mkimage: Add Freescale imx Boot Image support (imximage)

This patch adds support for "imximage" (MX Boot Image)
to the mkimage utility. The imximage is used on the Freescales's
MX.25, MX.35 and MX.51 processors.

Further details under doc/README.imximage.

This patch was tested on a Freescale mx51evk board.

Signed-off-by: Stefano Babic <sbabic@denx.de>

1 files changed, 105 insertions, 0 deletions

diff --git a/tools/imximage.h b/tools/imximage.h
new file mode 100644
index 000000000..c579f513d
--- /dev/null
+++ b/tools/imximage.h
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _IMXIMAGE_H_
+#define _IMXIMAGE_H_
+
+#define MAX_HW_CFG_SIZE 60	/* Max number of registers imx can set */
+#define MAX_EXP_SIZE	4
+#define APP_CODE_BARKER	0xB1
+#define DCD_BARKER	0xB17219E9
+#define HEADER_OFFSET	0x400
+
+
+#define CMD_DATA_STR	"DATA"
+#define FLASH_OFFSET_STANDARD	0x400
+#define FLASH_OFFSET_NAND	FLASH_OFFSET_STANDARD
+#define FLASH_OFFSET_SD		FLASH_OFFSET_STANDARD
+#define FLASH_OFFSET_SPI	FLASH_OFFSET_STANDARD
+#define FLASH_OFFSET_ONENAND	0x100
+
+enum imximage_cmd {
+	CMD_INVALID,
+	CMD_BOOT_FROM,
+	CMD_DATA
+};
+
+enum imximage_fld_types {
+	CFG_INVALID = -1,
+	CFG_COMMAND,
+	CFG_REG_SIZE,
+	CFG_REG_ADDRESS,
+	CFG_REG_VALUE
+};
+
+typedef struct {
+	uint8_t rsa_exponent[MAX_EXP_SIZE];	 /* RSA public exponent */
+	uint8_t *rsa_modulus;			 /* RSA modulus pointer */
+	uint16_t exponent_size;			 /* Exponent size (bytes) */
+	uint16_t modulus_size;			 /* Modulus size (bytes) */
+	uint8_t init_flag;			 /* key initialized */
+} hab_rsa_public_key;
+
+typedef struct {
+	uint32_t type; /* Type of pointer (byte, halfword, word, wait/read) */
+	uint32_t addr; /* Address to write to */
+	uint32_t value; /* Data to write */
+} dcd_type_addr_data_t;
+
+typedef struct {
+	uint32_t barker; /* Barker for sanity check */
+	uint32_t length; /* Device configuration length (without preamble) */
+} dcd_preamble_t;
+
+typedef struct {
+	dcd_preamble_t preamble;
+	dcd_type_addr_data_t addr_data[MAX_HW_CFG_SIZE];
+} dcd_t;
+
+typedef struct {
+	uint32_t app_code_jump_vector;
+	uint32_t app_code_barker;
+	uint32_t app_code_csf;
+	uint32_t dcd_ptr_ptr;
+	hab_rsa_public_key *super_root_key;
+	uint32_t dcd_ptr;
+	uint32_t app_dest_ptr;
+} flash_header_t;
+
+typedef struct {
+	uint32_t length; 	/* Length of data to be read from flash */
+} flash_cfg_parms_t;
+
+struct imx_header {
+	flash_header_t fhdr;
+	dcd_t dcd_table;
+	flash_cfg_parms_t ext_header;
+	uint32_t flash_offset;
+};
+
+struct reg_config {
+	uint32_t raddr;
+	uint32_t rdata;
+};
+
+#endif /* _IMXIMAGE_H_ */