diff options
Diffstat (limited to 'arch/arm/cpu/ixp/npe/include/IxEthAcc.h')
| -rw-r--r-- | arch/arm/cpu/ixp/npe/include/IxEthAcc.h | 2512 |
1 files changed, 2512 insertions, 0 deletions
diff --git a/arch/arm/cpu/ixp/npe/include/IxEthAcc.h b/arch/arm/cpu/ixp/npe/include/IxEthAcc.h new file mode 100644 index 000000000..ff706c451 --- /dev/null +++ b/arch/arm/cpu/ixp/npe/include/IxEthAcc.h @@ -0,0 +1,2512 @@ +/** @file IxEthAcc.h + * + * @brief this file contains the public API of @ref IxEthAcc component + * + * Design notes: + * The IX_OSAL_MBUF address is to be specified on bits [31-5] and must + * be cache aligned (bits[4-0] cleared) + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * + */ + +#ifndef IxEthAcc_H +#define IxEthAcc_H + +#include <IxOsBuffMgt.h> +#include <IxTypes.h> + +/** + * @defgroup IxEthAcc IXP400 Ethernet Access (IxEthAcc) API + * + * @brief ethAcc is a library that does provides access to the internal IXP400 10/100Bt Ethernet MACs. + * + *@{ + */ + +/** + * @ingroup IxEthAcc + * @brief Definition of the Ethernet Access status + */ +typedef enum /* IxEthAccStatus */ +{ + IX_ETH_ACC_SUCCESS = IX_SUCCESS, /**< return success*/ + IX_ETH_ACC_FAIL = IX_FAIL, /**< return fail*/ + IX_ETH_ACC_INVALID_PORT, /**< return invalid port*/ + IX_ETH_ACC_PORT_UNINITIALIZED, /**< return uninitialized*/ + IX_ETH_ACC_MAC_UNINITIALIZED, /**< return MAC uninitialized*/ + IX_ETH_ACC_INVALID_ARG, /**< return invalid arg*/ + IX_ETH_TX_Q_FULL, /**< return tx queue is full*/ + IX_ETH_ACC_NO_SUCH_ADDR /**< return no such address*/ +} IxEthAccStatus; + +/** + * @ingroup IxEthAcc + * @enum IxEthAccPortId + * @brief Definition of the IXP400 Mac Ethernet device. + */ +typedef enum +{ + IX_ETH_PORT_1 = 0, /**< Ethernet Port 1 */ + IX_ETH_PORT_2 = 1 /**< Ethernet port 2 */ + ,IX_ETH_PORT_3 = 2 /**< Ethernet port 3 */ +} IxEthAccPortId; + +/** + * @ingroup IxEthAcc + * + * @def IX_ETH_ACC_NUMBER_OF_PORTS + * + * @brief Definition of the number of ports + * + */ +#ifdef __ixp46X +#define IX_ETH_ACC_NUMBER_OF_PORTS (3) +#else +#define IX_ETH_ACC_NUMBER_OF_PORTS (2) +#endif + +/** + * @ingroup IxEthAcc + * + * @def IX_IEEE803_MAC_ADDRESS_SIZE + * + * @brief Definition of the size of the MAC address + * + */ +#define IX_IEEE803_MAC_ADDRESS_SIZE (6) + + +/** + * + * @brief Definition of the IEEE 802.3 Ethernet MAC address structure. + * + * The data should be packed with bytes xx:xx:xx:xx:xx:xx + * @note + * The data must be packed in network byte order. + */ +typedef struct +{ + UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< MAC address */ +} IxEthAccMacAddr; + +/** + * @ingroup IxEthAcc + * @def IX_ETH_ACC_NUM_TX_PRIORITIES + * @brief Definition of the number of transmit priorities + * + */ +#define IX_ETH_ACC_NUM_TX_PRIORITIES (8) + +/** + * @ingroup IxEthAcc + * @enum IxEthAccTxPriority + * @brief Definition of the relative priority used to transmit a frame + * + */ +typedef enum +{ + IX_ETH_ACC_TX_PRIORITY_0 = 0, /**<Lowest Priority submission */ + IX_ETH_ACC_TX_PRIORITY_1 = 1, /**<submission prority of 1 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_2 = 2, /**<submission prority of 2 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_3 = 3, /**<submission prority of 3 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_4 = 4, /**<submission prority of 4 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_5 = 5, /**<submission prority of 5 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_6 = 6, /**<submission prority of 6 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_7 = 7, /**<Highest priority submission */ + + IX_ETH_ACC_TX_DEFAULT_PRIORITY = IX_ETH_ACC_TX_PRIORITY_0 /**< By default send all + packets with lowest priority */ +} IxEthAccTxPriority; + +/** + * @ingroup IxEthAcc + * @enum IxEthAccRxFrameType + * @brief Identify the type of a frame. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_LINKMASK + */ +typedef enum +{ + IX_ETHACC_RX_LLCTYPE = 0x00, /**< 802.3 - 8802, with LLC/SNAP */ + IX_ETHACC_RX_ETHTYPE = 0x10, /**< 802.3 (Ethernet) without LLC/SNAP */ + IX_ETHACC_RX_STATYPE = 0x20, /**< 802.11, AP <=> STA */ + IX_ETHACC_RX_APTYPE = 0x30 /**< 802.11, AP <=> AP */ +} IxEthAccRxFrameType; + +/** + * @ingroup IxEthAcc + * @enum IxEthAccDuplexMode + * @brief Definition to provision the duplex mode of the MAC. + * + */ +typedef enum +{ + IX_ETH_ACC_FULL_DUPLEX, /**< Full duplex operation of the MAC */ + IX_ETH_ACC_HALF_DUPLEX /**< Half duplex operation of the MAC */ +} IxEthAccDuplexMode; + + +/** + * @ingroup IxEthAcc + * @struct IxEthAccNe + * @brief Definition of service-specific informations. + * + * This structure defines the Ethernet service-specific informations + * and enable QoS and VLAN features. + */ +typedef struct +{ + UINT32 ixReserved_next; /**< reserved for chaining */ + UINT32 ixReserved_lengths; /**< reserved for buffer lengths */ + UINT32 ixReserved_data; /**< reserved for buffer pointer */ + UINT8 ixDestinationPortId; /**< Destination portId for this packet, if known by NPE */ + UINT8 ixSourcePortId; /**< Source portId for this packet */ + UINT16 ixFlags; /**< BitField of option for this frame */ + UINT8 ixQoS; /**< QoS class of the frame */ + UINT8 ixReserved; /**< reserved */ + UINT16 ixVlanTCI; /**< Vlan TCI */ + UINT8 ixDestMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Destination MAC address */ + UINT8 ixSourceMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Source MAC address */ +} IxEthAccNe; + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_PORT_UNKNOWN + * + * @brief Contents of the field @a IX_ETHACC_NE_DESTPORTID when no + * destination port can be found by the NPE for this frame. + * + */ +#define IX_ETHACC_NE_PORT_UNKNOWN (0xff) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_DESTMAC + * + * @brief The location of the destination MAC address in the Mbuf header. + * + */ +#define IX_ETHACC_NE_DESTMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestMac + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_SOURCEMAC + * + * @brief The location of the source MAC address in the Mbuf header. + * + */ +#define IX_ETHACC_NE_SOURCEMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourceMac + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_VLANTCI + * + * @brief The VLAN Tag Control Information associated with this frame + * + * The VLAN Tag Control Information associated with this frame. On Rx + * path, this field is extracted from the packet header. + * On Tx path, the value of this field is inserted in the frame when + * the port is configured to insert or replace vlan tags in the + * egress frames. + * + * @sa IX_ETHACC_NE_FLAGS + */ +#define IX_ETHACC_NE_VLANTCI(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixVlanTCI + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_SOURCEPORTID + * + * @brief The port where this frame came from. + * + * The port where this frame came from. This field is set on receive + * with the port information. This field is ignored on Transmit path. + */ +#define IX_ETHACC_NE_SOURCEPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourcePortId + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_DESTPORTID + * + * @brief The destination port where this frame should be sent. + * + * The destination port where this frame should be sent. + * + * @li In the transmit direction, this field contains the destination port + * and is ignored unless @a IX_ETHACC_NE_FLAG_DST is set. + * + * @li In the receive direction, this field contains the port where the + * destination MAC addresses has been learned. If the destination + * MAC address is unknown, then this value is set to the reserved value + * @a IX_ETHACC_NE_PORT_UNKNOWN + * + */ +#define IX_ETHACC_NE_DESTPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestinationPortId + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_QOS + * + * @brief QualityOfService class (QoS) for this received frame. + * + */ +#define IX_ETHACC_NE_QOS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixQoS + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_FLAGS + * + * @brief Bit Mask of the different flags associated with a frame + * + * The flags are the bit-oring combination + * of the following different fields : + * + * @li IP flag (Rx @a IX_ETHACC_NE_IPMASK) + * @li Spanning Tree flag (Rx @a IX_ETHACC_NE_STMASK) + * @li Link layer type (Rx and Tx @a IX_ETHACC_NE_LINKMASK) + * @li VLAN Tagged Frame (Rx @a IX_ETHACC_NE_VLANMASK) + * @li New source MAC address (Rx @a IX_ETHACC_NE_NEWSRCMASK) + * @li Multicast flag (Rx @a IX_ETHACC_NE_MCASTMASK) + * @li Broadcast flag (Rx @a IX_ETHACC_NE_BCASTMASK) + * @li Destination port flag (Tx @a IX_ETHACC_NE_PORTMASK) + * @li Tag/Untag Tx frame (Tx @a IX_ETHACC_NE_TAGMODEMASK) + * @li Overwrite destination port (Tx @a IX_ETHACC_NE_PORTOVERMASK) + * @li Filtered frame (Rx @a IX_ETHACC_NE_STMASK) + * @li VLAN Enabled (Rx and Tx @a IX_ETHACC_NE_VLANENABLEMASK) + */ +#define IX_ETHACC_NE_FLAGS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixFlags + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_BCASTMASK + * + * @brief This mask defines if a received frame is a broadcast frame. + * + * This mask defines if a received frame is a broadcast frame. + * The BCAST flag is set when the destination MAC address of + * a frame is broadcast. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_BCASTMASK (0x1) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_MCASTMASK + * + * @brief This mask defines if a received frame is a multicast frame. + * + * This mask defines if a received frame is a multicast frame. + * The MCAST flag is set when the destination MAC address of + * a frame is multicast. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_MCASTMASK (0x1 << 1) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_IPMASK + * + * @brief This mask defines if a received frame is a IP frame. + * + * This mask applies to @a IX_ETHACC_NE_FLAGS and defines if a received + * frame is a IP frame. The IP flag is set on Rx direction, depending on + * the frame contents. The flag is set when the length/type field of a + * received frame is 0x8000. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_IPMASK (0x1 << 2) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_VLANMASK + * + * @brief This mask defines if a received frame is VLAN tagged. + * + * This mask defines if a received frame is VLAN tagged. + * When set, the Rx frame is VLAN-tagged and the tag value + * is available thru @a IX_ETHACC_NE_VLANID. + * Note that when sending frames which are already tagged + * this flag should be set, to avoid inserting another VLAN tag. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_VLANID + * + */ +#define IX_ETHACC_NE_VLANMASK (0x1 << 3) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_LINKMASK + * + * @brief This mask is the link layer protocol indicator + * + * This mask applies to @a IX_ETHACC_NE_FLAGS. + * It reflects the state of a frame as it exits an NPE on the Rx path + * or enters an NPE on the Tx path. Its values are as follows: + * @li 0x00 - IEEE802.3 - 8802 (Rx) / IEEE802.3 - 8802 (Tx) + * @li 0x01 - IEEE802.3 - Ethernet (Rx) / IEEE802.3 - Ethernet (Tx) + * @li 0x02 - IEEE802.11 AP -> STA (Rx) / IEEE802.11 STA -> AP (Tx) + * @li 0x03 - IEEE802.11 AP -> AP (Rx) / IEEE802.11 AP->AP (Tx) + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_LINKMASK (0x3 << 4) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_STMASK + * + * @brief This mask defines if a received frame is a Spanning Tree frame. + * + * This mask applies to @a IX_ETHACC_NE_FLAGS. + * On rx direction, it defines if a received if frame is a Spanning Tree frame. + * Setting this fkag on transmit direction overrides the port settings + * regarding the VLAN options and + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_STMASK (0x1 << 6) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_FILTERMASK + * + * @brief This bit indicates whether a frame has been filtered by the Rx service. + * + * This mask applies to @a IX_ETHACC_NE_FLAGS. + * Certain frames, which should normally be fully filtered by the NPE to due + * the destination MAC address being on the same segment as the Rx port are + * still forwarded to the XScale (although the payload is invalid) in order + * to learn the MAC address of the transmitting station, if this is unknown. + * Normally EthAcc will filter and recycle these framess internally and no + * frames with the FILTER bit set will be received by the client. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_FILTERMASK (0x1 << 7) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_PORTMASK + * + * @brief This mask defines the rule to transmit a frame + * + * This mask defines the rule to transmit a frame. When set, a frame + * is transmitted to the destination port as set by the macro + * @a IX_ETHACC_NE_DESTPORTID. If not set, the destination port + * is searched using the destination MAC address. + * + * @note This flag is meaningful only for multiport Network Engines. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_DESTPORTID + * + */ +#define IX_ETHACC_NE_PORTOVERMASK (0x1 << 8) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_TAGMODEMASK + * + * @brief This mask defines the tagging rules to apply to a transmit frame. + * + * This mask defines the tagging rules to apply to a transmit frame + * regardless of the default setting for a port. When used together + * with @a IX_ETHACC_NE_TAGOVERMASK and when set, the + * frame will be tagged prior to transmission. When not set, + * the frame will be untagged prior to transmission. This is accomplished + * irrespective of the Egress tagging rules, constituting a per-frame override. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_TAGOVERMASK + * + */ +#define IX_ETHACC_NE_TAGMODEMASK (0x1 << 9) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_TAGOVERMASK + * + * @brief This mask defines the rule to transmit a frame + * + * This mask defines the rule to transmit a frame. When set, the + * default transmit rules of a port are overriden. + * When not set, the default rules as set by @ref IxEthDB should apply. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_TAGMODEMASK + * + */ +#define IX_ETHACC_NE_TAGOVERMASK (0x1 << 10) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_VLANENABLEMASK + * + * @brief This mask defines if a frame is a VLAN frame or not + * + * When set, frames undergo normal VLAN processing on the Tx path + * (membership filtering, tagging, tag removal etc). If this flag is + * not set, the frame is considered to be a regular non-VLAN frame + * and no VLAN processing will be performed. + * + * Note that VLAN-enabled NPE images will always set this flag in all + * Rx frames, and images which are not VLAN enabled will clear this + * flag for all received frames. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_VLANENABLEMASK (0x1 << 14) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_NEWSRCMASK + * + * @brief This mask defines if a received frame has been learned. + * + * This mask defines if the source MAC address of a frame is + * already known. If the bit is set, the source MAC address was + * unknown to the NPE at the time the frame was received. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_NEWSRCMASK (0x1 << 15) + +/** + * @ingroup IxEthAcc + * + * @brief This defines the recommanded minimum size of MBUF's submitted + * to the frame receive service. + * + */ +#define IX_ETHACC_RX_MBUF_MIN_SIZE (2048) + +/** + * @ingroup IxEthAcc + * + * @brief This defines the highest MII address of any attached PHYs + * + * The maximum number for PHY address is 31, add on for range checking. + * + */ +#define IXP425_ETH_ACC_MII_MAX_ADDR 32 + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccInit(void) + * + * @brief Initializes the IXP400 Ethernet Access Service. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * This should be called once per module initialization. + * @pre + * The NPE must first be downloaded with the required microcode which supports all + * required features. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Service has failed to initialize. + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccInit(void); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccUnload(void) + * + * @brief Unload the Ethernet Access Service. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @return void + * + * <hr> + */ +PUBLIC void ixEthAccUnload(void); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortInit( IxEthAccPortId portId) + * + * @brief Initializes an NPE/Ethernet MAC Port. + * + * The NPE/Ethernet port initialisation includes the following steps + * @li Initialize the NPE/Ethernet MAC hardware. + * @li Verify NPE downloaded and operational. + * @li The NPE shall be available for usage once this API returns. + * @li Verify that the Ethernet port is present before initializing + * + * @li Reentrant - no + * @li ISR Callable - no + * + * This should be called once per mac device. + * The NPE/MAC shall be in disabled state after init. + * + * @pre + * The component must be initialized via @a ixEthAccInit + * The NPE must first be downloaded with the required microcode which supports all + * required features. + * + * Dependant on Services: (Must be initialized before using this service may be initialized) + * ixNPEmh - NPE Message handling service. + * ixQmgr - Queue Manager component. + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS: if the ethernet port is not present, a warning is issued. + * @li @a IX_ETH_ACC_FAIL : The NPE processor has failed to initialize. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortInit(IxEthAccPortId portId); + + +/************************************************************************* + + ##### ## ##### ## ##### ## ##### # # + # # # # # # # # # # # # # # + # # # # # # # # # # # # ###### + # # ###### # ###### ##### ###### # # # + # # # # # # # # # # # # # + ##### # # # # # # # # # # # + +*************************************************************************/ + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameSubmit( + IxEthAccPortId portId, + IX_OSAL_MBUF *buffer, + IxEthAccTxPriority priority) + * + * @brief This function shall be used to submit MBUFs buffers for transmission on a particular MAC device. + * + * When the frame is transmitted, the buffer shall be returned thru the + * callback @a IxEthAccPortTxDoneCallback. + * + * In case of over-submitting, the order of the frames on the + * network may be modified. + * + * Buffers shall be not queued for transmission if the port is disabled. + * The port can be enabled using @a ixEthAccPortEnable + * + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * + * @pre + * @a ixEthAccPortTxDoneCallbackRegister must be called to register a function to allow this service to + * return the buffer to the calling service. + * + * @note + * If the buffer submit fails for any reason the user has retained ownership of the buffer. + * + * @param portId @ref IxEthAccPortId [in] - MAC port ID to transmit Ethernet frame on. + * @param buffer @ref IX_OSAL_MBUF [in] - pointer to an MBUF formatted buffer. Chained buffers are supported for transmission. + * Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is ignored. + * @param priority @ref IxEthAccTxPriority [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Failed to queue frame for transmission. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ + +PUBLIC IxEthAccStatus ixEthAccPortTxFrameSubmit( + IxEthAccPortId portId, + IX_OSAL_MBUF *buffer, + IxEthAccTxPriority priority); + +/** + * @ingroup IxEthAcc + * + * @brief Function prototype for Ethernet Tx Buffer Done callback. Registered + * via @a ixEthAccTxBufferDoneCallbackRegister + * + * This function is called once the previously submitted buffer is no longer required by this service. + * It may be returned upon successful transmission of the frame or during the shutdown of + * the port prior to the transmission of a queued frame. + * The calling of this registered function is not a guarantee of successful transmission of the buffer. + * + * + * @li Reentrant - yes , The user provided function should be reentrant. + * @li ISR Callable - yes , The user provided function must be callable from an ISR. + * + * + * <b>Calling Context </b>: + * @par + * This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun + * within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. + * The decision is system specific. + * + * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC + * via @a ixEthAccPortTxDoneCallbackRegister. It allows the same callback to be used for multiple MACs. + * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Tx mbuf descriptor. + * + * @return void + * + * @note + * The field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified by the access layer and reset to NULL. + * + * <hr> + */ +typedef void (*IxEthAccPortTxDoneCallback) ( UINT32 callbackTag, IX_OSAL_MBUF *buffer ); + + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxDoneCallbackRegister( IxEthAccPortId portId, + IxEthAccPortTxDoneCallback txCallbackFn, + UINT32 callbackTag) + * + * @brief Register a callback function to allow + * the transmitted buffers to return to the user. + * + * This function registers the transmit buffer done function callback for a particular port. + * + * The registered callback function is called once the previously submitted buffer is no longer required by this service. + * It may be returned upon successful transmission of the frame or shutdown of port prior to submission. + * The calling of this registered function is not a guarantee of successful transmission of the buffer. + * + * If called several times the latest callback shall be registered for a particular port. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * @pre + * The port must be initialized via @a ixEthAccPortInit + * + * + * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device. + * @param txCallbackFn @ref IxEthAccPortTxDoneCallback [in] - Function to be called to return transmit buffers to the user. + * @param callbackTag UINT32 [in] - This tag shall be provided to the callback function. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxDoneCallbackRegister(IxEthAccPortId portId, + IxEthAccPortTxDoneCallback txCallbackFn, + UINT32 callbackTag); + + + +/** + * @ingroup IxEthAcc + * + * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortRxCallbackRegister + * + * It is the responsibility of the user function to free any MBUF's which it receives. + * + * @li Reentrant - yes , The user provided function should be reentrant. + * @li ISR Callable - yes , The user provided function must be callable from an ISR. + * @par + * + * This function dispatches frames to the user level + * via the provided function. The invocation shall be made for each + * frame dequeued from the Ethernet QM queue. The user is required to free any MBUF's + * supplied via this callback. In addition the registered callback must free up MBUF's + * from the receive free queue when the port is disabled + * + * If called several times the latest callback shall be registered for a particular port. + * + * <b>Calling Context </b>: + * @par + * This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun + * within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. + * The decision is system specific. + * + * + * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC + * via @a ixEthAccPortRxCallbackRegister. It allows the same callback to be used for multiple MACs. + * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Rx mbuf header. Mbufs may be chained if + * the frame length is greater than the supplied mbuf length. + * @param reserved [in] - deprecated parameter The information is passed + * thru the IxEthAccNe header destination port ID field + * (@sa IX_ETHACC_NE_DESTPORTID). For backward + * compatibility,the value is equal to IX_ETH_DB_UNKNOWN_PORT (0xff). + * + * @return void + * + * @note + * Buffers may not be filled up to the length supplied in + * @a ixEthAccPortRxFreeReplenish(). The firmware fills + * them to the previous 64 bytes boundary. The user has to be aware + * that the length of the received mbufs may be smaller than the length + * of the supplied mbufs. + * The mbuf header contains the following modified field + * @li @a IX_OSAL_MBUF_PKT_LEN is set in the header of the first mbuf and indicates + * the total frame size + * @li @a IX_OSAL_MBUF_MLEN is set each mbuf header and indicates the payload length + * @li @a IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR contains a pointer to the next + * mbuf, or NULL at the end of a chain. + * @li @a IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified. Its value is reset to NULL + * @li @a IX_OSAL_MBUF_FLAGS contains the bit 4 set for a broadcast packet and the bit 5 + * set for a multicast packet. Other bits are unmodified. + * + * <hr> + */ +typedef void (*IxEthAccPortRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF *buffer, UINT32 reserved); + +/** + * @ingroup IxEthAcc + * + * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortMultiBufferRxCallbackRegister + * + * It is the responsibility of the user function to free any MBUF's which it receives. + * + * @li Reentrant - yes , The user provided function should be reentrant. + * @li ISR Callable - yes , The user provided function must be callable from an ISR. + * @par + * + * This function dispatches many frames to the user level + * via the provided function. The invocation shall be made for multiple frames + * dequeued from the Ethernet QM queue. The user is required to free any MBUF's + * supplied via this callback. In addition the registered callback must free up MBUF's + * from the receive free queue when the port is disabled + * + * If called several times the latest callback shall be registered for a particular port. + * + * <b>Calling Context </b>: + * @par + * This callback is called in the context of the queue manager dispatch loop @a ixQmgrDispatcherLoopRun + * within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. + * The decision is system specific. + * + * + * @param callbackTag - This tag is that provided when the callback was registered for a particular MAC + * via @a ixEthAccPortMultiBufferRxCallbackRegister. It allows the same callback to be used for multiple MACs. + * @param mbuf - Pointer to an array of Rx mbuf headers. Mbufs + * may be chained if + * the frame length is greater than the supplied mbuf length. + * The end of the array contains a zeroed entry (NULL pointer). + * + * @return void + * + * @note The mbufs passed to this callback have the same structure than the + * buffers passed to @a IxEthAccPortRxCallback interfac. + * + * @note The usage of this callback is exclusive with the usage of + * @a ixEthAccPortRxCallbackRegister and @a IxEthAccPortRxCallback + * + * @sa ixEthAccPortMultiBufferRxCallbackRegister + * @sa IxEthAccPortMultiBufferRxCallback + * @sa ixEthAccPortRxCallbackRegister + * @sa IxEthAccPortRxCallback + * <hr> + */ + +typedef void (*IxEthAccPortMultiBufferRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF **buffer); + + + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortRxCallback rxCallbackFn, UINT32 callbackTag) + * + * @brief Register a callback function to allow + * the reception of frames. + * + * The registered callback function is called once a frame is received by this service. + * + * If called several times the latest callback shall be registered for a particular port. + * + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * + * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device. + * @param rxCallbackFn @ref IxEthAccPortRxCallback [in] - Function to be called when Ethernet frames are availble. + * @param callbackTag UINT32 [in] - This tag shall be provided to the callback function. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxCallbackRegister(IxEthAccPortId portId, + IxEthAccPortRxCallback rxCallbackFn, + UINT32 callbackTag); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMultiBufferRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortMultiBufferRxCallback rxCallbackFn, UINT32 callbackTag) + * + * @brief Register a callback function to allow + * the reception of frames. + * + * The registered callback function is called once a frame is + * received by this service. If many frames are already received, + * the function is called once. + * + * If called several times the latest callback shall be registered for a particular port. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * + * @param portId - Register callback for a particular MAC device. + * @param rxCallbackFn - @a IxEthAccMultiBufferRxCallbackFn - Function to be called when Ethernet frames are availble. + * @param callbackTag - This tag shall be provided to the callback function. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid. + * + * @sa ixEthAccPortMultiBufferRxCallbackRegister + * @sa IxEthAccPortMultiBufferRxCallback + * @sa ixEthAccPortRxCallbackRegister + * @sa IxEthAccPortRxCallback + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMultiBufferRxCallbackRegister(IxEthAccPortId portId, + IxEthAccPortMultiBufferRxCallback rxCallbackFn, + UINT32 callbackTag); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer) + * + * @brief This function provides buffers for the Ethernet receive path. + * + * This component does not have a buffer management mechanisms built in. All Rx buffers must be supplied to it + * via this interface. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * @param portId @ref IxEthAccPortId [in] - Provide buffers only to specific Rx MAC. + * @param buffer @ref IX_OSAL_MBUF [in] - Provide an MBUF to the Ethernet receive mechanism. + * Buffers size smaller than IX_ETHACC_RX_MBUF_MIN_SIZE may result in poor + * performances and excessive buffer chaining. Buffers + * larger than this size may be suitable for jumbo frames. + * Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR must be NULL. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Buffer has was not able to queue the + * buffer in the receive service. + * @li @a IX_ETH_ACC_FAIL : Buffer size is less than IX_ETHACC_RX_MBUF_MIN_SIZE + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * @note + * If the buffer replenish operation fails it is the responsibility + * of the user to free the buffer. + * + * @note + * Sufficient buffers must be supplied to the component to maintain + * receive throughput and avoid rx buffer underflow conditions. + * To meet this goal, It is expected that the user preload the + * component with a sufficent number of buffers prior to enabling the + * NPE Ethernet receive path. The recommended minimum number of + * buffers is 8. + * + * @note + * For maximum performances, the mbuf size should be greater + * than the maximum frame size (Ethernet header, payload and FCS) + 64. + * Supplying smaller mbufs to the service results in mbuf + * chaining and degraded performances. The recommended size + * is @a IX_ETHACC_RX_MBUF_MIN_SIZE, which is + * enough to take care of 802.3 frames and "baby jumbo" frames without + * chaining, and "jumbo" frame within chaining. + * + * @note + * Buffers may not be filled up to their length. The firware fills + * them up to the previous 64 bytes boundary. The user has to be aware + * that the length of the received mbufs may be smaller than the length + * of the supplied mbufs. + * + * @warning This function checks the parameters if the NDEBUG + * flag is not defined. Turning on the argument checking (disabled by + * default) results in a lower EthAcc performance as this function + * is part of the data path. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer); + + + +/*************************************************************** + + #### #### # # ##### ##### #### # + # # # # ## # # # # # # # + # # # # # # # # # # # # + # # # # # # # ##### # # # + # # # # # ## # # # # # # + #### #### # # # # # #### ###### + + + ##### # ## # # ###### + # # # # # ## # # + # # # # # # # # ##### + ##### # ###### # # # # + # # # # # ## # + # ###### # # # # ###### + +***************************************************************/ + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortEnable(IxEthAccPortId portId) + * + * @brief This enables an Ethernet port for both Tx and Rx. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre The port must first be initialized via @a ixEthAccPortInit and the MAC address + * must be set using @a ixEthAccUnicastMacAddressSet before enabling it + * The rx and Tx Done callbacks registration via @a + * ixEthAccPortTxDoneCallbackRegister amd @a ixEthAccPortRxCallbackRegister + * has to be done before enabling the traffic. + * + * @param portId @ref IxEthAccPortId [in] - Port id to act upon. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized + * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortDisable(IxEthAccPortId portId) + * + * @brief This disables an Ethernet port for both Tx and Rx. + * + * Free MBufs are returned to the user via the registered callback when the port is disabled + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre The port must be enabled with @a ixEthAccPortEnable, otherwise this + * function has no effect + * + * @param portId @ref IxEthAccPortId [in] - Port id to act upon. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized + * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled) + * + * @brief Get the enabled state of a port. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * @pre The port must first be initialized via @a ixEthAccPortInit + * + * @param portId @ref IxEthAccPortId [in] - Port id to act upon. + * @param enabled BOOL [out] - location to store the state of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId) + * + * @brief Put the Ethernet MAC device in non-promiscuous mode. + * + * In non-promiscuous mode the MAC filters all frames other than + * destination MAC address which matches the following criteria: + * @li Unicast address provisioned via @a ixEthAccUnicastMacAddressSet + * @li All broadcast frames. + * @li Multicast addresses provisioned via @a ixEthAccMulticastAddressJoin + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @sa ixEthAccPortPromiscuousModeSet + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId) + * + * @brief Put the MAC device in promiscuous mode. + * + * If the device is in promiscuous mode then all all received frames shall be forwared + * to the NPE for processing. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @sa ixEthAccPortPromiscuousModeClear + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortUnicastMacAddressSet( IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) + * + * @brief Configure unicast MAC address for a particular port + * + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressSet(IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortUnicastMacAddressGet( IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) + * + * @brief Get unicast MAC address for a particular MAC port + * + * @pre + * The MAC address must first be set via @a ixEthAccMacPromiscuousModeSet + * If the MAC address has not been set, the function returns a + * IX_ETH_ACC_MAC_UNINITIALIZED status + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * @param *macAddr @ref IxEthAccMacAddr [out] - Ethernet MAC address. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized. + * @li @a IX_ETH_ACC_FAIL : macAddr is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortUnicastMacAddressGet(IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + + + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressJoin( IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) + * + * @brief Add a multicast address to the MAC address table. + * + * @note + * Due to the operation of the Ethernet MAC multicast filtering mechanism, frames which do not + * have a multicast destination address which were provisioned via this API may be forwarded + * to the NPE's. This is a result of the hardware comparison algorithm used in the destination mac address logic + * within the Ethernet MAC. + * + * See Also: IXP425 hardware development manual. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Error writing to the MAC registers + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressJoin(IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressJoinAll( IxEthAccPortId portId) + * + * @brief Filter all frames with multicast dest. + * + * This function clears the MAC address table, and then sets + * the MAC to forward ALL multicast frames to the NPE. + * Specifically, it forwards all frames whose destination address + * has the LSB of the highest byte set (01:00:00:00:00:00). This + * bit is commonly referred to as the "multicast bit". + * Broadcast frames will still be forwarded. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressJoinAll(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressLeave( IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) + * + * @brief Remove a multicast address from the MAC address table. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_NO_SUCH_ADDR : Failed if MAC address was not in the table. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressLeave(IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressLeaveAll( IxEthAccPortId portId) + * + * @brief This function unconfigures the multicast filtering settings + * + * This function first clears the MAC address table, and then sets + * the MAC as configured by the promiscuous mode current settings. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressLeaveAll(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortUnicastAddressShow(IxEthAccPortId portId) + * + * @brief Displays unicast MAC address + * + * Displays unicast address which is configured using + * @a ixEthAccUnicastMacAddressSet. This function also displays the MAC filter used + * to filter multicast frames. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return void + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortUnicastAddressShow(IxEthAccPortId portId); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressShow( IxEthAccPortId portId) + * + * @brief Displays multicast MAC address + * + * Displays multicast address which have been configured using @a ixEthAccMulticastAddressJoin + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return void + * + * <hr> + */ +PUBLIC void ixEthAccPortMulticastAddressShow( IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortDuplexModeSet( IxEthAccPortId portId, IxEthAccDuplexMode mode ) + * + * @brief Set the duplex mode for the MAC. + * + * Configure the IXP400 MAC to either full or half duplex. + * + * @note + * The configuration should match that provisioned on the PHY. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * @param mode @ref IxEthAccDuplexMode [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortDuplexModeSet(IxEthAccPortId portId,IxEthAccDuplexMode mode); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortDuplexModeGet( IxEthAccPortId portId, IxEthAccDuplexMode *mode ) + * + * @brief Get the duplex mode for the MAC. + * + * return the duplex configuration of the IXP400 MAC. + * + * @note + * The configuration should match that provisioned on the PHY. + * See @a ixEthAccDuplexModeSet + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * @param *mode @ref IxEthAccDuplexMode [out] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + * + */ +PUBLIC IxEthAccStatus +ixEthAccPortDuplexModeGet(IxEthAccPortId portId,IxEthAccDuplexMode *mode ); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameAppendPaddingEnable( IxEthAccPortId portId) + * + * @brief Enable padding bytes to be appended to runt frames submitted to + * this port + * + * Enable up to 60 null-bytes padding bytes to be appended to runt frames + * submitted to this port. This is the default behavior of the access + * component. + * + * @warning Do not change this behaviour while the port is enabled. + * + * @note When Tx padding is enabled, Tx FCS generation is turned on + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @sa ixEthAccPortTxFrameAppendFCSDusable + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendPaddingEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameAppendPaddingDisable( IxEthAccPortId portId) + * + * @brief Disable padding bytes to be appended to runt frames submitted to + * this port + * + * Disable padding bytes to be appended to runt frames + * submitted to this port. This is not the default behavior of the access + * component. + * + * @warning Do not change this behaviour while the port is enabled. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendPaddingDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameAppendFCSEnable( IxEthAccPortId portId) + * + * @brief Enable the appending of Ethernet FCS to all frames submitted to this port + * + * When enabled, the FCS is added to the submitted frames. This is the default + * behavior of the access component. + * Do not change this behaviour while the port is enabled. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendFCSEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameAppendFCSDisable( IxEthAccPortId portId) + * + * @brief Disable the appending of Ethernet FCS to all frames submitted to this port. + * + * When disabled, the Ethernet FCS is not added to the submitted frames. + * This is not the default + * behavior of the access component. + * + * @note Since the FCS is not appended to the frame it is expected that the frame submitted to the + * component includes a valid FCS at the end of the data, although this will not be validated. + * + * The component shall forward the frame to the Ethernet MAC WITHOUT modification. + * + * Do not change this behaviour while the port is enabled. + * + * @note Tx FCS append is not disabled while Tx padding is enabled. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @sa ixEthAccPortTxFrameAppendPaddingEnable + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendFCSDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortRxFrameAppendFCSEnable( IxEthAccPortId portId) + * + * @brief Forward frames with FCS included in the receive buffer. + * + * The FCS is not striped from the receive buffer. + * The received frame length includes the FCS size (4 bytes). ie. + * A minimum sized ethernet frame shall have a length of 64bytes. + * + * Frame FCS validity checks are still carried out on all received frames. + * + * This is not the default + * behavior of the access component. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxFrameAppendFCSEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortRxFrameAppendFCSDisable( IxEthAccPortId portId) + * + * @brief Do not forward the FCS portion of the received Ethernet frame to the user. + * The FCS is striped from the receive buffer. + * The received frame length does not include the FCS size (4 bytes). + * Frame FCS validity checks are still carried out on all received frames. + * + * This is the default behavior of the component. + * Do not change this behaviour while the port is enabled. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxFrameAppendFCSDisable(IxEthAccPortId portId); + + + + +/** + * @ingroup IxEthAcc + * + * @enum IxEthAccSchedulerDiscipline + * + * @brief Definition for the port scheduling discipline + * + * Select the port scheduling discipline on receive and transmit path + * @li FIFO : No Priority : In this configuration all frames are processed + * in the access component in the strict order in which + * the component received them. + * @li FIFO : Priority : This shall be a very simple priority mechanism. + * Higher prior-ity frames shall be forwarded + * before lower priority frames. There shall be no + * fairness mechanisms applied across different + * priorities. Higher priority frames could starve + * lower priority frames indefinitely. + */ +typedef enum +{ + FIFO_NO_PRIORITY, /**<frames submitted with no priority*/ + FIFO_PRIORITY /**<higher prority frames submitted before lower priority*/ +}IxEthAccSchedulerDiscipline; + +/** + * @ingroup IxEthAcc + * + * @def IxEthAccTxSchedulerDiscipline + * + * @brief Deprecated definition for the port transmit scheduling discipline + */ +#define IxEthAccTxSchedulerDiscipline IxEthAccSchedulerDiscipline + + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccTxSchedulingDisciplineSet( IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched) + * + * @brief Set the port scheduling to one of @a IxEthAccSchedulerDiscipline + * + * The default behavior of the component is @a FIFO_NO_PRIORITY. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * + * @param portId @ref IxEthAccPortId [in] + * @param sched @ref IxEthAccSchedulerDiscipline [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Set appropriate discipline. + * @li @a IX_ETH_ACC_FAIL : Invalid/unsupported discipline. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccTxSchedulingDisciplineSet(IxEthAccPortId portId, + IxEthAccSchedulerDiscipline sched); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched) + * + * @brief Set the Rx scheduling to one of @a IxEthAccSchedulerDiscipline + * + * The default behavior of the component is @a FIFO_NO_PRIORITY. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @param sched : @a IxEthAccSchedulerDiscipline + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Set appropriate discipline. + * @li @a IX_ETH_ACC_FAIL : Invalid/unsupported discipline. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccNpeLoopbackEnable(IxEthAccPortId portId) + * + * @brief Enable NPE loopback + * + * When this loopback mode is enabled all the transmitted frames are + * received on the same port, without payload. + * + * This function is recommended for power-up diagnostic checks and + * should never be used under normal Ethernet traffic operations. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @param portId : ID of the port + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : NPE loopback mode enabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortNpeLoopbackEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId) + * + * @brief Disable NPE loopback + * + * This function is used to disable the NPE loopback if previously + * enabled using ixEthAccNpeLoopbackEnable. + * + * This function is recommended for power-up diagnostic checks and + * should never be used under normal Ethernet traffic operations. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : NPE loopback successfully disabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortTxEnable(IxEthAccPortId portId) + * + * @brief Enable Tx on the port + * + * This function is the complement of ixEthAccPortTxDisable and should + * be used only after Tx was disabled. A MAC core reset is required before + * this function is called (see @a ixEthAccPortMacReset). + * + * This function is the recommended usage scenario for emergency security + * shutdown and hardware failure recovery and should never be used for throttling + * traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Tx successfully enabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortTxDisable(IxEthAccPortId portId) + * + * @brief Disable Tx on the port + * + * This function can be used to disable Tx in the MAC core. + * Tx can be re-enabled, although this is not guaranteed, by performing + * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortTxEnable. + * Note that using this function is not recommended, except for shutting + * down Tx for emergency reasons. For proper port shutdown and re-enabling + * see ixEthAccPortEnable and ixEthAccPortDisable. + * + * This function is the recommended usage scenario for emergency security + * shutdown and hardware failure recovery and should never be used for throttling + * traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @pre + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Tx successfully disabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortRxEnable(IxEthAccPortId portId) + * + * @brief Enable Rx on the port + * + * This function is the complement of ixEthAccPortRxDisable and should + * be used only after Rx was disabled. + * + * This function is the recommended usage scenario for emergency security + * shutdown and hardware failure recovery and should never be used for throttling + * traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @pre + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Rx successfully enabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortRxDisable(IxEthAccPortId portId) + * + * @brief Disable Rx on the port + * + * This function can be used to disable Rx in the MAC core. + * Rx can be re-enabled, although this is not guaranteed, by performing + * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortRxEnable. + * Note that using this function is not recommended, except for shutting + * down Rx for emergency reasons. For proper port shutdown and re-enabling + * see ixEthAccPortEnable and ixEthAccPortDisable. + * + * This function is the recommended usage scenario for emergency security + * shutdown and hardware failure recovery and should never be used for throttling + * traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Rx successfully disabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortMacReset(IxEthAccPortId portId) + * + * @brief Reset MAC core on the port + * + * This function will perform a MAC core reset (NPE Ethernet coprocessor). + * This function is inherently unsafe and the NPE recovery is not guaranteed + * after this function is called. The proper manner of performing port disable + * and enable (which will reset the MAC as well) is ixEthAccPortEnable/ixEthAccPortDisable. + * + * This function is the recommended usage scenario for hardware failure recovery + * and should never be used for throttling traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : MAC core reset + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMacReset(IxEthAccPortId portId); + +/********************************************************************************* + #### ##### ## ##### # #### ##### # #### #### + # # # # # # # # # # # # + #### # # # # # #### # # # #### + # # ###### # # # # # # # + # # # # # # # # # # # # # # # + #### # # # # # #### # # #### #### +**********************************************************************************/ + + +/** + * + * @brief This struct defines the statistics returned by this component. + * + * The component returns MIB2 EthObj variables which are obtained from the + * hardware or maintained by this component. + * + * + */ +typedef struct +{ + UINT32 dot3StatsAlignmentErrors; /**< link error count (rx) */ + UINT32 dot3StatsFCSErrors; /**< link error count (rx) */ + UINT32 dot3StatsInternalMacReceiveErrors; /**< link error count (rx) */ + UINT32 RxOverrunDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxLearnedEntryDiscards; /**< NPE: discarded frames count(rx) */ + UINT32 RxLargeFramesDiscards; /**< NPE: discarded frames count(rx) */ + UINT32 RxSTPBlockedDiscards; /**< NPE: discarded frames count(rx) */ + UINT32 RxVLANTypeFilterDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxVLANIdFilterDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxInvalidSourceDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxBlackListDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxWhiteListDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxUnderflowEntryDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 dot3StatsSingleCollisionFrames; /**< link error count (tx) */ + UINT32 dot3StatsMultipleCollisionFrames; /**< link error count (tx) */ + UINT32 dot3StatsDeferredTransmissions; /**< link error count (tx) */ + UINT32 dot3StatsLateCollisions; /**< link error count (tx) */ + UINT32 dot3StatsExcessiveCollsions; /**< link error count (tx) */ + UINT32 dot3StatsInternalMacTransmitErrors; /**< link error count (tx) */ + UINT32 dot3StatsCarrierSenseErrors; /**< link error count (tx) */ + UINT32 TxLargeFrameDiscards; /**< NPE: discarded frames count (tx) */ + UINT32 TxVLANIdFilterDiscards; /**< NPE: discarded frames count (tx) */ + +}IxEthEthObjStats; + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMibIIStatsGet(IxEthAccPortId portId ,IxEthEthObjStats *retStats ) + * + * @brief Returns the statistics maintained for a port. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * + * @param portId @ref IxEthAccPortId [in] + * @param retStats @ref IxEthEthObjStats [out] + * @note Please note the user is responsible for cache coheriency of the retStat + * buffer. The data is actually populated via the NPE's. As such cache safe + * memory should be used in the retStats argument. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Invalid arguments. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMibIIStatsGet(IxEthAccPortId portId, IxEthEthObjStats *retStats ); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats) + * + * @brief Returns and clears the statistics maintained for a port. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * @pre + * + * @param portId @ref IxEthAccPortId [in] + * @param retStats @ref IxEthEthObjStats [out] + * @note Please note the user is responsible for cache coheriency of the retStats + * buffer. The data is actually populated via the NPE's. As such cache safe + * memory should be used in the retStats argument. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : invalid arguments. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMibIIStatsClear(IxEthAccPortId portId) + * + * @brief Clears the statistics maintained for a port. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Invalid arguments. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccMibIIStatsClear(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMacInit(IxEthAccPortId portId) + * + * @brief Initializes the ethernet MAC settings + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccMacInit(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccStatsShow(IxEthAccPortId portId) + * + * + * @brief Displays a ports statistics on the standard io console using printf. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre + * + * @param portId @ref IxEthAccPortId [in] + * + * @return void + * + * <hr> + */ +PUBLIC void ixEthAccStatsShow(IxEthAccPortId portId); + +/************************************************************************* + + # # # # # # ##### # #### + ## ## # # ## ## # # # # # + # ## # # # # ## # # # # # # + # # # # # # # # # # # + # # # # # # # # # # # + # # # # # # ##### # #### + +*************************************************************************/ + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMiiReadRtn (UINT8 phyAddr, + UINT8 phyReg, + UINT16 *value) + * + * + * @brief Reads a 16 bit value from a PHY + * + * Reads a 16-bit word from a register of a MII-compliant PHY. Reading + * is performed through the MII management interface. This function returns + * when the read operation has successfully completed, or when a timeout has elapsed. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. + * + * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31) + * @param phyReg UINT8 [in] - the number of the MII register to read (0-31) + * @param value UINT16 [in] - the value read from the register + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : failed to read the register. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMiiReadRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 *value); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMiiWriteRtn (UINT8 phyAddr, + UINT8 phyReg, + UINT16 value) + * + * + * @brief Writes a 16 bit value to a PHY + * + * Writes a 16-bit word from a register of a MII-compliant PHY. Writing + * is performed through the MII management interface. This function returns + * when the write operation has successfully completed, or when a timeout has elapsed. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. + * + * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31) + * @param phyReg UINT8 [in] - the number of the MII register to write (0-31) + * @param value UINT16 [out] - the value to write to the register + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : failed to write register. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMiiWriteRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 value); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMiiAccessTimeoutSet(UINT32 timeout) + * + * @brief Overrides the default timeout value and retry count when reading or + * writing MII registers using ixEthAccMiiWriteRtn or ixEthAccMiiReadRtn + * + * The default behavior of the component is to use a IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS ms + * timeout (declared as 100 in IxEthAccMii_p.h) and a retry count of IX_ETH_ACC_MII_TIMEOUT_10TH_SECS + * (declared as 5 in IxEthAccMii_p.h). + * + * The MII read and write functions will attempt to read the status of the register up + * to the retry count times, delaying between each attempt with the timeout value. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre + * + * @param timeout UINT32 [in] - new timeout value, in milliseconds + * @param timeout UINT32 [in] - new retry count (a minimum value of 1 must be used) + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : invalid parameter(s) + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMiiAccessTimeoutSet(UINT32 timeout, UINT32 retryCount); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMiiStatsShow (UINT32 phyAddr) + * + * + * @brief Displays detailed information on a specified PHY + * + * Displays the current values of the first eigth MII registers for a PHY, + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and + * generating the MDIO clock. + * + * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : invalid arguments. + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccMiiStatsShow (UINT32 phyAddr); + + + +/******* BOARD SPECIFIC DEPRECATED API *********/ + +/* The following functions are high level functions which rely + * on the properties and interface of some Ethernet PHYs. The + * implementation is hardware specific and has been moved to + * the hardware-specific component IxEthMii. + */ + + #include "IxEthMii.h" + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiPhyScan + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiPhyScan + * + * @note this feature is board specific + * + */ +#define ixEthAccMiiPhyScan(phyPresent) ixEthMiiPhyScan(phyPresent,IXP425_ETH_ACC_MII_MAX_ADDR) + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiPhyConfig + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiPhyConfig + * + * @note this feature is board specific + */ +#define ixEthAccMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate) \ + ixEthMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate) + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiPhyReset + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiPhyReset + * + * @note this feature is board specific + */ +#define ixEthAccMiiPhyReset(phyAddr) \ + ixEthMiiPhyReset(phyAddr) + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiLinkStatus + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiLinkStatus + * + * @note this feature is board specific + */ +#define ixEthAccMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg) \ + ixEthMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg) + + + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiShow + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiPhyShow + * + * @note this feature is board specific + */ +#define ixEthAccMiiShow(phyAddr) \ + ixEthMiiPhyShow(phyAddr) + +#endif /* ndef IxEthAcc_H */ +/** + *@} + */ |