Coding style cleanup

1 files changed, 31 insertions, 31 deletions

diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index 90418e0b7..d83d8e7b4 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -28,11 +28,11 @@
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
-#define CONFIG_YELLOWSTONE			1	/* Board is BAMBOO           */
+#define CONFIG_YELLOWSTONE			1	/* Board is BAMBOO	     */
 #define CONFIG_440_GR				1	/* Specific PPC440GR support */
 
 #define CONFIG_4xx					1	/* ... PPC4xx family	*/
-#define CONFIG_BOARD_EARLY_INIT_F 	1   /* Call board_early_init_f	*/
+#define CONFIG_BOARD_EARLY_INIT_F	1   /* Call board_early_init_f	*/
 #undef	CFG_DRAM_TEST					/* disable - takes long time! */
 #define CONFIG_SYS_CLK_FREQ	66666666    /* external freq to pll	*/
 
@@ -63,14 +63,14 @@
  *----------------------------------------------------------------------*/
 #define CFG_INIT_RAM_ADDR	  0xf0000000		/* DCache */
 #define CFG_INIT_RAM_END	0x2000
-#define CFG_GBL_DATA_SIZE	256		    	/* num bytes initial data	*/
+#define CFG_GBL_DATA_SIZE	256			/* num bytes initial data	*/
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 #define CFG_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
 #define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
-#define CFG_KBYTES_SDRAM	( 128 * 1024)	/* 128MB                     */
-#define CFG_SDRAM_BANKS     (2)
+#define CFG_KBYTES_SDRAM	( 128 * 1024)	/* 128MB		     */
+#define CFG_SDRAM_BANKS	    (2)
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
@@ -92,7 +92,7 @@
  *
  *----------------------------------------------------------------------*/
 #define CFG_NVRAM_SIZE	    (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS1556	1		         /* DS1556 RTC		*/
+#define CONFIG_RTC_DS1556	1			 /* DS1556 RTC		*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
@@ -107,7 +107,7 @@
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#undef CONFIG_SPD_EEPROM               /* Don't use SPD EEPROM for setup    */
+#undef CONFIG_SPD_EEPROM	       /* Don't use SPD EEPROM for setup    */
 
 /*-----------------------------------------------------------------------
  * I2C
@@ -121,7 +121,7 @@
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#undef  CFG_ENV_IS_IN_NVRAM		    /*No NVRAM on board*/
+#undef	CFG_ENV_IS_IN_NVRAM		    /*No NVRAM on board*/
 #undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
 #define CFG_ENV_IS_IN_EEPROM 1
 
@@ -144,7 +144,7 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_MII			1	/* MII PHY management		*/
-#define CONFIG_NET_MULTI    1   /* required for netconsole  */
+#define CONFIG_NET_MULTI    1	/* required for netconsole  */
 #define CONFIG_PHY1_ADDR    3
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
 #define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
@@ -178,48 +178,48 @@
 
 #ifdef CONFIG_440_EP
 	/* Need to define POST */
-#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL	| \
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | \
 			CFG_CMD_DATE	|   \
 			CFG_CMD_DHCP	|   \
 			CFG_CMD_DIAG	|   \
 			CFG_CMD_ECHO	|   \
 			CFG_CMD_EEPROM	|   \
 			CFG_CMD_ELF	|   \
-    /*      CFG_CMD_EXT2    |*/ \
+    /*	    CFG_CMD_EXT2    |*/ \
 	/*		CFG_CMD_FAT		|*/	\
 			CFG_CMD_I2C	|	\
 	/*		CFG_CMD_IDE		|*/	\
 			CFG_CMD_IRQ	|	\
-    /*     	CFG_CMD_KGDB	|*/	\
-            		CFG_CMD_MII     |   \
+    /*		CFG_CMD_KGDB	|*/	\
+			CFG_CMD_MII	|   \
 			CFG_CMD_PCI		|	\
-			CFG_CMD_PING	| 	\
-			CFG_CMD_REGINFO | 	\
+			CFG_CMD_PING	|	\
+			CFG_CMD_REGINFO |	\
 			CFG_CMD_SDRAM	|   \
-			CFG_CMD_FLASH   |   \
+			CFG_CMD_FLASH	|   \
 	/*		CFG_CMD_SPI		|*/	\
 			CFG_CMD_USB	|	\
 			0 ) & ~CFG_CMD_IMLS)
 #else
-#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL	| \
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL | \
 			CFG_CMD_DATE	|   \
 			CFG_CMD_DHCP	|   \
 			CFG_CMD_DIAG	|   \
 			CFG_CMD_ECHO	|   \
 			CFG_CMD_EEPROM	|   \
 			CFG_CMD_ELF	|   \
-    /*      CFG_CMD_EXT2    |*/ \
+    /*	    CFG_CMD_EXT2    |*/ \
 	/*		CFG_CMD_FAT		|*/	\
 			CFG_CMD_I2C	|	\
 	/*		CFG_CMD_IDE		|*/	\
 			CFG_CMD_IRQ	|	\
-    /*     	CFG_CMD_KGDB	|*/	\
-            		CFG_CMD_MII     |   \
+    /*		CFG_CMD_KGDB	|*/	\
+			CFG_CMD_MII	|   \
 			CFG_CMD_PCI		|	\
-			CFG_CMD_PING	| 	\
-			CFG_CMD_REGINFO | 	\
+			CFG_CMD_PING	|	\
+			CFG_CMD_REGINFO |	\
 			CFG_CMD_SDRAM	|   \
-			CFG_CMD_FLASH   |   \
+			CFG_CMD_FLASH	|   \
 	/*		CFG_CMD_SPI		|*/	\
 			0 ) & ~CFG_CMD_IMLS)
 #endif
@@ -246,7 +246,7 @@
 
 #define CFG_LOAD_ADDR		0x100000	/* default load address */
 #define CFG_EXTBDINFO		    1	/* To use extended board_into (bd_t) */
-#define CONFIG_LYNXKDI          1   /* support kdi files */
+#define CONFIG_LYNXKDI		1   /* support kdi files */
 
 #define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
@@ -255,18 +255,18 @@
  *-----------------------------------------------------------------------
  */
 /* General PCI */
-#define CONFIG_PCI			            /* include pci support	        */
-#undef  CONFIG_PCI_PNP			        /* do (not) pci plug-and-play         */
-#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
-#define CFG_PCI_TARGBASE    0x80000000  /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_PCI				    /* include pci support		*/
+#undef	CONFIG_PCI_PNP				/* do (not) pci plug-and-play	      */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
+#define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
 
 /* Board-specific PCI */
-#define CFG_PCI_PRE_INIT                /* enable board pci_pre_init()  */
+#define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
 #define CFG_PCI_TARGET_INIT
 #define CFG_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014  /* IBM */
-#define CFG_PCI_SUBSYS_ID 0xcafe        /* Whatever */
+#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe	/* Whatever */
 
 /*
  * For booting Linux, the board info and command line data