[SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC
Updated pci id table with device, vendor, subdevice and subvendor ids
for 8081, 8088, 8089 SAS/SATA controllers. Added SPCv/ve related macros.
Updated macros, hba info structure and other structures for SPCv/ve.
Update of structure and variable names for SPC hardware functionalities.
Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 1100820..37a339e 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -173,6 +173,7 @@
};
struct pm8001_chip_info {
+ u32 encrypt;
u32 n_phy;
const struct pm8001_dispatch *dispatch;
};
@@ -256,7 +257,20 @@
struct mpi_mem region[USI_MAX_MEMCNT];
};
-struct main_cfg_table {
+struct encrypt {
+ u32 cipher_mode;
+ u32 sec_mode;
+ u32 status;
+ u32 flag;
+};
+
+struct sas_phy_attribute_table {
+ u32 phystart1_16[16];
+ u32 outbound_hw_event_pid1_16[16];
+};
+
+union main_cfg_table {
+ struct {
u32 signature;
u32 interface_rev;
u32 firmware_rev;
@@ -292,19 +306,67 @@
u32 fatal_err_dump_length1;
u32 hda_mode_flag;
u32 anolog_setup_table_offset;
+ u32 rsvd[4];
+ } pm8001_tbl;
+
+ struct {
+ u32 signature;
+ u32 interface_rev;
+ u32 firmware_rev;
+ u32 max_out_io;
+ u32 max_sgl;
+ u32 ctrl_cap_flag;
+ u32 gst_offset;
+ u32 inbound_queue_offset;
+ u32 outbound_queue_offset;
+ u32 inbound_q_nppd_hppd;
+ u32 rsvd[10];
+ u32 upper_event_log_addr;
+ u32 lower_event_log_addr;
+ u32 event_log_size;
+ u32 event_log_severity;
+ u32 upper_pcs_event_log_addr;
+ u32 lower_pcs_event_log_addr;
+ u32 pcs_event_log_size;
+ u32 pcs_event_log_severity;
+ u32 fatal_err_interrupt;
+ u32 fatal_err_dump_offset0;
+ u32 fatal_err_dump_length0;
+ u32 fatal_err_dump_offset1;
+ u32 fatal_err_dump_length1;
+ u32 gpio_led_mapping;
+ u32 analog_setup_table_offset;
+ u32 int_vec_table_offset;
+ u32 phy_attr_table_offset;
+ u32 port_recovery_timer;
+ u32 interrupt_reassertion_delay;
+ } pm80xx_tbl;
};
-struct general_status_table {
+
+union general_status_table {
+ struct {
u32 gst_len_mpistate;
u32 iq_freeze_state0;
u32 iq_freeze_state1;
u32 msgu_tcnt;
u32 iop_tcnt;
- u32 reserved;
+ u32 rsvd;
u32 phy_state[8];
- u32 reserved1;
- u32 reserved2;
- u32 reserved3;
+ u32 gpio_input_val;
+ u32 rsvd1[2];
u32 recover_err_info[8];
+ } pm8001_tbl;
+ struct {
+ u32 gst_len_mpistate;
+ u32 iq_freeze_state0;
+ u32 iq_freeze_state1;
+ u32 msgu_tcnt;
+ u32 iop_tcnt;
+ u32 rsvd[9];
+ u32 gpio_input_val;
+ u32 rsvd1[2];
+ u32 recover_err_info[8];
+ } pm80xx_tbl;
};
struct inbound_queue_table {
u32 element_pri_size_cnt;
@@ -351,15 +413,21 @@
struct device *dev;
struct pm8001_hba_memspace io_mem[6];
struct mpi_mem_req memoryMap;
+ struct encrypt encrypt_info; /* support encryption */
void __iomem *msg_unit_tbl_addr;/*Message Unit Table Addr*/
void __iomem *main_cfg_tbl_addr;/*Main Config Table Addr*/
void __iomem *general_stat_tbl_addr;/*General Status Table Addr*/
void __iomem *inbnd_q_tbl_addr;/*Inbound Queue Config Table Addr*/
void __iomem *outbnd_q_tbl_addr;/*Outbound Queue Config Table Addr*/
- struct main_cfg_table main_cfg_tbl;
- struct general_status_table gs_tbl;
- struct inbound_queue_table inbnd_q_tbl[PM8001_MAX_INB_NUM];
- struct outbound_queue_table outbnd_q_tbl[PM8001_MAX_OUTB_NUM];
+ void __iomem *pspa_q_tbl_addr;
+ /*MPI SAS PHY attributes Queue Config Table Addr*/
+ void __iomem *ivt_tbl_addr; /*MPI IVT Table Addr */
+ union main_cfg_table main_cfg_tbl;
+ union general_status_table gs_tbl;
+ struct inbound_queue_table inbnd_q_tbl[PM8001_MAX_SPCV_INB_NUM];
+ struct outbound_queue_table outbnd_q_tbl[PM8001_MAX_SPCV_OUTB_NUM];
+ struct sas_phy_attribute_table phy_attr_table;
+ /* MPI SAS PHY attributes */
u8 sas_addr[SAS_ADDR_SIZE];
struct sas_ha_struct *sas;/* SCSI/SAS glue */
struct Scsi_Host *shost;
@@ -372,10 +440,12 @@
struct pm8001_port port[PM8001_MAX_PHYS];
u32 id;
u32 irq;
+ u32 iomb_size; /* SPC and SPCV IOMB size */
struct pm8001_device *devices;
struct pm8001_ccb_info *ccb_info;
#ifdef PM8001_USE_MSIX
- struct msix_entry msix_entries[16];/*for msi-x interrupt*/
+ struct msix_entry msix_entries[PM8001_MAX_MSIX_VEC];
+ /*for msi-x interrupt*/
int number_of_intr;/*will be used in remove()*/
#endif
#ifdef PM8001_USE_TASKLET