diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/io.c')
| -rw-r--r-- | drivers/net/wireless/wl12xx/io.c | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/drivers/net/wireless/wl12xx/io.c b/drivers/net/wireless/wl12xx/io.c new file mode 100644 index 00000000000..d557f73e7c1 --- /dev/null +++ b/drivers/net/wireless/wl12xx/io.c @@ -0,0 +1,171 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2010 Nokia Corporation + * + * Contact: Luciano Coelho <luciano.coelho@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/crc7.h> +#include <linux/spi/spi.h> + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "io.h" + +#define OCP_CMD_LOOP 32 + +#define OCP_CMD_WRITE 0x1 +#define OCP_CMD_READ 0x2 + +#define OCP_READY_MASK BIT(18) +#define OCP_STATUS_MASK (BIT(16) | BIT(17)) + +#define OCP_STATUS_NO_RESP 0x00000 +#define OCP_STATUS_OK 0x10000 +#define OCP_STATUS_REQ_FAILED 0x20000 +#define OCP_STATUS_RESP_ERROR 0x30000 + +void wl1271_disable_interrupts(struct wl1271 *wl) +{ + wl->if_ops->disable_irq(wl); +} + +void wl1271_enable_interrupts(struct wl1271 *wl) +{ + wl->if_ops->enable_irq(wl); +} + +/* Set the SPI partitions to access the chip addresses + * + * To simplify driver code, a fixed (virtual) memory map is defined for + * register and memory addresses. Because in the chipset, in different stages + * of operation, those addresses will move around, an address translation + * mechanism is required. + * + * There are four partitions (three memory and one register partition), + * which are mapped to two different areas of the hardware memory. + * + * Virtual address + * space + * + * | | + * ...+----+--> mem.start + * Physical address ... | | + * space ... | | [PART_0] + * ... | | + * 00000000 <--+----+... ...+----+--> mem.start + mem.size + * | | ... | | + * |MEM | ... | | + * | | ... | | + * mem.size <--+----+... | | {unused area) + * | | ... | | + * |REG | ... | | + * mem.size | | ... | | + * + <--+----+... ...+----+--> reg.start + * reg.size | | ... | | + * |MEM2| ... | | [PART_1] + * | | ... | | + * ...+----+--> reg.start + reg.size + * | | + * + */ +int wl1271_set_partition(struct wl1271 *wl, + struct wl1271_partition_set *p) +{ + /* copy partition info */ + memcpy(&wl->part, p, sizeof(*p)); + + wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + p->mem.start, p->mem.size); + wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + p->reg.start, p->reg.size); + wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X", + p->mem2.start, p->mem2.size); + wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X", + p->mem3.start, p->mem3.size); + + /* write partition info to the chipset */ + wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start); + wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size); + wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start); + wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size); + wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start); + wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size); + wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start); + + return 0; +} +EXPORT_SYMBOL_GPL(wl1271_set_partition); + +void wl1271_io_reset(struct wl1271 *wl) +{ + wl->if_ops->reset(wl); +} + +void wl1271_io_init(struct wl1271 *wl) +{ + wl->if_ops->init(wl); +} + +void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val) +{ + /* write address >> 1 + 0x30000 to OCP_POR_CTR */ + addr = (addr >> 1) + 0x30000; + wl1271_write32(wl, OCP_POR_CTR, addr); + + /* write value to OCP_POR_WDATA */ + wl1271_write32(wl, OCP_DATA_WRITE, val); + + /* write 1 to OCP_CMD */ + wl1271_write32(wl, OCP_CMD, OCP_CMD_WRITE); +} + +u16 wl1271_top_reg_read(struct wl1271 *wl, int addr) +{ + u32 val; + int timeout = OCP_CMD_LOOP; + + /* write address >> 1 + 0x30000 to OCP_POR_CTR */ + addr = (addr >> 1) + 0x30000; + wl1271_write32(wl, OCP_POR_CTR, addr); + + /* write 2 to OCP_CMD */ + wl1271_write32(wl, OCP_CMD, OCP_CMD_READ); + + /* poll for data ready */ + do { + val = wl1271_read32(wl, OCP_DATA_READ); + } while (!(val & OCP_READY_MASK) && --timeout); + + if (!timeout) { + wl1271_warning("Top register access timed out."); + return 0xffff; + } + + /* check data status and return if OK */ + if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK) + return val & 0xffff; + else { + wl1271_warning("Top register access returned error."); + return 0xffff; + } +} + |