aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/cpu/arm926ejs
AgeCommit message (Expand)Author
2012-08-14mxs: reorganize source directory for easy sharing of code in i.MXS SoCsOtavio Salvador
2012-08-14MX28: use a clear name for DDR2 initializationOtavio Salvador
2012-08-14MX28: extend print_cpuinfo() to use chip informationOtavio Salvador
2012-08-14Enable the EMAC clock in at91_macb_hw_init().Markus Hubig
2012-08-14arm : Atmel : add at91sam9x5ek board supportBo Shen
2012-08-05DaVinci DA8xx: fix set_cpu_clk_info()Laurence Withers
2012-08-05DaVinci DA8xx: replace magic number for DDR speedLaurence Withers
2012-08-05arm/davinci/da850: add uart0 pinmuxMikhail Kshevetskiy
2012-08-05arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138Mikhail Kshevetskiy
2012-08-05da850/omap-l138: Add support to read u-boot image from MMC/SDLad, Prabhakar
2012-08-05arm, davinci: perform check for initializing global data and serial initLad, Prabhakar
2012-08-05da850/omap-l138: Add MMC support for DA850/OMAP-L138Lad, Prabhakar
2012-07-07ARM: mx28: Remove CONFIG_ARCH_CPU_INITFabio Estevam
2012-07-07SPL: ARM: spear: Add SPL support for SPEAr600 platformStefan Roese
2012-07-07SPEAr: explicitly select clk src for UARTShiraz Hashim
2012-07-07SPEAr: Add basic arch related support for SPEAr SoCsVipin KUMAR
2012-07-07kirkwood: add save functionality kirkwood_mpp_conf functionValentin Longchamp
2012-07-07i.MX28: Add function to adjust memory parametersMarek Vasut
2012-07-07DaVinci: fix ddr2 vtp i/o calibrationTroy Kisky
2012-05-15i.MX28: Avoid redefining serial_put[cs]()Marek Vasut
2012-05-15i.MX28: Add battery boot components to SPLMarek Vasut
2012-05-15i.MX28: Reorder battery status functions in SPLMarek Vasut
2012-05-15i.MX28: Add LRADC init to i.MX28 SPLMarek Vasut
2012-05-15i.MX28: Shut down the LCD controller before resetMarek Vasut
2012-05-15i.MX28: Implement boot pads sampling and reportingMarek Vasut
2012-05-15i.MX28: Improve passing of data from SPL to U-BootMarek Vasut
2012-05-15i.MX28: Add delay after CPU bypass is clearedMarek Vasut
2012-05-15imx: Add u-boot.imx as target for ARM9 i.MX SOCsTimo Ketola
2012-05-15i.MX25: esdhc: Add mxc_get_clock infrastructureTimo Ketola
2012-05-15Revert "i.MX28: Enable additional DRAM address bits"Marek Vasut
2012-05-15arm926ejs: add NXP LPC32x0 cpu series supportVladimir Zapolskiy
2012-04-16ARM926EJS: Fix cache.c to comply with checkpatch.plMarek Vasut
2012-04-16ARM926EJS: Make asm routines volatile in cache opsMarek Vasut
2012-04-16DMA: Split the APBH DMA init into block and channel initMarek Vasut
2012-04-16ARM: 926ejs: use debug() for misaligned addressesStefano Babic
2012-03-30arm: Use common .lds file where possibleSimon Glass
2012-03-29i.MX28: Enable caches by defaultMarek Vasut
2012-03-29ARM926EJS: Implement cache operationsMarek Vasut
2012-03-28nhk8815: fix build errorsAnatolij Gustschin
2012-03-27i.MX28: Drop __naked function from spl_mem_initMarek Vasut
2012-03-27i.MX28: Make the stabilization delays shorterMarek Vasut
2012-03-27i.MX28: Enable additional DRAM address bitsMarek Vasut
2012-03-26Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registersRobert Delien
2012-03-26Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8Robert Delien
2012-03-26i.MX28: Reformat the DRAM memory configuration dataMarek Vasut
2012-03-26i.mx28: Replaced magic numbers for scratch register addresses with register d...Robert Delien
2012-03-13ATMEL: remove old atmel_mci driverSven Schnelle
2012-03-06Stop using builtin_run_command()Simon Glass
2012-03-06Rename run_command() to builtin_run_command()Simon Glass
2012-02-27dm6467Tevm: Use a common configuration file for davinci_dm6467evm and davinci...prabhakar.csengg@gmail.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-11 07:25:27 +0000