summaryrefslogtreecommitdiff
path: root/Omap35xxPkg/MMCHSDxe/MMCHS.c
blob: 786bc882731d276656c1caf111c022f1fc954fe9 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
/** @file
  MMC/SD Card driver for OMAP 35xx (SDIO not supported)

  This driver always produces a BlockIo protocol but it starts off with no Media
  present. A TimerCallBack detects when media is inserted or removed and after 
  a media change event a call to BlockIo ReadBlocks/WriteBlocks will cause the 
  media to be detected (or removed) and the BlockIo Media structure will get
  updated. No MMC/SD Card harward registers are updated until the first BlockIo
  ReadBlocks/WriteBlocks after media has been insterted (booting with a card 
  plugged in counts as an insertion event). 

  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
  
  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include "MMCHS.h"

EFI_BLOCK_IO_MEDIA gMMCHSMedia = {
  SIGNATURE_32('s','d','i','o'),            // MediaId
  TRUE,                                     // RemovableMedia
  FALSE,                                    // MediaPresent
  FALSE,                                    // LogicalPartition
  FALSE,                                    // ReadOnly
  FALSE,                                    // WriteCaching
  512,                                      // BlockSize
  4,                                        // IoAlign
  0,                                        // Pad
  0                                         // LastBlock
};

typedef struct {
  VENDOR_DEVICE_PATH  Mmc;
  EFI_DEVICE_PATH     End;
} MMCHS_DEVICE_PATH;

MMCHS_DEVICE_PATH gMmcHsDevicePath = {
  {
    HARDWARE_DEVICE_PATH,
    HW_VENDOR_DP,
    (UINT8)(sizeof(VENDOR_DEVICE_PATH)),
    (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8),
    0xb615f1f5, 0x5088, 0x43cd, 0x80, 0x9c, 0xa1, 0x6e, 0x52, 0x48, 0x7d, 0x00 
  },
  {
    END_DEVICE_PATH_TYPE,
    END_ENTIRE_DEVICE_PATH_SUBTYPE,
    sizeof (EFI_DEVICE_PATH_PROTOCOL),
    0
  }
};

CARD_INFO                  gCardInfo;
EMBEDDED_EXTERNAL_DEVICE   *gTPS65950;
EFI_EVENT                  gTimerEvent;
BOOLEAN                    gMediaChange = FALSE;

//
// Internal Functions
//


VOID
ParseCardCIDData (
  UINT32 Response0, 
  UINT32 Response1, 
  UINT32 Response2,
  UINT32 Response3
  )
{
  gCardInfo.CIDData.MDT = ((Response0 >> 8) & 0xFFF);
  gCardInfo.CIDData.PSN = (((Response0 >> 24) & 0xFF) | ((Response1 & 0xFFFFFF) << 8));
  gCardInfo.CIDData.PRV = ((Response1 >> 24) & 0xFF);
  gCardInfo.CIDData.PNM[4] = ((Response2) & 0xFF);
  gCardInfo.CIDData.PNM[3] = ((Response2 >> 8) & 0xFF);
  gCardInfo.CIDData.PNM[2] = ((Response2 >> 16) & 0xFF);
  gCardInfo.CIDData.PNM[1] = ((Response2 >> 24) & 0xFF);
  gCardInfo.CIDData.PNM[0] = ((Response3) & 0xFF);
  gCardInfo.CIDData.OID = ((Response3 >> 8) & 0xFFFF);
  gCardInfo.CIDData.MID = ((Response3 >> 24) & 0xFF);
}


VOID
UpdateMMCHSClkFrequency (
  UINTN NewCLKD
  )
{
  //Set Clock enable to 0x0 to not provide the clock to the card
  MmioAnd32 (MMCHS_SYSCTL, ~CEN);

  //Set new clock frequency.
  MmioAndThenOr32 (MMCHS_SYSCTL, ~CLKD_MASK, NewCLKD << 6); 

  //Poll till Internal Clock Stable
  while ((MmioRead32 (MMCHS_SYSCTL) & ICS_MASK) != ICS);

  //Set Clock enable to 0x1 to provide the clock to the card
  MmioOr32 (MMCHS_SYSCTL, CEN);
}


EFI_STATUS
SendCmd (
  UINTN Cmd,
  UINTN CmdInterruptEnableVal,
  UINTN CmdArgument
  )
{
  UINTN MmcStatus;
  UINTN RetryCount = 0;

  //Check if command line is in use or not. Poll till command line is available.
  while ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) == DATI_NOT_ALLOWED);

  //Provide the block size.
  MmioWrite32 (MMCHS_BLK, BLEN_512BYTES);

  //Setting Data timeout counter value to max value.
  MmioAndThenOr32 (MMCHS_SYSCTL, ~DTO_MASK, DTO_VAL);

  //Clear Status register.
  MmioWrite32 (MMCHS_STAT, 0xFFFFFFFF);

  //Set command argument register
  MmioWrite32 (MMCHS_ARG, CmdArgument);

  //Enable interrupt enable events to occur
  MmioWrite32 (MMCHS_IE, CmdInterruptEnableVal);

  //Send a command
  MmioWrite32 (MMCHS_CMD, Cmd);

  //Check for the command status.
  while (RetryCount < MAX_RETRY_COUNT) {
    do {
      MmcStatus = MmioRead32 (MMCHS_STAT);
    } while (MmcStatus == 0);

    //Read status of command response
    if ((MmcStatus & ERRI) != 0) {

      //Perform soft-reset for mmci_cmd line.
      MmioOr32 (MMCHS_SYSCTL, SRC);
      while ((MmioRead32 (MMCHS_SYSCTL) & SRC));

      DEBUG ((EFI_D_INFO, "MmcStatus: %x\n", MmcStatus));
      return EFI_DEVICE_ERROR;
    }

    //Check if command is completed.
    if ((MmcStatus & CC) == CC) {
      MmioWrite32 (MMCHS_STAT, CC);
      break;
    }

    RetryCount++;
  }

  if (RetryCount == MAX_RETRY_COUNT) {
    return EFI_TIMEOUT;
  }

  return EFI_SUCCESS;
}


VOID
GetBlockInformation (
  UINTN *BlockSize,
  UINTN *NumBlocks
  )
{
  CSD_SDV2 *CsdSDV2Data;
  UINTN    CardSize;

  if (gCardInfo.CardType == SD_CARD_2_HIGH) {
    CsdSDV2Data = (CSD_SDV2 *)&gCardInfo.CSDData;

    //Populate BlockSize.
    *BlockSize = (0x1UL << CsdSDV2Data->READ_BL_LEN);

    //Calculate Total number of blocks.
    CardSize = CsdSDV2Data->C_SIZELow16 | (CsdSDV2Data->C_SIZEHigh6 << 2);
    *NumBlocks = ((CardSize + 1) * 1024);
  } else {
    //Populate BlockSize.
    *BlockSize = (0x1UL << gCardInfo.CSDData.READ_BL_LEN);

    //Calculate Total number of blocks.
    CardSize = gCardInfo.CSDData.C_SIZELow2 | (gCardInfo.CSDData.C_SIZEHigh10 << 2);
    *NumBlocks = (CardSize + 1) * (1 << (gCardInfo.CSDData.C_SIZE_MULT + 2));
  }

  //For >=2G card, BlockSize may be 1K, but the transfer size is 512 bytes.
  if (*BlockSize > 512) {
    *NumBlocks = MultU64x32(*NumBlocks, *BlockSize/2);
    *BlockSize = 512;
  }

  DEBUG ((EFI_D_INFO, "Card type: %x, BlockSize: %x, NumBlocks: %x\n", gCardInfo.CardType, *BlockSize, *NumBlocks));
}


VOID
CalculateCardCLKD (
  UINTN *ClockFrequencySelect
  )
{
  UINT8    MaxDataTransferRate;
  UINTN    TransferRateValue = 0;
  UINTN    TimeValue = 0 ;
  UINTN    Frequency = 0;

  MaxDataTransferRate = gCardInfo.CSDData.TRAN_SPEED;

  // For SD Cards  we would need to send CMD6 to set
  // speeds abouve 25MHz. High Speed mode 50 MHz and up

  //Calculate Transfer rate unit (Bits 2:0 of TRAN_SPEED)
  switch (MaxDataTransferRate & 0x7) {
    case 0:
      TransferRateValue = 100 * 1000;
      break;

    case 1:
      TransferRateValue = 1 * 1000 * 1000;
      break;

    case 2:
      TransferRateValue = 10 * 1000 * 1000;
      break;

    case 3:
      TransferRateValue = 100 * 1000 * 1000;
      break;

    default:
      DEBUG((EFI_D_ERROR, "Invalid parameter.\n"));
      ASSERT(FALSE);
  }

  //Calculate Time value (Bits 6:3 of TRAN_SPEED)
  switch ((MaxDataTransferRate >> 3) & 0xF) {
    case 1:
      TimeValue = 10;
      break;

    case 2:
      TimeValue = 12;
      break;

    case 3:
      TimeValue = 13;
      break;

    case 4:
      TimeValue = 15;
      break;

    case 5:
      TimeValue = 20;
      break;

    case 6:
      TimeValue = 25;
      break;

    case 7:
      TimeValue = 30;
      break;

    case 8:
      TimeValue = 35;
      break;

    case 9:
      TimeValue = 40;
      break;

    case 10:
      TimeValue = 45;
      break;

    case 11:
      TimeValue = 50;
      break;

    case 12:
      TimeValue = 55;
      break;

    case 13:
      TimeValue = 60;
      break;

    case 14:
      TimeValue = 70;
      break;

    case 15:
      TimeValue = 80;
      break;

    default:
      DEBUG((EFI_D_ERROR, "Invalid parameter.\n"));
      ASSERT(FALSE);
  }

  Frequency = TransferRateValue * TimeValue/10;

  //Calculate Clock divider value to program in MMCHS_SYSCTL[CLKD] field.
  *ClockFrequencySelect = ((MMC_REFERENCE_CLK/Frequency) + 1);

  DEBUG ((EFI_D_INFO, "MaxDataTransferRate: 0x%x, Frequency: %d KHz, ClockFrequencySelect: %x\n", MaxDataTransferRate, Frequency/1000, *ClockFrequencySelect));
}


VOID
GetCardConfigurationData (
  VOID
  )
{
  UINTN  BlockSize;
  UINTN  NumBlocks;
  UINTN  ClockFrequencySelect;

  //Calculate BlockSize and Total number of blocks in the detected card.
  GetBlockInformation(&BlockSize, &NumBlocks);
  gCardInfo.BlockSize = BlockSize;
  gCardInfo.NumBlocks = NumBlocks;

  //Calculate Card clock divider value.
  CalculateCardCLKD(&ClockFrequencySelect);
  gCardInfo.ClockFrequencySelect = ClockFrequencySelect;
}


EFI_STATUS
InitializeMMCHS (
  VOID
  )
{
  UINT8      Data = 0;
  EFI_STATUS Status;

  //Select Device group to belong to P1 device group in Power IC.
  Data = DEV_GRP_P1;
  Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEV_GRP), 1, &Data);
  ASSERT_EFI_ERROR(Status);

  //Configure voltage regulator for MMC1 in Power IC to output 3.0 voltage.
  Data = VSEL_3_00V;
  Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VMMC1_DEDICATED_REG), 1, &Data);
  ASSERT_EFI_ERROR(Status);
  
  //After ramping up voltage, set VDDS stable bit to indicate that voltage level is stable.
  MmioOr32 (CONTROL_PBIAS_LITE, (PBIASLITEVMODE0 | PBIASLITEPWRDNZ0 | PBIASSPEEDCTRL0 | PBIASLITEVMODE1 | PBIASLITEWRDNZ1));

  // Enable WP GPIO
  MmioAndThenOr32 (GPIO1_BASE + GPIO_OE, ~BIT23, BIT23);

  // Enable Card Detect
  Data = CARD_DETECT_ENABLE;
  gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, TPS65950_GPIO_CTRL), 1, &Data);


  return Status;
}


EFI_STATUS
PerformCardIdenfication (
  VOID
  )
{
  EFI_STATUS Status;
  UINTN      CmdArgument = 0;
  UINTN      Response = 0;
  UINTN      RetryCount = 0;
  BOOLEAN    SDCmd8Supported = FALSE;

  //Enable interrupts.
  MmioWrite32 (MMCHS_IE, (BADA_EN | CERR_EN | DEB_EN | DCRC_EN | DTO_EN | CIE_EN |
    CEB_EN | CCRC_EN | CTO_EN | BRR_EN | BWR_EN | TC_EN | CC_EN));

  //Controller INIT procedure start.
  MmioOr32 (MMCHS_CON, INIT);
  MmioWrite32 (MMCHS_CMD, 0x00000000);
  while (!(MmioRead32 (MMCHS_STAT) & CC));

  //Wait for 1 ms
  gBS->Stall(1000);

  //Set CC bit to 0x1 to clear the flag
  MmioOr32 (MMCHS_STAT, CC);

  //Retry INIT procedure.
  MmioWrite32 (MMCHS_CMD, 0x00000000);
  while (!(MmioRead32 (MMCHS_STAT) & CC));

  //End initialization sequence
  MmioAnd32 (MMCHS_CON, ~INIT);

  MmioOr32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_ON));

  //Change clock frequency to 400KHz to fit protocol
  UpdateMMCHSClkFrequency(CLKD_400KHZ);

  MmioOr32 (MMCHS_CON, OD);

  //Send CMD0 command.
  Status = SendCmd (CMD0, CMD0_INT_EN, CmdArgument);
  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "Cmd0 fails.\n"));
    return Status;
  }

  DEBUG ((EFI_D_INFO, "CMD0 response: %x\n", MmioRead32 (MMCHS_RSP10)));

  //Send CMD5 command. 
  Status = SendCmd (CMD5, CMD5_INT_EN, CmdArgument);
  if (Status == EFI_SUCCESS) {
    DEBUG ((EFI_D_ERROR, "CMD5 Success. SDIO card. Follow SDIO card specification.\n"));
    DEBUG ((EFI_D_INFO, "CMD5 response: %x\n", MmioRead32 (MMCHS_RSP10)));
    //NOTE: Returning unsupported error for now. Need to implement SDIO specification.
    return EFI_UNSUPPORTED; 
  } else {
    DEBUG ((EFI_D_INFO, "CMD5 fails. Not an SDIO card.\n"));
  }

  MmioOr32 (MMCHS_SYSCTL, SRC);
  gBS->Stall(1000);
  while ((MmioRead32 (MMCHS_SYSCTL) & SRC));

  //Send CMD8 command. (New v2.00 command for Voltage check)
  //Only 2.7V - 3.6V is supported for SD2.0, only SD 2.0 card can pass.
  //MMC & SD1.1 card will fail this command.
  CmdArgument = CMD8_ARG;
  Status = SendCmd (CMD8, CMD8_INT_EN, CmdArgument);
  if (Status == EFI_SUCCESS) {
    Response = MmioRead32 (MMCHS_RSP10);
    DEBUG ((EFI_D_INFO, "CMD8 success. CMD8 response: %x\n", Response));
    if (Response != CmdArgument) {
      return EFI_DEVICE_ERROR;
    }
    DEBUG ((EFI_D_INFO, "Card is SD2.0\n"));
    SDCmd8Supported = TRUE; //Supports high capacity.
  } else {
    DEBUG ((EFI_D_INFO, "CMD8 fails. Not an SD2.0 card.\n"));
  }

  MmioOr32 (MMCHS_SYSCTL, SRC);
  gBS->Stall(1000);
  while ((MmioRead32 (MMCHS_SYSCTL) & SRC));

  //Poll till card is busy
  while (RetryCount < MAX_RETRY_COUNT) {
    //Send CMD55 command. 
    CmdArgument = 0;
    Status = SendCmd (CMD55, CMD55_INT_EN, CmdArgument);
    if (Status == EFI_SUCCESS) {
      DEBUG ((EFI_D_INFO, "CMD55 success. CMD55 response: %x\n", MmioRead32 (MMCHS_RSP10)));
      gCardInfo.CardType = SD_CARD;
    } else {
      DEBUG ((EFI_D_INFO, "CMD55 fails.\n"));
      gCardInfo.CardType = MMC_CARD;
    }

    //Send appropriate command for the card type which got detected.
    if (gCardInfo.CardType == SD_CARD) {
      CmdArgument = ((UINTN *) &(gCardInfo.OCRData))[0];

      //Set HCS bit.
      if (SDCmd8Supported) {
        CmdArgument |= HCS;
      }

      Status = SendCmd (ACMD41, ACMD41_INT_EN, CmdArgument);
      if (EFI_ERROR(Status)) {
        DEBUG ((EFI_D_INFO, "ACMD41 fails.\n"));
        return Status;
      }
      ((UINT32 *) &(gCardInfo.OCRData))[0] = MmioRead32 (MMCHS_RSP10);
      DEBUG ((EFI_D_INFO, "SD card detected. ACMD41 OCR: %x\n", ((UINT32 *) &(gCardInfo.OCRData))[0]));
    } else if (gCardInfo.CardType == MMC_CARD) {
      CmdArgument = 0;
      Status = SendCmd (CMD1, CMD1_INT_EN, CmdArgument);
      if (EFI_ERROR(Status)) {
        DEBUG ((EFI_D_INFO, "CMD1 fails.\n"));
        return Status;
      }
      Response = MmioRead32 (MMCHS_RSP10);
      DEBUG ((EFI_D_INFO, "MMC card detected.. CMD1 response: %x\n", Response));

      //NOTE: For now, I am skipping this since I only have an SD card.
      //Compare card OCR and host OCR (Section 22.6.1.3.2.4)
      return EFI_UNSUPPORTED; //For now, MMC is not supported.
    }

    //Poll the card until it is out of its power-up sequence.
    if (gCardInfo.OCRData.Busy == 1) {

      if (SDCmd8Supported) {
        gCardInfo.CardType = SD_CARD_2;
      }

      //Card is ready. Check CCS (Card capacity status) bit (bit#30).
      //SD 2.0 standard card will response with CCS 0, SD high capacity card will respond with CCS 1.
      if (gCardInfo.OCRData.AccessMode & BIT1) {
        gCardInfo.CardType = SD_CARD_2_HIGH;
        DEBUG ((EFI_D_INFO, "High capacity card.\n"));
      } else {
        DEBUG ((EFI_D_INFO, "Standard capacity card.\n"));
      }

      break;
    }

    gBS->Stall(1000);
    RetryCount++;
  }

  if (RetryCount == MAX_RETRY_COUNT) {
    DEBUG ((EFI_D_ERROR, "Timeout error. RetryCount: %d\n", RetryCount));
    return EFI_TIMEOUT;
  }

  //Read CID data.
  CmdArgument = 0;
  Status = SendCmd (CMD2, CMD2_INT_EN, CmdArgument);
  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "CMD2 fails. Status: %x\n", Status));
    return Status;
  }

  DEBUG ((EFI_D_INFO, "CMD2 response: %x %x %x %x\n", MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76)));

  //Parse CID register data.
  ParseCardCIDData(MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76));

  //Read RCA
  CmdArgument = 0;
  Status = SendCmd (CMD3, CMD3_INT_EN, CmdArgument);
  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "CMD3 fails. Status: %x\n", Status));
    return Status;
  }

  //Set RCA for the detected card. RCA is CMD3 response.
  gCardInfo.RCA = (MmioRead32 (MMCHS_RSP10) >> 16);
  DEBUG ((EFI_D_INFO, "CMD3 response: RCA %x\n", gCardInfo.RCA));

  //MMC Bus setting change after card identification.
  MmioAnd32 (MMCHS_CON, ~OD);
  MmioOr32 (MMCHS_HCTL, SDVS_3_0_V);
  UpdateMMCHSClkFrequency(CLKD_400KHZ); //Set the clock frequency to 400KHz.

  return EFI_SUCCESS;
}


EFI_STATUS
GetCardSpecificData (
  VOID
  )
{
  EFI_STATUS Status;
  UINTN      CmdArgument;

  //Send CMD9 to retrieve CSD.
  CmdArgument = gCardInfo.RCA << 16;
  Status = SendCmd (CMD9, CMD9_INT_EN, CmdArgument);
  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "CMD9 fails. Status: %x\n", Status));
    return Status;
  }

  //Populate 128-bit CSD register data.
  ((UINT32 *)&(gCardInfo.CSDData))[0] = MmioRead32 (MMCHS_RSP10);
  ((UINT32 *)&(gCardInfo.CSDData))[1] = MmioRead32 (MMCHS_RSP32);
  ((UINT32 *)&(gCardInfo.CSDData))[2] = MmioRead32 (MMCHS_RSP54);
  ((UINT32 *)&(gCardInfo.CSDData))[3] = MmioRead32 (MMCHS_RSP76);

  DEBUG ((EFI_D_INFO, "CMD9 response: %x %x %x %x\n", MmioRead32 (MMCHS_RSP10), MmioRead32 (MMCHS_RSP32), MmioRead32 (MMCHS_RSP54), MmioRead32 (MMCHS_RSP76)));

  //Calculate total number of blocks and max. data transfer rate supported by the detected card.
  GetCardConfigurationData();

  return Status;
}


EFI_STATUS
PerformCardConfiguration (
  VOID
  )
{
  UINTN      CmdArgument = 0;
  EFI_STATUS Status;

  //Send CMD7
  CmdArgument = gCardInfo.RCA << 16;
  Status = SendCmd (CMD7, CMD7_INT_EN, CmdArgument);
  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "CMD7 fails. Status: %x\n", Status));
    return Status;
  }

  if ((gCardInfo.CardType != UNKNOWN_CARD) && (gCardInfo.CardType != MMC_CARD)) {
    // We could read SCR register, but SD Card Phys spec stats any SD Card shall
    // set SCR.SD_BUS_WIDTHS to support 4-bit mode, so why bother?
 
    // Send ACMD6 (application specific commands must be prefixed with CMD55)
    Status = SendCmd (CMD55, CMD55_INT_EN, CmdArgument);
    if (!EFI_ERROR (Status)) {
      // set device into 4-bit data bus mode
      Status = SendCmd (ACMD6, ACMD6_INT_EN, 0x2);
      if (!EFI_ERROR (Status)) {
        // Set host controler into 4-bit mode
        MmioOr32 (MMCHS_HCTL, DTW_4_BIT);
        DEBUG ((EFI_D_INFO, "SD Memory Card set to 4-bit mode\n"));
      }
    }
  }

  //Send CMD16 to set the block length
  CmdArgument = gCardInfo.BlockSize;
  Status = SendCmd (CMD16, CMD16_INT_EN, CmdArgument);
  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "CMD16 fails. Status: %x\n", Status));
    return Status;
  }

  //Change MMCHS clock frequency to what detected card can support.
  UpdateMMCHSClkFrequency(gCardInfo.ClockFrequencySelect);

  return EFI_SUCCESS;
}


EFI_STATUS
ReadBlockData (
  IN  EFI_BLOCK_IO_PROTOCOL       *This,
  OUT VOID                        *Buffer
  )
{
  UINTN MmcStatus;
  UINTN *DataBuffer = Buffer;
  UINTN DataSize = This->Media->BlockSize/4;
  UINTN Count;
  UINTN RetryCount = 0;

  //Check controller status to make sure there is no error.
  while (RetryCount < MAX_RETRY_COUNT) {
    do {
      //Read Status.
      MmcStatus = MmioRead32 (MMCHS_STAT);
    } while(MmcStatus == 0);

    //Check if Buffer read ready (BRR) bit is set?
    if (MmcStatus & BRR) {

      //Clear BRR bit
      MmioOr32 (MMCHS_STAT, BRR);

      //Read block worth of data.
      for (Count = 0; Count < DataSize; Count++) {
        *DataBuffer++ = MmioRead32 (MMCHS_DATA);
      }
      break;
    }
    RetryCount++;
  }

  if (RetryCount == MAX_RETRY_COUNT) {
    return EFI_TIMEOUT;
  }

  return EFI_SUCCESS;
}


EFI_STATUS
WriteBlockData (
  IN  EFI_BLOCK_IO_PROTOCOL       *This,
  OUT VOID                        *Buffer
  )
{
  UINTN MmcStatus;
  UINTN *DataBuffer = Buffer;
  UINTN DataSize = This->Media->BlockSize/4;
  UINTN Count;
  UINTN RetryCount = 0;

  //Check controller status to make sure there is no error.
  while (RetryCount < MAX_RETRY_COUNT) {
    do {
      //Read Status.
      MmcStatus = MmioRead32 (MMCHS_STAT);
    } while(MmcStatus == 0);

    //Check if Buffer write ready (BWR) bit is set?
    if (MmcStatus & BWR) {

      //Clear BWR bit
      MmioOr32 (MMCHS_STAT, BWR);

      //Write block worth of data.
      for (Count = 0; Count < DataSize; Count++) {
        MmioWrite32 (MMCHS_DATA, *DataBuffer++);
      }

      break;
    }
    RetryCount++;
  }

  if (RetryCount == MAX_RETRY_COUNT) {
    return EFI_TIMEOUT;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
DmaBlocks (
  IN EFI_BLOCK_IO_PROTOCOL        *This,
  IN  UINTN                       Lba,
  IN OUT VOID                     *Buffer,
  IN  UINTN                       BlockCount,
  IN  OPERATION_TYPE              OperationType
  )
{
  EFI_STATUS            Status;
  UINTN                 DmaSize = 0;
  UINTN                 Cmd = 0;
  UINTN                 CmdInterruptEnable;
  UINTN                 CmdArgument;
  VOID                  *BufferMap;
  EFI_PHYSICAL_ADDRESS  BufferAddress;
  OMAP_DMA4             Dma4;
  DMA_MAP_OPERATION     DmaOperation;
  EFI_STATUS            MmcStatus;
  UINTN                 RetryCount = 0;

CpuDeadLoop ();
  // Map passed in buffer for DMA xfer
  DmaSize = BlockCount * This->Media->BlockSize;
  Status = DmaMap (DmaOperation, Buffer, &DmaSize, &BufferAddress, &BufferMap);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  ZeroMem (&DmaOperation, sizeof (DMA_MAP_OPERATION));
  

  Dma4.DataType = 2;                      // DMA4_CSDPi[1:0]   32-bit elements from MMCHS_DATA

  Dma4.SourceEndiansim = 0;               // DMA4_CSDPi[21]    

  Dma4.DestinationEndianism = 0;          // DMA4_CSDPi[19]

  Dma4.SourcePacked = 0;                  // DMA4_CSDPi[6]

  Dma4.DestinationPacked = 0;             // DMA4_CSDPi[13]

  Dma4.NumberOfElementPerFrame = This->Media->BlockSize/4; // DMA4_CENi  (TRM 4K is optimum value)  

  Dma4.NumberOfFramePerTransferBlock = BlockCount;         // DMA4_CFNi    

  Dma4.ReadPriority = 0;                  // DMA4_CCRi[6]      Low priority read  

  Dma4.WritePriority = 0;                 // DMA4_CCRi[23]     Prefetech disabled


  //Populate the command information based on the operation type.
  if (OperationType == READ) {
    Cmd = CMD18; //Multiple block read
    CmdInterruptEnable = CMD18_INT_EN;
    DmaOperation = MapOperationBusMasterCommonBuffer;

    Dma4.ReadPortAccessType =0 ;            // DMA4_CSDPi[8:7]   Can not burst MMCHS_DATA reg

    Dma4.WritePortAccessType = 3;           // DMA4_CSDPi[15:14] Memory burst 16x32

    Dma4.WriteMode = 1;                     // DMA4_CSDPi[17:16] Write posted

    

    Dma4.SourceStartAddress = MMCHS_DATA;                   // DMA4_CSSAi

    Dma4.DestinationStartAddress = (UINT32)BufferAddress;   // DMA4_CDSAi

    Dma4.SourceElementIndex = 1;                            // DMA4_CSEi

    Dma4.SourceFrameIndex = 0x200;                          // DMA4_CSFi

    Dma4.DestinationElementIndex = 1;                       // DMA4_CDEi

    Dma4.DestinationFrameIndex = 0;                         // DMA4_CDFi



    Dma4.ReadPortAccessMode = 0;            // DMA4_CCRi[13:12]  Always read MMCHS_DATA

    Dma4.WritePortAccessMode = 1;           // DMA4_CCRi[15:14]  Post increment memory address

    Dma4.ReadRequestNumber = 0x1e;          // DMA4_CCRi[4:0]    Syncro with MMCA_DMA_RX (61)  

    Dma4.WriteRequestNumber = 1;            // DMA4_CCRi[20:19]  Syncro upper 0x3e == 62 (one based)

  } else if (OperationType == WRITE) { 
    Cmd = CMD25; //Multiple block write
    CmdInterruptEnable = CMD25_INT_EN;
    DmaOperation = MapOperationBusMasterRead;

    Dma4.ReadPortAccessType = 3;            // DMA4_CSDPi[8:7]   Memory burst 16x32

    Dma4.WritePortAccessType = 0;           // DMA4_CSDPi[15:14] Can not burst MMCHS_DATA reg

    Dma4.WriteMode = 1;                     // DMA4_CSDPi[17:16] Write posted ???

    

    Dma4.SourceStartAddress = (UINT32)BufferAddress;        // DMA4_CSSAi

    Dma4.DestinationStartAddress = MMCHS_DATA;              // DMA4_CDSAi

    Dma4.SourceElementIndex = 1;                            // DMA4_CSEi

    Dma4.SourceFrameIndex = 0x200;                          // DMA4_CSFi

    Dma4.DestinationElementIndex = 1;                       // DMA4_CDEi

    Dma4.DestinationFrameIndex = 0;                         // DMA4_CDFi



    Dma4.ReadPortAccessMode = 1;            // DMA4_CCRi[13:12]  Post increment memory address

    Dma4.WritePortAccessMode = 0;           // DMA4_CCRi[15:14]  Always write MMCHS_DATA

    Dma4.ReadRequestNumber = 0x1d;          // DMA4_CCRi[4:0]    Syncro with MMCA_DMA_TX (60)  

    Dma4.WriteRequestNumber = 1;            // DMA4_CCRi[20:19]  Syncro upper 0x3d == 61 (one based)

  } else {
    return EFI_INVALID_PARAMETER;
  }


  EnableDmaChannel (2, &Dma4);
  

  //Set command argument based on the card access mode (Byte mode or Block mode)
  if (gCardInfo.OCRData.AccessMode & BIT1) {
    CmdArgument = Lba;
  } else {
    CmdArgument = Lba * This->Media->BlockSize;
  }

  //Send Command.
  Status = SendCmd (Cmd, CmdInterruptEnable, CmdArgument);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "CMD fails. Status: %x\n", Status));
    return Status;
  }

    //Check for the Transfer completion.
  while (RetryCount < MAX_RETRY_COUNT) {
    //Read Status
    do {
      MmcStatus = MmioRead32 (MMCHS_STAT);
    } while (MmcStatus == 0);

    //Check if Transfer complete (TC) bit is set?
    if (MmcStatus & TC) {
      break;
    } else {
      DEBUG ((EFI_D_ERROR, "MmcStatus for TC: %x\n", MmcStatus));
      //Check if DEB, DCRC or DTO interrupt occured.
      if ((MmcStatus & DEB) | (MmcStatus & DCRC) | (MmcStatus & DTO)) {
        //There was an error during the data transfer.

        //Set SRD bit to 1 and wait until it return to 0x0.
        MmioOr32 (MMCHS_SYSCTL, SRD);
        while((MmioRead32 (MMCHS_SYSCTL) & SRD) != 0x0);

        DisableDmaChannel (2, DMA4_CSR_BLOCK, DMA4_CSR_ERR);
        DmaUnmap (BufferMap);
        return EFI_DEVICE_ERROR;
      }
    }
    RetryCount++;
  } 

  DisableDmaChannel (2, DMA4_CSR_BLOCK, DMA4_CSR_ERR);
  Status = DmaUnmap (BufferMap);

  if (RetryCount == MAX_RETRY_COUNT) {
    DEBUG ((EFI_D_ERROR, "TransferBlockData timed out.\n"));
    return EFI_TIMEOUT;
  }

  return Status;
}


EFI_STATUS
TransferBlock (
  IN EFI_BLOCK_IO_PROTOCOL        *This,
  IN  UINTN                       Lba,
  IN OUT VOID                     *Buffer,
  IN  OPERATION_TYPE              OperationType
  )
{
  EFI_STATUS Status;
  UINTN      MmcStatus;
  UINTN      RetryCount = 0;
  UINTN      Cmd = 0;
  UINTN      CmdInterruptEnable = 0;
  UINTN      CmdArgument = 0;


  //Populate the command information based on the operation type.
  if (OperationType == READ) {
    Cmd = CMD17; //Single block read
    CmdInterruptEnable = CMD18_INT_EN;
  } else if (OperationType == WRITE) { 
    Cmd = CMD24; //Single block write
    CmdInterruptEnable = CMD24_INT_EN;
  }

  //Set command argument based on the card access mode (Byte mode or Block mode)
  if (gCardInfo.OCRData.AccessMode & BIT1) {
    CmdArgument = Lba;
  } else {
    CmdArgument = Lba * This->Media->BlockSize;
  }

  //Send Command.
  Status = SendCmd (Cmd, CmdInterruptEnable, CmdArgument);
  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "CMD fails. Status: %x\n", Status));
    return Status;
  }

  //Read or Write data.
  if (OperationType == READ) {
    Status = ReadBlockData (This, Buffer);
    if (EFI_ERROR(Status)) {
      DEBUG((EFI_D_ERROR, "ReadBlockData fails.\n"));
      return Status;
    }
  } else if (OperationType == WRITE) {
    Status = WriteBlockData (This, Buffer);
    if (EFI_ERROR(Status)) {
      DEBUG((EFI_D_ERROR, "WriteBlockData fails.\n"));
      return Status;
    }
  }

  //Check for the Transfer completion.
  while (RetryCount < MAX_RETRY_COUNT) {
    //Read Status
    do {
      MmcStatus = MmioRead32 (MMCHS_STAT);
    } while (MmcStatus == 0);

    //Check if Transfer complete (TC) bit is set?
    if (MmcStatus & TC) {
      break;
    } else {
      DEBUG ((EFI_D_ERROR, "MmcStatus for TC: %x\n", MmcStatus));
      //Check if DEB, DCRC or DTO interrupt occured.
      if ((MmcStatus & DEB) | (MmcStatus & DCRC) | (MmcStatus & DTO)) {
        //There was an error during the data transfer.

        //Set SRD bit to 1 and wait until it return to 0x0.
        MmioOr32 (MMCHS_SYSCTL, SRD);
        while((MmioRead32 (MMCHS_SYSCTL) & SRD) != 0x0);

        return EFI_DEVICE_ERROR;
      }
    }
    RetryCount++;
  } 

  if (RetryCount == MAX_RETRY_COUNT) {
    DEBUG ((EFI_D_ERROR, "TransferBlockData timed out.\n"));
    return EFI_TIMEOUT;
  }

  return EFI_SUCCESS;
}

BOOLEAN
CardPresent (
  VOID
  )
{
  EFI_STATUS  Status;
  UINT8       Data;

  //
  // Card detect is a GPIO0 on the TPS65950
  //
  Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID2, GPIODATAIN1), 1, &Data);
  if (EFI_ERROR (Status)) {
    return FALSE;
  }

  if ((Data & CARD_DETECT_BIT) == CARD_DETECT_BIT) {
    // No Card present
    return FALSE;
  } else {
    return TRUE;
  }
}

EFI_STATUS
DetectCard (
  VOID
  )
{
  EFI_STATUS    Status;

  if (!CardPresent ()) {
    return EFI_NO_MEDIA;
  }

  //Initialize MMC host controller clocks.
  Status = InitializeMMCHS ();
  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "Initialize MMC host controller fails. Status: %x\n", Status));
    return Status;
  }

  //Software reset of the MMCHS host controller.
  MmioWrite32 (MMCHS_SYSCONFIG, SOFTRESET);
  gBS->Stall(1000);
  while ((MmioRead32 (MMCHS_SYSSTATUS) & RESETDONE_MASK) != RESETDONE);

  //Soft reset for all.
  MmioWrite32 (MMCHS_SYSCTL, SRA);
  gBS->Stall(1000);
  while ((MmioRead32 (MMCHS_SYSCTL) & SRA) != 0x0);

  //Voltage capabilities initialization. Activate VS18 and VS30.
  MmioOr32 (MMCHS_CAPA, (VS30 | VS18));

  //Wakeup configuration
  MmioOr32 (MMCHS_SYSCONFIG, ENAWAKEUP);
  MmioOr32 (MMCHS_HCTL, IWE);

  //MMCHS Controller default initialization
  MmioOr32 (MMCHS_CON, (OD | DW8_1_4_BIT | CEATA_OFF));

  MmioWrite32 (MMCHS_HCTL, (SDVS_3_0_V | DTW_1_BIT | SDBP_OFF));

  //Enable internal clock
  MmioOr32 (MMCHS_SYSCTL, ICE);

  //Set the clock frequency to 80KHz.
  UpdateMMCHSClkFrequency (CLKD_80KHZ);

  //Enable SD bus power.
  MmioOr32 (MMCHS_HCTL, (SDBP_ON));

  //Poll till SD bus power bit is set.
  while ((MmioRead32 (MMCHS_HCTL) & SDBP_MASK) != SDBP_ON);

  //Card idenfication
  Status = PerformCardIdenfication ();
  if (EFI_ERROR(Status)) {
    DEBUG ((EFI_D_ERROR, "No MMC/SD card detected.\n"));
    return Status;
  }
  
  //Get CSD (Card specific data) for the detected card.
  Status = GetCardSpecificData();
  if (EFI_ERROR(Status)) {
    return Status;
  }
  
  //Configure the card in data transfer mode.
  Status = PerformCardConfiguration();
  if (EFI_ERROR(Status)) {
    return Status;
  }

  //Patch the Media structure.
  gMMCHSMedia.LastBlock    = (gCardInfo.NumBlocks - 1);
  gMMCHSMedia.BlockSize    = gCardInfo.BlockSize;
  gMMCHSMedia.ReadOnly     = (MmioRead32 (GPIO1_BASE + GPIO_DATAIN) & BIT23) == BIT23;
  gMMCHSMedia.MediaPresent = TRUE; 
  gMMCHSMedia.MediaId++; 

  DEBUG ((EFI_D_INFO, "SD Card Media Change on Handle 0x%08x\n", gImageHandle));

  return Status;
}

#define MAX_MMCHS_TRANSFER_SIZE  0x4000

EFI_STATUS
SdReadWrite (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN  UINTN                   Lba, 
  OUT VOID                    *Buffer, 
  IN  UINTN                   BufferSize,
  IN  OPERATION_TYPE          OperationType
  )
{
  EFI_STATUS Status = EFI_SUCCESS;
  UINTN      RetryCount = 0;
  UINTN      BlockCount;
  UINTN      BytesToBeTranferedThisPass = 0;
  UINTN      BytesRemainingToBeTransfered;
  EFI_TPL    OldTpl;

  BOOLEAN    Update;


  
  Update               = FALSE;

  if (gMediaChange) {
    Update = TRUE;
    Status = DetectCard  ();
    if (EFI_ERROR (Status)) {
      // We detected a removal
      gMMCHSMedia.MediaPresent = FALSE;
      gMMCHSMedia.LastBlock    = 0;
      gMMCHSMedia.BlockSize    = 512;  // Should be zero but there is a bug in DiskIo
      gMMCHSMedia.ReadOnly     = FALSE; 
    }
    gMediaChange             = FALSE;
  } else if (!gMMCHSMedia.MediaPresent) {
    Status = EFI_NO_MEDIA;
    goto Done;
  }

  if (Update) {
    DEBUG ((EFI_D_INFO, "SD Card ReinstallProtocolInterface ()\n"));
    gBS->ReinstallProtocolInterface (
          gImageHandle,
          &gEfiBlockIoProtocolGuid,
          &gBlockIo,
          &gBlockIo
          );
    return EFI_MEDIA_CHANGED;
  }

  if (EFI_ERROR (Status)) {
    goto Done;
  }

  if (Buffer == NULL) {
    Status = EFI_INVALID_PARAMETER;
    goto Done;
  }

  if (Lba > This->Media->LastBlock) {
    Status = EFI_INVALID_PARAMETER;
    goto Done;
  }
  
  if ((BufferSize % This->Media->BlockSize) != 0) {
    Status = EFI_BAD_BUFFER_SIZE;
    goto Done;
  }

  //Check if the data lines are not in use.
  while ((RetryCount++ < MAX_RETRY_COUNT) && ((MmioRead32 (MMCHS_PSTATE) & DATI_MASK) != DATI_ALLOWED));
  if (RetryCount == MAX_RETRY_COUNT) {
    Status = EFI_TIMEOUT;
    goto Done;
  }

  OldTpl = gBS->RaiseTPL (TPL_NOTIFY);

  BytesRemainingToBeTransfered = BufferSize;
  while (BytesRemainingToBeTransfered > 0) {

    if (gMediaChange) {
      Status = EFI_NO_MEDIA;
      DEBUG ((EFI_D_INFO, "SdReadWrite() EFI_NO_MEDIA due to gMediaChange\n"));
      goto DoneRestoreTPL;
    }

    // Turn OFF DMA path until it is debugged
    // BytesToBeTranferedThisPass = (BytesToBeTranferedThisPass >= MAX_MMCHS_TRANSFER_SIZE) ? MAX_MMCHS_TRANSFER_SIZE : BytesRemainingToBeTransfered;
    BytesToBeTranferedThisPass   = This->Media->BlockSize;

    BlockCount = BytesToBeTranferedThisPass/This->Media->BlockSize;

    if (BlockCount > 1) {
      Status = DmaBlocks (This, Lba, Buffer, BlockCount, OperationType);
    } else {
      //Transfer a block worth of data.
      Status = TransferBlock (This, Lba, Buffer, OperationType);
    }

    if (EFI_ERROR(Status)) {
      DEBUG ((EFI_D_ERROR, "TransferBlockData fails. %x\n", Status));
      goto DoneRestoreTPL;
    }

    BytesRemainingToBeTransfered -= BytesToBeTranferedThisPass;
    Lba    += BlockCount;
    Buffer = (UINT8 *)Buffer + This->Media->BlockSize;
  }

DoneRestoreTPL:

  gBS->RestoreTPL (OldTpl);

Done:

  return Status;

}


/**

  Reset the Block Device.



  @param  This                 Indicates a pointer to the calling context.

  @param  ExtendedVerification Driver may perform diagnostics on reset.



  @retval EFI_SUCCESS          The device was reset.

  @retval EFI_DEVICE_ERROR     The device is not functioning properly and could

                               not be reset.



**/
EFI_STATUS
EFIAPI
MMCHSReset (
  IN EFI_BLOCK_IO_PROTOCOL          *This,
  IN BOOLEAN                        ExtendedVerification
  )
{
  return EFI_SUCCESS; 
}


/**

  Read BufferSize bytes from Lba into Buffer.



  @param  This       Indicates a pointer to the calling context.

  @param  MediaId    Id of the media, changes every time the media is replaced.

  @param  Lba        The starting Logical Block Address to read from

  @param  BufferSize Size of Buffer, must be a multiple of device block size.

  @param  Buffer     A pointer to the destination buffer for the data. The caller is

                     responsible for either having implicit or explicit ownership of the buffer.



  @retval EFI_SUCCESS           The data was read correctly from the device.

  @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.

  @retval EFI_NO_MEDIA          There is no media in the device.

  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.

  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

  @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, 

                                or the buffer is not on proper alignment.

EFI_STATUS

**/
EFI_STATUS
EFIAPI
MMCHSReadBlocks (
  IN EFI_BLOCK_IO_PROTOCOL          *This,
  IN UINT32                         MediaId,
  IN EFI_LBA                        Lba,
  IN UINTN                          BufferSize,
  OUT VOID                          *Buffer
  )
{
  EFI_STATUS Status;

  //Perform Read operation.
  Status = SdReadWrite (This, (UINTN)Lba, Buffer, BufferSize, READ);

  return Status;

}


/**

  Write BufferSize bytes from Lba into Buffer.



  @param  This       Indicates a pointer to the calling context.

  @param  MediaId    The media ID that the write request is for.

  @param  Lba        The starting logical block address to be written. The caller is

                     responsible for writing to only legitimate locations.

  @param  BufferSize Size of Buffer, must be a multiple of device block size.

  @param  Buffer     A pointer to the source buffer for the data.



  @retval EFI_SUCCESS           The data was written correctly to the device.

  @retval EFI_WRITE_PROTECTED   The device can not be written to.

  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

  @retval EFI_NO_MEDIA          There is no media in the device.

  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

  @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, 

                                or the buffer is not on proper alignment.



**/
EFI_STATUS
EFIAPI
MMCHSWriteBlocks (
  IN EFI_BLOCK_IO_PROTOCOL          *This,
  IN UINT32                         MediaId,
  IN EFI_LBA                        Lba,
  IN UINTN                          BufferSize,
  IN VOID                           *Buffer
  )
{
  EFI_STATUS  Status;

  //Perform write operation.
  Status = SdReadWrite (This, (UINTN)Lba, Buffer, BufferSize, WRITE);


  return Status;

}


/**

  Flush the Block Device.



  @param  This              Indicates a pointer to the calling context.



  @retval EFI_SUCCESS       All outstanding data was written to the device

  @retval EFI_DEVICE_ERROR  The device reported an error while writting back the data

  @retval EFI_NO_MEDIA      There is no media in the device.



**/
EFI_STATUS
EFIAPI
MMCHSFlushBlocks (
  IN EFI_BLOCK_IO_PROTOCOL  *This
  )
{
  return EFI_SUCCESS;
}


EFI_BLOCK_IO_PROTOCOL gBlockIo = {
  EFI_BLOCK_IO_INTERFACE_REVISION,   // Revision
  &gMMCHSMedia,                      // *Media
  MMCHSReset,                        // Reset
  MMCHSReadBlocks,                   // ReadBlocks
  MMCHSWriteBlocks,                  // WriteBlocks
  MMCHSFlushBlocks                   // FlushBlocks
};


/**

  Timer callback to convert card present hardware into a boolean that indicates

  a media change event has happened. If you just check the GPIO you could see 

  card 1 and then check again after card 1 was removed and card 2 was inserted

  and you would still see media present. Thus you need the timer tick to catch

  the toggle event.



  @param  Event                 Event whose notification function is being invoked.

  @param  Context               The pointer to the notification function's context,

                                which is implementation-dependent. Not used.



**/
VOID
EFIAPI
TimerCallback (
  IN  EFI_EVENT   Event,
  IN  VOID        *Context
  )
{
  BOOLEAN Present;

  Present = CardPresent ();
  if (gMMCHSMedia.MediaPresent) {
    if (!Present && !gMediaChange) {
      gMediaChange = TRUE;
    }
  } else {
    if (Present && !gMediaChange) {
      gMediaChange = TRUE;    
    }
  }
}


EFI_STATUS
EFIAPI
MMCHSInitialize (
  IN EFI_HANDLE         ImageHandle,
  IN EFI_SYSTEM_TABLE   *SystemTable
  )
{
  EFI_STATUS  Status;

  Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950);
  ASSERT_EFI_ERROR(Status);

  ZeroMem (&gCardInfo, sizeof (CARD_INFO));

  Status = gBS->CreateEvent (EVT_TIMER | EVT_NOTIFY_SIGNAL, TPL_CALLBACK, TimerCallback, NULL, &gTimerEvent);
  ASSERT_EFI_ERROR (Status);
 
  Status = gBS->SetTimer (gTimerEvent, TimerPeriodic, FixedPcdGet32 (PcdMmchsTimerFreq100NanoSeconds)); 
  ASSERT_EFI_ERROR (Status);

  //Publish BlockIO.
  Status = gBS->InstallMultipleProtocolInterfaces (
                  &ImageHandle, 
                  &gEfiBlockIoProtocolGuid,    &gBlockIo, 
                  &gEfiDevicePathProtocolGuid, &gMmcHsDevicePath,
                  NULL
                  );
  return Status;
}