diff options
| author | wdenk <wdenk> | 2004-12-31 09:32:47 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2004-12-31 09:32:47 +0000 |
| commit | e2ffd59b4d93c9149de1caaa087371b0cfc512c9 (patch) | |
| tree | 86cfb6e30bec1686253b0542d76f57c5d62d183a /board/cpc45/cpc45.c | |
| parent | 400ab719c6025c176c50bcdff342384222d7424b (diff) | |
* Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
additional ethernet addresses.
* Cleanup drivers/i82365.c - avoid duplication of code
* Fix bogus "cannot span across banks" flash error message
* Add support for CompactFlash for the CPC45 Board.
Diffstat (limited to 'board/cpc45/cpc45.c')
| -rw-r--r-- | board/cpc45/cpc45.c | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c index 92ccd42e7..51b008591 100644 --- a/board/cpc45/cpc45.c +++ b/board/cpc45/cpc45.c @@ -24,11 +24,13 @@ #include <common.h> #include <mpc824x.h> #include <asm/processor.h> +#include <asm/io.h> #include <pci.h> #include <i2c.h> int sysControlDisplay(int digit, uchar ascii_code); extern void Plx9030Init(void); +extern void SPD67290Init(void); /* We have to clear the initial data area here. Couldn't have done it * earlier because DRAM had not been initialized. @@ -180,6 +182,10 @@ static struct pci_config_table pci_cpc45_config_table[] = { pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR, PCI_PLX9030_MEMADDR, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0E, PCI_ANY_ID, + pci_cfgfunc_config_device, { PCMCIA_IO_BASE, + PCMCIA_IO_BASE, + PCI_COMMAND_MEMORY | PCI_COMMAND_IO }}, #endif /*CONFIG_PCI_PNP*/ { } }; @@ -233,3 +239,37 @@ int sysControlDisplay (int digit, /* number of digit 0..7 */ return (0); } + +#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) + +#ifdef CFG_PCMCIA_MEM_ADDR +volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR; +#endif + +int pcmcia_init(void) +{ + u_int rc; + + debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n"); + + rc = i82365_init(); + + return rc; +} + +#endif /* CFG_CMD_PCMCIA */ + +# ifdef CONFIG_IDE_LED +void ide_led (uchar led, uchar status) +{ + u_char val; + /* We have one PCMCIA slot and use LED H4 for the IDE Interface */ + val = readb(BCSR_BASE + 0x04); + if (status) { /* led on */ + val |= B_CTRL_LED0; + } else { + val &= ~B_CTRL_LED0; + } + writeb(val, BCSR_BASE + 0x04); +} +# endif |