* Patches by Jon Diekema, 15 Sep 2003:

  - add description for missing CFG_CMD_* entries in the README file
  - sacsng tweaks:
   include/configs/sacsng.h:
       + Support extra bootp options like: 2nd DNS and send hostname
       + Enabling ping and irq command
       + Adding defines for a bunch of misc configrabled options
         (patches for these options will be coming)
       + Adding watchdog support, but it isn't enabled yet.

   board/sacsng/sacsng.c:

       + Suppressing unneeded output when the quiet environment
	 is non-zero.
       + show_boot_progress() now accepts any negative number as a
	 failure code.
       + show_boot_progress() flashes the error code 5 times, and
         then resets the board to retry the boot from the top

* Patch by Gleb Natapov, 14 Sep 2003:
  enable watchdog support for all MPC824x boards that have a watchdog

4 files changed, 168 insertions, 24 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 93e7c7f83..0d7c5d7af 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
 Changes for U-Boot 1.0.0:
 ======================================================================
 
+* Patches by Jon Diekema, 15 Sep 2003:
+  - add description for missing CFG_CMD_* entries in the README file
+  - sacsng tweaks
+
 * Patch by Gleb Natapov, 14 Sep 2003:
   enable watchdog support for all MPC824x boards that have a watchdog
 
diff --git a/README b/README
index e431c29a7..691140f53 100644
--- a/README
+++ b/README
@@ -573,13 +573,18 @@ The following options need to be configured:
 		#define enables commands:
 		-------------------------
 		CFG_CMD_ASKENV	* ask for env variable
+		CFG_CMD_AUTOSCRIPT Autoscript Support
 		CFG_CMD_BDI	  bdinfo
 		CFG_CMD_BEDBUG	  Include BedBug Debugger
+		CFG_CMD_BMP     * BMP support
 		CFG_CMD_BOOTD	  bootd
 		CFG_CMD_CACHE	  icache, dcache
 		CFG_CMD_CONSOLE	  coninfo
 		CFG_CMD_DATE	* support for RTC, date/time...
 		CFG_CMD_DHCP	  DHCP support
+		CFG_CMD_DIAG    * Diagnostics
+		CFG_CMD_DOC     * Disk-On-Chip Support
+		CFG_CMD_DTT       Digital Therm and Thermostat 
 		CFG_CMD_ECHO	* echo arguments
 		CFG_CMD_EEPROM	* EEPROM read/write support
 		CFG_CMD_ELF	  bootelf, bootvx
@@ -589,27 +594,37 @@ The following options need to be configured:
 		CFG_CMD_FDOS	* Dos diskette Support
 		CFG_CMD_FLASH	  flinfo, erase, protect
 		CFG_CMD_FPGA	  FPGA device initialization support
+		CFG_CMD_HWFLOW  * RTS/CTS hw flow control
 		CFG_CMD_I2C	* I2C serial bus support
 		CFG_CMD_IDE	* IDE harddisk support
 		CFG_CMD_IMI	  iminfo
+		CFG_CMD_IMLS      List all found images
 		CFG_CMD_IMMAP	* IMMR dump support
 		CFG_CMD_IRQ	* irqinfo
+		CFG_CMD_JFFS2   * JFFS2 Support
 		CFG_CMD_KGDB	* kgdb
 		CFG_CMD_LOADB	  loadb
 		CFG_CMD_LOADS	  loads
 		CFG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
 				  loop, mtest
+		CFG_CMD_MISC      Misc functions like sleep etc
 		CFG_CMD_MMC	  MMC memory mapped support
 		CFG_CMD_MII	  MII utility commands
+		CFG_CMD_NAND    * NAND support
 		CFG_CMD_NET	  bootp, tftpboot, rarpboot
 		CFG_CMD_PCI	* pciinfo
 		CFG_CMD_PCMCIA	* PCMCIA support
+		CFG_CMD_PING    * send ICMP ECHO_REQUEST to network host
+		CFG_CMD_PORTIO    Port I/O
 		CFG_CMD_REGINFO * Register dump
 		CFG_CMD_RUN	  run command in env variable
+		CFG_CMD_SAVES     save S record dump
 		CFG_CMD_SCSI	* SCSI Support
+		CFG_CMD_SDRAM   * print SDRAM configuration information
 		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
 		CFG_CMD_SPI	* SPI serial bus support
 		CFG_CMD_USB	* USB support
+		CFG_CMD_VFD     * VFD support (TRAB)
 		CFG_CMD_BSP	* Board SPecific functions
 		-----------------------------------------------
 		CFG_CMD_ALL	all
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
index eb7e416df..60563d4ab 100644
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@@ -28,11 +28,18 @@
 #include <mpc8260.h>
 #include <i2c.h>
 #include <spi.h>
+#include <command.h>
 
 #ifdef CONFIG_SHOW_BOOT_PROGRESS
 #include <status_led.h>
 #endif
 
+#ifdef CONFIG_ETHER_LOOPBACK_TEST
+extern void eth_loopback_test(void);
+#endif /* CONFIG_ETHER_LOOPBACK_TEST */
+
+extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
 #include "clkinit.h"
 #include "ioconfig.h" /* I/O configuration table */
 
@@ -243,15 +250,15 @@ long int initdram(int board_type)
 
     /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
     if(caslatency < 2) {
-	printf("CL was %d, forcing to 2\n", caslatency);
+	printf("WARNING: CL was %d, forcing to 2\n", caslatency);
 	caslatency = 2;
     }
     if(rows > 14) {
-	printf("This doesn't look good, rows = %d, should be <= 14\n", rows);
+	printf("WARNING: This doesn't look good, rows = %d, should be <= 14\n", rows);
 	rows = 14;
     }
     if(cols > 11) {
-	printf("This doesn't look good, columns = %d, should be <= 11\n", cols);
+	printf("WARNING: This doesn't look good, columns = %d, should be <= 11\n", cols);
 	cols = 11;
     }
 
@@ -450,6 +457,15 @@ int misc_init_r(void)
     int  sample_128x;  /* Use 128/4 clocking for the ADC/DAC */
     int  right_just;   /* Is the data to the DAC right justified? */
     int  mclk_divide;  /* MCLK Divide */
+    int  quiet;        /* Quiet or minimal output mode */
+
+    quiet = 0;
+    if ((ep = getenv("quiet")) != NULL) {
+	quiet = simple_strtol(ep, NULL, 10);
+    }
+    else {
+	setenv("quiet", "0");
+    }
 
     /*
      * SACSng custom initialization:
@@ -517,8 +533,12 @@ int misc_init_r(void)
 	setenv("Daq128xSampling", "1");
     }
 
-    /* Display the ADC/DAC clocking information */
-    Daq_Display_Clocks();
+    /* 
+     * Display the ADC/DAC clocking information 
+     */
+    if (!quiet) {
+        Daq_Display_Clocks();
+    }
 
     /*
      * Determine the DAC data justification
@@ -552,8 +572,10 @@ int misc_init_r(void)
      * 3) Write the I2C address to register 6
      * 4) Enable address matching by setting the MSB in register 7
      */
-
-    printf("Initializing the ADC...\n");
+    
+    if (!quiet) {
+        printf("Initializing the ADC...\n");
+    }
     udelay(ADC_INITIAL_DELAY);		/* 10uSec per uF of VREF cap */
 
     iopa->pdat &= ~ADC_SDATA1_MASK;     /* release SDATA1 */
@@ -615,7 +637,9 @@ int misc_init_r(void)
      * sending an I2C "start" sequence.  When we bring the I2C back to
      * the normal state, we send an I2C "stop" sequence.
      */
-    printf("Initializing the DAC...\n");
+    if (!quiet) {
+	printf("Initializing the DAC...\n");
+    }
 
     /*
      * Bring the I2C clock and data lines low for initialization
@@ -695,7 +719,16 @@ int misc_init_r(void)
     I2C_DELAY;
     I2C_TRISTATE;
 
-    printf("\n");
+    if (!quiet) {
+        printf("\n");
+    }
+
+#ifdef CONFIG_ETHER_LOOPBACK_TEST
+    /*
+     * Run the Ethernet loopback test
+     */
+    eth_loopback_test ();
+#endif /* CONFIG_ETHER_LOOPBACK_TEST */
 
 #ifdef CONFIG_SHOW_BOOT_PROGRESS
     /*
@@ -758,17 +791,44 @@ static int last_boot_progress;
 
 void show_boot_progress (int status)
 {
-    if(status != -1) {
+    int i,j;
+    if(status > 0) {
 	last_boot_progress = status;
     } else {
+        /* 
+	 * If a specific failure code is given, flash this code
+	 * else just use the last success code we've seen
+	 */
+	if(status < -1)
+	    last_boot_progress = -status;
+	
+	/* 
+	 * Flash this code 5 times
+	 */
+	for(j=0; j<5; j++) {
+	    /*
+	     * Houston, we have a problem.
+	     * Blink the last OK status which indicates where things failed.
+	     */
+	    status_led_set(STATUS_LED_RED, STATUS_LED_ON);
+	    flash_code(last_boot_progress, 5, 3);
+
+	    /* 
+	     * Delay 5 seconds between repetitions, 
+	     * with the fault LED blinking 
+	     */
+	    for(i=0; i<5; i++) {
+	    	status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
+	    	udelay(500000);
+	    	status_led_set(STATUS_LED_RED, STATUS_LED_ON);
+	    	udelay(500000);
+	    }
+	}
+
 	/*
-	 * Houston, we have a problem.  Blink the last OK status which
-	 * indicates where things failed.
+	 * Reset the board to retry initialization.
 	 */
-	status_led_set(STATUS_LED_RED, STATUS_LED_ON);
-	flash_code(last_boot_progress, 5, 3);
-	udelay(1000000);
-	status_led_set(STATUS_LED_RED, STATUS_LED_BLINKING);
+	do_reset (NULL, 0, 0, NULL);
     }
 }
 #endif /* CONFIG_SHOW_BOOT_PROGRESS */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 6fd8abc9c..cc4936677 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -35,10 +35,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* Enable debug prints */
 #undef DEBUG		      /* General debug */
 #undef DEBUG_BOOTP_EXT	      /* Debug received vendor fields */
 
+#undef CONFIG_LOGBUFFER       /* External logbuffer support */
+
 /*****************************************************************************
  *
  * These settings must match the way _your_ board is set up
@@ -172,6 +173,7 @@
 
 #ifdef	CONFIG_ETHER_ON_FCC
 #define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */
+#undef  CONFIG_ETHER_LOOPBACK_TEST      /* Ethernet external loopback test */
 #define CONFIG_MII			/* MII PHY management		*/
 #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
 /*
@@ -318,10 +320,12 @@
  * will be part of the default enviroment compiled into the boot image.
  */
 #define CONFIG_EXTRA_ENV_SETTINGS \
-"serverip=192.168.123.201\0" \
+"quiet=0\0" \
+"serverip=192.168.123.205\0" \
 "ipaddr=192.168.123.203\0" \
 "checkhostname=VR8500\0" \
 "reprog="\
+    "bootp; " \
     "tftpboot 0x140000 /bdi2000/u-boot.bin; " \
     "protect off 60000000 6003FFFF; " \
     "erase 60000000 6003FFFF; " \
@@ -405,7 +409,7 @@
 "adc-12=echo ### ADC-12 ; imd.b e 81 e\0" \
 "adc-34=echo ### ADC-34 ; imd.b f 81 e\0" \
 "dac=echo ### DAC ; imd.b 11 81 5\0" \
-"boot-hook=run ana\0"
+"boot-hook=echo\0"
 
 /* What should the console's baud rate be? */
 #define CONFIG_BAUDRATE		9600
@@ -466,15 +470,16 @@
 
 #define CONFIG_BOOTP_RANDOM_DELAY       /* Randomize the BOOTP retry delay */
 
-#define CONFIG_BOOTP_RETRY_COUNT 0x40000000 /* # of timeouts before giving up */
-
 /* Add support for a few extra bootp options like:
  *	- File size
- *	- DNS
+ *	- DNS (up to 2 servers)
+ *      - Send hostname to DHCP server 
  */
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
 				 CONFIG_BOOTP_BOOTFILESIZE | \
-				 CONFIG_BOOTP_DNS)
+				 CONFIG_BOOTP_DNS | \
+                                 CONFIG_BOOTP_DNS2 | \
+                                 CONFIG_BOOTP_SEND_HOSTNAME)
 
 /* undef this to save memory */
 #define CFG_LONGHELP
@@ -492,6 +497,11 @@
  */
 #define CONFIG_TIMESTAMP
 
+/* If this variable is defined, an environment variable named "ver" 
+ * is created by U-Boot showing the U-Boot version.
+ */
+#define CONFIG_VERSION_VARIABLE
+
 /* What U-Boot subsytems do you want enabled? */
 #ifdef CONFIG_ETHER_ON_FCC
 # define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
@@ -503,6 +513,8 @@
 				CFG_CMD_SDRAM   | \
 				CFG_CMD_REGINFO | \
 				CFG_CMD_IMMAP	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_PING	| \
 				CFG_CMD_MII	)
 #else
 # define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
@@ -513,12 +525,16 @@
 				CFG_CMD_SPI	| \
 				CFG_CMD_SDRAM   | \
 				CFG_CMD_REGINFO | \
-				CFG_CMD_IMMAP	)
+				CFG_CMD_IMMAP	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_PING	)
 #endif /* CONFIG_ETHER_ON_FCC */
 
 /* Where do the internal registers live? */
 #define CFG_IMMR		0xF0000000
 
+#undef	CONFIG_WATCHDOG			/* disable the watchdog */
+
 /*****************************************************************************
  *
  * You should not have to modify any of the following settings
@@ -532,9 +548,48 @@
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
+
 /*
  * Miscellaneous configurable options
  */
+#define CFG_BOOTM_HEADER_QUIET 1        /* Suppress the image header dump    */
+                                        /* in the bootm command.             */
+#define CFG_BOOTM_PROGESS_QUIET 1       /* Suppress the progress displays,   */
+                                        /* "## <message>" from the bootm cmd */
+#define CFG_BOOTP_CHECK_HOSTNAME 1      /* If checkhostname environment is   */
+                                        /* defined, then the hostname param  */
+                                        /* validated against checkhostname.  */
+#define CFG_BOOTP_RETRY_COUNT 0x40000000 /* # of timeouts before giving up   */
+#define CFG_BOOTP_SHORT_RANDOM_DELAY 1  /* Use a short random delay value    */
+                                        /* (limited to maximum of 1024 msec) */
+#define CFG_CHK_FOR_ABORT_AT_LEAST_ONCE 1
+                                        /* Check for abort key presses       */
+                                        /* at least once in dependent of the */
+                                        /* CONFIG_BOOTDELAY value.           */
+#define CFG_CONSOLE_INFO_QUIET 1        /* Don't print console @ startup     */
+#define CFG_FAULT_ECHO_LINK_DOWN 1      /* Echo the inverted Ethernet link   */
+                                        /* state to the fault LED.           */
+#define CFG_FAULT_MII_ADDR 0x02         /* MII addr of the PHY to check for  */
+                                        /* the Ethernet link state.          */
+#define CFG_STATUS_FLASH_UNTIL_TFTP_OK 1 /* Keeping the status LED flashing  */
+                                        /* until the TFTP is successful.     */
+#define CFG_STATUS_OFF_AFTER_NETBOOT 1  /* After a successful netboot,       */
+                                        /* turn off the STATUS LEDs.         */
+#define CFG_TFTP_BLINK_STATUS_ON_DATA_IN 1 /* Blink status LED based on      */
+                                        /* incoming data.                    */
+#define CFG_TFTP_BLOCKS_PER_HASH 100    /* For every XX blocks, output a '#' */
+                                        /* to signify that tftp is moving.   */
+#define CFG_TFTP_HASHES_PER_FLASH 200   /* For every '#' hashes,             */
+ 				        /* flash the status LED.             */
+#define CFG_TFTP_HASHES_PER_LINE 65     /* Only output XX '#'s per line      */
+                                        /* during the tftp file transfer.    */
+#define CFG_TFTP_PROGESS_QUIET 1        /* Suppress the progress displays    */
+                                        /* '#'s from the tftp command.       */
+#define CFG_TFTP_STATUS_QUIET 1         /* Suppress the status displays      */
+                                        /* issued during the tftp command.   */
+#define CFG_TFTP_TIMEOUT_COUNT 5        /* How many timeouts TFTP will allow */
+					/* before it gives up.               */
+
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
 #else
@@ -734,12 +789,22 @@
  *-----------------------------------------------------------------------
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC |\
+			 SYPCR_BMT  |\
+			 SYPCR_PBME |\
+			 SYPCR_LBME |\
+			 SYPCR_SWRI |\
+			 SYPCR_SWP  |\
+                         SYPCR_SWE)
+#else
 #define CFG_SYPCR	(SYPCR_SWTC |\
 			 SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
 			 SYPCR_SWRI |\
 			 SYPCR_SWP)
+#endif /* CONFIG_WATCHDOG */
 
 /*-----------------------------------------------------------------------
  * TMCNTSC - Time Counter Status and Control			 4-40