diff options
| author | wdenk <wdenk> | 2003-06-19 23:01:32 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2003-06-19 23:01:32 +0000 |
| commit | 48b42616e928ce6eacfe20276a1614e2b27ac4b5 (patch) | |
| tree | 0c194fbd1059185f158c0b37dc3c846b50c2ee2f /board/smdk2400 | |
| parent | 15ef8a5d17181ea376fac94579dce0af1cfcdeb7 (diff) | |
* Patches by David Müller, 12 Jun 2003:
- rewrite of the S3C24X0 register definitions stuff
- "driver" for the built-in S3C24X0 RTC
* Patches by Yuli Barcohen, 12 Jun 2003:
- Add MII support and Ethernet PHY initialization for MPC8260ADS board
- Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
configuration word supplied by FPGA on some MPC8260ADS boards
* Patch by Pantelis Antoniou, 10 Jun 2003:
Unify status LED interface
Diffstat (limited to 'board/smdk2400')
| -rw-r--r-- | board/smdk2400/smdk2400.c | 30 |
1 files changed, 16 insertions, 14 deletions
diff --git a/board/smdk2400/smdk2400.c b/board/smdk2400/smdk2400.c index 2b61b2d8e..2d6be31be 100644 --- a/board/smdk2400/smdk2400.c +++ b/board/smdk2400/smdk2400.c @@ -46,33 +46,35 @@ extern int do_mdm_init; /* defined in common/main.c */ int board_init (void) { DECLARE_GLOBAL_DATA_PTR; + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); /* memory and cpu-speed are setup before relocation */ /* change the clock to be 50 MHz 1:1:1 */ - rMPLLCON = 0x5c042; - rCLKDIVN = 0; + clk_power->MPLLCON = 0x5c042; + clk_power->CLKDIVN = 0; /* set up the I/O ports */ - rPACON = 0x3ffff; - rPBCON = 0xaaaaaaaa; - rPBUP = 0xffff; - rPECON = 0x0; - rPEUP = 0x0; + gpio->PACON = 0x3ffff; + gpio->PBCON = 0xaaaaaaaa; + gpio->PBUP = 0xffff; + gpio->PECON = 0x0; + gpio->PEUP = 0x0; #ifdef CONFIG_HWFLOW /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */ /* 10, 10, 00, 00, 10, 00, 10 */ - rPFCON=0xa22; + gpio->PFCON=0xa22; /* Disable pull-up on Rx, Tx, CTS and RTS pins */ - rPFUP=0x35; + gpio->PFUP=0x35; #else /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */ /* 00, 00, 00, 00, 10, 00, 10 */ - rPFCON = 0x22; + gpio->PFCON = 0x22; /* Disable pull-up on Rx and Tx pins */ - rPFUP = 0x5; + gpio->PFUP = 0x5; #endif /* CONFIG_HWFLOW */ - rPGCON = 0x0; - rPGUP = 0x0; - rOPENCR = 0x0; + gpio->PGCON = 0x0; + gpio->PGUP = 0x0; + gpio->OPENCR = 0x0; /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */ gd->bd->bi_arch_number = 145; |