sparc: join the remaining header files
With this commit all sparc64 header files are moved to asm-sparc.
The remaining files (71 files) were too different to be trivially
merged so divide them up in a _32.h and a _64.h file which
are both included from the file with no bit size.
The following script were used:
cd include
FILES=`wc -l asm-sparc64/*h | grep -v '^ 1' | cut -b 20-`
for FILE in ${FILES}; do
echo $FILE:
BASE=`echo $FILE | cut -d '.' -f 1`
FN32=${BASE}_32.h
FN64=${BASE}_64.h
GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
git mv asm-sparc/$FILE asm-sparc/$FN32
git mv asm-sparc64/$FILE asm-sparc/$FN64
echo git mv done
printf "#ifndef %s\n" $GUARD > asm-sparc/$FILE
printf "#define %s\n" $GUARD >> asm-sparc/$FILE
printf "#if defined(__sparc__) && defined(__arch64__)\n" >> asm-sparc/$FILE
printf "#include <asm-sparc/%s>\n" $FN64 >> asm-sparc/$FILE
printf "#else\n" >> asm-sparc/$FILE
printf "#include <asm-sparc/%s>\n" $FN32 >> asm-sparc/$FILE
printf "#endif\n" >> asm-sparc/$FILE
printf "#endif\n" >> asm-sparc/$FILE
git add asm-sparc/$FILE
echo new file done
printf "#include <asm-sparc/%s>\n" $FILE > asm-sparc64/$FILE
git add asm-sparc64/$FILE
echo sparc64 file done
done
The guard contains three '_' to avoid conflict with existing guards.
In additing the two Kbuild files are emptied to avoid breaking
headers_* targets.
We will reintroduce the exported header files when the necessary
kbuild changes are merged.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/include/asm-sparc/timer_32.h b/include/asm-sparc/timer_32.h
new file mode 100644
index 0000000..361e538
--- /dev/null
+++ b/include/asm-sparc/timer_32.h
@@ -0,0 +1,107 @@
+/*
+ * timer.h: Definitions for the timer chips on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+
+#ifndef _SPARC_TIMER_H
+#define _SPARC_TIMER_H
+
+#include <asm/system.h> /* For SUN4M_NCPUS */
+#include <asm/sun4paddr.h>
+#include <asm/btfixup.h>
+
+/* Timer structures. The interrupt timer has two properties which
+ * are the counter (which is handled in do_timer in sched.c) and the limit.
+ * This limit is where the timer's counter 'wraps' around. Oddly enough,
+ * the sun4c timer when it hits the limit wraps back to 1 and not zero
+ * thus when calculating the value at which it will fire a microsecond you
+ * must adjust by one. Thanks SUN for designing such great hardware ;(
+ */
+
+/* Note that I am only going to use the timer that interrupts at
+ * Sparc IRQ 10. There is another one available that can fire at
+ * IRQ 14. Currently it is left untouched, we keep the PROM's limit
+ * register value and let the prom take these interrupts. This allows
+ * L1-A to work.
+ */
+
+struct sun4c_timer_info {
+ __volatile__ unsigned int cur_count10;
+ __volatile__ unsigned int timer_limit10;
+ __volatile__ unsigned int cur_count14;
+ __volatile__ unsigned int timer_limit14;
+};
+
+#define SUN4C_TIMER_PHYSADDR 0xf3000000
+#ifdef CONFIG_SUN4
+#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
+#else
+#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
+#endif
+
+/* A sun4m has two blocks of registers which are probably of the same
+ * structure. LSI Logic's L64851 is told to _decrement_ from the limit
+ * value. Aurora behaves similarly but its limit value is compacted in
+ * other fashion (it's wider). Documented fields are defined here.
+ */
+
+/* As with the interrupt register, we have two classes of timer registers
+ * which are per-cpu and master. Per-cpu timers only hit that cpu and are
+ * only level 14 ticks, master timer hits all cpus and is level 10.
+ */
+
+#define SUN4M_PRM_CNT_L 0x80000000
+#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00
+
+struct sun4m_timer_percpu_info {
+ __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */
+ __volatile__ unsigned int l14_cur_count;
+
+ /* This register appears to be write only and/or inaccessible
+ * on Uni-Processor sun4m machines.
+ */
+ __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */
+
+ __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */
+ __volatile__ unsigned char space[PAGE_SIZE - 16];
+};
+
+struct sun4m_timer_regs {
+ struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
+ volatile unsigned int l10_timer_limit;
+ volatile unsigned int l10_cur_count;
+
+ /* Again, this appears to be write only and/or inaccessible
+ * on uni-processor sun4m machines.
+ */
+ volatile unsigned int l10_limit_noclear;
+
+ /* This register too, it must be magic. */
+ volatile unsigned int foobar;
+
+ volatile unsigned int cfg; /* equals zero at boot time... */
+};
+
+#define SUN4D_PRM_CNT_L 0x80000000
+#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00
+
+struct sun4d_timer_regs {
+ volatile unsigned int l10_timer_limit;
+ volatile unsigned int l10_cur_countx;
+ volatile unsigned int l10_limit_noclear;
+ volatile unsigned int ctrl;
+ volatile unsigned int l10_cur_count;
+};
+
+extern struct sun4d_timer_regs *sun4d_timers;
+
+extern __volatile__ unsigned int *master_l10_counter;
+extern __volatile__ unsigned int *master_l10_limit;
+
+/* FIXME: Make do_[gs]ettimeofday btfixup calls */
+BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
+#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
+
+#endif /* !(_SPARC_TIMER_H) */