unlock, andc, LWSYNC_ON_SMP, "")
+DEFINE_BITOP(change_bits, xor, "", "")
+
static __inline__ void set_bit(int nr, volatile unsigned long *addr)
{
- unsigned long old;
- unsigned long mask = BITOP_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
- __asm__ __volatile__(
-"1:" PPC_LLARX "%0,0,%3 # set_bit\n"
- "or %0,%0,%2\n"
- PPC405_ERR77(0,%3)
- PPC_STLCX "%0,0,%3\n"
- "bne- 1b"
- : "=&r" (old), "+m" (*p)
- : "r" (mask), "r" (p)
- : "cc" );
+ set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
}
static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
{
- unsigned long old;
- unsigned long mask = BITOP_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
- __asm__ __volatile__(
-"1:" PPC_LLARX "%0,0,%3 # clear_bit\n"
- "andc %0,%0,%2\n"
- PPC405_ERR77(0,%3)
- PPC_STLCX "%0,0,%3\n"
- "bne- 1b"
- : "=&r" (old), "+m" (*p)
- : "r" (mask), "r" (p)
- : "cc" );
+ clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
}
static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
{
- unsigned long old;
- unsigned long mask = BITOP_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
- __asm__ __volatile__(
- LWSYNC_ON_SMP
-"1:" PPC_LLARX "%0,0,%3 # clear_bit_unlock\n"
- "andc %0,%0,%2\n"
- PPC405_ERR77(0,%3)
- PPC_STLCX "%0,0,%3\n"
- "bne- 1b"
- : "=&r" (old), "+m" (*p)
- : "r" (mask), "r" (p)
- : "cc", "memory");
+ clear_bits_unlock(BITOP_MASK(nr), addr + BITOP_WORD(nr));
}
static __inline__ void change_bit(int nr, volatile unsigned long *addr)
{
- unsigned long old;
- unsigned long mask = BITOP_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
- __asm__ __volatile__(
-"1:" PPC_LLARX "%0,0,%3 # change_bit\n"
- "xor %0,%0,%2\n"
- PPC405_ERR77(0,%3)
- PPC_STLCX "%0,0,%3\n"
- "bne- 1b"
- : "=&r" (old), "+m" (*p)
- : "r" (mask), "r" (p)
- : "cc" );
+ change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+}
+
+/* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output
+ * operands. */
+#define DEFINE_TESTOP(fn, op, prefix, postfix) \
+static __inline__ unsigned long fn( \
+ unsigned long mask, \
+ volatile unsigned long *_p) \
+{ \
+ unsigned long old, t; \
+ unsigned long *p = (unsigned long *)_p; \
+ __asm__ __volatile__ ( \
+ prefix \
+"1:" PPC_LLARX "%0,0,%3\n" \
+ stringify_in_c(op) "%1,%0,%2\n" \
+ PPC405_ERR77(0,%3) \
+ PPC_STLCX "%1,0,%3\n" \
+ "bne- 1b\n" \
+ postfix \
+ : "=&r" (old), "=&r" (t) \
+ : "r" (mask), "r" (p) \
+ : "cc", "memory"); \
+ return (old & mask); \
}
+DEFINE_TESTOP(test_and_set_bits, or, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_set_bits_lock, or, "", ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_clear_bits, andc, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_change_bits, xor, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+
static __inline__ int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned long old, t;
- unsigned long mask = BITOP_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
- __asm__ __volatile__(
- LWSYNC_ON_SMP
-"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit\n"
- "or %1,%0,%2 \n"
- PPC405_ERR77(0,%3)
- PPC_STLCX "%1,0,%3 \n"
- "bne- 1b"
- ISYNC_ON_SMP
- : "=&r" (old), "=&r" (t)
- : "r" (mask), "r" (p)
- : "cc", "memory");
-
- return (old & mask) != 0;
+ return test_and_set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
}
static __inline__ int test_and_set_bit_lock(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned long old, t;
- unsigned long mask = BITOP_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
- __asm__ __volatile__(
-"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit_lock\n"
- "or %1,%0,%2 \n"
- PPC405_ERR77(0,%3)
- PPC_STLCX "%1,0,%3 \n"
- "bne- 1b"
- ISYNC_ON_SMP
- : "=&r" (old), "=&r" (t)
- : "r" (mask), "r" (p)
- : "cc", "memory");
-
- return (old & mask) != 0;
+ return test_and_set_bits_lock(BITOP_MASK(nr),
+ addr + BITOP_WORD(nr)) != 0;
}
static __inline__ int test_and_clear_bit(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned long old, t;
- unsigned long mask = BITOP_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
- __asm__ __volatile__(
- LWSYNC_ON_SMP
-"1:" PPC_LLARX "%0,0,%3 # test_and_clear_bit\n"
- "andc %1,%0,%2 \n"
- PPC405_ERR77(0,%3)
- PPC_STLCX "%1,0,%3 \n"
- "bne- 1b"
- ISYNC_ON_SMP
- : "=&r" (old), "=&r" (t)
- : "r" (mask), "r" (p)
- : "cc", "memory");
-
- return (old & mask) != 0;
+ return test_and_clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
}
static __inline__ int test_and_change_bit(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned long old, t;
- unsigned long mask = BITOP_MASK(nr);
- unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
- __asm__ __volatile__(
- LWSYNC_ON_SMP
-"1:" PPC_LLARX "%0,0,%3 # test_and_change_bit\n"
- "xor %1,%0,%2 \n"
- PPC405_ERR77(0,%3)
- PPC_STLCX "%1,0,%3 \n"
- "bne- 1b"
- ISYNC_ON_SMP
- : "=&r" (old), "=&r" (t)
- : "r" (mask), "r" (p)
- : "cc", "memory");
-
- return (old & mask) != 0;
-}
-
-static __inline__ void set_bits(unsigned long mask, unsigned long *addr)
-{
- unsigned long old;
-
- __asm__ __volatile__(
-"1:" PPC_LLARX "%0,0,%3 # set_bits\n"
- "or %0,%0,%2\n"
- PPC_STLCX "%0,0,%3\n"
- "bne- 1b"
- : "=&r" (old), "+m" (*addr)
- : "r" (mask), "r" (addr)
- : "cc");
+ return test_and_change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
}
#include <asm-generic/bitops/non-atomic.h>
diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h
index fd6fd00434e..fdf64fd2595 100644
--- a/arch/powerpc/include/asm/cell-regs.h
+++ b/arch/powerpc/include/asm/cell-regs.h
@@ -303,6 +303,17 @@ struct cbe_mic_tm_regs {
extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
+
+/* Cell page table entries */
+#define CBE_IOPTE_PP_W 0x8000000000000000ul /* protection: write */
+#define CBE_IOPTE_PP_R 0x4000000000000000ul /* protection: read */
+#define CBE_IOPTE_M 0x2000000000000000ul /* coherency required */
+#define CBE_IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */
+#define CBE_IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */
+#define CBE_IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */
+#define CBE_IOPTE_H 0x0000000000000800ul /* cache hint */
+#define CBE_IOPTE_IOID_Mask 0x00000000000007fful /* ioid */
+
/* some utility functions to deal with SMT */
extern u32 cbe_get_hw_thread_id(int cpu);
extern u32 cbe_cpu_to_node(int cpu);
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index fb11b0c459b..a8e18447c62 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -5,6 +5,15 @@
/*
* Mapping of threads to cores
+ *
+ * Note: This implementation is limited to a power of 2 number of
+ * threads per core and the same number for each core in the system
+ * (though it would work if some processors had less threads as long
+ * as the CPU numbers are still allocated, just not brought offline).
+ *
+ * However, the API allows for a different implementation in the future
+ * if needed, as long as you only use the functions and not the variables
+ * directly.
*/
#ifdef CONFIG_SMP
@@ -67,5 +76,12 @@ static inline int cpu_first_thread_in_core(int cpu)
return cpu & ~(threads_per_core - 1);
}
+static inline int cpu_last_thread_in_core(int cpu)
+{
+ return cpu | (threads_per_core - 1);
+}
+
+
+
#endif /* _ASM_POWERPC_CPUTHREADS_H */
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index e3e06e0f7fc..9dade15d1ab 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -6,7 +6,7 @@
#ifndef _ASM_POWERPC_DEVICE_H
#define _ASM_POWERPC_DEVICE_H
-struct dma_mapping_ops;
+struct dma_map_ops;
struct device_node;
struct dev_archdata {
@@ -14,8 +14,11 @@ struct dev_archdata {
struct device_node *of_node;
/* DMA operations on that device */
- struct dma_mapping_ops *dma_ops;
+ struct dma_map_ops *dma_ops;
void *dma_data;
+#ifdef CONFIG_SWIOTLB
+ dma_addr_t max_direct_dma_addr;
+#endif
};
static inline void dev_archdata_set_node(struct dev_archdata *ad,
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 0c34371ec49..cb2ca41dd52 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -14,6 +14,7 @@
#include <linux/mm.h>
#include <linux/scatterlist.h>
#include <linux/dma-attrs.h>
+#include <linux/dma-debug.h>
#include <asm/io.h>
#include <asm/swiotlb.h>
@@ -64,58 +65,14 @@ static inline unsigned long device_to_mask(struct device *dev)
}
/*
- * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
- */
-struct dma_mapping_ops {
- void * (*alloc_coherent)(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag);
- void (*free_coherent)(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle);
- int (*map_sg)(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction,
- struct dma_attrs *attrs);
- void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction,
- struct dma_attrs *attrs);
- int (*dma_supported)(struct device *dev, u64 mask);
- int (*set_dma_mask)(struct device *dev, u64 dma_mask);
- dma_addr_t (*map_page)(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs);
- void (*unmap_page)(struct device *dev,
- dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs);
- int (*addr_needs_map)(struct device *dev, dma_addr_t addr,
- size_t size);
-#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
- void (*sync_single_range_for_cpu)(struct device *hwdev,
- dma_addr_t dma_handle, unsigned long offset,
- size_t size,
- enum dma_data_direction direction);
- void (*sync_single_range_for_device)(struct device *hwdev,
- dma_addr_t dma_handle, unsigned long offset,
- size_t size,
- enum dma_data_direction direction);
- void (*sync_sg_for_cpu)(struct device *hwdev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction direction);
- void (*sync_sg_for_device)(struct device *hwdev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction direction);
-#endif
-};
-
-/*
* Available generic sets of operations
*/
#ifdef CONFIG_PPC64
-extern struct dma_mapping_ops dma_iommu_ops;
+extern struct dma_map_ops dma_iommu_ops;
#endif
-extern struct dma_mapping_ops dma_direct_ops;
+extern struct dma_map_ops dma_direct_ops;
-static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
{
/* We don't handle the NULL dev case for ISA for now. We could
* do it via an out of line call but it is not needed for now. The
@@ -128,14 +85,19 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
return dev->archdata.dma_ops;
}
-static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
+static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
{
dev->archdata.dma_ops = ops;
}
+/* this will be removed soon */
+#define flush_write_buffers()
+
+#include <asm-generic/dma-mapping-common.h>
+
static inline int dma_supported(struct device *dev, u64 mask)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
if (unlikely(dma_ops == NULL))
return 0;
@@ -149,7 +111,7 @@ static inline int dma_supported(struct device *dev, u64 mask)
static inline int dma_set_mask(struct device *dev, u64 dma_mask)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
if (unlikely(dma_ops == NULL))
return -EIO;
@@ -161,262 +123,40 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
return 0;
}
-/*
- * map_/unmap_single actually call through to map/unmap_page now that all the
- * dma_mapping_ops have been converted over. We just have to get the page and
- * offset to pass through to map_page
- */
-static inline dma_addr_t dma_map_single_attrs(struct device *dev,
- void *cpu_addr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
-
- return dma_ops->map_page(dev, virt_to_page(cpu_addr),
- (unsigned long)cpu_addr % PAGE_SIZE, size,
- direction, attrs);
-}
-
-static inline void dma_unmap_single_attrs(struct device *dev,
- dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
-
- dma_ops->unmap_page(dev, dma_addr, size, direction, attrs);
-}
-
-static inline dma_addr_t dma_map_page_attrs(struct device *dev,
- struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
-
- return dma_ops->map_page(dev, page, offset, size, direction, attrs);
-}
-
-static inline void dma_unmap_page_attrs(struct device *dev,
- dma_addr_t dma_address,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
-
- dma_ops->unmap_page(dev, dma_address, size, direction, attrs);
-}
-
-static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- return dma_ops->map_sg(dev, sg, nents, direction, attrs);
-}
-
-static inline void dma_unmap_sg_attrs(struct device *dev,
- struct scatterlist *sg,
- int nhwentries,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
-}
-
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
- void *cpu_addr, dma_addr_t dma_handle)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
- dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
- size_t size,
- enum dma_data_direction direction)
-{
- return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction)
-{
- dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size,
- enum dma_data_direction direction)
-{
- dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
-{
- return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nhwentries,
- enum dma_data_direction direction)
-{
- dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
-}
-
-#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
-static inline void dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
-
- if (dma_ops->sync_single_range_for_cpu)
- dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
- size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
-
- if (dma_ops->sync_single_range_for_device)
- dma_ops->sync_single_range_for_device(dev, dma_handle,
- 0, size, direction);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sgl, int nents,
- enum dma_data_direction direction)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
+ void *cpu_addr;
BUG_ON(!dma_ops);
- if (dma_ops->sync_sg_for_cpu)
- dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sgl, int nents,
- enum dma_data_direction direction)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
- BUG_ON(!dma_ops);
-
- if (dma_ops->sync_sg_for_device)
- dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
- dma_addr_t dma_handle, unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+ cpu_addr = dma_ops->alloc_coherent(dev, size, dma_handle, flag);
- BUG_ON(!dma_ops);
+ debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
- if (dma_ops->sync_single_range_for_cpu)
- dma_ops->sync_single_range_for_cpu(dev, dma_handle,
- offset, size, direction);
+ return cpu_addr;
}
-static inline void dma_sync_single_range_for_device(struct device *dev,
- dma_addr_t dma_handle, unsigned long offset, size_t size,
- enum dma_data_direction direction)
+static inline void dma_free_coherent(struct device *dev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle)
{
- struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- if (dma_ops->sync_single_range_for_device)
- dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
- size, direction);
-}
-#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
-static inline void dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sgl, int nents,
- enum dma_data_direction direction)
-{
-}
+ debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
-static inline void dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sgl, int nents,
- enum dma_data_direction direction)
-{
+ dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
}
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
- dma_addr_t dma_handle, unsigned long offset, size_t size,
- enum dma_data_direction direction)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
-}
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
-static inline void dma_sync_single_range_for_device(struct device *dev,
- dma_addr_t dma_handle, unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
-}
-#endif
+ if (dma_ops->mapping_error)
+ return dma_ops->mapping_error(dev, dma_addr);
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
#ifdef CONFIG_PPC64
return (dma_addr == DMA_ERROR_CODE);
#else
@@ -426,10 +166,12 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
{
- struct dma_mapping_ops *ops = get_dma_ops(dev);
+#ifdef CONFIG_SWIOTLB
+ struct dev_archdata *sd = &dev->archdata;
- if (ops->addr_needs_map && ops->addr_needs_map(dev, addr, size))
+ if (sd->max_direct_dma_addr && addr + size > sd->max_direct_dma_addr)
return 0;
+#endif
if (!dev->dma_mask)
return 0;
diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
new file mode 100644
index 00000000000..6d53f311d94
--- /dev/null
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -0,0 +1,205 @@
+/*
+ * Definitions for use by exception code on Book3-E
+ *
+ * Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_EXCEPTION_64E_H
+#define _ASM_POWERPC_EXCEPTION_64E_H
+
+/*
+ * SPRGs usage an other considerations...
+ *
+ * Since TLB miss and other standard exceptions can be interrupted by
+ * critical exceptions which can themselves be interrupted by machine
+ * checks, and since the two later can themselves cause a TLB miss when
+ * hitting the linear mapping for the kernel stacks, we need to be a bit
+ * creative on how we use SPRGs.
+ *
+ * The base idea is that we have one SRPG reserved for critical and one
+ * for machine check interrupts. Those are used to save a GPR that can
+ * then be used to get the PACA, and store as much context as we need
+ * to save in there. That includes saving the SPRGs used by the TLB miss
+ * handler for linear mapping misses and the associated SRR0/1 due to
+ * the above re-entrancy issue.
+ *
+ * So here's the current usage pattern. It's done regardless of which
+ * SPRGs are user-readable though, thus we might have to change some of
+ * this later. In order to do that more easily, we use special constants
+ * for naming them
+ *
+ * WARNING: Some of these SPRGs are user readable. We need to do something
+ * about it as some point by making sure they can't be used to leak kernel
+ * critical data
+ */
+
+
+/* We are out of SPRGs so we save some things in the PACA. The normal
+ * exception frame is smaller than the CRIT or MC one though
+ */
+#define EX_R1 (0 * 8)
+#define EX_CR (1 * 8)
+#define EX_R10 (2 * 8)
+#define EX_R11 (3 * 8)
+#define EX_R14 (4 * 8)
+#define EX_R15 (5 * 8)
+
+/* The TLB miss exception uses different slots */
+
+#define EX_TLB_R10 ( 0 * 8)
+#define EX_TLB_R11 ( 1 * 8)
+#define EX_TLB_R12 ( 2 * 8)
+#define EX_TLB_R13 ( 3 * 8)
+#define EX_TLB_R14 ( 4 * 8)
+#define EX_TLB_R15 ( 5 * 8)
+#define EX_TLB_R16 ( 6 * 8)
+#define EX_TLB_CR ( 7 * 8)
+#define EX_TLB_DEAR ( 8 * 8) /* Level 0 and 2 only */
+#define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */
+#define EX_TLB_SRR0 (10 * 8)
+#define EX_TLB_SRR1 (11 * 8)
+#define EX_TLB_MMUCR0 (12 * 8) /* Level 0 */
+#define EX_TLB_MAS1 (12 * 8) /* Level 0 */
+#define EX_TLB_MAS2 (13 * 8) /* Level 0 */
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+#define EX_TLB_R8 (14 * 8)
+#define EX_TLB_R9 (15 * 8)
+#define EX_TLB_LR (16 * 8)
+#define EX_TLB_SIZE (17 * 8)
+#else
+#define EX_TLB_SIZE (14 * 8)
+#endif
+
+#define START_EXCEPTION(label) \
+ .globl exc_##label##_book3e; \
+exc_##label##_book3e:
+
+/* TLB miss exception prolog
+ *
+ * This prolog handles re-entrancy (up to 3 levels supported in the PACA
+ * though we currently don't test for overflow). It provides you with a
+ * re-entrancy safe working space of r10...r16 and CR with r12 being used
+ * as the exception area pointer in the PACA for that level of re-entrancy
+ * and r13 containing the PACA pointer.
+ *
+ * SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply
+ * as-is for instruction exceptions. It's up to the actual exception code
+ * to save them as well if required.
+ */
+#define TLB_MISS_PROLOG \
+ mtspr SPRN_SPRG_TLB_SCRATCH,r12; \
+ mfspr r12,SPRN_SPRG_TLB_EXFRAME; \
+ std r10,EX_TLB_R10(r12); \
+ mfcr r10; \
+ std r11,EX_TLB_R11(r12); \
+ mfspr r11,SPRN_SPRG_TLB_SCRATCH; \
+ std r13,EX_TLB_R13(r12); \
+ mfspr r13,SPRN_SPRG_PACA; \
+ std r14,EX_TLB_R14(r12); \
+ addi r14,r12,EX_TLB_SIZE; \
+ std r15,EX_TLB_R15(r12); \
+ mfspr r15,SPRN_SRR1; \
+ std r16,EX_TLB_R16(r12); \
+ mfspr r16,SPRN_SRR0; \
+ std r10,EX_TLB_CR(r12); \
+ std r11,EX_TLB_R12(r12); \
+ mtspr SPRN_SPRG_TLB_EXFRAME,r14; \
+ std r15,EX_TLB_SRR1(r12); \
+ std r16,EX_TLB_SRR0(r12); \
+ TLB_MISS_PROLOG_STATS
+
+/* And these are the matching epilogs that restores things
+ *
+ * There are 3 epilogs:
+ *
+ * - SUCCESS : Unwinds one level
+ * - ERROR : restore from level 0 and reset
+ * - ERROR_SPECIAL : restore from current level and reset
+ *
+ * Normal errors use ERROR, that is, they restore the initial fault context
+ * and trigger a fault. However, there is a special case for linear mapping
+ * errors. Those should basically never happen, but if they do happen, we
+ * want the error to point out the context that did that linear mapping
+ * fault, not the initial level 0 (basically, we got a bogus PGF or something
+ * like that). For userland errors on the linear mapping, there is no
+ * difference since those are always level 0 anyway
+ */
+
+#define TLB_MISS_RESTORE(freg) \
+ ld r14,EX_TLB_CR(r12); \
+ ld r10,EX_TLB_R10(r12); \
+ ld r15,EX_TLB_SRR0(r12); \
+ ld r16,EX_TLB_SRR1(r12); \
+ mtspr SPRN_SPRG_TLB_EXFRAME,freg; \
+ ld r11,EX_TLB_R11(r12); \
+ mtcr r14; \
+ ld r13,EX_TLB_R13(r12); \
+ ld r14,EX_TLB_R14(r12); \
+ mtspr SPRN_SRR0,r15; \
+ ld r15,EX_TLB_R15(r12); \
+ mtspr SPRN_SRR1,r16; \
+ TLB_MISS_RESTORE_STATS \
+ ld r16,EX_TLB_R16(r12); \
+ ld r12,EX_TLB_R12(r12); \
+
+#define TLB_MISS_EPILOG_SUCCESS \
+ TLB_MISS_RESTORE(r12)
+
+#define TLB_MISS_EPILOG_ERROR \
+ addi r12,r13,PACA_EXTLB; \
+ TLB_MISS_RESTORE(r12)
+
+#define TLB_MISS_EPILOG_ERROR_SPECIAL \
+ addi r11,r13,PACA_EXTLB; \
+ TLB_MISS_RESTORE(r11)
+
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+#define TLB_MISS_PROLOG_STATS \
+ mflr r10; \
+ std r8,EX_TLB_R8(r12); \
+ std r9,EX_TLB_R9(r12); \
+ std r10,EX_TLB_LR(r12);
+#define TLB_MISS_RESTORE_STATS \
+ ld r16,EX_TLB_LR(r12); \
+ ld r9,EX_TLB_R9(r12); \
+ ld r8,EX_TLB_R8(r12); \
+ mtlr r16;
+#define TLB_MISS_STATS_D(name) \
+ addi r9,r13,MMSTAT_DSTATS+name; \
+ bl .tlb_stat_inc;
+#define TLB_MISS_STATS_I(name) \
+ addi r9,r13,MMSTAT_ISTATS+name; \
+ bl .tlb_stat_inc;
+#define TLB_MISS_STATS_X(name) \
+ ld r8,PACA_EXTLB+EX_TLB_ESR(r13); \
+ cmpdi cr2,r8,-1; \
+ beq cr2,61f; \
+ addi r9,r13,MMSTAT_DSTATS+name; \
+ b 62f; \
+61: addi r9,r13,MMSTAT_ISTATS+name; \
+62: bl .tlb_stat_inc;
+#define TLB_MISS_STATS_SAVE_INFO \
+ std r14,EX_TLB_ESR(r12); /* save ESR */ \
+
+
+#else
+#define TLB_MISS_PROLOG_STATS
+#define TLB_MISS_RESTORE_STATS
+#define TLB_MISS_STATS_D(name)
+#define TLB_MISS_STATS_I(name)
+#define TLB_MISS_STATS_X(name)
+#define TLB_MISS_STATS_Y(name)
+#define TLB_MISS_STATS_SAVE_INFO
+#endif
+
+#define SET_IVOR(vector_number, vector_offset) \
+ li r3,vector_offset@l; \
+ ori r3,r3,interrupt_base_book3e@l; \
+ mtspr SPRN_IVOR##vector_number,r3;
+
+#endif /* _ASM_POWERPC_EXCEPTION_64E_H */
+
diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception-64s.h
index d3d4534e3c7..a98653b2623 100644
--- a/arch/powerpc/include/asm/exception.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -57,17 +57,16 @@
addi reg,reg,(label)-_stext; /* virt addr of handler ... */
#define EXCEPTION_PROLOG_1(area) \
- mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
+ mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \
std r9,area+EX_R9(r13); /* save r9 - r12 */ \
std r10,area+EX_R10(r13); \
std r11,area+EX_R11(r13); \
std r12,area+EX_R12(r13); \
- mfspr r9,SPRN_SPRG1; \
+ mfspr r9,SPRN_SPRG_SCRATCH0; \
std r9,area+EX_R13(r13); \
mfcr r9
-#define EXCEPTION_PROLOG_PSERIES(area, label) \
- EXCEPTION_PROLOG_1(area); \
+#define EXCEPTION_PROLOG_PSERIES_1(label) \
ld r12,PACAKBASE(r13); /* get high part of &label */ \
ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
mfspr r11,SPRN_SRR0; /* save SRR0 */ \
@@ -78,6 +77,10 @@
rfid; \
b . /* prevent speculative execution */
+#define EXCEPTION_PROLOG_PSERIES(area, label) \
+ EXCEPTION_PROLOG_1(area); \
+ EXCEPTION_PROLOG_PSERIES_1(label);
+
/*
* The common exception prolog is used for all except a few exceptions
* such as a segment miss on a kernel address. We have to be prepared
@@ -144,7 +147,7 @@
.globl label##_pSeries; \
label##_pSeries: \
HMT_MEDIUM; \
- mtspr SPRN_SPRG1,r13; /* save r13 */ \
+ mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
#define HSTD_EXCEPTION_PSERIES(n, label) \
@@ -152,13 +155,13 @@ label##_pSeries: \
.globl label##_pSeries; \
label##_pSeries: \
HMT_MEDIUM; \
- mtspr SPRN_SPRG1,r20; /* save r20 */ \
+ mtspr SPRN_SPRG_SCRATCH0,r20; /* save r20 */ \
mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \
mtspr SPRN_SRR0,r20; \
mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \
mtspr SPRN_SRR1,r20; \
- mfspr r20,SPRN_SPRG1; /* restore r20 */ \
- mtspr SPRN_SPRG1,r13; /* save r13 */ \
+ mfspr r20,SPRN_SPRG_SCRATCH0; /* restore r20 */ \
+ mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
@@ -167,15 +170,15 @@ label##_pSeries: \
.globl label##_pSeries; \
label##_pSeries: \
HMT_MEDIUM; \
- mtspr SPRN_SPRG1,r13; /* save r13 */ \
- mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
+ mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
+ mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \
std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \
std r10,PACA_EXGEN+EX_R10(r13); \
lbz r10,PACASOFTIRQEN(r13); \
mfcr r9; \
cmpwi r10,0; \
beq masked_interrupt; \
- mfspr r10,SPRN_SPRG1; \
+ mfspr r10,SPRN_SPRG_SCRATCH0; \
std r10,PACA_EXGEN+EX_R13(r13); \
std r11,PACA_EXGEN+EX_R11(r13); \
std r12,PACA_EXGEN+EX_R12(r13); \
diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h
index 288e14d53b7..fb3c05a0cbb 100644
--- a/arch/powerpc/include/asm/hardirq.h
+++ b/arch/powerpc/include/asm/hardirq.h
@@ -1,29 +1 @@
-#ifndef _ASM_POWERPC_HARDIRQ_H
-#define _ASM_POWERPC_HARDIRQ_H
-#ifdef __KERNEL__
-
-#include <asm/irq.h>
-#include <asm/bug.h>
-
-/* The __last_jiffy_stamp field is needed to ensure that no decrementer
- * interrupt is lost on SMP machines. Since on most CPUs it is in the same
- * cache line as local_irq_count, it is cheap to access and is also used on UP
- * for uniformity.
- */
-typedef struct {
- unsigned int __softirq_pending; /* set_bit is used on this */
- unsigned int __last_jiffy_stamp;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
-
-static inline void ack_bad_irq(int irq)
-{
- printk(KERN_CRIT "illegal vector %d received!\n", irq);
- BUG();
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HARDIRQ_H */
+#include <asm-generic/hardirq.h>
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 8b505eaaa38..e73d554538d 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -49,8 +49,13 @@ extern void iseries_handle_interrupts(void);
#define raw_irqs_disabled() (local_get_flags() == 0)
#define raw_irqs_disabled_flags(flags) ((flags) == 0)
+#ifdef CONFIG_PPC_BOOK3E
+#define __hard_irq_enable() __asm__ __volatile__("wrteei 1": : :"memory");
+#define __hard_irq_disable() __asm__ __volatile__("wrteei 0": : :"memory");
+#else
#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1)
+#endif
#define hard_irq_disable() \
do { \
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 7ead7c16fb7..7464c0daddd 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -35,16 +35,6 @@
#define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1))
#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
-/* Cell page table entries */
-#define CBE_IOPTE_PP_W 0x8000000000000000ul /* protection: write */
-#define CBE_IOPTE_PP_R 0x4000000000000000ul /* protection: read */
-#define CBE_IOPTE_M 0x2000000000000000ul /* coherency required */
-#define CBE_IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */
-#define CBE_IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */
-#define CBE_IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */
-#define CBE_IOPTE_H 0x0000000000000800ul /* cache hint */
-#define CBE_IOPTE_IOID_Mask 0x00000000000007fful /* ioid */
-
/* Boot time flags */
extern int iommu_is_off;
extern int iommu_force_on;
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 0a5137676e1..bbcd1aaf3df 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -302,7 +302,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count);
/* -- OF helpers -- */
-/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+/**
+ * irq_create_of_mapping - Map a hardware interrupt into linux virq space
* @controller: Device node of the interrupt controller
* @inspec: Interrupt specifier from the device-tree
* @intsize: Size of the interrupt specifier from the device-tree
@@ -314,8 +315,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count);
extern unsigned int irq_create_of_mapping(struct device_node *controller,
u32 *intspec, unsigned int intsize);
-
-/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+/**
+ * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
* @device: Device node of the device whose interrupt is to be mapped
* @index: Index of the interrupt to map
*
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 11d1fc3a896..9efa2be7833 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -209,14 +209,14 @@ struct machdep_calls {
/*
* optional PCI "hooks"
*/
- /* Called in indirect_* to avoid touching devices */
- int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
-
/* Called at then very end of pcibios_init() */
void (*pcibios_after_init)(void);
#endif /* CONFIG_PPC32 */
+ /* Called in indirect_* to avoid touching devices */
+ int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
+
/* Called after PPC generic resource fixup to perform
machine specific fixups */
void (*pcibios_fixup_resources)(struct pci_dev *);
diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h
index 776f415a36a..34916865eae 100644
--- a/arch/powerpc/include/asm/mmu-40x.h
+++ b/arch/powerpc/include/asm/mmu-40x.h
@@ -61,4 +61,7 @@ typedef struct {
#endif /* !__ASSEMBLY__ */
+#define mmu_virtual_psize MMU_PAGE_4K
+#define mmu_linear_psize MMU_PAGE_256M
+
#endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
index 3c86576bfef..0372669383a 100644
--- a/arch/powerpc/include/asm/mmu-44x.h
+++ b/arch/powerpc/include/asm/mmu-44x.h
@@ -79,16 +79,22 @@ typedef struct {
#if (PAGE_SHIFT == 12)
#define PPC44x_TLBE_SIZE PPC44x_TLB_4K
+#define mmu_virtual_psize MMU_PAGE_4K
#elif (PAGE_SHIFT == 14)
#define PPC44x_TLBE_SIZE PPC44x_TLB_16K
+#define mmu_virtual_psize MMU_PAGE_16K
#elif (PAGE_SHIFT == 16)
#define PPC44x_TLBE_SIZE PPC44x_TLB_64K
+#define mmu_virtual_psize MMU_PAGE_64K
#elif (PAGE_SHIFT == 18)
#define PPC44x_TLBE_SIZE PPC44x_TLB_256K
+#define mmu_virtual_psize MMU_PAGE_256K
#else
#error "Unsupported PAGE_SIZE"
#endif
+#define mmu_linear_psize MMU_PAGE_256M
+
#define PPC44x_PGD_OFF_SHIFT (32 - PGDIR_SHIFT + PGD_T_LOG2)
#define PPC44x_PGD_OFF_MASK_BIT (PGDIR_SHIFT - PGD_T_LOG2)
#define PPC44x_PTE_ADD_SHIFT (32 - PGDIR_SHIFT + PTE_SHIFT + PTE_T_LOG2)
diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
index 07865a35784..3d11d3ce79e 100644
--- a/arch/powerpc/include/asm/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -143,4 +143,7 @@ typedef struct {
} mm_context_t;
#endif /* !__ASSEMBLY__ */
+#define mmu_virtual_psize MMU_PAGE_4K
+#define mmu_linear_psize MMU_PAGE_8M
+
#endif /* _ASM_POWERPC_MMU_8XX_H_ */
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 7e74cff81d8..74695816205 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -38,58 +38,140 @@
#define BOOK3E_PAGESZ_1TB 30
#define BOOK3E_PAGESZ_2TB 31
-#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000)
-#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
-#define MAS0_NV(x) ((x) & 0x00000FFF)
-
-#define MAS1_VALID 0x80000000
-#define MAS1_IPROT 0x40000000
-#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
-#define MAS1_IND 0x00002000
-#define MAS1_TS 0x00001000
-#define MAS1_TSIZE(x) ((x << 7) & 0x00000F80)
-
-#define MAS2_EPN 0xFFFFF000
-#define MAS2_X0 0x00000040
-#define MAS2_X1 0x00000020
-#define MAS2_W 0x00000010
-#define MAS2_I 0x00000008
-#define MAS2_M 0x00000004
-#define MAS2_G 0x00000002
-#define MAS2_E 0x00000001
+/* MAS registers bit definitions */
+
+#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000)
+#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
+#define MAS0_NV(x) ((x) & 0x00000FFF)
+#define MAS0_HES 0x00004000
+#define MAS0_WQ_ALLWAYS 0x00000000
+#define MAS0_WQ_COND 0x00001000
+#define MAS0_WQ_CLR_RSRV 0x00002000
+
+#define MAS1_VALID 0x80000000
+#define MAS1_IPROT 0x40000000
+#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
+#define MAS1_IND 0x00002000
+#define MAS1_TS 0x00001000
+#define MAS1_TSIZE_MASK 0x00000f80
+#define MAS1_TSIZE_SHIFT 7
+#define MAS1_TSIZE(x) ((x << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK)
+
+#define MAS2_EPN 0xFFFFF000
+#define MAS2_X0 0x00000040
+#define MAS2_X1 0x00000020
+#define MAS2_W 0x00000010
+#define MAS2_I 0x00000008
+#define MAS2_M 0x00000004
+#define MAS2_G 0x00000002
+#define MAS2_E 0x00000001
#define MAS2_EPN_MASK(size) (~0 << (size + 10))
#define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags))
-#define MAS3_RPN 0xFFFFF000
-#define MAS3_U0 0x00000200
-#define MAS3_U1 0x00000100
-#define MAS3_U2 0x00000080
-#define MAS3_U3 0x00000040
-#define MAS3_UX 0x00000020
-#define MAS3_SX 0x00000010
-#define MAS3_UW 0x00000008
-#define MAS3_SW 0x00000004
-#define MAS3_UR 0x00000002
-#define MAS3_SR 0x00000001
-
-#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
-#define MAS4_INDD 0x00008000
-#define MAS4_TSIZED(x) MAS1_TSIZE(x)
-#define MAS4_X0D 0x00000040
-#define MAS4_X1D 0x00000020
-#define MAS4_WD 0x00000010
-#define MAS4_ID 0x00000008
-#define MAS4_MD 0x00000004
-#define MAS4_GD 0x00000002
-#define MAS4_ED 0x00000001
-
-#define MAS6_SPID0 0x3FFF0000
-#define MAS6_SPID1 0x00007FFE
-#define MAS6_ISIZE(x) MAS1_TSIZE(x)
-#define MAS6_SAS 0x00000001
-#define MAS6_SPID MAS6_SPID0
-
-#define MAS7_RPN 0xFFFFFFFF
+#define MAS3_RPN 0xFFFFF000
+#define MAS3_U0 0x00000200
+#define MAS3_U1 0x00000100
+#define MAS3_U2 0x00000080
+#define MAS3_U3 0x00000040
+#define MAS3_UX 0x00000020
+#define MAS3_SX 0x00000010
+#define MAS3_UW 0x00000008
+#define MAS3_SW 0x00000004
+#define MAS3_UR 0x00000002
+#define MAS3_SR 0x00000001
+#define MAS3_SPSIZE 0x0000003e
+#define MAS3_SPSIZE_SHIFT 1
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_INDD 0x00008000 /* Default IND */
+#define MAS4_TSIZED(x) MAS1_TSIZE(x)
+#define MAS4_X0D 0x00000040
+#define MAS4_X1D 0x00000020
+#define MAS4_WD 0x00000010
+#define MAS4_ID 0x00000008
+#define MAS4_MD 0x00000004
+#define MAS4_GD 0x00000002
+#define MAS4_ED 0x00000001
+#define MAS4_WIMGED_MASK 0x0000001f /* Default WIMGE */
+#define MAS4_WIMGED_SHIFT 0
+#define MAS4_VLED MAS4_X1D /* Default VLE */
+#define MAS4_ACMD 0x000000c0 /* Default ACM */
+#define MAS4_ACMD_SHIFT 6
+#define MAS4_TSIZED_MASK 0x00000f80 /* Default TSIZE */
+#define MAS4_TSIZED_SHIFT 7
+
+#define MAS6_SPID0 0x3FFF0000
+#define MAS6_SPID1 0x00007FFE
+#define MAS6_ISIZE(x) MAS1_TSIZE(x)
+#define MAS6_SAS 0x00000001
+#define MAS6_SPID MAS6_SPID0
+#define MAS6_SIND 0x00000002 /* Indirect page */
+#define MAS6_SIND_SHIFT 1
+#define MAS6_SPID_MASK 0x3fff0000
+#define MAS6_SPID_SHIFT 16
+#define MAS6_ISIZE_MASK 0x00000f80
+#define MAS6_ISIZE_SHIFT 7
+
+#define MAS7_RPN 0xFFFFFFFF
+
+/* Bit definitions for MMUCSR0 */
+#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */
+#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */
+#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */
+#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */
+#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
+ MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
+#define MMUCSR0_TLB0PS 0x00000780 /* TLB0 Page Size */
+#define MMUCSR0_TLB1PS 0x00007800 /* TLB1 Page Size */
+#define MMUCSR0_TLB2PS 0x00078000 /* TLB2 Page Size */
+#define MMUCSR0_TLB3PS 0x00780000 /* TLB3 Page Size */
+
+/* TLBnCFG encoding */
+#define TLBnCFG_N_ENTRY 0x00000fff /* number of entries */
+#define TLBnCFG_HES 0x00002000 /* HW select supported */
+#define TLBnCFG_IPROT 0x00008000 /* IPROT supported */
+#define TLBnCFG_GTWE 0x00010000 /* Guest can write */
+#define TLBnCFG_IND 0x00020000 /* IND entries supported */
+#define TLBnCFG_PT 0x00040000 /* Can load from page table */
+#define TLBnCFG_ASSOC 0xff000000 /* Associativity */
+
+/* TLBnPS encoding */
+#define TLBnPS_4K 0x00000004
+#define TLBnPS_8K 0x00000008
+#define TLBnPS_16K 0x00000010
+#define TLBnPS_32K 0x00000020
+#define TLBnPS_64K 0x00000040
+#define TLBnPS_128K 0x00000080
+#define TLBnPS_256K 0x00000100
+#define TLBnPS_512K 0x00000200
+#define TLBnPS_1M 0x00000400
+#define TLBnPS_2M 0x00000800
+#define TLBnPS_4M 0x00001000
+#define TLBnPS_8M 0x00002000
+#define TLBnPS_16M 0x00004000
+#define TLBnPS_32M 0x00008000
+#define TLBnPS_64M 0x00010000
+#define TLBnPS_128M 0x00020000
+#define TLBnPS_256M 0x00040000
+#define TLBnPS_512M 0x00080000
+#define TLBnPS_1G 0x00100000
+#define TLBnPS_2G 0x00200000
+#define TLBnPS_4G 0x00400000
+#define TLBnPS_8G 0x00800000
+#define TLBnPS_16G 0x01000000
+#define TLBnPS_32G 0x02000000
+#define TLBnPS_64G 0x04000000
+#define TLBnPS_128G 0x08000000
+#define TLBnPS_256G 0x10000000
+
+/* tlbilx action encoding */
+#define TLBILX_T_ALL 0
+#define TLBILX_T_TID 1
+#define TLBILX_T_FULLMATCH 3
+#define TLBILX_T_CLASS0 4
+#define TLBILX_T_CLASS1 5
+#define TLBILX_T_CLASS2 6
+#define TLBILX_T_CLASS3 7
#ifndef __ASSEMBLY__
@@ -100,6 +182,34 @@ typedef struct {
unsigned int active;
unsigned long vdso_base;
} mm_context_t;
+
+/* Page size definitions, common between 32 and 64-bit
+ *
+ * shift : is the "PAGE_SHIFT" value for that page size
+ * penc : is the pte encoding mask
+ *
+ */
+struct mmu_psize_def
+{
+ unsigned int shift; /* number of bits */
+ unsigned int enc; /* PTE encoding */
+};
+extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
+
+/* The page sizes use the same names as 64-bit hash but are
+ * constants
+ */
+#if defined(CONFIG_PPC_4K_PAGES)
+#define mmu_virtual_psize MMU_PAGE_4K
+#elif defined(CONFIG_PPC_64K_PAGES)
+#define mmu_virtual_psize MMU_PAGE_64K
+#else
+#error Unsupported page size
+#endif
+
+extern int mmu_linear_psize;
+extern int mmu_vmemmap_psize;
+
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
index 16b1a1e77e6..16f513e5cbd 100644
--- a/arch/powerpc/include/asm/mmu-hash32.h
+++ b/arch/powerpc/include/asm/mmu-hash32.h
@@ -55,21 +55,25 @@ struct ppc_bat {
#ifndef __ASSEMBLY__
-/* Hardware Page Table Entry */
+/*
+ * Hardware Page Table Entry
+ * Note that the xpn and x bitfields are used only by processors that
+ * support extended addressing; otherwise, those bits are reserved.
+ */
struct hash_pte {
unsigned long v:1; /* Entry is valid */
unsigned long vsid:24; /* Virtual segment identifier */
unsigned long h:1; /* Hash algorithm indicator */
unsigned long api:6; /* Abbreviated page index */
unsigned long rpn:20; /* Real (physical) page number */
- unsigned long :3; /* Unused */
+ unsigned long xpn:3; /* Real page number bits 0-2, optional */
unsigned long r:1; /* Referenced */
unsigned long c:1; /* Changed */
unsigned long w:1; /* Write-thru cache mode */
unsigned long i:1; /* Cache inhibited */
unsigned long m:1; /* Memory coherence */
unsigned long g:1; /* Guarded */
- unsigned long :1; /* Unused */
+ unsigned long x:1; /* Real page number bit 3, optional */
unsigned long pp:2; /* Page protection */
};
@@ -80,4 +84,10 @@ typedef struct {
#endif /* !__ASSEMBLY__ */
+/* We happily ignore the smaller BATs on 601, we don't actually use
+ * those definitions on hash32 at the moment anyway
+ */
+#define mmu_virtual_psize MMU_PAGE_4K
+#define mmu_linear_psize MMU_PAGE_256M
+
#endif /* _ASM_POWERPC_MMU_HASH32_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 98c104a0996..bebe31c2e90 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -41,6 +41,7 @@ extern char initial_stab[];
#define SLB_NUM_BOLTED 3
#define SLB_CACHE_ENTRIES 8
+#define SLB_MIN_SIZE 32
/* Bits in the SLB ESID word */
#define SLB_ESID_V ASM_CONST(0x0000000008000000) /* valid */
@@ -139,26 +140,6 @@ struct mmu_psize_def
#endif /* __ASSEMBLY__ */
/*
- * The kernel use the constants below to index in the page sizes array.
- * The use of fixed constants for this purpose is better for performances
- * of the low level hash refill handlers.
- *
- * A non supported page size has a "shift" field set to 0
- *
- * Any new page size being implemented can get a new entry in here. Whether
- * the kernel will use it or not is a different matter though. The actual page
- * size used by hugetlbfs is not defined here and may be made variable
- */
-
-#define MMU_PAGE_4K 0 /* 4K */
-#define MMU_PAGE_64K 1 /* 64K */
-#define MMU_PAGE_64K_AP 2 /* 64K Admixed (in a 4K segment) */
-#define MMU_PAGE_1M 3 /* 1M */
-#define MMU_PAGE_16M 4 /* 16M */
-#define MMU_PAGE_16G 5 /* 16G */
-#define MMU_PAGE_COUNT 6
-
-/*
* Segment sizes.
* These are the values used by hardware in the B field of
* SLB entries and the first dword of MMU hashtable entries.
@@ -296,6 +277,7 @@ extern void slb_flush_and_rebolt(void);
extern void stab_initialize(unsigned long stab);
extern void slb_vmalloc_update(void);
+extern void slb_set_size(u16 size);
#endif /* __ASSEMBLY__ */
/*
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index fb57ded592f..7ffbb65ff7a 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -17,6 +17,7 @@
#define MMU_FTR_TYPE_40x ASM_CONST(0x00000004)
#define MMU_FTR_TYPE_44x ASM_CONST(0x00000008)
#define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010)
+#define MMU_FTR_TYPE_3E ASM_CONST(0x00000020)
/*
* This is individual features
@@ -57,6 +58,15 @@
*/
#define MMU_FTR_TLBIE_206 ASM_CONST(0x00400000)
+/* Enable use of TLB reservation. Processor should support tlbsrx.
+ * instruction and MAS0[WQ].
+ */
+#define MMU_FTR_USE_TLBRSRV ASM_CONST(0x00800000)
+
+/* Use paired MAS registers (MAS7||MAS3, etc.)
+ */
+#define MMU_FTR_USE_PAIRED_MAS ASM_CONST(0x01000000)
+
#ifndef __ASSEMBLY__
#include <asm/cputable.h>
@@ -73,6 +83,41 @@ extern void early_init_mmu_secondary(void);
#endif /* !__ASSEMBLY__ */
+/* The kernel use the constants below to index in the page sizes array.
+ * The use of fixed constants for this purpose is better for performances
+ * of the low level hash refill handlers.
+ *
+ * A non supported page size has a "shift" field set to 0
+ *
+ * Any new page size being implemented can get a new entry in here. Whether
+ * the kernel will use it or not is a different matter though. The actual page
+ * size used by hugetlbfs is not defined here and may be made variable
+ *
+ * Note: This array ended up being a false good idea as it's growing to the
+ * point where I wonder if we should replace it with something different,
+ * to think about, feedback welcome. --BenH.
+ */
+
+/* There are #define as they have to be used in assembly
+ *
+ * WARNING: If you change this list, make sure to update the array of
+ * names currently in arch/powerpc/mm/hugetlbpage.c or bad things will
+ * happen
+ */
+#define MMU_PAGE_4K 0
+#define MMU_PAGE_16K 1
+#define MMU_PAGE_64K 2
+#define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */
+#define MMU_PAGE_256K 4
+#define MMU_PAGE_1M 5
+#define MMU_PAGE_8M 6
+#define MMU_PAGE_16M 7
+#define MMU_PAGE_256M 8
+#define MMU_PAGE_1G 9
+#define MMU_PAGE_16G 10
+#define MMU_PAGE_64G 11
+#define MMU_PAGE_COUNT 12
+
#if defined(CONFIG_PPC_STD_MMU_64)
/* 64-bit classic hash table MMU */
@@ -94,5 +139,6 @@ extern void early_init_mmu_secondary(void);
# include <asm/mmu-8xx.h>
#endif
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index b7063669f97..b34e94d9443 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -14,7 +14,6 @@
/*
* Most if the context management is out of line
*/
-extern void mmu_context_init(void);
extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
extern void destroy_context(struct mm_struct *mm);
@@ -23,6 +22,12 @@ extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
extern void set_context(unsigned long id, pgd_t *pgd);
+#ifdef CONFIG_PPC_BOOK3S_64
+static inline void mmu_context_init(void) { }
+#else
+extern void mmu_context_init(void);
+#endif
+
/*
* switch_mm is the entry point called from the architecture independent
* code in kernel/sched.c
@@ -38,6 +43,10 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
tsk->thread.pgdir = next->pgd;
#endif /* CONFIG_PPC32 */
+ /* 64-bit Book3E keeps track of current PGD in the PACA */
+#ifdef CONFIG_PPC_BOOK3E_64
+ get_paca()->pgd = next->pgd;
+#endif
/* Nothing else to do if we aren't actually switching */
if (prev == next)
return;
@@ -84,6 +93,10 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
static inline void enter_lazy_tlb(struct mm_struct *mm,
struct task_struct *tsk)
{
+ /* 64-bit Book3E keeps track of current PGD in the PACA */
+#ifdef CONFIG_PPC_BOOK3E_64
+ get_paca()->pgd = NULL;
+#endif
}
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h
index efde5ac82f7..6c587eddee5 100644
--- a/arch/powerpc/include/asm/nvram.h
+++ b/arch/powerpc/include/asm/nvram.h
@@ -107,6 +107,9 @@ extern void pmac_xpram_write(int xpaddr, u8 data);
/* Synchronize NVRAM */
extern void nvram_sync(void);
+/* Determine NVRAM size */
+extern ssize_t nvram_get_size(void);
+
/* Normal access to NVRAM */
extern unsigned char nvram_read_byte(int i);
extern void nvram_write_byte(unsigned char c, int i);
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index c8a3cbfe02f..b634456ea89 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -14,9 +14,11 @@
#define _ASM_POWERPC_PACA_H
#ifdef __KERNEL__
-#include <asm/types.h>
-#include <asm/lppaca.h>
-#include <asm/mmu.h>
+#include <asm/types.h>
+#include <asm/lppaca.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/exception-64e.h>
register struct paca_struct *local_paca asm("r13");
@@ -91,6 +93,21 @@ struct paca_struct {
u16 slb_cache[SLB_CACHE_ENTRIES];
#endif /* CONFIG_PPC_STD_MMU_64 */
+#ifdef CONFIG_PPC_BOOK3E
+ pgd_t *pgd; /* Current PGD */
+ pgd_t *kernel_pgd; /* Kernel PGD */
+ u64 exgen[8] __attribute__((aligned(0x80)));
+ u64 extlb[EX_TLB_SIZE*3] __attribute__((aligned(0x80)));
+ u64 exmc[8]; /* used for machine checks */
+ u64 excrit[8]; /* used for crit interrupts */
+ u64 exdbg[8]; /* used for debug interrupts */
+
+ /* Kernel stack pointers for use by special exceptions */
+ void *mc_kstack;
+ void *crit_kstack;
+ void *dbg_kstack;
+#endif /* CONFIG_PPC_BOOK3E */
+
mm_context_t context;
/*
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 4940662ee87..ff24254990e 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -139,7 +139,11 @@ extern phys_addr_t kernstart_addr;
* Don't compare things with KERNELBASE or PAGE_OFFSET to test for
* "kernelness", use is_kernel_addr() - it should do what you want.
*/
+#ifdef CONFIG_PPC_BOOK3E_64
+#define is_kernel_addr(x) ((x) >= 0x8000000000000000ul)
+#else
#define is_kernel_addr(x) ((x) >= PAGE_OFFSET)
+#endif
#ifndef __ASSEMBLY__
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 5817a3b747e..3f17b83f55a 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -135,12 +135,22 @@ extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
#endif /* __ASSEMBLY__ */
#else
#define slice_init()
+#ifdef CONFIG_PPC_STD_MMU_64
#define get_slice_psize(mm, addr) ((mm)->context.user_psize)
#define slice_set_user_psize(mm, psize) \
do { \
(mm)->context.user_psize = (psize); \
(mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
} while (0)
+#else /* CONFIG_PPC_STD_MMU_64 */
+#ifdef CONFIG_PPC_64K_PAGES
+#define get_slice_psize(mm, addr) MMU_PAGE_64K
+#else /* CONFIG_PPC_64K_PAGES */
+#define get_slice_psize(mm, addr) MMU_PAGE_4K
+#endif /* !CONFIG_PPC_64K_PAGES */
+#define slice_set_user_psize(mm, psize) do { BUG(); } while(0)
+#endif /* !CONFIG_PPC_STD_MMU_64 */
+
#define slice_set_range_psize(mm, start, len, psize) \
slice_set_user_psize((mm), (psize))
#define slice_mm_new_context(mm) 1
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 4c61fa0b8d7..76e1f313a58 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -77,9 +77,7 @@ struct pci_controller {
int first_busno;
int last_busno;
-#ifndef CONFIG_PPC64
int self_busno;
-#endif
void __iomem *io_base_virt;
#ifdef CONFIG_PPC64
@@ -104,7 +102,6 @@ struct pci_controller {
unsigned int __iomem *cfg_addr;
void __iomem *cfg_data;
-#ifndef CONFIG_PPC64
/*
* Used for variants of PCI indirect handling and possible quirks:
* SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
@@ -128,7 +125,6 @@ struct pci_controller {
#define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010
#define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020
u32 indirect_type;
-#endif /* !CONFIG_PPC64 */
/* Currently, we limit ourselves to 1 IO range and 3 mem
* ranges since the common pci_bus structure can't handle more
*/
@@ -146,21 +142,6 @@ struct pci_controller {
#endif /* CONFIG_PPC64 */
};
-#ifndef CONFIG_PPC64
-
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
- return bus->sysdata;
-}
-
-static inline int isa_vaddr_is_ioport(void __iomem *address)
-{
- /* No specific ISA handling on ppc32 at this stage, it
- * all goes through PCI
- */
- return 0;
-}
-
/* These are used for config access before all the PCI probing
has been done. */
extern int early_read_config_byte(struct pci_controller *hose, int bus,
@@ -182,6 +163,22 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
extern void setup_indirect_pci(struct pci_controller* hose,
resource_size_t cfg_addr,
resource_size_t cfg_data, u32 flags);
+
+#ifndef CONFIG_PPC64
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+ return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+ /* No specific ISA handling on ppc32 at this stage, it
+ * all goes through PCI
+ */
+ return 0;
+}
+
#else /* CONFIG_PPC64 */
/*
@@ -284,11 +281,6 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
extern int pcibios_unmap_io_space(struct pci_bus *bus);
extern int pcibios_map_io_space(struct pci_bus *bus);
-/* Return values for ppc_md.pci_probe_mode function */
-#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */
-#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */
-#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */
-
#ifdef CONFIG_NUMA
#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = (NODE))
#else
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index d9483c504d2..7aca4839387 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -22,6 +22,11 @@
#include <asm-generic/pci-dma-compat.h>
+/* Return values for ppc_md.pci_probe_mode function */
+#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */
+#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */
+#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */
+
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x10000000
@@ -61,8 +66,8 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
}
#ifdef CONFIG_PCI
-extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
-extern struct dma_mapping_ops *get_pci_dma_ops(void);
+extern void set_pci_dma_ops(struct dma_map_ops *dma_ops);
+extern struct dma_map_ops *get_pci_dma_ops(void);
#else /* CONFIG_PCI */
#define set_pci_dma_ops(d)
#define get_pci_dma_ops() NULL
@@ -228,6 +233,8 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
extern void pcibios_setup_bus_devices(struct pci_bus *bus);
extern void pcibios_setup_bus_self(struct pci_bus *bus);
+extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
+extern void pcibios_scan_phb(struct pci_controller *hose, void *sysdata);
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 1730e5e298d..f2e812de7c3 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -4,6 +4,15 @@
#include <linux/mm.h>
+#ifdef CONFIG_PPC_BOOK3E
+extern void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address);
+#else /* CONFIG_PPC_BOOK3E */
+static inline void tlb_flush_pgtable(struct mmu_gather *tlb,
+ unsigned long address)
+{
+}
+#endif /* !CONFIG_PPC_BOOK3E */
+
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
{
free_page((unsigned long)pte);
@@ -19,7 +28,12 @@ typedef struct pgtable_free {
unsigned long val;
} pgtable_free_t;
-#define PGF_CACHENUM_MASK 0x7
+/* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored
+ * and small enough to fit in the low bits of any naturally aligned page
+ * table cache entry. Arbitrarily set to 0x1f, that should give us some
+ * room to grow
+ */
+#define PGF_CACHENUM_MASK 0x1f
static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
unsigned long mask)
@@ -35,19 +49,27 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
#include <asm/pgalloc-32.h>
#endif
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
-
#ifdef CONFIG_SMP
-#define __pte_free_tlb(tlb,ptepage,address) \
-do { \
- pgtable_page_dtor(ptepage); \
- pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
- PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
-} while (0)
-#else
-#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, (pte))
-#endif
+extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+extern void pte_free_finish(void);
+#else /* CONFIG_SMP */
+static inline void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
+{
+ pgtable_free(pgf);
+}
+static inline void pte_free_finish(void) { }
+#endif /* !CONFIG_SMP */
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage,
+ unsigned long address)
+{
+ pgtable_free_t pgf = pgtable_free_cache(page_address(ptepage),
+ PTE_NONCACHE_NUM,
+ PTE_TABLE_SIZE-1);
+ tlb_flush_pgtable(tlb, address);
+ pgtable_page_dtor(ptepage);
+ pgtable_free_tlb(tlb, pgf);
+}
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index c9ff9d75990..55646adfa84 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -111,6 +111,8 @@ extern int icache_44x_need_flush;
#include <asm/pte-40x.h>
#elif defined(CONFIG_44x)
#include <asm/pte-44x.h>
+#elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
+#include <asm/pte-book3e.h>
#elif defined(CONFIG_FSL_BOOKE)
#include <asm/pte-fsl-booke.h>
#elif defined(CONFIG_8xx)
@@ -186,7 +188,7 @@ static inline unsigned long pte_update(pte_t *p,
#endif /* !PTE_ATOMIC_UPDATES */
#ifdef CONFIG_44x
- if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+ if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
icache_44x_need_flush = 1;
#endif
return old;
@@ -217,7 +219,7 @@ static inline unsigned long long pte_update(pte_t *p,
#endif /* !PTE_ATOMIC_UPDATES */
#ifdef CONFIG_44x
- if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+ if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
icache_44x_need_flush = 1;
#endif
return old;
@@ -267,8 +269,7 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
{
unsigned long bits = pte_val(entry) &
- (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW |
- _PAGE_HWEXEC | _PAGE_EXEC);
+ (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
pte_update(ptep, 0, bits);
}
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
index 6cc085b945a..90533ddcd70 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64-64k.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
@@ -10,10 +10,10 @@
#define PGD_INDEX_SIZE 4
#ifndef __ASSEMBLY__
-
#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE)
#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE)
#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif /* __ASSEMBLY__ */
#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE)
@@ -32,8 +32,6 @@
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
-#endif /* __ASSEMBLY__ */
-
/* Bits to mask out from a PMD to get to the PTE page */
#define PMD_MASKED_BITS 0x1ff
/* Bits to mask out from a PGD/PUD to get to the PMD page */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 8cd083c6150..806abe7a3fa 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -5,11 +5,6 @@
* the ppc64 hashed page table.
*/
-#ifndef __ASSEMBLY__
-#include <linux/stddef.h>
-#include <asm/tlbflush.h>
-#endif /* __ASSEMBLY__ */
-
#ifdef CONFIG_PPC_64K_PAGES
#include <asm/pgtable-ppc64-64k.h>
#else
@@ -38,26 +33,47 @@
#endif
/*
- * Define the address range of the vmalloc VM area.
+ * Define the address range of the kernel non-linear virtual area
+ */
+
+#ifdef CONFIG_PPC_BOOK3E
+#define KERN_VIRT_START ASM_CONST(0x8000000000000000)
+#else
+#define KERN_VIRT_START ASM_CONST(0xD000000000000000)
+#endif
+#define KERN_VIRT_SIZE PGTABLE_RANGE
+
+/*
+ * The vmalloc space starts at the beginning of that region, and
+ * occupies half of it on hash CPUs and a quarter of it on Book3E
+ * (we keep a quarter for the virtual memmap)
*/
-#define VMALLOC_START ASM_CONST(0xD000000000000000)
-#define VMALLOC_SIZE (PGTABLE_RANGE >> 1)
-#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE)
+#define VMALLOC_START KERN_VIRT_START
+#ifdef CONFIG_PPC_BOOK3E
+#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 2)
+#else
+#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
+#endif
+#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE)
/*
- * Define the address ranges for MMIO and IO space :
+ * The second half of the kernel virtual space is used for IO mappings,
+ * it's itself carved into the PIO region (ISA and PHB IO space) and
+ * the ioremap space
*
- * ISA_IO_BASE = VMALLOC_END, 64K reserved area
+ * ISA_IO_BASE = KERN_IO_START, 64K reserved area
* PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
* IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
*/
+#define KERN_IO_START (KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))
#define FULL_IO_SIZE 0x80000000ul
-#define ISA_IO_BASE (VMALLOC_END)
-#define ISA_IO_END (VMALLOC_END + 0x10000ul)
+#define ISA_IO_BASE (KERN_IO_START)
+#define ISA_IO_END (KERN_IO_START + 0x10000ul)
#define PHB_IO_BASE (ISA_IO_END)
-#define PHB_IO_END (VMALLOC_END + FULL_IO_SIZE)
+#define PHB_IO_END (KERN_IO_START + FULL_IO_SIZE)
#define IOREMAP_BASE (PHB_IO_END)
-#define IOREMAP_END (VMALLOC_START + PGTABLE_RANGE)
+#define IOREMAP_END (KERN_VIRT_START + KERN_VIRT_SIZE)
+
/*
* Region IDs
@@ -68,23 +84,32 @@
#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START))
#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET))
-#define VMEMMAP_REGION_ID (0xfUL)
+#define VMEMMAP_REGION_ID (0xfUL) /* Server only */
#define USER_REGION_ID (0UL)
/*
- * Defines the address of the vmemap area, in its own region
+ * Defines the address of the vmemap area, in its own region on
+ * hash table CPUs and after the vmalloc space on Book3E
*/
+#ifdef CONFIG_PPC_BOOK3E
+#define VMEMMAP_BASE VMALLOC_END
+#define VMEMMAP_END KERN_IO_START
+#else
#define VMEMMAP_BASE (VMEMMAP_REGION_ID << REGION_SHIFT)
+#endif
#define vmemmap ((struct page *)VMEMMAP_BASE)
/*
* Include the PTE bits definitions
*/
+#ifdef CONFIG_PPC_BOOK3S
#include <asm/pte-hash64.h>
+#else
+#include <asm/pte-book3e.h>
+#endif
#include <asm/pte-common.h>
-
#ifdef CONFIG_PPC_MM_SLICES
#define HAVE_ARCH_UNMAPPED_AREA
#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
@@ -92,6 +117,9 @@
#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <asm/tlbflush.h>
+
/*
* This is the default implementation of various PTE accessors, it's
* used in all cases except Book3S with 64K pages where we have a
@@ -285,8 +313,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
{
unsigned long bits = pte_val(entry) &
- (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW |
- _PAGE_EXEC | _PAGE_HWEXEC);
+ (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
#ifdef PTE_ATOMIC_UPDATES
unsigned long old, tmp;
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index d6a616a1b3e..ccc68b50d05 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -27,10 +27,22 @@ extern perf_irq_t perf_irq;
int reserve_pmc_hardware(perf_irq_t new_perf_irq);
void release_pmc_hardware(void);
+void ppc_enable_pmcs(void);
#ifdef CONFIG_PPC64
-void power4_enable_pmcs(void);
-void pasemi_enable_pmcs(void);
+#include <asm/lppaca.h>
+
+static inline void ppc_set_pmu_inuse(int inuse)
+{
+ get_lppaca()->pmcregs_in_use = inuse;
+}
+
+extern void power4_enable_pmcs(void);
+
+#else /* CONFIG_PPC64 */
+
+static inline void ppc_set_pmu_inuse(int inuse) { }
+
#endif
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index b74f16d45cb..ef9aa84cac5 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -48,6 +48,8 @@
#define PPC_INST_TLBIE 0x7c000264
#define PPC_INST_TLBILX 0x7c000024
#define PPC_INST_WAIT 0x7c00007c
+#define PPC_INST_TLBIVAX 0x7c000624
+#define PPC_INST_TLBSRX_DOT 0x7c0006a5
/* macros to insert fields into opcodes */
#define __PPC_RA(a) (((a) & 0x1f) << 16)
@@ -76,6 +78,10 @@
__PPC_WC(w))
#define PPC_TLBIE(lp,a) stringify_in_c(.long PPC_INST_TLBIE | \
__PPC_RB(a) | __PPC_RS(lp))
+#define PPC_TLBSRX_DOT(a,b) stringify_in_c(.long PPC_INST_TLBSRX_DOT | \
+ __PPC_RA(a) | __PPC_RB(b))
+#define PPC_TLBIVAX(a,b) stringify_in_c(.long PPC_INST_TLBIVAX | \
+ __PPC_RA(a) | __PPC_RB(b))
/*
* Define what the VSX XX1 form instructions will look like, then add
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 854ab713f56..2828f9d0f66 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -39,7 +39,6 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
extern void pci_devs_phb_init(void);
extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
-extern void scan_phb(struct pci_controller *hose);
/* From rtas_pci.h */
extern void init_pci_config_tokens (void);
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index f9729529c20..498fe09263d 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -98,13 +98,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \
#define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base)
#define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base)
-#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base
+#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,base,b
#define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
#define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
#define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
#define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
#define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
-#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,base,b
#define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base)
#define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
#define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
@@ -112,26 +112,26 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \
#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
/* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base)
+#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,base,b)
#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
+#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,base,b)
#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base)
#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base)
+#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,base,b)
#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
+#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,base,b)
#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
@@ -375,8 +375,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
#define PPC440EP_ERR42
#endif
-
-#if defined(CONFIG_BOOKE)
+/*
+ * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them
+ * keep the address intact to be compatible with code shared with
+ * 32-bit classic.
+ *
+ * On the other hand, I find it useful to have them behave as expected
+ * by their name (ie always do the addition) on 64-bit BookE
+ */
+#if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64)
#define toreal(rd)
#define fromreal(rd)
@@ -426,10 +433,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
.previous
#endif
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
#define RFI rfid
#define MTMSRD(r) mtmsrd r
-
#else
#define FIX_SRR1(ra, rb)
#ifndef CONFIG_40x
diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h
index 07630faae02..6c3e1f4378d 100644
--- a/arch/powerpc/include/asm/pte-40x.h
+++ b/arch/powerpc/include/asm/pte-40x.h
@@ -46,7 +46,7 @@
#define _PAGE_RW 0x040 /* software: Writes permitted */
#define _PAGE_DIRTY 0x080 /* software: dirty page */
#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
+#define _PAGE_EXEC 0x200 /* hardware: EX permission */
#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/pte-44x.h
index 37e98bcf83e..4192b9bad90 100644
--- a/arch/powerpc/include/asm/pte-44x.h
+++ b/arch/powerpc/include/asm/pte-44x.h
@@ -78,7 +78,7 @@
#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
#define _PAGE_RW 0x00000002 /* S: Write permission */
#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
-#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */
+#define _PAGE_EXEC 0x00000004 /* H: Execute permission */
#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */
#define _PAGE_SPECIAL 0x00000020 /* S: Special page */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
index 8c6e3125103..94e979718dc 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -36,7 +36,6 @@
/* These five software bits must be masked out when the entry is loaded
* into the TLB.
*/
-#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
#define _PAGE_GUARDED 0x0010 /* software: guarded access */
#define _PAGE_DIRTY 0x0020 /* software: page changed */
#define _PAGE_RW 0x0040 /* software: user write access allowed */
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
new file mode 100644
index 00000000000..082d515930a
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -0,0 +1,84 @@
+#ifndef _ASM_POWERPC_PTE_BOOK3E_H
+#define _ASM_POWERPC_PTE_BOOK3E_H
+#ifdef __KERNEL__
+
+/* PTE bit definitions for processors compliant to the Book3E
+ * architecture 2.06 or later. The position of the PTE bits
+ * matches the HW definition of the optional Embedded Page Table
+ * category.
+ */
+
+/* Architected bits */
+#define _PAGE_PRESENT 0x000001 /* software: pte contains a translation */
+#define _PAGE_FILE 0x000002 /* (!present only) software: pte holds file offset */
+#define _PAGE_SW1 0x000002
+#define _PAGE_BAP_SR 0x000004
+#define _PAGE_BAP_UR 0x000008
+#define _PAGE_BAP_SW 0x000010
+#define _PAGE_BAP_UW 0x000020
+#define _PAGE_BAP_SX 0x000040
+#define _PAGE_BAP_UX 0x000080
+#define _PAGE_PSIZE_MSK 0x000f00
+#define _PAGE_PSIZE_4K 0x000200
+#define _PAGE_PSIZE_8K 0x000300
+#define _PAGE_PSIZE_16K 0x000400
+#define _PAGE_PSIZE_32K 0x000500
+#define _PAGE_PSIZE_64K 0x000600
+#define _PAGE_PSIZE_128K 0x000700
+#define _PAGE_PSIZE_256K 0x000800
+#define _PAGE_PSIZE_512K 0x000900
+#define _PAGE_PSIZE_1M 0x000a00
+#define _PAGE_PSIZE_2M 0x000b00
+#define _PAGE_PSIZE_4M 0x000c00
+#define _PAGE_PSIZE_8M 0x000d00
+#define _PAGE_PSIZE_16M 0x000e00
+#define _PAGE_PSIZE_32M 0x000f00
+#define _PAGE_DIRTY 0x001000 /* C: page changed */
+#define _PAGE_SW0 0x002000
+#define _PAGE_U3 0x004000
+#define _PAGE_U2 0x008000
+#define _PAGE_U1 0x010000
+#define _PAGE_U0 0x020000
+#define _PAGE_ACCESSED 0x040000
+#define _PAGE_LENDIAN 0x080000
+#define _PAGE_GUARDED 0x100000
+#define _PAGE_COHERENT 0x200000 /* M: enforce memory coherence */
+#define _PAGE_NO_CACHE 0x400000 /* I: cache inhibit */
+#define _PAGE_WRITETHRU 0x800000 /* W: cache write-through */
+
+/* "Higher level" linux bit combinations */
+#define _PAGE_EXEC _PAGE_BAP_UX /* .. and was cache cleaned */
+#define _PAGE_RW (_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */
+#define _PAGE_KERNEL_RW (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY)
+#define _PAGE_KERNEL_RO (_PAGE_BAP_SR)
+#define _PAGE_KERNEL_RWX (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY | _PAGE_BAP_SX)
+#define _PAGE_KERNEL_ROX (_PAGE_BAP_SR | _PAGE_BAP_SX)
+#define _PAGE_USER (_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */
+
+#define _PAGE_HASHPTE 0
+#define _PAGE_BUSY 0
+
+#define _PAGE_SPECIAL _PAGE_SW0
+
+/* Flags to be preserved on PTE modifications */
+#define _PAGE_HPTEFLAGS _PAGE_BUSY
+
+/* Base page size */
+#ifdef CONFIG_PPC_64K_PAGES
+#define _PAGE_PSIZE _PAGE_PSIZE_64K
+#define PTE_RPN_SHIFT (28)
+#else
+#define _PAGE_PSIZE _PAGE_PSIZE_4K
+#define PTE_RPN_SHIFT (24)
+#endif
+
+/* On 32-bit, we never clear the top part of the PTE */
+#ifdef CONFIG_PPC32
+#define _PTE_NONE_MASK 0xffffffff00000000ULL
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_FSL_BOOKE_H */
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index a7e210b6b48..c3b65076a26 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -13,9 +13,6 @@
#ifndef _PAGE_HWWRITE
#define _PAGE_HWWRITE 0
#endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC 0
-#endif
#ifndef _PAGE_EXEC
#define _PAGE_EXEC 0
#endif
@@ -34,6 +31,9 @@
#ifndef _PAGE_4K_PFN
#define _PAGE_4K_PFN 0
#endif
+#ifndef _PAGE_SAO
+#define _PAGE_SAO 0
+#endif
#ifndef _PAGE_PSIZE
#define _PAGE_PSIZE 0
#endif
@@ -45,10 +45,16 @@
#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
#endif
#ifndef _PAGE_KERNEL_RO
-#define _PAGE_KERNEL_RO 0
+#define _PAGE_KERNEL_RO 0
+#endif
+#ifndef _PAGE_KERNEL_ROX
+#define _PAGE_KERNEL_ROX (_PAGE_EXEC)
#endif
#ifndef _PAGE_KERNEL_RW
-#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+#endif
+#ifndef _PAGE_KERNEL_RWX
+#define _PAGE_KERNEL_RWX (_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE | _PAGE_EXEC)
#endif
#ifndef _PAGE_HPTEFLAGS
#define _PAGE_HPTEFLAGS _PAGE_HASHPTE
@@ -93,8 +99,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
_PAGE_WRITETHRU | _PAGE_ENDIAN | _PAGE_4K_PFN | \
_PAGE_USER | _PAGE_ACCESSED | \
- _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
- _PAGE_EXEC | _PAGE_HWEXEC)
+ _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC)
/*
* We define 2 sets of base prot bits, one for basic pages (ie,
@@ -151,11 +156,9 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
_PAGE_NO_CACHE)
#define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
_PAGE_NO_CACHE | _PAGE_GUARDED)
-#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC | \
- _PAGE_HWEXEC)
+#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX)
#define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
-#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC | \
- _PAGE_HWEXEC)
+#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX)
/* Protection used for kernel text. We want the debuggers to be able to
* set breakpoints anywhere, so don't write protect the kernel text
diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h
index 10820f58acf..2c12be5f677 100644
--- a/arch/powerpc/include/asm/pte-fsl-booke.h
+++ b/arch/powerpc/include/asm/pte-fsl-booke.h
@@ -23,7 +23,7 @@
#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
#define _PAGE_RW 0x00004 /* S: Write permission (SW) */
#define _PAGE_DIRTY 0x00008 /* S: Page dirty */
-#define _PAGE_HWEXEC 0x00010 /* H: SX permission */
+#define _PAGE_EXEC 0x00010 /* H: SX permission */
#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */
#define _PAGE_ENDIAN 0x00040 /* H: E bit */
@@ -33,13 +33,6 @@
#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
#define _PAGE_SPECIAL 0x00800 /* S: Special page */
-#ifdef CONFIG_PTE_64BIT
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK 0xffffffffffff0000ULL
-/* We extend the size of the PTE flags area when using 64-bit PTEs */
-#define PTE_RPN_SHIFT (PAGE_SHIFT + 8)
-#endif
-
#define _PMD_PRESENT 0
#define _PMD_PRESENT_MASK (PAGE_MASK)
#define _PMD_BAD (~PAGE_MASK)
diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/pte-hash32.h
index 16e571c7f9e..4aad4132d0a 100644
--- a/arch/powerpc/include/asm/pte-hash32.h
+++ b/arch/powerpc/include/asm/pte-hash32.h
@@ -26,7 +26,6 @@
#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
#define _PAGE_DIRTY 0x080 /* C: page changed */
#define _PAGE_ACCESSED 0x100 /* R: page referenced */
-#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
#define _PAGE_RW 0x400 /* software: user write access allowed */
#define _PAGE_SPECIAL 0x800 /* software: Special page */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 1170267736d..6315edc205d 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -98,19 +98,15 @@
#define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */
#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC_BOOK3S_64)
+/* Server variant */
#define MSR_ MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
#define MSR_KERNEL MSR_ | MSR_SF
-
#define MSR_USER32 MSR_ | MSR_PR | MSR_EE
#define MSR_USER64 MSR_USER32 | MSR_SF
-
-#else /* 32-bit */
+#elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx)
/* Default MSR for kernel mode. */
-#ifndef MSR_KERNEL /* reg_booke.h also defines this */
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
-#endif
-
#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
#endif
@@ -646,6 +642,137 @@
#endif
/*
+ * SPRG usage:
+ *
+ * All 64-bit:
+ * - SPRG1 stores PACA pointer
+ *
+ * 64-bit server:
+ * - SPRG0 unused (reserved for HV on Power4)
+ * - SPRG2 scratch for exception vectors
+ * - SPRG3 unused (user visible)
+ *
+ * 64-bit embedded
+ * - SPRG0 generic exception scratch
+ * - SPRG2 TLB exception stack
+ * - SPRG3 unused (user visible)
+ * - SPRG4 unused (user visible)
+ * - SPRG6 TLB miss scratch (user visible, sorry !)
+ * - SPRG7 critical exception scratch
+ * - SPRG8 machine check exception scratch
+ * - SPRG9 debug exception scratch
+ *
+ * All 32-bit:
+ * - SPRG3 current thread_info pointer
+ * (virtual on BookE, physical on others)
+ *
+ * 32-bit classic:
+ * - SPRG0 scratch for exception vectors
+ * - SPRG1 scratch for exception vectors
+ * - SPRG2 indicator that we are in RTAS
+ * - SPRG4 (603 only) pseudo TLB LRU data
+ *
+ * 32-bit 40x:
+ * - SPRG0 scratch for exception vectors
+ * - SPRG1 scratch for exception vectors
+ * - SPRG2 scratch for exception vectors
+ * - SPRG4 scratch for exception vectors (not 403)
+ * - SPRG5 scratch for exception vectors (not 403)
+ * - SPRG6 scratch for exception vectors (not 403)
+ * - SPRG7 scratch for exception vectors (not 403)
+ *
+ * 32-bit 440 and FSL BookE:
+ * - SPRG0 scratch for exception vectors
+ * - SPRG1 scratch for exception vectors (*)
+ * - SPRG2 scratch for crit interrupts handler
+ * - SPRG4 scratch for exception vectors
+ * - SPRG5 scratch for exception vectors
+ * - SPRG6 scratch for machine check handler
+ * - SPRG7 scratch for exception vectors
+ * - SPRG9 scratch for debug vectors (e500 only)
+ *
+ * Additionally, BookE separates "read" and "write"
+ * of those registers. That allows to use the userspace
+ * readable variant for reads, which can avoid a fault
+ * with KVM type virtualization.
+ *
+ * (*) Under KVM, the host SPRG1 is used to point to
+ * the current VCPU data structure
+ *
+ * 32-bit 8xx:
+ * - SPRG0 scratch for exception vectors
+ * - SPRG1 scratch for exception vectors
+ * - SPRG2 apparently unused but initialized
+ *
+ */
+#ifdef CONFIG_PPC64
+#define SPRN_SPRG_PACA SPRN_SPRG1
+#else
+#define SPRN_SPRG_THREAD SPRN_SPRG3
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_64
+#define SPRN_SPRG_SCRATCH0 SPRN_SPRG2
+#endif
+
+#ifdef CONFIG_PPC_BOOK3E_64
+#define SPRN_SPRG_MC_SCRATCH SPRN_SPRG8
+#define SPRN_SPRG_CRIT_SCRATCH SPRN_SPRG7
+#define SPRN_SPRG_DBG_SCRATCH SPRN_SPRG9
+#define SPRN_SPRG_TLB_EXFRAME SPRN_SPRG2
+#define SPRN_SPRG_TLB_SCRATCH SPRN_SPRG6
+#define SPRN_SPRG_GEN_SCRATCH SPRN_SPRG0
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_32
+#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1
+#define SPRN_SPRG_RTAS SPRN_SPRG2
+#define SPRN_SPRG_603_LRU SPRN_SPRG4
+#endif
+
+#ifdef CONFIG_40x
+#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1
+#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2
+#define SPRN_SPRG_SCRATCH3 SPRN_SPRG4
+#define SPRN_SPRG_SCRATCH4 SPRN_SPRG5
+#define SPRN_SPRG_SCRATCH5 SPRN_SPRG6
+#define SPRN_SPRG_SCRATCH6 SPRN_SPRG7
+#endif
+
+#ifdef CONFIG_BOOKE
+#define SPRN_SPRG_RSCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_WSCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_RSCRATCH1 SPRN_SPRG1
+#define SPRN_SPRG_WSCRATCH1 SPRN_SPRG1
+#define SPRN_SPRG_RSCRATCH_CRIT SPRN_SPRG2
+#define SPRN_SPRG_WSCRATCH_CRIT SPRN_SPRG2
+#define SPRN_SPRG_RSCRATCH2 SPRN_SPRG4R
+#define SPRN_SPRG_WSCRATCH2 SPRN_SPRG4W
+#define SPRN_SPRG_RSCRATCH3 SPRN_SPRG5R
+#define SPRN_SPRG_WSCRATCH3 SPRN_SPRG5W
+#define SPRN_SPRG_RSCRATCH_MC SPRN_SPRG6R
+#define SPRN_SPRG_WSCRATCH_MC SPRN_SPRG6W
+#define SPRN_SPRG_RSCRATCH4 SPRN_SPRG7R
+#define SPRN_SPRG_WSCRATCH4 SPRN_SPRG7W
+#ifdef CONFIG_E200
+#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG6R
+#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG6W
+#else
+#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG9
+#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG9
+#endif
+#define SPRN_SPRG_RVCPU SPRN_SPRG1
+#define SPRN_SPRG_WVCPU SPRN_SPRG1
+#endif
+
+#ifdef CONFIG_8xx
+#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1
+#endif
+
+/*
* An mtfsf instruction with the L bit set. On CPUs that support this a
* full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
*
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 6bcf364cbb2..3bf78350552 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -18,18 +18,26 @@
#define MSR_IS MSR_IR /* Instruction Space */
#define MSR_DS MSR_DR /* Data Space */
#define MSR_PMM (1<<2) /* Performance monitor mark bit */
+#define MSR_CM (1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */
-/* Default MSR for kernel mode. */
-#if defined (CONFIG_40x)
+#if defined(CONFIG_PPC_BOOK3E_64)
+#define MSR_ MSR_ME | MSR_CE
+#define MSR_KERNEL MSR_ | MSR_CM
+#define MSR_USER32 MSR_ | MSR_PR | MSR_EE
+#define MSR_USER64 MSR_USER32 | MSR_CM
+#elif defined (CONFIG_40x)
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
-#elif defined(CONFIG_BOOKE)
+#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
+#else
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE)
+#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
#endif
/* Special Purpose Registers (SPRNs)*/
#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
+#define SPRN_SPRG3R 0x103 /* Special Purpose Register General 3 Read */
#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
@@ -38,11 +46,18 @@
#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
+#define SPRN_EPCR 0x133 /* Embedded Processor Control Register */
#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */
#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
+#define SPRN_MAS8 0x155 /* MMU Assist Register 8 */
+#define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */
+#define SPRN_MAS5_MAS6 0x15c /* MMU Assist Register 5 || 6 */
+#define SPRN_MAS8_MAS1 0x15d /* MMU Assist Register 8 || 1 */
+#define SPRN_MAS7_MAS3 0x174 /* MMU Assist Register 7 || 3 */
+#define SPRN_MAS0_MAS1 0x175 /* MMU Assist Register 0 || 1 */
#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */
#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */
@@ -93,6 +108,8 @@
#define SPRN_PID2 0x27A /* Process ID Register 2 */
#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */
#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */
+#define SPRN_TLB2CFG 0x2B2 /* TLB 2 Config Register */
+#define SPRN_TLB3CFG 0x2B3 /* TLB 3 Config Register */
#define SPRN_EPR 0x2BE /* External Proxy Register */
#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */
#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */
@@ -415,16 +432,31 @@
#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
-/* Bit definitions for MMUCSR0 */
-#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */
-#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */
-#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */
-#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */
-
/* Bit definitions for SGR. */
#define SGR_NORMAL 0 /* Speculative fetching allowed. */
#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
+/* Bit definitions for EPCR */
+#define SPRN_EPCR_EXTGS 0x80000000 /* External Input interrupt
+ * directed to Guest state */
+#define SPRN_EPCR_DTLBGS 0x40000000 /* Data TLB Error interrupt
+ * directed to guest state */
+#define SPRN_EPCR_ITLBGS 0x20000000 /* Instr. TLB error interrupt
+ * directed to guest state */
+#define SPRN_EPCR_DSIGS 0x10000000 /* Data Storage interrupt
+ * directed to guest state */
+#define SPRN_EPCR_ISIGS 0x08000000 /* Instr. Storage interrupt
+ * directed to guest state */
+#define SPRN_EPCR_DUVD 0x04000000 /* Disable Hypervisor Debug */
+#define SPRN_EPCR_ICM 0x02000000 /* Interrupt computation mode
+ * (copied to MSR:CM on intr) */
+#define SPRN_EPCR_GICM 0x01000000 /* Guest Interrupt Comp. mode */
+#define SPRN_EPCR_DGTMI 0x00800000 /* Disable TLB Guest Management
+ * instructions */
+#define SPRN_EPCR_DMIUH 0x00400000 /* Disable MAS Interrupt updates
+ * for hypervisor */
+
+
/*
* The IBM-403 is an even more odd special case, as it is much
* older than the IBM-405 series. We put these down here incase someone
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index 817fac0a071..dae19342f0b 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -1,6 +1,6 @@
#ifndef _ASM_POWERPC_SETUP_H
#define _ASM_POWERPC_SETUP_H
-#define COMMAND_LINE_SIZE 512
+#include <asm-generic/setup.h>
#endif /* _ASM_POWERPC_SETUP_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index c25f73d1d84..c0d3b8af931 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -148,6 +148,16 @@ extern struct smp_ops_t *smp_ops;
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi(cpumask_t mask);
+/* Definitions relative to the secondary CPU spin loop
+ * and entry point. Not all of them exist on both 32 and
+ * 64-bit but defining them all here doesn't harm
+ */
+extern void generic_secondary_smp_init(void);
+extern void generic_secondary_thread_init(void);
+extern unsigned long __secondary_hold_spinloop;
+extern unsigned long __secondary_hold_acknowledge;
+extern char __secondary_hold;
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index 30891d6e2bc..8979d4cd3d7 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -13,15 +13,13 @@
#include <linux/swiotlb.h>
-extern struct dma_mapping_ops swiotlb_dma_ops;
-extern struct dma_mapping_ops swiotlb_pci_dma_ops;
-
-int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t,
- size_t size);
+extern struct dma_map_ops swiotlb_dma_ops;
static inline void dma_mark_clean(void *addr, size_t size) {}
extern unsigned int ppc_swiotlb_enable;
int __init swiotlb_setup_bus_notifier(void);
+extern void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev);
+
#endif /* __ASM_SWIOTLB_H */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 370600ca276..ed24bd92fe4 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -95,8 +95,8 @@ SYSCALL(reboot)
SYSX(sys_ni_syscall,compat_sys_old_readdir,sys_old_readdir)
SYSCALL_SPU(mmap)
SYSCALL_SPU(munmap)
-SYSCALL_SPU(truncate)
-SYSCALL_SPU(ftruncate)
+COMPAT_SYS_SPU(truncate)
+COMPAT_SYS_SPU(ftruncate)
SYSCALL_SPU(fchmod)
SYSCALL_SPU(fchown)
COMPAT_SYS_SPU(getpriority)
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index e20ff7541f3..e2b428b0f7b 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -25,57 +25,25 @@
#include <linux/pagemap.h>
-struct mmu_gather;
-
#define tlb_start_vma(tlb, vma) do { } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
-#if !defined(CONFIG_PPC_STD_MMU)
-
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
-#elif defined(__powerpc64__)
-
-extern void pte_free_finish(void);
-
-static inline void tlb_flush(struct mmu_gather *tlb)
-{
- struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
-
- /* If there's a TLB batch pending, then we must flush it because the
- * pages are going to be freed and we really don't want to have a CPU
- * access a freed page because it has a stale TLB
- */
- if (tlbbatch->index)
- __flush_tlb_pending(tlbbatch);
-
- pte_free_finish();
-}
-
-#else
-
extern void tlb_flush(struct mmu_gather *tlb);
-#endif
-
/* Get the generic bits... */
#include <asm-generic/tlb.h>
-#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
-
-#else
extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
unsigned long address);
static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
- unsigned long address)
+ unsigned long address)
{
+#ifdef CONFIG_PPC_STD_MMU_32
if (pte_val(*ptep) & _PAGE_HASHPTE)
flush_hash_entry(tlb->mm, ptep, address);
+#endif
}
-#endif
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_TLB_H */
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index abbe3419d1d..d50a380b2b6 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -6,7 +6,7 @@
*
* - flush_tlb_mm(mm) flushes the specified mm context TLB's
* - flush_tlb_page(vma, vmaddr) flushes one page
- * - local_flush_tlb_mm(mm) flushes the specified mm context on
+ * - local_flush_tlb_mm(mm, full) flushes the specified mm context on
* the local processor
* - local_flush_tlb_page(vma, vmaddr) flushes one page on the local processor
* - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
@@ -29,7 +29,8 @@
* specific tlbie's
*/
-#include <linux/mm.h>
+struct vm_area_struct;
+struct mm_struct;
#define MMU_NO_CONTEXT ((unsigned int)-1)
@@ -40,12 +41,18 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
extern void local_flush_tlb_mm(struct mm_struct *mm);
extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+ int tsize, int ind);
+
#ifdef CONFIG_SMP
extern void flush_tlb_mm(struct mm_struct *mm);
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+ int tsize, int ind);
#else
#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
#define flush_tlb_page(vma,addr) local_flush_tlb_page(vma,addr)
+#define __flush_tlb_page(mm,addr,p,i) __local_flush_tlb_page(mm,addr,p,i)
#endif
#define flush_tlb_page_nohash(vma,addr) flush_tlb_page(vma,addr)
diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
index 26fc449bd98..dc0419b66f1 100644
--- a/arch/powerpc/include/asm/vdso.h
+++ b/arch/powerpc/include/asm/vdso.h
@@ -7,9 +7,8 @@
#define VDSO32_LBASE 0x100000
#define VDSO64_LBASE 0x100000
-/* Default map addresses */
+/* Default map addresses for 32bit vDSO */
#define VDSO32_MBASE VDSO32_LBASE
-#define VDSO64_MBASE VDSO64_LBASE
#define VDSO_VERSION_STRING LINUX_2.6.15
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 9619285f64e..569f79ccd31 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -33,10 +33,10 @@ obj-y := cputable.o ptrace.o syscalls.o \
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
signal_64.o ptrace32.o \
- paca.o cpu_setup_ppc970.o \
- cpu_setup_pa6t.o \
- firmware.o nvram_64.o
+ paca.o nvram_64.o firmware.o
+obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
+obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
@@ -63,8 +63,8 @@ obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x) += cpu_setup_44x.o
obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o
-extra-$(CONFIG_PPC_STD_MMU) := head_32.o
-extra-$(CONFIG_PPC64) := head_64.o
+extra-y := head_$(CONFIG_WORD_SIZE).o
+extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o
extra-$(CONFIG_40x) := head_40x.o
extra-$(CONFIG_44x) := head_44x.o
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
@@ -88,7 +88,7 @@ obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
- pci-common.o
+ pci-common.o pci_of_scan.o
obj-$(CONFIG_PCI_MSI) += msi.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
machine_kexec_$(CONFIG_WORD_SIZE).o
@@ -115,6 +115,13 @@ ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
obj-y += ppc_save_regs.o
endif
+# Disable GCOV in odd or sensitive code
+GCOV_PROFILE_prom_init.o := n
+GCOV_PROFILE_ftrace.o := n
+GCOV_PROFILE_machine_kexec_64.o := n
+GCOV_PROFILE_machine_kexec_32.o := n
+GCOV_PROFILE_kprobes.o := n
+
extra-$(CONFIG_PPC_FPU) += fpu.o
extra-$(CONFIG_ALTIVEC) += vector.o
extra-$(CONFIG_PPC64) += entry_64.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 197b15646ee..f0df285f0f8 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -52,9 +52,11 @@
#include <linux/kvm_host.h>
#endif
+#ifdef CONFIG_PPC32
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
#include "head_booke.h"
#endif
+#endif
#if defined(CONFIG_FSL_BOOKE)
#include "../mm/mmu_decl.h"
@@ -140,6 +142,20 @@ int main(void)
context.high_slices_psize));
DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def));
#endif /* CONFIG_PPC_MM_SLICES */
+
+#ifdef CONFIG_PPC_BOOK3E
+ DEFINE(PACAPGD, offsetof(struct paca_struct, pgd));
+ DEFINE(PACA_KERNELPGD, offsetof(struct paca_struct, kernel_pgd));
+ DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
+ DEFINE(PACA_EXTLB, offsetof(struct paca_struct, extlb));
+ DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
+ DEFINE(PACA_EXCRIT, offsetof(struct paca_struct, excrit));
+ DEFINE(PACA_EXDBG, offsetof(struct paca_struct, exdbg));
+ DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack));
+ DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack));
+ DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack));
+#endif /* CONFIG_PPC_BOOK3E */
+
#ifdef CONFIG_PPC_STD_MMU_64
DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
@@ -262,6 +278,7 @@ int main(void)
DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
#endif /* CONFIG_PPC64 */
+#if defined(CONFIG_PPC32)
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
@@ -280,7 +297,7 @@ int main(void)
DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit));
#endif
-
+#endif
DEFINE(CLONE_VM, CLONE_VM);
DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index 1e9949e6885..55cba4a8a95 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -21,7 +21,7 @@ _GLOBAL(__setup_cpu_603)
mflr r4
BEGIN_MMU_FTR_SECTION
li r10,0
- mtspr SPRN_SPRG4,r10 /* init SW LRU tracking */
+ mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */
END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
BEGIN_FTR_SECTION
bl __init_fpu_registers
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 4a24a2fc457..0b9c9135922 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -89,11 +89,15 @@ extern void __restore_cpu_power7(void);
#define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_HAS_ALTIVEC_COMP)
+#ifdef CONFIG_PPC_BOOK3E_64
+#define COMMON_USER_BOOKE (COMMON_USER_PPC64 | PPC_FEATURE_BOOKE)
+#else
#define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
PPC_FEATURE_BOOKE)
+#endif
static struct cpu_spec __initdata cpu_specs[] = {
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
{ /* Power3 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00400000,
@@ -508,7 +512,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_generic,
.platform = "power4",
}
-#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
#ifdef CONFIG_PPC32
#if CLASSIC_PPC
{ /* 601 */
@@ -1630,7 +1635,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.platform = "ppc440",
},
{ /* 460EX */
- .pvr_mask = 0xffff0002,
+ .pvr_mask = 0xffff0006,
.pvr_value = 0x13020002,
.cpu_name = "460EX",
.cpu_features = CPU_FTRS_440x6,
@@ -1642,8 +1647,21 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_440A,
.platform = "ppc440",
},
+ { /* 460EX Rev B */
+ .pvr_mask = 0xffff0007,
+ .pvr_value = 0x13020004,
+ .cpu_name = "460EX Rev. B",
+ .cpu_features = CPU_FTRS_440x6,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460ex,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
{ /* 460GT */
- .pvr_mask = 0xffff0002,
+ .pvr_mask = 0xffff0006,
.pvr_value = 0x13020000,
.cpu_name = "460GT",
.cpu_features = CPU_FTRS_440x6,
@@ -1655,6 +1673,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_440A,
.platform = "ppc440",
},
+ { /* 460GT Rev B */
+ .pvr_mask = 0xffff0007,
+ .pvr_value = 0x13020005,
+ .cpu_name = "460GT Rev. B",
+ .cpu_features = CPU_FTRS_440x6,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460gt,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
{ /* 460SX */
.pvr_mask = 0xffffff00,
.pvr_value = 0x13541800,
@@ -1797,6 +1828,29 @@ static struct cpu_spec __initdata cpu_specs[] = {
}
#endif /* CONFIG_E500 */
#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC_BOOK3E_64
+ { /* This is a default entry to get going, to be replaced by
+ * a real one at some stage
+ */
+#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
+ CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
+ .pvr_mask = 0x00000000,
+ .pvr_value = 0x00000000,
+ .cpu_name = "Book3E",
+ .cpu_features = CPU_FTRS_BASE_BOOK3E,
+ .cpu_user_features = COMMON_USER_PPC64,
+ .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
+ MMU_FTR_USE_TLBIVAX_BCAST |
+ MMU_FTR_LOCK_BCAST_INVAL,
+ .icache_bsize = 64,
+ .dcache_bsize = 64,
+ .num_pmcs = 0,
+ .machine_check = machine_check_generic,
+ .platform = "power6",
+ },
+#endif
};
static struct cpu_spec the_cpu_spec;
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 2983adac8cc..87ddb3fb948 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -89,7 +89,7 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
return 1;
}
-struct dma_mapping_ops dma_iommu_ops = {
+struct dma_map_ops dma_iommu_ops = {
.alloc_coherent = dma_iommu_alloc_coherent,
.free_coherent = dma_iommu_free_coherent,
.map_sg = dma_iommu_map_sg,
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index e8a57de85bc..e96cbbd9b44 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -25,33 +25,13 @@ int swiotlb __read_mostly;
unsigned int ppc_swiotlb_enable;
/*
- * Determine if an address is reachable by a pci device, or if we must bounce.
- */
-static int
-swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
-{
- dma_addr_t max;
- struct pci_controller *hose;
- struct pci_dev *pdev = to_pci_dev(hwdev);
-
- hose = pci_bus_to_host(pdev->bus);
- max = hose->dma_window_base_cur + hose->dma_window_size;
-
- /* check that we're within mapped pci window space */
- if ((addr + size > max) | (addr < hose->dma_window_base_cur))
- return 1;
-
- return 0;
-}
-
-/*
* At the moment, all platforms that use this code only require
* swiotlb to be used if we're operating on HIGHMEM. Since
* we don't ever call anything other than map_sg, unmap_sg,
* map_page, and unmap_page on highmem, use normal dma_ops
* for everything else.
*/
-struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_map_ops swiotlb_dma_ops = {
.alloc_coherent = dma_direct_alloc_coherent,
.free_coherent = dma_direct_free_coherent,
.map_sg = swiotlb_map_sg_attrs,
@@ -62,33 +42,34 @@ struct dma_mapping_ops swiotlb_dma_ops = {
.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
- .sync_sg_for_device = swiotlb_sync_sg_for_device
+ .sync_sg_for_device = swiotlb_sync_sg_for_device,
+ .mapping_error = swiotlb_dma_mapping_error,
};
-struct dma_mapping_ops swiotlb_pci_dma_ops = {
- .alloc_coherent = dma_direct_alloc_coherent,
- .free_coherent = dma_direct_free_coherent,
- .map_sg = swiotlb_map_sg_attrs,
- .unmap_sg = swiotlb_unmap_sg_attrs,
- .dma_supported = swiotlb_dma_supported,
- .map_page = swiotlb_map_page,
- .unmap_page = swiotlb_unmap_page,
- .addr_needs_map = swiotlb_pci_addr_needs_map,
- .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
- .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
- .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
- .sync_sg_for_device = swiotlb_sync_sg_for_device
-};
+void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
+{
+ struct pci_controller *hose;
+ struct dev_archdata *sd;
+
+ hose = pci_bus_to_host(pdev->bus);
+ sd = &pdev->dev.archdata;
+ sd->max_direct_dma_addr =
+ hose->dma_window_base_cur + hose->dma_window_size;
+}
static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
+ struct dev_archdata *sd;
/* We are only intereted in device addition */
if (action != BUS_NOTIFY_ADD_DEVICE)
return 0;
+ sd = &dev->archdata;
+ sd->max_direct_dma_addr = 0;
+
/* May need to bounce if the device can't address all of DRAM */
if (dma_get_mask(dev) < lmb_end_of_DRAM())
set_dma_ops(dev, &swiotlb_dma_ops);
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index ccf129d47d8..21b784d7e7d 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -7,6 +7,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
#include <linux/lmb.h>
#include <asm/bug.h>
#include <asm/abs_addr.h>
@@ -140,7 +141,7 @@ static inline void dma_direct_sync_single_range(struct device *dev,
}
#endif
-struct dma_mapping_ops dma_direct_ops = {
+struct dma_map_ops dma_direct_ops = {
.alloc_coherent = dma_direct_alloc_coherent,
.free_coherent = dma_direct_free_coherent,
.map_sg = dma_direct_map_sg,
@@ -156,3 +157,13 @@ struct dma_mapping_ops dma_direct_ops = {
#endif
};
EXPORT_SYMBOL(dma_direct_ops);
+
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+ return 0;
+}
+fs_initcall(dma_init);
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 3cadba60a4b..1175a8539e6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -88,7 +88,7 @@ crit_transfer_to_handler:
mfspr r0,SPRN_SRR1
stw r0,_SRR1(r11)
- mfspr r8,SPRN_SPRG3
+ mfspr r8,SPRN_SPRG_THREAD
lwz r0,KSP_LIMIT(r8)
stw r0,SAVED_KSP_LIMIT(r11)
rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
@@ -108,7 +108,7 @@ crit_transfer_to_handler:
mfspr r0,SPRN_SRR1
stw r0,crit_srr1@l(0)
- mfspr r8,SPRN_SPRG3
+ mfspr r8,SPRN_SPRG_THREAD
lwz r0,KSP_LIMIT(r8)
stw r0,saved_ksp_limit@l(0)
rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
@@ -138,7 +138,7 @@ transfer_to_handler:
mfspr r2,SPRN_XER
stw r12,_CTR(r11)
stw r2,_XER(r11)
- mfspr r12,SPRN_SPRG3
+ mfspr r12,SPRN_SPRG_THREAD
addi r2,r12,-THREAD
tovirt(r2,r2) /* set r2 to current */
beq 2f /* if from user, fix up THREAD.regs */
@@ -680,7 +680,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPE)
tophys(r0,r4)
CLR_TOP32(r0)
- mtspr SPRN_SPRG3,r0 /* Update current THREAD phys addr */
+ mtspr SPRN_SPRG_THREAD,r0 /* Update current THREAD phys addr */
lwz r1,KSP(r4) /* Load new stack pointer */
/* save the old current 'last' for return value */
@@ -1057,7 +1057,7 @@ exc_exit_restart_end:
#ifdef CONFIG_40x
.globl ret_from_crit_exc
ret_from_crit_exc:
- mfspr r9,SPRN_SPRG3
+ mfspr r9,SPRN_SPRG_THREAD
lis r10,saved_ksp_limit@ha;
lwz r10,saved_ksp_limit@l(r10);
tovirt(r9,r9);
@@ -1074,7 +1074,7 @@ ret_from_crit_exc:
#ifdef CONFIG_BOOKE
.globl ret_from_crit_exc
ret_from_crit_exc:
- mfspr r9,SPRN_SPRG3
+ mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
RESTORE_xSRR(SRR0,SRR1);
@@ -1083,7 +1083,7 @@ ret_from_crit_exc:
.globl ret_from_debug_exc
ret_from_debug_exc:
- mfspr r9,SPRN_SPRG3
+ mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
lwz r9,THREAD_INFO-THREAD(r9)
@@ -1097,7 +1097,7 @@ ret_from_debug_exc:
.globl ret_from_mcheck_exc
ret_from_mcheck_exc:
- mfspr r9,SPRN_SPRG3
+ mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
RESTORE_xSRR(SRR0,SRR1);
@@ -1255,7 +1255,7 @@ _GLOBAL(enter_rtas)
MTMSRD(r0) /* don't get trashed */
li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
mtlr r6
- mtspr SPRN_SPRG2,r7
+ mtspr SPRN_SPRG_RTAS,r7
mtspr SPRN_SRR0,r8
mtspr SPRN_SRR1,r9
RFI
@@ -1265,7 +1265,7 @@ _GLOBAL(enter_rtas)
FIX_SRR1(r9,r0)
addi r1,r1,INT_FRAME_SIZE
li r0,0
- mtspr SPRN_SPRG2,r0
+ mtspr SPRN_SPRG_RTAS,r0
mtspr SPRN_SRR0,r8
mtspr SPRN_SRR1,r9
RFI /* return to caller */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 43e073477c3..66bcda34a6b 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -120,9 +120,15 @@ BEGIN_FW_FTR_SECTION
2:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
+
+ /* Hard enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 1
+#else
mfmsr r11
ori r11,r11,MSR_EE
mtmsrd r11,1
+#endif /* CONFIG_PPC_BOOK3E */
#ifdef SHOW_SYSCALLS
bl .do_show_syscall
@@ -168,15 +174,25 @@ syscall_exit:
#endif
clrrdi r12,r1,THREAD_SHIFT
- /* disable interrupts so current_thread_info()->flags can't change,
- and so that we don't get interrupted after loading SRR0/1. */
ld r8,_MSR(r1)
+#ifdef CONFIG_PPC_BOOK3S
+ /* No MSR:RI on BookE */
andi. r10,r8,MSR_RI
beq- unrecov_restore
+#endif
+
+ /* Disable interrupts so current_thread_info()->flags can't change,
+ * and so that we don't get interrupted after loading SRR0/1.
+ */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 0
+#else
mfmsr r10
rldicl r10,r10,48,1
rotldi r10,r10,16
mtmsrd r10,1
+#endif /* CONFIG_PPC_BOOK3E */
+
ld r9,TI_FLAGS(r12)
li r11,-_LAST_ERRNO
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
@@ -194,9 +210,13 @@ syscall_error_cont:
* userspace and we take an exception after restoring r13,
* we end up corrupting the userspace r13 value.
*/
+#ifdef CONFIG_PPC_BOOK3S
+ /* No MSR:RI on BookE */
li r12,MSR_RI
andc r11,r10,r12
mtmsrd r11,1 /* clear MSR.RI */
+#endif /* CONFIG_PPC_BOOK3S */
+
beq- 1f
ACCOUNT_CPU_USER_EXIT(r11, r12)
ld r13,GPR13(r1) /* only restore r13 if returning to usermode */
@@ -206,7 +226,7 @@ syscall_error_cont:
mtcr r5
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
- rfid
+ RFI
b . /* prevent speculative execution */
syscall_error:
@@ -276,9 +296,13 @@ syscall_exit_work:
beq .ret_from_except_lite
/* Re-enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 1
+#else
mfmsr r10
ori r10,r10,MSR_EE
mtmsrd r10,1
+#endif /* CONFIG_PPC_BOOK3E */
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
@@ -380,7 +404,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
and. r0,r0,r22
beq+ 1f
andc r22,r22,r0
- mtmsrd r22
+ MTMSRD(r22)
isync
1: std r20,_NIP(r1)
mfcr r23
@@ -399,6 +423,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
std r6,PACACURRENT(r13) /* Set new 'current' */
ld r8,KSP(r4) /* new stack pointer */
+#ifdef CONFIG_PPC_BOOK3S
BEGIN_FTR_SECTION
BEGIN_FTR_SECTION_NESTED(95)
clrrdi r6,r8,28 /* get its ESID */
@@ -445,8 +470,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
slbie r6 /* Workaround POWER5 < DD2.1 issue */
slbmte r7,r0
isync
-
2:
+#endif /* !CONFIG_PPC_BOOK3S */
+
clrrdi r7,r8,THREAD_SHIFT /* base of new stack */
/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
because we don't need to leave the 288-byte ABI gap at the
@@ -490,10 +516,14 @@ _GLOBAL(ret_from_except_lite)
* can't change between when we test it and when we return
* from the interrupt.
*/
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 0
+#else
mfmsr r10 /* Get current interrupt state */
rldicl r9,r10,48,1 /* clear MSR_EE */
rotldi r9,r9,16
mtmsrd r9,1 /* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
#ifdef CONFIG_PREEMPT
clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */
@@ -540,6 +570,9 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */
stb r4,PACAHARDIRQEN(r13)
+#ifdef CONFIG_PPC_BOOK3E
+ b .exception_return_book3e
+#else
ld r4,_CTR(r1)
ld r0,_LINK(r1)
mtctr r4
@@ -588,6 +621,8 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
rfid
b . /* prevent speculative execution */
+#endif /* CONFIG_PPC_BOOK3E */
+
iseries_check_pending_irqs:
#ifdef CONFIG_PPC_ISERIES
ld r5,SOFTE(r1)
@@ -638,6 +673,11 @@ do_work:
li r0,1
stb r0,PACASOFTIRQEN(r13)
stb r0,PACAHARDIRQEN(r13)
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 1
+ bl .preempt_schedule
+ wrteei 0
+#else
ori r10,r10,MSR_EE
mtmsrd r10,1 /* reenable interrupts */
bl .preempt_schedule
@@ -646,6 +686,7 @@ do_work:
rldicl r10,r10,48,1 /* disable interrupts again */
rotldi r10,r10,16
mtmsrd r10,1
+#endif /* CONFIG_PPC_BOOK3E */
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
@@ -654,8 +695,12 @@ do_work:
user_work:
#endif
/* Enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+ wrteei 1
+#else
ori r10,r10,MSR_EE
mtmsrd r10,1
+#endif /* CONFIG_PPC_BOOK3E */
andi. r0,r4,_TIF_NEED_RESCHED
beq 1f
@@ -762,7 +807,7 @@ _GLOBAL(enter_rtas)
_STATIC(rtas_return_loc)
/* relocation is off at this point */
- mfspr r4,SPRN_SPRG3 /* Get PACA */
+ mfspr r4,SPRN_SPRG_PACA /* Get PACA */
clrldi r4,r4,2 /* convert to realmode address */
bcl 20,31,$+4
@@ -793,7 +838,7 @@ _STATIC(rtas_restore_regs)
REST_8GPRS(14, r1) /* Restore the non-volatiles */
REST_10GPRS(22, r1) /* ditto */
- mfspr r13,SPRN_SPRG3
+ mfspr r13,SPRN_SPRG_PACA
ld r4,_CCR(r1)
mtcr r4
@@ -823,33 +868,24 @@ _GLOBAL(enter_prom)
* of all registers that it saves. We therefore save those registers
* PROM might touch to the stack. (r0, r3-r13 are caller saved)
*/
- SAVE_8GPRS(2, r1)
+ SAVE_GPR(2, r1)
SAVE_GPR(13, r1)
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
- mfcr r4
- std r4,_CCR(r1)
- mfctr r5
- std r5,_CTR(r1)
- mfspr r6,SPRN_XER
- std r6,_XER(r1)
- mfdar r7
- std r7,_DAR(r1)
- mfdsisr r8
- std r8,_DSISR(r1)
- mfsrr0 r9
- std r9,_SRR0(r1)
- mfsrr1 r10
- std r10,_SRR1(r1)
+ mfcr r10
mfmsr r11
+ std r10,_CCR(r1)
std r11,_MSR(r1)
/* Get the PROM entrypoint */
- ld r0,GPR4(r1)
- mtlr r0
+ mtlr r4
/* Switch MSR to 32 bits mode
*/
+#ifdef CONFIG_PPC_BOOK3E
+ rlwinm r11,r11,0,1,31
+ mtmsr r11
+#else /* CONFIG_PPC_BOOK3E */
mfmsr r11
li r12,1
rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
@@ -858,10 +894,10 @@ _GLOBAL(enter_prom)
rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
andc r11,r11,r12
mtmsrd r11
+#endif /* CONFIG_PPC_BOOK3E */
isync
- /* Restore arguments & enter PROM here... */
- ld r3,GPR3(r1)
+ /* Enter PROM here... */
blrl
/* Just make sure that r1 top 32 bits didn't get
@@ -871,7 +907,7 @@ _GLOBAL(enter_prom)
/* Restore the MSR (back to 64 bits) */
ld r0,_MSR(r1)
- mtmsrd r0
+ MTMSRD(r0)
isync
/* Restore other registers */
@@ -881,18 +917,6 @@ _GLOBAL(enter_prom)
REST_10GPRS(22, r1)
ld r4,_CCR(r1)
mtcr r4
- ld r5,_CTR(r1)
- mtctr r5
- ld r6,_XER(r1)
- mtspr SPRN_XER,r6
- ld r7,_DAR(r1)
- mtdar r7
- ld r8,_DSISR(r1)
- mtdsisr r8
- ld r9,_SRR0(r1)
- mtsrr0 r9
- ld r10,_SRR1(r1)
- mtsrr1 r10
addi r1,r1,PROM_FRAME_SIZE
ld r0,16(r1)
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
new file mode 100644
index 00000000000..9048f96237f
--- /dev/null
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -0,0 +1,1001 @@
+/*
+ * Boot code and exception vectors for Book3E processors
+ *
+ * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/setup.h>
+#include <asm/thread_info.h>
+#include <asm/reg.h>
+#include <asm/exception-64e.h>
+#include <asm/bug.h>
+#include <asm/irqflags.h>
+#include <asm/ptrace.h>
+#include <asm/ppc-opcode.h>
+#include <asm/mmu.h>
+
+/* XXX This will ultimately add space for a special exception save
+ * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
+ * when taking special interrupts. For now we don't support that,
+ * special interrupts from within a non-standard level will probably
+ * blow you up
+ */
+#define SPECIAL_EXC_FRAME_SIZE INT_FRAME_SIZE
+
+/* Exception prolog code for all exceptions */
+#define EXCEPTION_PROLOG(n, type, addition) \
+ mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \
+ mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \
+ std r10,PACA_EX##type+EX_R10(r13); \
+ std r11,PACA_EX##type+EX_R11(r13); \
+ mfcr r10; /* save CR */ \
+ addition; /* additional code for that exc. */ \
+ std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \
+ stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
+ mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \
+ type##_SET_KSTACK; /* get special stack if necessary */\
+ andi. r10,r11,MSR_PR; /* save stack pointer */ \
+ beq 1f; /* branch around if supervisor */ \
+ ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\
+1: cmpdi cr1,r1,0; /* check if SP makes sense */ \
+ bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
+ mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */
+
+/* Exception type-specific macros */
+#define GEN_SET_KSTACK \
+ subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */
+#define SPRN_GEN_SRR0 SPRN_SRR0
+#define SPRN_GEN_SRR1 SPRN_SRR1
+
+#define CRIT_SET_KSTACK \
+ ld r1,PACA_CRIT_STACK(r13); \
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_CRIT_SRR0 SPRN_CSRR0
+#define SPRN_CRIT_SRR1 SPRN_CSRR1
+
+#define DBG_SET_KSTACK \
+ ld r1,PACA_DBG_STACK(r13); \
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_DBG_SRR0 SPRN_DSRR0
+#define SPRN_DBG_SRR1 SPRN_DSRR1
+
+#define MC_SET_KSTACK \
+ ld r1,PACA_MC_STACK(r13); \
+ subi r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_MC_SRR0 SPRN_MCSRR0
+#define SPRN_MC_SRR1 SPRN_MCSRR1
+
+#define NORMAL_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, GEN, addition##_GEN)
+
+#define CRIT_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, CRIT, addition##_CRIT)
+
+#define DBG_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, DBG, addition##_DBG)
+
+#define MC_EXCEPTION_PROLOG(n, addition) \
+ EXCEPTION_PROLOG(n, MC, addition##_MC)
+
+
+/* Variants of the "addition" argument for the prolog
+ */
+#define PROLOG_ADDITION_NONE_GEN
+#define PROLOG_ADDITION_NONE_CRIT
+#define PROLOG_ADDITION_NONE_DBG
+#define PROLOG_ADDITION_NONE_MC
+
+#define PROLOG_ADDITION_MASKABLE_GEN \
+ lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \
+ cmpwi cr0,r11,0; /* yes -> go out of line */ \
+ beq masked_interrupt_book3e;
+
+#define PROLOG_ADDITION_2REGS_GEN \
+ std r14,PACA_EXGEN+EX_R14(r13); \
+ std r15,PACA_EXGEN+EX_R15(r13)
+
+#define PROLOG_ADDITION_1REG_GEN \
+ std r14,PACA_EXGEN+EX_R14(r13);
+
+#define PROLOG_ADDITION_2REGS_CRIT \
+ std r14,PACA_EXCRIT+EX_R14(r13); \
+ std r15,PACA_EXCRIT+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_DBG \
+ std r14,PACA_EXDBG+EX_R14(r13); \
+ std r15,PACA_EXDBG+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_MC \
+ std r14,PACA_EXMC+EX_R14(r13); \
+ std r15,PACA_EXMC+EX_R15(r13)
+
+/* Core exception code for all exceptions except TLB misses.
+ * XXX: Needs to make SPRN_SPRG_GEN depend on exception type
+ */
+#define EXCEPTION_COMMON(n, excf, ints) \
+ std r0,GPR0(r1); /* save r0 in stackframe */ \
+ std r2,GPR2(r1); /* save r2 in stackframe */ \
+ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
+ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
+ std r9,GPR9(r1); /* save r9 in stackframe */ \
+ std r10,_NIP(r1); /* save SRR0 to stackframe */ \
+ std r11,_MSR(r1); /* save SRR1 to stackframe */ \
+ ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \
+ ld r3,excf+EX_R10(r13); /* get back r10 */ \
+ ld r4,excf+EX_R11(r13); /* get back r11 */ \
+ mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */ \
+ std r12,GPR12(r1); /* save r12 in stackframe */ \
+ ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
+ mflr r6; /* save LR in stackframe */ \
+ mfctr r7; /* save CTR in stackframe */ \
+ mfspr r8,SPRN_XER; /* save XER in stackframe */ \
+ ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \
+ lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \
+ lbz r11,PACASOFTIRQEN(r13); /* get current IRQ softe */ \
+ ld r12,exception_marker@toc(r2); \
+ li r0,0; \
+ std r3,GPR10(r1); /* save r10 to stackframe */ \
+ std r4,GPR11(r1); /* save r11 to stackframe */ \
+ std r5,GPR13(r1); /* save it to stackframe */ \
+ std r6,_LINK(r1); \
+ std r7,_CTR(r1); \
+ std r8,_XER(r1); \
+ li r3,(n)+1; /* indicate partial regs in trap */ \
+ std r9,0(r1); /* store stack frame back link */ \
+ std r10,_CCR(r1); /* store orig CR in stackframe */ \
+ std r9,GPR1(r1); /* store stack frame back link */ \
+ std r11,SOFTE(r1); /* and save it to stackframe */ \
+ std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \
+ std r3,_TRAP(r1); /* set trap number */ \
+ std r0,RESULT(r1); /* clear regs->result */ \
+ ints;
+
+/* Variants for the "ints" argument */
+#define INTS_KEEP
+#define INTS_DISABLE_SOFT \
+ stb r0,PACASOFTIRQEN(r13); /* mark interrupts soft-disabled */ \
+ TRACE_DISABLE_INTS;
+#define INTS_DISABLE_HARD \
+ stb r0,PACAHARDIRQEN(r13); /* and hard disabled */
+#define INTS_DISABLE_ALL \
+ INTS_DISABLE_SOFT \
+ INTS_DISABLE_HARD
+
+/* This is called by exceptions that used INTS_KEEP (that is did not clear
+ * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE
+ * to it's previous value
+ *
+ * XXX In the long run, we may want to open-code it in order to separate the
+ * load from the wrtee, thus limiting the latency caused by the dependency
+ * but at this point, I'll favor code clarity until we have a near to final
+ * implementation
+ */
+#define INTS_RESTORE_HARD \
+ ld r11,_MSR(r1); \
+ wrtee r11;
+
+/* XXX FIXME: Restore r14/r15 when necessary */
+#define BAD_STACK_TRAMPOLINE(n) \
+exc_##n##_bad_stack: \
+ li r1,(n); /* get exception number */ \
+ sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \
+ b bad_stack_book3e; /* bad stack error */
+
+#define EXCEPTION_STUB(loc, label) \
+ . = interrupt_base_book3e + loc; \
+ nop; /* To make debug interrupts happy */ \
+ b exc_##label##_book3e;
+
+#define ACK_NONE(r)
+#define ACK_DEC(r) \
+ lis r,TSR_DIS@h; \
+ mtspr SPRN_TSR,r
+#define ACK_FIT(r) \
+ lis r,TSR_FIS@h; \
+ mtspr SPRN_TSR,r
+
+#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \
+ START_EXCEPTION(label); \
+ NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \
+ EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \
+ ack(r8); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ bl hdlr; \
+ b .ret_from_except_lite;
+
+/* This value is used to mark exception frames on the stack. */
+ .section ".toc","aw"
+exception_marker:
+ .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
+
+
+/*
+ * And here we have the exception vectors !
+ */
+
+ .text
+ .balign 0x1000
+ .globl interrupt_base_book3e
+interrupt_base_book3e: /* fake trap */
+ /* Note: If real debug exceptions are supported by the HW, the vector
+ * below will have to be patched up to point to an appropriate handler
+ */
+ EXCEPTION_STUB(0x000, machine_check) /* 0x0200 */
+ EXCEPTION_STUB(0x020, critical_input) /* 0x0580 */
+ EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */
+ EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */
+ EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */
+ EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */
+ EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */
+ EXCEPTION_STUB(0x0e0, program) /* 0x0700 */
+ EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */
+ EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */
+ EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */
+ EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */
+ EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */
+ EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */
+ EXCEPTION_STUB(0x1c0, data_tlb_miss)
+ EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+
+#if 0
+ EXCEPTION_STUB(0x280, processor_doorbell)
+ EXCEPTION_STUB(0x220, processor_doorbell_crit)
+#endif
+ .globl interrupt_end_book3e
+interrupt_end_book3e:
+
+/* Critical Input Interrupt */
+ START_EXCEPTION(critical_input);
+ CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE)
+// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL)
+// bl special_reg_save_crit
+// addi r3,r1,STACK_FRAME_OVERHEAD
+// bl .critical_exception
+// b ret_from_crit_except
+ b .
+
+/* Machine Check Interrupt */
+ START_EXCEPTION(machine_check);
+ CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE)
+// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL)
+// bl special_reg_save_mc
+// addi r3,r1,STACK_FRAME_OVERHEAD
+// bl .machine_check_exception
+// b ret_from_mc_except
+ b .
+
+/* Data Storage Interrupt */
+ START_EXCEPTION(data_storage)
+ NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS)
+ mfspr r14,SPRN_DEAR
+ mfspr r15,SPRN_ESR
+ EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP)
+ b storage_fault_common
+
+/* Instruction Storage Interrupt */
+ START_EXCEPTION(instruction_storage);
+ NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS)
+ li r15,0
+ mr r14,r10
+ EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP)
+ b storage_fault_common
+
+/* External Input Interrupt */
+ MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE)
+
+/* Alignment */
+ START_EXCEPTION(alignment);
+ NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS)
+ mfspr r14,SPRN_DEAR
+ mfspr r15,SPRN_ESR
+ EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP)
+ b alignment_more /* no room, go out of line */
+
+/* Program Interrupt */
+ START_EXCEPTION(program);
+ NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG)
+ mfspr r14,SPRN_ESR
+ EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT)
+ std r14,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r14,PACA_EXGEN+EX_R14(r13)
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .program_check_exception
+ b .ret_from_except
+
+/* Floating Point Unavailable Interrupt */
+ START_EXCEPTION(fp_unavailable);
+ NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE)
+ /* we can probably do a shorter exception entry for that one... */
+ EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP)
+ bne 1f /* if from user, just load it up */
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ INTS_RESTORE_HARD
+ bl .kernel_fp_unavailable_exception
+ BUG_OPCODE
+1: ld r12,_MSR(r1)
+ bl .load_up_fpu
+ b fast_exception_return
+
+/* Decrementer Interrupt */
+ MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC)
+
+/* Fixed Interval Timer Interrupt */
+ MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT)
+
+/* Watchdog Timer Interrupt */
+ START_EXCEPTION(watchdog);
+ CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE)
+// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL)
+// bl special_reg_save_crit
+// addi r3,r1,STACK_FRAME_OVERHEAD
+// bl .unknown_exception
+// b ret_from_crit_except
+ b .
+
+/* System Call Interrupt */
+ START_EXCEPTION(system_call)
+ mr r9,r13 /* keep a copy of userland r13 */
+ mfspr r11,SPRN_SRR0 /* get return address */
+ mfspr r12,SPRN_SRR1 /* get previous MSR */
+ mfspr r13,SPRN_SPRG_PACA /* get our PACA */
+ b system_call_common
+
+/* Auxillary Processor Unavailable Interrupt */
+ START_EXCEPTION(ap_unavailable);
+ NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE)
+ EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .unknown_exception
+ b .ret_from_except
+
+/* Debug exception as a critical interrupt*/
+ START_EXCEPTION(debug_crit);
+ CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
+
+ /*
+ * If there is a single step or branch-taken exception in an
+ * exception entry sequence, it was probably meant to apply to
+ * the code where the exception occurred (since exception entry
+ * doesn't turn off DE automatically). We simulate the effect
+ * of turning off DE on entry to an exception handler by turning
+ * off DE in the CSRR1 value and clearing the debug status.
+ */
+
+ mfspr r14,SPRN_DBSR /* check single-step/branch taken */
+ andis. r15,r14,DBSR_IC@h
+ beq+ 1f
+
+ LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
+ LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+ cmpld cr0,r10,r14
+ cmpld cr1,r10,r15
+ blt+ cr0,1f
+ bge+ cr1,1f
+
+ /* here it looks like we got an inappropriate debug exception. */
+ lis r14,DBSR_IC@h /* clear the IC event */
+ rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */
+ mtspr SPRN_DBSR,r14
+ mtspr SPRN_CSRR1,r11
+ lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */
+ ld r1,PACA_EXCRIT+EX_R1(r13)
+ ld r14,PACA_EXCRIT+EX_R14(r13)
+ ld r15,PACA_EXCRIT+EX_R15(r13)
+ mtcr r10
+ ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */
+ ld r11,PACA_EXCRIT+EX_R11(r13)
+ mfspr r13,SPRN_SPRG_CRIT_SCRATCH
+ rfci
+
+ /* Normal debug exception */
+ /* XXX We only handle coming from userspace for now since we can't
+ * quite save properly an interrupted kernel state yet
+ */
+1: andi. r14,r11,MSR_PR; /* check for userspace again */
+ beq kernel_dbg_exc; /* if from kernel mode */
+
+ /* Now we mash up things to make it look like we are coming on a
+ * normal exception
+ */
+ mfspr r15,SPRN_SPRG_CRIT_SCRATCH
+ mtspr SPRN_SPRG_GEN_SCRATCH,r15
+ mfspr r14,SPRN_DBSR
+ EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL)
+ std r14,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ mr r4,r14
+ ld r14,PACA_EXCRIT+EX_R14(r13)
+ ld r15,PACA_EXCRIT+EX_R15(r13)
+ bl .save_nvgprs
+ bl .DebugException
+ b .ret_from_except
+
+kernel_dbg_exc:
+ b . /* NYI */
+
+
+/*
+ * An interrupt came in while soft-disabled; clear EE in SRR1,
+ * clear paca->hard_enabled and return.
+ */
+masked_interrupt_book3e:
+ mtcr r10
+ stb r11,PACAHARDIRQEN(r13)
+ mfspr r10,SPRN_SRR1
+ rldicl r11,r10,48,1 /* clear MSR_EE */
+ rotldi r10,r11,16
+ mtspr SPRN_SRR1,r10
+ ld r10,PACA_EXGEN+EX_R10(r13); /* restore registers */
+ ld r11,PACA_EXGEN+EX_R11(r13);
+ mfspr r13,SPRN_SPRG_GEN_SCRATCH;
+ rfi
+ b .
+
+/*
+ * This is called from 0x300 and 0x400 handlers after the prologs with
+ * r14 and r15 containing the fault address and error code, with the
+ * original values stashed away in the PACA
+ */
+storage_fault_common:
+ std r14,_DAR(r1)
+ std r15,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ mr r4,r14
+ mr r5,r15
+ ld r14,PACA_EXGEN+EX_R14(r13)
+ ld r15,PACA_EXGEN+EX_R15(r13)
+ INTS_RESTORE_HARD
+ bl .do_page_fault
+ cmpdi r3,0
+ bne- 1f
+ b .ret_from_except_lite
+1: bl .save_nvgprs
+ mr r5,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r4,_DAR(r1)
+ bl .bad_page_fault
+ b .ret_from_except
+
+/*
+ * Alignment exception doesn't fit entirely in the 0x100 bytes so it
+ * continues here.
+ */
+alignment_more:
+ std r14,_DAR(r1)
+ std r15,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r14,PACA_EXGEN+EX_R14(r13)
+ ld r15,PACA_EXGEN+EX_R15(r13)
+ bl .save_nvgprs
+ INTS_RESTORE_HARD
+ bl .alignment_exception
+ b .ret_from_except
+
+/*
+ * We branch here from entry_64.S for the last stage of the exception
+ * return code path. MSR:EE is expected to be off at that point
+ */
+_GLOBAL(exception_return_book3e)
+ b 1f
+
+/* This is the return from load_up_fpu fast path which could do with
+ * less GPR restores in fact, but for now we have a single return path
+ */
+ .globl fast_exception_return
+fast_exception_return:
+ wrteei 0
+1: mr r0,r13
+ ld r10,_MSR(r1)
+ REST_4GPRS(2, r1)
+ andi. r6,r10,MSR_PR
+ REST_2GPRS(6, r1)
+ beq 1f
+ ACCOUNT_CPU_USER_EXIT(r10, r11)
+ ld r0,GPR13(r1)
+
+1: stdcx. r0,0,r1 /* to clear the reservation */
+
+ ld r8,_CCR(r1)
+ ld r9,_LINK(r1)
+ ld r10,_CTR(r1)
+ ld r11,_XER(r1)
+ mtcr r8
+ mtlr r9
+ mtctr r10
+ mtxer r11
+ REST_2GPRS(8, r1)
+ ld r10,GPR10(r1)
+ ld r11,GPR11(r1)
+ ld r12,GPR12(r1)
+ mtspr SPRN_SPRG_GEN_SCRATCH,r0
+
+ std r10,PACA_EXGEN+EX_R10(r13);
+ std r11,PACA_EXGEN+EX_R11(r13);
+ ld r10,_NIP(r1)
+ ld r11,_MSR(r1)
+ ld r0,GPR0(r1)
+ ld r1,GPR1(r1)
+ mtspr SPRN_SRR0,r10
+ mtspr SPRN_SRR1,r11
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ mfspr r13,SPRN_SPRG_GEN_SCRATCH
+ rfi
+
+/*
+ * Trampolines used when spotting a bad kernel stack pointer in
+ * the exception entry code.
+ *
+ * TODO: move some bits like SRR0 read to trampoline, pass PACA
+ * index around, etc... to handle crit & mcheck
+ */
+BAD_STACK_TRAMPOLINE(0x000)
+BAD_STACK_TRAMPOLINE(0x100)
+BAD_STACK_TRAMPOLINE(0x200)
+BAD_STACK_TRAMPOLINE(0x300)
+BAD_STACK_TRAMPOLINE(0x400)
+BAD_STACK_TRAMPOLINE(0x500)
+BAD_STACK_TRAMPOLINE(0x600)
+BAD_STACK_TRAMPOLINE(0x700)
+BAD_STACK_TRAMPOLINE(0x800)
+BAD_STACK_TRAMPOLINE(0x900)
+BAD_STACK_TRAMPOLINE(0x980)
+BAD_STACK_TRAMPOLINE(0x9f0)
+BAD_STACK_TRAMPOLINE(0xa00)
+BAD_STACK_TRAMPOLINE(0xb00)
+BAD_STACK_TRAMPOLINE(0xc00)
+BAD_STACK_TRAMPOLINE(0xd00)
+BAD_STACK_TRAMPOLINE(0xe00)
+BAD_STACK_TRAMPOLINE(0xf00)
+BAD_STACK_TRAMPOLINE(0xf20)
+
+ .globl bad_stack_book3e
+bad_stack_book3e:
+ /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
+ mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,64+INT_FRAME_SIZE
+ std r10,_NIP(r1)
+ std r11,_MSR(r1)
+ ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
+ lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
+ std r10,GPR1(r1)
+ std r11,_CCR(r1)
+ mfspr r10,SPRN_DEAR
+ mfspr r11,SPRN_ESR
+ std r10,_DAR(r1)
+ std r11,_DSISR(r1)
+ std r0,GPR0(r1); /* save r0 in stackframe */ \
+ std r2,GPR2(r1); /* save r2 in stackframe */ \
+ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
+ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
+ std r9,GPR9(r1); /* save r9 in stackframe */ \
+ ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \
+ ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \
+ mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
+ std r3,GPR10(r1); /* save r10 to stackframe */ \
+ std r4,GPR11(r1); /* save r11 to stackframe */ \
+ std r12,GPR12(r1); /* save r12 in stackframe */ \
+ std r5,GPR13(r1); /* save it to stackframe */ \
+ mflr r10
+ mfctr r11
+ mfxer r12
+ std r10,_LINK(r1)
+ std r11,_CTR(r1)
+ std r12,_XER(r1)
+ SAVE_10GPRS(14,r1)
+ SAVE_8GPRS(24,r1)
+ lhz r12,PACA_TRAP_SAVE(r13)
+ std r12,_TRAP(r1)
+ addi r11,r1,INT_FRAME_SIZE
+ std r11,0(r1)
+ li r12,0
+ std r12,0(r11)
+ ld r2,PACATOC(r13)
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .kernel_bad_stack
+ b 1b
+
+/*
+ * Setup the initial TLB for a core. This current implementation
+ * assume that whatever we are running off will not conflict with
+ * the new mapping at PAGE_OFFSET.
+ */
+_GLOBAL(initial_tlb_book3e)
+
+ /* Look for the first TLB with IPROT set */
+ mfspr r4,SPRN_TLB0CFG
+ andi. r3,r4,TLBnCFG_IPROT
+ lis r3,MAS0_TLBSEL(0)@h
+ bne found_iprot
+
+ mfspr r4,SPRN_TLB1CFG
+ andi. r3,r4,TLBnCFG_IPROT
+ lis r3,MAS0_TLBSEL(1)@h
+ bne found_iprot
+
+ mfspr r4,SPRN_TLB2CFG
+ andi. r3,r4,TLBnCFG_IPROT
+ lis r3,MAS0_TLBSEL(2)@h
+ bne found_iprot
+
+ lis r3,MAS0_TLBSEL(3)@h
+ mfspr r4,SPRN_TLB3CFG
+ /* fall through */
+
+found_iprot:
+ andi. r5,r4,TLBnCFG_HES
+ bne have_hes
+
+ mflr r8 /* save LR */
+/* 1. Find the index of the entry we're executing in
+ *
+ * r3 = MAS0_TLBSEL (for the iprot array)
+ * r4 = SPRN_TLBnCFG
+ */
+ bl invstr /* Find our address */
+invstr: mflr r6 /* Make it accessible */
+ mfmsr r7
+ rlwinm r5,r7,27,31,31 /* extract MSR[IS] */
+ mfspr r7,SPRN_PID
+ slwi r7,r7,16
+ or r7,r7,r5
+ mtspr SPRN_MAS6,r7
+ tlbsx 0,r6 /* search MSR[IS], SPID=PID */
+
+ mfspr r3,SPRN_MAS0
+ rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */
+
+ mfspr r7,SPRN_MAS1 /* Insure IPROT set */
+ oris r7,r7,MAS1_IPROT@h
+ mtspr SPRN_MAS1,r7
+ tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ * r4 = SPRN_TLBnCFG
+ * r5 = ESEL of entry we are running in
+ */
+ andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */
+ li r6,0 /* Set Entry counter to 0 */
+1: mr r7,r3 /* Set MAS0(TLBSEL) */
+ rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+ mfspr r7,SPRN_MAS1
+ rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
+ cmpw r5,r6
+ beq skpinv /* Dont update the current execution TLB */
+ mtspr SPRN_MAS1,r7
+ tlbwe
+ isync
+skpinv: addi r6,r6,1 /* Increment */
+ cmpw r6,r4 /* Are we done? */
+ bne 1b /* If not, repeat */
+
+ /* Invalidate all TLBs */
+ PPC_TLBILX_ALL(0,0)
+ sync
+ isync
+
+/* 3. Setup a temp mapping and jump to it
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ * r5 = ESEL of entry we are running in
+ */
+ andi. r7,r5,0x1 /* Find an entry not used and is non-zero */
+ addi r7,r7,0x1
+ mr r4,r3 /* Set MAS0(TLBSEL) = 1 */
+ mtspr SPRN_MAS0,r4
+ tlbre
+
+ rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */
+ mtspr SPRN_MAS0,r4
+
+ mfspr r7,SPRN_MAS1
+ xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */
+ mtspr SPRN_MAS1,r6
+
+ tlbwe
+
+ mfmsr r6
+ xori r6,r6,MSR_IS
+ mtspr SPRN_SRR1,r6
+ bl 1f /* Find our address */
+1: mflr r6
+ addi r6,r6,(2f - 1b)
+ mtspr SPRN_SRR0,r6
+ rfi
+2:
+
+/* 4. Clear out PIDs & Search info
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+ li r6,0
+ mtspr SPRN_MAS6,r6
+ mtspr SPRN_PID,r6
+
+/* 5. Invalidate mapping we started in
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+ mtspr SPRN_MAS0,r3
+ tlbre
+ mfspr r6,SPRN_MAS1
+ rlwinm r6,r6,0,2,0 /* clear IPROT */
+ mtspr SPRN_MAS1,r6
+ tlbwe
+
+ /* Invalidate TLB1 */
+ PPC_TLBILX_ALL(0,0)
+ sync
+ isync
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP MAS2_M
+#else
+#define M_IF_SMP 0
+#endif
+
+/* 6. Setup KERNELBASE mapping in TLB[0]
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+ rlwinm r3,r3,0,16,3 /* clear ESEL */
+ mtspr SPRN_MAS0,r3
+ lis r6,(MAS1_VALID|MAS1_IPROT)@h
+ ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
+ mtspr SPRN_MAS1,r6
+
+ LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP)
+ mtspr SPRN_MAS2,r6
+
+ rlwinm r5,r5,0,0,25
+ ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX
+ mtspr SPRN_MAS3,r5
+ li r5,-1
+ rlwinm r5,r5,0,0,25
+
+ tlbwe
+
+/* 7. Jump to KERNELBASE mapping
+ *
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ */
+ /* Now we branch the new virtual address mapped by this entry */
+ LOAD_REG_IMMEDIATE(r6,2f)
+ lis r7,MSR_KERNEL@h
+ ori r7,r7,MSR_KERNEL@l
+ mtspr SPRN_SRR0,r6
+ mtspr SPRN_SRR1,r7
+ rfi /* start execution out of TLB1[0] entry */
+2:
+
+/* 8. Clear out the temp mapping
+ *
+ * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ */
+ mtspr SPRN_MAS0,r4
+ tlbre
+ mfspr r5,SPRN_MAS1
+ rlwinm r5,r5,0,2,0 /* clear IPROT */
+ mtspr SPRN_MAS1,r5
+ tlbwe
+
+ /* Invalidate TLB1 */
+ PPC_TLBILX_ALL(0,0)
+ sync
+ isync
+
+ /* We translate LR and return */
+ tovirt(r8,r8)
+ mtlr r8
+ blr
+
+have_hes:
+ /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
+ * kernel linear mapping. We also set MAS8 once for all here though
+ * that will have to be made dependent on whether we are running under
+ * a hypervisor I suppose.
+ */
+ ori r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS
+ mtspr SPRN_MAS0,r3
+ lis r3,(MAS1_VALID | MAS1_IPROT)@h
+ ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
+ mtspr SPRN_MAS1,r3
+ LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
+ mtspr SPRN_MAS2,r3
+ li r3,MAS3_SR | MAS3_SW | MAS3_SX
+ mtspr SPRN_MAS7_MAS3,r3
+ li r3,0
+ mtspr SPRN_MAS8,r3
+
+ /* Write the TLB entry */
+ tlbwe
+
+ /* Now we branch the new virtual address mapped by this entry */
+ LOAD_REG_IMMEDIATE(r3,1f)
+ mtctr r3
+ bctr
+
+1: /* We are now running at PAGE_OFFSET, clean the TLB of everything
+ * else (XXX we should scan for bolted crap from the firmware too)
+ */
+ PPC_TLBILX(0,0,0)
+ sync
+ isync
+
+ /* We translate LR and return */
+ mflr r3
+ tovirt(r3,r3)
+ mtlr r3
+ blr
+
+/*
+ * Main entry (boot CPU, thread 0)
+ *
+ * We enter here from head_64.S, possibly after the prom_init trampoline
+ * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
+ * mode. Anything else is as it was left by the bootloader
+ *
+ * Initial requirements of this port:
+ *
+ * - Kernel loaded at 0 physical
+ * - A good lump of memory mapped 0:0 by UTLB entry 0
+ * - MSR:IS & MSR:DS set to 0
+ *
+ * Note that some of the above requirements will be relaxed in the future
+ * as the kernel becomes smarter at dealing with different initial conditions
+ * but for now you have to be careful
+ */
+_GLOBAL(start_initialization_book3e)
+ mflr r28
+
+ /* First, we need to setup some initial TLBs to map the kernel
+ * text, data and bss at PAGE_OFFSET. We don't have a real mode
+ * and always use AS 0, so we just set it up to match our link
+ * address and never use 0 based addresses.
+ */
+ bl .initial_tlb_book3e
+
+ /* Init global core bits */
+ bl .init_core_book3e
+
+ /* Init per-thread bits */
+ bl .init_thread_book3e
+
+ /* Return to common init code */
+ tovirt(r28,r28)
+ mtlr r28
+ blr
+
+
+/*
+ * Secondary core/processor entry
+ *
+ * This is entered for thread 0 of a secondary core, all other threads
+ * are expected to be stopped. It's similar to start_initialization_book3e
+ * except that it's generally entered from the holding loop in head_64.S
+ * after CPUs have been gathered by Open Firmware.
+ *
+ * We assume we are in 32 bits mode running with whatever TLB entry was
+ * set for us by the firmware or POR engine.
+ */
+_GLOBAL(book3e_secondary_core_init_tlb_set)
+ li r4,1
+ b .generic_secondary_smp_init
+
+_GLOBAL(book3e_secondary_core_init)
+ mflr r28
+
+ /* Do we need to setup initial TLB entry ? */
+ cmplwi r4,0
+ bne 2f
+
+ /* Setup TLB for this core */
+ bl .initial_tlb_book3e
+
+ /* We can return from the above running at a different
+ * address, so recalculate r2 (TOC)
+ */
+ bl .relative_toc
+
+ /* Init global core bits */
+2: bl .init_core_book3e
+
+ /* Init per-thread bits */
+3: bl .init_thread_book3e
+
+ /* Return to common init code at proper virtual address.
+ *
+ * Due to various previous assumptions, we know we entered this
+ * function at either the final PAGE_OFFSET mapping or using a
+ * 1:1 mapping at 0, so we don't bother doing a complicated check
+ * here, we just ensure the return address has the right top bits.
+ *
+ * Note that if we ever want to be smarter about where we can be
+ * started from, we have to be careful that by the time we reach
+ * the code below we may already be running at a different location
+ * than the one we were called from since initial_tlb_book3e can
+ * have moved us already.
+ */
+ cmpdi cr0,r28,0
+ blt 1f
+ lis r3,PAGE_OFFSET@highest
+ sldi r3,r3,32
+ or r28,r28,r3
+1: mtlr r28
+ blr
+
+_GLOBAL(book3e_secondary_thread_init)
+ mflr r28
+ b 3b
+
+_STATIC(init_core_book3e)
+ /* Establish the interrupt vector base */
+ LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
+ mtspr SPRN_IVPR,r3
+ sync
+ blr
+
+_STATIC(init_thread_book3e)
+ lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
+ mtspr SPRN_EPCR,r3
+
+ /* Make sure interrupts are off */
+ wrteei 0
+
+ /* disable all timers and clear out status */
+ li r3,0
+ mtspr SPRN_TCR,r3
+ mfspr r3,SPRN_TSR
+ mtspr SPRN_TSR,r3
+
+ blr
+
+_GLOBAL(__setup_base_ivors)
+ SET_IVOR(0, 0x020) /* Critical Input */
+ SET_IVOR(1, 0x000) /* Machine Check */
+ SET_IVOR(2, 0x060) /* Data Storage */
+ SET_IVOR(3, 0x080) /* Instruction Storage */
+ SET_IVOR(4, 0x0a0) /* External Input */
+ SET_IVOR(5, 0x0c0) /* Alignment */
+ SET_IVOR(6, 0x0e0) /* Program */
+ SET_IVOR(7, 0x100) /* FP Unavailable */
+ SET_IVOR(8, 0x120) /* System Call */
+ SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
+ SET_IVOR(10, 0x160) /* Decrementer */
+ SET_IVOR(11, 0x180) /* Fixed Interval Timer */
+ SET_IVOR(12, 0x1a0) /* Watchdog Timer */
+ SET_IVOR(13, 0x1c0) /* Data TLB Error */
+ SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
+ SET_IVOR(15, 0x040) /* Debug */
+
+ sync
+
+ blr
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 8ac85e08ffa..1808876edcc 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -12,6 +12,8 @@
*
*/
+#include <asm/exception-64s.h>
+
/*
* We layout physical memory as follows:
* 0x0000 - 0x00ff : Secondary processor spin code
@@ -22,18 +24,6 @@
* 0x8000 - : Early init and support code
*/
-
-/*
- * SPRG Usage
- *
- * Register Definition
- *
- * SPRG0 reserved for hypervisor
- * SPRG1 temp - used to save gpr
- * SPRG2 temp - used to save gpr
- * SPRG3 virt addr of paca
- */
-
/*
* This is the start of the interrupt handlers for pSeries
* This code runs with relocation off.
@@ -51,34 +41,44 @@ __start_interrupts:
. = 0x200
_machine_check_pSeries:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
. = 0x300
.globl data_access_pSeries
data_access_pSeries:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
+ mtspr SPRN_SPRG_SCRATCH0,r13
BEGIN_FTR_SECTION
- mtspr SPRN_SPRG2,r12
- mfspr r13,SPRN_DAR
- mfspr r12,SPRN_DSISR
- srdi r13,r13,60
- rlwimi r13,r12,16,0x20
- mfcr r12
- cmpwi r13,0x2c
+ mfspr r13,SPRN_SPRG_PACA
+ std r9,PACA_EXSLB+EX_R9(r13)
+ std r10,PACA_EXSLB+EX_R10(r13)
+ mfspr r10,SPRN_DAR
+ mfspr r9,SPRN_DSISR
+ srdi r10,r10,60
+ rlwimi r10,r9,16,0x20
+ mfcr r9
+ cmpwi r10,0x2c
beq do_stab_bolted_pSeries
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R11(r13)
+ ld r11,PACA_EXSLB+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R12(r13)
+ mfspr r12,SPRN_SPRG_SCRATCH0
+ std r10,PACA_EXGEN+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R13(r13)
+ EXCEPTION_PROLOG_PSERIES_1(data_access_common)
+FTR_SECTION_ELSE
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
. = 0x380
.globl data_access_slb_pSeries
data_access_slb_pSeries:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13
+ mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_DAR
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
@@ -91,7 +91,7 @@ data_access_slb_pSeries:
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
+ mfspr r10,SPRN_SPRG_SCRATCH0
std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
#ifndef CONFIG_RELOCATABLE
@@ -115,8 +115,8 @@ data_access_slb_pSeries:
.globl instruction_access_slb_pSeries
instruction_access_slb_pSeries:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13
+ mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
@@ -129,7 +129,7 @@ instruction_access_slb_pSeries:
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
+ mfspr r10,SPRN_SPRG_SCRATCH0
std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
#ifndef CONFIG_RELOCATABLE
@@ -159,7 +159,7 @@ BEGIN_FTR_SECTION
beq- 1f
END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
mr r9,r13
- mfspr r13,SPRN_SPRG3
+ mfspr r13,SPRN_SPRG_PACA
mfspr r11,SPRN_SRR0
ld r12,PACAKBASE(r13)
ld r10,PACAKMSR(r13)
@@ -228,15 +228,17 @@ masked_interrupt:
rotldi r10,r10,16
mtspr SPRN_SRR1,r10
ld r10,PACA_EXGEN+EX_R10(r13)
- mfspr r13,SPRN_SPRG1
+ mfspr r13,SPRN_SPRG_SCRATCH0
rfid
b .
.align 7
do_stab_bolted_pSeries:
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
- EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ mfspr r10,SPRN_SPRG_SCRATCH0
+ std r10,PACA_EXSLB+EX_R13(r13)
+ EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted)
#ifdef CONFIG_PPC_PSERIES
/*
@@ -246,14 +248,14 @@ do_stab_bolted_pSeries:
.align 7
system_reset_fwnmi:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
.globl machine_check_fwnmi
.align 7
machine_check_fwnmi:
HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
#endif /* CONFIG_PPC_PSERIES */
@@ -268,7 +270,7 @@ slb_miss_user_pseries:
std r10,PACA_EXGEN+EX_R10(r13)
std r11,PACA_EXGEN+EX_R11(r13)
std r12,PACA_EXGEN+EX_R12(r13)
- mfspr r10,SPRG1
+ mfspr r10,SPRG_SCRATCH0
ld r11,PACA_EXSLB+EX_R9(r13)
ld r12,PACA_EXSLB+EX_R3(r13)
std r10,PACA_EXGEN+EX_R13(r13)
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 2436df33c6f..fc8f5b14019 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -91,7 +91,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif /* CONFIG_SMP */
/* enable use of FP after return */
#ifdef CONFIG_PPC32
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
lwz r4,THREAD_FPEXC_MODE(r5)
ori r9,r9,MSR_FP /* enable FP for current */
or r9,r9,r4
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index fc213294275..829c3fe7c5a 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -244,8 +244,8 @@ __secondary_hold_acknowledge:
* task's thread_struct.
*/
#define EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; \
- mtspr SPRN_SPRG1,r11; \
+ mtspr SPRN_SPRG_SCRATCH0,r10; \
+ mtspr SPRN_SPRG_SCRATCH1,r11; \
mfcr r10; \
EXCEPTION_PROLOG_1; \
EXCEPTION_PROLOG_2
@@ -255,7 +255,7 @@ __secondary_hold_acknowledge:
andi. r11,r11,MSR_PR; \
tophys(r11,r1); /* use tophys(r1) if kernel */ \
beq 1f; \
- mfspr r11,SPRN_SPRG3; \
+ mfspr r11,SPRN_SPRG_THREAD; \
lwz r11,THREAD_INFO-THREAD(r11); \
addi r11,r11,THREAD_SIZE; \
tophys(r11,r11); \
@@ -267,9 +267,9 @@ __secondary_hold_acknowledge:
stw r10,_CCR(r11); /* save registers */ \
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
+ mfspr r10,SPRN_SPRG_SCRATCH0; \
stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
+ mfspr r12,SPRN_SPRG_SCRATCH1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
@@ -355,11 +355,11 @@ i##n: \
* -- paulus.
*/
. = 0x200
- mtspr SPRN_SPRG0,r10
- mtspr SPRN_SPRG1,r11
+ mtspr SPRN_SPRG_SCRATCH0,r10
+ mtspr SPRN_SPRG_SCRATCH1,r11
mfcr r10
#ifdef CONFIG_PPC_CHRP
- mfspr r11,SPRN_SPRG2
+ mfspr r11,SPRN_SPRG_RTAS
cmpwi 0,r11,0
bne 7f
#endif /* CONFIG_PPC_CHRP */
@@ -367,7 +367,7 @@ i##n: \
7: EXCEPTION_PROLOG_2
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_CHRP
- mfspr r4,SPRN_SPRG2
+ mfspr r4,SPRN_SPRG_RTAS
cmpwi cr1,r4,0
bne cr1,1f
#endif
@@ -485,7 +485,7 @@ InstructionTLBMiss:
mfspr r3,SPRN_IMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG3
+ mfspr r2,SPRN_SPRG_THREAD
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
bge- 112f
@@ -559,7 +559,7 @@ DataLoadTLBMiss:
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG3
+ mfspr r2,SPRN_SPRG_THREAD
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
bge- 112f
@@ -598,12 +598,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtcrf 0x80,r2
BEGIN_MMU_FTR_SECTION
li r0,1
- mfspr r1,SPRN_SPRG4
+ mfspr r1,SPRN_SPRG_603_LRU
rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
slw r0,r0,r2
xor r1,r0,r1
srw r0,r1,r2
- mtspr SPRN_SPRG4,r1
+ mtspr SPRN_SPRG_603_LRU,r1
mfspr r2,SPRN_SRR1
rlwimi r2,r0,31-14,14,14
mtspr SPRN_SRR1,r2
@@ -643,7 +643,7 @@ DataStoreTLBMiss:
mfspr r3,SPRN_DMISS
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
- mfspr r2,SPRN_SPRG3
+ mfspr r2,SPRN_SPRG_THREAD
li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
lwz r2,PGDIR(r2)
bge- 112f
@@ -678,12 +678,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtcrf 0x80,r2
BEGIN_MMU_FTR_SECTION
li r0,1
- mfspr r1,SPRN_SPRG4
+ mfspr r1,SPRN_SPRG_603_LRU
rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
slw r0,r0,r2
xor r1,r0,r1
srw r0,r1,r2
- mtspr SPRN_SPRG4,r1
+ mtspr SPRN_SPRG_603_LRU,r1
mfspr r2,SPRN_SRR1
rlwimi r2,r0,31-14,14,14
mtspr SPRN_SRR1,r2
@@ -864,9 +864,9 @@ __secondary_start:
tophys(r4,r2)
addi r4,r4,THREAD /* phys address of our thread_struct */
CLR_TOP32(r4)
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
li r3,0
- mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
+ mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
/* enable MMU and jump to start_secondary */
li r4,MSR_KERNEL
@@ -947,9 +947,9 @@ start_here:
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
CLR_TOP32(r4)
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
li r3,0
- mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
+ mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
/* stack */
lis r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 0c96911d429..a90625f9b48 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -103,21 +103,21 @@ _ENTRY(saved_ksp_limit)
/*
* Exception vector entry code. This code runs with address translation
- * turned off (i.e. using physical addresses). We assume SPRG3 has the
- * physical address of the current task thread_struct.
+ * turned off (i.e. using physical addresses). We assume SPRG_THREAD has
+ * the physical address of the current task thread_struct.
* Note that we have to have decremented r1 before we write to any fields
* of the exception frame, since a critical interrupt could occur at any
* time, and it will write to the area immediately below the current r1.
*/
#define NORMAL_EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
- mtspr SPRN_SPRG1,r11; \
- mtspr SPRN_SPRG2,r1; \
+ mtspr SPRN_SPRG_SCRATCH0,r10; /* save two registers to work with */\
+ mtspr SPRN_SPRG_SCRATCH1,r11; \
+ mtspr SPRN_SPRG_SCRATCH2,r1; \
mfcr r10; /* save CR in r10 for now */\
mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
andi. r11,r11,MSR_PR; \
beq 1f; \
- mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
+ mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
addi r1,r1,THREAD_SIZE; \
1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
@@ -125,13 +125,13 @@ _ENTRY(saved_ksp_limit)
stw r10,_CCR(r11); /* save various registers */\
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
+ mfspr r10,SPRN_SPRG_SCRATCH0; \
stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
+ mfspr r12,SPRN_SPRG_SCRATCH1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
- mfspr r10,SPRN_SPRG2; \
+ mfspr r10,SPRN_SPRG_SCRATCH2; \
mfspr r12,SPRN_SRR0; \
stw r10,GPR1(r11); \
mfspr r9,SPRN_SRR1; \
@@ -160,7 +160,7 @@ _ENTRY(saved_ksp_limit)
lwz r11,critirq_ctx@l(r11); \
beq 1f; \
/* COMING FROM USER MODE */ \
- mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
+ mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\
tophys(r11,r11); \
@@ -265,8 +265,8 @@ label:
* and exit. Otherwise, we call heavywight functions to do the work.
*/
START_EXCEPTION(0x0300, DataStorage)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_SCRATCH1, r11
#ifdef CONFIG_403GCX
stw r12, 0(r0)
stw r9, 4(r0)
@@ -275,12 +275,12 @@ label:
stw r11, 8(r0)
stw r12, 12(r0)
#else
- mtspr SPRN_SPRG4, r12
- mtspr SPRN_SPRG5, r9
+ mtspr SPRN_SPRG_SCRATCH3, r12
+ mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
mfspr r12, SPRN_PID
- mtspr SPRN_SPRG7, r11
- mtspr SPRN_SPRG6, r12
+ mtspr SPRN_SPRG_SCRATCH6, r11
+ mtspr SPRN_SPRG_SCRATCH5, r12
#endif
/* First, check if it was a zone fault (which means a user
@@ -308,7 +308,7 @@ label:
/* Get the PGD for the current thread.
*/
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
tophys(r11, r11)
@@ -355,15 +355,15 @@ label:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
PPC405_ERR77_SYNC
rfi /* Should sync shadow TLBs */
b . /* prevent prefetch past rfi */
@@ -380,15 +380,15 @@ label:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
b DataAccess
/*
@@ -466,8 +466,8 @@ label:
* load TLB entries from the page table if they exist.
*/
START_EXCEPTION(0x1100, DTLBMiss)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_SCRATCH1, r11
#ifdef CONFIG_403GCX
stw r12, 0(r0)
stw r9, 4(r0)
@@ -476,12 +476,12 @@ label:
stw r11, 8(r0)
stw r12, 12(r0)
#else
- mtspr SPRN_SPRG4, r12
- mtspr SPRN_SPRG5, r9
+ mtspr SPRN_SPRG_SCRATCH3, r12
+ mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
mfspr r12, SPRN_PID
- mtspr SPRN_SPRG7, r11
- mtspr SPRN_SPRG6, r12
+ mtspr SPRN_SPRG_SCRATCH6, r11
+ mtspr SPRN_SPRG_SCRATCH5, r12
#endif
mfspr r10, SPRN_DEAR /* Get faulting address */
@@ -500,7 +500,7 @@ label:
/* Get the PGD for the current thread.
*/
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
tophys(r11, r11)
@@ -550,15 +550,15 @@ label:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
b DataAccess
/* 0x1200 - Instruction TLB Miss Exception
@@ -566,8 +566,8 @@ label:
* registers and bailout to a different point.
*/
START_EXCEPTION(0x1200, ITLBMiss)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_SCRATCH1, r11
#ifdef CONFIG_403GCX
stw r12, 0(r0)
stw r9, 4(r0)
@@ -576,12 +576,12 @@ label:
stw r11, 8(r0)
stw r12, 12(r0)
#else
- mtspr SPRN_SPRG4, r12
- mtspr SPRN_SPRG5, r9
+ mtspr SPRN_SPRG_SCRATCH3, r12
+ mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
mfspr r12, SPRN_PID
- mtspr SPRN_SPRG7, r11
- mtspr SPRN_SPRG6, r12
+ mtspr SPRN_SPRG_SCRATCH6, r11
+ mtspr SPRN_SPRG_SCRATCH5, r12
#endif
mfspr r10, SPRN_SRR0 /* Get faulting address */
@@ -600,7 +600,7 @@ label:
/* Get the PGD for the current thread.
*/
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
tophys(r11, r11)
@@ -650,15 +650,15 @@ label:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
b InstructionAccess
EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
@@ -803,15 +803,15 @@ finish_tlb_load:
lwz r9, 4(r0)
lwz r12, 0(r0)
#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
+ mfspr r12, SPRN_SPRG_SCRATCH5
+ mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
+ mfspr r9, SPRN_SPRG_SCRATCH4
+ mfspr r12, SPRN_SPRG_SCRATCH3
#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
PPC405_ERR77_SYNC
rfi /* Should sync shadow TLBs */
b . /* prevent prefetch past rfi */
@@ -835,7 +835,7 @@ start_here:
/* ptr to phys current thread */
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
/* stack */
lis r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 18d8a1677c4..711368b993f 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -239,7 +239,7 @@ skpinv: addi r4,r4,1 /* Increment */
/* ptr to current thread */
addi r4,r2,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
/* stack */
lis r1,init_thread_union@h
@@ -350,12 +350,12 @@ interrupt_base:
/* Data TLB Error Interrupt */
START_EXCEPTION(DataTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
+ mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1, r11
+ mtspr SPRN_SPRG_WSCRATCH2, r12
+ mtspr SPRN_SPRG_WSCRATCH3, r13
mfcr r11
- mtspr SPRN_SPRG7W, r11
+ mtspr SPRN_SPRG_WSCRATCH4, r11
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -374,7 +374,7 @@ interrupt_base:
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
/* Load PID into MMUCR TID */
@@ -446,12 +446,12 @@ tlb_44x_patch_hwater_D:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
b DataStorage
/* Instruction TLB Error Interrupt */
@@ -461,12 +461,12 @@ tlb_44x_patch_hwater_D:
* to a different point.
*/
START_EXCEPTION(InstructionTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
+ mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1, r11
+ mtspr SPRN_SPRG_WSCRATCH2, r12
+ mtspr SPRN_SPRG_WSCRATCH3, r13
mfcr r11
- mtspr SPRN_SPRG7W, r11
+ mtspr SPRN_SPRG_WSCRATCH4, r11
mfspr r10, SPRN_SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -485,7 +485,7 @@ tlb_44x_patch_hwater_D:
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
/* Load PID into MMUCR TID */
@@ -497,7 +497,7 @@ tlb_44x_patch_hwater_D:
mtspr SPRN_MMUCR,r12
/* Make up the required permissions */
- li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+ li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
/* Compute pgdir/pmd offset */
rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29
@@ -542,12 +542,12 @@ tlb_44x_patch_hwater_I:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
b InstructionStorage
/* Debug Interrupt */
@@ -593,12 +593,12 @@ finish_tlb_load:
/* Done...restore registers and get out of here.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
rfi /* Force context change */
/*
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 012505ebd9f..c38afdb45d7 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -36,7 +36,6 @@
#include <asm/thread_info.h>
#include <asm/firmware.h>
#include <asm/page_64.h>
-#include <asm/exception.h>
#include <asm/irqflags.h>
/* The physical memory is layed out such that the secondary processor
@@ -122,10 +121,11 @@ __run_at_load:
*/
.globl __secondary_hold
__secondary_hold:
+#ifndef CONFIG_PPC_BOOK3E
mfmsr r24
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
-
+#endif
/* Grab our physical cpu number */
mr r24,r3
@@ -144,6 +144,7 @@ __secondary_hold:
ld r4,0(r4) /* deref function descriptor */
mtctr r4
mr r3,r24
+ li r4,0
bctr
#else
BUG_OPCODE
@@ -164,21 +165,49 @@ exception_marker:
#include "exceptions-64s.S"
#endif
+_GLOBAL(generic_secondary_thread_init)
+ mr r24,r3
+
+ /* turn on 64-bit mode */
+ bl .enable_64b_mode
+
+ /* get a valid TOC pointer, wherever we're mapped at */
+ bl .relative_toc
+
+#ifdef CONFIG_PPC_BOOK3E
+ /* Book3E initialization */
+ mr r3,r24
+ bl .book3e_secondary_thread_init
+#endif
+ b generic_secondary_common_init
/*
* On pSeries and most other platforms, secondary processors spin
* in the following code.
* At entry, r3 = this processor's number (physical cpu id)
+ *
+ * On Book3E, r4 = 1 to indicate that the initial TLB entry for
+ * this core already exists (setup via some other mechanism such
+ * as SCOM before entry).
*/
_GLOBAL(generic_secondary_smp_init)
mr r24,r3
-
+ mr r25,r4
+
/* turn on 64-bit mode */
bl .enable_64b_mode
- /* get the TOC pointer (real address) */
+ /* get a valid TOC pointer, wherever we're mapped at */
bl .relative_toc
+#ifdef CONFIG_PPC_BOOK3E
+ /* Book3E initialization */
+ mr r3,r24
+ mr r4,r25
+ bl .book3e_secondary_core_init
+#endif
+
+generic_secondary_common_init:
/* Set up a paca value for this processor. Since we have the
* physical cpu id in r24, we need to search the pacas to find
* which logical id maps to our physical one.
@@ -196,7 +225,12 @@ _GLOBAL(generic_secondary_smp_init)
mr r3,r24 /* not found, copy phys to r3 */
b .kexec_wait /* next kernel might do better */
-2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
+2: mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG */
+#ifdef CONFIG_PPC_BOOK3E
+ addi r12,r13,PACA_EXTLB /* and TLB exc frame in another */
+ mtspr SPRN_SPRG_TLB_EXFRAME,r12
+#endif
+
/* From now on, r24 is expected to be logical cpuid */
mr r24,r5
3: HMT_LOW
@@ -232,6 +266,7 @@ _GLOBAL(generic_secondary_smp_init)
* Turn the MMU off.
* Assumes we're mapped EA == RA if the MMU is on.
*/
+#ifdef CONFIG_PPC_BOOK3S
_STATIC(__mmu_off)
mfmsr r3
andi. r0,r3,MSR_IR|MSR_DR
@@ -243,6 +278,7 @@ _STATIC(__mmu_off)
sync
rfid
b . /* prevent speculative execution */
+#endif
/*
@@ -280,6 +316,10 @@ _GLOBAL(__start_initialization_multiplatform)
mr r31,r3
mr r30,r4
+#ifdef CONFIG_PPC_BOOK3E
+ bl .start_initialization_book3e
+ b .__after_prom_start
+#else
/* Setup some critical 970 SPRs before switching MMU off */
mfspr r0,SPRN_PVR
srwi r0,r0,16
@@ -297,6 +337,7 @@ _GLOBAL(__start_initialization_multiplatform)
/* Switch off MMU if not already off */
bl .__mmu_off
b .__after_prom_start
+#endif /* CONFIG_PPC_BOOK3E */
_INIT_STATIC(__boot_from_prom)
#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
@@ -359,10 +400,16 @@ _STATIC(__after_prom_start)
* Note: This process overwrites the OF exception vectors.
*/
li r3,0 /* target addr */
+#ifdef CONFIG_PPC_BOOK3E
+ tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */
+#endif
mr. r4,r26 /* In some cases the loader may */
beq 9f /* have already put us at zero */
li r6,0x100 /* Start offset, the first 0x100 */
/* bytes were copied earlier. */
+#ifdef CONFIG_PPC_BOOK3E
+ tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */
+#endif
#ifdef CONFIG_CRASH_DUMP
/*
@@ -485,7 +532,7 @@ _GLOBAL(pmac_secondary_start)
LOAD_REG_ADDR(r4,paca) /* Get base vaddr of paca array */
mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */
add r13,r13,r4 /* for this processor. */
- mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
+ mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG*/
/* Create a temp kernel stack for use before relocation is on. */
ld r1,PACAEMERGSP(r13)
@@ -503,11 +550,14 @@ _GLOBAL(pmac_secondary_start)
* 1. Processor number
* 2. Segment table pointer (virtual address)
* On entry the following are set:
- * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries
- * r24 = cpu# (in Linux terms)
- * r13 = paca virtual address
- * SPRG3 = paca virtual address
+ * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries
+ * r24 = cpu# (in Linux terms)
+ * r13 = paca virtual address
+ * SPRG_PACA = paca virtual address
*/
+ .section ".text";
+ .align 2 ;
+
.globl __secondary_start
__secondary_start:
/* Set thread priority to MEDIUM */
@@ -544,7 +594,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
- rfid
+ RFI
b . /* prevent speculative execution */
/*
@@ -565,11 +615,16 @@ _GLOBAL(start_secondary_prolog)
*/
_GLOBAL(enable_64b_mode)
mfmsr r11 /* grab the current MSR */
+#ifdef CONFIG_PPC_BOOK3E
+ oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */
+ mtmsr r11
+#else /* CONFIG_PPC_BOOK3E */
li r12,(MSR_SF | MSR_ISF)@highest
sldi r12,r12,48
or r11,r11,r12
mtmsrd r11
isync
+#endif
blr
/*
@@ -613,9 +668,11 @@ _INIT_STATIC(start_here_multiplatform)
bdnz 3b
4:
+#ifndef CONFIG_PPC_BOOK3E
mfmsr r6
ori r6,r6,MSR_RI
mtmsrd r6 /* RI on */
+#endif
#ifdef CONFIG_RELOCATABLE
/* Save the physical address we're running at in kernstart_addr */
@@ -642,13 +699,13 @@ _INIT_STATIC(start_here_multiplatform)
/* Restore parameters passed from prom_init/kexec */
mr r3,r31
- bl .early_setup /* also sets r13 and SPRG3 */
+ bl .early_setup /* also sets r13 and SPRG_PACA */
LOAD_REG_ADDR(r3, .start_here_common)
ld r4,PACAKMSR(r13)
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
- rfid
+ RFI
b . /* prevent speculative execution */
/* This is where all platforms converge execution */
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 52ff8c53b93..6ded19d0189 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -110,8 +110,8 @@ turn_on_mmu:
* task's thread_struct.
*/
#define EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; \
- mtspr SPRN_SPRG1,r11; \
+ mtspr SPRN_SPRG_SCRATCH0,r10; \
+ mtspr SPRN_SPRG_SCRATCH1,r11; \
mfcr r10; \
EXCEPTION_PROLOG_1; \
EXCEPTION_PROLOG_2
@@ -121,7 +121,7 @@ turn_on_mmu:
andi. r11,r11,MSR_PR; \
tophys(r11,r1); /* use tophys(r1) if kernel */ \
beq 1f; \
- mfspr r11,SPRN_SPRG3; \
+ mfspr r11,SPRN_SPRG_THREAD; \
lwz r11,THREAD_INFO-THREAD(r11); \
addi r11,r11,THREAD_SIZE; \
tophys(r11,r11); \
@@ -133,9 +133,9 @@ turn_on_mmu:
stw r10,_CCR(r11); /* save registers */ \
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
+ mfspr r10,SPRN_SPRG_SCRATCH0; \
stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
+ mfspr r12,SPRN_SPRG_SCRATCH1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
@@ -603,8 +603,9 @@ start_here:
/* ptr to phys current thread */
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
li r3,0
+ /* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
mtspr SPRN_SPRG2,r3 /* 0 => r1 has kernel sp */
/* stack */
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 5f9febc8d14..50504ae39cb 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -20,14 +20,14 @@
#endif
#define NORMAL_EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
- mtspr SPRN_SPRG1,r11; \
- mtspr SPRN_SPRG4W,r1; \
+ mtspr SPRN_SPRG_WSCRATCH0,r10;/* save two registers to work with */\
+ mtspr SPRN_SPRG_WSCRATCH1,r11; \
+ mtspr SPRN_SPRG_WSCRATCH2,r1; \
mfcr r10; /* save CR in r10 for now */\
mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
andi. r11,r11,MSR_PR; \
beq 1f; \
- mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
+ mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
ALLOC_STACK_FRAME(r1, THREAD_SIZE); \
1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
@@ -35,13 +35,13 @@
stw r10,_CCR(r11); /* save various registers */\
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
+ mfspr r10,SPRN_SPRG_RSCRATCH0; \
stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
+ mfspr r12,SPRN_SPRG_RSCRATCH1; \
stw r12,GPR11(r11); \
mflr r10; \
stw r10,_LINK(r11); \
- mfspr r10,SPRN_SPRG4R; \
+ mfspr r10,SPRN_SPRG_RSCRATCH2; \
mfspr r12,SPRN_SRR0; \
stw r10,GPR1(r11); \
mfspr r9,SPRN_SRR1; \
@@ -69,21 +69,11 @@
* providing configurations that micro-optimize space usage.
*/
-/* CRIT_SPRG only used in critical exception handling */
-#define CRIT_SPRG SPRN_SPRG2
-/* MCHECK_SPRG only used in machine check exception handling */
-#define MCHECK_SPRG SPRN_SPRG6W
-
-#define MCHECK_STACK_BASE mcheckirq_ctx
+#define MC_STACK_BASE mcheckirq_ctx
#define CRIT_STACK_BASE critirq_ctx
/* only on e500mc/e200 */
-#define DEBUG_STACK_BASE dbgirq_ctx
-#ifdef CONFIG_E200
-#define DEBUG_SPRG SPRN_SPRG6W
-#else
-#define DEBUG_SPRG SPRN_SPRG9
-#endif
+#define DBG_STACK_BASE dbgirq_ctx
#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
@@ -110,7 +100,7 @@
* critical/machine check exception stack at low physical addresses.
*/
#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
- mtspr exc_level##_SPRG,r8; \
+ mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
stw r9,GPR9(r8); /* save various registers */\
mfcr r9; /* save CR in r9 for now */\
@@ -119,7 +109,7 @@
stw r9,_CCR(r8); /* save CR on stack */\
mfspr r10,exc_level_srr1; /* check whether user or kernel */\
andi. r10,r10,MSR_PR; \
- mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
+ mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
beq 1f; \
@@ -140,7 +130,7 @@
lwz r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11); \
stw r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8); \
mr r11,r8; \
-2: mfspr r8,exc_level##_SPRG; \
+2: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \
stw r12,GPR12(r11); /* save various registers */\
mflr r10; \
stw r10,_LINK(r11); \
@@ -161,9 +151,9 @@
#define CRITICAL_EXCEPTION_PROLOG \
EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
#define DEBUG_EXCEPTION_PROLOG \
- EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
+ EXC_LEVEL_EXCEPTION_PROLOG(DBG, SPRN_DSRR0, SPRN_DSRR1)
#define MCHECK_EXCEPTION_PROLOG \
- EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
+ EXC_LEVEL_EXCEPTION_PROLOG(MC, SPRN_MCSRR0, SPRN_MCSRR1)
/*
* Exception vectors.
@@ -282,13 +272,13 @@ label:
mtspr SPRN_DSRR1,r9; \
lwz r9,GPR9(r11); \
lwz r12,GPR12(r11); \
- mtspr DEBUG_SPRG,r8; \
- BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
+ mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \
+ BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
lwz r10,GPR10(r8); \
lwz r11,GPR11(r8); \
- mfspr r8,DEBUG_SPRG; \
+ mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \
\
- PPC_RFDI; \
+ PPC_RFDI; \
b .; \
\
/* continue normal handling for a debug exception... */ \
@@ -335,11 +325,11 @@ label:
mtspr SPRN_CSRR1,r9; \
lwz r9,GPR9(r11); \
lwz r12,GPR12(r11); \
- mtspr CRIT_SPRG,r8; \
+ mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
lwz r10,GPR10(r8); \
lwz r11,GPR11(r8); \
- mfspr r8,CRIT_SPRG; \
+ mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \
\
rfci; \
b .; \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 5bdcc06d294..975788ca05d 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -361,7 +361,7 @@ skpinv: addi r6,r6,1 /* Increment */
/* ptr to current thread */
addi r4,r2,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
/* stack */
lis r1,init_thread_union@h
@@ -532,12 +532,12 @@ interrupt_base:
/* Data TLB Error Interrupt */
START_EXCEPTION(DataTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
+ mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1, r11
+ mtspr SPRN_SPRG_WSCRATCH2, r12
+ mtspr SPRN_SPRG_WSCRATCH3, r13
mfcr r11
- mtspr SPRN_SPRG7W, r11
+ mtspr SPRN_SPRG_WSCRATCH4, r11
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -557,7 +557,7 @@ interrupt_base:
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
@@ -575,7 +575,12 @@ interrupt_base:
* place or can we save a couple of instructions here ?
*/
mfspr r12,SPRN_ESR
+#ifdef CONFIG_PTE_64BIT
+ li r13,_PAGE_PRESENT
+ oris r13,r13,_PAGE_ACCESSED@h
+#else
li r13,_PAGE_PRESENT|_PAGE_ACCESSED
+#endif
rlwimi r13,r12,11,29,29
FIND_PTE
@@ -598,12 +603,12 @@ interrupt_base:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
b DataStorage
/* Instruction TLB Error Interrupt */
@@ -613,12 +618,12 @@ interrupt_base:
* to a different point.
*/
START_EXCEPTION(InstructionTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
+ mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG_WSCRATCH1, r11
+ mtspr SPRN_SPRG_WSCRATCH2, r12
+ mtspr SPRN_SPRG_WSCRATCH3, r13
mfcr r11
- mtspr SPRN_SPRG7W, r11
+ mtspr SPRN_SPRG_WSCRATCH4, r11
mfspr r10, SPRN_SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -638,12 +643,17 @@ interrupt_base:
/* Get the PGD for the current thread */
3:
- mfspr r11,SPRN_SPRG3
+ mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
/* Make up the required permissions */
- li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+#ifdef CONFIG_PTE_64BIT
+ li r13,_PAGE_PRESENT | _PAGE_EXEC
+ oris r13,r13,_PAGE_ACCESSED@h
+#else
+ li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+#endif
FIND_PTE
andc. r13,r13,r11 /* Check permission */
@@ -666,12 +676,12 @@ interrupt_base:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
b InstructionStorage
#ifdef CONFIG_SPE
@@ -733,7 +743,7 @@ finish_tlb_load:
mfspr r12, SPRN_MAS2
#ifdef CONFIG_PTE_64BIT
- rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */
+ rlwimi r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */
#else
rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */
#endif
@@ -742,23 +752,27 @@ finish_tlb_load:
#endif
mtspr SPRN_MAS2, r12
- li r10, (_PAGE_HWEXEC | _PAGE_PRESENT)
- rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */
- and r12, r11, r10
- andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */
- slwi r10, r12, 1
- or r10, r10, r12
- iseleq r12, r12, r10
-
#ifdef CONFIG_PTE_64BIT
- rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */
- rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */
+ rlwinm r12, r11, 32-2, 26, 31 /* Move in perm bits */
+ andi. r10, r11, _PAGE_DIRTY
+ bne 1f
+ li r10, MAS3_SW | MAS3_UW
+ andc r12, r12, r10
+1: rlwimi r12, r13, 20, 0, 11 /* grab RPN[32:43] */
+ rlwimi r12, r11, 20, 12, 19 /* grab RPN[44:51] */
mtspr SPRN_MAS3, r12
BEGIN_MMU_FTR_SECTION
- srwi r10, r13, 8 /* grab RPN[8:31] */
+ srwi r10, r13, 12 /* grab RPN[12:31] */
mtspr SPRN_MAS7, r10
END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
#else
+ li r10, (_PAGE_EXEC | _PAGE_PRESENT)
+ rlwimi r10, r11, 31, 29, 29 /* extract _PAGE_DIRTY into SW */
+ and r12, r11, r10
+ andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */
+ slwi r10, r12, 1
+ or r10, r10, r12
+ iseleq r12, r12, r10
rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
mtspr SPRN_MAS3, r11
#endif
@@ -790,12 +804,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
tlbwe
/* Done...restore registers and get out of here. */
- mfspr r11, SPRN_SPRG7R
+ mfspr r11, SPRN_SPRG_RSCRATCH4
mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
+ mfspr r13, SPRN_SPRG_RSCRATCH3
+ mfspr r12, SPRN_SPRG_RSCRATCH2
+ mfspr r11, SPRN_SPRG_RSCRATCH1
+ mfspr r10, SPRN_SPRG_RSCRATCH0
rfi /* Force context change */
#ifdef CONFIG_SPE
@@ -839,7 +853,7 @@ load_up_spe:
#endif /* !CONFIG_SMP */
/* enable use of SPE after return */
oris r9,r9,MSR_SPE@h
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
li r4,1
li r10,THREAD_ACC
stw r4,THREAD_USED_SPE(r5)
@@ -1118,7 +1132,7 @@ __secondary_start:
/* ptr to current thread */
addi r4,r2,THREAD /* address of our thread_struct */
- mtspr SPRN_SPRG3,r4
+ mtspr SPRN_SPRG_THREAD,r4
/* Setup the defaults for TLB entries */
li r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 6e3f6249365..a4c8b38b0ba 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -127,7 +127,7 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask)
return 1;
}
-static struct dma_mapping_ops ibmebus_dma_ops = {
+static struct dma_map_ops ibmebus_dma_ops = {
.alloc_coherent = ibmebus_alloc_coherent,
.free_coherent = ibmebus_free_coherent,
.map_sg = ibmebus_map_sg,
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 2419cc706ff..ed0ac4e4b8d 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -35,6 +35,7 @@
#include <asm/prom.h>
#include <asm/vdso_datapage.h>
#include <asm/vio.h>
+#include <asm/mmu.h>
#define MODULE_VERS "1.8"
#define MODULE_NAME "lparcfg"
@@ -537,6 +538,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
seq_printf(m, "shared_processor_mode=%d\n", lppaca[0].shared_proc);
+ seq_printf(m, "slb_size=%d\n", mmu_slb_size);
+
return 0;
}
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 15f28e0de78..da9c0c4c10f 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -342,10 +342,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
addi r3,r3,L1_CACHE_BYTES
bdnz 1b
sync /* wait for dcbst's to get to ram */
+#ifndef CONFIG_44x
mtctr r4
2: icbi 0,r6
addi r6,r6,L1_CACHE_BYTES
bdnz 2b
+#else
+ /* Flash invalidate on 44x because we are passed kmapped addresses and
+ this doesn't work for userspace pages due to the virtually tagged
+ icache. Sigh. */
+ iccci 0, r0
+#endif
sync /* additional sync needed on g4 */
isync
blr
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 87df428e358..1a4fc0d11a0 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -276,7 +276,7 @@ static int __devinit of_pci_phb_probe(struct of_device *dev,
#endif /* CONFIG_EEH */
/* Scan the bus */
- scan_phb(phb);
+ pcibios_scan_phb(phb, dev->node);
if (phb->bus == NULL)
return -ENXIO;
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index e9962c7f8a0..d16b1ea55d4 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -13,6 +13,7 @@
#include <asm/lppaca.h>
#include <asm/paca.h>
#include <asm/sections.h>
+#include <asm/pgtable.h>
/* This symbol is provided by the linker - let it fill in the paca
* field correctly */
@@ -87,6 +88,8 @@ void __init initialise_pacas(void)
#ifdef CONFIG_PPC_BOOK3S
new_paca->lppaca_ptr = &lppaca[cpu];
+#else
+ new_paca->kernel_pgd = swapper_pg_dir;
#endif
new_paca->lock_token = 0x8000;
new_paca->paca_index = cpu;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 5a56e97c5ac..e9f4840096b 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -50,14 +50,14 @@ resource_size_t isa_mem_base;
unsigned int ppc_pci_flags = 0;
-static struct dma_mapping_ops *pci_dma_ops = &dma_direct_ops;
+static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
-void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
+void set_pci_dma_ops(struct dma_map_ops *dma_ops)
{
pci_dma_ops = dma_ops;
}
-struct dma_mapping_ops *get_pci_dma_ops(void)
+struct dma_map_ops *get_pci_dma_ops(void)
{
return pci_dma_ops;
}
@@ -176,8 +176,6 @@ int pci_domain_nr(struct pci_bus *bus)
}
EXPORT_SYMBOL(pci_domain_nr);
-#ifdef CONFIG_PPC_OF
-
/* This routine is meant to be used early during boot, when the
* PCI bus numbers have not yet been assigned, and you need to
* issue PCI config cycles to an OF device.
@@ -210,17 +208,11 @@ static ssize_t pci_show_devspec(struct device *dev,
return sprintf(buf, "%s", np->full_name);
}
static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-#endif /* CONFIG_PPC_OF */
/* Add sysfs properties */
int pcibios_add_platform_entries(struct pci_dev *pdev)
{
-#ifdef CONFIG_PPC_OF
return device_create_file(&pdev->dev, &dev_attr_devspec);
-#else
- return 0;
-#endif /* CONFIG_PPC_OF */
-
}
char __devinit *pcibios_setup(char *str)
@@ -1626,3 +1618,122 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
}
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type) \
+static int \
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
+{ \
+ return PCIBIOS_DEVICE_NOT_FOUND; \
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+ .read = null_read_config,
+ .write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+ static struct pci_bus bus;
+
+ if (hose == 0) {
+ printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+ }
+ bus.number = busnr;
+ bus.sysdata = hose;
+ bus.ops = hose? hose->ops: &null_pci_ops;
+ return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type) \
+int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
+ int devfn, int offset, type value) \
+{ \
+ return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
+ devfn, offset, value); \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+ int cap)
+{
+ return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
+
+/**
+ * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
+ * @hose: Pointer to the PCI host controller instance structure
+ * @sysdata: value to use for sysdata pointer. ppc32 and ppc64 differ here
+ *
+ * Note: the 'data' pointer is a temporary measure. As 32 and 64 bit
+ * pci code gets merged, this parameter should become unnecessary because
+ * both will use the same value.
+ */
+void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata)
+{
+ struct pci_bus *bus;
+ struct device_node *node = hose->dn;
+ int mode;
+
+ pr_debug("PCI: Scanning PHB %s\n",
+ node ? node->full_name : "<NO NAME>");
+
+ /* Create an empty bus for the toplevel */
+ bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops,
+ sysdata);
+ if (bus == NULL) {
+ pr_err("Failed to create bus for PCI domain %04x\n",
+ hose->global_number);
+ return;
+ }
+ bus->secondary = hose->first_busno;
+ hose->bus = bus;
+
+ /* Get some IO space for the new PHB */
+ pcibios_setup_phb_io_space(hose);
+
+ /* Wire up PHB bus resources */
+ pcibios_setup_phb_resources(hose);
+
+ /* Get probe mode and perform scan */
+ mode = PCI_PROBE_NORMAL;
+ if (node && ppc_md.pci_probe_mode)
+ mode = ppc_md.pci_probe_mode(bus);
+ pr_debug(" probe mode: %d\n", mode);
+ if (mode == PCI_PROBE_DEVTREE) {
+ bus->subordinate = hose->last_busno;
+ of_scan_bus(node, bus);
+ }
+
+ if (mode == PCI_PROBE_NORMAL)
+ hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 3ae1c666ff9..c13668cf36d 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -34,9 +34,7 @@ int pcibios_assign_bus_offset = 1;
void pcibios_make_OF_bus_map(void);
static void fixup_cpc710_pci64(struct pci_dev* dev);
-#ifdef CONFIG_PPC_OF
static u8* pci_to_OF_bus_map;
-#endif
/* By default, we don't re-assign bus numbers. We do this only on
* some pmacs
@@ -83,7 +81,6 @@ fixup_cpc710_pci64(struct pci_dev* dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
-#ifdef CONFIG_PPC_OF
/*
* Functions below are used on OpenFirmware machines.
*/
@@ -357,42 +354,15 @@ pci_create_OF_bus_map(void)
}
}
-#else /* CONFIG_PPC_OF */
-void pcibios_make_OF_bus_map(void)
+void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
{
-}
-#endif /* CONFIG_PPC_OF */
-
-static void __devinit pcibios_scan_phb(struct pci_controller *hose)
-{
- struct pci_bus *bus;
- struct device_node *node = hose->dn;
unsigned long io_offset;
struct resource *res = &hose->io_resource;
- pr_debug("PCI: Scanning PHB %s\n",
- node ? node->full_name : "<NO NAME>");
-
- /* Create an empty bus for the toplevel */
- bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
- if (bus == NULL) {
- printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
- hose->global_number);
- return;
- }
- bus->secondary = hose->first_busno;
- hose->bus = bus;
-
/* Fixup IO space offset */
io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
res->start = (res->start + io_offset) & 0xffffffffu;
res->end = (res->end + io_offset) & 0xffffffffu;
-
- /* Wire up PHB bus resources */
- pcibios_setup_phb_resources(hose);
-
- /* Scan children */
- hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
}
static int __init pcibios_init(void)
@@ -410,7 +380,7 @@ static int __init pcibios_init(void)
if (pci_assign_all_buses)
hose->first_busno = next_busno;
hose->last_busno = 0xff;
- pcibios_scan_phb(hose);
+ pcibios_scan_phb(hose, hose);
pci_bus_add_devices(hose->bus);
if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset;
@@ -478,75 +448,4 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
return result;
}
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type) \
-static int \
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
-{ \
- return PCIBIOS_DEVICE_NOT_FOUND; \
-}
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 *val)
-{
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 val)
-{
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
- .read = null_read_config,
- .write = null_write_config,
-};
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
- static struct pci_bus bus;
-
- if (hose == 0) {
- hose = pci_bus_to_hose(busnr);
- if (hose == 0)
- printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
- }
- bus.number = busnr;
- bus.sysdata = hose;
- bus.ops = hose? hose->ops: &null_pci_ops;
- return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type) \
-int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
- int devfn, int offset, type value) \
-{ \
- return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
- devfn, offset, value); \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
-int early_find_capability(struct pci_controller *hose, int bus, int devfn,
- int cap)
-{
- return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
-}
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 9e8902fa14c..ba949a2c93a 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,334 +43,6 @@ unsigned long pci_probe_only = 1;
unsigned long pci_io_base = ISA_IO_BASE;
EXPORT_SYMBOL(pci_io_base);
-static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
-{
- const u32 *prop;
- int len;
-
- prop = of_get_property(np, name, &len);
- if (prop && len >= 4)
- return *prop;
- return def;
-}
-
-static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
-{
- unsigned int flags = 0;
-
- if (addr0 & 0x02000000) {
- flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
- flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
- flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
- if (addr0 & 0x40000000)
- flags |= IORESOURCE_PREFETCH
- | PCI_BASE_ADDRESS_MEM_PREFETCH;
- /* Note: We don't know whether the ROM has been left enabled
- * by the firmware or not. We mark it as disabled (ie, we do
- * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
- * do a config space read, it will be force-enabled if needed
- */
- if (!bridge && (addr0 & 0xff) == 0x30)
- flags |= IORESOURCE_READONLY;
- } else if (addr0 & 0x01000000)
- flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
- if (flags)
- flags |= IORESOURCE_SIZEALIGN;
- return flags;
-}
-
-
-static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
-{
- u64 base, size;
- unsigned int flags;
- struct resource *res;
- const u32 *addrs;
- u32 i;
- int proplen;
-
- addrs = of_get_property(node, "assigned-addresses", &proplen);
- if (!addrs)
- return;
- pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
- for (; proplen >= 20; proplen -= 20, addrs += 5) {
- flags = pci_parse_of_flags(addrs[0], 0);
- if (!flags)
- continue;
- base = of_read_number(&addrs[1], 2);
- size = of_read_number(&addrs[3], 2);
- if (!size)
- continue;
- i = addrs[0] & 0xff;
- pr_debug(" base: %llx, size: %llx, i: %x\n",
- (unsigned long long)base,
- (unsigned long long)size, i);
-
- if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
- res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
- } else if (i == dev->rom_base_reg) {
- res = &dev->resource[PCI_ROM_RESOURCE];
- flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
- } else {
- printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
- continue;
- }
- res->start = base;
- res->end = base + size - 1;
- res->flags = flags;
- res->name = pci_name(dev);
- }
-}
-
-struct pci_dev *of_create_pci_dev(struct device_node *node,
- struct pci_bus *bus, int devfn)
-{
- struct pci_dev *dev;
- const char *type;
-
- dev = alloc_pci_dev();
- if (!dev)
- return NULL;
- type = of_get_property(node, "device_type", NULL);
- if (type == NULL)
- type = "";
-
- pr_debug(" create device, devfn: %x, type: %s\n", devfn, type);
-
- dev->bus = bus;
- dev->sysdata = node;
- dev->dev.parent = bus->bridge;
- dev->dev.bus = &pci_bus_type;
- dev->devfn = devfn;
- dev->multifunction = 0; /* maybe a lie? */
-
- dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
- dev->device = get_int_prop(node, "device-id", 0xffff);
- dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
- dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
-
- dev->cfg_size = pci_cfg_space_size(dev);
-
- dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
- dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
- dev->class = get_int_prop(node, "class-code", 0);
- dev->revision = get_int_prop(node, "revision-id", 0);
-
- pr_debug(" class: 0x%x\n", dev->class);
- pr_debug(" revision: 0x%x\n", dev->revision);
-
- dev->current_state = 4; /* unknown power state */
- dev->error_state = pci_channel_io_normal;
- dev->dma_mask = 0xffffffff;
-
- if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
- /* a PCI-PCI bridge */
- dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
- dev->rom_base_reg = PCI_ROM_ADDRESS1;
- } else if (!strcmp(type, "cardbus")) {
- dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
- } else {
- dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
- dev->rom_base_reg = PCI_ROM_ADDRESS;
- /* Maybe do a default OF mapping here */
- dev->irq = NO_IRQ;
- }
-
- pci_parse_of_addrs(node, dev);
-
- pr_debug(" adding to system ...\n");
-
- pci_device_add(dev, bus);
-
- return dev;
-}
-EXPORT_SYMBOL(of_create_pci_dev);
-
-static void __devinit __of_scan_bus(struct device_node *node,
- struct pci_bus *bus, int rescan_existing)
-{
- struct device_node *child;
- const u32 *reg;
- int reglen, devfn;
- struct pci_dev *dev;
-
- pr_debug("of_scan_bus(%s) bus no %d... \n",
- node->full_name, bus->number);
-
- /* Scan direct children */
- for_each_child_of_node(node, child) {
- pr_debug(" * %s\n", child->full_name);
- reg = of_get_property(child, "reg", &reglen);
- if (reg == NULL || reglen < 20)
- continue;
- devfn = (reg[0] >> 8) & 0xff;
-
- /* create a new pci_dev for this device */
- dev = of_create_pci_dev(child, bus, devfn);
- if (!dev)
- continue;
- pr_debug(" dev header type: %x\n", dev->hdr_type);
- }
-
- /* Apply all fixups necessary. We don't fixup the bus "self"
- * for an existing bridge that is being rescanned
- */
- if (!rescan_existing)
- pcibios_setup_bus_self(bus);
- pcibios_setup_bus_devices(bus);
-
- /* Now scan child busses */
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
- dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
- struct device_node *child = pci_device_to_OF_node(dev);
- if (dev)
- of_scan_pci_bridge(child, dev);
- }
- }
-}
-
-void __devinit of_scan_bus(struct device_node *node,
- struct pci_bus *bus)
-{
- __of_scan_bus(node, bus, 0);
-}
-EXPORT_SYMBOL_GPL(of_scan_bus);
-
-void __devinit of_rescan_bus(struct device_node *node,
- struct pci_bus *bus)
-{
- __of_scan_bus(node, bus, 1);
-}
-EXPORT_SYMBOL_GPL(of_rescan_bus);
-
-void __devinit of_scan_pci_bridge(struct device_node *node,
- struct pci_dev *dev)
-{
- struct pci_bus *bus;
- const u32 *busrange, *ranges;
- int len, i, mode;
- struct resource *res;
- unsigned int flags;
- u64 size;
-
- pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
-
- /* parse bus-range property */
- busrange = of_get_property(node, "bus-range", &len);
- if (busrange == NULL || len != 8) {
- printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
- node->full_name);
- return;
- }
- ranges = of_get_property(node, "ranges", &len);
- if (ranges == NULL) {
- printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
- node->full_name);
- return;
- }
-
- bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
- if (!bus) {
- printk(KERN_ERR "Failed to create pci bus for %s\n",
- node->full_name);
- return;
- }
-
- bus->primary = dev->bus->number;
- bus->subordinate = busrange[1];
- bus->bridge_ctl = 0;
- bus->sysdata = node;
-
- /* parse ranges property */
- /* PCI #address-cells == 3 and #size-cells == 2 always */
- res = &dev->resource[PCI_BRIDGE_RESOURCES];
- for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
- res->flags = 0;
- bus->resource[i] = res;
- ++res;
- }
- i = 1;
- for (; len >= 32; len -= 32, ranges += 8) {
- flags = pci_parse_of_flags(ranges[0], 1);
- size = of_read_number(&ranges[6], 2);
- if (flags == 0 || size == 0)
- continue;
- if (flags & IORESOURCE_IO) {
- res = bus->resource[0];
- if (res->flags) {
- printk(KERN_ERR "PCI: ignoring extra I/O range"
- " for bridge %s\n", node->full_name);
- continue;
- }
- } else {
- if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
- printk(KERN_ERR "PCI: too many memory ranges"
- " for bridge %s\n", node->full_name);
- continue;
- }
- res = bus->resource[i];
- ++i;
- }
- res->start = of_read_number(&ranges[1], 2);
- res->end = res->start + size - 1;
- res->flags = flags;
- }
- sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
- bus->number);
- pr_debug(" bus name: %s\n", bus->name);
-
- mode = PCI_PROBE_NORMAL;
- if (ppc_md.pci_probe_mode)
- mode = ppc_md.pci_probe_mode(bus);
- pr_debug(" probe mode: %d\n", mode);
-
- if (mode == PCI_PROBE_DEVTREE)
- of_scan_bus(node, bus);
- else if (mode == PCI_PROBE_NORMAL)
- pci_scan_child_bus(bus);
-}
-EXPORT_SYMBOL(of_scan_pci_bridge);
-
-void __devinit scan_phb(struct pci_controller *hose)
-{
- struct pci_bus *bus;
- struct device_node *node = hose->dn;
- int mode;
-
- pr_debug("PCI: Scanning PHB %s\n",
- node ? node->full_name : "<NO NAME>");
-
- /* Create an empty bus for the toplevel */
- bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
- if (bus == NULL) {
- printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
- hose->global_number);
- return;
- }
- bus->secondary = hose->first_busno;
- hose->bus = bus;
-
- /* Get some IO space for the new PHB */
- pcibios_map_io_space(bus);
-
- /* Wire up PHB bus resources */
- pcibios_setup_phb_resources(hose);
-
- /* Get probe mode and perform scan */
- mode = PCI_PROBE_NORMAL;
- if (node && ppc_md.pci_probe_mode)
- mode = ppc_md.pci_probe_mode(bus);
- pr_debug(" probe mode: %d\n", mode);
- if (mode == PCI_PROBE_DEVTREE) {
- bus->subordinate = hose->last_busno;
- of_scan_bus(node, bus);
- }
-
- if (mode == PCI_PROBE_NORMAL)
- hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
-}
-
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
@@ -392,7 +64,7 @@ static int __init pcibios_init(void)
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
- scan_phb(hose);
+ pcibios_scan_phb(hose, hose->dn);
pci_bus_add_devices(hose->bus);
}
@@ -526,6 +198,11 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
}
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
+void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
+{
+ pcibios_map_io_space(hose->bus);
+}
+
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
new file mode 100644
index 00000000000..72c31bcb7aa
--- /dev/null
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -0,0 +1,358 @@
+/*
+ * Helper routines to scan the device tree for PCI devices and busses
+ *
+ * Migrated out of PowerPC architecture pci_64.c file by Grant Likely
+ * <grant.likely@secretlab.ca> so that these routines are available for
+ * 32 bit also.
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Rework, based on alpha PCI code.
+ * Copyright (c) 2009 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+
+/**
+ * get_int_prop - Decode a u32 from a device tree property
+ */
+static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
+{
+ const u32 *prop;
+ int len;
+
+ prop = of_get_property(np, name, &len);
+ if (prop && len >= 4)
+ return *prop;
+ return def;
+}
+
+/**
+ * pci_parse_of_flags - Parse the flags cell of a device tree PCI address
+ * @addr0: value of 1st cell of a device tree PCI address.
+ * @bridge: Set this flag if the address is from a bridge 'ranges' property
+ */
+unsigned int pci_parse_of_flags(u32 addr0, int bridge)
+{
+ unsigned int flags = 0;
+
+ if (addr0 & 0x02000000) {
+ flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
+ flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
+ flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
+ if (addr0 & 0x40000000)
+ flags |= IORESOURCE_PREFETCH
+ | PCI_BASE_ADDRESS_MEM_PREFETCH;
+ /* Note: We don't know whether the ROM has been left enabled
+ * by the firmware or not. We mark it as disabled (ie, we do
+ * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+ * do a config space read, it will be force-enabled if needed
+ */
+ if (!bridge && (addr0 & 0xff) == 0x30)
+ flags |= IORESOURCE_READONLY;
+ } else if (addr0 & 0x01000000)
+ flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+ if (flags)
+ flags |= IORESOURCE_SIZEALIGN;
+ return flags;
+}
+
+/**
+ * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node
+ * @node: device tree node for the PCI device
+ * @dev: pci_dev structure for the device
+ *
+ * This function parses the 'assigned-addresses' property of a PCI devices'
+ * device tree node and writes them into the associated pci_dev structure.
+ */
+static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
+{
+ u64 base, size;
+ unsigned int flags;
+ struct resource *res;
+ const u32 *addrs;
+ u32 i;
+ int proplen;
+
+ addrs = of_get_property(node, "assigned-addresses", &proplen);
+ if (!addrs)
+ return;
+ pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
+ for (; proplen >= 20; proplen -= 20, addrs += 5) {
+ flags = pci_parse_of_flags(addrs[0], 0);
+ if (!flags)
+ continue;
+ base = of_read_number(&addrs[1], 2);
+ size = of_read_number(&addrs[3], 2);
+ if (!size)
+ continue;
+ i = addrs[0] & 0xff;
+ pr_debug(" base: %llx, size: %llx, i: %x\n",
+ (unsigned long long)base,
+ (unsigned long long)size, i);
+
+ if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
+ res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
+ } else if (i == dev->rom_base_reg) {
+ res = &dev->resource[PCI_ROM_RESOURCE];
+ flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
+ } else {
+ printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
+ continue;
+ }
+ res->start = base;
+ res->end = base + size - 1;
+ res->flags = flags;
+ res->name = pci_name(dev);
+ }
+}
+
+/**
+ * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev
+ * @node: device tree node pointer
+ * @bus: bus the device is sitting on
+ * @devfn: PCI function number, extracted from device tree by caller.
+ */
+struct pci_dev *of_create_pci_dev(struct device_node *node,
+ struct pci_bus *bus, int devfn)
+{
+ struct pci_dev *dev;
+ const char *type;
+
+ dev = alloc_pci_dev();
+ if (!dev)
+ return NULL;
+ type = of_get_property(node, "device_type", NULL);
+ if (type == NULL)
+ type = "";
+
+ pr_debug(" create device, devfn: %x, type: %s\n", devfn, type);
+
+ dev->bus = bus;
+ dev->sysdata = node;
+ dev->dev.parent = bus->bridge;
+ dev->dev.bus = &pci_bus_type;
+ dev->devfn = devfn;
+ dev->multifunction = 0; /* maybe a lie? */
+
+ dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
+ dev->device = get_int_prop(node, "device-id", 0xffff);
+ dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
+ dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
+
+ dev->cfg_size = pci_cfg_space_size(dev);
+
+ dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+ dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+ dev->class = get_int_prop(node, "class-code", 0);
+ dev->revision = get_int_prop(node, "revision-id", 0);
+
+ pr_debug(" class: 0x%x\n", dev->class);
+ pr_debug(" revision: 0x%x\n", dev->revision);
+
+ dev->current_state = 4; /* unknown power state */
+ dev->error_state = pci_channel_io_normal;
+ dev->dma_mask = 0xffffffff;
+
+ if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+ /* a PCI-PCI bridge */
+ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
+ dev->rom_base_reg = PCI_ROM_ADDRESS1;
+ } else if (!strcmp(type, "cardbus")) {
+ dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
+ } else {
+ dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
+ dev->rom_base_reg = PCI_ROM_ADDRESS;
+ /* Maybe do a default OF mapping here */
+ dev->irq = NO_IRQ;
+ }
+
+ of_pci_parse_addrs(node, dev);
+
+ pr_debug(" adding to system ...\n");
+
+ pci_device_add(dev, bus);
+
+ return dev;
+}
+EXPORT_SYMBOL(of_create_pci_dev);
+
+/**
+ * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes
+ * @node: device tree node of bridge
+ * @dev: pci_dev structure for the bridge
+ *
+ * of_scan_bus() calls this routine for each PCI bridge that it finds, and
+ * this routine in turn call of_scan_bus() recusively to scan for more child
+ * devices.
+ */
+void __devinit of_scan_pci_bridge(struct device_node *node,
+ struct pci_dev *dev)
+{
+ struct pci_bus *bus;
+ const u32 *busrange, *ranges;
+ int len, i, mode;
+ struct resource *res;
+ unsigned int flags;
+ u64 size;
+
+ pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
+
+ /* parse bus-range property */
+ busrange = of_get_property(node, "bus-range", &len);
+ if (busrange == NULL || len != 8) {
+ printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
+ node->full_name);
+ return;
+ }
+ ranges = of_get_property(node, "ranges", &len);
+ if (ranges == NULL) {
+ printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
+ node->full_name);
+ return;
+ }
+
+ bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+ if (!bus) {
+ printk(KERN_ERR "Failed to create pci bus for %s\n",
+ node->full_name);
+ return;
+ }
+
+ bus->primary = dev->bus->number;
+ bus->subordinate = busrange[1];
+ bus->bridge_ctl = 0;
+ bus->sysdata = node;
+
+ /* parse ranges property */
+ /* PCI #address-cells == 3 and #size-cells == 2 always */
+ res = &dev->resource[PCI_BRIDGE_RESOURCES];
+ for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
+ res->flags = 0;
+ bus->resource[i] = res;
+ ++res;
+ }
+ i = 1;
+ for (; len >= 32; len -= 32, ranges += 8) {
+ flags = pci_parse_of_flags(ranges[0], 1);
+ size = of_read_number(&ranges[6], 2);
+ if (flags == 0 || size == 0)
+ continue;
+ if (flags & IORESOURCE_IO) {
+ res = bus->resource[0];
+ if (res->flags) {
+ printk(KERN_ERR "PCI: ignoring extra I/O range"
+ " for bridge %s\n", node->full_name);
+ continue;
+ }
+ } else {
+ if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
+ printk(KERN_ERR "PCI: too many memory ranges"
+ " for bridge %s\n", node->full_name);
+ continue;
+ }
+ res = bus->resource[i];
+ ++i;
+ }
+ res->start = of_read_number(&ranges[1], 2);
+ res->end = res->start + size - 1;
+ res->flags = flags;
+ }
+ sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
+ bus->number);
+ pr_debug(" bus name: %s\n", bus->name);
+
+ mode = PCI_PROBE_NORMAL;
+ if (ppc_md.pci_probe_mode)
+ mode = ppc_md.pci_probe_mode(bus);
+ pr_debug(" probe mode: %d\n", mode);
+
+ if (mode == PCI_PROBE_DEVTREE)
+ of_scan_bus(node, bus);
+ else if (mode == PCI_PROBE_NORMAL)
+ pci_scan_child_bus(bus);
+}
+EXPORT_SYMBOL(of_scan_pci_bridge);
+
+/**
+ * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ * @rescan_existing: Flag indicating bus has already been set up
+ */
+static void __devinit __of_scan_bus(struct device_node *node,
+ struct pci_bus *bus, int rescan_existing)
+{
+ struct device_node *child;
+ const u32 *reg;
+ int reglen, devfn;
+ struct pci_dev *dev;
+
+ pr_debug("of_scan_bus(%s) bus no %d... \n",
+ node->full_name, bus->number);
+
+ /* Scan direct children */
+ for_each_child_of_node(node, child) {
+ pr_debug(" * %s\n", child->full_name);
+ reg = of_get_property(child, "reg", &reglen);
+ if (reg == NULL || reglen < 20)
+ continue;
+ devfn = (reg[0] >> 8) & 0xff;
+
+ /* create a new pci_dev for this device */
+ dev = of_create_pci_dev(child, bus, devfn);
+ if (!dev)
+ continue;
+ pr_debug(" dev header type: %x\n", dev->hdr_type);
+ }
+
+ /* Apply all fixups necessary. We don't fixup the bus "self"
+ * for an existing bridge that is being rescanned
+ */
+ if (!rescan_existing)
+ pcibios_setup_bus_self(bus);
+ pcibios_setup_bus_devices(bus);
+
+ /* Now scan child busses */
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+ dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
+ struct device_node *child = pci_device_to_OF_node(dev);
+ if (dev)
+ of_scan_pci_bridge(child, dev);
+ }
+ }
+}
+
+/**
+ * of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ */
+void __devinit of_scan_bus(struct device_node *node,
+ struct pci_bus *bus)
+{
+ __of_scan_bus(node, bus, 0);
+}
+EXPORT_SYMBOL_GPL(of_scan_bus);
+
+/**
+ * of_rescan_bus - given a PCI bus node, scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ *
+ * Same as of_scan_bus, but for a pci_bus structure that has already been
+ * setup.
+ */
+void __devinit of_rescan_bus(struct device_node *node,
+ struct pci_bus *bus)
+{
+ __of_scan_bus(node, bus, 1);
+}
+EXPORT_SYMBOL_GPL(of_rescan_bus);
+
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 70e1f57f7dd..7ceefaf3a7f 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -32,6 +32,9 @@ struct cpu_hw_counters {
unsigned long mmcr[3];
struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS];
u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS];
+ u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+ unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+ unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
};
DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters);
@@ -62,7 +65,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
{
return 0;
}
-static inline void perf_set_pmu_inuse(int inuse) { }
static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { }
static inline u32 perf_get_misc_flags(struct pt_regs *regs)
{
@@ -93,11 +95,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
return 0;
}
-static inline void perf_set_pmu_inuse(int inuse)
-{
- get_lppaca()->pmcregs_in_use = inuse;
-}
-
/*
* The user wants a data address recorded.
* If we're not doing instruction sampling, give them the SDAR
@@ -245,13 +242,11 @@ static void write_pmc(int idx, unsigned long val)
* and see if any combination of alternative codes is feasible.
* The feasible set is returned in event[].
*/
-static int power_check_constraints(u64 event[], unsigned int cflags[],
+static int power_check_constraints(struct cpu_hw_counters *cpuhw,
+ u64 event[], unsigned int cflags[],
int n_ev)
{
unsigned long mask, value, nv;
- u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
- unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
- unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS];
int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS];
int i, j;
@@ -266,21 +261,23 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
if ((cflags[i] & PPMU_LIMITED_PMC_REQD)
&& !ppmu->limited_pmc_event(event[i])) {
ppmu->get_alternatives(event[i], cflags[i],
- alternatives[i]);
- event[i] = alternatives[i][0];
+ cpuhw->alternatives[i]);
+ event[i] = cpuhw->alternatives[i][0];
}
- if (ppmu->get_constraint(event[i], &amasks[i][0],
- &avalues[i][0]))
+ if (ppmu->get_constraint(event[i], &cpuhw->amasks[i][0],
+ &cpuhw->avalues[i][0]))
return -1;
}
value = mask = 0;
for (i = 0; i < n_ev; ++i) {
- nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf);
+ nv = (value | cpuhw->avalues[i][0]) +
+ (value & cpuhw->avalues[i][0] & addf);
if ((((nv + tadd) ^ value) & mask) != 0 ||
- (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0)
+ (((nv + tadd) ^ cpuhw->avalues[i][0]) &
+ cpuhw->amasks[i][0]) != 0)
break;
value = nv;
- mask |= amasks[i][0];
+ mask |= cpuhw->amasks[i][0];
}
if (i == n_ev)
return 0; /* all OK */
@@ -291,10 +288,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
for (i = 0; i < n_ev; ++i) {
choice[i] = 0;
n_alt[i] = ppmu->get_alternatives(event[i], cflags[i],
- alternatives[i]);
+ cpuhw->alternatives[i]);
for (j = 1; j < n_alt[i]; ++j)
- ppmu->get_constraint(alternatives[i][j],
- &amasks[i][j], &avalues[i][j]);
+ ppmu->get_constraint(cpuhw->alternatives[i][j],
+ &cpuhw->amasks[i][j],
+ &cpuhw->avalues[i][j]);
}
/* enumerate all possibilities and see if any will work */
@@ -313,11 +311,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
* where k > j, will satisfy the constraints.
*/
while (++j < n_alt[i]) {
- nv = (value | avalues[i][j]) +
- (value & avalues[i][j] & addf);
+ nv = (value | cpuhw->avalues[i][j]) +
+ (value & cpuhw->avalues[i][j] & addf);
if ((((nv + tadd) ^ value) & mask) == 0 &&
- (((nv + tadd) ^ avalues[i][j])
- & amasks[i][j]) == 0)
+ (((nv + tadd) ^ cpuhw->avalues[i][j])
+ & cpuhw->amasks[i][j]) == 0)
break;
}
if (j >= n_alt[i]) {
@@ -339,7 +337,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
svalues[i] = value;
smasks[i] = mask;
value = nv;
- mask |= amasks[i][j];
+ mask |= cpuhw->amasks[i][j];
++i;
j = -1;
}
@@ -347,7 +345,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
/* OK, we have a feasible combination, tell the caller the solution */
for (i = 0; i < n_ev; ++i)
- event[i] = alternatives[i][choice[i]];
+ event[i] = cpuhw->alternatives[i][choice[i]];
return 0;
}
@@ -531,8 +529,7 @@ void hw_perf_disable(void)
* Check if we ever enabled the PMU on this cpu.
*/
if (!cpuhw->pmcs_enabled) {
- if (ppc_md.enable_pmcs)
- ppc_md.enable_pmcs();
+ ppc_enable_pmcs();
cpuhw->pmcs_enabled = 1;
}
@@ -594,7 +591,7 @@ void hw_perf_enable(void)
mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
if (cpuhw->n_counters == 0)
- perf_set_pmu_inuse(0);
+ ppc_set_pmu_inuse(0);
goto out_enable;
}
@@ -627,7 +624,7 @@ void hw_perf_enable(void)
* bit set and set the hardware counters to their initial values.
* Then unfreeze the counters.
*/
- perf_set_pmu_inuse(1);
+ ppc_set_pmu_inuse(1);
mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
@@ -752,7 +749,7 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader,
return -EAGAIN;
if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n))
return -EAGAIN;
- i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0);
+ i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0);
if (i < 0)
return -EAGAIN;
cpuhw->n_counters = n0 + n;
@@ -807,7 +804,7 @@ static int power_pmu_enable(struct perf_counter *counter)
cpuhw->flags[n0] = counter->hw.counter_base;
if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1))
goto out;
- if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1))
+ if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
goto out;
counter->hw.config = cpuhw->events[n0];
@@ -1012,6 +1009,7 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
unsigned int cflags[MAX_HWCOUNTERS];
int n;
int err;
+ struct cpu_hw_counters *cpuhw;
if (!ppmu)
return ERR_PTR(-ENXIO);
@@ -1090,7 +1088,11 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
cflags[n] = flags;
if (check_excludes(ctrs, cflags, n, 1))
return ERR_PTR(-EINVAL);
- if (power_check_constraints(events, cflags, n + 1))
+
+ cpuhw = &get_cpu_var(cpu_hw_counters);
+ err = power_check_constraints(cpuhw, events, cflags, n + 1);
+ put_cpu_var(cpu_hw_counters);
+ if (err)
return ERR_PTR(-EINVAL);
counter->hw.config = events[n];
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 892a9f2e6d7..0a321643305 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -284,14 +284,13 @@ int set_dabr(unsigned long dabr)
return ppc_md.set_dabr(dabr);
/* XXX should we have a CPU_FTR_HAS_DABR ? */
-#if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
- mtspr(SPRN_DABR, dabr);
-#endif
-
#if defined(CONFIG_BOOKE)
mtspr(SPRN_DAC1, dabr);
+#elif defined(CONFIG_PPC_BOOK3S)
+ mtspr(SPRN_DABR, dabr);
#endif
+
return 0;
}
@@ -372,15 +371,16 @@ struct task_struct *__switch_to(struct task_struct *prev,
#endif /* CONFIG_SMP */
- if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
- set_dabr(new->thread.dabr);
-
#if defined(CONFIG_BOOKE)
/* If new thread DAC (HW breakpoint) is the same then leave it */
if (new->thread.dabr)
set_dabr(new->thread.dabr);
+#else
+ if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
+ set_dabr(new->thread.dabr);
#endif
+
new_thread = &new->thread;
old_thread = &current->thread;
@@ -664,6 +664,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
sp_vsid |= SLB_VSID_KERNEL | llp;
p->thread.ksp_vsid = sp_vsid;
}
+#endif /* CONFIG_PPC_STD_MMU_64 */
/*
* The PPC64 ABI makes use of a TOC to contain function
@@ -671,6 +672,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
* to the TOC entry. The first entry is a pointer to the actual
* function.
*/
+#ifdef CONFIG_PPC64
kregs->nip = *((unsigned long *)ret_from_fork);
#else
kregs->nip = (unsigned long)ret_from_fork;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index a538824616f..864334b337a 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -190,6 +190,8 @@ static int __initdata of_platform;
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
+static unsigned long __initdata prom_memory_limit;
+
static unsigned long __initdata alloc_top;
static unsigned long __initdata alloc_top_high;
static unsigned long __initdata alloc_bottom;
@@ -484,6 +486,67 @@ static int __init prom_setprop(phandle node, const char *nodename,
return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
}
+/* We can't use the standard versions because of RELOC headaches. */
+#define isxdigit(c) (('0' <= (c) && (c) <= '9') \
+ || ('a' <= (c) && (c) <= 'f') \
+ || ('A' <= (c) && (c) <= 'F'))
+
+#define isdigit(c) ('0' <= (c) && (c) <= '9')
+#define islower(c) ('a' <= (c) && (c) <= 'z')
+#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c))
+
+unsigned long prom_strtoul(const char *cp, const char **endp)
+{
+ unsigned long result = 0, base = 10, value;
+
+ if (*cp == '0') {
+ base = 8;
+ cp++;
+ if (toupper(*cp) == 'X') {
+ cp++;
+ base = 16;
+ }
+ }
+
+ while (isxdigit(*cp) &&
+ (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
+ result = result * base + value;
+ cp++;
+ }
+
+ if (endp)
+ *endp = cp;
+
+ return result;
+}
+
+unsigned long prom_memparse(const char *ptr, const char **retptr)
+{
+ unsigned long ret = prom_strtoul(ptr, retptr);
+ int shift = 0;
+
+ /*
+ * We can't use a switch here because GCC *may* generate a
+ * jump table which won't work, because we're not running at
+ * the address we're linked at.
+ */
+ if ('G' == **retptr || 'g' == **retptr)
+ shift = 30;
+
+ if ('M' == **retptr || 'm' == **retptr)
+ shift = 20;
+
+ if ('K' == **retptr || 'k' == **retptr)
+ shift = 10;
+
+ if (shift) {
+ ret <<= shift;
+ (*retptr)++;
+ }
+
+ return ret;
+}
+
/*
* Early parsing of the command line passed to the kernel, used for
* "mem=x" and the options that affect the iommu
@@ -491,9 +554,8 @@ static int __init prom_setprop(phandle node, const char *nodename,
static void __init early_cmdline_parse(void)
{
struct prom_t *_prom = &RELOC(prom);
-#ifdef CONFIG_PPC64
const char *opt;
-#endif
+
char *p;
int l = 0;
@@ -521,6 +583,15 @@ static void __init early_cmdline_parse(void)
RELOC(prom_iommu_force_on) = 1;
}
#endif
+ opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
+ if (opt) {
+ opt += 4;
+ RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
+#ifdef CONFIG_PPC64
+ /* Align to 16 MB == size of ppc64 large page */
+ RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
+#endif
+ }
}
#ifdef CONFIG_PPC_PSERIES
@@ -1027,6 +1098,29 @@ static void __init prom_init_mem(void)
}
/*
+ * If prom_memory_limit is set we reduce the upper limits *except* for
+ * alloc_top_high. This must be the real top of RAM so we can put
+ * TCE's up there.
+ */
+
+ RELOC(alloc_top_high) = RELOC(ram_top);
+
+ if (RELOC(prom_memory_limit)) {
+ if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
+ prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
+ RELOC(prom_memory_limit));
+ RELOC(prom_memory_limit) = 0;
+ } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
+ prom_printf("Ignoring mem=%x >= ram_top.\n",
+ RELOC(prom_memory_limit));
+ RELOC(prom_memory_limit) = 0;
+ } else {
+ RELOC(ram_top) = RELOC(prom_memory_limit);
+ RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
+ }
+ }
+
+ /*
* Setup our top alloc point, that is top of RMO or top of
* segment 0 when running non-LPAR.
* Some RS64 machines have buggy firmware where claims up at
@@ -1041,6 +1135,7 @@ static void __init prom_init_mem(void)
RELOC(alloc_top_high) = RELOC(ram_top);
prom_printf("memory layout at init:\n");
+ prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom));
prom_printf(" alloc_top : %x\n", RELOC(alloc_top));
prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high));
@@ -1259,10 +1354,6 @@ static void __init prom_initialize_tce_table(void)
*
* -- Cort
*/
-extern char __secondary_hold;
-extern unsigned long __secondary_hold_spinloop;
-extern unsigned long __secondary_hold_acknowledge;
-
/*
* We want to reference the copy of __secondary_hold_* in the
* 0 - 0x100 address range
@@ -2399,6 +2490,10 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
/*
* Fill in some infos for use by the kernel later on
*/
+ if (RELOC(prom_memory_limit))
+ prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
+ &RELOC(prom_memory_limit),
+ sizeof(prom_memory_limit));
#ifdef CONFIG_PPC64
if (RELOC(prom_iommu_off))
prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index c434823b8c8..bf90361bb70 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -39,6 +39,7 @@
#include <asm/smp.h>
#include <asm/atomic.h>
#include <asm/time.h>
+#include <asm/mmu.h>
struct rtas_t rtas = {
.lock = __RAW_SPIN_LOCK_UNLOCKED
@@ -713,6 +714,7 @@ static void rtas_percpu_suspend_me(void *info)
{
long rc = H_SUCCESS;
unsigned long msr_save;
+ u16 slb_size = mmu_slb_size;
int cpu;
struct rtas_suspend_me_data *data =
(struct rtas_suspend_me_data *)info;
@@ -735,13 +737,16 @@ static void rtas_percpu_suspend_me(void *info)
/* All other cpus are in H_JOIN, this cpu does
* the suspend.
*/
+ slb_set_size(SLB_MIN_SIZE);
printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n",
smp_processor_id());
data->error = rtas_call(data->token, 0, 1, NULL);
- if (data->error)
+ if (data->error) {
printk(KERN_DEBUG "ibm,suspend-me returned %d\n",
data->error);
+ slb_set_size(slb_size);
+ }
} else {
printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n",
smp_processor_id(), rc);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index e1e3059cf34..53bcf3d792d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -210,6 +210,14 @@ void nvram_write_byte(unsigned char val, int addr)
}
EXPORT_SYMBOL(nvram_write_byte);
+ssize_t nvram_get_size(void)
+{
+ if (ppc_md.nvram_size)
+ return ppc_md.nvram_size();
+ return -1;
+}
+EXPORT_SYMBOL(nvram_get_size);
+
void nvram_sync(void)
{
if (ppc_md.nvram_sync)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index aa6e4500635..797ea95aae2 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -63,6 +63,7 @@
#include <asm/udbg.h>
#include <asm/kexec.h>
#include <asm/swiotlb.h>
+#include <asm/mmu_context.h>
#include "setup.h"
@@ -143,11 +144,14 @@ early_param("smt-enabled", early_smt_enabled);
#define check_smt_enabled()
#endif /* CONFIG_SMP */
-/* Put the paca pointer into r13 and SPRG3 */
+/* Put the paca pointer into r13 and SPRG_PACA */
void __init setup_paca(int cpu)
{
local_paca = &paca[cpu];
- mtspr(SPRN_SPRG3, local_paca);
+ mtspr(SPRN_SPRG_PACA, local_paca);
+#ifdef CONFIG_PPC_BOOK3E
+ mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
+#endif
}
/*
@@ -231,9 +235,6 @@ void early_setup_secondary(void)
#endif /* CONFIG_SMP */
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
-extern unsigned long __secondary_hold_spinloop;
-extern void generic_secondary_smp_init(void);
-
void smp_release_cpus(void)
{
unsigned long *ptr;
@@ -454,6 +455,24 @@ static void __init irqstack_early_init(void)
#define irqstack_early_init()
#endif
+#ifdef CONFIG_PPC_BOOK3E
+static void __init exc_lvl_early_init(void)
+{
+ unsigned int i;
+
+ for_each_possible_cpu(i) {
+ critirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ dbgirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ mcheckirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ }
+}
+#else
+#define exc_lvl_early_init()
+#endif
+
/*
* Stack space used when we detect a bad kernel stack pointer, and
* early in SMP boots before relocation is enabled.
@@ -513,6 +532,7 @@ void __init setup_arch(char **cmdline_p)
init_mm.brk = klimit;
irqstack_early_init();
+ exc_lvl_early_init();
emergency_stack_init();
#ifdef CONFIG_PPC_STD_MMU_64
@@ -535,6 +555,10 @@ void __init setup_arch(char **cmdline_p)
#endif
paging_init();
+
+ /* Initialize the MMU context management stuff */
+ mmu_context_init();
+
ppc64_boot_msg(0x15, "Setup Done");
}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0b47de07302..d387b3937cc 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -269,7 +269,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
cpu_callin_map[boot_cpuid] = 1;
if (smp_ops)
- max_cpus = smp_ops->probe();
+ if (smp_ops->probe)
+ max_cpus = smp_ops->probe();
+ else
+ max_cpus = NR_CPUS;
else
max_cpus = 1;
@@ -412,9 +415,8 @@ int __cpuinit __cpu_up(unsigned int cpu)
* CPUs can take much longer to come up in the
* hotplug case. Wait five seconds.
*/
- for (c = 25; c && !cpu_callin_map[cpu]; c--) {
- msleep(200);
- }
+ for (c = 5000; c && !cpu_callin_map[cpu]; c--)
+ msleep(1);
#endif
if (!cpu_callin_map[cpu]) {
@@ -494,7 +496,8 @@ int __devinit start_secondary(void *unused)
preempt_disable();
cpu_callin_map[cpu] = 1;
- smp_ops->setup_cpu(cpu);
+ if (smp_ops->setup_cpu)
+ smp_ops->setup_cpu(cpu);
if (smp_ops->take_timebase)
smp_ops->take_timebase();
@@ -557,7 +560,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
old_mask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
- if (smp_ops)
+ if (smp_ops && smp_ops->setup_cpu)
smp_ops->setup_cpu(boot_cpuid);
set_cpus_allowed(current, old_mask);
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index bb1cfcfdbbb..1cc5e9e5da9 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -343,6 +343,18 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin)
return sys_lseek(fd, (int)offset, origin);
}
+long compat_sys_truncate(const char __user * path, u32 length)
+{
+ /* sign extend length */
+ return sys_truncate(path, (int)length);
+}
+
+long compat_sys_ftruncate(int fd, u32 length)
+{
+ /* sign extend length */
+ return sys_ftruncate(fd, (int)length);
+}
+
/* Note: it is necessary to treat bufsiz as an unsigned int,
* with the corresponding cast to a signed int to insure that the
* proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index f41aec85aa4..956ab33fd73 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -17,6 +17,7 @@
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/smp.h>
+#include <asm/pmc.h>
#include "cacheinfo.h"
@@ -123,6 +124,8 @@ static DEFINE_PER_CPU(char, pmcs_enabled);
void ppc_enable_pmcs(void)
{
+ ppc_set_pmu_inuse(1);
+
/* Only need to enable them once */
if (__get_cpu_var(pmcs_enabled))
return;
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index eae4511ceea..a180b4f9a4f 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -479,7 +479,8 @@ static int __init iSeries_tb_recal(void)
unsigned long tb_ticks = tb - iSeries_recal_tb;
unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12;
unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec;
- unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ;
+ unsigned long new_tb_ticks_per_jiffy =
+ DIV_ROUND_CLOSEST(new_tb_ticks_per_sec, HZ);
long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy;
char sign = '+';
/* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */
@@ -726,6 +727,18 @@ static int __init get_freq(char *name, int cells, unsigned long *val)
return found;
}
+/* should become __cpuinit when secondary_cpu_time_init also is */
+void start_cpu_decrementer(void)
+{
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+ /* Clear any pending timer interrupts */
+ mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+ /* Enable decrementer interrupt */
+ mtspr(SPRN_TCR, TCR_DIE);
+#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */
+}
+
void __init generic_calibrate_decr(void)
{
ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */
@@ -745,14 +758,6 @@ void __init generic_calibrate_decr(void)
printk(KERN_ERR "WARNING: Estimating processor frequency "
"(not found)\n");
}
-
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
- /* Clear any pending timer interrupts */
- mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
- /* Enable decrementer interrupt */
- mtspr(SPRN_TCR, TCR_DIE);
-#endif
}
int update_persistent_clock(struct timespec now)
@@ -913,6 +918,11 @@ static void __init init_decrementer_clockevent(void)
void secondary_cpu_time_init(void)
{
+ /* Start the decrementer on CPUs that have manual control
+ * such as BookE
+ */
+ start_cpu_decrementer();
+
/* FIME: Should make unrelatred change to move snapshot_timebase
* call here ! */
register_decrementer_clockevent(smp_processor_id());
@@ -1016,6 +1026,11 @@ void __init time_init(void)
write_sequnlock_irqrestore(&xtime_lock, flags);
+ /* Start the decrementer on CPUs that have manual control
+ * such as BookE
+ */
+ start_cpu_decrementer();
+
/* Register the clocksource, if we're not running on iSeries */
if (!firmware_has_feature(FW_FEATURE_ISERIES))
clocksource_init();
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index ad06d5c75b1..a0abce251d0 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -203,7 +203,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
} else {
vdso_pagelist = vdso64_pagelist;
vdso_pages = vdso64_pages;
- vdso_base = VDSO64_MBASE;
+ /*
+ * On 64bit we don't have a preferred map address. This
+ * allows get_unmapped_area to find an area near other mmaps
+ * and most likely share a SLB entry.
+ */
+ vdso_base = 0;
}
#else
vdso_pagelist = vdso32_pagelist;
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index c3d57bd01a8..b54b8168813 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -12,6 +12,7 @@ endif
targets := $(obj-vdso32) vdso32.so vdso32.so.dbg
obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
+GCOV_PROFILE := n
EXTRA_CFLAGS := -shared -fno-common -fno-builtin
EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index fa7f1b8f3e5..dd0c8e93677 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -7,6 +7,8 @@ obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o
targets := $(obj-vdso64) vdso64.so vdso64.so.dbg
obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64))
+GCOV_PROFILE := n
+
EXTRA_CFLAGS := -shared -fno-common -fno-builtin
EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
$(call ld-option, -Wl$(comma)--hash-style=sysv)
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index ea4d64644d0..67b6916f0e9 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -65,7 +65,7 @@ _GLOBAL(load_up_altivec)
1:
/* enable use of VMX after return */
#ifdef CONFIG_PPC32
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
oris r9,r9,MSR_VEC@h
#else
ld r4,PACACURRENT(r13)
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 819e59f6f7c..bc7b41edbdf 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -601,7 +601,7 @@ static void vio_dma_iommu_unmap_sg(struct device *dev,
vio_cmo_dealloc(viodev, alloc_size);
}
-struct dma_mapping_ops vio_dma_mapping_ops = {
+struct dma_map_ops vio_dma_mapping_ops = {
.alloc_coherent = vio_dma_iommu_alloc_coherent,
.free_coherent = vio_dma_iommu_free_coherent,
.map_sg = vio_dma_iommu_map_sg,
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 244e3658983..58da4070723 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -239,10 +239,6 @@ SECTIONS
}
#endif
- . = ALIGN(PAGE_SIZE);
- _edata = .;
- PROVIDE32 (edata = .);
-
/* The initial task and kernel stack */
#ifdef CONFIG_PPC32
. = ALIGN(8192);
@@ -276,6 +272,10 @@ SECTIONS
__nosave_end = .;
}
+ . = ALIGN(PAGE_SIZE);
+ _edata = .;
+ PROVIDE32 (edata = .);
+
/*
* And finally the bss
*/
diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S
index d0c6f841bbd..380a78cf484 100644
--- a/arch/powerpc/kvm/booke_interrupts.S
+++ b/arch/powerpc/kvm/booke_interrupts.S
@@ -56,8 +56,8 @@
.macro KVM_HANDLER ivor_nr
_GLOBAL(kvmppc_handler_\ivor_nr)
/* Get pointer to vcpu and record exit number. */
- mtspr SPRN_SPRG0, r4
- mfspr r4, SPRN_SPRG1
+ mtspr SPRN_SPRG_WSCRATCH0, r4
+ mfspr r4, SPRN_SPRG_RVCPU
stw r5, VCPU_GPR(r5)(r4)
stw r6, VCPU_GPR(r6)(r4)
mfctr r5
@@ -95,7 +95,7 @@ _GLOBAL(kvmppc_handler_len)
/* Registers:
- * SPRG0: guest r4
+ * SPRG_SCRATCH0: guest r4
* r4: vcpu pointer
* r5: KVM exit number
*/
@@ -181,7 +181,7 @@ _GLOBAL(kvmppc_resume_host)
stw r3, VCPU_LR(r4)
mfxer r3
stw r3, VCPU_XER(r4)
- mfspr r3, SPRN_SPRG0
+ mfspr r3, SPRN_SPRG_RSCRATCH0
stw r3, VCPU_GPR(r4)(r4)
mfspr r3, SPRN_SRR0
stw r3, VCPU_PC(r4)
@@ -374,7 +374,7 @@ lightweight_exit:
mtspr SPRN_IVPR, r8
/* Save vcpu pointer for the exception handlers. */
- mtspr SPRN_SPRG1, r4
+ mtspr SPRN_SPRG_WVCPU, r4
/* Can't switch the stack pointer until after IVPR is switched,
* because host interrupt handlers would get confused. */
@@ -384,13 +384,13 @@ lightweight_exit:
/* Host interrupt handlers may have clobbered these guest-readable
* SPRGs, so we need to reload them here with the guest's values. */
lwz r3, VCPU_SPRG4(r4)
- mtspr SPRN_SPRG4, r3
+ mtspr SPRN_SPRG4W, r3
lwz r3, VCPU_SPRG5(r4)
- mtspr SPRN_SPRG5, r3
+ mtspr SPRN_SPRG5W, r3
lwz r3, VCPU_SPRG6(r4)
- mtspr SPRN_SPRG6, r3
+ mtspr SPRN_SPRG6W, r3
lwz r3, VCPU_SPRG7(r4)
- mtspr SPRN_SPRG7, r3
+ mtspr SPRN_SPRG7W, r3
#ifdef CONFIG_KVM_EXIT_TIMING
/* save enter time */
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 29954dc2894..f5e7b9ce63d 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -105,7 +105,7 @@ unsigned long __init mmu_mapin_ram(void)
while (s >= LARGE_PAGE_SIZE_16M) {
pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+ unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_HWWRITE;
pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
pmd_val(*pmdp++) = val;
@@ -120,7 +120,7 @@ unsigned long __init mmu_mapin_ram(void)
while (s >= LARGE_PAGE_SIZE_4M) {
pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+ unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_HWWRITE;
pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
pmd_val(*pmdp) = val;
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 3e68363405b..6fb8fc8d2fe 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -13,6 +13,7 @@ obj-y := fault.o mem.o pgtable.o gup.o \
pgtable_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \
tlb_nohash_low.o
+obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(CONFIG_WORD_SIZE)e.o
obj-$(CONFIG_PPC64) += mmap_64.o
hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o \
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index bb3d65998e6..dc93e95b256 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -161,7 +161,7 @@ unsigned long __init mmu_mapin_ram(void)
unsigned long virt = PAGE_OFFSET;
phys_addr_t phys = memstart_addr;
- while (cam[tlbcam_index] && tlbcam_index < ARRAY_SIZE(cam)) {
+ while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) {
settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0);
virt += cam[tlbcam_index];
phys += cam[tlbcam_index];
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 14af8cedab7..b13d58932bf 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -40,7 +40,7 @@ mmu_hash_lock:
* The address is in r4, and r3 contains an access flag:
* _PAGE_RW (0x400) if a write.
* r9 contains the SRR1 value, from which we use the MSR_PR bit.
- * SPRG3 contains the physical address of the current task's thread.
+ * SPRG_THREAD contains the physical address of the current task's thread.
*
* Returns to the caller if the access is illegal or there is no
* mapping for the address. Otherwise it places an appropriate PTE
@@ -68,7 +68,7 @@ _GLOBAL(hash_page)
/* Get PTE (linux-style) and check access */
lis r0,KERNELBASE@h /* check if kernel address */
cmplw 0,r4,r0
- mfspr r8,SPRN_SPRG3 /* current task's THREAD (phys) */
+ mfspr r8,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
ori r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
lwz r5,PGDIR(r8) /* virt page-table root */
blt+ 112f /* assume user more likely */
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index c46ef2ffa3d..90df6ffe3a4 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -57,8 +57,10 @@ unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
#define HUGEPTE_CACHE_NAME(psize) (huge_pgtable_cache_name[psize])
static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
- "unused_4K", "hugepte_cache_64K", "unused_64K_AP",
- "hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G"
+ [MMU_PAGE_64K] = "hugepte_cache_64K",
+ [MMU_PAGE_1M] = "hugepte_cache_1M",
+ [MMU_PAGE_16M] = "hugepte_cache_16M",
+ [MMU_PAGE_16G] = "hugepte_cache_16G",
};
/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad()
@@ -700,6 +702,8 @@ static void __init set_huge_psize(int psize)
if (mmu_huge_psizes[psize] ||
mmu_psize_defs[psize].shift == PAGE_SHIFT)
return;
+ if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL))
+ return;
hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
switch (mmu_psize_defs[psize].shift) {
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 3de6a0d9382..3ef5084b90c 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -54,8 +54,6 @@
#endif
#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
phys_addr_t total_memory;
phys_addr_t total_lowmem;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 68a821add28..31582329cd6 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -205,6 +205,47 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size)
return 0;
}
+/* On hash-based CPUs, the vmemmap is bolted in the hash table.
+ *
+ * On Book3E CPUs, the vmemmap is currently mapped in the top half of
+ * the vmalloc space using normal page tables, though the size of
+ * pages encoded in the PTEs can be different
+ */
+
+#ifdef CONFIG_PPC_BOOK3E
+static void __meminit vmemmap_create_mapping(unsigned long start,
+ unsigned long page_size,
+ unsigned long phys)
+{
+ /* Create a PTE encoding without page size */
+ unsigned long i, flags = _PAGE_PRESENT | _PAGE_ACCESSED |
+ _PAGE_KERNEL_RW;
+
+ /* PTEs only contain page size encodings up to 32M */
+ BUG_ON(mmu_psize_defs[mmu_vmemmap_psize].enc > 0xf);
+
+ /* Encode the size in the PTE */
+ flags |= mmu_psize_defs[mmu_vmemmap_psize].enc << 8;
+
+ /* For each PTE for that area, map things. Note that we don't
+ * increment phys because all PTEs are of the large size and
+ * thus must have the low bits clear
+ */
+ for (i = 0; i < page_size; i += PAGE_SIZE)
+ BUG_ON(map_kernel_page(start + i, phys, flags));
+}
+#else /* CONFIG_PPC_BOOK3E */
+static void __meminit vmemmap_create_mapping(unsigned long start,
+ unsigned long page_size,
+ unsigned long phys)
+{
+ int mapped = htab_bolt_mapping(start, start + page_size, phys,
+ PAGE_KERNEL, mmu_vmemmap_psize,
+ mmu_kernel_ssize);
+ BUG_ON(mapped < 0);
+}
+#endif /* CONFIG_PPC_BOOK3E */
+
int __meminit vmemmap_populate(struct page *start_page,
unsigned long nr_pages, int node)
{
@@ -215,8 +256,11 @@ int __meminit vmemmap_populate(struct page *start_page,
/* Align to the page size of the linear mapping. */
start = _ALIGN_DOWN(start, page_size);
+ pr_debug("vmemmap_populate page %p, %ld pages, node %d\n",
+ start_page, nr_pages, node);
+ pr_debug(" -> map %lx..%lx\n", start, end);
+
for (; start < end; start += page_size) {
- int mapped;
void *p;
if (vmemmap_populated(start, page_size))
@@ -226,13 +270,10 @@ int __meminit vmemmap_populate(struct page *start_page,
if (!p)
return -ENOMEM;
- pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
- start, p, __pa(p));
+ pr_debug(" * %016lx..%016lx allocated at %p\n",
+ start, start + page_size, p);
- mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
- pgprot_val(PAGE_KERNEL),
- mmu_vmemmap_psize, mmu_kernel_ssize);
- BUG_ON(mapped < 0);
+ vmemmap_create_mapping(start, page_size, __pa(p));
}
return 0;
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index b1a727def15..c2f93dc470e 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -25,10 +25,20 @@
* also clear mm->cpu_vm_mask bits when processes are migrated
*/
-#undef DEBUG
-#define DEBUG_STEAL_ONLY
-#undef DEBUG_MAP_CONSISTENCY
-/*#define DEBUG_CLAMP_LAST_CONTEXT 15 */
+#define DEBUG_MAP_CONSISTENCY
+#define DEBUG_CLAMP_LAST_CONTEXT 31
+//#define DEBUG_HARDER
+
+/* We don't use DEBUG because it tends to be compiled in always nowadays
+ * and this would generate way too much output
+ */
+#ifdef DEBUG_HARDER
+#define pr_hard(args...) printk(KERN_DEBUG args)
+#define pr_hardcont(args...) printk(KERN_CONT args)
+#else
+#define pr_hard(args...) do { } while(0)
+#define pr_hardcont(args...) do { } while(0)
+#endif
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -71,7 +81,7 @@ static DEFINE_SPINLOCK(context_lock);
static unsigned int steal_context_smp(unsigned int id)
{
struct mm_struct *mm;
- unsigned int cpu, max;
+ unsigned int cpu, max, i;
max = last_context - first_context;
@@ -89,15 +99,22 @@ static unsigned int steal_context_smp(unsigned int id)
id = first_context;
continue;
}
- pr_devel("[%d] steal context %d from mm @%p\n",
- smp_processor_id(), id, mm);
+ pr_hardcont(" | steal %d from 0x%p", id, mm);
/* Mark this mm has having no context anymore */
mm->context.id = MMU_NO_CONTEXT;
- /* Mark it stale on all CPUs that used this mm */
- for_each_cpu(cpu, mm_cpumask(mm))
- __set_bit(id, stale_map[cpu]);
+ /* Mark it stale on all CPUs that used this mm. For threaded
+ * implementations, we set it on all threads on each core
+ * represented in the mask. A future implementation will use
+ * a core map instead but this will do for now.
+ */
+ for_each_cpu(cpu, mm_cpumask(mm)) {
+ for (i = cpu_first_thread_in_core(cpu);
+ i <= cpu_last_thread_in_core(cpu); i++)
+ __set_bit(id, stale_map[i]);
+ cpu = i - 1;
+ }
return id;
}
@@ -126,7 +143,7 @@ static unsigned int steal_context_up(unsigned int id)
/* Pick up the victim mm */
mm = context_mm[id];
- pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+ pr_hardcont(" | steal %d from 0x%p", id, mm);
/* Flush the TLB for that context */
local_flush_tlb_mm(mm);
@@ -173,25 +190,20 @@ static void context_check_map(void) { }
void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
{
- unsigned int id, cpu = smp_processor_id();
+ unsigned int i, id, cpu = smp_processor_id();
unsigned long *map;
/* No lockless fast path .. yet */
spin_lock(&context_lock);
-#ifndef DEBUG_STEAL_ONLY
- pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
- cpu, next, next->context.active, next->context.id);
-#endif
+ pr_hard("[%d] activating context for mm @%p, active=%d, id=%d",
+ cpu, next, next->context.active, next->context.id);
#ifdef CONFIG_SMP
/* Mark us active and the previous one not anymore */
next->context.active++;
if (prev) {
-#ifndef DEBUG_STEAL_ONLY
- pr_devel(" old context %p active was: %d\n",
- prev, prev->context.active);
-#endif
+ pr_hardcont(" (old=0x%p a=%d)", prev, prev->context.active);
WARN_ON(prev->context.active < 1);
prev->context.active--;
}
@@ -201,8 +213,14 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
/* If we already have a valid assigned context, skip all that */
id = next->context.id;
- if (likely(id != MMU_NO_CONTEXT))
+ if (likely(id != MMU_NO_CONTEXT)) {
+#ifdef DEBUG_MAP_CONSISTENCY
+ if (context_mm[id] != next)
+ pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n",
+ next, id, id, context_mm[id]);
+#endif
goto ctxt_ok;
+ }
/* We really don't have a context, let's try to acquire one */
id = next_context;
@@ -235,11 +253,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
next_context = id + 1;
context_mm[id] = next;
next->context.id = id;
-
-#ifndef DEBUG_STEAL_ONLY
- pr_devel("[%d] picked up new id %d, nrf is now %d\n",
- cpu, id, nr_free_contexts);
-#endif
+ pr_hardcont(" | new id=%d,nrf=%d", id, nr_free_contexts);
context_check_map();
ctxt_ok:
@@ -248,15 +262,21 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
* local TLB for it and unmark it before we use it
*/
if (test_bit(id, stale_map[cpu])) {
- pr_devel("[%d] flushing stale context %d for mm @%p !\n",
- cpu, id, next);
+ pr_hardcont(" | stale flush %d [%d..%d]",
+ id, cpu_first_thread_in_core(cpu),
+ cpu_last_thread_in_core(cpu));
+
local_flush_tlb_mm(next);
/* XXX This clear should ultimately be part of local_flush_tlb_mm */
- __clear_bit(id, stale_map[cpu]);
+ for (i = cpu_first_thread_in_core(cpu);
+ i <= cpu_last_thread_in_core(cpu); i++) {
+ __clear_bit(id, stale_map[i]);
+ }
}
/* Flick the MMU and release lock */
+ pr_hardcont(" -> %d\n", id);
set_context(id, next->pgd);
spin_unlock(&context_lock);
}
@@ -266,6 +286,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
*/
int init_new_context(struct task_struct *t, struct mm_struct *mm)
{
+ pr_hard("initing context for mm @%p\n", mm);
+
mm->context.id = MMU_NO_CONTEXT;
mm->context.active = 0;
@@ -305,7 +327,9 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned int)(long)hcpu;
-
+#ifdef CONFIG_HOTPLUG_CPU
+ struct task_struct *p;
+#endif
/* We don't touch CPU 0 map, it's allocated at aboot and kept
* around forever
*/
@@ -324,8 +348,16 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
kfree(stale_map[cpu]);
stale_map[cpu] = NULL;
- break;
-#endif
+
+ /* We also clear the cpu_vm_mask bits of CPUs going away */
+ read_lock(&tasklist_lock);
+ for_each_process(p) {
+ if (p->mm)
+ cpu_mask_clear_cpu(cpu, mm_cpumask(p->mm));
+ }
+ read_unlock(&tasklist_lock);
+ break;
+#endif /* CONFIG_HOTPLUG_CPU */
}
return NOTIFY_OK;
}
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index d1f9c62dc17..d2e5321d5ea 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -36,21 +36,37 @@ static inline void _tlbil_pid(unsigned int pid)
{
asm volatile ("sync; tlbia; isync" : : : "memory");
}
+#define _tlbil_pid_noind(pid) _tlbil_pid(pid)
+
#else /* CONFIG_40x || CONFIG_8xx */
extern void _tlbil_all(void);
extern void _tlbil_pid(unsigned int pid);
+#ifdef CONFIG_PPC_BOOK3E
+extern void _tlbil_pid_noind(unsigned int pid);
+#else
+#define _tlbil_pid_noind(pid) _tlbil_pid(pid)
+#endif
#endif /* !(CONFIG_40x || CONFIG_8xx) */
/*
* On 8xx, we directly inline tlbie, on others, it's extern
*/
#ifdef CONFIG_8xx
-static inline void _tlbil_va(unsigned long address, unsigned int pid)
+static inline void _tlbil_va(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind)
{
asm volatile ("tlbie %0; sync" : : "r" (address) : "memory");
}
-#else /* CONFIG_8xx */
-extern void _tlbil_va(unsigned long address, unsigned int pid);
+#elif defined(CONFIG_PPC_BOOK3E)
+extern void _tlbil_va(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind);
+#else
+extern void __tlbil_va(unsigned long address, unsigned int pid);
+static inline void _tlbil_va(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind)
+{
+ __tlbil_va(address, pid);
+}
#endif /* CONIFG_8xx */
/*
@@ -58,10 +74,16 @@ extern void _tlbil_va(unsigned long address, unsigned int pid);
* implementation. When that becomes the case, this will be
* an extern.
*/
-static inline void _tlbivax_bcast(unsigned long address, unsigned int pid)
+#ifdef CONFIG_PPC_BOOK3E
+extern void _tlbivax_bcast(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind);
+#else
+static inline void _tlbivax_bcast(unsigned long address, unsigned int pid,
+ unsigned int tsize, unsigned int ind)
{
BUG();
}
+#endif
#else /* CONFIG_PPC_MMU_NOHASH */
@@ -99,7 +121,12 @@ extern unsigned int rtas_data, rtas_size;
struct hash_pte;
extern struct hash_pte *Hash, *Hash_end;
extern unsigned long Hash_size, Hash_mask;
-#endif
+
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+extern int map_kernel_page(unsigned long ea, unsigned long pa, int flags);
+#endif /* CONFIG_PPC64 */
extern unsigned long ioremap_bot;
extern unsigned long __max_low_memory;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 627767d6169..83f1551ec2c 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,16 @@
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+#ifdef CONFIG_SMP
+
+/*
+ * Handle batching of page table freeing on SMP. Page tables are
+ * queued up and send to be freed later by RCU in order to avoid
+ * freeing a page table page that is being walked without locks
+ */
+
static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
static unsigned long pte_freelist_forced_free;
@@ -116,27 +126,7 @@ void pte_free_finish(void)
*batchp = NULL;
}
-/*
- * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags()
- */
-static pte_t do_dcache_icache_coherency(pte_t pte)
-{
- unsigned long pfn = pte_pfn(pte);
- struct page *page;
-
- if (unlikely(!pfn_valid(pfn)))
- return pte;
- page = pfn_to_page(pfn);
-
- if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
- pr_devel("do_dcache_icache_coherency... flushing\n");
- flush_dcache_icache_page(page);
- set_bit(PG_arch_1, &page->flags);
- }
- else
- pr_devel("do_dcache_icache_coherency... already clean\n");
- return __pte(pte_val(pte) | _PAGE_HWEXEC);
-}
+#endif /* CONFIG_SMP */
static inline int is_exec_fault(void)
{
@@ -145,49 +135,139 @@ static inline int is_exec_fault(void)
/* We only try to do i/d cache coherency on stuff that looks like
* reasonably "normal" PTEs. We currently require a PTE to be present
- * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE
+ * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE. We also only do that
+ * on userspace PTEs
*/
static inline int pte_looks_normal(pte_t pte)
{
return (pte_val(pte) &
- (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE)) ==
- (_PAGE_PRESENT);
+ (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE | _PAGE_USER)) ==
+ (_PAGE_PRESENT | _PAGE_USER);
}
-#if defined(CONFIG_PPC_STD_MMU)
+struct page * maybe_pte_to_page(pte_t pte)
+{
+ unsigned long pfn = pte_pfn(pte);
+ struct page *page;
+
+ if (unlikely(!pfn_valid(pfn)))
+ return NULL;
+ page = pfn_to_page(pfn);
+ if (PageReserved(page))
+ return NULL;
+ return page;
+}
+
+#if defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0
+
/* Server-style MMU handles coherency when hashing if HW exec permission
- * is supposed per page (currently 64-bit only). Else, we always flush
- * valid PTEs in set_pte.
+ * is supposed per page (currently 64-bit only). If not, then, we always
+ * flush the cache for valid PTEs in set_pte. Embedded CPU without HW exec
+ * support falls into the same category.
*/
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+
+static pte_t set_pte_filter(pte_t pte)
{
- return set_pte && pte_looks_normal(pte) &&
- !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
- cpu_has_feature(CPU_FTR_NOEXECUTE));
+ pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
+ if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
+ cpu_has_feature(CPU_FTR_NOEXECUTE))) {
+ struct page *pg = maybe_pte_to_page(pte);
+ if (!pg)
+ return pte;
+ if (!test_bit(PG_arch_1, &pg->flags)) {
+ flush_dcache_icache_page(pg);
+ set_bit(PG_arch_1, &pg->flags);
+ }
+ }
+ return pte;
}
-#elif _PAGE_HWEXEC == 0
-/* Embedded type MMU without HW exec support (8xx only so far), we flush
- * the cache for any present PTE
- */
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+
+static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
+ int dirty)
{
- return set_pte && pte_looks_normal(pte);
+ return pte;
}
-#else
-/* Other embedded CPUs with HW exec support per-page, we flush on exec
- * fault if HWEXEC is not set
+
+#else /* defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0 */
+
+/* Embedded type MMU with HW exec support. This is a bit more complicated
+ * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
+ * instead we "filter out" the exec permission for non clean pages.
*/
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+static pte_t set_pte_filter(pte_t pte)
{
- return pte_looks_normal(pte) && is_exec_fault() &&
- !(pte_val(pte) & _PAGE_HWEXEC);
+ struct page *pg;
+
+ /* No exec permission in the first place, move on */
+ if (!(pte_val(pte) & _PAGE_EXEC) || !pte_looks_normal(pte))
+ return pte;
+
+ /* If you set _PAGE_EXEC on weird pages you're on your own */
+ pg = maybe_pte_to_page(pte);
+ if (unlikely(!pg))
+ return pte;
+
+ /* If the page clean, we move on */
+ if (test_bit(PG_arch_1, &pg->flags))
+ return pte;
+
+ /* If it's an exec fault, we flush the cache and make it clean */
+ if (is_exec_fault()) {
+ flush_dcache_icache_page(pg);
+ set_bit(PG_arch_1, &pg->flags);
+ return pte;
+ }
+
+ /* Else, we filter out _PAGE_EXEC */
+ return __pte(pte_val(pte) & ~_PAGE_EXEC);
}
-#endif
+
+static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
+ int dirty)
+{
+ struct page *pg;
+
+ /* So here, we only care about exec faults, as we use them
+ * to recover lost _PAGE_EXEC and perform I$/D$ coherency
+ * if necessary. Also if _PAGE_EXEC is already set, same deal,
+ * we just bail out
+ */
+ if (dirty || (pte_val(pte) & _PAGE_EXEC) || !is_exec_fault())
+ return pte;
+
+#ifdef CONFIG_DEBUG_VM
+ /* So this is an exec fault, _PAGE_EXEC is not set. If it was
+ * an error we would have bailed out earlier in do_page_fault()
+ * but let's make sure of it
+ */
+ if (WARN_ON(!(vma->vm_flags & VM_EXEC)))
+ return pte;
+#endif /* CONFIG_DEBUG_VM */
+
+ /* If you set _PAGE_EXEC on weird pages you're on your own */
+ pg = maybe_pte_to_page(pte);
+ if (unlikely(!pg))
+ goto bail;
+
+ /* If the page is already clean, we move on */
+ if (test_bit(PG_arch_1, &pg->flags))
+ goto bail;
+
+ /* Clean the page and set PG_arch_1 */
+ flush_dcache_icache_page(pg);
+ set_bit(PG_arch_1, &pg->flags);
+
+ bail:
+ return __pte(pte_val(pte) | _PAGE_EXEC);
+}
+
+#endif /* !(defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0) */
/*
* set_pte stores a linux PTE into the linux page table.
*/
-void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+ pte_t pte)
{
#ifdef CONFIG_DEBUG_VM
WARN_ON(pte_present(*ptep));
@@ -196,9 +276,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte
* this context might not have been activated yet when this
* is called.
*/
- pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
- if (pte_need_exec_flush(pte, 1))
- pte = do_dcache_icache_coherency(pte);
+ pte = set_pte_filter(pte);
/* Perform the setting of the PTE */
__set_pte_at(mm, addr, ptep, pte, 0);
@@ -215,8 +293,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
pte_t *ptep, pte_t entry, int dirty)
{
int changed;
- if (!dirty && pte_need_exec_flush(entry, 0))
- entry = do_dcache_icache_coherency(entry);
+ entry = set_access_flags_filter(entry, vma, dirty);
changed = !pte_same(*(ptep), entry);
if (changed) {
if (!(vma->vm_flags & VM_HUGETLB))
@@ -242,7 +319,7 @@ void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
BUG_ON(pud_none(*pud));
pmd = pmd_offset(pud, addr);
BUG_ON(!pmd_present(*pmd));
- BUG_ON(!spin_is_locked(pte_lockptr(mm, pmd)));
+ assert_spin_locked(pte_lockptr(mm, pmd));
}
#endif /* CONFIG_DEBUG_VM */
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 5422169626b..cb96cb2e17c 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -142,7 +142,7 @@ ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
- flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
+ flags &= ~(_PAGE_USER | _PAGE_EXEC);
return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
}
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index bfa7db6b2fd..853d5565eed 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -33,6 +33,8 @@
#include <linux/stddef.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
@@ -55,19 +57,36 @@
unsigned long ioremap_bot = IOREMAP_BASE;
+
+#ifdef CONFIG_PPC_MMU_NOHASH
+static void *early_alloc_pgtable(unsigned long size)
+{
+ void *pt;
+
+ if (init_bootmem_done)
+ pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
+ else
+ pt = __va(lmb_alloc_base(size, size,
+ __pa(MAX_DMA_ADDRESS)));
+ memset(pt, 0, size);
+
+ return pt;
+}
+#endif /* CONFIG_PPC_MMU_NOHASH */
+
/*
- * map_io_page currently only called by __ioremap
- * map_io_page adds an entry to the ioremap page table
+ * map_kernel_page currently only called by __ioremap
+ * map_kernel_page adds an entry to the ioremap page table
* and adds an entry to the HPT, possibly bolting it
*/
-static int map_io_page(unsigned long ea, unsigned long pa, int flags)
+int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
{
pgd_t *pgdp;
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
- if (mem_init_done) {
+ if (slab_is_available()) {
pgdp = pgd_offset_k(ea);
pudp = pud_alloc(&init_mm, pgdp, ea);
if (!pudp)
@@ -81,6 +100,35 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
__pgprot(flags)));
} else {
+#ifdef CONFIG_PPC_MMU_NOHASH
+ /* Warning ! This will blow up if bootmem is not initialized
+ * which our ppc64 code is keen to do that, we'll need to
+ * fix it and/or be more careful
+ */
+ pgdp = pgd_offset_k(ea);
+#ifdef PUD_TABLE_SIZE
+ if (pgd_none(*pgdp)) {
+ pudp = early_alloc_pgtable(PUD_TABLE_SIZE);
+ BUG_ON(pudp == NULL);
+ pgd_populate(&init_mm, pgdp, pudp);
+ }
+#endif /* PUD_TABLE_SIZE */
+ pudp = pud_offset(pgdp, ea);
+ if (pud_none(*pudp)) {
+ pmdp = early_alloc_pgtable(PMD_TABLE_SIZE);
+ BUG_ON(pmdp == NULL);
+ pud_populate(&init_mm, pudp, pmdp);
+ }
+ pmdp = pmd_offset(pudp, ea);
+ if (!pmd_present(*pmdp)) {
+ ptep = early_alloc_pgtable(PAGE_SIZE);
+ BUG_ON(ptep == NULL);
+ pmd_populate_kernel(&init_mm, pmdp, ptep);
+ }
+ ptep = pte_offset_kernel(pmdp, ea);
+ set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
+ __pgprot(flags)));
+#else /* CONFIG_PPC_MMU_NOHASH */
/*
* If the mm subsystem is not fully up, we cannot create a
* linux page table entry for this mapping. Simply bolt an
@@ -93,6 +141,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
"memory at %016lx !\n", pa);
return -ENOMEM;
}
+#endif /* !CONFIG_PPC_MMU_NOHASH */
}
return 0;
}
@@ -124,7 +173,7 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size,
WARN_ON(size & ~PAGE_MASK);
for (i = 0; i < size; i += PAGE_SIZE)
- if (map_io_page((unsigned long)ea+i, pa+i, flags))
+ if (map_kernel_page((unsigned long)ea+i, pa+i, flags))
return NULL;
return (void __iomem *)ea;
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index a685652effe..1d98ecc8eec 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -191,7 +191,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
unsigned long slbie_data = 0;
unsigned long pc = KSTK_EIP(tsk);
unsigned long stack = KSTK_ESP(tsk);
- unsigned long unmapped_base;
+ unsigned long exec_base;
/*
* We need interrupts hard-disabled here, not just soft-disabled,
@@ -227,42 +227,44 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
/*
* preload some userspace segments into the SLB.
+ * Almost all 32 and 64bit PowerPC executables are linked at
+ * 0x10000000 so it makes sense to preload this segment.
*/
- if (test_tsk_thread_flag(tsk, TIF_32BIT))
- unmapped_base = TASK_UNMAPPED_BASE_USER32;
- else
- unmapped_base = TASK_UNMAPPED_BASE_USER64;
+ exec_base = 0x10000000;
- if (is_kernel_addr(pc))
- return;
- slb_allocate(pc);
-
- if (esids_match(pc,stack))
+ if (is_kernel_addr(pc) || is_kernel_addr(stack) ||
+ is_kernel_addr(exec_base))
return;
- if (is_kernel_addr(stack))
- return;
- slb_allocate(stack);
+ slb_allocate(pc);
- if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base))
- return;
+ if (!esids_match(pc, stack))
+ slb_allocate(stack);
- if (is_kernel_addr(unmapped_base))
- return;
- slb_allocate(unmapped_base);
+ if (!esids_match(pc, exec_base) &&
+ !esids_match(stack, exec_base))
+ slb_allocate(exec_base);
}
static inline void patch_slb_encoding(unsigned int *insn_addr,
unsigned int immed)
{
- /* Assume the instruction had a "0" immediate value, just
- * "or" in the new value
- */
- *insn_addr |= immed;
+ *insn_addr = (*insn_addr & 0xffff0000) | immed;
flush_icache_range((unsigned long)insn_addr, 4+
(unsigned long)insn_addr);
}
+void slb_set_size(u16 size)
+{
+ extern unsigned int *slb_compare_rr_to_size;
+
+ if (mmu_slb_size == size)
+ return;
+
+ mmu_slb_size = size;
+ patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size);
+}
+
void slb_initialize(void)
{
unsigned long linear_llp, vmalloc_llp, io_llp;
diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c
index 65190587a36..8aaa8b7eb32 100644
--- a/arch/powerpc/mm/tlb_hash32.c
+++ b/arch/powerpc/mm/tlb_hash32.c
@@ -71,6 +71,9 @@ void tlb_flush(struct mmu_gather *tlb)
*/
_tlbia();
}
+
+ /* Push out batch of freed page tables */
+ pte_free_finish();
}
/*
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 937eb90677d..2b2f35f6985 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -33,11 +33,6 @@
DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
-/* This is declared as we are using the more or less generic
- * arch/powerpc/include/asm/tlb.h file -- tgall
- */
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
/*
* A linux PTE was changed and the corresponding hash table entry
* neesd to be flushed. This function will either perform the flush
@@ -154,6 +149,21 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch)
batch->index = 0;
}
+void tlb_flush(struct mmu_gather *tlb)
+{
+ struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
+
+ /* If there's a TLB batch pending, then we must flush it because the
+ * pages are going to be freed and we really don't want to have a CPU
+ * access a freed page because it has a stale TLB
+ */
+ if (tlbbatch->index)
+ __flush_tlb_pending(tlbbatch);
+
+ /* Push out batch of freed page tables */
+ pte_free_finish();
+}
+
/**
* __flush_hash_table_range - Flush all HPTEs for a given address range
* from the hash table (and the TLB). But keeps
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
new file mode 100644
index 00000000000..ef1cccf7117
--- /dev/null
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -0,0 +1,770 @@
+/*
+ * Low leve TLB miss handlers for Book3E
+ *
+ * Copyright (C) 2008-2009
+ * Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/processor.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/pgtable.h>
+#include <asm/reg.h>
+#include <asm/exception-64e.h>
+#include <asm/ppc-opcode.h>
+
+#ifdef CONFIG_PPC_64K_PAGES
+#define VPTE_PMD_SHIFT (PTE_INDEX_SIZE+1)
+#else
+#define VPTE_PMD_SHIFT (PTE_INDEX_SIZE)
+#endif
+#define VPTE_PUD_SHIFT (VPTE_PMD_SHIFT + PMD_INDEX_SIZE)
+#define VPTE_PGD_SHIFT (VPTE_PUD_SHIFT + PUD_INDEX_SIZE)
+#define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE)
+
+
+/**********************************************************************
+ * *
+ * TLB miss handling for Book3E with TLB reservation and HES support *
+ * *
+ **********************************************************************/
+
+
+/* Data TLB miss */
+ START_EXCEPTION(data_tlb_miss)
+ TLB_MISS_PROLOG
+
+ /* Now we handle the fault proper. We only save DEAR in normal
+ * fault case since that's the only interesting values here.
+ * We could probably also optimize by not saving SRR0/1 in the
+ * linear mapping case but I'll leave that for later
+ */
+ mfspr r14,SPRN_ESR
+ mfspr r16,SPRN_DEAR /* get faulting address */
+ srdi r15,r16,60 /* get region */
+ cmpldi cr0,r15,0xc /* linear mapping ? */
+ TLB_MISS_STATS_SAVE_INFO
+ beq tlb_load_linear /* yes -> go to linear map load */
+
+ /* The page tables are mapped virtually linear. At this point, though,
+ * we don't know whether we are trying to fault in a first level
+ * virtual address or a virtual page table address. We can get that
+ * from bit 0x1 of the region ID which we have set for a page table
+ */
+ andi. r10,r15,0x1
+ bne- virt_page_table_tlb_miss
+
+ std r14,EX_TLB_ESR(r12); /* save ESR */
+ std r16,EX_TLB_DEAR(r12); /* save DEAR */
+
+ /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */
+ li r11,_PAGE_PRESENT
+ oris r11,r11,_PAGE_ACCESSED@h
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ cmpldi cr0,r15,0 /* Check for user region */
+
+ /* We pre-test some combination of permissions to avoid double
+ * faults:
+ *
+ * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE
+ * ESR_ST is 0x00800000
+ * _PAGE_BAP_SW is 0x00000010
+ * So the shift is >> 19. This tests for supervisor writeability.
+ * If the page happens to be supervisor writeable and not user
+ * writeable, we will take a new fault later, but that should be
+ * a rare enough case.
+ *
+ * We also move ESR_ST in _PAGE_DIRTY position
+ * _PAGE_DIRTY is 0x00001000 so the shift is >> 11
+ *
+ * MAS1 is preset for all we need except for TID that needs to
+ * be cleared for kernel translations
+ */
+ rlwimi r11,r14,32-19,27,27
+ rlwimi r11,r14,32-16,19,19
+ beq normal_tlb_miss
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ cmpldi cr0,r15,8 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ beq+ normal_tlb_miss
+
+ /* We got a crappy address, just fault with whatever DEAR and ESR
+ * are here
+ */
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+
+/* Instruction TLB miss */
+ START_EXCEPTION(instruction_tlb_miss)
+ TLB_MISS_PROLOG
+
+ /* If we take a recursive fault, the second level handler may need
+ * to know whether we are handling a data or instruction fault in
+ * order to get to the right store fault handler. We provide that
+ * info by writing a crazy value in ESR in our exception frame
+ */
+ li r14,-1 /* store to exception frame is done later */
+
+ /* Now we handle the fault proper. We only save DEAR in the non
+ * linear mapping case since we know the linear mapping case will
+ * not re-enter. We could indeed optimize and also not save SRR0/1
+ * in the linear mapping case but I'll leave that for later
+ *
+ * Faulting address is SRR0 which is already in r16
+ */
+ srdi r15,r16,60 /* get region */
+ cmpldi cr0,r15,0xc /* linear mapping ? */
+ TLB_MISS_STATS_SAVE_INFO
+ beq tlb_load_linear /* yes -> go to linear map load */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ li r11,_PAGE_PRESENT|_PAGE_EXEC /* Base perm */
+ oris r11,r11,_PAGE_ACCESSED@h
+
+ cmpldi cr0,r15,0 /* Check for user region */
+ std r14,EX_TLB_ESR(r12) /* write crazy -1 to frame */
+ beq normal_tlb_miss
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ cmpldi cr0,r15,8 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ beq+ normal_tlb_miss
+
+ /* We got a crappy address, just fault */
+ TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+/*
+ * This is the guts of the first-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = faulting address
+ * r15 = region ID
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = PTE permission mask
+ * r10 = crap (free to use)
+ */
+normal_tlb_miss:
+ /* So we first construct the page table address. We do that by
+ * shifting the bottom of the address (not the region ID) by
+ * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and
+ * or'ing the fourth high bit.
+ *
+ * NOTE: For 64K pages, we do things slightly differently in
+ * order to handle the weird page table format used by linux
+ */
+ ori r10,r15,0x1
+#ifdef CONFIG_PPC_64K_PAGES
+ /* For the top bits, 16 bytes per PTE */
+ rldicl r14,r16,64-(PAGE_SHIFT-4),PAGE_SHIFT-4+4
+ /* Now create the bottom bits as 0 in position 0x8000 and
+ * the rest calculated for 8 bytes per PTE
+ */
+ rldicl r15,r16,64-(PAGE_SHIFT-3),64-15
+ /* Insert the bottom bits in */
+ rlwimi r14,r15,0,16,31
+#else
+ rldicl r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4
+#endif
+ sldi r15,r10,60
+ clrrdi r14,r14,3
+ or r10,r15,r14
+
+BEGIN_MMU_FTR_SECTION
+ /* Set the TLB reservation and seach for existing entry. Then load
+ * the entry.
+ */
+ PPC_TLBSRX_DOT(0,r16)
+ ld r14,0(r10)
+ beq normal_tlb_miss_done
+MMU_FTR_SECTION_ELSE
+ ld r14,0(r10)
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
+
+finish_normal_tlb_miss:
+ /* Check if required permissions are met */
+ andc. r15,r11,r14
+ bne- normal_tlb_miss_access_fault
+
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE need change if !base page size, not
+ * yet implemented for now
+ * MAS 2 : Defaults not useful, need to be redone
+ * MAS 3+7 : Needs to be done
+ *
+ * TODO: mix up code below for better scheduling
+ */
+ clrrdi r11,r16,12 /* Clear low crap in EA */
+ rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */
+ mtspr SPRN_MAS2,r11
+
+ /* Check page size, if not standard, update MAS1 */
+ rldicl r11,r14,64-8,64-8
+#ifdef CONFIG_PPC_64K_PAGES
+ cmpldi cr0,r11,BOOK3E_PAGESZ_64K
+#else
+ cmpldi cr0,r11,BOOK3E_PAGESZ_4K
+#endif
+ beq- 1f
+ mfspr r11,SPRN_MAS1
+ rlwimi r11,r14,31,21,24
+ rlwinm r11,r11,0,21,19
+ mtspr SPRN_MAS1,r11
+1:
+ /* Move RPN in position */
+ rldicr r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
+ clrldi r15,r11,12 /* Clear crap at the top */
+ rlwimi r15,r14,32-8,22,25 /* Move in U bits */
+ rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */
+
+ /* Mask out SW and UW if !DIRTY (XXX optimize this !) */
+ andi. r11,r14,_PAGE_DIRTY
+ bne 1f
+ li r11,MAS3_SW|MAS3_UW
+ andc r15,r15,r11
+1:
+BEGIN_MMU_FTR_SECTION
+ srdi r16,r15,32
+ mtspr SPRN_MAS3,r15
+ mtspr SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+ mtspr SPRN_MAS7_MAS3,r15
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
+
+ tlbwe
+
+normal_tlb_miss_done:
+ /* We don't bother with restoring DEAR or ESR since we know we are
+ * level 0 and just going back to userland. They are only needed
+ * if you are going to take an access fault
+ */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
+ TLB_MISS_EPILOG_SUCCESS
+ rfi
+
+normal_tlb_miss_access_fault:
+ /* We need to check if it was an instruction miss */
+ andi. r10,r11,_PAGE_EXEC
+ bne 1f
+ ld r14,EX_TLB_DEAR(r12)
+ ld r15,EX_TLB_ESR(r12)
+ mtspr SPRN_DEAR,r14
+ mtspr SPRN_ESR,r15
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = region (top 4 bits of address)
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * Note that this should only ever be called as a second level handler
+ * with the current scheme when using SW load.
+ * That means we can always get the original fault DEAR at
+ * EX_TLB_DEAR-EX_TLB_SIZE(r12)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will restart the whole fault at level
+ * 0 so we don't care too much about clobbers
+ *
+ * XXX That code was written back when we couldn't clobber r14. We can now,
+ * so we could probably optimize things a bit
+ */
+virt_page_table_tlb_miss:
+ /* Are we hitting a kernel page table ? */
+ andi. r10,r15,0x8
+
+ /* The cool thing now is that r10 contains 0 for user and 8 for kernel,
+ * and we happen to have the swapper_pg_dir at offset 8 from the user
+ * pgdir in the PACA :-).
+ */
+ add r11,r10,r13
+
+ /* If kernel, we need to clear MAS1 TID */
+ beq 1f
+ /* XXX replace the RMW cycles with immediate loads + writes */
+ mfspr r10,SPRN_MAS1
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+1:
+BEGIN_MMU_FTR_SECTION
+ /* Search if we already have a TLB entry for that virtual address, and
+ * if we do, bail out.
+ */
+ PPC_TLBSRX_DOT(0,r16)
+ beq virt_page_table_tlb_miss_done
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
+
+ /* Now, we need to walk the page tables. First check if we are in
+ * range.
+ */
+ rldicl. r10,r16,64-(VPTE_INDEX_SIZE+3),VPTE_INDEX_SIZE+3+4
+ bne- virt_page_table_tlb_miss_fault
+
+ /* Get the PGD pointer */
+ ld r15,PACAPGD(r11)
+ cmpldi cr0,r15,0
+ beq- virt_page_table_tlb_miss_fault
+
+ /* Get to PGD entry */
+ rldicl r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq virt_page_table_tlb_miss_fault
+
+#ifndef CONFIG_PPC_64K_PAGES
+ /* Get to PUD entry */
+ rldicl r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq virt_page_table_tlb_miss_fault
+#endif /* CONFIG_PPC_64K_PAGES */
+
+ /* Get to PMD entry */
+ rldicl r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq virt_page_table_tlb_miss_fault
+
+ /* Ok, we're all right, we can now create a kernel translation for
+ * a 4K or 64K page from r16 -> r15.
+ */
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE for now is base page size always
+ * MAS 2 : Use defaults
+ * MAS 3+7 : Needs to be done
+ *
+ * So we only do MAS 2 and 3 for now...
+ */
+ clrldi r11,r15,4 /* remove region ID from RPN */
+ ori r10,r11,1 /* Or-in SR */
+
+BEGIN_MMU_FTR_SECTION
+ srdi r16,r10,32
+ mtspr SPRN_MAS3,r10
+ mtspr SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+ mtspr SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
+
+ tlbwe
+
+BEGIN_MMU_FTR_SECTION
+virt_page_table_tlb_miss_done:
+
+ /* We have overriden MAS2:EPN but currently our primary TLB miss
+ * handler will always restore it so that should not be an issue,
+ * if we ever optimize the primary handler to not write MAS2 on
+ * some cases, we'll have to restore MAS2:EPN here based on the
+ * original fault's DEAR. If we do that we have to modify the
+ * ITLB miss handler to also store SRR0 in the exception frame
+ * as DEAR.
+ *
+ * However, one nasty thing we did is we cleared the reservation
+ * (well, potentially we did). We do a trick here thus if we
+ * are not a level 0 exception (we interrupted the TLB miss) we
+ * offset the return address by -4 in order to replay the tlbsrx
+ * instruction there
+ */
+ subf r10,r13,r12
+ cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE
+ bne- 1f
+ ld r11,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
+ addi r10,r11,-4
+ std r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
+1:
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
+ /* Return to caller, normal case */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK);
+ TLB_MISS_EPILOG_SUCCESS
+ rfi
+
+virt_page_table_tlb_miss_fault:
+ /* If we fault here, things are a little bit tricky. We need to call
+ * either data or instruction store fault, and we need to retreive
+ * the original fault address and ESR (for data).
+ *
+ * The thing is, we know that in normal circumstances, this is
+ * always called as a second level tlb miss for SW load or as a first
+ * level TLB miss for HW load, so we should be able to peek at the
+ * relevant informations in the first exception frame in the PACA.
+ *
+ * However, we do need to double check that, because we may just hit
+ * a stray kernel pointer or a userland attack trying to hit those
+ * areas. If that is the case, we do a data fault. (We can't get here
+ * from an instruction tlb miss anyway).
+ *
+ * Note also that when going to a fault, we must unwind the previous
+ * level as well. Since we are doing that, we don't need to clear or
+ * restore the TLB reservation neither.
+ */
+ subf r10,r13,r12
+ cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE
+ bne- virt_page_table_tlb_miss_whacko_fault
+
+ /* We dig the original DEAR and ESR from slot 0 */
+ ld r15,EX_TLB_DEAR+PACA_EXTLB(r13)
+ ld r16,EX_TLB_ESR+PACA_EXTLB(r13)
+
+ /* We check for the "special" ESR value for instruction faults */
+ cmpdi cr0,r16,-1
+ beq 1f
+ mtspr SPRN_DEAR,r15
+ mtspr SPRN_ESR,r16
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT);
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT);
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+virt_page_table_tlb_miss_whacko_fault:
+ /* The linear fault will restart everything so ESR and DEAR will
+ * not have been clobbered, let's just fault with what we have
+ */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_FAULT);
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+
+
+/**************************************************************
+ * *
+ * TLB miss handling for Book3E with hw page table support *
+ * *
+ **************************************************************/
+
+
+/* Data TLB miss */
+ START_EXCEPTION(data_tlb_miss_htw)
+ TLB_MISS_PROLOG
+
+ /* Now we handle the fault proper. We only save DEAR in normal
+ * fault case since that's the only interesting values here.
+ * We could probably also optimize by not saving SRR0/1 in the
+ * linear mapping case but I'll leave that for later
+ */
+ mfspr r14,SPRN_ESR
+ mfspr r16,SPRN_DEAR /* get faulting address */
+ srdi r11,r16,60 /* get region */
+ cmpldi cr0,r11,0xc /* linear mapping ? */
+ TLB_MISS_STATS_SAVE_INFO
+ beq tlb_load_linear /* yes -> go to linear map load */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ cmpldi cr0,r11,0 /* Check for user region */
+ ld r15,PACAPGD(r13) /* Load user pgdir */
+ beq htw_tlb_miss
+
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ cmpldi cr0,r11,8 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */
+ beq+ htw_tlb_miss
+
+ /* We got a crappy address, just fault with whatever DEAR and ESR
+ * are here
+ */
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+
+/* Instruction TLB miss */
+ START_EXCEPTION(instruction_tlb_miss_htw)
+ TLB_MISS_PROLOG
+
+ /* If we take a recursive fault, the second level handler may need
+ * to know whether we are handling a data or instruction fault in
+ * order to get to the right store fault handler. We provide that
+ * info by keeping a crazy value for ESR in r14
+ */
+ li r14,-1 /* store to exception frame is done later */
+
+ /* Now we handle the fault proper. We only save DEAR in the non
+ * linear mapping case since we know the linear mapping case will
+ * not re-enter. We could indeed optimize and also not save SRR0/1
+ * in the linear mapping case but I'll leave that for later
+ *
+ * Faulting address is SRR0 which is already in r16
+ */
+ srdi r11,r16,60 /* get region */
+ cmpldi cr0,r11,0xc /* linear mapping ? */
+ TLB_MISS_STATS_SAVE_INFO
+ beq tlb_load_linear /* yes -> go to linear map load */
+
+ /* We do the user/kernel test for the PID here along with the RW test
+ */
+ cmpldi cr0,r11,0 /* Check for user region */
+ ld r15,PACAPGD(r13) /* Load user pgdir */
+ beq htw_tlb_miss
+
+ /* XXX replace the RMW cycles with immediate loads + writes */
+1: mfspr r10,SPRN_MAS1
+ cmpldi cr0,r11,8 /* Check for vmalloc region */
+ rlwinm r10,r10,0,16,1 /* Clear TID */
+ mtspr SPRN_MAS1,r10
+ ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */
+ beq+ htw_tlb_miss
+
+ /* We got a crappy address, just fault */
+ TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = PGD pointer
+ * r14 = ESR
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will save/restore things for us
+ */
+htw_tlb_miss:
+ /* Search if we already have a TLB entry for that virtual address, and
+ * if we do, bail out.
+ *
+ * MAS1:IND should be already set based on MAS4
+ */
+ PPC_TLBSRX_DOT(0,r16)
+ beq htw_tlb_miss_done
+
+ /* Now, we need to walk the page tables. First check if we are in
+ * range.
+ */
+ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+ bne- htw_tlb_miss_fault
+
+ /* Get the PGD pointer */
+ cmpldi cr0,r15,0
+ beq- htw_tlb_miss_fault
+
+ /* Get to PGD entry */
+ rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq htw_tlb_miss_fault
+
+#ifndef CONFIG_PPC_64K_PAGES
+ /* Get to PUD entry */
+ rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq htw_tlb_miss_fault
+#endif /* CONFIG_PPC_64K_PAGES */
+
+ /* Get to PMD entry */
+ rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3
+ clrrdi r10,r11,3
+ ldx r15,r10,r15
+ cmpldi cr0,r15,0
+ beq htw_tlb_miss_fault
+
+ /* Ok, we're all right, we can now create an indirect entry for
+ * a 1M or 256M page.
+ *
+ * The last trick is now that because we use "half" pages for
+ * the HTW (1M IND is 2K and 256M IND is 32K) we need to account
+ * for an added LSB bit to the RPN. For 64K pages, there is no
+ * problem as we already use 32K arrays (half PTE pages), but for
+ * 4K page we need to extract a bit from the virtual address and
+ * insert it into the "PA52" bit of the RPN.
+ */
+#ifndef CONFIG_PPC_64K_PAGES
+ rlwimi r15,r16,32-9,20,20
+#endif
+ /* Now we build the MAS:
+ *
+ * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
+ * MAS 1 : Almost fully setup
+ * - PID already updated by caller if necessary
+ * - TSIZE for now is base ind page size always
+ * MAS 2 : Use defaults
+ * MAS 3+7 : Needs to be done
+ */
+#ifdef CONFIG_PPC_64K_PAGES
+ ori r10,r15,(BOOK3E_PAGESZ_64K << MAS3_SPSIZE_SHIFT)
+#else
+ ori r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
+#endif
+
+BEGIN_MMU_FTR_SECTION
+ srdi r16,r10,32
+ mtspr SPRN_MAS3,r10
+ mtspr SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+ mtspr SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
+
+ tlbwe
+
+htw_tlb_miss_done:
+ /* We don't bother with restoring DEAR or ESR since we know we are
+ * level 0 and just going back to userland. They are only needed
+ * if you are going to take an access fault
+ */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK)
+ TLB_MISS_EPILOG_SUCCESS
+ rfi
+
+htw_tlb_miss_fault:
+ /* We need to check if it was an instruction miss. We know this
+ * though because r14 would contain -1
+ */
+ cmpdi cr0,r14,-1
+ beq 1f
+ mtspr SPRN_DEAR,r16
+ mtspr SPRN_ESR,r14
+ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_data_storage_book3e
+1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT)
+ TLB_MISS_EPILOG_ERROR
+ b exc_instruction_storage_book3e
+
+/*
+ * This is the guts of "any" level TLB miss handler for kernel linear
+ * mapping misses. We are entered with:
+ *
+ *
+ * r16 = faulting address
+ * r15 = crap (free to use)
+ * r14 = ESR (data) or -1 (instruction)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * In addition we know that we will not re-enter, so in theory, we could
+ * use a simpler epilog not restoring SRR0/1 etc.. but we'll do that later.
+ *
+ * We also need to be careful about MAS registers here & TLB reservation,
+ * as we know we'll have clobbered them if we interrupt the main TLB miss
+ * handlers in which case we probably want to do a full restart at level
+ * 0 rather than saving / restoring the MAS.
+ *
+ * Note: If we care about performance of that core, we can easily shuffle
+ * a few things around
+ */
+tlb_load_linear:
+ /* For now, we assume the linear mapping is contiguous and stops at
+ * linear_map_top. We also assume the size is a multiple of 1G, thus
+ * we only use 1G pages for now. That might have to be changed in a
+ * final implementation, especially when dealing with hypervisors
+ */
+ ld r11,PACATOC(r13)
+ ld r11,linear_map_top@got(r11)
+ ld r10,0(r11)
+ cmpld cr0,r10,r16
+ bge tlb_load_linear_fault
+
+ /* MAS1 need whole new setup. */
+ li r15,(BOOK3E_PAGESZ_1GB<<MAS1_TSIZE_SHIFT)
+ oris r15,r15,MAS1_VALID@h /* MAS1 needs V and TSIZE */
+ mtspr SPRN_MAS1,r15
+
+ /* Already somebody there ? */
+ PPC_TLBSRX_DOT(0,r16)
+ beq tlb_load_linear_done
+
+ /* Now we build the remaining MAS. MAS0 and 2 should be fine
+ * with their defaults, which leaves us with MAS 3 and 7. The
+ * mapping is linear, so we just take the address, clear the
+ * region bits, and or in the permission bits which are currently
+ * hard wired
+ */
+ clrrdi r10,r16,30 /* 1G page index */
+ clrldi r10,r10,4 /* clear region bits */
+ ori r10,r10,MAS3_SR|MAS3_SW|MAS3_SX
+
+BEGIN_MMU_FTR_SECTION
+ srdi r16,r10,32
+ mtspr SPRN_MAS3,r10
+ mtspr SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+ mtspr SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
+
+ tlbwe
+
+tlb_load_linear_done:
+ /* We use the "error" epilog for success as we do want to
+ * restore to the initial faulting context, whatever it was.
+ * We do that because we can't resume a fault within a TLB
+ * miss handler, due to MAS and TLB reservation being clobbered.
+ */
+ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_LINEAR)
+ TLB_MISS_EPILOG_ERROR
+ rfi
+
+tlb_load_linear_fault:
+ /* We keep the DEAR and ESR around, this shouldn't have happened */
+ cmpdi cr0,r14,-1
+ beq 1f
+ TLB_MISS_EPILOG_ERROR_SPECIAL
+ b exc_data_storage_book3e
+1: TLB_MISS_EPILOG_ERROR_SPECIAL
+ b exc_instruction_storage_book3e
+
+
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+.tlb_stat_inc:
+1: ldarx r8,0,r9
+ addi r8,r8,1
+ stdcx. r8,0,r9
+ bne- 1b
+ blr
+#endif
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index ad2eb4d34dd..2fbc680c2c7 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -7,8 +7,8 @@
*
* -- BenH
*
- * Copyright 2008 Ben Herrenschmidt <benh@kernel.crashing.org>
- * IBM Corp.
+ * Copyright 2008,2009 Ben Herrenschmidt <benh@kernel.crashing.org>
+ * IBM Corp.
*
* Derived from arch/ppc/mm/init.c:
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
@@ -34,12 +34,71 @@
#include <linux/pagemap.h>
#include <linux/preempt.h>
#include <linux/spinlock.h>
+#include <linux/lmb.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+#include <asm/code-patching.h>
#include "mmu_decl.h"
+#ifdef CONFIG_PPC_BOOK3E
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
+ [MMU_PAGE_4K] = {
+ .shift = 12,
+ .enc = BOOK3E_PAGESZ_4K,
+ },
+ [MMU_PAGE_16K] = {
+ .shift = 14,
+ .enc = BOOK3E_PAGESZ_16K,
+ },
+ [MMU_PAGE_64K] = {
+ .shift = 16,
+ .enc = BOOK3E_PAGESZ_64K,
+ },
+ [MMU_PAGE_1M] = {
+ .shift = 20,
+ .enc = BOOK3E_PAGESZ_1M,
+ },
+ [MMU_PAGE_16M] = {
+ .shift = 24,
+ .enc = BOOK3E_PAGESZ_16M,
+ },
+ [MMU_PAGE_256M] = {
+ .shift = 28,
+ .enc = BOOK3E_PAGESZ_256M,
+ },
+ [MMU_PAGE_1G] = {
+ .shift = 30,
+ .enc = BOOK3E_PAGESZ_1GB,
+ },
+};
+static inline int mmu_get_tsize(int psize)
+{
+ return mmu_psize_defs[psize].enc;
+}
+#else
+static inline int mmu_get_tsize(int psize)
+{
+ /* This isn't used on !Book3E for now */
+ return 0;
+}
+#endif
+
+/* The variables below are currently only used on 64-bit Book3E
+ * though this will probably be made common with other nohash
+ * implementations at some point
+ */
+#ifdef CONFIG_PPC64
+
+int mmu_linear_psize; /* Page size used for the linear mapping */
+int mmu_pte_psize; /* Page size used for PTE pages */
+int mmu_vmemmap_psize; /* Page size used for the virtual mem map */
+int book3e_htw_enabled; /* Is HW tablewalk enabled ? */
+unsigned long linear_map_top; /* Top of linear mapping */
+
+#endif /* CONFIG_PPC64 */
+
/*
* Base TLB flushing operations:
*
@@ -67,18 +126,24 @@ void local_flush_tlb_mm(struct mm_struct *mm)
}
EXPORT_SYMBOL(local_flush_tlb_mm);
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+ int tsize, int ind)
{
unsigned int pid;
preempt_disable();
- pid = vma ? vma->vm_mm->context.id : 0;
+ pid = mm ? mm->context.id : 0;
if (pid != MMU_NO_CONTEXT)
- _tlbil_va(vmaddr, pid);
+ _tlbil_va(vmaddr, pid, tsize, ind);
preempt_enable();
}
-EXPORT_SYMBOL(local_flush_tlb_page);
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+ __local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+ mmu_get_tsize(mmu_virtual_psize), 0);
+}
+EXPORT_SYMBOL(local_flush_tlb_page);
/*
* And here are the SMP non-local implementations
@@ -87,9 +152,17 @@ EXPORT_SYMBOL(local_flush_tlb_page);
static DEFINE_SPINLOCK(tlbivax_lock);
+static int mm_is_core_local(struct mm_struct *mm)
+{
+ return cpumask_subset(mm_cpumask(mm),
+ topology_thread_cpumask(smp_processor_id()));
+}
+
struct tlb_flush_param {
unsigned long addr;
unsigned int pid;
+ unsigned int tsize;
+ unsigned int ind;
};
static void do_flush_tlb_mm_ipi(void *param)
@@ -103,7 +176,7 @@ static void do_flush_tlb_page_ipi(void *param)
{
struct tlb_flush_param *p = param;
- _tlbil_va(p->addr, p->pid);
+ _tlbil_va(p->addr, p->pid, p->tsize, p->ind);
}
@@ -131,7 +204,7 @@ void flush_tlb_mm(struct mm_struct *mm)
pid = mm->context.id;
if (unlikely(pid == MMU_NO_CONTEXT))
goto no_context;
- if (!cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
+ if (!mm_is_core_local(mm)) {
struct tlb_flush_param p = { .pid = pid };
/* Ignores smp_processor_id() even if set. */
smp_call_function_many(mm_cpumask(mm),
@@ -143,37 +216,49 @@ void flush_tlb_mm(struct mm_struct *mm)
}
EXPORT_SYMBOL(flush_tlb_mm);
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+ int tsize, int ind)
{
struct cpumask *cpu_mask;
unsigned int pid;
preempt_disable();
- pid = vma ? vma->vm_mm->context.id : 0;
+ pid = mm ? mm->context.id : 0;
if (unlikely(pid == MMU_NO_CONTEXT))
goto bail;
- cpu_mask = mm_cpumask(vma->vm_mm);
- if (!cpumask_equal(cpu_mask, cpumask_of(smp_processor_id()))) {
+ cpu_mask = mm_cpumask(mm);
+ if (!mm_is_core_local(mm)) {
/* If broadcast tlbivax is supported, use it */
if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
if (lock)
spin_lock(&tlbivax_lock);
- _tlbivax_bcast(vmaddr, pid);
+ _tlbivax_bcast(vmaddr, pid, tsize, ind);
if (lock)
spin_unlock(&tlbivax_lock);
goto bail;
} else {
- struct tlb_flush_param p = { .pid = pid, .addr = vmaddr };
+ struct tlb_flush_param p = {
+ .pid = pid,
+ .addr = vmaddr,
+ .tsize = tsize,
+ .ind = ind,
+ };
/* Ignores smp_processor_id() even if set in cpu_mask */
smp_call_function_many(cpu_mask,
do_flush_tlb_page_ipi, &p, 1);
}
}
- _tlbil_va(vmaddr, pid);
+ _tlbil_va(vmaddr, pid, tsize, ind);
bail:
preempt_enable();
}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+ __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+ mmu_get_tsize(mmu_virtual_psize), 0);
+}
EXPORT_SYMBOL(flush_tlb_page);
#endif /* CONFIG_SMP */
@@ -207,3 +292,156 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
flush_tlb_mm(vma->vm_mm);
}
EXPORT_SYMBOL(flush_tlb_range);
+
+void tlb_flush(struct mmu_gather *tlb)
+{
+ flush_tlb_mm(tlb->mm);
+
+ /* Push out batch of freed page tables */
+ pte_free_finish();
+}
+
+/*
+ * Below are functions specific to the 64-bit variant of Book3E though that
+ * may change in the future
+ */
+
+#ifdef CONFIG_PPC64
+
+/*
+ * Handling of virtual linear page tables or indirect TLB entries
+ * flushing when PTE pages are freed
+ */
+void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
+{
+ int tsize = mmu_psize_defs[mmu_pte_psize].enc;
+
+ if (book3e_htw_enabled) {
+ unsigned long start = address & PMD_MASK;
+ unsigned long end = address + PMD_SIZE;
+ unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift;
+
+ /* This isn't the most optimal, ideally we would factor out the
+ * while preempt & CPU mask mucking around, or even the IPI but
+ * it will do for now
+ */
+ while (start < end) {
+ __flush_tlb_page(tlb->mm, start, tsize, 1);
+ start += size;
+ }
+ } else {
+ unsigned long rmask = 0xf000000000000000ul;
+ unsigned long rid = (address & rmask) | 0x1000000000000000ul;
+ unsigned long vpte = address & ~rmask;
+
+#ifdef CONFIG_PPC_64K_PAGES
+ vpte = (vpte >> (PAGE_SHIFT - 4)) & ~0xfffful;
+#else
+ vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful;
+#endif
+ vpte |= rid;
+ __flush_tlb_page(tlb->mm, vpte, tsize, 0);
+ }
+}
+
+/*
+ * Early initialization of the MMU TLB code
+ */
+static void __early_init_mmu(int boot_cpu)
+{
+ extern unsigned int interrupt_base_book3e;
+ extern unsigned int exc_data_tlb_miss_htw_book3e;
+ extern unsigned int exc_instruction_tlb_miss_htw_book3e;
+
+ unsigned int *ibase = &interrupt_base_book3e;
+ unsigned int mas4;
+
+ /* XXX This will have to be decided at runtime, but right
+ * now our boot and TLB miss code hard wires it. Ideally
+ * we should find out a suitable page size and patch the
+ * TLB miss code (either that or use the PACA to store
+ * the value we want)
+ */
+ mmu_linear_psize = MMU_PAGE_1G;
+
+ /* XXX This should be decided at runtime based on supported
+ * page sizes in the TLB, but for now let's assume 16M is
+ * always there and a good fit (which it probably is)
+ */
+ mmu_vmemmap_psize = MMU_PAGE_16M;
+
+ /* Check if HW tablewalk is present, and if yes, enable it by:
+ *
+ * - patching the TLB miss handlers to branch to the
+ * one dedicates to it
+ *
+ * - setting the global book3e_htw_enabled
+ *
+ * - Set MAS4:INDD and default page size
+ */
+
+ /* XXX This code only checks for TLB 0 capabilities and doesn't
+ * check what page size combos are supported by the HW. It
+ * also doesn't handle the case where a separate array holds
+ * the IND entries from the array loaded by the PT.
+ */
+ if (boot_cpu) {
+ unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
+
+ /* Check if HW loader is supported */
+ if ((tlb0cfg & TLBnCFG_IND) &&
+ (tlb0cfg & TLBnCFG_PT)) {
+ patch_branch(ibase + (0x1c0 / 4),
+ (unsigned long)&exc_data_tlb_miss_htw_book3e, 0);
+ patch_branch(ibase + (0x1e0 / 4),
+ (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0);
+ book3e_htw_enabled = 1;
+ }
+ pr_info("MMU: Book3E Page Tables %s\n",
+ book3e_htw_enabled ? "Enabled" : "Disabled");
+ }
+
+ /* Set MAS4 based on page table setting */
+
+ mas4 = 0x4 << MAS4_WIMGED_SHIFT;
+ if (book3e_htw_enabled) {
+ mas4 |= mas4 | MAS4_INDD;
+#ifdef CONFIG_PPC_64K_PAGES
+ mas4 |= BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT;
+ mmu_pte_psize = MMU_PAGE_256M;
+#else
+ mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT;
+ mmu_pte_psize = MMU_PAGE_1M;
+#endif
+ } else {
+#ifdef CONFIG_PPC_64K_PAGES
+ mas4 |= BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT;
+#else
+ mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT;
+#endif
+ mmu_pte_psize = mmu_virtual_psize;
+ }
+ mtspr(SPRN_MAS4, mas4);
+
+ /* Set the global containing the top of the linear mapping
+ * for use by the TLB miss code
+ */
+ linear_map_top = lmb_end_of_DRAM();
+
+ /* A sync won't hurt us after mucking around with
+ * the MMU configuration
+ */
+ mb();
+}
+
+void __init early_init_mmu(void)
+{
+ __early_init_mmu(1);
+}
+
+void __cpuinit early_init_mmu_secondary(void)
+{
+ __early_init_mmu(0);
+}
+
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 3037911279b..bbdc5b577b8 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -39,7 +39,7 @@
/*
* 40x implementation needs only tlbil_va
*/
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
/* We run the search with interrupts disabled because we have to change
* the PID and I don't want to preempt when that happens.
*/
@@ -71,7 +71,7 @@ _GLOBAL(_tlbil_va)
* 440 implementation uses tlbsx/we for tlbil_va and a full sweep
* of the TLB for everything else.
*/
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
mfspr r5,SPRN_MMUCR
rlwimi r5,r4,0,24,31 /* Set TID */
@@ -124,8 +124,6 @@ _GLOBAL(_tlbil_pid)
* to have the larger code path before the _SECTION_ELSE
*/
-#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
- MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
/*
* Flush MMU TLB on the local processor
*/
@@ -170,7 +168,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX)
* Flush MMU TLB for a particular address, but only on the local processor
* (no broadcast)
*/
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
mfmsr r10
wrteei 0
slwi r4,r4,16
@@ -191,6 +189,85 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
isync
1: wrtee r10
blr
+#elif defined(CONFIG_PPC_BOOK3E)
+/*
+ * New Book3E (>= 2.06) implementation
+ *
+ * Note: We may be able to get away without the interrupt masking stuff
+ * if we save/restore MAS6 on exceptions that might modify it
+ */
+_GLOBAL(_tlbil_pid)
+ slwi r4,r3,MAS6_SPID_SHIFT
+ mfmsr r10
+ wrteei 0
+ mtspr SPRN_MAS6,r4
+ PPC_TLBILX_PID(0,0)
+ wrtee r10
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_pid_noind)
+ slwi r4,r3,MAS6_SPID_SHIFT
+ mfmsr r10
+ ori r4,r4,MAS6_SIND
+ wrteei 0
+ mtspr SPRN_MAS6,r4
+ PPC_TLBILX_PID(0,0)
+ wrtee r10
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_all)
+ PPC_TLBILX_ALL(0,0)
+ msync
+ isync
+ blr
+
+_GLOBAL(_tlbil_va)
+ mfmsr r10
+ wrteei 0
+ cmpwi cr0,r6,0
+ slwi r4,r4,MAS6_SPID_SHIFT
+ rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+ beq 1f
+ rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
+ PPC_TLBILX_VA(0,r3)
+ msync
+ isync
+ wrtee r10
+ blr
+
+_GLOBAL(_tlbivax_bcast)
+ mfmsr r10
+ wrteei 0
+ cmpwi cr0,r6,0
+ slwi r4,r4,MAS6_SPID_SHIFT
+ rlwimi r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+ beq 1f
+ rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
+ PPC_TLBIVAX(0,r3)
+ eieio
+ tlbsync
+ sync
+ wrtee r10
+ blr
+
+_GLOBAL(set_context)
+#ifdef CONFIG_BDI_SWITCH
+ /* Context switch the PTE pointer for the Abatron BDI2000.
+ * The PGDIR is the second parameter.
+ */
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ stw r4, 0x4(r5)
+#endif
+ mtspr SPRN_PID,r3
+ isync /* Force context change */
+ blr
#else
#error Unsupported processor type !
#endif
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index a6e43cb6f82..ec64264f7a5 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -40,6 +40,16 @@ config HCU4
help
This option enables support for the Nestal Maschinen HCU4 board.
+config HOTFOOT
+ bool "Hotfoot"
+ depends on 40x
+ default n
+ select 405EP
+ select PPC40x_SIMPLE
+ select PCI
+ help
+ This option enables support for the ESTEEM 195E Hotfoot board.
+
config KILAUEA
bool "Kilauea"
depends on 40x
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index 5fd5a597400..546bbc229d1 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -54,7 +54,8 @@ static char *board[] __initdata = {
"amcc,acadia",
"amcc,haleakala",
"amcc,kilauea",
- "amcc,makalu"
+ "amcc,makalu",
+ "est,hotfoot"
};
static int __init ppc40x_probe(void)
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 90e3192611a..7486bffd3eb 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -129,6 +129,18 @@ config REDWOOD
help
This option enables support for the AMCC PPC460SX Redwood board.
+config EIGER
+ bool "Eiger"
+ depends on 44x
+ default n
+ select PPC44x_SIMPLE
+ select 460SX
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ select IBM_NEW_EMAC_RGMII
+ help
+ This option enables support for the AMCC PPC460SX evaluation board.
+
config YOSEMITE
bool "Yosemite"
depends on 44x
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index 5bcd441885e..e8c23ccaa1f 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -55,6 +55,7 @@ static char *board[] __initdata = {
"amcc,canyonlands",
"amcc,glacier",
"ibm,ebony",
+ "amcc,eiger",
"amcc,katmai",
"amcc,rainier",
"amcc,redwood",
diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c
index c2af169c1d1..7a5de9eb3c7 100644
--- a/arch/powerpc/platforms/82xx/mgcoge.c
+++ b/arch/powerpc/platforms/82xx/mgcoge.c
@@ -50,16 +50,63 @@ struct cpm_pin {
static __initdata struct cpm_pin mgcoge_pins[] = {
/* SMC2 */
- {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
/* SCC4 */
- {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {3, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {3, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+ /* FCC1 */
+ {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+
+ {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* FCC2 */
+ {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+ {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* MDC */
+ {0, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+
+#if defined(CONFIG_I2C_CPM)
+ /* I2C */
+ {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+ {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+#endif
};
static void __init init_ioports(void)
@@ -68,12 +115,16 @@ static void __init init_ioports(void)
for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) {
const struct cpm_pin *pin = &mgcoge_pins[i];
- cpm2_set_pin(pin->port - 1, pin->pin, pin->flags);
+ cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
}
static void __init mgcoge_setup_arch(void)
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 8054c685d32..30394b409b3 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -29,7 +29,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/cpm2_pic.h>
-#include "pq2ads.h"
#include "pq2.h"
static void __init mpc8272_ads_pic_init(void)
@@ -100,6 +99,15 @@ static struct cpm_pin mpc8272_ads_pins[] = {
/* I2C */
{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+
+ /* USB */
+ {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
};
static void __init init_ioports(void)
@@ -113,6 +121,8 @@ static void __init init_ioports(void)
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
@@ -144,12 +154,22 @@ static void __init mpc8272_ads_setup_arch(void)
return;
}
+#define BCSR1_FETHIEN 0x08000000
+#define BCSR1_FETH_RST 0x04000000
+#define BCSR1_RS232_EN1 0x02000000
+#define BCSR1_RS232_EN2 0x01000000
+#define BCSR3_USB_nEN 0x80000000
+#define BCSR3_FETHIEN2 0x10000000
+#define BCSR3_FETH2_RST 0x08000000
+
clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN);
setbits32(&bcsr[1], BCSR1_FETH_RST);
clrbits32(&bcsr[3], BCSR3_FETHIEN2);
setbits32(&bcsr[3], BCSR3_FETH2_RST);
+ clrbits32(&bcsr[3], BCSR3_USB_nEN);
+
iounmap(bcsr);
init_ioports();
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 083ebee9a16..f49a2548c5f 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -75,11 +75,11 @@ config MPC837x_MDS
This option enables support for the MPC837x MDS Processor Board.
config MPC837x_RDB
- bool "Freescale MPC837x RDB"
+ bool "Freescale MPC837x RDB/WLAN"
select DEFAULT_UIMAGE
select PPC_MPC837x
help
- This option enables support for the MPC837x RDB Board.
+ This option enables support for the MPC837x RDB and WLAN Boards.
config SBC834x
bool "Wind River SBC834x"
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 76f3b32a155..a1908d26124 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -17,10 +17,32 @@
#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
+static void mpc837x_rdb_sd_cfg(void)
+{
+ void __iomem *im;
+
+ im = ioremap(get_immrbase(), 0x1000);
+ if (!im) {
+ WARN_ON(1);
+ return;
+ }
+
+ /*
+ * On RDB boards (in contrast to MDS) USBB pins are used for SD only,
+ * so we can safely mux them away from the USB block.
+ */
+ clrsetbits_be32(im + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USBB_MASK,
+ MPC837X_SICRL_SD);
+ clrsetbits_be32(im + MPC83XX_SICRH_OFFS, MPC837X_SICRH_SPI_MASK,
+ MPC837X_SICRH_SD);
+ iounmap(im);
+}
+
/* ************************************************************************
*
* Setup the architecture
@@ -42,6 +64,7 @@ static void __init mpc837x_rdb_setup_arch(void)
mpc83xx_add_bridge(np);
#endif
mpc837x_usb_cfg();
+ mpc837x_rdb_sd_cfg();
}
static struct of_device_id mpc837x_ids[] = {
@@ -86,11 +109,12 @@ static int __init mpc837x_rdb_probe(void)
return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") ||
of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") ||
- of_flat_dt_is_compatible(root, "fsl,mpc8379rdb");
+ of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") ||
+ of_flat_dt_is_compatible(root, "fsl,mpc8377wlan");
}
define_machine(mpc837x_rdb) {
- .name = "MPC837x RDB",
+ .name = "MPC837x RDB/WLAN",
.probe = mpc837x_rdb_probe,
.setup_arch = mpc837x_rdb_setup_arch,
.init_IRQ = mpc837x_rdb_init_IRQ,
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index d1dc5b0b4fb..0fea8811d45 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -30,6 +30,8 @@
#define MPC8315_SICRL_USB_ULPI 0x00000054
#define MPC837X_SICRL_USB_MASK 0xf0000000
#define MPC837X_SICRL_USB_ULPI 0x50000000
+#define MPC837X_SICRL_USBB_MASK 0x30000000
+#define MPC837X_SICRL_SD 0x20000000
/* system i/o configuration register high */
#define MPC83XX_SICRH_OFFS 0x118
@@ -38,6 +40,8 @@
#define MPC831X_SICRH_USB_ULPI 0x000000a0
#define MPC8315_SICRH_USB_MASK 0x0000ff00
#define MPC8315_SICRH_USB_ULPI 0x00000000
+#define MPC837X_SICRH_SPI_MASK 0x00000003
+#define MPC837X_SICRH_SD 0x00000001
/* USB Control Register */
#define FSL_USB2_CONTROL_OFFS 0x500
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index a9b41668897..d3a975e8fd3 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -55,6 +55,15 @@ config MPC85xx_DS
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
+config MPC85xx_RDB
+ bool "Freescale MPC85xx RDB"
+ select PPC_I8259
+ select DEFAULT_UIMAGE
+ select FSL_ULI1575
+ select SWIOTLB
+ help
+ This option enables support for the MPC85xx RDB (P2020 RDB) board
+
config SOCRATES
bool "Socrates"
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 835733f2b12..9098aea0cf3 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -9,10 +9,11 @@ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o
obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
+obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
-obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o \ No newline at end of file
+obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 055ff417bae..004b7d36cdb 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -96,7 +96,8 @@ static void __init mpc8536_ds_setup_arch(void)
#ifdef CONFIG_SWIOTLB
if (lmb_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
- set_pci_dma_ops(&swiotlb_pci_dma_ops);
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 849c0ac0025..544011a562f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -192,7 +192,8 @@ static void __init mpc85xx_ds_setup_arch(void)
#ifdef CONFIG_SWIOTLB
if (lmb_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
- set_pci_dma_ops(&swiotlb_pci_dma_ops);
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index bfb32834ab0..3909d57b86e 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -47,6 +47,7 @@
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include <sysdev/simple_gpio.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include <asm/mpic.h>
@@ -254,7 +255,8 @@ static void __init mpc85xx_mds_setup_arch(void)
#ifdef CONFIG_SWIOTLB
if (lmb_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
- set_pci_dma_ops(&swiotlb_pci_dma_ops);
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
}
@@ -304,6 +306,9 @@ static struct of_device_id mpc85xx_ids[] = {
static int __init mpc85xx_publish_devices(void)
{
+ if (machine_is(mpc8569_mds))
+ simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
+
/* Publish the QE devices */
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
new file mode 100644
index 00000000000..c8468de4acf
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -0,0 +1,141 @@
+/*
+ * MPC85xx RDB Board Setup
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+
+void __init mpc85xx_rdb_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Failed to map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET |
+ MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_init(mpic);
+
+}
+
+/*
+ * Setup the architecture
+ */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+static void __init mpc85xx_rdb_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_node_by_type(np, "pci") {
+ if (of_device_is_compatible(np, "fsl,mpc8548-pcie"))
+ fsl_add_bridge(np, 0);
+ }
+
+#endif
+
+#ifdef CONFIG_SMP
+ mpc85xx_smp_init();
+#endif
+
+ printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
+}
+
+static struct of_device_id __initdata mpc85xxrdb_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus", },
+ { .compatible = "gianfar", },
+ {},
+};
+
+static int __init mpc85xxrdb_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
+}
+machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p2020_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,P2020RDB"))
+ return 1;
+ return 0;
+}
+
+define_machine(p2020_rdb) {
+ .name = "P2020 RDB",
+ .probe = p2020_rdb_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index cc27807a8b6..a5ad1c7794b 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -267,6 +267,43 @@ arch_initcall(sbc8560_rtc_init);
#endif /* M48T59 */
+static __u8 __iomem *brstcr;
+
+static int __init sbc8560_bdrstcr_init(void)
+{
+ struct device_node *np;
+ struct resource res;
+
+ np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
+ if (np == NULL) {
+ printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
+ return -ENODEV;
+ }
+
+ of_address_to_resource(np, 0, &res);
+
+ printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start);
+
+ brstcr = ioremap(res.start, res.end - res.start);
+ if(!brstcr)
+ printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
+
+ of_node_put(np);
+
+ return 0;
+}
+
+arch_initcall(sbc8560_bdrstcr_init);
+
+void sbc8560_rstcr_restart(char * cmd)
+{
+ local_irq_disable();
+ if(brstcr)
+ clrbits8(brstcr, 0x80);
+
+ while(1);
+}
+
define_machine(sbc8560) {
.name = "SBC8560",
.probe = sbc8560_probe,
@@ -274,7 +311,7 @@ define_machine(sbc8560) {
.init_IRQ = sbc8560_pic_init,
.show_cpuinfo = sbc8560_show_cpuinfo,
.get_irq = mpic_get_irq,
- .restart = fsl_rstcr_restart,
+ .restart = sbc8560_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 62c592ede64..04160a4cc69 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -25,7 +25,6 @@
#include <sysdev/fsl_soc.h>
-extern volatile unsigned long __secondary_hold_acknowledge;
extern void __early_start(void);
#define BOOT_ENTRY_ADDR_UPPER 0
@@ -80,46 +79,24 @@ smp_85xx_kick_cpu(int nr)
}
static void __init
-smp_85xx_basic_setup(int cpu_nr)
-{
- /* Clear any pending timer interrupts */
- mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
- /* Enable decrementer interrupt */
- mtspr(SPRN_TCR, TCR_DIE);
-}
-
-static void __init
smp_85xx_setup_cpu(int cpu_nr)
{
mpic_setup_this_cpu();
-
- smp_85xx_basic_setup(cpu_nr);
}
struct smp_ops_t smp_85xx_ops = {
.kick_cpu = smp_85xx_kick_cpu,
};
-static int __init smp_dummy_probe(void)
-{
- return NR_CPUS;
-}
-
void __init mpc85xx_smp_init(void)
{
struct device_node *np;
- smp_85xx_ops.message_pass = NULL;
-
np = of_find_node_by_type(NULL, "open-pic");
if (np) {
smp_85xx_ops.probe = smp_mpic_probe;
smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
smp_85xx_ops.message_pass = smp_mpic_message_pass;
- } else {
- smp_85xx_ops.probe = smp_dummy_probe;
- smp_85xx_ops.setup_cpu = smp_85xx_basic_setup;
}
if (cpu_has_feature(CPU_FTR_DBELL))
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 2efa052975e..287f7bd17dd 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -102,8 +102,8 @@ static unsigned int gef_ppc9a_get_pcb_rev(void)
{
unsigned int reg;
- reg = ioread32(ppc9a_regs);
- return (reg >> 8) & 0xff;
+ reg = ioread32be(ppc9a_regs);
+ return (reg >> 16) & 0xff;
}
/* Return the board (software) revision */
@@ -111,8 +111,8 @@ static unsigned int gef_ppc9a_get_board_rev(void)
{
unsigned int reg;
- reg = ioread32(ppc9a_regs);
- return (reg >> 16) & 0xff;
+ reg = ioread32be(ppc9a_regs);
+ return (reg >> 8) & 0xff;
}
/* Return the FPGA revision */
@@ -120,8 +120,26 @@ static unsigned int gef_ppc9a_get_fpga_rev(void)
{
unsigned int reg;
- reg = ioread32(ppc9a_regs);
- return (reg >> 24) & 0xf;
+ reg = ioread32be(ppc9a_regs);
+ return reg & 0xf;
+}
+
+/* Return VME Geographical Address */
+static unsigned int gef_ppc9a_get_vme_geo_addr(void)
+{
+ unsigned int reg;
+
+ reg = ioread32be(ppc9a_regs + 0x4);
+ return reg & 0x1f;
+}
+
+/* Return VME System Controller Status */
+static unsigned int gef_ppc9a_get_vme_is_syscon(void)
+{
+ unsigned int reg;
+
+ reg = ioread32be(ppc9a_regs + 0x4);
+ return (reg >> 9) & 0x1;
}
static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
@@ -131,10 +149,15 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
- ('A' + gef_ppc9a_get_board_rev() - 1));
+ ('A' + gef_ppc9a_get_board_rev()));
seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev());
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ seq_printf(m, "VME geo. addr\t: %u\n", gef_ppc9a_get_vme_geo_addr());
+
+ seq_printf(m, "VME syscon\t: %s\n",
+ gef_ppc9a_get_vme_is_syscon() ? "yes" : "no");
}
static void __init gef_ppc9a_nec_fixup(struct pci_dev *pdev)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 66327024a6a..2aa69a69bcc 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -105,7 +105,8 @@ mpc86xx_hpcn_setup_arch(void)
#ifdef CONFIG_SWIOTLB
if (lmb_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
- set_pci_dma_ops(&swiotlb_pci_dma_ops);
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
}
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index d84bbb508ee..eacea0e3fcc 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -27,7 +27,6 @@
#include "mpc86xx.h"
extern void __secondary_start_mpc86xx(void);
-extern unsigned long __secondary_hold_acknowledge;
#define MCM_PORT_CONFIG_OFFSET 0x10
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 61187bec750..9efc8bda01b 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -57,15 +57,35 @@ config E200
endchoice
-config PPC_BOOK3S_64
- def_bool y
+choice
+ prompt "Processor Type"
depends on PPC64
+ help
+ There are two families of 64 bit PowerPC chips supported.
+ The most common ones are the desktop and server CPUs
+ (POWER3, RS64, POWER4, POWER5, POWER5+, POWER6, ...)
+
+ The other are the "embedded" processors compliant with the
+ "Book 3E" variant of the architecture
+
+config PPC_BOOK3S_64
+ bool "Server processors"
select PPC_FPU
+config PPC_BOOK3E_64
+ bool "Embedded processors"
+ select PPC_FPU # Make it a choice ?
+
+endchoice
+
config PPC_BOOK3S
def_bool y
depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
+config PPC_BOOK3E
+ def_bool y
+ depends on PPC_BOOK3E_64
+
config POWER4_ONLY
bool "Optimize for POWER4"
depends on PPC64 && PPC_BOOK3S
@@ -125,7 +145,7 @@ config 4xx
config BOOKE
bool
- depends on E200 || E500 || 44x
+ depends on E200 || E500 || 44x || PPC_BOOK3E
default y
config FSL_BOOKE
@@ -223,9 +243,17 @@ config PPC_MMU_NOHASH
def_bool y
depends on !PPC_STD_MMU
+config PPC_MMU_NOHASH_32
+ def_bool y
+ depends on PPC_MMU_NOHASH && PPC32
+
+config PPC_MMU_NOHASH_64
+ def_bool y
+ depends on PPC_MMU_NOHASH && PPC64
+
config PPC_BOOK3E_MMU
def_bool y
- depends on FSL_BOOKE
+ depends on FSL_BOOKE || PPC_BOOK3E
config PPC_MM_SLICES
bool
@@ -257,7 +285,7 @@ config PPC_PERF_CTRS
This enables the powerpc-specific perf_counter back-end.
config SMP
- depends on PPC_STD_MMU || FSL_BOOKE
+ depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c
index 443035366c1..9290a7a442d 100644
--- a/arch/powerpc/platforms/amigaone/setup.c
+++ b/arch/powerpc/platforms/amigaone/setup.c
@@ -110,13 +110,16 @@ void __init amigaone_init_IRQ(void)
irq_set_default_host(i8259_get_host());
}
-void __init amigaone_init(void)
+static int __init request_isa_regions(void)
{
request_region(0x00, 0x20, "dma1");
request_region(0x40, 0x20, "timer");
request_region(0x80, 0x10, "dma page reg");
request_region(0xc0, 0x20, "dma2");
+
+ return 0;
}
+machine_device_initcall(amigaone, request_isa_regions);
void amigaone_restart(char *cmd)
{
@@ -161,7 +164,6 @@ define_machine(amigaone) {
.name = "AmigaOne",
.probe = amigaone_probe,
.setup_arch = amigaone_setup_arch,
- .init = amigaone_init,
.show_cpuinfo = amigaone_show_cpuinfo,
.init_IRQ = amigaone_init_IRQ,
.restart = amigaone_restart,
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 50f17bdd3c1..48cd7d2e1b7 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -80,13 +80,6 @@ config SPU_FS_64K_LS
uses 4K pages. This can improve performances of applications
using multiple SPEs by lowering the TLB pressure on them.
-config SPU_TRACE
- tristate "SPU event tracing support"
- depends on SPU_FS && MARKERS
- help
- This option allows reading a trace of spu-related events through
- the sputrace file in procfs.
-
config SPU_BASE
bool
default n
diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
index 07c234f6b2b..e5384557977 100644
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ b/arch/powerpc/platforms/cell/celleb_setup.c
@@ -80,8 +80,7 @@ static void celleb_show_cpuinfo(struct seq_file *m)
static int __init celleb_machine_type_hack(char *ptr)
{
- strncpy(celleb_machine_type, ptr, sizeof(celleb_machine_type));
- celleb_machine_type[sizeof(celleb_machine_type)-1] = 0;
+ strlcpy(celleb_machine_type, ptr, sizeof(celleb_machine_type));
return 0;
}
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 5b34fc211f3..416db17eb18 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -642,7 +642,7 @@ static int dma_fixed_dma_supported(struct device *dev, u64 mask)
static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
-struct dma_mapping_ops dma_iommu_fixed_ops = {
+struct dma_map_ops dma_iommu_fixed_ops = {
.alloc_coherent = dma_fixed_alloc_coherent,
.free_coherent = dma_fixed_free_coherent,
.map_sg = dma_fixed_map_sg,
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index bc97fada48c..f774530075b 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -58,8 +58,6 @@
*/
static cpumask_t of_spin_map;
-extern void generic_secondary_smp_init(unsigned long);
-
/**
* smp_startup_cpu() - start the given cpu
*
diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile
index 99610a6361f..b93f877ba50 100644
--- a/arch/powerpc/platforms/cell/spufs/Makefile
+++ b/arch/powerpc/platforms/cell/spufs/Makefile
@@ -4,7 +4,8 @@ spufs-y += inode.o file.o context.o syscalls.o coredump.o
spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o
spufs-y += switch.o fault.o lscsa_alloc.o
-obj-$(CONFIG_SPU_TRACE) += sputrace.o
+# magic for the trace events
+CFLAGS_sched.o := -I$(src)
# Rules to build switch.o with the help of SPU tool chain
SPU_CROSS := spu-
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index db5398c0339..0c87bcd2452 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -28,6 +28,7 @@
#include <asm/spu.h>
#include <asm/spu_csa.h>
#include "spufs.h"
+#include "sputrace.h"
atomic_t nr_spu_contexts = ATOMIC_INIT(0);
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index d6a519e6e1c..ab8aef9bb8e 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -38,6 +38,7 @@
#include <asm/uaccess.h>
#include "spufs.h"
+#include "sputrace.h"
#define SPUFS_MMAP_4K (PAGE_SIZE == 0x1000)
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index f085369301b..bb5b77c66d0 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -47,6 +47,8 @@
#include <asm/spu_csa.h>
#include <asm/spu_priv1.h>
#include "spufs.h"
+#define CREATE_TRACE_POINTS
+#include "sputrace.h"
struct spu_prio_array {
DECLARE_BITMAP(bitmap, MAX_PRIO);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index ae31573bea4..c448bac6551 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -373,9 +373,4 @@ extern void spu_free_lscsa(struct spu_state *csa);
extern void spuctx_switch_state(struct spu_context *ctx,
enum spu_utilization_state new_state);
-#define spu_context_trace(name, ctx, spu) \
- trace_mark(name, "ctx %p spu %p", ctx, spu);
-#define spu_context_nospu_trace(name, ctx) \
- trace_mark(name, "ctx %p", ctx);
-
#endif
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
deleted file mode 100644
index d0b1f3f4d9c..00000000000
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2007 IBM Deutschland Entwicklung GmbH
- * Released under GPL v2.
- *
- * Partially based on net/ipv4/tcp_probe.c.
- *
- * Simple tracing facility for spu contexts.
- */
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/marker.h>
-#include <linux/proc_fs.h>
-#include <linux/wait.h>
-#include <asm/atomic.h>
-#include <asm/uaccess.h>
-#include "spufs.h"
-
-struct spu_probe {
- const char *name;
- const char *format;
- marker_probe_func *probe_func;
-};
-
-struct sputrace {
- ktime_t tstamp;
- int owner_tid; /* owner */
- int curr_tid;
- const char *name;
- int number;
-};
-
-static int bufsize __read_mostly = 16384;
-MODULE_PARM_DESC(bufsize, "Log buffer size (number of records)");
-module_param(bufsize, int, 0);
-
-
-static DEFINE_SPINLOCK(sputrace_lock);
-static DECLARE_WAIT_QUEUE_HEAD(sputrace_wait);
-static ktime_t sputrace_start;
-static unsigned long sputrace_head, sputrace_tail;
-static struct sputrace *sputrace_log;
-static int sputrace_logging;
-
-static int sputrace_used(void)
-{
- return (sputrace_head - sputrace_tail) % bufsize;
-}
-
-static inline int sputrace_avail(void)
-{
- return bufsize - sputrace_used();
-}
-
-static int sputrace_sprint(char *tbuf, int n)
-{
- const struct sputrace *t = sputrace_log + sputrace_tail % bufsize;
- struct timespec tv =
- ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start));
-
- return snprintf(tbuf, n,
- "[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n",
- (unsigned long) tv.tv_sec,
- (unsigned long) tv.tv_nsec,
- t->curr_tid,
- t->name,
- t->owner_tid,
- t->number);
-}
-
-static ssize_t sputrace_read(struct file *file, char __user *buf,
- size_t len, loff_t *ppos)
-{
- int error = 0, cnt = 0;
-
- if (!buf || len < 0)
- return -EINVAL;
-
- while (cnt < len) {
- char tbuf[128];
- int width;
-
- /* If we have data ready to return, don't block waiting
- * for more */
- if (cnt > 0 && sputrace_used() == 0)
- break;
-
- error = wait_event_interruptible(sputrace_wait,
- sputrace_used() > 0);
- if (error)
- break;
-
- spin_lock(&sputrace_lock);
- if (sputrace_head == sputrace_tail) {
- spin_unlock(&sputrace_lock);
- continue;
- }
-
- width = sputrace_sprint(tbuf, sizeof(tbuf));
- if (width < len)
- sputrace_tail = (sputrace_tail + 1) % bufsize;
- spin_unlock(&sputrace_lock);
-
- if (width >= len)
- break;
-
- error = copy_to_user(buf + cnt, tbuf, width);
- if (error)
- break;
- cnt += width;
- }
-
- return cnt == 0 ? error : cnt;
-}
-
-static int sputrace_open(struct inode *inode, struct file *file)
-{
- int rc;
-
- spin_lock(&sputrace_lock);
- if (sputrace_logging) {
- rc = -EBUSY;
- goto out;
- }
-
- sputrace_logging = 1;
- sputrace_head = sputrace_tail = 0;
- sputrace_start = ktime_get();
- rc = 0;
-
-out:
- spin_unlock(&sputrace_lock);
- return rc;
-}
-
-static int sputrace_release(struct inode *inode, struct file *file)
-{
- spin_lock(&sputrace_lock);
- sputrace_logging = 0;
- spin_unlock(&sputrace_lock);
- return 0;
-}
-
-static const struct file_operations sputrace_fops = {
- .owner = THIS_MODULE,
- .open = sputrace_open,
- .read = sputrace_read,
- .release = sputrace_release,
-};
-
-static void sputrace_log_item(const char *name, struct spu_context *ctx,
- struct spu *spu)
-{
- spin_lock(&sputrace_lock);
-
- if (!sputrace_logging) {
- spin_unlock(&sputrace_lock);
- return;
- }
-
- if (sputrace_avail() > 1) {
- struct sputrace *t = sputrace_log + sputrace_head;
-
- t->tstamp = ktime_get();
- t->owner_tid = ctx->tid;
- t->name = name;
- t->curr_tid = current->pid;
- t->number = spu ? spu->number : -1;
-
- sputrace_head = (sputrace_head + 1) % bufsize;
- } else {
- printk(KERN_WARNING
- "sputrace: lost samples due to full buffer.\n");
- }
- spin_unlock(&sputrace_lock);
-
- wake_up(&sputrace_wait);
-}
-
-static void spu_context_event(void *probe_private, void *call_data,
- const char *format, va_list *args)
-{
- struct spu_probe *p = probe_private;
- struct spu_context *ctx;
- struct spu *spu;
-
- ctx = va_arg(*args, struct spu_context *);
- spu = va_arg(*args, struct spu *);
-
- sputrace_log_item(p->name, ctx, spu);
-}
-
-static void spu_context_nospu_event(void *probe_private, void *call_data,
- const char *format, va_list *args)
-{
- struct spu_probe *p = probe_private;
- struct spu_context *ctx;
-
- ctx = va_arg(*args, struct spu_context *);
-
- sputrace_log_item(p->name, ctx, NULL);
-}
-
-struct spu_probe spu_probes[] = {
- { "spu_bind_context__enter", "ctx %p spu %p", spu_context_event },
- { "spu_unbind_context__enter", "ctx %p spu %p", spu_context_event },
- { "spu_get_idle__enter", "ctx %p", spu_context_nospu_event },
- { "spu_get_idle__found", "ctx %p spu %p", spu_context_event },
- { "spu_get_idle__not_found", "ctx %p", spu_context_nospu_event },
- { "spu_find_victim__enter", "ctx %p", spu_context_nospu_event },
- { "spusched_tick__preempt", "ctx %p spu %p", spu_context_event },
- { "spusched_tick__newslice", "ctx %p", spu_context_nospu_event },
- { "spu_yield__enter", "ctx %p", spu_context_nospu_event },
- { "spu_deactivate__enter", "ctx %p", spu_context_nospu_event },
- { "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event },
- { "spufs_ps_fault__enter", "ctx %p", spu_context_nospu_event },
- { "spufs_ps_fault__sleep", "ctx %p", spu_context_nospu_event },
- { "spufs_ps_fault__wake", "ctx %p spu %p", spu_context_event },
- { "spufs_ps_fault__insert", "ctx %p spu %p", spu_context_event },
- { "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event },
- { "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event },
- { "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event },
-};
-
-static int __init sputrace_init(void)
-{
- struct proc_dir_entry *entry;
- int i, error = -ENOMEM;
-
- sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL);
- if (!sputrace_log)
- goto out;
-
- entry = proc_create("sputrace", S_IRUSR, NULL, &sputrace_fops);
- if (!entry)
- goto out_free_log;
-
- for (i = 0; i < ARRAY_SIZE(spu_probes); i++) {
- struct spu_probe *p = &spu_probes[i];
-
- error = marker_probe_register(p->name, p->format,
- p->probe_func, p);
- if (error)
- printk(KERN_INFO "Unable to register probe %s\n",
- p->name);
- }
-
- return 0;
-
-out_free_log:
- kfree(sputrace_log);
-out:
- return -ENOMEM;
-}
-
-static void __exit sputrace_exit(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spu_probes); i++)
- marker_probe_unregister(spu_probes[i].name,
- spu_probes[i].probe_func, &spu_probes[i]);
-
- remove_proc_entry("sputrace", NULL);
- kfree(sputrace_log);
- marker_synchronize_unregister();
-}
-
-module_init(sputrace_init);
-module_exit(sputrace_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.h b/arch/powerpc/platforms/cell/spufs/sputrace.h
new file mode 100644
index 00000000000..db2656aa410
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.h
@@ -0,0 +1,39 @@
+#if !defined(_TRACE_SPUFS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SPUFS_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM spufs
+
+TRACE_EVENT(spufs_context,
+ TP_PROTO(struct spu_context *ctx, struct spu *spu, const char *name),
+ TP_ARGS(ctx, spu, name),
+
+ TP_STRUCT__entry(
+ __field(const char *, name)
+ __field(int, owner_tid)
+ __field(int, number)
+ ),
+
+ TP_fast_assign(
+ __entry->name = name;
+ __entry->owner_tid = ctx->tid;
+ __entry->number = spu ? spu->number : -1;
+ ),
+
+ TP_printk("%s (ctxthread = %d, spu = %d)",
+ __entry->name, __entry->owner_tid, __entry->number)
+);
+
+#define spu_context_trace(name, ctx, spu) \
+ trace_spufs_context(ctx, spu, __stringify(name))
+#define spu_context_nospu_trace(name, ctx) \
+ trace_spufs_context(ctx, NULL, __stringify(name))
+
+#endif /* _TRACE_SPUFS_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE sputrace
+#include <trace/define_trace.h>
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 2f581521eb9..5369653dcf6 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -47,7 +47,7 @@ system_reset_iSeries:
LOAD_REG_ADDR(r13, paca)
mulli r0,r23,PACA_SIZE
add r13,r13,r0
- mtspr SPRN_SPRG3,r13 /* Save it away for the future */
+ mtspr SPRN_SPRG_PACA,r13 /* Save it away for the future */
mfmsr r24
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
@@ -116,7 +116,7 @@ iSeries_secondary_smp_loop:
#endif /* CONFIG_SMP */
li r0,-1 /* r0=-1 indicates a Hypervisor call */
sc /* Invoke the hypervisor via a system call */
- mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */
+ mfspr r13,SPRN_SPRG_PACA /* Put r13 back ???? */
b 2b /* If SMP not configured, secondaries
* loop forever */
@@ -126,34 +126,45 @@ iSeries_secondary_smp_loop:
.globl data_access_iSeries
data_access_iSeries:
- mtspr SPRN_SPRG1,r13
+ mtspr SPRN_SPRG_SCRATCH0,r13
BEGIN_FTR_SECTION
- mtspr SPRN_SPRG2,r12
- mfspr r13,SPRN_DAR
- mfspr r12,SPRN_DSISR
- srdi r13,r13,60
- rlwimi r13,r12,16,0x20
- mfcr r12
- cmpwi r13,0x2c
+ mfspr r13,SPRN_SPRG_PACA
+ std r9,PACA_EXSLB+EX_R9(r13)
+ std r10,PACA_EXSLB+EX_R10(r13)
+ mfspr r10,SPRN_DAR
+ mfspr r9,SPRN_DSISR
+ srdi r10,r10,60
+ rlwimi r10,r9,16,0x20
+ mfcr r9
+ cmpwi r10,0x2c
beq .do_stab_bolted_iSeries
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R11(r13)
+ ld r11,PACA_EXSLB+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R12(r13)
+ mfspr r12,SPRN_SPRG_SCRATCH0
+ std r10,PACA_EXGEN+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R13(r13)
+ EXCEPTION_PROLOG_ISERIES_1
+FTR_SECTION_ELSE
EXCEPTION_PROLOG_1(PACA_EXGEN)
EXCEPTION_PROLOG_ISERIES_1
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
b data_access_common
.do_stab_bolted_iSeries:
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
- EXCEPTION_PROLOG_1(PACA_EXSLB)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ mfspr r10,SPRN_SPRG_SCRATCH0
+ std r10,PACA_EXSLB+EX_R13(r13)
EXCEPTION_PROLOG_ISERIES_1
b .do_stab_bolted
.globl data_access_slb_iSeries
data_access_slb_iSeries:
- mtspr SPRN_SPRG1,r13 /* save r13 */
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
+ mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_DAR
std r9,PACA_EXSLB+EX_R9(r13)
@@ -165,7 +176,7 @@ data_access_slb_iSeries:
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
+ mfspr r10,SPRN_SPRG_SCRATCH0
std r10,PACA_EXSLB+EX_R13(r13)
ld r12,PACALPPACAPTR(r13)
ld r12,LPPACASRR1(r12)
@@ -175,8 +186,8 @@ data_access_slb_iSeries:
.globl instruction_access_slb_iSeries
instruction_access_slb_iSeries:
- mtspr SPRN_SPRG1,r13 /* save r13 */
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
+ mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
ld r3,PACALPPACAPTR(r13)
ld r3,LPPACASRR0(r3) /* get SRR0 value */
@@ -189,7 +200,7 @@ instruction_access_slb_iSeries:
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
+ mfspr r10,SPRN_SPRG_SCRATCH0
std r10,PACA_EXSLB+EX_R13(r13)
ld r12,PACALPPACAPTR(r13)
ld r12,LPPACASRR1(r12)
@@ -200,7 +211,7 @@ slb_miss_user_iseries:
std r10,PACA_EXGEN+EX_R10(r13)
std r11,PACA_EXGEN+EX_R11(r13)
std r12,PACA_EXGEN+EX_R12(r13)
- mfspr r10,SPRG1
+ mfspr r10,SPRG_SCRATCH0
ld r11,PACA_EXSLB+EX_R9(r13)
ld r12,PACA_EXSLB+EX_R3(r13)
std r10,PACA_EXGEN+EX_R13(r13)
@@ -221,7 +232,7 @@ slb_miss_user_iseries:
.globl system_call_iSeries
system_call_iSeries:
mr r9,r13
- mfspr r13,SPRN_SPRG3
+ mfspr r13,SPRN_SPRG_PACA
EXCEPTION_PROLOG_ISERIES_1
b system_call_common
diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h
index ced45a8fa1a..bae3fba5ad8 100644
--- a/arch/powerpc/platforms/iseries/exception.h
+++ b/arch/powerpc/platforms/iseries/exception.h
@@ -24,7 +24,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-#include <asm/exception.h>
+#include <asm/exception-64s.h>
#define EXCEPTION_PROLOG_ISERIES_1 \
mfmsr r10; \
@@ -38,7 +38,7 @@
.globl label##_iSeries; \
label##_iSeries: \
HMT_MEDIUM; \
- mtspr SPRN_SPRG1,r13; /* save r13 */ \
+ mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
EXCEPTION_PROLOG_1(area); \
EXCEPTION_PROLOG_ISERIES_1; \
b label##_common
@@ -47,7 +47,7 @@ label##_iSeries: \
.globl label##_iSeries; \
label##_iSeries: \
HMT_MEDIUM; \
- mtspr SPRN_SPRG1,r13; /* save r13 */ \
+ mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
EXCEPTION_PROLOG_1(PACA_EXGEN); \
lbz r10,PACASOFTIRQEN(r13); \
cmpwi 0,r10,0; \
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index fef4d515051..0d9343df35b 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -872,7 +872,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off,
count = 256 - off;
dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE);
- if (dma_mapping_error(NULL, dma_addr))
+ if (dma_addr == DMA_ERROR_CODE)
return -ENOMEM;
memset(page, 0, off + count);
memset(&vsp_cmd, 0, sizeof(vsp_cmd));
diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c
index 43911d8b020..75b296bc51a 100644
--- a/arch/powerpc/platforms/pasemi/idle.c
+++ b/arch/powerpc/platforms/pasemi/idle.c
@@ -90,7 +90,7 @@ machine_late_initcall(pasemi, pasemi_idle_init);
static int __init idle_param(char *p)
{
int i;
- for (i = 0; i < sizeof(modes)/sizeof(struct sleep_mode); i++) {
+ for (i = 0; i < ARRAY_SIZE(modes); i++) {
if (!strcmp(modes[i].name, p)) {
current_mode = i;
break;
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 65c585b8b00..08d94e4cedd 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -44,14 +44,6 @@
*/
#undef DEBUG_FREQ
-/*
- * There is a problem with the core cpufreq code on SMP kernels,
- * it won't recalculate the Bogomips properly
- */
-#ifdef CONFIG_SMP
-#warning "WARNING, CPUFREQ not recommended on SMP kernels"
-#endif
-
extern void low_choose_7447a_dfs(int dfs);
extern void low_choose_750fx_pll(int pll);
extern void low_sleep_handler(void);
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index e6c0040ee79..fbc9bbd74db 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2419,13 +2419,13 @@ static int __init probe_motherboard(void)
dt = of_find_node_by_name(NULL, "device-tree");
if (dt != NULL)
model = of_get_property(dt, "model", NULL);
- for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+ for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) {
if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
pmac_mb = pmac_mb_defs[i];
goto found;
}
}
- for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+ for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
pmac_mb = pmac_mb_defs[i];
goto found;
@@ -2589,9 +2589,16 @@ static void __init probe_uninorth(void)
if (address == 0)
return;
uninorth_base = ioremap(address, 0x40000);
+ if (uninorth_base == NULL)
+ return;
uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
- if (uninorth_maj == 3 || uninorth_maj == 4)
+ if (uninorth_maj == 3 || uninorth_maj == 4) {
u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+ if (u3_ht_base == NULL) {
+ iounmap(uninorth_base);
+ return;
+ }
+ }
printk(KERN_INFO "Found %s memory controller & host bridge"
" @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 04cdd32624d..e81403b245b 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1286,3 +1286,64 @@ static void fixup_k2_sata(struct pci_dev* dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata);
+/*
+ * On U4 (aka CPC945) the PCIe root complex "P2P" bridge resource ranges aren't
+ * configured by the firmware. The bridge itself seems to ignore them but it
+ * causes problems with Linux which then re-assigns devices below the bridge,
+ * thus changing addresses of those devices from what was in the device-tree,
+ * which sucks when those are video cards using offb
+ *
+ * We could just mark it transparent but I prefer fixing up the resources to
+ * properly show what's going on here, as I have some doubts about having them
+ * badly configured potentially being an issue for DMA.
+ *
+ * We leave PIO alone, it seems to be fine
+ *
+ * Oh and there's another funny bug. The OF properties advertize the region
+ * 0xf1000000..0xf1ffffff as being forwarded as memory space. But that's
+ * actually not true, this region is the memory mapped config space. So we
+ * also need to filter it out or we'll map things in the wrong place.
+ */
+static void fixup_u4_pcie(struct pci_dev* dev)
+{
+ struct pci_controller *host = pci_bus_to_host(dev->bus);
+ struct resource *region = NULL;
+ u32 reg;
+ int i;
+
+ /* Only do that on PowerMac */
+ if (!machine_is(powermac))
+ return;
+
+ /* Find the largest MMIO region */
+ for (i = 0; i < 3; i++) {
+ struct resource *r = &host->mem_resources[i];
+ if (!(r->flags & IORESOURCE_MEM))
+ continue;
+ /* Skip the 0xf0xxxxxx..f2xxxxxx regions, we know they
+ * are reserved by HW for other things
+ */
+ if (r->start >= 0xf0000000 && r->start < 0xf3000000)
+ continue;
+ if (!region || (r->end - r->start) >
+ (region->end - region->start))
+ region = r;
+ }
+ /* Nothing found, bail */
+ if (region == 0)
+ return;
+
+ /* Print things out */
+ printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region);
+
+ /* Fixup bridge config space. We know it's a Mac, resource aren't
+ * offset so let's just blast them as-is. We also know that they
+ * fit in 32 bits
+ */
+ reg = ((region->start >> 16) & 0xfff0) | (region->end & 0xfff00000);
+ pci_write_config_dword(dev, PCI_MEMORY_BASE, reg);
+ pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0);
+ pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0);
+ pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie);
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 6d4da7b46b4..937a38e7317 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -408,7 +408,7 @@ static void __init smp_psurge_setup_cpu(int cpu_nr)
/* reset the entry point so if we get another intr we won't
* try to startup again */
out_be32(psurge_start, 0x100);
- if (setup_irq(30, &psurge_irqaction))
+ if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction))
printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 846eb8b57fd..189a25b8073 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -23,8 +23,8 @@
#include <linux/memory_hotplug.h>
#include <linux/lmb.h>
+#include <asm/cell-regs.h>
#include <asm/firmware.h>
-#include <asm/iommu.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 3f763c5284a..e34b305a7a5 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -27,7 +27,7 @@
#include <asm/udbg.h>
#include <asm/lv1call.h>
#include <asm/firmware.h>
-#include <asm/iommu.h>
+#include <asm/cell-regs.h>
#include "platform.h"
@@ -694,7 +694,7 @@ static int ps3_dma_supported(struct device *_dev, u64 mask)
return mask >= DMA_BIT_MASK(32);
}
-static struct dma_mapping_ops ps3_sb_dma_ops = {
+static struct dma_map_ops ps3_sb_dma_ops = {
.alloc_coherent = ps3_alloc_coherent,
.free_coherent = ps3_free_coherent,
.map_sg = ps3_sb_map_sg,
@@ -704,7 +704,7 @@ static struct dma_mapping_ops ps3_sb_dma_ops = {
.unmap_page = ps3_unmap_page,
};
-static struct dma_mapping_ops ps3_ioc0_dma_ops = {
+static struct dma_map_ops ps3_ioc0_dma_ops = {
.alloc_coherent = ps3_alloc_coherent,
.free_coherent = ps3_free_coherent,
.map_sg = ps3_ioc0_map_sg,
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index ad152a0e394..b6fa3e4b51b 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -151,7 +151,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
if (dn->child)
eeh_add_device_tree_early(dn);
- scan_phb(phb);
+ pcibios_scan_phb(phb, dn);
pcibios_finish_adding_to_bus(phb->bus);
return phb;
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index b6f1b137d42..2e2bbe120b9 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -20,6 +20,7 @@
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/pSeries_reconfig.h>
+#include <asm/mmu.h>
@@ -439,9 +440,15 @@ static int do_update_property(char *buf, size_t bufsize)
if (!newprop)
return -ENOMEM;
+ if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
+ slb_set_size(*(int *)value);
+
oldprop = of_find_property(np, name,NULL);
- if (!oldprop)
+ if (!oldprop) {
+ if (strlen(name))
+ return prom_add_property(np, newprop);
return -ENODEV;
+ }
rc = prom_update_property(np, newprop, oldprop);
if (rc)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 8d75ea21296..ca5f2e10972 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -223,10 +223,6 @@ static void pseries_lpar_enable_pmcs(void)
set = 1UL << 63;
reset = 0;
plpar_hcall_norets(H_PERFMON, set, reset);
-
- /* instruct hypervisor to maintain PMCs */
- if (firmware_has_feature(FW_FEATURE_SPLPAR))
- get_lppaca()->pmcregs_in_use = 1;
}
static void __init pseries_discover_pic(void)
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1f8f6cfb94f..440000cc713 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -56,8 +56,6 @@
*/
static cpumask_t of_spin_map;
-extern void generic_secondary_smp_init(unsigned long);
-
/**
* smp_startup_cpu() - start the given cpu
*
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index cbb3bed75d3..757a83fe5e5 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1057,6 +1057,10 @@ int fsl_rio_setup(struct of_device *dev)
law_start, law_size);
ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+ if (!ops) {
+ rc = -ENOMEM;
+ goto err_ops;
+ }
ops->lcread = fsl_local_config_read;
ops->lcwrite = fsl_local_config_write;
ops->cread = fsl_rio_config_read;
@@ -1064,6 +1068,10 @@ int fsl_rio_setup(struct of_device *dev)
ops->dsend = fsl_rio_doorbell_send;
port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ if (!port) {
+ rc = -ENOMEM;
+ goto err_port;
+ }
port->id = 0;
port->index = 0;
@@ -1071,7 +1079,7 @@ int fsl_rio_setup(struct of_device *dev)
if (!priv) {
printk(KERN_ERR "Can't alloc memory for 'priv'\n");
rc = -ENOMEM;
- goto err;
+ goto err_priv;
}
INIT_LIST_HEAD(&port->dbells);
@@ -1169,11 +1177,13 @@ int fsl_rio_setup(struct of_device *dev)
return 0;
err:
- if (priv)
- iounmap(priv->regs_win);
- kfree(ops);
+ iounmap(priv->regs_win);
kfree(priv);
+err_priv:
kfree(port);
+err_port:
+ kfree(ops);
+err_ops:
return rc;
}
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 95dbc643c4f..adca4affcf1 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -37,6 +37,7 @@
#include <asm/irq.h>
#include <asm/time.h>
#include <asm/prom.h>
+#include <asm/machdep.h>
#include <sysdev/fsl_soc.h>
#include <mm/mmu_decl.h>
#include <asm/cpm2.h>
@@ -383,8 +384,9 @@ static int __init setup_rstcr(void)
if (!rstcr)
printk (KERN_EMERG "Error: reset control register "
"not mapped!\n");
- } else
- printk (KERN_INFO "rstcr compatible register does not exist!\n");
+ } else if (ppc_md.restart == fsl_rstcr_restart)
+ printk(KERN_ERR "No RSTCR register, warm reboot won't work\n");
+
if (np)
of_node_put(np);
return 0;
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 69e2630c906..cb7689c4bfb 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -735,8 +735,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
NR_IPIC_INTS,
&ipic_host_ops, 0);
- if (ipic->irqhost == NULL)
+ if (ipic->irqhost == NULL) {
+ kfree(ipic);
return NULL;
+ }
ipic->regs = ioremap(res.start, res.end - res.start + 1);
@@ -781,6 +783,9 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
primary_ipic = ipic;
irq_set_default_host(primary_ipic->irqhost);
+ ipic_write(ipic->regs, IPIC_SIMSR_H, 0);
+ ipic_write(ipic->regs, IPIC_SIMSR_L, 0);
+
printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS,
primary_ipic->regs);
diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c
index 7b49633a4bd..20732420906 100644
--- a/arch/powerpc/sysdev/mmio_nvram.c
+++ b/arch/powerpc/sysdev/mmio_nvram.c
@@ -53,6 +53,23 @@ static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index)
return count;
}
+static unsigned char mmio_nvram_read_val(int addr)
+{
+ unsigned long flags;
+ unsigned char val;
+
+ if (addr >= mmio_nvram_len)
+ return 0xff;
+
+ spin_lock_irqsave(&mmio_nvram_lock, flags);
+
+ val = ioread8(mmio_nvram_start + addr);
+
+ spin_unlock_irqrestore(&mmio_nvram_lock, flags);
+
+ return val;
+}
+
static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index)
{
unsigned long flags;
@@ -72,6 +89,19 @@ static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index)
return count;
}
+void mmio_nvram_write_val(int addr, unsigned char val)
+{
+ unsigned long flags;
+
+ if (addr < mmio_nvram_len) {
+ spin_lock_irqsave(&mmio_nvram_lock, flags);
+
+ iowrite8(val, mmio_nvram_start + addr);
+
+ spin_unlock_irqrestore(&mmio_nvram_lock, flags);
+ }
+}
+
static ssize_t mmio_nvram_get_size(void)
{
return mmio_nvram_len;
@@ -114,6 +144,8 @@ int __init mmio_nvram_init(void)
printk(KERN_INFO "mmio NVRAM, %luk at 0x%lx mapped to %p\n",
mmio_nvram_len >> 10, nvram_addr, mmio_nvram_start);
+ ppc_md.nvram_read_val = mmio_nvram_read_val;
+ ppc_md.nvram_write_val = mmio_nvram_write_val;
ppc_md.nvram_read = mmio_nvram_read;
ppc_md.nvram_write = mmio_nvram_write;
ppc_md.nvram_size = mmio_nvram_get_size;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 3981ae4cb58..30c44e6b041 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -230,14 +230,16 @@ static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigne
{
unsigned int isu = src_no >> mpic->isu_shift;
unsigned int idx = src_no & mpic->isu_mask;
+ unsigned int val;
+ val = _mpic_read(mpic->reg_type, &mpic->isus[isu],
+ reg + (idx * MPIC_INFO(IRQ_STRIDE)));
#ifdef CONFIG_MPIC_BROKEN_REGREAD
if (reg == 0)
- return mpic->isu_reg0_shadow[idx];
- else
+ val = (val & (MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY)) |
+ mpic->isu_reg0_shadow[src_no];
#endif
- return _mpic_read(mpic->reg_type, &mpic->isus[isu],
- reg + (idx * MPIC_INFO(IRQ_STRIDE)));
+ return val;
}
static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
@@ -251,7 +253,8 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
#ifdef CONFIG_MPIC_BROKEN_REGREAD
if (reg == 0)
- mpic->isu_reg0_shadow[idx] = value;
+ mpic->isu_reg0_shadow[src_no] =
+ value & ~(MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY);
#endif
}
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index 3485288dce3..8e7a7767dd5 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -105,14 +105,14 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
unsigned long flags;
+ qe_gpio_set(gc, gpio, val);
+
spin_lock_irqsave(&qe_gc->lock, flags);
__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
spin_unlock_irqrestore(&qe_gc->lock, flags);
- qe_gpio_set(gc, gpio, val);
-
return 0;
}
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 074905c3ee5..3faa42e03a8 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -339,8 +339,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
NR_QE_IC_INTS, &qe_ic_host_ops, 0);
- if (qe_ic->irqhost == NULL)
+ if (qe_ic->irqhost == NULL) {
+ kfree(qe_ic);
return;
+ }
qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
@@ -352,6 +354,7 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
if (qe_ic->virq_low == NO_IRQ) {
printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+ kfree(qe_ic);
return;
}
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index 85ab97ab840..faa81b6a661 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -2,6 +2,8 @@
subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+GCOV_PROFILE := n
+
ifdef CONFIG_PPC64
EXTRA_CFLAGS += -mno-minimal-toc
endif
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index e1f33a81e5e..0e09a45ac79 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2570,7 +2570,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
printf("%s", after);
}
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
static void dump_slb(void)
{
int i;
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
index 095f97e6066..c8753a9ed29 100644
--- a/drivers/block/ps3vram.c
+++ b/drivers/block/ps3vram.c
@@ -13,8 +13,8 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <asm/cell-regs.h>
#include <asm/firmware.h>
-#include <asm/iommu.h>
#include <asm/lv1call.h>
#include <asm/ps3.h>
#include <asm/ps3gpu.h>
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 4317a5588da..20ef1bf5e72 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -7,6 +7,7 @@
#include <linux/pagemap.h>
#include <linux/agp_backend.h>
#include <linux/delay.h>
+#include <linux/vmalloc.h>
#include <asm/uninorth.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
@@ -27,6 +28,8 @@
static int uninorth_rev;
static int is_u3;
+#define DEFAULT_APERTURE_SIZE 256
+#define DEFAULT_APERTURE_STRING "256"
static char *aperture = NULL;
static int uninorth_fetch_size(void)
@@ -55,7 +58,7 @@ static int uninorth_fetch_size(void)
if (!size) {
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++)
- if (values[i].size == 32)
+ if (values[i].size == DEFAULT_APERTURE_SIZE)
break;
}
@@ -179,8 +182,6 @@ static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start,
}
(void)in_le32((volatile u32*)&agp_bridge->gatt_table[pg_start]);
mb();
- flush_dcache_range((unsigned long)&agp_bridge->gatt_table[pg_start],
- (unsigned long)&agp_bridge->gatt_table[pg_start + mem->page_count]);
uninorth_tlbflush(mem);
return 0;
@@ -224,7 +225,6 @@ static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
(unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000);
}
mb();
- flush_dcache_range((unsigned long)gp, (unsigned long) &gp[i]);
uninorth_tlbflush(mem);
return 0;
@@ -243,7 +243,6 @@ int u3_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
for (i = 0; i < mem->page_count; ++i)
gp[i] = 0;
mb();
- flush_dcache_range((unsigned long)gp, (unsigned long) &gp[i]);
uninorth_tlbflush(mem);
return 0;
@@ -396,6 +395,7 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
int i;
void *temp;
struct page *page;
+ struct page **pages;
/* We can't handle 2 level gatt's */
if (bridge->driver->size_type == LVL2_APER_SIZE)
@@ -424,21 +424,39 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
if (table == NULL)
return -ENOMEM;
+ pages = kmalloc((1 << page_order) * sizeof(struct page*), GFP_KERNEL);
+ if (pages == NULL)
+ goto enomem;
+
table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
- for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
+ for (page = virt_to_page(table), i = 0; page <= virt_to_page(table_end);
+ page++, i++) {
SetPageReserved(page);
+ pages[i] = page;
+ }
bridge->gatt_table_real = (u32 *) table;
- bridge->gatt_table = (u32 *)table;
+ /* Need to clear out any dirty data still sitting in caches */
+ flush_dcache_range((unsigned long)table,
+ (unsigned long)(table_end + PAGE_SIZE));
+ bridge->gatt_table = vmap(pages, (1 << page_order), 0, PAGE_KERNEL_NCG);
+
+ if (bridge->gatt_table == NULL)
+ goto enomem;
+
bridge->gatt_bus_addr = virt_to_phys(table);
for (i = 0; i < num_entries; i++)
bridge->gatt_table[i] = 0;
- flush_dcache_range((unsigned long)table, (unsigned long)table_end);
-
return 0;
+
+enomem:
+ kfree(pages);
+ if (table)
+ free_pages((unsigned long)table, page_order);
+ return -ENOMEM;
}
static int uninorth_free_gatt_table(struct agp_bridge_data *bridge)
@@ -456,6 +474,7 @@ static int uninorth_free_gatt_table(struct agp_bridge_data *bridge)
* from the table.
*/
+ vunmap(bridge->gatt_table);
table = (char *) bridge->gatt_table_real;
table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
@@ -474,13 +493,11 @@ void null_cache_flush(void)
/* Setup function */
-static const struct aper_size_info_32 uninorth_sizes[7] =
+static const struct aper_size_info_32 uninorth_sizes[] =
{
-#if 0 /* Not sure uninorth supports that high aperture sizes */
{256, 65536, 6, 64},
{128, 32768, 5, 32},
{64, 16384, 4, 16},
-#endif
{32, 8192, 3, 8},
{16, 4096, 2, 4},
{8, 2048, 1, 2},
@@ -491,7 +508,7 @@ static const struct aper_size_info_32 uninorth_sizes[7] =
* Not sure that u3 supports that high aperture sizes but it
* would strange if it did not :)
*/
-static const struct aper_size_info_32 u3_sizes[8] =
+static const struct aper_size_info_32 u3_sizes[] =
{
{512, 131072, 7, 128},
{256, 65536, 6, 64},
@@ -507,7 +524,7 @@ const struct agp_bridge_driver uninorth_agp_driver = {
.owner = THIS_MODULE,
.aperture_sizes = (void *)uninorth_sizes,
.size_type = U32_APER_SIZE,
- .num_aperture_sizes = 4,
+ .num_aperture_sizes = ARRAY_SIZE(uninorth_sizes),
.configure = uninorth_configure,
.fetch_size = uninorth_fetch_size,
.cleanup = uninorth_cleanup,
@@ -534,7 +551,7 @@ const struct agp_bridge_driver u3_agp_driver = {
.owner = THIS_MODULE,
.aperture_sizes = (void *)u3_sizes,
.size_type = U32_APER_SIZE,
- .num_aperture_sizes = 8,
+ .num_aperture_sizes = ARRAY_SIZE(u3_sizes),
.configure = uninorth_configure,
.fetch_size = uninorth_fetch_size,
.cleanup = uninorth_cleanup,
@@ -717,7 +734,7 @@ module_param(aperture, charp, 0);
MODULE_PARM_DESC(aperture,
"Aperture size, must be power of two between 4MB and an\n"
"\t\tupper limit specific to the UniNorth revision.\n"
- "\t\tDefault: 32M");
+ "\t\tDefault: " DEFAULT_APERTURE_STRING "M");
MODULE_AUTHOR("Ben Herrenschmidt & Paul Mackerras");
MODULE_LICENSE("GPL");
diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c
index a00869c650d..ef31738c2cb 100644
--- a/drivers/char/generic_nvram.c
+++ b/drivers/char/generic_nvram.c
@@ -2,7 +2,7 @@
* Generic /dev/nvram driver for architectures providing some
* "generic" hooks, that is :
*
- * nvram_read_byte, nvram_write_byte, nvram_sync
+ * nvram_read_byte, nvram_write_byte, nvram_sync, nvram_get_size
*
* Note that an additional hook is supported for PowerMac only
* for getting the nvram "partition" informations
@@ -28,6 +28,8 @@
#define NVRAM_SIZE 8192
+static ssize_t nvram_len;
+
static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
{
lock_kernel();
@@ -36,7 +38,7 @@ static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
offset += file->f_pos;
break;
case 2:
- offset += NVRAM_SIZE;
+ offset += nvram_len;
break;
}
if (offset < 0) {
@@ -56,9 +58,9 @@ static ssize_t read_nvram(struct file *file, char __user *buf,
if (!access_ok(VERIFY_WRITE, buf, count))
return -EFAULT;
- if (*ppos >= NVRAM_SIZE)
+ if (*ppos >= nvram_len)
return 0;
- for (i = *ppos; count > 0 && i < NVRAM_SIZE; ++i, ++p, --count)
+ for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count)
if (__put_user(nvram_read_byte(i), p))
return -EFAULT;
*ppos = i;
@@ -74,9 +76,9 @@ static ssize_t write_nvram(struct file *file, const char __user *buf,
if (!access_ok(VERIFY_READ, buf, count))
return -EFAULT;
- if (*ppos >= NVRAM_SIZE)
+ if (*ppos >= nvram_len)
return 0;
- for (i = *ppos; count > 0 && i < NVRAM_SIZE; ++i, ++p, --count) {
+ for (i = *ppos; count > 0 && i < nvram_len; ++i, ++p, --count) {
if (__get_user(c, p))
return -EFAULT;
nvram_write_byte(c, i);
@@ -133,9 +135,20 @@ static struct miscdevice nvram_dev = {
int __init nvram_init(void)
{
+ int ret = 0;
+
printk(KERN_INFO "Generic non-volatile memory driver v%s\n",
NVRAM_VERSION);
- return misc_register(&nvram_dev);
+ ret = misc_register(&nvram_dev);
+ if (ret != 0)
+ goto out;
+
+ nvram_len = nvram_get_size();
+ if (nvram_len < 0)
+ nvram_len = NVRAM_SIZE;
+
+out:
+ return ret;
}
void __exit nvram_cleanup(void)
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index d97779ef72c..25ce15bb1c0 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -516,8 +516,6 @@ static void hvc_set_winsz(struct work_struct *work)
struct winsize ws;
hp = container_of(work, struct hvc_struct, tty_resize);
- if (!hp)
- return;
spin_lock_irqsave(&hp->lock, hvc_flags);
if (!hp->tty) {
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index c72b994652a..10be343d6ae 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -120,7 +120,7 @@ static struct vio_driver hvc_vio_driver = {
}
};
-static int hvc_vio_init(void)
+static int __init hvc_vio_init(void)
{
int rc;
@@ -134,7 +134,7 @@ static int hvc_vio_init(void)
}
module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */
-static void hvc_vio_exit(void)
+static void __exit hvc_vio_exit(void)
{
vio_unregister_driver(&hvc_vio_driver);
}
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index 2989056a9e3..793b236c926 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -1230,11 +1230,12 @@ static struct tty_driver *hvsi_console_device(struct console *console,
static int __init hvsi_console_setup(struct console *console, char *options)
{
- struct hvsi_struct *hp = &hvsi_ports[console->index];
+ struct hvsi_struct *hp;
int ret;
if (console->index < 0 || console->index >= hvsi_count)
return -1;
+ hp = &hvsi_ports[console->index];
/* give the FSP a chance to change the baud rate when we re-open */
hvsi_close_protocol(hp);
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index a0f68386c12..588a5b0bc4b 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -294,10 +294,11 @@ static void macio_setup_interrupts(struct macio_dev *dev)
int i = 0, j = 0;
for (;;) {
- struct resource *res = &dev->interrupt[j];
+ struct resource *res;
if (j >= MACIO_DEV_COUNT_IRQS)
break;
+ res = &dev->interrupt[j];
irq = irq_of_parse_and_map(np, i++);
if (irq == NO_IRQ)
break;
@@ -321,9 +322,10 @@ static void macio_setup_resources(struct macio_dev *dev,
int index;
for (index = 0; of_address_to_resource(np, index, &r) == 0; index++) {
- struct resource *res = &dev->resource[index];
+ struct resource *res;
if (index >= MACIO_DEV_COUNT_RESOURCES)
break;
+ res = &dev->resource[index];
*res = r;
res->name = dev_name(&dev->ofdev.dev);
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 40023313a76..8b9364434aa 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -239,8 +239,8 @@ setup_hardware( void )
* to be on the safe side (OSX doesn't)...
*/
if( x.overheat_temp == (80 << 8) ) {
- x.overheat_temp = 65 << 8;
- x.overheat_hyst = 60 << 8;
+ x.overheat_temp = 75 << 8;
+ x.overheat_hyst = 70 << 8;
write_reg( x.thermostat, 2, x.overheat_hyst, 2 );
write_reg( x.thermostat, 3, x.overheat_temp, 2 );
diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c
index 18066d55539..af0afa1db4a 100644
--- a/drivers/ps3/ps3stor_lib.c
+++ b/drivers/ps3/ps3stor_lib.c
@@ -23,6 +23,65 @@
#include <asm/lv1call.h>
#include <asm/ps3stor.h>
+/*
+ * A workaround for flash memory I/O errors when the internal hard disk
+ * has not been formatted for OtherOS use. Delay disk close until flash
+ * memory is closed.
+ */
+
+static struct ps3_flash_workaround {
+ int flash_open;
+ int disk_open;
+ struct ps3_system_bus_device *disk_sbd;
+} ps3_flash_workaround;
+
+static int ps3stor_open_hv_device(struct ps3_system_bus_device *sbd)
+{
+ int error = ps3_open_hv_device(sbd);
+
+ if (error)
+ return error;
+
+ if (sbd->match_id == PS3_MATCH_ID_STOR_FLASH)
+ ps3_flash_workaround.flash_open = 1;
+
+ if (sbd->match_id == PS3_MATCH_ID_STOR_DISK)
+ ps3_flash_workaround.disk_open = 1;
+
+ return 0;
+}
+
+static int ps3stor_close_hv_device(struct ps3_system_bus_device *sbd)
+{
+ int error;
+
+ if (sbd->match_id == PS3_MATCH_ID_STOR_DISK
+ && ps3_flash_workaround.disk_open
+ && ps3_flash_workaround.flash_open) {
+ ps3_flash_workaround.disk_sbd = sbd;
+ return 0;
+ }
+
+ error = ps3_close_hv_device(sbd);
+
+ if (error)
+ return error;
+
+ if (sbd->match_id == PS3_MATCH_ID_STOR_DISK)
+ ps3_flash_workaround.disk_open = 0;
+
+ if (sbd->match_id == PS3_MATCH_ID_STOR_FLASH) {
+ ps3_flash_workaround.flash_open = 0;
+
+ if (ps3_flash_workaround.disk_sbd) {
+ ps3_close_hv_device(ps3_flash_workaround.disk_sbd);
+ ps3_flash_workaround.disk_open = 0;
+ ps3_flash_workaround.disk_sbd = NULL;
+ }
+ }
+
+ return 0;
+}
static int ps3stor_probe_access(struct ps3_storage_device *dev)
{
@@ -90,7 +149,7 @@ int ps3stor_setup(struct ps3_storage_device *dev, irq_handler_t handler)
int error, res, alignment;
enum ps3_dma_page_size page_size;
- error = ps3_open_hv_device(&dev->sbd);
+ error = ps3stor_open_hv_device(&dev->sbd);
if (error) {
dev_err(&dev->sbd.core,
"%s:%u: ps3_open_hv_device failed %d\n", __func__,
@@ -166,7 +225,7 @@ fail_free_irq:
fail_sb_event_receive_port_destroy:
ps3_sb_event_receive_port_destroy(&dev->sbd, dev->irq);
fail_close_device:
- ps3_close_hv_device(&dev->sbd);
+ ps3stor_close_hv_device(&dev->sbd);
fail:
return error;
}
@@ -193,7 +252,7 @@ void ps3stor_teardown(struct ps3_storage_device *dev)
"%s:%u: destroy event receive port failed %d\n",
__func__, __LINE__, error);
- error = ps3_close_hv_device(&dev->sbd);
+ error = ps3stor_close_hv_device(&dev->sbd);
if (error)
dev_err(&dev->sbd.core,
"%s:%u: ps3_close_hv_device failed %d\n", __func__,
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index c0af638fe70..9c0144ee7ae 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -32,7 +32,7 @@
#include <linux/init.h>
#include <asm/abs_addr.h>
-#include <asm/iommu.h>
+#include <asm/cell-regs.h>
#include <asm/lv1call.h>
#include <asm/ps3av.h>
#include <asm/ps3fb.h>
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index c0f6c3cd788..91b76184606 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -58,6 +58,7 @@ struct dma_map_ops {
enum dma_data_direction dir);
int (*mapping_error)(struct device *dev, dma_addr_t dma_addr);
int (*dma_supported)(struct device *dev, u64 mask);
+ int (*set_dma_mask)(struct device *dev, u64 mask);
int is_phys;
};
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 555a8262fbc..0d96be93b92 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -881,6 +881,7 @@
#define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051
#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058
#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059
+#define PCI_DEVICE_ID_APPLE_U4_PCIE 0x005b
#define PCI_DEVICE_ID_APPLE_IPID2_AGP 0x0066
#define PCI_DEVICE_ID_APPLE_IPID2_ATA 0x0069
#define PCI_DEVICE_ID_APPLE_IPID2_FW 0x006a
diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
index 22e9dcfaa3d..654efd09f6a 100644
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -34,7 +34,7 @@ config GCOV_KERNEL
config GCOV_PROFILE_ALL
bool "Profile entire Kernel"
depends on GCOV_KERNEL
- depends on S390 || X86
+ depends on S390 || X86 || (PPC && EXPERIMENTAL)
default n
---help---
This options activates profiling for the entire kernel.
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 55d2acc607a..d57b12f59c8 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -338,7 +338,7 @@ config SLUB_STATS
config DEBUG_KMEMLEAK
bool "Kernel memory leak detector"
- depends on DEBUG_KERNEL && EXPERIMENTAL && (X86 || ARM) && \
+ depends on DEBUG_KERNEL && EXPERIMENTAL && (X86 || ARM || PPC) && \
!MEMORY_HOTPLUG
select DEBUG_FS if SYSFS
select STACKTRACE if STACKTRACE_SUPPORT