diff options
Diffstat (limited to 'SamsungPlatformPkgOrigen/README')
| -rw-r--r-- | SamsungPlatformPkgOrigen/README | 67 |
1 files changed, 0 insertions, 67 deletions
diff --git a/SamsungPlatformPkgOrigen/README b/SamsungPlatformPkgOrigen/README deleted file mode 100644 index b34c1baea..000000000 --- a/SamsungPlatformPkgOrigen/README +++ /dev/null @@ -1,67 +0,0 @@ - -=== SmdkBoard OVERVIEW === - -The SMDK project aims to support firmware for Exynos 4210 Soc using the edk2 -code base. - -=== STATUS === - -Current status: Alpha - -Current capabilities: -* Uefi Boot from SDMMC card - -=== FUTURE PLANS === - -* SUpport for USB - - KeyBoard, Mouse and MassStorage - -=== BUILDING SMDK Board === - -Pre-requisites: -* Build environment capable of build the edk2 MdeModulePkg. -* A properly configured ASL compiler: - - Intel ASL compiler: Available from http://www.acpica.org - - Microsoft ASL compiler: Available from http://www.acpi.info - -Building the iRam_Bl: -The iRam_Bl is the 1st stage bootloader which is executed by the IROM code. -This code is reused from the u-boot project. this image has to be a plane binary image -which will not have any header format. After generating the binary image the checksum is generated -and stored in the same file at a particular offset. that is done by the executable generated with -the iRam_Bl source files. - -To generate the iRAM_Bl image -* Download the u-boot source from git://git.denx.de/u-boot.git by running below command - git clone git://git.denx.de/u-boot.git -* Run following commands - - export ARCH=arm - - export CROSS_COMPILE=/usr/local/arm/gcc-linaro-4.5-2011.03-0/bin/arm-linux-gnueabi- or respective toolchain path - - make smdkv310_config - - make mmc_spl -* the binary "u-boot-mmc-spl.bin" will be generated in the spl directory. -* copy the generated u-boot-mmc-spl.bin to the Uefi Workspace Build/SmdkBoard-Exynos/RELEASE_ARMGCC/FV/ - - -Build the SdmkBoardPkg by running from the Workspace - build -p SamsungPlatformPkg/SmdkBoardPkg/SmdkBoardPkg-Exynos.dsc -a ARM -t ARMGCC -b RELEASE for release version - -Following the edk2 build process, you will find the SMDK binaries -under the $WORKSPACE/Build/*/*/FV directory. You can find the below -mentioned binary image. -* SMDKBOARD_EFI.FD -* u-boot-mmc-spl.bin - -=== RUNNING SmdkBoardPkg on the SMDK v310 board === -* need to be in Linux Environment to do the below procedure -* After inserting the SD card. unmount the card by using the command umount /media/XXXXX. -* copy the u-boot-mmc-spl.bin to the SD/MMC card by using the comand - sudo dd if=Build/SmdkBoard-Exynos/RELEASE_ARMGCC/FV/u-boot-mmc-spl.bin of=/dev/sdc bs=512 seek=1 -* Copy the Uefi Image to SD/MMC with below command from the Workspace. - sudo dd if=Build/SmdkBoard-Exynos/RELEASE_ARMGCC/FV/SMDKBOARD_EFI.fd of=/dev/sdc bs=512 seek=65 -* Now the booting device is ready to be used. -* Insert the SDMMC card in the v310 board reader slot MMC Ch2. -* Connect the Uart cable from the v310 device to the PC terminal. -* POwer ON the Device. -* The boot message should be visible on the termial. -* use option 1 to enter the Embedded Boot loader. |