diff options
61 files changed, 5458 insertions, 232 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 7a13d28df..e87a197ad 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -62,6 +62,10 @@ Oliver Brown <obrown@adventnetworks.com> gw8260 MPC8260 +Cyril Chemparathy <cyril@ti.com> + + tnetv107x_evm tnetv107x + Conn Clark <clark@esteem.com> ESTEEM192E MPC8xx @@ -228,6 +232,7 @@ Ilko Iliev <iliev@ronetix.at> PM9261 AT91SAM9261 PM9263 AT91SAM9263 + PM9G45 ARM926EJS (AT91SAM9G45 SoC) Gary Jennejohn <garyj@denx.de> @@ -600,6 +605,10 @@ Kshitij Gupta <kshitij@ti.com> omap1510inn ARM925T omap1610inn ARM926EJS +Vaibhav Hiremath <hvaibhav@ti.com> + + am3517_evm ARM CORTEX-A8 (AM35x SoC) + Grazvydas Ignotas <notasas@gmail.com> omap3_pandora ARM CORTEX-A8 (OMAP3xx SoC) @@ -626,14 +635,15 @@ Simon Kagstrom <simon.kagstrom@netinsight.net> openrd_base ARM926EJS (Kirkwood SoC) -Minkyu Kang <mk7.kang@samsung.com> - - SMDKC100 ARM CORTEX-A8 (S5PC100 SoC) - Nishant Kamat <nskamat@ti.com> omap1610h2 ARM926EJS +Minkyu Kang <mk7.kang@samsung.com> + + s5p_goni ARM CORTEX-A8 (S5PC110 SoC) + SMDKC100 ARM CORTEX-A8 (S5PC100 SoC) + Frederik Kriewitz <frederik@kriewitz.eu> devkit8000 ARM CORTEX-A8 (OMAP3530 SoC) @@ -635,12 +635,14 @@ LIST_ARM11=" \ mx31pdk_nand \ qong \ smdk6400 \ + tnetv107x_evm \ " ######################################################################### ## ARM Cortex-A8 Systems ######################################################################### LIST_ARM_CORTEX_A8=" \ + am3517_evm \ devkit8000 \ mx51evk \ omap3_beagle \ @@ -650,6 +652,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_sdp3430 \ omap3_zoom1 \ omap3_zoom2 \ + s5p_goni \ smdkc100 \ " @@ -682,6 +685,7 @@ LIST_at91=" \ otc570 \ pm9261 \ pm9263 \ + pm9g45 \ SBC35_A9G20 \ TNY_A9260 \ TNY_A9G20 \ @@ -2873,6 +2873,10 @@ otc570_config : unconfig pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 +pm9g45_config : unconfig + @mkdir -p $(obj)include + @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91 + SBC35_A9G20_NANDFLASH_config \ SBC35_A9G20_EEPROM_config \ SBC35_A9G20_config : unconfig @@ -3155,6 +3159,9 @@ SMN42_config : unconfig ## ARM CORTEX Systems ######################################################################### +am3517_evm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 am3517evm logicpd omap3 + devkit8000_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3 @@ -3179,6 +3186,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 +s5p_goni_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 goni samsung s5pc1xx + smdkc100_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx @@ -3324,6 +3334,9 @@ smdk6400_config : unconfig fi @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk +tnetv107x_evm_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm1176 tnetv107xevm ti tnetv107x + #======================================================================== # i386 #======================================================================== diff --git a/arch/arm/cpu/arm1136/cpu.c b/arch/arm/cpu/arm1136/cpu.c index ade7f4680..2b9163173 100644 --- a/arch/arm/cpu/arm1136/cpu.c +++ b/arch/arm/cpu/arm1136/cpu.c @@ -71,6 +71,7 @@ static void cache_flush(void) { unsigned long i = 0; + asm ("mcr p15, 0, %0, c7, c10, 0": :"r" (i)); /* clean entire data cache */ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); /* invalidate both caches and flush btb */ asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); /* mem barrier to sync things */ } diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 957f4389b..922d01cb7 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -226,8 +226,8 @@ cpu_init_crit: * flush v4 I/D caches */ mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + mcr p15, 0, r0, c7, c7, 0 /* Invalidate I+D+BTB caches */ + mcr p15, 0, r0, c8, c7, 0 /* Invalidate Unified TLB */ /* * disable MMU stuff and caches diff --git a/arch/arm/cpu/arm1176/cpu.c b/arch/arm/cpu/arm1176/cpu.c index befa0cdcc..c0fd114e1 100644 --- a/arch/arm/cpu/arm1176/cpu.c +++ b/arch/arm/cpu/arm1176/cpu.c @@ -33,9 +33,6 @@ #include <common.h> #include <command.h> -#ifdef CONFIG_S3C64XX -#include <asm/arch/s3c6400.h> -#endif #include <asm/system.h> static void cache_flush (void); diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index e2b6c9b08..a540edbfb 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -1,5 +1,5 @@ /* - * armboot - Startup Code for S3C6400/ARM1176 CPU-core + * armboot - Startup Code for ARM1176 CPU-core * * Copyright (c) 2007 Samsung Electronics * @@ -35,9 +35,6 @@ #ifdef CONFIG_ENABLE_MMU #include <asm/proc/domain.h> #endif -#ifdef CONFIG_S3C64XX -#include <asm/arch/s3c6400.h> -#endif #if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE) #define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE @@ -172,14 +169,10 @@ cpu_init_crit: bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) orr r0, r0, #0x00000002 @ set bit 2 (A) Align orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache + /* Prepare to disable the MMU */ - adr r1, mmu_disable_phys - /* We presume we're within the first 1024 bytes */ - and r1, r1, #0x3fc - ldr r2, _TEXT_PHY_BASE - ldr r3, =0xfff00000 - and r2, r2, r3 - orr r2, r2, r1 + adr r2, mmu_disable_phys + sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - TEXT_BASE) b mmu_disable .align 5 @@ -189,14 +182,30 @@ mmu_disable: nop nop mov pc, r2 +mmu_disable_phys: + +#ifdef CONFIG_DISABLE_TCM + /* + * Disable the TCMs + */ + mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */ + cmp r0, #0 + beq skip_tcmdisable + mov r1, #0 + mov r2, #1 + tst r0, r2 + mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/ + tst r0, r2, LSL #16 + mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/ +skip_tcmdisable: +#endif #endif -mmu_disable_phys: -#ifdef CONFIG_S3C64XX +#ifdef CONFIG_PERIPORT_REMAP /* Peri port setup */ - ldr r0, =0x70000000 - orr r0, r0, #0x13 - mcr p15,0,r0,c15,c2,4 @ 256M (0x70000000 - 0x7fffffff) + ldr r0, =CONFIG_PERIPORT_BASE + orr r0, r0, #CONFIG_PERIPORT_SIZE + mcr p15,0,r0,c15,c2,4 #endif /* @@ -204,7 +213,25 @@ mmu_disable_phys: */ bl lowlevel_init /* go setup pll,mux,memory */ -after_copy: +#ifndef CONFIG_SKIP_RELOCATE_UBOOT +relocate: /* relocate U-Boot to RAM */ + adr r0, _start /* r0 <- current position of code */ + ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ + cmp r0, r1 /* don't reloc during debug */ + beq stack_setup + + ldr r2, _armboot_start + ldr r3, _bss_start + sub r2, r3, r2 /* r2 <- size of armboot */ + add r2, r0, r2 /* r2 <- source end address */ + +copy_loop: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end addreee [r2] */ + ble copy_loop +#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ + #ifdef CONFIG_ENABLE_MMU enable_mmu: /* enable domain access */ @@ -240,9 +267,9 @@ mmu_enable: nop nop mov pc, r2 +skip_hw_init: #endif -skip_hw_init: /* Set up the stack */ stack_setup: ldr r0, =CONFIG_SYS_UBOOT_BASE /* base of copy in DRAM */ @@ -310,6 +337,8 @@ phy_last_jump: mov r0, #0 mov pc, r9 #endif + + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm1176/tnetv107x/Makefile b/arch/arm/cpu/arm1176/tnetv107x/Makefile new file mode 100644 index 000000000..fe9d8a0dc --- /dev/null +++ b/arch/arm/cpu/arm1176/tnetv107x/Makefile @@ -0,0 +1,44 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS += aemif.o clock.o init.o mux.o timer.o wdt.o +SOBJS += lowlevel_init.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) + +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm1176/tnetv107x/aemif.c b/arch/arm/cpu/arm1176/tnetv107x/aemif.c new file mode 100644 index 000000000..172f583bc --- /dev/null +++ b/arch/arm/cpu/arm1176/tnetv107x/aemif.c @@ -0,0 +1,93 @@ +/* + * TNETV107X: Asynchronous EMIF Configuration + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/mux.h> + +#define ASYNC_EMIF_BASE TNETV107X_ASYNC_EMIF_CNTRL_BASE +#define ASYNC_EMIF_CONFIG(cs) (ASYNC_EMIF_BASE+0x10+(cs)*4) +#define ASYNC_EMIF_ONENAND_CONTROL (ASYNC_EMIF_BASE+0x5c) +#define ASYNC_EMIF_NAND_CONTROL (ASYNC_EMIF_BASE+0x60) +#define ASYNC_EMIF_WAITCYCLE_CONFIG (ASYNC_EMIF_BASE+0x4) + +#define CONFIG_SELECT_STROBE(v) ((v) ? 1 << 31 : 0) +#define CONFIG_EXTEND_WAIT(v) ((v) ? 1 << 30 : 0) +#define CONFIG_WR_SETUP(v) (((v) & 0x0f) << 26) +#define CONFIG_WR_STROBE(v) (((v) & 0x3f) << 20) +#define CONFIG_WR_HOLD(v) (((v) & 0x07) << 17) +#define CONFIG_RD_SETUP(v) (((v) & 0x0f) << 13) +#define CONFIG_RD_STROBE(v) (((v) & 0x3f) << 7) +#define CONFIG_RD_HOLD(v) (((v) & 0x07) << 4) +#define CONFIG_TURN_AROUND(v) (((v) & 0x03) << 2) +#define CONFIG_WIDTH(v) (((v) & 0x03) << 0) + +#define NUM_CS 4 + +#define set_config_field(reg, field, val) \ + do { \ + if (val != -1) { \ + reg &= ~CONFIG_##field(0xffffffff); \ + reg |= CONFIG_##field(val); \ + } \ + } while (0) + +void configure_async_emif(int cs, struct async_emif_config *cfg) +{ + unsigned long tmp; + + if (cfg->mode == ASYNC_EMIF_MODE_NAND) { + tmp = __raw_readl(ASYNC_EMIF_NAND_CONTROL); + tmp |= (1 << cs); + __raw_writel(tmp, ASYNC_EMIF_NAND_CONTROL); + + } else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) { + tmp = __raw_readl(ASYNC_EMIF_ONENAND_CONTROL); + tmp |= (1 << cs); + __raw_writel(tmp, ASYNC_EMIF_ONENAND_CONTROL); + } + + tmp = __raw_readl(ASYNC_EMIF_CONFIG(cs)); + + set_config_field(tmp, SELECT_STROBE, cfg->select_strobe); + set_config_field(tmp, EXTEND_WAIT, cfg->extend_wait); + set_config_field(tmp, WR_SETUP, cfg->wr_setup); + set_config_field(tmp, WR_STROBE, cfg->wr_strobe); + set_config_field(tmp, WR_HOLD, cfg->wr_hold); + set_config_field(tmp, RD_SETUP, cfg->rd_setup); + set_config_field(tmp, RD_STROBE, cfg->rd_strobe); + set_config_field(tmp, RD_HOLD, cfg->rd_hold); + set_config_field(tmp, TURN_AROUND, cfg->turn_around); + set_config_field(tmp, WIDTH, cfg->width); + + __raw_writel(tmp, ASYNC_EMIF_CONFIG(cs)); +} + +void init_async_emif(int num_cs, struct async_emif_config *config) +{ + int cs; + + clk_enable(TNETV107X_LPSC_AEMIF); + + for (cs = 0; cs < num_cs; cs++) + configure_async_emif(cs, config + cs); +} diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c new file mode 100644 index 000000000..e26fec1f9 --- /dev/null +++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c @@ -0,0 +1,451 @@ +/* + * TNETV107X: Clock management APIs + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm-generic/errno.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/arch/clock.h> + +#define CLOCK_BASE TNETV107X_CLOCK_CONTROL_BASE +#define PSC_BASE TNETV107X_PSC_BASE + +#define BIT(x) (1 << (x)) + +#define MAX_PREDIV 64 +#define MAX_POSTDIV 8 +#define MAX_MULT 512 +#define MAX_DIV (MAX_PREDIV * MAX_POSTDIV) + +/* LPSC registers */ +#define PSC_PTCMD 0x120 +#define PSC_PTSTAT 0x128 +#define PSC_MDSTAT(n) (0x800 + (n) * 4) +#define PSC_MDCTL(n) (0xA00 + (n) * 4) + +#define PSC_MDCTL_LRSTZ BIT(8) + +#define psc_reg_read(reg) __raw_readl((u32 *)(PSC_BASE + (reg))) +#define psc_reg_write(reg, val) __raw_writel(val, (u32 *)(PSC_BASE + (reg))) + +/* SSPLL registers */ +struct sspll_regs { + u32 modes; + u32 postdiv; + u32 prediv; + u32 mult_factor; + u32 divider_range; + u32 bw_divider; + u32 spr_amount; + u32 spr_rate_div; + u32 diag; +}; + +/* SSPLL base addresses */ +static struct sspll_regs *sspll_regs[] = { + (struct sspll_regs *)(CLOCK_BASE + 0x040), + (struct sspll_regs *)(CLOCK_BASE + 0x080), + (struct sspll_regs *)(CLOCK_BASE + 0x0c0), +}; + +#define sspll_reg(pll, reg) (&(sspll_regs[pll]->reg)) +#define sspll_reg_read(pll, reg) __raw_readl(sspll_reg(pll, reg)) +#define sspll_reg_write(pll, reg, val) __raw_writel(val, sspll_reg(pll, reg)) + + +/* PLL Control Registers */ +struct pllctl_regs { + u32 ctl; /* 00 */ + u32 ocsel; /* 04 */ + u32 secctl; /* 08 */ + u32 __pad0; + u32 mult; /* 10 */ + u32 prediv; /* 14 */ + u32 div1; /* 18 */ + u32 div2; /* 1c */ + u32 div3; /* 20 */ + u32 oscdiv1; /* 24 */ + u32 postdiv; /* 28 */ + u32 bpdiv; /* 2c */ + u32 wakeup; /* 30 */ + u32 __pad1; + u32 cmd; /* 38 */ + u32 stat; /* 3c */ + u32 alnctl; /* 40 */ + u32 dchange; /* 44 */ + u32 cken; /* 48 */ + u32 ckstat; /* 4c */ + u32 systat; /* 50 */ + u32 ckctl; /* 54 */ + u32 __pad2[2]; + u32 div4; /* 60 */ + u32 div5; /* 64 */ + u32 div6; /* 68 */ + u32 div7; /* 6c */ + u32 div8; /* 70 */ +}; + +struct lpsc_map { + int pll, div; +}; + +static struct pllctl_regs *pllctl_regs[] = { + (struct pllctl_regs *)(CLOCK_BASE + 0x700), + (struct pllctl_regs *)(CLOCK_BASE + 0x300), + (struct pllctl_regs *)(CLOCK_BASE + 0x500), +}; + +#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg)) +#define pllctl_reg_read(pll, reg) __raw_readl(pllctl_reg(pll, reg)) +#define pllctl_reg_write(pll, reg, val) __raw_writel(val, pllctl_reg(pll, reg)) + +#define pllctl_reg_rmw(pll, reg, mask, val) \ + pllctl_reg_write(pll, reg, \ + (pllctl_reg_read(pll, reg) & ~(mask)) | val) + +#define pllctl_reg_setbits(pll, reg, mask) \ + pllctl_reg_rmw(pll, reg, 0, mask) + +#define pllctl_reg_clrbits(pll, reg, mask) \ + pllctl_reg_rmw(pll, reg, mask, 0) + +/* PLLCTL Bits */ +#define PLLCTL_CLKMODE BIT(8) +#define PLLCTL_PLLSELB BIT(7) +#define PLLCTL_PLLENSRC BIT(5) +#define PLLCTL_PLLDIS BIT(4) +#define PLLCTL_PLLRST BIT(3) +#define PLLCTL_PLLPWRDN BIT(1) +#define PLLCTL_PLLEN BIT(0) + +#define PLLDIV_ENABLE BIT(15) + +static int pll_div_offset[] = { +#define div_offset(reg) offsetof(struct pllctl_regs, reg) + div_offset(div1), div_offset(div2), div_offset(div3), + div_offset(div4), div_offset(div5), div_offset(div6), + div_offset(div7), div_offset(div8), +}; + +static unsigned long pll_bypass_mask[] = { 1, 4, 2 }; +static unsigned long pll_div_mask[] = { 0x01ff, 0x00ff, 0x00ff }; + +/* Mappings from PLL+DIV to subsystem clocks */ +#define sys_arm1176_clk {SYS_PLL, 0} +#define sys_dsp_clk {SYS_PLL, 1} +#define sys_ddr_clk {SYS_PLL, 2} +#define sys_full_clk {SYS_PLL, 3} +#define sys_lcd_clk {SYS_PLL, 4} +#define sys_vlynq_ref_clk {SYS_PLL, 5} +#define sys_tsc_clk {SYS_PLL, 6} +#define sys_half_clk {SYS_PLL, 7} + +#define eth_clk_5 {ETH_PLL, 0} +#define eth_clk_50 {ETH_PLL, 1} +#define eth_clk_125 {ETH_PLL, 2} +#define eth_clk_250 {ETH_PLL, 3} +#define eth_clk_25 {ETH_PLL, 4} + +#define tdm_clk {TDM_PLL, 0} +#define tdm_extra_clk {TDM_PLL, 1} +#define tdm1_clk {TDM_PLL, 2} + +/* Optimization barrier */ +#define barrier() \ + __asm__ __volatile__("mov r0, r0\n" : : : "memory"); + +static const struct lpsc_map lpsc_clk_map[] = { + [TNETV107X_LPSC_ARM] = sys_arm1176_clk, + [TNETV107X_LPSC_GEM] = sys_dsp_clk, + [TNETV107X_LPSC_DDR2_PHY] = sys_ddr_clk, + [TNETV107X_LPSC_TPCC] = sys_full_clk, + [TNETV107X_LPSC_TPTC0] = sys_full_clk, + [TNETV107X_LPSC_TPTC1] = sys_full_clk, + [TNETV107X_LPSC_RAM] = sys_full_clk, + [TNETV107X_LPSC_MBX_LITE] = sys_arm1176_clk, + [TNETV107X_LPSC_LCD] = sys_lcd_clk, + [TNETV107X_LPSC_ETHSS] = eth_clk_125, + [TNETV107X_LPSC_AEMIF] = sys_full_clk, + [TNETV107X_LPSC_CHIP_CFG] = sys_half_clk, + [TNETV107X_LPSC_TSC] = sys_tsc_clk, + [TNETV107X_LPSC_ROM] = sys_half_clk, + [TNETV107X_LPSC_UART2] = sys_half_clk, + [TNETV107X_LPSC_PKTSEC] = sys_half_clk, + [TNETV107X_LPSC_SECCTL] = sys_half_clk, + [TNETV107X_LPSC_KEYMGR] = sys_half_clk, + [TNETV107X_LPSC_KEYPAD] = sys_half_clk, + [TNETV107X_LPSC_GPIO] = sys_half_clk, + [TNETV107X_LPSC_MDIO] = sys_half_clk, + [TNETV107X_LPSC_SDIO0] = sys_half_clk, + [TNETV107X_LPSC_UART0] = sys_half_clk, + [TNETV107X_LPSC_UART1] = sys_half_clk, + [TNETV107X_LPSC_TIMER0] = sys_half_clk, + [TNETV107X_LPSC_TIMER1] = sys_half_clk, + [TNETV107X_LPSC_WDT_ARM] = sys_half_clk, + [TNETV107X_LPSC_WDT_DSP] = sys_half_clk, + [TNETV107X_LPSC_SSP] = sys_half_clk, + [TNETV107X_LPSC_TDM0] = tdm_clk, + [TNETV107X_LPSC_VLYNQ] = sys_vlynq_ref_clk, + [TNETV107X_LPSC_MCDMA] = sys_half_clk, + [TNETV107X_LPSC_USB0] = sys_half_clk, + [TNETV107X_LPSC_TDM1] = tdm1_clk, + [TNETV107X_LPSC_DEBUGSS] = sys_half_clk, + [TNETV107X_LPSC_ETHSS_RGMII] = eth_clk_250, + [TNETV107X_LPSC_SYSTEM] = sys_half_clk, + [TNETV107X_LPSC_IMCOP] = sys_dsp_clk, + [TNETV107X_LPSC_SPARE] = sys_half_clk, + [TNETV107X_LPSC_SDIO1] = sys_half_clk, + [TNETV107X_LPSC_USB1] = sys_half_clk, + [TNETV107X_LPSC_USBSS] = sys_half_clk, + [TNETV107X_LPSC_DDR2_EMIF1_VRST] = sys_ddr_clk, + [TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST] = sys_ddr_clk, +}; + +static const unsigned long pll_ext_freq[] = { + [SYS_PLL] = CONFIG_PLL_SYS_EXT_FREQ, + [ETH_PLL] = CONFIG_PLL_ETH_EXT_FREQ, + [TDM_PLL] = CONFIG_PLL_TDM_EXT_FREQ, +}; + +static unsigned long pll_freq_get(int pll) +{ + unsigned long mult = 1, prediv = 1, postdiv = 1; + unsigned long ref = CONFIG_SYS_INT_OSC_FREQ; + unsigned long ret; + u32 bypass; + + bypass = __raw_readl((u32 *)(CLOCK_BASE)); + if (!(bypass & pll_bypass_mask[pll])) { + mult = sspll_reg_read(pll, mult_factor); + prediv = sspll_reg_read(pll, prediv) + 1; + postdiv = sspll_reg_read(pll, postdiv) + 1; + } + + if (pllctl_reg_read(pll, ctl) & PLLCTL_CLKMODE) + ref = pll_ext_freq[pll]; + + if (!(pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN)) + return ref; + + ret = (unsigned long)(ref + ((unsigned long long)ref * mult) / 256); + ret /= (prediv * postdiv); + + return ret; +} + +static unsigned long __pll_div_freq_get(int pll, unsigned int fpll, + int div) +{ + int divider = 1; + unsigned long divreg; + + divreg = __raw_readl((void *)pllctl_regs[pll] + pll_div_offset[div]); + + if (divreg & PLLDIV_ENABLE) + divider = (divreg & pll_div_mask[pll]) + 1; + + return fpll / divider; +} + +static unsigned long pll_div_freq_get(int pll, int div) +{ + unsigned int fpll = pll_freq_get(pll); + + return __pll_div_freq_get(pll, fpll, div); +} + +static void __pll_div_freq_set(int pll, unsigned int fpll, int div, + unsigned long hz) +{ + int divider = (fpll / hz - 1); + + divider &= pll_div_mask[pll]; + divider |= PLLDIV_ENABLE; + + __raw_writel(divider, (void *)pllctl_regs[pll] + pll_div_offset[div]); + pllctl_reg_setbits(pll, alnctl, (1 << div)); + pllctl_reg_setbits(pll, dchange, (1 << div)); +} + +static unsigned long pll_div_freq_set(int pll, int div, unsigned long hz) +{ + unsigned int fpll = pll_freq_get(pll); + + __pll_div_freq_set(pll, fpll, div, hz); + + pllctl_reg_write(pll, cmd, 1); + + /* Wait until new divider takes effect */ + while (pllctl_reg_read(pll, stat) & 0x01); + + return __pll_div_freq_get(pll, fpll, div); +} + +unsigned long clk_get_rate(unsigned int clk) +{ + return pll_div_freq_get(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div); +} + +unsigned long clk_round_rate(unsigned int clk, unsigned long hz) +{ + unsigned long fpll, divider, pll; + + pll = lpsc_clk_map[clk].pll; + fpll = pll_freq_get(pll); + divider = (fpll / hz - 1); + divider &= pll_div_mask[pll]; + + return fpll / (divider + 1); +} + +int clk_set_rate(unsigned int clk, unsigned long _hz) +{ + unsigned long hz; + + hz = clk_round_rate(clk, _hz); + if (hz != _hz) + return -EINVAL; /* Cannot set to target freq */ + + pll_div_freq_set(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div, hz); + return 0; +} + +void lpsc_control(int mod, unsigned long state, int lrstz) +{ + u32 mdctl; + + mdctl = psc_reg_read(PSC_MDCTL(mod)); + mdctl &= ~0x1f; + mdctl |= state; + + if (lrstz == 0) + mdctl &= ~PSC_MDCTL_LRSTZ; + else if (lrstz == 1) + mdctl |= PSC_MDCTL_LRSTZ; + + psc_reg_write(PSC_MDCTL(mod), mdctl); + + psc_reg_write(PSC_PTCMD, 1); + + /* wait for power domain transition to end */ + while (psc_reg_read(PSC_PTSTAT) & 1); + + /* Wait for module state change */ + while ((psc_reg_read(PSC_MDSTAT(mod)) & 0x1f) != state); +} + +int lpsc_status(unsigned int id) +{ + return psc_reg_read(PSC_MDSTAT(id)) & 0x1f; +} + +static void init_pll(const struct pll_init_data *data) +{ + unsigned long fpll; + unsigned long best_pre = 0, best_post = 0, best_mult = 0; + unsigned long div, prediv, postdiv, mult; + unsigned long delta, actual; + long best_delta = -1; + int i; + u32 tmp; + + if (data->pll == SYS_PLL) + return; /* cannot reconfigure system pll on the fly */ + + tmp = pllctl_reg_read(data->pll, ctl); + if (data->internal_osc) { + tmp &= ~PLLCTL_CLKMODE; + fpll = CONFIG_SYS_INT_OSC_FREQ; + } else { + tmp |= PLLCTL_CLKMODE; + fpll = pll_ext_freq[data->pll]; + } + pllctl_reg_write(data->pll, ctl, tmp); + + mult = data->pll_freq / fpll; + for (mult = MAX(mult, 1); mult <= MAX_MULT; mult++) { + div = (fpll * mult) / data->pll_freq; + if (div < 1 || div > MAX_DIV) + continue; + + for (postdiv = 1; postdiv <= min(div, MAX_POSTDIV); postdiv++) { + prediv = div / postdiv; + if (prediv < 1 || prediv > MAX_PREDIV) + continue; + + actual = (fpll / prediv) * (mult / postdiv); + delta = (actual - data->pll_freq); + if (delta < 0) + delta = -delta; + if ((delta < best_delta) || (best_delta == -1)) { + best_delta = delta; + best_mult = mult; + best_pre = prediv; + best_post = postdiv; + if (delta == 0) + goto done; + } + } + } +done: + + if (best_delta == -1) { + printf("pll cannot derive %lu from %lu\n", + data->pll_freq, fpll); + return; + } + + fpll = fpll * best_mult; + fpll /= best_pre * best_post; + + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC); + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN); + + pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST); + + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN); + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLDIS); + + sspll_reg_write(data->pll, mult_factor, (best_mult - 1) << 8); + sspll_reg_write(data->pll, prediv, best_pre - 1); + sspll_reg_write(data->pll, postdiv, best_post - 1); + + for (i = 0; i < 10; i++) + if (data->div_freq[i]) + __pll_div_freq_set(data->pll, fpll, i, + data->div_freq[i]); + + pllctl_reg_write(data->pll, cmd, 1); + + /* Wait until pll "go" operation completes */ + while (pllctl_reg_read(data->pll, stat) & 0x01); + + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST); + pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN); +} + +void init_plls(int num_pll, struct pll_init_data *config) +{ + int i; + + for (i = 0; i < num_pll; i++) + init_pll(&config[i]); +} diff --git a/arch/arm/cpu/arm1176/tnetv107x/init.c b/arch/arm/cpu/arm1176/tnetv107x/init.c new file mode 100644 index 000000000..ce3a02550 --- /dev/null +++ b/arch/arm/cpu/arm1176/tnetv107x/init.c @@ -0,0 +1,37 @@ +/* + * TNETV107X: Architecture initialization + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> + +void chip_configuration_unlock(void) +{ + __raw_writel(TNETV107X_KICK0_MAGIC, TNETV107X_KICK0); + __raw_writel(TNETV107X_KICK1_MAGIC, TNETV107X_KICK1); +} + +int arch_cpu_init(void) +{ + icache_enable(); + chip_configuration_unlock(); + + return 0; +} diff --git a/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S b/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S new file mode 100644 index 000000000..3ee32ef96 --- /dev/null +++ b/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S @@ -0,0 +1,25 @@ +/* + * TNETV107X: Low-level pre-relocation initialization + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +.globl lowlevel_init +lowlevel_init: + /* nothing for now, maybe needed for more exotic boot modes */ + mov pc, lr diff --git a/arch/arm/cpu/arm1176/tnetv107x/mux.c b/arch/arm/cpu/arm1176/tnetv107x/mux.c new file mode 100644 index 000000000..ccc53141f --- /dev/null +++ b/arch/arm/cpu/arm1176/tnetv107x/mux.c @@ -0,0 +1,334 @@ +/* + * TNETV107X: Pinmux configuration + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/mux.h> + +#define MUX_MODE_1 0x00 +#define MUX_MODE_2 0x04 +#define MUX_MODE_3 0x0c +#define MUX_MODE_4 0x1c + +#define MUX_DEBUG 0 + +static const struct pin_config pin_table[] = { + /* reg shift mode */ + TNETV107X_MUX_CFG(0, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 20, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 25, MUX_MODE_4), + TNETV107X_MUX_CFG(4, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(4, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(4, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(4, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 20, MUX_MODE_3), + TNETV107X_MUX_CFG(4, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 25, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 20, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 25, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 20, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 25, MUX_MODE_4), + TNETV107X_MUX_CFG(7, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(7, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(7, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(7, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(7, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(7, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(8, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(8, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(8, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(8, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(8, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(8, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(8, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(9, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(9, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(9, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(9, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 20, MUX_MODE_4), + TNETV107X_MUX_CFG(10, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(11, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(11, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(13, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(13, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(13, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(13, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(15, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(15, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(16, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(16, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(17, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 0, MUX_MODE_3), + TNETV107X_MUX_CFG(17, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(17, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(17, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(17, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(17, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(17, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(18, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(18, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(18, 0, MUX_MODE_3), + TNETV107X_MUX_CFG(18, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(18, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(18, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(18, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(18, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(18, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(18, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(18, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(18, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(19, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(20, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(22, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(22, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(22, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(22, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 20, MUX_MODE_3), + TNETV107X_MUX_CFG(22, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 25, MUX_MODE_3), + TNETV107X_MUX_CFG(23, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(23, 0, MUX_MODE_3), + TNETV107X_MUX_CFG(23, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(23, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(23, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(23, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(24, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(24, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(24, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(25, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 0, MUX_MODE_3), + TNETV107X_MUX_CFG(25, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(25, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(25, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(25, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(25, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(25, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(25, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(26, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(26, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(26, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(26, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 25, MUX_MODE_2), +}; + +const int pin_table_size = sizeof(pin_table) / sizeof(pin_table[0]); + +int mux_select_pin(short index) +{ + const struct pin_config *cfg; + unsigned long mask, mode, reg; + + if (index >= pin_table_size) + return 0; + + cfg = &pin_table[index]; + + mask = 0x1f << cfg->mask_offset; + mode = cfg->mode << cfg->mask_offset; + + reg = __raw_readl(TNETV107X_PINMUX(cfg->reg_index)); + reg = (reg & ~mask) | mode; + __raw_writel(reg, TNETV107X_PINMUX(cfg->reg_index)); + + return 1; +} + +int mux_select_pins(const short *pins) +{ + int i, ret = 1; + + for (i = 0; pins[i] >= 0; i++) + ret &= mux_select_pin(pins[i]); + + return ret; +} diff --git a/arch/arm/cpu/arm1176/tnetv107x/timer.c b/arch/arm/cpu/arm1176/tnetv107x/timer.c new file mode 100644 index 000000000..a7a400d1e --- /dev/null +++ b/arch/arm/cpu/arm1176/tnetv107x/timer.c @@ -0,0 +1,122 @@ +/* + * TNETV107X: Timer implementation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> + +struct timer_regs { + u_int32_t pid12; + u_int32_t pad[3]; + u_int32_t tim12; + u_int32_t tim34; + u_int32_t prd12; + u_int32_t prd34; + u_int32_t tcr; + u_int32_t tgcr; + u_int32_t wdtcr; +}; + +#define regs ((struct timer_regs *)CONFIG_SYS_TIMERBASE) + +#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ) +#define TIM_CLK_DIV 16 + +static ulong timestamp; +static ulong lastinc; + +int timer_init(void) +{ + clk_enable(TNETV107X_LPSC_TIMER0); + + lastinc = timestamp = 0; + + /* We are using timer34 in unchained 32-bit mode, full speed */ + __raw_writel(0x0, ®s->tcr); + __raw_writel(0x0, ®s->tgcr); + __raw_writel(0x06 | ((TIM_CLK_DIV - 1) << 8), ®s->tgcr); + __raw_writel(0x0, ®s->tim34); + __raw_writel(TIMER_LOAD_VAL, ®s->prd34); + __raw_writel(2 << 22, ®s->tcr); + + return 0; +} + +void reset_timer(void) +{ + lastinc = timestamp = 0; + + __raw_writel(0, ®s->tcr); + __raw_writel(0, ®s->tim34); + __raw_writel(2 << 22, ®s->tcr); +} + +static ulong get_timer_raw(void) +{ + ulong now = __raw_readl(®s->tim34); + + if (now >= lastinc) + timestamp += now - lastinc; + else + timestamp += now + TIMER_LOAD_VAL - lastinc; + + lastinc = now; + + return timestamp; +} + +ulong get_timer(ulong base) +{ + return (get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base; +} + +void set_timer(ulong t) +{ + timestamp = t; +} + +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +void __udelay(unsigned long usec) +{ + ulong tmo; + ulong endtime; + signed long diff; + + tmo = CONFIG_SYS_HZ_CLOCK / 1000; + tmo *= usec; + tmo /= (1000 * TIM_CLK_DIV); + + endtime = get_timer_raw() + tmo; + + do { + ulong now = get_timer_raw(); + diff = endtime - now; + } while (diff >= 0); +} + +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/cpu/arm1176/tnetv107x/wdt.c b/arch/arm/cpu/arm1176/tnetv107x/wdt.c new file mode 100644 index 000000000..18aadb0c6 --- /dev/null +++ b/arch/arm/cpu/arm1176/tnetv107x/wdt.c @@ -0,0 +1,180 @@ +/* + * TNETV107X: Watchdog timer implementation (for reset) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> + +#define MAX_DIV 0xFFFE0001 + +struct wdt_regs { + u32 kick_lock; +#define KICK_LOCK_1 0x5555 +#define KICK_LOCK_2 0xaaaa + u32 kick; + + u32 change_lock; +#define CHANGE_LOCK_1 0x6666 +#define CHANGE_LOCK_2 0xbbbb + u32 change; + + u32 disable_lock; +#define DISABLE_LOCK_1 0x7777 +#define DISABLE_LOCK_2 0xcccc +#define DISABLE_LOCK_3 0xdddd + u32 disable; + + u32 prescale_lock; +#define PRESCALE_LOCK_1 0x5a5a +#define PRESCALE_LOCK_2 0xa5a5 + u32 prescale; +}; + +static struct wdt_regs* regs = (struct wdt_regs *)TNETV107X_WDT0_ARM_BASE; + +#define wdt_reg_read(reg) __raw_readl(®s->reg) +#define wdt_reg_write(reg, val) __raw_writel((val), ®s->reg) + +static int write_prescale_reg(unsigned long prescale_value) +{ + wdt_reg_write(prescale_lock, PRESCALE_LOCK_1); + if ((wdt_reg_read(prescale_lock) & 0x3) != 0x1) + return -1; + + wdt_reg_write(prescale_lock, PRESCALE_LOCK_2); + if ((wdt_reg_read(prescale_lock) & 0x3) != 0x3) + return -1; + + wdt_reg_write(prescale, prescale_value); + + return 0; +} + +static int write_change_reg(unsigned long initial_timer_value) +{ + wdt_reg_write(change_lock, CHANGE_LOCK_1); + if ((wdt_reg_read(change_lock) & 0x3) != 0x1) + return -1; + + wdt_reg_write(change_lock, CHANGE_LOCK_2); + if ((wdt_reg_read(change_lock) & 0x3) != 0x3) + return -1; + + wdt_reg_write(change, initial_timer_value); + + return 0; +} + +static int wdt_control(unsigned long disable_value) +{ + wdt_reg_write(disable_lock, DISABLE_LOCK_1); + if ((wdt_reg_read(disable_lock) & 0x3) != 0x1) + return -1; + + wdt_reg_write(disable_lock, DISABLE_LOCK_2); + if ((wdt_reg_read(disable_lock) & 0x3) != 0x2) + return -1; + + wdt_reg_write(disable_lock, DISABLE_LOCK_3); + if ((wdt_reg_read(disable_lock) & 0x3) != 0x3) + return -1; + + wdt_reg_write(disable, disable_value); + return 0; +} + +static int wdt_set_period(unsigned long msec) +{ + unsigned long change_value, count_value; + unsigned long prescale_value = 1; + unsigned long refclk_khz, maxdiv; + int ret; + + refclk_khz = clk_get_rate(TNETV107X_LPSC_WDT_ARM); + maxdiv = (MAX_DIV / refclk_khz); + + if ((!msec) || (msec > maxdiv)) + return -1; + + count_value = refclk_khz * msec; + if (count_value > 0xffff) { + change_value = count_value / 0xffff + 1; + prescale_value = count_value / change_value; + } else { + change_value = count_value; + } + + ret = write_prescale_reg(prescale_value - 1); + if (ret) + return ret; + + ret = write_change_reg(change_value); + if (ret) + return ret; + + return 0; +} + +unsigned long last_wdt = -1; + +int wdt_start(unsigned long msecs) +{ + int ret; + ret = wdt_control(0); + if (ret) + return ret; + ret = wdt_set_period(msecs); + if (ret) + return ret; + ret = wdt_control(1); + if (ret) + return ret; + ret = wdt_kick(); + last_wdt = msecs; + return ret; +} + +int wdt_stop(void) +{ + last_wdt = -1; + return wdt_control(0); +} + +int wdt_kick(void) +{ + wdt_reg_write(kick_lock, KICK_LOCK_1); + if ((wdt_reg_read(kick_lock) & 0x3) != 0x1) + return -1; + + wdt_reg_write(kick_lock, KICK_LOCK_2); + if ((wdt_reg_read(kick_lock) & 0x3) != 0x3) + return -1; + + wdt_reg_write(kick, 1); + return 0; +} + +void reset_cpu(ulong addr) +{ + clk_enable(TNETV107X_LPSC_WDT_ARM); + wdt_start(1); + wdt_kick(); +} diff --git a/arch/arm/cpu/arm_cortexa8/omap3/Makefile b/arch/arm/cpu/arm_cortexa8/omap3/Makefile index 136b163ad..7d63c6bec 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/Makefile +++ b/arch/arm/cpu/arm_cortexa8/omap3/Makefile @@ -37,8 +37,11 @@ COBJS += syslib.o COBJS += sys_info.o COBJS += timer.o +COBJS-$(CONFIG_EMIF4) += emif4.o +COBJS-$(CONFIG_SDRC) += sdrc.o + SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) all: $(obj).depend $(LIB) diff --git a/arch/arm/cpu/arm_cortexa8/omap3/board.c b/arch/arm/cpu/arm_cortexa8/omap3/board.c index 7b78fa448..d2500ca3b 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/board.c +++ b/arch/arm/cpu/arm_cortexa8/omap3/board.c @@ -40,8 +40,6 @@ extern omap3_sysinfo sysinfo; -extern u32 is_mem_sdr(void); - /****************************************************************************** * Routine: delay * Description: spinning delay to use before udelay works @@ -233,7 +231,7 @@ void s_init(void) per_clocks_enable(); if (!in_sdram) - sdrc_init(); + mem_init(); } /****************************************************************************** @@ -274,36 +272,6 @@ void watchdog_init(void) } /****************************************************************************** - * Routine: dram_init - * Description: sets uboots idea of sdram size - *****************************************************************************/ -int dram_init(void) -{ - DECLARE_GLOBAL_DATA_PTR; - unsigned int size0 = 0, size1 = 0; - - /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. - */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) { - do_sdrc_init(CS1, NOT_EARLY); - make_cs1_contiguous(); - } - - size0 = get_sdr_cs_size(CS0); - size1 = get_sdr_cs_size(CS1); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; - - return 0; -} - -/****************************************************************************** * Dummy function to handle errors for EABI incompatibility *****************************************************************************/ void abort(void) diff --git a/arch/arm/cpu/arm_cortexa8/omap3/emif4.c b/arch/arm/cpu/arm_cortexa8/omap3/emif4.c new file mode 100644 index 000000000..fae5b1161 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/emif4.c @@ -0,0 +1,168 @@ +/* + * Author : + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Based on mem.c and sdrc.c + * + * Copyright (C) 2010 + * Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/emif4.h> + +extern omap3_sysinfo sysinfo; + +static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE; + +/* + * is_mem_sdr - + * - Return 1 if mem type in use is SDR + */ +u32 is_mem_sdr(void) +{ + return 0; +} + +/* + * get_sdr_cs_size - + * - Get size of chip select 0/1 + */ +u32 get_sdr_cs_size(u32 cs) +{ + u32 size; + + /* TODO: Calculate the size based on EMIF4 configuration */ + size = CONFIG_SYS_CS0_SIZE; + + return size; +} + +/* + * get_sdr_cs_offset - + * - Get offset of cs from cs0 start + */ +u32 get_sdr_cs_offset(u32 cs) +{ + u32 offset = 0; + + return offset; +} + +/* + * do_emif4_init - + * - Init the emif4 module for DDR access + * - Early init routines, called from flash or SRAM. + */ +void do_emif4_init(void) +{ + unsigned int regval; + /* Set the DDR PHY parameters in PHY ctrl registers */ + regval = (EMIF4_DDR1_READ_LAT | EMIF4_DDR1_PWRDN_DIS | + EMIF4_DDR1_EXT_STRB_DIS); + writel(regval, &emif4_base->ddr_phyctrl1); + writel(regval, &emif4_base->ddr_phyctrl1_shdw); + writel(0, &emif4_base->ddr_phyctrl2); + + /* Reset the DDR PHY and wait till completed */ + regval = readl(&emif4_base->sdram_iodft_tlgc); + regval |= (1<<10); + writel(regval, &emif4_base->sdram_iodft_tlgc); + /*Wait till that bit clears*/ + while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) == 0x1); + /*Re-verify the DDR PHY status*/ + while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0); + + regval |= (1<<0); + writel(regval, &emif4_base->sdram_iodft_tlgc); + /* Set SDR timing registers */ + regval = (EMIF4_TIM1_T_WTR | EMIF4_TIM1_T_RRD | + EMIF4_TIM1_T_RC | EMIF4_TIM1_T_RAS | + EMIF4_TIM1_T_WR | EMIF4_TIM1_T_RCD | + EMIF4_TIM1_T_RP); + writel(regval, &emif4_base->sdram_time1); + writel(regval, &emif4_base->sdram_time1_shdw); + + regval = (EMIF4_TIM2_T_CKE | EMIF4_TIM2_T_RTP | + EMIF4_TIM2_T_XSRD | EMIF4_TIM2_T_XSNR | + EMIF4_TIM2_T_ODT | EMIF4_TIM2_T_XP); + writel(regval, &emif4_base->sdram_time2); + writel(regval, &emif4_base->sdram_time2_shdw); + + regval = (EMIF4_TIM3_T_RAS_MAX | EMIF4_TIM3_T_RFC); + writel(regval, &emif4_base->sdram_time3); + writel(regval, &emif4_base->sdram_time3_shdw); + + /* Set the PWR control register */ + regval = (EMIF4_PWR_PM_TIM | EMIF4_PWR_LP_MODE | + EMIF4_PWR_DPD_DIS | EMIF4_PWR_IDLE_MODE); + writel(regval, &emif4_base->sdram_pwr_mgmt); + writel(regval, &emif4_base->sdram_pwr_mgmt_shdw); + + /* Set the DDR refresh rate control register */ + regval = (EMIF4_REFRESH_RATE | EMIF4_INITREF_DIS); + writel(regval, &emif4_base->sdram_refresh_ctrl); + writel(regval, &emif4_base->sdram_refresh_ctrl_shdw); + + /* set the SDRAM configuration register */ + regval = (EMIF4_CFG_PGSIZE | EMIF4_CFG_EBANK | + EMIF4_CFG_IBANK | EMIF4_CFG_ROWSIZE | + EMIF4_CFG_CL | EMIF4_CFG_NARROW_MD | + EMIF4_CFG_SDR_DRV | EMIF4_CFG_DDR_DIS_DLL | + EMIF4_CFG_DDR2_DDQS | EMIF4_CFG_DDR_TERM | + EMIF4_CFG_IBANK_POS | EMIF4_CFG_SDRAM_TYP); + writel(regval, &emif4_base->sdram_config); +} + +/* + * dram_init - + * - Sets uboots idea of sdram size + */ +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + /* + * If a second bank of DDR is attached to CS1 this is + * where it can be started. Early init code will init + * memory on CS0. + */ + if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) + size1 = get_sdr_cs_size(CS1); + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; + + return 0; +} + +/* + * mem_init() - + * - Initialize memory subsystem + */ +void mem_init(void) +{ + do_emif4_init(); +} diff --git a/arch/arm/cpu/arm_cortexa8/omap3/mem.c b/arch/arm/cpu/arm_cortexa8/omap3/mem.c index dfb7e4c2a..bd914b0ee 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/mem.c +++ b/arch/arm/cpu/arm_cortexa8/omap3/mem.c @@ -79,26 +79,6 @@ static const u32 gpmc_onenand[GPMC_MAX_REG] = { #endif -static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE; - -/************************************************************************** - * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow - * command line mem=xyz use all memory with out discontinuous support - * compiled in. Could do it at the ATAG, but there really is two banks... - * Called as part of 2nd phase DDR init. - **************************************************************************/ -void make_cs1_contiguous(void) -{ - u32 size, a_add_low, a_add_high; - - size = get_sdr_cs_size(CS0); - size >>= 25; /* divide by 32 MiB to find size to offset CS1 */ - a_add_high = (size & 3) << 8; /* set up low field */ - a_add_low = (size & 0x3C) >> 2; /* set up high field */ - writel((a_add_high | a_add_low), &sdrc_base->cs_cfg); - -} - /******************************************************** * mem_ok() - test used to see if timings are correct * for a part. Helps in guessing which part @@ -123,76 +103,6 @@ u32 mem_ok(u32 cs) return 1; } -/******************************************************** - * sdrc_init() - init the sdrc chip selects CS0 and CS1 - * - early init routines, called from flash or - * SRAM. - *******************************************************/ -void sdrc_init(void) -{ - /* only init up first bank here */ - do_sdrc_init(CS0, EARLY_INIT); -} - -/************************************************************************* - * do_sdrc_init(): initialize the SDRAM for use. - * -code sets up SDRAM basic SDRC timings for CS0 - * -optimal settings can be placed here, or redone after i2c - * inspection of board info - * - * - code called once in C-Stack only context for CS0 and a possible 2nd - * time depending on memory configuration from stack+global context - **************************************************************************/ - -void do_sdrc_init(u32 cs, u32 early) -{ - struct sdrc_actim *sdrc_actim_base; - - if(cs) - sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; - else - sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; - - if (early) { - /* reset sdrc controller */ - writel(SOFTRESET, &sdrc_base->sysconfig); - wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status, - 12000000); - writel(0, &sdrc_base->sysconfig); - - /* setup sdrc to ball mux */ - writel(SDRC_SHARING, &sdrc_base->sharing); - - /* Disable Power Down of CKE cuz of 1 CKE on combo part */ - writel(WAKEUPPROC | PWDNEN | SRFRONRESET | PAGEPOLICY_HIGH, - &sdrc_base->power); - - writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); - sdelay(0x20000); - } - - writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY | - RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 | - DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg); - writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl); - writel(V_ACTIMA_165, &sdrc_actim_base->ctrla); - writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb); - - writel(CMD_NOP, &sdrc_base ->cs[cs].manual); - writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - - /* - * CAS latency 3, Write Burst = Read Burst, Serial Mode, - * Burst length = 4 - */ - writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr); - - if (!mem_ok(cs)) - writel(0, &sdrc_base->cs[cs].mcfg); -} - void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, u32 size) { diff --git a/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c b/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c new file mode 100644 index 000000000..96fd990c7 --- /dev/null +++ b/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c @@ -0,0 +1,202 @@ +/* + * Functions related to OMAP3 SDRC. + * + * This file has been created after exctracting and consolidating + * the SDRC related content from mem.c and board.c, also created + * generic init function (mem_init). + * + * Copyright (C) 2004-2010 + * Texas Instruments Incorporated - http://www.ti.com/ + * + * Author : + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Original implementation by (mem.c, board.c) : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * Manikandan Pillai <mani.pillai@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> + +extern omap3_sysinfo sysinfo; + +static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE; + +/* + * is_mem_sdr - + * - Return 1 if mem type in use is SDR + */ +u32 is_mem_sdr(void) +{ + if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR) + return 1; + return 0; +} + +/* + * make_cs1_contiguous - + * - For es2 and above remap cs1 behind cs0 to allow command line + * mem=xyz use all memory with out discontinuous support compiled in. + * Could do it at the ATAG, but there really is two banks... + * - Called as part of 2nd phase DDR init. + */ +void make_cs1_contiguous(void) +{ + u32 size, a_add_low, a_add_high; + + size = get_sdr_cs_size(CS0); + size >>= 25; /* divide by 32 MiB to find size to offset CS1 */ + a_add_high = (size & 3) << 8; /* set up low field */ + a_add_low = (size & 0x3C) >> 2; /* set up high field */ + writel((a_add_high | a_add_low), &sdrc_base->cs_cfg); + +} + + +/* + * get_sdr_cs_size - + * - Get size of chip select 0/1 + */ +u32 get_sdr_cs_size(u32 cs) +{ + u32 size; + + /* get ram size field */ + size = readl(&sdrc_base->cs[cs].mcfg) >> 8; + size &= 0x3FF; /* remove unwanted bits */ + size <<= 21; /* multiply by 2 MiB to find size in MB */ + return size; +} + +/* + * get_sdr_cs_offset - + * - Get offset of cs from cs0 start + */ +u32 get_sdr_cs_offset(u32 cs) +{ + u32 offset; + + if (!cs) + return 0; + + offset = readl(&sdrc_base->cs_cfg); + offset = (offset & 15) << 27 | (offset & 0x30) >> 17; + + return offset; +} + +/* + * do_sdrc_init - + * - Initialize the SDRAM for use. + * - Sets up SDRC timings for CS0 + * - code called once in C-Stack only context for CS0 and a possible 2nd + * time depending on memory configuration from stack+global context + */ +void do_sdrc_init(u32 cs, u32 early) +{ + struct sdrc_actim *sdrc_actim_base; + + if (cs) + sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; + else + sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; + + if (early) { + /* reset sdrc controller */ + writel(SOFTRESET, &sdrc_base->sysconfig); + wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status, + 12000000); + writel(0, &sdrc_base->sysconfig); + + /* setup sdrc to ball mux */ + writel(SDRC_SHARING, &sdrc_base->sharing); + + /* Disable Power Down of CKE cuz of 1 CKE on combo part */ + writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH, + &sdrc_base->power); + + writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); + sdelay(0x20000); + } + + writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY | + RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 | + DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg); + writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl); + writel(V_ACTIMA_165, &sdrc_actim_base->ctrla); + writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb); + + writel(CMD_NOP, &sdrc_base->cs[cs].manual); + writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + + /* + * CAS latency 3, Write Burst = Read Burst, Serial Mode, + * Burst length = 4 + */ + writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr); + + if (!mem_ok(cs)) + writel(0, &sdrc_base->cs[cs].mcfg); +} + +/* + * dram_init - + * - Sets uboots idea of sdram size + */ +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + /* + * If a second bank of DDR is attached to CS1 this is + * where it can be started. Early init code will init + * memory on CS0. + */ + if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) { + do_sdrc_init(CS1, NOT_EARLY); + make_cs1_contiguous(); + + size1 = get_sdr_cs_size(CS1); + } + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; + + return 0; +} + +/* + * mem_init - + * - Init the sdrc chip, + * - Selects CS0 and CS1, + */ +void mem_init(void) +{ + /* only init up first bank here */ + do_sdrc_init(CS0, EARLY_INIT); +} diff --git a/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c b/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c index 08fb32eaa..1df4401d4 100644 --- a/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c +++ b/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c @@ -32,7 +32,6 @@ #include <i2c.h> extern omap3_sysinfo sysinfo; -static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE; static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; static char *rev_s[CPU_3XX_MAX_REV] = { "1.0", @@ -104,46 +103,6 @@ u32 get_cpu_rev(void) } } -/**************************************************** - * is_mem_sdr() - return 1 if mem type in use is SDR - ****************************************************/ -u32 is_mem_sdr(void) -{ - if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR) - return 1; - return 0; -} - -/*********************************************************************** - * get_cs0_size() - get size of chip select 0/1 - ************************************************************************/ -u32 get_sdr_cs_size(u32 cs) -{ - u32 size; - - /* get ram size field */ - size = readl(&sdrc_base->cs[cs].mcfg) >> 8; - size &= 0x3FF; /* remove unwanted bits */ - size <<= 21; /* multiply by 2 MiB to find size in MB */ - return size; -} - -/*********************************************************************** - * get_sdr_cs_offset() - get offset of cs from cs0 start - ************************************************************************/ -u32 get_sdr_cs_offset(u32 cs) -{ - u32 offset; - - if (!cs) - return 0; - - offset = readl(&sdrc_base->cs_cfg); - offset = (offset & 15) << 27 | (offset & 0x30) >> 17; - - return offset; -} - /*************************************************************************** * get_gpmc0_base() - Return current address hardware will be * fetching from. The below effectively gives what is correct, its a bit diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index aa8de3245..c072c27bb 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -215,6 +215,31 @@ struct sdrc { u8 res4[0xC]; struct sdrc_cs cs[2]; /* 0x80 || 0xB0 */ }; + +/* EMIF4 */ +typedef struct emif4 { + unsigned int sdram_sts; + unsigned int sdram_config; + unsigned int res1; + unsigned int sdram_refresh_ctrl; + unsigned int sdram_refresh_ctrl_shdw; + unsigned int sdram_time1; + unsigned int sdram_time1_shdw; + unsigned int sdram_time2; + unsigned int sdram_time2_shdw; + unsigned int sdram_time3; + unsigned int sdram_time3_shdw; + unsigned char res2[8]; + unsigned int sdram_pwr_mgmt; + unsigned int sdram_pwr_mgmt_shdw; + unsigned char res3[32]; + unsigned int sdram_iodft_tlgc; + unsigned char res4[128]; + unsigned int ddr_phyctrl1; + unsigned int ddr_phyctrl1_shdw; + unsigned int ddr_phyctrl2; +} emif4_t; + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ diff --git a/arch/arm/include/asm/arch-omap3/emif4.h b/arch/arm/include/asm/arch-omap3/emif4.h new file mode 100644 index 000000000..579da0ce5 --- /dev/null +++ b/arch/arm/include/asm/arch-omap3/emif4.h @@ -0,0 +1,79 @@ +/* + * Auther: + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Copyright (C) 2010 + * Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _EMIF_H_ +#define _EMIF_H_ + +/* + * Configuration values + */ +#define EMIF4_TIM1_T_RP (0x3 << 25) +#define EMIF4_TIM1_T_RCD (0x3 << 21) +#define EMIF4_TIM1_T_WR (0x3 << 17) +#define EMIF4_TIM1_T_RAS (0x8 << 12) +#define EMIF4_TIM1_T_RC (0xA << 6) +#define EMIF4_TIM1_T_RRD (0x2 << 3) +#define EMIF4_TIM1_T_WTR (0x2) + +#define EMIF4_TIM2_T_XP (0x2 << 28) +#define EMIF4_TIM2_T_ODT (0x0 << 25) +#define EMIF4_TIM2_T_XSNR (0x1C << 16) +#define EMIF4_TIM2_T_XSRD (0xC8 << 6) +#define EMIF4_TIM2_T_RTP (0x1 << 3) +#define EMIF4_TIM2_T_CKE (0x2) + +#define EMIF4_TIM3_T_RFC (0x25 << 4) +#define EMIF4_TIM3_T_RAS_MAX (0x7) + +#define EMIF4_PWR_IDLE_MODE (0x2 << 30) +#define EMIF4_PWR_DPD_DIS (0x0 << 10) +#define EMIF4_PWR_DPD_EN (0x1 << 10) +#define EMIF4_PWR_LP_MODE (0x0 << 8) +#define EMIF4_PWR_PM_TIM (0x0) + +#define EMIF4_INITREF_DIS (0x0 << 31) +#define EMIF4_REFRESH_RATE (0x50F) + +#define EMIF4_CFG_SDRAM_TYP (0x2 << 29) +#define EMIF4_CFG_IBANK_POS (0x0 << 27) +#define EMIF4_CFG_DDR_TERM (0x0 << 24) +#define EMIF4_CFG_DDR2_DDQS (0x1 << 23) +#define EMIF4_CFG_DDR_DIS_DLL (0x0 << 20) +#define EMIF4_CFG_SDR_DRV (0x0 << 18) +#define EMIF4_CFG_NARROW_MD (0x0 << 14) +#define EMIF4_CFG_CL (0x5 << 10) +#define EMIF4_CFG_ROWSIZE (0x0 << 7) +#define EMIF4_CFG_IBANK (0x3 << 4) +#define EMIF4_CFG_EBANK (0x0 << 3) +#define EMIF4_CFG_PGSIZE (0x2) + +/* + * EMIF4 PHY Control 1 register configuration + */ +#define EMIF4_DDR1_EXT_STRB_EN (0x1 << 7) +#define EMIF4_DDR1_EXT_STRB_DIS (0x0 << 7) +#define EMIF4_DDR1_PWRDN_DIS (0x0 << 6) +#define EMIF4_DDR1_PWRDN_EN (0x1 << 6) +#define EMIF4_DDR1_READ_LAT (0x6 << 0) + +#endif /* endif _EMIF_H_ */ diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 9439758e4..a78cf9f59 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -270,4 +270,17 @@ enum { #define PISMO1_ONEN_BASE ONENAND_MAP #define DBG_MPDB_BASE DEBUG_BASE +#ifndef __ASSEMBLY__ + +/* Function prototypes */ +void mem_init(void); + +u32 is_mem_sdr(void); +u32 mem_ok(u32 cs); + +u32 get_sdr_cs_size(u32); +u32 get_sdr_cs_offset(u32); + +#endif /* __ASSEMBLY__ */ + #endif /* endif _MEM_H_ */ diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 34bd515b0..db7b42aed 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -33,6 +33,7 @@ void per_clocks_enable(void); void memif_init(void); void sdrc_init(void); void do_sdrc_init(u32, u32); +void emif4_init(void); void gpmc_init(void); void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, u32 size); @@ -46,8 +47,6 @@ u32 get_sysboot_value(void); u32 is_gpmc_muxed(void); u32 get_gpmc0_type(void); u32 get_gpmc0_width(void); -u32 get_sdr_cs_size(u32); -u32 get_sdr_cs_offset(u32); u32 is_running_in_sdram(void); u32 is_running_in_sram(void); u32 is_running_in_flash(void); diff --git a/arch/arm/include/asm/arch-tnetv107x/clock.h b/arch/arm/include/asm/arch-tnetv107x/clock.h new file mode 100644 index 000000000..097f82594 --- /dev/null +++ b/arch/arm/include/asm/arch-tnetv107x/clock.h @@ -0,0 +1,68 @@ +/* + * TNETV107X: Clock APIs + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H + +#define PSC_MDCTL_NEXT_SWRSTDISABLE 0x0 +#define PSC_MDCTL_NEXT_SYNCRST 0x1 +#define PSC_MDCTL_NEXT_DISABLE 0x2 +#define PSC_MDCTL_NEXT_ENABLE 0x3 + +#define CONFIG_SYS_INT_OSC_FREQ 24000000 + +#ifndef __ASSEMBLY__ + +/* PLL identifiers */ +enum pll_type_e { + SYS_PLL, + TDM_PLL, + ETH_PLL +}; + +/* PLL configuration data */ +struct pll_init_data { + int pll; + int internal_osc; + unsigned long pll_freq; + unsigned long div_freq[10]; +}; + +void init_plls(int num_pll, struct pll_init_data *config); +int lpsc_status(unsigned int mod); +void lpsc_control(int mod, unsigned long state, int lrstz); +unsigned long clk_get_rate(unsigned int clk); +unsigned long clk_round_rate(unsigned int clk, unsigned long hz); +int clk_set_rate(unsigned int clk, unsigned long hz); + +static inline void clk_enable(unsigned int mod) +{ + lpsc_control(mod, PSC_MDCTL_NEXT_ENABLE, -1); +} + +static inline void clk_disable(unsigned int mod) +{ + lpsc_control(mod, PSC_MDCTL_NEXT_DISABLE, -1); +} + +#endif + +#endif diff --git a/arch/arm/include/asm/arch-tnetv107x/emif_defs.h b/arch/arm/include/asm/arch-tnetv107x/emif_defs.h new file mode 100644 index 000000000..9969a018e --- /dev/null +++ b/arch/arm/include/asm/arch-tnetv107x/emif_defs.h @@ -0,0 +1 @@ +#include <asm/arch-davinci/emif_defs.h> diff --git a/arch/arm/include/asm/arch-tnetv107x/hardware.h b/arch/arm/include/asm/arch-tnetv107x/hardware.h new file mode 100644 index 000000000..94a94f9bc --- /dev/null +++ b/arch/arm/include/asm/arch-tnetv107x/hardware.h @@ -0,0 +1,173 @@ +/* + * TNETV107X: Hardware information + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#ifndef __ASSEMBLY__ + +#include <asm/sizes.h> + +#define ASYNC_EMIF_NUM_CS 4 +#define ASYNC_EMIF_MODE_NOR 0 +#define ASYNC_EMIF_MODE_NAND 1 +#define ASYNC_EMIF_MODE_ONENAND 2 +#define ASYNC_EMIF_PRESERVE -1 + +struct async_emif_config { + unsigned mode; + unsigned select_strobe; + unsigned extend_wait; + unsigned wr_setup; + unsigned wr_strobe; + unsigned wr_hold; + unsigned rd_setup; + unsigned rd_strobe; + unsigned rd_hold; + unsigned turn_around; + enum { + ASYNC_EMIF_8 = 0, + ASYNC_EMIF_16 = 1, + ASYNC_EMIF_32 = 2, + } width; +}; + +void init_async_emif(int num_cs, struct async_emif_config *config); + +int wdt_start(unsigned long msecs); +int wdt_stop(void); +int wdt_kick(void); + +#endif + +/* Chip configuration unlock codes and registers */ +#define TNETV107X_KICK0 (TNETV107X_CHIP_CONFIG_SYS_BASE+0x38) +#define TNETV107X_KICK1 (TNETV107X_CHIP_CONFIG_SYS_BASE+0x3c) +#define TNETV107X_PINMUX(n) (TNETV107X_CHIP_CONFIG_SYS_BASE+0x150+(n)*4) +#define TNETV107X_KICK0_MAGIC 0x83e70b13 +#define TNETV107X_KICK1_MAGIC 0x95a4f1e0 + +/* Module base addresses */ +#define TNETV107X_TPCC_BASE 0x01C00000 +#define TNETV107X_TPTC0_BASE 0x01C10000 +#define TNETV107X_TPTC1_BASE 0x01C10400 +#define TNETV107X_INTC_BASE 0x03000000 +#define TNETV107X_LCD_CONTROLLER_BASE 0x08030000 +#define TNETV107X_INTD_BASE 0x08038000 +#define TNETV107X_INTD_IPC_BASE 0x08038000 +#define TNETV107X_INTD_FAST_BASE 0x08039000 +#define TNETV107X_INTD_ASYNC_BASE 0x0803A000 +#define TNETV107X_INTD_SLOW_BASE 0x0803B000 +#define TNETV107X_PKA_BASE 0x08040000 +#define TNETV107X_RNG_BASE 0x08044000 +#define TNETV107X_TIMER0_BASE 0x08086500 +#define TNETV107X_TIMER1_BASE 0x08086600 +#define TNETV107X_WDT0_ARM_BASE 0x08086700 +#define TNETV107X_WDT1_DSP_BASE 0x08086800 +#define TNETV107X_CHIP_CONFIG_SYS_BASE 0x08087000 +#define TNETV107X_GPIO_BASE 0x08088000 +#define TNETV107X_UART1_BASE 0x08088400 +#define TNETV107X_TOUCHSCREEN_BASE 0x08088500 +#define TNETV107X_SDIO0_BASE 0x08088700 +#define TNETV107X_SDIO1_BASE 0x08088800 +#define TNETV107X_MDIO_BASE 0x08088900 +#define TNETV107X_KEYPAD_BASE 0x08088A00 +#define TNETV107X_SSP_BASE 0x08088C00 +#define TNETV107X_CLOCK_CONTROL_BASE 0x0808A000 +#define TNETV107X_PSC_BASE 0x0808B000 +#define TNETV107X_TDM0_BASE 0x08100000 +#define TNETV107X_TDM1_BASE 0x08100100 +#define TNETV107X_MCDMA_BASE 0x08108000 +#define TNETV107X_UART0_DMA_BASE 0x08108200 +#define TNETV107X_USBSS_BASE 0x08120000 +#define TNETV107X_VLYNQ_CONTROL_BASE 0x0810D000 +#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000 +#define TNETV107X_VLYNQ_MEM_MAP_BASE 0x0C000000 +#define TNETV107X_IMCOP_BASE 0x01CC0000 +#define TNETV107X_MBX_LITE_BASE 0x07000000 +#define TNETV107X_ETHSS_BASE 0x0803C000 +#define TNETV107X_CPSW_BASE 0x0803C000 +#define TNETV107X_SPF_BASE 0x0803C800 +#define TNETV107X_IOPU_ETHSS_BASE 0x0803D000 +#define TNETV107X_VTP_CNTRL_0 0x0803D800 +#define TNETV107X_VTP_CNTRL_1 0x0803D900 +#define TNETV107X_UART2_DMA_BASE 0x08108400 +#define TNETV107X_INTERNAL_MEMORY 0x20000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE 0x44000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE 0x48000000 +#define TNETV107X_DDR_EMIF_DATA_BASE 0x80000000 +#define TNETV107X_DDR_EMIF_CONTROL_BASE 0x90000000 + +/* LPSC module definitions */ +#define TNETV107X_LPSC_ARM 0 +#define TNETV107X_LPSC_GEM 1 +#define TNETV107X_LPSC_DDR2_PHY 2 +#define TNETV107X_LPSC_TPCC 3 +#define TNETV107X_LPSC_TPTC0 4 +#define TNETV107X_LPSC_TPTC1 5 +#define TNETV107X_LPSC_RAM 6 +#define TNETV107X_LPSC_MBX_LITE 7 +#define TNETV107X_LPSC_LCD 8 +#define TNETV107X_LPSC_ETHSS 9 +#define TNETV107X_LPSC_AEMIF 10 +#define TNETV107X_LPSC_CHIP_CFG 11 +#define TNETV107X_LPSC_TSC 12 +#define TNETV107X_LPSC_ROM 13 +#define TNETV107X_LPSC_UART2 14 +#define TNETV107X_LPSC_PKTSEC 15 +#define TNETV107X_LPSC_SECCTL 16 +#define TNETV107X_LPSC_KEYMGR 17 +#define TNETV107X_LPSC_KEYPAD 18 +#define TNETV107X_LPSC_GPIO 19 +#define TNETV107X_LPSC_MDIO 20 +#define TNETV107X_LPSC_SDIO0 21 +#define TNETV107X_LPSC_UART0 22 +#define TNETV107X_LPSC_UART1 23 +#define TNETV107X_LPSC_TIMER0 24 +#define TNETV107X_LPSC_TIMER1 25 +#define TNETV107X_LPSC_WDT_ARM 26 +#define TNETV107X_LPSC_WDT_DSP 27 +#define TNETV107X_LPSC_SSP 28 +#define TNETV107X_LPSC_TDM0 29 +#define TNETV107X_LPSC_VLYNQ 30 +#define TNETV107X_LPSC_MCDMA 31 +#define TNETV107X_LPSC_USB0 32 +#define TNETV107X_LPSC_TDM1 33 +#define TNETV107X_LPSC_DEBUGSS 34 +#define TNETV107X_LPSC_ETHSS_RGMII 35 +#define TNETV107X_LPSC_SYSTEM 36 +#define TNETV107X_LPSC_IMCOP 37 +#define TNETV107X_LPSC_SPARE 38 +#define TNETV107X_LPSC_SDIO1 39 +#define TNETV107X_LPSC_USB1 40 +#define TNETV107X_LPSC_USBSS 41 +#define TNETV107X_LPSC_DDR2_EMIF1_VRST 42 +#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST 43 +#define TNETV107X_LPSC_MAX 44 + +/* Interrupt controller */ +#define INTC_GLB_EN (TNETV107X_INTC_BASE + 0x10) +#define INTC_HINT_EN (TNETV107X_INTC_BASE + 0x1500) +#define INTC_EN_CLR0 (TNETV107X_INTC_BASE + 0x380) + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-tnetv107x/mux.h b/arch/arm/include/asm/arch-tnetv107x/mux.h new file mode 100644 index 000000000..f16bc99bc --- /dev/null +++ b/arch/arm/include/asm/arch-tnetv107x/mux.h @@ -0,0 +1,306 @@ +/* + * TNETV107X: Pinmux APIs + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_MUX_H +#define __ASM_ARCH_MUX_H + +struct pin_config { + unsigned char reg_index; + unsigned char mask_offset; + unsigned char mode; +}; + +#define TNETV107X_MUX_CFG(reg, offset, mux_mode) \ + { reg, offset, mux_mode } + +int mux_select_pin(short index); +int mux_select_pins(const short *pins); + +enum tnetv107x_pin_mux_index { + TNETV107X_PIN_ASR_A00, + TNETV107X_PIN_GPIO32, + TNETV107X_PIN_ASR_A01, + TNETV107X_PIN_GPIO33, + TNETV107X_PIN_ASR_A02, + TNETV107X_PIN_GPIO34, + TNETV107X_PIN_ASR_A03, + TNETV107X_PIN_GPIO35, + TNETV107X_PIN_ASR_A04, + TNETV107X_PIN_GPIO36, + TNETV107X_PIN_ASR_A05, + TNETV107X_PIN_GPIO37, + TNETV107X_PIN_ASR_A06, + TNETV107X_PIN_GPIO38, + TNETV107X_PIN_ASR_A07, + TNETV107X_PIN_GPIO39, + TNETV107X_PIN_ASR_A08, + TNETV107X_PIN_GPIO40, + TNETV107X_PIN_ASR_A09, + TNETV107X_PIN_GPIO41, + TNETV107X_PIN_ASR_A10, + TNETV107X_PIN_GPIO42, + TNETV107X_PIN_ASR_A11, + TNETV107X_PIN_BOOT_STRP_0, + TNETV107X_PIN_ASR_A12, + TNETV107X_PIN_BOOT_STRP_1, + TNETV107X_PIN_ASR_A13, + TNETV107X_PIN_GPIO43, + TNETV107X_PIN_ASR_A14, + TNETV107X_PIN_GPIO44, + TNETV107X_PIN_ASR_A15, + TNETV107X_PIN_GPIO45, + TNETV107X_PIN_ASR_A16, + TNETV107X_PIN_GPIO46, + TNETV107X_PIN_ASR_A17, + TNETV107X_PIN_GPIO47, + TNETV107X_PIN_ASR_A18, + TNETV107X_PIN_GPIO48, + TNETV107X_PIN_SDIO1_DATA3_0, + TNETV107X_PIN_ASR_A19, + TNETV107X_PIN_GPIO49, + TNETV107X_PIN_SDIO1_DATA2_0, + TNETV107X_PIN_ASR_A20, + TNETV107X_PIN_GPIO50, + TNETV107X_PIN_SDIO1_DATA1_0, + TNETV107X_PIN_ASR_A21, + TNETV107X_PIN_GPIO51, + TNETV107X_PIN_SDIO1_DATA0_0, + TNETV107X_PIN_ASR_A22, + TNETV107X_PIN_GPIO52, + TNETV107X_PIN_SDIO1_CMD_0, + TNETV107X_PIN_ASR_A23, + TNETV107X_PIN_GPIO53, + TNETV107X_PIN_SDIO1_CLK_0, + TNETV107X_PIN_ASR_BA_1, + TNETV107X_PIN_GPIO54, + TNETV107X_PIN_SYS_PLL_CLK, + TNETV107X_PIN_ASR_CS0, + TNETV107X_PIN_ASR_CS1, + TNETV107X_PIN_ASR_CS2, + TNETV107X_PIN_TDM_PLL_CLK, + TNETV107X_PIN_ASR_CS3, + TNETV107X_PIN_ETH_PHY_CLK, + TNETV107X_PIN_ASR_D00, + TNETV107X_PIN_GPIO55, + TNETV107X_PIN_ASR_D01, + TNETV107X_PIN_GPIO56, + TNETV107X_PIN_ASR_D02, + TNETV107X_PIN_GPIO57, + TNETV107X_PIN_ASR_D03, + TNETV107X_PIN_GPIO58, + TNETV107X_PIN_ASR_D04, + TNETV107X_PIN_GPIO59_0, + TNETV107X_PIN_ASR_D05, + TNETV107X_PIN_GPIO60_0, + TNETV107X_PIN_ASR_D06, + TNETV107X_PIN_GPIO61_0, + TNETV107X_PIN_ASR_D07, + TNETV107X_PIN_GPIO62_0, + TNETV107X_PIN_ASR_D08, + TNETV107X_PIN_GPIO63_0, + TNETV107X_PIN_ASR_D09, + TNETV107X_PIN_GPIO64_0, + TNETV107X_PIN_ASR_D10, + TNETV107X_PIN_SDIO1_DATA3_1, + TNETV107X_PIN_ASR_D11, + TNETV107X_PIN_SDIO1_DATA2_1, + TNETV107X_PIN_ASR_D12, + TNETV107X_PIN_SDIO1_DATA1_1, + TNETV107X_PIN_ASR_D13, + TNETV107X_PIN_SDIO1_DATA0_1, + TNETV107X_PIN_ASR_D14, + TNETV107X_PIN_SDIO1_CMD_1, + TNETV107X_PIN_ASR_D15, + TNETV107X_PIN_SDIO1_CLK_1, + TNETV107X_PIN_ASR_OE, + TNETV107X_PIN_BOOT_STRP_2, + TNETV107X_PIN_ASR_RNW, + TNETV107X_PIN_GPIO29_0, + TNETV107X_PIN_ASR_WAIT, + TNETV107X_PIN_GPIO30_0, + TNETV107X_PIN_ASR_WE, + TNETV107X_PIN_BOOT_STRP_3, + TNETV107X_PIN_ASR_WE_DQM0, + TNETV107X_PIN_GPIO31, + TNETV107X_PIN_LCD_PD17_0, + TNETV107X_PIN_ASR_WE_DQM1, + TNETV107X_PIN_ASR_BA0_0, + TNETV107X_PIN_VLYNQ_CLK, + TNETV107X_PIN_GPIO14, + TNETV107X_PIN_LCD_PD19_0, + TNETV107X_PIN_VLYNQ_RXD0, + TNETV107X_PIN_GPIO15, + TNETV107X_PIN_LCD_PD20_0, + TNETV107X_PIN_VLYNQ_RXD1, + TNETV107X_PIN_GPIO16, + TNETV107X_PIN_LCD_PD21_0, + TNETV107X_PIN_VLYNQ_TXD0, + TNETV107X_PIN_GPIO17, + TNETV107X_PIN_LCD_PD22_0, + TNETV107X_PIN_VLYNQ_TXD1, + TNETV107X_PIN_GPIO18, + TNETV107X_PIN_LCD_PD23_0, + TNETV107X_PIN_SDIO0_CLK, + TNETV107X_PIN_GPIO19, + TNETV107X_PIN_SDIO0_CMD, + TNETV107X_PIN_GPIO20, + TNETV107X_PIN_SDIO0_DATA0, + TNETV107X_PIN_GPIO21, + TNETV107X_PIN_SDIO0_DATA1, + TNETV107X_PIN_GPIO22, + TNETV107X_PIN_SDIO0_DATA2, + TNETV107X_PIN_GPIO23, + TNETV107X_PIN_SDIO0_DATA3, + TNETV107X_PIN_GPIO24, + TNETV107X_PIN_EMU0, + TNETV107X_PIN_EMU1, + TNETV107X_PIN_RTCK, + TNETV107X_PIN_TRST_N, + TNETV107X_PIN_TCK, + TNETV107X_PIN_TDI, + TNETV107X_PIN_TDO, + TNETV107X_PIN_TMS, + TNETV107X_PIN_TDM1_CLK, + TNETV107X_PIN_TDM1_RX, + TNETV107X_PIN_TDM1_TX, + TNETV107X_PIN_TDM1_FS, + TNETV107X_PIN_KEYPAD_R0, + TNETV107X_PIN_KEYPAD_R1, + TNETV107X_PIN_KEYPAD_R2, + TNETV107X_PIN_KEYPAD_R3, + TNETV107X_PIN_KEYPAD_R4, + TNETV107X_PIN_KEYPAD_R5, + TNETV107X_PIN_KEYPAD_R6, + TNETV107X_PIN_GPIO12, + TNETV107X_PIN_KEYPAD_R7, + TNETV107X_PIN_GPIO10, + TNETV107X_PIN_KEYPAD_C0, + TNETV107X_PIN_KEYPAD_C1, + TNETV107X_PIN_KEYPAD_C2, + TNETV107X_PIN_KEYPAD_C3, + TNETV107X_PIN_KEYPAD_C4, + TNETV107X_PIN_KEYPAD_C5, + TNETV107X_PIN_KEYPAD_C6, + TNETV107X_PIN_GPIO13, + TNETV107X_PIN_TEST_CLK_IN, + TNETV107X_PIN_KEYPAD_C7, + TNETV107X_PIN_GPIO11, + TNETV107X_PIN_SSP0_0, + TNETV107X_PIN_SCC_DCLK, + TNETV107X_PIN_LCD_PD20_1, + TNETV107X_PIN_SSP0_1, + TNETV107X_PIN_SCC_CS_N, + TNETV107X_PIN_LCD_PD21_1, + TNETV107X_PIN_SSP0_2, + TNETV107X_PIN_SCC_D, + TNETV107X_PIN_LCD_PD22_1, + TNETV107X_PIN_SSP0_3, + TNETV107X_PIN_SCC_RESETN, + TNETV107X_PIN_LCD_PD23_1, + TNETV107X_PIN_SSP1_0, + TNETV107X_PIN_GPIO25, + TNETV107X_PIN_UART2_CTS, + TNETV107X_PIN_SSP1_1, + TNETV107X_PIN_GPIO26, + TNETV107X_PIN_UART2_RD, + TNETV107X_PIN_SSP1_2, + TNETV107X_PIN_GPIO27, + TNETV107X_PIN_UART2_RTS, + TNETV107X_PIN_SSP1_3, + TNETV107X_PIN_GPIO28, + TNETV107X_PIN_UART2_TD, + TNETV107X_PIN_UART0_CTS, + TNETV107X_PIN_UART0_RD, + TNETV107X_PIN_UART0_RTS, + TNETV107X_PIN_UART0_TD, + TNETV107X_PIN_UART1_RD, + TNETV107X_PIN_UART1_TD, + TNETV107X_PIN_LCD_AC_NCS, + TNETV107X_PIN_LCD_HSYNC_RNW, + TNETV107X_PIN_LCD_VSYNC_A0, + TNETV107X_PIN_LCD_MCLK, + TNETV107X_PIN_LCD_PD16_0, + TNETV107X_PIN_LCD_PCLK_E, + TNETV107X_PIN_LCD_PD00, + TNETV107X_PIN_LCD_PD01, + TNETV107X_PIN_LCD_PD02, + TNETV107X_PIN_LCD_PD03, + TNETV107X_PIN_LCD_PD04, + TNETV107X_PIN_LCD_PD05, + TNETV107X_PIN_LCD_PD06, + TNETV107X_PIN_LCD_PD07, + TNETV107X_PIN_LCD_PD08, + TNETV107X_PIN_GPIO59_1, + TNETV107X_PIN_LCD_PD09, + TNETV107X_PIN_GPIO60_1, + TNETV107X_PIN_LCD_PD10, + TNETV107X_PIN_ASR_BA0_1, + TNETV107X_PIN_GPIO61_1, + TNETV107X_PIN_LCD_PD11, + TNETV107X_PIN_GPIO62_1, + TNETV107X_PIN_LCD_PD12, + TNETV107X_PIN_GPIO63_1, + TNETV107X_PIN_LCD_PD13, + TNETV107X_PIN_GPIO64_1, + TNETV107X_PIN_LCD_PD14, + TNETV107X_PIN_GPIO29_1, + TNETV107X_PIN_LCD_PD15, + TNETV107X_PIN_GPIO30_1, + TNETV107X_PIN_EINT0, + TNETV107X_PIN_GPIO08, + TNETV107X_PIN_EINT1, + TNETV107X_PIN_GPIO09, + TNETV107X_PIN_GPIO00, + TNETV107X_PIN_LCD_PD20_2, + TNETV107X_PIN_TDM_CLK_IN_2, + TNETV107X_PIN_GPIO01, + TNETV107X_PIN_LCD_PD21_2, + TNETV107X_PIN_24M_CLK_OUT_1, + TNETV107X_PIN_GPIO02, + TNETV107X_PIN_LCD_PD22_2, + TNETV107X_PIN_GPIO03, + TNETV107X_PIN_LCD_PD23_2, + TNETV107X_PIN_GPIO04, + TNETV107X_PIN_LCD_PD16_1, + TNETV107X_PIN_USB0_RXERR, + TNETV107X_PIN_GPIO05, + TNETV107X_PIN_LCD_PD17_1, + TNETV107X_PIN_TDM_CLK_IN_1, + TNETV107X_PIN_GPIO06, + TNETV107X_PIN_LCD_PD18, + TNETV107X_PIN_24M_CLK_OUT_2, + TNETV107X_PIN_GPIO07, + TNETV107X_PIN_LCD_PD19_1, + TNETV107X_PIN_USB1_RXERR, + TNETV107X_PIN_ETH_PLL_CLK, + TNETV107X_PIN_MDIO, + TNETV107X_PIN_MDC, + TNETV107X_PIN_AIC_MUTE_STAT_N, + TNETV107X_PIN_TDM0_CLK, + TNETV107X_PIN_AIC_HNS_EN_N, + TNETV107X_PIN_TDM0_FS, + TNETV107X_PIN_AIC_HDS_EN_STAT_N, + TNETV107X_PIN_TDM0_TX, + TNETV107X_PIN_AIC_HNF_EN_STAT_N, + TNETV107X_PIN_TDM0_RX, +}; + +#endif diff --git a/arch/arm/include/asm/arch-tnetv107x/nand_defs.h b/arch/arm/include/asm/arch-tnetv107x/nand_defs.h new file mode 100644 index 000000000..961b710be --- /dev/null +++ b/arch/arm/include/asm/arch-tnetv107x/nand_defs.h @@ -0,0 +1,38 @@ +/* + * TNETV107X: NAND definitions + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef _NAND_DEFS_H_ +#define _NAND_DEFS_H_ + +#include <asm/arch/hardware.h> +#include <asm/arch/emif_defs.h> + +#define DAVINCI_ASYNC_EMIF_CNTRL_BASE TNETV107X_ASYNC_EMIF_CNTRL_BASE + +#define MASK_CLE 0x4000 +#define MASK_ALE 0x2000 + +#define NAND_READ_START 0x00 +#define NAND_READ_END 0x30 +#define NAND_STATUS 0x70 + +extern void davinci_nand_init(struct nand_chip *nand); + +#endif diff --git a/board/logicpd/am3517evm/Makefile b/board/logicpd/am3517evm/Makefile new file mode 100644 index 000000000..3a6b1a11c --- /dev/null +++ b/board/logicpd/am3517evm/Makefile @@ -0,0 +1,46 @@ +# +# Author: Vaibhav Hiremath <hvaibhav@ti.com> +# +# Based on ti/evm/Makefile +# +# Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := am3517evm.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c new file mode 100644 index 000000000..bbb6e834e --- /dev/null +++ b/board/logicpd/am3517evm/am3517evm.c @@ -0,0 +1,76 @@ +/* + * am3517evm.c - board file for TI's AM3517 family of devices. + * + * Author: Vaibhav Hiremath <hvaibhav@ti.com> + * + * Based on ti/evm/evm.c + * + * Copyright (C) 2010 + * Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include <i2c.h> +#include "am3517evm.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_OMAP3517EVM; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/* + * Routine: misc_init_r + * Description: Init i2c, ethernet, etc... (done here so udelay works) + */ +int misc_init_r(void) +{ +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + + dieid_num_r(); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_AM3517EVM(); +} diff --git a/board/logicpd/am3517evm/am3517evm.h b/board/logicpd/am3517evm/am3517evm.h new file mode 100644 index 000000000..3d74ef132 --- /dev/null +++ b/board/logicpd/am3517evm/am3517evm.h @@ -0,0 +1,445 @@ +/* + * am3517evm.h - Header file for the AM3517 EVM. + * + * Author: Vaibhav Hiremath <hvaibhav@ti.com> + * + * Based on ti/evm/evm.h + * + * Copyright (C) 2010 + * Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _AM3517EVM_H_ +#define _AM3517EVM_H_ + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "AM3517EVM Board", + "NAND", +}; +/* AM3517 specific mux configuration */ +#define CONTROL_PADCONF_SYS_NRESWARM 0x0A08 +/* CCDC */ +#define CONTROL_PADCONF_CCDC_PCLK 0x01E4 +#define CONTROL_PADCONF_CCDC_FIELD 0x01E6 +#define CONTROL_PADCONF_CCDC_HD 0x01E8 +#define CONTROL_PADCONF_CCDC_VD 0x01EA +#define CONTROL_PADCONF_CCDC_WEN 0x01EC +#define CONTROL_PADCONF_CCDC_DATA0 0x01EE +#define CONTROL_PADCONF_CCDC_DATA1 0x01F0 +#define CONTROL_PADCONF_CCDC_DATA2 0x01F2 +#define CONTROL_PADCONF_CCDC_DATA3 0x01F4 +#define CONTROL_PADCONF_CCDC_DATA4 0x01F6 +#define CONTROL_PADCONF_CCDC_DATA5 0x01F8 +#define CONTROL_PADCONF_CCDC_DATA6 0x01FA +#define CONTROL_PADCONF_CCDC_DATA7 0x01FC +/* RMII */ +#define CONTROL_PADCONF_RMII_MDIO_DATA 0x01FE +#define CONTROL_PADCONF_RMII_MDIO_CLK 0x0200 +#define CONTROL_PADCONF_RMII_RXD0 0x0202 +#define CONTROL_PADCONF_RMII_RXD1 0x0204 +#define CONTROL_PADCONF_RMII_CRS_DV 0x0206 +#define CONTROL_PADCONF_RMII_RXER 0x0208 +#define CONTROL_PADCONF_RMII_TXD0 0x020A +#define CONTROL_PADCONF_RMII_TXD1 0x020C +#define CONTROL_PADCONF_RMII_TXEN 0x020E +#define CONTROL_PADCONF_RMII_50MHZ_CLK 0x0210 +#define CONTROL_PADCONF_USB0_DRVBUS 0x0212 +/* CAN */ +#define CONTROL_PADCONF_HECC1_TXD 0x0214 +#define CONTROL_PADCONF_HECC1_RXD 0x0216 + +#define CONTROL_PADCONF_SYS_BOOT7 0x0218 +#define CONTROL_PADCONF_SDRC_DQS0N 0x021A +#define CONTROL_PADCONF_SDRC_DQS1N 0x021C +#define CONTROL_PADCONF_SDRC_DQS2N 0x021E +#define CONTROL_PADCONF_SDRC_DQS3N 0x0220 +#define CONTROL_PADCONF_STRBEN_DLY0 0x0222 +#define CONTROL_PADCONF_STRBEN_DLY1 0x0224 +#define CONTROL_PADCONF_SYS_BOOT8 0x0226 + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_AM3517EVM() \ + /* SDRC */\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_CKE0), (M0)) \ + MUX_VAL(CP(SDRC_CKE1), (M0)) \ + /*sdrc_strben_dly0*/\ + MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \ + /*sdrc_strben_dly1*/\ + MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \ + /* GPMC */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ + /* - ETH_nRESET*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) \ + /* DSS */\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \ + /* CAMERA */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + /* - CAM_RESET*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \ + /* MMC */\ + MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \ + /* WriteProtect */\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*CardDetect*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \ + \ + MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0)) \ + /* McBSP */\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\ + /* - LCD_INI*/\ + MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\ + /* - LCD_ENVDD */\ + MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\ + /* - LCD_QVGA/nVGA */\ + MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\ + /* - LCD_RESB */\ + /* UART */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \ + \ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \ + /* I2C */\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \ + /* McSPI */\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\ + MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\ + /* - LAN_INTR*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) \ + \ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M4)) \ + /* CCDC */\ + MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \ + MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \ + MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \ + /* RMII */\ + MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \ + MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \ + MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_RXER), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \ + MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \ + /* HECC */\ + MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \ + /* HSUSB */\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \ + /* HDQ */\ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) \ + /* Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \ + /*SYS_nRESWARM */\ + MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \ + /* - GPIO30 */\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + /* - PEN_IRQ */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ + /* - VIO_1V8*/\ + MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \ + \ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \ + /* JTAG */\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) \ + /* ETK (ES2 onwards) */\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) \ + /* Die to Die */\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \ + +#endif diff --git a/board/logicpd/am3517evm/config.mk b/board/logicpd/am3517evm/config.mk new file mode 100644 index 000000000..f7a35ce1b --- /dev/null +++ b/board/logicpd/am3517evm/config.mk @@ -0,0 +1,30 @@ +# +# Author: Vaibhav Hiremath <hvaibhav@ti.com> +# +# Based on ti/evm/config.mk +# +# Copyright (C) 2010 +# Texas Instruments Incorporated - http://www.ti.com/ +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000 diff --git a/board/ronetix/pm9g45/Makefile b/board/ronetix/pm9g45/Makefile new file mode 100644 index 000000000..dd5b02ecd --- /dev/null +++ b/board/ronetix/pm9g45/Makefile @@ -0,0 +1,54 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian.pop@leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += pm9g45.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ronetix/pm9g45/config.mk b/board/ronetix/pm9g45/config.mk new file mode 100644 index 000000000..7fe9d0313 --- /dev/null +++ b/board/ronetix/pm9g45/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x73f00000 diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c new file mode 100644 index 000000000..3b4d9a345 --- /dev/null +++ b/board/ronetix/pm9g45/pm9g45.c @@ -0,0 +1,188 @@ +/* + * (C) Copyright 2010 + * Ilko Iliev <iliev@ronetix.at> + * Asen Dimov <dimov@ronetix.at> + * Ronetix GmbH <www.ronetix.at> + * + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/sizes.h> +#include <asm/arch/at91sam9g45.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_matrix.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/clk.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Miscelaneous platform dependent initialisations + */ + +#ifdef CONFIG_CMD_NAND +static void pm9g45_nand_hw_init(void) +{ + unsigned long csa; + at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE; + at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + /* Enable CS3 */ + csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A; + writel(csa, &matrix->ccr[6]); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2), + &smc->cs[3].pulse); + + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4), + &smc->cs[3].cycle); + + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(3), + &smc->cs[3].mode); + + writel(1 << AT91SAM9G45_ID_PIOC, &pmc->pcer); + +#ifdef CONFIG_SYS_NAND_READY_PIN + /* Configure RDY/BSY */ + at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); +#endif + + /* Enable NandFlash */ + at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} +#endif + +#ifdef CONFIG_MACB +static void pm9g45_macb_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE; + + /* + * PD2 enables the 50MHz oscillator for Ethernet PHY + * 1 - enable + * 0 - disable + */ + at91_set_pio_output(AT91_PIO_PORTD, 2, 1); + at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */ + + /* Enable clock */ + writel(1 << AT91SAM9G45_ID_EMAC, &pmc->pcer); + + /* + * Disable pull-up on: + * RXDV (PA15) => PHY normal mode (not Test mode) + * ERX0 (PA12) => PHY ADDR0 + * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0); + at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0); + at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0); + + /* Re-enable pull-up */ + at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1); + at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1); + at91_set_pio_pullup(AT91_PIO_PORTA, 13, 1); + + at91_macb_hw_init(); +} +#endif + +int board_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + /* Enable Ctrlc */ + console_init_f(); + + writel((1 << AT91SAM9G45_ID_PIOA) | + (1 << AT91SAM9G45_ID_PIOB) | + (1 << AT91SAM9G45_ID_PIOC) | + (1 << AT91SAM9G45_ID_PIODE), &pmc->pcer); + + /* arch number of AT91SAM9M10G45EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_PM9G45; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + pm9g45_nand_hw_init(); +#endif + +#ifdef CONFIG_MACB + pm9g45_macb_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01); +#endif + return rc; +} diff --git a/board/samsung/goni/Makefile b/board/samsung/goni/Makefile new file mode 100644 index 000000000..9b4c88659 --- /dev/null +++ b/board/samsung/goni/Makefile @@ -0,0 +1,54 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := goni.o onenand.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(SOBJS) $(OBJS) + $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/goni/config.mk b/board/samsung/goni/config.mk new file mode 100644 index 000000000..0e9dd45f2 --- /dev/null +++ b/board/samsung/goni/config.mk @@ -0,0 +1,34 @@ +# +# Copyright (C) 2010 Samsung Electronics +# Kyungmin Park <kyungmin.park@samsung.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# On S5PC100 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x38000000 to 0x40000000 (128MiB) +# +# On S5PC110 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x40000000 to 0x50000000 (256MiB) +# +TEXT_BASE = 0x34800000 diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c new file mode 100644 index 000000000..e512c5908 --- /dev/null +++ b/board/samsung/goni/goni.c @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_GONI; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; + + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + puts("Board:\tGoni\n"); + return 0; +} +#endif diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S new file mode 100644 index 000000000..4b729927f --- /dev/null +++ b/board/samsung/goni/lowlevel_init.S @@ -0,0 +1,585 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/power.h> + +/* + * Register usages: + * + * r5 has zero always + * r7 has S5PC100 GPIO base, 0xE0300000 + * r8 has real GPIO base, 0xE0300000, 0xE0200000 at S5PC100, S5PC110 repectively + * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on + */ + +_TEXT_BASE: + .word TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + mov r11, lr + + /* r5 has always zero */ + mov r5, #0 + + ldr r7, =S5PC100_GPIO_BASE + ldr r8, =S5PC100_GPIO_BASE + /* Read CPU ID */ + ldr r2, =S5PC1XX_PRO_ID + ldr r0, [r2] + mov r1, #0x00010000 + and r0, r0, r1 + cmp r0, r5 + beq 100f + ldr r8, =S5PC110_GPIO_BASE +100: + /* Turn on KEY_LED_ON [GPJ4(1)] XMSMWEN */ + cmp r7, r8 + beq skip_check_didle @ Support C110 only + + ldr r0, =S5PC110_RST_STAT + ldr r1, [r0] + and r1, r1, #0x000D0000 + cmp r1, #(0x1 << 19) @ DEEPIDLE_WAKEUP + beq didle_wakeup + cmp r7, r8 + +skip_check_didle: + addeq r0, r8, #0x280 @ S5PC100_GPIO_J4 + addne r0, r8, #0x2C0 @ S5PC110_GPIO_J4 + ldr r1, [r0, #0x0] @ GPIO_CON_OFFSET + bic r1, r1, #(0xf << 4) @ 1 * 4-bit + orr r1, r1, #(0x1 << 4) + str r1, [r0, #0x0] @ GPIO_CON_OFFSET + + ldr r1, [r0, #0x4] @ GPIO_DAT_OFFSET +#ifdef CONFIG_ONENAND_IPL + orr r1, r1, #(1 << 1) @ 1 * 1-bit +#else + bic r1, r1, #(1 << 1) +#endif + str r1, [r0, #0x4] @ GPIO_DAT_OFFSET + + /* Don't setup at s5pc100 */ + beq 100f + + /* + * Initialize Async Register Setting for EVT1 + * Because we are setting EVT1 as the default value of EVT0, + * setting EVT0 as well does not make things worse. + * Thus, for the simplicity, we set for EVT0, too + * + * The "Async Registers" are: + * 0xE0F0_0000 + * 0xE1F0_0000 + * 0xF180_0000 + * 0xF190_0000 + * 0xF1A0_0000 + * 0xF1B0_0000 + * 0xF1C0_0000 + * 0xF1D0_0000 + * 0xF1E0_0000 + * 0xF1F0_0000 + * 0xFAF0_0000 + */ + ldr r0, =0xe0f00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xe1f00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1800000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1900000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1a00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1b00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1c00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1d00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1e00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1f00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xfaf00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + /* + * Diable ABB block to reduce sleep current at low temperature + * Note that it's hidden register setup don't modify it + */ + ldr r0, =0xE010C300 + ldr r1, =0x00800000 + str r1, [r0] + +100: + /* IO retension release */ + ldreq r0, =S5PC100_OTHERS @ 0xE0108200 + ldrne r0, =S5PC110_OTHERS @ 0xE010E000 + ldr r1, [r0] + ldreq r2, =(1 << 31) @ IO_RET_REL + ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28)) + orr r1, r1, r2 + /* Do not release retention here for S5PC110 */ + streq r1, [r0] + +#ifndef CONFIG_ONENAND_IPL + /* Disable Watchdog */ + ldreq r0, =S5PC100_WATCHDOG_BASE @ 0xEA200000 + ldrne r0, =S5PC110_WATCHDOG_BASE @ 0xE2700000 + str r5, [r0] + + /* setting SRAM */ + ldreq r0, =S5PC100_SROMC_BASE + ldrne r0, =S5PC110_SROMC_BASE + ldr r1, =0x9 + str r1, [r0] +#endif + + /* S5PC100 has 3 groups of interrupt sources */ + ldreq r0, =S5PC100_VIC0_BASE @ 0xE4000000 + ldrne r0, =S5PC110_VIC0_BASE @ 0xF2000000 + add r1, r0, #0x00100000 + add r2, r0, #0x00200000 + + /* Disable all interrupts (VIC0, VIC1 and VIC2) */ + mvn r3, #0x0 + str r3, [r0, #0x14] @ INTENCLEAR + str r3, [r1, #0x14] @ INTENCLEAR + str r3, [r2, #0x14] @ INTENCLEAR + +#ifndef CONFIG_ONENAND_IPL + /* Set all interrupts as IRQ */ + str r5, [r0, #0xc] @ INTSELECT + str r5, [r1, #0xc] @ INTSELECT + str r5, [r2, #0xc] @ INTSELECT + + /* Pending Interrupt Clear */ + str r5, [r0, #0xf00] @ INTADDRESS + str r5, [r1, #0xf00] @ INTADDRESS + str r5, [r2, #0xf00] @ INTADDRESS +#endif + +#ifndef CONFIG_ONENAND_IPL + /* for UART */ + bl uart_asm_init + + bl internal_ram_init +#endif + +#ifdef CONFIG_ONENAND_IPL + /* init system clock */ + bl system_clock_init + + /* OneNAND Sync Read Support at S5PC110 only + * RM[15] : Sync Read + * BRWL[14:12] : 7 CLK + * BL[11:9] : Continuous + * VHF[3] : Very High Frequency Enable (Over 83MHz) + * HF[2] : High Frequency Enable (Over 66MHz) + * WM[1] : Sync Write + */ + cmp r7, r8 + ldrne r1, =0xE006 + ldrne r0, =0xB001E442 + strneh r1, [r0] + + /* + * GCE[26] : Gated Clock Enable + * RPE[17] : Enables Read Prefetch + */ + ldrne r1, =((1 << 26) | (1 << 17) | 0xE006) + ldrne r0, =0xB0600000 + strne r1, [r0, #0x100] @ ONENAND_IF_CTRL + ldrne r1, =0x1212 + strne r1, [r0, #0x108] + + /* Board detection to set proper memory configuration */ + cmp r7, r8 + moveq r9, #1 /* r9 has 1Gib default at s5pc100 */ + movne r9, #2 /* r9 has 2Gib default at s5pc110 */ + + ldr r2, =0xE0200200 + ldr r4, [r2, #0x48] + + bic r1, r4, #(0x3F << 4) /* PULLUP_DISABLE: 3 * 2-bit */ + bic r1, r1, #(0x3 << 2) /* PULLUP_DISABLE: 2 * 2-bit */ + bic r1, r1, #(0x3 << 14) /* PULLUP_DISABLE: 2 * 2-bit */ + str r1, [r2, #0x48] + /* For write completion */ + nop + nop + + ldr r3, [r2, #0x44] + and r1, r3, #(0x7 << 2) + mov r1, r1, lsr #2 + cmp r1, #0x5 + moveq r9, #3 + cmp r1, #0x6 + moveq r9, #1 + cmp r1, #0x7 + moveq r9, #2 + and r0, r3, #(0x1 << 1) + mov r0, r0, lsr #1 + orr r1, r1, r0, lsl #3 + cmp r1, #0x8 + moveq r9, #3 + and r1, r3, #(0x7 << 2) + mov r1, r1, lsr #2 + and r0, r3, #(0x1 << 7) + mov r0, r0, lsr #7 + orr r1, r1, r0, lsl #3 + cmp r1, #0x9 + moveq r9, #3 + str r4, [r2, #0x48] /* Restore PULLUP configuration */ + + bl mem_ctrl_asm_init + + /* Wakeup support. Don't know if it's going to be used, untested. */ + ldreq r0, =S5PC100_RST_STAT + ldrne r0, =S5PC110_RST_STAT + ldr r1, [r0] + biceq r1, r1, #0xfffffff7 + moveq r2, #(1 << 3) + bicne r1, r1, #0xfffeffff + movne r2, #(1 << 16) + cmp r1, r2 + bne 1f +wakeup: + /* turn off L2 cache */ + bl l2_cache_disable + + cmp r7, r8 + ldreq r0, =0xC100 + ldrne r0, =0xC110 + + /* invalidate L2 cache also */ + bl invalidate_dcache + + /* turn on L2 cache */ + bl l2_cache_enable + + cmp r7, r8 + /* Load return address and jump to kernel */ + ldreq r0, =S5PC100_INFORM0 + ldrne r0, =S5PC110_INFORM0 + + /* r1 = physical address of s5pc1xx_cpu_resume function */ + ldr r1, [r0] + + /* Jump to kernel (sleep-s5pc1xx.S) */ + mov pc, r1 + nop + nop +#else + cmp r7, r8 + /* Clear wakeup status register */ + ldreq r0, =S5PC100_WAKEUP_STAT + ldrne r0, =S5PC110_WAKEUP_STAT + ldr r1, [r0] + str r1, [r0] + + /* IO retension release */ + ldreq r0, =S5PC100_OTHERS @ 0xE0108200 + ldrne r0, =S5PC110_OTHERS @ 0xE010E000 + ldr r1, [r0] + ldreq r2, =(1 << 31) @ IO_RET_REL + ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28)) + orr r1, r1, r2 + str r1, [r0] + +#endif + b 1f + +didle_wakeup: + /* Wait when APLL is locked */ + ldr r0, =0xE0100100 @ S5PC110_APLL_CON +lockloop: + ldr r1, [r0] + and r1, r1, #(1 << 29) + cmp r1, #(1 << 29) + bne lockloop + + ldr r0, =S5PC110_INFORM0 + ldr r1, [r0] + mov pc, r1 + nop + nop + nop + nop + nop + +1: + mov lr, r11 + mov pc, lr + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + ldr r0, =S5PC1XX_CLOCK_BASE @ 0xE0100000 + + /* Check S5PC100 */ + cmp r7, r8 + bne 110f +100: + /* Set Lock Time */ + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r0, #0x000] @ S5PC100_APLL_LOCK + str r1, [r0, #0x004] @ S5PC100_MPLL_LOCK + str r1, [r0, #0x008] @ S5PC100_EPLL_LOCK + str r1, [r0, #0x00C] @ S5PC100_HPLL_LOCK + + /* S5P_APLL_CON */ + ldr r1, =0x81bc0400 @ SDIV 0, PDIV 4, MDIV 444 (1333MHz) + str r1, [r0, #0x100] + /* S5P_MPLL_CON */ + ldr r1, =0x80590201 @ SDIV 1, PDIV 2, MDIV 89 (267MHz) + str r1, [r0, #0x104] + /* S5P_EPLL_CON */ + ldr r1, =0x80870303 @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz) + str r1, [r0, #0x108] + /* S5P_HPLL_CON */ + ldr r1, =0x80600603 @ SDIV 3, PDIV 6, MDIV 96 + str r1, [r0, #0x10C] + + ldr r1, [r0, #0x300] + ldr r2, =0x00003fff + bic r1, r1, r2 + ldr r2, =0x00011301 + + orr r1, r1, r2 + str r1, [r0, #0x300] + ldr r1, [r0, #0x304] + ldr r2, =0x00011110 + orr r1, r1, r2 + str r1, [r0, #0x304] + ldr r1, =0x00000001 + str r1, [r0, #0x308] + + /* Set Source Clock */ + ldr r1, =0x00001111 @ A, M, E, HPLL Muxing + str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0 + + b 200f +110: + ldr r0, =0xE010C000 @ S5PC110_PWR_CFG + + /* Set OSC_FREQ value */ + ldr r1, =0xf + str r1, [r0, #0x100] @ S5PC110_OSC_FREQ + + /* Set MTC_STABLE value */ + ldr r1, =0xffffffff + str r1, [r0, #0x110] @ S5PC110_MTC_STABLE + + /* Set CLAMP_STABLE value */ + ldr r1, =0x3ff03ff + str r1, [r0, #0x114] @ S5PC110_CLAMP_STABLE + + ldr r0, =S5PC1XX_CLOCK_BASE @ 0xE0100000 + + /* Set Clock divider */ + ldr r1, =0x14131330 @ 1:1:4:4, 1:4:5 + str r1, [r0, #0x300] + ldr r1, =0x11110111 @ UART[3210]: MMC[3210] + str r1, [r0, #0x310] + + /* Set Lock Time */ + ldr r1, =0x2cf @ Locktime : 30us + str r1, [r0, #0x000] @ S5PC110_APLL_LOCK + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r0, #0x008] @ S5PC110_MPLL_LOCK + str r1, [r0, #0x010] @ S5PC110_EPLL_LOCK + str r1, [r0, #0x020] @ S5PC110_VPLL_LOCK + + /* S5PC110_APLL_CON */ + ldr r1, =0x80C80601 @ 800MHz + str r1, [r0, #0x100] + /* S5PC110_MPLL_CON */ + ldr r1, =0x829B0C01 @ 667MHz + str r1, [r0, #0x108] + /* S5PC110_EPLL_CON */ + ldr r1, =0x80600602 @ 96MHz VSEL 0 P 6 M 96 S 2 + str r1, [r0, #0x110] + /* S5PC110_VPLL_CON */ + ldr r1, =0x806C0603 @ 54MHz + str r1, [r0, #0x120] + + /* Set Source Clock */ + ldr r1, =0x10001111 @ A, M, E, VPLL Muxing + str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0 + + /* OneDRAM(DMC0) clock setting */ + ldr r1, =0x01000000 @ ONEDRAM_SEL[25:24] 1 SCLKMPLL + str r1, [r0, #0x218] @ S5PC110_CLK_SRC6 + ldr r1, =0x30000000 @ ONEDRAM_RATIO[31:28] 3 + 1 + str r1, [r0, #0x318] @ S5PC110_CLK_DIV6 + + /* XCLKOUT = XUSBXTI 24MHz */ + add r2, r0, #0xE000 @ S5PC110_OTHERS + ldr r1, [r2] + orr r1, r1, #(0x3 << 8) @ CLKOUT[9:8] 3 XUSBXTI + str r1, [r2] + + /* CLK_IP0 */ + ldr r1, =0x8fefeeb @ DMC[1:0] PDMA0[3] IMEM[5] + str r1, [r0, #0x460] @ S5PC110_CLK_IP0 + + /* CLK_IP1 */ + ldr r1, =0xe9fdf0f9 @ FIMD[0] USBOTG[16] + @ NANDXL[24] + str r1, [r0, #0x464] @ S5PC110_CLK_IP1 + + /* CLK_IP2 */ + ldr r1, =0xf75f7fc @ CORESIGHT[8] MODEM[9] + @ HOSTIF[10] HSMMC0[16] + @ HSMMC2[18] VIC[27:24] + str r1, [r0, #0x468] @ S5PC110_CLK_IP2 + + /* CLK_IP3 */ + ldr r1, =0x8eff038c @ I2C[8:6] + @ SYSTIMER[16] UART0[17] + @ UART1[18] UART2[19] + @ UART3[20] WDT[22] + @ PWM[23] GPIO[26] SYSCON[27] + str r1, [r0, #0x46c] @ S5PC110_CLK_IP3 + + /* CLK_IP4 */ + ldr r1, =0xfffffff1 @ CHIP_ID[0] TZPC[8:5] + str r1, [r0, #0x470] @ S5PC110_CLK_IP3 + +200: + /* wait at least 200us to stablize all clock */ + mov r2, #0x10000 +1: subs r2, r2, #1 + bne 1b + + mov pc, lr + +#ifndef CONFIG_ONENAND_IPL +internal_ram_init: + ldreq r0, =0xE3800000 + ldrne r0, =0xF1500000 + ldr r1, =0x0 + str r1, [r0] + + mov pc, lr +#endif + +#ifndef CONFIG_ONENAND_IPL +/* + * uart_asm_init: Initialize UART's pins + */ +uart_asm_init: + /* set GPIO to enable UART0-UART4 */ + mov r0, r8 + ldr r1, =0x22222222 + str r1, [r0, #0x0] @ S5PC100_GPIO_A0_OFFSET + ldr r1, =0x00002222 + str r1, [r0, #0x20] @ S5PC100_GPIO_A1_OFFSET + + /* Check S5PC100 */ + cmp r7, r8 + bne 110f + + /* UART_SEL GPK0[5] at S5PC100 */ + add r0, r8, #0x2A0 @ S5PC100_GPIO_K0_OFFSET + ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + bic r1, r1, #(0xf << 20) @ 20 = 5 * 4-bit + orr r1, r1, #(0x1 << 20) @ Output + str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + + ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + bic r1, r1, #(0x3 << 10) @ 10 = 5 * 2-bit + orr r1, r1, #(0x2 << 10) @ Pull-up enabled + str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + + ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET + orr r1, r1, #(1 << 5) @ 5 = 5 * 1-bit + str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET + + b 200f +110: + /* + * Note that the following address + * 0xE020'0360 is reserved address at S5PC100 + */ + /* UART_SEL MP0_5[7] at S5PC110 */ + add r0, r8, #0x360 @ S5PC110_GPIO_MP0_5_OFFSET + ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit + orr r1, r1, #(0x1 << 28) @ Output + str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + + ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + bic r1, r1, #(0x3 << 14) @ 14 = 7 * 2-bit + orr r1, r1, #(0x2 << 14) @ Pull-up enabled + str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + + ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET + orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit + str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET +200: + mov pc, lr +#endif diff --git a/board/samsung/goni/mem_setup.S b/board/samsung/goni/mem_setup.S new file mode 100644 index 000000000..c4d284541 --- /dev/null +++ b/board/samsung/goni/mem_setup.S @@ -0,0 +1,265 @@ +/* + * Copyright (C) 2009 Samsung Electrnoics + * Minkyu Kang <mk7.kang@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + cmp r7, r8 + + ldreq r0, =S5PC100_DMC_BASE @ 0xE6000000 + ldrne r0, =S5PC110_DMC0_BASE @ 0xF0000000 + ldrne r6, =S5PC110_DMC1_BASE @ 0xF1400000 + + /* DLL parameter setting */ + ldr r1, =0x50101000 + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + ldr r1, =0x000000f4 + str r1, [r0, #0x01C] @ PHYCONTROL1_OFFSET + strne r1, [r6, #0x01C] @ PHYCONTROL1_OFFSET + ldreq r1, =0x0 + streq r1, [r0, #0x020] @ PHYCONTROL2_OFFSET + + /* DLL on */ + ldr r1, =0x50101002 + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + + /* DLL start */ + ldr r1, =0x50101003 + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + + mov r2, #0x4000 +wait: subs r2, r2, #0x1 + cmp r2, #0x0 + bne wait + + cmp r7, r8 + /* Force value locking for DLL off */ + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + + /* DLL off */ + ldr r1, =0x50101009 + str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET + strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET + + /* auto refresh off */ + ldr r1, =0xff001010 | (1 << 7) + ldr r2, =0xff001010 | (1 << 7) + str r1, [r0, #0x000] @ CONCONTROL_OFFSET + strne r2, [r6, #0x000] @ CONCONTROL_OFFSET + + /* + * Burst Length 4, 2 chips, 32-bit, LPDDR + * OFF: dynamic self refresh, force precharge, dynamic power down off + */ + ldr r1, =0x00212100 + ldr r2, =0x00212100 + str r1, [r0, #0x004] @ MEMCONTROL_OFFSET + strne r2, [r6, #0x004] @ MEMCONTROL_OFFSET + + /* + * Note: + * If Bank0 has Mobile RAM we place it at 0x3800'0000 (s5pc100 only) + * So finally Bank1 OneDRAM should address start at at 0x3000'0000 + */ + + /* + * DMC0: CS0 : S5PC100/S5PC110 + * 0x30 -> 0x30000000 + * 0xf8 -> 0x37FFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r3, =0x30f80222 + ldr r4, =0x40f00222 +swap_memory: + str r3, [r0, #0x008] @ MEMCONFIG0_OFFSET + str r4, [r0, #0x00C] @ dummy write + + /* + * DMC1: CS0 : S5PC110 + * 0x40 -> 0x40000000 + * 0xf8 -> 0x47FFFFFF (1Gib) + * 0x40 -> 0x40000000 + * 0xf0 -> 0x4FFFFFFF (2Gib) + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits - Col (1Gib) + * [11:8 ] 3: 10 bits - Col (2Gib) + * [ 7:4 ] 2: 14 bits - Row + * [ 3:0 ] 2: 4 banks + */ + /* Default : 2GiB */ + ldr r4, =0x40f01322 @ 2Gib: MCP B + ldr r5, =0x50f81312 @ dummy: MCP D + cmp r9, #1 + ldreq r4, =0x40f81222 @ 1Gib: MCP A + cmp r9, #3 + ldreq r5, =0x50f81312 @ 2Gib + 1Gib: MCP D + cmp r9, #4 + ldreq r5, =0x50f01312 @ 2Gib + 2Gib: MCP E + + cmp r7, r8 + strne r4, [r6, #0x008] @ MEMCONFIG0_OFFSET + strne r5, [r6, #0x00C] @ MEMCONFIG1_OFFSET + + /* + * DMC0: CS1: S5PC100 + * 0x38 -> 0x38000000 + * 0xf8 -> 0x3fFFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + eoreq r3, r3, #0x08000000 + streq r3, [r0, #0xc] @ MEMCONFIG1_OFFSET + + ldr r1, =0x20000000 + str r1, [r0, #0x014] @ PRECHCONFIG_OFFSET + strne r1, [r0, #0x014] @ PRECHCONFIG_OFFSET + strne r1, [r6, #0x014] @ PRECHCONFIG_OFFSET + + /* + * S5PC100: + * DMC: CS0: 166MHz + * CS1: 166MHz + * S5PC110: + * DMC0: CS0: 166MHz + * DMC1: CS0: 200MHz + * + * 7.8us * 200MHz %LE %LONG1560(0x618) + * 7.8us * 166MHz %LE %LONG1294(0x50E) + * 7.8us * 133MHz %LE %LONG1038(0x40E), + * 7.8us * 100MHz %LE %LONG780(0x30C), + */ + ldr r1, =0x0000050E + str r1, [r0, #0x030] @ TIMINGAREF_OFFSET + ldrne r1, =0x00000618 + strne r1, [r6, #0x030] @ TIMINGAREF_OFFSET + + ldr r1, =0x14233287 + str r1, [r0, #0x034] @ TIMINGROW_OFFSET + ldrne r1, =0x182332c8 + strne r1, [r6, #0x034] @ TIMINGROW_OFFSET + + ldr r1, =0x12130005 + str r1, [r0, #0x038] @ TIMINGDATA_OFFSET + ldrne r1, =0x13130005 + strne r1, [r6, #0x038] @ TIMINGDATA_OFFSET + + ldr r1, =0x0E140222 + str r1, [r0, #0x03C] @ TIMINGPOWER_OFFSET + ldrne r1, =0x0E180222 + strne r1, [r6, #0x03C] @ TIMINGPOWER_OFFSET + + /* chip0 Deselect */ + ldr r1, =0x07000000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip0 PALL */ + ldr r1, =0x01000000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip0 REFA */ + ldr r1, =0x05000000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + /* chip0 REFA */ + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip0 MRS */ + ldr r1, =0x00000032 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip0 EMRS */ + ldr r1, =0x00020020 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 Deselect */ + ldr r1, =0x07100000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 PALL */ + ldr r1, =0x01100000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 REFA */ + ldr r1, =0x05100000 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + /* chip1 REFA */ + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 MRS */ + ldr r1, =0x00100032 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* chip1 EMRS */ + ldr r1, =0x00120020 + str r1, [r0, #0x010] @ DIRECTCMD_OFFSET + strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET + + /* auto refresh on */ + ldr r1, =0xFF002030 | (1 << 7) + str r1, [r0, #0x000] @ CONCONTROL_OFFSET + strne r1, [r6, #0x000] @ CONCONTROL_OFFSET + + /* PwrdnConfig */ + ldr r1, =0x00100002 + str r1, [r0, #0x028] @ PWRDNCONFIG_OFFSET + strne r1, [r6, #0x028] @ PWRDNCONFIG_OFFSET + + ldr r1, =0x00212113 + str r1, [r0, #0x004] @ MEMCONTROL_OFFSET + strne r1, [r6, #0x004] @ MEMCONTROL_OFFSET + + /* Skip when S5PC110 */ + bne 1f + + /* Check OneDRAM access area at s5pc100 */ + ldreq r3, =0x38f80222 + ldreq r1, =0x37ffff00 + str r3, [r1] + ldr r2, [r1] + cmp r2, r3 + beq swap_memory +1: + mov pc, lr + + .ltorg diff --git a/board/samsung/goni/onenand.c b/board/samsung/goni/onenand.c new file mode 100644 index 000000000..8d3769b91 --- /dev/null +++ b/board/samsung/goni/onenand.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> +#include <linux/mtd/samsung_onenand.h> +#include <onenand_uboot.h> + +void onenand_board_init(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + + this->base = (void *)CONFIG_SYS_ONENAND_BASE; + this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK; +} diff --git a/board/ti/tnetv107xevm/Makefile b/board/ti/tnetv107xevm/Makefile new file mode 100644 index 000000000..2446c2ae1 --- /dev/null +++ b/board/ti/tnetv107xevm/Makefile @@ -0,0 +1,49 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS += sdb_board.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +.PHONY: all + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ti/tnetv107xevm/config.mk b/board/ti/tnetv107xevm/config.mk new file mode 100644 index 000000000..d24d49a15 --- /dev/null +++ b/board/ti/tnetv107xevm/config.mk @@ -0,0 +1,20 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# + +TEXT_BASE = 0x83FC0000 diff --git a/board/ti/tnetv107xevm/sdb_board.c b/board/ti/tnetv107xevm/sdb_board.c new file mode 100644 index 000000000..3ed1cfd18 --- /dev/null +++ b/board/ti/tnetv107xevm/sdb_board.c @@ -0,0 +1,149 @@ +/* + * TNETV107X-EVM: Board initialization + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <miiphy.h> +#include <linux/mtd/nand.h> +#include <asm/arch/hardware.h> +#include <asm/arch/clock.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/arch/nand_defs.h> +#include <asm/arch/mux.h> + +DECLARE_GLOBAL_DATA_PTR; + +static struct async_emif_config async_emif_config[ASYNC_EMIF_NUM_CS] = { + { /* CS0 */ + .mode = ASYNC_EMIF_MODE_NAND, + .wr_setup = 5, + .wr_strobe = 5, + .wr_hold = 2, + .rd_setup = 5, + .rd_strobe = 5, + .rd_hold = 2, + .turn_around = 5, + .width = ASYNC_EMIF_8, + }, + { /* CS1 */ + .mode = ASYNC_EMIF_MODE_NOR, + .wr_setup = 2, + .wr_strobe = 27, + .wr_hold = 4, + .rd_setup = 2, + .rd_strobe = 27, + .rd_hold = 4, + .turn_around = 2, + .width = ASYNC_EMIF_PRESERVE, + }, + { /* CS2 */ + .mode = ASYNC_EMIF_MODE_NOR, + .wr_setup = 2, + .wr_strobe = 27, + .wr_hold = 4, + .rd_setup = 2, + .rd_strobe = 27, + .rd_hold = 4, + .turn_around = 2, + .width = ASYNC_EMIF_PRESERVE, + }, + { /* CS3 */ + .mode = ASYNC_EMIF_MODE_NOR, + .wr_setup = 1, + .wr_strobe = 90, + .wr_hold = 3, + .rd_setup = 1, + .rd_strobe = 26, + .rd_hold = 3, + .turn_around = 1, + .width = ASYNC_EMIF_8, + }, +}; + +static struct pll_init_data pll_config[] = { + { + .pll = ETH_PLL, + .internal_osc = 1, + .pll_freq = 500000000, + .div_freq = { + 5000000, 50000000, 125000000, 250000000, 25000000, + }, + }, +}; + +static const short sdio1_pins[] = { + TNETV107X_PIN_SDIO1_CLK_1, TNETV107X_PIN_SDIO1_CMD_1, + TNETV107X_PIN_SDIO1_DATA0_1, TNETV107X_PIN_SDIO1_DATA1_1, + TNETV107X_PIN_SDIO1_DATA2_1, TNETV107X_PIN_SDIO1_DATA3_1, + -1 +}; + +static const short uart1_pins[] = { + TNETV107X_PIN_UART1_RD, TNETV107X_PIN_UART1_TD, -1 +}; + +static const short ssp_pins[] = { + TNETV107X_PIN_SSP0_0, TNETV107X_PIN_SSP0_1, TNETV107X_PIN_SSP0_2, + TNETV107X_PIN_SSP1_0, TNETV107X_PIN_SSP1_1, TNETV107X_PIN_SSP1_2, + TNETV107X_PIN_SSP1_3, -1 +}; + +int board_init(void) +{ +#ifndef CONFIG_USE_IRQ + __raw_writel(0, INTC_GLB_EN); /* Global disable */ + __raw_writel(0, INTC_HINT_EN); /* Disable host ints */ + __raw_writel(0, INTC_EN_CLR0 + 0); /* Clear enable */ + __raw_writel(0, INTC_EN_CLR0 + 4); /* Clear enable */ + __raw_writel(0, INTC_EN_CLR0 + 8); /* Clear enable */ +#endif + + gd->bd->bi_arch_number = MACH_TYPE_TNETV107X; + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + init_plls(ARRAY_SIZE(pll_config), pll_config); + + init_async_emif(ARRAY_SIZE(async_emif_config), async_emif_config); + + mux_select_pin(TNETV107X_PIN_ASR_CS3); + mux_select_pins(sdio1_pins); + mux_select_pins(uart1_pins); + mux_select_pins(ssp_pins); + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +#ifdef CONFIG_NAND_DAVINCI +int board_nand_init(struct nand_chip *nand) +{ + davinci_nand_init(nand); + + return 0; +} +#endif diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index 0439477e4..a1bcddcf4 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -96,7 +96,7 @@ void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) value |= PULL_MODE(gpio, mode); break; default: - return; + break; } writel(value, &bank->pull); diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 60ba007aa..08f837b66 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -113,7 +113,8 @@ int spi_claim_bus(struct spi_slave *slave) writel(0, &ds->regs->lvl); /* enable SPI */ - writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1); + writel((readl(&ds->regs->gcr1) | + SPIGCR1_SPIENA_MASK), &ds->regs->gcr1); return 0; } @@ -131,12 +132,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, { struct davinci_spi_slave *ds = to_davinci_spi(slave); unsigned int len, data1_reg_val = readl(&ds->regs->dat1); - int ret, i; + unsigned int i_cnt = 0, o_cnt = 0, buf_reg_val; const u8 *txp = dout; /* dout can be NULL for read operation */ u8 *rxp = din; /* din can be NULL for write operation */ - ret = 0; - if (bitlen == 0) /* Finish any previously submitted transfers */ goto out; @@ -159,41 +158,51 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, readl(&ds->regs->buf); /* keep writing and reading 1 byte until done */ - for (i = 0; i < len; i++) { - /* wait till TXFULL is asserted */ - while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK); - - /* write the data */ - data1_reg_val &= ~0xFFFF; - if (txp) { - data1_reg_val |= *txp; - txp++; + while ((i_cnt < len) || (o_cnt < len)) { + /* read RX buffer and flags */ + buf_reg_val = readl(&ds->regs->buf); + + /* if data is available */ + if ((i_cnt < len) && + (buf_reg_val & SPIBUF_RXEMPTY_MASK) == 0) { + /* + * If there is no read buffer simply + * ignore the read character + */ + if (rxp) + *rxp++ = buf_reg_val & 0xFF; + /* increment read words count */ + i_cnt++; } /* - * Write to DAT1 is required to keep the serial transfer going. - * We just terminate when we reach the end. + * if the tx buffer is empty and there + * is still data to transmit */ - if ((i == (len - 1)) && (flags & SPI_XFER_END)) { - /* clear CS hold */ - writel(data1_reg_val & - ~(1 << SPIDAT1_CSHOLD_SHIFT), &ds->regs->dat1); - } else { - /* enable CS hold */ - data1_reg_val |= ((1 << SPIDAT1_CSHOLD_SHIFT) | + if ((o_cnt < len) && + ((buf_reg_val & SPIBUF_TXFULL_MASK) == 0)) { + /* write the data */ + data1_reg_val &= ~0xFFFF; + if (txp) + data1_reg_val |= *txp++; + /* + * Write to DAT1 is required to keep + * the serial transfer going. + * We just terminate when we reach the end. + */ + if ((o_cnt == (len - 1)) && (flags & SPI_XFER_END)) { + /* clear CS hold */ + writel(data1_reg_val & + ~(1 << SPIDAT1_CSHOLD_SHIFT), + &ds->regs->dat1); + } else { + /* enable CS hold and write TX register */ + data1_reg_val |= ((1 << SPIDAT1_CSHOLD_SHIFT) | (slave->cs << SPIDAT1_CSNR_SHIFT)); - writel(data1_reg_val, &ds->regs->dat1); - } - - /* read the data - wait for data availability */ - while (readl(&ds->regs->buf) & SPIBUF_RXEMPTY_MASK); - - if (rxp) { - *rxp = readl(&ds->regs->buf) & 0xFF; - rxp++; - } else { - /* simply drop the read character */ - readl(&ds->regs->buf); + writel(data1_reg_val, &ds->regs->dat1); + } + /* increment written words count */ + o_cnt++; } } return 0; diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h new file mode 100644 index 000000000..513d005ee --- /dev/null +++ b/include/configs/am3517_evm.h @@ -0,0 +1,296 @@ +/* + * am3517_evm.h - Default configuration for AM3517 EVM board. + * + * Author: Vaibhav Hiremath <hvaibhav@ti.com> + * + * Based on omap3_evm_config.h + * + * Copyright (C) 2010 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */ + +#define CONFIG_EMIF4 /* The chip has EMIF4 controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ +/* + * DDR related + */ +#define CONFIG_OMAP3_MICRON_DDR 1 /* Micron DDR */ +#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 on AM3517 EVM */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +#undef CONFIG_CMD_NET +/* + * Board NAND Info. + */ +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access */ + /* nand at CS0 */ + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ + /* NAND devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 10 + +#define CONFIG_BOOTFILE uImage + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc init; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "AM3517_EVM # " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command */ + /* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ + /* address */ + +/* + * AM3517 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ + /* on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_ENV_IS_IN_NAND 1 +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR boot_flash_env_addr + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#ifndef __ASSEMBLY__ +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 7d1332f62..1076de6fc 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -38,6 +38,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 08d79aca3..e018b217c 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -37,6 +37,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 0d99f7df0..af7c65ad3 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -42,6 +42,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_EVM 1 /* working with EVM */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> @@ -151,7 +153,7 @@ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_ONENAND /* ONENAND support */ +#define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING @@ -306,7 +308,13 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#if defined(CONFIG_CMD_NAND) +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_ENV_IS_IN_NAND +#elif defined(CONFIG_CMD_ONENAND) #define CONFIG_ENV_IS_IN_ONENAND 1 +#endif #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index a43500b5f..b4418319f 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -29,6 +29,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_OVERO 1 /* working with overo */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 945c053ab..9eba003c2 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -32,6 +32,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_PANDORA 1 /* working with pandora */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index b4919db08..d4482d3ae 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -42,6 +42,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index ae7ebf9ea..1e88dc02e 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -38,6 +38,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index c88c732a6..be9daf4fc 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -39,6 +39,8 @@ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */ +#define CONFIG_SDRC /* The chip has SDRC controller */ + #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h new file mode 100644 index 000000000..690f119f4 --- /dev/null +++ b/include/configs/pm9g45.h @@ -0,0 +1,186 @@ +/* + * (C) Copyright 2010 + * Ilko Iliev <iliev@ronetix.at> + * Asen Dimov <dimov@ronetix.at> + * Ronetix GmbH <www.ronetix.at> + * + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the PM9G45 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */ +#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC */ + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_AT91_GPIO 1 +#define CONFIG_ATMEL_USART 1 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +#define CONFIG_SYS_USE_NANDFLASH 1 + +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIO_PORTD, 31 /* this is the user1 led */ +#define CONFIG_GREEN_LED AT91_PIO_PORTD, 0 /* this is the user2 led */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +#define CONFIG_CMD_JFFS2 1 +#define CONFIG_JFFS2_CMDLINE 1 +#define CONFIG_JFFS2_NAND 1 +#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */ +#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */ + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x70000000 +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +/* NOR flash, not available */ +#define CONFIG_SYS_NO_FLASH 1 +#undef CONFIG_CMD_FLASH + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MAX_CHIPS 1 +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 3 + +#endif + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */ +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +/* board specific(not enough SRAM) */ +#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000 + +#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" +#define CONFIG_BOOTARGS "fbcon=rotate:3 console=tty0 " \ + "console=ttyS0,115200 " \ + "root=/dev/mtdblock4 " \ + "mtdparts=atmel_nand:128k(bootstrap)ro," \ + "256k(uboot)ro,1664k(env)," \ + "2M(linux)ro,-(root) rw " \ + "rootfstype=jffs2" + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\ + 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h new file mode 100644 index 000000000..171ec94e7 --- /dev/null +++ b/include/configs/s5p_goni.h @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * + * Configuation settings for the SAMSUNG Universal (s5pc100) board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ +#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */ +#define CONFIG_S5PC110 1 /* which is in a S5PC110 */ +#define CONFIG_MACH_GONI 1 /* working with Goni */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* input clock of PLL: has 24MHz input clock at S5PC110 */ +#define CONFIG_SYS_CLK_FREQ_C110 24000000 + +/* DRAM Base */ +#define CONFIG_SYS_SDRAM_BASE 0x30000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* + * Size of malloc() pool + * 1MB = 0x100000, 0x100000 = 1024 * 1024 + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */ + /* initial data */ +/* + * select serial console configuration + */ +#define CONFIG_SERIAL2 1 /* use SERIAL2 */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_BAUDRATE 115200 + +/* It should define before config_cmd_default.h */ +#define CONFIG_SYS_NO_FLASH 1 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_ONENAND +#define CONFIG_CMD_MTDPARTS + +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ +#define MTDIDS_DEFAULT "onenand0=samsung-onenand" +#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:1m(bootloader)"\ + ",256k(params)"\ + ",2816k(config)"\ + ",8m(csa)"\ + ",7m(kernel)"\ + ",1m(log)"\ + ",12m(modem)"\ + ",60m(qboot)"\ + ",-(UBI)\0" + +#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT + +#define CONFIG_BOOTCOMMAND "run ubifsboot" + +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" + +#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ + " ${console} ${meminfo}" + +#define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}" + +#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \ + " rootfstype=cramfs " CONFIG_COMMON_BOOT + +#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \ + " onenand write 0x32008000 0x0 0x100000\0" + +#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6" + +#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc" + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_UPDATEB \ + "updatek=" \ + "onenand erase 0xc00000 0x600000;" \ + "onenand write 0x31008000 0xc00000 0x600000\0" \ + "updateu=" \ + "onenand erase 0x01560000 0x1eaa0000;" \ + "onenand write 0x32000000 0x1260000 0x8C0000\0" \ + "bootk=" \ + "onenand read 0x30007FC0 0xc00000 0x600000;" \ + "bootm 0x30007FC0\0" \ + "flashboot=" \ + "set bootargs root=/dev/mtdblock${bootblock} " \ + "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \ + "${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \ + "ubifsboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ + CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + CONFIG_COMMON_BOOT "; run bootk\0" \ + "tftpboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ + CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \ + "bootm 0x30007FC0\0" \ + "ramboot=" \ + "set bootargs " CONFIG_RAMDISK_BOOT \ + " initrd=0x33000000,8M ramdisk=8192\0" \ + "mmcboot=" \ + "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \ + CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + CONFIG_COMMON_BOOT "; run bootk\0" \ + "boottrace=setenv opts initcall_debug; run bootcmd\0" \ + "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ + "verify=n\0" \ + "rootfstype=cramfs\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ + "mtdparts=" MTDPARTS_DEFAULT \ + "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \ + "mmcblk=/dev/mmcblk1p1\0" \ + "bootblock=9\0" \ + "ubiblock=8\0" \ + "ubi=enabled\0" \ + "opts=always_resume=1" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Goni # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000) + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Stack sizes */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ + +/* Goni has 3 banks of DRAM, but swap the bank */ +#define CONFIG_NR_DRAM_BANKS 3 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ +#define PHYS_SDRAM_1_SIZE (80 << 20) /* 80 MB in Bank #0 */ +#define PHYS_SDRAM_2 0x40000000 /* mDDR DMC1 Bank #1 */ +#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in Bank #1 */ +#define PHYS_SDRAM_3 0x50000000 /* mDDR DMC2 Bank #2 */ +#define PHYS_SDRAM_3_SIZE (128 << 20) /* 128 MB in Bank #2 */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ + +/* FLASH and environment organization */ +#define CONFIG_ENV_IS_IN_ONENAND 1 +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB, 0x40000 */ +#define CONFIG_ENV_ADDR (1 << 20) /* 1 MB, 0x100000 */ + +#define CONFIG_USE_ONENAND_BOARD_INIT +#define CONFIG_SAMSUNG_ONENAND 1 +#define CONFIG_SYS_ONENAND_BASE 0xB0000000 + +#define CONFIG_DOS_PARTITION 1 + +#endif /* __CONFIG_H */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index f04feae21..624fe04b0 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -40,6 +40,12 @@ #define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ #define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_PERIPORT_REMAP +#define CONFIG_PERIPORT_BASE 0x70000000 +#define CONFIG_PERIPORT_SIZE 0x13 + #define CONFIG_SYS_SDRAM_BASE 0x50000000 /* input clock of PLL: SMDK6400 has 12MHz input clock */ @@ -61,8 +67,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* * Size of malloc() pool */ diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h new file mode 100644 index 000000000..454e9b2f4 --- /dev/null +++ b/include/configs/tnetv107x_evm.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com> + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/sizes.h> +#include <asm/arch/hardware.h> +#include <asm/arch/clock.h> + +/* Architecture, CPU, etc */ +#define CONFIG_ARM1176 +#define CONFIG_TNETV107X +#define CONFIG_TNETV107X_EVM +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_UBOOT_BASE TEXT_BASE +#define CONFIG_DISABLE_TCM +#define CONFIG_PERIPORT_REMAP +#define CONFIG_PERIPORT_BASE 0x2000000 +#define CONFIG_PERIPORT_SIZE 0x10 +#define CONFIG_SYS_CLK_FREQ clk_get_rate(TNETV107X_LPSC_ARM) + +#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0) +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_PLL_SYS_EXT_FREQ 25000000 +#define CONFIG_PLL_TDM_EXT_FREQ 19200000 +#define CONFIG_PLL_ETH_EXT_FREQ 25000000 + +/* Memory Info */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE +#define PHYS_SDRAM_1_SIZE 0x04000000 +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_STACKSIZE (256*1024) + +/* Serial Driver Info */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 TNETV107X_UART1_BASE +#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1) +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Flash and environment info */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_NAND_DAVINCI +#define CONFIG_ENV_SIZE (SZ_128K) +#define CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_NAND_1BIT_ECC +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE +#define CONFIG_SYS_CLE_MASK 0x10 +#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_JFFS2_NAND +#define NAND_MAX_CHIPS 1 +#define CONFIG_ENV_OFFSET 0x180000 +#define DEF_BOOTM "" + +/* + * davinci_nand is a bit of a misnomer since this particular EMIF block is + * commonly used across multiple TI devices. Unfortunately, this misnomer + * (amongst others) carries forward into the kernel too. Consequently, if we + * use a different device name here, the mtdparts variable won't be usable as + * a kernel command-line argument. + */ +#define MTDIDS_DEFAULT "nand0=davinci_nand.0" +#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ + "1536k(uboot)ro," \ + "128k(params)ro," \ + "4m(kernel)," \ + "-(filesystem)" + +/* General U-Boot configuration */ +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_SYS_PROMPT "U-Boot > " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + \ + 0x700000) +#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=32M console=ttyS1,115200n8 " \ + "root=/dev/mmcblk0p1 rw noinitrd" +#define CONFIG_BOOTCOMMAND "" +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EDITENV +#define CONFIG_CMD_IMI +#define CONFIG_CMD_ITEST +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SOURCE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NAND +#define CONFIG_CMD_JFFS2 + +#endif /* __CONFIG_H */ |