diff options
Diffstat (limited to 'ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf')
| -rwxr-xr-x | ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf | 336 |
1 files changed, 336 insertions, 0 deletions
diff --git a/ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf b/ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf new file mode 100755 index 000000000..d9ca65de3 --- /dev/null +++ b/ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf @@ -0,0 +1,336 @@ +#
+# Copyright (c) 2013-2014, ARM Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.BL33_AP_UEFI]
+BaseAddress = 0xE0000000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
+Size = 0x000F0000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize = 0x00001000
+NumBlocks = 0xF0
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+0x00000000|0x000F0000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FvMain]
+BlockSize = 0x40
+NumBlocks = 0 # This FV gets compressed so make it just big enough
+FvAlignment = 8 # FV alignment and FV attributes setting.
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+ INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+ INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
+ INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+
+ #
+ # ACPI Support
+ #
+ INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+ INF RuleOverride=ACPITABLE ArmPlatformPkg/ArmJunoPkg/AcpiTables/AcpiTables.inf
+
+ INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ #
+ # Multiple Console IO support
+ #
+ INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ INF EmbeddedPkg/SerialDxe/SerialDxe.inf
+
+ INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+ INF ArmPlatformPkg/ArmJunoPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf
+
+ # NOR Flash driver
+ INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+
+ # Versatile Express FileSystem
+ INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning
+ #
+ INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ INF FatBinPkg/EnhancedFatDxe/Fat.inf
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+
+ # FV Filesystem^M
+ INF MdeModulePkg/Universal/FvSimpleFilesystemDxe/FvSimpleFilesystemDxe.inf
+
+ #
+ # Usb Support
+ #
+ INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
+ INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
+ INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
+ INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
+ INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf
+
+ #
+ # Networking stack
+ #
+ INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+ INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+ INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
+ INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+ INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+ INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+ INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
+ INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf
+
+ #
+ # UEFI applications
+ #
+ INF ShellBinPkg/UefiShell/UefiShell.inf
+
+ #
+ # Juno platform driver
+ #
+ INF ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.inf
+
+ #
+ # Bds
+ #
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF ArmPlatformPkg/Bds/Bds.inf
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 8
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF ArmPlatformPkg/PrePi/PeiMPCore.inf
+
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+# FILE DRIVER = $(NAMED_GUID) {
+# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+# COMPRESS PI_STD {
+# GUIDED {
+# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+# UI STRING="$(MODULE_NAME)" Optional
+# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+# }
+# }
+# }
+#
+############################################################################
+
+#
+# These SEC rules are used for ArmPlatformPkg/PrePi module.
+# ArmPlatformPkg/PrePi is declared as a SEC module to make GenFv patch the
+# UEFI Firmware to jump to ArmPlatformPkg/PrePi entrypoint
+#
+[Rule.ARM.SEC]
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
+ TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.AARCH64.SEC]
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
+ TE TE Align = 4K $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+# A shim specific rule is required to ensure the alignment is 4K.
+# Otherwise BaseTools pick up the AArch32 alignment (ie: 32)
+[Rule.ARM.SEC.SHIM]
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
+ TE TE Align = 4K $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.PEI_CORE]
+ FILE PEI_CORE = $(NAMED_GUID) {
+ TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING ="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM]
+ FILE PEIM = $(NAMED_GUID) {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM.TIANOCOMPRESSED]
+ FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+ }
+
+[Rule.Common.DXE_CORE]
+ FILE DXE_CORE = $(NAMED_GUID) {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.DXE_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.DXE_RUNTIME_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_APPLICATION]
+ FILE APPLICATION = $(NAMED_GUID) {
+ UI STRING ="$(MODULE_NAME)" Optional
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.UEFI_DRIVER.BINARY]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional |.depex
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.UEFI_APPLICATION.BINARY]
+ FILE APPLICATION = $(NAMED_GUID) {
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.USER_DEFINED.ACPITABLE]
+ FILE FREEFORM = $(NAMED_GUID) {
+ RAW ACPI |.acpi
+ RAW ASL |.aml
+ }
|