diff options
Diffstat (limited to 'arch/arm/plat-mxc')
79 files changed, 3055 insertions, 2487 deletions
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c new file mode 100644 index 00000000000..639c54a0799 --- /dev/null +++ b/arch/arm/plat-mxc/3ds_debugboard.c @@ -0,0 +1,202 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> + +#include <mach/hardware.h> + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR(n) (n + 0x0) +/* External UART */ +#define UARTA_BASE_ADDR(n) (n + 0x8000) +#define UARTB_BASE_ADDR(n) (n + 0x10000) + +#define BOARD_IO_ADDR(n) (n + 0x20000) +/* LED switchs */ +#define LED_SWITCH_REG 0x00 +/* buttons */ +#define SWITCH_BUTTONS_REG 0x08 +/* status, interrupt */ +#define INTR_STATUS_REG 0x10 +#define INTR_MASK_REG 0x38 +#define INTR_RESET_REG 0x20 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER1_REG 0x40 +#define MAGIC_NUMBER2_REG 0x48 +/* CPLD code version */ +#define CPLD_CODE_VER_REG 0x50 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER3_REG 0x58 +/* module reset register*/ +#define MODULE_RESET_REG 0x60 +/* CPU ID and Personality ID */ +#define MCU_BOARD_ID_REG 0x68 + +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_INTERNAL_IRQS) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_MAX_EXP_IO_LINES 16 + +/* interrupts like external uart , external ethernet etc*/ +#define EXPIO_INT_ENET (MXC_BOARD_IRQ_START + 0) +#define EXPIO_INT_XUART_A (MXC_BOARD_IRQ_START + 1) +#define EXPIO_INT_XUART_B (MXC_BOARD_IRQ_START + 2) +#define EXPIO_INT_BUTTON_A (MXC_BOARD_IRQ_START + 3) +#define EXPIO_INT_BUTTON_B (MXC_BOARD_IRQ_START + 4) + +static void __iomem *brd_io; +static void expio_ack_irq(u32 irq); + +static struct resource smsc911x_resources[] = { + { + .flags = IORESOURCE_MEM, + } , { + .start = EXPIO_INT_ENET, + .end = EXPIO_INT_ENET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc_lan9217_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &smsc911x_config, + }, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; + +static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 imr_val; + u32 int_valid; + u32 expio_irq; + + desc->chip->mask(irq); /* irq = gpio irq number */ + + imr_val = __raw_readw(brd_io + INTR_MASK_REG); + int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; + + expio_irq = MXC_BOARD_IRQ_START; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + struct irq_desc *d; + if ((int_valid & 1) == 0) + continue; + d = irq_desc + expio_irq; + if (unlikely(!(d->handle_irq))) + pr_err("\nEXPIO irq: %d unhandled\n", expio_irq); + else + d->handle_irq(expio_irq, d); + } + + desc->chip->ack(irq); + desc->chip->unmask(irq); +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * Irq is an expio virtual irq number + */ +static void expio_mask_irq(u32 irq) +{ + u16 reg; + u32 expio = MXC_IRQ_TO_EXPIO(irq); + + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg |= (1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +static void expio_ack_irq(u32 irq) +{ + u32 expio = MXC_IRQ_TO_EXPIO(irq); + + __raw_writew(1 << expio, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + expio_mask_irq(irq); +} + +static void expio_unmask_irq(u32 irq) +{ + u16 reg; + u32 expio = MXC_IRQ_TO_EXPIO(irq); + + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg &= ~(1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +static struct irq_chip expio_irq_chip = { + .ack = expio_ack_irq, + .mask = expio_mask_irq, + .unmask = expio_unmask_irq, +}; + +int __init mxc_expio_init(u32 base, u32 p_irq) +{ + int i; + + brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K); + if (brd_io == NULL) + return -ENOMEM; + + if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || + (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || + (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { + pr_info("3-Stack Debug board not detected\n"); + iounmap(brd_io); + brd_io = NULL; + return -ENODEV; + } + + pr_info("3-Stack Debug board detected, rev = 0x%04X\n", + readw(brd_io + CPLD_CODE_VER_REG)); + + /* + * Configure INT line as GPIO input + */ + gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq"); + gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq)); + + /* disable the interrupt and clear the status */ + __raw_writew(0, brd_io + INTR_MASK_REG); + __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + __raw_writew(0x1F, brd_io + INTR_MASK_REG); + for (i = MXC_EXP_IO_BASE; + i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) { + set_irq_chip(i, &expio_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + set_irq_type(p_irq, IRQF_TRIGGER_LOW); + set_irq_chained_handler(p_irq, mxc_expio_irq_handler); + + /* Register Lan device on the debugboard */ + smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); + smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; + platform_device_register(&smsc_lan9217_device); + + return 0; +} diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 7f7ad6f289b..64e3a64520e 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -1,5 +1,7 @@ if ARCH_MXC +source "arch/arm/plat-mxc/devices/Kconfig" + menu "Freescale MXC Implementations" choice @@ -8,15 +10,12 @@ choice config ARCH_MX1 bool "MX1-based" - select CPU_ARM920T - select IMX_HAVE_IOMUX_V1 + select SOC_IMX1 help This enables support for systems based on the Freescale i.MX1 family config ARCH_MX2 bool "MX2-based" - select CPU_ARM926T - select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX2 family @@ -25,6 +24,7 @@ config ARCH_MX25 select CPU_ARM926T select ARCH_MXC_IOMUX_V3 select HAVE_FB_IMX + select ARCH_MXC_AUDMUX_V2 help This enables support for systems based on the Freescale i.MX25 family @@ -43,13 +43,13 @@ config ARCH_MXC91231 config ARCH_MX5 bool "MX5-based" select CPU_V7 + select ARM_L1_CACHE_SHIFT_6 help This enables support for systems based on the Freescale i.MX51 family endchoice -source "arch/arm/mach-mx1/Kconfig" -source "arch/arm/mach-mx2/Kconfig" +source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-mx3/Kconfig" source "arch/arm/mach-mx25/Kconfig" source "arch/arm/mach-mxc91231/Kconfig" @@ -81,6 +81,29 @@ config MXC_PWM help Enable support for the i.MX PWM controller(s). +config MXC_DEBUG_BOARD + bool "Enable MXC debug board(for 3-stack)" + help + The debug board is an integral part of the MXC 3-stack(PDK) + platforms, it can be attached or removed from the peripheral + board. On debug board, several debug devices(ethernet, UART, + buttons, LEDs and JTAG) are implemented. Between the MCU and + these devices, a CPLD is added as a bridge which performs + data/address de-multiplexing and decode, signal level shift, + interrupt control and various board functions. + +config HAVE_EPIT + bool + +config MXC_USE_EPIT + bool "Use EPIT instead of GPT" + depends on HAVE_EPIT + help + Use EPIT as the system timer on systems that have it. Normally you + don't have a reason to do so as the EPIT has the same features and + uses the same clocks as the GPT. Anyway, on some systems the GPT + may be in use for other purposes. + config MXC_ULPI bool @@ -99,4 +122,8 @@ config ARCH_MXC_AUDMUX_V1 config ARCH_MXC_AUDMUX_V2 bool +config IRAM_ALLOC + bool + select GENERIC_ALLOCATOR + endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 895bc3c5e0c..37267095278 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -8,16 +8,20 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o # MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o) obj-$(CONFIG_MXC_TZIC) += tzic.o -obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o -obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o +obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o +obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o +obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o +obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o ifdef CONFIG_SND_IMX_SOC obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif + +obj-y += devices/ diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c index b62917ca3f9..1180bef7664 100644 --- a/arch/arm/plat-mxc/audmux-v1.c +++ b/arch/arm/plat-mxc/audmux-v1.c @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index 0c2cc5cd4d8..0be1ac7f421 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> @@ -141,6 +137,7 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf, static const struct file_operations audmux_debugfs_fops = { .open = audmux_open_file, .read = audmux_read_file, + .llseek = default_llseek, }; static void audmux_debugfs_init(void) @@ -190,7 +187,14 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port); static int mxc_audmux_v2_init(void) { int ret; - +#if defined(CONFIG_ARCH_MX5) + if (cpu_is_mx51()) { + audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR); + ret = 0; + return ret; + } +#endif +#if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); @@ -204,7 +208,19 @@ static int mxc_audmux_v2_init(void) } audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); } - +#endif +#if defined(CONFIG_ARCH_MX25) + if (cpu_is_mx25()) { + audmux_clk = clk_get(NULL, "audmux"); + if (IS_ERR(audmux_clk)) { + ret = PTR_ERR(audmux_clk); + printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, + ret); + return ret; + } + audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR); + } +#endif audmux_debugfs_init(); return 0; diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 323ff8ccc87..2ed3ab173ad 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -52,13 +52,14 @@ static void __clk_disable(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) return; - - __clk_disable(clk->parent); - __clk_disable(clk->secondary); - WARN_ON(!clk->usecount); - if (!(--clk->usecount) && clk->disable) - clk->disable(clk); + + if (!(--clk->usecount)) { + if (clk->disable) + clk->disable(clk); + __clk_disable(clk->parent); + __clk_disable(clk->secondary); + } } static int __clk_enable(struct clk *clk) @@ -66,12 +67,13 @@ static int __clk_enable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - __clk_enable(clk->parent); - __clk_enable(clk->secondary); - - if (clk->usecount++ == 0 && clk->enable) - clk->enable(clk); + if (clk->usecount++ == 0) { + __clk_enable(clk->parent); + __clk_enable(clk->secondary); + if (clk->enable) + clk->enable(clk); + } return 0; } @@ -160,17 +162,28 @@ EXPORT_SYMBOL(clk_set_rate); int clk_set_parent(struct clk *clk, struct clk *parent) { int ret = -EINVAL; + struct clk *old; if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent) || clk->set_parent == NULL) return ret; + if (clk->usecount) + clk_enable(parent); + mutex_lock(&clocks_mutex); ret = clk->set_parent(clk, parent); - if (ret == 0) + if (ret == 0) { + old = clk->parent; clk->parent = parent; + } else { + old = parent; + } mutex_unlock(&clocks_mutex); + if (clk->usecount) + clk_disable(old); + return ret; } EXPORT_SYMBOL(clk_set_parent); diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c new file mode 100644 index 00000000000..039538e6879 --- /dev/null +++ b/arch/arm/plat-mxc/cpufreq.c @@ -0,0 +1,206 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * A driver for the Freescale Semiconductor i.MXC CPUfreq module. + * The CPUFREQ driver is for controling CPU frequency. It allows you to change + * the CPU clock speed on the fly. + */ + +#include <linux/cpufreq.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <mach/hardware.h> +#include <mach/clock.h> + +#define CLK32_FREQ 32768 +#define NANOSECOND (1000 * 1000 * 1000) + +struct cpu_op *(*get_cpu_op)(int *op); + +static int cpu_freq_khz_min; +static int cpu_freq_khz_max; + +static struct clk *cpu_clk; +static struct cpufreq_frequency_table *imx_freq_table; + +static int cpu_op_nr; +static struct cpu_op *cpu_op_tbl; + +static int set_cpu_freq(int freq) +{ + int ret = 0; + int org_cpu_rate; + + org_cpu_rate = clk_get_rate(cpu_clk); + if (org_cpu_rate == freq) + return ret; + + ret = clk_set_rate(cpu_clk, freq); + if (ret != 0) { + printk(KERN_DEBUG "cannot set CPU clock rate\n"); + return ret; + } + + return ret; +} + +static int mxc_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + return cpufreq_frequency_table_verify(policy, imx_freq_table); +} + +static unsigned int mxc_get_speed(unsigned int cpu) +{ + if (cpu) + return 0; + + return clk_get_rate(cpu_clk) / 1000; +} + +static int mxc_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + struct cpufreq_freqs freqs; + int freq_Hz; + int ret = 0; + unsigned int index; + + cpufreq_frequency_table_target(policy, imx_freq_table, + target_freq, relation, &index); + freq_Hz = imx_freq_table[index].frequency * 1000; + + freqs.old = clk_get_rate(cpu_clk) / 1000; + freqs.new = freq_Hz / 1000; + freqs.cpu = 0; + freqs.flags = 0; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + ret = set_cpu_freq(freq_Hz); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return ret; +} + +static int __init mxc_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret; + int i; + + printk(KERN_INFO "i.MXC CPU frequency driver\n"); + + if (policy->cpu != 0) + return -EINVAL; + + if (!get_cpu_op) + return -EINVAL; + + cpu_clk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(cpu_clk)) { + printk(KERN_ERR "%s: failed to get cpu clock\n", __func__); + return PTR_ERR(cpu_clk); + } + + cpu_op_tbl = get_cpu_op(&cpu_op_nr); + + cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000; + cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000; + + imx_freq_table = kmalloc( + sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1), + GFP_KERNEL); + if (!imx_freq_table) { + ret = -ENOMEM; + goto err1; + } + + for (i = 0; i < cpu_op_nr; i++) { + imx_freq_table[i].index = i; + imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000; + + if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min) + cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000; + + if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max) + cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000; + } + + imx_freq_table[i].index = i; + imx_freq_table[i].frequency = CPUFREQ_TABLE_END; + + policy->cur = clk_get_rate(cpu_clk) / 1000; + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min; + policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max; + + /* Manual states, that PLL stabilizes in two CLK32 periods */ + policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ; + + ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table); + + if (ret < 0) { + printk(KERN_ERR "%s: failed to register i.MXC CPUfreq \ + with error code %d\n", __func__, ret); + goto err; + } + + cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu); + return 0; +err: + kfree(imx_freq_table); +err1: + clk_put(cpu_clk); + return ret; +} + +static int mxc_cpufreq_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + + set_cpu_freq(cpu_freq_khz_max * 1000); + clk_put(cpu_clk); + kfree(imx_freq_table); + return 0; +} + +static struct cpufreq_driver mxc_driver = { + .flags = CPUFREQ_STICKY, + .verify = mxc_verify_speed, + .target = mxc_set_target, + .get = mxc_get_speed, + .init = mxc_cpufreq_init, + .exit = mxc_cpufreq_exit, + .name = "imx", +}; + +static int __devinit mxc_cpufreq_driver_init(void) +{ + return cpufreq_register_driver(&mxc_driver); +} + +static void mxc_cpufreq_driver_exit(void) +{ + cpufreq_unregister_driver(&mxc_driver); +} + +module_init(mxc_cpufreq_driver_init); +module_exit(mxc_cpufreq_driver_exit); + +MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>"); +MODULE_DESCRIPTION("CPUfreq driver for i.MX"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index 56f2fb5cc45..735776d8495 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <mach/common.h> @@ -35,3 +36,35 @@ int __init mxc_register_device(struct platform_device *pdev, void *data) return ret; } +struct platform_device *__init imx_add_platform_device(const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data) +{ + int ret = -ENOMEM; + struct platform_device *pdev; + + pdev = platform_device_alloc(name, id); + if (!pdev) + goto err; + + if (res) { + ret = platform_device_add_resources(pdev, res, num_resources); + if (ret) + goto err; + } + + if (data) { + ret = platform_device_add_data(pdev, data, size_data); + if (ret) + goto err; + } + + ret = platform_device_add(pdev); + if (ret) { +err: + platform_device_put(pdev); + return ERR_PTR(ret); + } + + return pdev; +} diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig new file mode 100644 index 00000000000..9aa6f3ea901 --- /dev/null +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -0,0 +1,29 @@ +config IMX_HAVE_PLATFORM_ESDHC + bool + +config IMX_HAVE_PLATFORM_FEC + bool + default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51 + +config IMX_HAVE_PLATFORM_FLEXCAN + select HAVE_CAN_FLEXCAN if CAN + bool + +config IMX_HAVE_PLATFORM_GPIO_KEYS + bool + default y if ARCH_MX51 + +config IMX_HAVE_PLATFORM_IMX_I2C + bool + +config IMX_HAVE_PLATFORM_IMX_SSI + bool + +config IMX_HAVE_PLATFORM_IMX_UART + bool + +config IMX_HAVE_PLATFORM_MXC_NAND + bool + +config IMX_HAVE_PLATFORM_SPI_IMX + bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile new file mode 100644 index 00000000000..45aefeb283b --- /dev/null +++ b/arch/arm/plat-mxc/devices/Makefile @@ -0,0 +1,10 @@ +obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o +obj-y += platform-imx-dma.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c new file mode 100644 index 00000000000..2605bfa0dfb --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-esdhc.c @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <mach/hardware.h> +#include <mach/devices-common.h> +#include <mach/esdhc.h> + +#define imx_esdhc_imx_data_entry_single(soc, _id, hwid) \ + { \ + .id = _id, \ + .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \ + .irq = soc ## _INT_ESDHC ## hwid, \ + } + +#define imx_esdhc_imx_data_entry(soc, id, hwid) \ + [id] = imx_esdhc_imx_data_entry_single(soc, id, hwid) + +#ifdef CONFIG_ARCH_MX25 +const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst = { +#define imx25_esdhc_data_entry(_id, _hwid) \ + imx_esdhc_imx_data_entry(MX25, _id, _hwid) + imx25_esdhc_data_entry(0, 1), + imx25_esdhc_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst = { +#define imx35_esdhc_data_entry(_id, _hwid) \ + imx_esdhc_imx_data_entry(MX35, _id, _hwid) + imx35_esdhc_data_entry(0, 1), + imx35_esdhc_data_entry(1, 2), + imx35_esdhc_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst = { +#define imx51_esdhc_data_entry(_id, _hwid) \ + imx_esdhc_imx_data_entry(MX51, _id, _hwid) + imx51_esdhc_data_entry(0, 1), + imx51_esdhc_data_entry(1, 2), + imx51_esdhc_data_entry(2, 3), + imx51_esdhc_data_entry(3, 4), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_esdhc( + const struct imx_esdhc_imx_data *data, + const struct esdhc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("sdhci-esdhc-imx", data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c new file mode 100644 index 00000000000..11d087f4e21 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_fec_data_entry_single(soc) \ + { \ + .iobase = soc ## _FEC_BASE_ADDR, \ + .irq = soc ## _INT_FEC, \ + } + +#ifdef CONFIG_ARCH_MX25 +const struct imx_fec_data imx25_fec_data __initconst = + imx_fec_data_entry_single(MX25); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_fec_data imx27_fec_data __initconst = + imx_fec_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_fec_data imx35_fec_data __initconst = + imx_fec_data_entry_single(MX35); +#endif + +#ifdef CONFIG_ARCH_MX51 +const struct imx_fec_data imx51_fec_data __initconst = + imx_fec_data_entry_single(MX51); +#endif + +struct platform_device *__init imx_add_fec( + const struct imx_fec_data *data, + const struct fec_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("fec", 0 /* -1? */, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/plat-mxc/devices/platform-flexcan.c new file mode 100644 index 00000000000..5e97a01f14f --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-flexcan.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <mach/devices-common.h> + +struct platform_device *__init imx_add_flexcan(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct flexcan_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("flexcan", id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-gpio_keys.c b/arch/arm/plat-mxc/devices/platform-gpio_keys.c new file mode 100644 index 00000000000..1c53a532ea0 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-gpio_keys.c @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ +#include <asm/sizes.h> +#include <mach/hardware.h> +#include <mach/devices-common.h> + +struct platform_device *__init imx_add_gpio_keys( + const struct gpio_keys_platform_data *pdata) +{ + return imx_add_platform_device("gpio-keys", -1, NULL, + 0, pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c new file mode 100644 index 00000000000..02d98901805 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/hardware.h> +#include <mach/devices-common.h> +#ifdef SDMA_IS_MERGED +#include <mach/sdma.h> +#else +struct sdma_platform_data { + int sdma_version; + char *cpu_name; + int to_version; +}; +#endif + +struct imx_imx_sdma_data { + resource_size_t iobase; + resource_size_t irq; + struct sdma_platform_data pdata; +}; + +#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\ + { \ + .iobase = soc ## _SDMA ## _BASE_ADDR, \ + .irq = soc ## _INT_SDMA, \ + .pdata = { \ + .sdma_version = _sdma_version, \ + .cpu_name = _cpu_name, \ + .to_version = _to_version, \ + }, \ + } + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_sdma_data imx25_imx_sdma_data __initconst = + imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_ARCH_MX31 +struct imx_imx_sdma_data imx31_imx_sdma_data __initdata = + imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0); +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +struct imx_imx_sdma_data imx35_imx_sdma_data __initdata = + imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0); +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = + imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0); +#endif /* ifdef CONFIG_ARCH_MX51 */ + +static struct platform_device __init __maybe_unused *imx_add_imx_sdma( + const struct imx_imx_sdma_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-sdma", -1, + res, ARRAY_SIZE(res), + &data->pdata, sizeof(data->pdata)); +} + +static struct platform_device __init __maybe_unused *imx_add_imx_dma(void) +{ + return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0); +} + +static int __init imxXX_add_imx_dma(void) +{ + struct platform_device *ret; + +#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27) + if (cpu_is_mx21() || cpu_is_mx27()) + ret = imx_add_imx_dma(); + else +#endif + +#if defined(CONFIG_ARCH_MX25) + if (cpu_is_mx25()) + ret = imx_add_imx_sdma(&imx25_imx_sdma_data); + else +#endif + +#if defined(CONFIG_ARCH_MX31) + if (cpu_is_mx31()) { + imx31_imx_sdma_data.pdata.to_version = mx31_revision() >> 4; + ret = imx_add_imx_sdma(&imx31_imx_sdma_data); + } else +#endif + +#if defined(CONFIG_ARCH_MX35) + if (cpu_is_mx35()) { + imx35_imx_sdma_data.pdata.to_version = mx35_revision() >> 4; + ret = imx_add_imx_sdma(&imx35_imx_sdma_data); + } else +#endif + +#if defined(CONFIG_ARCH_MX51) + if (cpu_is_mx51()) + ret = imx_add_imx_sdma(&imx51_imx_sdma_data); + else +#endif + ret = ERR_PTR(-ENODEV); + + if (IS_ERR(ret)) + return PTR_ERR(ret); + + return 0; +} +arch_initcall(imxXX_add_imx_dma); diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c new file mode 100644 index 00000000000..679588453aa --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_I2C ## _hwid, \ + } + +#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst = + imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX1 */ + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = + imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { +#define imx25_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_imx_i2c_data_entry(0, 1), + imx25_imx_i2c_data_entry(1, 2), + imx25_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { +#define imx27_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_i2c_data_entry(0, 1), + imx27_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { +#define imx31_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_i2c_data_entry(0, 1), + imx31_imx_i2c_data_entry(1, 2), + imx31_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { +#define imx35_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K) + imx35_imx_i2c_data_entry(0, 1), + imx35_imx_i2c_data_entry(1, 2), + imx35_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { +#define imx51_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_i2c_data_entry(0, 1), + imx51_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, + const struct imxi2c_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-i2c", data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c new file mode 100644 index 00000000000..38a7a0b8f2f --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_SSI ## _hwid, \ + .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \ + .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \ + .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \ + .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { +#define imx21_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_ssi_data_entry(0, 1), + imx21_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = { +#define imx25_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K) + imx25_imx_ssi_data_entry(0, 1), + imx25_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { +#define imx27_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_ssi_data_entry(0, 1), + imx27_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = { +#define imx31_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_ssi_data_entry(0, 1), + imx31_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = { +#define imx35_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K) + imx35_imx_ssi_data_entry(0, 1), + imx35_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = { +#define imx51_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_ssi_data_entry(0, 1), + imx51_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, +#define DMARES(_name) { \ + .name = #_name, \ + .start = data->dma ## _name, \ + .end = data->dma ## _name, \ + .flags = IORESOURCE_DMA, \ +} + DMARES(tx0), + DMARES(rx0), + DMARES(tx1), + DMARES(rx1), + }; + + return imx_add_platform_device("imx-ssi", data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c new file mode 100644 index 00000000000..2039640adf2 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irqrx = soc ## _INT_UART ## _hwid ## RX, \ + .irqtx = soc ## _INT_UART ## _hwid ## TX, \ + .irqrts = soc ## _INT_UART ## _hwid ## RTS, \ + } + +#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_UART ## _hwid, \ + } + +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = { +#define imx1_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0) + imx1_imx_uart_data_entry(0, 1), + imx1_imx_uart_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX1 */ + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { +#define imx21_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_uart_data_entry(0, 1), + imx21_imx_uart_data_entry(1, 2), + imx21_imx_uart_data_entry(2, 3), + imx21_imx_uart_data_entry(3, 4), +}; +#endif + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = { +#define imx25_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_imx_uart_data_entry(0, 1), + imx25_imx_uart_data_entry(1, 2), + imx25_imx_uart_data_entry(2, 3), + imx25_imx_uart_data_entry(3, 4), + imx25_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { +#define imx27_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_uart_data_entry(0, 1), + imx27_imx_uart_data_entry(1, 2), + imx27_imx_uart_data_entry(2, 3), + imx27_imx_uart_data_entry(3, 4), + imx27_imx_uart_data_entry(4, 5), + imx27_imx_uart_data_entry(5, 6), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { +#define imx31_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_uart_data_entry(0, 1), + imx31_imx_uart_data_entry(1, 2), + imx31_imx_uart_data_entry(2, 3), + imx31_imx_uart_data_entry(3, 4), + imx31_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { +#define imx35_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K) + imx35_imx_uart_data_entry(0, 1), + imx35_imx_uart_data_entry(1, 2), + imx35_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = { +#define imx51_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_uart_data_entry(0, 1), + imx51_imx_uart_data_entry(1, 2), + imx51_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_uart_3irq( + const struct imx_imx_uart_3irq_data *data, + const struct imxuart_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irqrx, + .end = data->irqrx, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irqtx, + .end = data->irqtx, + .flags = IORESOURCE_IRQ, + }, { + .start = data->irqrts, + .end = data->irqrx, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-uart", data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} + +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, + const struct imxuart_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c new file mode 100644 index 00000000000..3fdcc32e3d6 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_mxc_nand_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_NFC \ + } + +#define imx_mxc_nandv3_data_entry_single(soc, _size) \ + { \ + .id = -1, \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .axibase = soc ## _NFC_AXI_BASE_ADDR, \ + .irq = soc ## _INT_NFC \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX21, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX25, SZ_8K); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX27, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX31, SZ_4K); +#endif + +#ifdef CONFIG_ARCH_MX35 +const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX35, SZ_8K); +#endif + +#ifdef CONFIG_ARCH_MX51 +const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst = + imx_mxc_nandv3_data_entry_single(MX51, SZ_16K); +#endif + +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata) +{ + /* AXI has to come first, that's how the mxc_nand driver expect it */ + struct resource res[] = { + { + .start = data->axibase, + .end = data->axibase + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + return imx_add_platform_device("mxc_nand", data->id, + res + !data->axibase, + ARRAY_SIZE(res) - !data->axibase, + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c new file mode 100644 index 00000000000..e48340ec331 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \ + { \ + .devid = _devid, \ + .id = _id, \ + .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_ ## type ## hwid, \ + } + +#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ + [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { +#define imx21_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K) + imx21_cspi_data_entry(0, 1), + imx21_cspi_data_entry(1, 2), +#endif + +#ifdef CONFIG_ARCH_MX25 +const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { +#define imx25_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K) + imx25_cspi_data_entry(0, 1), + imx25_cspi_data_entry(1, 2), + imx25_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { +#define imx27_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K) + imx27_cspi_data_entry(0, 1), + imx27_cspi_data_entry(1, 2), + imx27_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_spi_imx_data imx31_cspi_data[] __initconst = { +#define imx31_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K) + imx31_cspi_data_entry(0, 1), + imx31_cspi_data_entry(1, 2), + imx31_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { +#define imx35_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K) + imx35_cspi_data_entry(0, 1), + imx35_cspi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_spi_imx_data imx51_cspi_data __initconst = + imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K); + +const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { +#define imx51_ecspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K) + imx51_ecspi_data_entry(0, 1), + imx51_ecspi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, + const struct spi_imx_master *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device(data->devid, data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c deleted file mode 100644 index e16014b0d13..00000000000 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ /dev/null @@ -1,863 +0,0 @@ -/* - * linux/arch/arm/plat-mxc/dma-mx1-mx2.c - * - * i.MX DMA registration and IRQ dispatching - * - * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de> - * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/scatterlist.h> -#include <linux/io.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma-mx1-mx2.h> - -#define DMA_DCR 0x00 /* Control Register */ -#define DMA_DISR 0x04 /* Interrupt status Register */ -#define DMA_DIMR 0x08 /* Interrupt mask Register */ -#define DMA_DBTOSR 0x0c /* Burst timeout status Register */ -#define DMA_DRTOSR 0x10 /* Request timeout Register */ -#define DMA_DSESR 0x14 /* Transfer Error Status Register */ -#define DMA_DBOSR 0x18 /* Buffer overflow status Register */ -#define DMA_DBTOCR 0x1c /* Burst timeout control Register */ -#define DMA_WSRA 0x40 /* W-Size Register A */ -#define DMA_XSRA 0x44 /* X-Size Register A */ -#define DMA_YSRA 0x48 /* Y-Size Register A */ -#define DMA_WSRB 0x4c /* W-Size Register B */ -#define DMA_XSRB 0x50 /* X-Size Register B */ -#define DMA_YSRB 0x54 /* Y-Size Register B */ -#define DMA_SAR(x) (0x80 + ((x) << 6)) /* Source Address Registers */ -#define DMA_DAR(x) (0x84 + ((x) << 6)) /* Destination Address Registers */ -#define DMA_CNTR(x) (0x88 + ((x) << 6)) /* Count Registers */ -#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */ -#define DMA_RSSR(x) (0x90 + ((x) << 6)) /* Request source select Registers */ -#define DMA_BLR(x) (0x94 + ((x) << 6)) /* Burst length Registers */ -#define DMA_RTOR(x) (0x98 + ((x) << 6)) /* Request timeout Registers */ -#define DMA_BUCR(x) (0x98 + ((x) << 6)) /* Bus Utilization Registers */ -#define DMA_CCNR(x) (0x9C + ((x) << 6)) /* Channel counter Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff) -#define CNTR_CNT(x) ((x) & 0xffffff) -#define CCR_ACRPT (1<<14) -#define CCR_DMOD_LINEAR (0x0 << 12) -#define CCR_DMOD_2D (0x1 << 12) -#define CCR_DMOD_FIFO (0x2 << 12) -#define CCR_DMOD_EOBFIFO (0x3 << 12) -#define CCR_SMOD_LINEAR (0x0 << 10) -#define CCR_SMOD_2D (0x1 << 10) -#define CCR_SMOD_FIFO (0x2 << 10) -#define CCR_SMOD_EOBFIFO (0x3 << 10) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 (0x0 << 6) -#define CCR_DSIZ_8 (0x1 << 6) -#define CCR_DSIZ_16 (0x2 << 6) -#define CCR_SSIZ_32 (0x0 << 4) -#define CCR_SSIZ_8 (0x1 << 4) -#define CCR_SSIZ_16 (0x2 << 4) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void (*prog_handler) (int, void *, struct scatterlist *); - void *data; - unsigned int dma_mode; - struct scatterlist *sg; - unsigned int resbytes; - int dma_num; - - int in_use; - - u32 ccr_from_device; - u32 ccr_to_device; - - struct timer_list watchdog; - - int hw_chaining; -}; - -static void __iomem *imx_dmav1_baseaddr; - -static void imx_dmav1_writel(unsigned val, unsigned offset) -{ - __raw_writel(val, imx_dmav1_baseaddr + offset); -} - -static unsigned imx_dmav1_readl(unsigned offset) -{ - return __raw_readl(imx_dmav1_baseaddr + offset); -} - -static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -static struct clk *dma_clk; - -static int imx_dma_hw_chain(struct imx_dma_channel *imxdma) -{ - if (cpu_is_mx27()) - return imxdma->hw_chaining; - else - return 0; -} - -/* - * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation - */ -static inline int imx_dma_sg_next(int channel, struct scatterlist *sg) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long now; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return 0; - } - - now = min(imxdma->resbytes, sg->length); - if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP) - imxdma->resbytes -= now; - - if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) - imx_dmav1_writel(sg->dma_address, DMA_DAR(channel)); - else - imx_dmav1_writel(sg->dma_address, DMA_SAR(channel)); - - imx_dmav1_writel(now, DMA_CNTR(channel)); - - pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, " - "size 0x%08x\n", channel, - imx_dmav1_readl(DMA_DAR(channel)), - imx_dmav1_readl(DMA_SAR(channel)), - imx_dmav1_readl(DMA_CNTR(channel))); - - return now; -} - -/** - * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from - * device transfer - * - * @channel: i.MX DMA channel number - * @dma_address: the DMA/physical memory address of the linear data block - * to transfer - * @dma_length: length of the data block in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_single(int channel, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - imxdma->sg = NULL; - imxdma->dma_mode = dmamode; - - if (!dma_address) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n", - channel); - return -EINVAL; - } - - if (!dma_length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n", - channel); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " - "dev_addr=0x%08x for read\n", - channel, __func__, (unsigned int)dma_address, - dma_length, dev_addr); - - imx_dmav1_writel(dev_addr, DMA_SAR(channel)); - imx_dmav1_writel(dma_address, DMA_DAR(channel)); - imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d " - "dev_addr=0x%08x for write\n", - channel, __func__, (unsigned int)dma_address, - dma_length, dev_addr); - - imx_dmav1_writel(dma_address, DMA_SAR(channel)); - imx_dmav1_writel(dev_addr, DMA_DAR(channel)); - imx_dmav1_writel(imxdma->ccr_to_device, - DMA_CCR(channel)); - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", - channel); - return -EINVAL; - } - - imx_dmav1_writel(dma_length, DMA_CNTR(channel)); - - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_single); - -/** - * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer - * @channel: i.MX DMA channel number - * @sg: pointer to the scatter-gather list/vector - * @sgcount: scatter-gather list hungs count - * @dma_length: total length of the transfer request in bytes - * @dev_addr: physical device port address - * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory - * or %DMA_MODE_WRITE from memory to the device - * - * The function sets up DMA channel state and registers to be ready for - * transfer specified by provided parameters. The scatter-gather emulation - * is set up according to the parameters. - * - * The full preparation of the transfer requires setup of more register - * by the caller before imx_dma_enable() can be called. - * - * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes - * - * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx - * - * %CCR(channel) has to specify transfer parameters, the next settings is - * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is - * specified - * - * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x - * - * The typical setup for %DMA_MODE_WRITE is specified by next options - * combination - * - * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x - * - * Be careful here and do not mistakenly mix source and target device - * port sizes constants, they are really different: - * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, - * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 - * - * Return value: if incorrect parameters are provided -%EINVAL. - * Zero indicates success. - */ -int -imx_dma_setup_sg(int channel, - struct scatterlist *sg, unsigned int sgcount, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - if (imxdma->in_use) - return -EBUSY; - - imxdma->sg = sg; - imxdma->dma_mode = dmamode; - imxdma->resbytes = dma_length; - - if (!sg || !sgcount) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n", - channel); - return -EINVAL; - } - - if (!sg->length) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n", - channel); - return -EINVAL; - } - - if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { - pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " - "dev_addr=0x%08x for read\n", - channel, __func__, sg, sgcount, dma_length, dev_addr); - - imx_dmav1_writel(dev_addr, DMA_SAR(channel)); - imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel)); - } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { - pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d " - "dev_addr=0x%08x for write\n", - channel, __func__, sg, sgcount, dma_length, dev_addr); - - imx_dmav1_writel(dev_addr, DMA_DAR(channel)); - imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel)); - } else { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", - channel); - return -EINVAL; - } - - imx_dma_sg_next(channel, sg); - - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_sg); - -int -imx_dma_config_channel(int channel, unsigned int config_port, - unsigned int config_mem, unsigned int dmareq, int hw_chaining) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - u32 dreq = 0; - - imxdma->hw_chaining = 0; - - if (hw_chaining) { - imxdma->hw_chaining = 1; - if (!imx_dma_hw_chain(imxdma)) - return -EINVAL; - } - - if (dmareq) - dreq = CCR_REN; - - imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq; - imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq; - - imx_dmav1_writel(dmareq, DMA_RSSR(channel)); - - return 0; -} -EXPORT_SYMBOL(imx_dma_config_channel); - -void imx_dma_config_burstlen(int channel, unsigned int burstlen) -{ - imx_dmav1_writel(burstlen, DMA_BLR(channel)); -} -EXPORT_SYMBOL(imx_dma_config_burstlen); - -/** - * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification - * handlers - * @channel: i.MX DMA channel number - * @irq_handler: the pointer to the function called if the transfer - * ends successfully - * @err_handler: the pointer to the function called if the premature - * end caused by error occurs - * @data: user specified value to be passed to the handlers - */ -int -imx_dma_setup_handlers(int channel, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), - void *data) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return -ENODEV; - } - - local_irq_save(flags); - imx_dmav1_writel(1 << channel, DMA_DISR); - imxdma->irq_handler = irq_handler; - imxdma->err_handler = err_handler; - imxdma->data = data; - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_handlers); - -/** - * imx_dma_setup_progression_handler - setup i.MX DMA channel progression - * handlers - * @channel: i.MX DMA channel number - * @prog_handler: the pointer to the function called if the transfer progresses - */ -int -imx_dma_setup_progression_handler(int channel, - void (*prog_handler) (int, void*, struct scatterlist*)) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return -ENODEV; - } - - local_irq_save(flags); - imxdma->prog_handler = prog_handler; - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(imx_dma_setup_progression_handler); - -/** - * imx_dma_enable - function to start i.MX DMA channel operation - * @channel: i.MX DMA channel number - * - * The channel has to be allocated by driver through imx_dma_request() - * or imx_dma_request_by_prio() function. - * The transfer parameters has to be set to the channel registers through - * call of the imx_dma_setup_single() or imx_dma_setup_sg() function - * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to - * be set prior this function call by the channel user. - */ -void imx_dma_enable(int channel) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_enable\n", channel); - - if (!imxdma->name) { - printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __func__, channel); - return; - } - - if (imxdma->in_use) - return; - - local_irq_save(flags); - - imx_dmav1_writel(1 << channel, DMA_DISR); - imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR); - imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN | - CCR_ACRPT, DMA_CCR(channel)); - -#ifdef CONFIG_ARCH_MX2 - if ((cpu_is_mx21() || cpu_is_mx27()) && - imxdma->sg && imx_dma_hw_chain(imxdma)) { - imxdma->sg = sg_next(imxdma->sg); - if (imxdma->sg) { - u32 tmp; - imx_dma_sg_next(channel, imxdma->sg); - tmp = imx_dmav1_readl(DMA_CCR(channel)); - imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT, - DMA_CCR(channel)); - } - } -#endif - imxdma->in_use = 1; - - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_enable); - -/** - * imx_dma_disable - stop, finish i.MX DMA channel operatin - * @channel: i.MX DMA channel number - */ -void imx_dma_disable(int channel) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - - pr_debug("imxdma%d: imx_dma_disable\n", channel); - - if (imx_dma_hw_chain(imxdma)) - del_timer(&imxdma->watchdog); - - local_irq_save(flags); - imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR); - imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN, - DMA_CCR(channel)); - imx_dmav1_writel(1 << channel, DMA_DISR); - imxdma->in_use = 0; - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_disable); - -#ifdef CONFIG_ARCH_MX2 -static void imx_dma_watchdog(unsigned long chno) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - - imx_dmav1_writel(0, DMA_CCR(chno)); - imxdma->in_use = 0; - imxdma->sg = NULL; - - if (imxdma->err_handler) - imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT); -} -#endif - -static irqreturn_t dma_err_handler(int irq, void *dev_id) -{ - int i, disr; - struct imx_dma_channel *imxdma; - unsigned int err_mask; - int errcode; - - disr = imx_dmav1_readl(DMA_DISR); - - err_mask = imx_dmav1_readl(DMA_DBTOSR) | - imx_dmav1_readl(DMA_DRTOSR) | - imx_dmav1_readl(DMA_DSESR) | - imx_dmav1_readl(DMA_DBOSR); - - if (!err_mask) - return IRQ_HANDLED; - - imx_dmav1_writel(disr & err_mask, DMA_DISR); - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (!(err_mask & (1 << i))) - continue; - imxdma = &imx_dma_channels[i]; - errcode = 0; - - if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DBTOSR); - errcode |= IMX_DMA_ERR_BURST; - } - if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DRTOSR); - errcode |= IMX_DMA_ERR_REQUEST; - } - if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DSESR); - errcode |= IMX_DMA_ERR_TRANSFER; - } - if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) { - imx_dmav1_writel(1 << i, DMA_DBOSR); - errcode |= IMX_DMA_ERR_BUFFER; - } - if (imxdma->name && imxdma->err_handler) { - imxdma->err_handler(i, imxdma->data, errcode); - continue; - } - - imx_dma_channels[i].sg = NULL; - - printk(KERN_WARNING - "DMA timeout on channel %d (%s) -%s%s%s%s\n", - i, imxdma->name, - errcode & IMX_DMA_ERR_BURST ? " burst" : "", - errcode & IMX_DMA_ERR_REQUEST ? " request" : "", - errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "", - errcode & IMX_DMA_ERR_BUFFER ? " buffer" : ""); - } - return IRQ_HANDLED; -} - -static void dma_irq_handle_channel(int chno) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; - - if (!imxdma->name) { - /* - * IRQ for an unregistered DMA channel: - * let's clear the interrupts and disable it. - */ - printk(KERN_WARNING - "spurious IRQ for DMA channel %d\n", chno); - return; - } - - if (imxdma->sg) { - u32 tmp; - struct scatterlist *current_sg = imxdma->sg; - imxdma->sg = sg_next(imxdma->sg); - - if (imxdma->sg) { - imx_dma_sg_next(chno, imxdma->sg); - - tmp = imx_dmav1_readl(DMA_CCR(chno)); - - if (imx_dma_hw_chain(imxdma)) { - /* FIXME: The timeout should probably be - * configurable - */ - mod_timer(&imxdma->watchdog, - jiffies + msecs_to_jiffies(500)); - - tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT; - imx_dmav1_writel(tmp, DMA_CCR(chno)); - } else { - imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno)); - tmp |= CCR_CEN; - } - - imx_dmav1_writel(tmp, DMA_CCR(chno)); - - if (imxdma->prog_handler) - imxdma->prog_handler(chno, imxdma->data, - current_sg); - - return; - } - - if (imx_dma_hw_chain(imxdma)) { - del_timer(&imxdma->watchdog); - return; - } - } - - imx_dmav1_writel(0, DMA_CCR(chno)); - imxdma->in_use = 0; - if (imxdma->irq_handler) - imxdma->irq_handler(chno, imxdma->data); -} - -static irqreturn_t dma_irq_handler(int irq, void *dev_id) -{ - int i, disr; - -#ifdef CONFIG_ARCH_MX2 - if (cpu_is_mx21() || cpu_is_mx27()) - dma_err_handler(irq, dev_id); -#endif - - disr = imx_dmav1_readl(DMA_DISR); - - pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", - disr); - - imx_dmav1_writel(disr, DMA_DISR); - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - if (disr & (1 << i)) - dma_irq_handle_channel(i); - } - - return IRQ_HANDLED; -} - -/** - * imx_dma_request - request/allocate specified channel number - * @channel: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - */ -int imx_dma_request(int channel, const char *name) -{ - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - unsigned long flags; - int ret = 0; - - /* basic sanity checks */ - if (!name) - return -EINVAL; - - if (channel >= IMX_DMA_CHANNELS) { - printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __func__, channel); - return -EINVAL; - } - - local_irq_save(flags); - if (imxdma->name) { - local_irq_restore(flags); - return -EBUSY; - } - memset(imxdma, 0, sizeof(imxdma)); - imxdma->name = name; - local_irq_restore(flags); /* request_irq() can block */ - -#ifdef CONFIG_ARCH_MX2 - if (cpu_is_mx21() || cpu_is_mx27()) { - ret = request_irq(MX2x_INT_DMACH0 + channel, - dma_irq_handler, 0, "DMA", NULL); - if (ret) { - imxdma->name = NULL; - pr_crit("Can't register IRQ %d for DMA channel %d\n", - MX2x_INT_DMACH0 + channel, channel); - return ret; - } - init_timer(&imxdma->watchdog); - imxdma->watchdog.function = &imx_dma_watchdog; - imxdma->watchdog.data = channel; - } -#endif - - return ret; -} -EXPORT_SYMBOL(imx_dma_request); - -/** - * imx_dma_free - release previously acquired channel - * @channel: i.MX DMA channel number - */ -void imx_dma_free(int channel) -{ - unsigned long flags; - struct imx_dma_channel *imxdma = &imx_dma_channels[channel]; - - if (!imxdma->name) { - printk(KERN_CRIT - "%s: trying to free free channel %d\n", - __func__, channel); - return; - } - - local_irq_save(flags); - /* Disable interrupts */ - imx_dma_disable(channel); - imxdma->name = NULL; - -#ifdef CONFIG_ARCH_MX2 - if (cpu_is_mx21() || cpu_is_mx27()) - free_irq(MX2x_INT_DMACH0 + channel, NULL); -#endif - - local_irq_restore(flags); -} -EXPORT_SYMBOL(imx_dma_free); - -/** - * imx_dma_request_by_prio - find and request some of free channels best - * suiting requested priority - * @channel: i.MX DMA channel number - * @name: the driver/caller own non-%NULL identification - * - * This function tries to find a free channel in the specified priority group - * This function tries to find a free channel in the specified priority group - * if the priority cannot be achieved it tries to look for free channel - * in the higher and then even lower priority groups. - * - * Return value: If there is no free channel to allocate, -%ENODEV is returned. - * On successful allocation channel is returned. - */ -int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio) -{ - int i; - int best; - - switch (prio) { - case (DMA_PRIO_HIGH): - best = 8; - break; - case (DMA_PRIO_MEDIUM): - best = 4; - break; - case (DMA_PRIO_LOW): - default: - best = 0; - break; - } - - for (i = best; i < IMX_DMA_CHANNELS; i++) - if (!imx_dma_request(i, name)) - return i; - - for (i = best - 1; i >= 0; i--) - if (!imx_dma_request(i, name)) - return i; - - printk(KERN_ERR "%s: no free DMA channel found\n", __func__); - - return -ENODEV; -} -EXPORT_SYMBOL(imx_dma_request_by_prio); - -static int __init imx_dma_init(void) -{ - int ret = 0; - int i; - -#ifdef CONFIG_ARCH_MX1 - if (cpu_is_mx1()) - imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); - else -#endif -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) - imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); - else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); - else -#endif - BUG(); - - dma_clk = clk_get(NULL, "dma"); - clk_enable(dma_clk); - - /* reset DMA module */ - imx_dmav1_writel(DCR_DRST, DMA_DCR); - -#ifdef CONFIG_ARCH_MX1 - if (cpu_is_mx1()) { - ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL); - if (ret) { - pr_crit("Wow! Can't register IRQ for DMA\n"); - return ret; - } - - ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL); - if (ret) { - pr_crit("Wow! Can't register ERRIRQ for DMA\n"); - free_irq(MX1_DMA_INT, NULL); - return ret; - } - } -#endif - /* enable DMA module */ - imx_dmav1_writel(DCR_DEN, DMA_DCR); - - /* clear all interrupts */ - imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR); - - /* disable interrupts */ - imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR); - - for (i = 0; i < IMX_DMA_CHANNELS; i++) { - imx_dma_channels[i].sg = NULL; - imx_dma_channels[i].dma_num = i; - } - - return ret; -} - -arch_initcall(imx_dma_init); diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 2a8646173c2..9915607683d 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -11,10 +11,6 @@ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/platform_device.h> @@ -73,7 +69,51 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) { unsigned int v; -#ifdef CONFIG_ARCH_MX3 +#if defined(CONFIG_ARCH_MX25) + if (cpu_is_mx25()) { + v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_OTG_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | + MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX35_H1_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX35_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX35_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX35_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX35_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } +#endif /* CONFIG_ARCH_MX25 */ +#if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) { v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); @@ -209,8 +249,8 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) #ifdef CONFIG_ARCH_MX51 if (cpu_is_mx51()) { void __iomem *usb_base; - u32 usbotg_base; - u32 usbother_base; + void __iomem *usbotg_base; + void __iomem *usbother_base; int ret = 0; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c new file mode 100644 index 00000000000..ee9582f4972 --- /dev/null +++ b/arch/arm/plat-mxc/epit.c @@ -0,0 +1,242 @@ +/* + * linux/arch/arm/plat-mxc/epit.c + * + * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define EPITCR 0x00 +#define EPITSR 0x04 +#define EPITLR 0x08 +#define EPITCMPR 0x0c +#define EPITCNR 0x10 + +#define EPITCR_EN (1 << 0) +#define EPITCR_ENMOD (1 << 1) +#define EPITCR_OCIEN (1 << 2) +#define EPITCR_RLD (1 << 3) +#define EPITCR_PRESC(x) (((x) & 0xfff) << 4) +#define EPITCR_SWR (1 << 16) +#define EPITCR_IOVW (1 << 17) +#define EPITCR_DBGEN (1 << 18) +#define EPITCR_WAITEN (1 << 19) +#define EPITCR_RES (1 << 20) +#define EPITCR_STOPEN (1 << 21) +#define EPITCR_OM_DISCON (0 << 22) +#define EPITCR_OM_TOGGLE (1 << 22) +#define EPITCR_OM_CLEAR (2 << 22) +#define EPITCR_OM_SET (3 << 22) +#define EPITCR_CLKSRC_OFF (0 << 24) +#define EPITCR_CLKSRC_PERIPHERAL (1 << 24) +#define EPITCR_CLKSRC_REF_HIGH (1 << 24) +#define EPITCR_CLKSRC_REF_LOW (3 << 24) + +#define EPITSR_OCIF (1 << 0) + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clk.h> + +#include <mach/hardware.h> +#include <asm/mach/time.h> +#include <mach/common.h> + +static struct clock_event_device clockevent_epit; +static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +static void __iomem *timer_base; + +static inline void epit_irq_disable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val &= ~EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static inline void epit_irq_enable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val |= EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static void epit_irq_acknowledge(void) +{ + __raw_writel(EPITSR_OCIF, timer_base + EPITSR); +} + +static cycle_t epit_read(struct clocksource *cs) +{ + return 0 - __raw_readl(timer_base + EPITCNR); +} + +static struct clocksource clocksource_epit = { + .name = "epit", + .rating = 200, + .read = epit_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init epit_clocksource_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + clocksource_epit.mult = clocksource_hz2mult(c, + clocksource_epit.shift); + clocksource_register(&clocksource_epit); + + return 0; +} + +/* clock event */ + +static int epit_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + EPITCNR); + + __raw_writel(tcmp - evt, timer_base + EPITCMPR); + + return 0; +} + +static void epit_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call epit_set_next_event() + */ + local_irq_save(flags); + + /* Disable interrupt in GPT module */ + epit_irq_disable(); + + if (mode != clockevent_mode) { + /* Set event time into far-far future */ + + /* Clear pending interrupt */ + epit_irq_acknowledge(); + } + + /* Remember timer mode */ + clockevent_mode = mode; + local_irq_restore(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_ERR "epit_set_mode: Periodic mode is not " + "supported for i.MX EPIT\n"); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* + * Do not put overhead of interrupt enable/disable into + * epit_set_next_event(), the core has about 4 minutes + * to call epit_set_next_event() or shutdown clock after + * mode switching + */ + local_irq_save(flags); + epit_irq_enable(); + local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t epit_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_epit; + + epit_irq_acknowledge(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction epit_timer_irq = { + .name = "i.MX EPIT Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = epit_timer_interrupt, +}; + +static struct clock_event_device clockevent_epit = { + .name = "epit", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = epit_set_mode, + .set_next_event = epit_set_next_event, + .rating = 200, +}; + +static int __init epit_clockevent_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + clockevent_epit.mult = div_sc(c, NSEC_PER_SEC, + clockevent_epit.shift); + clockevent_epit.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_epit); + clockevent_epit.min_delta_ns = + clockevent_delta2ns(0x800, &clockevent_epit); + + clockevent_epit.cpumask = cpumask_of(0); + + clockevents_register_device(&clockevent_epit); + + return 0; +} + +void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +{ + clk_enable(timer_clk); + + timer_base = base; + + /* + * Initialise to a known state (all timers off, and timing reset) + */ + __raw_writel(0x0, timer_base + EPITCR); + + __raw_writel(0xffffffff, timer_base + EPITLR); + __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, + timer_base + EPITCR); + + /* init and register the timer to the framework */ + epit_clocksource_init(timer_clk); + epit_clockevent_init(timer_clk); + + /* Make irqs happen */ + setup_irq(irq, &epit_timer_irq); +} diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 71437c61cfd..9c3e36232b5 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -20,6 +20,7 @@ */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/gpio.h> @@ -201,11 +202,42 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) } } +/* + * Set interrupt number "irq" in the GPIO as a wake-up source. + * While system is running, all registered GPIO interrupts need to have + * wake-up enabled. When system is suspended, only selected GPIO interrupts + * need to have wake-up enabled. + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * @return This function returns 0 on success. + */ +static int gpio_set_wake_irq(u32 irq, u32 enable) +{ + u32 gpio = irq_to_gpio(irq); + u32 gpio_idx = gpio & 0x1F; + struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; + + if (enable) { + if (port->irq_high && (gpio_idx >= 16)) + enable_irq_wake(port->irq_high); + else + enable_irq_wake(port->irq); + } else { + if (port->irq_high && (gpio_idx >= 16)) + disable_irq_wake(port->irq_high); + else + disable_irq_wake(port->irq); + } + + return 0; +} + static struct irq_chip gpio_irq_chip = { .ack = gpio_ack_irq, .mask = gpio_mask_irq, .unmask = gpio_unmask_irq, .set_type = gpio_set_irq_type, + .set_wake = gpio_set_wake_irq, }; static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, @@ -214,13 +246,16 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, struct mxc_gpio_port *port = container_of(chip, struct mxc_gpio_port, chip); u32 l; + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); l = __raw_readl(port->base + GPIO_GDIR); if (dir) l |= 1 << offset; else l &= ~(1 << offset); __raw_writel(l, port->base + GPIO_GDIR); + spin_unlock_irqrestore(&port->lock, flags); } static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) @@ -229,9 +264,12 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) container_of(chip, struct mxc_gpio_port, chip); void __iomem *reg = port->base + GPIO_DR; u32 l; + unsigned long flags; - l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset); + spin_lock_irqsave(&port->lock, flags); + l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); __raw_writel(l, reg); + spin_unlock_irqrestore(&port->lock, flags); } static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) @@ -285,6 +323,8 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) port[i].chip.base = i * 32; port[i].chip.ngpio = 32; + spin_lock_init(&port[i].lock); + /* its a serious configuration bug when it fails */ BUG_ON( gpiochip_add(&port[i].chip) < 0 ); @@ -292,6 +332,12 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) /* setup one handler for each entry */ set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); set_irq_data(port[i].irq, &port[i]); + if (port[i].irq_high) { + /* setup handler for GPIO 16 to 31 */ + set_irq_chained_handler(port[i].irq_high, + mx3_gpio_irq_handler); + set_irq_data(port[i].irq_high, &port[i]); + } } } diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h new file mode 100644 index 00000000000..a384fdd49c6 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h @@ -0,0 +1,18 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_3DS_DB_H__ +#define __ASM_ARCH_MXC_3DS_DB_H__ + +extern int __init mxc_expio_init(u32 base, u32 p_irq); + +#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h deleted file mode 100644 index 0376c133c9f..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>. - * All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ -#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__ - -#endif diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h deleted file mode 100644 index 93cc66f104c..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - */ -#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H -#define __ARM_ARCH_BOARD_KZM_ARM11_H - -/* - * KZM-ARM11-01 Board Control Registers on FPGA - */ -#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000) -#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001) -#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002) -#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004) -#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008) -#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010) -#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020) -#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003) - -/* - * External UART for touch panel on FPGA - */ -#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) - -#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */ - diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h deleted file mode 100644 index 0cf4fa29510..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__ - -/* - * Memory-mapped I/O on MX21ADS base board - */ -#define MX21ADS_MMIO_BASE_ADDR 0xF5000000 -#define MX21ADS_MMIO_SIZE SZ_16M - -#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ - (MX21ADS_MMIO_BASE_ADDR + (offset)) - -#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) -#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) -#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) -#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) -#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) - -/* MX21ADS_IO_REG bit definitions */ -#define MX21ADS_IO_SD_WP 0x0001 /* read */ -#define MX21ADS_IO_TP6 0x0001 /* write */ -#define MX21ADS_IO_SW_SEL 0x0002 /* read */ -#define MX21ADS_IO_TP7 0x0002 /* write */ -#define MX21ADS_IO_RESET_E_UART 0x0004 -#define MX21ADS_IO_RESET_BASE 0x0008 -#define MX21ADS_IO_CSI_CTL2 0x0010 -#define MX21ADS_IO_CSI_CTL1 0x0020 -#define MX21ADS_IO_CSI_CTL0 0x0040 -#define MX21ADS_IO_UART1_EN 0x0080 -#define MX21ADS_IO_UART4_EN 0x0100 -#define MX21ADS_IO_LCDON 0x0200 -#define MX21ADS_IO_IRDA_EN 0x0400 -#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 -#define MX21ADS_IO_IRDA_MD0_B 0x1000 -#define MX21ADS_IO_IRDA_MD1 0x2000 -#define MX21ADS_IO_LED4_ON 0x4000 -#define MX21ADS_IO_LED3_ON 0x8000 - -#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h deleted file mode 100644 index 7776d230327..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ /dev/null @@ -1,344 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__ - -/* external interrupt multiplexer */ -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) - -#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) -#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE -#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) -#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) - -#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -/* - * @name Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M - -/* - * PBC Controller parameters - */ - -/* - * Base address of PBC controller, CS4 - */ -#define PBC_BASE_ADDRESS 0xf4300000 -#define PBC_REG_ADDR(offset) (void __force __iomem *) \ - (PBC_BASE_ADDRESS + (offset)) - -/* - * PBC Interupt name definitions - */ -#define PBC_GPIO1_0 0 -#define PBC_GPIO1_1 1 -#define PBC_GPIO1_2 2 -#define PBC_GPIO1_3 3 -#define PBC_GPIO1_4 4 -#define PBC_GPIO1_5 5 - -#define PBC_INTR_MAX_NUM 6 -#define PBC_INTR_SHARED_MAX_NUM 8 - -/* When the PBC address connection is fixed in h/w, defined as 1 */ -#define PBC_ADDR_SH 0 - -/* Offsets for the PBC Controller register */ -/* - * PBC Board version register offset - */ -#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 set address. - */ -#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 clear address. - */ -#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) -/* - * PBC Board control register 2 set address. - */ -#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH) -/* - * PBC Board control register 2 clear address. - */ -#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 clear address. - */ -#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH) -/* - * PBC Board control register 4 clear address. - */ -#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH) -/*PBC_ADDR_SH - * PBC Board status register 1. - */ -#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH) -/* - * PBC Board interrupt status register. - */ -#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH) -/* - * PBC Board interrupt current status register. - */ -#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register set address. - */ -#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register clear address. - */ -#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH) -/* - * External UART A. - */ -#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Status. - */ -#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Set. - */ -#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Clear. - */ -#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH) -/* - * Ethernet Controller IO base address. - */ -#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH) -/* - * Ethernet Controller Memory base address. - */ -#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH) -/* - * Ethernet Controller DMA base address. - */ -#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH) - -/* PBC Board Version Register bit definition */ -#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */ -#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */ - -/* PBC Board Control Register 1 bit definitions */ -#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */ -#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */ -#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */ -#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */ -#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ - -/* PBC Board Control Register 2 bit definitions */ -#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */ -#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */ -#define PBC_BCTRL2_ATAFEC_EN 0X0010 -#define PBC_BCTRL2_ATAFEC_SEL 0X0020 -#define PBC_BCTRL2_ATA_EN 0X0040 -#define PBC_BCTRL2_IRDA_SD 0X0080 -#define PBC_BCTRL2_IRDA_EN 0X0100 -#define PBC_BCTRL2_CCTL10 0X0200 -#define PBC_BCTRL2_CCTL11 0X0400 - -/* PBC Board Control Register 3 bit definitions */ -#define PBC_BCTRL3_HSH_EN 0X0020 -#define PBC_BCTRL3_FSH_MOD 0X0040 -#define PBC_BCTRL3_OTG_HS_EN 0X0080 -#define PBC_BCTRL3_OTG_VBUS_EN 0X0100 -#define PBC_BCTRL3_FSH_VBUS_EN 0X0200 -#define PBC_BCTRL3_USB_OTG_ON 0X0800 -#define PBC_BCTRL3_USB_FSH_ON 0X1000 - -/* PBC Board Control Register 4 bit definitions */ -#define PBC_BCTRL4_REGEN_SEL 0X0001 -#define PBC_BCTRL4_USER_OFF 0X0002 -#define PBC_BCTRL4_VIB_EN 0X0004 -#define PBC_BCTRL4_PWRGT1_EN 0X0008 -#define PBC_BCTRL4_PWRGT2_EN 0X0010 -#define PBC_BCTRL4_STDBY_PRI 0X0020 - -#ifndef __ASSEMBLY__ -/* - * Enumerations for SD cards and memory stick card. This corresponds to - * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN. - */ -enum mxc_card_no { - MXC_CARD_SD2 = 0, - MXC_CARD_SD3, - MXC_CARD_MS, - MXC_CARD_SD1, - MXC_CARD_MIN = MXC_CARD_SD2, - MXC_CARD_MAX = MXC_CARD_SD1, -}; -#endif - -#define MXC_CPLD_VER_1_50 0x01 - -/* - * PBC BSTAT Register bit definitions - */ -#define PBC_BSTAT_PRI_INT 0X0001 -#define PBC_BSTAT_USB_BYP 0X0002 -#define PBC_BSTAT_ATA_IOCS16 0X0004 -#define PBC_BSTAT_ATA_CBLID 0X0008 -#define PBC_BSTAT_ATA_DASP 0X0010 -#define PBC_BSTAT_PWR_RDY 0X0020 -#define PBC_BSTAT_SD3_WP 0X0100 -#define PBC_BSTAT_SD2_WP 0X0200 -#define PBC_BSTAT_SD1_WP 0X0400 -#define PBC_BSTAT_SD3_DET 0X0800 -#define PBC_BSTAT_SD2_DET 0X1000 -#define PBC_BSTAT_SD1_DET 0X2000 -#define PBC_BSTAT_MS_DET 0X4000 -#define PBC_BSTAT_SD3_DET_BIT 11 -#define PBC_BSTAT_SD2_DET_BIT 12 -#define PBC_BSTAT_SD1_DET_BIT 13 -#define PBC_BSTAT_MS_DET_BIT 14 -#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \ - ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \ - ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \ - ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \ - 0x0)))) - -/* - * PBC UART Control Register bit definitions - */ -#define PBC_UCTRL_DCE_DCD 0X0001 -#define PBC_UCTRL_DCE_DSR 0X0002 -#define PBC_UCTRL_DCE_RI 0X0004 -#define PBC_UCTRL_DTE_DTR 0X0100 - -/* - * PBC UART Status Register bit definitions - */ -#define PBC_USTAT_DTE_DCD 0X0001 -#define PBC_USTAT_DTE_DSR 0X0002 -#define PBC_USTAT_DTE_RI 0X0004 -#define PBC_USTAT_DCE_DTR 0X0100 - -/* - * PBC Interupt mask register bit definitions - */ -#define PBC_INTR_SD3_R_EN_BIT 4 -#define PBC_INTR_SD2_R_EN_BIT 0 -#define PBC_INTR_SD1_R_EN_BIT 6 -#define PBC_INTR_MS_R_EN_BIT 5 -#define PBC_INTR_SD3_EN_BIT 13 -#define PBC_INTR_SD2_EN_BIT 12 -#define PBC_INTR_MS_EN_BIT 14 -#define PBC_INTR_SD1_EN_BIT 15 - -#define PBC_INTR_SD2_R_EN 0x0001 -#define PBC_INTR_LOW_BAT 0X0002 -#define PBC_INTR_OTG_FSOVER 0X0004 -#define PBC_INTR_FSH_OVER 0X0008 -#define PBC_INTR_SD3_R_EN 0x0010 -#define PBC_INTR_MS_R_EN 0x0020 -#define PBC_INTR_SD1_R_EN 0x0040 -#define PBC_INTR_FEC_INT 0X0080 -#define PBC_INTR_ENET_INT 0X0100 -#define PBC_INTR_OTGFS_INT 0X0200 -#define PBC_INTR_XUART_INT 0X0400 -#define PBC_INTR_CCTL12 0X0800 -#define PBC_INTR_SD2_EN 0x1000 -#define PBC_INTR_SD3_EN 0x2000 -#define PBC_INTR_MS_EN 0x4000 -#define PBC_INTR_SD1_EN 0x8000 - - - -/* For interrupts like xuart, enet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN) -#define MXC_MAX_EXP_IO_LINES 16 - -/* - * This corresponds to PBC_INTMASK_SET_REG at offset 0x38. - * - */ -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15) - -/* - * This is System IRQ used by CS8900A for interrupt generation - * taken from platform.h - */ -#define CS8900AIRQ EXPIO_INT_ENET_INT -/* This is I/O Base address used to access registers of CS8900A on MXC ADS */ -#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300) - -#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT) - -/* -* This is used to detect if the CPLD version is for mx27 evb board rev-a -*/ -#define PBC_CPLD_VERSION_IS_REVA() \ - ((__raw_readw(PBC_VERSION_REG) & \ - (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\ - == 0) - -/* This is used to active or inactive ata signal in CPLD . - * It is dependent with hardware - */ -#define PBC_ATA_SIGNAL_ACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_CLEAR_REG) - -#define PBC_ATA_SIGNAL_INACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_SET_REG) - -#define MXC_BD_LED1 (1 << 5) -#define MXC_BD_LED2 (1 << 6) -#define MXC_BD_LED_ON(led) \ - __raw_writew(led, PBC_BCTRL1_SET_REG) -#define MXC_BD_LED_OFF(led) \ - __raw_writew(led, PBC_BCTRL1_CLEAR_REG) - -/* to determine the correct external crystal reference */ -#define CKIH_27MHZ_BIT_SET (1 << 3) - -#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h deleted file mode 100644 index ea87551d273..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__ -#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h deleted file mode 100644 index fec1bcfa916..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h deleted file mode 100644 index da92933a233..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ - -/* Definitions for components on the Debug board */ - -/* Base address of CPLD controller on the Debug board */ -#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR) - -/* LAN9217 ethernet base address */ -#define LAN9217_BASE_ADDR CS5_BASE_ADDR - -/* CPLD config and interrupt base address */ -#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000) - -/* LED switchs */ -#define CPLD_LED_REG (CPLD_ADDR + 0x00) -/* buttons */ -#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08) -/* status, interrupt */ -#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10) -#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38) -#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20) -/* magic word for debug CPLD */ -#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40) -#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48) -/* CPLD code version */ -#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50) -/* magic word for debug CPLD */ -#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58) -/* module reset register */ -#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60) -/* CPU ID and Personality ID */ -#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68) - -/* CPLD IRQ line for external uart, external ethernet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0) -#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4) - -#define MXC_MAX_EXP_IO_LINES 16 - -#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h index 095a199591c..94b60dd4713 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h @@ -13,105 +13,21 @@ #include <mach/hardware.h> +/* + * These symbols are used by drivers/net/cs89x0.c. + * This is ugly as hell, but we have to provide them until + * someone fixed the driver. + */ + /* Base address of PBC controller */ #define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT /* Offsets for the PBC Controller register */ -/* PBC Board status register offset */ -#define PBC_BSTAT 0x000002 - -/* PBC Board control register 1 set address */ -#define PBC_BCTRL1_SET 0x000004 - -/* PBC Board control register 1 clear address */ -#define PBC_BCTRL1_CLEAR 0x000006 - -/* PBC Board control register 2 set address */ -#define PBC_BCTRL2_SET 0x000008 - -/* PBC Board control register 2 clear address */ -#define PBC_BCTRL2_CLEAR 0x00000A - -/* PBC Board control register 3 set address */ -#define PBC_BCTRL3_SET 0x00000C - -/* PBC Board control register 3 clear address */ -#define PBC_BCTRL3_CLEAR 0x00000E - -/* PBC Board control register 4 set address */ -#define PBC_BCTRL4_SET 0x000010 - -/* PBC Board control register 4 clear address */ -#define PBC_BCTRL4_CLEAR 0x000012 - -/* PBC Board status register 1 */ -#define PBC_BSTAT1 0x000014 - -/* PBC Board interrupt status register */ -#define PBC_INTSTATUS 0x000016 - -/* PBC Board interrupt current status register */ -#define PBC_INTCURR_STATUS 0x000018 - -/* PBC Interrupt mask register set address */ -#define PBC_INTMASK_SET 0x00001A - -/* PBC Interrupt mask register clear address */ -#define PBC_INTMASK_CLEAR 0x00001C - -/* External UART A */ -#define PBC_SC16C652_UARTA 0x010000 - -/* External UART B */ -#define PBC_SC16C652_UARTB 0x010010 - /* Ethernet Controller IO base address */ #define PBC_CS8900A_IOBASE 0x020000 -/* Ethernet Controller Memory base address */ -#define PBC_CS8900A_MEMBASE 0x021000 - -/* Ethernet Controller DMA base address */ -#define PBC_CS8900A_DMABASE 0x022000 - -/* External chip select 0 */ -#define PBC_XCS0 0x040000 - -/* LCD Display enable */ -#define PBC_LCD_EN_B 0x060000 - -/* Code test debug enable */ -#define PBC_CODE_B 0x070000 - -/* PSRAM memory select */ -#define PBC_PSRAM_B 0x5000000 - -#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) -#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS) -#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) -#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) - #define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0) -#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7) #define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15) - -#define MXC_MAX_EXP_IO_LINES 16 #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h index eb5a5024622..0df71bfefbb 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h @@ -31,7 +31,7 @@ enum mx31lilly_boards { /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. */ extern void mx31lilly_db_init(void); diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h index 2b2da036757..c1ad0ae807c 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h @@ -32,7 +32,7 @@ enum mx31lite_boards { /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. */ extern void mx31lite_db_init(void); diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index 36ff3cedee1..de14543891c 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -31,7 +31,7 @@ enum mx31moboard_boards { /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. */ extern void mx31moboard_devboard_init(void); diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h deleted file mode 100644 index 383f1c04df0..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h deleted file mode 100644 index 13411709b13..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-pcm037.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ -#define __ASM_ARCH_MXC_BOARD_PCM037_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h index 410f9786ed2..6f371e35753 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm038.h +++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h @@ -22,7 +22,7 @@ #ifndef __ASSEMBLY__ /* * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. + * its own devices, it calls the baseboard's init function. * TODO: Add your own baseboard init function and call it from * inside pcm038_init(). * diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h deleted file mode 100644 index 1ac4e1682e5..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-pcm043.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__ -#define __ASM_ARCH_MXC_BOARD_PCM043_H__ - -#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h deleted file mode 100644 index 6d88c7af4b2..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-qong.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__ -#define __ASM_ARCH_MXC_BOARD_QONG_H__ - -/* NOR FLASH */ -#define QONG_NOR_SIZE (128*1024*1024) - -#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 2941472582d..7a1e1f89ff0 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -32,6 +32,7 @@ extern void mx31_init_irq(void); extern void mx35_init_irq(void); extern void mx51_init_irq(void); extern void mxc91231_init_irq(void); +extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 0b6e11eaeb8..d56213fb901 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -23,8 +23,8 @@ #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #include <mach/mx25.h> -#define UART_PADDR UART1_BASE_ADDR -#define UART_VADDR MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR) +#define UART_PADDR MX25_UART1_BASE_ADDR +#define UART_VADDR MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR) #endif #ifdef CONFIG_ARCH_MX2 @@ -62,11 +62,9 @@ #define UART_PADDR MXC91231_UART2_BASE_ADDR #define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) #endif - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =UART_PADDR @ physical - ldrne \rx, =UART_VADDR @ virtual + .macro addruart, rp, rv + ldr \rp, =UART_PADDR @ physical + ldr \rv, =UART_VADDR @ virtual .endm .macro senduart,rd,rx diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h new file mode 100644 index 00000000000..8c6896fd1e5 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/init.h> + +struct platform_device *imx_add_platform_device(const char *name, int id, + const struct resource *res, unsigned int num_resources, + const void *data, size_t size_data); + +#include <linux/fec.h> +struct imx_fec_data { + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_fec( + const struct imx_fec_data *data, + const struct fec_platform_data *pdata); + +#include <linux/can/platform/flexcan.h> +struct platform_device *__init imx_add_flexcan(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct flexcan_platform_data *pdata); + +#include <linux/gpio_keys.h> +struct platform_device *__init imx_add_gpio_keys( + const struct gpio_keys_platform_data *pdata); + +#include <mach/i2c.h> +struct imx_imx_i2c_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, + const struct imxi2c_platform_data *pdata); + +#include <mach/ssi.h> +struct imx_imx_ssi_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; + resource_size_t dmatx0; + resource_size_t dmarx0; + resource_size_t dmatx1; + resource_size_t dmarx1; +}; +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata); + +#include <mach/imx-uart.h> +struct imx_imx_uart_3irq_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irqrx; + resource_size_t irqtx; + resource_size_t irqrts; +}; +struct platform_device *__init imx_add_imx_uart_3irq( + const struct imx_imx_uart_3irq_data *data, + const struct imxuart_platform_data *pdata); + +struct imx_imx_uart_1irq_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, + const struct imxuart_platform_data *pdata); + +#include <mach/mxc_nand.h> +struct imx_mxc_nand_data { + /* + * id is traditionally 0, but -1 is more appropriate. We use -1 for new + * machines but don't change existing devices as the nand device usually + * appears in the kernel command line to pass its partitioning. + */ + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t axibase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata); + +#include <mach/spi.h> +struct imx_spi_imx_data { + const char *devid; + int id; + resource_size_t iobase; + resource_size_t iosize; + int irq; +}; +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, + const struct spi_imx_master *pdata); + +#include <mach/esdhc.h> +struct imx_esdhc_imx_data { + int id; + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_esdhc( + const struct imx_esdhc_imx_data *data, + const struct esdhc_platform_data *pdata); diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h deleted file mode 100644 index 7c4870bd5a2..00000000000 --- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h - * - * i.MX DMA registration and IRQ dispatching - * - * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de> - * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_DMA_H -#define __ASM_ARCH_MXC_DMA_H - -#define IMX_DMA_CHANNELS 16 - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 -#define DMA_MODE_MASK 1 - -#define MX1_DMA_REG(offset) MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset)) - -/* DMA Interrupt Mask Register */ -#define MX1_DMA_DIMR MX1_DMA_REG(0x08) - -/* Channel Control Register */ -#define MX1_DMA_CCR(x) MX1_DMA_REG(0x8c + ((x) << 6)) - -#define IMX_DMA_MEMSIZE_32 (0 << 4) -#define IMX_DMA_MEMSIZE_8 (1 << 4) -#define IMX_DMA_MEMSIZE_16 (2 << 4) -#define IMX_DMA_TYPE_LINEAR (0 << 10) -#define IMX_DMA_TYPE_2D (1 << 10) -#define IMX_DMA_TYPE_FIFO (2 << 10) - -#define IMX_DMA_ERR_BURST (1 << 0) -#define IMX_DMA_ERR_REQUEST (1 << 1) -#define IMX_DMA_ERR_TRANSFER (1 << 2) -#define IMX_DMA_ERR_BUFFER (1 << 3) -#define IMX_DMA_ERR_TIMEOUT (1 << 4) - -int -imx_dma_config_channel(int channel, unsigned int config_port, - unsigned int config_mem, unsigned int dmareq, int hw_chaining); - -void -imx_dma_config_burstlen(int channel, unsigned int burstlen); - -int -imx_dma_setup_single(int channel, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, - unsigned int dmamode); - - -/* - * Use this flag as the dma_length argument to imx_dma_setup_sg() - * to create an endless running dma loop. The end of the scatterlist - * must be linked to the beginning for this to work. - */ -#define IMX_DMA_LENGTH_LOOP ((unsigned int)-1) - -int -imx_dma_setup_sg(int channel, struct scatterlist *sg, - unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, unsigned int dmamode); - -int -imx_dma_setup_handlers(int channel, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -int -imx_dma_setup_progression_handler(int channel, - void (*prog_handler) (int, void*, struct scatterlist*)); - -void imx_dma_enable(int channel); - -void imx_dma_disable(int channel); - -int imx_dma_request(int channel, const char *name); - -void imx_dma_free(int channel); - -enum imx_dma_prio { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -}; - -int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio); - -#endif /* _ASM_ARCH_MXC_DMA_H */ diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h new file mode 100644 index 00000000000..ef7751546f5 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/dma.h @@ -0,0 +1,67 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_DMA_H__ +#define __ASM_ARCH_MXC_DMA_H__ + +#include <linux/scatterlist.h> +#include <linux/device.h> +#include <linux/dmaengine.h> + +/* + * This enumerates peripheral types. Used for SDMA. + */ +enum sdma_peripheral_type { + IMX_DMATYPE_SSI, /* MCU domain SSI */ + IMX_DMATYPE_SSI_SP, /* Shared SSI */ + IMX_DMATYPE_MMC, /* MMC */ + IMX_DMATYPE_SDHC, /* SDHC */ + IMX_DMATYPE_UART, /* MCU domain UART */ + IMX_DMATYPE_UART_SP, /* Shared UART */ + IMX_DMATYPE_FIRI, /* FIRI */ + IMX_DMATYPE_CSPI, /* MCU domain CSPI */ + IMX_DMATYPE_CSPI_SP, /* Shared CSPI */ + IMX_DMATYPE_SIM, /* SIM */ + IMX_DMATYPE_ATA, /* ATA */ + IMX_DMATYPE_CCM, /* CCM */ + IMX_DMATYPE_EXT, /* External peripheral */ + IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */ + IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */ + IMX_DMATYPE_DSP, /* DSP */ + IMX_DMATYPE_MEMORY, /* Memory */ + IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */ + IMX_DMATYPE_SPDIF, /* SPDIF */ + IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */ + IMX_DMATYPE_ASRC, /* ASRC */ + IMX_DMATYPE_ESAI, /* ESAI */ +}; + +enum imx_dma_prio { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +}; + +struct imx_dma_data { + int dma_request; /* DMA request line */ + enum sdma_peripheral_type peripheral_type; + int priority; +}; + +static inline int imx_dma_is_ipu(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ipu-core"); +} + +static inline int imx_dma_is_general_purpose(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "imx-sdma") || + !strcmp(dev_name(chan->device->dev), "imx-dma"); +} + +#endif diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h new file mode 100644 index 00000000000..a48a9aaa56b --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/esdhc.h @@ -0,0 +1,16 @@ +/* + * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#ifndef __ASM_ARCH_IMX_ESDHC_H +#define __ASM_ARCH_IMX_ESDHC_H + +struct esdhc_platform_data { + unsigned int wp_gpio; /* write protect pin */ +}; +#endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h index a1fd5830af4..a21d3313f99 100644 --- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h +++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * Copyright (C) 2010 Eric Benard - eric@eukrea.com * * Based on board-pcm038.h which is : * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) @@ -19,22 +19,32 @@ * MA 02110-1301, USA. */ -#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ -#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ +#ifndef __MACH_EUKREA_BASEBOARDS_H__ +#define __MACH_EUKREA_BASEBOARDS_H__ #ifndef __ASSEMBLY__ /* * This CPU module needs a baseboard to work. After basic initializing * its own devices, it calls baseboard's init function. * TODO: Add your own baseboard init function and call it from - * inside eukrea_cpuimx27_init(). + * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init() + * eukrea_cpuimx35_init() eukrea_cpuimx51_init() + * or eukrea_cpuimx51sd_init(). * * This example here is for the development board. Refer - * eukrea_mbimx27-baseboard.c + * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25 + * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27 + * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35 + * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51 + * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd */ +extern void eukrea_mbimxsd25_baseboard_init(void); extern void eukrea_mbimx27_baseboard_init(void); +extern void eukrea_mbimxsd35_baseboard_init(void); +extern void eukrea_mbimx51_baseboard_init(void); +extern void eukrea_mbimxsd51_baseboard_init(void); #endif -#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */ +#endif /* __MACH_EUKREA_BASEBOARDS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index 894d2f87c85..af33b74f569 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -19,6 +19,7 @@ #ifndef __ASM_ARCH_MXC_GPIO_H__ #define __ASM_ARCH_MXC_GPIO_H__ +#include <linux/spinlock.h> #include <mach/hardware.h> #include <asm-generic/gpio.h> @@ -33,9 +34,11 @@ struct mxc_gpio_port { void __iomem *base; int irq; + int irq_high; int virtual_irq_start; struct gpio_chip chip; u32 both_edges; + spinlock_t lock; }; int mxc_gpio_init(struct mxc_gpio_port*, int); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index f39220d1b67..d7f52c91f82 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -252,6 +252,7 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CONTRAST__PWM4_PWMO IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL) #define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL) @@ -371,30 +372,41 @@ #define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE) +#define KPP_CTL_ROW (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) +#define KPP_CTL_COL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + +#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW) #define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW) #define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW) #define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL) #define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE) +#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW) #define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL) #define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL) +#define MX25_PAD_KPP_COL0__AUD5_TXD IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_KPP_COL1__AUD5_RXD IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL2__UART4_RTS IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_KPP_COL2__AUD5_TXC IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE) +#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL3__UART4_CTS IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_KPP_COL3__AUD5_TXFS IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index ab0f95d953d..d7a41e9a260 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -27,8 +27,8 @@ typedef enum iomux_config { IOMUX_CONFIG_ALT5, IOMUX_CONFIG_ALT6, IOMUX_CONFIG_ALT7, - IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ - IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ + IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ } iomux_pin_cfg_t; /* Pad control groupings */ @@ -38,297 +38,350 @@ typedef enum iomux_config { PAD_CTL_SRE_FAST) #define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ PAD_CTL_SRE_FAST) +#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS) #define MX51_USBH1_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ PAD_CTL_PKE | PAD_CTL_HYS) #define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \ PAD_CTL_SRE_FAST) +#define MX51_GPIO_PAD_CTRL_2 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP) +#define MX51_ECSPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) +#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_SRE_FAST | \ + PAD_CTL_DVS) -/* - * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> - * If <padname> or <padmode> refers to a GPIO, it is named - * GPIO_<unit>_<num> see also iomux-v3.h - */ +#define MX51_PAD_CTRL_1 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS) +#define MX51_PAD_CTRL_2 (PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) +#define MX51_PAD_CTRL_4 (PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH) /* - * FIXME: This was converted using scripts from existing Freescale code to - * this form used upstream. Need to verify the name format. + * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> + * See also iomux-v3.h */ -/* PAD MUX ALT INPSE PATH PADCTRL */ - -#define MX51_PAD_GPIO_2_0__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_1__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_2__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_3__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_4__EIM_D20 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_5__EIM_D21 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D21__GPIO_2_5 IOMUX_PAD(0x404, 0x070, IOMUX_CONFIG_ALT1, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_2_6__EIM_D22 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_7__EIM_D23 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL) - -/* Babbage UART3 */ -#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) -#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL) - -#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_GPIO_2_10__EIM_A16 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_11__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_12__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_13__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_14__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_15__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_16__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_17__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_GPIO_2_18__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_19__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_20__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_21__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_22__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_23__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_GPIO_2_24__EIM_OE IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_25__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_26__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_27__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_28__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_29__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_30__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_2_31__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_GPIO_3_1__EIM_LBA IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_2__EIM_CRE IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_3__NANDF_WE_B IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_4__NANDF_RE_B IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_5__NANDF_ALE IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_6__NANDF_CLE IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_7__NANDF_WP_B IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_8__NANDF_RB0 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_9__NANDF_RB1 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_10__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_11__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_12__GPIO_NAND IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) -/* REVISIT: Not sure of these values - - #define MX51_PAD_GPIO_1___NANDF_RB4 IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL) - #define MX51_PAD_GPIO_3_13__NANDF_RB5 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL) - #define MX51_PAD_GPIO_3_15__NANDF_RB7 IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL) -*/ -#define MX51_PAD_GPIO_3_14__NANDF_RB6 IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_16__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_17__NANDF_CS1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_18__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_19__NANDF_CS3 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_20__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_21__NANDF_CS5 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_22__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_23__NANDF_CS7 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_25__NANDF_D15 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_26__NANDF_D14 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_27__NANDF_D13 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_28__NANDF_D12 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_29__NANDF_D11 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_30__NANDF_D10 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_31__NANDF_D9 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_0__NANDF_D8 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_1__NANDF_D7 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_2__NANDF_D6 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_3__NANDF_D5 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_5__NANDF_D3 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_6__NANDF_D2 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_7__NANDF_D1 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_8__NANDF_D0 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_12__CSI1_D8 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_13__CSI1_D9 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_9__CSI2_D12 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_10__CSI2_D13 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_11__CSI2_D14 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_12__CSI2_D15 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_11__CSI2_D16 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_12__CSI2_D17 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_11__CSI2_D18 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_12__CSI2_D19 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_13__CSI2_VSYNC IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_14__CSI2_HSYNC IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_CSI2_PKE0__CSI2_PKE0 IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_16__I2C1_CLK IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_17__I2C1_DAT IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_20__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_21__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_22__CSPI1_MOSI IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_23__CSPI1_MISO IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_24__CSPI1_SS0 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_25__CSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_26__CSPI1_RDY IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_4_27__CSPI1_SCLK IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) - -/* Babbage UART1 */ -#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) -#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) -#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL) -#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL) - -/* Babbage UART2 */ -#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL) -#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL) - -#define MX51_PAD_GPIO_1_22__UART3_RXD IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_23__UART3_TXD IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_24__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_STP__GPIO_1_27 IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_GPIO, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) -#define MX51_PAD_GPIO_3_0__DI1_PIN11 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_1__DI1_PIN12 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_2__DI1_PIN13 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_3__DI1_D0_CS IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_4__DI1_D1_CS IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_19__DISP2_DAT6 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_29__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_30__DISP2_DAT8 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_31__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_0__GPIO1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_1__GPIO1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_2__GPIO1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_3__GPIO1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_6__GPIO1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) -#define MX51_PAD_GPIO_1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \ - (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)) -#define MX51_PAD_GPIO_1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) - -/* EIM */ -#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL) +/* PAD MUX ALT INPSE PATH PADCTRL */ +#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D16__GPIO_2_0 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, (4 | IOMUX_CONFIG_SION), \ + 0x09b4, 0, MX51_I2C_PAD_CTRL) +#define MX51_PAD_EIM_D17__GPIO_2_1 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D18__GPIO_2_2 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D19__GPIO_2_3 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, (4 | IOMUX_CONFIG_SION), \ + 0x09b0, 0, MX51_I2C_PAD_CTRL) +#define MX51_PAD_EIM_D20__GPIO_2_4 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D21__GPIO_2_5 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_EIM_D22__GPIO_2_6 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D23__GPIO_2_7 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, 3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, 0x0, 0, MX51_UART2_PAD_CTRL) +#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART2_PAD_CTRL) +#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A16__GPIO_2_10 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A17__GPIO_2_11 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A18__GPIO_2_12 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A19__GPIO_2_13 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A20__GPIO_2_14 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A21__GPIO_2_15 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A23__GPIO_2_17 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A24__GPIO_2_18 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A25__GPIO_2_19 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A26__GPIO_2_20 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A27__GPIO_2_21 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0x0d4, 3, 0x0, 0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) +#define MX51_PAD_EIM_EB3__GPIO_2_23 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB3__FEC_RDAT1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_EIM_OE__GPIO_2_24 IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS0__GPIO_2_25 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS1__GPIO_2_26 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS2__GPIO_2_27 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS2__FEC_RDAT2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_EIM_CS3__GPIO_2_28 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS3__FEC_RDAT3 IOMUX_PAD(0x480, 0x0ec, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_EIM_CS4__GPIO_2_29 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_EIM_CS5__GPIO_2_30 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_EIM_DTACK__GPIO_2_31 IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_LBA__GPIO_3_1 IOMUX_PAD(0x494, 0x0FC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CRE__GPIO_3_2 IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_WE_B__GPIO_3_3 IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RE_B__GPIO_3_4 IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_ALE__GPIO_3_5 IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CLE__GPIO_3_6 IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_WP_B__GPIO_3_7 IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB0__GPIO_3_8 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB1__GPIO_3_9 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__GPIO_3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_NANDF_RB3__GPIO_3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__FEC_RXCLK IOMUX_PAD(0x504, 0x128, 1, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_NANDF_RB6__FEC_RDAT0 IOMUX_PAD(0x5DC, 0x134, 1, 0x0, 0, MX51_PAD_CTRL_4) +#define MX51_PAD_NANDF_RB7__FEC_TDAT0 IOMUX_PAD(0x5E0, 0x138, 1, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_GPIO_NAND__GPIO_3_12 IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS0__GPIO_3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS1__GPIO_3_17 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS2__GPIO_3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS3__GPIO_3_19 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13C, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS4__GPIO_3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS4__FEC_TDAT1 IOMUX_PAD(0x528, 0x140, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS5__GPIO_3_21 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS5__FEC_TDAT2 IOMUX_PAD(0x52C, 0x144, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS6__GPIO_3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS6__FEC_TDAT3 IOMUX_PAD(0x530, 0x148, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS7__GPIO_3_23 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0, 0, MX51_PAD_CTRL_4) +#define MX51_PAD_NANDF_D15__GPIO_3_25 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53C, 0x154, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_NANDF_D14__GPIO_3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D13__GPIO_3_27 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D12__GPIO_3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D11__GPIO_3_29 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D10__GPIO_3_30 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D9__GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D8__GPIO_4_0 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D7__GPIO_4_1 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D6__GPIO_4_2 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D5__GPIO_4_3 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D4__GPIO_4_4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D3__GPIO_4_5 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D2__GPIO_4_6 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D1__GPIO_4_7 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D0__GPIO_4_8 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D8__GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D9__GPIO_3_13 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x000, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x000, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x000, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D12__GPIO_4_9 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D13__GPIO_4_10 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D14__GPIO_4_11 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D15__GPIO_4_12 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D16__GPIO_4_11 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D17__GPIO_4_12 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D18__GPIO_4_11 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D19__GPIO_4_12 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_VSYNC__GPIO_4_13 IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_HSYNC__GPIO_4_14 IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_PIXCLK__GPIO_4_15 IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_CLK__GPIO_4_16 IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_CLK__HSI2C_CLK IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_DAT__GPIO_4_17 IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_DAT__HSI2C_DAT IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18 IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19 IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_CK__GPIO_4_20 IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_FS__GPIO_4_21 IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_CSPI1_MOSI__GPIO_4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_CSPI1_MISO__GPIO_4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_CSPI1_SS0__GPIO_4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_CSPI1_SS1__GPIO_4_25 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_CSPI1_RDY__GPIO_4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, 0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART1_PAD_CTRL) +#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, 0x0, 0, MX51_UART1_PAD_CTRL) +#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART2_PAD_CTRL) +#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, 0, 0x0, 0, MX51_UART2_PAD_CTRL) +#define MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART3_PAD_CTRL) +#define MX51_PAD_UART3_RXD__GPIO_1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_UART3_TXD__GPIO_1_23 IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_OWIRE_LINE__GPIO_1_24 IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65C, 0x26C, 2, 0x9f0, 4, MX51_UART3_PAD_CTRL) +#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65C, 0x26C, (3 | IOMUX_CONFIG_SION), \ + 0x09b8, 1, MX51_I2C_PAD_CTRL) +#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, 0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, (3 | IOMUX_CONFIG_SION), \ + 0x09bc, 1, MX51_I2C_PAD_CTRL) +#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_STP__GPIO_1_27 IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_DI1_PIN11__GPIO_3_0 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT6__GPIO_1_19 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT7__GPIO_1_29 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT8__GPIO_1_30 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT9__GPIO_1_31 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79C, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL) +#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) +#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7A0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7A4, 0x39C, 1, 0x8d8, 2, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7A8, 0x3A0, 1, 0x8d4, 2, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7AC, 0x3A4, 1, 0x8e4, 2, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7B0, 0x3A8, 1, 0x8e8, 2, NO_PAD_CTRL) +#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, IOMUX_CONFIG_SION, 0x0, 1, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__I2C2_SCL IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \ + 0x9b8, 3, MX51_I2C_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__I2C2_SDA IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \ + 0x9bc, 3, MX51_I2C_PAD_CTRL) +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) #endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h index 3887f3fe29d..15d59510f59 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __MACH_IOMUX_MXC91231_H__ diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index f2f73d31d5b..0880a4a1aed 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -89,6 +89,21 @@ struct pad_desc { #define PAD_CTL_SRE_FAST (1 << 0) #define PAD_CTL_SRE_SLOW (0 << 0) + +#define MX51_NUM_GPIO_PORT 4 + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + /* * setups a single pad in the iomuxer */ diff --git a/arch/arm/plat-mxc/include/mach/iram.h b/arch/arm/plat-mxc/include/mach/iram.h new file mode 100644 index 00000000000..022690c3370 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iram.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include <linux/errno.h> + +#ifdef CONFIG_IRAM_ALLOC + +int __init iram_init(unsigned long base, unsigned long size); +void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr); +void iram_free(unsigned long dma_addr, unsigned int size); + +#else + +static inline int __init iram_init(unsigned long base, unsigned long size) +{ + return -ENOMEM; +} + +static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) +{ + return NULL; +} + +static inline void iram_free(unsigned long base, unsigned long size) {} + +#endif diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index c4b40c35a6a..564ec9dbc93 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -44,12 +44,12 @@ */ #define CONSISTENT_DMA_SIZE SZ_8M -#elif defined(CONFIG_MX1_VIDEO) +#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT) /* * Increase size of DMA-consistent memory region. * This is required for i.MX camera driver to capture at least four VGA frames. */ #define CONSISTENT_DMA_SIZE SZ_4M -#endif /* CONFIG_MX1_VIDEO */ +#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */ #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h index de2128dada5..29115f405af 100644 --- a/arch/arm/plat-mxc/include/mach/mmc.h +++ b/arch/arm/plat-mxc/include/mach/mmc.h @@ -31,6 +31,9 @@ struct imxmmc_platform_data { /* adjust slot voltage */ void (*setpower)(struct device *, unsigned int vdd); + + /* enable card detect using DAT3 */ + int dat3_card_detect; }; #endif diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 5eba7e6785d..641b2461823 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -91,24 +91,24 @@ #define MX1_SIM_DATA_INT 16 #define MX1_RTC_INT 17 #define MX1_RTC_SAMINT 18 -#define MX1_UART2_MINT_PFERR 19 -#define MX1_UART2_MINT_RTS 20 -#define MX1_UART2_MINT_DTR 21 -#define MX1_UART2_MINT_UARTC 22 -#define MX1_UART2_MINT_TX 23 -#define MX1_UART2_MINT_RX 24 -#define MX1_UART1_MINT_PFERR 25 -#define MX1_UART1_MINT_RTS 26 -#define MX1_UART1_MINT_DTR 27 -#define MX1_UART1_MINT_UARTC 28 -#define MX1_UART1_MINT_TX 29 -#define MX1_UART1_MINT_RX 30 +#define MX1_INT_UART2PFERR 19 +#define MX1_INT_UART2RTS 20 +#define MX1_INT_UART2DTR 21 +#define MX1_INT_UART2UARTC 22 +#define MX1_INT_UART2TX 23 +#define MX1_INT_UART2RX 24 +#define MX1_INT_UART1PFERR 25 +#define MX1_INT_UART1RTS 26 +#define MX1_INT_UART1DTR 27 +#define MX1_INT_UART1UARTC 28 +#define MX1_INT_UART1TX 29 +#define MX1_INT_UART1RX 30 #define MX1_VOICE_DAC_INT 31 #define MX1_VOICE_ADC_INT 32 #define MX1_PEN_DATA_INT 33 #define MX1_PWM_INT 34 #define MX1_SDHC_INT 35 -#define MX1_I2C_INT 39 +#define MX1_INT_I2C 39 #define MX1_CSPI_INT 41 #define MX1_SSI_TX_INT 42 #define MX1_SSI_TX_ERR_INT 43 @@ -245,7 +245,7 @@ #define PEN_DATA_INT MX1_PEN_DATA_INT #define PWM_INT MX1_PWM_INT #define SDHC_INT MX1_SDHC_INT -#define I2C_INT MX1_I2C_INT +#define I2C_INT MX1_INT_I2C #define CSPI_INT MX1_CSPI_INT #define SSI_TX_INT MX1_SSI_TX_INT #define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index ed98b9c9f38..8bc59720b6e 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -120,7 +120,7 @@ #define MX21_INT_GPT1 26 #define MX21_INT_WDOG 27 #define MX21_INT_PCMCIA 28 -#define MX21_INT_NANDFC 29 +#define MX21_INT_NFC 29 #define MX21_INT_BMI 30 #define MX21_INT_CSI 31 #define MX21_INT_DMACH0 32 diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 4eb6e334bda..cf46a45b0d4 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -11,6 +11,12 @@ #define MX25_AVIC_BASE_ADDR_VIRT 0xfc400000 #define MX25_AVIC_SIZE SZ_1M +#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000) +#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000) +#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000) +#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000) +#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000) +#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000) #define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000) #define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000) @@ -27,22 +33,63 @@ IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \ IMX_IO_ADDRESS(x, MX25_AVIC)) +#define MX25_AIPS1_IO_ADDRESS(x) \ + (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT) + #define MX25_UART1_BASE_ADDR 0x43f90000 #define MX25_UART2_BASE_ADDR 0x43f94000 +#define MX25_AUDMUX_BASE_ADDR 0x43fb0000 +#define MX25_UART3_BASE_ADDR 0x5000c000 +#define MX25_UART4_BASE_ADDR 0x50008000 +#define MX25_UART5_BASE_ADDR 0x5002c000 +#define MX25_CSPI3_BASE_ADDR 0x50004000 +#define MX25_CSPI2_BASE_ADDR 0x50010000 #define MX25_FEC_BASE_ADDR 0x50038000 +#define MX25_SSI2_BASE_ADDR 0x50014000 +#define MX25_SSI1_BASE_ADDR 0x50034000 #define MX25_NFC_BASE_ADDR 0xbb000000 #define MX25_DRYICE_BASE_ADDR 0x53ffc000 +#define MX25_ESDHC1_BASE_ADDR 0x53fb4000 +#define MX25_ESDHC2_BASE_ADDR 0x53fb8000 #define MX25_LCDC_BASE_ADDR 0x53fbc000 +#define MX25_KPP_BASE_ADDR 0x43fa8000 +#define MX25_SDMA_BASE_ADDR 0x53fd4000 +#define MX25_OTG_BASE_ADDR 0x53ff4000 +#define MX25_CSI_BASE_ADDR 0x53ff8000 -#define MX25_INT_DRYICE 25 -#define MX25_INT_FEC 57 -#define MX25_INT_NANDFC 33 -#define MX25_INT_LCDC 39 +#define MX25_INT_CSPI3 0 +#define MX25_INT_I2C1 3 +#define MX25_INT_I2C2 4 +#define MX25_INT_UART4 5 +#define MX25_INT_ESDHC2 8 +#define MX25_INT_ESDHC1 9 +#define MX25_INT_I2C3 10 +#define MX25_INT_SSI2 11 +#define MX25_INT_SSI1 12 +#define MX25_INT_CSPI2 13 +#define MX25_INT_CSPI1 14 +#define MX25_INT_CSI 17 +#define MX25_INT_UART3 18 +#define MX25_INT_KPP 24 +#define MX25_INT_DRYICE 25 +#define MX25_INT_UART2 32 +#define MX25_INT_NFC 33 +#define MX25_INT_SDMA 34 +#define MX25_INT_LCDC 39 +#define MX25_INT_UART5 40 +#define MX25_INT_CAN1 43 +#define MX25_INT_CAN2 44 +#define MX25_INT_UART1 45 +#define MX25_INT_FEC 57 -#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS) -#define UART1_BASE_ADDR MX25_UART1_BASE_ADDR -#define UART2_BASE_ADDR MX25_UART2_BASE_ADDR -#endif +#define MX25_DMA_REQ_SSI2_RX1 22 +#define MX25_DMA_REQ_SSI2_TX1 23 +#define MX25_DMA_REQ_SSI2_RX0 24 +#define MX25_DMA_REQ_SSI2_TX0 25 +#define MX25_DMA_REQ_SSI1_RX1 26 +#define MX25_DMA_REQ_SSI1_TX1 27 +#define MX25_DMA_REQ_SSI1_RX0 28 +#define MX25_DMA_REQ_SSI1_TX0 29 #endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index bae9cd75bee..2237ba2e535 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -48,7 +48,7 @@ #define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000) #define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000) #define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000) -#define MX27_I2C_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) +#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000) #define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000) #define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000) #define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000) @@ -150,7 +150,7 @@ static inline void mx27_setup_weimcs(size_t cs, #define MX27_INT_SDHC3 9 #define MX27_INT_SDHC2 10 #define MX27_INT_SDHC1 11 -#define MX27_INT_I2C 12 +#define MX27_INT_I2C1 12 #define MX27_INT_SSI2 13 #define MX27_INT_SSI1 14 #define MX27_INT_CSPI2 15 @@ -167,7 +167,7 @@ static inline void mx27_setup_weimcs(size_t cs, #define MX27_INT_GPT1 26 #define MX27_INT_WDOG 27 #define MX27_INT_PCMCIA 28 -#define MX27_INT_NANDFC 29 +#define MX27_INT_NFC 29 #define MX27_INT_ATA 30 #define MX27_INT_CSI 31 #define MX27_INT_DMACH0 32 diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h new file mode 100644 index 00000000000..3c080a32dbf --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h @@ -0,0 +1,46 @@ +/* + * mx2-cam.h - i.MX27/i.MX25 camera driver header file + * + * Copyright (C) 2003, Intel Corporation + * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de> + * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MX2_CAM_H_ +#define __MACH_MX2_CAM_H_ + +#define MX2_CAMERA_SWAP16 (1 << 0) +#define MX2_CAMERA_EXT_VSYNC (1 << 1) +#define MX2_CAMERA_CCIR (1 << 2) +#define MX2_CAMERA_CCIR_INTERLACE (1 << 3) +#define MX2_CAMERA_HSYNC_HIGH (1 << 4) +#define MX2_CAMERA_GATED_CLOCK (1 << 5) +#define MX2_CAMERA_INV_DATA (1 << 6) +#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) +#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) + +/** + * struct mx2_camera_platform_data - optional platform data for mx2_camera + * @flags: any combination of MX2_CAMERA_* + * @clk: clock rate of the csi block / 2 + */ +struct mx2_camera_platform_data { + unsigned long flags; + unsigned long clk; +}; + +#endif /* __MACH_MX2_CAM_H_ */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index fb90e119c2b..61cfe827498 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -23,7 +23,7 @@ #define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000) #define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000) #define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000) -#define MX31_I2C_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) +#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000) #define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000) #define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) #define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000) @@ -145,7 +145,7 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_FIRI 7 #define MX31_INT_MMC_SDHC2 8 #define MX31_INT_MMC_SDHC1 9 -#define MX31_INT_I2C 10 +#define MX31_INT_I2C1 10 #define MX31_INT_SSI2 11 #define MX31_INT_SSI1 12 #define MX31_INT_CSPI2 13 @@ -168,7 +168,7 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_POWER_FAIL 30 #define MX31_INT_CCM_DVFS 31 #define MX31_INT_UART2 32 -#define MX31_INT_NANDFC 33 +#define MX31_INT_NFC 33 #define MX31_INT_SDMA 34 #define MX31_INT_USB1 35 #define MX31_INT_USB2 36 @@ -197,6 +197,15 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_EXT_WDOG 62 #define MX31_INT_EXT_TV 63 +#define MX31_DMA_REQ_SSI2_RX1 22 +#define MX31_DMA_REQ_SSI2_TX1 23 +#define MX31_DMA_REQ_SSI2_RX0 24 +#define MX31_DMA_REQ_SSI2_TX0 25 +#define MX31_DMA_REQ_SSI1_RX1 26 +#define MX31_DMA_REQ_SSI1_TX1 27 +#define MX31_DMA_REQ_SSI1_RX0 28 +#define MX31_DMA_REQ_SSI1_TX0 29 + #define MX31_PROD_SIGNATURE 0x1 /* For MX31 */ /* silicon revisions specific to i.MX31 */ @@ -231,7 +240,6 @@ static inline void mx31_setup_weimcs(size_t cs, #define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR #define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER #define MXC_INT_FIRI MX31_INT_FIRI -#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1 #define MXC_INT_MBX MX31_INT_MBX #define MXC_INT_CSPI3 MX31_INT_CSPI3 #define MXC_INT_SIM2 MX31_INT_SIM2 diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index 526a55842ae..6267cff6035 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -1,5 +1,6 @@ #ifndef __MACH_MX35_H__ #define __MACH_MX35_H__ + /* * IRAM */ @@ -18,7 +19,7 @@ #define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000) #define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000) #define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000) -#define MX35_I2C_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) +#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000) #define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000) #define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000) #define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000) @@ -52,6 +53,9 @@ #define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000) #define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000) #define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000) +#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000) +#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000) +#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000) #define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000) #define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000) #define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000) @@ -60,7 +64,11 @@ #define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000) #define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000) #define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000) +#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000) +#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000) #define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) +#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000) + #define MX35_OTG_BASE_ADDR 0x53ff4000 #define MX35_ROMP_BASE_ADDR 0x60000000 @@ -120,10 +128,10 @@ #define MX35_INT_I2C3 3 #define MX35_INT_I2C2 4 #define MX35_INT_RTIC 6 -#define MX35_INT_MMC_SDHC1 7 -#define MX35_INT_MMC_SDHC2 8 -#define MX35_INT_MMC_SDHC3 9 -#define MX35_INT_I2C 10 +#define MX35_INT_ESDHC1 7 +#define MX35_INT_ESDHC2 8 +#define MX35_INT_ESDHC3 9 +#define MX35_INT_I2C1 10 #define MX35_INT_SSI1 11 #define MX35_INT_SSI2 12 #define MX35_INT_CSPI2 13 @@ -143,7 +151,7 @@ #define MX35_INT_GPT 29 #define MX35_INT_POWER_FAIL 30 #define MX35_INT_UART2 32 -#define MX35_INT_NANDFC 33 +#define MX35_INT_NFC 33 #define MX35_INT_SDMA 34 #define MX35_INT_USBHS 35 #define MX35_INT_USBOTG 37 @@ -171,30 +179,24 @@ #define MX35_INT_EXT_WDOG 62 #define MX35_INT_EXT_TV 63 +#define MX35_DMA_REQ_SSI2_RX1 22 +#define MX35_DMA_REQ_SSI2_TX1 23 +#define MX35_DMA_REQ_SSI2_RX0 24 +#define MX35_DMA_REQ_SSI2_TX0 25 +#define MX35_DMA_REQ_SSI1_RX1 26 +#define MX35_DMA_REQ_SSI1_TX1 27 +#define MX35_DMA_REQ_SSI1_RX0 28 +#define MX35_DMA_REQ_SSI1_TX0 29 + #define MX35_PROD_SIGNATURE 0x1 /* For MX31 */ -/* silicon revisions specific to i.MX31 */ -#define MX35_CHIP_REV_1_0 0x10 -#define MX35_CHIP_REV_1_1 0x11 -#define MX35_CHIP_REV_1_2 0x12 -#define MX35_CHIP_REV_1_3 0x13 -#define MX35_CHIP_REV_2_0 0x20 -#define MX35_CHIP_REV_2_1 0x21 -#define MX35_CHIP_REV_2_2 0x22 -#define MX35_CHIP_REV_2_3 0x23 -#define MX35_CHIP_REV_3_0 0x30 -#define MX35_CHIP_REV_3_1 0x31 -#define MX35_CHIP_REV_3_2 0x32 - -#define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0 +#define MX35_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0 #define MX35_SYSTEM_REV_NUM 3 #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS /* these should go away */ #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR #define MXC_INT_OWIRE MX35_INT_OWIRE -#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2 -#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3 #define MXC_INT_GPU2D MX35_INT_GPU2D #define MXC_INT_ASRC MX35_INT_ASRC #define MXC_INT_USBHS MX35_INT_USBHS diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h index 36d7ff27b5e..f226ee3777e 100644 --- a/arch/arm/plat-mxc/include/mach/mx3_camera.h +++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _MX3_CAMERA_H_ diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 7a356de385f..d1bd26d7b8a 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -240,7 +240,7 @@ #define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ -/* silicon revisions specific to i.MX31 */ +/* silicon revisions specific to i.MX31 and i.MX35 */ #define MX3x_CHIP_REV_1_0 0x10 #define MX3x_CHIP_REV_1_1 0x11 #define MX3x_CHIP_REV_1_2 0x12 @@ -267,6 +267,14 @@ static inline int mx31_revision(void) { return mx31_cpu_rev; } + +extern unsigned int mx35_cpu_rev; +extern void mx35_read_cpu_rev(void); + +static inline int mx35_revision(void) +{ + return mx35_cpu_rev; +} #endif #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS @@ -389,19 +397,6 @@ static inline int mx31_revision(void) #define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG #define MXC_INT_EXT_TV MX3x_INT_EXT_TV #define PROD_SIGNATURE MX3x_PROD_SIGNATURE -#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0 -#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1 -#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2 -#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3 -#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0 -#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1 -#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2 -#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3 -#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0 -#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1 -#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2 -#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN -#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM #endif #endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 5aad344d565..2af7a1056fc 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -1,5 +1,5 @@ -#ifndef __ASM_ARCH_MXC_MX51_H__ -#define __ASM_ARCH_MXC_MX51_H__ +#ifndef __MACH_MX51_H__ +#define __MACH_MX51_H__ /* * MX51 memory map: @@ -7,24 +7,23 @@ * * Virt Phys Size What * --------------------------------------------------------------------------- - * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM) + * fa3e0000 1ffe0000 128K IRAM (SCCv2 RAM) * 30000000 256M GPU * 40000000 512M IPU - * FA200000 60000000 1M DEBUG - * FB100000 70000000 1M SPBA 0 - * FB000000 73F00000 1M AIPS 1 - * FB200000 83F00000 1M AIPS 2 - * 8FFFC000 16K TZIC (interrupt controller) + * fa200000 60000000 1M DEBUG + * fb100000 70000000 1M SPBA 0 + * fb000000 73f00000 1M AIPS 1 + * fb200000 83f00000 1M AIPS 2 + * 8fffc000 16K TZIC (interrupt controller) * 90000000 256M CSD0 SDRAM/DDR - * A0000000 256M CSD1 SDRAM/DDR - * B0000000 128M CS0 Flash - * B8000000 128M CS1 Flash - * C0000000 128M CS2 Flash - * C8000000 64M CS3 Flash - * CC000000 32M CS4 SRAM - * CE000000 32M CS5 SRAM - * CFFF0000 64K NFC (NAND Flash AXI) - * + * a0000000 256M CSD1 SDRAM/DDR + * b0000000 128M CS0 Flash + * b8000000 128M CS1 Flash + * c0000000 128M CS2 Flash + * c8000000 64M CS3 Flash + * cc000000 32M CS4 SRAM + * ce000000 32M CS5 SRAM + * cfff0000 64K NFC (NAND Flash AXI) */ /* @@ -36,65 +35,151 @@ /* * IRAM */ -#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ -#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000 +#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */ +#define MX51_IRAM_BASE_ADDR_VIRT 0xfa3e0000 #define MX51_IRAM_PARTITIONS 16 -#define MX51_IRAM_PARTITIONS_TO1 12 #define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */ +#define MX51_GPU_BASE_ADDR 0x20000000 +#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 +#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 + +#define MX51_DEBUG_BASE_ADDR 0x60000000 +#define MX51_DEBUG_BASE_ADDR_VIRT 0xfa200000 +#define MX51_DEBUG_SIZE SZ_1M + +#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000) +#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x02000) +#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x03000) +#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x04000) +#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x05000) +#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x06000) +#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x07000) +#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x08000) + /* - * NFC + * SPBA global module enabled #0 */ -#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ -#define MX51_NFC_AXI_SIZE SZ_64K +#define MX51_SPBA0_BASE_ADDR 0x70000000 +#define MX51_SPBA0_BASE_ADDR_VIRT 0xfb100000 +#define MX51_SPBA0_SIZE SZ_1M + +#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000) +#define MX51_ESDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000) +#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000) +#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000) +#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000) +#define MX51_ESDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000) +#define MX51_ESDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000) +#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000) +#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000) +#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000) +#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000) +#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000) /* - * Graphics Memory of GPU + * AIPS 1 */ -#define MX51_GPU_BASE_ADDR 0x20000000 -#define MX51_GPU2D_BASE_ADDR 0xD0000000 +#define MX51_AIPS1_BASE_ADDR 0x73f00000 +#define MX51_AIPS1_BASE_ADDR_VIRT 0xfb000000 +#define MX51_AIPS1_SIZE SZ_1M + +#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000) +#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000) +#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000) +#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000) +#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000) +#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000) +#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000) +#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000) +#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000) +#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000) +#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000) +#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000) +#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000) +#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000) +#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000) +#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000) +#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000) +#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000) +#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000) +#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000) -#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000 -#define MX51_TZIC_BASE_ADDR 0xE0000000 +/* + * AIPS 2 + */ +#define MX51_AIPS2_BASE_ADDR 0x83f00000 +#define MX51_AIPS2_BASE_ADDR_VIRT 0xfb200000 +#define MX51_AIPS2_SIZE SZ_1M -#define MX51_DEBUG_BASE_ADDR 0x60000000 -#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 -#define MX51_DEBUG_SIZE SZ_1M -#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000) -#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000) -#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000) -#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000) -#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000) -#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000) -#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000) -#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000) +#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000) +#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000) +#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000) +#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000) +#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000) +#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000) +#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000) +#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000) +#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000) +#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000) +#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000) +#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000) +#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000) +#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000) +#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000) +#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000) +#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000) +#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000) +#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000) +#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000) +#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000) +#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000) +#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000) +#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00) +#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000) +#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000) +#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000) +#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000) +#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000) +#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000) +#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000) +#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000) + +#define MX51_CSD0_BASE_ADDR 0x90000000 +#define MX51_CSD1_BASE_ADDR 0xa0000000 +#define MX51_CS0_BASE_ADDR 0xb0000000 +#define MX51_CS1_BASE_ADDR 0xb8000000 +#define MX51_CS2_BASE_ADDR 0xc0000000 +#define MX51_CS3_BASE_ADDR 0xc8000000 +#define MX51_CS4_BASE_ADDR 0xcc000000 +#define MX51_CS5_BASE_ADDR 0xce000000 /* - * SPBA global module enabled #0 + * NFC */ -#define MX51_SPBA0_BASE_ADDR 0x70000000 -#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000 -#define MX51_SPBA0_SIZE SZ_1M +#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */ +#define MX51_NFC_AXI_SIZE SZ_64K + +#define MX51_GPU2D_BASE_ADDR 0xd0000000 +#define MX51_TZIC_BASE_ADDR 0xe0000000 -#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000) -#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000) -#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000) -#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000) -#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000) -#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000) -#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000) -#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000) -#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000) -#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000) -#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000) -#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000) +#define MX51_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX51_IRAM) ?: \ + IMX_IO_ADDRESS(x, MX51_DEBUG) ?: \ + IMX_IO_ADDRESS(x, MX51_SPBA0) ?: \ + IMX_IO_ADDRESS(x, MX51_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX51_AIPS2)) + +/* This is currently used in <mach/debug-macro.S>, but should go away */ +#define MX51_AIPS1_IO_ADDRESS(x) \ + (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) /* * defines for SPBA modules */ #define MX51_SPBA_SDHC1 0x04 #define MX51_SPBA_SDHC2 0x08 -#define MX51_SPBA_UART3 0x0C +#define MX51_SPBA_UART3 0x0c #define MX51_SPBA_CSPI1 0x10 #define MX51_SPBA_SSI2 0x14 #define MX51_SPBA_SDHC3 0x20 @@ -103,35 +188,7 @@ #define MX51_SPBA_ATA 0x30 #define MX51_SPBA_SLIM 0x34 #define MX51_SPBA_HSI2C 0x38 -#define MX51_SPBA_CTRL 0x3C - -/* - * AIPS 1 - */ -#define MX51_AIPS1_BASE_ADDR 0x73F00000 -#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000 -#define MX51_AIPS1_SIZE SZ_1M - -#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000) -#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000) -#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000) -#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000) -#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000) -#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000) -#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000) -#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000) -#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000) -#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000) -#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000) -#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000) -#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000) -#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000) -#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000) -#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000) -#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000) -#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000) -#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000) -#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000) +#define MX51_SPBA_CTRL 0x3c /* * Defines for modules using static and dynamic DMA channels @@ -164,282 +221,186 @@ #define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL #define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL -/* - * AIPS 2 - */ -#define MX51_AIPS2_BASE_ADDR 0x83F00000 -#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000 -#define MX51_AIPS2_SIZE SZ_1M - -#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000) -#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000) -#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000) -#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000) -#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000) -#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000) -#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000) -#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000) -#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000) -#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000) -#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000) -#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000) -#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000) -#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000) -#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000) -#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000) -#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000) -#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000) -#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000) -#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000) -#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000) -#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000) -#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000) -#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00) -#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000) -#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000) -#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000) -#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000) -#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000) -#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000) -#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000) -#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000) - -/* - * Memory regions and CS - */ -#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 -#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 -#define MX51_CSD0_BASE_ADDR 0x90000000 -#define MX51_CSD1_BASE_ADDR 0xA0000000 -#define MX51_CS0_BASE_ADDR 0xB0000000 -#define MX51_CS1_BASE_ADDR 0xB8000000 -#define MX51_CS2_BASE_ADDR 0xC0000000 -#define MX51_CS3_BASE_ADDR 0xC8000000 -#define MX51_CS4_BASE_ADDR 0xCC000000 -#define MX51_CS5_BASE_ADDR 0xCE000000 - -/* Does given address belongs to the specified memory region? */ -#define ADDRESS_IN_REGION(addr, start, size) \ - (((addr) >= (start)) && ((addr) < (start)+(size))) - -/* Does given address belongs to the specified named `module'? */ -#define MX51_IS_MODULE(addr, module) \ - ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \ - MX51_ ## module ## _SIZE) -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ - -#define MX51_IO_ADDRESS(x) \ - (void __iomem *) \ - (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ -#define MX51_IRAM_IO_ADDRESS(x) \ - (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) - -#define MX51_DEBUG_IO_ADDRESS(x) \ - (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) - -#define MX51_SPBA0_IO_ADDRESS(x) \ - (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT) - -#define MX51_AIPS1_IO_ADDRESS(x) \ - (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) - -#define MX51_AIPS2_IO_ADDRESS(x) \ - (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) - #define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 /* * DMA request assignments */ -#define MX51_DMA_REQ_SSI3_TX1 47 -#define MX51_DMA_REQ_SSI3_RX1 46 -#define MX51_DMA_REQ_SPDIF 45 -#define MX51_DMA_REQ_UART3_TX 44 -#define MX51_DMA_REQ_UART3_RX 43 -#define MX51_DMA_REQ_SLIM_B_TX 42 -#define MX51_DMA_REQ_SDHC4 41 -#define MX51_DMA_REQ_SDHC3 40 -#define MX51_DMA_REQ_CSPI_TX 39 -#define MX51_DMA_REQ_CSPI_RX 38 -#define MX51_DMA_REQ_SSI3_TX2 37 -#define MX51_DMA_REQ_IPU 36 -#define MX51_DMA_REQ_SSI3_RX2 35 -#define MX51_DMA_REQ_EPIT2 34 -#define MX51_DMA_REQ_CTI2_1 33 -#define MX51_DMA_REQ_EMI_WR 32 -#define MX51_DMA_REQ_CTI2_0 31 -#define MX51_DMA_REQ_EMI_RD 30 -#define MX51_DMA_REQ_SSI1_TX1 29 -#define MX51_DMA_REQ_SSI1_RX1 28 -#define MX51_DMA_REQ_SSI1_TX2 27 -#define MX51_DMA_REQ_SSI1_RX2 26 -#define MX51_DMA_REQ_SSI2_TX1 25 -#define MX51_DMA_REQ_SSI2_RX1 24 -#define MX51_DMA_REQ_SSI2_TX2 23 -#define MX51_DMA_REQ_SSI2_RX2 22 -#define MX51_DMA_REQ_SDHC2 21 -#define MX51_DMA_REQ_SDHC1 20 -#define MX51_DMA_REQ_UART1_TX 19 -#define MX51_DMA_REQ_UART1_RX 18 -#define MX51_DMA_REQ_UART2_TX 17 -#define MX51_DMA_REQ_UART2_RX 16 -#define MX51_DMA_REQ_GPU 15 -#define MX51_DMA_REQ_EXTREQ1 14 -#define MX51_DMA_REQ_FIRI_TX 13 -#define MX51_DMA_REQ_FIRI_RX 12 -#define MX51_DMA_REQ_HS_I2C_RX 11 -#define MX51_DMA_REQ_HS_I2C_TX 10 -#define MX51_DMA_REQ_CSPI2_TX 9 -#define MX51_DMA_REQ_CSPI2_RX 8 -#define MX51_DMA_REQ_CSPI1_TX 7 -#define MX51_DMA_REQ_CSPI1_RX 6 -#define MX51_DMA_REQ_SLIM_B 5 -#define MX51_DMA_REQ_ATA_TX_END 4 -#define MX51_DMA_REQ_ATA_TX 3 -#define MX51_DMA_REQ_ATA_RX 2 -#define MX51_DMA_REQ_GPC 1 -#define MX51_DMA_REQ_VPU 0 +#define MX51_DMA_REQ_VPU 0 +#define MX51_DMA_REQ_GPC 1 +#define MX51_DMA_REQ_ATA_RX 2 +#define MX51_DMA_REQ_ATA_TX 3 +#define MX51_DMA_REQ_ATA_TX_END 4 +#define MX51_DMA_REQ_SLIM_B 5 +#define MX51_DMA_REQ_CSPI1_RX 6 +#define MX51_DMA_REQ_CSPI1_TX 7 +#define MX51_DMA_REQ_CSPI2_RX 8 +#define MX51_DMA_REQ_CSPI2_TX 9 +#define MX51_DMA_REQ_HS_I2C_TX 10 +#define MX51_DMA_REQ_HS_I2C_RX 11 +#define MX51_DMA_REQ_FIRI_RX 12 +#define MX51_DMA_REQ_FIRI_TX 13 +#define MX51_DMA_REQ_EXTREQ1 14 +#define MX51_DMA_REQ_GPU 15 +#define MX51_DMA_REQ_UART2_RX 16 +#define MX51_DMA_REQ_UART2_TX 17 +#define MX51_DMA_REQ_UART1_RX 18 +#define MX51_DMA_REQ_UART1_TX 19 +#define MX51_DMA_REQ_SDHC1 20 +#define MX51_DMA_REQ_SDHC2 21 +#define MX51_DMA_REQ_SSI2_RX1 22 +#define MX51_DMA_REQ_SSI2_TX1 23 +#define MX51_DMA_REQ_SSI2_RX0 24 +#define MX51_DMA_REQ_SSI2_TX0 25 +#define MX51_DMA_REQ_SSI1_RX1 26 +#define MX51_DMA_REQ_SSI1_TX1 27 +#define MX51_DMA_REQ_SSI1_RX0 28 +#define MX51_DMA_REQ_SSI1_TX0 29 +#define MX51_DMA_REQ_EMI_RD 30 +#define MX51_DMA_REQ_CTI2_0 31 +#define MX51_DMA_REQ_EMI_WR 32 +#define MX51_DMA_REQ_CTI2_1 33 +#define MX51_DMA_REQ_EPIT2 34 +#define MX51_DMA_REQ_SSI3_RX2 35 +#define MX51_DMA_REQ_IPU 36 +#define MX51_DMA_REQ_SSI3_TX2 37 +#define MX51_DMA_REQ_CSPI_RX 38 +#define MX51_DMA_REQ_CSPI_TX 39 +#define MX51_DMA_REQ_SDHC3 40 +#define MX51_DMA_REQ_SDHC4 41 +#define MX51_DMA_REQ_SLIM_B_TX 42 +#define MX51_DMA_REQ_UART3_RX 43 +#define MX51_DMA_REQ_UART3_TX 44 +#define MX51_DMA_REQ_SPDIF 45 +#define MX51_DMA_REQ_SSI3_RX1 46 +#define MX51_DMA_REQ_SSI3_TX1 47 /* * Interrupt numbers */ -#define MX51_MXC_INT_BASE 0 -#define MX51_MXC_INT_RESV0 0 -#define MX51_MXC_INT_MMC_SDHC1 1 -#define MX51_MXC_INT_MMC_SDHC2 2 -#define MX51_MXC_INT_MMC_SDHC3 3 -#define MX51_MXC_INT_MMC_SDHC4 4 -#define MX51_MXC_INT_RESV5 5 -#define MX51_MXC_INT_SDMA 6 -#define MX51_MXC_INT_IOMUX 7 -#define MX51_MXC_INT_NFC 8 -#define MX51_MXC_INT_VPU 9 -#define MX51_MXC_INT_IPU_ERR 10 -#define MX51_MXC_INT_IPU_SYN 11 -#define MX51_MXC_INT_GPU 12 -#define MX51_MXC_INT_RESV13 13 -#define MX51_MXC_INT_USB_H1 14 -#define MX51_MXC_INT_EMI 15 -#define MX51_MXC_INT_USB_H2 16 -#define MX51_MXC_INT_USB_H3 17 -#define MX51_MXC_INT_USB_OTG 18 -#define MX51_MXC_INT_SAHARA_H0 19 -#define MX51_MXC_INT_SAHARA_H1 20 -#define MX51_MXC_INT_SCC_SMN 21 -#define MX51_MXC_INT_SCC_STZ 22 -#define MX51_MXC_INT_SCC_SCM 23 -#define MX51_MXC_INT_SRTC_NTZ 24 -#define MX51_MXC_INT_SRTC_TZ 25 -#define MX51_MXC_INT_RTIC 26 -#define MX51_MXC_INT_CSU 27 -#define MX51_MXC_INT_SLIM_B 28 -#define MX51_MXC_INT_SSI1 29 -#define MX51_MXC_INT_SSI2 30 -#define MX51_MXC_INT_UART1 31 -#define MX51_MXC_INT_UART2 32 -#define MX51_MXC_INT_UART3 33 -#define MX51_MXC_INT_RESV34 34 -#define MX51_MXC_INT_RESV35 35 -#define MX51_MXC_INT_CSPI1 36 -#define MX51_MXC_INT_CSPI2 37 -#define MX51_MXC_INT_CSPI 38 -#define MX51_MXC_INT_GPT 39 -#define MX51_MXC_INT_EPIT1 40 -#define MX51_MXC_INT_EPIT2 41 -#define MX51_MXC_INT_GPIO1_INT7 42 -#define MX51_MXC_INT_GPIO1_INT6 43 -#define MX51_MXC_INT_GPIO1_INT5 44 -#define MX51_MXC_INT_GPIO1_INT4 45 -#define MX51_MXC_INT_GPIO1_INT3 46 -#define MX51_MXC_INT_GPIO1_INT2 47 -#define MX51_MXC_INT_GPIO1_INT1 48 -#define MX51_MXC_INT_GPIO1_INT0 49 -#define MX51_MXC_INT_GPIO1_LOW 50 -#define MX51_MXC_INT_GPIO1_HIGH 51 -#define MX51_MXC_INT_GPIO2_LOW 52 -#define MX51_MXC_INT_GPIO2_HIGH 53 -#define MX51_MXC_INT_GPIO3_LOW 54 -#define MX51_MXC_INT_GPIO3_HIGH 55 -#define MX51_MXC_INT_GPIO4_LOW 56 -#define MX51_MXC_INT_GPIO4_HIGH 57 -#define MX51_MXC_INT_WDOG1 58 -#define MX51_MXC_INT_WDOG2 59 -#define MX51_MXC_INT_KPP 60 -#define MX51_MXC_INT_PWM1 61 -#define MX51_MXC_INT_I2C1 62 -#define MX51_MXC_INT_I2C2 63 -#define MX51_MXC_INT_HS_I2C 64 -#define MX51_MXC_INT_RESV65 65 -#define MX51_MXC_INT_RESV66 66 -#define MX51_MXC_INT_SIM_IPB 67 -#define MX51_MXC_INT_SIM_DAT 68 -#define MX51_MXC_INT_IIM 69 -#define MX51_MXC_INT_ATA 70 -#define MX51_MXC_INT_CCM1 71 -#define MX51_MXC_INT_CCM2 72 -#define MX51_MXC_INT_GPC1 73 -#define MX51_MXC_INT_GPC2 74 -#define MX51_MXC_INT_SRC 75 -#define MX51_MXC_INT_NM 76 -#define MX51_MXC_INT_PMU 77 -#define MX51_MXC_INT_CTI_IRQ 78 -#define MX51_MXC_INT_CTI1_TG0 79 -#define MX51_MXC_INT_CTI1_TG1 80 -#define MX51_MXC_INT_MCG_ERR 81 -#define MX51_MXC_INT_MCG_TMR 82 -#define MX51_MXC_INT_MCG_FUNC 83 -#define MX51_MXC_INT_GPU2_IRQ 84 -#define MX51_MXC_INT_GPU2_BUSY 85 -#define MX51_MXC_INT_RESV86 86 -#define MX51_MXC_INT_FEC 87 -#define MX51_MXC_INT_OWIRE 88 -#define MX51_MXC_INT_CTI1_TG2 89 -#define MX51_MXC_INT_SJC 90 -#define MX51_MXC_INT_SPDIF 91 -#define MX51_MXC_INT_TVE 92 -#define MX51_MXC_INT_FIRI 93 -#define MX51_MXC_INT_PWM2 94 -#define MX51_MXC_INT_SLIM_EXP 95 -#define MX51_MXC_INT_SSI3 96 -#define MX51_MXC_INT_EMI_BOOT 97 -#define MX51_MXC_INT_CTI1_TG3 98 -#define MX51_MXC_INT_SMC_RX 99 -#define MX51_MXC_INT_VPU_IDLE 100 -#define MX51_MXC_INT_EMI_NFC 101 -#define MX51_MXC_INT_GPU_IDLE 102 +#define MX51_MXC_INT_BASE 0 +#define MX51_MXC_INT_RESV0 0 +#define MX51_INT_ESDHC1 1 +#define MX51_INT_ESDHC2 2 +#define MX51_INT_ESDHC3 3 +#define MX51_INT_ESDHC4 4 +#define MX51_MXC_INT_RESV5 5 +#define MX51_INT_SDMA 6 +#define MX51_MXC_INT_IOMUX 7 +#define MX51_INT_NFC 8 +#define MX51_MXC_INT_VPU 9 +#define MX51_MXC_INT_IPU_ERR 10 +#define MX51_MXC_INT_IPU_SYN 11 +#define MX51_MXC_INT_GPU 12 +#define MX51_MXC_INT_RESV13 13 +#define MX51_MXC_INT_USB_H1 14 +#define MX51_MXC_INT_EMI 15 +#define MX51_MXC_INT_USB_H2 16 +#define MX51_MXC_INT_USB_H3 17 +#define MX51_MXC_INT_USB_OTG 18 +#define MX51_MXC_INT_SAHARA_H0 19 +#define MX51_MXC_INT_SAHARA_H1 20 +#define MX51_MXC_INT_SCC_SMN 21 +#define MX51_MXC_INT_SCC_STZ 22 +#define MX51_MXC_INT_SCC_SCM 23 +#define MX51_MXC_INT_SRTC_NTZ 24 +#define MX51_MXC_INT_SRTC_TZ 25 +#define MX51_MXC_INT_RTIC 26 +#define MX51_MXC_INT_CSU 27 +#define MX51_MXC_INT_SLIM_B 28 +#define MX51_INT_SSI1 29 +#define MX51_INT_SSI2 30 +#define MX51_INT_UART1 31 +#define MX51_INT_UART2 32 +#define MX51_INT_UART3 33 +#define MX51_MXC_INT_RESV34 34 +#define MX51_MXC_INT_RESV35 35 +#define MX51_INT_ECSPI1 36 +#define MX51_INT_ECSPI2 37 +#define MX51_INT_CSPI 38 +#define MX51_MXC_INT_GPT 39 +#define MX51_MXC_INT_EPIT1 40 +#define MX51_MXC_INT_EPIT2 41 +#define MX51_MXC_INT_GPIO1_INT7 42 +#define MX51_MXC_INT_GPIO1_INT6 43 +#define MX51_MXC_INT_GPIO1_INT5 44 +#define MX51_MXC_INT_GPIO1_INT4 45 +#define MX51_MXC_INT_GPIO1_INT3 46 +#define MX51_MXC_INT_GPIO1_INT2 47 +#define MX51_MXC_INT_GPIO1_INT1 48 +#define MX51_MXC_INT_GPIO1_INT0 49 +#define MX51_MXC_INT_GPIO1_LOW 50 +#define MX51_MXC_INT_GPIO1_HIGH 51 +#define MX51_MXC_INT_GPIO2_LOW 52 +#define MX51_MXC_INT_GPIO2_HIGH 53 +#define MX51_MXC_INT_GPIO3_LOW 54 +#define MX51_MXC_INT_GPIO3_HIGH 55 +#define MX51_MXC_INT_GPIO4_LOW 56 +#define MX51_MXC_INT_GPIO4_HIGH 57 +#define MX51_MXC_INT_WDOG1 58 +#define MX51_MXC_INT_WDOG2 59 +#define MX51_MXC_INT_KPP 60 +#define MX51_MXC_INT_PWM1 61 +#define MX51_INT_I2C1 62 +#define MX51_INT_I2C2 63 +#define MX51_MXC_INT_HS_I2C 64 +#define MX51_MXC_INT_RESV65 65 +#define MX51_MXC_INT_RESV66 66 +#define MX51_MXC_INT_SIM_IPB 67 +#define MX51_MXC_INT_SIM_DAT 68 +#define MX51_MXC_INT_IIM 69 +#define MX51_MXC_INT_ATA 70 +#define MX51_MXC_INT_CCM1 71 +#define MX51_MXC_INT_CCM2 72 +#define MX51_MXC_INT_GPC1 73 +#define MX51_MXC_INT_GPC2 74 +#define MX51_MXC_INT_SRC 75 +#define MX51_MXC_INT_NM 76 +#define MX51_MXC_INT_PMU 77 +#define MX51_MXC_INT_CTI_IRQ 78 +#define MX51_MXC_INT_CTI1_TG0 79 +#define MX51_MXC_INT_CTI1_TG1 80 +#define MX51_MXC_INT_MCG_ERR 81 +#define MX51_MXC_INT_MCG_TMR 82 +#define MX51_MXC_INT_MCG_FUNC 83 +#define MX51_MXC_INT_GPU2_IRQ 84 +#define MX51_MXC_INT_GPU2_BUSY 85 +#define MX51_MXC_INT_RESV86 86 +#define MX51_INT_FEC 87 +#define MX51_MXC_INT_OWIRE 88 +#define MX51_MXC_INT_CTI1_TG2 89 +#define MX51_MXC_INT_SJC 90 +#define MX51_MXC_INT_SPDIF 91 +#define MX51_MXC_INT_TVE 92 +#define MX51_MXC_INT_FIRI 93 +#define MX51_MXC_INT_PWM2 94 +#define MX51_MXC_INT_SLIM_EXP 95 +#define MX51_MXC_INT_SSI3 96 +#define MX51_MXC_INT_EMI_BOOT 97 +#define MX51_MXC_INT_CTI1_TG3 98 +#define MX51_MXC_INT_SMC_RX 99 +#define MX51_MXC_INT_VPU_IDLE 100 +#define MX51_MXC_INT_EMI_NFC 101 +#define MX51_MXC_INT_GPU_IDLE 102 /* silicon revisions specific to i.MX51 */ -#define MX51_CHIP_REV_1_0 0x10 -#define MX51_CHIP_REV_1_1 0x11 -#define MX51_CHIP_REV_1_2 0x12 -#define MX51_CHIP_REV_1_3 0x13 -#define MX51_CHIP_REV_2_0 0x20 -#define MX51_CHIP_REV_2_1 0x21 -#define MX51_CHIP_REV_2_2 0x22 -#define MX51_CHIP_REV_2_3 0x23 -#define MX51_CHIP_REV_3_0 0x30 -#define MX51_CHIP_REV_3_1 0x31 -#define MX51_CHIP_REV_3_2 0x32 - -/* Mandatory defines used globally */ +#define MX51_CHIP_REV_1_0 0x10 +#define MX51_CHIP_REV_1_1 0x11 +#define MX51_CHIP_REV_1_2 0x12 +#define MX51_CHIP_REV_1_3 0x13 +#define MX51_CHIP_REV_2_0 0x20 +#define MX51_CHIP_REV_2_1 0x21 +#define MX51_CHIP_REV_2_2 0x22 +#define MX51_CHIP_REV_2_3 0x23 +#define MX51_CHIP_REV_3_0 0x30 +#define MX51_CHIP_REV_3_1 0x31 +#define MX51_CHIP_REV_3_2 0x32 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - extern int mx51_revision(void); #endif -#endif /* __ASM_ARCH_MXC_MX51_H__ */ +/* tape-out 1 defines */ +#define MX51_TZIC_BASE_ADDR_TO1 0x8fffc000 + +#endif /* ifndef __MACH_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index a790bf21297..a42c7207082 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) * * This program is free software; you can redistribute it and/or @@ -20,6 +20,8 @@ #ifndef __ASM_ARCH_MXC_H__ #define __ASM_ARCH_MXC_H__ +#include <linux/types.h> + #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #error "Do not include directly." #endif @@ -133,6 +135,15 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mxc91231() (0) #endif +#ifndef __ASSEMBLY__ + +struct cpu_op { + u32 cpu_rate; +}; + +extern struct cpu_op *(*get_cpu_op)(int *op); +#endif + #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2) /* These are deprecated, use mx[23][157]_setup_weimcs instead. */ #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10)) diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h index 5182b986b78..0ca3101ebf3 100644 --- a/arch/arm/plat-mxc/include/mach/mxc91231.h +++ b/arch/arm/plat-mxc/include/mach/mxc91231.h @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __MACH_MXC91231_H__ #define __MACH_MXC91231_H__ diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 5d2d21d414e..04c0d060d81 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -20,9 +20,13 @@ #ifndef __ASM_ARCH_NAND_H #define __ASM_ARCH_NAND_H +#include <linux/mtd/partitions.h> + struct mxc_nand_platform_data { - int width; /* data bus width in bytes */ - int hw_ecc:1; /* 0 if supress hardware ECC */ - int flash_bbt:1; /* set to 1 to use a flash based bbt */ + unsigned int width; /* data bus width in bytes */ + unsigned int hw_ecc:1; /* 0 if supress hardware ECC */ + unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ + struct mtd_partition *parts; /* partition table */ + int nr_parts; /* size of parts */ }; #endif /* __ASM_ARCH_NAND_H */ diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h new file mode 100644 index 00000000000..9be112227ac --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/sdma.h @@ -0,0 +1,17 @@ +#ifndef __MACH_MXC_SDMA_H__ +#define __MACH_MXC_SDMA_H__ + +/** + * struct sdma_platform_data - platform specific data for SDMA engine + * + * @sdma_version The version of this SDMA engine + * @cpu_name used to generate the firmware name + * @to_version CPU Tape out version + */ +struct sdma_platform_data { + int sdma_version; + char *cpu_name; + int to_version; +}; + +#endif /* __MACH_MXC_SDMA_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h index c34ded523f1..63f3c280423 100644 --- a/arch/arm/plat-mxc/include/mach/ssi.h +++ b/arch/arm/plat-mxc/include/mach/ssi.h @@ -10,6 +10,9 @@ struct imx_ssi_platform_data { unsigned int flags; #define IMX_SSI_DMA (1 << 0) #define IMX_SSI_USE_AC97 (1 << 1) +#define IMX_SSI_NET (1 << 2) +#define IMX_SSI_SYN (1 << 3) +#define IMX_SSI_USE_I2S_SLAVE (1 << 4) void (*ac97_reset) (struct snd_ac97 *ac97); void (*ac97_warm_reset)(struct snd_ac97 *ac97); }; diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index ef00199568d..95be51bfe9a 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -1,7 +1,7 @@ /* * Copyright (C) 1999 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ @@ -32,8 +28,34 @@ static inline void arch_idle(void) mxc91231_prepare_idle(); } #endif - - cpu_do_idle(); + /* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */ + if (cpu_is_mx31() || cpu_is_mx35()) { + unsigned long reg = 0; + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); + } else + cpu_do_idle(); } void arch_reset(char mode, const char *cmd); diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 024416ed11c..2d9624697cc 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -11,10 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_TIMEX_H__ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index b6d3d0fddc4..9dd9c2085aa 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ #define __ASM_ARCH_MXC_UNCOMPRESS_H__ @@ -103,6 +99,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) uart_base = MX3X_UART2_BASE_ADDR; break; case MACH_TYPE_MX51_BABBAGE: + case MACH_TYPE_EUKREA_CPUIMX51SD: uart_base = MX51_UART1_BASE_ADDR; break; default: diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h index 44243a27843..ef6379c474b 100644 --- a/arch/arm/plat-mxc/include/mach/vmalloc.h +++ b/arch/arm/plat-mxc/include/mach/vmalloc.h @@ -11,10 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_MXC_VMALLOC_H__ diff --git a/arch/arm/plat-mxc/iram_alloc.c b/arch/arm/plat-mxc/iram_alloc.c new file mode 100644 index 00000000000..074c3869626 --- /dev/null +++ b/arch/arm/plat-mxc/iram_alloc.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/genalloc.h> +#include <mach/iram.h> + +static unsigned long iram_phys_base; +static void __iomem *iram_virt_base; +static struct gen_pool *iram_pool; + +static inline void __iomem *iram_phys_to_virt(unsigned long p) +{ + return iram_virt_base + (p - iram_phys_base); +} + +void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) +{ + if (!iram_pool) + return NULL; + + *dma_addr = gen_pool_alloc(iram_pool, size); + pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr); + if (!*dma_addr) + return NULL; + return iram_phys_to_virt(*dma_addr); +} +EXPORT_SYMBOL(iram_alloc); + +void iram_free(unsigned long addr, unsigned int size) +{ + if (!iram_pool) + return; + + gen_pool_free(iram_pool, addr, size); +} +EXPORT_SYMBOL(iram_free); + +int __init iram_init(unsigned long base, unsigned long size) +{ + iram_phys_base = base; + + iram_pool = gen_pool_create(PAGE_SHIFT, -1); + if (!iram_pool) + return -ENOMEM; + + gen_pool_add(iram_pool, base, size, -1); + iram_virt_base = ioremap(iram_phys_base, size); + if (!iram_virt_base) + return -EIO; + + pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base); + return 0; +} diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 778ddfe57d8..7331f2ace5f 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -142,9 +142,6 @@ void __init mxc_init_irq(void __iomem *irqbase) for (i = 0; i < 8; i++) __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); - /* init architectures chained interrupt handler */ - mxc_register_gpios(); - #ifdef CONFIG_FIQ /* Initialize FIQ */ init_FIQ(); diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 97f42799fa5..925bce4607e 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 9b86d2a60d4..3703ab28257 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -145,8 +145,6 @@ void __init tzic_init_irq(void __iomem *irqbase) set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); } - mxc_register_gpios(); - pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); } @@ -166,8 +164,9 @@ int tzic_enable_wake(int is_idle) return -EAGAIN; for (i = 0; i < 4; i++) { - v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i]; - __raw_writel(v, TZIC_WAKEUP0(i)); + v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) : + wakeup_intr[i]; + __raw_writel(v, tzic_base + TZIC_WAKEUP0(i)); } return 0; |