Merge branch 'next' into for-linus

10 files changed, 1528 insertions, 30 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index c44b9eafc55..b49e2337972 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -327,6 +327,17 @@ config INPUT_PCF8574
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcf8574_keypad.
 
+config INPUT_PWM_BEEPER
+	tristate "PWM beeper support"
+	depends on HAVE_PWM
+	help
+	  Say Y here to get support for PWM based beeper devices.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called pwm-beeper.
+
 config INPUT_GPIO_ROTARY_ENCODER
 	tristate "Rotary encoders connected to GPIO pins"
 	depends on GPIOLIB && GENERIC_GPIO
@@ -390,4 +401,41 @@ config INPUT_PCAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcap_keys.
 
+config INPUT_ADXL34X
+	tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
+	default n
+	help
+	  Say Y here if you have a Accelerometer interface using the
+	  ADXL345/6 controller, and your board-specific initialization
+	  code includes that in its table of devices.
+
+	  This driver can use either I2C or SPI communication to the
+	  ADXL345/6 controller.  Select the appropriate method for
+	  your system.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x.
+
+config INPUT_ADXL34X_I2C
+	tristate "support I2C bus connection"
+	depends on INPUT_ADXL34X && I2C
+	default y
+	help
+	  Say Y here if you have ADXL345/6 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x-i2c.
+
+config INPUT_ADXL34X_SPI
+	tristate "support SPI bus connection"
+	depends on INPUT_ADXL34X && SPI
+	default y
+	help
+	  Say Y here if you have ADXL345/6 hooked to a SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x-spi.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 71fe57d8023..19ccca78fa7 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -8,6 +8,9 @@ obj-$(CONFIG_INPUT_88PM860X_ONKEY)	+= 88pm860x_onkey.o
 obj-$(CONFIG_INPUT_AD714X)		+= ad714x.o
 obj-$(CONFIG_INPUT_AD714X_I2C)		+= ad714x-i2c.o
 obj-$(CONFIG_INPUT_AD714X_SPI)		+= ad714x-spi.o
+obj-$(CONFIG_INPUT_ADXL34X)		+= adxl34x.o
+obj-$(CONFIG_INPUT_ADXL34X_I2C)		+= adxl34x-i2c.o
+obj-$(CONFIG_INPUT_ADXL34X_SPI)		+= adxl34x-spi.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
@@ -26,6 +29,7 @@ obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
+obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
diff --git a/drivers/input/misc/adxl34x-i2c.c b/drivers/input/misc/adxl34x-i2c.c
new file mode 100644
index 00000000000..0779724af7e
--- /dev/null
+++ b/drivers/input/misc/adxl34x-i2c.c
@@ -0,0 +1,163 @@
+/*
+ * ADLX345/346 Three-Axis Digital Accelerometers (I2C Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include "adxl34x.h"
+
+static int adxl34x_smbus_read(struct device *dev, unsigned char reg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int adxl34x_smbus_write(struct device *dev,
+			       unsigned char reg, unsigned char val)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int adxl34x_smbus_read_block(struct device *dev,
+				    unsigned char reg, int count,
+				    void *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_read_i2c_block_data(client, reg, count, buf);
+}
+
+static int adxl34x_i2c_read_block(struct device *dev,
+				  unsigned char reg, int count,
+				  void *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_master_send(client, &reg, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_master_recv(client, buf, count);
+	if (ret < 0)
+		return ret;
+
+	if (ret != count)
+		return -EIO;
+
+	return 0;
+}
+
+static const struct adxl34x_bus_ops adxl34x_smbus_bops = {
+	.bustype	= BUS_I2C,
+	.write		= adxl34x_smbus_write,
+	.read		= adxl34x_smbus_read,
+	.read_block	= adxl34x_smbus_read_block,
+};
+
+static const struct adxl34x_bus_ops adxl34x_i2c_bops = {
+	.bustype	= BUS_I2C,
+	.write		= adxl34x_smbus_write,
+	.read		= adxl34x_smbus_read,
+	.read_block	= adxl34x_i2c_read_block,
+};
+
+static int __devinit adxl34x_i2c_probe(struct i2c_client *client,
+				       const struct i2c_device_id *id)
+{
+	struct adxl34x *ac;
+	int error;
+
+	error = i2c_check_functionality(client->adapter,
+			I2C_FUNC_SMBUS_BYTE_DATA);
+	if (!error) {
+		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+		return -EIO;
+	}
+
+	ac = adxl34x_probe(&client->dev, client->irq, false,
+			   i2c_check_functionality(client->adapter,
+						   I2C_FUNC_SMBUS_READ_I2C_BLOCK) ?
+				&adxl34x_smbus_bops : &adxl34x_i2c_bops);
+	if (IS_ERR(ac))
+		return PTR_ERR(ac);
+
+	i2c_set_clientdata(client, ac);
+
+	return 0;
+}
+
+static int __devexit adxl34x_i2c_remove(struct i2c_client *client)
+{
+	struct adxl34x *ac = i2c_get_clientdata(client);
+
+	return adxl34x_remove(ac);
+}
+
+#ifdef CONFIG_PM
+static int adxl34x_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+	struct adxl34x *ac = i2c_get_clientdata(client);
+
+	adxl34x_suspend(ac);
+
+	return 0;
+}
+
+static int adxl34x_i2c_resume(struct i2c_client *client)
+{
+	struct adxl34x *ac = i2c_get_clientdata(client);
+
+	adxl34x_resume(ac);
+
+	return 0;
+}
+#else
+# define adxl34x_i2c_suspend NULL
+# define adxl34x_i2c_resume  NULL
+#endif
+
+static const struct i2c_device_id adxl34x_id[] = {
+	{ "adxl34x", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, adxl34x_id);
+
+static struct i2c_driver adxl34x_driver = {
+	.driver = {
+		.name = "adxl34x",
+		.owner = THIS_MODULE,
+	},
+	.probe    = adxl34x_i2c_probe,
+	.remove   = __devexit_p(adxl34x_i2c_remove),
+	.suspend  = adxl34x_i2c_suspend,
+	.resume   = adxl34x_i2c_resume,
+	.id_table = adxl34x_id,
+};
+
+static int __init adxl34x_i2c_init(void)
+{
+	return i2c_add_driver(&adxl34x_driver);
+}
+module_init(adxl34x_i2c_init);
+
+static void __exit adxl34x_i2c_exit(void)
+{
+	i2c_del_driver(&adxl34x_driver);
+}
+module_exit(adxl34x_i2c_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer I2C Bus Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c
new file mode 100644
index 00000000000..782de9e8982
--- /dev/null
+++ b/drivers/input/misc/adxl34x-spi.c
@@ -0,0 +1,145 @@
+/*
+ * ADLX345/346 Three-Axis Digital Accelerometers (SPI Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_SPI */
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include "adxl34x.h"
+
+#define MAX_SPI_FREQ_HZ		5000000
+#define MAX_FREQ_NO_FIFODELAY	1500000
+#define ADXL34X_CMD_MULTB	(1 << 6)
+#define ADXL34X_CMD_READ	(1 << 7)
+#define ADXL34X_WRITECMD(reg)	(reg & 0x3F)
+#define ADXL34X_READCMD(reg)	(ADXL34X_CMD_READ | (reg & 0x3F))
+#define ADXL34X_READMB_CMD(reg) (ADXL34X_CMD_READ | ADXL34X_CMD_MULTB \
+					| (reg & 0x3F))
+
+static int adxl34x_spi_read(struct device *dev, unsigned char reg)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char cmd;
+
+	cmd = ADXL34X_READCMD(reg);
+
+	return spi_w8r8(spi, cmd);
+}
+
+static int adxl34x_spi_write(struct device *dev,
+			     unsigned char reg, unsigned char val)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	buf[0] = ADXL34X_WRITECMD(reg);
+	buf[1] = val;
+
+	return spi_write(spi, buf, sizeof(buf));
+}
+
+static int adxl34x_spi_read_block(struct device *dev,
+				  unsigned char reg, int count,
+				  void *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	ssize_t status;
+
+	reg = ADXL34X_READMB_CMD(reg);
+	status = spi_write_then_read(spi, &reg, 1, buf, count);
+
+	return (status < 0) ? status : 0;
+}
+
+static const struct adxl34x_bus_ops adx134x_spi_bops = {
+	.bustype	= BUS_SPI,
+	.write		= adxl34x_spi_write,
+	.read		= adxl34x_spi_read,
+	.read_block	= adxl34x_spi_read_block,
+};
+
+static int __devinit adxl34x_spi_probe(struct spi_device *spi)
+{
+	struct adxl34x *ac;
+
+	/* don't exceed max specified SPI CLK frequency */
+	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+		dev_err(&spi->dev, "SPI CLK %d Hz too fast\n", spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	ac = adxl34x_probe(&spi->dev, spi->irq,
+			   spi->max_speed_hz > MAX_FREQ_NO_FIFODELAY,
+			   &adx134x_spi_bops);
+
+	if (IS_ERR(ac))
+		return PTR_ERR(ac);
+
+	spi_set_drvdata(spi, ac);
+
+	return 0;
+}
+
+static int __devexit adxl34x_spi_remove(struct spi_device *spi)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	return adxl34x_remove(ac);
+}
+
+#ifdef CONFIG_PM
+static int adxl34x_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	adxl34x_suspend(ac);
+
+	return 0;
+}
+
+static int adxl34x_spi_resume(struct spi_device *spi)
+{
+	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+
+	adxl34x_resume(ac);
+
+	return 0;
+}
+#else
+# define adxl34x_spi_suspend NULL
+# define adxl34x_spi_resume  NULL
+#endif
+
+static struct spi_driver adxl34x_driver = {
+	.driver = {
+		.name = "adxl34x",
+		.bus = &spi_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe   = adxl34x_spi_probe,
+	.remove  = __devexit_p(adxl34x_spi_remove),
+	.suspend = adxl34x_spi_suspend,
+	.resume  = adxl34x_spi_resume,
+};
+
+static int __init adxl34x_spi_init(void)
+{
+	return spi_register_driver(&adxl34x_driver);
+}
+module_init(adxl34x_spi_init);
+
+static void __exit adxl34x_spi_exit(void)
+{
+	spi_unregister_driver(&adxl34x_driver);
+}
+module_exit(adxl34x_spi_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer SPI Bus Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
new file mode 100644
index 00000000000..e2ca0170808
--- /dev/null
+++ b/drivers/input/misc/adxl34x.c
@@ -0,0 +1,915 @@
+/*
+ * ADXL345/346 Three-Axis Digital Accelerometers
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/input/adxl34x.h>
+
+#include "adxl34x.h"
+
+/* ADXL345/6 Register Map */
+#define DEVID		0x00	/* R   Device ID */
+#define THRESH_TAP	0x1D	/* R/W Tap threshold */
+#define OFSX		0x1E	/* R/W X-axis offset */
+#define OFSY		0x1F	/* R/W Y-axis offset */
+#define OFSZ		0x20	/* R/W Z-axis offset */
+#define DUR		0x21	/* R/W Tap duration */
+#define LATENT		0x22	/* R/W Tap latency */
+#define WINDOW		0x23	/* R/W Tap window */
+#define THRESH_ACT	0x24	/* R/W Activity threshold */
+#define THRESH_INACT	0x25	/* R/W Inactivity threshold */
+#define TIME_INACT	0x26	/* R/W Inactivity time */
+#define ACT_INACT_CTL	0x27	/* R/W Axis enable control for activity and */
+				/* inactivity detection */
+#define THRESH_FF	0x28	/* R/W Free-fall threshold */
+#define TIME_FF		0x29	/* R/W Free-fall time */
+#define TAP_AXES	0x2A	/* R/W Axis control for tap/double tap */
+#define ACT_TAP_STATUS	0x2B	/* R   Source of tap/double tap */
+#define BW_RATE		0x2C	/* R/W Data rate and power mode control */
+#define POWER_CTL	0x2D	/* R/W Power saving features control */
+#define INT_ENABLE	0x2E	/* R/W Interrupt enable control */
+#define INT_MAP		0x2F	/* R/W Interrupt mapping control */
+#define INT_SOURCE	0x30	/* R   Source of interrupts */
+#define DATA_FORMAT	0x31	/* R/W Data format control */
+#define DATAX0		0x32	/* R   X-Axis Data 0 */
+#define DATAX1		0x33	/* R   X-Axis Data 1 */
+#define DATAY0		0x34	/* R   Y-Axis Data 0 */
+#define DATAY1		0x35	/* R   Y-Axis Data 1 */
+#define DATAZ0		0x36	/* R   Z-Axis Data 0 */
+#define DATAZ1		0x37	/* R   Z-Axis Data 1 */
+#define FIFO_CTL	0x38	/* R/W FIFO control */
+#define FIFO_STATUS	0x39	/* R   FIFO status */
+#define TAP_SIGN	0x3A	/* R   Sign and source for tap/double tap */
+/* Orientation ADXL346 only */
+#define ORIENT_CONF	0x3B	/* R/W Orientation configuration */
+#define ORIENT		0x3C	/* R   Orientation status */
+
+/* DEVIDs */
+#define ID_ADXL345	0xE5
+#define ID_ADXL346	0xE6
+
+/* INT_ENABLE/INT_MAP/INT_SOURCE Bits */
+#define DATA_READY	(1 << 7)
+#define SINGLE_TAP	(1 << 6)
+#define DOUBLE_TAP	(1 << 5)
+#define ACTIVITY	(1 << 4)
+#define INACTIVITY	(1 << 3)
+#define FREE_FALL	(1 << 2)
+#define WATERMARK	(1 << 1)
+#define OVERRUN		(1 << 0)
+
+/* ACT_INACT_CONTROL Bits */
+#define ACT_ACDC	(1 << 7)
+#define ACT_X_EN	(1 << 6)
+#define ACT_Y_EN	(1 << 5)
+#define ACT_Z_EN	(1 << 4)
+#define INACT_ACDC	(1 << 3)
+#define INACT_X_EN	(1 << 2)
+#define INACT_Y_EN	(1 << 1)
+#define INACT_Z_EN	(1 << 0)
+
+/* TAP_AXES Bits */
+#define SUPPRESS	(1 << 3)
+#define TAP_X_EN	(1 << 2)
+#define TAP_Y_EN	(1 << 1)
+#define TAP_Z_EN	(1 << 0)
+
+/* ACT_TAP_STATUS Bits */
+#define ACT_X_SRC	(1 << 6)
+#define ACT_Y_SRC	(1 << 5)
+#define ACT_Z_SRC	(1 << 4)
+#define ASLEEP		(1 << 3)
+#define TAP_X_SRC	(1 << 2)
+#define TAP_Y_SRC	(1 << 1)
+#define TAP_Z_SRC	(1 << 0)
+
+/* BW_RATE Bits */
+#define LOW_POWER	(1 << 4)
+#define RATE(x)		((x) & 0xF)
+
+/* POWER_CTL Bits */
+#define PCTL_LINK	(1 << 5)
+#define PCTL_AUTO_SLEEP (1 << 4)
+#define PCTL_MEASURE	(1 << 3)
+#define PCTL_SLEEP	(1 << 2)
+#define PCTL_WAKEUP(x)	((x) & 0x3)
+
+/* DATA_FORMAT Bits */
+#define SELF_TEST	(1 << 7)
+#define SPI		(1 << 6)
+#define INT_INVERT	(1 << 5)
+#define FULL_RES	(1 << 3)
+#define JUSTIFY		(1 << 2)
+#define RANGE(x)	((x) & 0x3)
+#define RANGE_PM_2g	0
+#define RANGE_PM_4g	1
+#define RANGE_PM_8g	2
+#define RANGE_PM_16g	3
+
+/*
+ * Maximum value our axis may get in full res mode for the input device
+ * (signed 13 bits)
+ */
+#define ADXL_FULLRES_MAX_VAL 4096
+
+/*
+ * Maximum value our axis may get in fixed res mode for the input device
+ * (signed 10 bits)
+ */
+#define ADXL_FIXEDRES_MAX_VAL 512
+
+/* FIFO_CTL Bits */
+#define FIFO_MODE(x)	(((x) & 0x3) << 6)
+#define FIFO_BYPASS	0
+#define FIFO_FIFO	1
+#define FIFO_STREAM	2
+#define FIFO_TRIGGER	3
+#define TRIGGER		(1 << 5)
+#define SAMPLES(x)	((x) & 0x1F)
+
+/* FIFO_STATUS Bits */
+#define FIFO_TRIG	(1 << 7)
+#define ENTRIES(x)	((x) & 0x3F)
+
+/* TAP_SIGN Bits ADXL346 only */
+#define XSIGN		(1 << 6)
+#define YSIGN		(1 << 5)
+#define ZSIGN		(1 << 4)
+#define XTAP		(1 << 3)
+#define YTAP		(1 << 2)
+#define ZTAP		(1 << 1)
+
+/* ORIENT_CONF ADXL346 only */
+#define ORIENT_DEADZONE(x)	(((x) & 0x7) << 4)
+#define ORIENT_DIVISOR(x)	((x) & 0x7)
+
+/* ORIENT ADXL346 only */
+#define ADXL346_2D_VALID		(1 << 6)
+#define ADXL346_2D_ORIENT(x)		(((x) & 0x3) >> 4)
+#define ADXL346_3D_VALID		(1 << 3)
+#define ADXL346_3D_ORIENT(x)		((x) & 0x7)
+#define ADXL346_2D_PORTRAIT_POS		0	/* +X */
+#define ADXL346_2D_PORTRAIT_NEG		1	/* -X */
+#define ADXL346_2D_LANDSCAPE_POS	2	/* +Y */
+#define ADXL346_2D_LANDSCAPE_NEG	3	/* -Y */
+
+#define ADXL346_3D_FRONT		3	/* +X */
+#define ADXL346_3D_BACK			4	/* -X */
+#define ADXL346_3D_RIGHT		2	/* +Y */
+#define ADXL346_3D_LEFT			5	/* -Y */
+#define ADXL346_3D_TOP			1	/* +Z */
+#define ADXL346_3D_BOTTOM		6	/* -Z */
+
+#undef ADXL_DEBUG
+
+#define ADXL_X_AXIS			0
+#define ADXL_Y_AXIS			1
+#define ADXL_Z_AXIS			2
+
+#define AC_READ(ac, reg)	((ac)->bops->read((ac)->dev, reg))
+#define AC_WRITE(ac, reg, val)	((ac)->bops->write((ac)->dev, reg, val))
+
+struct axis_triple {
+	int x;
+	int y;
+	int z;
+};
+
+struct adxl34x {
+	struct device *dev;
+	struct input_dev *input;
+	struct mutex mutex;	/* reentrant protection for struct */
+	struct adxl34x_platform_data pdata;
+	struct axis_triple swcal;
+	struct axis_triple hwcal;
+	struct axis_triple saved;
+	char phys[32];
+	unsigned orient2d_saved;
+	unsigned orient3d_saved;
+	bool disabled;	/* P: mutex */
+	bool opened;	/* P: mutex */
+	bool suspended;	/* P: mutex */
+	bool fifo_delay;
+	int irq;
+	unsigned model;
+	unsigned int_mask;
+
+	const struct adxl34x_bus_ops *bops;
+};
+
+static const struct adxl34x_platform_data adxl34x_default_init = {
+	.tap_threshold = 35,
+	.tap_duration = 3,
+	.tap_latency = 20,
+	.tap_window = 20,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 6,
+	.inactivity_threshold = 4,
+	.inactivity_time = 3,
+	.free_fall_threshold = 8,
+	.free_fall_time = 0x20,
+	.data_rate = 8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,	/* EV_REL */
+	.ev_code_y = ABS_Y,	/* EV_REL */
+	.ev_code_z = ABS_Z,	/* EV_REL */
+
+	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY {x,y,z} */
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = FIFO_STREAM,
+	.watermark = 0,
+};
+
+static void adxl34x_get_triple(struct adxl34x *ac, struct axis_triple *axis)
+{
+	short buf[3];
+
+	ac->bops->read_block(ac->dev, DATAX0, DATAZ1 - DATAX0 + 1, buf);
+
+	mutex_lock(&ac->mutex);
+	ac->saved.x = (s16) le16_to_cpu(buf[0]);
+	axis->x = ac->saved.x;
+
+	ac->saved.y = (s16) le16_to_cpu(buf[1]);
+	axis->y = ac->saved.y;
+
+	ac->saved.z = (s16) le16_to_cpu(buf[2]);
+	axis->z = ac->saved.z;
+	mutex_unlock(&ac->mutex);
+}
+
+static void adxl34x_service_ev_fifo(struct adxl34x *ac)
+{
+	struct adxl34x_platform_data *pdata = &ac->pdata;
+	struct axis_triple axis;
+
+	adxl34x_get_triple(ac, &axis);
+
+	input_event(ac->input, pdata->ev_type, pdata->ev_code_x,
+		    axis.x - ac->swcal.x);
+	input_event(ac->input, pdata->ev_type, pdata->ev_code_y,
+		    axis.y - ac->swcal.y);
+	input_event(ac->input, pdata->ev_type, pdata->ev_code_z,
+		    axis.z - ac->swcal.z);
+}
+
+static void adxl34x_report_key_single(struct input_dev *input, int key)
+{
+	input_report_key(input, key, true);
+	input_sync(input);
+	input_report_key(input, key, false);
+}
+
+static void adxl34x_send_key_events(struct adxl34x *ac,
+		struct adxl34x_platform_data *pdata, int status, int press)
+{
+	int i;
+
+	for (i = ADXL_X_AXIS; i <= ADXL_Z_AXIS; i++) {
+		if (status & (1 << (ADXL_Z_AXIS - i)))
+			input_report_key(ac->input,
+					 pdata->ev_code_tap[i], press);
+	}
+}
+
+static void adxl34x_do_tap(struct adxl34x *ac,
+		struct adxl34x_platform_data *pdata, int status)
+{
+	adxl34x_send_key_events(ac, pdata, status, true);
+	input_sync(ac->input);
+	adxl34x_send_key_events(ac, pdata, status, false);
+}
+
+static irqreturn_t adxl34x_irq(int irq, void *handle)
+{
+	struct adxl34x *ac = handle;
+	struct adxl34x_platform_data *pdata = &ac->pdata;
+	int int_stat, tap_stat, samples, orient, orient_code;
+
+	/*
+	 * ACT_TAP_STATUS should be read before clearing the interrupt
+	 * Avoid reading ACT_TAP_STATUS in case TAP detection is disabled
+	 */
+
+	if (pdata->tap_axis_control & (TAP_X_EN | TAP_Y_EN | TAP_Z_EN))
+		tap_stat = AC_READ(ac, ACT_TAP_STATUS);
+	else
+		tap_stat = 0;
+
+	int_stat = AC_READ(ac, INT_SOURCE);
+
+	if (int_stat & FREE_FALL)
+		adxl34x_report_key_single(ac->input, pdata->ev_code_ff);
+
+	if (int_stat & OVERRUN)
+		dev_dbg(ac->dev, "OVERRUN\n");
+
+	if (int_stat & (SINGLE_TAP | DOUBLE_TAP)) {
+		adxl34x_do_tap(ac, pdata, tap_stat);
+
+		if (int_stat & DOUBLE_TAP)
+			adxl34x_do_tap(ac, pdata, tap_stat);
+	}
+
+	if (pdata->ev_code_act_inactivity) {
+		if (int_stat & ACTIVITY)
+			input_report_key(ac->input,
+					 pdata->ev_code_act_inactivity, 1);
+		if (int_stat & INACTIVITY)
+			input_report_key(ac->input,
+					 pdata->ev_code_act_inactivity, 0);
+	}
+
+	/*
+	 * ORIENTATION SENSING ADXL346 only
+	 */
+	if (pdata->orientation_enable) {
+		orient = AC_READ(ac, ORIENT);
+		if ((pdata->orientation_enable & ADXL_EN_ORIENTATION_2D) &&
+		    (orient & ADXL346_2D_VALID)) {
+
+			orient_code = ADXL346_2D_ORIENT(orient);
+			/* Report orientation only when it changes */
+			if (ac->orient2d_saved != orient_code) {
+				ac->orient2d_saved = orient_code;
+				adxl34x_report_key_single(ac->input,
+					pdata->ev_codes_orient_2d[orient_code]);
+			}
+		}
+
+		if ((pdata->orientation_enable & ADXL_EN_ORIENTATION_3D) &&
+		    (orient & ADXL346_3D_VALID)) {
+
+			orient_code = ADXL346_3D_ORIENT(orient) - 1;
+			/* Report orientation only when it changes */
+			if (ac->orient3d_saved != orient_code) {
+				ac->orient3d_saved = orient_code;
+				adxl34x_report_key_single(ac->input,
+					pdata->ev_codes_orient_3d[orient_code]);
+			}
+		}
+	}
+
+	if (int_stat & (DATA_READY | WATERMARK)) {
+
+		if (pdata->fifo_mode)
+			samples = ENTRIES(AC_READ(ac, FIFO_STATUS)) + 1;
+		else
+			samples = 1;
+
+		for (; samples > 0; samples--) {
+			adxl34x_service_ev_fifo(ac);
+			/*
+			 * To ensure that the FIFO has
+			 * completely popped, there must be at least 5 us between
+			 * the end of reading the data registers, signified by the
+			 * transition to register 0x38 from 0x37 or the CS pin
+			 * going high, and the start of new reads of the FIFO or
+			 * reading the FIFO_STATUS register. For SPI operation at
+			 * 1.5 MHz or lower, the register addressing portion of the
+			 * transmission is sufficient delay to ensure the FIFO has
+			 * completely popped. It is necessary for SPI operation
+			 * greater than 1.5 MHz to de-assert the CS pin to ensure a
+			 * total of 5 us, which is at most 3.4 us at 5 MHz
+			 * operation.
+			 */
+			if (ac->fifo_delay && (samples > 1))
+				udelay(3);
+		}
+	}
+
+	input_sync(ac->input);
+
+	return IRQ_HANDLED;
+}
+
+static void __adxl34x_disable(struct adxl34x *ac)
+{
+	/*
+	 * A '0' places the ADXL34x into standby mode
+	 * with minimum power consumption.
+	 */
+	AC_WRITE(ac, POWER_CTL, 0);
+}
+
+static void __adxl34x_enable(struct adxl34x *ac)
+{
+	AC_WRITE(ac, POWER_CTL, ac->pdata.power_mode | PCTL_MEASURE);
+}
+
+void adxl34x_suspend(struct adxl34x *ac)
+{
+	mutex_lock(&ac->mutex);
+
+	if (!ac->suspended && !ac->disabled && ac->opened)
+		__adxl34x_disable(ac);
+
+	ac->suspended = true;
+
+	mutex_unlock(&ac->mutex);
+}
+EXPORT_SYMBOL_GPL(adxl34x_suspend);
+
+void adxl34x_resume(struct adxl34x *ac)
+{
+	mutex_lock(&ac->mutex);
+
+	if (ac->suspended && !ac->disabled && ac->opened)
+		__adxl34x_enable(ac);
+
+	ac->suspended = false;
+
+	mutex_unlock(&ac->mutex);
+}
+EXPORT_SYMBOL_GPL(adxl34x_resume);
+
+static ssize_t adxl34x_disable_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ac->disabled);
+}
+
+static ssize_t adxl34x_disable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	unsigned long val;
+	int error;
+
+	error = strict_strtoul(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ac->mutex);
+
+	if (!ac->suspended && ac->opened) {
+		if (val) {
+			if (!ac->disabled)
+				__adxl34x_disable(ac);
+		} else {
+			if (ac->disabled)
+				__adxl34x_enable(ac);
+		}
+	}
+
+	ac->disabled = !!val;
+
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(disable, 0664, adxl34x_disable_show, adxl34x_disable_store);
+
+static ssize_t adxl34x_calibrate_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	ssize_t count;
+
+	mutex_lock(&ac->mutex);
+	count = sprintf(buf, "%d,%d,%d\n",
+			ac->hwcal.x * 4 + ac->swcal.x,
+			ac->hwcal.y * 4 + ac->swcal.y,
+			ac->hwcal.z * 4 + ac->swcal.z);
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static ssize_t adxl34x_calibrate_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+
+	/*
+	 * Hardware offset calibration has a resolution of 15.6 mg/LSB.
+	 * We use HW calibration and handle the remaining bits in SW. (4mg/LSB)
+	 */
+
+	mutex_lock(&ac->mutex);
+	ac->hwcal.x -= (ac->saved.x / 4);
+	ac->swcal.x = ac->saved.x % 4;
+
+	ac->hwcal.y -= (ac->saved.y / 4);
+	ac->swcal.y = ac->saved.y % 4;
+
+	ac->hwcal.z -= (ac->saved.z / 4);
+	ac->swcal.z = ac->saved.z % 4;
+
+	AC_WRITE(ac, OFSX, (s8) ac->hwcal.x);
+	AC_WRITE(ac, OFSY, (s8) ac->hwcal.y);
+	AC_WRITE(ac, OFSZ, (s8) ac->hwcal.z);
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(calibrate, 0664,
+		   adxl34x_calibrate_show, adxl34x_calibrate_store);
+
+static ssize_t adxl34x_rate_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", RATE(ac->pdata.data_rate));
+}
+
+static ssize_t adxl34x_rate_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	unsigned long val;
+	int error;
+
+	error = strict_strtoul(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ac->mutex);
+
+	ac->pdata.data_rate = RATE(val);
+	AC_WRITE(ac, BW_RATE,
+		 ac->pdata.data_rate |
+			(ac->pdata.low_power_mode ? LOW_POWER : 0));
+
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(rate, 0664, adxl34x_rate_show, adxl34x_rate_store);
+
+static ssize_t adxl34x_autosleep_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n",
+		ac->pdata.power_mode & (PCTL_AUTO_SLEEP | PCTL_LINK) ? 1 : 0);
+}
+
+static ssize_t adxl34x_autosleep_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	unsigned long val;
+	int error;
+
+	error = strict_strtoul(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ac->mutex);
+
+	if (val)
+		ac->pdata.power_mode |= (PCTL_AUTO_SLEEP | PCTL_LINK);
+	else
+		ac->pdata.power_mode &= ~(PCTL_AUTO_SLEEP | PCTL_LINK);
+
+	if (!ac->disabled && !ac->suspended && ac->opened)
+		AC_WRITE(ac, POWER_CTL, ac->pdata.power_mode | PCTL_MEASURE);
+
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(autosleep, 0664,
+		   adxl34x_autosleep_show, adxl34x_autosleep_store);
+
+static ssize_t adxl34x_position_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	ssize_t count;
+
+	mutex_lock(&ac->mutex);
+	count = sprintf(buf, "(%d, %d, %d)\n",
+			ac->saved.x, ac->saved.y, ac->saved.z);
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(position, S_IRUGO, adxl34x_position_show, NULL);
+
+#ifdef ADXL_DEBUG
+static ssize_t adxl34x_write_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	struct adxl34x *ac = dev_get_drvdata(dev);
+	unsigned long val;
+	int error;
+
+	/*
+	 * This allows basic ADXL register write access for debug purposes.
+	 */
+	error = strict_strtoul(buf, 16, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ac->mutex);
+	AC_WRITE(ac, val >> 8, val & 0xFF);
+	mutex_unlock(&ac->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(write, 0664, NULL, adxl34x_write_store);
+#endif
+
+static struct attribute *adxl34x_attributes[] = {
+	&dev_attr_disable.attr,
+	&dev_attr_calibrate.attr,
+	&dev_attr_rate.attr,
+	&dev_attr_autosleep.attr,
+	&dev_attr_position.attr,
+#ifdef ADXL_DEBUG
+	&dev_attr_write.attr,
+#endif
+	NULL
+};
+
+static const struct attribute_group adxl34x_attr_group = {
+	.attrs = adxl34x_attributes,
+};
+
+static int adxl34x_input_open(struct input_dev *input)
+{
+	struct adxl34x *ac = input_get_drvdata(input);
+
+	mutex_lock(&ac->mutex);
+
+	if (!ac->suspended && !ac->disabled)
+		__adxl34x_enable(ac);
+
+	ac->opened = true;
+
+	mutex_unlock(&ac->mutex);
+
+	return 0;
+}
+
+static void adxl34x_input_close(struct input_dev *input)
+{
+	struct adxl34x *ac = input_get_drvdata(input);
+
+	mutex_lock(&ac->mutex);
+
+	if (!ac->suspended && !ac->disabled)
+		__adxl34x_disable(ac);
+
+	ac->opened = false;
+
+	mutex_unlock(&ac->mutex);
+}
+
+struct adxl34x *adxl34x_probe(struct device *dev, int irq,
+			      bool fifo_delay_default,
+			      const struct adxl34x_bus_ops *bops)
+{
+	struct adxl34x *ac;
+	struct input_dev *input_dev;
+	const struct adxl34x_platform_data *pdata;
+	int err, range, i;
+	unsigned char revid;
+
+	if (!irq) {
+		dev_err(dev, "no IRQ?\n");
+		err = -ENODEV;
+		goto err_out;
+	}
+
+	ac = kzalloc(sizeof(*ac), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ac || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ac->fifo_delay = fifo_delay_default;
+
+	pdata = dev->platform_data;
+	if (!pdata) {
+		dev_dbg(dev,
+			"No platfrom data: Using default initialization\n");
+		pdata = &adxl34x_default_init;
+	}
+
+	ac->pdata = *pdata;
+	pdata = &ac->pdata;
+
+	ac->input = input_dev;
+	ac->disabled = true;
+	ac->dev = dev;
+	ac->irq = irq;
+	ac->bops = bops;
+
+	mutex_init(&ac->mutex);
+
+	input_dev->name = "ADXL34x accelerometer";
+	revid = ac->bops->read(dev, DEVID);
+
+	switch (revid) {
+	case ID_ADXL345:
+		ac->model = 345;
+		break;
+	case ID_ADXL346:
+		ac->model = 346;
+		break;
+	default:
+		dev_err(dev, "Failed to probe %s\n", input_dev->name);
+		err = -ENODEV;
+		goto err_free_mem;
+	}
+
+	snprintf(ac->phys, sizeof(ac->phys), "%s/input0", dev_name(dev));
+
+	input_dev->phys = ac->phys;
+	input_dev->dev.parent = dev;
+	input_dev->id.product = ac->model;
+	input_dev->id.bustype = bops->bustype;
+	input_dev->open = adxl34x_input_open;
+	input_dev->close = adxl34x_input_close;
+
+	input_set_drvdata(input_dev, ac);
+
+	__set_bit(ac->pdata.ev_type, input_dev->evbit);
+
+	if (ac->pdata.ev_type == EV_REL) {
+		__set_bit(REL_X, input_dev->relbit);
+		__set_bit(REL_Y, input_dev->relbit);
+		__set_bit(REL_Z, input_dev->relbit);
+	} else {
+		/* EV_ABS */
+		__set_bit(ABS_X, input_dev->absbit);
+		__set_bit(ABS_Y, input_dev->absbit);
+		__set_bit(ABS_Z, input_dev->absbit);
+
+		if (pdata->data_range & FULL_RES)
+			range = ADXL_FULLRES_MAX_VAL;	/* Signed 13-bit */
+		else
+			range = ADXL_FIXEDRES_MAX_VAL;	/* Signed 10-bit */
+
+		input_set_abs_params(input_dev, ABS_X, -range, range, 3, 3);
+		input_set_abs_params(input_dev, ABS_Y, -range, range, 3, 3);
+		input_set_abs_params(input_dev, ABS_Z, -range, range, 3, 3);
+	}
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(pdata->ev_code_tap[ADXL_X_AXIS], input_dev->keybit);
+	__set_bit(pdata->ev_code_tap[ADXL_Y_AXIS], input_dev->keybit);
+	__set_bit(pdata->ev_code_tap[ADXL_Z_AXIS], input_dev->keybit);
+
+	if (pdata->ev_code_ff) {
+		ac->int_mask = FREE_FALL;
+		__set_bit(pdata->ev_code_ff, input_dev->keybit);
+	}
+
+	if (pdata->ev_code_act_inactivity)
+		__set_bit(pdata->ev_code_act_inactivity, input_dev->keybit);
+
+	ac->int_mask |= ACTIVITY | INACTIVITY;
+
+	if (pdata->watermark) {
+		ac->int_mask |= WATERMARK;
+		if (!FIFO_MODE(pdata->fifo_mode))
+			ac->pdata.fifo_mode |= FIFO_STREAM;
+	} else {
+		ac->int_mask |= DATA_READY;
+	}
+
+	if (pdata->tap_axis_control & (TAP_X_EN | TAP_Y_EN | TAP_Z_EN))
+		ac->int_mask |= SINGLE_TAP | DOUBLE_TAP;
+
+	if (FIFO_MODE(pdata->fifo_mode) == FIFO_BYPASS)
+		ac->fifo_delay = false;
+
+	ac->bops->write(dev, POWER_CTL, 0);
+
+	err = request_threaded_irq(ac->irq, NULL, adxl34x_irq,
+				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   dev_name(dev), ac);
+	if (err) {
+		dev_err(dev, "irq %d busy?\n", ac->irq);
+		goto err_free_mem;
+	}
+
+	err = sysfs_create_group(&dev->kobj, &adxl34x_attr_group);
+	if (err)
+		goto err_free_irq;
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_remove_attr;
+
+	AC_WRITE(ac, THRESH_TAP, pdata->tap_threshold);
+	AC_WRITE(ac, OFSX, pdata->x_axis_offset);
+	ac->hwcal.x = pdata->x_axis_offset;
+	AC_WRITE(ac, OFSY, pdata->y_axis_offset);
+	ac->hwcal.y = pdata->y_axis_offset;
+	AC_WRITE(ac, OFSZ, pdata->z_axis_offset);
+	ac->hwcal.z = pdata->z_axis_offset;
+	AC_WRITE(ac, THRESH_TAP, pdata->tap_threshold);
+	AC_WRITE(ac, DUR, pdata->tap_duration);
+	AC_WRITE(ac, LATENT, pdata->tap_latency);
+	AC_WRITE(ac, WINDOW, pdata->tap_window);
+	AC_WRITE(ac, THRESH_ACT, pdata->activity_threshold);
+	AC_WRITE(ac, THRESH_INACT, pdata->inactivity_threshold);
+	AC_WRITE(ac, TIME_INACT, pdata->inactivity_time);
+	AC_WRITE(ac, THRESH_FF, pdata->free_fall_threshold);
+	AC_WRITE(ac, TIME_FF, pdata->free_fall_time);
+	AC_WRITE(ac, TAP_AXES, pdata->tap_axis_control);
+	AC_WRITE(ac, ACT_INACT_CTL, pdata->act_axis_control);
+	AC_WRITE(ac, BW_RATE, RATE(ac->pdata.data_rate) |
+		 (pdata->low_power_mode ? LOW_POWER : 0));
+	AC_WRITE(ac, DATA_FORMAT, pdata->data_range);
+	AC_WRITE(ac, FIFO_CTL, FIFO_MODE(pdata->fifo_mode) |
+			SAMPLES(pdata->watermark));
+
+	if (pdata->use_int2) {
+		/* Map all INTs to INT2 */
+		AC_WRITE(ac, INT_MAP, ac->int_mask | OVERRUN);
+	} else {
+		/* Map all INTs to INT1 */
+		AC_WRITE(ac, INT_MAP, 0);
+	}
+
+	if (ac->model == 346 && ac->pdata.orientation_enable) {
+		AC_WRITE(ac, ORIENT_CONF,
+			ORIENT_DEADZONE(ac->pdata.deadzone_angle) |
+			ORIENT_DIVISOR(ac->pdata.divisor_length));
+
+		ac->orient2d_saved = 1234;
+		ac->orient3d_saved = 1234;
+
+		if (pdata->orientation_enable & ADXL_EN_ORIENTATION_3D)
+			for (i = 0; i < ARRAY_SIZE(pdata->ev_codes_orient_3d); i++)
+				__set_bit(pdata->ev_codes_orient_3d[i],
+					  input_dev->keybit);
+
+		if (pdata->orientation_enable & ADXL_EN_ORIENTATION_2D)
+			for (i = 0; i < ARRAY_SIZE(pdata->ev_codes_orient_2d); i++)
+				__set_bit(pdata->ev_codes_orient_2d[i],
+					  input_dev->keybit);
+	} else {
+		ac->pdata.orientation_enable = 0;
+	}
+
+	AC_WRITE(ac, INT_ENABLE, ac->int_mask | OVERRUN);
+
+	ac->pdata.power_mode &= (PCTL_AUTO_SLEEP | PCTL_LINK);
+
+	return ac;
+
+ err_remove_attr:
+	sysfs_remove_group(&dev->kobj, &adxl34x_attr_group);
+ err_free_irq:
+	free_irq(ac->irq, ac);
+ err_free_mem:
+	input_free_device(input_dev);
+	kfree(ac);
+ err_out:
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(adxl34x_probe);
+
+int adxl34x_remove(struct adxl34x *ac)
+{
+	sysfs_remove_group(&ac->dev->kobj, &adxl34x_attr_group);
+	free_irq(ac->irq, ac);
+	input_unregister_device(ac->input);
+	dev_dbg(ac->dev, "unregistered accelerometer\n");
+	kfree(ac);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(adxl34x_remove);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/adxl34x.h b/drivers/input/misc/adxl34x.h
new file mode 100644
index 00000000000..bbbc80fda16
--- /dev/null
+++ b/drivers/input/misc/adxl34x.h
@@ -0,0 +1,30 @@
+/*
+ * ADXL345/346 Three-Axis Digital Accelerometers (I2C/SPI Interface)
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ADXL34X_H_
+#define _ADXL34X_H_
+
+struct device;
+struct adxl34x;
+
+struct adxl34x_bus_ops {
+	u16 bustype;
+	int (*read)(struct device *, unsigned char);
+	int (*read_block)(struct device *, unsigned char, int, void *);
+	int (*write)(struct device *, unsigned char, unsigned char);
+};
+
+void adxl34x_suspend(struct adxl34x *ac);
+void adxl34x_resume(struct adxl34x *ac);
+struct adxl34x *adxl34x_probe(struct device *dev, int irq,
+			      bool fifo_delay_default,
+			      const struct adxl34x_bus_ops *bops);
+int adxl34x_remove(struct adxl34x *ac);
+
+#endif
diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c
index dfaa9a045ed..601f7372f9c 100644
--- a/drivers/input/misc/atlas_btns.c
+++ b/drivers/input/misc/atlas_btns.c
@@ -21,6 +21,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -60,12 +62,11 @@ static acpi_status acpi_atlas_button_handler(u32 function,
 		input_report_key(input_dev, atlas_keymap[code], key_down);
 		input_sync(input_dev);
 
-		status = 0;
+		status = AE_OK;
 	} else {
-		printk(KERN_WARNING "atlas: shrugged on unexpected function"
-			":function=%x,address=%lx,value=%x\n",
+		pr_warn("shrugged on unexpected function: function=%x,address=%lx,value=%x\n",
 			function, (unsigned long)address, (u32)*value);
-		status = -EINVAL;
+		status = AE_BAD_PARAMETER;
 	}
 
 	return status;
@@ -79,7 +80,7 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 
 	input_dev = input_allocate_device();
 	if (!input_dev) {
-		printk(KERN_ERR "atlas: unable to allocate input device\n");
+		pr_err("unable to allocate input device\n");
 		return -ENOMEM;
 	}
 
@@ -102,7 +103,7 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 
 	err = input_register_device(input_dev);
 	if (err) {
-		printk(KERN_ERR "atlas: couldn't register input device\n");
+		pr_err("couldn't register input device\n");
 		input_free_device(input_dev);
 		return err;
 	}
@@ -112,12 +113,12 @@ static int atlas_acpi_button_add(struct acpi_device *device)
 				0x81, &acpi_atlas_button_handler,
 				&acpi_atlas_button_setup, device);
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR "Atlas: Error installing addr spc handler\n");
+		pr_err("error installing addr spc handler\n");
 		input_unregister_device(input_dev);
-		status = -EINVAL;
+		err = -EINVAL;
 	}
 
-	return status;
+	return err;
 }
 
 static int atlas_acpi_button_remove(struct acpi_device *device, int type)
@@ -126,14 +127,12 @@ static int atlas_acpi_button_remove(struct acpi_device *device, int type)
 
 	status = acpi_remove_address_space_handler(device->handle,
 				0x81, &acpi_atlas_button_handler);
-	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR "Atlas: Error removing addr spc handler\n");
-		status = -EINVAL;
-	}
+	if (ACPI_FAILURE(status))
+		pr_err("error removing addr spc handler\n");
 
 	input_unregister_device(input_dev);
 
-	return status;
+	return 0;
 }
 
 static const struct acpi_device_id atlas_device_ids[] = {
@@ -145,6 +144,7 @@ MODULE_DEVICE_TABLE(acpi, atlas_device_ids);
 static struct acpi_driver atlas_acpi_driver = {
 	.name	= ACPI_ATLAS_NAME,
 	.class	= ACPI_ATLAS_CLASS,
+	.owner	= THIS_MODULE,
 	.ids	= atlas_device_ids,
 	.ops	= {
 		.add	= atlas_acpi_button_add,
@@ -154,18 +154,10 @@ static struct acpi_driver atlas_acpi_driver = {
 
 static int __init atlas_acpi_init(void)
 {
-	int result;
-
 	if (acpi_disabled)
 		return -ENODEV;
 
-	result = acpi_bus_register_driver(&atlas_acpi_driver);
-	if (result < 0) {
-		printk(KERN_ERR "Atlas ACPI: Unable to register driver\n");
-		return -ENODEV;
-	}
-
-	return 0;
+	return acpi_bus_register_driver(&atlas_acpi_driver);
 }
 
 static void __exit atlas_acpi_exit(void)
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
new file mode 100644
index 00000000000..57c294f0719
--- /dev/null
+++ b/drivers/input/misc/pwm-beeper.c
@@ -0,0 +1,199 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  PWM beeper driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+struct pwm_beeper {
+	struct input_dev *input;
+	struct pwm_device *pwm;
+	unsigned long period;
+};
+
+#define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
+
+static int pwm_beeper_event(struct input_dev *input,
+			    unsigned int type, unsigned int code, int value)
+{
+	int ret = 0;
+	struct pwm_beeper *beeper = input_get_drvdata(input);
+	unsigned long period;
+
+	if (type != EV_SND || value < 0)
+		return -EINVAL;
+
+	switch (code) {
+	case SND_BELL:
+		value = value ? 1000 : 0;
+		break;
+	case SND_TONE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (value == 0) {
+		pwm_config(beeper->pwm, 0, 0);
+		pwm_disable(beeper->pwm);
+	} else {
+		period = HZ_TO_NANOSECONDS(value);
+		ret = pwm_config(beeper->pwm, period / 2, period);
+		if (ret)
+			return ret;
+		ret = pwm_enable(beeper->pwm);
+		if (ret)
+			return ret;
+		beeper->period = period;
+	}
+
+	return 0;
+}
+
+static int __devinit pwm_beeper_probe(struct platform_device *pdev)
+{
+	unsigned long pwm_id = (unsigned long)pdev->dev.platform_data;
+	struct pwm_beeper *beeper;
+	int error;
+
+	beeper = kzalloc(sizeof(*beeper), GFP_KERNEL);
+	if (!beeper)
+		return -ENOMEM;
+
+	beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+
+	if (IS_ERR(beeper->pwm)) {
+		error = PTR_ERR(beeper->pwm);
+		dev_err(&pdev->dev, "Failed to request pwm device: %d\n", error);
+		goto err_free;
+	}
+
+	beeper->input = input_allocate_device();
+	if (!beeper->input) {
+		dev_err(&pdev->dev, "Failed to allocate input device\n");
+		error = -ENOMEM;
+		goto err_pwm_free;
+	}
+	beeper->input->dev.parent = &pdev->dev;
+
+	beeper->input->name = "pwm-beeper";
+	beeper->input->phys = "pwm/input0";
+	beeper->input->id.bustype = BUS_HOST;
+	beeper->input->id.vendor = 0x001f;
+	beeper->input->id.product = 0x0001;
+	beeper->input->id.version = 0x0100;
+
+	beeper->input->evbit[0] = BIT(EV_SND);
+	beeper->input->sndbit[0] = BIT(SND_TONE) | BIT(SND_BELL);
+
+	beeper->input->event = pwm_beeper_event;
+
+	input_set_drvdata(beeper->input, beeper);
+
+	error = input_register_device(beeper->input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to register input device: %d\n", error);
+		goto err_input_free;
+	}
+
+	platform_set_drvdata(pdev, beeper);
+
+	return 0;
+
+err_input_free:
+	input_free_device(beeper->input);
+err_pwm_free:
+	pwm_free(beeper->pwm);
+err_free:
+	kfree(beeper);
+
+	return error;
+}
+
+static int __devexit pwm_beeper_remove(struct platform_device *pdev)
+{
+	struct pwm_beeper *beeper = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	input_unregister_device(beeper->input);
+
+	pwm_disable(beeper->pwm);
+	pwm_free(beeper->pwm);
+
+	kfree(beeper);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pwm_beeper_suspend(struct device *dev)
+{
+	struct pwm_beeper *beeper = dev_get_drvdata(dev);
+
+	if (beeper->period)
+		pwm_disable(beeper->pwm);
+
+	return 0;
+}
+
+static int pwm_beeper_resume(struct device *dev)
+{
+	struct pwm_beeper *beeper = dev_get_drvdata(dev);
+
+	if (beeper->period) {
+		pwm_config(beeper->pwm, beeper->period / 2, beeper->period);
+		pwm_enable(beeper->pwm);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops,
+			 pwm_beeper_suspend, pwm_beeper_resume);
+
+#define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops)
+#else
+#define PWM_BEEPER_PM_OPS NULL
+#endif
+
+static struct platform_driver pwm_beeper_driver = {
+	.probe	= pwm_beeper_probe,
+	.remove = __devexit_p(pwm_beeper_remove),
+	.driver = {
+		.name	= "pwm-beeper",
+		.owner	= THIS_MODULE,
+		.pm	= PWM_BEEPER_PM_OPS,
+	},
+};
+
+static int __init pwm_beeper_init(void)
+{
+	return platform_driver_register(&pwm_beeper_driver);
+}
+module_init(pwm_beeper_init);
+
+static void __exit pwm_beeper_exit(void)
+{
+	platform_driver_unregister(&pwm_beeper_driver);
+}
+module_exit(pwm_beeper_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("PWM beeper driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pwm-beeper");
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index e9069b87fde..f16972bddca 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -52,7 +52,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
 	return IRQ_HANDLED;
 }
 
-static int __devinit twl4030_pwrbutton_probe(struct platform_device *pdev)
+static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
 {
 	struct input_dev *pwr;
 	int irq = platform_get_irq(pdev, 0);
@@ -95,7 +95,7 @@ free_input_dev:
 	return err;
 }
 
-static int __devexit twl4030_pwrbutton_remove(struct platform_device *pdev)
+static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
 {
 	struct input_dev *pwr = platform_get_drvdata(pdev);
 	int irq = platform_get_irq(pdev, 0);
@@ -106,9 +106,8 @@ static int __devexit twl4030_pwrbutton_remove(struct platform_device *pdev)
 	return 0;
 }
 
-struct platform_driver twl4030_pwrbutton_driver = {
-	.probe		= twl4030_pwrbutton_probe,
-	.remove		= __devexit_p(twl4030_pwrbutton_remove),
+static struct platform_driver twl4030_pwrbutton_driver = {
+	.remove		= __exit_p(twl4030_pwrbutton_remove),
 	.driver		= {
 		.name	= "twl4030_pwrbutton",
 		.owner	= THIS_MODULE,
@@ -117,7 +116,8 @@ struct platform_driver twl4030_pwrbutton_driver = {
 
 static int __init twl4030_pwrbutton_init(void)
 {
-	return platform_driver_register(&twl4030_pwrbutton_driver);
+	return platform_driver_probe(&twl4030_pwrbutton_driver,
+			twl4030_pwrbutton_probe);
 }
 module_init(twl4030_pwrbutton_init);
 
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 4dac8b79fcd..12501de0c5c 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -1347,7 +1347,7 @@ static int __init wb_module_init(void)
 
 	err = map_bios();
 	if (err)
-		return err;
+		goto err_free_keymap;
 
 	err = platform_driver_register(&wistron_driver);
 	if (err)
@@ -1371,6 +1371,8 @@ static int __init wb_module_init(void)
 	platform_driver_unregister(&wistron_driver);
  err_unmap_bios:
 	unmap_bios();
+ err_free_keymap:
+	kfree(keymap);
 
 	return err;
 }