blob: 87f4281a4b6439b7a6c3097303798db6807eb5e2 [file] [log] [blame]
Vineet Guptafbd70532013-01-18 15:12:20 +05301/* Page Fault Handling for ARC (TLB Miss / ProtV)
2 *
3 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 */
9
10#include <linux/signal.h>
11#include <linux/interrupt.h>
12#include <linux/sched.h>
13#include <linux/errno.h>
14#include <linux/ptrace.h>
Vineet Guptafbd70532013-01-18 15:12:20 +053015#include <linux/uaccess.h>
16#include <linux/kdebug.h>
17#include <asm/pgalloc.h>
18
Vineet Gupta40a89402013-11-02 17:47:49 +053019static int handle_vmalloc_fault(unsigned long address)
Vineet Guptafbd70532013-01-18 15:12:20 +053020{
21 /*
22 * Synchronize this task's top level page-table
23 * with the 'reference' page table.
24 */
25 pgd_t *pgd, *pgd_k;
26 pud_t *pud, *pud_k;
27 pmd_t *pmd, *pmd_k;
28
Vineet Gupta40a89402013-11-02 17:47:49 +053029 pgd = pgd_offset_fast(current->active_mm, address);
Vineet Guptafbd70532013-01-18 15:12:20 +053030 pgd_k = pgd_offset_k(address);
31
32 if (!pgd_present(*pgd_k))
33 goto bad_area;
34
35 pud = pud_offset(pgd, address);
36 pud_k = pud_offset(pgd_k, address);
37 if (!pud_present(*pud_k))
38 goto bad_area;
39
40 pmd = pmd_offset(pud, address);
41 pmd_k = pmd_offset(pud_k, address);
42 if (!pmd_present(*pmd_k))
43 goto bad_area;
44
45 set_pmd(pmd, *pmd_k);
46
47 /* XXX: create the TLB entry here */
48 return 0;
49
50bad_area:
51 return 1;
52}
53
54void do_page_fault(struct pt_regs *regs, int write, unsigned long address,
55 unsigned long cause_code)
56{
57 struct vm_area_struct *vma = NULL;
58 struct task_struct *tsk = current;
59 struct mm_struct *mm = tsk->mm;
60 siginfo_t info;
61 int fault, ret;
62 unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
63 (write ? FAULT_FLAG_WRITE : 0);
64
65 /*
66 * We fault-in kernel-space virtual memory on-demand. The
67 * 'reference' page table is init_mm.pgd.
68 *
69 * NOTE! We MUST NOT take any locks for this case. We may
70 * be in an interrupt or a critical region, and should
71 * only copy the information from the master page table,
72 * nothing more.
73 */
74 if (address >= VMALLOC_START && address <= VMALLOC_END) {
Vineet Gupta40a89402013-11-02 17:47:49 +053075 ret = handle_vmalloc_fault(address);
Vineet Guptafbd70532013-01-18 15:12:20 +053076 if (unlikely(ret))
77 goto bad_area_nosemaphore;
78 else
79 return;
80 }
81
82 info.si_code = SEGV_MAPERR;
83
84 /*
85 * If we're in an interrupt or have no user
86 * context, we must not take the fault..
87 */
88 if (in_atomic() || !mm)
89 goto no_context;
90
91retry:
92 down_read(&mm->mmap_sem);
93 vma = find_vma(mm, address);
94 if (!vma)
95 goto bad_area;
96 if (vma->vm_start <= address)
97 goto good_area;
98 if (!(vma->vm_flags & VM_GROWSDOWN))
99 goto bad_area;
100 if (expand_stack(vma, address))
101 goto bad_area;
102
103 /*
104 * Ok, we have a good vm_area for this memory access, so
105 * we can handle it..
106 */
107good_area:
108 info.si_code = SEGV_ACCERR;
109
110 /* Handle protection violation, execute on heap or stack */
111
112 if (cause_code == ((ECR_V_PROTV << 16) | ECR_C_PROTV_INST_FETCH))
113 goto bad_area;
114
115 if (write) {
116 if (!(vma->vm_flags & VM_WRITE))
117 goto bad_area;
118 } else {
119 if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
120 goto bad_area;
121 }
122
Vineet Guptafbd70532013-01-18 15:12:20 +0530123 /*
124 * If for any reason at all we couldn't handle the fault,
125 * make sure we exit gracefully rather than endlessly redo
126 * the fault.
127 */
128 fault = handle_mm_fault(mm, vma, address, flags);
129
130 /* If Pagefault was interrupted by SIGKILL, exit page fault "early" */
131 if (unlikely(fatal_signal_pending(current))) {
132 if ((fault & VM_FAULT_ERROR) && !(fault & VM_FAULT_RETRY))
133 up_read(&mm->mmap_sem);
134 if (user_mode(regs))
135 return;
136 }
137
138 if (likely(!(fault & VM_FAULT_ERROR))) {
139 if (flags & FAULT_FLAG_ALLOW_RETRY) {
140 /* To avoid updating stats twice for retry case */
141 if (fault & VM_FAULT_MAJOR)
142 tsk->maj_flt++;
143 else
144 tsk->min_flt++;
145
146 if (fault & VM_FAULT_RETRY) {
147 flags &= ~FAULT_FLAG_ALLOW_RETRY;
148 flags |= FAULT_FLAG_TRIED;
149 goto retry;
150 }
151 }
152
153 /* Fault Handled Gracefully */
154 up_read(&mm->mmap_sem);
155 return;
156 }
157
158 /* TBD: switch to pagefault_out_of_memory() */
159 if (fault & VM_FAULT_OOM)
160 goto out_of_memory;
161 else if (fault & VM_FAULT_SIGBUS)
162 goto do_sigbus;
163
164 /* no man's land */
165 BUG();
166
167 /*
168 * Something tried to access memory that isn't in our memory map..
169 * Fix it, but check if it's kernel or user first..
170 */
171bad_area:
172 up_read(&mm->mmap_sem);
173
174bad_area_nosemaphore:
175 /* User mode accesses just cause a SIGSEGV */
176 if (user_mode(regs)) {
177 tsk->thread.fault_address = address;
178 tsk->thread.cause_code = cause_code;
179 info.si_signo = SIGSEGV;
180 info.si_errno = 0;
181 /* info.si_code has been set above */
182 info.si_addr = (void __user *)address;
183 force_sig_info(SIGSEGV, &info, tsk);
184 return;
185 }
186
187no_context:
188 /* Are we prepared to handle this kernel fault?
189 *
190 * (The kernel has valid exception-points in the source
191 * when it acesses user-memory. When it fails in one
192 * of those points, we find it in a table and do a jump
193 * to some fixup code that loads an appropriate error
194 * code)
195 */
196 if (fixup_exception(regs))
197 return;
198
199 die("Oops", regs, address, cause_code);
200
201out_of_memory:
Vineet Guptafbd70532013-01-18 15:12:20 +0530202 up_read(&mm->mmap_sem);
203
Johannes Weinerb13a714f2013-07-08 15:59:50 -0700204 if (user_mode(regs)) {
205 pagefault_out_of_memory();
206 return;
207 }
Vineet Guptafbd70532013-01-18 15:12:20 +0530208
209 goto no_context;
210
211do_sigbus:
212 up_read(&mm->mmap_sem);
213
214 if (!user_mode(regs))
215 goto no_context;
216
217 tsk->thread.fault_address = address;
218 tsk->thread.cause_code = cause_code;
219 info.si_signo = SIGBUS;
220 info.si_errno = 0;
221 info.si_code = BUS_ADRERR;
222 info.si_addr = (void __user *)address;
223 force_sig_info(SIGBUS, &info, tsk);
224}