ENGR00133551-1 Add freescale usb udc support for i.mx51 platform.

Add imx_udc for usb gadget on i.mx51 platform.

Signed-off-by: Hu Hui <b29976@freescale.com>
Signed-off-by: Sammy He <r62914@freescale.com>

3 files changed, 427 insertions, 1 deletions

diff --git a/include/asm-arm/arch-mx51/mx51.h b/include/asm-arm/arch-mx51/mx51.h
index d06abacf3..1f23232e3 100644
--- a/include/asm-arm/arch-mx51/mx51.h
+++ b/include/asm-arm/arch-mx51/mx51.h
@@ -493,6 +493,10 @@ extern unsigned int mxc_get_clock(enum mxc_clock clk);
 extern unsigned int get_board_rev(void);
 extern int is_soc_rev(int rev);
 extern enum boot_device get_boot_device(void);
+extern void set_usboh3_clk(void);
+extern void set_usb_phy1_clk(void);
+extern void enable_usboh3_clk(unsigned char enable);
+extern void enable_usb_phy1_clk(unsigned char enable);
 
 #endif /* __ASSEMBLER__*/
 
diff --git a/include/usb/imx_udc.h b/include/usb/imx_udc.h
new file mode 100644
index 000000000..bbc18cb13
--- /dev/null
+++ b/include/usb/imx_udc.h
@@ -0,0 +1,420 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _IMX_UDC_H_
+#define _IMX_UDC_H_
+
+#define AIPS1_BASE_ADDR		0x73F00000
+
+#define OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00080000)
+
+#define USB_ID               (OTG_BASE_ADDR + 0x0000)
+#define USB_HWGENERAL        (OTG_BASE_ADDR + 0x0004)
+#define USB_HWHOST           (OTG_BASE_ADDR + 0x0008)
+#define USB_HWDEVICE         (OTG_BASE_ADDR + 0x000C)
+#define USB_HWTXBUF          (OTG_BASE_ADDR + 0x0010)
+#define USB_HWRXBUF          (OTG_BASE_ADDR + 0x0014)
+#define USB_SBUSCFG          (OTG_BASE_ADDR + 0x0090)
+
+#define USB_CAPLENGTH        (OTG_BASE_ADDR + 0x0100) /* 8 bit */
+#define USB_HCIVERSION       (OTG_BASE_ADDR + 0x0102) /* 16 bit */
+#define USB_HCSPARAMS        (OTG_BASE_ADDR + 0x0104)
+#define USB_HCCPARAMS        (OTG_BASE_ADDR + 0x0108)
+#define USB_DCIVERSION       (OTG_BASE_ADDR + 0x0120) /* 16 bit */
+#define USB_DCCPARAMS        (OTG_BASE_ADDR + 0x0124)
+#define USB_USBCMD           (OTG_BASE_ADDR + 0x0140)
+#define USB_USBSTS           (OTG_BASE_ADDR + 0x0144)
+#define USB_USBINTR          (OTG_BASE_ADDR + 0x0148)
+#define USB_FRINDEX          (OTG_BASE_ADDR + 0x014C)
+#define USB_DEVICEADDR       (OTG_BASE_ADDR + 0x0154)
+#define USB_ENDPOINTLISTADDR (OTG_BASE_ADDR + 0x0158)
+#define USB_BURSTSIZE        (OTG_BASE_ADDR + 0x0160)
+#define USB_TXFILLTUNING     (OTG_BASE_ADDR + 0x0164)
+#define USB_ULPI_VIEWPORT    (OTG_BASE_ADDR + 0x0170)
+#define USB_ENDPTNAK         (OTG_BASE_ADDR + 0x0178)
+#define USB_ENDPTNAKEN       (OTG_BASE_ADDR + 0x017C)
+#define USB_PORTSC           (OTG_BASE_ADDR + 0x0184)
+#define USB_OTGSC            (OTG_BASE_ADDR + 0x01A4)
+#define USB_USBMODE          (OTG_BASE_ADDR + 0x01A8)
+#define USB_ENDPTSETUPSTAT   (OTG_BASE_ADDR + 0x01AC)
+#define USB_ENDPTPRIME       (OTG_BASE_ADDR + 0x01B0)
+#define USB_ENDPTFLUSH       (OTG_BASE_ADDR + 0x01B4)
+#define USB_ENDPTSTAT        (OTG_BASE_ADDR + 0x01B8)
+#define USB_ENDPTCOMPLETE    (OTG_BASE_ADDR + 0x01BC)
+#define USB_ENDPTCTRL(n)     (OTG_BASE_ADDR + 0x01C0 + (4 * (n)))
+
+#define USB_PHY1_CTRL        (OTG_BASE_ADDR + 0x80C)
+#define USBCMD_RESET   2
+#define USBCMD_ATTACH  1
+
+#define USBMODE_DEVICE 2
+#define USBMODE_HOST   3
+
+struct ep_queue_head {
+	volatile unsigned int config;
+	volatile unsigned int current; /* read-only */
+
+	volatile unsigned int next_queue_item;
+	volatile unsigned int info;
+	volatile unsigned int page0;
+	volatile unsigned int page1;
+	volatile unsigned int page2;
+	volatile unsigned int page3;
+	volatile unsigned int page4;
+	volatile unsigned int reserved_0;
+
+	volatile unsigned char setup_data[8];
+	volatile unsigned int reserved[4];
+};
+
+#define CONFIG_MAX_PKT(n)     ((n) << 16)
+#define CONFIG_ZLT            (1 << 29)    /* stop on zero-len xfer */
+#define CONFIG_IOS            (1 << 15)    /* IRQ on setup */
+
+struct ep_queue_item {
+	volatile unsigned int next_item_ptr;
+	volatile unsigned int info;
+	volatile unsigned int page0;
+	volatile unsigned int page1;
+	volatile unsigned int page2;
+	volatile unsigned int page3;
+	volatile unsigned int page4;
+	unsigned int item_dma;
+	unsigned int page_vir;
+	unsigned int page_dma;
+	struct ep_queue_item *next_item_vir;
+	volatile unsigned int reserved[5];
+};
+
+#define TERMINATE 1
+
+#define INFO_BYTES(n)         ((n) << 16)
+#define INFO_IOC              (1 << 15)
+#define INFO_ACTIVE           (1 << 7)
+#define INFO_HALTED           (1 << 6)
+#define INFO_BUFFER_ERROR     (1 << 5)
+#define INFO_TX_ERROR         (1 << 3)
+
+/* Device Controller Capability Parameter register */
+#define DCCPARAMS_DC				0x00000080
+#define DCCPARAMS_DEN_MASK			0x0000001f
+
+/* Frame Index Register Bit Masks */
+#define	USB_FRINDEX_MASKS			(0x3fff)
+/* USB CMD  Register Bit Masks */
+#define  USB_CMD_RUN_STOP                     (0x00000001)
+#define  USB_CMD_CTRL_RESET                   (0x00000002)
+#define  USB_CMD_PERIODIC_SCHEDULE_EN         (0x00000010)
+#define  USB_CMD_ASYNC_SCHEDULE_EN            (0x00000020)
+#define  USB_CMD_INT_AA_DOORBELL              (0x00000040)
+#define  USB_CMD_ASP                          (0x00000300)
+#define  USB_CMD_ASYNC_SCH_PARK_EN            (0x00000800)
+#define  USB_CMD_SUTW                         (0x00002000)
+#define  USB_CMD_ATDTW                        (0x00004000)
+#define  USB_CMD_ITC                          (0x00FF0000)
+
+/* bit 15,3,2 are frame list size */
+#define  USB_CMD_FRAME_SIZE_1024              (0x00000000)
+#define  USB_CMD_FRAME_SIZE_512               (0x00000004)
+#define  USB_CMD_FRAME_SIZE_256               (0x00000008)
+#define  USB_CMD_FRAME_SIZE_128               (0x0000000C)
+#define  USB_CMD_FRAME_SIZE_64                (0x00008000)
+#define  USB_CMD_FRAME_SIZE_32                (0x00008004)
+#define  USB_CMD_FRAME_SIZE_16                (0x00008008)
+#define  USB_CMD_FRAME_SIZE_8                 (0x0000800C)
+
+/* bit 9-8 are async schedule park mode count */
+#define  USB_CMD_ASP_00                       (0x00000000)
+#define  USB_CMD_ASP_01                       (0x00000100)
+#define  USB_CMD_ASP_10                       (0x00000200)
+#define  USB_CMD_ASP_11                       (0x00000300)
+#define  USB_CMD_ASP_BIT_POS                  (8)
+
+/* bit 23-16 are interrupt threshold control */
+#define  USB_CMD_ITC_NO_THRESHOLD             (0x00000000)
+#define  USB_CMD_ITC_1_MICRO_FRM              (0x00010000)
+#define  USB_CMD_ITC_2_MICRO_FRM              (0x00020000)
+#define  USB_CMD_ITC_4_MICRO_FRM              (0x00040000)
+#define  USB_CMD_ITC_8_MICRO_FRM              (0x00080000)
+#define  USB_CMD_ITC_16_MICRO_FRM             (0x00100000)
+#define  USB_CMD_ITC_32_MICRO_FRM             (0x00200000)
+#define  USB_CMD_ITC_64_MICRO_FRM             (0x00400000)
+#define  USB_CMD_ITC_BIT_POS                  (16)
+
+/* USB STS Register Bit Masks */
+#define  USB_STS_INT                          (0x00000001)
+#define  USB_STS_ERR                          (0x00000002)
+#define  USB_STS_PORT_CHANGE                  (0x00000004)
+#define  USB_STS_FRM_LST_ROLL                 (0x00000008)
+#define  USB_STS_SYS_ERR                      (0x00000010)
+#define  USB_STS_IAA                          (0x00000020)
+#define  USB_STS_RESET                        (0x00000040)
+#define  USB_STS_SOF                          (0x00000080)
+#define  USB_STS_SUSPEND                      (0x00000100)
+#define  USB_STS_HC_HALTED                    (0x00001000)
+#define  USB_STS_RCL                          (0x00002000)
+#define  USB_STS_PERIODIC_SCHEDULE            (0x00004000)
+#define  USB_STS_ASYNC_SCHEDULE               (0x00008000)
+
+/* USB INTR Register Bit Masks */
+#define  USB_INTR_INT_EN                      (0x00000001)
+#define  USB_INTR_ERR_INT_EN                  (0x00000002)
+#define  USB_INTR_PTC_DETECT_EN               (0x00000004)
+#define  USB_INTR_FRM_LST_ROLL_EN             (0x00000008)
+#define  USB_INTR_SYS_ERR_EN                  (0x00000010)
+#define  USB_INTR_ASYN_ADV_EN                 (0x00000020)
+#define  USB_INTR_RESET_EN                    (0x00000040)
+#define  USB_INTR_SOF_EN                      (0x00000080)
+#define  USB_INTR_DEVICE_SUSPEND              (0x00000100)
+
+/* Device Address bit masks */
+#define  USB_DEVICE_ADDRESS_MASK              (0xFE000000)
+#define  USB_DEVICE_ADDRESS_BIT_POS           (25)
+
+/* endpoint list address bit masks */
+#define USB_EP_LIST_ADDRESS_MASK              (0xfffff800)
+
+/* PORTSCX  Register Bit Masks */
+#define  PORTSCX_CURRENT_CONNECT_STATUS       (0x00000001)
+#define  PORTSCX_CONNECT_STATUS_CHANGE        (0x00000002)
+#define  PORTSCX_PORT_ENABLE                  (0x00000004)
+#define  PORTSCX_PORT_EN_DIS_CHANGE           (0x00000008)
+#define  PORTSCX_OVER_CURRENT_ACT             (0x00000010)
+#define  PORTSCX_OVER_CURRENT_CHG             (0x00000020)
+#define  PORTSCX_PORT_FORCE_RESUME            (0x00000040)
+#define  PORTSCX_PORT_SUSPEND                 (0x00000080)
+#define  PORTSCX_PORT_RESET                   (0x00000100)
+#define  PORTSCX_LINE_STATUS_BITS             (0x00000C00)
+#define  PORTSCX_PORT_POWER                   (0x00001000)
+#define  PORTSCX_PORT_INDICTOR_CTRL           (0x0000C000)
+#define  PORTSCX_PORT_TEST_CTRL               (0x000F0000)
+#define  PORTSCX_WAKE_ON_CONNECT_EN           (0x00100000)
+#define  PORTSCX_WAKE_ON_CONNECT_DIS          (0x00200000)
+#define  PORTSCX_WAKE_ON_OVER_CURRENT         (0x00400000)
+#define  PORTSCX_PHY_LOW_POWER_SPD            (0x00800000)
+#define  PORTSCX_PORT_FORCE_FULL_SPEED        (0x01000000)
+#define  PORTSCX_PORT_SPEED_MASK              (0x0C000000)
+#define  PORTSCX_PORT_WIDTH                   (0x10000000)
+#define  PORTSCX_PHY_TYPE_SEL                 (0xC0000000)
+
+/* bit 11-10 are line status */
+#define  PORTSCX_LINE_STATUS_SE0              (0x00000000)
+#define  PORTSCX_LINE_STATUS_JSTATE           (0x00000400)
+#define  PORTSCX_LINE_STATUS_KSTATE           (0x00000800)
+#define  PORTSCX_LINE_STATUS_UNDEF            (0x00000C00)
+#define  PORTSCX_LINE_STATUS_BIT_POS          (10)
+
+/* bit 15-14 are port indicator control */
+#define  PORTSCX_PIC_OFF                      (0x00000000)
+#define  PORTSCX_PIC_AMBER                    (0x00004000)
+#define  PORTSCX_PIC_GREEN                    (0x00008000)
+#define  PORTSCX_PIC_UNDEF                    (0x0000C000)
+#define  PORTSCX_PIC_BIT_POS                  (14)
+
+/* bit 19-16 are port test control */
+#define  PORTSCX_PTC_DISABLE                  (0x00000000)
+#define  PORTSCX_PTC_JSTATE                   (0x00010000)
+#define  PORTSCX_PTC_KSTATE                   (0x00020000)
+#define  PORTSCX_PTC_SEQNAK                   (0x00030000)
+#define  PORTSCX_PTC_PACKET                   (0x00040000)
+#define  PORTSCX_PTC_FORCE_EN                 (0x00050000)
+#define  PORTSCX_PTC_BIT_POS                  (16)
+
+/* bit 27-26 are port speed */
+#define  PORTSCX_PORT_SPEED_FULL              (0x00000000)
+#define  PORTSCX_PORT_SPEED_LOW               (0x04000000)
+#define  PORTSCX_PORT_SPEED_HIGH              (0x08000000)
+#define  PORTSCX_PORT_SPEED_UNDEF             (0x0C000000)
+#define  PORTSCX_SPEED_BIT_POS                (26)
+
+/* OTGSC Register Bit Masks */
+#define  OTGSC_B_SESSION_VALID_IRQ_EN           (1 << 27)
+#define  OTGSC_B_SESSION_VALID_IRQ_STS          (1 << 19)
+#define  OTGSC_B_SESSION_VALID                  (1 << 11)
+
+/* bit 28 is parallel transceiver width for UTMI interface */
+#define  PORTSCX_PTW                          (0x10000000)
+#define  PORTSCX_PTW_8BIT                     (0x00000000)
+#define  PORTSCX_PTW_16BIT                    (0x10000000)
+
+/* bit 31-30 are port transceiver select */
+#define  PORTSCX_PTS_UTMI                     (0x00000000)
+#define  PORTSCX_PTS_ULPI                     (0x80000000)
+#define  PORTSCX_PTS_FSLS                     (0xC0000000)
+#define  PORTSCX_PTS_BIT_POS                  (30)
+
+/* USB MODE Register Bit Masks */
+#define  USB_MODE_CTRL_MODE_IDLE              (0x00000000)
+#define  USB_MODE_CTRL_MODE_DEVICE            (0x00000002)
+#define  USB_MODE_CTRL_MODE_HOST              (0x00000003)
+#define  USB_MODE_CTRL_MODE_MASK              0x00000003
+#define  USB_MODE_CTRL_MODE_RSV               (0x00000001)
+#define  USB_MODE_ES                          0x00000004 /* (big) Endian Sel */
+#define  USB_MODE_SETUP_LOCK_OFF              (0x00000008)
+#define  USB_MODE_STREAM_DISABLE              (0x00000010)
+/* Endpoint Flush Register */
+#define EPFLUSH_TX_OFFSET		      (0x00010000)
+#define EPFLUSH_RX_OFFSET		      (0x00000000)
+
+/* Endpoint Setup Status bit masks */
+#define  EP_SETUP_STATUS_MASK                 (0x0000003F)
+#define  EP_SETUP_STATUS_EP0		      (0x00000001)
+
+/* ENDPOINTCTRLx  Register Bit Masks */
+#define  EPCTRL_TX_ENABLE                     (0x00800000)
+#define  EPCTRL_TX_DATA_TOGGLE_RST            (0x00400000)	/* Not EP0 */
+#define  EPCTRL_TX_DATA_TOGGLE_INH            (0x00200000)	/* Not EP0 */
+#define  EPCTRL_TX_TYPE                       (0x000C0000)
+#define  EPCTRL_TX_DATA_SOURCE                (0x00020000)	/* Not EP0 */
+#define  EPCTRL_TX_EP_STALL                   (0x00010000)
+#define  EPCTRL_RX_ENABLE                     (0x00000080)
+#define  EPCTRL_RX_DATA_TOGGLE_RST            (0x00000040)	/* Not EP0 */
+#define  EPCTRL_RX_DATA_TOGGLE_INH            (0x00000020)	/* Not EP0 */
+#define  EPCTRL_RX_TYPE                       (0x0000000C)
+#define  EPCTRL_RX_DATA_SINK                  (0x00000002)	/* Not EP0 */
+#define  EPCTRL_RX_EP_STALL                   (0x00000001)
+
+/* bit 19-18 and 3-2 are endpoint type */
+#define  EPCTRL_EP_TYPE_CONTROL               (0)
+#define  EPCTRL_EP_TYPE_ISO                   (1)
+#define  EPCTRL_EP_TYPE_BULK                  (2)
+#define  EPCTRL_EP_TYPE_INTERRUPT             (3)
+#define  EPCTRL_TX_EP_TYPE_SHIFT              (18)
+#define  EPCTRL_RX_EP_TYPE_SHIFT              (2)
+
+/* SNOOPn Register Bit Masks */
+#define  SNOOP_ADDRESS_MASK                   (0xFFFFF000)
+#define  SNOOP_SIZE_ZERO                      (0x00)	/* snooping disable */
+#define  SNOOP_SIZE_4KB                       (0x0B)	/* 4KB snoop size */
+#define  SNOOP_SIZE_8KB                       (0x0C)
+#define  SNOOP_SIZE_16KB                      (0x0D)
+#define  SNOOP_SIZE_32KB                      (0x0E)
+#define  SNOOP_SIZE_64KB                      (0x0F)
+#define  SNOOP_SIZE_128KB                     (0x10)
+#define  SNOOP_SIZE_256KB                     (0x11)
+#define  SNOOP_SIZE_512KB                     (0x12)
+#define  SNOOP_SIZE_1MB                       (0x13)
+#define  SNOOP_SIZE_2MB                       (0x14)
+#define  SNOOP_SIZE_4MB                       (0x15)
+#define  SNOOP_SIZE_8MB                       (0x16)
+#define  SNOOP_SIZE_16MB                      (0x17)
+#define  SNOOP_SIZE_32MB                      (0x18)
+#define  SNOOP_SIZE_64MB                      (0x19)
+#define  SNOOP_SIZE_128MB                     (0x1A)
+#define  SNOOP_SIZE_256MB                     (0x1B)
+#define  SNOOP_SIZE_512MB                     (0x1C)
+#define  SNOOP_SIZE_1GB                       (0x1D)
+#define  SNOOP_SIZE_2GB                       (0x1E)	/* 2GB snoop size */
+
+/* pri_ctrl Register Bit Masks */
+#define  PRI_CTRL_PRI_LVL1                    (0x0000000C)
+#define  PRI_CTRL_PRI_LVL0                    (0x00000003)
+
+/* si_ctrl Register Bit Masks */
+#define  SI_CTRL_ERR_DISABLE                  (0x00000010)
+#define  SI_CTRL_IDRC_DISABLE                 (0x00000008)
+#define  SI_CTRL_RD_SAFE_EN                   (0x00000004)
+#define  SI_CTRL_RD_PREFETCH_DISABLE          (0x00000002)
+#define  SI_CTRL_RD_PREFEFETCH_VAL            (0x00000001)
+
+/* control Register Bit Masks */
+#define  USB_CTRL_IOENB                       (0x00000004)
+#define  USB_CTRL_ULPI_INT0EN                 (0x00000001)
+#define  USB_CTRL_OTG_WUIR                   (0x80000000)
+#define  USB_CTRL_OTG_WUIE                   (0x08000000)
+#define  USB_CTRL_OTG_VWUE			(0x00001000)
+#define  USB_CTRL_OTG_IWUE			(0x00100000)
+
+
+
+#define INTR_UE		      (1 << 0)
+#define INTR_UEE	      (1 << 1)
+#define INTR_PCE	      (1 << 2)
+#define INTR_SEE	      (1 << 4)
+#define INTR_URE	      (1 << 6)
+#define INTR_SRE	      (1 << 7)
+#define INTR_SLE	      (1 << 8)
+
+
+/* bits used in all the endpoint status registers */
+#define EPT_TX(n) (1 << ((n) + 16))
+#define EPT_RX(n) (1 << (n))
+
+
+#define CTRL_TXE              (1 << 23)
+#define CTRL_TXR              (1 << 22)
+#define CTRL_TXI              (1 << 21)
+#define CTRL_TXD              (1 << 17)
+#define CTRL_TXS              (1 << 16)
+#define CTRL_RXE              (1 << 7)
+#define CTRL_RXR              (1 << 6)
+#define CTRL_RXI              (1 << 5)
+#define CTRL_RXD              (1 << 1)
+#define CTRL_RXS              (1 << 0)
+
+#define CTRL_TXT_CTRL         (0 << 18)
+#define CTRL_TXT_ISOCH        (1 << 18)
+#define CTRL_TXT_BULK         (2 << 18)
+#define CTRL_TXT_INT          (3 << 18)
+
+#define CTRL_RXT_CTRL         (0 << 2)
+#define CTRL_RXT_ISOCH        (1 << 2)
+#define CTRL_RXT_BULK         (2 << 2)
+#define CTRL_RXT_INT          (3 << 2)
+
+#define USB_RECV 0
+#define USB_SEND 1
+#define USB_MAX_CTRL_PAYLOAD 64
+
+/* UDC device defines */
+#define EP0_MAX_PACKET_SIZE     USB_MAX_CTRL_PAYLOAD
+#define UDC_OUT_ENDPOINT        0x02
+#define UDC_OUT_PACKET_SIZE     USB_MAX_CTRL_PAYLOAD
+#define UDC_IN_ENDPOINT         0x03
+#define UDC_IN_PACKET_SIZE      USB_MAX_CTRL_PAYLOAD
+#define UDC_INT_ENDPOINT        0x01
+#define UDC_INT_PACKET_SIZE     USB_MAX_CTRL_PAYLOAD
+#define UDC_BULK_PACKET_SIZE    USB_MAX_CTRL_PAYLOAD
+
+int  udc_init(void);
+
+void udc_enable(struct usb_device_instance *device);
+void udc_disable(void);
+
+void udc_connect(void);
+void udc_disconnect(void);
+
+void udc_startup_events(struct usb_device_instance *device);
+void udc_setup_ep(struct usb_device_instance *device,
+	unsigned int ep, struct usb_endpoint_instance *endpoint);
+int udc_endpoint_write(struct usb_endpoint_instance *epi);
+void udc_irq(void);
+void usb_shutdown(void);
+
+int is_usb_disconnected(void);
+
+#endif
diff --git a/include/usbdevice.h b/include/usbdevice.h
index 206dbbc86..82acfb2ab 100644
--- a/include/usbdevice.h
+++ b/include/usbdevice.h
@@ -467,7 +467,9 @@ typedef struct urb_link {
  * function driver to inform it that data has arrived.
  */
 
-#define URB_BUF_SIZE 128 /* in linux we'd malloc this, but in u-boot we prefer static data */
+/* in linux we'd malloc this, but in u-boot we prefer static data */
+#define URB_BUF_SIZE 256
+
 struct urb {
 
 	struct usb_endpoint_instance *endpoint;