diff --git a/py/gc.c b/py/gc.c
index 554b4db..e4be847 100644
--- a/py/gc.c
+++ b/py/gc.c
@@ -105,7 +105,7 @@
     //     F = A * BLOCKS_PER_ATB / BLOCKS_PER_FTB
     //     P = A * BLOCKS_PER_ATB * BYTES_PER_BLOCK
     // => T = A * (1 + BLOCKS_PER_ATB / BLOCKS_PER_FTB + BLOCKS_PER_ATB * BYTES_PER_BLOCK)
-    mp_uint_t total_byte_len = (byte*)end - (byte*)start;
+    size_t total_byte_len = (byte*)end - (byte*)start;
 #if MICROPY_ENABLE_FINALISER
     MP_STATE_MEM(gc_alloc_table_byte_len) = total_byte_len * BITS_PER_BYTE / (BITS_PER_BYTE + BITS_PER_BYTE * BLOCKS_PER_ATB / BLOCKS_PER_FTB + BITS_PER_BYTE * BLOCKS_PER_ATB * BYTES_PER_BLOCK);
 #else
@@ -115,11 +115,11 @@
     MP_STATE_MEM(gc_alloc_table_start) = (byte*)start;
 
 #if MICROPY_ENABLE_FINALISER
-    mp_uint_t gc_finaliser_table_byte_len = (MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB + BLOCKS_PER_FTB - 1) / BLOCKS_PER_FTB;
+    size_t gc_finaliser_table_byte_len = (MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB + BLOCKS_PER_FTB - 1) / BLOCKS_PER_FTB;
     MP_STATE_MEM(gc_finaliser_table_start) = MP_STATE_MEM(gc_alloc_table_start) + MP_STATE_MEM(gc_alloc_table_byte_len);
 #endif
 
-    mp_uint_t gc_pool_block_len = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
+    size_t gc_pool_block_len = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
     MP_STATE_MEM(gc_pool_start) = (byte*)end - gc_pool_block_len * BYTES_PER_BLOCK;
     MP_STATE_MEM(gc_pool_end) = end;
 
@@ -175,7 +175,7 @@
 #define VERIFY_MARK_AND_PUSH(ptr) \
     do { \
         if (VERIFY_PTR(ptr)) { \
-            mp_uint_t _block = BLOCK_FROM_PTR(ptr); \
+            size_t _block = BLOCK_FROM_PTR(ptr); \
             if (ATB_GET_KIND(_block) == AT_HEAD) { \
                 /* an unmarked head, mark it, and push it on gc stack */ \
                 ATB_HEAD_TO_MARK(_block); \
@@ -194,7 +194,7 @@
         size_t block = *--MP_STATE_MEM(gc_sp);
 
         // work out number of consecutive blocks in the chain starting with this one
-        mp_uint_t n_blocks = 0;
+        size_t n_blocks = 0;
         do {
             n_blocks += 1;
         } while (ATB_GET_KIND(block + n_blocks) == AT_TAIL);
@@ -214,7 +214,7 @@
         MP_STATE_MEM(gc_sp) = MP_STATE_MEM(gc_stack);
 
         // scan entire memory looking for blocks which have been marked but not their children
-        for (mp_uint_t block = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
+        for (size_t block = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
             // trace (again) if mark bit set
             if (ATB_GET_KIND(block) == AT_MARK) {
                 *MP_STATE_MEM(gc_sp)++ = block;
@@ -303,8 +303,8 @@
     info->num_1block = 0;
     info->num_2block = 0;
     info->max_block = 0;
-    for (mp_uint_t block = 0, len = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
-        mp_uint_t kind = ATB_GET_KIND(block);
+    for (size_t block = 0, len = 0; block < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; block++) {
+        size_t kind = ATB_GET_KIND(block);
         if (kind == AT_FREE || kind == AT_HEAD) {
             if (len == 1) {
                 info->num_1block += 1;
@@ -342,7 +342,7 @@
 }
 
 void *gc_alloc(size_t n_bytes, bool has_finaliser) {
-    mp_uint_t n_blocks = ((n_bytes + BYTES_PER_BLOCK - 1) & (~(BYTES_PER_BLOCK - 1))) / BYTES_PER_BLOCK;
+    size_t n_blocks = ((n_bytes + BYTES_PER_BLOCK - 1) & (~(BYTES_PER_BLOCK - 1))) / BYTES_PER_BLOCK;
     DEBUG_printf("gc_alloc(" UINT_FMT " bytes -> " UINT_FMT " blocks)\n", n_bytes, n_blocks);
 
     // check if GC is locked
@@ -355,10 +355,10 @@
         return NULL;
     }
 
-    mp_uint_t i;
-    mp_uint_t end_block;
-    mp_uint_t start_block;
-    mp_uint_t n_free = 0;
+    size_t i;
+    size_t end_block;
+    size_t start_block;
+    size_t n_free = 0;
     int collected = !MP_STATE_MEM(gc_auto_collect_enabled);
     for (;;) {
 
@@ -400,7 +400,7 @@
 
     // mark rest of blocks as used tail
     // TODO for a run of many blocks can make this more efficient
-    for (mp_uint_t bl = start_block + 1; bl <= end_block; bl++) {
+    for (size_t bl = start_block + 1; bl <= end_block; bl++) {
         ATB_FREE_TO_TAIL(bl);
     }
 
@@ -454,7 +454,7 @@
     DEBUG_printf("gc_free(%p)\n", ptr);
 
     if (VERIFY_PTR(ptr)) {
-        mp_uint_t block = BLOCK_FROM_PTR(ptr);
+        size_t block = BLOCK_FROM_PTR(ptr);
         if (ATB_GET_KIND(block) == AT_HEAD) {
             #if MICROPY_ENABLE_FINALISER
             FTB_CLEAR(block);
@@ -483,10 +483,10 @@
 
 size_t gc_nbytes(const void *ptr) {
     if (VERIFY_PTR(ptr)) {
-        mp_uint_t block = BLOCK_FROM_PTR(ptr);
+        size_t block = BLOCK_FROM_PTR(ptr);
         if (ATB_GET_KIND(block) == AT_HEAD) {
             // work out number of consecutive blocks in the chain starting with this on
-            mp_uint_t n_blocks = 0;
+            size_t n_blocks = 0;
             do {
                 n_blocks += 1;
             } while (ATB_GET_KIND(block + n_blocks) == AT_TAIL);
@@ -551,7 +551,7 @@
     }
 
     // get first block
-    mp_uint_t block = BLOCK_FROM_PTR(ptr);
+    size_t block = BLOCK_FROM_PTR(ptr);
 
     // sanity check the ptr is pointing to the head of a block
     if (ATB_GET_KIND(block) != AT_HEAD) {
@@ -559,7 +559,7 @@
     }
 
     // compute number of new blocks that are requested
-    mp_uint_t new_blocks = (n_bytes + BYTES_PER_BLOCK - 1) / BYTES_PER_BLOCK;
+    size_t new_blocks = (n_bytes + BYTES_PER_BLOCK - 1) / BYTES_PER_BLOCK;
 
     // Get the total number of consecutive blocks that are already allocated to
     // this chunk of memory, and then count the number of free blocks following
@@ -567,10 +567,10 @@
     // free blocks to satisfy the realloc.  Note that we need to compute the
     // total size of the existing memory chunk so we can correctly and
     // efficiently shrink it (see below for shrinking code).
-    mp_uint_t n_free   = 0;
-    mp_uint_t n_blocks = 1; // counting HEAD block
-    mp_uint_t max_block = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
-    for (mp_uint_t bl = block + n_blocks; bl < max_block; bl++) {
+    size_t n_free   = 0;
+    size_t n_blocks = 1; // counting HEAD block
+    size_t max_block = MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB;
+    for (size_t bl = block + n_blocks; bl < max_block; bl++) {
         byte block_type = ATB_GET_KIND(bl);
         if (block_type == AT_TAIL) {
             n_blocks++;
@@ -595,7 +595,7 @@
     // check if we can shrink the allocated area
     if (new_blocks < n_blocks) {
         // free unneeded tail blocks
-        for (mp_uint_t bl = block + new_blocks, count = n_blocks - new_blocks; count > 0; bl++, count--) {
+        for (size_t bl = block + new_blocks, count = n_blocks - new_blocks; count > 0; bl++, count--) {
             ATB_ANY_TO_FREE(bl);
         }
 
@@ -614,7 +614,7 @@
     // check if we can expand in place
     if (new_blocks <= n_blocks + n_free) {
         // mark few more blocks as used tail
-        for (mp_uint_t bl = block + n_blocks; bl < block + new_blocks; bl++) {
+        for (size_t bl = block + n_blocks; bl < block + new_blocks; bl++) {
             assert(ATB_GET_KIND(bl) == AT_FREE);
             ATB_FREE_TO_TAIL(bl);
         }
@@ -665,18 +665,18 @@
 }
 
 void gc_dump_alloc_table(void) {
-    static const mp_uint_t DUMP_BYTES_PER_LINE = 64;
+    static const size_t DUMP_BYTES_PER_LINE = 64;
     #if !EXTENSIVE_HEAP_PROFILING
     // When comparing heap output we don't want to print the starting
     // pointer of the heap because it changes from run to run.
     mp_printf(&mp_plat_print, "GC memory layout; from %p:", MP_STATE_MEM(gc_pool_start));
     #endif
-    for (mp_uint_t bl = 0; bl < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; bl++) {
+    for (size_t bl = 0; bl < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB; bl++) {
         if (bl % DUMP_BYTES_PER_LINE == 0) {
             // a new line of blocks
             {
                 // check if this line contains only free blocks
-                mp_uint_t bl2 = bl;
+                size_t bl2 = bl;
                 while (bl2 < MP_STATE_MEM(gc_alloc_table_byte_len) * BLOCKS_PER_ATB && ATB_GET_KIND(bl2) == AT_FREE) {
                     bl2++;
                 }
diff --git a/py/mpstate.h b/py/mpstate.h
index e9e3860..c7604e0 100644
--- a/py/mpstate.h
+++ b/py/mpstate.h
@@ -48,7 +48,7 @@
     #endif
 
     byte *gc_alloc_table_start;
-    mp_uint_t gc_alloc_table_byte_len;
+    size_t gc_alloc_table_byte_len;
     #if MICROPY_ENABLE_FINALISER
     byte *gc_finaliser_table_start;
     #endif
@@ -56,8 +56,8 @@
     byte *gc_pool_end;
 
     int gc_stack_overflow;
-    mp_uint_t gc_stack[MICROPY_ALLOC_GC_STACK_SIZE];
-    mp_uint_t *gc_sp;
+    size_t gc_stack[MICROPY_ALLOC_GC_STACK_SIZE];
+    size_t *gc_sp;
     uint16_t gc_lock_depth;
 
     // This variable controls auto garbage collection.  If set to 0 then the
@@ -65,10 +65,10 @@
     // you can still allocate/free memory and also explicitly call gc_collect.
     uint16_t gc_auto_collect_enabled;
 
-    mp_uint_t gc_last_free_atb_index;
+    size_t gc_last_free_atb_index;
 
     #if MICROPY_PY_GC_COLLECT_RETVAL
-    mp_uint_t gc_collected;
+    size_t gc_collected;
     #endif
 } mp_state_mem_t;